Mech PDF

ANNA UNIVERSITY, CHENNAI
UNIVERSITY DEPARTMENTS
REGULATIONS 2015
CHOICE BASED CREDIT SYSTEM
B.E. MECHANICAL ENGINEERING
PROGRAMME EDUCATIONAL OBJECTIVES (PEOs) :

I. To prepare students to excel in Mechanical Engineering profession.
II. To provide students with a solid foundation in mathematical, scientific and engineering
fundamentals required to solve industrial and societal problems.
III. To train students with good scientific and engineering knowledge so as to comprehend,
analyze, design and develop innovative products and provide solutions for the real life
problems.
IV. To inculcate students with professional and ethical attitude, effective communication skills,
teamwork skills and multidisciplinary approach.
V. To develop students with academic excellence and leadership qualities for a successful
professional career.
PROGRAMME OUTCOMES (POs):

On successful completion of the programme,
1. Graduates will demonstrate knowledge of mathematics, science and engineering.
2. Graduates will demonstrate ability to identify, formulate and solve engineering problems.
3. Graduates will demonstrate ability to experiment, analyze and interpret data.
4. Graduates will demonstrate ability to design a system, component, product and process as
per needs and specifications.
5. Graduates will demonstrate skills to use modern engineering tools, software and
equipments to analyze multidisciplinary problems.
6. Graduates will demonstrate knowledge of professional and ethical responsibilities.
7. Graduates will communicate effectively their technical knowledge.
8. Graduates will understand the impact of engineering solutions on societal transformation.
9. Graduates will develop ability for life-long learning.
Mapping PEO with POs:
Programme
Educational PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9
Objectives
I
II
III
IV
V
MAPPING OF COURSE OUTCOMES WITH PROGRAMME OUTCOMES:
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9
SEM 1 Foundational English
Mathematics I
Engineering Physics
Engineering Chemistry
Engineering Graphics
Basic Sciences Laboratory
Engineering Practices
YEAR 1
Laboratory
SEM 2 Technical English
Mathematics II
Computing Techniques
Engineering Mechanics
Manufacturing TechnologyI
Manufacturing Technology
Laboratory - I
Computer Practices Laboratory
SEM 3 Partial Differential Equations
Strength of Materials
Fluid Mechanics and Machinery
YEAR 2
Electronics Engineering
Basic Electrical Engineering and
Measurements
Engineering Thermodynamics
Fluid Mechanics and Strength of
Materials Laboratory
Electrical and Electronics
Engineering Laboratory
SEM 4 Environmental Science and
Engineering
Numerical Methods
Kinematics of Machines
Thermal EngineeringI
Manufacturing TechnologyII
Engineering Materials and
Metallurgy
Thermal Engineering
LaboratoryI
Manufacturing Technology
LaboratoryII
SEM 5 Design of Machine Elements
Metrology and Measurements
Thermal EngineeringII
Hydraulics and Pneumatics
YEAR 3
Dynamics of Machines
Computer Aided Machine
Drawing
Metrology and Dynamics
Laboratory
SEM 6 Design of Transmission Systems
Heat and Mass Transfer
Mechatronics
Computer Aided Design
Thermal Engineering
LaboratoryII
Communication Skills and Soft
Skills
SEM 7 Power Plant Engineering
Computer Integrated
Manufacturing
Finite Element Analysis
YEAR 4
Creative and Innovative Project

Simulation and Analysis
Laboratory
Mechatronics Laboratory
SEM 8 Project Work
ANNA UNIVERSITY, CHENNAI
UNIVERSITY DEPARTMENTS
B.E. MECHANICAL ENGINEERING
REGULATIONS 2015
CHOICE BASED CREDIT SYSTEM
CURRICULA AND SYLLABI I - VIII SEMESTERS
SEMESTER I
SL. COURSE COURSE TITLE CATEGORY CONTACT

NO CODE L T P C
PERIODS
THEORY
1. HS7151 Foundational English HS 4 4 0 0 4
2. MA7151 Mathematics I BS 4 4 0 0 4
3. PH7151 Engineering Physics BS 3 3 0 0 3
4. CY7151 Engineering Chemistry BS 3 3 0 0 3
5. GE7152 Engineering Graphics ES 5 3 2 0 4
PRACTICAL
6. BS7161 Basic Sciences BS 4 0 0 4 2
Laboratory
7. GE7162 Engineering Practices ES 4 0 0 4 2
Laboratory
TOTAL 27 17 2 8 22
SEMESTER II
SL. COURSE COURSE TITLE CATEGORY CONTACT

No CODE L T P C
PERIODS
THEORY
1. HS7251 Technical English HS 4 4 0 0 4
2. MA7251 Mathematics II BS 4 4 0 0 4
3. GE7151 Computing ES 3 3 0 0 3
Techniques
4. GE7153 Engineering ES 4 4 0 0 4
Mechanics
5. ME7252 Manufacturing PC 3 3 0 0 3
TechnologyI
PRACTICAL
6. ME7261 Manufacturing PC 4 0 0 4 2
Technology
Laboratory - I
7. GE7161 Computer Practices ES 4 0 0 4 2
Laboratory
TOTAL 26 18 0 8 22
5
SEMESTER III
SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C

NO. CODE PERIODS
THEORY
1. CE7251 Strength of Materials ES 3 3 0 0 3
2. CE7352 Fluid Mechanics and ES 3 3 0 0 3
Machinery
3. EC7354 Electronics Engineering ES 3 3 0 0 3
4. EE7251 Basic Electrical Engineering ES 3 3 0 0 3
and Measurements
5. MA7302 Partial Differential Equations BS 4 4 0 0 4
6. ME7301 Engineering Thermodynamics PC 4 4 0 0 4
PRACTICAL
7. CE7312 Fluid Mechanics and Strength ES 4 0 0 4 2
of Materials Laboratory
8. EE7261 Electrical and Electronics ES 4 0 0 4 2
TOTAL 28 20 0 8 24
SEMESTER IV

NO. CODE PERIODS
THEORY
1. GE7251 Environmental Science and HS 3 3 0 0 3
Engineering
2. MA7354 Numerical Methods BS 4 4 0 0 4
3. ME7352 Manufacturing TechnologyII PC 3 3 0 0 3
4. ME7401 Kinematics of Machines PC 3 3 0 0 3
5. ME7402 Thermal EngineeringI PC 3 3 0 0 3
6. ML7451 Engineering Materials and PC 3 3 0 0 3
Metallurgy
PRACTICAL
7. ME7361 Manufacturing Technology PC 4 0 0 4 2
LaboratoryII
8. ME7411 Thermal Engineering PC 4 0 0 4 2
LaboratoryI
TOTAL 27 19 0 8 23
6
SEMESTER V

No CODE PERIODS
THEORY
1. ME7501 Dynamics of Machines PC 4 4 0 0 4
2. ME7502 Metrology and PC 3 3 0 0 3
Measurements
3. ME7503 Thermal EngineeringII PC 3 3 0 0 3
4. ME7552 Design of Machine PC 4 4 0 0 4
Elements
5. ME7553 Hydraulics and PC 3 3 0 0 3
Pneumatics
6. Professional Elective-I PE 3 3 0 0 3
PRACTICAL
7. ME7511 Metrology and Dynamics PC 4 0 0 4 2
Laboratory
8. ME7561 Computer Aided Machine ES 4 0 0 4 2
Drawing
TOTAL 28 20 0 8 24
SEMESTER VI
SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
THEORY
1. ME7354 Mechatronics PC 3 3 0 0 3
2. ME7551 Computer Aided Design PC 3 3 0 0 3
3. ME7601 Design of Transmission PC 4 4 0 0 4
Systems
4. ME7602 Heat and Mass Transfer PC 4 4 0 0 4
5. Professional Elective - II PE 3 3 0 0 3
6. Open Elective-I* OE 3 3 0 0 3
PRACTICAL
7. HS7561 Communication Skills and HS 3 1 0 2 2
Soft Skills
8. ME7611 Thermal Engineering PC 4 0 0 4 2
LaboratoryII
TOTAL 27 21 0 6 24
7
SEMESTER VII
SL. COURSE CONTACT

NO. CODE PERIODS
THEORY
1. ME7355 Power Plant Engineering PC 3 3 0 0 3
2. ME7701 Computer Integrated PC 3 3 0 0 3

Manufacturing
3. ME7751 Finite Element Analysis PC 3 3 0 0 3
4. Professional Elective-III PE 3 3 0 0 3
5. Professional Elective-IV PE 3 3 0 0 3
6. Open Elective-II* OE 3 3 0 0 3
PRACTICAL
7. ME7711 Creative and Innovative EEC 4 0 0 4 2
Project#
8. ME7712 Simulation and Analysis PC 4 0 0 4 2
Laboratory
9. ME7761 Mechatronics Laboratory PC 4 0 0 4 2
TOTAL 30 18 0 12 24
SEMESTER VIII

NO. CODE PERIODS
THEORY
1. Professional Elective-V PE 3 3 0 0 3
2. Professional Elective-VI PE 3 3 0 0 3
PRACTICAL
3. ME7811 Project Work EEC 20 0 0 20 10
TOTAL 26 6 0 20 16
TOTAL NO. OF CREDITS:179
*Course from the curriculum of other UG Programmes

## The contact periods will not appear in the slot time table
8
HUMANITIES AND SOCIAL SCIENCES (HS)
SL. COURSE CONTACT

NO. CODE PERIODS
1. HS7151 Foundational English HS 4 4 0 0 4
2. HS7251 Technical English HS 4 4 0 0 4
3. GE7251 Environmental Science and HS 3 3 0 0 3
Engineering
4. HS7561 Communication Skills and
HS 3 1 0 2 2
Soft Skills
BASIC SCIENCES (BS)

SL. COURSE CONTACT
NO. CODE PERIODS
1. MA7151 Mathematics I BS 4 4 0 0 4
2. PH7151 Engineering Physics BS 3 3 0 0 3
3. CY7151 Engineering Chemistry BS 3 3 0 0 3
4. BS7161 Basic Sciences Laboratory BS 4 0 0 4 2
5. MA7251 Mathematics II BS 4 4 0 0 4
6. MA7302 Partial Differential Equations BS 4 4 0 0 4
7. MA7354 Numerical Methods BS 4 4 0 0 4
ENGINEERING SCIENCES (ES)
SL. COURSE CONTACT

NO. CODE PERIODS
1. GE7152 Engineering Graphics ES 5 3 2 0 4
2. GE7162 Engineering Practices
ES 4 0 0 4 2
Laboratory
3. GE7151 Computing Techniques ES 3 3 0 0 3
4. GE7161 Computer Practice Laboratory ES 4
0 0 4 2
5. GE7153 Engineering Mechanics ES 4 4 0 0 4
6. CE7251 Strength of Materials ES 3 3 0 0 3
7. CE7352 Fluid Mechanics and
ES 3 3 0 0 3
Machinery
8. EC7354 Electronics Engineering ES 3 3 0 0 3
9. EE7251 Basic Electrical Engineering
ES 3 3 0 0 3
and Measurements
10. CE7312 Fluid Mechanics and Strength
ES 4 0 0 4 2
of Materials Laboratory
11. EE7261 Electrical and Electronics
ES 4 0 0 4 2
12. ME7561 Computer Aided Machine
ES 4 0 0 4 2
Drawing
9
PROFESSIONAL CORE (PC)
SL. COURSE CONTACT

NO. CODE PERIODS
1. ME7252 Manufacturing TechnologyI PC 3 3 0 0 3
2. ME7261 Manufacturing Technology
PC 4 0 0 4 2
Laboratory - I
3. ME7301 Engineering Thermodynamics PC 4 4 0 0 4
4. ME7401 Kinematics of Machines PC 3 3 0 0 3
5. ME7402 Thermal EngineeringI PC 3 3 0 0 3
6. ME7352 Manufacturing TechnologyII PC 3 3 0 0 3
7. ML7451 Engineering Materials and
PC 3 3 0 0 3
Metallurgy
8. ME7411 Thermal Engineering
LaboratoryI PC 4 0 0 4 2
9. ME7361 Manufacturing Technology
PC 4 0 0 4 2
LaboratoryII
10. ME7552 Design of Machine Elements PC 4 4 0 0 4
11. ME7502 Metrology and Measurements PC 3 3 0 0 3
12. ME7503 Thermal EngineeringII PC 3 3 0 0 3
13. ME7553 Hydraulics and Pneumatics PC 3 3 0 0 3
14. ME7501 Dynamics of Machines PC 4 4 0 0 4
15. ME7511 Metrology and Dynamics
PC 4 0 0 4 2
Laboratory
16. ME7601 Design of Transmission
PC 4 4 0 0 4
Systems
17. ME7602 Heat and Mass Transfer PC 4 4 0 0 4
18. ME7354 Mechatronics PC 3 3 0 0 3
19. ME7551 Computer Aided Design PC 3 3 0 0 3
20. ME7761 Mechatronics Laboratory PC 4 0 0 4 2
21. ME7611 Thermal Engineering
PC 4 0 0 4 2
LaboratoryII
22. ME7355 Power Plant Engineering PC 3 3 0 0 3
23. ME7701 Computer Integrated
PC 3 3 0 0 3
Manufacturing
24. ME7751 Finite Element Analysis PC 3 3 0 0 3
25. ME7712 Simulation and Analysis
PC 4 0 0 4 2
Laboratory
PROFESSIONAL ELECTIVES (PE)

SL. COURSE CONTACT
NO. CODE PERIODS
1. GE7071 Disaster Management PE 3 3 0 0 3
2. GE7074 Human Rights PE 3 3 0 0 3
3. IE7451 Production and Operations 3 0 0 3
PE 3
Management
4. MA7352 Applied Statistics PE 4 4 0 0 4
5. ME7001 Advanced Internal Combustion 3 0 0 3
PE 3
Engineering
6. ME7002 Advanced Metrology PE 3 3 0 0 3
10
7. ME7003 Casting and Welding 3 0 0 3
PE 3
Processes
8. ME7004 Composite Materials and 3 0 0 3
PE 3
Mechanics
9. ME7006 Engineering Management PE 3 3 0 0 3
10. ME7007 Gas Dynamics and Space 3 0 0 3
PE 3
Propulsion
11. ME7008 Machine Vision PE 3 3 0 0 3
12. ME7009 Measurements and Controls PE 3 3 0 0 3
13. ME7010 Mechanical Vibrations and 3 0 0 3
PE 3
Noise Control
14. ME7011 MEMS and Microsystems PE 3 3 0 0 3
15. ME7012 Microcontroller and Embedded 3 0 0 3
PE 3
Systems
16. ME7013 New and Renewable Sources 3 0 0 3
PE 3
of Energy
17. ME7014 Non-Destructive Materials 3 0 0 3
PE 3
Evaluation
18. ME7015 Principles of Robotics PE 3 3 0 0 3
19. ME7016 Refrigeration and Air 3 0 0 3
PE 3
Conditioning
20. ME7017 Statistical Process Control and 3 0 0 3
PE 3
Reliability Engineering
21. ME7018 Theory of Metal Forming PE 3 3 0 0 3
22. ME7019 Turbo Machinery PE 3 3 0 0 3
23. ME7071 Automobile Engineering PE 3 3 0 0 3
24. ME7072 Computational Techniques for 3 0 0 3
PE 3
Fluid Dynamics
25. ME7073 Design for Manufacturing PE 3 3 0 0 3
26. ME7074 Design of Heat Exchangers PE 3 3 0 0 3
27. ME7075 Design of Pressure Vessels 3 0 0 3
PE 3
and Piping
28. ME7076 Energy Conservation in 3 0 0 3
PE 3
Industries
29. ME7077 Entrepreneurship Development PE 3 3 0 0 3
30. ME7078 Introduction to Operations 3 0 0 3
PE 3
Research
31. ME7079 Lean Six Sigma PE 3 3 0 0 3
32. ME7080 Marketing Management PE 3 3 0 0 3
33. ME7081 Process Planning and Cost 3 0 0 3
PE 3
Estimation
34. ME7082 Product Design and 3 0 0 3
PE 3
Development
35. ME7083 Sustainable and Green 3 0 0 3
PE 3
Manufacturing
36. ME7351 Design Concepts in 3 0 0 3
PE 3
Engineering
37. ME7603 Design of Jigs, Fixtures and 3 0 0 3
PE 3
Press Tools
38. MF7071 Additive Manufacturing 3 0 0 3
PE 3
Technology
39. MF7651 Non-Traditional Machining 3 0 0 3
PE 3
Processes
11
EMPLOYABILITY ENHANCEMENT COURSES (EEC)
SL. COURSE CONTACT

NO. CODE PERIODS
1. ME7711 Creative and Innovative
Project EEC 4 0 0 4 2
2. ME7811 Project Work
EEC 20 0 0 20 10
12
SUMMARY
CREDITS
SL. SUBJECT CREDITS AS PER SEMESTER
TOTAL
NO. AREA
I II III IV V VI VII VIII
1. HS 4 4 - 3 - - - - 11
2. BS 12 4 4 4 - - - - 24
3. ES 6 9 16 - 2 - - - 33
4. PC - 5 4 16 19 16 13 - 73
5. PE - - - - 3 3 6 6 18
6. OE - - - - - 3 3 - 6
7. EEC - - - - - 2 2 10 14
Total 22 22 24 23 24 24 24 16 179
8. Non Credit /
Mandatory
13
HS7151 FOUNDATIONAL ENGLISH LT PC
4 0 04
COURSE DESCRIPTION:
This course aims at developing the language skills necessary for the first year students of
Engineering and Technology.
OBJECTIVES:
To develop the four language skills Listening, Speaking, Reading and Writing.
To improve the students communicative competence in English.
To teach students the various aspects of English language usage.
CONTENTS
UNIT I GREETING AND INTRODUCING ONESELF 12
Listening- Types of listening Listening to short talks, conversations; Speaking Speaking
about ones place, important festivals etc. Introducing oneself, ones family/ friend;Reading
Skimming a passage Scanning for specific information;Writing- Guided writing - Free writing on
any given topic ( My favourite place/ Hobbies/ School life, writing about ones leisure time
activities, hometown, etc.); Grammar Tenses (present and present continuous) -Question types
- Regular and irregular verbs; Vocabulary Synonyms and Antonyms.
UNIT II GIVING INSTRUCTIONS AND DIRECTIONS 12

Listening Listening and responding to instructions; Speaking Telephone etiquette - Giving
oral instructions/ Describing a process Asking and answering questions; Reading Reading and
finding key information in a given text - Critical reading - Writing Process description( non-
technical)- Grammar Tense (simple past& past continuous) - Use of imperatives Subject
verb agreement Active and passive voice; - Vocabulary Compound words Word formation
Word expansion ( root words).
UNIT III READING AND UNDERSTANDING VISUAL MATERIAL 12

Listening- Listening to lectures/ talks and completing a task; Speaking Role play/ Simulation
Group interaction; Reading Reading and interpreting visual material;Writing- Jumbled
sentences Discourse markers and Cohesive devices Essay writing (cause & effect/
narrative);Grammar Tenses (perfect), Conditional clauses Modal verbs; Vocabulary Cause
and effect words; Phrasal verbs in context.
UNIT IV CRITICAL READING AND WRITING 12

Listening- Watching videos/ documentaries and responding to questions based on them;
SpeakingInformal and formal conversation;Reading Critical reading (prediction &
inference);WritingEssay writing ( compare & contrast/ analytical) Interpretation of visual
materials;Grammar Tenses (future time reference);Vocabulary One word substitutes (with
meanings) Use of abbreviations & acronyms Idioms in sentences.
UNIT V LETTER WRITING AND SENDING E-MAILS 12

Listening- Listening to programmes/broadcast/ telecast/ podcast;Speaking Giving impromptu
talks, Making presentations on given topics- Discussion on the presentation;Reading Extensive
reading;Writing- Poster making Letter writing (Formal and E-mail) ;Grammar Direct and
Indirect speech Combining sentences using connectives;Vocabulary Collocation;
TEACHING METHODS:
Interactive sessions for the speaking module.
Use of audio visual aids for the various listening activities.
Contextual Grammar Teaching.
EVALUATION PATTERN:
Internals 50%
End Semester 50%
TOTAL:60 PERIODS
14
OUTCOMES:
Students will improve their reading and writing skills
Students will become fluent and proficient in communicative English
Students will be able to improve their interpersonal communication
TEXT BOOK:
1. Richards, Jack.C with Jonathan Hull and Susan Proctor New Interchange : English for
International Communication. (level2, Students Book) Cambridge University
Press,New Delhi: 2010.
REFERENCES:
1. Bailey, Stephen. Academic Writing: A practical guide for students. New York:
Rutledge,2011.
2. Morgan, David and Nicholas Regan. Take-Off: Technical English for Engineering.
London: Garnet Publishing Limited, 2008.
3. Redston, Chris & Gillies Cunningham Face2Face (Pre-intermediate Students Book&
Workbook) Cambridge University Press, New Delhi: 2005
4. Comfort, Jeremy, et al. Speaking Effectively : Developing Speaking Skillsfor Business
English. Cambridge University Press, Cambridge: Reprint 2011.
MA7151 MATHEMATICS I L T P C
(Common to all branches of B.E. / B.Tech. Programmes in 4 0 0 4
I Semester)
OBJECTIVES:
The goal of this course is for students to gain proficiency in calculus computations.
In calculus, we use three main tools for analyzing and describing the behavior of
functions: limits, derivatives, and integrals. Students will use these tools to solve
application problems in a variety of settings ranging from physics and biology to
business and economics.
To make the student acquire sound knowledge of techniques in solving ordinary
differential equations that model engineering problems.
To familiarize the student with functions of several variables. This is needed in many
branches of engineering.
To acquaint the student with mathematical tools needed in evaluating multiple
integrals and their usage.
UNIT I DIFFERENTIAL CALCULUS 12

Representation of functions - New functions from old functions - Limit of a function - Limits at
infinity - Continuity - Derivatives - Differentiation rules - Polar coordinate system -
Differentiation in polar coordinates - Maxima and Minima of functions of one variable.
UNIT II FUNCTIONS OF SEVERAL VARIABLES 12
Partial derivatives Homogeneous functions and Eulers theorem Total derivative
Differentiation of implicit funns Change of variables Jacobians Partial differentiation of
implicit functions Taylors series for functions of two variables Errors and approximations
Maxima and minima of functions of two variables Lagranges method of undetermined
multipliers.
UNIT III INTEGRAL CALCULUS 12

Definite and Indefinite integrals - Substitution rule - Techniques of Integration - Integration by
parts, Trigonometric integrals, Trigonometric substitutions, Integration of rational functions by
partial fraction, Integration of irrational functions - Improper integrals.
15
UNIT IV MULTIPLE INTEGRALS 12
Double integrals Change of order of integration Double integrals in polar coordinates
Area enclosed by plane curves Triple integrals Volume of solids Change of variables in
double and triple integrals.
UNIT V DIFFERENTIAL EQUATIONS 12

Method of variation of parameters Method of undetermined coefficients Homogenous
equation of Eulers and Legendres type System of simultaneous linear differential
equations with constant coefficients.
TOTAL: 60 PERIODS
OUTCOMES:
Understanding of the ideas of limits and continuity and an ability to calculate with
them and apply them.
Improved facility in algebraic manipulation.
Fluency in differentiation.
Fluency in integration using standard methods, including the ability to find an
appropriate method for a given integral.
Understanding the ideas of differential equations and facility in solving simple
standard examples.
TEXT BOOKS:
1. James Stewart, "Calculus with Early Transcendental Functions", Cengage Learning,
New Delhi, 2008.
2. Narayanan S. and Manicavachagom Pillai T. K., Calculus" Volume I and II, S.
Viswanathan Publishers Pvt. Ltd., Chennai, 2007.
3. Erwin Kreyszig, "Advanced Engineering Mathematics", John Wiley and Sons, 9th Edition,
New Delhi, 2014.
4. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers, New Delhi, 43rd
Edition, 2014.
REFERENCES:
1. Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill Co. Ltd., New Delhi,
11th Reprint, 2010.
2. Jain R.K. and Iyengar S.R.K., Advanced Engineering Mathematics, Narosa
Publications, New Delhi, 3rd Edition, 2007.
3. Bali N., Goyal M. and Watkins C., Advanced Engineering Mathematics, Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
4. Greenberg M.D., Advanced Engineering Mathematics, Pearson Education, New Delhi,
2nd Edition, 5th Reprint, 2009.
5. Peter V.ONeil, Advanced Engineering Mathematics, Cengage Learning India Pvt., Ltd,
New Delhi, 2007.
16
PH7151 ENGINEERING PHYSICS L T P C
(Common to all branches of B.E / B.Tech programmes) 3 0 0 3
OBJECTIVE:
To introduce the basic physics concepts relevant to different branches of Engineering and
Technology.
UNIT I PROPERTIES OF MATTER 9

Elasticity Poissons ratio and relationship between moduli (qualitative) - stress-strain diagram for
ductile and brittle materials, uses - factors affecting elastic modulus and tensile strength - bending
of beams - cantilever - bending moment - Youngs modulus determination - theory and experiment
- uniform and non-uniform bending - I shaped girders - twisting couple - hollow cylinder - shaft -
torsion pendulum - determination of rigidity modulus- moment of inertia of a body (regular and
irregular).
UNIT II ACOUSTICS AND ULTRASONICS 9

Classification of sound - loudness and intensity - Weber-Fechner Law - standard intensity and
intensity level - decibel - reverberation - reverberation time - calculation of reverberation time for
different types of buildings sound absorbing materials - factors affecting acoustics of buildings :
focussing, interference, echo, echelon effect, resonance - noise and their remedies. Ultrasonics:
production - magnetostriction and piezoelectric methods - detection of ultrasound - acoustic
grating ultrasonic interferometer - industrial applications Non-destructive testing - ultrasonic
method: scan modes and practice.
UNIT III THERMAL AND MODERN PHYSICS 9

Thermal expansion - thermal stress - expansion joints - bimetallic strips - thermal conductivity-
heat conductions in solids flow of heat through compound media - Forbes and Lees disc
method: theory and experiment- Black body radiation Plancks theory (derivation) Compton
effect wave model of radiation and matter Schrdingers wave equation time dependent and
independent equations Physical significance of wave function particle in a one dimensional
box.
UNIT IV APPLIED OPTICS 9

Interference - Michelson interferometer: construction, working, determination of wave length and
thickness - anti-reflection coating - air wedge and its applications - Lasers principle and
applications Einsteins coefficients CO2 and Nd:YAG laser - semiconductor lasers: homo
junction and hetro junction - construction and working applications. Optical fibres - classification
(index & mode based) - principle and propagation of light in optical fibres - acceptance angle and
numerical aperture - fibre optic communication system - active and passive sensors.
UNIT V CRYSTAL PHYSICS 9

Single crystalline, polycrystalline and amorphous materials Single crystals: unit cell, crystal
systems, Bravais lattices, ditections and planes in a crystal, Miller indices - interplanar distance for
a cubic crystal - coordination number and packing factor for SC, BCC, FCC, HCP and diamond
structures - structure and significance of NaCl, CsCl, ZnS and graphite - crystal imperfections:
point defects, line defects Burger vectors, dislocations and stacking faults Growth of single
crystals: Bridgman and Czochralski methods.
TOTAL: 45 PERIODS
OUTCOME:
The students will acquire knowledge on the basics of physics related to properties of matter,
optics, acoustics etc., and they will apply these fundamental principles to solve practical
problems related to materials used for engineering applications.
TEXT BOOKS:
1. Gaur R.K. and Gupta S.L., Engineering Physics, Dhanpat Rai Publications (2013)
2. Palanisamy P.K., Engineering Physics, Scitech Publications (P) Ltd. (2006).
3. Arumugam M., Engineering Physics, Anuradha Publications (2000)
17
REFERENCES:
1. Serway R.A. and Jewett, J.W. Physics for Scientists and Engineers with Modern Physics.
Brooks/cole Publishing Co. (2010).
2. Tipler P.A. and Mosca, G.P., Physics for Scientists and Engineers with Modern Physics.
W.H.Freeman, (2007).
3. Markert J.T.,Ohanian, H. and Ohanian, M. Physics for Engineers and Scientists.
W.W.Norton & Co. (2007).
CY7151 ENGINEERING CHEMISTRY L T P C

3 0 0 3
OBJECTIVE
To develop an understanding about fundamentals of polymer chemistry.
Brief elucidation on surface chemistry and catalysis.
To develop sound knowledge photochemistry and spectroscopy.
To impart basic knowledge on chemical thermodynamics.
To understand the basic concepts of nano chemistry.
UNIT I POLYMER CHEMISTRY 9
Introduction: Functionality-degree of polymerization. Classification of polymers- natural and
synthetic, thermoplastic and thermosetting. Types and mechanism of polymerization: addition
(free radical, cationic, anionic and living); condensation and copolymerization. Properties of
polymers: Tg, tacticity, molecular weight-weight average, number average and polydispersity
index. Techniques of polymerization: Bulk, emulsion, solution and suspension.
UNIT II SURFACE CHEMISTRYAND CATALYSIS 9

Adsorption-Types of adsorption-adsorption of gases on solids- adsorption from solutions-
Types of isothermsFrendlich adsorption isotherm,Langmuir adsorption isotherm.Industrial
applications of adsorption. Catalysis: Characteristics and types of catalysts-homogeneous
and heterogeneous, auto catalysis. Enzyme catalysis -factors affecting enzyme catalysis,
Michaelis-Menton equation.Industrial applications of catalysts.
UNIT III PHOTOCHEMISTRY AND SPECTROSCOPY 9

Photochemistry: Laws of photochemistry-Grotthuss-Draper law, Stark-Einstein law and
Lambert-Beer Law. Photo processes-internal conversion, inter-system crossing,
fluorescence, phosphorescence, chemiluminescence and photo-sensitization. Spectroscopy:
Electromagnetic spectrum-absorption of radiation-electronic, vibrational and rotational
transitions. Width and intensities of spectral lines.Spectrophotometric estimation of iron.UV-
Vis and IR spectroscopy- principles, instrumentation (Block diagram) and applications.
UNIT IV CHEMICAL THERMODYNAMICS 9

Second law: Entropy-entropy change for an ideal gas, reversible and irreversible processes;
entropy of phase transitions; Free energy and work function: Helmholtzand Gibbs free energy
functions; Criteria of spontaneity; Gibbs-Helmholtz equation; Clausius Clapeyron equation;
Maxwell relations-Vant Hoff isotherm and isochore. Chemical potential; Gibbs-Duhem
equation- variation of chemical potential with temperature and pressure.
UNIT V NANOCHEMISTRY 9
Basics-distinction between molecules, nanoparticles and bulk materials; size-dependent
properties.Preparation of nanoparticles sol-gel and solvothermal.Preparation of carbon
nanotube by chemical vapour deposition and laser ablation.Preparation of nanowires by VLS
growth, electrochemical deposition and electro spinning.Properties and uses of nanoparticles,
nanoclusters, nanorods, nanotubes and nanowires.
TOTAL: 45 PERIODS
18
OUTCOMES
Will be familiar with polymer chemistry, surface chemistry and catalysis.
Will know the photochemistry, spectroscopy and chemical thermodynamics.
Will know the fundamentals of nano chemistry.
TEXT BOOKS
1. Jain P. C. & Monica Jain., Engineering Chemistry, DhanpatRai Publishing Company
(P) Ltd, New Delhi, 2014.
2. Kannan P., Ravikrishnan A., Engineering Chemistry, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, 2014
REFERENCES
1. Pahari A., Chauhan B., Engineering Chemistry, Firewall Media, New Delhi, 2012.
2. Sivasankar B., Engineering Chemistry, Tata McGraw-Hill Publishing Company Ltd,
New Delhi, 2012.
3. AshimaSrivastava. Janhavi N N, Concepts of Engineering Chemistry, ACME Learning
Private Limited., New Delhi., 2010.
4. Vairam S., Kalyani P., Suba Ramesh., Engineering Chemistry, Wiley India Pvt Ltd.,
New Delhi., 2011.
GE7152 ENGINEERING GRAPHICS L T P C

3 2 0 4
OBJECTIVES
To develop in students, graphic skills for communication of concepts, ideas and design of
engineering products and expose them to existing national standards related to technical
drawings.
CONCEPTS AND CONVENTIONS (NOT FOR EXAMINATION) 1

Importance of graphics in engineering applications Use of drafting instruments BIS
conventions and specifications Size, layout and folding of drawing sheets Lettering and
dimensioning.
UNIT I PLANE CURVES AND FREE HANDSKETCHING 14

Basic Geometrical constructions, Curves used in engineering practices-Conics
Construction of ellipse, parabola and hyperbola by eccentricity method Construction of
cycloid construction of involutes of square and circle Drawing of tangents and normal to
the above curves. Visualization concepts and Free Hand sketching: Visualization principles
Representation of Three Dimensional objects Layout of views- Free hand sketching of
multiple views from pictorial views of objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

Orthographic projection- principles-Principal planes-First angle projection-Projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes-
Determination of true lengths and true inclinations by rotating line method and trapezoidal
method and traces Projection of planes (polygonal and circular surfaces) inclined to both the
principal planes by rotating object method.
UNIT III PROJECTION OF SOLIDS 14

Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when
the axis is inclined to both the principal planes by rotating object method and auxiliary plane
method.
19
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF 14
SURFACES
Sectioning of solids in simple vertical position when the cutting plane is inclined to the one of
the principal planes and perpendicular to the other obtaining true shape of section.
Development of lateral surfaces of simple and sectioned solids Prisms, pyramids cylinders
and cones. Development of lateral surfaces of solids with cut-outs and holes.
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 15
Principles of isometric projection isometric scale Isometric projections of simple solids and
truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in
simple vertical positions and miscellaneous problems.
Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method
and vanishing point method.
COMPUTER AIDED DRAFTING (DEMONSTRATION ONLY) 3
Introduction to drafting packages and demonstration of their use.
L=45+T=30, TOTAL: 75 PERIODS
OUTCOMES:
On Completion of the course the student will be able to
Perform free hand sketching of basic geometrical shapes and multiple views of
objects.
Draw orthographic projections of lines, planes and solids
Obtain development of surfaces.
Prepare isometric and perspective views of simple solids.
TEXT BOOK:
1. N.D.Bhatt and V.M.Panchal, Engineering Drawing, Charotar Publishing House, 50th
Edition, 2010.
REFERENCES:
1. K.R.Gopalakrishna., Engineering Drawing (Vol I&II combined) SubhasStores,
Bangalore, 2007
2. Luzzader, Warren.J., and Duff,John M.,, Fundamentals of Engineering Drawingwith an
introduction to Interactive Computer Graphics for Design and Production,Eastern
Economy Edition, Prentice Hall of India Pvt Ltd, New Delhi, 2005
3. M.B.Shah and B.C.Rana, Engineering Drawing, Pearson, 2nd Edition, 2009
4. K.Venugopal and V.Prabhu Raja, Engineering Graphics, New Age International
(P)Limited ,2008.
5. K. V.Natarajan, A text book of Engineering Graphics, 28th Edition, Dhanalakshmi
Publishers, Chennai, 2015.
6. BasantAgarwal and Agarwal C.M., Engineering Drawing, Tata McGraw Hill Publishing
Company Limited, New Delhi, 2008.
7. N.S Parthasarathy and Vela Murali, Engineering Drawing, Oxford University Press,
2015
Publication of Bureau of Indian Standards:
1. IS 10711 2001: Technical products Documentation Size and lay out ofdrawing
sheets
2. IS 9609 (Parts 0 & 1) 2001: Technical products Documentation Lettering.
3. IS 10714 (Part 20) 2001 & SP 46 2003: Lines for technical drawings.
4. IS 11669 1986 & SP 46 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) 2001: Technical drawings Projection Methods.
Special points applicable to University Examinations on Engineering Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The students will be
permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day.
20
BS7161 BASIC SCIENCES LABORATORY L T PC
(Common to all branches of B.E. / B.Tech Programmes) 0 0 4 2
PHYSICS LABORATORY: (Any Seven Experiments)
OBJECTIVE:
To introduce different experiments to test basic understanding of physics concepts applied in
optics, thermal physics, properties of matter and liquids.
1. Torsional pendulum - Determination of rigidity modulus of wire and moment of inertia of disc
2. Non-uniform bending - Determination of youngs modulus
3. Uniform bending Determination of youngs modulus
4. Lees disc Determination of thermal conductivity of a bad conductor
5. Potentiometer-Determination of thermo e.m.f of a thermocouple
6. Laser- Determination of the wave length of the laser using grating
7. Air wedge - Determination of thickness of a thin sheet/wire
8. a) Optical fibre -Determination of Numerical Aperture and acceptance angle
b) Compact disc- Determination of width of the groove using laser.
9. Acoustic grating- Determination of velocity of ultrasonic waves in liquids.
10. Ultrasonic interferometer determination of the velocity of sound and compressibility of
liquids
11. Post office box -Determination of Band gap of a semiconductor.
12. Spectrometer- Determination of wavelength using gating.
13. Viscosity of liquids - Determination of co-efficient of viscosity of a liquid by
Poiseuilles flow
OUTCOME:
The hands on exercises undergone by the students will help them to apply physics principles of
optics and thermal physics to evaluate engineering properties of materials.
CHEMISTRY LABORATORY:
(Minimum of 8 experiments to be conducted)

1. Estimation of HCl using Na2CO3 as primary standard and Determination of alkalinity in water
sample.
2. Determination of total, temporary & permanent hardness of water by EDTA method.
3. Determination of DO content of water sample by Winklers method.
4. Determination of chloride content of water sample by argentometric method.
5. Estimation of copper content of the given solution by Iodometry.
6. Determination of strength of given hydrochloric acid using pH meter.
7. Determination of strength of acids in a mixture of acids using conductivity meter.
8. Estimation of iron content of the given solution using potentiometer.
9. Estimation of iron content of the water sample using spectrophotometer (1, 10-
Phenanthroline / thiocyanate method).
10. Estimation of sodium and potassium present in water using flame photometer.
11. Determination of molecular weight of poly vinyl alcohol using Ostwald viscometer.
12. Pseudo first order kinetics-ester hydrolysis.
13. Corrosion experiment-weight loss method.
14. Determination of CMC.
15. Phase change in a solid.
TOTAL: 60 PERIODS
TEXT BOOKS
1. Vogels Textbook of Quantitative Chemical Analysis (8TH edition, 2014)
2. Laboratory Manual- Department of Chemistry, CEGC, Anna University (2014).
21
GE7162 ENGINEERING PRACTICES LABORATORY L T P C
(Common to all Branches of B.E. / B.Tech. Programmes) 0 0 4 2
OBJECTIVES
To provide exposure to the students with hands-on experience on various Basic
Engineering Practices in Civil, Mechanical, Electrical and Electronics Engineering.
GROUP A (CIVIL & ELECTRICAL)

1. CIVIL ENGINEERING PRACTICES 15
PLUMBING
Basic pipe connections involving the fittings like valves, taps, coupling, unions, reducers,
elbows and other components used in household fittings. Preparation of plumbing line
sketches.
Laying pipe connection to the suction side of a pump.
Laying pipe connection to the delivery side of a pump.
Practice in connecting pipes of different materials: Metal, plastic and flexible pipes used in
household appliances.
WOOD WORK
Sawing, planing and making joints like T-Joint, Mortise and Tenon joint and Dovetail
joint.
STUDY
Study of joints in door panels and wooden furniture
Study of common industrial trusses using models.
2. ELECTRICAL ENGINEERING PRACTICES 15

Basic household wiring using Switches, Fuse, Indicator and Lamp etc.,
Stair case light wiring
Tube light wiring
Preparation of wiring diagrams for a given situation.
Study of Iron-Box, Fan Regulator and Emergency Lamp
GROUP B (MECHANICAL AND ELECTRONICS) 15

3. MECHANICAL ENGINEERING PRACTICES
WELDING
Arc welding of Butt Joints, Lap Joints, and Tee Joints
Gas welding Practice.
Basic Machining - Simple turning, drilling and tapping operations..
Study and assembling of the following:
a. Centrifugal pump
b. Mixie
c. Air Conditioner.
DEMONSTRATION ON FOUNDRY OPERATIONS.
4. ELECTRONIC ENGINEERING PRACTICES 15

Soldering simple electronic circuits and checking continuity.
Assembling electronic components on a small PCB and Testing.
Study of Telephone, FM radio and Low Voltage Power supplies.
TOTAL: 60 PERIODS
OUTCOMES
Ability to fabricate carpentry components and to lay pipe connections including plumbing
works.
Ability to use welding equipments to join the structures
Ability to do wiring for electrical connections and to fabricate electronics circuits.
22
HS7251 TECHNICAL ENGLISH L T P C
4 0 0 4
OBJECTIVES
To enable students acquire proficiency in technical communication.
To enhance their reading and writing skills in a technical context.
To teach various language learning strategies needed in aprofessional environment.
CONTENTS
UNIT I ANALYTICAL READING 12

Listening- Listening to informal and formal conversations; Speaking Conversation
Skills(opening, turn taking, closing )-explaining how something works-describing technical
functions and applications;Reading Analytical reading, Deductive and inductive reasoning;
Writing- vision statementstructuring paragraphs.
UNIT II SUMMARISING 12
Listening- Listening to lectures/ talks on Science & Technology;Speaking Summarizing/ Oral
Reporting, Reading Reading Scientific and Technical articles; Writing- Extended definition Lab
Reports Summary writing.
UNIT III DESCRIBING VISUAL MATERIAL 12

Listening- Listening to a panel discussion; Speaking Speaking at formal situations; Reading
Reading journal articles - Speed reading;Writing-data commentary-describing visual material-
writing problem-process- solution-the structure of problem-solution texts- writing critiques
UNIT IV WRITING/ E-MAILING THE JOB APPLICATION 12

Listening- Listening to/ Viewing model interviews; Speaking Speaking at different types of
interviews Role play practice ( mock interview); Reading Reading job advertisements and
profile of the company concerned;Writing- job application cover letter Rsum preparation.
UNIT V REPORT WRITING 12

Listening- Viewing a model group discussion;Speaking Participating in a discussion -
Presentation;Reading Case study - analyse -evaluate arrive at a solution;Writing
Recommendations- Types of reports (feasibility report)- designing and reporting surveys- Report
format.- writing discursive essays.
TEACHING METHODS:
Practice writing
Conduct model and mock interview and group discussion.
Use of audio visual aids to facilitate understanding of various forms of technical communication.
Interactive sessions.
EVALUATION PATTERN:
Internals 50%
End Semester 50%
TOTAL:60 PERIODS
OUTCOMES
Students will learn the structure and organization of various forms of technical
communication.
Students will be able to listen and respond to technical content.
Students will be able to use different forms of communication in their respective fields.
TEXTBOOK:
1. Craig,Thaine. Cambridge Academic English: An integrated skills course for
EAP(Students Book)Level: Intermediate Cambridge University Press, New Delhi: 2012
23
REFERENCES:
1. Laws, Anne. Presentations. Hyderabad: Orient Blackswan, 2011.
2. Ibbotson, Mark. Cambridge English for Engineering. Cambridge University Press,
Cambridge,New Delhi: 2008
3. Naterop, Jean B. and Rod Revell. Telephoning in English. Cambridge: Cambridge
University Press, 2004.
4. Rutherford, Andrea J. Basic Communication Skills for Technology. New Delhi: Pearson
Education, 2001.
5. Bailey, Stephen. Academic Writing A practical Guide for Students. Routledge, London:
2004
6. Hewings, Martin. Cambridge Academic English: An integrated skills course for
EAP(Students Book)Level: Intermediate Cambridge University Press, New Delhi: 2012.
MA7251 MATHEMATICS - II L T P C
(Common to all branches of B.E. / B.Tech. Programmes 4 0 0 4
in II Semester)
OBJECTIVES:
To develop the use of matrix algebra techniques that is needed by engineers for
practical applications.
To acquaint the student with the concepts of vector calculus, needed for problems in
all engineering disciplines.
To develop an understanding of the standard techniques of complex variable theory
so as to enable the student to apply them with confidence, in application areas such as
heat conduction, elasticity, fluid dynamics and flow of the electric current.
To make the student appreciate the purpose of using transforms to create a new
domain in which it is easier to handle the problem that is being investigated.
UNIT I MATRICES 12
Eigenvalues and Eigenvectors of a real matrix Characteristic equation Properties of
eigenvalues and eigenvectors Cayley-Hamilton theorem Diagonalization of matrices
Reduction of a quadratic form to canonical form by orthogonal transformation Nature of
quadratic forms.
UNIT II VECTOR CALCULUS 12
Gradient and directional derivative Divergence and Curl Irrotational and Solenoidal
vector fields Line integral over a plane curve Surface integral - Area of a curved surface -
Volume integral - Greens, Gauss divergence and Stokes theorems Verification and
application in evaluating line, surface and volume integrals.
UNIT III ANALYTIC FUNCTION 12
Analytic functions Necessary and sufficient conditions for analyticity - Properties
Harmonic conjugates Construction of analytic function - Conformal mapping Mapping by
1 2
functions w z c, az, , z - Bilinear transformation.
z
UNIT IV COMPLEX INTEGRATION 12

Line integral - Cauchys integral theorem Cauchys integral formula Taylors and
Laurents series Singularities Residues Residue theorem Application of residue
theorem for evaluation of real integrals Use of circular contour and semicircular contour
with no pole on real axis.
24
UNIT V LAPLACE TRANSFORMS 12
Existence conditions Transforms of elementary functions Transform of unit step function
and unit impulse function Basic properties Shifting theorems -Transforms of derivatives
and integrals Initial and final value theorems Inverse transforms Convolution theorem
Transform of periodic functions Application to solution of linear ordinary differential
equations with constant coefficients.
TOTAL: 60 PERIODS
OUTCOMES:
Upon successful completion of the course, students should be able to:
Evaluate real and complex integrals using the Cauchy integral formula and the
residue theorem
Appreciate how complex methods can be used to prove some important theoretical
results.
Evaluate line, surface and volume integrals in simple coordinate systems
Calculate grad, div and curl in Cartesian and other simple coordinate systems, and
establish identities connecting these quantities
Use Gauss, Stokes and Greens theorems to simplify calculations of integrals and
prove simple results.
TEXT BOOKS:
1. Erwin Kreyszig, "Advanced Engineering Mathematics", John Wiley and Sons, 9th Edition,
New Delhi, 2014.
2. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers, New Delhi, 43rd
Edition, 2014.
REFERENCES:
1. Ramana, B.V. Higher Engineering Mathematics, Tata McGraw Hill, New Delhi, 2010.
2. Glyn James, Advanced Modern Engineering Mathematics, Pearson Education, New
Delhi, 2007.
3. Jain R.K. and Iyengar S.R.K., Advanced Engineering Mathematics, Narosa
Publications, New Delhi, 3rd Edition, 2007.
4. Bali N., Goyal M. and Watkins C., Advanced Engineering Mathematics, Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
5. Peter V. ONeil , Advanced Engineering Mathematics, Cengage Learning India Pvt.,
Ltd, New Delhi, 2007.
GE7151 COMPUTING TECHNIQUES L T P C

(Common to all branches of Engineering and 3 0 0 3
Technology)
OBJECTIVES
To learn programming using a structured programming language.
To provide C programming exposure.
To introduce foundational concepts of computer programming to students of different
branches of Engineering and Technology.
UNIT I INTRODUCTION 9
Introduction to Computers Computer Software Computer Networks and Internet - Need for
logical thinking Problem formulation and development of simple programs - Pseudo code -
Flow Chart and Algorithms.
UNIT II C PROGRAMMING BASICS 9

Introduction to C programming Fundamentals Structure of a C program Compilation and
linking processes - Constants, Variables Data Types Expressions - Operators Decision
Making and Branching Looping statements Solving Simple Scientific and Statistical
Problems.
25
UNIT III ARRAYS AND STRINGS 9
Arrays Initialization Declaration One dimensional and two dimensional arrays - Strings-
String operations String Arrays - simple programs- sorting- searching matrix operations.
UNIT IV POINTERS 9
Macros - Storage classes Basic concepts of Pointers Pointer arithmetic - Example Problems
- Basic file operations
UNIT V FUNCTIONS AND USER DEFINED DATA TYPES 9

Function definition of function Declaration of function Pass by value Pass by reference
Recursion Enumerators Structures - Unions
TOTAL :45 PERIODS
OUTCOMES
At the end of the course, the student should be able to:
Write C program for simple applications
Formulate algorithm for simple problems
Analyze different data types and arrays
Perform simple search and sort.
Use programming language to solve problems.
TEXT BOOKS:
1. Pradip Dey, Manas Ghosh, Computer Fundamentals and Programming in C, Second
Edition, Oxford University Press, 2013
2. Ashok N. Kamthane, Computer programming, Pearson Education, 2007.
3. Yashavant P. Kanetkar. Let Us C, BPB Publications, 2011.
REFERENCES:
1. Kernighan,B.W and Ritchie,D.M, The C Programming language, Second Edition,
Pearson Education, 2006
2. Byron S Gottfried, Programming with C, Schaums Outlines, Second Edition, Tata
McGraw-Hill, 2006.
3. R.G. Dromey, How to Solve it by Computer, Pearson Education, Fourth Reprint, 2007
GE7153 ENGINEERING MECHANICS L T P C

4 0 0 4
OBJECTIVE :
The objective of this course is to inculcate in the student the ability to analyze any
problem in a simple and logical manner and to predict the physical phenomena and
thus lay the foundation for engineering applications.
UNIT I STATICS OF PARTICLES 12

Fundamental Concepts and Principles, Systems of Units, Method of Problem Solutions,
Statics of Particles -Forces in a Plane, Resultant of Forces, Resolution of a Force into
Components, Rectangular Components of a Force, Unit Vectors.
Equilibrium of a Particle- Newtons First Law of Motion, Space and Free-Body Diagrams,
Forces in Space, Equilibrium of a Particle in Space.
UNIT II EQUILIBRIUM OF RIGID BODIES 12

Principle of Transmissibility, Equivalent Forces, Vector Product of Two Vectors, Moment of a
Force about a Point ,Varignons Theorem, Rectangular Components of the Moment of a
Force, Scalar Product of Two Vectors, Mixed Triple Product of Three Vectors, Moment of a
Force about an Axis, Couple - Moment of a Couple, Equivalent Couples, Addition of Couples,
Resolution of a Given Force into a Force -Couple system, Further Reduction of a System of
Forces, Equilibrium in Two and Three Dimensions - Reactions at Supports and Connections.
26
UNIT III DISTRIBUTED FORCES 16
Centroids of lines and areas symmetrical and unsymmetrical shapes, Determination of
Centroids by Integration , Theorems of Pappus-Guldinus, Distributed Loads on Beams,
Center of Gravity of a Three-Dimensional Body, Centroid of a Volume, Composite Bodies ,
Determination of Centroids of Volumes by Integration.
Moments of Inertia of Areas and Mass - Determination of the Moment of Inertia of an Area by
Integration , Polar Moment of Inertia , Radius of Gyration of an Area , Parallel-Axis Theorem ,
Moments of Inertia of Composite Areas, Moments of Inertia of a Mass - Moments of Inertia
of Thin Plates , Determination of the Moment of Inertia of a Three-Dimensional Body by
Integration.
UNIT IV FRICTION 8
The Laws of Dry Friction. Coefficients of Friction, Angles of Friction, Wedges, Wheel Friction.
Rolling Resistance , Ladder friction.
UNIT V DYNAMICS OF PARTICLES 12

Kinematics - Rectilinear Motion and Curvilinear Motion of Particles.
Kinetics- Newtons Second Law of Motion -Equations of Motions , Dynamic Equilibrium,
Energy and Momentum Methods - Work of a Force , Kinetic Energy of a Particle, Principle of
Work and Energy, Principle of Impulse and Momentum, Impact, Method of Virtual Work -
Work of a Force, Potential Energy, Potential Energy and Equilibrium.
L 45 + T 15 TOTAL: 60 PERIODS
OUTCOME:
Upon completion of this course, students will be able to construct meaningful
mathematical models of physical problems and solve them.
TEXT BOOK
1. Beer,F.P and Johnson Jr. E.R, Vector Mechanics for Engineers, McGraw-Hill Education
(India) Pvt. Ltd. 10th Edition, 2013.
REFERENCES
1. Hibbeller, R.C., Engineering Mechanics: Statics, and Engineering Mechanics:
Dynamics, 13th edition, Prentice Hall, 2013.
2. J.L. Meriam & L.G. Karige, Engineering Mechanics: Statics (Volume I) and Engineering
Mechanics: Dynamics, 7th edition, Wiley student edition, 2013.
3. P. Boresi & J. Schmidt, Engineering Mechanics: Statics and Dynamics, 1/e, Cengage
learning, 2008.
4. Irving H. Shames, G. Krishna Mohana Rao, Engineering Mechanics - Statics and
Dynamics, Fourth Edition PHI / Pearson Education Asia Pvt. Ltd., 2006.
5. Vela Murali, Engineering Mechanics, Oxford University Press (2010)
ME7252 MANUFACTURING TECHNOLOGY I L T P C

3 0 0 3
OBJECTIVE:
To introduce the students to the concepts of basic manufacturing processes and
fabrication techniques, such as metal casting, metal joining, metal forming and
manufacture of plastic components.
27
UNIT I METAL CASTING PROCESSES 9
Sand Casting Sand Mould Type of patterns - Pattern Materials Pattern allowances
Moulding sand Properties and testing Cores Types and applications Moulding machines
Types and applications Melting furnaces Principle of special casting processes- Shell,
investment Ceramic mould Pressure die casting Centrifugal Casting - CO casting -
Defects in Sand casting process Stir casting - Defects in Sand casting.
UNIT II METAL JOINING PROCESSES 9

Fusion welding processes Type of Gas welding Flame characteristics Filler and Flux
materials Arc welding, Electrodes, Coating and specifications Principles and types of
Resistance welding Gas metal arc welding Submerged arc welding Electro slag welding
Gas Tungsten arc welding Principle and application of special welding processes
Plasma arc welding Thermit Welding Electron beam welding Friction welding Diffusion
welding Weld defects Brazing and soldering methods and process capabilities
Adhesive bonding, Types and application
UNIT III BULK DEFORMATION PROCESSES 9

Hot working and cold working of metals Forging processes Open, impression and closed
die forging Characteristics of the processes Typical forging operations rolling of metals
Types of Rolling Flat strip rolling shape rolling operations Defects in rolled parts
Principle of rod and wire drawing Tube drawing Principles of Extrusion Types Hot and
Cold extrusion.
UNIT IV SHEET METAL PROCESSES 9

Sheet metal characteristics Typical shearing, bending and drawing operations Stretch
forming operations Formability of sheet metal Test methods special forming processes -
Working principle and applications Hydro forming Rubber pad forming Metal spinning
Introduction of Explosive forming, magnetic pulse forming, peen forming, Super plastic
forming Micro forming.
UNIT V MANUFACTURE OF PLASTIC COMPONENTS 9

Types and characteristics of plastics Moulding of thermoplastics working principles and
typical applications injection moulding Plunger and screw machines Compression
moulding, Transfer Moulding Typical industrial applications introduction to blow moulding
Rotational moulding Film blowing Extrusion Thermoforming Bonding of
Thermoplastics.
TOTAL: 45 PERIODS
OUTCOMES:
Upon completion of this course, the students can able to apply the different
manufacturing process and use this in industry for component production.
TEXT BOOKS:
1. Kalpakjian. S, Manufacturing Engineering and Technology, Pearson Education India
Edition, 2006
2. S. Gowri P. Hariharan, A.Suresh Babu, Manufacturing Technology I, Pearson
Education, 2008
REFERENCES:
1. Roy. A. Lindberg, Processes and materials of manufacture, PHI / Pearson education,
2006.
2. Hajra Chouldhary S.K and Hajra Choudhury. AK., Elements of workshop Technology,
volume I and II, Media promoters and Publishers Private Limited, Mumbai, 1997.
3. Paul Degarma E, Black J.T and Ronald A. Kosher, Eligth Edition, Materials and
Processes, in Manufacturing prentice Hall of India, 1997.
4. Sharma, P.C., A Text book of production Technology, S.Chand and Co. Ltd., 2004. 5.
P.N. Rao, Manufacturing Technology Foundry, Forming and Welding, TMH-2003; 2 nd
Edition, 2003.
28
ME7261 MANUFACTURING TECHNOLOGY LAB I L T P C
0 0 4 2
OBJECTIVE
To give the students hands on experience in the basic manufacturing processes like
metal casting, metal joining, metal forming and manufacture of plastic components.
LIST OF EXPERIMENTS
1. Fabrication of simple structural shapes using Gas Metal Arc Welding
2. Joining of plates and pipes using Submerged arc welding
3. Friction stir welding of aluminium plates
4. Preparation of green sand moulds
5. Casting of aluminium components
6. Die casting of aluminium components
7. Stir casting of aluminium components
8. Open and closed die forging of light metal components
9. Reducing the thickness of the plates using two-high rolling process
10. Reducing the diameter of using Wire drawing
11. Extrusion of metal components of simple shapes
12. Manufacturing of simple sheet metal components using shearing and bending operations.
13. Drawing of cup shaped products
14. Manufacturing of sheet metal components using metal spinning on a lathe
15. Forming of simple sheet metal parts by Water hammer forming process
16. Extrusion of plastic components
TOTAL: 60 PERIODS
OUTCOME
Upon completion of this course the students can demonstrate the capability to fabricate
metal / plastic components using basic manufacturing processes.
GE7161 COMPUTER PRACTICES LABORATORY L T P C

0 0 4 2
OBJECTIVES
To understand the basic programming constructs and articulate how they are used to
develop a program with a desired runtime execution flow.
To articulate where computer programs fit in the provision of computer-based solutions
to real world problems.
To learn to use user defined data structures.
LIST OF EXPERIMENTS
1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions
9. Program using Recursive Function
10. Program using structures and unions.
TOTAL: 60 PERIODS
29
OUTCOMES
At the end of the course, the student should be able to:
Write and compile programs using C programs.
Write program with the concept of Structured Programming
Identify suitable data structure for solving a problem
Demonstrate the use of conditional statement.
LABORATORY REQUIREMENTS FOR BATCH OF 30 STUDENTS

30 Systems with C compiler
CE7251 STRENGTH OF MATERIALS L T P C

3 0 0 3
OBJECTIVE:
To understand the stresses developed in bars, compounds bars, beams, shafts, cylinders
and spheres.
UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS 9

Rigid bodies and deformable solids Tension, Compression and Shear Stresses
Deformation of simple and compound bars Thermal stresses Elastic constants
Volumertric strains Stresses on inclined planes principal stresses and principal planes
Mohrs circle of stress.
UNIT II TRANSVERSE LOADING ON BEAMS AND STRESSES IN BEAM 9

Beams types transverse loading on beams Shear force and bending moment in beams
Cantilevers Simply supported beams and over hanging beams. Theory of simple bending
bending stress distribution Load carrying capacity Proportioning of sections Flitched
beams Shear stress distribution.
UNIT III TORSION 9

Torsion formulation stresses and deformation in circular and hollows shafts Stepped shafts
Deflection in shafts fixed at the both ends Stresses in helical springs Deflection of helical
springs, carriage springs.
UNIT IV DEFLECTION OF BEAMS 9

Double Integration method Macaulays method Area moment Theorems for computation
of slopes and deflections in beams - Conjugate beam and strain energy Maxwells reciprocal
theorems.
9
UNIT V THIN CYLINDERS, SPHERES AND THICk CYLINDERS
Stresses in thin cylindrical shell due to internal pressure circumferential and longitudinal stresses
and deformation in thin cylinders spherical shells subjected to internal pressure Deformation
in spherical shells Lames theory Application of theories of failure.
TOTAL: 45 PERIODS
OUTCOMES:
Upon completion of this course, the students can able to apply mathematical knowledge to
calculate the deformation behavior of simple structures.
Critically analyse problem and solve the problems related to mechanical elements and
analyse the deformation behavior for different types of loads.
TEXT BOOkS:
1. Bansal, R.K., Strength of Materials, Laxmi Publications (P) Ltd., 2007
2. Jindal U.C., Strength of Materials, Asian Books Pvt. Ltd., New Delhi, 2007
30
REFERENCES:
1. Egor. P.Popov Engineering Mechanics of Solids Prentice Hall of India, New Delhi,
2001
2. Subramanian R., Strength of Materials, oxford University Press, Oxford Higher Education
Series, 2007.
3. Hibbeler, R.C., Mechanics of Materials, Pearson Education, Low Price Edition, 2007
4. Ferdinand P. Been, Russell Johnson, J.r. and John J. Dewole Mechanics of Materials, Tata
Mcgraw Hill publishing co. Ltd., New Delhi.
CE 7352 FLUID MECHANICS AND MACHINERY L T P C

3 0 0 3
OBJECTIVES:
To study the applications of the conservation laws to flow through pipes and hydraulic
machines.
To understand the importance of dimensional analysis.
To understand the importance of various types of flow in pumps and turbines.
UNIT I FLUID PROPERTIES AND FLOW CHARACTERISTICS 9

Units and dimensions- Properties of fluids- mass density, specific weight, specific volume, specific
gravity, viscosity, compressibility, vapor pressure, capillarity and surface tension. Flow
characteristics concept of control volume - application of control volume to continuity equation,
energy equation and momentum equation.
UNIT II FLOW THROUGH CIRCULAR CONDUITS 9

Hydraulic and energy gradient - Laminar flow through circular conduits and circular annuli-
Boundary layer concepts types of boundary layer thickness Darcy Weisbach equation
friction factor- Moody diagram- commercial pipes- minor losses Flow through pipes in series and
parallel.
UNIT III DIMENSIONAL ANALYSIS 9

Need for dimensional analysis methods of dimensional analysis Similitude types of similitude
- Dimensionless parameters- application of dimensionless parameters Model analysis.
UNIT IV PUMPS 9
Impact of jets - Eulers equation - Theory of rotodynamic machines various efficiencies
velocity components at entry and exit of the rotor- velocity triangles - Centrifugal pumps
working principle - work done by the impeller - performance curves - Reciprocating pump-
working principle indicator diagram work saved by fitting air vessels Rotary pumps
classification comparison of working principle with other pumps advantages.
UNIT V TURBINES 9
Classification of turbines heads and efficiencies velocity triangles axial, radial and mixed flow
turbines Pelton wheel and Francis turbine - working principles - work done by water on the
runner draft tube - specific speed - unit quantities performance curves for turbines governing
of turbines.
TOTAL : 45 PERIODS
OUTCOMES:
Upon completion of this course, the students will be able to:
Apply mathematical knowledge to predict the properties and characteristics of a fluid.
Critically analyse the performance of pumps and turbines.
31
TEXT BOOKS:
1. Streeter, V. L. and Wylie E. B., Fluid Mechanics, McGraw Hill Publishing Co.(2010)
2. Kumar K. L., Engineering Fluid Mechanics, Eurasia Publishing House(p) Ltd. New Delhi
(2004).
3. Modi P.N. and Seth, S.M. Hydraulics and Fluid Mechanics, Standard Book House
(2002), New Delhi
REFERENCES:
1. Robert .Fox, Alan T. McDonald, Philip J.Pritchard, Fluid Mechanics and Machinery, ISBN
978-0-470-54755-7, 2011..
EC 7354 ELECTRONICS ENGINEERING L T P C

3 0 0 3
OBJECTIVE:
To provide knowledge in the basic concepts of Electronics Engineering including
semiconductors, transistors, electronic devices, signal generators, transducers and digital
electronics.
UNIT I SEMICONDUCTORS AND RECTIFIERS 9

P-N junction, VI Characteristics of PN junction diode, Zener diode, Zener diode Characteristics,
Zener diode as a regulator, BJT and N-MOSFET working and V-I characteristics.
UNIT II AMPLIFIERS AND OSCILLATORS 9
BJT CE amplifier with and without feedback and frequency response, CS MOSFET amplifier and
its frequency response, Current series feedback amplifier. Positive feedback, Sinusoidal
oscillators Wein bridge oscillators, Hartley, Colpitts, and Crystal oscillator.
UNIT III LINEAR INTEGRATED CIRCUITS 9
Operational amplifier Inverting and Non-inverting amplifiers, Adder, integrator and differentiator,
Instrumentation amplifier, Digital to Analog converters - R-2R and weighted resistor types, Analog
to Digital converters - Successive approximation and Flash types, IC 555 based Astable and
Monostable Multivibrators,
UNIT IV DIGITAL ELECTRONICS 9
Boolean algebra, Logic Gates, Half and Full adders, Decoder, Encoder, Multiplexer, Demultiplexer,
Flip flops, Counters and Registers.
UNIT V TRANSDUCERS AND DISPLAY DEVICES 9
Thermistors, Semiconductor strain gauges, LVDT, Tachometer, Ultrasonic and Thermal flow
meter, pressure force and weight measurement, Seven segment display, LED and LCD
TOTAL : 45 PERIODS
OUTCOME:
Identify and apply electronics components to design circuits.
TEXT BOOK:
1. Malvino, Electronic Principles, McGraw Book Co., 1993.
REFERENCES:
1. Grob. B and Schultz. M.E. Basic Electronics, Tata Mcgraw Hill, 2003.
2. Thomas L. Floyd, Electronics Devices, Pearson Education, 2002.
3. Thomas L. Floyd, Digital Fundamentals, Pearson Education, 2003.
4. Millman, Halkias Jacob, Jit Christos and Satyabrata, Electronic devices and Circuits, Tata
McGraw Hill, 2 nd Edition.
5. Transducers in Mechanical and Electronic Design by Trietley
32
EE 7251 BASIC ELECTRICAL ENGINEERING AND L T P C
MEASUREMENTS 3 0 0 3
OBJECTIVES:
To impart knowledge on
Electric circuit laws
Principle of Electrical Machines
Various measuring instruments
UNIT I ELECTRICAL CIRCUITS 9

Ohms Law Kirchhoffs Law-Mesh analysis Superposition and Thevenins theorem -
Introduction to AC circuits waveforms, RMS and average value Power and power factor-
Three phase balanced circuits-Three phase Power measurement.
UNIT II ELECTRICAL MACHINES 9

Principle of operation DC machines- Characteristics of DC motor - Single phase transformers,
three-phase and single-phase induction motors Speed Control.
UNIT III SPECIAL ELECTRICAL COMPONENTS 9

Synchronous machine Brushless DC Motor - Stepper motor Switched reluctance motor-
Electromechanical Relays.
UNIT IV ELECTRICAL MEASUREMENTS 9

Classification of instruments moving coil and moving iron meters Induction type, dynamometer
type wattmeters Energy meter Megger Instrument transformers (CT & PT) Wheatstones
bridge for measurement of unknown resistance ,Maxwells bridge for unknown inductance and
Schering Bridge for unknown capacitance Instrumentation Amplifiers.
UNIT V MECHANICAL MEASUREMENTS 9

Classification of transducers, strain, RTD, thermocouples, Piezo-electric transducer, LVDT,
Turbine and electromagnetic flow meters, level transducers ultrasonic and fiber optic transducers,
type of sensors, elastic sensors, viscosity, moisture and pH sensors, Digital transducers, vibrating
wire instruments like load cells, stress meter, etc.
TOTAL : 45 PERIODS
OUTCOME:
Explain different types of electrical machines and their performance.
TEXT BOOKS:
1. Del Toro Electrical Engineering Fundamentals Pearson Education, New Delhi, 2007.
2. Alan S. Moris, Principles of Measurements and Instruments, Prentice-Hall of India Pvt. Ltd.,
New Delhi, 1999.
3. T.Kenjo and S.Nagamori, Permanent magnet and Brushless DC motors, Clarendon 125 press,
London, 1988.
4. Sunil S.Rao, Switchgear and Protection, Khanna publishers, New Delhi, 2008.
REFERENCES:
1. Rajendra Prasad Fundamentals of Electrical engineering Prentice Hall of India, 2006.
2. Sanjeev Sharma Basics of Electrical Engineering S.K International Publishers, New Delhi
2007.
3. John Bird, Electrical Circuits theory and Technology, Elsevier, First India Edition, 2006.
4. Doebeling, E.O., Measurements Systems Application and Design, McGrawHill Publishing
Co, 1990.
5. D.P.Kothari and I.J.Nagrath, Electric machines, Tata Mc Graw hill publishing company, New
Delhi, Third Edition, 2004.
33
MA 7302 PARTIAL DIFFERENTIAL EQUATIONS L T P C
4 0 0 4
OBJECTIVES :
To introduce the effective mathematical tools for the solutions of partial differential
equations that model physical processes;
To introduce Fourier series analysis which is central to many applications in engineering
apart from its use in solving boundary value problems;
To demonstrate the utility of numerical techniques of partial differential equations in solving
engineering problems where analytical solutions are not readily available. The focus will be
on finite difference methods.
To solve PDEs in one or more "space" dimensions using finite difference methods and to
discuss the stability limits for these numerical schemes.
UNIT I PARTIAL DIFFERENTIAL EQUATIONS 12

Formation Solutions of first order equations Standard types and Equations reducible to
standard types Singular solutions Lagranges linear equation Integral surface passing
through a given curve Classification of partial differential equations - Solution of linear equations
of higher order with constant coefficients Linear non-homogeneous
partial differential equations.
UNIT II FOURIER SERIES 12

Dirichlets conditions General Fourier series Odd and even functions Half range Sine and
Cosine series Complex form of Fourier series Parsevals identity Harmonic Analysis.
UNIT III FOURIER SERIES SOLUTIONS OF PARTIAL DIFFERENTIAL 12

EQUATIONS
Method of separation of variables Solutions of one dimensional wave equation and one-
dimensional heat equation Steady state solution of two-dimensional heat equation Fourier
series solutions in Cartesian coordinates.
UNIT IV FINITE DIFFERENCE SOLUTION TO HEAT EQUATION 12

Numerical differentiation by finite differences: Second order differences for first and second
derivatives Solution of linear system of equations: Gauss elimination method, Thomas algorithm
Explicit and Crank-Nicholson schemes for one space dimensional heat equation Alternating
Direction and Implicit method (ADI Method) for two space heat equation.
UNIT V FINITE DIFFERENCE SOLUTION TO POTENTIAL AND WAVE 12

EQUATIONS
Iterative solution of linear system of equations: Gauss-Jacobi, Gauss-Seidel and SOR methods --
Finite difference techniques for the solution of two dimensional Laplaces and Poissons equations
on rectangular domain Leibmanns method Lax-Wendroff
scheme for first order hyperbolic equation - Explicit finite difference scheme for one space
dimensional wave equation.
TOTAL : 60 PERIODS
OUTCOMES:
Students acquire basic understanding of the most common partial differential equations,
and to learn some methods for solving them. The main goal of the course is that the
student, after finished studies, should be able to solve boundary value problems for
Laplace's equation, the heat equation, the wave equation.
TEXT BOOKS:
1. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers, New Delhi, 43rd Edition,
2014.
2. Jain M.K, Iyengar S.R.K and Jain R.K., Computational Methods for Partial Differential
Equations, New-Age International, Reprint , 2002.
34
REFERENCES:
1. Glyn James, Advanced Modern Engineering Mathematics, Pearson Education, 2007.
2. Peter V. ONeil, Advanced Engineering Mathematics, Cengage Learning, 2007.
3. Grewal,B.S. and Grewal,J.S., Numerical methods in Engineering and Science, Khanna
Publishers, New Delhi, 9th Edition, 2007.
4. G.D.Smith, Numerical Solutions of Partial Differential Equations, Oxford University Press, 3 rd
Edition,1987.
5. Gerald, C.F. and Wheatley, P.O., Applied Numerical Analysis, Pearson Education Asia, New
Delhi, 6th Edition, 2006.
ME 7301 ENGINEERING THERMODYNAMICS L T P C

4 0 0 4
OBJECTIVE:
To train the students on the basics and applications of energy in Mechanical Engineering
UNIT I BASIC CONCEPTS AND FIRST LAW 12
Basic concepts - continuum, Microscopic and Macroscopic approaches. Path and point functions.
Intensive and extensive properties, total and specific quantities. System, surrounding, boundary
and their types. Thermodynamic Equilibrium. State, path and process. Quasi-static, reversible and
irreversible processes. Heat and work transfer - definition and comparison, sign convention.
Displacement work, P-V diagram and other modes of work. Zeroth law concept of temperature
and thermal equilibrium. First law application to closed and open systems steady and unsteady
flow processes.
UNIT II SECOND LAW 12
Heat Reservoir - source and sink. Heat Engine, Refrigerator, Heat pump. Statements of second
law and its corollaries. Carnot cycle, Reversed Carnot cycle, Performance. Clausius inequality.
Concept of entropy, T-s diagram, Tds Equations - entropy change for a pure substance, ideal
gases undergoing different processes, principle of increase in entropy. Applications of II Law. High
and low grade energy. Availability and Irreversibility analysis for open and closed systems, I and II
law Efficiency.
UNIT III PURE SUBSTANCES AND STEAM POWER CYCLE 12
Steam - formation and its thermodynamic properties - p-v, p-T, T-v, T-s, h-s diagrams. PVT
surface. Determination of dryness fraction. Calculation of work done and heat transfer in non-flow
and flow processes using Steam Table and Mollier Chart. Ideal and actual Rankine cycles.
UNIT IV IDEAL AND REAL GASES THERMODYNAMIC RELATIONS 12
Properties of Ideal gas, real gas, and their comparison. Equations of state for ideal and real gases.
van der Waal's relation, Reduced properties, Compressibility factor, Principle of Corresponding
states. Generalised Compressibility Chart and its use. Maxwell relations, Tds Equations, heat
capacities relations, Energy equation, Joule-Thomson experiment, Phase Change Processes,
Clausius-Clapeyron equation. Simple Calculations.
UNIT V GAS MIXTURES AND PSYCHROMETRY 12
Mole and mass fractions Daltons and Amagats laws, properties of ideal gas mixtures.
Psychrometric properties Property calculations using Psychrometric chart and expressions.
Psychrometric processes adiabatic saturation, sensible heating and cooling, humidification,
dehumidification, evaporative cooling and adiabatic mixing.
TOTAL : 60 PERIODS
(Use of Steam tables, Mollier chart and Psychrometric chart permitted)
OUTCOMES:
Thermodynamic principles to Engineering Applications.
Apply mathematical fundamentals to study the properties of steam, gas and gas mixtures.
35
TEXT BOOKS:
1. Nag.P.K, Engineering Thermodynamics, 5th Edition, Tata McGraw Hill (2013), New Delhi
2. Natarajan .E, Engineering Thermodynamics: Fundamentals and Applications, 2nd Edition
(2014) Anuragam Publications, Chennai.
REFERENCES:
1. Y. Cengel and M. Boles, Thermodynamics - An Engineering Approach, Tata McGraw Hill,7th
Edition, 2011.
2. Chattopadhyay, P, Engineering Thermodynamics,2nd Ed. Oxford University Press, 2014.
3. Venkatesh. A, Basic Engineering Thermodynamics, Universities Press (India) Limited, 2007.
4. E. Rathakrishnan, Fundamentals of Engineering Thermodynamics, 2nd Edition, Prentice
Hall of India Pvt. Ltd, 2006.
5. Van Wylen and Sonntag, Classical Thermodynamics, Wiley Eastern, 1987.
6. Arora .C.P., Refrigeration and Air Conditioning, Tata McGraw Hill, 1994.
CE 7312 FLUID MECHANICS AND STRENGTH OF MATERIALS L T P C

LABORATORY 0 0 4 2
OBJECTIVES:
To study the mechanical properties of materials when subjected to different types of
loading.
To verify the principles studied in Fluid Mechanics theory by performing experiments in
lab.
UNIT I STRENGTH OF MATERIALS 30

LIST OF EXPERIMENTS
1. Tension test on mild steel rod
2. Torsion test on mild steel rod
3. Hardness test on metal beam (Rockwell and Brinell Hardness Tests)
4. Compression test on helical spring
5. Deflection test on carriage spring
UNIT II FLUID MECHANICS AND MACHINES LABORATORY 30

LIST OF EXPERIMENTS
A. FLOW MEASUREMENT
1. Flow through Venturimeter
B. PUMPS
2. Characteristics of Centrifugal pumps
3. Characteristics of Gear pump
4. Characteristics of Submersible pump
5. Characteristics of Reciprocating pump
C. TURBINES
6. Characteristics of Francis turbine
D. DETERMINATION OF METACENTRIC HEIGHT
7. Determination of Metacentric height
TOTAL:60 PERIODS
OUTCOMES:
Perform Tension, Torsion, Hardness, Compression, and Deformation test on Solid
materials.
Use the measurement equipments for flow measurement.
Perform test on different fluid machinery.
36
REFERENCES:
1. Strength of Materials Laboratory Manual, Anna University, Chennai 600 025, 2010
2. Hydraulic Laboratory Manual, Centre for Water Resources, Anna University, 2004.
3. Modi P.N. and Seth S.M., Hydraulics and Fluid Mechanics. Standard Book House.
New Delhi, 2000.
4. Subramanya, K.. Flow in open channels, Tata McGraw - Hill pub. Co., 1992.
5. Subramanya, K. Fluid mechanics, Tata McGraw- Hill pub. Co., New Delhi,1992.
EE7261 ELECTRICAL AND ELECTRONICS ENGINEERING L T PC

LABORATORY 0 0 4 2
OBJECTIVE:
To train the students in performing various tests on electrical drives, sensors and circuits.
LIST OF EXPERIMENTS:
1. Load test on separately excited DC shunt generator
2. Load test on DC shunt moor
3. Load test on S Transformer
4. Load test on Induction motor
5. Regulation of 3 Alternator
6. Study of CRO
7. Logic gates
8. Operational amplifiers
9. Time constant of RC circuit
10. Characteristics of LVDT
11. Calibration of Rotometer
12. RTD and Thermistor
13. Flapper Nozzle system
TOTAL: 60 PERIODS
OUTCOMES:
Ability to perform speed characteristic of different electrical machine
Ability to use of diodes, transistors for rectifiers
Ability to use of operational amplifiers
GE 7251 ENVIRONMENTAL SCIENCE AND ENGINEERING L T P C

3 0 0 3
OBJECTIVES:
To the study of nature and the facts about environment.
To find and implement scientific, technological, economic and political solutions to
environmental problems.
To study the interrelationship between living organism and environment.
To appreciate the importance of environment by assessing its impact on the human world;
envision the surrounding environment, its functions and its value.
To study the dynamic processes and understand the features of the earths interior and
surface.
To study the integrated themes and biodiversity, natural resources, pollution control and
waste management.
37
UNIT I ENVIRONMENT, ECOSYSTEMS AND BIODIVERSITY 14
Definition, scope and importance of environment need for public awareness - concept of an
ecosystem structure and function of an ecosystem producers, consumers and decomposers
energy flow in the ecosystem ecological succession food chains, food webs and ecological
pyramids Introduction, types, characteristic features, structure and function of the (a) forest
ecosystem (b) grassland ecosystem (c) desert ecosystem (d) aquatic ecosystems (ponds, streams,
lakes, rivers, oceans, estuaries) Introduction to biodiversity definition: genetic, species and
ecosystem diversity biogeographical classification of India value of biodiversity: consumptive
use, productive use, social, ethical, aesthetic and option values Biodiversity at global, national and
local levels India as a mega-diversity nation hot-spots of biodiversity threats to biodiversity:
habitat loss, poaching of wildlife, man-wildlife conflicts endangered and endemic species of India
conservation of biodiversity: In-situ and ex-situ conservation of biodiversity.
Field study of common plants, insects, birds
Field study of simple ecosystems pond, river, hill slopes, etc.
UNIT II ENVIRONMENTAL POLLUTION 8

Definition causes, effects and control measures of: (a) Air pollution (b) Water pollution (c)Soil
pollution (d) Marine pollution (e) Noise pollution (f) Thermal pollution (g) Nuclear hazards soil
waste management: causes, effects and control measures of municipal solid wastes role of an
individual in prevention of pollution pollution case studies disaster management: floods,
earthquake, cyclone and landslides.
Field study of local polluted site Urban / Rural / Industrial / Agricultural.
UNIT III NATURAL RESOURCES 10

Forest resources: Use and over-exploitation, deforestation, case studies- timber extraction,
mining, dams and their effects on forests and tribal people Water resources: Use and over-
utilization of surface and ground water, floods, drought, conflicts over water, dams-benefits and
problems Mineral resources: Use and exploitation, environmental effects of extracting and
using mineral resources, case studies Food resources: World food problems, changes caused
by agriculture and overgrazing, effects of modern agriculture, fertilizer-pesticide problems, water
logging, salinity, case studies Energy resources: Growing energy needs, renewable and non
renewable energy sources, use of alternate energy sources. case studies Land resources:
Land as a resource, land degradation, man induced landslides, soil erosion and desertification
role of an individual in conservation of natural resources Equitable use of resources for
sustainable lifestyles.
Field study of local area to document environmental assets river / forest / grassland / hill /
mountain.
UNIT IV SOCIAL ISSUES AND THE ENVIRONMENT 7

From unsustainable to sustainable development urban problems related to energy
water conservation, rain water harvesting, watershed management resettlement and
rehabilitation of people; its problems and concerns, case studies role of non-governmental
organization- environmental ethics: Issues and possible solutions climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust, case studies.
wasteland reclamation consumerism and waste products environment production act Air
(Prevention and Control of Pollution) act Water (Prevention and control of Pollution) act
Wildlife protection act Forest conservation act enforcement machinery involved in
environmental legislation- central and state pollution control boards- Public awareness.
UNIT V HUMAN POPULATION AND THE ENVIRONMENT 6

Population growth, variation among nations population explosion family welfare programme
environment and human health human rights value education HIV / AIDS women and
child welfare role of information technology in environment and human health Case studies.
TOTAL:45 PERIODS
OUTCOMES:
Environmental Pollution or problems cannot be solved by mere laws. Public participation is an
important aspect which serves the environmental Protection. One will obtain knowledge on the
38
following after completing the course.
Public awareness of environment at infant stage.
Ignorance and incomplete knowledge has lead to misconceptions.
Development and improvement in standard of living has lead to serious environmental
disasters.
TEXT BOOKS:
1. Gilbert M.Masters, Introduction to Environmental Engineering and Science, 2nd edition,
Pearson Education 2004.
2. Benny Joseph, Environmental Science and Engineering, Tata McGraw-Hill, New Delhi, 2006.
REFERENCES:
1. R.K. Trivedi, Handbook of Environmental Laws, Rules, Guidelines, Compliances
and Standards, Vol. I and II, Enviro Media.
2 . Cunningham, W.P. Cooper, T.H. Gorhani, Environmental Encyclopedia,Jaico
Publ., House, Mumbai, 2001.
3. Dharmendra S. Sengar, Environmental law, Prentice hall of India PVT LTD,New Delhi,
2007.
4. Rajagopalan, R, Environmental Studies-From Crisis to Cure, Oxford University Press
2005.
MA7354 NUMERICAL METHODS L T P C

4 0 0 4
OBJECTIVES:
To provide the mathematical foundations of numerical techniques for solving linear system,
Eigen value problems, interpolation, numerical differentiation and integration and the errors
associated with them;
To demonstrate the utility of numerical techniques of ordinary and partial differential
equations in solving engineering problems where analytical solutions are not readily
available.
UNIT I SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS 12

Solution of algebraic and transcendental equations - Fixed point iteration method Newton-
Raphson method- Solution of linear system of equations - Gauss elimination method Pivoting -
Gauss-Jordan methods Iterative methods of Gauss-Jacobi and Gauss-Seidel - Matrix Inversion
by Gauss-Jordan method Eigen values of a matrix by Power method and by Jacobis method.
UNIT II INTERPOLATION AND APPROXIMATION 12

Interpolation with unequal intervals - Lagrange interpolation Newtons divided difference
interpolation Cubic Splines - Interpolation with equal intervals - Newtons forward and backward
difference formulae Least square method - Linear curve fitting.
UNIT III NUMERICAL DIFFERENTATION AND INTEGRATION 12

Approximation of derivatives using interpolation polynomials - Numerical integration using
Trapezoidal, Simpsons 1/3 and Simpsons 3/8 rules Rombergs method - Two point and three
point Gaussian quadrature formulae Evaluation of double integrals by Trapezoidal and
Simpsons rules.
UNIT IV INITIAL VALUE PROBLEMS FOR ORDINARY DIFFERENTIAL 12

EQUATIONS
Single step-methods - Taylors series method - Eulers method - Modified Eulers method - Fourth
order Runge-Kutta method for solving first and second order equations - Multi-step methods -
39
Milnes and Adams-Bashforth predictor-corrector methods for solving first order equations.
UNIT V BOUNDARY VALUE PROBLEMS IN ORDINARY AND PARTIAL 12

DIFFERENTIAL EQUATIONS
Finite difference methods for solving two-point linear boundary value problems - Finite difference
techniques for the solution of two dimensional Laplaces and Poissons equations on rectangular
domain One dimensional heat-flow equation by explicit and implicit (Crank-Nicholson) methods -
One dimensional wave equation by explicit method.
TOTAL:60 PERIODS
OUTCOMES:
Demonstrate understanding of common numerical methods and how they are used to
obtain approximate solutions.
Apply numerical methods to obtain approximate solutions to mathematical problems.
Derive numerical methods for various mathematical operations and tasks, such as
interpolation, differentiation, integration, the solution of linear and nonlinear equations, and
the solution of differential equations.
Analyse and evaluate the accuracy of common numerical methods.
TEXT BOOKS:
1. Grewal, B.S. and Grewal,J.S., Numerical methods in Engineering and Science, Khanna
Publishers, New Delhi, 9th Edition, 2007.
2. Sankara Rao . K, " Numerical Methods for Scientists and Engineers" PHI, Learning Pvt Ltd.
New Delhi, 2007.
REFERENCES:
1. Brian Bradie, A Friendly Introduction to Numerical Analysis, Pearson Education Asia, New
Delhi, 1st Edition, 2007.
2. Gerald, C.F. and Wheatley, P.O., Applied Numerical Analysis, Pearson Education Asia, New
Delhi, 6th Edition, 2006.
3. Laurene V. Fausett, Applied Numerical Analysis using MATLAB, Pearson Education, New
Delhi, 1st print, 2nd Edition, 2009.
4. S. R. K. Iyengar, R. K. Jain, Mahinder Kumar Jain, "Numerical Methods for
5. Scientific and Engineering Computation", 6th Edition, New Age International Publishers, New
Delhi, 2012.
ME 7352 MANUFACTURING TECHNOLOGY II L T P C

3 0 0 3
OBJECTIVES:
To understand the concept and basic mechanics of metal cutting, working of standard
machine tools such as lathe, shaping and allied machines, milling, drilling and allied
machines, grinding and allied machines and broaching.
To understand the basic concepts of Computer Numerical Control (CNC) of machine tools
and CNC Programming.
UNIT I THEORY OF METAL CUTTING 9

Mechanics of chip formation, single point cutting tool, forces in machining, Types of chip, cutting
tools nomenclature, orthogonal, oblique metal cutting, thermal aspects, cutting tool materials,
tool wear, tool life, surface finish, cutting fluids and Machinability.
UNIT II TURNING MACHINES 9

Centre lathe, constructional features, specification, operations taper turning methods, thread
cutting methods, special attachments, machining time and power estimation. Capstan and turret
lathes- tool layout automatic lathes: semi automatic single spindle: Swiss type, automatic
40
screw type multi spindle.
UNIT III RECIPROCATING, MILLING AND GEAR CUTTING MACHINES 9

Reciprocating machine tools: shaper, planer, slotter: Types and operations- Hole making: Drilling,
reaming, boring, tapping, type of milling operations-attachments- types of milling cutter machining
time calculations - Gear cutting, gear hobbing and gear shaping gear finishing methods.
UNIT IV ABRASIVE PROCESSES AND BROACHING 9

Abrasive processes: grinding wheel specifications and selection, types of grinding process
cylindrical grinding, surface grinding, centreless grinding, internal grinding - micro finishing
methods - Typical applications concepts of surface integrity, broaching machines: broach
construction push, pull, surface and continuous broaching machines.
UNIT V COMPUTER NUMERICAL CONTROL MACHINE TOOLS 9

Numerical Control (NC) machine tools CNC types, constructional details, special features,
machining centre and part programming fundamentals manual part programming and computer
assisted part programming.
TOTAL: 45 PERIODS
OUTCOME:
Understand and compare the functions and applications of different metal cutting
operations, machine tools and gain knowledge in programming of CNC machines.
TEXT BOOKS:
1. Roy. A.Lindberg, Process and materials of manufacture, PHI/Pearson Education fourth,
Edition 2006.
2. Serope Kalpakjian, Steven Schmid, Manufacturing processes for engineering materials,
Pearson Education, 3rd Edition, 2009.
REFERENCES:
1. Richerd R Kibbe, John E. Neely, Roland O.Merges and Warren J.White Machine Tool
Practices, Prentice Hall of India, 1998
2. HMT Production Technology, Tata McGraw Hill, 1998.
3. Hajra Choudhury. Elements of Workshop Technology Vol.II. Media Promoters
4. Geofrey Boothroyd, Fundamentals of Metal Machining and Machine Tools, McGraw Hill,
1984
5. Rao. P.N Manufacturing Technology, Metal Cutting and Machine Tools, Tata McGraw- Hill,
New Delhi, 2003.
ME 7401 KINEMATICS OF MACHINES L T P C

3 0 0 3
OBJECTIVES:
To understand the basic components and layout of linkages in the assembly of a system/
machine.
To understand the principles in analysing the assembly with respect to the displacement,
velocity, and acceleration at any point in a link of a mechanism.
To understand the motion resulting from a specified set of linkages, design few linkage
mechanisms and cam mechanisms for specified output motions.
To understand the basic concepts of toothed gearing and kinematics of gear trains.
41
UNIT I BASIC CONCEPTS 9
Introduction- resistant bodies- kinematic link- kinematic pair- kinematics constraints- kinematic
chain- mechanism- structure Inversion of four bar chain- inversion of single slider crank chain
inversion of double crank chain Grashofs law Degrees of freedom Kutzbach criterion
Grublers criterion.
UNIT II MECHANISMS 9
Classification of mechanisms- Ratchets and Escapement mechanisms- Indexing mechanisms-
Analysis of Hookes joint Double Hookes joint- Pantograph Straight line motion Mechanisms
(Exact and Approximate)- Steering gear mechanisms.
UNIT III KINEMATICS OF LINKAGE MECHANISMS 9

Displacement, velocity and acceleration analysis of mechanisms Velocities and accelerations by
relative velocity method -Velocity analysis using instantaneous centre method- Velocities and
accelerations by Analytical method -Coriolis Acceleration.
UNIT IV KINEMATICS OF CAM MECHANISMS 9

Classification of cams and followers law of cams-Terminology and definitions Displacement
diagrams Uniform velocity, parabolic, simple harmonic, Cycloidal Derivatives of follower
motions Layout of plate cam profiles Specified contour cams Circular arc and tangent cams
Pressure angle and undercutting sizing of cams.
UNIT V GEARS AND GEAR TRAINS 9

Law of gearing Spur Gear terminology and definitions Involutes and cycloidal tooth profiles
Gear tooth action Contact ratio Interference and undercutting corrected and uncorrected
gear teeth Gear terminology and definitions -Helical, Bevel, Worm, Rack and Pinion gears Gear
trains Speed ratio, train value Epicyclic Gear Trains Differentials Automobile gear box
TOTAL:45 PERIODS
OUTCOME:
Apply the fundamentals of mechanisms and analyze new mechanisms.
TEXT BOOKS:
1. Uicker, J.J., Pennock G.R and Shigley, J.E., Theory of Machines and Mechanisms,3 rd
Edition, Oxford University Press, 2009.
2. Rattan, S.S, Theory of Machines, 3rd Edition, Tata McGraw-Hill, 2009.
REFERENCES:
1. Thomas Bevan, Theory of Machines, 3 rd Edition, CBS Publishers and Distributors, 2005.
2. Robert L. Norton, Kinematics and Dynamics of Machinery, Tata McGraw-Hill, 2010.
3. Sadhu Singh, Theory of machines, Pearson, 2013
4. Ghosh. A and Mallick, A.K., Theory of Mechanisms and Machines, Affiliated East-West Pvt.
Ltd., New Delhi, 1988.
5. Rao.J.S. and Dukkipati.R.V. Mechanisms and Machine Theory, Wiley-Eastern Ltd., New
Delhi, 1992.
6. John Hannah and Stephens R.C., Mechanics of Machines, Viva Low-Prices Student Edition,
1999.
7. V.Ramamurthi, Mechanics of Machines, Narosa Publishing House, 2002.
8. Khurmi, R.S.,Theory of Machines,14th Edition, S Chand Publications 2015.
42
ME 7402 THERMAL ENGINEERING - I L T P C
3 0 0 3
OBJECTIVES:
To apply the concepts and laws of thermodynamics for cycle analysis and performance of
heat engines - Internal Combustion(IC) engines and Gas Turbines.
To get an insight on the working and performance of air compressors
To understand the working of various auxiliary systems present in IC engines.
UNIT I GAS AND STEAM POWER CYCLES 9

Air Standard Cycles - Otto, Diesel, Dual, Brayton Cycle Analysis, Performance and Comparison
Rankine, reheat and regenerative cycle.
UNIT II RECIPROCATING AIR COMPRESSOR 9

Classification and comparison, working principle, work of compression - with and without
clearance, Volumetric efficiency, Isothermal efficiency and Isentropic efficiency. Multistage air
compressor with Intercooling. Working principle and comparison of Rotary compressors with
reciprocating air compressors.
UNIT III INTERNAL COMBUSTION ENGINES AND COMBUSTION 9

IC engine Classification, working, components and their functions. Ideal and actual : Valve and
port timing diagrams, p-v diagrams- two stroke & four stroke, and SI & CI engines comparison.
Geometric, operating, and performance comparison of SI and CI engines. Desirable properties
and qualities of fuels. Air-fuel ratio calculation lean and rich mixtures. Combustion in SI & CI
Engines Knocking phenomena and control.
UNIT IV INTERNAL COMBUSTION ENGINE PERFORMANCE AND SYSTEMS 9

Performance parameters and calculations. Morse and Heat Balance tests. Multipoint Fuel Injection
system and Common Rail Direct lnjection systems. Ignition systems Magneto, Battery and
Electronic. Lubrication and Cooling systems. Concepts of Supercharging and Turbocharging
Emission Norms.
UNIT V GAS TURBINES 9

Gas turbine cycle analysis open and closed cycle. Performance and its improvement -
Regenerative, Intercooled, Reheated cycles and their combinations. Materials for Turbines.
TOTAL:45 PERIODS
OUTCOMES:
Analyse the theory and performance of air-standard cycles
Understand functioning and performance of IC engines and its sub systems
Understand the working of Gas turbines and their performance
TEXT BOOKS:
1. Mahesh. M. Rathore, Thermal Engineering, 1st Edition, Tata McGraw Hill, 2010.
2. Ganesan.V , " Internal Combustion Engines" 4th Edition, Tata McGraw Hill, 2012.
REFERENCES:
1. Rudramoorthy R, Thermal Engineering, Tata McGraw Hill, New Delhi, 2003.
2. Holman .J.P., Thermodynamics, McGraw Hill, 1985.
3. Rajput .R.K, Thermal Engineering, Laxmi, 8th Edition, 2013.
43
ML 7451 ENGINEERING MATERIALS AND METALLURGY L T P C
3 0 0 3
OBJECTIVES:
To impart knowledge on construction of phase diagrams and also the importance of iron-
iron carbide phase diagram.
To impart knowledge on different heat treatment processes used in industries and the
basics behind the microstructure formation.
To impart knowledge on the properties and applications of various engineering materials.
To expose testing methods and procedures to find the mechanical properties of
engineering materials.
UNIT I CONSTITUTION OF ALLOYS AND PHASE DIAGRAMS 9

Constitution of alloys Solid solutions, substitutional and interstitial phase diagrams,
Isomorphous, eutectic, eutectoid, peritectic, and peritectoid reactions, Iron Iron carbide phase
diagram. Classification of steel and cast Iron- microstructure, properties and application.
UNIT II HEAT TREATMENT 9

Definition Full annealing, stress relief annealing, recrystallisation annealing and spheroidising
normalizing, hardening and tempering of steel. Isothermal transformation diagrams cooling
curves superimposed on I.T. diagram Continuous Cooling Transformation (CCT) diagram
Austempering, Martempering Hardenability, Jominy end quench test -case hardening,
carburizing, nitriding, cyaniding, carbonitriding Flame and Induction hardening Vacuum and
Plasma hardening Thermo-mechanical treatments- elementary ideas on sintering.
UNIT III FERROUS AND NON-FERROUS METALS 9

Effect of alloying additions on steel (Mn, Si, Cr, Mo, V, Ti & W) stainless and tool steels HSLA -
Maraging steels Grey, white, malleable, spheroidal and alloy cast irons, Copper and its alloys
Brass, Bronze and Cupronickel Aluminium and its alloys; Al-Cu precipitation strengthening
treatment Titanium alloys, Mg-alloys, Ni-based superalloys Properties and Applications.
UNIT IV NON-METALLIC MATERIALS 9

Polymers types of polymer, commodity and engineering polymers Properties and applications
of PE, PP, PS, PVC, PMMA, PET, PC, PA, ABS,PAI, PPO, PPS, PEEK, PTFE, Thermo set
polymers Urea and Phenol formaldehydes - Engineering Ceramics Properties and
applications of Al2O3, SiC, Si3N4, PSZ and SIALON Composites- Matrix and reinforcement
Materials- applications of Composites - Nano composites.
UNIT V MECHANICAL PROPERTIES AND DEFORMATION MECHANISMS 9

Mechanisms of plastic deformation, slip and twinning Types of fracture Testing of materials
under tension, compression and shear loads Hardness tests (Brinell, Vickers and Rockwell),
Micro and nano-hardness tests, Impact test - lzod and Charpy, Fatigue and Creep failure
mechanisms.
TOTAL:45 PERIODS
OUTCOMES:
Understand the phase diagrams and relate to the heat treatment processes.
Tailor structure-property correlations to engineering materials.
Select proper engineering materials for various engineering applications.
Perform various testings to find the properties of engineering materials.
TEXT BOOKS:
1. Sydney H.Avner, Introduction to Physical Metallurgy, McGraw Hill Book Company, 1994
2. Kenneth G.Budinski and Michael K. Budinski, Engineering Materials, Prentice Hall of India
Private Limited, 4th Indian Reprint 2002.
44
REFERENCES:
1. Rahavan.V, Materials Science and Engineering, Prentice Hall of India Pvt.Ltd. 1999.
2. G.S. Upadhyay and Anish Upadhyay, Materials Science and Engineering, Viva Books
Pvt.Ltd, New Delhi, 2006.
3. Williams D Callister, Materials Science and Engineering Wiley India Pvt Ltd, Revised Indian
edition 2007.
ME 7361 MANUFACTURING TECHNOLOGY LABORATORY - II L T P C

0 0 4 2
OBJECTIVE:
To study and acquire knowledge on various basic machining operations and special
purpose machines and their applications.
LIST OF EXPERIMENTS
1. Taper Turning and Eccentric Turning using lathe
2. External and Internal Thread cutting using lathe
3. Knurling
4. Shaping Square and Hexagonal Heads
5. Drilling and Reaming
6. Contour milling - vertical milling machine
7. Spur and helical gear cutting using milling machine
8. Gear generation using gear hobber
9. Gear generation using gear shaper
10. Grinding Cylindrical, Surface and Centerless grinding
11. Tool angle grinding with tool and Cutter Grinder
12. Spline Broaching
13. Measurement of cutting forces in Milling /Turning Process
14. CNC Part Programming
TOTAL: 60 PERIODS
OUTCOMES:
Upon completion of this course, the students will be to:
Utilise various machine tools
Develop CNC part programs.
ME 7411 THERMAL ENGINEERING LABORATORY I L T P C

0 0 4 2
OBJECTIVES:
To study the performance characteristics of various engines
To understand the need for proper in engines
To understand boiler operation and conduct a performance test on a boiler and steam
turbine
UNIT I IC ENGINE LAB 30

1. Valve Timing and Port Timing diagrams.
2. Actual p-v diagrams of IC engines.
3. Performance test of Reciprocating Air compressor
4. Performance Test on four stroke Diesel Engine.
5. Heat Balance Test on 4 stroke Diesel Engine.
45
6. Morse Test on Multi-cylinder Petrol Engine.
7. Retardation Test on a Diesel Engine.
8. Determination of p- diagram and heat release characteristics of an IC engine.
9. Determination of Flash Point and Fire Point of various fuels / lubricants.
UNIT II STEAM LAB 30

1. Study of Steam Generators and Turbines.
2. Performance and Energy Balance Test on a Steam Generator.
3. Performance and Energy Balance Test on Steam Turbine.
TOTAL:60 PERIODS
OUTCOMES:
Understand the performance parameters of IC engines and their significance
Understand the importance of valve timing, and overlap on performance
Understand the necessity and significance of a boiler trial
Understand the performance parameters in a reciprocating compressor.
ME 7501 DYNAMICS OF MACHINES L T P C

4 0 0 4
OBJECTIVES:
To understand the force-motion relationship in components subjected to external forces
and analysis of standard mechanisms.
To understand the effects of unbalances resulting from prescribed motions in mechanisms.
To understand the fundamentals of vibrations.
To understand the principles in mechanisms used for governing of machines.
UNIT I FORCE ANALYSIS 12

Applied and constraint forces Free body diagrams Static equilibrium conditions force
equilibrium analysis of simple mechanisms - friction in mechanisms Dynamic force analysis
Inertia force and Inertia torque D Alemberts principle Dynamic Analysis in reciprocating
engines Gas forces Inertia effect of connecting rod Bearing loads Crank shaft torque
Turning moment diagrams Flywheels for engines and punching presses.
UNIT II BALANCING 12
Static and dynamic balancing Balancing of rotating masses Balancing a single cylinder engine
Balancing of Multi-cylinder inline engines, V-engines Partial balancing in engines Balancing
of linkages Balancing machines- Balancing standards - Field balancing of single disc.
UNIT III FREE VIBRATION 12

Basics of vibratory systems Degrees of freedom Natural frequency -Spring mass system-
Equations of motion Viscously damped free vibration- Logarithmic decrement- Transverse
vibration Dunkerleys method- Critical speed of shafts -Two and three rotor torsional vibration.
UNIT IV FORCED VIBRATION 12

Response of one degree freedom system to Harmonic excitation force Vibration Isolation -
rotating unbalance - support motion Transmissibility - Energy dissipated by damping- Vibration
measuring instruments.
46
UNIT V MECHANISMS FOR CONTROL 12
Governors Types Centrifugal governors Gravity controlled and spring controlled centrifugal
governors Characteristics Effect of friction Controlling force. Gyroscopes Gyroscopic forces
and torques Gyroscopic stabilization Gyroscopic effects in Automobiles, ships and airplanes.
TOTAL:60 PERIODS
OUTCOME:
Analyse the forces acting in a mechanical system and related vibration issues.
TEXT BOOKS:
1. Uicker, J.J., Pennock G.R and Shigley, J.E., Theory of Machines and Mechanisms,3rd
Edition, Oxford University Press, 2009.
2. Rattan, S.S, Theory of Machines, 3rd Edition, Tata McGraw-Hill, 2009.
REFERENCES:
1. Thomas Bevan, Theory of Machines, 3 rd Edition, CBS Publishers and Distributors, 2005.
2. Robert L. Norton, Kinematics and Dynamics of Machinery, Tata McGraw-Hill, 2009.
3. Ghosh. A andMallick, A.K., Theory of Mechanisms and Machines, Affiliated East-West Pvt.
Ltd., New Delhi, 1988.
4. Rao.J.S. and Dukkipati.R.V. Mechanisms and Machine Theory, Wiley-Eastern Ltd., New
Delhi, 1992.
5. Grover. G.T., Mechanical Vibrations, Nem Chand and Bros., 1996
6. V.Ramamurthi, Mechanics of Machines, Narosa Publishing House, 2002.
7. Khurmi, R.S.,Theory of Machines,14th Edition, S Chand Publications 2015
ME 7502 METROLOGY AND MEASUREMENTS L T P C

3 0 0 3
OBJECTIVE:
To expose the science behind the measurements and their applications in manufacturing
industries in quality control.
UNIT I BASICS OF METROLOGY 9

Need for Metrology, Role in quality control, Factors affecting measurement - SWIPE; Errors in
Measurements Types Control Measurement uncertainty Types, Estimation, Problems on
Estimation of Uncertainty, Statistical analysis of measurement data, Calibration of measuring
instruments, ISO standards.
UNIT II LINEAR AND ANGULAR MEASUREMENTS 9
Linear Measuring Instruments Vernier caliper, Micrometer, Vernier height gauge, Depth
Micrometer, Bore gauge, Telescoping gauge; Tolerance Interchangeability, Selective assembly,
Terminology, Limits and Fits, Problems; Design of Limit gauges, Problems, Gauge blocks Use
and precautions, Comparators Working and advantages; Toolmakers microscope Profile
projector - Angular measuring instruments Bevel protractor, Clinometer, Angle gauges, Precision
level, Sine bar, Autocollimator, Angle dekkor, Alignment telescope.
UNIT III METROLOGY OF SURFACES 9

Fundamentals of GD & T- Measurement of straightness, flatness and roundness, Simple problems
Measurement of Surface finish Functionality of surfaces, Parameters, Comparative, Stylus
based and Optical Measurement techniques, Filters, Introduction to 3D surface metrology.
UNIT IV METROLOGY OF ASSEMBLY AND TRANSMISSION ELEMENTS 9

Measurement of Screw threads purpose Dimensioning Limit gauging Size limits Single
element measurements Pitch Diameter, Lead, Pitch.
Measurement of Gears purpose Analytical measurement Runout, Pitch variation, Tooth
profile, Tooth thickness, Lead Functional checking Rolling gear test.
47
UNIT V ADVANCES IN METROLOGY 9
Lasers in metrology - Advantages of lasers Laser scan micrometers; Laser interferometers
Applications Straightness, Alignment; Ball bar tests, Computer Aided Metrology - Basic concept
of CMM Types of CMM Constructional features Probes Accessories Software
Applications Multisensor CMMs.
Machine Vision - Basic concepts of Machine Vision System Elements Applications - On-line
and in-process monitoring in production - Computed tomography White light Scanners.
TOTAL: 45 PERIODS
OUTCOME:
Make logical, rational and economical choice of measuring equipment / method to analyse
and improve manufacturing processes.
TEXT BOOKS:
1. Dotson Connie, Dimensional Metrology, Cengage Learning, First edition, 2012.
2. Mark Curtis, Francis T. Farago, Handbook of Dimensional Measurement, Industrial Press,
Fifth edition, 2013.
REFERENCES:
1. J.F.W. Galyer, Charles Reginald Shotbolt, Metrology for Engineers, Cengage Learning
EMEA; 5th revised edition, 1990.
2. Toru Yoshizawa, Handbook of Optical Metrology: Principles and Applications, CRC Press,
2009.
3. James G. Bralla, Handbook of Product Design for Manufacture, McGraw Hill Book Co., 2004.
4. S. P. Venkateshan, Mechanical Measurements, Second edition, John Wiley & Sons, 2015.
5. Balasubramanian Muralikrishnan and Jayaraman Raja, Computational Surface and
Roundness Metrology, Springer-Verlag London Ltd., 2009.
6. Robert J. Hocken (Editor) and Paulo H. Pereira, Coordinate Measuring Machines and
Systems, Second Edition (Manufacturing Engineering and Materials Processing), 2nd Edition,
CRC Press, 2011.
7. Ammar Grous, Applied Metrology for Manufacturing Engineering, Wiley-ISTE, 2011.
8. N.V. Raghavendra and L. Krishnamurthy, Engineering Metrology and Measurements, Oxford
9. NPL Measurement good practice guides relevant to the syllabus No. 40, No. 41, No. 42, No.
43, No. 80, No. 118, No. 130, No. 131.
ME 7503 THERMAL ENGINEERING - II L T P C

3 0 0 3
OBJECTIVES:
To apply the thermodynamic concepts for systems like Nozzles, Boilers, Turbines, and
Refrigeration & Air Conditioning Systems.
To understand the concept of utilising residual heat in thermal systems.
UNIT I STEAM NOZZLE 9

Types and Shapes of nozzles, Flow of steam through nozzles, Critical pressure ratio, Variation of
mass flow rate with pressure ratio. Effect of friction. Metastable flow.
UNIT II BOILERS 9
Types and comparison. Mountings and Accessories. Fuels - Solid, Liquid and Gas. Performance
calculations, Boiler trial.
UNIT III STEAM TURBINES 9

Types, Impulse and reaction principles, Velocity diagrams, Work done and efficiency optimal
operating conditions. Multi-staging, compounding and governing.
48
UNIT IV COGENERATION AND RESIDUAL HEAT RECOVERY 9
Cogeneration Principles, Cycle Analysis, Applications, Source and utilisation of residual heat. Heat
pipes, Heat pumps, Recuperative and Regenerative heat exchangers. Economic Aspects.
UNIT V REFRIGERATION AND AIR CONDITIONING 9

Vapour compression refrigeration cycle, Effect of Superheat and Sub-cooling, Performance
calculations, Working principle of air cycle, vapour absorption system, and Thermoelectric
refrigeration. Air conditioning systems, concept of RSHF, GSHF and ESHF, Cooling load
calculations. Cooling towers concept and types.
TOTAL:45 PERIODS
OUTCOMES:
Understand the working of Nozzles, Boilers & Steam Turbines and their performance
Understand cogeneration, its types, source of residual heat and their utilising techniques
Understand the working of Refrigeration & Air- conditioning systems and perform cooling
load calculations to determine heating loads
TEXT BOOKS:
1. Mahesh. M. Rathore, Thermal Engineering, 1st Edition, Tata Mc Graw Hill Publications, 2010.
2. Kothandaraman, C.P., Domkundwar .S and Domkundwar A.V.,A course in Thermal
Engineering, Dhanpat Rai & Sons, 7th Edition, 2010.
REFERENCES:
1. Ballaney. P.L ." Thermal Engineering, Khanna publishers, 24th Edition 2012
2. Arora .C.P., Refrigeration and Air Conditioning, Tata Mc Graw Hill, 1994
3. Donald Q. Kern, Process Heat Transfer, Tata Mc Graw Hill, 1997.
4. Charles H Butler : Cogeneration McGraw Hill, 1984.
5. Sydney Reiter Industrial and Commercial Heat Recovery Systems Van Nostrand
6. Reinhols, 1985.
7. David Gunn, Robert Horton, Industrial Boilers Longman Scientific and Technical
8. Publication, 1986.
ME 7552 DESIGN OF MACHINE ELEMENTS L T P C

4 0 0 4
OBJECTIVES:
To understand the various steps involved in the Design Process
To understand the principles involved in evaluating the shape and dimensions of a
component to satisfy functional and strength requirements.
To learn the use of standard practices in design.
UNIT I FUNDAMENTAL CONCEPTS IN DESIGN 12

Introduction to the design process - factors influencing machine design, selection of materials
based on mechanical properties - Preferred numbers, fits and tolerances Direct, Bending and
torsional loading- Modes of failure - Factor of safety Combined loads Principal stresses
Impact and shock loading Eccentric loading curved beams crane hook and C frame-
theories of failure Design based on strength and stiffness stress concentration Fluctuating
stresses Endurance limit Notch sensitivity - Design for finite and infinite life under variable
loading - Exposure to standards.
UNIT II SHAFTS AND COUPLINGS 12

Shafts and Axles - Design of solid and hollow shafts based on strength, rigidity and critical speed
Keys and splines Rigid and flexible couplings.
49
UNIT III TEMPORARY AND PERMANENT JOINTS 12
Threaded fasteners - Bolted joints Simple and eccentrically loaded bolted joints, Knuckle joints,
Cotter joints, Welded joints Butt, Fillet and parallel transverse fillet welds welded joints
subjected to bending, torsional and eccentric loads, riveted joints for structures Caulking and
fullering efficiency of joints Strength equations.
UNIT IV ENERGY STORING ELEMENTS AND ENGINE COMPONENTS 12

Types of springs, design of helical and concentric springssurge in springs, Design of laminated
springs - Flywheels considering stresses in rims and arms for engines and presses - Solid and
Rimmed flywheels - Connecting Rods and crank shafts.
UNIT V BEARINGS 12
Sliding contact and rolling contact bearings - Hydrodynamic journal bearings, Sommerfeld
Number, Raimondi & Boyd graphs, -- Selection of Rolling Contact bearings -Seals and Gaskets.
TOTAL:60 PERIODS
OUTCOMES:
Appreciate the functions of various machine elements and assemblies
Design various machine components according to the requirement as per the prescribed
standards
Use standard design data books.
TEXT BOOKS:
1. Joseph Shigley, Charles Mischke, Richard Budynas and Keith Nisbett Mechanical
Engineering Design, 8th Edition, Tata McGraw-Hill , 2008.
2. Bhandari V, Design of Machine Elements, 15thReprint, Tata McGraw-Hill Book Co, 2014.
REFERENCES:
1. Sundararajamoorthy T. V. Shanmugam .N, Machine Design, Anuradha Publications,
Chennai, 2003.
2. Mohammed. Jalaludeen Machine Design, Volume I, Design of Machine Elements, 4th
edition, Anuradha Publications, 2014.
3. Robert C. Juvinall and Kurt M. Marshek, Fundamentals of Machine component Design,5th
Edition, Wiley, 2011
4. Orthwein W, Machine Component Design, Jaico Publishing Co, 2006.
5. Ansel Ugural, Mechanical Design An Integral Approach, 1st Edition, Tata McGraw-Hill Book
Co, 2003.
6. M F. Spotts, Terry E. Shoup and Lee E. Hornberger, Design of Machine Elements 8th
Edition, Printice Hall, 2003.
7. Design Data Hand Book, PSG College of Technology, 2013- Coimbatore.
ME 7553 HYDRAULICS AND PNEUMATICS L T P C

3 0 0 3
OBJECTIVES:
To provide student with knowledge on the application of fluid power in process,
construction and manufacturing Industries.
To provide students with an understanding of the fluids and components utilized in modern
industrial fluid power system.
To develop a measurable degree of competence in the design, construction and operation
of fluid power circuits.
50
UNIT I FLUID POWER PRINICIPLES AND HYDRAULIC PUMPS 9
Introduction to Fluid power Advantages and Applications Fluid power systems Types of fluids
- Properties of fluids and selection Basics of Hydraulics Pascals Law Principles of flow -
Friction loss Work, Power and Torque Problems, Sources of Hydraulic power : Pumping Theory
Pump Classification Construction, Working, Design, Advantages, Disadvantages,
Performance, Selection criteria of Linear and Rotary Fixed and Variable displacement pumps
Problems.
UNIT II HYDRAULIC ACTUATORS AND CONTROL COMPONENTS 9

Hydraulic Actuators: Cylinders Types and construction, Application, Hydraulic cushioning
Hydraulic motors - Control Components : Direction Control, Flow control and pressure control
valves Types, Construction and Operation Servo and Proportional valves Applications
Accessories : Reservoirs, Pressure Switches Applications Fluid Power ANSI Symbols
Problems.
UNIT III HYDRAULIC CIRCUITS AND SYSTEMS 9

Accumulators, Intensifiers, Industrial hydraulic circuits Regenerative, Pump Unloading, Double-
Pump, Pressure Intensifier, Air-over oil, Sequence, Reciprocation, Synchronization, Fail-Safe,
Speed Control, Hydrostatic transmission, Electro hydraulic circuits, Mechanical hydraulic servo
systems.
UNIT IV PNEUMATIC AND ELECTRO PNEUMATIC SYSTEMS 9

Properties of air Perfect Gas Laws Compressor Filters, Regulator, Lubricator, Muffler, Air
control Valves, Quick Exhaust Valves, Pneumatic actuators, Design of Pneumatic circuit
Cascade method Electro Pneumatic System Elements Ladder diagram Problems,
Introduction to fluidics and pneumatic logic circuits.
UNIT V TROUBLE SHOOTING AND APPLICATIONS 9

Installation, Selection, Maintenance, Trouble Shooting and Remedies in Hydraulic and Pneumatic
systems, Design of hydraulic circuits for Drilling, Planning, Shaping, Surface grinding, Press and
Forklift applications. Design of Pneumatic circuits for Pick and Place applications and tool handling
in CNC Machine tools Low cost Automation Hydraulic and Pneumatic power packs.
TOTAL:45 PERIODS
OUTCOMES:
Identify hydraulic and pneumatic components and its symbol and usage.
Ability to design hydraulic and pneumatic circuits.
TEXT BOOKS:
1. Anthony Esposito, Fluid Power with Applications, Prentice Hall, 2009.
2. James A. Sullivan, Fluid Power Theory and Applications, Fourth Edition, Prentice Hall, 1997.
REFERENCES:
1. Shanmugasundaram.K, Hydraulic and Pneumatic Controls. Chand & Co, 2006.
2. Majumdar, S.R., Oil Hydraulics Systems Principles and Maintenance, Tata McGRaw Hill,
2001.
3. Majumdar, S.R., Pneumatic Systems Principles and Maintenance, Tata McGRaw Hill,
2007.
4. Dudley, A. Pease and John J Pippenger, Basic Fluid Power, Prentice Hall, 1987
5. Srinivasan.R, Hydraulic and Pneumatic Controls, Vijay Nicole Imprints, 2008
6. Joshi.P, Pneumatic Control, Wiley India, 2008.
7. Jagadeesha T, Pneumatics Concepts, Design and Applications , Universities Press, 2015.
51
ME 7511 METROLOGY AND DYNAMICS LABORATORY L T P C
0 0 4 2
OBJECTIVES:
To give an understanding of some of the basic measurements carried out in manufacturing
industries and the importance of calibrating measuring instruments.
To understand the principles of kinematics and Dynamics involved in various mechanisms

UNIT I METROLOGY AND MEASUREMENTS 30
LIST OF EXPERIMENTS
1. Calibration and use of measuring instruments Vernier caliper, micrometer, Vernier height
gauge using gauge blocks
2. Calibration and use of measuring instruments depth micrometer, bore gauge, telescopic
gauge
3. Measurement of linear dimensions using Comparators
4. Measurement of angles using bevel protractor and sine bar
5. Measurement of screw thread parameters Screw thread Micrometers, Three wire method,
Toolmakers microscope
6. Measurement of gear parameters Micrometers, Vernier caliper, Gear tester
7. Measurement of features in a prismatic component using Coordinate Measuring Machine
(CMM)
8. Programming of CNC Coordinate Measuring Machines for repeated measurements of identical
components
9. Non-contact (Optical) measurement using Measuring microscope / Profile projector and Video
measurement system
10. Measurement of form parameters Straightness, Flatness, Roundness, Cylindricity,
Perpendicularity, Runout, Concentricity in the given component using Roundness tester.
11. Measurement of Surface finish in components manufactured using various processes (turning,
milling, grinding, etc.,) using stylus based instruments
12. Machine tool metrology Level tests using precision level; Testing of straightness of a
machine tool guide way using Autocollimator, spindle tests.
UNIT II DYNAMICS MEASUREMENTS 30

LIST OF EXPERIMENTS
1. a) Study of gear parameters.
b) Experimental study of velocity ratios of simple, compound, epicyclic and differential gear
trains.
2. a) Kinematics of Crank Rocker, Double crank, Double rocker, Slider Crank and Oscillating
cylinder Mechanisms.
b) Kinematics of single and double universal joints.
3. a) Determination of Mass moment of inertia of Fly wheel and Axle system.
b) Determination of Mass Moment of Inertia of axisymmetric bodies using Turn table apparatus.
c) Determination of Mass Moment of Inertia using bifilar suspension and compound pendulum.
4. Motorized gyroscope Study of gyroscopic effect and couple.
5. Governor - Determination of range sensitivity and effort for Watts, Porter, Proell, and Hartnell
Governors.
6. Cams Cam profile drawing, Motion curves and study of jump phenomenon
7. a) Single degree of freedom Spring Mass System Determination of natural Frequency and
verification of Laws of springs Damping coefficient determination.
b) Multi degree freedom suspension system Determination of influence coefficient.
8. a) Determination of torsional natural frequency of single and double rotor systems - Undamped
and Damped Natural frequencies.
b) Vibration Absorber Tuned vibration absorber.
9. Vibration of Equivalent Spring mass system undamped and damped vibration.
10. Whirling of shafts Determination of critical speeds of shafts with concentrated loads.
11. a) Balancing of rotating masses. (b) Balancing of reciprocating masses.
12. a) Transverse vibration of Free-Free beam with and without concentrated masses.
b) Forced Vibration of Cantilever beam Mode shapes and natural frequencies.
52
c) Determination of transmissibility ratio using vibrating table.
TOTAL:60 PERIODS
OUTCOMES:
Use and calibrate various measuring instruments
Understand the measurement of various kinematic and vibration parameters.
ME 7561 COMPUTER AIDED MACHINE DRAWING L T P C

0 0 4 2
OBJECTIVES:
To make the students understand and interpret drawings of machine components
To prepare assembly drawings both manually and using standard CAD packages
To familiarize the students with Indian Standards on drawing practices and standard
components
To gain practical experience in handling 2D drafting and 3D modeling software systems.
UNIT I DRAWING STANDARDS & FITS AND TOLERANCES 12

Code of practice for Engineering Drawing, BIS specifications Welding symbols, riveted joints,
keys, fasteners Reference to hand book for the selection of standard components like bolts,
nuts, screws, keys etc. - Limits, Fits Tolerancing of individual dimensions Specification of Fits
Preparation of production drawings and reading of part and assembly drawings, basic principles of
geometric dimensioning & tolerancing.
UNIT II INTRODUCTION TO 2D DRAFTING 16

Drawing, Editing, Dimensioning, Layering, Hatching, Block, Array, Detailing, Detailed
drawing.
Bearings - Bush bearing, Plummer block
Valves Safety and non-return valves.
UNIT III 3D GEOMETRIC MODELING AND ASSEMBLY 32

Sketcher - Datum planes Protrusion Holes - Part modeling Extrusion Revolve Sweep
Loft Blend Fillet - Pattern Chamfer - Round - Mirror Section - Assembly
Couplings Flange, Universal, Oldhams, Muff, Gear couplings
Joints Knuckle, Gib & cotter, strap, sleeve & cotter joints
Engine parts Piston, connecting rod, cross-head (vertical and horizontal), stuffing box,
multi-plate clutch
Miscellaneous machine components Screw jack, machine vice, tail stock, chuck, vane
and gear pumps
TOTAL:60 PERIODS
Total:20% of classes for theory classes and 80% of classes for practice
Note: 25% of assembly drawings must be done manually and remaining 75% of assembly
drawings must be done by using any CAD software. The above tasks can be performed manually
and using standard commercial 2D / 3D CAD software.
OUTCOMES:
Appreciate the functions of various machine assemblies,
Draw part drawings, sectional views and assembly drawings as per standards
TEXT BOOK:
nd
1. Gopalakrishna K.R., Machine Drawing, 22 Edition, Subhas Stores Books Corner,
Bangalore, 2013.
53
REFERENCES:
1. N. D. Bhatt and V.M. Panchal, Machine Drawing, 48th Edition, Charotar Publishers,2013
2. Junnarkar, N.D., Machine Drawing, 1st Edition, Pearson Education, 2004
3. N. Siddeshwar, P. Kanniah, V.V.S. Sastri, Machine Drawing , published by Tata Mc
GrawHill,2006
4. S. Trymbaka Murthy, A Text Book of Computer Aided Machine Drawing, CBS Publishers,
New Delhi, 2007
ME 7354 MECHATRONICS L T P C
3 0 0 3
OBJECTIVE:
To impart knowledge about the elements and techniques involved in Mechatronics systems
in understanding the concept of automation.
Introduction to Mechatronics Systems Need for Mechatronics Emerging areas of
Mechatronics Classification of Mechatronics. Sensors and Transducers: Static and Dynamic
Characteristics of Sensor, Potentiometers LVDT Capacitance Sensors Strain Gauges Eddy
Current Sensor Hall Effect Sensor Temperature Sensors Light Sensors.
UNIT II 8085 MICROPROCESSOR 9

Introduction Pin Configuration - Architecture of 8085 Addressing Modes Instruction set,
Timing diagram of 8085.
UNIT III PROGRAMMABLE PERIPHERAL INTERFACE 9

Introduction Architecture of 8255, Keyboard Interfacing, LED display Interfacing, ADC and
DAC Interface, Temperature Control Stepper Motor Control Traffic Control Interface.
UNIT IV PROGRAMMABLE LOGIC CONTROLLER 9

Introduction Architecture Input / Output Processing Programming with Timers, Counters and
Internal relays Data Handling Selection of PLC.
UNIT V ACTUATORS AND MECHATRONICS SYSTEM DESIGN 9

Types of Stepper and Servo motors Construction Working Principle Characteristics, Stages
of Mechatronics Design Process Comparison of Traditional and Mechatronics Design Concepts
with Examples Case studies of Mechatronics Systems Pick and Place Robot Engine
Management system Automatic Car Park Barrier.
TOTAL:45 PERIODS
OUTCOME:
Design Mechatronics systems with the help of Microprocessor, PLC and other Electrical
and Electronics Circuits.
TEXT BOOKS:
1. Bolton W., Mechatronics, Pearson Education, 4th Edition, 2011.
2. Ramesh S Gaonkar, Microprocessor Architecture, Programming, and Applications with the
8085, Penram International Publishing Private Limited, 6th Edition, 2015.
REFERENCES:
1. Smaili.A and Mrad.F, Mechatronics Integrated Technologies for Intelligent Machines, Oxford
2. Davis G.Alciatore and Michael B.Histand, Introduction to Mechatronics and Measurement
54
systems, McGraw Hill Education, 2011.
3. Bradley D.A., Dawson D., Buru N.C. and Loader A.J., Mechatronics, Chapman and Hall,
1993.
4. Nitaigour Premchand Mahalik, Mechatronics Principles, Concepts and Applications, McGraw
Hill Education, 2015.
5. Devadas Shetty and Richard A. Kolk, Mechatronics Systems Design, Cengage Learning,
2010.
ME 7551 COMPUTER AIDED DESIGN L T P C

3 0 0 3
OBJECTIVES:
To understand fundamental concepts of computer graphics and its tools in a generic
framework.
To provide clear understanding of CAD systems for 3D modeling and viewing.
UNIT I FUNDAMENTALS OF COMPUTER GRAPHICS 9

Product cycle- Design process - Computer Aided Design Computer graphics co-ordinate
systems- 2D and 3D transformations- homogeneous coordinates - graphic primitives (point, line,
circle drawing algorithms) - Clipping- viewing transformation.
UNIT II GEOMETRIC MODELING 9

Representation of curves - Hermite cubic spline curve, Bezier curve, B-spline curves, Surface
Modeling Surface Entities, Representation of Surface, Bezier Surface, B-Spline Surface
and Coons Surface. Solid Modeling - Solid Entities, Solid Representation, Boundary
Representation (B-Rep), Sweeps Representation, Constructive Solid Geometry (CSG).
UNIT III VISUAL REALISM 9

Need for hidden surface removal, The Depth - Buffer Algorithm, Properties that help in reducing
efforts, Scan Line coherence algorithm, Span - Coherence algorithm, Area-Coherence Algorithms,
Warnocks Algorithm, Priority Algorithms shading colouring computer animation.
UNIT IV PART ASSEMBLY 9

Mass properties - Assembly modeling Inference of position and orientation Geometric
Dimensioning and Tolerancing Functional importance of various types of fits, Geometrical
dimensioning and Tolerancing, Tolerance stacking types and remedies.
UNIT V CAD STANDARDS 9

Standards for computer graphics- Graphical Kernel System (GKS) - Open Graphics Library
(OpenGL) - Data exchange standards - IGES, STEP, ACIS and DXF - communication standards.
TOTAL : 45 PERIODS
OUTCOMES:
Understand the various stages in the design process and the role of computer graphic
communication process.
Understand the mathematics behind the use of computer for modeling of mechanical
components
TEXT BOOK:
1. Ibrahim Zeid Mastering CAD CAM Tata McGraw-Hill Publishing Co.2007
55
REFERENCES:
1. Chris McMahon and Jimmie Browne CAD/CAM Principles, practice and manufacturing
management Pearson education Asia, 2001.
2. William M Neumann and Robert F.Sproul Principles of Computer Graphics, McGraw Hill
Book Co. Singapore, 1989.
3. Donald Hearn and M. Pauline Baker Computer Graphics. Prentice Hall, Inc, 1992.
4. Foley, Wan Dam, Feiner and Hughes Computer graphics principles & practice, Pearson
Education - 2003.
ME 7601 DESIGN OF TRANSMISSION SYSTEMS L T P C

4 0 0 4
OBJECTIVES:
To gain knowledge on the principles and procedures for the design of mechanical power
transmission components.
To understand the standard procedures available for design of transmission elements.
UNIT I DESIGN OF FLEXIBLE ELEMENTS 12

Motor power capacity for various applications - Design of Flat belts and pulleys - Selection of V
belts and sheaves Selection of wire ropes and pulleys Design of Transmission chains and
Sprockets.
UNIT II SPUR AND HELICAL GEARS 12

Gear materials - Design of straight tooth spur & helical gears based on speed ratios, number of
teeth, Fatigue strength, Factor of safety, strength and wear considerations. Force analysis -Tooth
stresses - Dynamic effects - Helical gears Module - normal and transverse, Equivalent number of
teeth - forces.
UNIT III BEVEL AND WORM GEARS 12
Straight bevel gear: Gear materials - Tooth terminology, tooth forces and stresses, equivalent
number of teeth, estimation of dimensions of straight bevel gears.
Worm Gear: Gear materials - Tooth terminology, Thermal capacity, forces and stresses, efficiency,
estimation of dimensions of worm gear pair.
UNIT IV GEAR BOXES 12

Need - Design of sliding and constant mesh gear boxes: Speed selection - Geometric progression
- Standard step ratio - Ray diagram, kinematic layout Determination of number of teeth. Design
of multi speed gear box for machine tool applications, Variable speed gear box, Fluid Couplings,
Torque Converters for automotive applications.
UNIT V CLUTCHES, BRAKES AND CAMS 12

Design of single and multi plate clutches, cone clutches, internal expanding rim clutches and
Electromagnetic clutches. Design of brakes: External shoe brakes - Single and Double Shoe,
Internal expanding shoe brakes and Band brakes.
Design of Cams: Types- Pressure angle and under cutting, determination of base circle -forces
and surface stresses.
TOTAL:60 PERIODS
Note: (Use of standard Design Data Book is permitted in the University examination)
OUTCOMES:
Appreciate the functions of various transmission elements and their assemblies
Design different transmission components according to the requirement as per standards
using data books.
56
TEXT BOOKS:
1. Joseph Shigley,Charles Mischke, Richard Budynas and Keith Nisbett Mechanical Engineering
Design, 10th Edition, Tata McGraw-Hill, 2014.
2. Sundararajamoorthy T. V and Shanmugam .N, Machine Design, 9th edition, Anuradha
Publications, Chennai, 2003.
REFERENCES:
1. Bhandari V, Design of Machine Elements, 15th Reprint, Tata McGraw-Hill Book Co, 2014.
2. Prabhu. T.J., Design of Transmission Elements, Mani Offset, Chennai, 2003.
3. Md. Jalaludeen , Machine Design, Volume II, Design of Transmission Systems, 4th edition,
Anuradha Publications, 2014.
4. GitinMaitra,L. Prasad Handbook of Mechanical Design, 2nd Edition, Tata McGraw-Hill,2001.
5. C.S.Sharma, Kamlesh Purohit, Design of Machine Elements, Prentice Hall of India,Pvt. Ltd.,
2003.
6. Bernard Hamrock, Steven Schmid, Bo Jacobson, Fundamentals of Machine Elements,2nd
Edition, Tata McGraw Hill, 2006.
7. Robert C. Juvinall and Kurt M. Marshek, Fundamentals of Machine component Design,5th
Edition, Wiley, 2011
8. Design Data Hand Book, PSG College of Technology, 2013- Coimbatore
ME 7602 HEAT AND MASS TRANSFER L T P C

4 0 0 4
OBJECTIVES:
To understand the mechanisms of heat transfer under steady and transient conditions.
To understand the concepts of heat transfer through extended surfaces.
To learn the thermal analysis and sizing of heat exchangers and to understand the basic
concepts of mass transfer.
UNIT I CONDUCTION 12
General Differential equation Cartesian, Cylindrical and Spherical Coordinates One
Dimensional Steady State Heat Conduction plane and Composite Systems Conduction with
Internal Heat Generation Extended Surfaces Unsteady Heat Conduction Lumped Analysis
Semi Infinite and Infinite Solids Use of Heislers charts. One dimensional Numerical analysis in
conduction.
UNIT II CONVECTION 12
Boundary Layer Concept Forced Convection: External Flow Flow over Plates, Cylinders
Spheres and Bank of tubes. Internal Flow Entrance effects. Free Convection Flow over Vertical
Plate, Horizontal Plate, Inclined Plate, Cylinders and Spheres.
UNIT III PHASE CHANGE HEAT TRANSFER AND HEAT EXCHANGERS 12

Nusselts theory of condensation- Regimes of Pool boiling and Flow boiling, correlations in boiling
and condensation. Heat Exchanger Types - Overall Heat Transfer Coefficient Fouling Factors.
LMTD and NTU methods. Introduction to TEMA Standards.
UNIT IV RADIATION 12
Radiation laws, Black Body and Gray body Radiation. Shape Factor. Electrical Analogy. Radiation
Shields. Gas Radiation.
UNIT V MASS TRANSFER 12

Basic Concepts Diffusion Mass Transfer Ficks Law of Diffusion Steady state Molecular
Diffusion. Convective Mass Transfer Momentum, Heat and Mass Transfer Analogy Convective
Mass Transfer Correlations.
TOTAL:60 PERIODS
57
OUTCOME:
Understand and apply different heat and mass transfer principles of different applications.
TEXT BOOKS:
1. Yunus A. Cengel, Heat Transfer A Practical Approach Tata McGraw Hill, Vth Edition
2013.
2. Holman, J.P., Heat and Mass Transfer, Tata McGraw Hill, 2010
REFERENCES:
1. R.C. Sachdeva, Fundamentals of Engineering Heat & Mass transfer, New Age International
Publishers, 2009
2. Frank P. Incropera and David P. Dewitt, Fundamentals of Heat and Mass Transfer, John
Wiley & Sons, 7th Edition, 2014.
3. S.P. Venkateshan, Heat Transfer, Ane Books, New Delhi, 2014.
4. Nag, P.K., Heat Transfer, Tata McGraw Hill, New Delhi, 2002
5. Ozisik, M.N., Heat Transfer, McGraw Hill Book Co., 1994.
6. Kothandaraman, C.P., Fundamentals of Heat and Mass Transfer, New Age International,
New Delhi, 2012
7. Yadav, R., Heat and Mass Transfer, Central Publishing House, 2012.
HS7561 COMMUNICATION SKILLS AND SOFT SKILLS L T P C

1 0 2 2
COURSE DESCRIPTION
This course aims to help engineering students acquire the employability skills necessary for the
workplace. It also attempts to meet the expectations of the employers by giving special attention to
presentation skills, group discussion skills and soft skills. This aim will be achieved through expert
guidance and teaching activities focusing on the above listed skills and language skills in the
Language Laboratory.
OBJECTIVES
To enhance the employability skills of students with a special focus on presentation skills,
group discussion skills and interview skills and soft skills.
To help them improve their writing skills necessary for the workplace situation.
CONTENTS
UNIT I WRITING SKILLS
Preparing job applications writing the cover letter and resume applying for jobs online e-mail
etiquette writing reports collecting, analyzing and interpreting data.
UNIT II SOFT SKILLS

Hard skills & soft skills soft skills: self-management skills & people skills training in soft skills
persuasive skills sociability skills interpersonal skills team building skills leadership skills
problem solving skills adaptability stress management motivation techniques life skills.
UNIT III PRESENTATION SKILLS

Preparing slides using the computer structuring the content (parts of a presentation)- body
language answering questions individual presentation practice mini presentation (practice
sessions)
UNIT IV GROUP DISCUSSION SKILLS

Participating in group discussions understanding group dynamics brainstorming questioning
and clarifying GD strategies (expressing opinions, accepting or refusing others opinions, turn
taking) activities to improve GD skills viewing recorded GD mock GD.
58
UNIT V INTERVIEW SKILLS
Interview etiquettetechnical Interview/HR Interview/body language mock interview attending
job interviews Types of interviews- telephone/skype interview stress interview, one to
one/panel interview FAQs related to job interview.
TOTAL: 45 PERIODS
OUTCOMES:
Students will be able to make presentations and participate in group discussions with
confidence.
Students will be able to perform well in interviews.
They will have adequate writing skills.
REFERENCES:
1. Downes, Colm. Cambridge English for Job Hunting. CUP, 2008
2 Corneilssen, Joep. How to Prepare for Group Discussion and Interview. New Delhi:
Tata-McGraw-Hill, 2009.
3. Dabreo, Desmond A. Group Discussion and Team Building. Mumbai: Better Yourself
Books, 2004.
4. Ramesh, Gopalswamy, and Mahadevan Ramesh. The ACE of soft skills. New Delhi:
Pearson, 2010.
5. Gulati, Sarvesh. Corporate Soft skills. New Delhi: Rupa and Co. 2006.
6. Van Emden, Joan, and Lucinda Becker. Presentation Skills for Students. New York:
Palgrave Macmillan, 2004.
7. Sarawati, V. and Revathi Vishwanathan, Soft Skills for Career Communication Preesat
Publications, Chennai: 2011
EXTENSIVE READERS
1. Covey, Stephen R. The 7 Habits of Highly Effective People.New York: Free Press, 1989
2. Bagchi, Cubroto. The Professional. New Delhi: Penguin Books India, 2009.
WEB RESOURCES
1. www.humanresources.about.com
2. www.careerride.com
3. https://bemycareercoach.com/softskills
ME 7611 THERMAL ENGINEERING LABORATORY II L T P C

0 0 4 2
OBJECTIVES
To study the heat transfer characteristics of various heat transfer apparatus
To study the performance of refrigeration cycle / components.
1. Thermal conductivity measurement using guarded plate apparatus.
2. Thermal conductivity measurement of pipe insulation using lagged pipe apparatus.
3. Determination of heat transfer coefficient under natural convection from a vertical cylinder.
4. Determination of heat transfer coefficient under forced convection from a tube.
5. Determination of Thermal conductivity of composite wall.
6. Determination of Thermal conductivity of insulating powder.
7. Heat transfer from pin-fin apparatus (natural & forced convection modes)
8. Determination of Stefan Boltzmann constant.
9. Determination of emissivity of a grey surface.
10. Determination of Effectiveness of Parallel / counter flow heat exchanger.
11. Determination of COP of a refrigeration system
12. Performance test in a simple Air-Conditioning system
13. Performance test on a cooling tower
TOTAL:60 PERIODS
59
OUTCOMES:
Upon completion of this course the students can
Determine the heat transfer coefficient and performance of different heat transfer
equipments
Perform a load test on Refrigeration & Air- conditioning test rig to determine their
effectiveness.
ME 7355 POWER PLANT ENGINEERING L T P C

3 0 0 3
OBJECTIVES:
To understand the working of power plants and analyse their performance.
To learn the economics of power generation.
UNIT I HYDRO POWER PLANTS 9

Energy scenario Global and National. Essential elements and classification of hydro power
plants. Typical Layout and associated components. Selection of turbines. Pumped storage plants.
UNIT II COAL, OIL AND GAS TURBINE POWER PLANTS 9

Cycle analysis - Layout of modern coal based power plant. Super Critical Boilers - FBC Boilers.
Subsystems Water and Steam, Fuel and ash handling, Air and Gas, Draught system. Diesel and
Gas Turbine power plants- Layout and Functioning. Environmental impact and Control.
UNIT III NUCLEAR POWER PLANTS 9

Layout and subsystems. Fuels and Nuclear reactions. Boiling Water Reactor, Pressurized Water
Reactor, Fast Breeder Reactor, Gas Cooled and Liquid Metal Cooled Reactors working and
Comparison. Safety measures. Environmental aspects.
UNIT IV RENEWABLE ENERGY POWER PLANTS 9

Solar power plants Photovoltaic and Thermal. Wind power plants Vertical and Horizontal axes
Wind Turbines. Biomass power plants Gasification and combustion. Tidal and Ocean Thermal
Energy plants. Geothermal plants. Fuel cell Types. Hybrid power plants.
UNIT V ECONOMICS OF POWER GENERATION 9

Load and load duration curves. Electricity billing costing of electrical energy Tariff structures.
Economics of power plant Fixed and variable cost. Payback period. Net Present Value, Internal
Rate of Return. Emission calculation and carbon credit.
TOTAL:45 PERIODS
OUTCOMES:
Upon completion of this course the students will be able to:
Understand the working of different power plants
Arrive at cost of power generation, electricity billing and rate of return on power plant
investments
TEXT BOOKS:
1. P.K.Nag, Power Plant Engineering, Tata McGraw Hill, 2014.
2. Paul Breeze, Power Generation Technologies, Elsevier Ltd., 2014.
REFERENCES:
1. Black and Veatch, Power Plant Engineering, Indian edition, CBS Publishers and Distributors,
New Delhi, 1998.
2. M.M.El.Wakil, Power Plant Technology, Tata McGraw Hill, 2010.
3. K.Rajput, Power Plant Engineering, Laxmi Publications, 2005.
4. Janet Wood, Nuclear Power, The Institution of Engineering and Technology, 2007.
5. James Momoh, Smart Grids - Fundamentals of Design and analysis, Wiley Press, 2012.
60
ME 7701 COMPUTER INTEGRATED MANUFACTURING L T P C
3 0 0 3
OBJECTIVE:
To understand the application of computers in various aspects of Manufacturing viz.,
Design, Planning, Manufacturing cost, Layout & Material Handling system.
Various phases in Product Design and CAD, CAM, Concepts of CAD/CAM CIM concepts and
elements Types of production Manufacturing models and Metrics Mathematical models of
Production Performance Simple problems Basic Elements of an Automated system Levels of
Automation Lean Production and Just-In-Time Production.
UNIT II PRODUCTION PLANNING & CONTROL AND COMPUTERISED PROCESS 9

PLANNING
Process planning Computer Aided Process Planning (CAPP) Aggregate Production Planning
and Master Production Schedule Material Requirement Planning (MRP I) Simple Problems
Capacity Planning Shop Floor Control Inventory Control EOQ, WIP costs & Inventory
Holding Costs - Simple Problems Introduction to Manufacturing Resource Planning (MRP II) &
Enterprise Resource Planning (ERP).
UNIT III CELLULAR MANUFACTURING 9

Group Technology(GT), Part Families Parts Classification and coding Simple Problems in
OPITZ Part Coding system Production flow Analysis Cellular Manufacturing Composite part
concept Machine cell design and layout Quantitative analysis in Cellular Manufacturing Rank
Order Clustering Method - Arranging Machines in a GT cell Hollier Method Simple Problems.
UNIT IV FLEXIBLE MANUFACTURING SYSTEM (FMS) AND AUTOMATED 9

GUIDED VEHICLE SYSTEM (AGVS)
Types of Flexibility - FMS FMS Components FMS Application & Benefits FMS Planning and
Implementation Issues Quantitative analysis of Bottleneck Model on simple problems in FMS.
Automated Guided Vehicle System (AGVS) AGVS Application Vehicle Guidance technology
Vehicle Management & Safety.
UNIT V INDUSTRIAL ROBOTICS 9

Robot Anatomy and Related Attributes Classification - Control systems End Effectors
Sensors Applications Basics of Robot Part Programming Robot Accuracy and Repeatability
Simple Problems.
TOTAL: 45 PERIODS
OUTCOME:
Acquire the required capability to gradually convert Traditional Manufacturing environment
to Computer Integrated Manufacturing environment.
TEXT BOOK:
1. Mikell .P. Groover Automation, Production Systems and Computer Integrated Manufacturing,
Prentice Hall of India, 2009.
REFERENCES:
1. Kant Vajpayee S, Principles of Computer Integrated Manufacturing, Prentice Hall
India,2003.
2. Radhakrishnan P, Subramanyan S.and Raju V., CAD/CAM/CIM, 2nd Edition, New Age
International (P) Ltd, New Delhi, 2000.
3. Gideon Halevi and Roland Weill, Principles of Process Planning A Logical Approach
Chapman & Hall, London, 1995.
4. P Rao, N Tewari and T.K. Kundra, Computer Aided Manufacturing, Tata McGraw Hill
Publishing Company, 2000. .
61
ME 7751 FINITE ELEMENT ANALYSIS L T P C
3 0 0 3
OBJECTIVES:
To introduce the concepts of Mathematical Modeling and numerical solution of engineering
problems.
To appreciate the use of Finite Element Method to a range of engineering problems.
Historical Background Mathematical Modeling of field problems in Engineering Governing
Equations Discrete and continuous models Boundary, Initial and Eigen Value problems
Weighted Residual Methods Variational Formulation of Boundary Value Problems Ritz
Technique Basic concepts of the Finite Element Method.
UNIT II ONE-DIMENSIONAL PROBLEMS 9

One Dimensional Second Order Equations Discretization Element types- Linear and Higher
order Elements Derivation of Shape functions and Stiffness matrices and force vectors-
Assembly of Matrices - Solution of problems from solid mechanics including thermal stresses-heat
transfer. Natural frequencies of longitudinal vibration and mode shapes. Fourth Order Beam
Equation Transverse deflections and Transverse Natural frequencies of beams.
UNIT III TWO DIMENSIONAL SCALAR VARIABLE PROBLEMS 9

Second Order 2D Equations involving Scalar Variable Functions Variational formulation Finite
Element formulation Triangular elements and Quadrilateral elements- Shape functions and
element matrices and vectors. Application to Field Problems - Thermal problems Torsion of Non
circular shafts.
UNIT IV TWO DIMENSIONAL VECTOR VARIABLE PROBLEMS 9
Equations of elasticity Plane stress, plane strain and axisymmetric problems Constitutive
matrices and Strain displacement matrices Stiffness matrix Stress calculations - Plate and
shell elements.
UNIT V ISOPARAMETRIC FORMULATION AND ADVANCED TOPICS 9

Natural co-ordinate systems Isoparametric elements Shape functions for isoparametric
elements One and two dimensions Serendipity elements Numerical integration - Matrix
solution techniques Solutions Techniques to Dynamic problems Introduction to Analysis
Software- Introduction to Non Linearity.
TOTAL:45 PERIODS
OUTCOMES:
Understand the use of the FEM to solve problems in Mechanical Engineering.
Use the Finite Element Method to solve Structural, thermal and Eigen value problems.
TEXT BOOKS:
1. J.N.Reddy, An Introduction to the Finite Element Method, 3rd Edition, Tata McGrawHill,2005
2. Seshu, P, Text Book of Finite Element Analysis, Prentice-Hall of India Pvt. Ltd., NewDelhi,
2007.
REFERENCES:
1. Logan, D.L., A first course in Finite Element Method, Thomson Asia Pvt. Ltd., 2002.
2. Robert D. Cook, David S. Malkus, Michael E. Plesha, Robert J. Witt, Concepts and
Applications of Finite Element Analysis, 4th Edition, Wiley Student Edition, 2002.
3. Rao, S.S., The Finite Element Method in Engineering, 3rd Edition, Butter worth Heinemann,
2004.
4. Chandrupatla and Belagundu, Introduction to Finite Elements in Engineering, 3rd Edition,
Prentice Hall, 1990.
5. David Hutton, Fundamentals of Finite Element Analysis McGrawHill, 2005
6. Dhanaraj. R and Prabhakaran Nair. K, Finite Element Analysis, Oxford Publications, 2015.
62
ME 7711 CREATIVE AND INNOVATIVE PROJECT L T P C
0 0 4 2
OBJECTIVES:
The goal of this course is to help students to identify innovative projects that promotes
creativity to explore the variables that affect creativity and innovation.
By the end of the semester, the students should be familiar with current thinking in their
field, and able to apply the concepts to relevant research problems or practical
applications.
The goal of this course is to drive them to learn concepts, models, frameworks, and tools
that engineering graduates need in a world where creativity and innovation is fast
becoming a precondition for competitive advantage.
Each student will choose a frequently/commonly encountered workplace problem or
socially relevant problems that have been difficult for them to solve.
At the end of the semester, each or group of students have to submit a report for
evaluation.
TOTAL:60 PERIODS
OUTCOME:
Upon completion of this course, the students will be able to take up any challenging practical
problem and find solutions by formulating proper methodology.
ME 7712 SIMULATION AND ANALYSIS LABORATORY L T P C

0 0 4 2
OBJECTIVES:
To give exposure to software tools needed to analyze engineering problems.
To expose the students to different applications of simulation and analysis tools.
UNIT I SIMULATION 30
LIST OF EXPERIMENTS
1. MANUAL PART PROGRAMMING:
(i) Part Programming - CNC Machining Centre
a) Linear Cutting.
b) Circular cutting.
c) Cutter Radius Compensation.
d) Canned Cycle Operations.
(ii) Part Programming - CNC Turning Centre
a) Straight, Taper and Radius Turning.
b) Thread Cutting.
c) Rough and Finish Turning Cycle.
d) Drilling and Tapping Cycle.
2. COMPUTER AIDED PART PROGRAMMING
e) CL Data and Post process generation using CAM packages.
f) Application of CAPP in Machining and Turning Centre.
3. STUDY OF CNC EDM, CNC EDM WIRE-CUT AND RAPID PROTOTYPING.
UNIT II ANALYSES 30
LIST OF EXPERIMENTS
Use of any finite element analysis software for following problems:
1. Force and Stress analysis using link elements in Trusses, cables and bars.
2. Stress and deflection analysis in beams with different support conditions.
3. Stress analysis of flat plates and simple shells.
4. Stress analysis of axi symmetric components.
5. Thermal stress and heat transfer analysis of fins, plates and cylinders.
6. Vibration analysis of spring-mass systems.
63
7. Modal analysis of Beams.
8. Harmonic, transient and spectrum analysis of simple systems
TOTAL:60 PERIODS
OUTCOME:
Understand the use of analysis and simulation software to solve problems in Mechanical
Engineering.
ME 7761 MECHATRONICS LABORATORY L T P C

0 0 4 2
OBJECTIVES:
To develop codes for the microprocessor, microcontroller and PLC.
To gain knowledge about the various types of sensors and signal conditioning units.
To interface the I/O devices with microprocessor, microcontroller and PLC.
To understand the method of actuating and controlling the speed of electrical and
mechanical drives.
To understand image processing techniques and DAQ system.
1. Experimental study of basic Signal Conditioning Circuits.
2. Measurement of Displacement, Force and Temperature using Transducers.
3. Experiments on application of LDR, Optocoupler, Ultrasonic and Infrared sensors.
4. Modelling and Analysis of basic Hydraulic, Pneumatic and Electro-Pneumatic Circuits using
Simulation Software.
5. Actuation of Hydraulic, Pneumatic and Electro-Pneumatic circuits.
6. Application of PLC with Timers and Counters.
7. Solving basic Arithmetic Problems using 8085 Microprocessor and 8051 Microcontroller.
8. Automatic Temperature Control System.
9. Speed and Direction Control of DC drives by Microcontroller.
10. Speed Control of AC drives by Microcontroller.
11. Stepper Motor Actuation and Control.
12. Servo Motor Actuation and Control.
13. Actuation of Double-Acting Cylinder by Microcontroller and PLC.
14. Application of Image Processing System.
15. Data Acquisition System - Measurement and Analysis of Displacement, Force and
Temperature.
16. Modelling and Analysis of Robot using Simulation Software.
17. Control of Robotic Actuation by Microcontroller.
TOTAL:60 PERIODS
OUTCOME:
Have hands-on experience with sensors, actuators and controllers which are commonly
used in Mechatronics systems.
64
ME 7811 PROJECT WORK L T P C
0 0 20 10
OBJECTIVES:
To develop the ability to solve a specific problem right from its identification and literature
review till the successful solution of the same.
To train the students in preparing project reports and to face reviews and viva voce
examination.
A project topic must be selected by the students in consultation with their guides.
The aim of the project work is to deepen comprehension of principles by applying them to a
new problem which may be the design and fabrication of a device for a specific application,
a research project with a focus on an application needed by the industry/society, a
computer project, a management project or a design project.
The progress of the project is evaluated based on a minimum of three reviews.
The review committee may be constituted by the Head of the Department. A project report
is required at the end of the semester. The project work is evaluated jointly by external and
internal examiners constituted by the Head of the Department based on oral presentation
and the project report.
TOTAL: 300 PERIODS
OUTCOME:
Take up any challenging practical problems and find solution by formulating proper
methodology.
GE 7071 DISASTER MANAGEMENT L T P C

3 0 0 3
OBJECTIVES:
To provide students an exposure to disasters, their significance and types.
To ensure that students begin to understand the relationship between vulnerability,
disasters, disaster prevention and risk reduction
To gain a preliminary understanding of approaches of Disaster Risk Reduction (DRR)
To enhance awareness of institutional processes in the country and
To develop rudimentary ability to respond to their surroundings with potential
disaster response in areas where they live, with due sensitivity
UNIT I INTRODUCTION TO DISASTERS 9

Definition: Disaster, Hazard, Vulnerability, Resilience, Risks Disasters: Types of disasters
Earthquake, Landslide, Flood, Drought, Fire etc - Classification, Causes, Impacts including social,
economic, political, environmental, health, psychosocial, etc.- Differential impacts- in terms of
caste, class, gender, age, location, disability - Global trends in disasters: urban disasters,
pandemics, complex emergencies, Climate change- Dos and Donts during various types of
Disasters.
UNIT II APPROACHES TO DISASTER RISK REDUCTION (DRR) 9

Disaster cycle - Phases, Culture of safety, prevention, mitigation and preparedness community
based DRR, Structural- nonstructural measures, Roles and responsibilities of- community,
Panchayati Raj Institutions/Urban Local Bodies (PRIs/ULBs), States, Centre, and other stake-
holders- Institutional Processess and Framework at State and Central Level- State Disaster
Management Authority(SDMA) Early Warning System Advisories from Appropriate Agencies
.
UNIT III INTER-RELATIONSHIP BETWEEN DISASTERS AND DEVELOPMENT 9
Factors affecting Vulnerabilities, differential impacts, impact of Development projects such as
dams, embankments, changes in Land-use etc.- Climate Change Adaptation- IPCC Scenario and
65
Scenarios in the context of India - Relevance of indigenous knowledge, appropriate technology
and local resources
UNIT IV DISASTER RISK MANAGEMENT IN INDIA 9

Hazard and Vulnerability profile of India, Components of Disaster Relief: Water, Food, Sanitation,
Shelter, Health, Waste Management, Institutional arrangements (Mitigation, Response and
Preparedness, Disaster Management Act and Policy - Other related policies, plans, programmes
and legislation Role of GIS and Information Technology Components in Preparedness, Risk
Assessment, Response and Recovery Phases of Disaster Disaster Damage Assessment.
UNIT V DISASTER MANAGEMENT: APPLICATIONS AND CASE STUDIES AND FIELD

WORKS 9
Landslide Hazard Zonation: Case Studies, Earthquake Vulnerability Assessment of Buildings and
Infrastructure: Case Studies, Drought Assessment: Case Studies, Coastal Flooding: Storm Surge
Assessment, Floods: Fluvial and Pluvial Flooding: Case Studies; Forest Fire: Case Studies, Man
Made disasters: Case Studies, Space Based Inputs for Disaster Mitigation and Management and
field works related to disaster management.
TOTAL: 45 PERIODS
OUTCOMES:
The students will be able to
Differentiate the types of disasters, causes and their impact on environment and society
Assess vulnerability and various methods of risk reduction measures as well as
mitigation.
Draw the hazard and vulnerability profile of India, Scenarious in the Indian context,
Disaster damage assessment and management.
TEXT BOOKS:
1. Singhal J.P. Disaster Management, Laxmi Publications, 2010. ISBN-10: 9380386427 ISBN-
13:978-9380386423
2. Tushar Bhattacharya, Disaster Science and Management, McGraw Hill India Education Pvt.
3. Ltd., 2012. ISBN-10: 1259007367, ISBN-13: 978-1259007361]
4. Gupta Anil K, Sreeja S. Nair. Environmental Knowledge for Disaster Risk Management,
NIDM, New Delhi, 2011
5. Kapur Anu Vulnerable India: A Geographical Study of Disasters, IIAS and Sage Publishers,
New Delhi, 2010.
REFERENCES
1. Govt. of India: Disaster Management Act , Government of India, New Delhi, 2005
2. Government of India, National Disaster Management Policy,2009.
GE7074 HUMAN RIGHTS L T P C

3 0 0 3
OBJECTIVE :
To sensitize the Engineering students to various aspects of Human Rights.
UNIT I 9
Human Rights Meaning, origin and Development. Notion and classification of Rights Natural,
Moral and Legal Rights. Civil and Political Rights, Economic, Social and Cultural Rights; collective
/ Solidarity Rights.
66
UNIT II 9
Evolution of the concept of Human Rights Magana carta Geneva convention of 1864. Universal
Declaration of Human Rights, 1948. Theories of Human Rights.
UNIT III 9
Theories and perspectives of UN Laws UN Agencies to monitor and compliance.
UNIT IV 9
Human Rights in India Constitutional Provisions / Guarantees.
UNIT V 9
Human Rights of Disadvantaged People Women, Children, Displaced persons and Disabled
persons, including Aged and HIV Infected People. Implementation of Human Rights National and
State Human Rights Commission Judiciary Role of NGOs, Media, Educational Institutions,
Social Movements.
TOTAL : 45 PERIODS
OUTCOME :
Engineering students will acquire the basic knowledge of human rights.
REFERENCES:
1. Kapoor S.K., Human Rights under International law and Indian Laws, Central Law
Agency,Allahabad, 2014.
2. Chandra U., Human Rights, Allahabad Law Agency, Allahabad, 2014.
3. Upendra Baxi, The Future of Human Rights, Oxford University Press, New Delhi.
IE7451 PRODUCTION AND OPERATIONS MANAGEMENT L T P C

3 0 0 3
AIM:
To impart knowledge in the areas of production and Operations management applicable to
various types of manufacturing and service systems.
OBJECTIVES
To understand and appreciate the concept of Production and Operations Management in
creating and enhancing a firms competitive advantages.
To understand the concept and contribution of various constituents of Production and
Operations Management (both manufacturing and service)
To understand the interdependence of the operations function with the other key functional
areas of a firm
To apply analytical skills and problem-solving tools to the analysis of the operations
problems
Overview of Production System, Objectives of Operation Management, Scope of Operations
Management, Operations Management Frame work, Relationship of operations with other
Functional areas, Manufacturing Vs Service sector, Operations Decision making, Production
Design Process and Process choices
UNIT II FORECASTING 9
Need, Determinants of Demand, Demand Patterns, Measures of forecast error, Qualitative
Forecasting Methods-Delphi techniques. Market Research, Nominal Group Technique Quantitative
Forecasting methods Moving Average Methods, Exponential Smoothing Methods, Regression
67
methods, Monitoring and Control of Forecasts, Requirements and Selection of Good forecasting
methods.
UNIT III AGGREGATE PLANNING AND MATERIAL REQUIREMENT PLANNING 9

Role of aggregate Product planning, Managerial inputs to Aggregate planning, Pure and Mixed
strategies, Mathematical Models for Aggregate planning Transportation Method, Linear
programming Formulation, Linear Decision Rues, Master Production Schedule(MPS), Procedure
for developing MPS, MRP, Lot sizing methods of MRP, MRP Implementation issues.
UNIT IV CAPACITY MANAGEMENT 9

Measures of capacity, Factors affecting capacity, Capacity planning, Systematic approach to
capacity planning, Long-term and short-term capacity decisions, Tools for capacity planning,
Capacity Requirement planning- Business process outsourcing-, MRP II, Introduction to ERP,
Introduction TOC.
UNIT V PRODUCTION ACTIVITY CONTROL AND LEAN MANUFACTURING 9

Objectives and Activities of Production Activity Control - Introduction to Scheduling in different
types of Production Systems.
Lean Manufacturing-Principles Activities - Tools and techniques - Case studies.
TOTAL: 45 PERIODS
OUTCOMES
To understand the various parts of the operations and production management
processes and their interaction with other business functions
To develop the ability to identify operational methodologies to assess and improve
an organizations performance
To develop essential skills of modelling, managing and optimizing operations
decisions in manufacturing and service organizations.
Utilize a variety of quantitative and qualitative methods and tools used in
managing and improving operations decisions.
REFERENCES:
1. Panneerselvam. R, Production and operations Management,PHI,2012
2. Seetharama L.Narasimhan, Dennis W.McLeavey, Peter J.Billington, Production
Planning And Inventory Control , PHI, 2009.
3. Norman Gaither, Greg Frazier, Operations Management, Thomson Learning, 2002.
4. Lee J.Krajewski, Larry P.Ritzman, Operations Management Strategy and Analysis, PHI,
2003.
MA 7352 APPLIED STATISTICS L T P C

4 0 0 4
OBJECTIVE:
The students will have a fundamental knowledge of the concepts of statistical method
analyse and apply the tools in solving management problems.
UNIT I TESTS OF SIGNIFICANCE 12

Sampling distributions Central limit theorem-Tests for single mean, proportion and difference of
means, proportions (large and small samples) - Tests for single variance and equality of
variances- - test for goodness of fit - Independence of attributes.
2
UNIT II NON - PARAMETRIC TESTS 12

Advantages and drawbacks over parametric methods Sign test - Median test Mann-Whitney
Wilcoxon U-test Wald-Wolfowitz run test.
68
UNIT III DESIGN OF EXPERIMENTS 12
2
Completely randomized design - Randomized block design - Latin square design - 2 factorial
design - Taguchis robust parameter design.
UNIT IV STATISTICAL QUALITY CONTROL 12

Control charts for variables - Control charts for attributes - Tolerance limits - Acceptance sampling
by attributes.
UNIT V TIME SERIES 12

Components of time series - Analysis of time series - Measurement of trend - Measurement of
seasonal fluctuations.
TOTAL:60 PERIODS
OUTCOME:
The students can independently participate in the processes of analysis, planning,
formulating strategies of development, decision-making, governing and management, and
independent making of tactical and strategic decisions related to the statistics.
TEXT BOOKS:
1. Walpole R.E., Myers R.H., Myers S.L. and Keying Ye, Probability and Statistics for Engineers
and Scientists, Pearson Education, Asia, 8th Edition 2007.
2. Gupta S.C. and Kapoor V.K., Fundamentals of Applied Statistics, Sultan Chand and Sons,
New Delhi, 2nd Edition, Reprint, 2002.
REFERENCES:
1. Johnson R.A., Miller and Freunds Probability and Statistics for Engineers,
PHI Learning Pvt. Ltd., New Delhi, 8th Edition, 2011.
2. Devore, J.L., Probability and Statistics for Engineering and the Sciences, Thomson
Brooks/Cole, International Student Edition, New Delhi, 7th Edition, 2008.
3. Milton, J. S. and Arnold, J.C., Introduction to Probability and Statistics, Tata McGraw Hill,
New Delhi, 4th Edition, 3rd Reprint, 2008.
ME 7001 ADVANCED INTERNAL COMBUSTION ENGINEERING L T P C

3 0 0 3
OBJECTIVES:
To understand the principles of operation of different IC Engines, combustion process and
fuel injection systems.
To provide knowledge on pollutant formation and control, suitability of alternate fuels, and
recent technological advances.
UNIT I SPARK IGNITION ENGINES 9

Mixture requirements Fuel injection systems Monopoint, Multipoint & Direct injection -Stages of
combustion Normal and Abnormal combustion, Spark Knock, Factors affecting knock,
Combustion chambers.
UNIT II COMPRESSION IGNITION ENGINES 9

Diesel Fuel Injection Systems - Stages of combustion Knocking Factors affecting knock
Direct and Indirect injection systems Combustion chambers Fuel Spray behaviour Spray
structure and spray penetration Air motion - Introduction to Turbo charging.
UNIT III POLLUTANT FORMATION AND CONTROL 9

Pollutant Sources Formation of Carbon Monoxide, Unburnt hydrocarbon, Oxides of Nitrogen,
Smoke and Particulate matter Methods of controlling Emissions Catalytic converters,
Selective Catalytic Reduction and Particulate Traps Methods of measurement Emission norms
69
and Driving cycles.
UNIT IV ALTERNATIVE FUELS 9

Alcohol, Hydrogen, Compressed Natural Gas, Liquefied Petroleum Gas and Bio Diesel -
Properties, Suitability, Merits and Demerits - Engine Modifications.
UNIT V RECENT TRENDS 9

Air assisted Combustion, Homogeneous charge compression ignition engines Variable
Geometry turbochargers Common Rail Direct Injection Systems - Hybrid Electric Vehicles NOx
Adsorbers - Onboard Diagnostics.
TOTAL:45 PERIODS
OUTCOMES:
Upon completion of this course, the students will be able to
Understand the combustion process, and the fuel injection techniques adopted in modern
day IC engines
Adopt potential alternative fuel systems and exposed to recent developments in engine
technology.
TEXT BOOKS:
1. V. Ganesan, Internal Combustion Engines, V Edition, Tata McGraw Hill, 2012.
2. K.K. Ramalingam, Internal Combustion Engine Fundamentals, Scitech Publications, II Ed.,
2011.
REFERENCES:
1. R.B. Mathur and R.P. Sharma, Internal Combustion Engines, Dhanpat Rai & Sons 2007.
2. B.P. Pundir, IC Engines Combustion & Emission, Narosa Publishing House, 2014.
3. Duffy Smith, Auto Fuel Systems, The Good Heart Wilcox Company, Inc., 2003.
ME 7002 ADVANCED METROLOGY L T P C

3 0 0 3
OBJECTIVE:
To give an understanding of the advancements in mechanical measurements and their
applications in manufacturing industries to optimize manufacturing processes.
UNIT I FUNDAMENTALS OF METROLOGY 9

Basic metrological concepts, Quality of measurements errors, Uncertainty, Basic to advanced
metrology evolution, Regression analysis, Design of experiments.
UNIT II OPTICAL DIMENSIONAL METROLOGY 9

Optical Metrology Overview, Machine Vision for Metrology, Multi-sensor coordinate metrology,
Laser Tracking Systems, Laser scanners, Displacement Measuring Interferometry, Phase-Shifting
Systems and Phase-Shifting Analysis, Moir Metrology, Computed Tomography.
UNIT III ADVANCES IN SURFACE METROLOGY - 2D, 3D 9

Surface Geometry and Its Importance in Function, Surfaces and Manufacture, Filtering
Gaussian, 2RC, Advanced Filters, Surface finish parameters Amplitude, Spacing, Hybrid, Shape,
Autocorrelation, Power Spectral Density, Bearing Area.
3D areal and parametric measurement, Need for 3D surface topography measurement, Stylus
instruments, Optical Instruments Chromatic confocal Microscopy, Interferometry, Non-optical
Scanning Microscopy Scanning electron Microscopes, Scanning probe microscopes,
Parameters for characterizing 3D surface topography.
70
UNIT IV NANOMETROLOGY 9
Precision to Nanometrology, Optical Micro-Metrology of Small Objects - White-Light Interference
3D Microscopes, Focus-Based Optical Metrology- Fringe projection method, Measurement of
Typical Nanofeatures, Measuring Length to Nanoscale with Interferometers and Other Devices,
Nano Geometry in Macro Situations.
UNIT V METROLOGY IN MANUFACTURING 9

Case studies relating to various manufacturing sectors - Automobile, space, nuclear, Tool wear;
Metrology in manufacturing research, Role of Metrology in Industry 4.0.
TOTAL:45 PERIODS
OUTCOME:
Make logical, rational and economical choice of measuring equipment / method to analyse
and improve manufacturing processes.
TEXT BOOKS:
1. Kevin Harding, Handbook of Optical Dimensional Metrology, Series: Series in Optics and
Optoelectronics, Taylor & Francis, 2013.
2. David J. Whitehouse, Handbook of Surface and Nanometrology, Second Edition, CRC Press,
2010.
REFERENCES:
1. Toru Yoshizawa, Handbook of Optical Metrology: Principles and Applications, CRC Press,
2009.
3. S. P. Venkateshan, Mechanical Measurements, Second edition, John Wiley & Sons, 2015.
4. Balasubramanian Muralikrishnan, Jayaraman Raja, Computational Surface and Roundness
Metrology, Springer-Verlag London Ltd., 2009.
5. Ken J Stout, Liam Blunt, Three Dimensional Surface Topography, Second edition, Penton
press, 2000..
ME 7003 CASTING AND WELDING PROCESSES L T P C

3 0 0 3
OBJECTIVE:
To impart knowledge on Design of Gating system for Castings, Foundry Practice of
Ferrous, Non Ferrous alloys, Foundry Mechanisation, Welding Processes and Welding
Metallurgy.
UNIT I DESIGN OF GATING SYSTEM 9

Gating system design - pouring time Choke Area Sprue Other gating elements Riser
design - Caines Modulus Naval Research Laboratory method feeding distances Chills
feeding Aids Design of Castings.
UNIT II FERROUS AND NON FERROUS CASTINGS 9

Steel Casting The family of cast iron melting of steels and cast irons Grey iron foundry
practice Ductile iron Malleable Iron casting design Aluminium, Magnesium, Copper, Zinc. ,
Duplex Stainless Steel and Titanium alloys foundry practice.
UNIT III FOUNDRY MECHANISATION 9

Mechanical equipments in foundry plant site location, layout Plant Engineering Maintenance
Services Practical aspects.
71
UNIT IV WELDING PROCESS AND TECHNOLOGY 9
Friction Welding Process effect of speed and pressure explosive welding plasma arc welding
Electron beam welding High frequency induction welding - Laser beam welding.
UNIT V WELDING METALLURGY 9

Weld thermal cycles Heat Affected Zone (HAZ) Weldability of steels Cast Iron Stainless
steel, aluminium Copper and Titanium alloys Hydrogen embrittlement Pro and post weld heat
Treatments weld defects Testing of Welds.
TOTAL:45 PERIODS
OUTCOMES:
Upon completion of this course, the students will be able to :
Design gating system for castings, understand the foundry practices of ferrous and non ferrous
metals.
Understand the various aspects of foundry mechanization, welding metallurgy and certain
welding processes.
TEXT BOOK:
1. P.N.Rao, Manufacturing Technology, Tata McGraw Hill, 2008.
REFERENCES:
1. Heine, Loper and Rosenthal, Principles of Metal Casting, Tata McGraw Hill, 2001.
2. A.K.Chakrabarti, Casting Technology and Cast Alloys, Prentice Hall Of India Ltd, 2005.
3. T.V.Rama Rao, Metal casting Principles and Practice, New Age International, 2010.
4. R.S Parmar, Welding Engineering and Technology, Khanna Publishers, 2002.
ME 7004 COMPOSITE MATERIALS AND MECHANICS L T P C

3 0 0 3
OBJECTIVES:
To understand:
The fundamentals of composite material strength and its mechanical behavior
Fibre reinforced Laminate design for different combinations of plies with different
orientations of the fibre.
Thermo-mechanical behavior and study of residual stresses in Laminates during
processing.
Implementation of Classical Laminate Theory (CLT) and analysis for residual stresses in an
isotropic layered structure such as electronic chips.
UNIT I INTRODUCTION TO COMPOSITE MATERIALS 9

Definition-Matrix materials-polymers-metals-ceramics - Reinforcements: Particles, whiskers,
inorganic fibers, metal filaments- ceramic fibers- fiber fabrication- natural composite wood, Jute -
Advantages and drawbacks of composites over monolithic materials. Mechanical properties and
applications of composites, Particulate-Reinforced composite Materials, Dispersion-Strengthened
composite, Fiber-reinforced composites Rule of mixtures-Characteristics of fiber-Reinforced
composites, Manufacturing fiber and composites,
UNIT II MANUFACTURING OF COMPOSITES 9

Manufacturing of Polymer Matrix Composites (PMCs)-handlay-up, spray technique, filament
winding, Pultrusion, Resin Transfer Moulding (RTM)-, bag moulding, injection moulding, Sandwich
Mould Composites (SMC) - Manufacturing of Metal Matrix Composites (MMCs) - Solid state, liquid
state, vapour state processing, Manufacturing of Ceramic Matrix Composites (CMCs) hot
pressing-reaction bonding process-infiltration technique, direct oxidation- interfaces.
72
UNIT III INTRODUCTION, LAMINA CONSTITUTIVE EQUATIONS 9
Lamina Constitutive Equations: Lamina Assumptions Macroscopic Viewpoint. Generalized
Hookes Law. Reduction to Homogeneous Orthotropic Lamina Isotropic limit case, Orthotropic
Stiffness matrix (Qij), Definition of stress and Moment Resultants. Strain Displacement relations.
Basic Assumptions of Laminated anisotropic plates. Laminate Constitutive Equations Coupling
Interactions, Balanced Laminates, Symmetric Laminates, Angle Ply Laminates, Cross Ply
Laminates. Laminate Structural Moduli. Evaluation of Lamina Properties from Laminate Tests.
Quasi-Isotropic Laminates. Determination of Lamina stresses within Laminates.
UNIT IV LAMINA STRENGTH ANALYSIS AND ANALYSIS OF LAMINATED FLAT 9

PLATES
Introduction - Maximum Stress and Strain Criteria. von-Mises Yield criterion forIsotropic Materials.
Generalized Hills Criterion for Anisotropic materials. Tsai-Hills Failure Criterion for Composites.
Tensor Polynomial (Tsai-Wu) Failure criterion. Prediction of laminate Failure Equilibrium Equations
of Motion. Energy Formulations. Static Bending Analysis. Buckling Analysis. Free Vibrations
Natural Frequencies.
UNIT V THERMAL ANALYSIS 9

Assumption of Constant Co-efficient of Thermal Expansion (C.T.E.) - Modification of Hookes Law.
Modification of Laminate Constitutive Equations. Orthotropic Lamina C.T.Es. C.T.Es for special
Laminate Configurations Unidirectional, Off-axis, Symmetric Balanced Laminates, Zero C.T.E
laminates, Thermally Quasi-Isotropic Laminates.
TOTAL:45 PERIODS
OUTCOME:
The students will be able to understand the mechanics and design related to layered
components such as fiber reinforced polymer composites, isotropic layered structures
(example electronic chips) etc and its manufacturing methodologies.
TEXT BOOKS:
1. Gibson, R.F., Principles of Composite Material Mechanics, McGraw-Hill, 1994, Second
Edition - CRC press in progress.
2. Hyer, M.W., Stress Analysis of Fiber Reinforced Composite Materials, McGraw-Hill, 1998.
REFERENCES:
1. Issac M. Daniel and Ori Ishai, Engineering Mechanics of Composite Materials, Oxford
University Press-2006, First Indian Edition 2007.
2. Mallick, P.K., Fiber Reinforced Composites: Materials, Manufacturing and Design, Maneel
Dekker Inc, 1993.
3. Halpin, J.C., Primer on Composite Materials, Analysis, Techomic Publishing Co., 1984.
4. Agarwal, B.D., and Broutman L.J., Analysis and Performance of Fiber Composites, John
Wiley and Sons, New York, 1990.
5. Mallick, P.K. and Newman, S., (edition), Composite Materials Technology: Processes and
Properties, Hansen Publisher, Munish, 1990.
6. Madhujit Mukhopadhyay, Mechanics of Composite Materials and Structures, University Press
(India) Pvt. Ltd., Hyderabad, 2004 (Reprinted 2008).
7. Chung, Deborah D.L., Composite Materials: Science and Applications, Ane Books Pvt.
Ltd./Springer, New Delhi, 1st Indian Reprint, 2009.
73
ME 7006 ENGINEERING MANAGEMENT L T P C
3 0 0 3
OBJECTIVES:
To provide a clear understanding of basic management principles that leads to corporate
building.
To develop modern concepts of Industrial Management.
Technology Management - Definition Functions Evolution of Modern Management Scientific
Management Development of Management Thought. Approaches to the study of Management,
Forms of Organization Individual Ownership Partnership Joint Stock Companies Co-
operative Enterprises Public Sector Undertakings, Corporate Frame Work Share Holders
Board of Directors Committees Chief Executive Line and Functional Managers, Constraints
Environmental Financial Legal Trade Union.
UNIT II FUNCTIONS OF MANAGEMENT 9

Planning Nature and Purpose Objectives Strategies Policies and Planning Premises
Decision Making Organizing Nature and Process Premises Departmentalization Line and
staff Decentralization Organizational culture, Staffing - selection and training Placement
Performance appraisal Career Strategy Organizational Development. Leading Managing
human factor Leadership Communication, Controlling - Process of Controlling Controlling
techniques, productivity and operations management Preventive control, Industrial Safety.
UNIT III ORGANIZATIONAL BEHAVIOUR 9

Definition Organization Managerial Role and functions Organizational approaches, Individual
behaviour causes Environmental Effect Behaviour and Performance, Perception
Organizational Implications. Personality Contributing factors Dimension Need Theories
Process Theories Job Satisfaction, Learning and Behaviour Learning Curves, Work Design
and approaches.
UNIT IV GROUP DYNAMICS 9

Group Behaviour Groups Contributing factors Group Norms, Communication Process
Barriers to communication Effective communication, leadership formal and informal
characteristics Managerial Grid Leadership styles Group Decision Making Leadership Role
in Group Decision, Group Conflicts Types Causes Conflict Resolution Inter group relations
and conflict, Organization centralization and decentralization Formal and informal
Organizational Structures Organizational Change and Development Change Process
Resistance to Change Culture and Ethics.
UNIT V MODERN CONCEPTS 9

Management by Objectives (MBO) Management by Exception (MBE) SWOT Analysis
Decisions Support System (DSS) Management Games Business Process Re-engineering
(BPR) Enterprises Resource Planning (ERP) Supply Chain Management (SCM) Activity
Based Management (ABM) Principles and Steps Advantages and disadvantages
TOTAL : 45 PERIODS
TEXT BOOK:
1. Herald Koontz and Heinz Weihrich, Essentials of Management, McGraw Hill Publishing
Company, Singapore International Edition, 1980.
REFERENCES:
1. S.Chandran, Organizational Behaviours, Vikas Publishing House Pvt. Ltd., 1994
2. Ties, AF, Stoner and R.Edward Freeman, Management Prentice Hall of India Pvt. Ltd., New
Delhi, 110011, 1992.
3. Joseph J, Massie, Essentials of Management Prentice Hall of India Pvt. Ltd., 1985.
4. M. Govindarajan and S. Natarajan, Principles of Management, Prentice Hall of India Pvt. Ltd.,
New Delhi, 2007.
74
ME 7007 GAS DYNAMICS AND SPACE PROPULSION L T P C
3 0 0 3
OBJECTIVES:
To understand the fundamentals of compressible flow in constant and variable area ducts.
To understand the behaviour of shock waves and its effect on flow.
To gain basic knowledge about Jet and Rocket propulsion.
UNIT I BASIC CONCEPTS AND ISENTROPIC FLOWS 9

Energy and momentum equations of compressible fluid flows, Concepts of compressible flow
Mach waves and Mach cone. Flow regimes, effect of Mach number on compressibility. Stagnation,
static, critical properties and their interrelationship. Isentropic flow and its relations. Isentropic flow
through variable area ducts nozzles and diffusers. Use of Gas tables.
UNIT II FLOW THROUGH DUCTS 9

Flows through constant area ducts with heat transfer (Rayleigh flow) and Friction (Fanno flow)
variation of flow properties. Choking concept, Isothermal flow with friction. Use of Gas tables.
UNIT III NORMAL AND OBLIQUE SHOCKS 9

Governing equations - Rankine-Hugoniot Relation. Variation of flow parameters across the normal
and oblique shocks. Prandtl Meyer expansion and relation. Use of Gas tables.
UNIT IV JET PROPULSION 9

Theory of jet propulsion thrust equation Performance parameters - thrust, power and
efficiency. Operation, cycle analysis and performance of ram jet, turbojet, turbofan, turbo prop and
pulse jet engines.
UNIT V SPACE PROPULSION 9

Types of rocket engines and propellants. Characteristic velocity thrust equation. Theory of single
and multistage rocket propulsion. Liquid fuel feeding systems. Solid propellant geometries. Orbital
and escape velocity. Rocket engine performance parameters and problems.
TOTAL:45 PERIODS
OUTCOME:
Apply the principles of gas dynamics in Jet and Space Propulsion.
TEXT BOOKS:
1. Anderson, J.D., Modern Compressible flow, 3rd Edition, McGraw Hill, 2003.
2. Yahya, S.M., Fundamentals of Compressible Flow with Aircraft and Rocket propulsion, New
Age International (P) Limited, 4th Edition, 2012.
REFERENCES:
1. Zucker, R.D., and Biblarz, O., Fundamentals of Gas Dynamics, 2nd edition, Wiley, 2011.
2. Sutton, G.P. Rocket Propulsion Elements, John Wiley, 8th edition 2010, New York.
3. Rathakrishnan, E., Gas Dynamics, Prentice Hall of India, 2006.
4. Shapiro, A.H., The Dynamics and Thermodynamics of Compressible Fluid Flow, Vol. 1, John
Wiley, 1953.
5. Balachandran, P., Fundamentals of Compressible Fluid Dynamics, Prentice Hall of India,
2007
6. Hill and Peterson, Mechanics and Thermodynamics of Propulsion, Addison Wesley, 1965.
7. Zucrow, N.J., Aircraft and Missile Propulsion, Vol.1 & II, John Wiley, 1975.
75
ME 7008 MACHINE VISION L T P C
3 0 0 3
OBJECTIVES:
To impart knowledge on the Physics behind Digital Image Processing.
To familiarize with the Methods of Image Acquisition.
To gain knowledge about Processing and Analyzing the Captured Image.
To have an idea about Machine Vision Applications.
Human Vision Machine vision and Computer Vision Benefits of Machine Vision Block
Diagram and Function of Machine Vision System Implementation of Industrial Machine Vision
System Physics of Light Interactions of Light Refraction at a Spherical Surface Thin Lens
Equation.
UNIT II IMAGE ACQUISITION 9

Scene Constraints Lighting Parameters Lighting Sources, Selection Lighting Techniques
Types and Selection Machine Vision Lenses and Optical Filters, Specifications and Selection
Imaging Sensors CCD and CMOS, Specifications Interface Architectures Analog and Digital
Cameras Digital Camera Interfaces Camera Computer Interfaces, Specifications and Selection
Geometrical Image Formation Models Camera Calibration.
UNIT III IMAGE PROCESSING 9

Machine Vision Software Fundamentals of Digital Image Image Acquisition Modes Image
Processing in Spatial and Frequency Domain Point Operation, Thresholding, Grayscale
Stretching Neighborhood Operations, Image Smoothing and Sharpening Edge Detection
Binary Morphology Color image processing.
UNIT IV IMAGE ANALYSIS 9

Feature Extraction Region Features, Shape and Size Features Texture Analysis Template
Matching and Classification 3D Machine Vision Techniques Decision Making.
UNIT V MACHINE VISION APPLICATIONS 9

Machine Vision Applications in Manufacturing, Electronics, Printing, Pharmaceutical, Textile,
Applications in Non-Visible Spectrum, Metrology, Vision Guided Robotics Field and Service
Applications Agricultural, and Bio Medical Field, Augmented Reality, Surveillance, Bio-Metrics.
TOTAL:45 PERIODS
OUTCOME:
Apply Digital Image Processing Techniques for Machine Vision applications.
TEXT BOOKS:
1. Alexandaer Hornberg, Hand Book of Machine Vision, Wiley-VCH, 2006.
2. Davies E.R., Machine Vision Theory, Algorithms and Practicalities, Elsevier, 2005.
REFERENCES:
1. Nello Zuech, Understanding and Applying Machine Vision, Marcel Decker, 2000.
2. Bruce Batchelor and Frederick Waltz, Intelligent Machine Vision Techniques,
Implementations and Applications, Springer-Verlag, 2001.
3. Rafael C. Gonzales, Richard. E. Woods and Steven L. Eddins, Digital Image Processing
Using MATLAB, McGraw Hill Education, 2014.
4. Milan Sonka, Vaclav Hlavac and Roger Boyle, Image Processing, Analysis, and Machine
Vision, Cengage Learning, 2014.
5. Malay K. Pakhira, Digital Image Processing and Pattern Recognition, PHI Learning, 2011.
6. Chanda B. and Dutta Majumder D., Digital Image Processing and Analysis, PHI Learning,
2011.
76
ME 7009 MEASUREMENT AND CONTROLS L T P C
3 0 0 3
OBJECTIVES:
To students will understand the measurement and control systems which are essential
components of manufacturing systems.
To understand the principle and use of sensors for measurement of different parameters.
To understand the concept of feedback control systems and their applications.
UNIT I MEASUREMENTS 9
General concepts Units and standards Measuring instruments sensitivity, readability, range
accuracy, precision static and dynamic response repeatability hysteresis systematic and
random errors correction calibration and Uncertainty.
UNIT II INSTRUMENTS 9
Transducer, Modifying (intermediate) and Terminal stages Mechanical and electrical transducers
preamplifiers charge amplifiers filters attenuators D Arsonval CRO Oscillographs
records microprocessor based data logging, processing and output.
UNIT III PARAMETERS FOR MEASUREMENT 9

Dimension, displacement velocity, acceleration, impact Force, torque, power strain-pressure
humidity- temperature flow-Time, frequency and phase angle noise and sound level. Radio
tracer techniques flow visualization.
UNIT IV AUTOMATIC CONTROL SYSTEMS 9

Basic elements feedback principle implication of measurements Error detectors final
actuating elements Two position, multi-position, floating, proportional controls relays servo
amplifiers servo motors mechanical, Electrical, magnetic, electronic, hydraulic, pneumatic
systems.
UNIT V APPLICATION OF CONTROL SYSTEMS 9

Governing of speed, kinetic and process control pressure, temperature, fluid level, flow-thrust
and flight control photo electric controls.
TOTAL:45 PERIODS
OUTCOME:
Appreciate the principles of measurements leading to different measuring instruments and
control systems.
TEXT BOOKS:
1. S.P.Venkateshan ,Mechanical Measurements , Ane Books,India ,2014
2. I.J.Nagrath and M.Gopal, Control Systems Engineering, John wiley& Sons, 2ndEd., Ch.1-4,
1982.
REFERENCES:
1. J.P.Holman and N.J.Gajda Jr., Experimental Methods for Engineers, Mc Graw Hill Int.
Edition, 5th Ed., 1989.
2. E.O.Doeblin, Measurement Systems, Application and Design, Mc Graw Hill Int. Edition, 4th
Ed., 1990.
3. T.G.Beckwith and N.L.Buck, Mechanical Measurements, Addision Wesley Pub, Co., 1969.
77
ME 7010 MECHANICAL VIBRATION AND NOISE CONTROL L T P C
3 0 0 3
OBJECTIVES:
To understand the sources of vibration and noise in various systems.
To apply the various control techniques to reduce the vibration and noise and improve the
life of the components.
UNIT I BASICS OF VIBRATION 9

Introduction, classification of vibration: free and forced vibration, undamped and damped vibration,
linear and non linear vibration, response of damped and undamped systems under harmonic
force, analysis of single degree and two degree of freedom systems, torsional vibration,
determination of natural frequencies.
UNIT II BASICS OF NOISE 9

Introduction, amplitude, frequency, wavelength and sound pressure level, addition, subtraction and
averaging decibel levels, noise dose level, legislation, measurement and analysis of noise,
measurement environment, equipment, frequency analysis, tracking analysis, sound quality
analysis.
UNIT III AUTOMOTIVE NOISE SOURCES 9

Noise - Characteristics of engines, engine overall noise levels, assessment of combustion noise,
assessment of mechanical noise, engine radiated noise, intake and exhaust noise, engine
necessary contributed noise, transmission noise, aerodynamic noise, tyre noise, brake noise.
UNIT IV TWO DIMENSIONAL VECTOR VARIABLE PROBLEMS 9

Vibration isolation, tuned absorbers, un-tuned viscous dampers, damping treatments, dynamic
forces generated by IC engines, engine isolation, crank shaft damping, modal analysis of the mass
elastic model shock absorbers.
UNIT V SOURCES OF NOISE AND ITS CONTROL 9

Methods for control of engine noise, combustion noise, mechanical noise, predictive analysis,
palliative treatments and enclosures, automotive noise control principles, sound in enclosures,
sound energy absorption, sound transmission through barriers
TOTAL:45 PERIODS
OUTCOME:
Appreciate the need and its relevance for vibration and noise studies
Gain knowledge on measurement of vibration and noise levels in machineries and its
components.
Expose themselves to various control measures of both vibration and noise in different
industrial applications.
TEXT BOOKS:
1. Singiresu S.Rao - Mechanical Vibrations, 5th Edition, Pearson Education, 2010
2. Grover. G.T., Mechanical Vibrations, Nem Chand and Bros., 2009.
REFERENCES:
1. Benson H. Tongue, Principles of Vibrations, 2nd Edition, Oxford University, 2007.
2. David Bies and Colin Hansen, Engineering Noise Control Theory and Practice, 4th Edition
CRC Press; 4 edition (24 June 2009).
3. William T. Thomson, Marie Dillon Dahleh, Chandramouli Padmanabhan, Theory of Vibration
with Application, 5th edition Pearson Education, 2011.
4. Bernard Challen and Rodica Baranescu - Diesel Engine Reference Book Second Edition -
Butterworth-Heinemann Ltd; 2 edition May 1999.
5. Julian Happian-Smith - An Introduction to Modern Vehicle Design- Butterworth- Heinemann,
ISBN 0750-5044-3 2004.
6. Rao, J.S and Gupta, K., Introductory course on Theory and Practice of Mechanical Vibration,
78
Reprint, New Age International Publications, 2014.
7. A.A. Shabana, Theory of vibrations An introduction, 3rd Edition, Springer, 2010.
8. BalakumarBalachandran and Edward B. Magrab, Fundamentals of Vibrations, 1st Editon,
Cengage Learning, 2009.
9. John Fenton, Handbook of Automotive body Construction and Design Analysis
Professional Engineering Publishing, ISBN 1-86058-073- 1998.
ME 7011 MEMS AND MICROSYSTEMS L T P C

3 0 0 3
OBJECTIVES:
To understand the basic engineering concepts of MEMS.
To gain knowledge about the various Micromanufacturing Techniques.
To comprehend the working principle of Microsensors and Actuators.
To realize the concepts of Microfluidics and the applications of MEMS.
UNIT I BASIC ENGINEERING FOR MEMS 9

History of MEMS Development, Multidisciplinary Nature of Microsystems, Energy Domains,
Scalling Laws in Miniaturaization, Essential Electrical and Mechanical Concepts in MEMS,
Materials for MEMS and Microsystems.
UNIT II MICROMANUFACTURING TECHNIQUES 9

Photolithography, Ion Implantation, Diffusion, Oxidation, Chemical Vapour Deposition, Physical
Vapour Deposition-Sputtering, Deposition by Epitaxy, Etching, Bulk Micromanufacturing,
Micromachining Processes, LIGA Process, Microsystem Assembly and Testing.
UNIT III ELECTROSTATIC AND THERMAL BASED MEMS 9
Introduction to Electrostatic Sensors and Actuators, Parallel-Plate Capacitor, Application of
Parallel-Plate Capacitors, Interdigitated Finger Capacitors, Applications of Comb-Drive Devices,
Introduction to Thermal Sensors and Actuators, Sensors and Actuators Based on Thermal
Expansion, Thermocouples, Thermal Resistors, Shape Memory Alloy, Applications of Thermal
Sensors and Actuators.
UNIT IV PIEZO / RESISTIVE / ELECTRIC AND MAGNETIC BASED MEMS 9
Introduction to Piezoresistive & Piezoelectric effects, Piezoresistive & Piezoelectric materials,
Stress Analysis of Mechanical Elements, Applications of Piezoresistive & Piezoelectric Sensors
and Actuators, Essential Concepts and Principles of Magnetic Sensors and Actuators, Fabrication
of Micro Magnetic Components, Applications of Magnetic Sensors and Actuators.
UNIT V MICROFLUIDICS AND APPLICATIONS OF MEMS 9

Microfluidics - Fluid Mechanics Concepts, Design and Fabrication of Channels, Valves, Pumps,
Case Studies - Accelerometer, Gyros, RF MEMS and MOEMS.
TOTAL:45 PERIODS
OUTCOMES:
Understand the working principle of MEMS and methods of manufacturing Microsystems.
Select suitable microsystems for Industrial applications.
TEXT BOOKS:
1. Chang Liu, Foundations of MEMS, Pearson Education, 2012.
2. Tai-Ran Hsu, MEMS and Micro systems Design and Manufacture, McGraw Hill Education,
2015.
79
REFERENCES:
1. Stephen D Senturia, Microsystem Design, Kluwer Academic Publishers, 2002.
2. Marc Madou, Fundamentals of Microfabrication, CRC Press, 2002.
3. Nitaigour Premchand Mahalik, MEMS, McGraw Hill Education, 2014.
ME 7012 MICROCONTROLLER AND EMBEDDED SYSTEMS L T P C

3 0 0 3
OBJECTIVE:
The students will learn the Architecture of Microcontroller, Fundamentals of Assembly
language Programming, Programming of Microcontroller and Interfacing of I/O Devices
with Microcontroller.
UNIT I INTRODUCTION TO MICROCONTROLLER 9

Microprocessors and Microcontrollers - CISC and RISC - Fundamentals of Assembly Language
Programming - Instruction to Assembler - C Programming for Microcontrollers - Compiler and IDE
- Introduction to Embedded Systems - Architecture of 8051 family - PIC 18FXXX - Family -
Memory Organization.
UNIT II PROGRAMMING OF 8051 MICROCONTROLLER 9

Instruction Set - Addressing Modes - I/O Programming - Timer/Counter - Interrupts - Serial
Communication of 8051.
UNIT III PROGRAMMING OF PIC18FXXX MICROCONTROLLER 9

Instruction Set - Addressing Modes - I/O Programming - Timer/Counter - Interrupts Serial
Communication, CCP, ECCP, PWM Programming of PIC18FXXX.
UNIT IV PERIPHERAL INTERFACING 9

Interfacing of Relays, Memory, Key Board, Displays - Alphanumeric and Graphic, RTC, ADC and
DAC, I2C, Stepper Motors and DC Motors, SPI with 8051 and PIC Family.
UNIT V SPECIAL PURPOSE MICROCONTROLLER & APPLICATIONS 9

Application of Microcontroller in Washing Machine, Electronic Voltage Stabilizer, ECU in
Automobiles, Simple Robotics. Dedicated Controller for Motor Drives, Inverters, Mobile
Applications.
TOTAL:45 PERIODS
OUTCOME:
Understand the application of 8051 and PIC microcontrollers.
TEXT BOOKS:
1. Muhammad Ali Mazidi, Janice Gillispie Mazidi and Rolin D,Mckinlay, The 8051 Microcontroller
and Embedded Systems, Pearson Education, 2011.
2. Manish K. Patel, The 8051Microcontroller based embedded systems, McGraw Hill Education,
2014.
REFERENCES:
1. Muhammad Ali Mazidi, Rolin D,Mckinlay and Danny Causey PIC Microcontroller and
Embedded Systems Pearson Education, 2014.
2. M.Rafiquzzaman, Microcontroller theory and applications with the PIC18F, Wiley, 2014.
3. Kenneth J. Aylala, The 8051 Microcontroller, Thomson Learning, 2005
4. John B. Peatman, PIC programing, McGraw Hill International, 2005.
5. Julio Sanchez and Maria P.Canton Microcontroller Programming, CRC Press, 2013.
6. James W. Stewart, The 8051 Micro controller hardware, software and Interfacing, Prentice
Hall, 2003.
80
ME 7013 NEW AND RENEWABLE SOURCES OF ENERGY L T P C
3 0 0 3
OBJECTIVES:
To instruct the importance of renewable energy sources and its utilization.
To educate the various renewable energy technologies.
UNIT I SOLAR ENERGY 9

Present renewable energy status in India - Solar radiation Measurements of solar radiation and
sunshine Solar thermal collectors Flat plate and concentrating collectors Solar thermal
applications Solar thermal energy storage Fundamentals of solar photo voltaic conversion
Solar cells Solar PV Systems Solar PV applications.
UNIT II WIND ENERGY 9

Wind data and energy estimation Betz limit - Site selection for windfarms Horizontal axis wind
turbine Vertical axis wind turbine Wind turbine generators and its performance Hybrid
systems Environmental issues - Applications.
UNIT III BIO - ENERGY 9

Bio resources Biomass direct combustion Biomass gasifier - Types of biomass gasifiers -
4Cogeneration - Carbonisation Pyrolysis - Biogas plants Digesters Biodiesel production
Ethanol production - Applications.
UNIT IV OCEAN AND GEOTHERMAL ENERGY 9

Small hydro - Tidal energy Wave energy Open and closed OTEC Cycles Limitations
Geothermal energy Geothermal energy sources - Types of geothermal power plants
Applications - Environmental impact.
UNIT V NEW ENERGY SOURCES 9

Fuel cell Principle - Types of fuel cells Hydrogen energy Properties Hydrogen production
Storage Transport and utilisation - Safety issues.
TOTAL:45 PERIODS
OUTCOME:
Know the importance of renewable energy sources utilization and various renewable
energy technologies.
TEXT BOOKS:
1. G.D. Rai, Non Conventional Energy Sources, Khanna Publishers, New Delhi, 2014.
2. Twidell, J.W. & Weir, A., Renewable Energy Resources, EFN Spon Ltd., UK, 2005.
REFERENCES:
1. Godfrey Boyle, Renewable Energy, Power for a Sustainable Future, Oxford University Press,
U.K., 2012.
2. S.P. Sukhatme, Solar Energy: Principles of Thermal Collection and Storage, Tata McGraw
Hill Publishing Company Ltd., New Delhi, 2009.
3. G.N. Tiwari, Solar Energy Fundamentals Design, Modelling and applications, Alpha
Science Intl Ltd, 2015.
4. B.H. Khan, Non-Conventional Energy Resources, The McGraw Hill companies, 2009
81
ME 7014 NON-DESTRUCTIVE MATERIALS EVALUATION L T P C
3 0 0 3
OBJECTIVE:
To impart knowledge on various Non-Destructive Evaluation and Testing methods,
Interpretation of results, theory and their industrial applications.
UNIT I INTRODUCTION AND VISUAL INSPECTION METHODS 9

NDT versus Mechanical testing, Need for NDT, Relative merits and limitations, various physical
characteristics of materials and their applications in NDT.
Visual Inspection -Unaided, Aided- Borescopes -Videoscopes, Special features in Borescopes,
Selection of borescopes, Optical sensors, Microscopes & replication Microscopy Technique and
applications.
UNIT II LIQUID PENETRANT TESTING AND MAGNETIC PARTICLE TESTING 9

LPT - Principle, types, Procedures, Penetrants and their characteristics, Emulsifiers, Solvent
Cleaners / Removers, Developers- properties and their forms, Equipments, Advantages and
limitations, Inspection and Interpretation, Applications.
MPT-Principle, Theory of Magnetism, Magnetising current, Magnetisation methods, Magnetic
particles, Procedure, Interpretation, Relevant and Non-relevant indications, Residual magnetism,
Demagnetisation need, methods,Advantages and Limitations, Applications, Magnetic Rubber
Inspection, Magnetic Printing, Magnetic Painting.
UNIT III THERMOGRAPHY AND EDDY CURRENT TESTING 9

Thermography Introduction, Principle, Contact & Non-Contact inspection methods, Active &
Passive methods, Liquid Crystal Concept, example, advantages &limitations. Electromagnetic
spectrum, infrared thermography- approaches, IR detectors, Instrumentation and methods and
applications.
Eddy current Testing Principle, properties of eddy currents, Eddy current sensing elements,
probes, Instrumentation, Types of arrangement, Advantages & Limitations, Interpretation of
Results & applications.
UNIT IV ULTRASONIC TESTING AND ACOUSTIC EMISSION TESTING 9

Ultrasonic Testing-Principle, Basic Equipment, Transducers, couplants, Ultrasonic wave, Variables
in UT, Transmission and Pulse-echo method, Straight beam and angle beam, A-Scan, B-Scan &
C-Scan, Phased Array Ultrasound & Time of Flight Diffraction, Advantages & Limitations,
Interpretation of Results & Applications.
Acoustic Emission Technique Introduction, Types of AE signal, AE wave propagation, Source
location, Kaiser effect, AE transducers, Principle, AE parameters, AE instrumentation, Advantages
& Limitations, Interpretation of Results, Applications.
UNIT V RADIOGRAPHY 9
Introduction, Principle, X-ray Production, Gamma ray sources, tubing materials, Xray tubing
characteristics, Interaction of X-ray with matter, Imaging, Film techniques, Filmless techniques,
Types and uses of filters and screens, Real time radiography, geometric factors, inverse square
law, characteristics of film, graininess, density, speed, contrast, characteristic curves,
Penetrameters, Exposure charts, Radiographic equivalence. Fluoroscopy- Xero-Radiography,
Digital Radiography Film Digitisation, Direct Radiography & Computed Radiography, Computed
Tomography, Gamma ray Radiography, Safety in X- ray and Gamma Rray radiography.
TOTAL:45 PERIODS
OUTCOME:
Evaluate and interpret components / products through NDT either as Quality Assurance
Team Member or Production Team Member.
TEXT BOOKS:
1. ASM Metals Handbook, Non-Destructive Evaluation and Quality Control, American Society of
Metals, Metals Park, Ohio, USA, 200, Volume-17.
82
2. Paul E Mix, Introduction to nondestructive testing: a training guide, Wiley, 2nd edition New
Jersey, 2005
REFERENCES:
1. Baldev Raj, T.Jayakumar, M.Thavasimuthu Practical Non-Destructive Testing, Narosa
Publishing House, 2009.
2. Ravi Prakash, Non-Destructive Testing Techniques, New Age International Publishers, 1st
revised edition, 2010
3. Charles, J. Hellier, Handbook of nondestructive evaluation, McGraw Hill, New York 2001.
4. G. Gaussorgues, Infrared Thermography, Chapman & Hall, University Press, Cambridge,
1994.
5. ASNT, American Society for Non Destructive Testing, Columbus, Ohio, NDT Handbook,Vol. 1,
Leak Testing, Vol. 2, Liquid Penetrant Testing, Vol. 3, Infrared and Thermal Testing Vol. 4,
Radiographic Testing, Vol. 5, Electromagnetic Testing, Vol. 6, AcousticEmission Testing, Vol.
7, Ultrasonic Testing.
ME 7015 PRINCIPLES OF ROBOTICS L T P C

3 0 0 3
OBJECTIVES:
To impart knowledge about the Robot Anatomy and its Kinematics.
To gain knowledge about Robot Control, Robot Programming and Applications of Robots.
UNIT I FUNDAMENTALS OF ROBOTICS AND THEIR ACTUATORS 9

Introduction to Robotics, Robot Joints, Robot Configurations - Joint Notations - Work Envelope
Applications and Limitations, Speed of Motion and Load Carrying Capacity, Robot Control
Systems, Precision of Movement.
Overview of Electric, hydraulic and Pneumatic Drives, Stepper & Servo Drives Linear & Rotary
types, Smart Actuators of Micro Robots.
UNIT II ROBOT LOCOMOTION AND END EFFECTORS 9

Walkers - Leg Actuators Leg Geometry Walking Techniques, Pipe Crawlers, Tracked Vehicles
and Suspension Systems, Robot End Effector Grippers and Gripper force analysis Robot
Tools Considerations in Gripper Selection and Design.
UNIT III ROBOT SENSORS AND VISION 9

Tactile Sensors, Proximity and Range Sensors, Sensing and digitizing function in Robot Vision,
Image processing and Analysis, Training the Vision System, Applications of Robot Sensors and
Vision.
UNIT IV ROBOT MOTION ANALYSIS AND CONTROL 9

Introduction to manipulator Kinematics, Homogeneous Transformations and Robot Kinematics,
Manipulator Path Control, Robot Arm Statics and Dynamics, Trajectory Planning, Robot Control
System.
UNIT V ROBOT PROGRAMMING AND APPLICATIONS 9

Classification of Robot Languages and Programming, Graphical Simulation of Robotic Work cells,
Robot Cell Design and Control, Humanoid Robots, Micro Robots, Tele-operated Robots,
Application of Robots in Surgery, Manufacturing, Space and Underwater.
TOTAL:45 PERIODS
83
OUTCOME:
Have knowledge on the fundamentals of Robotics, Robot Kinematics and Programming
which help them to build and work with Robots.
TEXT BOOKS:
1. C Robert J Schilling, Fundamentals of Robotics Analysis and Control, Pearson Education,
2009.
2. 2.Groover M.P., Weiss M., Nagel R.N. and Odrey N.G., Industrial Robotics -Technology,
Programming and Applications, McGraw Hill Education, 2011.
REFERENCES:
1. Craig J.J., Introduction to Robotics Mechanics and Control, Pearson
Education, 2008.
2. Fu K.S., Gonzalz R.C. and Lee C.S.G., Robotics Control, Sensing, Vision and Intelligence,
McGraw Hill Education, 2008.
3. Deb S.R. and Deb S., Robotics Technology and Flexible Automation, McGraw Hill Education,
2010.
4. Maja J Mataric, The Robotics Primer, Universities Press, 2009.
ME 7016 REFRIGERATION AND AIR CONDITIONING L T P C

3 0 0 3
OBJECTIVE:
To understand the principle of operation and design aspects of Refrigeration & Air
conditioning systems and components.
UNIT I VAPOUR COMPRESSION REFRIGERATION SYSTEM 9

Introduction to Refrigeration - Unit of Refrigeration and C.O.P. Ideal cycles- Vapor compression
cycle: p-h and T-s diagrams - deviations from theoretical cycle - sub-cooling and super heating-
effects of condenser and evaporator pressure on COP- multi-pressure system - low temperature
refrigeration - Cascade systems problems.
UNIT II REFRIGERANTS AND COMPONENTS OF REFRIGERATION SYSTEMS 9

Refrigerants desirable properties Classification - Nomenclature - ODP & GWP; Equipments:
Type of Compressors, Condensers, Expansion devices, Evaporators.
UNIT III OTHER REFRIGERATION SYSTEMS 9

Working principles of Vapour absorption systems and adsorption cooling systems - Steam jet
refrigeration- Thermoelectric refrigeration- Air refrigeration - Magnetic - Vortex and Pulse tube
refrigeration systems.
UNIT IV PSYCHROMETRIC PROPERTIES AND PROCESSES 9

Properties of moist Air-Gibbs Dalton law, Specific humidity, Dew point temperature, Degree of
saturation, Relative humidity, Enthalpy, Humid specific heat, Wet bulb temp., Thermodynamics wet
bulb temp., Psychrometric chart; Psychrometry of air-conditioning processes, mixing of air stream.
UNIT V AIR CONDITIONING SYSTEMS AND LOAD ESTIMATION 9

Air conditioning loads: Outside and inside design conditions; Heat transfer through structure, Solar
radiation, Electrical appliances, Infiltration and ventilation, internal heat load; Apparatus selection;
fresh air load, human comfort & IAQ principles, effective temperature & chart, calculation of
summer & winter air conditioning load; Classifications, Layout of plants; Air distribution system. Air
Conditioning Systems with Controls: Temperature, Pressure and Humidity sensors, Actuators &
Safety controls, Filters.
TOTAL:45 PERIODS
84
OUTCOME:
Appreciate the principles of operation of different Refrigeration and Air conditioning
systems in total as well as the significance of the various component system.
TEXT BOOKS:
1. Arora, C.P., Refrigeration and Air Conditioning, McGraw Hill, 3rd ed, New Delhi, 2010.
2. Stoecker, W.F. and Jones J. W., Refrigeration and Air Conditioning, McGraw Hill, New Delhi,
1986.
REFERENCES:
1. Roy J. Dossat, Principles of Refrigeration, Pearson Education Asia, 4th ed, 2009.
2. ASHRAE Hand book, Fundamentals 2010
3. Jones W.P., Air conditioning engineering, Elsevier Butterworth-Heinemann, 5th ed, 2001.
ME 7017 STATISTICAL PROCESS CONTROL AND RELIABILITY L T P C

ENGINEERING 3 0 0 3
OBJECTIVES:
To learn the concept of SQC and reliability.
To understand the process control and acceptance sampling procedure and their
application.
UNIT I INTRODUCTION AND STATISTICAL PROCESS CONTROL 9

Introduction:-definitions of quality, Evolution of Quality: Inspection, Quality Control, Quality
assurance Customer-Orientation: Internal & External Customer Concept, Life cycle approach to
quality costs- Prevention; Appraisal and Failure costs. Seven SPC tools -Histogram, Check
sheets, Ishikawa diagrams, Pareto, Scatter diagrams, Control charts and flow chart.
UNIT II ONLINE QUALITY CONTROL 9

Control chart for attributes control chart for non conformings p chart and np chart control chart
for nonconformities C and U charts, Control chart for variables X chart, R chart and chart -
State of control and process out of control identification in charts, pattern study and process
capability studies.
UNIT III OFFLINE QUALITY CONTROL 9

Lot by lot sampling types probability of acceptance in single, double, multiple sampling
techniques O.C. curves producers Risk and consumers Risk. AQL, LTPD, AOQL concepts-
standard sampling plans for AQL and LTPD- uses of standard sampling plans.
UNIT IV RELIABILITY CONCEPTS 9

Reliability engineering - fundamentals failure data analysis, Mean failure rate, Mortality curve-
concept of burn in period, useful life and wear out phase of a system, mean time to failure, mean
time between failure, hazard rate failure density and conditional reliability-Maintainability and
availability simple problems.
UNIT V RELIABLITY ESTIMATION 9

System reliability: Series, Parallel and Mixed configurations, Reliability improvements techniques-
use of Pareto analysis design for reliability redundancy unit and standby redundancy- fault tree
analysis Optimization in reliability Product design Product analysis Product development
Product life cycles.
TOTAL: 45 PERIODS
85
OUTCOME:
Upon successful completion of this course, the students will be able to apply the concept of
SQC in process control for reliable component production
TEXT BOOKS:
1. Douglas.C. Montgomery, Introduction to Statistical quality control, 7th edition, John Wiley
2012.
2. Srinath. L.S., Reliability Engineering, 4th edition Affiliated East west press, 2005.
.
REFERENCES:
1. John.S. Oakland. Statistical process control, 5th edition, Elsevier, 2005
2. Connor, P.D.T.O., Practical Reliability Engineering, Wiley India, 2008
3. Grant, Eugene .L Statistical Quality Control, TMH, 2005
4. Monohar Mahajan, Statistical Quality Control, Dhanpat Rai & Sons, reprint 2013.
5. Besterfield D.H., Quality Control, 8th edition, Prentice Hall, 2009..
.
ME 7018 THEORY OF METAL FORMING L T P C

3 0 0 3
OBJECTIVES:
To impart knowledge on plasticity, surface treatment for forming of various types of metal
forming process.
To study the basic concepts of metal forming techniques and force calculation in metal
forming process.
To study the thermo - mechanical regimes and its requirements in metal forming.
UNIT I THEORY OF PLASTICITY 9

Theory of plastic deformationYield criteriaTresca and von-MisesDistortion energyStress-strain
relationMohrs circle representation of a state of stresscylindrical and spherical co-ordinate
systemsupper and lower bound solution methodsOverview of FEM applications in Metal
Forming.
UNIT II THEORY AND PRACTICE OF BULK FORMING PROCESSES 9

Analysis of plastic deformation in Forging, Rolling, Extrusion, rod/wire drawing and tube drawing
Effect of frictioncalculation of forces, work doneProcess parameters, equipment used Defects
applicationsRecent advances in Forging, Rolling, Extrusion and Drawing processesDesign
consideration in forming.
UNIT III SHEET METAL FORMING 9

Formability studiesConventional processesHERF techniquesSuperplastic forming techniques
Hydro formingStretch formingWater hammer formingPrinciples and process parameters
Advantage, Limitations and application.
UNIT IV POWDER METALLURGY AND SPECIAL FORMING PROCESSES 9

Overview of P/M technique Advantages applications Powder preform forging powder rolling
Tooling, process parameters and applications - Orbital forging Isothermal forging Hot and
cold isostatic pressing High speed extrusion Rubber pad forming Fine blanking LASER
beam forming.
UNIT V SURFACE TREATMENT AND METAL FORMING APPLICATIONS 9

Experiment techniques of evaluation of friction in metal forming selection influence of
temperature and gliding velocity Friction heat generation Friction between metallic layers
Lubrication carrier layer Surface treatment for drawing, sheet metal forming, Extrusion, hot and
86
cold forging. Processing of thin Al tapes Cladding of Al alloys Duplex and triplex steel rolling
Thermo mechanical regimes of Ti and Al alloys during deformation Formability of welded blank
sheet Laser structured steel sheet - Formability of laminated sheet.
TOTAL:45 PERIODS
OUTCOME:
Upon completion of the course the students will be able to:
Use of mechanical and thermodynamics principle of plastic deformation to form the
components using different metal forming techniques.
TEXT BOOKS:
1. Surender Kumar, Technology of Metal Forming Processes, Prentice Hall India Publishers,
2008.
2. Nagpal G.R., Metal Forming Processes-Khanna publishers, 2005.
REFERENCES:
1. Helmi A Youssef, Hassan A. El-Hofy, Manufacturing Technology: Materials, Processes and
Equipment, CRC publication press, 2012.
2. SAE Transactions, Journal of Materials and Manufacturing Section 5, 1993 2007.
3. Dieter,G.E,Mechanical Metallurgy TMH, Third edition March 2013.
4. Marciniak,Z., Duncan J.L., Hu S.J., Mechanics of Sheet Metal Forming, Butterworth-
Heinemann An Imprint of Elesevier, 2006.
5. Altan T., Metal forming Fundamentals and applications American Society of Materials
Park, 2003.
6. ASM Hand book, Forming and Forging, Ninth edition, Vol 14, 2003.
7. Shiro Kobayashi,Soo-Ik Oh,Taylan Altan-,Metal forming and Finite Element Method, Oxford
8. Proc. Of National Seminar on - Advances in Metal Forming MIT, March 2000.
ME 7019 TURBO MACHINERY L T P C

3 0 0 3
OBJECTIVE:
To understand the process of energy transfer and operating principles of various
turbomachines and their use for various engineering applications.
UNIT I WORKING PRINCIPLES 9

Classification of Turbomachines. Energy transfer between fluid and rotor - Euler equation and its
interpretation. Velocity triangles. Thermal, Mechanical and overall efficiencies. Polytropic
efficiency. Degree of reaction. Dimensionless parameters for Turbomachines.
UNIT II CENTRIFUGAL FANS AND BLOWERS 9

Types components working. Flow analysis in impeller blades-volute and diffusers. Velocity
triangles - h-s diagram. Performance characteristic curves various losses.
UNIT III CENTRIFUGAL COMPRESSOR 9

Components - Impeller types. Velocity triangles - h-s diagram. slip factor and power input factor.
Performance characteristics and various losses. Geometry and performance calculation.
UNIT IV AXIAL FLOW COMPRESSOR 9

Construction details. Work done factor. Stage velocity diagrams - h-sdiagram. Performance
characteristics, efficiency and stage losses. Vortex theory.
87
UNIT V AXIAL AND RADIAL FLOW TURBINES 9
Components - Types - Stage velocity diagrams - impulse and reaction stages. Performance
coefficients and losses. Multistaging. Optimum conditions. Performance characteristics.
TOTAL:45 PERIODS
OUTCOME:
Explain the various systems, principles and applications and different types of turbo
machinery components.
TEXT BOOKS:
1. Yahya, S.M., Turbines, Compressor and Fans, 4th Edition, Tata McGraw Hill, 2011.
2. Ganesan, V., Gas Turbines, 3rd Edition, Tata McGraw Hill, 2011.
REFERENCES:
1. Saravanamutto, Rogers, Cohen, Straznicky., Gas Turbine Theory, 6 th Edition, Pearson
Education Ltd, 2009.
2. Bruno Eck., Fans; design and operation of centrifugal, axial-flow, and cross-flow fans,
Pergamom Press, 1973.
3. Dixon, S.L., Fluid Mechanics and Thermodynamics of Turbomachinery, 7th Edition,
Butterworth-Heinemann, 2014.
4. Shepherd, D.G., Principles of Turbomachinery, Collier Macmillan Ltd, 1961.
5. Stepanoff, A.J., Blowers and Pumps, John Wiley and Sons Inc. 1965.
6. Gopalakrishnan .G and Prithvi Raj .D, A Treatise on Turbomachines, Scitech Publications
(India) Pvt. Ltd., 2nd Edition, 2008.
ME7071 AUTOMOBILE ENGINEERING L T P C

3 0 0 3
OBJECTIVE:
To provide a first course of teaching such that the learners are able to visualise the scope
of Automobile Engineering.
UNIT I INTRODUCTON TO AUTOMOTIVES 9

An overview of different types of automobiles and their power sources. Specifications,
Performance Parameters, Quality standards, Trends in automobile design.
UNIT II POWER SOURCE FEATURES 9

Reciprocating Engine systems, Rotary Engine systems, Gas Turbine systems, Hybrid systems.
Pollutant emissions and their control; Catalytic converter systems, Electronic Engine Management
systems.
UNIT III TRANSMISSION, SUSPENSION AND BRAKING SYSTEMS 9

Clutch system, Gear box system, propeller shafting, differential, axles, wheels and tyres and
preliminaries of suspension systems.
UNIT IV AUXILIARY SYSTEMS 9

Electrical and electronic systems, safety systems, Heating, Ventilation, and Air Conditioning
(HVAC) systems, Vehicle Thermal Management System and vehicle body design features.
UNIT V TESTS, SERVICE AND MAINTENANCE 9

Engine Tuning, vehicle maintenance, engine and Chassis Dynamometry Pollutants and emissions
check, Wind Tunnel Tests, preliminaries of engine and vehicle testing.
TOTAL:45 PERIODS
88
OUTCOMES:
Identify the different components in an automobile.
Clearly understand different auxiliary and transmission systems.
TEXT BOOK:
1. William H. Crouse and Donald L. Anglin, Automotive Mechanics, Tata McGraw Hill, 2004,
Tenth Edition.
REFERENCES:
1. Bosch Automotive Handbook, Robert Bosch GmbH, Germany, 2004, Sixth Edition.
2. Jack Erjavek, Automotive Technology A Systems Approach, Thomson Learning, 3rd Edition,
1999.
ME7072 COMPUTATIONAL TECHNIQUES FOR FLUID DYNAMICS L T P C

3 0 0 3
OBJECTIVES:
To enable the students to understand the various discretization methods, solution
procedures and turbulence modeling.
To create confidence in solving complex problems in the field of fluid flow and heat transfer
by using high speed computers.
UNIT I GOVERNING EQUATIONS AND BOUNDARY CONDITIONS 9

Basics of computational fluid dynamics Governing equations of fluid dynamics Continuity,
Momentum and Energy equations Chemical species transport Physical boundary conditions
Time-averaged equations for Turbulent Flow TurbulentKinetic Energy Equations
Mathematical behaviour of PDEs on CFD - Elliptic, Parabolic and Hyperbolic equations.
UNIT II FINITE DIFFERENCE AND FINITE VOLUME METHODS FOR DIFFUSION 9

Derivation of finite difference equations Simple Methods General Methods for first and second
order accuracy Finite volume formulation for steady state One, Two and Three -dimensional
diffusion problems Parabolic equations Explicit and Implicit schemes Example problems on
elliptic and parabolic equations Use of Finite Difference and Finite Volume methods.
UNIT III FINITE VOLUME METHOD FOR CONVECTION DIFFUSION 9

Steady one-dimensional convection and diffusion Central, upwind differencing schemes
properties of discretization schemes Conservativeness, Boundedness, Transportiveness, Hybrid,
Power-law, QUICK Schemes.
UNIT IV FLOW FIELD ANALYSIS 9

Finite volume methods -Representation of the pressure gradient term and continuity equation
Staggered grid Momentum equations Pressure and Velocity corrections Pressure Correction
equation, SIMPLE algorithm and its variants PISO Algorithms.
UNIT V TURBULENCE MODELS AND MESH GENERATION 9

Turbulence models, mixing length model, Two equation (k-) models High and low Reynolds
number models Structured Grid generation Unstructured Grid generation Mesh refinement
Adaptive mesh Software tools.
TOTAL:45 PERIODS
OUTCOMES:
Create numerical models and their role in the field of fluid flow and heat transfer
Use the various discretization methods, solution procedures and turbulence models to
solve flow and heat transfer problems.
89
TEXT BOOKS:
1. Versteeg, H.K., and Malalasekera, W.,An Introduction to Computational Fluid Dynamics: The
finite volume Method, Pearson Education Ltd. Third Edition 2014.
2. Ghoshdastidar, P.S., Computer Simulation of flow and heat transfer, Tata McGraw Hill
Publishing Company Ltd., 1998.
REFERENCES:
1. John D. Anderson Computational Fluid Dynamics - The basics with Applications, McGraw-Hill
International Editions, 1995.
2. Anil W. Date, Introduction to Computational Fluid Dynamics, Cambridge University Press,
Reprinted 2010.
3. Yogesh Jaluria & Kenneth E. Torrance, Computational Heat Transfer, CRC press, 2nd Edition,
2002.
4. John. F. Wendt, Computational Fluid Dynamics An Introduction, Springer, Third Edition,
2013.
5. Suhas V, Patankar, Numerical Heat transfer and Fluid flow, Taylor & Francis, 2009.
ME 7073 DESIGN FOR MANUFACTURING L T P C

3 0 0 3
OBJECTIVE:
To understand the design constraints in manufacturing and assembly operations.
UNIT I INTRODUCTION AND CASTING 9
Introduction - Economics of process selection - General design principles for manufacturability;
Design considerations for: Sand cast Die cast Permanent mold cast parts.
UNIT II FORMING 9
Design considerations for: Metal extruded parts Impact/Cold extruded parts Stamped parts
Forged parts.
UNIT III WELDING 9

Arc welding Design considerations for: Cost reduction Minimizing distortion Weld strength
Weldment & heat treatment. Resistance welding Design considerations for: Spot Seam
Projection Flash & Upset weldment.
UNIT IV MACHINING 9
Design considerations for: Turned parts Drilled parts Milled, planed, shaped and slotted parts
Ground parts.
UNIT V ASSEMBLY 9
Design for assembly General assembly recommendations Minimizing the no. of parts Design
considerations for: Rivets Screw fasteners Gasket & Seals Press fits Snap fits Automatic
assembly.
TOTAL:45 PERIODS
OUTCOME:
Gain technical competency in design modification of components / products with respect to
manufacturability.
TEXT BOOK:
REFERENCES:
1. Boothroyd, G., Dewhurst, P., & Knight, A. W., Product Design for Manufacture and Assembly,
3rd Edition, CRC Press Taylor Francis Group, 2011.
2. Harry Peck, Designing for Manufacture, Sir Isaac Pitman & Sons Ltd., 1973.
90
ME 7074 DESIGN OF HEAT EXCHANGERS L T P C
3 0 0 3
OBJECTIVES:
To learn thermal and stress analysis on various parts of the heat exchangers
To analyze the sizing and rating of the heat exchangers for various applications.
Types of heat exchangers, shell and tube heat exchangers regenerators and recuperators -
Temperature distribution and its implications - Parts description, Classification as per Tubular
Exchanger Manufacturers Association (TEMA).
UNIT II PROCESS DESIGN OF HEAT EXCHANGERS 9

Heat transfer correlations, Overall heat transfer coefficient, analysis of heat exchangers LMTD
and effectiveness method. Sizing of finned tube heat exchangers, U tube heat exchangers, Design
of shell and tube heat exchangers, fouling factors, pressure drop calculations.
UNIT III STRESS ANALYSIS 9

Stress in tubes header sheets and pressure vessels thermal stresses, shear stresses - types
of failures, buckling of tubes, flow induced vibration.
UNIT IV COMPACT AND PLATE HEAT EXCHANGER 9

Types- Merits and Demerits- Design of compact heat exchangers, plate heat exchangers,
performance influencing parameters, limitations.
UNIT V CONDENSERS AND COOLING TOWERS 9

Design of surface and evaporative condensers cooling tower performance characteristics.
TOTAL:45 PERIODS
OUTCOME:
Apply the mathematical knowledge for thermal and stress analysis of various parts of the
heat exchangers components.
TEXT BOOKS:
1. Sadik Kakac, Hongtan Liu, Anchasa Pramuanjaroenkij, Heat Exchangers Selection, Rating
and Thermal Design, CRC Press, Third Edition, 2012.
2. Shah, R. K., Duan P. Sekuli, Fundamentals of heat exchanger design, John Wiley & Sons,
2003.
REFERENCES:
1. Robert W. Serth, Process heat transfer principles and applications, Academic press,
Elesevier, 2010.
2. Sarit Kumar Das, Process heat transfer, Alpha Science International, 2005.
3. John E. Hesselgreaves, Compact heat exchangers: selection, design, and operation, Elsevier
science Ltd, 2001.
4. T. Kuppan, Heat exchanger design hand book, New York: Marcel Dekker, 2009.
5. Eric M. Smith, Advances in thermal design of heat exchangers: a numerical approach: direct-
sizing, step-wise rating, and transients, John Wiley & Sons, 1999.
6. Arthur. P Frass, Heat Exchanger Design, John Wiley & Sons, 1989.
7. G.F. Hewitt, G. L. Shires, T. R. Bott, Process Heat transfer, CRC Press, 1993.
91
ME 7075 DESIGN OF PRESSURE VESSELS AND PIPING L T P C
3 0 0 3
OBJECTIVES:
To apply the Mathematical knowledge gained in the design of pressure vessels and piping
To carry out the stress analysis in pressure vessels and piping.
Methods for determining stresses Terminology and Ligament Efficiency Applications.
UNIT II STRESSES IN PRESSURE VESSELS 9

Introduction Stresses in a circular ring, cylinder Dilation of pressure vessels, Membrane stress
Analysis of Vessel Cylindrical, spherical and, conical heads Thermal Stresses Discontinuity
stresses in pressure vessels.
UNIT III DESIGN OF VESSELS 9

Design of Tall cylindrical self supporting process columns Supports for short vertical vessels
Stress concentration at a variable Thickness transition section in a cylindrical vessel, about a
circular hole, elliptical openings. Theory of Reinforcement Pressure Vessel Design.
UNIT IV BUCKLING AND FRACTURE ANALYSIS IN VESSELS 9

Buckling phenomenon Elastic Buckling of circular ring and cylinders under external pressure
collapse of thick walled cylinders or tubes under external pressure Effect of supports on Elastic
Buckling of Cylinders Buckling under combined External pressure and axial loading.
UNIT V PIPING 9
Introduction Flow diagram piping layout and piping stress Analysis.
TOTAL:45 PERIODS
OUTCOMES:
Apply the mathematical fundamentals for the design of pressure vessels and pipes.
Analyse and design pressure vessels and piping.
TEXT BOOK:
1. John F. Harvey, Theory and Design of Pressure Vessels, CBS Publishers and Distributors,
1987.
REFERENCES:
1. Henry H. Bedner, Pressure Vessels, Design Hand Book, CBS publishers and Distributors,
1987.
2. Stanley, M. Wales, Chemical process equipment, selection and Design. Buterworths series in
Chemical Engineering, 1988.
3. William. J., Bees, Approximate Methods in the Design and Analysis of Pressure Vessels and
Piping, Pre ASME Pressure Vessels and Piping Conference, 1997.
4. Sam Kannapan, Introduction to Pipe Stress Analysis. John Wiley and Sons, 1985.
ME 7076 ENERGY CONSERVATION IN INDUSTRIES L T P C

3 0 0 3
OBJECTIVES:
To understand and analyse the energy data of industries.
To carryout energy accounting and balancing.
To conduct energy audit and suggest methodologies for energy savings.
To utilise the available resources in optimal ways.
92
Energy - Power Present scenario of World / Nation: Environmental aspects of Energy
Generation Energy Auditing: Need, Types, Methodology and Barriers. Role of Energy Managers.
Basic instruments for Energy Auditing.
UNIT II ECONOMICS 9
Energy / Cost index diagram Energy Economics Cost of production Economic evaluation
techniques Return on investment, Payback Period, Internal Rate of Return, Net Present
Value, Life Cycle Costing ESCO concept
UNIT III ELECTRICAL SYSTEMS 9

TANGEDCO Billing HT and LT supply - Transformers - Efficiency - Power Factor - Harmonics,
Electric Motors - Motor Efficiency Computation, Energy Efficient Motors, Illumination Lux,
Lumens, Types of lighting, Efficacy, LED Lighting and scope of Encon in Illumination.
UNIT IV THERMAL SYSTEMS 9

Stoichiometry, Combustion principles, Boilers, Furnaces and Thermic Fluid Heaters Efficiency
Computation and Encon Measures - Steam Traps - Cogeneration - Waste heat recovery devices.
UNIT V ENERGY CONSERVATION IN MAJOR UTILITIES 9
Pumps, Fans, Blowers, Compressed Air Systems, Refrigeration and Air Conditioning Systems -
Cooling Towers D.G. sets
TOTAL:45 PERIODS
OUTCOMES:
Analyse the energy data of industries.
Carry out energy accounting and balancing.
Suggest methodologies for energy savings.
TEXT BOOK:
1. Guide book for National Certification Examination for Energy Managers and Energy Auditors
(4 Volumes). Available at www.beeindia.in
REFERENCES:
1. L.C. Witte, P.S. Schmidt, D.R. Brown, Industrial Energy Management and Utilisation
HemispherePubl, Washington, 1988.
2. Guide book for National Certification Examination for Energy Managers and Energy
Auditors ( 4 Volumes ). Available at www.beeindia.in
3. Callaghn, P.W. Design and Management for Energy Conservation, Pergamon Press, Oxford,
1981.
4. I.G.C. Dryden, The Efficient Use of Energy Butterworths, London, 1982
5. W.C. Turner, Energy Management Hand book Wiley, New York, 1982.
6. W.R. Murphy and G. Mc KAY Energy Management Butterworths, London 1987.
93
ME7077 ENTREPRENEURSHIP DEVELOPMENT L T P C
3 0 0 3
OBJECTIVE:
The students will be provided with an understanding of the scope of an entrepreneur, key
areas of development, financial assistance by the institutions, methods of taxation and tax
benefits, etc.
UNIT I ENTREPRENEURSHIP 9
Entrepreneur Characteristics Types of Entrepreneurs Difference between Entrepreneur and
Intrapreneur Role of Entrepreneurship in Economic Development Factors Affecting
Entrepreneurial Growth Economic, Non Economic, Government Actions.
UNIT II MOTIVATION 9
Entrepreneurial Motivation: Theories and Factors, Achievement Motivation Entrepreneurial
Competencies Entrepreneurship Development Programs Need, Objectives Business Game,
Thematic Apperception Test, Self Rating, Stress management.
UNIT III BUSINESS 9

Small Enterprises Definition, Characteristics, Project Identification and selection Project
Formulation: Significance, content, formulation of project report Project Appraisal: Concept and
method Ownership Structures: Selection & Pattern.
UNIT IV FINANCING AND ACCOUNTING 9

Finance: Need, Sources, Capital Structure, Term Loans Accounting: Need, Objectives, Process,
Journal, Ledger, Trial Balance, Final Accounts Working Capital Management: Significance,
Assessment, Factors, Sources, Management.
UNIT V SUPPORT TO ENTREPRENEURS 9

Sickness in small Business: Concept, Signals, Symptoms, Magnitude, Causes and
Consequences, Corrective Measures Government Policy for Small Scale Enterprises: Growth
Policy, Support. Institutional Support to Entrepreneurs: Need and Support Taxation Benefits to
Small Scale Industry: Need, Depreciation, Rehabilitation, Investment.
TOTAL:45 PERIODS
OUTCOME:
Upon completion of the course, the students will be able to:
Gain knowledge and skills needed to run a business successfully.
TEXT BOOKS:
1. S.S.Khanka, Entrepreneurial Development S.Chand & Co. Ltd. Ram Nagar New Delhi,1999.
2. Kurahko & Hodgetts, Entrepreneurship Theory, process and practices, Thomson learning
6th edition.
REFERENCES:
1. Hisrich R D and Peters M P, Entrepreneurship 5th Edition Tata McGraw-Hill, 2002.
2. Mathew J Manimala, Entrepreneurship theory at cross roads: paradigms and praxis Dream
tech, 2nd edition 2006.
3. Rabindra N. Kanungo, Entrepreneurship and innovation, Sage Publications, New Delhi,
1998.
94
ME 7078 INTRODUCTION TO OPERATIONS RESEARCH L T P C
3 0 0 3
OBJECTIVE:
To introduce the concepts in optimization of resources for manufacturing and service
based industries.
UNIT I LINEAR PROGRAMMING PROBLEMS 9

OR-Definition - Phases - models, LP problems formulation Graphical solution, GLPP, Standard
and Canonical forms of LPP- simplex methods- Big M, Two phase methods, Alternate optimal
solutions, Duality in LP.
UNIT II TRANSPORTATION 9
Transportation problems- Basic feasible solution, Optimal solution By MODI method, Balanced
and Unbalanced TP, Degeneracy, Production problems. Assignment problems Hungarian
method Traveling salesman problems - Sequencing models- Johnson algorithm, n job 2 machines,
n job 3 machines and n job m machines.
UNIT III INVENTORY CONTROL 9

Types of inventory- Inventory cost - EOQ - Deterministic inventory problems Purchase and
Production models with and without shortages-EOQ with price breaks - Stochastic inventory
problems - Multi product problems - Systems of inventory control (P and Q Systems)-
Determination of buffer stock and re-order levels -Selective inventory control techniques (ABC,
VED, SDE, etc.)
UNIT IV QUEUING THEORY 9

Queuing system - Characteristics - symbols - Poisson process and exponential distribution -Single
server queuing models - Multiserver queuing models, Simulation Monte Carlo technique- Inventory
& Queuing problems.
UNIT V PROJECT MANAGEMENT AND REPLACEMENT MODELS 9

Project management: Network logic Ford-Fulkerson's rule - AON diagram - CPM and PERT
techniques, Critical path and float calculations Replacement models -types of failures Gradual
failures-replacement of items: Efficiency deteriorates with time, sudden failures- individual and
group replacement policies.
TOTAL:45 PERIODS
OUTCOME:
Understand and apply the operations research techniques in industrial operations.
TEXT BOOKS:
1. Wayne.L.Winston, Operations research applications and algorithms, 4th edition,
2007,Thomson learning.
2. Hamdy ATaha, Operations research an introduction, 9th edition 2011, PHI/Pearson
education.
REFERENCES:
1. G.Srinivasan, Operations research principles and applications, 2nd edition EEE 2010, PHI.
2. R.Pannerselvam, Operations research, 2nd edition 2009, PHI
3. Frederick. S. Hiller and Gerald.J.Lieberman, Operations research concepts and cases, 8th
edition (SIE) 2008,TMH.
4. Ravindran, Phillips and Solberg, Operations research principles and practice, 2nd edition
2007, Wiley India.
5. J.K.Sharma, Operations research theory and applications,5Th edition 2013, Macmillan India.
6. Prem kumar Gupta and D.S.Hira, Problems in Operations research,2009 S.Chand.
95
ME 7079 LEAN SIX SIGMA L T P C
3 0 0 3
OBJECTIVE:
To impart the knowledge of tools & techniques used in lean manufacturing and six sigma.
UNIT I EVOLUTION AND OVERVIEW OF LEAN MANUFACTURING 9

Evolution of Mass production, Traditional versus Mass production, Evolution of Toyota (Lean)
Production System, Business Dynamics of Lean production, Principles of Lean production Value,
Value stream, Flow, Pull, Perfection.
UNIT II LEAN MANUFACTURING TOOLS AND TECHNIQUES 9

3Ms Muda, Mura, Muri, 7 Wastes in Manufacturing, Lean Tools to eliminate Muda - 5S,
Standardised work, TPM, SMED, Jidoka Poka Yoke, JIT, Heijunka, Kanban, One piece
production.
UNIT III VALUE STREAM MAPPING 9

Need for Value Stream mapping; Steps involved in Value stream mapping Choose value stream
PQ and PR analysis, Current State map, Lean Metrics, Future State Map, Kaizen plans; Lean
implementation - Cultural change, Lean in the Supply chain.
UNIT IV SIX SIGMA TOOLS AND TECHNIQUES 9

Cost of Quality Conformance and Non-Conformance cost, 7 Basic Quality Control Tools, Seven
Management tools, FMEA.
UNIT V SIX SIGMA METHODOLOGY 9

Need for Six Sigma, Six Sigma Team, DMAIC Methodology - Define, Measure, Analyse, Improve
and Control; Lean Six Sigma.
TOTAL:45 PERIODS
OUTCOME:
Apply the various tools, techniques and methodology of lean manufacturing and six sigma
concepts to the potential quality gaps in manufacturing / production industries.
TEXT BOOKS:
1. Pascal Dennis, Lean production Simplified: A plain language guide to the worlds most
powerful Production system, Productivity Press 2007
2. Issa Bass and Barbara Lawton, Lean Six Sigma using Sigma XL and Minitab, Tata McGraw
Hill 2010.
REFERENCES:
1. Yasuhiro Monden, Toyota Production System: An Integrated approach to Just-in-Time, CRC
Press 2012
2. Taiichi Ohno, Toyota Production System: Beyond Large-Scale Production, Productivity Press
1988
3. Mike Rother and Rother Shook, Learning to See: Value-Stream Mapping to Create Value and
Eliminate Muda, The Lean Enterprise Institute 2003
4. James Womack, Daniel T. Jones, and Daniel Roos, The Machine that changed the world,
Free Press 1990
5. James Womack and Daniel T. Jones, Lean Thinking: Banish waste and create wealth in your
organization, Free Press 2003.
6. Donna C. S. Summers, Six sigma: Basic tools and techniques, Pearson / Prentice Hall
2007.
96
ME 7080 MARKETING MANAGEMENT L T P C
3 0 0 3
OBJECTIVE:
To expose the students to newer concepts of marketing principles like strategic marketing
concepts, segmentation, pricing, advertisement and strategic formulation.
UNIT I CONCEPTS IN MARKETING 9

Definition, Marketing Process, Dynamics, Needs, Wants and Demands, Marketing Concepts,
Environment, Mix, Types, Philosophies, Selling vs Marketing, Consumer Goods, Industrial Goods.
UNIT II BUYING BEHAVIOUR AND MARKET SEGMENTATION 9

Cultural, Demographic factors, Motives, Types, Buying Decisions, Segmentation factors,
Demographic, Psycho graphic and Geographic Segmentation, Process, Patterns. Services
marketing and Industrial marketing.
UNIT III PRODUCT, PRICE AND MARKETING RESEARCH 9

Product, Classifications of product, Product Hierarchy, Product Life Cycle, New product
development, Branding.
Price: Objectives, Pricing Decisions and Pricing Methods, Pricing Management, Introduction,
Uses, Process of Marketing Research.
UNIT IV MARKETING PLANNING AND STRATEGY FORMULATION 9

Components of a Marketing Plan, Strategy Formulation and the Marketing Process,
Implementation, Portfolio Analysis, BCG, GEC Grids.
UNIT V ADVERTISING, SALES PROMOTION AND DISTRIBUTION 9

Advertising-Characteristics, Impact, Goals, Types, Sales Promotion Point of purchase, Unique
Selling Propositions, Characteristics, Wholesaling, Retailing, Channel Design, Logistics, Modern
Trends in Retailing, Modern Trends, e-Marketing.
TOTAL:45 PERIODS
OUTCOME:
Understand the philosophies of marketing and should able to formulate market planning,
strategies and could promote sales in effective manner.
TEXT BOOKS:
1. Govindarajan. M, Marketing management concepts, cases, challenges and trends, Prentice
hall of India, second edition, 2007.
2. Philip Kolter & Keller, Marketing Management, Prentice Hall of India, XII edition, 2006.
REFERENCES:
1. Donald S. Tull and Hawkins, Marketing Research, Prentice Hall of Inida-1997.
2. Philip Kotler and Gary Armstrong Principles of Marketing Prentice Hall of India, XII Edn,
2000.
3. Ramasamy and Nama kumari, Marketing Management: Planning, Implementation and
Control, Macmillan and Company,, 2002
4. Czinkota&Kotabe, Marketing management, Thomson learning, Indian edition 2007
5. Adrain palmer, Introduction to marketing theory and practice, Oxford university press IE
2004.
97
ME 7081 PROCESS PLANNING AND COST ESTIMATION L T P C
3 0 0 3
OBJECTIVE:
To give an understanding of the fundamentals of Process Planning and estimation of
appropriate costs of processes and products and applying these to manage competitive
manufacturing systems and organisations.
UNIT I INTRODUCTION TO PROCESS PLANNING 9

Aims and Objectives, Place of process planning in Manufacturing cycle, Drawing interpretation,
Dimensional tolerance vs Production processes.
UNIT II PROCESS PLANNING STEPS 9

Design of a process plan Selection of production processes, tools and process parameters-
Positioning and work holding devices, Selection of inspection devices and tools, Documenting the
process plan, Simple Case studies.
Computer-Aided Process Planning (CAPP) Benefits, Architecture and approaches.
UNIT III INTRODUCTION TO COST ESTIMATION 9

Importance, Types, Purpose, Components, Procedure, Classification of costs, Cost elements,
Overhead expenses, Break-even analysis.
UNIT IV PRODUCTION COST ESTIMATION 9

Estimation of production cost for - Casting processes, Welding processes, and Forging processes.
UNIT V ESTIMATION OF MACHINING TIME AND COST 9

Estimation of Machining time Lathe operations, Drilling, Milling, Shaping and Planing, and
Grinding, Cost estimation for machining processes.
TOTAL:45 PERIODS
OUTCOME:
Make logical, rational and economical process plans and realistic cost estimates of
Components and Products.
TEXT BOOKS:
1. Gideon Halevi, Process and operation planning, Kluwer academic publishers (Printed ebook),
2003.
2. M. Adithan, Process Planning and Cost Estimation, New Age International Publishers, 2007.
REFERENCES:
1. Peter Scallan, Process planning, The Design/Manufacture interface, Butterworth-Heinemann,
2003.
2. Robert Creese, M. Adithan, B.S Pabla, Estimating and Costing for the Metal Manufacturing
Industries, Marcel Dekker, 1992.
3. Phillip F. Ostwald, Jairo Munoz, Manufacturing Processes And Systems, 9th Edition, Wiley
student edition, 2002.
4. Chitale, A, K., and Gupta, R. C,, Product Design and manufacturing, Prentice Hall of India,
New Delhi , 1997.
5. G.B.S. Narang, V. Kumar, Production and Costing, Khanna Publishers, 2000.
98
ME 7082 PRODUCT DESIGN AND DEVELOPMENT L T P C
3 0 0 3
OBJECTIVES:
To understand the basic concepts of Product Design and Process Development.
To appreciate the importance, various stages, concepts, management and prototyping of
products.
Introduction Characteristics of Successful Product Development Duration and cost of Product
Development Challenges Generic Development Process Concept Development: the Front
End Process Adaptation of the Generic Product Development Process Product Development
Process Flow Product Development Organization.
UNIT II PRODUCT PLANNING, IDENTIFYING CUSTOMER NEEDS, PRODUCT 9

SPECIFICATION
Product Planning Process: Identification of opportunities; evaluation and prioritization of projects;
allocation of resources & plan timing; completion of pre-project planning. Identification of Customer
Needs: Collection of raw data from customers; interpretation of raw data of customer needs;
organization of the needs into a hierarchy; establishment of relative importance of needs. Product
Specifications: Establishment of Target Specifications, Setting-up of Final Specifications.
UNIT III CONCEPT GENERATION, SELECTION, TESTING 9

Concept Generation: clarification of the problem; searching externally; searching internally,
systematic exploration. Concept Selection: concept screening steps; concept scoring steps.
Concept Testing: Defining the purpose of concept test; choosing a survey population; format;
communicating the concept; measuring the customer response; interpretation of results.
UNIT IV PRODUCT ARCHITECTURE, INDUSTRIAL DESIGN, DESIGN FOR 9

MANUFACTURE
Product Architecture: Types of modularity Implications Establishing the Architecture Platform
Planning. Industrial Design: Assessing the need Impact Design Process. Design for
Manufacturing: estimation of manufacturing costs; reduction of costs of components, assembly,
supporting production; other factors.
UNIT V PROTOTYPING AND MANAGING PRODUCTS 9

Prototype Basics Principles of Prototyping Prototyping Technologies Planning for Prototypes.
Management of Projects: Understanding and representing Tasks Baseline Project Planning
Accelerating Projects Project Execution Postmortem Project Evaluation.
TOTAL:45 PERIODS
OUTCOMES:
Launch own ideas and the ideas of others, which would enable them to manage to work
with innovation and development in large companies
Apply new theories on innovation and change, including emerging paradigms such as user-
driven innovation, open innovation and market forecasting in practice.
TEXT BOOK:
1. Ulrich K.T. and Eppinger S.D., Product Design and Development McGraw-Hill Education; 5
edition, 2011.
REFERENCES:
1. Belz A., 36-Hour Course: Product Development McGraw-Hill, 2010.
2. Rosenthal S., Effective Product Design and Development, Business One Orwin, Homewood,
1992, ISBN 1-55623-603-4.
3. Pugh S., Total Design Integrated Methods for Successful Product Engineering, Addison
Wesley Publishing, 1991, ISBN 0-202-41639-5.
99
ME7083 SUSTAINABLE AND GREEN MANUFACTURING L T P C
3 0 0 3
OBJECTIVES:
To inculcate the knowledge of sustainability in manufacturing.
To learn the basis involved in Green manufacturing, recycling and life cycle assessment.
UNIT I INTRODUCTION TO SUSTAINABLE MANUFACTURING 9

Sustainable Manufacturing - Concept of Triple bottom line, Environmental, Economic and Social
Dimensions of Sustainability, Sustainable Product Development Various Phases.
UNIT II EVALUATING SUSTAINABILITY 9

Sustainability performance evaluators- Frameworks and techniques - environmental management
systems - life cycle assessment - strategic and environmental impact assessments - carbon and
water foot-printing.
UNIT III MANUFACTURING STRATEGY FOR SUSTAINABILITY 9

Concepts of Competitive Strategy and Manufacturing Strategies and development of a strategic
improvement programme - Manufacturing strategy in business success Strategy formation and
formulation - Structured strategy formulation - Sustainable manufacturing system design options -
Approaches to strategy formulation - Realization of new strategies/system designs.
UNIT IV GREEN MANUFACTURING 9

Green manufacturing- Definition, motivation and barriers to green manufacturing- Environmental
impact of manufacturing- Waste generation- Energy consumption- Strategies for green
manufacturing Green manufacturing by design Life cycle assessment.
UNIT V RECYCLING 9
Reclamation and recycling of waste- Recycling as Universal resource policy- Innovation towards
environmental sustainability systematic framework for conscious design- International green
manufacturing standards and compliance.
TOTAL: 45 PERIODS
OUTCOME:
Formulate strategy for sustainable manufacturing, implement green manufacturing, follow
environmental norms in manufacturing and perform lifecycle assessment.
TEXT BOOKS:
1. Davim, J.P., Sustainable Manufacturing, John Wiley & Sons, 2010.
2. Dornfield David, Green Manufacturing, Springer, 2012.
REFERENCES:
1. Seliger, G ,Sustainable Manufacturing: Shaping Global Value Creation, Springer, 2012.
2. Jovane, F., mper, W.E. and Williams, D. J., The ManuFuture Road: Towards Competitive
and Sustainable High-Adding-Value Manufacturing, Springer, 2009.
3. Kutz, M., Environmentally Conscious Mechanical Design, John Wiley & Sons, 2007.
4. G. Atkinson, S. Dietz, E. Neumayer, Handbook of Sustainable Manufacturing. Edward Elgar
Publishing Limited, 2007
5. Christian N. Madu Handbook of environmentally conscious manufacturing London : Kluwer
Academic Publishers, 2001.
6. Joseph Sarkis Greener manufacturing and operations: from design to delivery and back
Greenleaf Pub., 2001
7. Davim.J.Pauls, Green Manufacturing Processes and Systems, Springer, 2013
100
ME 7351 DESIGN CONCEPTS IN ENGINEERING L T P C
3 0 0 3
OBJECTIVES:
To impart the importance of design in todays context of global competition, environmental
awareness and customer oriented market.
To impart the basic concepts and various aspects of design using simple examples and case
studies.
UNIT I DESIGN TERMINOLOGY 9

Definition-various methods and forms of design-importance of product design-static and dynamic
products-various design projects-morphology of design-requirements of a good design-concurrent
engineering-computer aided engineering-codes and standards-product and process cycles-bench
marking.
UNIT II DESIGN PROCESS 9

Basic modules in design process-scientific method and design method-Need identification,
importance of problem definition-structured problem, real life problem- information gathering -
customer requirements- Quality Function Deployment (QFD)- product design specifications-
generation of alternative solutions- Analysis and selection-Detail design and drawings-Prototype,
modeling, simulation, testing and evaluation.
UNIT III CREATIVITY IN DESIGN 9

Creativity and problem solving-vertical and lateral thinking-invention-psychological view, mental
blocks-Creativity methods-brainstorming, synectics, force fitting methods, mind map, concept map-
Theory of innovative problem solving (TRIZ) - conceptual decomposition creating design concepts.
UNIT IV HUMAN AND SOCIETAL ASPECTS 9

Human factors in design, ergonomics, user friendly design-Aesthetics and visual aspects
environmental aspects-marketing aspects-team aspects-legal aspects-presentation aspects.
UNIT V MATERIAL AND PROCESSES IN DESIGN 9

Material selection for performance characteristics of materials-selection for new design substitution
for existing design-economics of materials-selection methods-recycling and material selection-
types of manufacturing process, process systems- Design for Manufacturability (DFM) - Design for
Assembly (DFA).
TOTAL:45 PERIODS
OUTCOMES:
Understand the various design requirements and processes involved in product
development.
Be exposed to various creativity and problem solving techniques.
TEXT BOOK:
1. George E.Dieter, Engineering Design: A Materials and Processing Approach 4 th Edition, Tata
McGraw Hill, 2008.
REFERENCES:
1. Joseph E.Shigley, Charles R.Mische ,Mechanical Engineering Design, McGraw Hill
International edition, 6th Edition 2009.
2. Edward B.Magrab,Satyandra K. Gupta, F. Patrick McCluskey and Peter Sandborn, Integrated
Product and Process Design and Development, 2nd edition, CRC Press, 2009.
3. James Garratt, Design and Technology, 2nd Revised Edition, Cambridge University Press,
1996.
101
ME 7603 DESIGN OF JIGS, FIXTURES AND PRESS TOOLS L T P C
3 0 0 3
OBJECTIVES:
To understand the importance, functions and design principles of Jigs, fixtures and press
tools
To gain proficiency in the development of standard views of the final design.
UNIT I PRINCIPLES OF JIGS, FIXTURES AND PRESS WORKING 9

Objectives and importance of tool designwork holding devices- Basic elements of jigs and
fixtures- location clamping-indexing-operational chart-Fits and Tolerances
Tools for press working- Press Working Terminologies cutting and non cutting operations
Types of presses press accessories Computation of press capacity Strip layout Material
Utilization Shearing action Clearances Press Work Materials Center of pressure
knockouts direct and indirect pressure pads Ejectors- Die Block Punch holder, Die set,
guide plates Stops Strippers Pilots Selection of Standard parts Recent trends in tooling-
recent trends in tool design- computer Aids for sheet metal forming Analysis basic introduction -
tooling for numerically controlled machines- setup reduction for work holding Single minute
exchange of dies-Poka Yoke.
UNIT II JIGS 9
Design and development of jigs for given component - Types of Jigs Post, Turnover, Channel,
latch, box, pot, angular post jigs Indexing jigs.
UNIT III FIXTURES 9

Design and development of fixtures for given component- General principles of milling, Lathe,
boring, broaching and grinding fixtures Assembly, Inspection and Welding fixtures Modular
fixturing systems- Quick change fixtures.
UNIT IV DESIGN OF CUTTING DIES 9

Complete design and preparation of standard views of simple blanking, piercing, compound and
progressive dies -fine Blanking dies.
UNIT V DESIGN OF BENDING, FORMING, DRAWING AND MISCELLANEOUS 9

DIES
Difference between bending forming and drawing Blank development for above operations
Types of Bending dies Press capacity Spring back Variables affecting Metal flow in drawing
operations draw die inserts draw beads- ironing Design and development of bending,
forming, drawing, reverse redrawing and combination dies Blank development for axisymmetric,
rectangular and elliptic parts Single and double action dies.
TOTAL:45 PERIODS
Note: (Use of P S G Design Data Book is permitted in the University examination)
OUTCOMES:
Design jigs, fixtures and press tools and give the assembly drawing with dimensions and
Parts list.
Use the above knowledge to design various types of dies and give the standard
dimensioned views
TEXT BOOKS:
1. Joshi, P.H. Jigs and Fixtures, Second Edition, Tata McGraw Hill Publishing Co., Ltd., New
Delhi, 2010.
2. Joshi P.H Press tools - Design and Construction, S. Chand & Co Ltd2001.
102
REFERENCES:
1. K. Venkataraman, Design of Jigs Fixtures & Press Tools, Anne Publications, 2015.
2. Donaldson, Lecain and Goold Tool Design, III rd Edition Tata McGraw Hill, 2000.
3. Kempster, Jigs and Fixture Design, Hoddes and Stoughton Third Edition 1974.
4. Hoffman Jigs and Fixture Design Thomson Delmar Learning, Singapore, 2004.
5. ASTME Fundamentals of tool design- Prentice Hall of India pvt. Ltd New Delhi 1984.
6. Design Data Hand Book, PSG College of Technology, 2013, Coimbatore.
7. V.Balachandran, Design of Jigs Fixtures & Press Tools, Notion Press, 2015.
MF7071 ADDITIVE MANUFACTURING TECHNOLOGY L T P C

3 0 0 3
OBJECTIVES:
To know the principle, methods, possibilities and limitations as well as environmental
effects of Additive Manufacturing technologies.
To be familiar with the characteristics of the different materials those are used in Additive
Manufacturing technologies.
Overview Need - Development of Additive Manufacturing Technology -Principle AM Process
Chain- Classification Rapid Prototyping- Rapid Tooling Rapid Manufacturing Applications-
Benefits Case studies.
UNIT II DESIGN FOR ADDITIVE MANUFACTURING 9

Design tools: Data processing - CAD model preparation Part orientation and support structure
generation Model slicing Tool path generation- Design for Additive Manufacturing: Concepts
and objectives- AM unique capabilities DFAM for part quality improvement- Customised design
and fabrication for medical applications.
UNIT III PHOTOPOLYMERIZATION AND POWDER BED

FUSION PROCESSES 9
Photo polymerization: SLA-Photo curable materials Process - Advantages and Applications.
Powder Bed Fusion: SLS-Process description powder fusion mechanism Process Parameters
Typical Materials and Application. Electron Beam Melting.
UNIT IV EXTRUSION BASED AND SHEET LAMINATION PROCESSES 9

Extrusion Based System: FDM-Introduction Basic Principle Materials Applications and
Limitations Bioextrusion. Sheet Lamination Process:LOM- Gluing or Adhesive bonding
Thermal bonding.
UNIT V PRINTING PROCESSES AND BEAM DEPOSITION PROCESSES 9

Droplet formation technologies Continuous mode Drop on Demand mode Three Dimensional
Printing Advantages Bioplotter - Beam Deposition Process:LENS- Process description
Material delivery Process parameters Materials Benefits Applications.
TOTAL: 45 PERIODS
OUTCOME:
On completion of this course, students will learn about a working principle and construction of
Additive Manufacturing technologies, their potential to support design and manufacturing,
modern development in additive manufacturing process and case studies relevant to mass
customized manufacturing.
103
TEXT BOOKS:
1. Ian Gibson, David W.Rosen, Brent Stucker Additive Manufacturing Technologies: Rapid
Prototyping to Direct Digital Manufacturing Springer , 2010.
2. Chua C.K., Leong K.F., and Lim C.S., Rapid prototyping: Principles and applications, Third
edition, World Scientific Publishers, 2010.
REFERENCES:
1. Liou L.W. and Liou F.W., Rapid Prototyping and Engineering applications :A tool box for
prototype development, CRC Press, 2007.
2. Kamrani A.K. and Nasr E.A., Rapid Prototyping: Theory and practice, Springer, 2006.
3. Tom Page Design for Additive Manufacturing LAP Lambert Academic Publishing, 2012.
4. Andreas Gebhardt Understanding Additive Manufacturing: Rapid Prototyping, Rapid
Manufacturing Hanser Gardner Publication 2011.
MF7651 NON-TRADITIONAL MACHINING PROCESSES L T P C

3 0 0 3
OBJECTIVES:
At the end of this course the students are expected to
Understand the working principles of various non-traditional machining processes, their
applications, advantages and limitations.
The students can also able to learn advanced nano finishing processes, recent developments
in the non-traditional machining processes and to compare them.
UNIT I INTRODUCTION AND MECHANICAL ENERGY BASED PROCESSES 9

Introduction to non-traditional machining processes, need for non-traditional machining,
classification of non-traditional machining processes, their applications, advantages, limitations.
Abrasive jet machining, abrasive water jet machining, ultrasonic machining their working
principles, equipments, effect of process parameters, applications, advantages and limitations.
UNIT II CHEMICAL AND ELECTRO CHEMICAL ENERGY BASED PROCESSES 9

Chemical machining, electro-chemical machining, electro-chemical honing, electro-chemical
grinding, electro-chemical deburring their working principles, equipments, effect of process
parameters, applications, advantages and limitations.
UNIT III THERMO-ELECTRIC ENERGY BASED PROCESSES 9

Electric discharge machining, wire electric discharge machining, laser beam machining, plasma
arc machining, electron beam machining, Ion beam machining their working principles,
equipments, effect of process parameters, applications, advantages and limitations.
UNIT IV ADVANCED NANO FINISHING PROCESSES 9

Abrasive flow machining, chemo-mechanical polishing, magnetic abrasive finishing, magneto
rheological finishing, magneto rheological abrasive flow finishing their working principles,
equipments, effect of process parameters, applications, advantages and limitations.
UNIT V RECENT TRENDS IN NON-TRADITIONAL MACHINING PROCESSES 9

Recent developments in non-traditional machining processes, their working principles,
equipments, effect of process parameters, applications, advantages and limitations. Comparison
of non-traditional machining processes.
TOTAL: 45 PERIODS
OUTCOMES:
At the end of this course the students are expected to understand
The working principles of various non-traditional machining processes, their applications,
advantages and limitations.
Advanced nano finishing processes.
104
Recent developments in the non-traditional machining processes.
Comparison of non-traditional machining processes.
TEXT BOOKS:
1. M. Adithan, Unconventional Machining Processes, Atlantic, New Delhi, 2009.
2. V. K. Jain, Introduction to Micromachining, Narosa publishing House, New Delhi, 2014.
REFERENCES:
1. V. K. Jain, Advanced Machining Processes, Allied Publishers Pvt. Ltd., New Delhi,
2002.
2. Serope Kalpakjian and Steven R. Schmid, Manufacturing Engineering and Technology,
Prentice Hall, 2013.
3. Serope Kalpakjian and Stevan R. Schemid, Manufacturing Processes for Engineering
Materials, Pearson Education, 2008.
4. Brahem T. Smith, Advanced machining, I.F.S., U.K, 1989.
5. Benedict, G.F., Non-traditional Manufacturing Processes, Marcel Dekker Inc., New York
1987.
6. Pandey P.C. and Shan H.S., Modern Machining Processes, Tata McGraw Hill, New
Delhi,1980.
7. Metals Handbook, Vol. 3, Machining, American Society for Metals, Metals Park, USA.
105

Mech PDF

Uploaded by

Copyright:

Available Formats

Mech PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mech PDF

Uploaded by

Copyright:

Available Formats

ANNA UNIVERSITY, CHENNAI

CHOICE BASED CREDIT SYSTEM

B.E. MECHANICAL ENGINEERING

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs) :

PROGRAMME OUTCOMES (POs):

Mapping PEO with POs:

Creative and Innovative Project

SL. COURSE COURSE TITLE CATEGORY CONTACT

SL. COURSE COURSE TITLE CATEGORY CONTACT

SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C

SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C

SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C

SL. COURSE CONTACT

SL. COURSE CONTACT

2. ME7701 Computer Integrated PC 3 3 0 0 3

SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C

TOTAL NO. OF CREDITS:179

*Course from the curriculum of other UG Programmes

SL. COURSE CONTACT

BASIC SCIENCES (BS)

ENGINEERING SCIENCES (ES)

SL. COURSE CONTACT

SL. COURSE CONTACT

PROFESSIONAL ELECTIVES (PE)

SL. COURSE CONTACT

UNIT II GIVING INSTRUCTIONS AND DIRECTIONS 12

UNIT III READING AND UNDERSTANDING VISUAL MATERIAL 12

UNIT IV CRITICAL READING AND WRITING 12

UNIT V LETTER WRITING AND SENDING E-MAILS 12

UNIT I DIFFERENTIAL CALCULUS 12

UNIT III INTEGRAL CALCULUS 12

UNIT V DIFFERENTIAL EQUATIONS 12

UNIT I PROPERTIES OF MATTER 9

UNIT II ACOUSTICS AND ULTRASONICS 9

UNIT III THERMAL AND MODERN PHYSICS 9

UNIT IV APPLIED OPTICS 9

UNIT V CRYSTAL PHYSICS 9

CY7151 ENGINEERING CHEMISTRY L T P C

UNIT II SURFACE CHEMISTRYAND CATALYSIS 9

UNIT III PHOTOCHEMISTRY AND SPECTROSCOPY 9

UNIT IV CHEMICAL THERMODYNAMICS 9

GE7152 ENGINEERING GRAPHICS L T P C

CONCEPTS AND CONVENTIONS (NOT FOR EXAMINATION) 1

UNIT I PLANE CURVES AND FREE HANDSKETCHING 14

UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

UNIT III PROJECTION OF SOLIDS 14

Special points applicable to University Examinations on Engineering Graphics:

PHYSICS LABORATORY: (Any Seven Experiments)

(Minimum of 8 experiments to be conducted)

GROUP A (CIVIL & ELECTRICAL)

2. ELECTRICAL ENGINEERING PRACTICES 15

GROUP B (MECHANICAL AND ELECTRONICS) 15

4. ELECTRONIC ENGINEERING PRACTICES 15

UNIT I ANALYTICAL READING 12

UNIT III DESCRIBING VISUAL MATERIAL 12

UNIT IV WRITING/ E-MAILING THE JOB APPLICATION 12

UNIT V REPORT WRITING 12

UNIT IV COMPLEX INTEGRATION 12

GE7151 COMPUTING TECHNIQUES L T P C