Quick TalkTM TC1901

Fiber Telephone/Analog Extender

Extend Telephone or 2/4-Wire Analog
600 Link with Fiber
PBX and Key System Compatible
Voice Bandwidth from 300Hz to 3.4Khz
for Toll Quality Sound
Built-In Dry Contact Relay for External
Alarm and Ringer Connection
12VDC Power Supply, Optional 24VDC, TC1901S Standalone/Wallmount Unit
-48VDC, 125VDC, or 115/230VAC with (Telephone set sold separately)
Power Adapter
Built-In Power Redundancy
Rackmount or Standalone
Hi Temp or Extreme Temp Options
Tested & Compatible with: 2 X TC1901
(Housed in TCRM195 19 Rackmount Card Cage)

TALK A PHONE
Creating Communications Solutions

T he TC1901 Quick-Talk Telephone/Analog Fiber Extender can turn

a fiber optic network into a voice network simply by plugging a
telephone set into an RJ-11 connector. It is compatible with most 2-wire
analog PBXs or Key Systems.
Quick-Talk is typically used to extend phone service or 2/4-Wire analog
600 links to remote sites over a fiber optic circuit. For example, a user Applications
can extend a secured phone link (for telephone, fax or dial-up modem) The TC1901 is often used to extend
to a remote site via the fiber optic up to 80 Km away. telephone/analog service in campus
Quick-Talk provides 2-wire FXS (foreign exchange subscriber) on the networks, power plants, substations,
telephone side with ring down capability and FXO (foreign exchange etc or use an existing service data
office) on the PBX side. When both sides are set to FXS, a hot link can channel to set up a telephone/analog
be established; when one side lifts up the handset, the other side starts link. It is also used to set up hot
ringing. telephone service via fiber optic
networks. Other applications include
Available in standalone or rackmount versions, the TC1901 is
taking advantage of the inherent
compatible with all popular types and sizes of fiber optic cable.
benefits of fiber optics to reduce noise/
Diagnostic aids include 19 diagnostic LEDs for indicating power, ring,
EMI or maximize security/isolation.
FXS, FXO, and audio activity.
The optical interface is multimode (850/1300nm) or single mode
(1300/1550nm) with ST or SC connectors. A local dry contact relay is also
provided for external alarm and ringer connection.
Power is 12VDC, optional 24VDC, -48VDC, 125VDC or 115/230VAC
with an external power cube. Power redundancy is standard. Electrical
connectors are RJ-11 Female for the telephone set. A local dry contact
relay alarm is also provided. TC Communications, Inc.
17881 Cartwright Rd. Irvine, CA 92614 U.S.A.
Tel: (949) 852-1972, Fax: (949) 852-1948
Sales: (800) 569-4736
Web Site: www.tccomm.com
E-mail: [email protected]
 PUBLIC
SWITCH
PSTN TC1910
TELEPHONE NETWORK 2-Wire Analog
NETWORK OPERATION UTP FXS
TC1901 TC1901
CENTER
Telephone
2-wire SUBSTATION
2-wire
Telephone 10/100M Telephone
(FXO) Ethernet LAN (FXS)
2-Wire Analog UTP
PBX or Key System
FXO
Up to 80km, Single Mode
PBX or TC1910
Multimode or Single Mode
Key System Fiber Optic Cables

Typical Point-to-Point Application Using TC1901s to Extend Telephone via Fiber Optic Cables

SUBSTATION

TC1910
TC1901 TC1901 2-Wire Analog
NETWORK
UTP FXS
OPERATION
2-wire 2-wire
Telephone
CENTER Telephone
To Use: Lift Handset
(FXS) to(FXS)
Ring Remote Site
10/100M
To Use: Lift Handset Ethernet LAN To Use: Lift Handset
2-Wire
to Ring Analog
Remote site UTP Up to 80km, Single Mode to Ring Remote site
FXS
Multimode or Single Mode
To Use: Lift Handset TC1910 Fiber Optic Cables
to Ring Remote Site
Typical Application Using TC1901s to Establish a Hot Link via Fiber Optic Cables

Audio Bandwidth Visual Indicators

.................................300Hz to 3.4Khz Tx and Rx volume, Local off-hook,
Single Level (2/4-Wire 600) Remote off-hook, FXO, FXS, Ring,
Input Range................-1.5 to -40dBm Optic Rx, Electric Rx, VccA, VccB,
SNR....................................32 to 36dB PWR A, PWR B
Optical Alarm/Ring
Transmitter.........................LED/ELED Dry Contact..................Normal OPEN
Receiver .............................PIN Diode Power
Wavelength Standard....................12VDC @500mA
................850nm/1300nm Multimode Optional....24VDC, -48VDC, 125VDC or
...........1300nm/1550nm Single Mode ..........115/230VAC with power cube
Fiber Optic Connectors Temperature
...............................ST, Optional FC** Operating.....................10C to 50C
Loss Budget* - 850/1300/1550nm Hi-Temp (optional)......20C to 70C #1045959
Multimode @62.5/125m.........15dB Extreme (optional)......40C to 80C
TC Communications, Inc.
Single Mode @9/125m...........20dB Storage.........................40C to 90C 17881 Cartwright Road
Electrical Humidity............95% non-condensing Irvine, CA 92614 U.S.A.
Phone Connector............RJ11 Female Physical (Standalone Unit) Factory Tel: (949) 852-1972
Ring Voltage...............55Vrms at 25Hz Height......................(3.53 cm) 1.39 Fax: (949) 852-1948
(Depending on the ringing load) Width.......................(18.14 cm) 7.2
FXO Impedance...........................600 Depth.......................(24.89 cm) 9.8 Sales Office
FXS Impedance...........................600 Weight.....................(907 gm) 2.0 lbs U.S.A. Domestic International:
*Contact factory for higher requirements (800) 569-4736 (949) 852-1973
**FC is not available @850nm Multimode
Web Site: www.tccomm.com
E-mail: [email protected]
Note: Information contained in this data sheet is subject to change without prior notice.
DTS-19010-01-02
Rev. 040114