Auto

SATHYABAMA UNIVERSITY
(Established under section 3 of UGC Act, 1956)

Jeppiaar Nagar, Rajiv Gandhi Salai, Chennai - 119.
SYLLABUS
BACHELOR OF ENGINEERING PROGRAMME
IN
AUTOMOBILE ENGINEERING (8 SEMESTERS)
REGULATIONS 2010
SATHYABAMA UNIVERSITY FACULTY OF MECHANICAL ENGINEERING
SATHYABAMA UNIVERSITY
REGULATIONS 2010
Effective from the academic year 2010-2011 and applicable to the students admitted to the Degree of Bachelor
of Engineering / Technology. (Eight Semesters)
1. Structure of Programme
1.1 Every Programme will have a curriculum with syllabi consisting of theory and practical such as:
(i) General core courses comprising Mathematics, Basic Sciences, Engineering Sciences.
(ii) Core course of Engineering / Technology.
(iii) Elective course for specialization in related fields.
(iv) Workshop practice, Computer Practice, Engineering Graphics, Laboratory Work, Industrial
Training, Seminar Presentation, Project Work, Educational Tours, Camps etc.
1.2 Each semester curriculum shall normally have a blend of lecture courses not exceeding 7 and
practical courses not exceeding 4.
1.3 The medium of instruction, examinations and project report will be in English.
2. Duration of the Programme
A student is normally expected to complete the B.E/B.Tech. Programme in 8 semesters but in any case not
more than 12 consecutive semesters from the time of commencement of the course (not more than 10
semesters for those who join 3rd semester under Lateral entry system) The Head of the Department shall
ensure that every teacher imparts instruction as per the number of hours specified in the syllabus and that the
teacher teaches the full content of the specified syllabus for the course being taught.
3. Requirements for Completion of a Semester
A candidate who has fulfilled the following conditions shall be deemed to have satisfied the requirement for
completion of a semester.
3.1 He/She secures not less than 90% of overall attendance in that semester.
3.2 Candidates who do not have the requisite attendance for the semester will not be permitted to write
the University Exams.
4. Examinations
The examinations shall normally be conducted between October and December during the odd semesters and
between March and May in the even semesters. The maximum marks for each theory and practical course
(including the project work and Viva Voce examination in the Eighth Semester) shall be 100 with the following
breakup.
(i) Theory Courses

Internal Assessment : 20 Marks
University Exams : 80 Marks
(ii) Practical Courses
Internal Assessment : - -
University Exams : 100 Marks
B.E. (AUTOMOBILE ENGINEERING) i REGULATIONS 2010

5. Passing requirements
(i) A candidate who secures not less than 50% of total marks prescribed for the course (For all courses
including Theory, Practicals and Project work) with a minimum of 35 marks out of 80 in the University
Theory Examinations, shall be declared to have passed in the Examination.
(ii) If a candidate fails to secure a Pass in a particular course, it is mandatory that he/she shall reappear
for the examination in that course during the next semester when examination is conducted in that
course. However the Internal Assessment marks obtained by the candidate in the first attempt shall
be retained and considered valid for all subsequent attempts.
6. Eligibility for the Award of Degree
A student shall be declared to be eligible for the award of the B.E/B.Tech. degree provided the student has
successfully completed the course requirements and has passed all the prescribed examinations in all the 8
semesters within the maximum period specified in clause 2.
7. Award of Credits and Grades
All assessments of a course will be done on absolute marks basis. However, for the purpose of reporting the
performance of a candidate, Letter Grades will be awarded as per the range of total marks (out of 100) obtained
by the candidate as given below:
RANGE OF MARKS FOR GRADES

Range of Marks Grade Grade Points (GP)
90-100 A++ 10
80-89 A+ 9
70-79 B++ 8
60-69 B+ 7
50-59 C 6
00-49 F 0
ABSENT W 0
CUMULATIVE GRADE POINT AVERAGE CALCULATION

The CGPA calculation on a 10 scale basis is used to describe the overall performance of a student in
all courses from first semester to the last semester. F and W grades will be excluded for calculating
GPA and CGPA.
i C i GPi
CGPA =
i C i
where Ci - Credits for the subject
GP i - Grade Point for the subject
i - Sum of all subjects successfully cleared during all the semesters
8. Classification of the Degree Awarded

1. A candidate who qualifies for the award of the Degree having passed the examination in all the
courses of all the semesters in his/her first appearance within a maximum period of 8 consecutive
semesters after commencement of study (maximum of 6 semesters for Lateral entry system who
join the course in the third semester) securing a CGPA not less than 9.0 shall be declared to
have passed the examination in First Class Exemplary.
B.E. (AUTOMOBILE ENGINEERING) ii REGULATIONS 2010

courses of all the semesters in his/her first appearance within a maximum period of 8 consecutive
semesters after commencement of study (maximum of 6 semesters for Lateral entry system who
join the course in the third semester) securing a CGPA not less than 7.5 shall be declared to
have passed the examination in First Class with Distinction.
courses of all the semesters within a maximum period of 8 consecutive semesters after
commencement of study (maximum of 6 semesters for Lateral entry system who join the course in
the third semester) securing a CGPA not less than 6.0 shall be declared to have passed the
examination in First Class.
4. All other candidates who qualify for the award of the Degree having passed the examination in all
the courses of all the 8 semesters within a maximum period of 12 consecutive semesters (10
consecutive semesters for Lateral Entry system who join the course in the third semester) after
his/her commencement of study securing a CGPA not less than 5.0 shall be declared to have
passed the examination in Second Class.
5. A candidate who is absent in semester examination in a course/project work after having registered
for the same, shall be considered to have appeared in that examination for the purpose of
classification of degree. For all the above mentioned classification of Degree, the break of study
during the programme, will be counted for the purpose of classification of degree.
6. A candidate can apply for revaluation of his/her semester examination answer paper in a theory
course, within 1 week from the declaration of results, on payment of a prescribed fee along with
prescribed application to the Controller of Examinations through the Head of Department. The
Controller of Examination will arrange for the revaluation and the result will be intimated to the
candidate concerned through the Head of the Department. Revaluation is not permitted for practical
courses and for project work.
Final Degree is awarded based on the following:
CGPA 9.0 - First Class - Exemplary
CGPA 7.50 < 9.0 - First Class with Distinction
CGPA 6.00 < 7.50 - First Class
CGPA 5.00 < 6.00 - Second Class
Minimum CGPA requirements for award of Degree is 5.0 CGPA.
9. Discipline
Every student is required to observe disciplined and decorous behaviour both inside and outside the University
and not to indulge in any activity which will tend to bring down the prestige of the University. If a student
indulges in malpractice in any of the University theory / practical examination, he/she shall be liable for punitive
action as prescribed by the University from time to time.
10. Revision of Regulations and Curriculum
The University may revise, amend or change the regulations, scheme of examinations and syllabi from time to
time, if found necessary.
B.E. (AUTOMOBILE ENGINEERING) iii REGULATIONS 2010

B.E. - AUTOMOBILE ENGINEERING

REGULATIONS 2010 - CURRICULUM
LIST OF SUBJECTS
SEMESTER I
Sl. No. SUBJECT CODE SUBJECT TITLE L T P C Page No.
1 SMTX1001 Engineering Mathematics I 3 1 0 4 1
2 SCHX1001 Environmental Science and Engineering 3 0 0 3 2
3 SPHX1001 Physics of Materials 3 0 0 3 3
4 SCYX1001 Engineering Chemistry 3 0 0 3 4
5 SCSX1002 Programming In C 3 0 0 3 5
6 SMEX1001 Engineering Graphics 1 2 0 3 6
7 SMEX1002 Engineering Mechanics 2 1 0 3 7
PRACTICALS
1 SPRX4002 CAD Lab I 0 0 4 2 8
2 SCSX4002 Programming In C Lab 0 0 4 2 8
TOTAL CREDITS 26
SEMESTER II
1 SHSX1001 English for Science and Technology 3 0 0 3 9
2 SMTX1002 Engineering Mathematics II 3 1 0 4 10
3 SPHX1002 Applied Physics 3 0 0 3 11
4 SCYX1003 Chemistry of Industrial Materials 3 0 0 3 12
5 SCSX1003 Programming in C++ 3 0 0 3 13
6 SEEX1002 Basic Electrical and Electronics Engineering 3 0 0 3 14
7 SPRX1001 Basic Mechanical and Civil Engineering 3 0 0 3 15
PRACTICALS
1 SPRX4001 Mechanical Workshop Lab 0 0 4 2 16
2 SCSX4007 Programming in C++ Lab 0 0 4 2 16
TOTAL CREDITS 26
L - Lecture hours; T - Tutorial hours; P - Practical hours; C - Credits
B.E. (AUTOMOBILE ENGINEERING) iv REGULATIONS 2010

SEMESTER III
1 SMTX 1009 Engineering Mathematics III 3 1 0 4 17
2 SMEX 1003 Kinematics of Machines 2 1 0 3 18
3 SMEX 1004 Engineering Thermodynamics 2 1 0 3 19
4 SMEX 1005 Fluid Mechanics and Machinery 2 1 0 3 20
5 SMEX 1006 Machine Drawing 1 2 0 3 21
6 SAUX 1001 Automotive Petrol Engines 3 0 0 3 22
7 SAUX 1002 Fuels and Lubricants 3 0 0 3 23
PRACTICALS
1 SMEX 4006 Fluid Mechanics and Machinery Lab 0 0 4 2 24
2 SAUX 4001 Fuels and Lubricants and Engine Testing 0 0 4 2 25

Lab
TOTAL CREDITS 26
SEMESTER IV
1 SMTX 1010 Engineering Mathematics IV 3 1 0 4 26
2 SMEX 1008 Dynamics of Machinery 3 1 0 4 27
3 SMEX 1009 Thermal Engineering 3 1 0 4 28
4 SMEX 1010 Strength of Materials 2 1 0 3 29
5 SECX 1011 Microprocessor and Microcontroller 3 0 0 3 30
6 SAUX 1003 Automotive Diesel Engines 3 0 0 3 31
PRACTICALS
1 SMEX 4008 Material Testing Lab 0 0 4 2 32
2 SECX 4014 Electronics and Microprocessor Lab 0 0 4 2 32
TOTAL CREDITS 25
B.E. (AUTOMOBILE ENGINEERING) v REGULATIONS 2010

SEMESTER V
1 SMTX 1011 Applied Numerical Methods 3 1 0 4 33
2 SPRX 1044 Measurements and Metrology 3 0 0 3 34
3 SMEX 1006 Material Technology 3 0 0 3 35
4 SAUX 1004 Automotive Electrical and Electronics 3 0 0 3 36
5 SAUX 1005 Automotive Engine Components Design 3 1 0 4 37
6 SAUX 1006 Automotive Chassis 3 0 0 3 38
7 SAUX 1007 Vehicle Dynamics 3 0 0 3 39
PRACTICALS
1 SAUX 4002 Automotive Engine Components Lab and 0 0 4 2 40

Automotive Chassis Components Lab
2 SAUX 4003 Automotive Electrical and Electronics Lab 0 0 4 2 40
TOTAL CREDITS 27
SEMESTER VI
1 SMEX 1017 Resource Management Techniques 3 0 0 3 41
2 SAUX 1008 Vehicle Maintenance 3 0 0 3 42
3 SAUX 1009 Automotive Pollution and Control 3 0 0 3 43
4 SAUX 1010 Automotive Transmission 3 0 0 3 44
5 Elective I 3 0 0 3
6 Elective II 3 0 0 3
PRACTICALS
1 SAUX 4004 Vehicle Maintenance Lab 0 0 4 2 45
2 SAUX 4005 Two Wheeler and Three Wheeler Lab 0 0 4 2 45
TOTAL CREDITS 22
B.E. (AUTOMOBILE ENGINEERING) vi REGULATIONS 2010

SEMESTER VII
1 SAUX 1011 Automotive Chassis Design 3 1 0 4 46
2 SAUX 1012 Vehicle Body Engineering 3 0 0 3 47
3 SMEX 1021 Total Quality Management 3 0 0 3 48
4 SAUX 1013 Heat Transfer Applied to I.C.Engines 3 1 0 4 49
5 Elective III 3 0 0 3
6 Elective IV 3 0 0 3
PRACTICALS
1 SAUX 4006 Vehicle Reconditioning Lab 0 0 2 1 50
2 SAUX 4007 Computer Aided Engine Design and Chassis 0 0 2 1 50

Design Lab
TOTAL CREDITS 22
SEMESTER VIII
1 SBAX 1001 Principles of Management and Professional 3 0 0 3 51

Ethics
2 SPRX1007 CAD/CAM 3 0 0 3 52
3 SAUX 1014 Vehicle Design Characteristics 3 0 0 3 53
PRACTICALS
1 SAUX 4008 Modeling and Analysis of Engine 0 0 2 1 54

components Lab
2 SAUX 4009 Computer Aided Manufacturing Lab 0 0 2 1 54
3 S86XPROJ Project Work and Viva Voce 0 0 30 15 54
TOTAL CREDITS 26
TOTAL CREDITS FOR THE COURSE 200
B.E. (AUTOMOBILE ENGINEERING) vii REGULATIONS 2010

LIST OF ELECTIVE SUBJECTS

Note: ONE SUBJECT IS TO BE CHOSEN FROM EACH GROUP COMPULSORILY
GROUP I: AUTOMOBILE ENGINEERING

1 SAUX1015 Automotive Air Conditioning 3 0 0 3 55
2 SAUX1016 Alternate Fuels and Energy Systems 3 0 0 3 56
3 SAUX1017 Vibration and Noise Control in Automobiles 3 0 0 3 57
4 SAUX1019 Two and Three Wheeled Vehicles 3 0 0 3 58
5 SAUX1022 Modern Automobile Accessories 3 0 0 3 59
6 SAUX1023 Fuel Cell and Applications 3 0 0 3 60
7 SAUX1024 Off Road Vehicles 3 0 0 3 61
8 SMEX1024 Advanced Internal Combustion Engineering 3 0 0 3 62
9 SMEX1027 Combustion Engineering 3 0 0 3 63
GROUP II: MANAGEMENT
1 SAUX1020 Transport Management 3 0 0 3 64

2 SMEX1034 Solid Waste Management 3 0 0 3 65
3 SMEX1035 Energy Engineering and Management 3 0 0 3 66
4 SMEX1040 Industrial Handling and Storage Systems 3 0 0 3 67
GROUP III: ADVANCED DESIGN
1 SMEX1038 Computational Fluid Dynamics 3 0 0 3 68

2 SMEX1039 Finite Element Analysis 3 0 0 3 69
3 SMEX1031 Design of Heat Transfer Equipment 3 0 0 3 70
4 SAUX1018 Automotive Aerodynamics 3 0 0 3 71
GROUPIV: ADVANCED TECHNOLOGY
1 SPRX1019 Industrial Robotics and Applications 3 0 0 3 72

2 SMEX1041 Artificial Intelligence and Expert Systems 3 0 0 3 73
3 SAUX1021 Automotive Safety 3 0 0 3 74
4 SMEX1030 Bio Energy Conversion Technologies 3 0 0 3 75
B.E. (AUTOMOBILE ENGINEERING) viii REGULATIONS 2010

DUAL DEGREE IN COMPUTER SCIENCE
Provision for candidates from Non-IT Branches of B.E/B.Tech to undergo Dual Degree Programme leading to
B.E in Computer Science.
A. Duration and Curriculum

Candidates selected for a Dual degree programme shall undergo additional courses pertaining to Computer
Science. These courses constitute with additional Curriculum as per annexure and consist of both core course
and electives. The additional courses are to be undergone concurrently from the 3rd semester of the B.E/B.Tech.
(Non-IT) degree programme and extends for one more year beyond the fourth year of the regular B.E/B.Tech.
(Non-IT) degree programme to which he/she was first admitted. The additional courses are to be offered from
3rd to 8th Semester after normal working hours so that the regular B.E/B.Tech. (NonIT) remains unaffected.
B. A candidate undergoing dual degree programme should satisfy minimum attendance requirements for the course
of additional Curriculum for each semester, as stipulated for the regular B.E/B.Tech. Degree Programme.
C. For the courses of additional Curriculum, a candidate has to write the same examination that is held for the
regular B.E. Computer Science.
D. The passing rules for the dual degree programme shall be same as that of the regular B.E/B.Tech. Degree
programme.
E. A candidate shall be declared to be eligible for the additional degree of B.E. Computer Science provided that
(i) The candidate has qualified for the regular B.E. or B.Tech. Degree in the non-IT branch in which
he/she was originally admitted.
(ii) The candidate has successfully completed all the courses prescribed in the additional Curriculum
within a maximum period of 12 semesters from the date of first admission.
(iii) There is no disciplinary action pending against the student.
B.E. (AUTOMOBILE ENGINEERING) ix REGULATIONS 2010

CURRICULUM
SUBJECTS FOR DUAL DEGREE PROGRAMME IN COMPUTER SCIENCE
THIRD SEMESTER
Sl.No. SUBJECT CODE NAME OF THE SUBJECT L T P C

THEORY
1 SCSX1004 Software Engineering 3 0 0 3
2 SCSX1005 Data Structures & Algorithms 3 1 0 4
PRACTICALS
3 SCSX4004 Data Structures Lab 0 0 4 2
TOTAL CREDITS 9
FOURTH SEMESTER
THEORY
1 SCSX1007 Java Programming 3 0 0 3
2 SCSX1009 Computer Architecture & Organization 3 0 0 3
PRACTICALS
3 SCSX4005 Java Programming Lab 0 0 4 2
TOTAL CREDITS 8
FIFTH SEMESTER
THEORY
1 SCSX1017 Data Communication and Computer 3 1 0 4
Networks
2 SCSX1018 Database Systems 3 1 0 4
PRACTICALS
3 SCSX4011 RDBMS Lab 0 0 4 2
TOTAL CREDITS 10
SIXTH SEMESTER
THEORY
1 SCSX1019 System Programming 3 0 0 3
2 SCSX1022 J2EE 3 0 0 3
PRACTICALS
3 SCSX4010 System Programming Lab 0 0 4 2
TOTAL CREDITS 8
B.E. (AUTOMOBILE ENGINEERING) x REGULATIONS 2010

SEVENTH SEMESTER
THEORY
1 SCSX1008 C# and .Net 0 0 0 3
2 SCSX1011 Operating System 3 1 0 4
PRACTICALS
3 SCSX4006 C# and .Net Lab 0 0 4 2
TOTAL CREDITS 9
EIGHTH SEMESTER
THEORY
1 SCSX1024 Network Programming & Management 3 0 0 3
2 Elective I 3 0 0 3
3 Elective II 3 0 0 3
PRACTICALS
4 SCSX4012 Network Programming Lab 0 0 4 2
TOTAL CREDITS 11
NINETH SEMESTER
THEORY
1 SCSX1023 Computer Graphics & Multimedia 3 0 0 3
Systems
2 SCSX1030 Datamining & Warehousing 3 0 0 3
3 SCSX1025 Wireless & Mobile Networks 3 0 0 3
4 SCSX1027 Hardware Peripherals and Interfacing 3 0 0 3
5 Elective III 3 0 0 3
6 Elective IV 3 0 0 3
PRACTICALS
7 SCSX4014 Hardware Peripherals Lab 0 0 4 2
8 SCSX4015 Case Tools & Testing Lab 0 0 4 2
TOTAL CREDITS 22
TENTH SEMESTER
1 S11XPROJ Project Work and Viva-Voce 0 0 30 15

TOTAL CREDITS 15
TOTAL COURSE CREDITS : 92
B.E. (AUTOMOBILE ENGINEERING) xi REGULATIONS 2010

ELECTIVES FOR DUAL DEGREE PROGRAMME IN COMPUTER SCIENCE
Sl.No. SUBJECT CODE NAME OF THE SUBJECT L T P C
1. SCSX1020 Component Based Technology 3 0 0 3
2. SCSX1026 Cryptography & Network Security 3 0 0 3
3. SCSX1028 Distributed Computing 3 0 0 3
4. SCSX1032 Management Information System 3 0 0 3
5. SCSX1036 FOSS 3 0 0 3
6. SCSX1038 Software Quality Assurance and Testing 3 0 0 3
7. SCSX1039 Unified Modeling Language 3 0 0 3
8. SCSX1042 Robotics 3 0 0 3
9. SCSX1043 Unix Internals 3 0 0 3
10. SCSX1044 Multicore Programming 3 0 0 3
11. SCSX1047 High Performance Network 3 0 0 3
12. SCSX1048 Grid Computing 3 0 0 3
13. SCSX1049 Client Server Architecture 3 0 0 3
14. SCSX1050 TCP/IP and Socket Programming 3 0 0 3
15. SCSX1057 Cloud Computing 3 0 0 3
B.E. (AUTOMOBILE ENGINEERING) xii REGULATIONS 2010

ENGINEERING MATHEMATICS I L T P Credits Total Marks

SMTX1001
(Common to all branches except Bio Groups) 3 1 0 4 100
UNIT I TRIGONOMETRY 10 hrs.

Review of Complex numbers and De Moivres Theorem. Expansions of Sinn and Cosn; Sin and Cos in
powers of , Sinn and Cosn in terms of multiples of . Hyperbolic functions Inverse hyperbolic functions. Separation
into real and imaginary parts of complex functions
UNIT II MATRICES 10 hrs.

Characteristic equation of a square matrix - Eigen values and Eigen vectors of a real matrix- properties of Eigen
values and Eigen vectors, Cayley-Hamilton theorem (without proof) verification Finding inverse and power of a matrix.
Diagonalisation of a matrix using similarity transformation (concept only) , Orthogonal transformation Reduction of
quadratic form to canonical form by orthogonal transformation.
UNIT III GEOMETRICAL APPLICATIONS OF DIFFERENTIAL CALCULUS 10 hrs.

Curvature centre, radius and circle of curvature in Cartesian co-ordinates only Involutes and evolutes
envelope of family of curves with one and two parameters properties of envelopes and evolutes evolutes as
envelope of normal.
UNIT IV FUNCTIONS OF SEVERAL VARIABLES 10 hrs.

Functions of two variables partial derivatives Eulers theorem and problems - Total differential Taylors
expansion Maxima and minima Constrained maxima and minima Lagranges multiplier method Jacobian
Differentiation under integral sign.
UNIT V ORDINARY DIFFERENTIAL EQUATION 10 hrs.

ax
Second order linear differential equation with constant coefficients Particular Integrals for e , sin ax, cos ax,
xn, xneax, eax sinbx, eax cos bx. Equations reducible to Linear equations with constant co-efficient using x=et.
Simultaneous first order linear equations with constant coefficients - Method of Variations of Parameters.
TEXT / REFERENCE BOOKS:

1. Veerarajan. T , Engineering Mathematics for First Year, Tata McGraw Hill Publishers ,II Edition ,2008.
2 Kandaswamy.P. & co., Engineering Mathematics for First Year, S.Chand & Co Pub., IX revised edition, 2010.
3 Moorthy M.B.K, Senthilvadivu. K ,Engineering Mathematics-I, VRB Pub., Revised Edition, 2010.
4. Arumugam. S & co. Engineering Mathematics Vol-I, SciTech Pub., Revised Edition, 2010.
5. Venkataraman M.K.,Engineering Mathematics First Year (2nd edition), National Publishing Co., 2000.
UNIVERSITY EXAM QUESTION PAPER PATTERN

Max Marks : 80 Exam Duration : 3 hrs.
PART A : 2 Questions from each unit, each carrying 2 marks 20 marks
PART B : 2 Questions from each unit with internal choice, each carrying 12 marks 60 marks
B.E. (AUTOMOBILE ENGINEERING) 1 REGULATIONS 2010

ENVIRONMENTAL SCIENCE AND ENGINEERING L T P Credits Total Marks

SCHX1001
(Common to All Branches) 3 0 0 3 100
UNIT I INTRODUCTION TO ENVIRONMENTAL STUDIES AND NATURAL RESOURCES 12 hrs.

Definition, scope and importance - need for public awareness - forest resources: use and over-exploitation,
deforestation, case studies. Timber extraction, mining, dams, floods, drought, conflicts over water, dams-benefits and
problems - mineral resources: use effects on forests and tribal people - water resources: use and over-utilization of
surface and ground water - exploitation, environmental effects of extracting and using mineral resources, case studies
- food resources: world food problems, changes caused by agriculture and overgrazing, effects of modern agriculture,
fertilizer-pesticide problems, water logging, salinity, case studies - energy resources: growing energy needs, renewable
and non renewable energy sources, use of alternate energy sources. Case studies - land resources: land as a resource,
land degradation, man induced landslides, soil erosion and desertification - role of an individual in conservation of
natural resources - equitable use of resources for sustainable lifestyles.
UNIT II ECOSYSTEMS AND BIODIVERSITY 12 hrs.
Concept of an ecosystem - structure and function of an ecosystem - producers, consumers and decomposers
- energy flow in the ecosystem - ecological succession - food chains, food webs and ecological pyramids - introduction,
types, characteristic features, structure and function of the (a) forest ecosystem (b) grassland ecosystem (c) desert
ecosystem (d) aquatic ecosystems (ponds, streams, lakes, rivers, oceans, estuaries) - introduction to biodiversity -
definition: genetic, species and ecosystem diversity - biogeographical classification of India - value of biodiversity:
consumptive use, productive use, social, ethical, aesthetic and option values - biodiversity at global, national and local
levels - India as a mega-diversity nation - hot-spots of biodiversity - threats to biodiversity: habitat loss, poaching of
wildlife, man-wildlife conflicts - endangered and endemic species of India - conservation of biodiversity: in-situ and
ex-situ conservation of biodiversity.
UNIT III ENVIRONMENTAL POLLUTION 10 hrs.
Definition - causes, effects and control measures of: (a) air pollution (b) water pollution (c) soil pollution (d)
marine pollution (e) noise pollution (f) thermal pollution (g) nuclear hazards - solid waste management: causes, effects
and control measures of urban and industrial wastes - role of an individual in prevention of pollution - pollution case
studies - disaster management: floods, earthquake, cyclone and landslides.
UNIT IV SOCIAL ISSUES AND THE ENVIRONMENT 8 hrs.
From unsustainable to sustainable development - urban problems related to energy - water conservation, rain
water harvesting, watershed management - resettlement and rehabilitation of people; its problems and concerns, case
studies - environmental ethics: issues and possible solutions - climate change, global warming, acid rain, ozone layer
depletion, nuclear accidents and holocaust, case studies. - wasteland reclamation - consumerism and waste products
- environment protection act - air (prevention and control of pollution) act - water (prevention and control of pollution)
act - wildlife protection act - forest conservation act - issues involved in enforcement of environmental legislation -
public awareness.
UNIT V HUMAN POPULATION AND THE ENVIRONMENT 8 hrs.
Population growth, variation among nations - population explosion - family welfare programme - environment
and human health - human rights - value education - HIV / AIDS - women and child welfare - role of information
technology in environment and human health - case studies.
Visit to a local area to document environmental assets-river/forest/grassland/hill/mountain. Visit to a local polluted
site-urban/rural/ industrial/agricultural-study of common plants, insects, birds-study of simple ecosystems-pond, river, hill
slopes etc.
TEXTBOOK / REFERENCE BOOKS:
1. Meenakshi.P, Elements of Environmental Science and Engineering, 1st edition, PHI New Delhi, 2009.
2. Ravikrishnan. A, Environmental Science & Engineering, 3rdedition, Sri Krishna Publications, Chennai.
3. Wrigh.R.T & Nebel B.J, Environmental science-towards a sustainable future by Richard 8th edition, prentice hall of India, Newdelhi
4. Erach Bharucha ,Text Book of Environmental Studies, University Press, Chennai.
5. Anjanayelu.Y, Introduction to Environmental Engineering, B.S.Publications.
UNIVERSITY EXAM QUESTION PAPER PATTERN:

Max. Marks: 80 Exam Duration: 3 hrs.

PHYSICS OF MATERIALS L T P Credits Total Marks

SPHX1001
(Common to all Branches of B.E / B.Tech) 3 0 0 3 100
UNIT I CONDUCTING AND SUPERCONDUCTING MATERIALS 10 hrs.

Classical Free electron theory of Metals-Derivation of Electrical and Thermal Conductivity- Deduction of
Wiedemann Franz law-Lorentz number. Introduction to Band theory, Difference between Conductors, Semiconductors
and Insulators - Superconductivity-Transition temperature - occurrence of superconductivity - BCS Theory(Qualitative),
properties of superconductors -Type I &Type II superconductors, High Tc superconductors, AC & DC Josephson effects.
Applications of superconductors basic concepts of SQUID, cryotron, magnetic levitation.
UNIT II MAGNETIC AND DIELECTRIC MATERIALS 10 hrs.
Types based on spin. Hard and soft magnetic materials, domain theory of Ferromagnetism, magnetic bubbles,
formation and propagation of magnetic bubbles, applications of magnetic materials - Magnetic storage devices. Dielectric
parameters, polarization, polarisability, types of polarization. Internal or local electric field - derivation of Lorentz Equation
and Clausius - Mossotti Equation, dielectric loss and breakdown, types of dielectric breakdown, types of dielectric
materials, applications.
UNIT III OPTICAL MATERIALS 10 hrs.
Optical processes and Excitons - types, Traps - Trapping and recombination, types, Point defects Frenkel and
Schottky defects - Colour centers - types and their mechanisms, Luminescence - Photoluminescence - Types-
Fluorescence and Phosphorescence- Mechanism and its applications, Cathodoluminescence, Electroluminescence.
Non-linear Optical Materials Basic Principle, Classifications, Properties - Frequency Doubling or Tripling, Optical Mixing
- Applications.
UNIT IV MODERN ENGINEERING MATERIALS 10 hrs.
Metals and alloys steel and its properties - Iron-carbon phase diagram, Titanium and Aluminium based alloys
- Introduction, properties and Applications. Shape Memory Alloys (SMA) - Principle of shape memory effects, Hysteresis
curve, Two way shape memory alloys, super-elasticity and thermo-mechanical behavior. Characterization methods to
identify the phase transformation of SMA, commercial SMA Ni-Ti alloys, copper alloys and Cu-Al alloys, Applications.
Ceramics Classification, Properties, fabrication, advanced ceramics and applications. Composites particle reinforced
composites and fiber reinforced composites processing and applications.
UNIT V CHARACTERIZATION OF MATERIALS 10 hrs.
Structural characterization X-ray diffraction, electron diffraction and neutron diffraction Determination of crystal
structure. Difference among these diffraction techniques.Micro structural characterization optical microscope, scanning
electron microscope, transmission electron microscope, atomic force microscopy, micro and nano hardness testing
principle and applications.
REFERENCE BOOKS :
1. Ragavan.V, Material science and Engineerimg, 5th Edition, Eastern Eco, 2004.
2. Suresh.R and Jayakumar.V, Materials Science, 1 st Edition, Lakshmi Publication, 2003.
3. Wilson.J and Hawkes.J.F.B, Optoelectronics- An Introduction, 2 nd Edition, Prentice-Hall of India, 2001.
4. Dr.Arumugam M., Semiconductor Physics and Opto electronics, 1st Edition, Anuradha Publishers, 2003.
5. Gaur.R.K and Gupta.S.L, Engineering Physics, 8 th Edition, Dhanbat Rai Publications,2007.
6. Palanisamy.P.K, Engineering Physics, 1 st Edition, SCITECH Publications, 2007.
7. Sankar.B.N and Pillai.S.O, A text book of Engineering Physics, 1 st Edition, New Age international Publishers, 2007.
8. Rajendran.V, Engineering Physics, 2nd Edition, Tata McGraw-Hill, 2008.
9. Avadhanulu.M.N and P.G. Kshirsagar.P.G, Engineering Physics, 2 nd Edition, S. Chand & Company, 2007.
10. Dr. Arumugam M., Engineering Physics, 2nd Edition, Anuradha Publications, 2002.
11. William D.Callister,Jr, Materials Science and Engineering An introduction, 6 th Edition, John-Wiley and Sons,2004.
12. Cullity.B.D, Principles of X-ray diffraction, 3 rd Edition, Prentice Hall, 2001

Out of 20 marks, maximum of 10% problems may be asked.
Out of 60 marks, maximum of 10% problems may be asked
Applications mentioned in the syllabus refer to the basic applications and not to any specific case.

ENGINEERING CHEMISTRY L T P Credits Total Marks

SCYX1001
UNIT I WATER TECHNOLOGY 10 hrs.

Introduction: Impurities present in water, Hardness: Types of hardness, Expression, Units. Estimation of hardness
by EDTA method, Problems. Boiler Troubles: Sludge & Scales, Boiler Corrosion. Water Softening: Zeolite process,
Demineralization process, Merits and Demerits. Reverse osmosis, Merits and Demerits. Domestic water treatment: Flow
chart diagram only.
UNIT II BATTERIES AND FUEL CELLS 10 hrs.
Introduction - Battery terminology: Primary cells, Secondary batteries, Charging and Discharging characteristics,
Capacity, Energy density, Cycle life, Internal resistance. Secondary batteries: Lead-acid accumulator, Nickel-cadmium
batteries , Lithium primary cells: Lithium-thionyl chloride cell, Lithium-iodine cell. Lithium secondary batteries: Lithium-ion
batteries. Fuel cells: Hydrogen-Oxygen fuel cell, Solid oxide fuel cell (SOFC): Principle, construction, anode cathode
and electrolyte. Proton Exchange Membrane Fuel Cell.
UNIT III CORROSION SCIENCE 10 hrs.
Introduction - Electrochemical cell representation. Electrochemical series: Significance. Galvanic series.
Corrosion: Definition of corrosion, Dry corrosion: Mechanism of Dry corrosion, Pilling-Bedworth rule, Wet Corrosion:
Mechanism. Types of corrosion: Galvanic corrosion, Differential aeration corrosion, Pitting corrosion, Microbial Corrosion.
Factors influencing corrosion: Nature of the metal, nature of the environment. Corrosion control: Material selection and
Design, Cathodic protection. Corrosion inhibitors: Anodic, cathodic and Vapour phase inhibitors.
UNIT IV EXPLOSIVES AND ROCKET PROPELLANTS 10 hrs.
Introduction - Explosives: Requirements, Classification of Explosives: Low explosives, primary explosives and
high explosives. Assessment of explosives.
Rocket engines: Types of rocket engines. Basic principle, Mass fraction, Specific impulse, Thrust, Effective exhaust
velocity, Specific propellant consumption. Chemical propellants: Requirements, Classification: Liquid fuels, Liquid
oxidizers, Solid fuels, Solid oxidizers.
UNIT V SURFACE CHEMISTRY 10 hrs.
Introduction. Adsorption: Types, Adsorption of gases on solids, Adsorption of solutes from solution. Adsorption
isotherms: Freundlich adsorption isotherm, Langmuir adsorption isotherm. Industrial adsorbent materials: Role of
adsorbents in catalysis and water softening. Emulsion: Types: water/oil, oil/water. Applications of adsorption: Cottrells
precipitator, Coating of rubber on metals, Electrostatic painting.
1. Jain P.C. and Monica Jain,Engineering Chemistry, 15th Edition Dhanpat Rai Publishing Co. 2009
2. Dara S.S., Text Book of Engineering Chemistry, S.Chand & Co, 2008
3. Sheik Mideen A., Engineering Chemistry (I & II),13 th Edition, Shruthi Publishers, 2010
4. Parameswara Murthy C, Agarwal C V, Andra Naidu, Textbook of Engineering Chemistry, B S Publications, 2006
5. Kuriakose J.C. and Rajaram J., Chemistry in Engineering and Technology",. Vol.1 & 2, 5 th reprint, Tata McGraw Hill Publishing
Company (P) Ltd., 2010.
6. Sharma B.K., Engineering Chemistry, 2nd Edition, Krishna Prakasam Media (P) Ltd., 2001
7. Puri Br, Sharma Lr, Madhan S Pathania, Principles of Physical Chemistry, 41st Edition, Vishal Publishing Co., 2004
8. Mars G Fontana, Corrosion Engineering, 3rd Edition, Tata McGraw Hill, 2008
9. David Linden, Thomas B Reddy, Handbook of Batteries, 4th Edition, McGraw-Hill, 2010
10. George Paul Sutton, Oscar Biblarz, Rocket Propulsion Elements, 8 th Edition, John Wiley & Sons, 2010
UNIVERSITY EXAM QUESTION PAPER PATTERN:

Max. Marks: 80 Exam Duration: 3 hrs
One problem for 5 marks may be asked in Unit 1 - Water Technology

PROGRAMMING IN C L T P Credits Total Marks

SCSX1002
(Common to all Branches of B.E / B.Tech.) 3 0 0 3 100
UNIT I 10 hrs.
Introduction: Algorithms & flowcharts-Overview of C-Features of C-IDE of C Structure of C program-Compilation
& execution of C program-Identifiers, variables, expression, keywords, data types, constants, scope and life of variables,
local and global variables. Operators: arithmetic, logical, relational, conditional and bitwise operators- Special operators:
size of () & comma (,) operator-Precedence and associativity of operators & Type conversion in expressions.
Basic input/output and library functions: Single character input/output i.e. getch(), getchar(), getche() &
putchar()-Formatted input/output: printf() and scanf()-Library Functions: concepts, mathematical and character functions.
UNIT II 10 hrs.
Control structures: Conditional control-Loop control and Unconditional control structures.
Functions: The Need of a function-User defined and library function- Prototype of a function-Calling of a
function-Function argument-Passing arguments to function- Return values-Nesting of function- main()-Command line
arguments and recursion. Storage class specifier auto, extern, static, & register.
UNIT III 10 hrs.
Arrays: Single and multidimensional arrays-Array declaration and initialization of arrays-Array as function
arguments.
Strings: Declaration-Initialization and string handling functions.
Structure and Union: Defining structure-Declaration of structure variable-Accessing structure members-Nested
structures-Array of structures-Structure assignment-Structure as function argument-Function that returns structure- Union.
UNIT IV 10 hrs.
Pointers: The & and * operators-Pointers expressions-Pointers vs arrays-Pointer to functions-Function returning
pointers-Static and dynamic memory allocation in C.
DMA functions: malloc(), calloc(), sizeof(), free() and realloc()-Preprocessor directives.
UNIT V 10 hrs.
File management: Defining, opening & closing a file, text file and binary file- Functions for file handling: fopen,
fclose, gets, puts,fprint, fscanf, getw, putw, fputs, fgets, fread, fwrite-Random access to files: fseek, ftell, rewind-File
name as Command Line Argument.
Graphics in PC-Initialize Graphics Mode-Functions used In Graphics - Drawing a Point on the Screen-Drawing
lines, rectangles, ovals, circles, arcs, polygon, filling colors-Using Text in Graphics Display.
REFERENCE BOOKS:
1. Balaguruswami.E, Programming in C, TMH Publications,1997
2. Behrouz A. Forouzan & Richard F. Gilberg, Computer Science A Structured Programming using C, Cengage Learning, 3rd Edition, 2007
3. Gottfried , Programming with C, schaums outline series, TMH publications,1997
4. Mahapatra , Thinking in C, PHI publications, 2nd Edition.
5. Stevens , Graphics programming in C, BPB publication,2006
6. Subbura.R , Programming in C, Vikas publishing, 1st Edition, 2000


ENGINEERING GRAPHICS L T P Credits Total Marks

SMEX1001
(Common to all Branches of B.E / B.Tech) 1 2 0 3 100
UNIT I CONSTRUCTION OF PLANE CURVES 10 hrs.

Introduction - Importance of graphics in engineering applications Use of drafting instruments BIS specifications
and conventions Size, layout and folding of drawing sheets Lettering and dimensioning- Polygons used in
engineering practice methods of construction of pentagon and hexagon Construction of ellipse, parabola and
hyperbola.
UNIT II PROJECTION OF POINTS AND LINES 10 hrs.
General principles of orthographic projection first angle projection layout of views projections of points,
straight lines located in the first quadrant Determination of true lengths of lines and their inclinations to the planes
of projection Traces
UNIT III PROJECTION OF SOLIDS AND SECTION OF SOLIDS 10 hrs.
Projection of solids like prism, pyramid, cylinder and cone when the axis is inclined to only one plane of projection
Change of position method only - Sectioning of above mentioned solids in simple vertical positions by cutting plane
inclined to one reference plane and perpendicular to the other True shapes of sections
UNIT IV DEVELOPMENT OF SURFACES AND FREE HAND SKETCHING 10 hrs.
Need for development of surfaces Development of lateral surfaces of simple and truncated solids Prisms,
pyramids, cylinders and cones.- Pictorial representation of engineering objects Representation of three dimensional
objects in two dimensional media Need for multiple views Developing visualization skills through free hand sketching
of three dimensional objects.
UNIT V ISOMETRIC PROJECTIONS & PERSPECTIVE PROJECTIONS 10 hrs.
Principles of isometric projection Isometric scale Isometric projections of simple solids and combination of
solids - Prisms, pyramids, cylinders, cones and spheres (excluding isometric projections of truncated solids) - Perspective
projections - Simple objects like cube, prisms, pyramids by Vanishing point method & Visual Ray method (excluding
perspective projections of truncated solids)
TEXT BOOKS / REFERENCE BOOKS:
1. Natarajan, K.V, A Textbook of Engineering Graphics, Dhanalakshmi Publishers, Chennai, 2006 .
2. Venugopal, K. and Prabhu Raja, V., Engineering Graphics, New Age International(P) Ltd.,2008.
3. Ramachandran. S, Pandian. K, Ramanamurthy. E.V.V. and Devaraj. R Engineering Graphics, AirWalk Publications, Chennai, 2009
4. IS 10711-2001: Technical Products Documentation Size and Layout of Drawing Sheets
5. IS 9609 (Parts 0 & 1 )-2001: Technical Products Documentation Lettering
6. IS 10714(Part 20)-2001 & SP 46 -2003: Lines for Technical Drawings
7. IS 11669-1986 & SP 46-2003: Dimensioning of Technical Drawings
8. IS 15021(Parts 1 to 4)-2001: Technical Drawings-Projection Methods

Max. Marks : 80 Exam Duration : 3 hrs.
PART A : equal distribution of questions from each unit.
PART B - Split up:
Unit 1: 1 question from construction of hexagon / pentagon / ellipse &
1 question from construction of parabola / hyperbola
Unit 2: 1 question from projection of points & 1 question from projection of lines inclined to both the planes.
Unit 3: 1 question from projection of solids & 1 question from section of solids.
Unit 4: 1 question from development of surfaces & 1 question from orthographic projection.
Unit 5: 1 question from isometric projection & 1 question from perspective projection.

ENGINEERING MECHANICS L T P Credits Total Marks

SMEX1002
(Common to Mech, Mech & Prod, Aero, Auto and Civil) 2 1 0 3 100
UNIT I BASICS & STATICS OF PARTICLES 10 hrs.

Introduction - Units and Dimensions - Laws of Mechanics - Vectors - Vectorial representation of forces and
moments - Vector operations, Coplanar forces resolution and composition of forces - equilibrium of a particle - forces
in space - equilibrium of a particle in space - equivalent systems of forces - principle of transmissibility - Single
equivalent force.
UNIT II EQUILIBRIUM OF RIGID BODIES 10 hrs.

Free body diagram - Types of supports and their reactions - requirements of stable equilibrium - Moments and
Couples - Varignons theorem - Equilibrium of Rigid bodies in two dimensions - Equilibrium of Rigid bodies in three
dimensions
UNIT III PROPERTIES OF SURFACES AND SOLIDS 10 hrs.

Determination of Areas - First moment of Area and the centroid - simple problems involving composite figures.
Second moment of plane area - Parallel axis theorems and perpendicular axis theorems - Polar moment of
Inertia - Principal moments of Inertia of plane areas - Principle axes of inertia - relation to area moments of Inertia.
Second moment of plane area of sections like C,I,T,Z etc. - Basic Concept of Mass moment of Inertia
UNIT IV FRICTION 10 hrs.

Frictional Force - Laws of Coulomb friction - Cone of friction- Angle of repose- Simple contact friction - Screw
- Wedge - Ladder - Rolling resistance - Belt friction.
UNIT V DYNAMICS OF PARTICLES 10 hrs.

Displacement, Velocity and acceleration their relationship - Relative motion - Curvilinear motion - Newtons Law
-DAlemberts Principle, Work Energy Equation - Impulse and Momentum - Impact of elastic bodies.
Translation and rotation of rigid bodies- General plane motion.
TEXT BOOKS / REFERENCE BOOKS:

1. Beer & Johnston,"Vector Mechanics for engineers - Vol I &II", 8th Edition,2005
2. Irving H Shames, "Engineering Mechanics - Statics and Dynamics" 3rd edition, Prentice Hall of India pvt ltd 1993.
3. Timoshanko and Young, "Engineering Mechanics",4th Edition, Tata McGrawhill 2005.
4. McLean, "Engineering Mechanics" 3rd Edition, Schaum Series 1995
5. Ramachandran S., Engineering Mechanics 4th Edition, Air Walk Publications, 2006

80% Problems and 20% Theory Questions may be asked

L T P Credits Total Marks

SPRX4002 CAD LAB-I
0 0 4 2 100
1. Introduction
Basics, Fundamentals of feature based modeling.
2. Two Dimensional objects:

Create basic drawing objects - Points, Lines, Circles / Arcs, Planes and their combination,
Setup a drawing with correct scales, Draw with precision using Coordinate input & object
Snaps. Isometric drawing, Orthographic projection, Auxiliary views,
Modify with edit commands, Dimension and add text to drawing, Plot drawings
3. Three Dimensional objects:

Creating and Editing 3D objects, Viewing in 3D
4. Drawing creation from 3D models: Creation of various views and dimensioning,

Dimensioning commands, Editing Dimensions and Dimension text, Creating and Saving
Dimension styles, Updating Dimensions, specification of tolerances and surface finish, annotations, symbols like
welding, fillet, threads.

SCSX4002 PROGRAMMING IN C LAB
0 0 4 2 100
1. To write a simple menu driven calculator program using switch statement.
2. To write a program to calculate the nCr using functions.
3. To write a program to find the largest and smallest number using arrays.
4. To write a program to generate Fibonacci series.
5. To write a program to find the factorial of a number using recursion.
6. To write a program to print the sum of elements of an array using pointers.
7. To write a program to implement file handling
8. To write a program to perform matrix addition and multiplication.
9. To write a program to check for perfect number.
10. To write a program to implement string manipulation functions without using library functions.
11. To write a program to perform ASCII equivalent keystrokes.
12. To write a program to solve a polynomial equation.


SHSX1001 ENGLISH FOR SCIENCE AND TECHNOLOGY
3 0 0 3 100
UNIT I 10 hrs.
Reading comprehension- Skimming and Scanning - Transcoding -Bar diagram, Tables and Pie chart Discussing
topics of general interest or on current topics and making a presentation in the class - Conjunctions and discourse
markers- cloze reading- affixes definitions- tense- voice jumbled sentences.
UNIT II 10 hrs.
Subject verb agreement - Idioms and phrases, reading passages to answer evaluative, inferential and hypothetical
type of questions- Listening - Creative thinking and speaking- Formal letters - application for job- resume preparation-
inviting dignitaries to department workshops, symposium and university functions - Letter to the editor.
UNIT III 10 hrs.

Reading and summarising reports - Writing a project proposal - Editing - Checking punctuation and grammatical
errors- Types of Sentences preparation of Check List- formulating questions and answers - communicating politely.
UNIT IV 10 hrs.
Reported speech- Parts of speech- confusable words - Report on industrial visit - project report - Making effective
Power Point presentations - speaking about the future plans-expressing opinions-reading and guessing meanings of
unknown words from the context using appropriate verb forms
UNIT V 10 hrs.
Modal auxiliaries Presentation of problems and solutions wh- questions- question tags- punctuation- hyponymy-
listening and taking notes study skills preparing notes

1. Aeda Abidi & Ritu Chowdary, English For Engineers Made Easy, Cengage India Learning Limited, New Delhi. 2010
2. Geetha Nagaraj, A Course In Grammar and Composition, Foundation Books Pvt. Ltd., New Delhi, 2006.
3. Hewings. M, Advanced English Grammar, Cambridge University Press, Chennai. 2000.
4. Nagini, P S et al, Excellence Through communication, Shri Jai Publications, Chennai, 2005.
5. Raman M & Sangeetha Sharma, Technical Communication, Oxford University Press, USA 2005.
6. Reddy Devika and Chowdhary S, Technical English, Mac Millan, Chennai. 2009
7. Rizvi, M.A., Effective Technical Communication, Tata McGRaw Hill Publishing Company Limited, New Delhi, 2006.
8. Verma. Shivendra K, Interactive Grammar of Modern English, Frank Brothers & Company, India, 2000.

Part A: 2 Questions from each unit, each carrying 2 marks 20 marks
Part B: 6 questions from the five units with internal choice, each carrying 10 marks 60 marks

ENGINEERING MATHEMATICS II L T P Credits Total Marks

SMTX1002
(Common to all branches Except BIO Groups) 3 1 0 4 100
UNIT I THEORY OF EQUATIONS 10 hrs.

Relation between roots and Co-efficient of equations Symmetry function of roots Formation of equations
To increase or decrease the roots of a given equation by a given quantity Reciprocal equations Descartes rule
of signs Cardons method of solving cubic equations.
UNIT II THREE DIMENSIONAL ANALYTICAL GEOMETRY 10 hrs.

Direction cosines and ratios The equation of a plane Equation to a straight line Shortest distance between
two skew lines Coplanar lines Sphere Tangent line Plane section of a sphere Orthogonal spheres.
UNIT III INTEGRAL CALCULUS 10 hrs.

Double integrals Change of order of integration Change of Variables from Cartesian to Polar coordinates
Area - using double integral - Triple integrals - Volume using Triple integrals.
UNIT IV BETA AND GAMMA FUNCTIONS 10 hrs.
n
Properties
n
of definite
m
Integrals
n
Related definite Integrals Reduction formulae for e , x sinax, xn cos ax,
ax n
sin x, cos x and sin x cos x. Definitions of Beta and Gamma integrals Relation between them Properties
Evaluation of definite integrals in terms of Beta and Gamma function Simple applications.
UNIT V VECTOR CALCULUS 10 hrs.

Differentiation of a vector function Gradient, divergence and curl Directional derivative Identities (without
proof) - Irrotational and Solenoidal fields, Vector Integration Line, Surface and Volume Integrals, Integral theorems
(without proof), Greens theorem (in the plane), Gauss divergence theorem and Stokes theorem Simple applications
involving rectangles and cuboids.

1. Veerarajan.T, Engineering Mathematics for First Year, 2nd Edition , Tata McGrawHill Publications ,2008
2. Kandaswamy. P & co., Engineering Mathematics for First Year, 9th revised Edition, S.Chand & Co Pub., 2010
3. Arumugam.S & co, Engineering Mathematics Vol-II, Revised Edition, SciTech Pub., 2010
4. Grewal. B.S, Higher Engineering Mathematics, 40th Edition, Khanna Publications, 2007
5. Chandrika Prasad, Text book on Algebra and theory of equations, Pothishala Private Ltd., Allahabad, 2009


APPLIED PHYSICS L T P Credits Total Marks

SPHX1002
(Common For All Branches) 3 0 0 3 100
UNIT I FIBER OPTICS 10 hrs.

Introduction - Principle and structure of optical fibers-Acceptance angle-Numerical aperture-Types of optical
fibers-Preparation of fiber Double crucible technique-Types of rays-Theory of propagation of light-Energy loss in
optical fiber- Attenuation and distortion-Fiber splicing Fusion and mechanical splicing-Fiber connectors -Butt joint and
expanded beam connectors-Optical fiber communication system (block diagram) - Advantages and its applications.
UNIT II ACOUSTICS OF BUILDINGS 10 hrs.
Introduction Musical sound & noise-Characteristics of musical sound : pitch, loudness, quality Weber-Fechner
law-Relation between pitch & frequency-Factors on which intensity & loudness depend-Decibel scale-Sound intensity
level and sound pressure level-Sound absorption-OWU-Sound absorption coefficient and its measurements
Reverberation - Reverberation time Standard Reverberation time Sabines formula to determine the Reverberation
time (Jaegar method)- Factors affecting the acoustics of a building and the remedies-Principles to be followed in the
acoustical design of a good auditorium.
UNIT III FUNDAMENTALS OF DIGITAL ELECTRONICS 10 hrs.
Number systems - Binary, decimal, Hexadecimal and Octadecimal-Conversion from one number system to
another-Binary addition-Subtraction - Subtraction by 1s & 2s complement- BCD-ASCII-Excess 3 code and gray code.
UNIT IV NANO DEVICES 10 hrs.
Definition-Fabrication-Top down approach and bottom up approach-Nanomagnets Particulate Nanomagnets,
Geometrical Nanomagnets-Magneto Resistance Ordinary Magneto Resistance, Giant Magneto Resistance, Tunneling
Magneto Resistance- Probing Nanomagnetic Materials-Nanomagnetism in Technology-Nano Devices Injection Laser
Quantum Cascade Laser Optical Memories and Coulomb Blockade Devices
UNIT V MEDICAL PHYSICS 10 hrs.
Ultrasonics Introduction- Production of ultrasonic waves - Piezo-electric method-properties-Doppler effect - Blood
flow meter Determination of upward and downward transit time- A- scan, B-scan and M-scan-X-rays
Introduction-Units of X-rays- Diagnostic technologies of X-rays Radiography-Fluoroscopy-Image intensifier-Nuclear
medicine Introduction-units of radioactivity, 99
m Tc generator, nuclear medicine imaging devices - Gamma camera.
REFERENCE BOOKS :
1. Mathur.D.S, Heat and Thermodynamics, 5th Edition, Sultan Chand & Sons, 2004.
2. Gerd Keiser, Optical fiber communication, 3 rd Edition, Tata Mc Graw Hill, 2000.
3. John M. Senior, Optical fiber communications - Principle and Practice, 2nd Edition, Pearson Education, 2006.
4. Franz J.H, Jain V.K, Optical communication Components and Systems,1st Edition, Narosa Publications, 2001.
5. Malvino,Leach & Gautam Saha, Digital Principles and applications, 6th Edition, McGraw Hill, 2006.
6. William H. Gothman, Digital electronics An int. to theory and practice,2nd Edition, PHL of India, 2007.
7. Roy, Medical Bio Physics, 1st Edition, Saras Publications, 2001.
8. Vasantha Pattabhi, Bio Physics, 1 st Edition, Narosa, 2004.
9. Gaur. R.K. and Gupta. S.L., Engineering Physics, 8 th edition, Dhanbat Rai Publications,2007.
10. Avadhanulu. M.N. and. Kshirsagar. P.G, Engineering Physics, 2 nd edition, S. Chand & Company, 2007.
11. Dr. Arumugam M., Engineering Physics, 2nd edition, Anuradha Publications, 2002.
12. William D.Callister, Jr, Materials Science and Engineering An introduction, 6th Edition, John-Wiley and Sons, 2004.

Applications mentioned in the syllabus refer to the basic applications and not to any specific case

CHEMISTRY OF INDUSTRIAL MATERIALS L T P Credits Total Marks

SCYX1003
(Common to Mech, Mech & Prod, Chem, Civil, Auto & Aero) 3 0 0 3 100
UNIT I FUELS 10 hrs.

Introduction - Classification. Calorific values: GCV, NCV. Determination of calorific value by Bomb Calorimeter.
Liquid Fuels: Petroleum, Refining of petroleum. Cracking: Fluidized bed catalytic cracking. Knocking in Internal
Combustion engines , Cetane number, Octane number, Antiknocking agents: MTBE, ETBE. Gaseous Fuels: Natural
gas, CNG. Flue gas analysis using Orsats apparatus. Calculation of minimum quantity of air for combustion of fuels
(simple problems)
UNIT II LUBRICANTS AND ADHESIVES 10 hrs.
Lubricants: Introduction. Lubrication mechanism: Hydrodynamic lubrication, Boundary lubrication, Extreme pressure
lubrication. Properties of lubricants: Viscosity index (VI), Flash and Fire point, Cloud and Pour point, Aniline point,
Oiliness, Sligh oxidation test. Classification of lubricants: Liquid lubricants, Compounding of oil. Semi solid lubricants:
Greases, Types of greases. Solid lubricants: Graphite and Molybdenum disulphide (MoS 2).
Adhesives: Classification: Natural and synthetic adhesives. Adhesive action. Development of bond strength.
Physical and chemical factors influencing adhesive action.
UNIT III PHASE RULE 10 hrs.
Introduction - Statement, Definition of terms involved with examples. Applications of phase rule to one component
system: Water system. Reduced Phase rule: Construction of simple eutectic phase diagram using Thermal analysis,
Lead silver system, Iron carbon system: Allotropes of Iron, Micro constituents of Fe-C phase diagram.
UNIT IV ALLOYS AND COMPOSITES 10 hrs.
Alloys: Definition, Purpose of making alloys, Effect of alloying elements, Ferrous alloys: Stainless Steel. Non
Ferrous alloys: Aluminium and Copper alloys.
Composites: Definition , Constituents: Matrix Phase and Dispersed phase. Types of Composites: Metal matrix
composites (MMC), Ceramic matrix composites (CMC), Polymer matrix composites (PMC), Fiber reinforced plastics
(FRP), Cermets.
UNIT V INTRODUCTION TO NANOMATERIALS 10 hrs.
Introduction - Nanomaterials: definition, Nanoparticles: Synthesis by Chemical reduction method. Nanoporous
materials: Synthesis by Sol-gel method. Nanowires: Synthesis by VLS mechanism. Carbon Nanotubes: Singlewalled
and multiwalled nanotubes, Mechanical and electrical properties, Applications. Synthesis of Carbon Nanotubes: Electric
arc discharge method, Physical Vapour Deposition (PVD), Chemical Vapour Deposition (CVD), Laser Ablation method.
1. Jain.P.C and Monica Jain,"Engineering Chemistry", 15th Edition, Dhanpat Rai Publishing Co. (2009)
2. Charles P.Poole Jr, and Frank J Owens, "Introduction to Nanotechnology", John Wiley and Sons (2006).
3. Sheik Mideen.A, "Engineering Chemistry (I & II)", 13th Edition, Shruthi Publishers, (2010)
4. Dara.S.S, "Text Book of Engineering Chemistry", Reprint, S.Chand & Co, (2009)
5. Kuriakose.J.C and Rajaram.J, "Chemistry in Engineering and Technology",. Vol.1 & 2, 5th Rreprint, Tata McGraw Hill Publishing
Company (P) Ltd., 2009
6. Puri Br, Sharma Lr, Madhan S Pathania, "Principles of Physical Chemistry", 41 st Edition, Vishal Publishing Co., (2004)
7. Uppal.M.M, "Engineering Chemistry", 6th Ed, Khanna Publ. (2006)
8. Aggrawal.O.P, "Engineering Chemistry", 3 rd Ed, Khanna Publ. (2003)

PROGRAMMING IN C++ L T P Credits Total Marks

SCSX1003
(Common to all Branches) 3 0 0 3 100
UNIT I INTRODUCTION TO C++ 10 hrs.

Object Oriented Programming Paradigms - Comparison of Programming Paradigms Object Oriented Languages
- Benefits of Object Oriented Programming - Comparison with C - Overview of C++ -Pointers-References and Structures
- Functions - Scope and Namespaces - Source Files and Programs.
UNIT II CLASSES AND OBJECTS 10 hrs.

Working with classes Classes and objects Class specification-Class objects-Accessing class members-Defining
class members-Inline functions-Accessing member functions within class-Data hiding-Class member accessibility-Empty
classes, constructors-Parameterized constructors-Constructor overloading-Copy constructors-new, delete operators-this
pointer-friend classes and friend functions-Function overloading-Operator overloading.
UNIT III DERIVED CLASSES 10 hrs.

Base class and derived class relationship-Derived class declaration-Forms of inheritance-Inheritance and member
accessibility- Constructors in derived class-Destructors in derived class-Multiple inheritance-Multi level inheritance-Hybrid
inheritance-Virtual base classes-Member function overriding-Virtual functions.
UNIT IV I/O AND LIBRARY ORGANIZATION 10 hrs.

I/O Stream - File I/O - Exception Handling - Templates - STL Library Organization and Containers Standard
Containers - Overview of Standard Algorithms-Iterators and Allocators.
UNIT V OBJECT ORIENTED DESIGN 10 hrs.

Development Process Management - Object Identification Components - Object Oriented Design
Fundamentals Case Studies.
TEXT BOOKS:
1. Balagurusamy, Object Oriented Programming with C++, Tata McGraw Hill,4th Edition,2010
2. Venu Gopal.K.R, Ravishankar.T, and Raj kumar, Mastering C++, Tata McGraw Hill,1999.
REFERENCE BOOKS:
1. Bjarne Stroustrup, The C++ programming language, Addision Wesley, 3rd Edition,1998.
2. John R Hubbard, Programming with C++, Shaums Outline Series, McGraw Hill, 2nd edition.
3. James Martin & James J.Odell,Object Oriented methods-A foundation,Prentice Hall,1997.
4. Grady Booch, Object Oriented Analysis and Design with application, Addission Wesley, II Edition ,1994.


BASIC ELECTRICAL AND ELECTRONICS ENGINEERING L T P Credits Total Marks

SEEX1002
(Common to Mech, Mech & Prod, Auto, Aero & Chem) 2 1 0 3 100
BASIC ELECTRICAL ENGINEERING

UNIT I D.C.CIRCUITS 11 hrs.
Electrical quantities, Ohms Law, Resistors - Series and parallel combinations, Kirchoffs laws, Node and Mesh
Analysis - Star delta Transformation
UNIT II MAGNETIC CIRCUITS 8 hrs.

Definition of MMF, Flux and reluctance - Leakage factor - Reluctances in series and parallel (series and parallel
magnetic circuits) - Electromagnetic induction - Flemings rule - Lenzs law - Faradays laws - statically and dynamically
induced EMF - Self and mutual inductance - Energy stored and energy density - Analogy of electric and magnetic
circuits
UNIT III A.C.CIRCUITS 11 hrs.

Sinusoidal functions - RMS(effective) and Average values- Phasor representation - J operator - sinusoidal
excitation applied to purely resistive , inductive and capacitive circuits - RL , RC and RLC series and parallel circuits
- power and power factor - Three phase circuits - Star / Mesh connections - with balanced loads - measurement of
power by two wattmeter method.
TEXT BOOKS:
1. Mittle.B.N, Aravind Mittle, "Basic Electrical Engineering" , Tata McGraw Hill", 2nd Edition. Sep 2005
2. Theraja.B.L, "Fundamentals of Electrical Engineering and Electronics", S.Chand & Co., 1st Multicolor Edition, 2006 (Reprint 2009)
REFERENCE BOOKS:
1. Smarajit Ghosh, "Fundamentals of Electrical and Electronics Engineering", PHI Learning Private Ltd, 2nd Edition, 2010.
2. Wadhwa.C.L, "Basic Electrical Engineering", New Age International, 4th Edition, 2007. (Reprint June 2010)
3. Abhijit Chakrabarti, Sudipta nath & Chandan Kumar Chanda, "Basic Electrical Engineering", Tata McGraw Hill, 1st Edition, 2009.
4. T. Thyagarajan, Fundamentals of Electrical Engineering, SciTech Publications, 5th Edition, Reprint Jan 2010
BASIC ELECTRONICS ENGINEERING
UNIT I SEMICONDUCTOR DEVICES AND LOGIC GATES 10 hrs.

Discrete devices - PN junction diodes - Zener diodes - Tunnel diodes- Thermistors - Bipolar junction transistors
- Field effect transistors (FET and MOSFET) - Uni junction transistors - Silicon controlled rectifiers and Triacs. Universal
Gates - Half Adder - Full Adder.
UNIT II RECTIFIERS, AMPLIFIERS AND OSCILLATORS 10 hrs.

Half and full wave rectifiers- Capacitive and inductive filters- ripple factor- PIV-rectification efficiency. CB, CE
and CC Configuration - RC coupled amplifier- positive and negative feedback - Barkhausen criterion for oscillations -
RC and LC oscillators.
TEXT BOOK/REFERENCE BOOKS:

1. Sedha.R.S, A Text book of Applied electronics, 2nd Edition, S.Chand & company, 2005.
2. Dr.Bhattacharya.S.K and Dr.Renu vig, Principles of electronics, 3rd Edition, S.K.Kararia & Sons, 2002.

(Distribution may be 70% Theory and 30% Numerical)

BASIC MECHANICAL AND CIVIL ENGINEERING L T P Credits Total Marks

SPRX1001 (Common to Mech, Mech & Prod, Auto, Chem, ECE,
3 0 0 3 100
EEE, E&I, E&C and ETCE)
BASIC MECHANICAL ENGINEERING

UNIT I ENERGY SOURCES AND ENERGY CONVERSION 8 hrs.
Alternate sources of energy - solar, wind, wave, tidal and geo-thermal.
Boilers: Classification and principles of modern high pressure steam generators -Layout and working principles
of hydraulic (hydel), steam, gas turbine, diesel and nuclear power plants.
UNIT II INTERNAL COMBUSTION ENGINES 8 hrs.
Working principle of petrol and diesel engines - Two stroke and four stroke engines - Ignition systems -single
jet carburetor-spark plug-cooling systems- lubrication systems - fuel pump and fuel injector.
UNIT III MANUFACTURING PROCESSES 9 hrs.
Foundry process and technology: Foundry tools, pattern, moulding process.
Metal forming processes: Principles of forging, rolling, drawing and extrusion.
Metal joining process: Principles of welding - fundamentals of arc welding, gas welding and gas cutting - brazing
and soldering.
Metal machining process: Lathe -Specifications - Main components and their functions-Lathe operations.
Machining Concept - Drilling, Milling, Turning, Grinding and surface Finishing.
BASIC CIVIL ENGINEERING
UNIT I BUILDING MATERIALS AND STRUCTURES 8 hrs.
Construction materials - Physical and Mechanical properties - stone, brick, cement, concrete, bitumen, insulation
materials & steel. Buildings - various components and their functions. Foundation - functions - classification and
suitability. Flooring - function - types - cement concrete, tile, marble and granite flooring. Masonry - Stone and Brick
masonry and construction details. Roof - Types - Flat & sloped RCC roof. Introduction to seismic resistant structures.
UNIT II GENERAL PROPERTIES OF MATERIALS AND BUILDING VALUATION 8 hrs.
Stress, strain & modulus of elasticity. Simple maintenance methodologies, Valuation - plinth area method -
depreciation rate method. Land development process - Set backs, Authorities involved. Basics of interior design and
landscaping. Introduction to Orientation of the building & Energy efficient buildings.
UNIT III TRANSPORTATION AND SURVEYING 9 hrs.
Importance of Transport - Roads - Classification of roads - Traffic signs & signals - Surveying - Classification
and principles - Applications of Theodolite and Total Station - Measurements of distances - angle - Computation of
areas - Trapezoidal and Simpsons rule.
TEXT / REFERENCE BOOKS
1. Ramamrutham S, "Basic Civil Engineering", Dhanpat Rai Publishing Co. (P) Ltd. 1999
2. Shanmugam G and Palanichamy M S,"Basic Civil and Mechanical Engineering", Tata Mc Graw Hill Publishing Co., New Delhi, 2009.
3. Ramesh Babu.V, Text book on Basic Civil & Mechanical Engineering ,VRP publication,2009.
4. Helen Shanthi., Ramachandran. S and Premkumar, Basic Civil and Mechanical Engineering, Air Walk Publications, Chennai, 2009.
5. Natarajan K.V., Basic Civil Engineering
6. Palanichamy M S,"Basic Civil and Mechanical Engineering", Tata Mc Graw Hill Publishing Co., New Delhi, 3rd Edition Reprint 2009.
7. Venugopal.K, Basic Mechanical engineering , Anuradha Publications, Kumbakonam
8. Palani Kumar. K,Basic Mechanical engineering , AirWalk Publications, Chennai-4
9. VenuGopal K. and Prabhu Raja V.,"Basic Civil and Mechanical Engineering", 3rd Edition, Anuradha Publications, 2010.
Max.Marks: 80 Exam Duration : 3 hrs.
Basic Mechanical
Part A: 5 questions of 2 marks each - no Choice 10 marks
Part B: 3 questions from each of the three units of internal choice, each carrying 10 marks 30 marks
Basic Civil
Part A: 5 questions of 2 marks each - no Choice 10 marks
Part B: 3 questions from each of the three units of internal choice, each carrying 10 marks. 30 marks


SPRX4001 MECHANICAL WORKSHOP LAB
0 0 4 2 100
CARPENTRY
Handling of carpentry tools, A practice in marking, sawing planning and chiseling to size. Making simple joints
such as half-lap, dove-tail and mortise and tenon joints. Use of modern materials such as plywood, chip board, novapan,
laminated sheet (demonstration only).
FITTING
Use of fitting tools-practice in marketing, fitting to size and drilling-making of simple mating and profiles such
as V, Square, Dove-tail, Half-round joints.
WELDING
i. Electric Arc Welding
a) Study on Edge preparation techniques for Arc welding
b) List of Welding Exercises 1. Lap Joint 2. Butt Joint 3. Fillet Joint 4. Tee Joint 5. V Joint 6. Corner Joint
ii. Study on gas welding and gas cutting
iii. Study on TIG & MIG welding
FOUNDRY
i. Sand testing - Grain fineness - Permeability test.
ii. Study on Pattern Allowances
iii. Preparation of green sand moulding 1. Flanges 2. Glands 3. Bush 4. Dumbbell
iv. Metal casting technique (Demonstration only)
SCSX4007 PROGRAMMING IN C++ LAB
0 0 4 2 100
1. Write a program to calculate final velocity using the formula: v=u + a*t, with initial velocity, acceleration and time as
input.
2. Write a program to find the area of square, rectangle, circle using function overloading concept.
3. Write a program to change the sign of an operands using unary operator overloading concept.
4. Write a program to add two complex numbers using binary operator overloading concept.
5. Write a program to find mean value of two integers using friend function concept.
6. Write a program to multiple and divide two different data type using inline function concept.
7. Implement parametrized constructor, default conctructor, copy constructor and destructor
8. Write a program to enter the sale value and print the agents commission using single inheritance.
9. Write a program to enter salary and output income tax and net salary using multiple inheritance concept.
10. Write a program to enter the unit reading and output the customers telephone bill using hierarchical inheritance.
11. Write a program to find the grade of the students based on academic marks and sports using multilevel inheritance.
12. Write a program having student as an abstract class and create many derived classes such as Engineering, Medical
etc from students class. Create their objects and process them.
13. Write a program to count the words and characters in given text using virtual function.
14. Write a program to calculate net pay of employee using virtual base class concept.
15. Write a program to calculate division of two number with a try block to detect and throw an exception if the condition"
"divide by-zero" occurs.
16. Write a program to merge two files into one single file
17. Write a program to swap two values using funtion templates
18. Write a program to sort the numbers using class templates

ENGINEERING MATHEMATICS III L T P Credits Total Marks

SMTX1009
(Common to All Branches Except Bioinformatics) 3 1 0 4 100
UNIT I LAPLACE TRANSFORM 10 hrs.

Transforms of simple functions properties of transforms Transforms of derivatives and Integrals Periodic
functions Inverse transforms Convolution theorems Initial and final value theorems
UNIT II APPLICATIONS OF LAPLACE TRANSFORM 10 hrs.

Application of Laplace Transforms for solving : linear ordinary differential equations simultaneous differential
equations integral equations.
UNIT III COMPLEX VARIABLES 10 hrs.

Analytic functions Cauchy Riemann equations in Cartesian and Polar form properties of analytic functions
construction of analytic functions conformal mapping standard types bilinear transformations.
UNIT IV COMPLEX INTEGRATION 10 hrs.

Cauchys integral theorem integral formula Taylors and Laurents series (without proof) Residues Cauchys
residue theorem Contour integration and the circle and semi circular contours.
UNIT V THEORY OF SAMPLING AND TEST OF HYPOTHESIS 10 hrs.

Test of Hypothesis Large sample test of significance single proportion - difference of proportions Single
mean - difference of means. Small sample students t test single mean difference of means Fishers test
difference of variance, Exact sample Chi square test goodness of fit independence of attributes.

1. Kandasamy, P., Thilagavathy, K., and Gunavathy, K., Engineering Mathematics, Volumes II & III (4th Revised Edition), S. Chand
& Co., New Delhi, 2001.
2. Venkataraman, M.K. Engineering Mathematics Volumes III - A & B, 13th Edition National Publishing Company, Chennai, 1998.
3. Veerarajan, T., Engineering Mathematics, Tata McGraw Hill Publishing Co., NewDelhi, 1999.
4. Grewal, B.S., Higher Engineering Mathematics (35th Edition), Khanna Publishers, Delhi, 2000.
5. Kreyszig, E., Advanced Engineering Mathematics (8th Edition), John Wiley and Sons (Asia) Pvt. Ltd., Singapore, 2001.



SMEX1003 KINEMATICS OF MACHINES
2 1 0 3 100
UNIT I BASICS OF MECHANISMS 10 hrs.

Definitions: Links- Rigid, flexible and fluid links. Kinematic pairs Degrees of freedom, Kutzbach criterion, Grublers
criterion (without derivation), Mechanism, structure, Mobility of Mechanism, Kinematic chains and inversions: Grashofs
law Inversions of Four bar chain; Single slider crank chain and Double slider crank chain.
UNIT II KINEMATICS OF LINKAGE MECHANISMS 10 hrs.

Displacement, velocity and acceleration analysis of simple mechanisms Graphical method, Kleins construction:
Analysis of velocity and acceleration of single slider crank mechanism. Coriolis component of acceleration
UNIT III KINEMATICS OF CAM MECHANISMS 10 hrs.

Types of cams, Types of followers, Terminology and definitions. Displacement diagrams- SHM, Uniform velocity,
uniform acceleration and retardation and Cycloidal motion.Graphical construction of Cam profiles- Disc cam with
knife-edge, roller , flat-faced followers and oscillating roller follower.
UNIT IV GEARS AND GEAR TRAINS 10 hrs.

Spur Gear terminology, law of toothed gearing- involute and cycloidal tooth profiles , Path of contact, Arc of
contact, Contact ratio, Interference and Methods of avoiding interference in involute gears, Back lash, Comparison of
involute and cycloidal teeth. Basics of helical,bevel, worm and rack and pinion gears(Basics only).Simple gear trains,
Compound gear trains for large speed reduction, Epicyclic gear trains tabular methods of finding velocity ratio.
UNIT V FRICTION 10 hrs.

Introduction Dry friction Plate clutches. Belt drives Flat & V belt drives Materials used for belts, Velocity
ratio, slip, creep. Ratio of driving tensions, angle of contact, centrifugal tension, Maximum tension of belt power of
transmission.
TEXT BOOK:
1. Rattan.S.S,Theory of Machines,,2nd Edition,Tata McGraw Hill Publishers,2005
REFERENCE BOOKS:
1. Ghosh A and Mallick.A.K,Theory of Mechanisms and Machines,3rd Edition,Affiliated East-West Pvt. Ltd., New Delhi,2000
2. Rao J.S and Dukkipati R.V, Mechanism and Machines Theory, Wiley-Eastern Ltd., New Delhi.
3. Khurmi.R.S & Gupta.J.K, Theory of Machines, 15th Revised Edition,Eurasia Publishing House Pvt Ltd,1997
4. SHIGLEY J.E, Theory of Machines and Mechanisms, 2nd Edition, McGraw Hill Inc., 1995

PART B : (80% Problem and 20% Theory) - 2 Questions from each unit with internal choice,
each carrying 12 marks 60 marks

ENGINEERING THERMODYNAMICS L T P Credits Total Marks

SMEX1004
(Common to MECH, AERO & AUTO) 2 1 0 3 100
(Use of standard thermodynamic tables, Mollier diagram, Psychometric chart and Refrigerant property tables are
permitted)
UNIT I BASIC CONCEPT AND FIRST LAW 10 hrs.
Basic concepts concept of continuum, macroscopic approach, thermodynamic systems closed, open and
isolated. Property, state, path and process, quasi-static process, work, modes of work, Zeroth law of thermodynamics
concept of temperature and heat. Concept of ideal and real gases. First law of thermodynamics application to
closed and open systems, internal energy, specific heat capacities, enthalpy, steady flow process with reference to
various thermal equipments.
UNIT II SECOND LAW AND ENTROPY 10 hrs.
Second law of thermodynamics Kelvins and Clausius statements of second law. Reversibility and irreversibility.
Carnot theorem, Carnot cycle, reversed carnot cycle, efficiency, COP. Thermodynamic temperature scale, Clausius
inequality, concept of entropy, entropy of ideal gas, principle of increase of entropy, availability.
UNIT III PROPERTIES OF PURE SUBSTANCE 10 hrs.
Properties of pure substances Thermodynamic properties of pure substances in solid, liquid and vapour phases,
phase rule, P-V, P-T, T-V, T-S, H-S diagrams, PVT surfaces, thermodynamic properties of steam. Calculations of work
done and heat transfer in non-flow and flow processes.
UNIT IV IDEAL AND REAL GASES AND THERMODYNAMIC RELATIONS 10 hrs.
Gas mixtures Properties of ideal and real gases Equations of state Avagadros law- Vanderwaals equation
of state compressibility factor compressibility chart Daltons law of partial pressure Exact differentials T-ds
relations Maxwells relations Clausius Clapeyron equations Joule Thomson coefficient.
UNIT V PSYCHROMETRY 10 hrs.
Psychrometry and psychrometric charts, property calculations of air vapour mixtures. Psychrometric process
Sensible heat exchange processes. Latent heat exchange processes. Adiabatic mixing, evaporative cooling, problems.
TEXT BOOKS:
1. Nag.P.K., Engineering Thermodynamics, 4th Edition, Tata McGraw-Hill, New Delhi,2008
2. Lynn D Russell, George A, Adebiyi Engineering Thermodynamics,6th Edition, Indian Edition, Oxford 3, University Press, New Delhi,
2008.
REFERENCE BOOKS:
1. Yunus A Cengel and Michael Boles, Thermodynamics An Engineering Approach, 6th Edition, McGraw Hill,2008
2. Ratha Krishnan.E, Fundamentals of Engineering Thermodynamics, 2nd Edition, Prentice Hall of India Pvt. Ltd, 2006
3. Arora C.P, Thermodynamics, 2nd Edition, Tata McGraw-Hill, New Delhi, 2003.
4. Merala C, Pother, Craig W, Somerton, Thermodynamics for Engineers, 2nd Edition,Schaum Outline Series, Tata McGraw-Hill, New
Delhi, 2009
5. Venwylen and Sontag, Classical Thermodynamics, Wiley Eastern, 1987
6. Holman.J.P., Thermodynamics, 3rd Ed. McGraw-Hill, 1995.



SMEX1005 FLUID MECHANICS AND MACHINERY
2 1 0 3 100
UNIT I FLUID PROPERTIES AND FLUID STATICS 10 hrs.

Fluid Properties: Density Specific Weight Specific Gravity viscosity surface tension capillarity compressibility.
Fluid Statics: Hydrostatic Law Pressure Variation in static fluid Hydrostatic force on a submerged plane surfaces
Location of hydrostatic force. Manometers Simple U tube and differential manometers Buoyancy
Meta-centric height determination of stability of floating bodies and submerged bodies.
UNIT II BASIC EQUATIONS OF MOTION AND FLOW MEASUREMENT 10 hrs.

Basic equations of motion: Types of fluid flow Continuity, momentum and energy equations Eulers and Bernoullis
Equation and its applications.
Flow Measurement: Orifice meter, Venturi meter, Piezometer, Pitot Tube.
UNIT III FLOW THROUGH ORIFICES 10 hrs.

Flow through orifices: Classification Hydraulic co-efficient Flow through rectangular orifice, Notches and
weirs.
Laminar and Turbulent flow: Reynolds experiment Major and minor losses in pipes Darcy weisbachs
equation, chezys formula pipes in series and pipes in parallel total energy line hydraulic gradient line Equivalent
pipe
UNIT IV CENTRIFUGAL PUMPS AND RECIPROCATING PUMPS 10 hrs.
Centrifugal Pumps: Definition Operations Velocity Triangles Performance curves Cavitations Multistaging.
Reciprocating Pumps: Operation Slip indicator Diagram Separation Air vessels.
UNIT V HYDRAULIC TURBINES AND DIMENSIONAL ANALYSIS 10 hrs.

Hydraulic Turbines: Classification of hydraulic turbines Working principle of Pelton wheel, Francis and Kaplan turbines
velocity triangles draft tube hydraulic turbine characteristics.
Dimensional Analysis: Buckinghams Theorem, Non-Dimension Numbers, Similarities of Flow. Model studies
TEXT BOOK:
1. Bansal.R.K,. Fluid Mechanics & Hydraulics Machines, 9th Edition,Laxmi Publications, 2005
REFERENCE BOOKS:
1. Douglas. J. F., Gasiorek. J. M., Swaffield. J. A., Fluid Mechanics ELBS, 4th Edition,Prentice Hall,2000
2. Modi P. N., Seth S. M., Hydraulics and Fluid Mechanics, Standard Book House, 1987
3. Kumar K. L., Engineering Fluid Mechanics, 8th Edition, Eurasia Publication.2009
4. Govinda Rao N. S., Fluid Flow Machines, 2nd Edition,Tata McGraw Hill, New Delhi, 1990.



SMEX1006 MACHINE DRAWING
1 2 0 3 100
UNIT I DRAWING STANDARDS 10 hrs.

BIS code of practice for Engineering Drawing Machine Drawing Conventions Need for drawing conventions
Conventional representation of common machine elements such as screws, bolts, nuts, keys, gears, bearings,
couplings, webs, ribs etc., - Abbreviations and symbols for use in technical drawings - Types of sections Parts not
usually sectioned.
UNIT II FITS, TOLERANCES AND PREFERRED NUMBERS 10 hrs.

Fits Types of fits Allocation of fits for various machine parts Tolerances Types Representation on
the drawing Tolerance data sheet Geometric tolerance Preferred numbers
UNIT III MANUFACTURING DRAWING (Only for practice; Not to be asked in the examination) 15 hrs.
Preparation of manufacturing drawing for the following machine components: Hexagonal headed bolts- Nuts
Square headed bolts Cotter joints Cotter joint with Sleeve Socket and Spigot Cotter joint Cotter joint with
Gib and Cotter Knuckle joint
UNIT IV ASSEMBLY DRAWING 15 hrs.

Preparation of assembled views from the given parts Screw jack Plummer block Snug and octagonal
type Swivel bearing Lathe tail stock Steam stop valve Machine vice - Petrol Engine Connecting rod Cross
head for horizontal and vertical steam engine.
TEXT BOOKS:
1. Gopala Krishnan.K.R,Machine Drawing , 16th Edition, Sabhas Publications, 2008
2. N. D. Bhatt.N.D, Machine Drawing, 44th Edition, Charotar Publishing House, 2009
3. PSG Design Data Book
REFERENCE BOOKS:
1. Gill.P.S,Machine Drawing. 5th Edition, S.K.Kataria & Sons,2009
2. Gupta.R.B,Machine Drawing , 1st Edition, Satya Prakash & Sons, 2006
Note: 1. Question Paper will consists of two parts (A & B) of 3 hours duration.
2. All the students will have to submit all the drawing sheets in a file periodically for continuous assessment.
Part A: Problems on Limits (finding upper limit and lower limit) : 10 Marks
Problems on Clearance Fit / Interference fit / Transition fit : 15 Marks
Conventions symbols and abbreviations : 5 Marks
Part B: Assembly Drawing (only full sectional front view / top view) : 50 Marks


SAUX 1001 AUTOMOTIVE PETROL ENGINES
3 0 0 3 100
UNIT I ENGINE CONSTRUCTION AND OPERATION 10 hrs.

Constructional details of four stroke petrol engine, working principle, air standard Otto cycle, actual indicator
diagram, two stroke engine construction and operation, comparison of four stroke and two stroke engine operation,
firing order and its significance. Port Timing, Valve Timing Diagram.
UNIT II SI ENGINE FUEL SYSTEM 10 hrs.

Carburettor working principle, requirements of an automotive carburettor, starting, idling, acceleration and normal
circuits of carburettors. Compensation, maximum power devices, constant choke and constant vacuum carburettors,
fuel feed systems; mechanical and electrical fuel feed pumps. Petrol injection, MPFI.GDI System, Determination of
air-fuel ratio and numerical problems on air-fuel ratio calculations.
UNIT III IGNITION SYSTEM 10 hrs.

Types and working of battery coil and magneto ignition systems, relative merits and demerits, centrifugal and
vacuum advance mechanisms. Types and construction of spark plugs, electronic ignition systems. Transistorized coil
ignition system, capacitive discharge ignition system
UNIT IV COOLING AND LUBRICATION SYSTEM 10 hrs.

Need for cooling system, Types of cooling system: air cooling system, liquid cooling system, forced circulation
system, pressure cooling system. Lubrication system; mist, wet sump lubrication system, properties of lubricants.
UNIT V COMBUSTION AND COMBUSTION CHAMBERS 10 hrs.

Combustion in SI engine; stages of combustion, flame propagation, rate of pressure rise, abnormal combustion,
detonation, effect of engine variables on knock, knock rating. Combustion chambers; different types, factors controlling
combustion chamber design. Engine Management Systems, Performance curves & Evaluation, Emission & Emission
Control, Nano Problems, Heat release analysis.
TEXT BOOKS:
1. Ganesan. V., Internal Combustion Engines, Tata McGraw-Hill Publishing Co., New Delhi, 2003.
2. Mathur D.S.and Sharma R.P., A course in Internal combustion engines, Dhanpat Rai & Sons Publications, New Delhi, 2001.
3. Ramalingam. K.K., Internal Combustion Engines, SciTech Publications, Chennai, 2000.
REFERENCES:
1. Heldt. P.M., High Speed Combustion Engines, Oxford IBH Publishing Co., Calcutta, 1975.
2. Obert. E.F., Internal Combustion Engines Analysis and Practice, International Text Books Co., Scranton, Pennsylvania 1988.
3. William H.Crouse, Automotive Engines, McGraw-Hill Publishers, 1985.
4. Ellinger. H.E., Automotive Engines, Prentice Hall Publishers, 1992.
5. John B.Heywood, Internal Combustion Engine Fundamental, McGraw-Hill, 1988.
6. Pulkrabek Engineering Fundamentals of the Internal Combustion Engines, Practice Hall of India, 2003.

Max Mark: 80. Exam Duration: 3hrs
PART B : (100% Theory) - 2 Questions from each unit with internal choice, each carrying 12 marks 60 marks


SAUX 1002 FUELS AND LUBRICANTS
3 0 0 3 100
UNIT I MANUFACTURE OF FUELS AND LUBRICANTS 10 hrs.

Structure of petroleum, refining process, fuels, thermal cracking, catalytic cracking, polymerization, alkylation,
isomerisation, blending, products of refining process. Manufacture of lubricating oil base stocks, manufacture of finished
automotive lubricants, Distillation Curve.
UNIT II THEORY OF LUBRICATION 10 hrs.

Engine friction: introduction, total engine friction, effect of engine variables on friction, hydrodynamic lubrication,
elastic hydrodynamic lubrication, boundary lubrication, bearing lubrication, functions of the lubrication system, introduction
to design of a lubricating system.
UNIT III LUBRICANTS 10 hrs.

Specific requirements for automotive lubricants, oxidation deterioration and degradation of lubricants, additives
and additive mechanism, synthetic lubricants, classification of lubricating oils, properties of lubricating oils, tests on
lubricants. Grease, classification, properties, test used in grease.
UNIT IV PROPERTIES AND TESTING OF FUELS 10 hrs.

Thermo-chemistry of fuels, properties and testing of fuels, relative density, calorific value, distillation, vapor
pressure, flash point, spontaneous ignition temperature, viscosity, pour point, flammability, ignitability, diesel index, API
gravity, aniline point etc. Octane and Cetane Numbers.
UNIT V COMBUSTION & FUEL RATING 10 hrs.

SI Engines flame propagation and mechanism of combustion, normal combustion, knocking, octane rating, fuel
requirements. CI Engines - mechanism of combustion, diesel knock, Cetane rating, fuel requirements. Additive
mechanism - requirements of an additive, petrol fuel additives and diesel fuel additives specifications of fuels.
Alternative Fuels
TEXT BOOKS:
1. Ganesan. V. Internal Combustion Engineering, Tata McGraw-Hill Publishing Co., New Delhi, 2003.
2. Mathur D.S., Sharma. R.P. A course in internal combustion engines, Dhanpatrai publication, 2003.
3. Obert. E.F. Internal Combustion Engineering and Air Pollution, International book Co., 1988.
REFERENCES:
1. Brame. J.S.S. and King. J.G Fuels Solids, Liquids, Gaseous.
2. Francis. W Fuels and Fuel Technology, Vol. I & II
3. Hobson. G.D. & Pohl. W - Modern Petroleum Technology
4. Lansdowne A.R. Lubrication A practical guide to lubricant selection Pergamum press 1982.
5. Raymond.C.Gunther Lubrication Chilton Book Co., - 1971.


SMEX 4006 FLUID MECHANICS AND MACHINERY LAB
0 0 4 2 100
FLUID MECHANICS
1. Determination of Friction Coefficient using Pipe Friction apparatus.
2. Determination of Co-efficient of discharge of Venturimeter.
3. Determination of Co-efficient of discharge of Orifice meter.
4. Determination of Co-efficient of discharge of Notches.
5. Determination of Meta centric Height of Ship model.
6. Determination of Co-efficient of discharge of Orifice and Mouth Piece.
7. Determination of Co-efficient of velocity of Pitot tube.
FLUID MACHINERY
1. Performance characteristics of Centrifugal Pump.
2. Performance characteristics of Reciprocating Pump.
3. Performance characteristics of Multistage Centrifugal Pump.
4. Performance characteristics of Gear Pump.
5. Performance characteristics of Jet Pump.
6. Performance characteristics of Deep well Turbine Pump.
7. Performance characteristics of Pelton Wheel Turbine.
8. Characteristics of Francis Turbine.
9. Performance characteristics of Kaplan Turbine.

FUELS AND LUBRICANTS AND ENGINE L T P Credits Total Marks

SAUX 4001
TESTING LAB 0 0 4 2 100
FUELS AND LUBRICANTS
1. Temperature dependence of viscosity of lubrication oil by Redwood Viscometer.
2. Viscosity Index of lubricating oil by Say bolt Viscometer.
3. Flash and Fire points of fuels.
4. Flash and Fire points of lubricants.
5. ASME distillation test of gasoline.
6. Drop point of grease and mechanical penetration in grease.
7. Aniline distillation test of gasoline.
8. Calorific value of liquid fuel.
9. Calorific value of gaseous fuel.
10. Reid vapor pressure test.
ENGINE TESTING LAB
1. Study of hydraulic, electrical and eddy current dynamometers.
2. Valve timing and port timing diagram.
3. Performance and emission test on two stroke SI engine.
4. Performance and emission test on automotive multi-cylinder SI engine.
5. Performance test and emission on automotive multi-cylinder CI engine.
6. Retardation test on I.C. Engines.
7. Heat balance test on automotive multi-cylinder SI engine.
8. Heat balance test on automotive multi-cylinder CI engine.
9. Morse test on multi-cylinder SI engine.
10. Study of P- and P-V diagrams for IC engine with piezo-electric pick up, charge amplifier, angle encoder.
11. Heat release analysis for SI and CI engines.

ENGINEERING MATHEMATICS IV L T P Credits Total Marks

SMTX 1010
(Common to All Branches Except Bio Informatics) 3 1 0 4 100
UNIT I PARTIAL DIFFERENTIAL EQUATION 10 hrs.

Formulation of equations by elimination of arbitrary constants and arbitrary functions-solutions by
equations-general, particular and complete integrals-Lagranges linear equation-standard type of first order
equation-second and higher order equations with constant coefficients-homogenous equations.
UNIT II FOURIER SERIES 10 hrs.

Eulers formula-Dirichlets conditions-convergence statement only-change of interval-odd and even functions-half
range series-RMS value-Parsevals formula-complex form of Fourier series-harmonic analysis.
UNIT III WAVE AND HEAT EQUATION 10 hrs.

One dimensional wave equation-Transverse vibration of finite elastic string with fixed ends-boundary and initial
value problems-Fourier series solution-Derivation of one dimensional heat equation-steady and unsteady state-boundary
and initial value problems-Fourier series solutions. Two dimensional heat equation-steady state heat flow in two
dimensions-Laplace equation in Cartesian coordinates - Fourier series solution.
UNIT IV FOURIER TRANSFORM 10 hrs.

The infinite Fourier transform-sine and cosine transform-Properties-Inversion theorem-Finite Fourier transform-sine
and cosine transform-Convolution theorem-Parsevals identity.
UNIT V Z TRANSFORM AND DIFFERENCE EQUATIONS 10 hrs.

Z Transforms Elementary Properties Inverse Z transforms Convolution theorem Formation of difference
equations Solution of difference equations using Z transforms.

1. Kandasamy, P., Thilagavathy, K., and Gunavathy, K., Engineering Mathematics, Volumes II & III (4th Revised Edition), S. Chand
& Co., New Delhi, 2001.
2. Venkataraman, M.K. Engineering Mathematics Volumes III - A & B, 13th Edition National Publishing Company, Chennai.
3. Veerarajan, T., Engineering Mathematics, Tata McGraw Hill Publishing Co., New Delhi, 1999.
4. Grewal, B.S., Higher Engineering Mathematics (35th Edition), Khanna Publishers, Delhi, 2000.
5. Kreyszig, E., Advanced Engineering Mathematics (8th Edition), John Wiley and Sons (Asia) Pvt Ltd., Singapore, 2001.


DYNAMICS OF MACHINERY L T P Credits Total Marks

SMEX1008
(Common to Mech & Auto) 3 1 0 4 100
UNIT I FORCE ANALYSIS AND FLYWHEELS 10 hrs.

Static force analysis of mechanisms D Alemberts principle - Inertia force and Inertia torque Dynamic force
analysis - Dynamic Analysis in Reciprocating Engines Gas Forces - Equivalent masses - Bearing loads - Crank
shaft Torque.
Turning moment diagrams Fluctuation of Energy and speed Energy stored in Flywheel Mass of Flywheel
Dimensions of Flywheel
UNIT II BALANCING 10 hrs.
Balancing Static and Dynamic Balancing of Rotating Masses - Balancing of several masses rotating in same
plane and in different planes
Partial Balancing of locomotives Variation of tractive force, Hammer blow and swaying couple Balancing of
primary and secondary forces in In-line engines.
UNIT III FREE VIBRATION 10 hrs.
Basic features of vibratory systems - Lumped mass parameter systems - Degrees of freedom - Free vibration
of Longitudinal, Transverse and Torsional systems of Single degree of freedom - Equations of motion - Natural frequency
Whirling of shafts and critical speed - Dunkerleys Method Torsional vibration of Two and Three rotor system.
Damped free vibration - Types of Damping Critical damping coefficient - Damping Factor Logarithmic
Decrement.
UNIT IV FORCED VIBRATION 10 hrs.
Forced vibration of single degree freedom system with damping - Response to periodic forcing- Harmonic Forcing-
Force transmissibility and amplitude transmissibility
Reciprocating and rotating unbalance - vibration isolation and transmissibility - Support motion - self excited
vibration with examples
UNIT V MECHANISMS FOR CONTROL 10 hrs.
Governors - Types - Centrifugal governors Porter, Proel and Hartnell Governors Characteristics Sensitivity
Stability Hunting Isochronisms equilibrium speed - Effect of friction - Controlling Force
Gyroscopes - Gyroscopic couple - Gyroscopic stabilization - Gyroscopic effects in Aeroplanes and ships.
TEXT BOOKS
1. Khurmi R.S & Gupta J.S, Theory of Machines, 16th Edition, S.Chand & Company, 2005.
2. Singh V.P, Mechanical Vibrations, 3rd Edition, Dhanpatrai & Co., 2006.
REFERENCE BOOKS
1. Ghosh A. and Malik A.M, Theory of Mechanism and Machines, 3rd Edition, Affiliated East West Press (P) Ltd. 2000.
2. Ashok G. Ambekar, Mechanism and Machine Theory, PHI Learning Private limited 2009.
3. Grover G.K, Mechanical Vibrations, 3rd Edition, Nemchand & Brothers 1996.
4. Rao J.S Dukkipatti, Mechanisms and Machines Theory, 2nd Edition - Wiley Eastern Ltd. 1992.
5. Hamilton H. Mabic and Charles F. Reinnoltz, Mechanisms and Dynamics of Machinery, 4th Edition, John Wiley & Sons, 1987.
6. Shigley, J.E., Theory of Machines and Mechanisms, 2nd Edition, McGraw Hill Inc., 1995.
7. Thomson W.T., Theory of Vibration with Applications, 5th Edition, Prentice Hall of India (P) Ltd., 1997.



SMEX1009 THERMAL ENGINEERING
3 1 0 4 100
(Use of standard thermodynamic tables, Mollier diagram, Psychometric chart and Refrigerant property tables are
permitted in the examination)
UNIT I GAS POWER CYCLES 10 hrs.

Otto, Diesel, Dual, Brayton cycles, Calculation of mean effective pressure and air standard efficiency, Actual
and theoretical PV diagram of Four stroke engines, Actual and theoretical PV diagram of two stroke engines. Numerical
Problems.
UNIT II INTERNAL COMBUSTION ENGINES 10 hrs.

Classification of IC engine, IC engine components and functions. Valve timing diagram and port timing diagram.
Comparison of two stroke and four stroke engines. Fuel supply systems, Ignition Systems, Performance calculation.
Comparison of petrol & diesel engine. Fuels, Air-fuel ratio calculation, Knocking and Detonation. Lubrication system
and cooling system. Exhaust gas analysis, pollution control norms. Numerical Problems.
UNIT III STEAM NOZZLES AND TURBINES 10 hrs.

Flow of steam through nozzles, shapes of nozzles, effect of friction, critical pressure ratio, supersaturated flow.
Impulse and reaction principles, compounding, velocity diagrams for simple and multistage turbines, speed
regulations-governors and nozzle governors. Numerical Problems.
UNIT IV AIR COMPRESSOR 10 hrs.

Classification and working principle, work of compression with and without clearance. Volumetric efficiency,
Isothermal efficiency and isentropic efficiency of reciprocating air compressors. Multistage air compressor and inter
cooling work of multistage air compressor, various types of compressors (Descriptive treatment only). Numerical
Problems.
UNIT V REFRIGERATION AND AIR-CONDITIONING 10 hrs.

Vapour compression Refrigeration cycle super heat, sub cooling, performance calculations. Working principle
of vapour absorption system. Ammonia water, Lithium bromide water systems (Description only), Comparison
between vapour compression and absorption systems. Psychrometry, Psychometric chart, Cooling load calculations.
Concept of RSHF, GSHF, ESHF, Air conditioning systems. Numerical Problems.
TEXT BOOKS:
1. Rajput, Thermal Engineering, 6th Edition, Laxmi Publications, 2006.
2. Rudramoorthy R, Thermal Engineering, 2nd Edition, Tata McGraw-Hill, New Delhi, 2003.
REFERENCE BOOKS:
1. Kothandaraman.C.P., Domkundwar.S. and Domkundwar.A.V, A course in Thermal Engineering, Dhanpat Rai & Sons, Fifth edition,
2002
2. Holman. J.P., Thermodynamics,4th Edition, McGraw-Hill, 1998.
3. Rogers, Meyhew, Engineering Thermodynamics, 2nd Edition, ELBS, 1992.
4. Arora.C.P., Refrigeration and Air conditioning, TMH, 1994.
5. Sarkar B.K, Thermal Engineering, 3rd Edition,Tata McGraw-Hill, 2006.


SMEX1010 STRENGTH OF MATERIALS
2 1 0 3 100
UNIT I INTRODUCTION 10 hrs.

Stress and strain Application to uniform and varying, Composite sections Elastic constants, Stress Strain
diagram for brittle and ductile materials, Definition of creep, fatigue, Thermal stresses
UNIT II BENDING MOMENT AND SHEAR FORCE 10 hrs.

Types of Beams, Supports and Loads Concept and significance of shear force and bending moment Shear
force and Bending moment diagram for cantilever, simply supported and overhanging beams.
UNIT III BENDING AND SHEAR STRESS DISTRIBUTION, TORSION 10 hrs.

Stresses in Beams Simple bending theory Composite Beams Combined bending and Direct stress
Shear stress distribution for Rectangular and I section Simple Torsion theory Stresses and deformations in Solid
and Hollow circular shafts
UNIT IV SLOPE AND DEFLECTION OF BEAMS 10 hrs.

Double integration method Macaulays method Moment area method Conjugate method for simply supported
and cantilever beams, (only point loads & Uniformly distributed loads.)
UNIT V THIN CYLINDERS AND SPHERES, THICK CYLINDERS 10 hrs.

Stresses and deformation in thin cylinders and spherical shells subjected to internal pressure, Thick cylinders
Hoop and radial stress variation, Lames equation, Compound cylinders Shrink fit
TEXT BOOKS:
1. Ramamrutham.R., Strength of Materials ,16th Edition, Dhanpat Rai Publishing company, 2007.
2. Bansal.R.K., Strength of Materials, 4th Edition, Laxmi Publications, 2007.
3. Vazirani. V.N. & Ratwani, N.M., Strength of Materials, 2nd Edition, Vol-I, Khanna Publishers, 1996.
REFERENCE BOOKS:
1. Punmia.B.C, Strength of Materials, 2nd Edition, Laxmi Publications, 1992.
2. Rajput.R.K. Strength of Materials4th Edition, S.Chand & co, New Delhi, 2002.
3. Khurmi, R.S, Strength of Materials, 23rd Edition,S.Chand & Co, 2008
4. Timoshenko.S.P. and Gere.J.M, Mechanics of Materials, 5th Edition,Tata McGraw Hill, 2003.
5. Egor P. Popov, Introduction of Mechanics of Solids, 2 nd Edition, Prentice Hall of India, New Delhi, 1996.
6. Harvey ,Design of Pressure vessels1st Edition, 1991

PART B : (100% Problem) - 2 Questions from each unit with internal choice, each carrying 12 marks 60 marks

MICROPROCESSOR AND MICROCONTROLLER L T P Credits Total Marks

SECX1011
(Common to Mech & Auto) 3 0 0 3 100
UNIT I MICROPROCESSORS 8085 10 hrs.

Microcomputer System 8085 Architecture 8085 Pin Diagram Buses and Memory Operations - Addressing
Modes, Basic concepts of microprocessor programming Mnemonics Hex code fundamentals of assembly language
- Instruction set for 8085.
UNIT II MICROPROCESSOR PROGRAMS AND INTERFACING - 8085 10 hrs.

Program format - Simple programs Addition, Subtraction, Multiplication, Division, Block movement of Data,
Finding Smallest number array, and Sorting. Interfacing Chips: Parallel I/O (8255) Keyboard and Display controller
(8279) Timer/ Counter (8253) - Programmable Interrupt Controller (8259).
UNIT III MICROPROCESSOR APPLICATIONS - 8085 10 hrs.

8085 Microprocessor interfacing with simple control devices Traffic light control Stepper Motor control
Temperature and Humidity in Refrigeration & Air-Conditioning Anti lock breaking - General Block diagram for Interfacing
CNC machines.
UNIT IV 8051 MICROCONTROLLER 10 hrs.

8051 Architecture: Microcontroller Hardware I/O Pins, Ports Internal and External memory Counters and
Timers Serial data I/O Interrupts 8051 Assembly Language Programming: Addressing modes, Instruction set of
8051, Data transfer instructions, Arithmetic and Logical Instructions, Jump and Call Instructions interrupts and return
interrupts and return interrupt handling.
UNIT V 8051 PROGRAMMING AND APPLICATIONS 10 hrs.

Program format - Simple programs Addition, Subtraction, Multiplication, Division, Finding Smallest number array,
and Sorting.
8051 Interfacing with: LCD, Sensors, Stepper Motors, Keyboard, Pulse measurement, ADC and DAC.
TEXT BOOKS:
1. Ramesh S Gaonkar, Microprocessor Architecture, Programming and application with 8085, 4thEdition, Penram International Publishing,
New Delhi, 2000.
2. Douglas V., Hall, Microprocessors and Interfacing, TMH.
3. Kenneth J Ayala, The 8051 Microcontroller Architecture Programming and Application, 2ndEdition, Penram International Publishers
(India), New Delhi, 1996.
REFERENCE BOOKS:
1. Mohammed Ali Mazidi and Janice Gillispie Mazidi, The 8051 Microcontroller and Embedded Systems, Pearson Education Asia, New
Delhi, 2003.
2. Rafi Quazzaman M, Microprocessors Theory and Applications: Intel and Motorola prentice Hall of India, Pvt. Ltd., New Delhi, 2003.
Max.Marks: 80 Exam Duration: 3 hrs.



SAUX 1003 AUTOMOTIVE DIESEL ENGINES
3 0 0 3 100
UNIT I BASIC THEORY 10 hrs.

Diesel engine construction and operation, two stroke and four stroke diesel engine, dual cycle engines, diesel
cycle, fuel-air and actual cycle analysis, diesel fuel, ignition quality, Cetane number, diesel fuels standards and
specifications.
UNIT II FUEL INJECTION SYSTEM 10 hrs.

Types of fuel injection system, Requirements, air and solid injection, functions of components, jerk and distributor
type pumps common rail system, PTFI system pressure waves, injection lag, unit injector, mechanical and pneumatic
governors, fuel injector, types of injection nozzle, spray characteristics, injection timing, pump calibration.
UNIT III AIR MOTION, COMBUSTION AND COMBUSTION CHAMBERS 10 hrs.

Importance of air motion, swirl, squish and turbulence, swirl ratio, fuel air mixing, stages of combustion, delay
period, factors affecting delay period, knock in CI engines. Combustion chamber: design requirements, direct and
indirect injection combustion chambers, M type combustion chamber. Introduction -Inlet Manifold, Construction with
reference to Efficiency.
UNIT IV SUPERCHARGING AND TURBOCHARGING 10 hrs.

Necessity and importance of supercharger, types of supercharging and turbo charging, relative merits, design
of Turbo charger Variable Geometrical Techniques, exhaust gas recirculation, charge cooling & Lubrication.
UNIT V DIESEL ENGINE TESTING AND PERFORMANCE 10 hrs.

Automotive and stationary diesel engine testing and related emission standards. Engine performance and emission
characteristics, variables affecting engine performance and emission, methods to improve engine performance, heat
balance, performance maps. Engine management systems, CRDI, etc., Performance, Emission, Calculation& Testing
of Emissions, Heat Release Analysis.
TEXT BOOKS:
1. Ganesan. V Internal Combustion Engines, Tata McGraw-Hill Publishing Co., New Delhi, 2003.
2. Mathur D.S. and Sharma R. P. A course in Internal Combustion Engines, Dhanpat Rai and Sons, 2002.
REFERENCES:
1. Ramalingam. K.K. Internal Combustion Engines Theory and Practice, SciTech Publications (India) Pvt. Ltd. 2002.
2. Heywood. J.B. Internal Combustion Engine Fundamentals, McGraw-Hill Book Co., 1988.
3. Heinz Heister Advanced Engine Technology, SAE, 1995.
4. Pulkrabek Engineering Fundamentals of the Internal Combustion Engines, Practice Hall of India 2003.



SMEX 4008 MATERIAL TESTING LAB
0 0 4 2 100
1. Evaluation of engineering stress/ strain diagram on steel rod, Thin Wire and Twisted bars under tension.
2. Compression Test on bricks. Concrete blocks.
3. Deflection Test - Verification of Maxwell theorem.
4. Comparison of hardness values of Steel, Copper and aluminum using Brinell and Rockwell hardness measuring
machines.
5. Estimation of spring constant. Under tension and compression.
6. Estimation of notch toughness of steel using a Charpy / Izod impact testing machine.
7. Double shear test in U.T.M.
8. Hardness values of Steel, Copper and aluminum using Vickerss hardness tester.
9. Load measurement using Load indicator, Load coils.
10. Strain Measurement using Rosette Strain Gauge.

SECX 4014 ELECTRONICS & MICROPROCESSOR LAB
0 0 4 2 100
ELECTRONICS LAB
1. Study of logic gates.
2. Half and Full adder/ Subtractors.
3. Grey code converter
4. Ripple Counters and Mod N Counters.
5. Encoders and decoders.
6. Multiplexers & Demultiplexers.
MICROPROCESSOR AND MICROCONTROLLER LAB

Using Microprocessor - 8085
1. Programs based on Arithmetic operations

2. Programs based on sorting
3. Interfacing of stepper motor.
4. Interfacing ADC and DAC.
5. Interfacing Traffic light control.
Using Microcontroller - 8051
6. Programs based on Arithmetic operations

7. Programs based on sorting
8. Interfacing of stepper motor.
9. Interfacing Traffic light control

APPLIED NUMERICAL METHODS L T P Credits Total Marks

SMTX1011 (Common to Mech, M & P, Aero, Auto, Civil, Chem, E&I,
3 1 0 4 100
ECE, EEE, E&C and ETCE)
UNIT I CURVE FITTING AND RELATION BETWEEN OPERATORS 10 hrs.

Curve Fitting-Method of group averages-Principle of least squares-Method of moments-Finite Differences-Operators
E & D-Relationship between operators.
UNIT II INTERPOLATION 10 hrs.

Interpolation-Newtons method-Lagranges method-Numerical Differentiation and Integration-Trapezoidal and
Simpsons Rule-Finite Difference Equations.
UNIT III ALGEBRAIC AND TRANSCENDENTAL EQUATIONS 10 hrs.

Numerical solution of Algebraic and Transcendental Equations-Regula Falsi method-Newton Raphson
method-Graffes Root Squaring method-Simultaneous linear algebraic equations- Gauss Jordan method-Crouts
method-Gauss Seidel method-Relaxation method.
UNIT IV ORDINARY DIFFERENTIAL EQUATIONS 10 hrs.

Numerical solution of Ordinary Differential Equations-Taylors series-Modified Eulers method-Runge Kutta method
of fourth order-Predictor-Corrector methods-Milnes method-Adams Bashforth method.
UNIT V PARTIAL DIFFERENTIAL EQUATIONS 10 hrs.

Numerical solution to Partial Differential Equations-Classification-Elliptic equations-Poissons equations-Leibmanns
iteration procedure-Parabolic equation-Bender Schmidt Scheme-Crank Nicholsons Scheme-Hyperbolic equations.

1. Kandasamy P & Co., Numerical Methods, S.Chand & Co., New Delhi, 2003.
2. Venkataraman M.K., Engineering Mathematics First Year, 2nd Edition, National Publishing Co., 2000.
3. Grewal, B.S., Higher Engineering Mathematics, 35th Edition, Khanna Publishers, Delhi, 2000.
4. Balgurusamy .E, Numerical Methods, Tata McGraw Hill, New Delhi, 2006.
5. Steven C.Chapra, Raymond P. Canale, Numerical Methods for Engineers, Tata McGraw Hill, New Delhi, 2003.


MEASUREMENTS AND METROLOGY L T P Credits Total Marks

SPRX1044
(Common to Mech, Mech & Prod, Auto) 3 0 0 3 100
UNIT I CONCEPT OF MEASUREMENT 10 hrs.

General concept- Methods of measurement- Generalised measurement system- Classification of instruments-
Errors-systematic and random errors-correction, calibration-parameters associated with measurements like precision,
accuracy, readability, span and range, hysteresis- sensors and transducers-mechanical and electrical type.
UNIT II MEASUREMENT OF POWER, PRESSURE, TEMPERATURE AND FLOW 10 hrs.

Power, Force and Torque-mechanical, hydraulic, pneumatic and electrical type- Pressure- low pressure
measurement using Mc Leod gauge, thermal conductivity gauge and ionization gauges-high pressure measurement
using diaphragm gauges and bulk modulus pressure gauge. Temperature- thermo couple, RTD, thermistor and
pyrometers.
Flow- Turbine type flowmeter, magnetic flowmeter, ultra sonic flow meter, thermal flowmeter and hot wire
anemometer.
UNIT III LINEAR AND ANGULAR MEASUREMENT 10 hrs.

Definition of Metrology- Linear measuring instruments: vernier, micrometer internal measurement, slip gauges
and classification, interferometry, optical flats, introduction to limits, fits, tolerance and gauging, limit gauges- Comarators:
mechanical, pneumatic, electrical and optical types, applications.
Angular measurements: sine bar, optical bevel protractor, angle decker- Taper measurements, Autocollimeter.
UNIT IV FORM MEASUREMENT 10 hrs.

Measurement of screw threads- Terminology of screw threads, measurement of major and minor diameter, pitch,
flank angle and effective diameter of screw threads, floating carriage micrometer- measurement of gears-tooth
thickness-constant chord and base tangent method-Gleason and Parkson gear testing machines- Radius
measurement-Surface finish, straightness, flatness and roundness measurements.
UNIT V LASER AND ADVANCES IN METROLOGY 10 hrs.

Precision instruments based on laser principles- laser interferometer-application in linear and angular
measurements and machine tool metrology Coordinate measuring machine (CMM) Constructional features- types,
applications-digital devices-computer aided inspection.
TEXT BOOKS
1. T.G. Beckwith and Marangoni, Mechanical Measurements, Addison Wesley, 2000.
2. R.K. Jain, Engineering Metrology, Khanna Publishers, 1994.
REFERENCES
1. Alsutko, Jerry.D.Faulk, Thomson, Industrial Instrumentation, Asia Pvt Ltd, 1988.
2. Sirohi, Mechanical Measurements, New Age Publications., 1998
3. S.C. Gupta., Engineering Metrology, Dhanpat Rai Publications, 1984.
4. Gaylor & Shotbolt, Engineering Metrology, Mc Donald & Co Publications., 1994



SMEX1006 MATERIAL TECHNOLOGY
3 0 0 3 100

Basic Principles: Crystal structures BCC FCC HCP Methods to determine crystal structure Atomic radius
APF Allotropy Solid solution Intermetallic compounds
Phase diagrams: Solidification of metals, phase rules, construction of phase diagram, Isomorphous, eutectic diagram
showing partial solid solubility, peritectic system. Non-equilibrium cooling of above types of alloys Equilibrium solid
state reactions.
UNIT II FERROUS AND NON-FERROUS ALLOYS 10 hrs.

Fe-Fe3C diagram, Cooling Curves of pure Fe, Critical points in Fe Fe3C equilibrium diagrams, Phase changes.
Simple calculation of amount of phases. Plain carbon steels, Effect of alloying elements on steel, Alloy steel, IS
designation of steels classification of cast iron ,Properties and Uses
Composition and uses of important aluminium based alloys, copper based alloys and Nickel based alloys.
UNIT III HEAT TREATMENT OF STEEL 10 hrs.

Non-equilibrium transformation of austenite Annealing, Normalizing, spheroidizing, TTT diagram. Continuous
cooling transformation diagram Hardening and tempering, martempering, austempering Hardenability and its
determination Surface hardening processes. Heat treatment of non-ferrous alloys Age hardening, precipitation
hardening
UNIT IV POWDER METALLURGY 10 hrs.

Introduction, Methods of production of metal powder mixing blending compacting sintering hot pressing
secondary and finishing operations Advantages and applications.
UNIT V MECHANICAL PROPERTIES AND TESTING 10 hrs.

Elastic and plastic deformation of metals elastic effects Deformation by slip Tensile test Stress strain
curve for mild steel & brittle material, determination of yield, ultimate stresses, and percentage elongation- Impact
tests. Ductile Brittle transition fatigue and creep Stress cycle for fatigue testing, endurance limit. Fatigue limit, S-N
Curve, Creep Curve
Fracture: Ideal fracture, brittle fracture, Griffiths theory fracture toughness, ductile failure cup and cone. Type
of fracture. Fatigue failure, crack propagation.
TEXT BOOKS
1. Avener S.H, Introduction to Physical Metallurgy, 2nd Edition,McGraw Hill, NY,1990
REFERENCE BOOKS:
1. Raghavan V.,Material Science and Engineering, 5th Edition,Prentice Hall, 2005
2. Khurmi R.S., Sedha R.S, Material Science,4th Edition,S. Chand & Co.,2009
3. Dieter G.E, Mechanical Metallurgy, 3rd Edition, McGraw Hill, 1986



SAUX 1004 AUTOMOTIVE ELECTRICAL AND ELECTRONICS
3 0 0 3 100
UNIT I BATTERIES, LIGHTING SYSTEM & ACCESSORIES 10 hrs.

Principles and construction of lead-acid battery. Characteristics of battery, rating capacity and efficiency of
batteries. Various tests on battery condition, charging methods. Constructional aspect of alkaline battery. Insulated &
earth return systems. Positive & negative earth systems. Details of head light & side light .Headlight dazzling &
preventive methods. Electrical fuel-pump, Speedometer, Fuel, oil & temperature gauges, Horn, Wiper system ,Trafficator.
UNIT II STARTING SYSTEM &CHARGING SYSTEM 10 hrs.
Condition at starting. Behavior of starter during starting. Series motor and its characteristics. Principle & construction
of starter motor. Working of different starter drive units, care and maintenance of starter motor. Starter Switches. Generation
of direct current. Shunt generator characteristics. Armature reaction. Third brush regulation. Cut-out. Voltage &current
regulators. Compensated voltage regulator alternators principle & constructional aspects and bridge benefits.
UNIT III IGNITION SYSTEMS &FUEL INJECTION AND IGNITION SYSTEMS 10 hrs.
Types, Construction & working of battery coil and magneto ignition systems. Relative merits, Centrifugal and
vacuum advance mechanisms, types and construction of spark plugs, electronic ignition systems. Electronic Introduction,
feed back carburetor systems. Throttle body injection and multi port or point fuel injection, fuel injection systems,
Injection system controls. Advantages of electronic ignition systems: Types of solid-state ignition systems and their
principle of operation, Contact less electronic ignition system, and electronic spark timing control.
UNIT IV AUTOMOTIVE ELECTRONICS &DIGITAL ENGINE CONTROL SYSTEM 10 hrs.
Current trends in modern automobiles, Open and close loop systems-Components for electronic engine
management .Electronic management of chassis system. Vehicle motion control. Open loop and closed loop control
systems-Engine cranking and warm up control-Acceleration enrichment-Deceleration leaning and idle speed control.
Distributor less ignition-Integrated engine control systems, Exhaust emission control engineering. Electronic dashboard
instruments-Onboard diagnosis system, security and warning system.
UNIT V SENSORS AND ACTUATORS 10 hrs.
Basic sensor arrangement, Types of sensors such as Oxygen sensors, Crank angle position sensors-Fuel
metering, vehicle speed sensor and detonation sensor, Altitude sensor, flow sensor, Throttle position sensors. Solenoids,
stepper motors, and relays.
REFERENCES:
1. Judge. A.W., Modern Electrical Equipment of Automobiles, Chapman & Hall, London, 1992.
2. Young. A.P., & Griffiths. L., Automobile Electrical Equipment, English Language Book Society & New Press, 1990.
3. Vinal. G.W. , Storage Batteries, John Wiley & Sons Inc., New York, 1985.
4. Crouse. W.H. , Automobile Electrical Equipment, McGraw Hill Book Co Inc., New York, 1980
5. Spreadbury. F.G. Electrical ignition Equipment, Constable & Co. Ltd., London 1962.
6. Kholi. P.L., Automotive Electrical Equipment, Tata McGraw-Hill Co. Ltd. New Delhi, 1975.
7. Automotive Hand Book, Robert Bosch, Bently Publishers, 1997.
8. William B. Ribbens, Understanding Automotive Electronics, 5th Edition, Butterworth, Heinemann Woburn, 1998.
9. Tom Weather Jr and Cland C. Hunter, Automotive Computers and Control System, Prentice Hall Inc., New Jersey.
10. Young. A.P. and Griffths. L. Automobile Electrical Equipment, English Language Book Society and New Press.
11. Crouse. W.H., Automobile Electrical equipment, McGraw Hill Book Inc., New York,1955.
12. Robert N Brady Automotive Computers and digital Instrumentation reston Book, Prentice Hall, Eagle Wood Cliffs, New Jersy,
13. Bechtold, Understanding Automotive electronics, SAE, 1998.
14. T.Mellard Automotive Electronics.


SAUX 1005 AUTOMOTIVE ENGINE COMPONENTS DESIGN
3 1 0 4 100

Engineering material and their physical properties applied to design, selection of materials, factor of safety,
endurance limit, notch sensitivity, principles of design optimization, future trends, computer aided drafting.
UNIT II LIMITS, FITS, TOLERANCES, SURFACE FINISH, SHAFTS AND SPRINGS 10 hrs.
Definitions, types of tolerances and fits, design considerations for interference fits, surface finish, surface
roughness, design of power transmission shafts, design of helical springs.
UNIT III DESIGN OF CYLINDER AND PISTON 10 hrs.

Choice of material for cylinder and piston, piston friction, piston slap, design of cylinder, piston, piston pin, piston
rings, piston failures, lubrication of piston assembly.
UNIT IV DESIGN OF CONNECTING ROD, CRANKSHAFT 10 hrs.

Material for connecting rod, determining minimum length of connecting rod, small end and big end design, shank
design, design of big end cap bolts, connecting rod failures, balancing of I.C. Engines, significance of firing order,
material for crankshaft, design of crankshaft under bending and twisting, balancing weight calculations.
UNIT V DESIGN OF VALVES AND FLYWHEEL 10 hrs.

Design aspects of intake and exhaust manifolds, inlet and Exhaust valves, valve springs, tappets, valve train.
Materials and design of flywheel.
TEXT BOOKS
1. Jain.R.K, Machine Design, Khanna Publishers, New Delhi, 1997.
2. Design Data Book, PSG College of Technology, Coimbatore, 2000.
REFERENCES
1. Heldt.P.M High Speed Combustion Engines, Oxford-IBH Publishing Co., Calcutta, 1965.
2. Kolchin.A and Demidov.V, Design of Automotive Engines, MIR Publishers, Moscow, 1984.
3. Sundararaja Murthy T.V Machine Design, Khanna Publishers, New Delhi, 1991.

PART B : (70% Problem & 30% Theory) - 2 Questions from each unit with internal choice,


SAUX 1006 AUTOMOTIVE CHASSIS
3 0 0 3 100

Types of chassis lay out with reference to power plant locations and drives, vehicle frames, various types of
frames, constructional details, materials, testing of vehicle frames, unitized frame body construction. Frame repairs and
alignment checking frame alignment.
UNIT II FRONT AXLE AND STEERING SYSTEM 10 hrs.

Types of front axles, construction details, materials, front wheel geometry: castor, camber, king pin inclination,
toe in condition for true rolling motion of wheels during steering, steering geometry, Ackermann and Davis steering
system, constructional details of steering linkages, different types of steering gear boxes, steering linkages and layouts,
turning radius, wheel wobble, power assisted steering, steering of crawler tractors. Overall steering ratio power
steering Centre point steering, Hard steering - Looseness in steering
UNIT III DRIVE LINE 10 hrs.

Effect of driving thrust and torque reactions, Hotchkiss drive, torque tube drive and radius rods, propeller shaft,
universal joints, front wheel drive, different types of final drive , double reduction and twin speed final drives, differential
principle, construction details of differential unit, non slip differential locks, differential housings, construction of rear
axles, types of loads acting on rear axle , fully floating , three quarter floating and semi floating rear axles housing,
construction of different types of axle housings, multi axle vehicles. Final Drive Differential: Worm and worm wheel,
Straight bevel gear, Spiral bevel gear and hypoid gear final drives.
UNIT IV SUSPENSION SYSYTEM 10 hrs.

Need of suspension system, type of suspension , suspension springs, constructional details and characteristics
of leaf, coil and torsion bar springs, independent suspension, rubber suspension, pneumatics suspensions, shock
absorbers. Torque reaction, Hotchkiss drive torque tube drive, air suspension system
UNIT V BRAKING SYSTEM 10 hrs.

Classification of brakes, drum brakes and disc brakes, constructional details, theory of braking, concept of dual
brake system, parking brake, material, hydraulic system, vacuum assisted system, air brake system, anti lock braking,
retarded engine brakes, eddy retarders, master cylinder, slave cylinder, servo action and self energizing brakes.
REFERENCES:
1. Heldt.P.M., Automotive Chassis, Chilton Co., New York, 1990.
2. Steed.W., Mechanics of Road Vehicles, IIIiffe Books Ltd., London, 1960.
3. Newton. Steeds & Garrot.Motor Vehicles, Butterworths, London, 1983.
4. Judge.A.W.Mechanism of the car, Chapman and Halls Ltd., London1986.
5. Giles.J.G., Steering Suspension and tyres, IIIiffe Book Co., London, 1988.
6. Crouse.W.H, Automotive Chassis and Body, McGraw Hill New York, 1971
Max Mark: 80. Exam Duration: 3 hrs



SAUX 1007 VEHICLE DYNAMICS
3 0 0 3 100

Classification of vibrations- Mechanical vibrating systems, Single degree of freedom, two degree of freedom,
free, forced and damped vibrations, modeling and simulation studies, model of an automobile, magnification factor,
transmissibility, vibration absorber.
UNIT II MULTI DEGREE FREEDOM SYSTEMS 10 hrs.

Closed and coupled far system, determination of mass & stiffness matrix-Eigen value problems- -orthogonality
of mode shapes, modal analysis.
UNIT III STABILITY OF VEHICLES 10 hrs.

Load distribution, stability on a curved track slope and a banked road, calculation of tractive effort and reactions
for different drives.
UNIT IV SUSPENSION TYRES AND VEHICLES HANDLING 10 hrs.

Requirements, sprung mass frequency, wheel hop, wheel wobble, wheel shimmy, choice of suspension spring
rate, calculation of effective spring rate, vehicle suspension in fore and aft, roll axis and vehicle under the action of
side forces, the dynamics, tire dynamics, ride characteristics power consumed by a tire. Over steer, under steer,
steady state cornering, effect of braking, driving torques on steering, effect of camber, transient effects in cornering.
UNIT V NUMERICAL METHODS 10 hrs.

Approximate methods for determining fundamental frequency, Dunkerleys lower bound, Rayleigh upper bound,
Holzer method for closed coupled system and branched system.
TEXT BOOKS
1. Giri N.K Automobile Mechanics, Khanna Publishers, 2002.
2. Rao J.S and Gupta. K Theory and Practice of Mechanical Vibrations, Wiley Eastern Ltd., New Delhi -2, 2002.
REFERENCES:
1. Heldt.P.M -Automotive Chassis- Chilton Co., New York- 1992
2. Ellis.J.R - Vehicle Dynamics- Business Books Ltd., London- 1991
3. Giles.J.G.Steering - Suspension and Tyres,- Illiffe Books Ltd., London- 1998
4. Ham B, Pacejka - Tyre and Vehicle Dynamics - SAE Publication - 2002.
5. Gillespie T.D, Fundamentals of Vehicle Dynamics, SAE USA 1992.

PART B : (70% Theory & 30% Problem) - 2 Questions from each unit with internal choice,

AUTOMOTIVE ENGINE COMPONENTS LAB AND L T P Credits Total Marks

SAUX 4002
AUTOMOTIVE CHASSIS COMPONENTS LAB 0 0 4 2 100
AUTOMOTIVE CHASSIS COMPONENTS LAB

1. Study and measurement of the following chassis frames
1. Heavy duty vehicle frame (Leyland, Tata etc).
2. Light duty vehicle frame (Ambassador, Maruti van etc).
2. Study, dismantling and assembling of
1. Front Axle.
2. Rear Axle.
3. Differential.
4. Steering systems along with any two types of steering gear box.
5. Braking systems hydraulic servo vacuum, compressed air power brakes.
6. Leaf spring, coil spring, torsion bar spring, Hydraulic shock absorber.
3. Study, Dismantling and Assembling of
1. Clutch assembly of different types.
2. Gear Box.
3. Transfer case.
AUTOMOTIVE ENGINE COMPONENTS LAB
1. Dismantling of 4 cylinder petrol engine.
2. Assembling of 4 cylinder petrol engine.
3. Dismantling of 6 cylinder diesel engine.
4. Assembling of 6 cylinder diesel engine.
5. Study of oil filter, fuel filter, fuel injection system, carburetor, MPFI.
6. Study of ignition system components coil, magneto and electronic ignition systems.
7. Study of engine cooling system components.
8. Study of engine lubrication system components.
9. Ovality and taper measurement of cylinder bore and comparison with standard specifications.
10. Ovality and taper measurement of engine crank shaft and comparison with standard specification.
AUTOMOTIVE ELECTRICAL AND ELECTRONICS L T P Credits Total Marks
SAUX 4003
LAB 0 0 4 2 100
AUTO ELECTRICAL
1. Testing of batteries and battery maintenance.
2. Testing of starting motors and generators.
3. Testing of regulators and cut outs.
4. Diagnosis of ignition system faults.
5. Study of Automobile electrical wiring.
AUTO ELECTRONICS
1. Study of rectifiers and filters.
2. Study of logic gates, adder and flip-flops.
3. Study of SCR and IC timer.
4. Interfacing A/D converter and simple data acquisition.
5. Micro controller programming and interfacing.

RESOURCE MANAGEMENT TECHNIQUES L T P Credits Total Marks

SMEX1017
UNIT I INTRODUCTION AND LINEAR PROGRAMMING 10 hrs.

Operations Research(OR)-Nature-Characteristics-Phases.-Role of OR in Decision making- Outline of OR Models
Linear Programming Formulation of L.P.problems Solution by graphical method, simplex method, and big M methods
Applications of O.R. in production management
UNIT II TRANSPORTATION AND ASSIGNMENT MODEL 10 hrs.

Transportation problem Initial Basic feasible solution- Northwest corner method, Least Cost method, Vogels
approximation method Test for optimality-MODI method
Assignment problems- Hungarian assignment models- Travelling salesman problems
UNIT III RESOURCE SCHEDULING AND NETWORK ANALYSIS 10 hrs.

Problem of Sequencing Problem with N jobs and 2 machines N Jobs 3 m/cs and 2 Jobs m m/cs (Graphical
method). Project Management Basic concepts Network construction and scheduling CPM & PERT Program
evaluation and resource leveling by network techniques, time Cost trade off.
UNIT IV INVENTORY CONTROL AND SIMULATION 10 hrs.

Inventory Control Various Types of inventory models deterministic inventory models Production model,
Purchase model with and without shortage- EOQ Buffer stock Shortage quantity, Probabilistic inventory models
Quantity Discount and Price Breaks Simulation Use, advantages & limitations, Monte Carlo simulation, application
to queuing, inventory & other problems
UNIT V QUEUEING THEORY, GAME THEORY AND REPLACEMENT MODELS 10 hrs.

Queuing theory Poisson arrivals and exponential service times, Single channel models only. Game theory-Pay
off matrix, competitive games with pure strategy, minimax criterion, principles of dominance &mixed strategies
Replacement policy for items whose maintenance cost increases with time- Consideration of time value of money-
Replacement policy- Individual, Group replacement of items that fail completely
TEXT BOOK:
1. Kanti Swarup, P.K.Gupta, & Manmohan., Operations Research S. Chand & Sons.
REFERENCE BOOKS:
1. S.D.Sharma,Operations Research, Kedarnath Ramnath& Co, 2002.
2. Hamdy A. Taha, Operations Research, 5th Edn., PHI, 1995
3. Hiller & Liberman,Introduction to operation research, 5th Edn., McGraw Hill, 2001.
4. Ravindran,Phillips&Solberg, Operations Research: principles and practice, 2nd Edn., Wiley India Lts, 2007



SAUX 1008 VEHICLE MAINTENANCE
3 0 0 3 100
UNIT I MAINTENANCE OF RECORDS AND SCHEDULES 10 hrs.

Importance of maintenance, preventive (scheduled) and break down (unscheduled) maintenance, requirements
of maintenance, and preparation of check lists. Inspection schedule, maintenance of records, log sheets and other
forms, safety precautions in maintenance.
UNIT II ENGINE MAINTENANCE REPAIR AND OVERHAULING 10 hrs.

Dismantling of engine components and cleaning , cleaning methods, visual and dimensional inspections, minor
and major reconditioning of various components, reconditioning methods, engine assembly, special tools used for
maintenance , overhauling, engine tune up.
UNIT III CHASSIS MAINTENANCE REPAIR AND OVERHAULING 10 hrs.

Mechanical and automobile clutch and gear box, servicing and maintenance servicing of propeller shaft and
differential system. Maintenance, servicing of suspension system. Brake systems, types and servicing techniques.
Steering systems, overhauling and maintenance. Wheel alignment, computerized alignment and wheel balancing.
UNIT IV ELECTRICAL SYSTEM MAINTENANCE SERVICING AND REPAIRS 10 hrs.

Testing methods for checking electrical components, checking battery, starter motor, charging systems, DC
generators and alternators, ignition system, lighting system. Fault diagnosis and maintenance of modern electronic
controls, checking and servicing of dash board instruments
UNIT V MAINTENANCE OF FUEL SYSTEM, COOLING SYSTEMS, LUBRICATION SYSYTEM AND

VEHICLE BODY 10 hrs.
Servicing and maintenance of fuel system of different types of vehicles, calibration and tuning of engine for
optimum fuel supply. Cooling systems, water pump, radiator, thermostat, anticorrosion and antifreeze additives.
Lubrication maintenance, lubricating oil changing, greasing of parts. Vehicle body maintenance, minor and major repairs.
Door locks and window glass actuating system maintenance. New technologies, processes and trends in the area of
vehicle diagnostics
REFERENCES:
1. Jack E Rjavee Automotive Technology- A system approach, Thomson Asia Pvt Ltd. Singapore, 3rd edition 2004
2. De A Automobile Engineering, Galgotia Publishers Pvt Ltd, 2004
3. Ramalingam K. K, Automobile Engineering, SciTech Publications Pvt. Ltd., 2005
4. Joseph Heitner, Automotive Mechanics Principle and Practice East west press, 2nd Edition 1999



SAUX 1009 AUTOMOTIVE POLLUTION AND CONTROL
3 0 0 3 100

History back ground, exhaust gas pollutants, Vehicle population assessment in metropolitan cities and contribution
to pollution, effect on human health and environment, global warming, type of emission, transient operational effect
on pollution
UNIT II POLLUTANT FORMATION IN S.I ENGINES 10 hrs.

Pollutant formation in SI engines, mechanism of HC and CO formation in four stroke and two stroke SI engines,
NOx formation in SI engine ,effects of design and operating variables on emission formation, control of evaporative
emission. Two stroke engine pollution.
UNIT III POLLUTANT FORMATION IN C.I ENGINES 10 hrs.

Pollutant formation in CI engines, smoke and particulate emissions in CI engines, effects of design and operating
variables on CI engines emissions. NOx formation and control. Noise pollution from automobiles, measurement
standards. Smoke & smoke measurements, particulate emission Diesel pollution control methods CO UBHC
Low heat rejection engine.
UNIT IV: CONTROL OF EMISSION FROM SI AND CI ENGINES 10 hrs.

Design of engine, optimum selection of operating variables for control of emissions, EGR, thermal reactors,
secondary air injection, catalytic converters, catalyst, fuel modifications, fuel cells, two stroke engine pollution controls.
Supply of fuel establishment of national test centers, construction of road networks. Estimation of petroleum reserve
need for alternate fuels Merits & Demerits and uses of CNG, LPG, Alcohols, Hydrogen, Bio-fuels, Electric Energy,
Solar Energy. Noise control & vibration control muffler.
UNIT V MEASUREMENT TECHNIQUES EMISSION STANDARDS & TEST PROCEDURE 10 hrs.

NDIR, FID, Chemiluminescent analyzers, gas chromatograph, smoke meters, emission standards, driving cycles
USA, JAPAN, Euro and India. Test procedures ECE, FTP tests. SHED test chassis dynamometers, dilution
tunnels. Measurements of invisible emissions -ORSAT apparatus, Evaluation of Emission Standards Mandatory Tests
for Emission measurement Type Approval & Production Conformity Tests Driving Cycles, Bharat Stages & Euro
emission standards.
REFERENCE:
1. Pundir.B.P, Engine Emissions, Narosa Publishing House, 2007.
2. Ganesan.V, Internal Combustion Engines, Tata McGraw Hill Co., 2004.
3. Ramalingam.K.K, Automobile Engineering, Scitech Publications Pvt. Ltd., 2005
4. Amitosh De, Automobile Engineering, Galgotia Publications Pvt. Ltd., 2004
5. Dr.Giri.N.K, Automobile Mchanics, Khanna Publishers, 2006
6. Heywood. J.B., Internal Combustion Engine Fundamentals, McGraw Hill Book Co.,1995.
7. Automobiles and Pollution SAE Transaction, 1995.



SAUX 1010 AUTOMOTIVE TRANSMISSION
3 0 0 3 100
UNIT I CALCULATION OF GEAR RATIO & FLUID COUPLING 10 hrs.

Gear Box: method of calculation of gear ratios for vehicles, performance characteristics in different speeds,
different types of gear boxes, speed synchronizing devices, gear materials, lubrication. Fluid coupling: advantages and
limitations, construction details, torque capacity, slip in fluid coupling, performance characteristics. Means used to reduce
drag torque in fluidcoupling.
UNIT II TYPES OF GEAR BOXES 10 hrs.

All spur and internal gear type planetary gearboxes, Ford T-model, Cotal and Wilson Gear box, determination
of gear ratios, automatic overdrives.
UNIT III TORQUE CONVERTERS 10 hrs.

Principal of torque conversion, single, multi stage and polyphase torque converters, performance characteristics,
constructional and operational details of typical hydraulic transmission drives (e.g.) Leyland, White Hydro torque drives.
UNIT IV AUTOMATIC TRANSMISSION 10 hrs.

Automatic transmission: relative merits and demerits when compared to conventional transmission, automatic
control of gears, study of typical automatic transmissions, Ford and Chevrolet drive, automatic control of gear box.
UNIT V HYDROSTATIC DRIVES & ELECTRICAL DRIVES 10 hrs.

Hydrostatic drives: advantages and disadvantages, principles of hydrostatic drive systems, construction and
working of typical hydrostatic drives, Janney Hydrostatic drive. Electrical drives: advantages and limitations, principles
of Ward Leonard system of control Modern electric drive for buses and performance characteristics.
TEXT BOOKS
1. Heldt P.M - Torque converters- Chilton Book Co.-1992
2. Newton and Steeds - Motor Vehicle- Illiffee Publisher- 2000
REFERENCE
1. Design Practices, passenger Car Automotive Transmissions- SAE Hand book- 1994.



SAUX 4004 VEHICLE MAINTENANCE LAB
0 0 4 2 100
1. Study and layout of an automobile repair, service and maintenance shop.
2. Study and preparation of different statements/records required for the repair and maintenance works.
3. Study and preparation of the list of different types of tools and instruments required.
4. Minor and major tune up of gasoline and diesel engines.
5. Fault diagnosis in electrical ignition system, gasoline fuel system, diesel fuel system and rectification.
6. Study of the electrical systems such as head lights, side or parking lights, trafficator lights, electric horn system,
windscreen wiper system, starter system and charging system.
7. Study and checking of wheel alignment.
8. Simple tinkering, soldering works of body panels, study of door lock and window glass rising mechanisms.
9. Practice the following:
(i) Adjustment of pedal play in clutch, brake, hand brake lever and steering wheel play.
(ii) Air bleeding from hydraulic brakes, air bleeding of diesel fuel system.
(iii) Wheel bearings tightening and adjustment.
10. Practice the following:
(i) Adjustment of head lights beam.

(ii) Removal and fitting of tyre and tube.

SAUX 4005 TWO WHEELER AND THREE WHEELER LAB
0 0 4 2 100
TWO - WHEELER
1. Road performance test of a two wheeler using chassis dynamometer.
2. Performance test of a shock absorber.
3. Performance test on coil spring.
4. Two wheeler chain tension test.
5. Brake and Clutch adjustment as per specification.
6. Dismantling and assembling of two wheeler gear box and finding gear ratio.
THREE - WHEELER
1. Dismantling and assembling of three wheeler gear box and finding gear ratios.
2. Three wheeler brake and clutch play adjustment.
3. Dismantling and assembling of three wheeler steering system.
4. Study of three wheeler chassis frame and power transmission system.


SAUX 1011 AUTOMOTIVE CHASSIS DESIGN
3 1 0 4 100
UNIT I CLUTCH DESIGN CALCULATION 10 hrs.

Design of single plate clutch, multi plate clutch, design of centrifugal clutch, cone clutch, energy dissipated,
torque capacity of clutch, design of clutch components, design details of roller and diaphragm type of clutches
UNIT II GEAR BOX 10 hrs.

Performance of vehicle, total resistance to motion, traction and tractive effort, acceleration, calculation of gear
ratio, design of three speed gear box, design of four speed gear boxes.
UNIT III VEHICLE FRAME AND SUSPENSION 10 hrs.

Study of loads, moments and stresses on frame members, computer aided design of frame for passenger and
commercial vehicles, computer aided design of leaf springs, coil springs and torsion bar springs.
UNIT IV FRONT AXLE AND STEERING SYSTEMS 10 hrs.

Analysis of loads, moments and stresses at different sections of front axle, determination of loads at kingpin
bearings, wheel spindle bearings, choice of bearings, determination of optimum dimensions and proportions for steering
linkages ensuring minimum error in steering.
UNIT V FINAL DRIVE AND REAR AXLE 10 hrs.

Design of propeller shaft, design details of final drive gearing, design details of full floating, semi-floating and
three quarter floating rear shafts and rear axle housings.
TEXT BOOKS:
1. Giri.N.K- Automobile Mechanics- Khanna Publisher, New Delhi- 2002
REFERENCES:
1. Heldt.P.M - Automotive Chassis- Chilton Co., New York- 1992
2. Steeds. W -Mechanics of Road Vehicles- Illiffe Books Ltd., London- 1990
3. Giles.K.G - Steering, Suspension and tyres- Illiffe Books Ltd., London - 1988
4. Newton Steeds & Garret- Motor Vehicle- Illiffe Books Ltd., London 2000
5. Heldt.P.M- Torque converter - Chilton Book Co., New York - 1982
6. Dean Averns - Automobile Chassis Design- Illiffe Books Ltd 1992



SAUX 1012 VEHICLE BODY ENGINEERING
3 0 0 3 100
UNIT I CAR BODY DETAILS 10 hrs.

Types of car bodies, Visibility: regulations, drivers visibility, tests for visibility, methods of improving visibility and
space in cars. Safety: safety design, safety equipments for cars. Car body construction; design criteria, prototype
making, initial tests, crash tests on full scale model,
UNIT II VEHICLE AERODYNAMICS 10 hrs.

Objectives, Vehicle drag and its types; various types of forces and moments, effects of forces and moments,
side wind effects on forces and moments, Various body optimization techniques for minimum drag, wind tunnel testing:
flow visualization techniques, scale model testing, component balance to measure forces and moments.
UNIT III BUS BODY DETAILS 10 hrs.

Types: mini bus, single Decker, double-decker, two level and articulated bus. Bus body layout; floor height,
engine location, entrance and exit location, seating dimensions. Constructional details: frame construction, double skin
construction, types of metal sections used, Regulations, Conventional and integral type construction.
UNIT IV COMMERCIAL VEHICLE DETAILS 10 hrs.

Types of body; flat platform, drop side, fixed side, tipper body, tanker body, Light commercial vehicle body
types. Dimensions of drivers seat relation to controls. Drivers cab design.
UNIT V BODY MATERIALS, TRIM AND MECHANISMS 10 hrs.

Steel sheet, timber, plastic, GRP, properties of materials; Corrosion, anticorrosion methods, Selection of paint
and painting process, Body trim items, Body mechanisms.
TEXT BOOK:
1. Powloski .J- Vehicle Body Engineering - Business Books Ltd, London -1989
REFERENCES:
1. Giles.J.C. - Body construction and design - Liiffe Books Butterworth & Co. - 1971.
2. John Fenton - Vehicle Body layout and analysis - Mechanical Engg. Publication Ltd., London 1982.
3. Braithwaite.J.B. - Vehicle Body building and drawing - Heinemann Educational Books Ltd., London 1977.



SMEX1021 TOTAL QUALITY MANAGEMENT
3 0 0 3 100

Definition of Quality, Dimensions of Quality, Quality Planning, Quality costs Analysis Techniques for Quality
Costs, Basic concepts of Total Quality Management, Historical Review, Principles of TQM, Leadership Concepts,
Role of Senior Management, Quality Council, Quality Statements, Strategic Planning, Deming Philosophy, Barriers to
TQM Implementation.
UNIT II TQM PRINCIPLES 10 hrs.

Customer satisfaction Customer Perception of Quality, Customer Complaints, Service Quality, Customer
Retention, Employee Involvement Motivation, Empowerment, Teams, Recognition and Reward, Performance Appraisal,
Benefits, Continuous Process Improvement Juran Trilogy, PDSA Cycle, 5S, Kaizen, Supplier Partnership Partnering,
sourcing, Supplier Selection,Supplier Rating, Relationship Development, Performance Measures Basic Concepts,
strategy, Performance Measure.
UNIT III STATISTICAL PROCESS CONTROL (SPC) 10 hrs.

The seven tools of quality, Statistical Fundamentals Measures of central Tendency and Dispersion, Population
and Sample, Normal Curve, Control Charts for variables and attributes, Process capability, Concept of six sigma, New
seven Management tools.
UNIT IV TQM TOOLS 10 hrs.

Benchmarking Reasons to Benchmark, Benchmarking Process, Quality Function Deployment (QFD) House
of Quality, QFD Process, Benefits, Taguchi Quality Loss Function, Total Productive Maintenance (TPM) Concept,
Improvement Needs, FMEA Stages of FMEA.
UNIT V QUALITY SYSTEMS 10 hrs.

Need for ISO 9000 and Other Quality Systems, ISO 9000:2000 Quality System Elements, Implementation of
Quality System, Documentation, Quality Auditing, QS 9000, ISO 14000 Concept, Requirements and Benefits.
TEXT BOOK:
1. Dale H.Besterfiled, et at., Total Quality Management, Pearson Education Asia, 1999. (Indian reprint 2002).
REFERENCES:
1. James R.Evans & William M.Lidsay, The Management and Control of Quality, (5th Edition), South-Western (Thomson Learning),
2002 (ISBN 0-324-06680-5).
2. A.V. Feigenbaum. Total Quality Management, McGraw-Hill, 1991.
3. Oakland.J.S. Total Quality Management Butterworth Hcinemann Ltd., Oxford. 1989.
4. V. Narayana and N.S. Sreenivasan, Quality Management Concepts and Tasks, New Age International 1996.
5. Zeiri. Total Quality Management for Engineers Wood Head Publishers, 1991.



SAUX 1013 HEAT TRANSFER APPLIED TO I.C.ENGINES
3 1 0 4 100
UNIT I CONDUCTION 10 hrs.

Fourier law of conduction, general equation in Cartesian, cylindrical, spherical co-ordinates 1 Dimensional
steady state conduction in solids across plane wall - composite wall - composite cylinder - composite sphere with
convection boundaries, overall heat transfer co-efficient, critical thickness of insulation, conduction with generation,
thermal contact resistance, variable conductivity.
UNIT II CONVECTION 10 hrs.

Forced convection - external flow over a plate; cylinder, sphere & non circular ducts- internal flow through pipes
- annular spaces & non circular conducts. Natural convection from vertical inclined & horizontal surfaces.
UNIT III RADIATION 10 hrs.

Electromagnetic spectrum, black body emission, emissive power, laws of radiation, radiation shape factor, electrical
analogy, radiation shields gas radiation.
UNIT IV HEAT TRANSFER IN IC ENGINES I 10 hrs.

Temperature distribution and thermal stresses in piston, cylinder liner, cylinder head, fins and valves, Heat transfer
correlations for engines. Fin design, radiators and oil coolers.
UNIT V HEAT TRANSFER IN IC ENGINES - II 10 hrs.

Temperature measurement in piston, cylinder liner, cylinder head and engine valves, In cylinder flow measurement
techniques.
TEXT BOOK:
1. Rajput.R.K, Heat and Mass transfer S.Chand & Co
2. Heywood J.B Internal Combustion Engine Fundamentals, McGraw-Hill Book CO., USA - 1995.
REFERENCE BOOK:
1. Kothandaraman C.P. Fundamentals of Heat and Mass Transfer - New Age International (P) Ltd., 1998
2. Sachdeva R.C. Fundamentals of Heat and Mass Transfer - New Age Internationals (P) Ltd.
3. Ozisik N.M., Heat Transfer - McGraw Hill Book Company, 1988.
4. Holman J.P. Heat Transfer McGraw Hill Book Company, 1989
5. Incropa and Dewite, Heat Transfer - John Wiley

Max Mark: 80 Exam Duration: 3 hrs


SAUX 4006 VEHICLE RECONDITIONING LAB
0 0 2 1 50
1. Cylinder reboring checking the cylinder bore.

2. Setting the tool and reboring.
3. Valve grinding, valve lapping.
4. Setting the valve angle and checking for valve leakage.
5. Calibration of fuel injection pump.
6. Wheel alignment testing of camber, caster.
7. Testing kingpin inclination, toe-in and toe-out.
8. Chassis alignment testing.
9. Brake adjustment.
10. Brake bleeding.
COMPUTER AIDED ENGINE DESIGN AND L T P Credits Total Marks

SAUX 4007
CHASSIS DESIGN LAB 0 0 2 1 50
COMPUTER AIDED ENGINE DESIGN LAB

1. Design and drawing of piston.
2. Piston pin and piston rings and drawing of these components.
3. Design of connecting rod small end and big end, shank design, design of big end cap, bolts and drawing of
the connecting rod assembly.
4. Design of crankshaft, balancing weight calculations.
5. Development of short and long crank arms, front end and rear end details, drawing of the crankshaft assembly.
6. Design and drawing of flywheel.
7. Ring gear design, drawing of the flywheel including the development of ring gear teeth.
8. Design and drawing of the inlet and exhaust valves.
9. Design of cam and camshaft, cam profile generation, drawing of cam and camshaft.
10. Design of combustion chamber.
COMPUTER AIDED CHASSIS DESIGN LAB
1. Design of Heavy duty vehicle frame (Leyland, Tata etc).
2. Design of Light duty vehicle frame (Ambassador, Maruti van etc).
3. Design of Front Axle.
4. Design of Rear Axle.
5. Design of Differential.
6. Design of Steering systems along with any two types of steering gear box.
7. Design of Braking systems hydraulic servo vacuum, compressed air power brakes.
8. Design of Leaf spring, coil spring, torsion bar spring, Hydraulic shock absorber.
9. Design of Clutch assembly of different types.
10. Design of Gear Box.

PRINCIPLES OF MANAGEMENT AND L T P Credits Total Marks

SBAX1001
PROFESSIONAL ETHICS 3 0 0 3 100
UNIT I MANAGEMENT FUNCTIONS & STRUCTURE 10 hrs.

Management Definition Basic Function Contribution of Taylor & Fayol. Types of structure Line, staff,
Functional, Committee, Project & Matrix Structures.
Departmentalization Centralization Decentralization span of control. Management By Objectives

Management By Exception.
UNIT II MANAGEMENT OF ORGINASATION 10 hrs.

Forms of Business / Industrial Ownership Sole Trader, Partnership, Company, Performance Appraisal Basic
Principles Pitfalls Methods to Overcome. Industrial Safety Causes of Accidents Cost of Accident How to
minimize Accidents. Plant Layout & Maintenance Need, Types & Managerial Aspects.
UNIT III ORGANISATIONAL BEHAVIOUR 10 hrs.

OB Definition Nature & Scope Contributing Disciplines Importance of OB to Managers. Personality
Definition Theories Factors Influencing Personality. Motivation Definition Theories. Theory X & Y Transactional
Analysis. Morale & Job Satisfaction Factors Influencing Job Satisfaction.
UNIT IV GROUP DYNAMICS 10 hrs.

Group Definition Types Determinants of Group Cohesiveness Communication Process Barriers
Effective Communication. Leadership Theories Factors Contributing to Effective Leadership Role of Trade Union
in Organizations Functions of Trade Union Why Trade Union is required? Types of Trade Union.
UNIT V PROFESSIONAL ETHICS 10 hrs.

Ethics in Workplace Formulation of Ethics Managerial Ethics Managing Ethical Behaviour Codes of
Ethics Encouraging Ethical Behaviour Social Responsibility Spirituality.
TEXT / REFERENCE BOOKS

1. Gupta C.B., Management Theory and Practice, 14th Edition, Sultan Chand & Sons, 2009.
2. Dr. Prasad L.M., Principle & Practice of Management, 7th Edition, Sultan Chand & Sons, 2008.
3. Aswathappa, Organisational Behaviour, 8th Edition, Himalaya Publishing House, 2010.
4. Dr. Prasad L.M., Organisational Behaviour, 4 th Edition, Sultan Chand & Sons, 2008.
5. Harold Koontz, Principles of Management, 1st Edition, Tata McGraw Hill, 2004.


CAD/CAM L T P Credits Total Marks

SPRX1007
(Common to Mech, Mech & Prod) 3 0 0 3 100
UNIT I INTRODUCTION TO CAD/CAM 10 hrs.

The design process Morphology of design, Product cycle Computer Aided Design, Benefits of CAD. Basic
concepts of CAD - principles of computer graphics . CAD/CAM data base development and data base management
systems. Programming and interface hardware computer aided process monitoring - adaptive control, on-line search
strategies.
UNIT II CURVES & SURFACES AND 2D & 3D TRANSFORMATION 10 hrs.
Analytic curves and surfaces, 2D homogenous transformations- translation, rotation, reflection, scaling, shearing
and combined transformation
3D homogenous transformation - translation, rotation, reflection, scaling, shearing and combined transformation
3D viewing transformation panning, rotation, reflection, shearing and zooming
UNIT III COMPUTER AIDED DRAFTING AND SOLID MODELING 10 hrs.
Graphic software: coordinate representation- graphic functions, software standards. Graphical Kernal system (GKS)
- Initial graphics exchange system (IGES) - Graphic packages. Geometric Modeling - Wire frame, Surface and Solid
models - CSG and B-REP Techniques - Features of Solid Modeling Packages
UNIT IV COMPUTER AIDED MANUFACTURING 10 hrs.
Manufacturing Planning and Control - CAD/CAM Integration - Principles of Computer Integrated Manufacturing
- Hierarchical Network of Computers - Local Area Networks - Process Planning - Computer Aided Process Planning
- Retrieval and Generative approaches.
UNIT V COMPUTER AIDED PROCESS PLANNING AND SHOP FLOOR CONTROL 10 hrs.
Computer Integrated Production Management System - Master Production Schedule - Material Requirement
Planning - Inventory Management - Manufacturing and Design Data Base - Capacity Planning - Shop Floor Control
- Functions - Order release - Order Scheduling - Order progress - Factory data collection.
Total: 50 hrs.
1. M.E. Mortenson, Geometric modeling, John Willey & Sons, 1985
2. D.F. Roger and J.A. Adams, Mathematical elements of computer graphics, McGraw Hill, 1990
3. M. P. Groover, Automation, Production Systems and Computer Integrated Manufacturing, Prentice Hall, 2007.
4. P. Radhakrishnan, S. Subramanyan, V. Raju, CAD/CAM/CIM, New Age International Publishers(P) Ltd., 2006.
5. Ibrahim Zeid:CAD/CAM Theory and practice:,tatamcgraw hill corporation co.ltd,1988.
6. Hearn, Donald and M.Pauline Baker, computer Graphics , Prentice Hall 1986

Max Marks: 80 Exam Duration: 3 hrs


SAUX 1014 VEHICLE DESIGN CHARACTERISTICS
3 0 0 3 100

Study and selection of vehicle specifications - Choice of Cycle, fuel, speed, cylinder arrangement, number of
cylinders, method of cooling, material, design variables and operating variables affecting performance and emission.
UNIT II PERFORMANCE CURVES 10 hrs.

Residence, Power and torque curve, Driving force against vehicle speed Acceleration and gradability in different
gears for a typical car or truck plotted from specifications.
UNIT III RESISTANCE TO VEHICLE MOTION 10 hrs.

Calculation and plotting the curves of air, rolling and gradient resistances, driving force Engine power, speed,
rear axle ratio, Torque and mechanical efficiency at different vehicle speeds.
UNIT IV ENGINE DESIGN 10 hrs.

Pressure volume diagram, frictional mean effective pressure, engine capacity, calculation of bore and stroke
length, velocity and acceleration, gas force, inertia and resultant force at various crank angles Side thrust on cylinder
walls.
UNIT V GEAR RATIOS 10 hrs.

Determination of Gear Ratios, Acceleration and gradability - typical problems.
TEXT BOOKS:
1. Giri. N.K. Automobile Mechanics Khanna Publishers, New Delhi, 2002.
2. Heldt P.M High Speed Combustion Engine Oxford & IBH Publishing Co., Calcutta, 1989.
REFERENCES:
1. Lichty IC Engines, Kogakusha Co., Ltd. Tokyo, 1991.


MODELING AND ANALYSIS OF ENGINE L T P Credits Total Marks

SAUX 4008
COMPONENTS LAB 0 0 2 1 50
MODELING AND ANALYSIS OF THE FOLLOWING PARTS:

1. Cylinder Head. 2. Cylinder.
3. Piston. 4. Liner.
5. Piston Pin and Piston Rings. 6. Connecting Rod.
7. Crankshaft 8. Inlet and Exhaust Valves
9. Cam. 10. Cam Shaft.

SAUX 4009 COMPUTER AIDED MANUFACTURING LAB
0 0 2 1 50
SIMULATION OF MANUFACTURE OF THE FOLLOWING PARTS:

1. Cylinder Head. 2. Cylinder.
3. Piston. 4. Liner.
5. Piston Pin and Piston Rings. 6. Connecting Rod.
7. Crankshaft 8. Inlet and Exhaust Valves
9. Cam. 10. Cam Shaft.

S86XPROJ PROJECT WORK AND VIVA VOCE
0 0 30 15 100
The objective of the project work is to make use of the knowledge gained by the student at various stages of
the degree course. Students, will also be permitted to undertake industrial/consultancy project Work, outside the
department, in industries/Research labs.
There shall be three assessments during the semester by a review committee. The student shall make three
presentations on the progress made before the committee at various stages of the Project work. The Head of the
Department shall constitute the review committee for each branch of study. The total marks obtained in the three
reviews, shall be taken in to account. There will be a viva-voce examination at the end of the Project work, conducted
by one internal examiner and one external examiner. The total marks secured will be the sum of marks secured in
the Project reviews and Viva Voce Examination.
Each student is required to submit a Project report on the project assigned to him by the department. The
report should be based on the information available in the literature or data obtained by the student by way of
experiments conducted in the laboratory/industry.

AUTOMOTIVE AIR CONDITIONING L T P Credits Total Marks

SAUX 1015
(Common for all Branches) 3 0 0 3 100
UNIT I AIRCONDITIONING FUNDAMENTALS 10 hrs.

Basic air conditioning system - location of air conditioning components in a car, schematic layout of a refrigeration
system, compressor components, condenser and high pressure service ports, thermostatic expansion valve, expansion
valve calibration, controlling evaporator temperature, evaporator pressure regulator, evaporator temperature regulator.
UNIT II AIR CONDITIONER HEATING SYSTEM 10 hrs.

Automotive heaters, manually controlled air conditioner, heater system, automatically controlled air conditioner
and heater systems, automatic temperature control, air conditioning protection, engine protection.
UNIT III REFRIGERANT 10 hrs.

Containers handling refrigerants, tapping into the refrigerant container, refrigeration system diagnosis, diagnostic
procedure, ambient conditions affecting system pressures.
UNIT IV AIR ROUTING AND TEMPERATURE CONTROL 10 hrs.

Objectives, evaporator airflow through the recirculation unit, automatic temperature control, duct system, controlling
flow, vacuum reserve, testing the air control and handling systems.
UNIT V AIR CONDITIONING SERVICE 10 hrs.

Air conditioner maintenance and service, servicing heater system removing and replacing components, trouble
shooting of air controlling system, compressor service.
TEXT BOOKS:
1. William H. Crouse and Donald I. Anglin - Automotive Air conditioning McGraw Hill Inc. - 1990.
2. Boyce H.D Wiggins -Automotive Air Conditioning - Delmar 2002
REFERENCES:
1. Mitchell information Services, Inc - Mitchell Automatic Heating and Air Conditioning Systems - Prentice Hall Ind. - 1989.
2. Paul Weiser - Automotive Air Conditioning - Reston Publishing Co., Inc., - 1990.
3. MacDonald, K.I., - Automotive Air Conditioning - Theodore Audel series - 1978
4. Goings.L.F. Automotive Air Conditioning - American Technical services -1974.



SAUX 1016 ALTERNATE FUELS AND ENERGY SYSTEMS
3 0 0 3 100

Need for alternate fuel, availability and properties of alternate fuels, general use of alcohols, LPG, hydrogen,
ammonia, CNG and LNG, vegetable oils and biogas, merits and demerits of various alternate fuels, introduction to
alternate energy sources. Like EV, hybrid, fuel cell and solar cars.
UNIT II ALCOHOLS 10 hrs.

Properties as engine fuel, alcohols and gasoline blends, performance in SI engines, methanol and gasoline
blends, combustion characteristics in CI engines, emission characteristics, DME, DEE properties performance analysis,
performance in SI & CI Engines.
UNIT III NATURAL GAS, LPG, HYDROGEN AND BIOGAS 10 hrs.

Availability of CNG, properties, modification required to use in engines, performance and emission characteristics
of CNG & LPG in SI & CI engines, performance and emission of LPG. Hydrogen; storage and handling, performance
and safety aspects.
UNIT IV VEGETABLE OILS 10 hrs.

Various vegetable oils for engines, esterification, performance in engines, performance and emission
characteristics, biodiesel and its characteristics.
UNIT V ELECTRIC, HYBRID, FUEL CELL AND SOLAR CARS 10 hrs.

Layout of an electric vehicle, advantage and limitations, specifications, system components, electronic control
system, high energy and power density batteries, hybrid vehicle, fuel cell vehicles, solar powered vehicles.
TEXT BOOK
1. Richard.L.Bechfold Alternative Fuels Guide Book - SAE International Warren dale - 1997.
2. Maheswar Dayal - Energy today & tomorrow- I & B Horsier India - 1982.
REFERENCES
1. Nagpal - Power Plant Engineering - Khanna Publishers - 1991.
2. Alcohols as motor fuels progress in technology - Series No.19 SAE Publication USE - 1980.
3. SAE paper nos. 840367, 841333, 841334, 841156, Transactions, SAE, USA.

Max Mark : 80 Exam Duration : 3 hrs.

VIBRATION AND NOISE CONTROL IN L T P Credits Total Marks

SAUX 1017
AUTOMOBILES 3 0 0 3 100
UNIT I BASICS OF VIBRATION 10 hrs.

Introduction, classification of vibration: free and forced vibration, undamped and damped vibration, linear and
non linear vibration, response of damped and undamped systems under harmonic force, analysis of single degree
and two degree of freedom systems, torsion vibration, determination of natural frequencies.
UNIT II BASICS OF NOISE 10 hrs.

Introduction, amplitude, frequency, wavelength and sound pressure level, addition, subtraction and averaging
decibel levels, noise dose level, legislation, measurement and analysis of noise, measurement environment, equipment,
frequency analysis, tracking analysis, sound quality analysis.
UNIT III AUTOMOTIVE NOISE SOURCES 10 hrs.

Noise Characteristics of engines, engine overall noise levels, assessment of combustion noise, assessment of
mechanical noise, engine radiated noise, intake and exhaust noise, engine accessory contributed noise, transmission
noise, aerodynamic noise, tire noise, brake noise.
UNIT VI CONTROL TECHNIQUES 10 hrs.

Vibration isolation, tuned absorbers, untuned viscous dampers, damping treatments, application dynamic forces
generated by IC engines, engine isolation, crank shaft damping, modal analysis of the mass elastic model shock
absorbers.
UNIT V SOURCE OF NOISE AND CONTROL 10 hrs.

Methods for control of engine noise, combustion noise, mechanical noise, predictive analysis, palliative treatments
and enclosures, automotive noise control principles, sound in enclosures, sound energy absorption, sound transmission
through barriers
TEXT BOOKS:
1. Singiresu S.Rao - Mechanical Vibrations - Pearson Education, ISBN81-297-0179-0 - 2004.
2. Kewal Pujara Vibrations and Noise for Engineers, Dhanpat Rai & Sons, 1992.
REFERENCES:
1. Bernard Challen and Rodica Baranescu - Diesel Engine Reference Book - 2nd Edition - SAE International - ISBN 0-7680-0403-9
1999.
2. Julian Happian-Smith - An Introduction to Modern Vehicle Design- Butterworth-Heinemann, ISBN 0750-5044-3 - 2004



SAUX 1019 TWO AND THREE WHEELED VEHICLES
3 0 0 3 100
UNIT I POWER UNIT 10 hrs.

Two stroke SI engine, four stroke SI engine; merits and demerits. Symmetrical and unsymmetrical port timing
diagrams. Types of scavenging processes; merits and demerits, scavenging pumps. Rotary valve engine. Fuel system.
Lubrication system. Magneto coil and battery coil spark ignition system, electronic ignition system. Starting system;
Kick starter system.
UNIT II CHASSIS AND SUB-SYSTEMS 10 hrs.

Mainframe and its types. Chassis and shaft drive, Single, multiple plates and centrifugal clutches. Gear box and
gear controls. Front and rear suspension systems. Shock absorbers. Panel meters and controls on handle bar.
UNIT III BRAKES, WHEELS AND TYRES 10 hrs.

Drum brakes, disc brakes, front and rear brake links, layouts. Spoked wheel, cast wheel, disc wheel, disc types.
Tires and tubes.
UNIT IV TWO WHEELERS 10 hrs.

Case study of major Indian models of motorcycles, scooters and mopeds. TVS mopeds and motorcycles, Hero
Honda motorcycles, Bajaj scooters and motorcycles, Yamaha, Enfield motorcycles. Servicing and maintenance.
UNIT V THREE WHEELERS 10 hrs.

Case study of Indian models. Auto rickshaws, pickup van, delivery van and trailer. Maintenance: daily, weekly,
monthly, Fault tracing.
TEXT BOOK:
1. Irving.P.E. - Motor Cycle Engineering - Temple Press Book, London 1992.
REFERENCES:
1. The Cycle Motor Manual - Temple Press Limited, London - 1990
2. Encyclopedia of Motorcycling - 20 volume Marshall, Cavensih, UK - 1989
3. Brayant R.V,Vespa - Maintenance and Repair Series S.Chand & Co., New Delhi - 1986.
4. Raymond Broad Lambretta - A Practical Guide to maintenance and repair S.Chand & Co., New Delhi - 1987.



SAUX 1022 MODERN AUTOMOBILE ACCESSORIES
3 0 0 3 100
UNIT I ENGINE MANAGEMENT SYSTEMS 10 hrs.

Electronically controlled SI and CI engine fuel injection systems, related hardware and software. Closed loop
ignition system. Catalytic converters and particulate traps.
UNIT II CHASSIS 10 hrs.

Active suspension control, Pneumatic suspensions.
UNIT III HEATING AND AIR CONDITIONING 10 hrs.

Principles of vehicle air conditioning and heating.
UNIT IV COMFORT AND CONVENIENCE 10 hrs.

Adaptive cruise control, car entertainment, power windows, navigation system, adaptive noise control, electric
seats, driver information system. Power windows, power steering.
UNIT V SAFETY AND SECURITY SYSTEMS 10 hrs.

Airbags, seat belt tightening system, collapsible and tilt able steering column, Anti theft system, anti lock braking
system, electronic stability control system/traction control system, roll over protection system.
TEXT BOOKS:
1. Tom Denton - Automobile Electrical and Electronic Systems - Edward Arnold, London - 1995.
2. Eric Chowanietz - Automotive Electronics - SAE International USA - 1995.
REFERENCE:
1. Bosch Automotive Hand Book - 5th Edition - SAE Publication, USA - 2000.



SAUX 1023 FUEL CELL AND APPLICATIONS
3 0 0 3 100
UNIT I INTRODUCTION TO FUEL CELL 10 hrs.

Introduction working and types of fuel cell low, medium and high temperature fuel cell, liquid and methanol
types, proton exchange membrane fuel cell solid oxide, hydrogen fuel cells thermodynamics and electrochemical
kinetics of fuel cells.
UNIT II FUEL CELL FOR AUTOMOTIVE APPLICATIONS 10 hrs.

Fuel cell for automotive applications technology advances in fuel cell vehicle systems onboard hydrogen
storage liquid hydrogen and compressed hydrogen metal hydrides, fuel cell control system alkaline fuel cell
road map to market.
UNIT III FUEL CELL COMPONENTS AND THEIR IMPACT ON PERFORMANCE 10 hrs.
Fuel cell performance characteristics current/voltage, voltage efficiency and power density, ohmic resistance,
kinetic performance, mass transfer effects membrane electrode assembly components, fuel cell stack, bi-polar plate,
humidifiers and cooling plates.
UNIT IV FUELING 10 hrs.

Hydrogen storage technology pressure cylinders, liquid hydrogen, metal hydrides, carbon fibers reformer
technology steam reforming, partial oxidation, auto thermal reforming CO removal, fuel cell technology based on
removal like bio-mass.
UNIT V FUEL CYCLE ANALYSIS 10 hrs.

Introduction to fuel cycle analysis application to fuel cell and other competing technologies like battery powered
vehicles, SI engines fueled by natural gas and hydrogen and hybrid electric vehicle.
TEXTBOOKS
1. Fuel Cells for automotive applications professional engineering publishing UK. ISBN 1-86058 4233, 2004.
2. Gregor Hoogers, Fuel Cell Technology Handbook SAE International, CRC Press ISBN 0-8493-0877-1-2003.
Max Mark : 80 Exam Duration : 3hrs.



SAUX 1024 OFF ROAD VEHICLES
3 0 0 3 100
UNIT I CLASSIFICATION AND REQUIREMENTS OF OFF ROAD VEHICLES 10 hrs.

Construction layout, capacity and applications. Power Plants, Chassis and Transmission, Multivalve vehicles.
UNIT II EARTH MOVING MACHINES 10 hrs.

Earthmovers like dumpers, loaders - single bucket, Multi bucket and rotary types- bulldozers, excavators, backhoe
loaders, scrappers, drag and self powered types, Bush cutters, stumpers, tree dozer, rippers etc. Power and capacity
of earthmoving machines.
UNIT III SCRAPPERS, GRADERS, SHOVELS AND DITCHERS 10 hrs.

Scrappers, elevating graders, motor graders, self powered scrappers and graders, Power shovel, revolving and
stripper shovels drag lines ditchers capacity of shovels.
UNIT IV FARM EQUIPMENTS, MILITARY AND COMBAT VEHICLES 10 hrs.

Power take off, special implements. Special features and constructional details of tankers, gun carriers and
transport vehicles.
UNIT V VEHICLE SYSTEMS, FEATURES 10 hrs.

Brake system and actuation OCDB and dry disc caliper brakes. Body hoist and bucket operational hydraulics.
Hydro-pneumatic suspension cylinders. Power steering system. Kinematics for loader and bulldozer operational linkages.
Safety features, safe warning system for dumper. Design aspects on dumper body, loader bucket and water tank of
sprinkler.
TEXT BOOKS:
1. Robert L Peurifoy, Construction, planning, equipment and methods Tata McGraw Hill Publishing company Ltd.
2. Nakra C.P., Farm machines and equipments Dhanparai Publishing company Pvt. Ltd.
3. Abrosimov.K. Branberg.A and Katayer.K, Road making machinery, MIR Publishers, Moscow, 1971.
4. SAE Handbook Vol. III, SAE, USA.
5. Wong.J.T., Theory of Ground Vehicles, John Wiley & Sons, New York, 1987.
REFERENCES:
1. Off the road wheeled and combined traction devices Ash gate Publishing Co.Ltd. 1988.
2. Schulz Erich.J, Diesel equipment I & II, McGraw Hill company, London.
3. Bart H Vanderveen, Tanks and Transport vehicles, Frederic Warne and Co Ltd.,London.
4. Satyanarayana. B., Construction planning and equipment, standard publishers and distributors, New Delhi.


ADVANCED INTERNAL COMBUSTION L T P Credits Total Marks

SMEX1024
ENGINEERING 3 0 0 3 100
UNIT I 10 hrs.
Thermodynamics of Diesel Cycle Performance of 4 and 2 stroke engines use of gaseous, liquid and solid
fuels composition of petrol and diesel fuels combustion fuels principles of spark and compression ignition
theoretical and actual air / fuel ratio, importance valve and port timing.
UNIT II 10 hrs.
Octane and Cetane number determination carburetion carburettor diesel fuel pump and injection system
normal and abnormal combustion effects and prevention in diesel and petrol engines, shape of combustion chambers
in SI and CI engines air movement in CI engines charge stratification in SI engines.
UNIT III 10 hrs.

Engine cooling and lubrication systems, spark ignition system inlet and exhaust manifold arrangements ideal,
relative, mechanical and thermal efficiency, brake mean effective pressure and heat balance calculation and curves,
torque, load speed characteristics of multicylinder engines
UNIT IV 10 hrs.
Simple Component design of piston, cylinder, connecting rod, crankshaft, flywheel and main bearing Functions
of inlet and exhaust valves, cylinder heads, piston rings, cylinder liners, air filters, exhaust silencers, petrol fuel pump,
lube oil pump, cam shaft.
UNIT V 10 hrs.
Applications: Diesel engine in different fields Automobile, Agriculture, Marine, industrial power plants and rail
traction, petrol engine for automobile. Comparison of diesel, steam and gas turbines power plants. Fuel oil reserves
and saving methods alternate fuel and bifuel operation in engines free piston engines and wankel rotary engines.
REFERENCE BOOKS:
1. John Heywood Internal Combustion engines, McGraw Hill, 1988
2. Gill, Smith and Zurich Fundamentals of IC engines,
3. R B Mathur. and R.P Sharma. Internal Combustion engines, Dhanpat Rai and Sons, 1994
4. Ganesan.V Internal combustion engines, TMH 1996
5. C P Kothandaraman et al., A course in thermodynamics in heat engines Dhanpat Rai and Sons
6. P.M. Heldt, High speed combustion engines, Oxford and IBH
7. Internal Combustion engines, Maleev.V.L, McGraw Hill



SMEX1027 COMBUSTION ENGINEERING
3 0 0 3 100
UNIT I COMBUSTION OF FUELS 10 hrs.

Combustion equations, Theoretical air, excess air, air fuel ratio, equivalence ratio, exhaust gas composition,
Airfuel ratio from exhaust gas composition, heating value of fuels.
UNIT II THERMODYNAMICS OF COMBUSTION 10 hrs.

Thermo-chemistry, First law analysis of reacting systems, Adiabatic combustion temperature, Second law analysis
of reacting systems, criterion for chemical equilibrium, Equilibrium constant for gaseous mixtures, Evaluation of
equilibrium composition, chemical availability
UNIT III KINETICS OF COMBUSTION 10 hrs.

Rates of reaction, Reaction order and molecularity complex reactions, chain reactions, Arrhenius rate equation,
Collection theory, activated complex theory, Explosive and general oxidative characteristics of fuels
UNIT IV FLAMES 10 hrs.

Laminar and Turbulent flames, Premixed and Diffusion flames, Burning velocity and its determination, Factors
affecting burning velocity, Quenching, Flammability and Ignition, Flame stabilization in open burners.
UNIT V ENGINE COMBUSTION 10 hrs.

Combustion in SI and CI engines, stages of combustion in SI and CI engines, Normal combustion and Abnormal
combustion, Emissions from premixed combustion, Emission from Non-premixed combustion, Control of emissions
REFERENCE BOOKS
1. Stephen R. Turns, An Introduction to Combustion, McGraw Hill Book Company, 1996.
2. Irwin Glassman, Combustion, Third Edition, Academic Press, 1996.
3. S.P. Sharma and Chandramohan, Fuels and Combustion, Tata McGraw Hill Book Co., 1984.
4. Samir Sarkar, Fuels and Combustion, Orient Longman, 1984.
5. K.K.Kuo, Principles of Combustion, John Wiley & Sons, 1984.
6. J.B. Heywood, Internal Combustion Engine Fundamentals, Mc Graw Hill Book Co., 1988.



SAUX 1020 TRANSPORT MANAGEMENT
3 0 0 3 100

Personnel management; objectives and functions of personnel management, psychology, sociology and their
relevance to organization, personality problems. Selection process: job description, employment tests, interviewing,
introduction to training objectives, advantages, methods of training, training procedure, psychological tests.
UNIT II TRANSPORT SYSTEMS 10 hrs.

Introduction to various transport systems. Advantages of motor transport. Principal function of administrative,
traffic, secretarial and engineering divisions. chain of responsibility, forms of ownership by state, municipality, public
body and private undertakings.
UNIT III SCHEDULING AND FARE STRUCTURE 10 hrs.

Principal features of operating costs for transport vehicles with examples of estimating the costs. Fare structure
and method of drawing up of a fare table. Various types of fare collecting methods. Basic factors of bus scheduling.
Problems on bus scheduling.
UNIT IV MOTOR VEHICLE ACT 10 hrs.

Traffic signs, fitness certificate, registration requirements, permit insurance, constructional regulations, description
of vehicle-tankers, tippers, delivery vans, recovery vans, Power wagons and fire fighting vehicles. Spread over, running
time, test for competence to drive.
UNIT V MAINTENANCE 10 hrs.

Preventive maintenance system in transport industry, tire maintenance procedures. Causes for uneven tire wear;
remedies, maintenance procedure for better fuel economy, Design of bus depot layout.
TEXTBOOK:
1. John Duke - Fleet Management McGraw-Hill Co, USA -1984.
REFERENCES:
1. Government Motor Vehicle Act Eastern Book Company, Lucknow - 1989
2. Kitchin.L.D., - Bus Operation - Illiffee and Sons Co., London, III edition - 1992
3. The motor vehicle Act 1939 - Ejaz Ahemad, Ashok law house, India - 1989



SMEX1034 SOLID WASTE MANAGEMENT
3 0 0 3 100
UNIT I SOLID WASTE 10 hrs.

Definitions Sources, Types, Compositions, Properties of Solid Waste Municipal Solid Waste Physical,
Chemical and Biological Property Collection Transfer Stations Waste Minimization and Recycling of Municipal
Waste
UNIT II WASTE TREATMENT 10 hrs.

Size Reduction Aerobic Composting Incineration Furnace Type & Design, Medical/ Pharmaceutical Waste
Incineration Environmental Impacts Measures of Mitigate Environmental Effects due to Incineration
UNIT III WASTE DISPOSAL 10 hrs.

Land Fill Method of Solid Waste Disposal Land Fill Classficaition, Types, Methods &Siting Consideration
Layout & Preliminary Design of Land Fills Composition, Characteristics generation, Movement and Control of Landfill
Leachate & Gases Environmental Monitoring System for Land Fill Gases, Waste landfill Remediation
UNIT IV HAZARDOUS WASTE MANAGEMENT 10 hrs.

Definition & Identification of Hazardous Waste Sources and Nature of Hazardous Waste Impact on
Environment Hazardous Waste Control Minimization and Recycling -Assessment of Hazardous Waste Sites
Disposal of Hazardous Waste, Underground Storage Tanks Construction, Installation & Closure, Remediaiton, risk
assessment.
UNIT V ENERGY GENERATION FROM WASTE 10 hrs.

Thermal conversion Technologies Pyrolysis systems, Combustion systems, Gasification systems, Environment
control systems, energy recovery systems.
Biological & chemical conversion technologies Aerobic composting, low solids. Anaerobic digestion, high solids
anaerobic digestion, Energy production from biological conversion products, other biological transformation processes.
Chemical transformation processes.
REFERENCE BOOKS:
1. George Tchobanoglous, H.Theisen, S. Vigil, Integrated Solid Waste management- Engg. Principles and management issues McGraw
Hill, 1993.
2. Parker, Colin, & Roberts, Energy from Waste An Evaluation of Conversion Technologies, Elsevier Applied Science, London, 1985
3. Shah, L Kanti., Basics of Solid & Hazardous Waste Management Technology, Prentice Hall,
4. Manoj Datta, Waste Disposal in Engineered Landfills, Narosa Publishing House, 1997
5. Rich, Gerald et.al., Hazardous Waste Management Technology, Podvan Publishers, 1987
6. AD Bhide., BB Sundaresan, Solid Waste Management in Developing Countries, INSDOC New Delhi, 1983.
WEBSITES:
1. www.bical.net
2. www.volund.dk
3. www.iswa.org
4. www.wmrc.uiuc.edu
Max. Marks : 80 Exam Duration : 3 Hrs


SMEX1035 ENERGY ENGINEERING AND MANAGEMENT
3 0 0 3 100
UNIT I ENERGY AND ENVIRONMENT 10 hrs.

Energy Resources World energy consumption, green house effect, global warming, energy use patterns, scope
for conservation, energy prices and policies.
UNIT II ENERGY CONSERVATION 10 hrs.

Energy conservation scheme, energy surveying & auditing energy cost energy index cost cost index,
energy conservation in thermal systems, buildings, engineering & process industries, non conventional energy source
schemes.
UNIT III ENERGY TECHNOLOGIES 10 hrs.

Energy consumptions in boilers and furnaces waste heat recovery systems heat pumps and refrigerators,
storage systems heat exchangers
UNIT IV ENERGY MANAGEMENT 10 hrs.

Principles of energy management energy resource management energy management information systems
Instrumentation and measurement computerized energy management
UNIT V ECONOMICS AND FINANCE 10 hrs.

Costing and cost optimization techniques optimal target investment schedule cost appraisal and profitability
needs and cost benefits of energy resources.
REFERENCE BOOKS:
1. W.O.Paul. Callaghan, Energy Management Mc Graw Hill book company, New Delhi,1993
2. Jose Goldemberry, Thomas B Johanson, K.n Amulya. Reddy & Robert H. Williams, Energy for a sustainable world Wiley Eastern
Ltd., 1990
3. P.S RAIKHY. and PARAMINDER SINGH, Energy Consumption in India Deep and Deep Publications, 1990
4. W.R MURPHY. Energy Management Butter Worths, London, 1982
5. D A. RAY. Industrial Energy conservation Permagon Press, 1980



SMEX1040 INDUSTRIAL HANDLING AND STORAGE SYSTEMS
3 0 0 3 100
UNIT I PRINCIPLES OF MATERIAL HANDLING 10 hrs.

Importance and scope Planning, Operation and costing principles- Types systems Factors influencing their
choice Analysis of the handling systems Motion analysis, flow analysis, safety analysis and cost analysis.
UNIT II INTERPLANT MATERIAL TRANSPORTING AND HANDLING EQUIPMENT 10 hrs.

Interplant transporting facilities Trucks, rail sliding , hoists, cranes, and other material handling equipment at
receiving yard Principles of palletisation Bulk materials handling.
UNIT III INTERPLANT MATERIAL HANDLING EQUIPMENT 10 hrs.

Handling within stores Within production area Aisle design Fork lift trucks, types and applications
Automated materials handling Jib carnes OHT cranes Safety requirements.
UNIT IV CONVEYORS 10 hrs.

Conveyors, general theory and principles several types of conveyors for bulk materials and unit loads Belt
Apron, flight conveyors, bucket and swing tray conveyors Car and platform conveyors Screw Conveyors , Roller
conveyors Portable conveyors and their uses Hydraulic and Pneumatic Conveyors Overhead conveyors
Monorails safety requirements.
UNIT V STORAGE SYSTEMS 10 hrs.

Stores planning and design Storage systems and procedures incoming material control Stock location
Different types and arrangement of storage racks Order picking Loading and shipping Stores accounting and
stock verification Automated storage and retrieval systems.
REFERENCE BOOKS:
1. John R. Immer, Material Handling, McGraw Hill. 1953
2. Dougals M. Considine, Standard Handbook of Industrial Automation, Champamn & Hall, 1986
3. James Mac Gregon Apple, Plant Layout and Material Handling, John wiley, 1991.
4. James Mac Gregon Apple, Material Handling System Design, Ronald Press, 1972.
5. Rudenko N., Material Handling Equipment, Peace Publishers, 1965.
6. Aleksandr Onisinovich Spivakovskii, Converyors and Related Equipments, Peace Publishers, 1966.
7. Aggarwal G.K., Materials Handling Equipment, Tata McGraw Hill Publication, 2000



SMEX1038 COMPUTATIONAL FLUID DYNAMICS
3 0 0 3 100
UNIT I GOVERNING DIFFERENTIAL EQUATIONS 10 hrs.

Conservation of chemical species -the energy equation Momentum equation -Time -Averaged equations for
Turbulent flow Turbulence -Kinetic -Energy Equations -The General Differential Equation -Nature of
Coordinates-Independent variables-Choice of Co-ordinates-One way and Two-way Co-ordinates.
UNIT II DISCRETIZATION METHODS 10 hrs.

Nature of numerical methods Methods of Deriving the Discretization Equations Taylor Series formulation
variational formulation-Method of weighted residuals -Control volume Formulation.
UNIT III HEAT CONDUCTION, CONVECTION AND DIFFUSION 10 hrs.

Steady state one-dimensional conduction two and three dimensional conduction -Steady state one-dimensional
convection and Diffusion Discretization equations for two dimensional convection and diffusion.
UNIT IV CALCULATION OF FLOW FIELD 10 hrs.

Representation of the pressure.- Gradient term and continuity equation Staggered grid Momentum equations
-Pressure and velocity corrections Pressure. Correction equation. Introduction to Finite Element method -Solution
of Steady state heat conduction by FEM incompressible flow -Simulation by FEM.
UNIT V TURBULENCE MODELS ALGEBRAIC MODELS 10 hrs.

One equation Model Two equation models High and Low Reynolds number models Reynolds stress
models Prediction of fluid flow and heat Transfer using Standard codes.
REFERENCE BOOKS:
1. K Muralidhar, and T Sundarajan ., Computational Fluid Flow and Heat Transfer, Narosa Publishing House, New Delhi, 1995.
2. P.S Ghoshdastidar,., Computer Simulation of flow and heat transfer, Tata McGraw Hill Publishing Company Ltd., 1998.
3. F C.A.J, letcher, Computational Techniques for Fluid Dynamics 1 Fundamental and General Techniques, Springer-Verlag, 1987.
4. C.A.J., Fletches, Computational Techniques for Fluid Dynamics 2 Specific Techniques Different Flow Categories, Springer-Verlag,
1987.
5. T.K Bose., Numerical Fluid Dynamics, Narosa publishing House, 1997.
6. K Muralidhar, and Biswas Advanced Engineering Fluid Mechanics, Narosa Publishing House, New Delhi, 1996.



SMEX1039 FINITE ELEMENT ANALYSIS
3 0 0 3 100
UNIT I 1D FINITE ELEMENT ANALYSIS 10 hrs.

Historical Background Weighted Residual Methods Basic Concepts of FEM Variational Formulation of
B.V.P Ritz Method Finite Element Modeling Element Equations Linear and Quadratic Shape functions -Bar,
Beam Elements Applications to Heat Transfer.
UNIT II FEA OF 2D PROBLEMS 10 hrs.

Basic Boundary Value Problems in 2 Dimentions Triangular, quadrilateral, higher order elements Poissons
and Laplace Equations Weak Formulation Elements Matrices and Vectors Application to Solid mechanics, Heat
transfer, Fluid Mechanics.
UNIT III ISO PARAMETRIC FORMULATION 10 hrs.

Natural Co-ordinate System Lagrangian Interpolation Polynomials Iso-parametric Elements Formulation
Numerical Intergration 1D -2D Triangular elements rectangular elements Illustrative Examples.
UNIT IV SOLUTION TO PLANE ELASTICITY PROBLEMS 10 hrs.

Introduction to Theory of Elasticity Plane Stress Plane Strain and Axisymmetric Formulation Principle of
virtual work Element matrices using energy approach.
UNIT V SPECIAL TOPICS 10 hrs.

Dynamic Analysis Equation of Motion Mass Matrices Free Vibration analysis Natural frequencies of
Longitudinal Transverse and torsional vibration Introduction to transient field problems. Non linear analysis. Use
of software h & p elements special element formulation.
REFERENCE BOOKS:
1. J.N Reddy. An Introduction to the Finite Element Method , Mc Graw Hill, International Edition, 1993.
2. L.J., Segerlind Applied Finite Element Analysis, John Wiley, 1984.
3. S.S Rao., Finite Element Method in Engineering , Pergamon Press, 1989.
4. Chandrupatla & Belagundu , Finite Elements in Engineering, Prentice Hall of India Private Ltd., 1997.
5. Cook, Robert Davis et al, Concepts and Applications of Finite Element Analysis , Wiley, John & Sons,1999.
6. George R Buchanan, Schaums Outline of Finite Element Analysis, McGraw Hill Company, 1994.



SMEX1031 DESIGN OF HEAT TRANSFER EQUIPMENT
3 0 0 3 100
UNIT I 10 hrs.
Double pipe heat exchangers and heat pipes: Heat pipes structures applications basic relations
performance characteristics effects of working fluid and operating temperature, wick selection of material pore
size.
UNIT II 10 hrs.
Shell and tube Heat Exchangers: Basic components shell tube bundles baffles types and geometry, Design
procedure preliminary estimation of size, pressure drop and heat transfer calculations shell and tube sides Kern
methods Bell Delaware method.
UNIT III 10 hrs.

Compact Heat Exchangers and Gasketted plate Heat Exchangers: Compact heat exchangers types
constructional features, heat transfer and pressure drop calculation finned plate and tube. Gasketted plate
exchangers constructional features plate pack and frame operation characteristic flow arrangement heat transfer
and pressure drop calculation, performance analysis, comparison with other type of heat exchangers.
UNIT IV 10 hrs.
Condensers and Evaporators: Shell and tube condensers horizontal and vertical type design and operation
consideration, plate condensers, air cooled and direct contact types, condenser for refrigeration, evaporative condensers.
Evaporators for refrigeration and air conditioning chillers air coolers thermal analysis Shah, Kandhakar and
Ghngor & Wintertom correlations, std types
UNIT V 10 hrs.
Cooling Towers: Cooling towers-types basic relations heat balance &heat transfer characteristic, effect of
packing geometry, spray design, selection of pumps, fans, testing, maintenance, environmental effect wind loads,
typical installations.
REFERENCE BOOKS
1. Sadik Kakac & Hongtan Lin, Heat Exchangers, CRC Press, London, 1998
2. Arthur P Fraas, Heat Exchanger, Design, John Wiley & Sons, 1997
3. Kern D., Process Heat transfer,Tata MC Graw Hill, 1997
4. Walker, Industrial Heat Exhchangers, MC Graw Hill, 1997
5. Holger Martin, Heat Exchangers, Hemisphere publishing Corporation, London, 1992



SAUX 1018 AUTOMOTIVE AERODYNAMICS
3 0 0 3 100

Scope, historical developments, fundamental of fluid mechanics, flow phenomenon related to vehicles, external
and Internal flow problem, resistance to vehicle motion, performance, fuel consumption and performance potential of
vehicle aerodynamics, engine cooling requirement, air flow to passenger compartment, duct for air conditioning, cooling
of transverse engine and rear engine.
UNIT II AERODYNAMIC DRAG OF CARS 10 hrs.

Cars as a bluff body, flow field around car, drag force, types of drag force, analysis of aerodynamic drag, drag
coefficient of cars, strategies for aerodynamic development, low drag profiles.
UNIT III SHAPE OPTIMIZATION OF CARS 10 hrs.

Front end modification, front and rear wind shield angle, boat tailing, hatch back, fast back and square back,
dust flow patterns at the rear, effects of gap configuration, effect of fasteners.
UNIT IV VEHICLE HANDLING 10 hrs.

The origin of forces and moments on a vehicle, lateral stability problems, methods to calculate forces and
moments vehicle dynamics under side winds, the effects of forces and moments, characteristics of forces and
moments, dirt accumulation on the vehicle, wind noise, drag reduction in commercial vehicles.
UNIT V WIND TUNNELS FOR AUTOMOTIVE AERODYNAMICS 10 hrs.

Introduction, principle of wind tunnel technology, limitation of simulation, stress with scale models, full scale wind
tunnels, measurement techniques, equipment and transducers, road testing methods, numerical methods.
TEXT BOOK:
1. Hucho.W.H. - Aerodynamic of Road Vehicles - Butterworths Co., Ltd., - 1997.
REFERENCES:
1. Pope.A - Wind Tunnel Testing - John Wiley & Sons - 2nd Edition, New York - 1974.
2. Automotive Aerodynamic: Update SP-706 - SAE - 1987
3. Vehicle Aerodynamics - SP-1145 - SAE 1996.



SPRX 1019 INDUSTRIAL ROBOTICS AND EXPERT SYSTEMS
3 0 0 3 100
UNIT I INTRODUCTION AND ROBOTIC KINEMATICS 10 hrs.

Definition need and scope of industrial robots-Robot anatomy-work volume-Precision movement-End
effectors-sensors. Robot kinematics-Direct and inverse kinematics-Robot trajectories-Control of robot manipulators-Robot
dynamics-Methods for orientation and location of objects.
UNIT II ROBOT DRIVES AND CONTROL 10 hrs.
Controlling the robot motion-Position and velocity sensing devices-Design of drive systems-Hydraulic and
Pneumatic drives-Linear and rotary actuators and control valves-Electro hydraulic servo valves, electric drives-
Motors-designing of end effectors-Vacuum, magnetic and air operated grippers
UNIT III ROBOT SENSORS 10 hrs.
Transducers and sensors-Sensors in robot-Tactile sensor-Proximity and range sensors-Sensing joint forces-
Robotic vision system-Image Gripping-Image processing and analysis-Image segmentation-Pattern recognition-Training
of vision system
UNIT IV ROBOT CELL DESIGN AND APPLICATION 10 hrs.
Robot work cell design and control-Safety in Robotics-Robot cell layouts-Multiple robots and machine
interference-Robot cycle time analysis-Industrial applications of robots
UNIT V ROBOT PROGRAMMING, ARTIFICIAL INTELLIGENCE AND EXPERT SYSTEMS 10 hrs.
Methods of robot programming-characteristics of task level languages lead through programming methods- Motion
interpolation. Artificial intelligence-Basics-Goals of artificial Intelligence-AI techniques-problems representation in
AI-Problem reduction and solution techniques-Application of AI and KBES in robots.
Total: 50 hrs.
1. K.S.Fu, R.CGonzalez and C.S.G. Lee, Robotics control,Sensing,Vision and intelligence",McGraw Hill,1987
2. Kozyrey,Yu."Industrial Robotics",MIR Publishers Moscow,1985.
3. Richard.D.,Klafter,Thomas,A,Chmielewski,Machine Negin "Robotics Engineering-An Intergrated Approach",Prentice Hall of India Pvt.,
Ltd., 1984
4. Deb,S.R."Robotics Technology and Flexible Automation",Tata McGraw Hill,1994
5. Mikell,P.Groover,Mitchell Weis,Roger,N.Nagel,Nicholas Odrey" Industrial Robotics Technology,Programming and Applications",McGraw
Hill,Int.,1986
6. Timothy Jordonides etal,"Expert Systems and Robotics",Springer-Verlag,NewYork,,May 1991.

Max Marks: 80 Exam Duration: 3 hrs

ARTIFICIAL INTELLIGENCE AND EXPERT L T P Credits Total Marks

SMEX1041
SYSTEMS 3 0 0 3 100

Intelligence Definition, Types, Cognitive Aspect Approach; Measuring Intelligence Early Efforts, Iq And Ai;
Aspects Of Intelligence Learning, Problem Solving, Creativity, Behaviour And Biology. Artificial Intelligence; Historical
Background; Application Of Ai; Objection And Myths. AI Languages; Introduction To Prolog & Lisp.
UNIT II COGNITIVE PSYCHOLOGY 10 hrs.

The Mind Information And Cybernetics, Components For Thought; Modes Of Perception Visual, Auditory
And Other System; Memory Mechanism; Problem Solving Planning, Search, The Gps System; Types Of Learning
Rote, Parameter, Method And Concept; Game Playing Reasoning.
UNIT III KNOWLEDGE ENGINEERING 10 hrs.

Introduction; Role Of Knowledge Engineer; Knowledge Representation Psychology, Production Rules, Logic
And Programming, Common Sense And Fuzzy Logic; Semantic Network; Learning System.
UNIT IV VISUAL PERCEPTION 10 hrs.

Introduction; Biology Of Vision; Computational Aspects; Towards Artificial Vision Picture Processing Identifying
Real Objects; Vision Programmes; Factory Vision Systems, Robotics; Ai Impact; Robot Sensor; Factory Robots, Personal
Robots; Robots Tomorrow.
UNIT V EXPERT SYSTEM 10 hrs.

Introduction; Knowledge Acquisition For Expert System; Future of Expert System System Structusystem
Structure, Inference Engines, Uncertainties, Memory Mechanisms Range Of Application; Actural Aspect System VP
Expert. Assignment, Development of Simple Expert System.
REFERENCE BOOKS:
1. Rich E., Artificial Intelligence, Mcgraw Hill, 2002
2. Simons G.L., Introducing Artificial Intelligence, NCC publications, 1984
3. Charniak E. and Mc Dermott D., Introduction to Artificial Intelligence, 4th Edition, Pearson Education Inc. and Dorling Kindersley
Publishing Inc, 2009
4. Peter Jackson, Introduction to expert systems, 3rd Edition, Addison Wesley Ltd, 1999.
5. Wendy B. Ranch Hindlin, AI in business, science and Industry Applications., Vol 2., PH, 1985



SAUX 1021 AUTOMOTIVE SAFETY
3 0 0 3 100

Design of the body for safety, energy equation, engine location, deceleration of vehicle inside passenger
compartment, deceleration on impact with stationary and movable obstacle, concept of crumble zone, safety sandwich
construction.
UNIT II SAFETY CONCEPTS 10 hrs.

Active safety: driving safety, conditional safety, perceptibility safety, operating safety- passive safety: exterior
safety, interior safety, deformation behavior of vehicle body, speed and acceleration characteristics of passenger
compartment on impact.
UNIT III SAFETY EQUIPMENTS 10 hrs.

Seat belt, regulations, automatic seat belt lightener system, collapsible steering column, tilt able steering wheel,
air bags, electronic system for activating air bags, bumper design for safety.
UNIT IV COLLISION WARNING AND AVOIDANCE 10 hrs.

Collision warning system, causes of rear end collision, frontal object detection, rear vehicle object detection
system, object detection system with braking system interactions.
UNIT V COMFORT AND CONVENIENCE SYSTEM 10 hrs.

Steering and mirror adjustment, central locking system, Garage door opening system, tire pressure control system,
rain sensor system, environment information system
TEXT BOOK:
1. Bosch - Automotive Handbook - 5th edition - SAE publication - 2000.
REFERENCES:
1. Powloski.J - Vehicle Body Engineering - Business books limited, London - 1969.
2. Ronald.K.Jurgen - Automotive Electronics Handbook - Second edition- McGraw-Hill Inc., - 1999.

Max Mark: 80 Exam Duration: 3hrs


SMEX1030 BIO-ENERGY CONVERSION TECHNOLOGIES
3 0 0 3 100
UNIT I BIOMASS CHARACTERISTICS & PREPARATION 10 hrs.

Biomass sources and classification. Chemical composition and properties of biomass. Energy plantations .
Preparation of biomass. Size reduction, Briquetting of loose biomass, Drying, Storage and handling of biomass.
UNIT II BIOGAS TECHNOLOGY 10 hrs.

Feedstock for producing biogas, Aqueous wastes containing biodegradable organic matter, animal residues-sugar
rich materials. Microbial and biochemical aspects and operating parameters for biogas production. Kinetics and
mechanism. Dry and wet fermentation. Digesters for rural application-High rate digesters for industrial waste water
treatment.
UNIT III PYROLYSIS AND THERMO CHEMICAL CONVERSION 10 hrs.

Thermo chemical conversion of lignocelluloses biomass. Incineration for safe disposal of hazardous waste.
Biomass processing for liquid fuel production. Pyrolysis of biomass-pyrolysis regime. Effect of particle size, temperature,
and products obtained.
UNIT IV GASIFICATION OF BIOMASS 10 hrs.

Thermo chemical Principles: Effect of pressure, temperature and introducing, steam and oxygen. Design and
operation of fixed and fluidized bed Gasifiers,partial Gasification of Bio-mass By circulating fluidized bed, Safety
aspects,Partial gasification of biomass by CFB.
UNIT V COMBUSTION OF BIOMASS AND COGENERATIONS SYSTEMS; 10 hrs.

Combustion of woody biomass-theory calculations and design of equipment. Cogeneration in biomass processing
industries. Case studies: Combustion of rice husk. Use of bagasse for cogeneration.
REFERENCE BOOKS:
1. A.Chakravarthy Biotechnology and Alternative Technologies for Utilisation of Biomass or Agricultural Wastes, Oxford & IBH
publishing Co, 1989.
2. K.M. Mital Biogas Systems: Principles and Applications, ISBN 81-224-0947-4, New Age International publishers (P) Ltd., 1996.
3. P Venkata Ramana and S.N Srinivas,- Biomass Energy Systems,ISBN 81-85419-25-6, Tata Energy Research Institute, 1996.
4. D.L Klass and G.M Emert, Fuels from Biomass and Wastes, Ann Arbor Since Publ. Inc. Michigan, 1985.
5. K.C Khandelwal..and Mahdi(SS), Bio-Gas Tecnology, Tata McGraw-Hill Pub. Co.Ltd , 1986.
6. O.P.Chawls , Advances in Bio-gas Technology I.C.A.R., New Delhi, 1970.


Auto

Uploaded by

Copyright:

Available Formats

Auto

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Auto

Uploaded by

Copyright:

Available Formats

SATHYABAMA UNIVERSITY

(Established under section 3 of UGC Act, 1956)

3. Requirements for Completion of a Semester

(i) Theory Courses

B.E. (AUTOMOBILE ENGINEERING) i REGULATIONS 2010

RANGE OF MARKS FOR GRADES

CUMULATIVE GRADE POINT AVERAGE CALCULATION

where Ci - Credits for the subject

GP i - Grade Point for the subject

i - Sum of all subjects successfully cleared during all the semesters

8. Classification of the Degree Awarded

B.E. (AUTOMOBILE ENGINEERING) ii REGULATIONS 2010

CGPA 9.0 - First Class - Exemplary

CGPA 7.50 < 9.0 - First Class with Distinction

CGPA 6.00 < 7.50 - First Class

CGPA 5.00 < 6.00 - Second Class

Minimum CGPA requirements for award of Degree is 5.0 CGPA.

10. Revision of Regulations and Curriculum

B.E. (AUTOMOBILE ENGINEERING) iii REGULATIONS 2010

B.E. - AUTOMOBILE ENGINEERING

2 SCHX1001 Environmental Science and Engineering 3 0 0 3 2

3 SPHX1001 Physics of Materials 3 0 0 3 3

4 SCYX1001 Engineering Chemistry 3 0 0 3 4

6 SMEX1001 Engineering Graphics 1 2 0 3 6

7 SMEX1002 Engineering Mechanics 2 1 0 3 7

2 SCSX4002 Programming In C Lab 0 0 4 2 8

Sl. No. SUBJECT CODE SUBJECT TITLE L T P C Page No.

1 SHSX1001 English for Science and Technology 3 0 0 3 9

2 SMTX1002 Engineering Mathematics II 3 1 0 4 10

3 SPHX1002 Applied Physics 3 0 0 3 11

4 SCYX1003 Chemistry of Industrial Materials 3 0 0 3 12

5 SCSX1003 Programming in C++ 3 0 0 3 13

6 SEEX1002 Basic Electrical and Electronics Engineering 3 0 0 3 14

7 SPRX1001 Basic Mechanical and Civil Engineering 3 0 0 3 15

1 SPRX4001 Mechanical Workshop Lab 0 0 4 2 16

2 SCSX4007 Programming in C++ Lab 0 0 4 2 16

B.E. (AUTOMOBILE ENGINEERING) iv REGULATIONS 2010

Sl. No. SUBJECT CODE SUBJECT TITLE L T P C Page No.

1 SMTX 1009 Engineering Mathematics III 3 1 0 4 17

2 SMEX 1003 Kinematics of Machines 2 1 0 3 18

3 SMEX 1004 Engineering Thermodynamics 2 1 0 3 19

4 SMEX 1005 Fluid Mechanics and Machinery 2 1 0 3 20

5 SMEX 1006 Machine Drawing 1 2 0 3 21

6 SAUX 1001 Automotive Petrol Engines 3 0 0 3 22

7 SAUX 1002 Fuels and Lubricants 3 0 0 3 23

1 SMEX 4006 Fluid Mechanics and Machinery Lab 0 0 4 2 24

2 SAUX 4001 Fuels and Lubricants and Engine Testing 0 0 4 2 25

Sl. No. SUBJECT CODE SUBJECT TITLE L T P C Page No.

1 SMTX 1010 Engineering Mathematics IV 3 1 0 4 26

2 SMEX 1008 Dynamics of Machinery 3 1 0 4 27

3 SMEX 1009 Thermal Engineering 3 1 0 4 28

4 SMEX 1010 Strength of Materials 2 1 0 3 29

5 SECX 1011 Microprocessor and Microcontroller 3 0 0 3 30

6 SAUX 1003 Automotive Diesel Engines 3 0 0 3 31

1 SMEX 4008 Material Testing Lab 0 0 4 2 32

2 SECX 4014 Electronics and Microprocessor Lab 0 0 4 2 32

B.E. (AUTOMOBILE ENGINEERING) v REGULATIONS 2010

Sl. No. SUBJECT CODE SUBJECT TITLE L T P C Page No.

1 SMTX 1011 Applied Numerical Methods 3 1 0 4 33