Windows Server Support Interview Questions and Answers

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 27

Windows Server Support Interview Questions and Answers (L2)

What is the difference between Authorized DHCP and Non Authorized DHCP?
To avoid problems in the network causing by mis-configured DHCP servers, server in
windows 2000 must be validate by AD before starting service to clients. If an authorized
DHCP finds any DHCP server in the network it stop serving the clients

Difference between inter-site and intra-site replication. Protocols using for


replication.
Intra-site replication can be done between the domain controllers in the same site. Inter-
site replication can be done between two different sites over WAN links
BHS (Bridge Head Servers) is responsible for initiating replication between the sites. Inter-
site replication can be done B/w BHS in one site and BHS in another site.
We can use RPC over IP or SMTP as a replication protocols where as Domain partition is
not possible to replicate using SMTP

How to monitor replication


We can user Replmon tool from support tools

Brief explanation of RAID Levels


Microsoft Windows XP, Windows 2000 and Windows Server 2003 offer two types of disk
storage: basic and dynamic.

Basic Disk Storage


Basic storage uses normal partition tables supported by MS-DOS, Microsoft Windows 95,
Microsoft Windows 98, Microsoft Windows Millennium Edition (Me), Microsoft Windows
NT, Microsoft Windows 2000, Windows Server 2003 and Windows XP. A disk initialized for
basic storage is called a basic disk. A basic disk contains basic volumes, such as primary
partitions, extended partitions, and logical drives. Additionally, basic volumes include
multidisk volumes that are created by using Windows NT 4.0 or earlier, such as volume
sets, stripe sets, mirror sets, and stripe sets with parity. Windows XP does not support
these multidisk basic volumes. Any volume sets, stripe sets, mirror sets, or stripe sets with
parity must be backed up and deleted or converted to dynamic disks before you install
Windows XP Professional.

Dynamic Disk Storage


Dynamic storage is supported in Windows XP Professional, Windows 2000 and Windows
Server 2003. A disk initialized for dynamic storage is called a dynamic disk. A dynamic disk
contains dynamic volumes, such as simple volumes, spanned volumes, striped volumes,
mirrored volumes, and RAID-5 volumes. With dynamic storage, you can perform disk and
volume management without the need to restart Windows.

Note: Dynamic disks are not supported on portable computers or on Windows XP Home
Edition-based computers.
You cannot create mirrored volumes or RAID-5 volumes on Windows XP Home Edition,
Windows XP Professional, or Windows XP 64-Bit Edition-based computers. However, you
can use a Windows XP Professional-based computer to create a mirrored or RAID-5 volume
on remote computers that are running Windows 2000 Server, Windows 2000 Advanced
Server, or Windows 2000 Datacenter Server, or the Standard, Enterprise and Data Center
versions of Windows Server 2003.

Storage types are separate from the file system type. A basic or dynamic disk can contain
any combination of FAT16, FAT32, or NTFS partitions or volumes.

A disk system can contain any combination of storage types. However, all volumes on the
same disk must use the same storage type.

To convert a Basic Disk to a Dynamic Disk:

Use the Disk Management snap-in in Windows XP/2000/2003 to convert a basic disk to a
dynamic disk. To do this, follow these steps:
1. Log on as Administrator or as a member of the Administrators group.
2. Click Start, and then click Control Panel.
3. Click Performance and Maintenance, click Administrative Tools, and then double-click
Computer Management. You can also right-click My Computer and choose Manage if you
have My Computer displayed on your desktop.
4. In the left pane, click Disk Management.
5. In the lower-right pane, right-click the basic disk that you want to convert, and then click
Convert to Dynamic Disk. You must right-click the gray area that contains the disk title on
the left side of the Details pane.
6. Select the check box that is next to the disk that you want to convert (if it is not already
selected), and then click OK.
7. Click Details if you want to view the list of volumes in the disk. Click Convert.
8. Click Yes when you are prompted to convert the disk, and then click OK.

Warning: After you convert a basic disk to a dynamic disk, local access to the dynamic disk
is limited to Windows XP Professional, Windows 2000 and Windows Server 2003.
Additionally, after you convert a basic disk to a dynamic disk, the dynamic volumes cannot
be changed back to partitions. You must first delete all dynamic volumes on the disk and
then convert the dynamic disk back to a basic disk. If you want to keep your data, you must
first back up the data or move it to another volume.

Dynamic Storage Terms


A volume is a storage unit made from free space on one or more disks. It can be formatted
with a file system and assigned a drive letter. Volumes on dynamic disks can have any of
the following layouts: simple, spanned, mirrored, striped, or RAID-5.
A simple volume uses free space from a single disk. It can be a single region on a disk or
consist of multiple, concatenated regions. A simple volume can be extended within the
same disk or onto additional disks. If a simple volume is extended across multiple disks, it
becomes a spanned volume.
A spanned volume is created from free disk space that is linked together from multiple
disks. You can extend a spanned volume onto a maximum of 32 disks. A spanned volume
cannot be mirrored and is not fault-tolerant.
A striped volume is a volume whose data is interleaved across two or more physical disks.
The data on this type of volume is allocated alternately and evenly to each of the physical
disks. A striped volume cannot be mirrored or extended and is not fault-tolerant. Striping is
also known as RAID-0.
A mirrored volume is a fault-tolerant volume whose data is duplicated on two physical
disks. All of the data on one volume is copied to another disk to provide data redundancy. If
one of the disks fails, the data can still be accessed from the remaining disk. A mirrored
volume cannot be extended. Mirroring is also known as RAID-1.
A RAID-5 volume is a fault-tolerant volume whose data is striped across an array of three
or more disks. Parity (a calculated value that can be used to reconstruct data after a failure)
is also striped across the disk array. If a physical disk fails, the portion of the RAID-5
volume that was on that failed disk can be re-created from the remaining data and the
parity. A RAID-5 volume cannot be mirrored or extended.
The system volume contains the hardware-specific files that are needed to load Windows
(for example, Ntldr, Boot.ini, and Ntdetect.com). The system volume can be, but does not
have to be, the same as the boot volume.
The boot volume contains the Windows operating system files that are located in the
%Systemroot% and %Systemroot%\System32 folders. The boot volume can be, but does
not have to be, the same as the system volume.

RAID 0 – Striping

RAID 1- Mirroring (minimum 2 HDD required)

RAID 5 – Striping With Parity (Minimum 3 HDD required)

RAID levels 1 and 5 only gives redundancy

What are the different backup strategies are available

Normal Backup
Incremental Backup
Differential Backup
Daily Backup
Copy Backup

What is a global catalog


Global catalog is a role, which maintains Indexes about objects. It contains full information
of the objects in its own domain and partial information of the objects in other domains.
Universal Group membership information will be stored in global catalog servers and
replicate to all GC’s in the forest.

What is Active Directory and what is the use of it


Active directory is a directory service, which maintains the relation ship between resources
and enabling them to work together. Because of AD hierarchal structure windows 2000 is
more scalable, reliable. Active directory is derived from X.500 standards where information
is stored is hierarchal tree like structure. Active directory depends on two Internet
standards one is DNS and other is LDAP. Information in Active directory can be queried by
using LDAP protocol

What is the physical and logical structure of AD?


Active directory physical structure is a hierarchal structure which fallows Forests—Trees
—Domains—Child Domains—Grand Child—etc

Active directory is logically divided into 3 partitions

1.Configuration partition 2. Schema Partition 3. Domain partition 4. Application Partition


(only in windows 2003 not available in windows 2000)

Out of these Configuration, Schema partitions can be replicated between the domain
controllers in the in the entire forest. Where as Domain partition can be replicated between
the domain controllers in the same domain

What is the process of user authentication (Kerberos V5) in windows 2000?


After giving logon credentials an encryption key will be generated which is used to encrypt
the time stamp of the client machine. User name and encrypted timestamp information will
be provided to domain controller for authentication. Then Domain controller based on the
password information stored in AD for that user it decrypts the encrypted time stamp
information. If produces time stamp matches to its time stamp. It will provide logon session
key and Ticket granting ticket to client in an encryption format. Again client decrypts and if
produced time stamp information is matching then it will use logon session key to logon to
the domain. Ticket granting ticket will be used to generate service granting ticket when
accessing network resources

What are the port numbers for Kerberos, LDAP and Global Catalog?

Kerberos – 88, LDAP – 389, Global Catalog – 3268

What is the use of LDAP (X.500 standard?)

LDAP is a directory access protocol, which is used to exchange directory information from
server to clients or from server to servers

What are the problems that are generally come across DHCP?
Scope is full with IP addresses no IP’s available for new machines
If scope options are not configured properly eg default gateway
Incorrect creation of scopes etc

What is the role responsible for time synchronization?


PDC Emulator is responsible for time synchronization. Time synchronization is important
because Kerberos authentication depends on time stamp information
What is TTL & how to set TTL time in DNS?
TTL is Time to Live setting used for the amount of time that the record should remain in
cache when name resolution happened.

We can set TTL in SOA (start of authority record) of DNS

How to take DNS and WINS, DHCP backup


%System root%/system32/dns
%System root%/system32/WINS
%System root%/system32/DHCP

What is recovery console


Recovery console is a utility used to recover the system when it is not booting properly or
not at all booting. We can perform fallowing operations from recovery console

We can copy, rename, or replace operating system files and folders


Enable or disable service or device startup the next time that start computer
Repair the file system boot sector or the Master Boot Record
Create and format partitions on drives

What is DFS & its usage

DFS is a distributed file system used to provide common environment for users to access
files and folders even when they are shared in different servers physically.
There are two types of DFS domain DFS and Stand alone DFS. We cannot provide
redundancy for stand alone DFS in case of failure. Domain DFS is used in a domain
environment which can be accessed by /domain name/root1 (root 1 is DFS root name).
Stand alone DFS can be used in workgroup environment which can be accessed through
/server name/root1 (root 1 is DFS root name). Both the cases we need to create DFS root
( Which appears like a shared folder for end users) and DFS links ( A logical link which is
pointing to the server where the folder is physically shared)

The maximum number of Dfs roots per server is 1.


The maximum numbers of Dfs root replicas are 31.
The maximum number of Dfs roots per domain is unlimited.
The maximum number of Dfs links or shared folders in a Dfs root is 1,000

What is RIS and what are its requirements


RIS is a remote installation service, which is used to install operation system remotely.

Client requirements
PXE DHCP-based boot ROM version 1.00 or later NIC, or a network adapter that is
supported by the RIS boot disk.
Should meet minimum operating system requirements
Software Requirements
Below network services must be active on RIS server or any server in the network
Domain Name System (DNS Service)
Dynamic Host Configuration Protocol (DHCP)
Active directory “Directory” service

How many root replicas can be created in DFS?


31

What is the difference between Domain DFS and Standalone DFS?


Refer question 17.

High Level

Can we establish trust relationship between two forests?

In Windows 2000 it is not possible. In Windows 2003 it is possible

What is FSMO Roles

Flexible single master operation (FSMO) roles are


Domain Naming Master
Schema Master
PDC Emulator
Infrastructure Master
RID Master

Brief all the FSMO Roles


Windows 2000/2003 Multi-Master Model

A multi-master enabled database, such as the Active Directory, provides the flexibility of
allowing changes to occur at any DC in the enterprise, but it also introduces the possibility
of conflicts that can potentially lead to problems once the data is replicated to the rest of
the enterprise. One way Windows 2000/2003 deals with conflicting updates is by having a
conflict resolution algorithm handle discrepancies in values by resolving to the DC to which
changes were written last (that is, "the last writer wins"), while discarding the changes in
all other DCs. Although this resolution method may be acceptable in some cases, there are
times when conflicts are just too difficult to resolve using the "last writer wins" approach.
In such cases, it is best to prevent the conflict from occurring rather than to try to resolve it
after the fact.
For certain types of changes, Windows 2000/2003 incorporates methods to prevent
conflicting Active Directory updates from occurring.
Windows 2000/2003 Single-Master Model
To prevent conflicting updates in Windows 2000/2003, the Active Directory performs
updates to certain objects in a single-master fashion.

In a single-master model, only one DC in the entire directory is allowed to process updates.
This is similar to the role given to a primary domain controller (PDC) in earlier versions of
Windows (such as Microsoft Windows NT 4.0), in which the PDC is responsible for
processing all updates in a given domain.

In a forest, there are five FSMO roles that are assigned to one or more domain controllers.
The five FSMO roles are:

Schema Master:

The schema master domain controller controls all updates and modifications to the
schema. Once the Schema update is complete, it is replicated from the schema master to all
other DCs in the directory. To update the schema of a forest, you must have access to the
schema master. There can be only one schema master in the whole forest.
Domain naming master:

The domain naming master domain controller controls the addition or removal of domains
in the forest. This DC is the only one that can add or remove a domain from the directory. It
can also add or remove cross references to domains in external directories. There can be
only one domain naming master in the whole forest.

Infrastructure Master:

When an object in one domain is referenced by another object in another domain, it


represents the reference by the GUID, the SID (for references to security principals), and
the DN of the object being referenced. The infrastructure FSMO role holder is the DC
responsible for updating an object's SID and distinguished name in a cross-domain object
reference. At any one time, there can be only one domain controller acting as the
infrastructure master in each domain.

Note: The Infrastructure Master (IM) role should be held by a domain controller that is not
a Global Catalog server (GC). If the Infrastructure Master runs on a Global Catalog server it
will stop updating object information because it does not contain any references to objects
that it does not hold. This is because a Global Catalog server holds a partial replica of every
object in the forest. As a result, cross-domain object references in that domain will not be
updated and a warning to that effect will be logged on that DC's event log. If all the domain
controllers in a domain also host the global catalog, all the domain controllers have the
current data, and it is not important which domain controller holds the infrastructure
master role.

Relative ID (RID) Master:

The RID master is responsible for processing RID pool requests from all domain controllers
in a particular domain. When a DC creates a security principal object such as a user or
group, it attaches a unique Security ID (SID) to the object. This SID consists of a domain SID
(the same for all SIDs created in a domain), and a relative ID (RID) that is unique for each
security principal SID created in a domain. Each DC in a domain is allocated a pool of RIDs
that it is allowed to assign to the security principals it creates. When a DC's allocated RID
pool falls below a threshold, that DC issues a request for additional RIDs to the domain's
RID master. The domain RID master responds to the request by retrieving RIDs from the
domain's unallocated RID pool and assigns them to the pool of the requesting DC. At any
one time, there can be only one domain controller acting as the RID master in the domain.

PDC Emulator:

The PDC emulator is necessary to synchronize time in an enterprise. Windows 2000/2003


includes the W32Time (Windows Time) time service that is required by the Kerberos
authentication protocol. All Windows 2000/2003-based computers within an enterprise
use a common time. The purpose of the time service is to ensure that the Windows Time
service uses a hierarchical relationship that controls authority and does not permit loops to
ensure appropriate common time usage.

The PDC emulator of a domain is authoritative for the domain. The PDC emulator at the
root of the forest becomes authoritative for the enterprise, and should be configured to
gather the time from an external source. All PDC FSMO role holders follow the hierarchy of
domains in the selection of their in-bound time partner.
In a Windows 2000/2003 domain, the PDC emulator role holder retains the following
functions:
Password changes performed by other DCs in the domain are replicated preferentially to
the PDC emulator.
Authentication failures that occur at a given DC in a domain because of an incorrect
password are forwarded to the PDC emulator before a bad password failure message is
reported to the user.

Account lockout is processed on the PDC emulator.

Editing or creation of Group Policy Objects (GPO) is always done from the GPO copy found
in the PDC Emulator's SYSVOL share, unless configured not to do so by the administrator.

The PDC emulator performs all of the functionality that a Microsoft Windows NT 4.0
Server-based PDC or earlier PDC performs for Windows NT 4.0-based or earlier clients.

This part of the PDC emulator role becomes unnecessary when all workstations, member
servers, and domain controllers that are running Windows NT 4.0 or earlier are all
upgraded to Windows 2000/2003. The PDC emulator still performs the other functions as
described in a Windows 2000/2003 environment.

At any one time, there can be only one domain controller acting as the PDC emulator
master in each domain in the forest.

How to manually configure FSMO Roles to separate DC’s

How can I determine who are the current FSMO Roles holders in my domain/forest?
Windows 2000/2003 Active Directory domains utilize a Single Operation Master method
called FSMO (Flexible Single Master Operation), as described in Understanding FSMO Roles
in Active Directory.

The five FSMO roles are:

• Schema master - Forest-wide and one per forest.

• Domain naming master - Forest-wide and one per forest.

• RID master - Domain-specific and one for each domain.

• PDC - PDC Emulator is domain-specific and one for each domain.

• Infrastructure master - Domain-specific and one for each domain.

In most cases an administrator can keep the FSMO role holders (all 5 of them) in the same
spot (or actually, on the same DC) as has been configured by the Active Directory
installation process. However, there are scenarios where an administrator would want to
move one or more of the FSMO roles from the default holder DC to a different DC. The
transferring method is described in the Transferring FSMO Roles article, while seizing the
roles from a non-operational DC to a different DC is described in the Seizing FSMO Roles
article.

In order to better understand your AD infrastructure and to know the added value that
each DC might possess, an AD administrator must have the exact knowledge of which one
of the existing DCs is holding a FSMO role, and what role it holds. With that knowledge in
hand, the administrator can make better arrangements in case of a scheduled shut-down of
any given DC, and better prepare him or herself in case of a non-scheduled cease of
operation from one of the DCs.

How to find out which DC is holding which FSMO role? Well, one can accomplish this task
by many means. This article will list a few of the available methods.

Method #1: Know the default settings

The FSMO roles were assigned to one or more DCs during the DCPROMO process. The
following table summarizes the FSMO default locations:

FSMO Role Number of DCs holding this role Original DC holding the FSMO role
Schema One per forest The first DC in the first domain in the forest (i.e. the Forest Root
Domain)
Domain Naming One per forest
RID One per domain The first DC in a domain (any domain, including the Forest Root
Domain, any Tree Root Domain, or any Child Domain)
PDC Emulator One per domain
Infrastructure One per domain

Method #2: Use the GUI

The FSMO role holders can be easily found by use of some of the AD snap-ins. Use this table
to see which tool can be used for what FSMO role:

FSMO Role Which snap-in should I use?


Schema Schema snap-in
Domain Naming AD Domains and Trusts snap-in
RID AD Users and Computers snap-in
PDC Emulator
Infrastructure

Finding the RID Master, PDC Emulator, and Infrastructure Masters via GUI

To find out who currently holds the Domain-Specific RID Master, PDC Emulator, and
Infrastructure Master FSMO Roles:

1. Open the Active Directory Users and Computers snap-in from the Administrative Tools
folder.
2. Right-click the Active Directory Users and Computers icon again and press Operation
Masters.
3. Select the appropriate tab for the role you wish to view.
4. When you're done click close.

Finding the Domain Naming Master via GUI

To find out who currently holds the Domain Naming Master Role:
1. Open the Active Directory Domains and Trusts snap-in from the Administrative Tools
folder.
2. Right-click the Active Directory Domains and Trusts icon again and press Operation
Masters.
3. When you're done click close.

Finding the Schema Master via GUI

To find out who currently holds the Schema Master Role:


1. Register the Schmmgmt.dll library by pressing Start > RUN and typing:
2. Press OK. You should receive a success confirmation.
3. From the Run command open an MMC Console by typing MMC.
4. On the Console menu, press Add/Remove Snap-in.
5. Press Add. Select Active Directory Schema.
6. Press Add and press Close. Press OK.
7. Click the Active Directory Schema icon. After it loads right-click it and press Operation
Masters.
8. Press the Close button.

Method #3: Use the Ntdsutil command

The FSMO role holders can be easily found by use of the Ntdsutil command.

Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of
Active Directory functionality.
1. On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then
click OK.
2. Type roles, and then press ENTER.

Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?,
and then press ENTER.
3. Type connections, and then press ENTER.
4. Type connect to server , where is the name of the server you want to use, and then press
ENTER.
5. At the server connections: prompt, type q, and then press ENTER again.
6. At the FSMO maintenance: prompt, type Select operation target, and then press ENTER
again.

At the select operation target: prompt, type List roles for connected server, and then press
ENTER again.

select operation target: List roles for connected server

Server "server100" knows about 5 roles

Schema - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-


Name,CN=Sites,CN=C

onfiguration,DC=dpetri,DC=net

Domain - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-


Name,CN=Sites,CN=C

onfiguration,DC=dpetri,DC=net

PDC - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-


Name,CN=Sites,CN=Conf

iguration,DC=dpetri,DC=net

RID - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-


Name,CN=Sites,CN=Conf
iguration,DC=dpetri,DC=net

Infrastructure - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-


Name,CN=Si

tes,CN=Configuration,DC=dpetri,DC=net

select operation target:

8. Type q 3 times to exit the Ntdsutil prompt.

Note: You can download THIS nice batch file that will do all this for you (1kb).

Another Note: Microsoft has a nice tool called Dumpfsmos.cmd, found in the Windows 2000
Resource Kit (and can be downloaded here: Download Free Windows 2000 Resource Kit
Tools). This tool is basically a one-click Ntdsutil script that performs the same operation
described above.

Method #4: Use the Netdom command

The FSMO role holders can be easily found by use of the Netdom command.

Netdom.exe is a part of the Windows 2000/XP/2003 Support Tools. You must either
download it separately (from here Download Free Windows 2000 Resource Kit Tools) or
by obtaining the correct Support Tools pack for your operating system. The Support Tools
pack can be found in the \Support\Tools folder on your installation CD (or you can
Download Windows 2000 SP4 Support Tools, Download Windows XP SP1 Deploy Tools).

1. On any domain controller, click Start, click Run, type CMD in the Open box, and then click
OK.
2. In the Command Prompt window, type netdom query /domain: fsmo (where is the name
of YOUR domain).

Close the CMD window.

Note: You can download THIS nice batch file that will do all this for you (1kb).

Method #5: Use the Replmon tool

The FSMO role holders can be easily found by use of the Netdom command.

Just like Netdom, Replmon.exe is a part of the Windows 2000/XP/2003 Support Tools.
Replmon can be used for a wide verity of tasks, mostly with those that are related with AD
replication. But Replmon can also provide valuable information about the AD, about any
DC, and also about other objects and settings, such as GPOs and FSMO roles. Install the
package before attempting to use the tool.

1. On any domain controller, click Start, click Run, type REPLMON in the Open box, and then
click OK.
2. Right-click Monitored servers and select Add Monitored Server.
3. In the Add Server to Monitor window, select the Search the Directory for the server to
add. Make sure your AD domain name is listed in the drop-down list.
4. In the site list select your site, expand it, and click to select the server you want to query.
Click Finish.
5. Right-click the server that is now listed in the left-pane, and select Properties.
6. Click on the FSMO Roles tab and read the results.
7. Click Ok when you're done.

How can I forcibly transfer (seize) some or all of the FSMO Roles from one DC to
another?

Windows 2000/2003 Active Directory domains utilize a Single Operation Master method
called FSMO (Flexible Single Master Operation), as described in Understanding FSMO Roles
in Active Directory.

The five FSMO roles are:

• Schema master - Forest-wide and one per forest.


• Domain naming master - Forest-wide and one per forest.
• RID master - Domain-specific and one for each domain.
• PDC - PDC Emulator is domain-specific and one for each domain.
• Infrastructure master - Domain-specific and one for each domain.

In most cases an administrator can keep the FSMO role holders (all 5 of them) in the same
spot (or actually, on the same DC) as has been configured by the Active Directory
installation process. However, there are scenarios where an administrator would want to
move one or more of the FSMO roles from the default holder DC to a different DC.

Moving the FSMO roles while both the original FSMO role holder and the future FSMO role
holder are online and operational is called Transferring, and is described in the
Transferring FSMO Roles article.

However, when the original FSMO role holder went offline or became non operational for a
long period of time, the administrator might consider moving the FSMO role from the
original, non-operational holder, to a different DC. The process of moving the FSMO role
from a non-operational role holder to a different DC is called Seizing, and is described in
this article.

If a DC holding a FSMO role fails, the best thing to do is to try and get the server online
again. Since none of the FSMO roles are immediately critical (well, almost none, the loss of
the PDC Emulator FSMO role might become a problem unless you fix it in a reasonable
amount of time), so it is not a problem to them to be unavailable for hours or even days.

If a DC becomes unreliable, try to get it back on line, and transfer the FSMO roles to a
reliable computer. Administrators should use extreme caution in seizing FSMO roles. This
operation, in most cases, should be performed only if the original FSMO role owner will not
be brought back into the environment. Only seize a FSMO role if absolutely necessary when
the original role holder is not connected to the network.

What will happen if you do not perform the seize in time? This table has the info:

FSMO Role Loss implications

Schema The schema cannot be extended. However, in the short term no one will notice a
missing Schema Master unless you plan a schema upgrade during that time.

Domain Naming Unless you are going to run DCPROMO, then you will not miss this FSMO
role.

RID Chances are good that the existing DCs will have enough unused RIDs to last some
time, unless you're building hundreds of users or computer object per week.

PDC Emulator Will be missed soon. NT 4.0 BDCs will not be able to replicate, there will be
no time synchronization in the domain, you will probably not be able to change or
troubleshoot group policies and password changes will become a problem.

Infrastructure Group memberships may be incomplete. If you only have one domain, then
there will be no impact.

Important: If the RID, Schema, or Domain Naming FSMOs are seized, then the original
domain controller must not be activated in the forest again. It is necessary to reinstall
Windows if these servers are to be used again.

The following table summarizes the FSMO seizing restrictions:


FSMO Role Restrictions
Schema Original must be reinstalled
Domain Naming
RID
PDC Emulator Can transfer back to original
Infrastructure

Another consideration before performing the seize operation is the administrator's group
membership, as this table lists:
FSMO Role Administrator must be a member of
Schema Schema Admins
Domain Naming Enterprise Admins
RID Domain Admins
PDC Emulator
Infrastructure

To seize the FSMO roles by using Ntdsutil, follow these steps:

Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of
Active Directory functionality.

1. On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then
click OK.
2. Type roles, and then press ENTER.

Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?,
and then press ENTER.

3. Type connections, and then press ENTER.


4. Type connect to server , where is the name of the server you want to use, and then press
ENTER.
5. At the server connections: prompt, type q, and then press ENTER again.
6. Type seize , where is the role you want to seize. For example, to seize the RID Master
role, you would type seize rid master:

Options are:

7. You will receive a warning window asking if you want to perform the seize. Click on Yes.
fsmo maintenance: Seize infrastructure master
Attempting safe transfer of infrastructure FSMO before seizure.
ldap_modify_sW error 0x34(52 (Unavailable).
Ldap extended error message is 000020AF: SvcErr: DSID-03210300, problem 5002
(UNAVAILABLE)
data 1722
Win32 error returned is 0x20af(The requested FSMO operation failed. The current FSMO
holde

r could not be contacted.)


)

Depending on the error code this may indicate a connection,

ldap, or role transfer error.


Transfer of infrastructure FSMO failed, proceeding with seizure ...
Server "server100" knows about 5 roles
Schema - CN=NTDS Settings,CN=SERVER200,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=netDomain - CN=NTDS
Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
PDC - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
RID - CN=NTDS Settings,CN=SERVER200,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
Infrastructure - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net

fsmo maintenance:

Note: All five roles need to be in the forest. If the first domain controller is out of the forest
then seize all roles. Determine which roles are to be on which remaining domain
controllers so that all five roles are not on only one server.

8. Repeat steps 6 and 7 until you've seized all the required FSMO roles.
9. After you seize or transfer the roles, type q, and then press ENTER until you quit the
Ntdsutil tool.

Note: Do not put the Infrastructure Master (IM) role on the same domain controller as the
Global Catalog server. If the Infrastructure Master runs on a GC server it will stop updating
object information because it does not contain any references to objects that it does not
hold. This is because a GC server holds a partial replica of every object in the forest.

What is the difference between authoritative and non-authoritative restore

In authoritative restore, Objects that are restored will be replicated to all domain
controllers in the domain. This can be used specifically when the entire OU is disturbed in
all domain controllers or specifically restore a single object, which is disturbed in all DC’s

In non-authoritative restore, Restored directory information will be updated by other


domain controllers based on the latest modification time.

What is Active Directory De-fragmentation?


De-fragmentation of AD means separating used space and empty space created by deleted
objects and reduces directory size (only in offline De-fragmentation)

Difference between online and offline de-fragmentation


The size of NTDS.DIT will often be different sizes across the domain controllers in a
domain. Remember that Active Directory is a multi-master independent model where
updates are occurring in each of the domain controllers with the changes being replicated
over time to the other domain controllers.

The changed data is replicated between domain controllers, not the database, so there is no
guarantee that the files are going to be the same size across all domain controllers.

Windows 2000 and Windows Server 2003 servers running Directory Services (DS) perform
a directory online defragmentation every 12 hours by default as part of the garbage-
collection process. This defragmentation only moves data around the database file
(NTDS.DIT) and doesn’t reduce the file’s size - the database file cannot be compacted while
Active Directory is mounted.

Active Directory routinely performs online database defragmentation, but this is limited to
the disposal of tombstoned objects. The database file cannot be compacted while Active
Directory is mounted (or online).

An NTDS.DIT file that has been defragmented offline (compacted), can be much smaller
than the NTDS.DIT file on its peers.

However, defragmenting the NTDS.DIT file isn’t something you should really need to do.
Normally, the database self-tunes and automatically tombstoning the records then
sweeping them away when the tombstone lifetime has passed to make that space available
for additional records.

Defragging the NTDS.DIT file probably won’t help your AD queries go any faster in the long
run.

So why defrag it in the first place?

One reason you might want to defrag your NTDS.DIT file is to save space, for example if you
deleted a large number of records at one time.
To create a new, smaller NTDS.DIT file and to enable offline defragmentation, perform the
following steps:
Back up Active Directory (AD).
Reboot the server, select the OS option, and press F8 for advanced options.
Select the Directory Services Restore Mode option, and press Enter. Press
Enter again to start the OS.
W2K will start in safe mode, with no DS running.
Use the local SAM’s administrator account and password to log on.
You’ll see a dialog box that says you’re in safe mode. Click OK.
From the Start menu, select Run and type cmd.exe
In the command window, you’ll see the following text. (Enter the commands in bold.)
C:\> ntdsutil
ntdsutil: files
file maintenance:info

....
file maintenance:compact to c:\temp

You’ll see the defragmentation process. If the process was successful, enter quit to return to
the command prompt.

Then, replace the old NTDS.DIT file with the new, compressed version. (Enter the
commands in bold.)
C:\> copy c:\temp\ntds.dit %systemroot%\ntds\ntds.dit

Restart the computer, and boot as normal.

What is tombstone period


Tombstones are nothing but objects marked for deletion. After deleting an object in AD the
objects will not be deleted permanently. It will be remain 60 days by default (which can be
configurable) it adds an entry as marked for deletion on the object and replicates to all
DC’s. After 60 days object will be deleted permanently from all Dc’s.

What is white space and Garbage Collection?

refer question 7

What are the monitoring tools used for Server and Network Heath. How to define
alert mechanism
Spot Light , SNMP Need to enable .

How to deploy the patches and what are the softwares used for this process
Using SUS (Software update services) server we can deploy patches to all clients in the
network. We need to configure an option called “Synchronize with Microsoft software
update server” option and schedule time to synchronize in server. We need to approve new
update based on the requirement. Then approved update will be deployed to clients
We can configure clients by changing the registry manually or through Group policy by
adding WUAU administrative template in group policy

What is Clustering. Briefly define & explain it

Clustering is a technology, which is used to provide High Availability for mission critical
applications. We can configure cluster by installing MCS (Microsoft cluster service)
component from Add remove programs, which can only available in Enterprise Edition and
Data center edition.
In Windows we can configure two types of clusters
NLB (network load balancing) cluster for balancing load between servers. This cluster will
not provide any high availability. Usually preferable at edge servers like web or proxy.

Server Cluster: This provides High availability by configuring active-active or active-


passive cluster. In 2 node active-passive cluster one node will be active and one node will
be stand by. When active server fails the application will FAILOVER to stand by server
automatically. When the original server backs we need to FAILBACK the application

Quorum: A shared storage need to provide for all servers which keeps information about
clustered application and session state and is useful in FAILOVER situation. This is very
important if Quorum disk fails entire cluster will fails
Heartbeat: Heartbeat is a private connectivity between the servers in the cluster, which is
used to identify the status of other servers in cluster.

How to configure SNMP

SNMP can be configured by installing SNMP from Monitoring and Management tools from
Add and Remove programs.
For SNMP programs to communicate we need to configure common community name for
those machines where SNMP programs (eg DELL OPEN MANAGER) running. This can be
configured from services.msc--- SNMP service -- Security

Is it possible to rename the Domain name & how?

In Windows 2000 it is not possible. In windows 2003 it is possible. On Domain controller


by going to MYCOMPUTER properties we can change.

What is SOA Record

SOA is a Start Of Authority record, which is a first record in DNS, which controls the startup
behavior of DNS. We can configure TTL, refresh, and retry intervals in this record.

What is a Stub zone and what is the use of it.


Stub zones are a new feature of DNS in Windows Server 2003 that can be used to
streamline name resolution, especially in a split namespace scenario. They also help reduce
the amount of DNS traffic on your network, making DNS more efficient especially over slow
WAN links.

What are the different types of partitions present in AD?


Active directory is divided into three partitions
Configuration Partition—replicates entire forest
Schema Partition—replicates entire forest
Domain Partition—replicate only in domain
Application Partition (Only in Windows 2003)
What are the (two) services required for replication
File Replication Service (FRS)
Knowledge Consistency Checker (KCC)

Can we use a Linux DNS Sever in 2000 Domain?


We can use, But the BIND version should be 8 or greater

What is the difference between IIS Version 5 and IIS Version 6?

Refer Question 1

What is ASR (Automated System Recovery) and how to implement it


ASR is a two-part system; it includes ASR backup and ASR restore. The ASR Wizard, located
in Backup, does the backup portion. The wizard backs up the system state, system services,
and all the disks that are associated with the operating system components. ASR also
creates a file that contains information about the backup, the disk configurations (including
basic and dynamic volumes), and how to perform a restore.

You can access the restore portion by pressing F2 when prompted in the text-mode portion
of setup. ASR reads the disk configurations from the file that it creates. It restores all the
disk signatures, volumes, and partitions on (at a minimum) the disks that you need to start
the computer. ASR will try to restore all the disk configurations, but under some
circumstances it might not be able to. ASR then installs a simple installation of Windows
and automatically starts a restoration using the backup created by the ASR Wizard.

What are the different levels that we can apply Group Policy
We can apply group policy at SITE level---Domain Level---OU level

What is Domain Policy, Domain controller policy, Local policy and Group policy
Domain Policy will apply to all computers in the domain, because by default it will be
associated with domain GPO, Where as Domain controller policy will be applied only on
domain controller. By default domain controller security policy will be associated with
domain controller GPO. Local policy will be applied to that particular machine only and
effects to that computer only.

What is the use of SYSVOL FOLDER?


Policies and scripts saved in SYSVOL folder will be replicated to all domain controllers in
the domain. FRS (File replication service) is responsible for replicating all policies and
scripts

What is folder redirection?


Folder Redirection is a User group policy. Once you create the group policy and link it to
the appropriate folder object, an administrator can designate which folders to redirect and
where To do this, the administrator needs to navigate to the following location in the Group
Policy Object:

User Configuration\Windows Settings\Folder Redirection


In the Properties of the folder, you can choose Basic or Advanced folder redirection, and
you can designate the server file system path to which the folder should be redirected.

The %USERNAME% variable may be used as part of the redirection path, thus allowing the
system to dynamically create a newly redirected folder for each user to whom the policy
object applies.

What different modes in windows 2003 (Mixed, native & intrim….etc)

What are the domain and forest function levels in a Windows Server 2003-
basedActive Directory?
Functional levels are an extension of the mixed/native mode concept introduced in
Windows 2000 to activate new Active Directory features after all the domain controllers in
the domain or forest are running the Windows Server 2003 operating system.

When a computer that is running Windows Server 2003 is installed and promoted to a
domain controller, new Active Directory features are activated by the Windows Server
2003 operating system over its Windows 2000 counterparts. Additional Active Directory
features are available when all domain controllers in a domain or forest are running
Windows Server 2003 and the administrator activates the corresponding functional level
in the domain or forest.

To activate the new domain features, all domain controllers in the domain must be running
Windows Server 2003. After this requirement is met, the administrator can raise the
domain functional level to Windows Server 2003 (read Raise Domain Function Level in
Windows Server 2003 Domains for more info).

To activate new forest-wide features, all domain controllers in the forest must be running
Windows Server 2003, and the current forest functional level must be at Windows 2000
native or Windows Server 2003 domain level. After this requirement is met, the
administrator can raise the domain functional level (read Raise Forest Function Level in
Windows Server 2003 Active Directory for more info).

Note: Network clients can authenticate or access resources in the domain or forest without
being affected by the Windows Server 2003 domain or forest functional levels. These levels
only affect the way that domain controllers interact with each other.

Important

Raising the domain and forest functional levels to Windows Server 2003 is a nonreversible
task and prohibits the addition of Windows NT 4.0–based or Windows 2000–based domain
controllers to the environment. Any existing Windows NT 4.0 or Windows 2000–based
domain controllers in the environment will no longer function. Before raising functional
levels to take advantage of advanced Windows Server 2003 features, ensure that you will
never need to install domain controllers running Windows NT 4.0 or Windows 2000 in
your environment.

When the first Windows Server 2003–based domain controller is deployed in a domain or
forest, a set of default Active Directory features becomes available. The following table
summarizes the Active Directory features that are available by default on any domain
controller running Windows Server 2003:

Feature Functionality

Multiple selection of user objects Allows you to modify common attributes of multiple user
objects at one time.
Drag and drop functionality Allows you to move Active Directory objects from container to
container by dragging one or more objects to a location in the domain hierarchy. You can
also add objects to group membership lists by dragging one or more objects (including
other group objects) to the target group.
Efficient search capabilities Search functionality is object-oriented and provides an efficient
search that minimizes network traffic associated with browsing objects.
Saved queries Allows you to save commonly used search parameters for reuse in Active
Directory Users and Computers
Active Directory command-line tools Allows you to run new directory service commands
for administration scenarios.
InetOrgPerson class The inetOrgPerson class has been added to the base schema as a
security principal and can be used in the same manner as the user class.
Application directory partitions Allows you to configure the replication scope for
application-specific data among domain controllers. For example, you can control the
replication scope of Domain Name System (DNS) zone data stored in Active Directory so
that only specific domain controllers in the forest participate in DNS zone replication.
Ability to add additional domain controllers by using backup media Reduces the time it
takes to add an additional domain controller in an existing domain by using backup media.
Universal group membership caching Prevents the need to locate a global catalog across a
wide area network (WAN) when logging on by storing universal group membership
information on an authenticating domain controller.
Secure Lightweight Directory Access Protocol (LDAP) traffic Active Directory
administrative tools sign and encrypt all LDAP traffic by default. Signing LDAP traffic
guarantees that the packaged data comes from a known source and that it has not been
tampered with.
Partial synchronization of the global catalog Provides improved replication of the global
catalog when schema changes add attributes to the global catalog partial attribute set. Only
the new attributes are replicated, not the entire global catalog.
Active Directory quotas Quotas can be specified in Active Directory to control the number
of objects a user, group, or computer can own in a given directory partition. Members of the
Domain Administrators and Enterprise Administrators groups are exempt from quotas.

When the first Windows Server 2003–based domain controller is deployed in a domain or
forest, the domain or forest operates by default at the lowest functional level that is
possible in that environment. This allows you to take advantage of the default Active
Directory features while running versions of Windows earlier than Windows Server 2003.

When you raise the functional level of a domain or forest, a set of advanced features
becomes available. For example, the Windows Server 2003 interim forest functional level
supports more features than the Windows 2000 forest functional level, but fewer features
than the Windows Server 2003 forest functional level supports. Windows Server 2003 is
the highest functional level that is available for a domain or forest. The Windows Server
2003 functional level supports the most advanced Active Directory features; however, only
Windows Server 2003 domain controllers can operate in that domain or forest.
If you raise the domain functional level to Windows Server 2003, you cannot introduce any
domain controllers that are running versions of Windows earlier than Windows Server
2003 into that domain. This applies to the forest functional level as well.
Domain Functional Level
Domain functionality activates features that affect the whole domain and that domain only.
The four domain functional levels, their corresponding features, and supported domain
controllers are as follows:

Windows 2000 mixed (Default)


• Supported domain controllers: Microsoft Windows NT 4.0, Windows 2000, Windows
Server 2003
• Activated features: local and global groups, global catalog support

Windows 2000 native


• Supported domain controllers: Windows 2000, Windows Server 2003
• Activated features: group nesting, universal groups, SidHistory, converting groups
between security groups and distribution groups, you can raise domain levels by increasing
the forest level settings

Windows Server 2003 interim


• Supported domain controllers: Windows NT 4.0, Windows Server 2003
• Supported features: There are no domain-wide features activated at this level. All
domains in a forest are automatically raised to this level when the forest level increases to
interim. This mode is only used when you upgrade domain controllers in Windows NT 4.0
domains to Windows Server 2003 domain controllers.

Windows Server 2003


• Supported domain controllers: Windows Server 2003
• Supported features: domain controller rename, logon timestamp attribute updated and
replicated. User password support on the InetOrgPerson objectClass. Constrained
delegation, you can redirect the Users and Computers containers.

Domains that are upgraded from Windows NT 4.0 or created by the promotion of a
Windows Server 2003-based computer operate at the Windows 2000 mixed functional
level. Windows 2000 domains maintain their current domain functional level when
Windows 2000 domain controllers are upgraded to the Windows Server 2003 operating
system. You can raise the domain functional level to either Windows 2000 native or
Windows Server 2003.

After the domain functional level is raised, domain controllers that are running earlier
operating systems cannot be introduced into the domain. For example, if you raise the
domain functional level to Windows Server 2003, domain controllers that are running
Windows 2000 Server cannot be added to that domain.

The following describes the domain functional level and the domain-wide features that are
activated for that level. Note that with each successive level increase, the feature set of the
previous level is included.
Forest Functional Level

Forest functionality activates features across all the domains in your forest. Three forest
functional levels, the corresponding features, and their supported domain controllers are
listed below.

Windows 2000 (default)

• Supported domain controllers: Windows NT 4.0, Windows 2000, Windows Server 2003

• New features: Partial list includes universal group caching, application partitions, install
from media, quotas, rapid global catalog demotion, Single Instance Store (SIS) for System
Access Control Lists (SACL) in the Jet Database Engine, Improved topology generation
event logging. No global catalog full sync when attributes are added to the PAS Windows
Server 2003 domain controller assumes the Intersite Topology Generator (ISTG) role.

Windows Server 2003 interim

• Supported domain controllers: Windows NT 4.0, Windows Server 2003. See the "Upgrade
from a Windows NT 4.0 Domain" section of this article.

• Activated features: Windows 2000 features plus Efficient Group Member Replication
using Linked Value Replication, Improved Replication Topology Generation. ISTG Aliveness
no longer replicated. Attributes added to the global catalog. ms-DS-Trust-Forest-Trust-Info.
Trust-Direction, Trust-Attributes, Trust-Type, Trust-Partner, Security-Identifier, ms-DS-
Entry-Time-To-Die, Message Queuing-Secured-Source, Message Queuing-Multicast-
Address, Print-Memory, Print-Rate, Print-Rate-Unit

Windows Server 2003


• Supported domain controllers: Windows Server 2003
• Activated features: all features in Interim Level, Defunct schema objects, Cross Forest
Trust, Domain Rename, Dynamic auxiliary classes, InetOrgPerson objectClass change,
Application Groups, 15-second intrasite replication frequency for Windows Server 2003
domain controllers upgraded from Windows 2000

After the forest functional level is raised, domain controllers that are running earlier
operating systems cannot be introduced into the forest. For example, if you raise forest
functional levels to Windows Server 2003, domain controllers that are running Windows
NT 4.0 or Windows 2000 Server cannot be added to the forest.

Different Active Directory features are available at different functional levels. Raising
domain and forest functional levels is required to enable certain new features as domain
controllers are upgraded from Windows NT 4.0 and Windows 2000 to Windows Server
2003

Domain Functional Levels: Windows 2000 Mixed mode, Windows 2000 Native mode,
Windows server 2003 and Windows server 2003 interim ( Only available when upgrades
directly from Windows NT 4.0 to Windows 2003)

Forest Functional Levels: Windows 2000 and Windows 2003

Ipsec usage and difference window 2000 & 2003.

Microsoft doesn’t recommend Internet Protocol security (IPSec) network address


translation (NAT) traversal (NAT-T) for Windows deployments that include VPN servers
and that are located behind network address translators. When a server is behind a
network address translator, and the server uses IPSec NAT-T, unintended side effects may
occur because of the way that network address translators translate network traffic

If you put a server behind a network address translator, you may experience connection
problems because clients that connect to the server over the Internet require a public IP
address. To reach servers that are located behind network address translators from the
Internet, static mappings must be configured on the network address translator. For
example, to reach a Windows Server 2003-based computer that is behind a network
address translator from the Internet, configure the network address translator with the
following static network address translator mappings:

• Public IP address/UDP port 500 to the server's private IP address/UDP port 500.

• Public IP address/UDP port 4500 to the server's private IP address/UDP port 4500.

These mappings are required so that all Internet Key Exchange (IKE) and IPSec NAT-T
traffic that is sent to the public address of the network address translator is automatically
translated and forwarded to the Windows Server 2003-based computer

How to create application partition windows 2003 and its usage?

An application directory partition is a directory partition that is replicated only to specific


domain controllers. A domain controller that participates in the replication of a particular
application directory partition hosts a replica of that partition. Only domain controllers
running Windows Server 2003 can host a replica of an application directory partition.

Applications and services can use application directory partitions to store application-
specific data. Application directory partitions can contain any type of object, except
security principals. TAPI is an example of a service that stores its application-specific data
in an application directory partition.

Application directory partitions are usually created by the applications that will use them
to store and replicate data. For testing and troubleshooting purposes, members of the
Enterprise Admins group can manually create or manage application directory partitions
using the Ntdsutil command-line tool.
Is it possible to do implicit transitive forest to forest trust relationship in windows 2003?

Implicit Transitive trust will not be possible in windows 2003. Between forests we can
create explicit trust

Two-way trust

One-way: incoming

One-way: Outgoing

What is universal group membership cache in windows 2003?

Information is stored locally once this option is enabled and a user attempts to log on for
the first time. The domain controller obtains the universal group membership for that user
from a global catalog. Once the universal group membership information is obtained, it is
cached on the domain controller for that site indefinitely and is periodically refreshed. The
next time that user attempts to log on, the authenticating domain controller running
Windows Server 2003 will obtain the universal group membership information from its
local cache without the need to contact a global catalog.

By default, the universal group membership information contained in the cache of each
domain controller will be refreshed every 8 hours.

GPMC & RSOP in windows 2003?

GPMC is tool which will be used for managing group policies and will display information
like how many policies applied, on which OU’s the policies applied, What are the settings
enabled in each policy, Who are the users effecting by these polices, who is managing these
policies. GPMC will display all the above information.

RSoP provides details about all policy settings that are configured by an Administrator,
including Administrative Templates, Folder Redirection, Internet Explorer Maintenance,
Security Settings, Scripts, and Group Policy Software Installation.

When policies are applied on multiple levels (for example, site, domain, domain controller,
and organizational unit), the results can conflict. RSoP can help you determine a set of
applied policies and their precedence (the order in which policies are applied).

Assign & Publish the applications in GP & how?

Through Group policy you can Assign and Publish the applications by creating .msi package
for that application
With Assign option you can apply policy for both user and computer. If it is applied to
computer then the policy will apply to user who logs on to that computer. If it is applied on
user it will apply where ever he logs on to the domain. It will be appear in Start menu—
Programs. Once user click the shortcut or open any document having that extension then
the application install into the local machine. If any application program files missing it will
automatically repair.

With Publish option you can apply only on users. It will not install automatically when any
application program files are corrupted or deleted.

DFS in windows 2003?

Refer Question 17 on level 2

How to use recovery console?


The Windows 2000 Recovery Console is a command-line console that you can start from
the Windows 2000 Setup program. Using the Recovery Console, you can start and stop
services, format drives, read and write data on a local drive (including drives formatted to
use NTFS), and perform many other administrative tasks. The Recovery Console is
particularly useful if you need to repair your system by copying a file from a floppy disk or
CD-ROM to your hard drive, or if you need to reconfigure a service that is preventing your
computer from starting properly. Because the Recovery Console is quite powerful, it should
only be used by advanced users who have a thorough knowledge of Windows 2000. In
addition, you must be an administrator to use the Recovery Console.
There are two ways to start the Recovery Console:

If you are unable to start your computer, you can run the Recovery Console from your
Windows 2000 Setup disks or from the Windows 2000 Professional CD (if you can start
your computer from your CD-ROM drive).
As an alternative, you can install the Recovery Console on your computer to make it
available in case you are unable to restart Windows 2000. You can then select the Recovery
Console option from the list of available operating systems

PPTP protocol for VPN in windows 2003?

Point-to-Point-Tunneling Protocol (PPTP) is a networking technology that supports


multiprotocol virtual private networks (VPN), enableing remote users to access corporate
networks securely across the Microsoft Windows NT® Workstation, Windows® 95, and
Windows 98 operating systems and other point-to-point protocol (PPP)-enabled systems
to dial into a local Internet service provider to connect securely to their corporate network
through the Internet

Netdom.exe is domain management tool to rename domain controller

You might also like