Ippm Huawei

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Backhaul Network Performance

Monitoring Analysis

Rock Xie
www.huawei.com

HUAWEI TECHNOLOGIES Co., Ltd.


Requirements about Passive Measurement
In NGMN Optimized Backhaul Requirements document, there are several
requirements about RAN sharing, which leads to the bandwidth adjustment
requirements.
The NGMN bandwidth requirements point that In case of RAN Sharing, the
eNB/aGW transport modules should priorities the traffic of a certain operator
within a certain portion of the overall transport bandwidth. This will enable a
fair use of transport resources in the case where the two operators have
different strategies.
The NGMN connective requirements point that The NGMN Backhaul
solution MUST allow connecting each e-NB to one or several aGWs (i.e. S1
interface in 3GPP LTE standard) for multi-homing purpose (e.g. S1-flex in
3GPP LTE standard) or multi-operator RAN Sharing reason.
In backhaul network, there must be performance monitoring mechanism to
check the traffic status in the network, with the status information, eNBs can
priorities the traffic of a certain operator within a certain portion of the overall
transport bandwidth as the NGMN requirements.
HUAWEI TECHNOLOGIES CO., LTD.
Solution from Huawei
IP Performance Monitoring Adaptive Bandwidth Adjustment
FSN n
Total packet sent (PkTx)
FSN n
Total byte sent (ByteTx)
Total packet sent (PkTx)
Sending FM packet time (T1)
Total byte sent (ByteTx)
Total packet received (PkRx)
Sending FM packet time (T1)
Total byte received (ByteTx)
Receiving FM packet time (T2)

1 eNB performs periodic Forward Monitoring Sending BR packet time (T3)

Transport Network
FM FM

BR
BR
eNB sGW
3 eNB calculates jitter & RTT & packet loss 2 sGW replies a Backward Report packet
ratio after receiving a BR packet after receiving a FM packet

4 eNB performs periodic logical port bandwidth adjustment according


to the mean jitter and the mean packet loss ratio in the interval

IP Performance Monitroring Maintain fairness and differentiation between flow-


control services in transport bandwidth variation scenarios

HUAWEI TECHNOLOGIES CO., LTD. Page 2


An IP Performance Monitoring cycle
eNB S-GW

Record total packet


and byte sent FM
FSN n
Total packet sent (PkTx)
Total byte sent (ByteTx)
Calculate packet loss
ratio & jitter &RTT Sending FM packet time (T1)

BR Record total packet


FSN n and byte received
FSN n Total packet sent (PkTx)

Total packet sent (PkTx) Total byte sent (ByteTx)

Total byte sent (ByteTx) Sending FM packet time (T1)

Sending FM packet time (T1) Total packet received (PkRx)

Total packet received (PkRx) Total byte received (ByteTx)

Total byte received (ByteTx) Receiving FM packet time (T2)

Receiving FM packet time (T2) Sending BR packet time (T3)

Sending BR packet time (T3)


Receiving BR packet time (T4)

eNB sends a FM packet periodically


S-GW replies a BR packet after receiving a FM packet
eNB calculates the IP QoS performance after receiving a S-GW packet

HUAWEI TECHNOLOGIES CO., LTD.


Proposal and question
Proposal:
Standardize the Passive Measurement negotiation process
Standardize the Passive measurement metrics
Question:
If the Passive Measurement standardization work can be done in IPPM
working group?
Is it possible to build another working group which focuses on Passive
Measurement?

HUAWEI TECHNOLOGIES CO., LTD.


Thank You
www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD. Page 5

You might also like