Scribd Logo
Upload

Welcome to Scribd!

  • 70 views

    4 Wan Load Balancing Different Networks

    Uploaded by

    Juan Ignacio d'Valle III
    The document outlines Mikrotik router configuration steps which include: 1) Assigning IP addresses to router ports and interfaces 2) Adding firewall mangle rules to mark and route traffic through specific interfaces 3) Configuring static routes through each interface gateway 4) Adding NAT rules to masquerade traffic through each interface 5) Configuring DNS settings to resolve hostnames through multiple DNS servers

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    4 Wan Load Balancing Different Networks

    Uploaded by

    Juan Ignacio d'Valle III
    70 views2 pages
    The document outlines Mikrotik router configuration steps which include: 1) Assigning IP addresses to router ports and interfaces 2) Adding firewall mangle rules to mark and route traffic through specific interfaces 3) Configuring static routes through each interface gateway 4) Adding NAT rules to masquerade traffic through each interface 5) Configuring DNS settings to resolve hostnames through multiple DNS servers

    Original Description:

    4 Wan Load Balancing Different Segment Networks

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines Mikrotik router configuration steps which include: 1) Assigning IP addresses to router ports and interfaces 2) Adding firewall mangle rules to mark and route traffic through specific interfaces 3) Configuring static routes through each interface gateway 4) Adding NAT rules to masquerade traffic through each interface 5) Configuring DNS settings to resolve hostnames through multiple DNS servers

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    70 views2 pages

    4 Wan Load Balancing Different Networks

    Uploaded by

    Juan Ignacio d'Valle III
    The document outlines Mikrotik router configuration steps which include: 1) Assigning IP addresses to router ports and interfaces 2) Adding firewall mangle rules to mark and route traffic through specific interfaces 3) Configuring static routes through each interface gateway 4) Adding NAT rules to masquerade traffic through each interface 5) Configuring DNS settings to resolve hostnames through multiple DNS servers

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Mikrotik (MT) Config

    We start by giving and IP address to the MT Router ports and renaming the ports that its easier to
    manage.

    /ip address

    add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=WANOUT


    add address=192.168.1.200/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1
    add address=192.168.2.200/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2
    add address=192.168.3.200/24 network=192.168.3.0 broadcast=192.168.3.255 interface=WAN3
    add address=192.168.4.200/24 network=192.168.4.0 broadcast=192.168.4.255 interface=WAN4

    Here we will add the firewall Mangle rules

    /ip firewall mangle

    add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn


    add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn
    add chain=input in-interface=WAN3 action=mark-connection new-connection-mark=WAN3_conn
    add chain=input in-interface=WAN4 action=mark-connection new-connection-mark=WAN4_conn

    add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1


    add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2
    add chain=output connection-mark=WAN3_conn action=mark-routing new-routing-mark=to_WAN3
    add chain=output connection-mark=WAN4_conn action=mark-routing new-routing-mark=to_WAN4

    add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=WANOUT


    add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=WANOUT
    add chain=prerouting dst-address=192.168.3.0/24 action=accept in-interface=WANOUT
    add chain=prerouting dst-address=192.168.4.0/24 action=accept in-interface=WANOUT

    add chain=prerouting dst-address-type=!local in-interface=WANOUT per-connection-classifier=both-


    addresses-and-ports:4/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes
    add chain=prerouting dst-address-type=!local in-interface=WANOUT per-connection-classifier=both-
    addresses-and-ports:4/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes
    add chain=prerouting dst-address-type=!local in-interface=WANOUT per-connection-classifier=both-
    addresses-and-ports:4/2 action=mark-connection new-connection-mark=WAN3_conn passthrough=yes
    add chain=prerouting dst-address-type=!local in-interface=WANOUT per-connection-classifier=both-
    addresses-and-ports:4/3 action=mark-connection new-connection-mark=WAN4_conn passthrough=yes

    add chain=prerouting connection-mark=WAN1_conn in-interface=WANOUT action=mark-routing new-


    routing-mark=to_WAN1
    add chain=prerouting connection-mark=WAN2_conn in-interface=WANOUT action=mark-routing new-
    routing-mark=to_WAN2
    add chain=prerouting connection-mark=WAN3_conn in-interface=WANOUT action=mark-routing new-
    routing-mark=to_WAN3
    add chain=prerouting connection-mark=WAN4_conn in-interface=WANOUT action=mark-routing new-
    routing-mark=to_WAN4

    Now add the routes so that the MT router know what its gateways are.

    /ip route
    add dst-address=0.0.0.0/0 gateway=192.168.1.254 routing-mark=to_WAN1 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.2.254 routing-mark=to_WAN2 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.3.254 routing-mark=to_WAN3 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.4.254 routing-mark=to_WAN4 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.1.254 distance=1 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.2.254 distance=2 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.3.254 distance=3 check-gateway=ping
    add dst-address=0.0.0.0/0 gateway=192.168.4.254 distance=4 check-gateway=ping

    Next the Firewall Nat Rules

    /ip firewall nat


    add chain=srcnat out-interface=WAN1 action=masquerade
    add chain=srcnat out-interface=WAN2 action=masquerade
    add chain=srcnat out-interface=WAN3 action=masquerade
    add chain=srcnat out-interface=WAN4 action=masquerade

    Lastly we need to add the DNS server that we can resolve hostnames

    /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512


    servers= 192.168.1.254,192.168.2.254,192.168.3.254,192.168.4.254

    You might also like