DIESEL GENERATOR SET

MTU 16V4000 DS2250

380V 11 kV/50 Hz/Standby Power/Fuel Consumption Optimized
MTU 16V4000G23/Water Charge Air Cooling

Optional equipment and finishing shown. Standard may vary.

Product Highlights
// Benefits // Performance Assurance Certification (PAC)
- Low fuel consumption - Engine-generator set tested to ISO 8528-5 for transient
- Optimized system integration ability response
- High reliability - 85% load factor
- High availability of power - Verified product design, quality and performance integrity
- Long maintenance intervals - All engine systems are prototype and factory tested

// MTU Onsite Energy is a single-source supplier // Complete range of accessories available

- Control panel
// Support - Power panel
- Global product support offered - Circuit breaker/power distribution
- Fuel system
// Standards - Fuel connections with shut-off valve mounted to base frame
- Engine-generator set is designed and manufactured in - Starting/charging system
facilities certified to standards ISO 2008:9001 and - Exhaust system
ISO 2004:14001 - Mechanical and electrical driven radiators
- Generator set complies to ISO 8528 - Medium and oversized voltage alternators
- Generator meets NEMA MG1, BS5000, ISO, DIN EN and
IEC standards // Emissions
- NFPA 110 - Fuel consumption optimized

// Power
Rating // Certifications
- System ratings: 2260 kVA - 2370 kVA - CE certification option
- Accepts rated load in one step per NFPA 110 - Unit certificate acc. to BDEW (German Grid-Code)
- Generator set complies to G3 according to ISO 8528-5
- Generator set exceeds load steps according to ISO 8528-5
 2 / // / MTU 16V4000 DS2250 / 50 Hz / 380V - 11kV

Application data
// Engine // Liquid Capacity (Lubrication)

Manufacturer MTU Total oil system capacity: l 300

Model 16V4000G23 Engine jacket water capacity: l 175
Type 4-cycle Intercooler coolant capacity: l 50
Arrangement 16V
Displacement: l 76.3 //
Combustion Air Requirements
Bore: mm 170
Stroke: mm 210 Combustion air volume: m3/s 2.3
Compression ratio 16.4 Max. air intake restriction: mbar 50
Rated speed: rpm 1500
Engine governor ADEC (ECU 7) //
Cooling/Radiator System
Max power: kWm 1965
Air cleaner Dry Coolant flow rate (HT circuit): m3/h 68.5
Coolant flow rate (LT circuit): m3/h 30
// Fuel System Heat rejection to coolant: kW 730
Heat radiated to charge air cooling: kW 320
Maximum fuel lift: m 5 Heat radiated to ambient: kW 90
Total fuel flow: l/min 20 Fan power for electr. radiator (40C): kW 38

// Fuel Consumption //
Exhaust System
l/hr g/kwh
At 100% of power rating: 452.23 191 Exhaust gas temp. (after turbocharger): C 485
At 75% of power rating: 342.7 193 Exhaust gas volume: m3/s 5.8
At 50% of power rating: 240.3 203 Maximum allowable back pressure: mbar 85
Minimum allowable back pressure: mbar 30

All data refers only to the engine and is based on ISO standard conditions (25C and 100m above sea level).
Values referenced are in accordance with ISO 3046-1. Conversion calculated with fuel density of 0.83 g/ml.
All fuel consumption values refer to rated engine power.
 3 / // / MTU 16V4000 DS2250 / 50 Hz / 380V - 11kV

Standard and Optional Features

// System Ratings (kW/kVA)

Generator model Voltage Fuel consumption optimized 40C/400m

without radiator with mechanical radiator
kWel kVA* AMPS kWel kVA* AMPS
Leroy Somer LSA52.3 S7 380 V 1864 2330 3540 1840 2300 3494
(Low voltage 400 V 1864 2330 3363 1840 2300 3320
Leroy Somer standard) 415 V 1864 2330 3242 1840 2300 3200
Marathon 744RSL7092 380 V 1848 2310 3510 1808 2260 3434
(Low voltage Marathon) 400 V 1848 2310 3334 1808 2260 3262
415 V 1808 2260 3144 1808 2260 3144
Marathon 1020FDL7093 380 V 1848 2310 3510 1808 2260 3434
(Low voltage 400 V 1848 2310 3334 1808 2260 3262
Marathon oversized) 415 V 1808 2260 3144 1808 2260 3144
Marathon 1020FDL7093 380 V 1896 2370 3601 1856 2320 3525
(Low voltage Marathon 400 V 1864 2330 3363 1824 2280 3291
engine output optimzed) 415 V 1864 2330 3242 1824 2280 3172
Marathon 1020FDH7097 11 kV 1864 2330 122 1808 2260 119
(Medium volt. marathon)
Leroy Somer LSA53.2 XL9 11 kV 1880 2350 123 1840 2300 121
(Medium volt. Leroy Somer)

* cos phi = 0,8

// Engine

4-Cycle Closed crankcase ventilation Fuel consumption optimized engine

Standard single stage air filter Governor-electronic isochronous
Oil drain extension & shut-off valve Common rail fuel injection

// Generator

4 pole three-phase synchronous Short circuit capability 3xIn for 10sec Leroy Somer low voltage generator
generator Winding and bearing RTDs Marathon low voltage generator
Brushless, self-excited, self-regulating, (without monitoring) Oversized generator
self-ventilated Excitation by AREP Medium voltage generator
Digital voltage regulator Mounting of CTs: 2 core CTs Engine output optimized generator
Anti condensation heater Winding pitch: 2/3 winding
Stator winding Y-connected, Voltage setpoint adjustment 10%
accessible neutral (brought out) Meets NEMA MG-1, BS 5000,
Protection IP23 IEC 60034-1, VDE 0530,
Insulation class H, utilization acc. to H DIN EN 12601, AS1359 and ISO 8528
Radio suppression EN55011, requirements
group 1, cl. B

Represents standard features Represents optional features

 4 / // / MTU 16V4000 DS2250 / 50 Hz / 380V - 11kV

Standard and Optional Features, continuation

// Cooling System

Jacket water pump Mechanical radiator

Thermostat(s) Electrical driven front-end cooler
Water charge air cooling Jacket water heater

// Control Panel

Pre-wired control cabinet for easy Basler controller Different expansion modules
application of customized controller Deif controller Remote annunciator
(V1+) Complete system metering Daytank control
Island operation (V2) Digital metering Generator winding temperature
Automatic mains failure operation Engine parameters monitoring
with ATS (V3a) Generator Protection Functions Generator bearing temperature
Automatic mains failure operation Engine protection monitoring
incl. control of generator and mains SAE J1939 engine ECU Modbus TCP-IP
breaker (V3b) communications
Island parallel operation of multiple Parametrization software
gensets (V4) Multilingual capability
Automatic mains failure operation Multiple programmable contact inputs
with short (< 10s) mains parallel Multiple contact outputs
overlap synchronization (V5) Event recording
Mains parallel operation of IP 54 front panel rating with
a single genset (V6) integrated gasket
Mains parallel operation of
multiple gensets (V7)

// Power Panel

Available in 600x600 and 600x1000 Supply for anti condensation heating Supply electrical driven radiator
Phase monitoring relay 230V/400V Plug socket cabinet for 230V from 45kW 75kW (PP 600x1000)
Supply for battery charger compatible Euro/USA
Supply for jacket water heater

// Circuit Breaker/Power Distribution

3-pole circuit breaker Manual-actuated circuit breaker Stand-alone solution in seperate

4-pole circuit breaker Electrical-actuated circuit breaker cabinet

Represents standard features Represents optional features

 5 / // / MTU 16V4000 DS2250 / 50 Hz / 380V - 11kV

Standard and Optional Features, continuation

// Fuel System

Flexible fuel connectors mounted to Switchable fuel filter with Fuel cooler integrated into
base frame water separator cooling equipment
Fuel filter with water separator Switchable fuel filter with
Fuel filter with water separator water separator heavy-duty
heavy-duty Seperate fuel cooler

// Starting/Charging System

24V starter Starter batteries, cables, rack, Battery charger

disconnect switch

// Mounting System

Welded base frame Resilient engine and generator Modular base frame design
mounting

// Exhaust System

Exhaust bellows with connection Exhaust silencer with 30 dB(A) sound Y-connection-pipe
flange attenuation
Exhaust silencer with 10 dB(A) sound Exhaust silencer with 40 dB(A) sound
attenuation attenuation

Represents standard features Represents optional features

 6 / // / MTU 16V4000 DS2250 / 50 Hz / 380V - 11kV

Weights and dimensions

Drawing above for illustration purposes only, based an standard open power 400 Volt engine-generator set. Lengths may vary with other voltages. Do not use for installation design.
See website for unit specific template drawings.

System Dimensions (LxWxH) Weight (dry/less tank)

Open Power Unit (OPU) 4766 x 1810 x 2330 mm 12428 kg
Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific engine-generator set.

Sound data
// Consult your local MTU Onsite Energy distributor for sound data.

Emissions data
// Consult your local MTU Onsite Energy distributor for emissions data.

Rating Definitions and conditions

// Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to varying loads for
the duration of a power outage. No overload capability for this rating. Ratings are in accordance with ISO 8528-1, ISO-3046-1,
BS 5514 and AS 2789. Average Load Factor: 85%. Operating hours/year: max. 500.
// Deration factor:
Altitude: Consult your local MTU Onsite Energy Power Generation distributor for altitude derations.
Subject to change. | 3237581 | Edition 02/17 | EPC 2017-02.
Temperature: Consult your local MTU Onsite Energy Power Generation distributor for temperature derations.

Rated power is available up to 40C and 400m above sea level.

Materials and specifications subject to change without notice.

MTU Onsite Energy

Part of the Rolls-Royce Group

www.mtuonsiteenergy.com