QRNG

an Enpro Industries company

QUINCY QRNG SERIES

RECIPROCATING GAS COMPRESSORS
234 HP
SUCTION TO 50 PSIG
DISCHARGE TO 500 PSIG
 QUINCY QRNG SERIES

THE QUINCY QRNG SERIES INCLUDES 2-34 HP, SINGLE STAGE

& 13-33 HP TWO-STAGE MODELS DELIVERING UP TO 225 MCFD

Proven performance measured in decades

Engineered for demanding applications
Maintenance accessibility and efficiency
Sweet gas boosting, 10 PPM maximum H2S sour gas content
Low cost gas compression

PROVEN PERFORMANCE FOR ALL

NATURAL GAS APPLICATIONS GAS UNLOADERS

The engineering behind the Quincy QRNG is The Quincy QRNG optional gas unloaders are
best examined through the proven performance mounted and supplied with tubing which require
of the Quincy QR-25. With over two million a tie-in to the customer-supplied activation and
Quincy QR-25 air compressors currently in use, control system. This results in easier compressor
some originally installed more than 40 years ago, start-up and provides the
you can count on the Quincy QRNG for ability to handle changes in
economical gas boosting needs. capacity requirements.

ENGINEERED DURABILITY

The Quincy QRNG is constructed of heavy-duty

cast-iron for strength and durability just like
the Quincy QR-25. The cylinders are cast-iron
with horizontal cooling fins and machined to
precision tolerances. Quincys state-of-the-art QUICK & EASY MAINTENANCE
manufacturing ensures optimum performance
and high volumetric efficiency. Engineered for lasting performance, the Quincy
QRNG has been designed for quick and easy
The Quincy QRNG also features an advanced maintenance. For example, valves often require
design pressure lubrication system, rebuildable the most maintenance. Not only are Quincys
connecting rods and low-lift valves. The Quincy heavy-duty, disc-type valves efficient they are
QRNG is uniquely engineered to meet even the accessible without having to remove the cylinder
most demanding natural gas applications. head, unhook the discharge lines, unbolt the
intercoolers, or any other typical valve
maintenance procedures.

2 quincycompressor.com/naturalgas | Made in the U.S.A.

 an EnPro Industries company

QUINCY QRNG GAS COMPRESSOR - FEATURES & BENEFITS

Individual valve pockets Cast-iron valve seats are lapped

allow easy access for for a total seal, eliminating
routine maintenance. the need for a discharge
line check valve.

High-pressure pistons
are cast-iron for strength Steel valve discs use a
and long life. unique low lift design and
cast-iron bumpers for increased
efficiency and less downtime.

Cast-iron cylinders
maintain rigid tolerances
for high efficiency.
Aluminum connecting rods
with oil passage for full flow
lubrication to piston pins to
extend compressor life.
Intercooler has large circular
fins for maximum heat
dissipation and longer life.

Rifle-drilled, counter-weighted,
one-piece crankshaft reduces
vibration, extends life of
bearings and wrist pins.

Tapered roller bearings are Cast-iron crankcase Pressure lubrication with positive Spin-on oil filter
oversized and easily adjusted and flywheel for strength displacement oil pump to assure constant for convenient changes
for trouble-free operation. and durability. lubrication of all critical wear areas. and clean lubrication.

QUALITY FEATURES PERFORMING QUALITY FUNCTIONS

Slow speed operation requires less maintenance, produces more Heavy-duty, low-lift disc-type valves with Swedish steel discs,
CFM per horsepower. cast-iron bumpers and seats for long life.
Valve design lets the QRNG run efficiently at lower temperatures. Rebuildable high-strength aluminum alloy connecting rods
Lubricating system features advanced-design gerotor oil pump equipped with replaceable automotive-type inserts.
and heavy-duty oil filter for improved life and reliability. Crankshaft ends are supported by large Timken tapered roller
Fully counterweighted ductile iron crankshaft, precision-ground main bearings to withstand radial and thrust loads.
to .0002 roundness. Large fan-type flywheel for smooth running and efficient
Crankshaft and connecting rods are rifled-drilled to assure heat dissipation.
positive pressure lubrication to all critical wear areas. Optional gas unloaders with steel vent line.
Piston pin needle bearings for strength and long life.

3
 QUINCY QRNG SERIES
an EnPro Industries company

NO YELLOW METALS
All yellow metals have been replaced with Screw-in dipstick with O-ring seal prevents
steel or aluminum for corrosion resistance. gases from venting to atmosphere
In addition, all seals are made of Viton Customer connection point for venting of
materials for corrosion and wear resistance. crankcase and gas unloader to a safe area
provided
STANDARD QUALITY FEATURES Two-stage models are capable of handling
Rebuildable components inlet pressures up to 30 psig maximum; except
Low maintenance requirements model 5120NG which is limited up to 15 psig
Manually reversible oil pump allows maximum
application flexibility Two-stage maximum discharge pressure is 500
All three single-stage models are capable psig for models 325NG & 340NG, 400 psig
of handling inlet pressures from 15 Hg for models 350NG & 370NG and 325 psig for
(vacuum) to 50 PSIG model 5120NG
Single-stage maximum discharge Optional gas unloaders allow for easy start-up
pressure is 125 PSIG and the ability to handle capacity changes

QUINCY QRNG SINGLE-STAGE COMPRESSORS

Model Bore & Min Max CFM Displacement Max Inlet Max Discharge Max
No. Stroke RPM RPM @ Max RPM pressure pressure BHP
216 NG 3x3x2.5*** 400 900 18.4 50 125 5.5
240 NG 4x4x3* 400 900 39.3 50 125 10.9
270 NG 4.5x4.5x4* 400 900 66.3 50 125 18.3
4125 NG 4.5x4.5x4** 400 900 132.5 50 125 34.5

QUINCY QRNG TWO-STAGE COMPRESSORS

Model Bore & Min Max CFM Displacement Max Inlet Max Discharge Max
No. Stroke RPM RPM @ Max RPM pressure pressure BHP
325 NG 4.5x2.5x3* 400 900 24.9 30 500 13.2
340 NG 5.25x3x3.5* 400 900 39.5 30 500 20.00
350 NG 6x3.25x3.5* 400 900 53.7 30 400 23.8
370 NG 6x3.25x4* 400 900 61.6 30 400 27.7
5120 NG 6x3.25x4** 400 900 123.2 15 325 33.0
* Two-cylinder
** Four-cylinder
*** Available 1st quarter 2008 (two-cylinder)

701 N. Dobson Avenue

Bay Minette, AL 36507
Phone 217.222.7700
Fax 217.222.5232

Email:
[email protected] 2007 Quincy Compressor an EnPro Industries company. All rights reserved. Litho in U.S.A. (QRNG-004 11/07)

quincycompressor.com/naturalgas | Made in the U.S.A.