Exam: 310-875 Titl E: Level1-Field Engineer Examination
Exam: 310-875 Titl E: Level1-Field Engineer Examination
Exam: 310-875 Titl E: Level1-Field Engineer Examination
Ver : 08.30.07
310-875
QUESTION 1
How many system controllers can be configured on the Sun Fire 15K?
A. 3
B. 4
C. 2
D. 0
Answer: C
QUESTION 2
What command must be run at the domain ok prompt to generate a core file?
A. ~#
B. sync
C. boot
D. reset-all
Answer: B
QUESTION 3
What log contains data about failed setkeyswitch commands?
A. /var/adm/messages
B. post log
C. domain console
D. domain messages
Answer: B
QUESTION 4
What file contains the internal and logical network configuration information?
A. networks
B. MAN.cf
C. smsconfig
D. net.conf
Answer: B
QUESTION 5
Which of the following devices can be used with STMS?
A. D1000
B. SSA
C. T3
D. A3500
Answer: C
QUESTION 6
Which of the following commands configures the UNIX groups used by SMS?
A. smsconfig -g
B. netgroup
C. admintool
D. smssetup group
Answer: A
QUESTION 7
Where is the GUID derived from?
Answer: A
QUESTION 8
Which of the following is NOT a function of Sun MC?
A. panicing a domain
B. creating a domain
C. starting a domain
D. hosting a domain
Answer: B
QUESTION 9
Which layer is responsible for submitting requests to the STMS framework?
A. system
B. application
C. vHCI
D. scsi-3
Answer: C
QUESTION 10
What command is run to remove a Slot 0 board from a domain blacklist file?
A. enablecomponent -d a sb1
B. addboard -d a sb1
C. addboard sb1
D. enablecomponent sb1
Answer: A
QUESTION 11
Where is the blacklist file?
A. /etc/opt/SUNWSMS/confi/platform
B. /export/home/SUNWSMS
C. /var/opt/SUNWSMS/adm
D. /opt/SUNWSMS/
Answer: A
QUESTION 12
What does ASR stand for?
Answer: D
QUESTION 13
What command can be run to find the OBP firmware revision level?
A. prtconf -vp
B. prtconf
C. format
D. prtdiag -v
Answer: D
QUESTION 14
At what rate is the bus snooped for addresses on a board set?
Answer: D
QUESTION 15
Where are the system controller domain log files located?
A. /var/opt/SUNWSMS/A
B. /var/opt/SUNWSMS/platform/A/adm
C. /etc/opt/SUNWSMS/adm/A
D. /var/opt/SUNWSMS/adm/<domain>
Answer: D
QUESTION 16
What command would be used to send a XIR break to a domain?
A. reset -d A -XIR
B. reset -d A
C. reset -d A -x
D. hostint
Answer: C
QUESTION 17
Which line of servers preceded The Sun Fire line?
A. Enterprise
B. Classic
C. Super
D. Cobalt
Answer: A
QUESTION 18
What SMS package must be installed first?
A. SUNWSMS
B. SUNWSMSop
C. SUNWSMSpo
D. SUNWSMSr
Answer: D
QUESTION 19
Which command would be used to perform the initial setup of a domain?
A. smssetup
B. deletetag
C. addboard
D. smsconfig
Answer: C
QUESTION 20
What command displays system events stored in the system controller message buffer?
A. showsc
B. showlogs
C. tail -f
D. dmesg
Answer: B
QUESTION 21
What is the default path used by the console command while a domain is running
Solaris?
A. I2 MAN network
B. JTAG
C. I1 MAN network
D. IOSRAM
Answer: C
QUESTION 22
What command is used to display the domain TOD?
A. setdate -d b
B. date -d b
C. showdate -d b
D. rdate -d b
Answer: C
QUESTION 23
What command displays the ACL and domain state of each domain?
A. showboards
B. showdomains
C. domain_status
D. showplatform
Answer: D
QUESTION 24
Why is the SC Peripheral board attached to the CSB?
Answer: B
QUESTION 25
Which of the following is normally required for populating a domain? Select all that
apply.
A. Slot 0 board
B. Network interface
C. Slot 1 board
D. Domain key
Answer: A,C
QUESTION 26
What command sets up the ACL for domains?
A. setupplatform
B. addboard
C. smsconfig
D. domain_create
Answer: A
QUESTION 27
What command must be run on a StorEdge T3 disk array to support STMS?
Answer: D
QUESTION 28
What is the default login id for the platform administrator?
A. root
B. sms
C. sms-svc
D. admin
Answer: C
QUESTION 29
What command should be run to show all possible network boot devices?
A. boot -net
B. nvramrc
C. show-nets
D. probe-net
Answer: C
QUESTION 30
Where is the platform blacklist file located?
A. /etc/opt/SUNWSMS/config/platform
B. /var/opt/SUNWSMS/blacklist/platform
C. /etc/opt/SUNWSMS/blacklist/platform
D. /var/opt/SUNWSMS/config/platform
Answer: A
QUESTION 31
What is one of the advantages of using STMS?
A. Increased diagnostics
B. Decreased I/O overhead
C. Decreased availability
D. Increased performance
Answer: D
QUESTION 32
What utility can be run on a system controller to assist in gathering domain failure data?
A. explorer
B. crash
C. sysdef
D. kadb
Answer: A
QUESTION 33
Which of the following cannot be powered off via the poweroff command?
A. Power supply
B. Centerplane
C. System controller
D. Expander board
Answer: B
QUESTION 34
What is one of the advantages of using IPMP?
A. auto-configuration
B. decreased network overhead
C. increased performance
D. increased reporting
Answer: C
QUESTION 35
What does the resetsc command do?
Answer: C
QUESTION 36
What file contains information about why a cpu was added to the ASR blacklist?
A. Platform log
B. Domain messages file
C. Domain console log
D. SC /var/adm/messages
Answer: A
QUESTION 37
What symbol differentiates between a spare system controller and a main?
A. Circled M
B. Circles slash
C. Circled S
D. Circled X
Answer: D
QUESTION 38
What command is used to create a resetinfo file?
A. reset
B. sigbcmd
C. reset -x
D. hostreset
Answer: C
QUESTION 39
What type of I/O architecture does the Sun Fire 15K use?
A. PCI
B. IDE
C. Sbus
D. EIDE
Answer: A
QUESTION 40
Which command is used to create a IPMP multipathing group?
A. ndd
B. in.mpathd
C. ifconfig
D. netstat
Answer: C
QUESTION 41
What needs to be installed on the system controller in order to receive Sun MC agent
support?
A. SUNWscscs
B. SUNWsccm
C. SUNWesscp
D. SUNWsspr
Answer: C
QUESTION 42
What format does smsbackup use to create its archive of files?
A. ufsdump
B. tar
C. cpio
D. zip
Answer: C
QUESTION 43
How is a blacklisted processor represented in the Physical View of a Sun Fire 15K
platform?
A. It is faded
B. It is crossed out
C. It is not shown
D. It is shadowed
Answer: C
QUESTION 44
If a request for memory or I/O has to go to another board set, what technology is used?
Answer: D
QUESTION 45
What is the maximum number of power supplies in the Sun Fire 15K?
A. 3
B. 4
C. 5
D. 6
Answer: D
QUESTION 46
Which group has the widest range of platform commands?
A. dmnadmn
B. platadmn
C. root
D. platsvc
Answer: B
QUESTION 47
What component can be flash updated?
A. Expander board
B. IO board
C. A domain
D. System board
Answer: D
QUESTION 48
With MaxCPU boards installed, what is the maximum number of processors in a 15K?
A. 72
B. 108
C. 140
D. 106
Answer: D
QUESTION 49
Which of the following is an advantage of using DR?
Answer: C
QUESTION 50
Which statement is true about Dynamic Reconfiguration?
Answer: D
QUESTION 51
What configuration control tasks are available to the platform service group? Select all
that apply.
A. Create ACLs
B. Display boards
C. Remove domain info
D. Rename domains
Answer: A,B
QUESTION 52
What file would contain information about unrecoverable domain errors?
A. pcd.log
B. dstop
C. rstop
D. esmd.log
Answer: B
QUESTION 53
What command must be run on an interface before performing a DR operation on the
system board?
A. in.mpathd -r hme0
B. if_mpadm -d hme0
C. in.mpathd -d hme0
D. if_mpadm -r hme0
Answer: B
QUESTION 54
Which process configures the platform hardware?
A. obp
B. esmd
C. hpost
D. power
Answer: C
QUESTION 55
Which of the following commands can not be accessed using Sun MC?
A. poweroff
B. connectsc
C. addtag
D. moveboard
Answer: B
QUESTION 56
Where are AXQ (Address Extender Queue) Chips located?
A. System Controller
B. Expander Board
C. System Board
D. Centerplane
Answer: B
QUESTION 57
What type of Sun Fire 15K server equipment is identified by the following string?
/SUNW,UltraSPARC III@1c2,0
A. memory
B. CPU
C. IO board
D. MaxCat
Answer: B
QUESTION 58
Which template is used when configuring NTP on a Sun Fire 15K server?
A. ntp.conf
B. ntp.client
C. ntp.nis
D. ntp.server
Answer: B
QUESTION 59
Which file contains a listing of all Sun MC users?
A. esadm.conf
B. esadmin.conf
C. esusers
D. esops
Answer: C
QUESTION 60
When preparing to DR detach a Slot 1 board from a domain, what must first be deleted
from the system?
A. Data files
B. Device links
C. Swap
D. Active partitions
Answer: C
QUESTION 61
What daemon is NOT started by the ssd daemon in the ssd_start?
A. dsmd
B. fomd
C. hwad
D. mld
Answer: D
QUESTION 62
What tty interface does Solaris use for a console from the domain?
A. b
B. c
C. a
D. d
Answer: C
QUESTION 63
What entity notifies the system controller when a domain panic occurs?
A. ssd
B. obp
C. pcd
D. esmd
Answer: B
QUESTION 64
What type of processor is on the CP1500 Board?
A. Ultra Sparc II
B. Ultra Sparc III
C. Ultra Sparc IIIi
D. Ultra Sparc IIi
Answer: D
QUESTION 65
What command will allow you to clear a device driver from memory?
A. prtioctl
B. psradm
C. modunload
D. pbind
Answer: C
QUESTION 66
In the following device path what defines this as IOC0?
/pci@5c,700000/pci@1/SUNW,isptwo@4/sd@5,0
A. pci@1
B. pci@5c
C. isptwo@4
D. 700000
Answer: B
QUESTION 67
Which daemon monitors domain status?
A. DSMD
B. dca
C. esmd
D. dxs
Answer: A
QUESTION 68
Which command would be used to display dynamic attachment points?
A. rcfgadm
B. dr
C. cfgadm
D. drshow
Answer: A
QUESTION 69
What command can be run from the system controller to add system board 5 to a
domain?
Answer: A
QUESTION 70
What is the command to update firmware on the Sun Fire 15K?
A. prom
B. cb_prom
C. flashupdate
D. upgrade_fw
Answer: C