Multilingual Version

English

Italiano

Franais

Espaol

Deutsch
 IR NETWORK CAMERA
SERIES

OPERATION GUIDE

Please read instructions thoroughly before operation and retain it for future reference.

m417a_317a_317b_217_operation_V1.4
 IMPORTANT SAFEGUARD

All lead-free products offered by the company comply with the requirements of the
European law on the Restriction of Hazardous Substances (RoHS) directive, which means
our manufacture processes and products are strictly lead-free and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product
must be collected separately at the product end-of-life. This applies to your product and
any peripherals marked with this symbol. Do not dispose of these products as unsorted
municipal waste. Contact your local dealer for procedures for recycling this equipment.

This apparatus is manufactured to comply with the radio interference requirements.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Any changes or modifications made to this equipment may void the users authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
All external cables connecting to this basic unit must be shielded.
For cables connecting to PCMCIA cards, see the option manual or installation instructions.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device mat not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.

Trademark Acknowledgements
iPad & iPhone are the registered trademarks of Apple Inc.
Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Microsoft, Windows & Internet Explorer are registered trademarks of Microsoft Corporation in the United
States and/or other countries.

Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume
any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of
this manual is subject to change without notice.

This product doesnt have a standby / off mode.

FW: 1021-1011-1017-1007
 MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (ii) DECODING
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.

GPL Licensing
This product contains codes which are developed by Third-Party-Companies and which
are subject to the GNU General Public License (GPL) or the GNU Lesser Public License
(LGPL).
The GPL Code used in this product is released without warranty and is subject to the
copyright of the corresponding author.
Further source codes which are subject to the GPL-licenses are available upon request.
We are pleased to provide our modifications to the Linux Kernel, as well as a few new
commands, and some tools to get you into the code. The codes are provided on the FTP
site, and please download them from the following site or you can refer to your distributor:
http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz

FW: 1021-1011-1017-1007
 TABLE OF CONTENTS
1. OVERVIEW......................................................................................................................................... 1
1.1 Product Features....................................................................................................................................... 1
1.2 Package Content....................................................................................................................................... 1
1.3 Product Overview ...................................................................................................................................... 1
1.4 Rear Panel ................................................................................................................................................ 1
1.5 External I/O Port........................................................................................................................................ 2
1.6 Status Indicator.......................................................................................................................................... 2
2. CAMERA ACCESS WITH INTERNET EXPLORER............................................................................ 3
2.1 Camera Login............................................................................................................................................ 3
2.2 Control Panel Overview ............................................................................................................................ 3
2.3 Digital PTZ (DPTZ) Operations (Megapixel Models Only) ........................................................................ 5
2.4 Event Record Search & Playback ............................................................................................................. 6
3. CAMERA CONFIGURATIONS............................................................................................................ 7
3.1 System configuration menu....................................................................................................................... 7
3.2 Network ..................................................................................................................................................... 8
3.2.1 Network ............................................................................................................................................................8
3.2.2 QoS ..................................................................................................................................................................8
3.2.3 DDNS ...............................................................................................................................................................8
3.2.4 SNTP................................................................................................................................................................9
3.2.5 FTP...................................................................................................................................................................9
3.2.6 MAIL .................................................................................................................................................................9
3.2.7 SMS................................................................................................................................................................10
3.2.8 Filter ............................................................................................................................................................... 11
3.2.9 UPnP / Bonjour............................................................................................................................................... 11
3.2.10 RTP ..............................................................................................................................................................12
3.3 Camera ................................................................................................................................................... 13
3.3.1 Camera...........................................................................................................................................................13
3.3.2 Video ..............................................................................................................................................................13
3.3.3 Color...............................................................................................................................................................14
3.3.4 Audio ..............................................................................................................................................................14
3.3.5 Advance..........................................................................................................................................................14
3.4 Record..................................................................................................................................................... 15
3.4.1 Record............................................................................................................................................................15
3.4.2 Record Timer..................................................................................................................................................15
3.5 Storage.................................................................................................................................................... 15
3.5.1 Memory ..........................................................................................................................................................15
3.6 Trigger ..................................................................................................................................................... 15
3.6.1 Trigger ............................................................................................................................................................16
3.7 General ................................................................................................................................................... 17
3.7.1 General...........................................................................................................................................................17
3.7.2 Time................................................................................................................................................................18
3.7.3 Server Log......................................................................................................................................................18
3.7.4 Online .............................................................................................................................................................19
3.7.5 Account...........................................................................................................................................................19
3.7.6 Google Maps ..................................................................................................................................................20
3.7.7 Maintenance...................................................................................................................................................20
APPENDIX 1 PRODUCT SPECIFICATIONS........................................................................................ 22
APPENDIX 2 BIT RATE TABLE FOR REFERENCE ............................................................................ 23
APPENDIX 3 POE CONNECTION (Megapixel Models Only)............................................................... 26
APPENDIX 4 API ID APPLICATION FOR SMS MESSAGING.............................................................. 27
APPENDIX 5 Q&A ................................................................................................................................ 29
APPENDIX 6 RECORDING TIME TABLE ............................................................................................ 30
1. OVERVIEW

1.1 Product Features

Easy network setup with your iPhone / iPad
ONVIF standard supported to simplify system integration
External alarm I/O device connection
Microphone & speaker built-in for audio transmission
Remote Surveillance
-- Fully compatibility on iPhone & iPad, and Internet Explorer on Windows operating system
(Megapixel Models Only) POE (Power-over-Ethernet) support to eliminate the use of power cables and reduce installation
costs
(2 Megapixel Model Only) 2 Megapixel SONY sensor with HDTV 1080p quality, allowing users to notice minor details more
easily
(1.3 Megapixel Model Only) 1.3 Megapixel SONY sensor with HDTV 720p quality, allowing users to notice minor details more
easily

1.2 Package Content

Network camera Camera Bracket 3-pin Terminal
Quick Setup with iPhone / iPad Adapter (Optional)

1.3 Product Overview

1.4 Rear Panel

Ethernet: Connect a RJ45 network cable.

Power: Connect the regulated power supply.

RESET: With the power connected, press to reset all parameters, including the IP address to factory default
settings.
The camera will reboot after default reset. Please do not disconnect your camera during the reset
process.

Alarm I/O: A 3-pin I/O terminal is supplied with the camera for external alarm device connection. For details,
please refer to 1.5 External I/O Port at page 2.

Status Indicator is the indicator for LAN connection, and is the indicator for Internet connection. For
details, please refer to 1.6 Status Indicator at page 2.

1
1.5 External I/O Port

This camera supports external I/O device connection, and a 3-pin I/O terminal is supplied with this camera for
easy connection.

Below shows which input on the I/O terminal you should use for wiring when you want to connect an external
device to this camera.

3-pin I/O Terminal Alarm Out Connection

1.6 Status Indicator

ICON
LAN connection status Internet connection status
System Status
During powering on Always on Always on
Blinking (on 250 ms, off 250 ms) Always off
Reset default

Blinking (on 250 ms, off 250 ms) Blinking (on 250 ms, off 250 ms)
Upgrade

Connection Status
LAN connected Always on --
Blinking (on 100 ms, off 500 ms) --
LAN disconnected

Internet connected -- Always on
Blinking (on 100 ms, off 500 ms)
Internet disconnected --

3G Connection Error on
iPhone / iPad / Android Mobile Device
Blinking
3G Connection Setting --
(on 5 sec, off 0.5 sec, on 0.5 sec, off 0.5 sec, on 5 sec)
Uncompleted
--
* LED blinking frequency - LED on / LED off

2
2. CAMERA ACCESS WITH INTERNET EXPLORER

This network camera can be accessed via Microsoft Internet Explorer and iPhone / iPad / Android mobile devices
with our self-developed program EagleEyes installed depending on different using situations.

Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please
refer to http://www.eagleeyescctv.com.

Before using the camera, make sure you have configured the network settings, and the network connection is fine.

For network configurations, please refer to:

Quick Setup With iPhone / iPad supplied with your camera if youre using iPhone / iPad, and your network
environment is wireless.
ADVANCED NETWORK SETUP downloadable from www.surveillance-download.com/user/m317a.swf if your
network environment is not wireless.

2.1 Camera Login

Step1: Open your web browser, and key in http://ipaddress:portnum in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in http://60.121.46.236:888 into
the URL address box, and press Enter.

Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click LOGIN.
Step3: The wizard is then started.
To skip the wizard and directly access the camera live view, click Close.
To directly access the camera live view without starting the wizard for the login next time, check Do not start wizard at login.

Note: If youre prompted to install VLC player, Software or H264 Streaming Viewer, please agree
to proceed the installation. Or, you might not be able to see the live view properly.
Step5: When the login is successful, the live view is shown.

2.2 Control Panel Overview

Note: The buttons available depend on the model number used and the user level used to log in.

3
Function Icon User Level Description
Supervisor / Power User
Live Switch to the live view page.
/ Normal User / Guest
Enter the event record list for video playback.
Backup Supervisor / Power User For details, please refer to 2.4 Event Record Search & Playback at page
6.
Switch to the DPTZ configuration page.
Supervisor / Power User
DPTZ* For details, please refer to 2.3 Digital PTZ (DPTZ) Operations
/ Normal User
(Megapixel Models Only) at page 5.
Switch to the system configuration page, and the functions available for
Config. Supervisor Supervisor and Power User are different.
For details, please refer to 3.1 System configuration menu at page 7.
Media Type -- Supervisor / Power User Select the image player from the drop-down list:
/ Normal User / Guest H.264 / MPEG-4 / Motion JPEG
QuickTime
QuickTime is Apple Inc.s multimedia software. You need to have
QuickTime installed in your operating system before selecting QuickTime.
When it is selected, you will be promoted to enter the user name and
password to access the camera.
VLC

Quality -- Supervisor / Power User Click & drag the slider to select the video quality:
/ Normal User Basic / Normal / High / Best.
Video Resolution -- Supervisor / Power User Select the image resolution from the drop list:
/ Normal User 2 Megapixel Model 1.3 Megapixel Model D1 Model
HD1080P (1920 x 1080) SXGA (1280 x 1024) D1 (720 x 480)
HD720P (1280 x 720) HD720P (1280 x 720) CIF (352 x 240)
VGA (640 x 480) VGA (640 x 480) CIF (352 x 240)
QVGA (320 x 240) QVGA (320 x 240)

Supervisor / Power User

Live View Size:
/ Normal User
Click to display the image in full screen.
To exit the full screen mode, press Esc on your keyboard.
Full Screen
This icon appears only when the selected resolution is HD1080P, SXGA,
HD720P, VGA or D1.

The QVGA resolution is resized to fit into the current live view size.
Double size
This icon appears only when the selected resolution is QVGA or CIF.

The current live view size is the same as the selected resolution.
Normal Size This icon appear only when the selected resolution is SXGA or HD720P or
HD1080P.

The selected resolution is resized to fit into the current live view size.
Fit to screen This icon appear only when the selected resolution is SXGA or HD720P or
HD1080P.

Click and hold the movable square on the left bottom corner of the live
view to move
No Scale
This icon appear only when the selected resolution is SXGA or HD720P or
HD1080P.

Supervisor / Power User Click to take a snapshot of the current view on a new window. Right
Snapshot
/ Normal User click on the picture and re-save it to the location you want.
Supervisor / Power User
Audio On / Off / Click to switch the audio-in on / off.
/ Normal User
Click to force your alarm-out device to work. For example, when your
Supervisor / Power User
Alarm Out alarm device is a buzzer, click this button and your buzzer will start to
/ Normal User
sound even if theres no alarm event.

Microphone / Supervisor Click to switch the audio-out on / off.

4
2.3 Digital PTZ (DPTZ) Operations (Megapixel Models Only)

This camera has PTZ capability, i.e. digital PTZ (hereafter called DPTZ), for wide area monitoring.

STEP1: Click DPTZ to show the DPTZ control panel.

STEP2: Select the functions when needed:

FUNCTION ICON DESCRIPTION

Resolution -- Select the video resolution for the DPTZ function. Only VGA and QVGA are available.

Click to take a snapshot of the current view on a new window. Right click on the picture and re-save it to the
Take snapshots
location you want.
/
Audio On / Off Click to switch the audio-in on / off.

Click to force your alarm-out device to work. For example, when your alarm device is a buzzer, click this button
Alarm Out
and your buzzer will start to sound even if theres no alarm event.

/ Click to switch the audio-out on / off.

Microphone
Available only when youre a Supervisor.

5
2.4 Event Record Search & Playback

This camera can only save up to three alarm recordings.

Note: To save more recorded data, its recommended to use this camera with the compatible NVR.

Click to jump to the next / previous time interval in an hour, for example, 11:00 ~ 12:00 or 14:00
/ Previous / Next Hour
~ 15:00, and start playing the earliest event video clip recorded during this whole hour.
Fast Forward Increase the speed for fast forward. Click to get 2X, 4X, 8X & 16X speed forward eventually.
Fast Rewind Increase the speed for fast rewind. Click to get 2X, 4X, 8X & 16X speed rewind eventually.
Play Click to play the current video clip.

Pause Click to pause the video playback.

Stop Click to stop the video playback.

In the pause mode, click to get one frame forward.

Step

Audio Click to mute the playback if necessary, and click again to restore.
Click to download the current video clip to the specified path in your PC.
Download The downloaded video can only be opened by our own video player. Please go to General Maintenance to
download the video player, or get the player from the CD supplied with the sales package.

6
3. CAMERA CONFIGURATIONS

Users can further configure this network camera by accessing via Internet Explorer.

3.1 System configuration menu

Click Config. to enter the configuration page.
The functions are categorized into six menus: Network, Camera, Record Timer, Storage, Trigger and General.
For details about Network, please refer to 3.2 Network at page 8.
For details about Camera, please refer to 3.3 Camera at page 12.
For details about Record, please refer to 3.4 Record at page 15.
For details about Storage, please refer to 3.5 Storage at page 15.
For details about Trigger, please refer to 3.6 Trigger at page 15.
For details about General, please refer to 3.7 General at page 17.

Main Menu Sub-Menu Reference

Network Network Configure network settings.

QoS Limit the data flow for live streaming.

DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
Enter the FTP information for event notifications when FTP is chosen in Trigger
FTP
Trigger.
Mail Enter Email information for event notifications when Email is chosen in Trigger Trigger.
Enter text messaging information for SMS notifications when SMS is chosen in Trigger
SMS
Trigger.
Filter Choose to permit or block the IP address(es) which can access this camera.

*Suitable for Windows-based operating system.

UPnP Allow this camera to be detected among devices within the same network area for easy and
quick usage.

*Suitable for Apple Mac-based operating system.

Bonjour Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Set the parameters for video data transmission when youre using multimedia other than web
RTP
broswers and Video Viewer for remote access.
1. Rename the camera.
Camera Camera
2. Change the place where the camera name is shown on the screen.
Video Adjust video-related settings in different video format.
Color Adjust the color performance.
Audio Adjust the audio volume of the microphone and speaker.
Advance Adjust the camera parameters if necessary.
Record Record Configure the record function.
Record Timer Schedule external alarm recording.
Storage Memory Check the current storage capacity and clear all recorded data when needed.

7
 Main Menu Sub-Menu Reference
1. Enable / disable motion and alarm detection.
Trigger Trigger 2. Set the motion detection area.
3. Configure how the camera reacts for any event.
1. Select the language of the web browser.
General General 2. Check the MAC address of the camera.
3. Lock camera access after the specified time.
Time Set daylight saving time and the current time.
Server Log Check the system event logs.
Online Check the current online user(s).
1. Create a new user account with different access privilege.
Account
2. Modify or delete an existing user account.
Google Maps Allow you to know where the network camera is.
1. Check the current firmware version and upgrade your camera.
2. Copy system configurations.
Maintenance
3. Reboot the camera.
4. Download the video player to play the recorded data.

3.2 Network

3.2.1 Network
You can set the network configuration of the network camera depending on your network type.
For details, please refer to Advanced Network Setup from www.surveillance-download.com/user/m317a.swf.

3.2.2 QoS
QoS, Quality of Service, is the ability to control the data flow for real-time streaming. This function is important if
your network bandwidth is insufficient and you have other devices to share the network bandwidth.
Check QoS Enable, and set the max. upload rate from 256 to 10240 kbps.

3.2.3 DDNS
Select On when the selected network type in Network is PPPOE or DHCP.
For details, please refer to Advanced Network Setup from www.surveillance-download.com/user/m317a.swf.

8
3.2.4 SNTP
SNTP (Simple Network Time Protocol) is used to synchronize your camera time with the networked computer
systems.

Function Description
GMT Once users choose the time zone, the network camera will adjust the local area time of the system automatically.

NTP Server Simply use the default SNTP server (For example, tock.stdtime.gov.tw) or change to another server with which users are
familiar.

Sync. Period Select Daily to synchronize the camera time with the network time every day or None to turn off this function.

Sync Click and the network camera will synchronize the time with the network time.

3.2.5 FTP
Enter the detailed FTP information and click Save to confirm. The information you set here will be applied
when FTP is selected in Trigger Trigger.

3.2.6 MAIL
Enter the detailed e-mail information and click Save to confirm. The information you set here will be applied
when Email is selected in Trigger Trigger.

Function Description
SMTP Server Enter the SMTP server address provided from your e-mail system supplier.

Port Enter the port number provided from your e-mail system supplier. If this column is left blank, the e-mail server will use
port 25 to send e-mails.

Mail From Enter the name of the sender.

SSL Encryption Select Yes if your e-mail server is using SSL encryption to protect your e-mail content from unauthorized access.

Verify Password Some mail servers are required to verify the password. Please enter the user name and password.

E-Mail Address List Add the e-mail address(s) of the assigned recipient(s).

Test When all information is entered, click Test Mail to try if the receipt.

9
 3.2.7 SMS

Note: Before using this function, you need to apply an API ID from the mobile messaging company,
Clickatell, and you will be charged starting from the 11th message. For details, please refer to
APPENDIX 4 API ID APPLICATION FOR SMS MESSAGING at page 27.

Enter the detailed information needed for text messaging, and click Save to confirm. The information you set
here will be applied when SMS is selected in General "Trigger".

Function Description
System The text messaging service provider is Clickatell.

User name / Password Enter the account user name and password you created in Clickatell.

API ID Enter the API ID you applied from Clickatell.

Recipient Click Add to enter the phone number, including the country code, to receive the text
message. Five sets of phone numbers are allowed.

Transfer Interval Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.

Reset Counter Click to restart the text messaging, and the SMS will be sent after the specified time interval
since you click this button.

Message Enter the text content (up to 70 characters) you want to send with the text message.

Test To know whether your SMS setting is correct, click this button to immediately send a SMS to
your phone.
Note: This testing is not free and you will be charged for SMS sending base on your
local rate.

10
3.2.8 Filter
Choose to permit or block the IP address(es) which can access this camera, and click Save to confirm.

Function Description
Filter Configuration
Error Count Set the maximum count for login failure. When the maximum count is reached, the IP address trying to access the
network camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Echo Request Select Non-Block to allow other users to use the ping command to detect the IP address of your network camera, or
Block to deny the ping command request.
IP/MAC Filter Configuration
IP/MAC Filter Choose to enable or disable the filter function.
IP/MAC Filter Policy If Enable is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list below.
IP/MAC Filter Rules
Rule To add an item to the IP address list, key in the IP address in Rule, and click Add.
To remove an existing item in the IP address list, click the item you want to remove, and click Delete.

3.2.9 UPnP / Bonjour

UPnP stands for Universal Plug and Play, which allows devices to connect seamlessly in the home and
corporate environments and simplify installation of computer components, and is only suitable for Microsoft
Windows-based operating system.

Bonjour functions the same as UPnP, but its only suitable for Apple Mac-based operating system.

UPnP

Bonjour

Check Enable to allow the network camera to be detected among devices within the same network area, and
set the identification name of the camera in Friendly name.

When this function is activated, the other PC within the same domain as this camera will be able to search this
camera in:
Network Neighbor with the identification name set in Friendly name for Windows-based PC, or
(finder) or Bookmark with the identification name set in Device Name for Mac-based PC.

11
 Double-click it to quickly open the web browser for camera access.

Port Mapping (Available only in UPnP)

This function can eliminate the need to additionally access the router for port forwarding.
For details, please refer to Advanced Network Setup from www.surveillance-download.com/user/m317a.swf.
Note: Before using this function, make sure your router supports UPnP, and this function is enabled. If
not, please access your router additionally for port forwarding.
When Port Mapping is set to Enable, the system will automatically assign an IP address or port number for
you if no IP address or port number is entered.

Note: When the configurations are saved successfully, youll see a message indicating the IP address
and port number assigned to this network camera.

3.2.10 RTP
The Real-time Transport Protocol (RTP) is an Internet protocol standard to manage the real-time transmission of
multimedia, such as VLC player.

The media player you want to use for remote access must support RTP transmission for this function to work
normally.

Note: When youre about to end the remote access, please press the stop button on your media player
first, and then close the program. This is to ensure the server receives the stop command, and
also help to protect the server from redundant data transmission.

12
 Function Description
Port Range
The port range used by RTP is limited, and preserving 100 ports between the start port and end port is necessary.
Start Port The range of the start port is 1024 ~ 65434.
End Port The range of the end port is 1124 ~ 65534.
Multicast
Address and port for Set a specific address and port for multicast of each stream format (H264/ MPEG4/ JPEG).
H264 / MPEG4 / The range of the address is limited between 224.0.0.1 ~ 239.255.255.255.
JPEG transmission
The port for multicast must be an even number.
Address and port for Set a specific address and port for multicast of audio.
audio transmission The range of the address is limited between 224.0.0.1 ~ 239.255.255.255.
The port for multicast must be an even number.
Time to Live (TTL) The range of Time to Live of the package is between 1 ~ 255. As soon as Time to Live of the
package is 0, it will be dropped.

3.3 Camera

3.3.1 Camera
Rename the camera, and change the place where the camera name is shown on the screen, UP-LEFT /
UP-RIGHT / DOWN-LEFT / DOWN-RIGHT.

3.3.2 Video
Adjust video-related settings in different video format.
Quality is related to image clearness.
FPS is related to the fluency of the video. The more the FPS, the more fluent the video.
Max Bit Rate is the maximum limitation of data transmission in the selected image format and resolution.

Take the 2 megapixel model as an example below. For the 1.3 megapixel model and D1 model, please refer to
its actual display.
Note: QQVGA is for mobile surveillance only.

13
3.3.3 Color
Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the slider to preview
the color change on the right side of ths page and adjust the image color.

To restore the default values, click Back to Default.

3.3.4 Audio
Drag the slider to adjust the volume of the microphone and speaker.

3.3.5 Advance
Adjust the camera parameters if necessary.
Megapixel Models D1 Model

Item Description
Shutter Speed* Set the shutter speed based on your need.
The options are: Up to 1/10 sec, Up to 1/30, Up to 1/15, Up to1/6, Up to 1 and Up to 2.
Back Light** It is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light.
The image will be properly exposed for clearness. Select to activate (ON) or disable (OFF) this function.
Note: This function is available only in the day mode.
Mirror Select ON to rotate the images horizontally based on your installation situation when necessary.
Flip Select ON to rotate the image 180 when necessary.
De-noise* Click and drag the slider to adjust the level from 0 ~ 10 to decrease the noise shown in the dark environment.
IR Control Select Auto to automatically enable IR LEDs at night or in the dark environment, On to always enable IR LEDs, or OFF
to disable this function.
White Balance* Process the current image to retain color balance over a color temperature range.
The options are: Auto, Incandescent Light, Cool Light, sun Light, Cloudy & Sun Shade.
Sharpness Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the edges in the pictures.
Hold and drag the slider to adjust the level of sharpness from 0 ~ 100. The higher the value, the sharper the image.
* Megapixel Models Only **D1 Model Only

14
3.4 Record

3.4.1 Record
In Record Configuration, you can:
Enable or disable the alarm record function. When Enable is set to No, the alarm record function is
disabled even if you enable it in other configuration pages.
Select if the data should be overwritten when the memory storage is full.
Enable or disable the audio record function.
Select the video resolution for event recording.
Note: The higher resolution you choose, the more accuracy and higher image quality the recording will
be, but the faster the memory storage is consumed and become full.

3.4.2 Record Timer

To schedule alarm recording, enable it, and select the day and time for recording.
Note: The timer must be enabled for the record function to work properly.

3.5 Storage

3.5.1 Memory
In Memory, you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note: The recorded data will be removed also when you reset or reboot this camera.

Note: To save more recorded data, its recommended to use this camera with the compatible NVR.

Note: To know the total recording time per recording resolution, please refer to APPENDIX 6
RECORDING TIME TABLE at page 30.

The total capacity for recording may vary depending on different models. Please check the actual display of your
model.

15
3.6 Trigger

3.6.1 Trigger
You can configure how this camera reacts when theres an alarm or motion event.

Detect

Item Description
External Alarm Enable or disable detection from external alarm-in device, and click the title External Alarm (in blue) to set N.O.
or N.C. depending on the configuration of your alarm-in device.
Motion Enable or disable motion detection.
Motion detection is not supported when the stream format is Motion JPEG.

When Enable is selected, click Detection to enter the motion detection area setting page as follows:

Sensitivity:

Set the detection sensitivity from the drop-down list: High, Normal or Low.

Area Setting:

Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being
detected while the transparent grids are the area under detection. You can set multiple areas under detection.
Click Clear All to set the whole area undetected.
Click Select All to set the whole area under detection.

Duration Set the duration time for trigger recording (5 / 10 / 20 / 40 seconds).

16
 Action

Here defines how the camera delivers alerts to you for any event.

Item Description
E-Mail Select the event type you want to receive E-mail notifications when it occurs.
Then, click the title E-Mail (in blue) to configure the media type (H264 / JPEG / MPEG4), file format (AVC / AVI),
and record time (1 ~ 5 seconds) for the event video clip.
The camera will send the captured video clip to the E-mail address(s) you assigned in Network Mail once the
selected event type occurs.
FTP Select the event type you want to receive FTP notifications when it occurs.
Then, click the title FTP (in blue) to configure the media type (H264 / JPEG / MPEG4), file format (AVC / AVI), and
record time (1 ~ 5 seconds) for the event video clip.
The camera will upload the captured video clip to the FTP site you assigned in Network FTP once the
selected event type occurs.
SMS Select the event type you want to receive a text message when it occurs.
The camera will send a text message to the mobile phone number you assigned in Network SMS once the
selected event type occurs.
Alarm Out Select the event type you want to trigger the alarm-out device to work when it occurs.

Then, click the title Alarm Out (in blue) to configure the trigger rule (LOW / HIGH).
Record Select the event type you want to enable event recording when it occurs.
Audio Alert Select the event type you want to enable audio alert when it occurs.

3.7 General

3.7.1 General
To change the language of UI interface, select from the drop-down list in Language.
To allow the status LED indicators to show the status as indicated in 1.6 Status Indicator at page 2, select
Enable in Status LED Mode; to hide the status, select OFF; to only show the error status, select Temporary
Disable.
Note: The status LED mode will be restored to Enable after camera reboot when Temporary OFF is
selected.
To lock camera access when its not used after the specified time, select 5 MIN, 15 MIN or 30 MIN from the
drop-down list of Auto Lock Time, or select NEVER to disable this function.
Note: When the camera access is locked after the specified time, to resume camera access, please
enter the password.

17
3.7.2 Time
Set daylight saving time and the current time, and click Save to confirm.

Function Description
Time Configuration
Date Set the current date.

Time Set the current time.

Daylight Saving Time Configuration

Daylight Saving Time Specify whether to use daylight saving time (Enable / Disable).

If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).

3.7.3 Server Log

To quickly search the system logs you want by event type, click Prev. Page or Next Page to find the logs you
want, or check the event type(s) and click Reload to start searching.

To clear all system event logs, click Clear All.

18
 3.7.4 Online
You can check the current online user(s) with respective online information. To refresh the list, click Reload.
To allow anonymous login, select Enable in Anonymous Viewer Login.
To disable image code verification at login, select No in Login with CAPTCHA Image.

3.7.5 Account
You can create a new account with different user access privilege, or delete or modify an existing account
setting.

How to create a new account

Step1: Click New, and fill in the following columns.

Column Description

User Name Set a user name that will be used for camera access. The user name allows up to 16 alphanumeric characters.

Password Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters.

Confirm Password Enter the password again to confirm.

User Level Set the security level of an account to give the permission to control different functions. There are four user levels:
SUPERVISOR, POWER USER, NORMAL USER and GUEST.

Life Time Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)

Step2: Then, click Save to save your setting and create a new account.

How to modify or delete an existing account

Step1: Select the account you want to modify or delete.

Step2: To modify the account, click Edit to change the settings, and click Save.
To remove the account, click Delete.

Note: Its not allowed to remove an account when theres only one account in the account list.

19
 3.7.6 Google Maps
This function is used to let you know where the network camera is.

The system will prompt you to apply a Goole Maps Key if your access is denied. Please follow the instructions
below when youre denied:

Step1: Click Sign up for a Google Maps key to enter the application page.

Step2: Check the terms and conditions, and enter the IP address of the network camera. Then, click Generate
API Key.

Step3: Copy the generated API key, and click Update Google Maps Key on the web browser to paste it.

3.7.7 Maintenance
Firmware Upgrade
This function is used when users need to upgrade the camera for function scalability.

Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.

Note: The event videos saved in the camera will be removed after firmware upgrade. Make sure youve
copied important events to your PC before firmware upgrade.

Step1: Select to browse to where you save the upgrade files, and select them one by one until all files are
selected (up to four files).

20
 Step2: Select Upgrade to start system upgrading.

Note: Youll be prompted to keep current configurations. Its recommended to keep them, or all
configurations will be restored to default values after upgrade.

Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during
firmware upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.

System Configuration Backup

This function is used to copy your system configuration to a System.bin file.

You may import the same system configuration to another camera, or restore your system configuration when
the camera is reset to default values.

Select System.bin in Firmware Upgrade, and select Upgrade to import the system configuration.

System Reboot
Select Reboot to restart your camera if needed.

Player Download
To see the event video clips downloaded to your PC, you need to first install our own video player in your PC.
Select Free Download to download the video player, and double click the file to install it.

21
 APPENDIX 1 PRODUCT SPECIFICATIONS

Model 2 Megapixel 1.3 Megapixel D1

Network
Network Compression H.264 / MPEG4 / MJPEG
Multiple Video Streaming
3 (H.264, MJPEG, MPEG4)
(Encode Modes, IPS, Resolution)
LAN Port YES
LAN Speed 10/100 Based-T Ethernet
DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP,
Supported Protocols
HTTP, RTP, RTSP, RTCP,IPv4, Bonjour, UPnP, DNS,UDP,IGMP, QoS
Frame Rate 30 FPS
Number of Online Users 10
1. Multiple user access levels with password
Security 2. IP address filtering
3. Digest authentication
1. Internet Explorer on Windows operating system
Remote Access
2. EagleEyes on iPhone, iPad and Android mobile devices
ONVIF Compatible YES
Camera
1/2.9" SONY CMOS image 1/4" SONY H.R. image
Image Sensor 1/3 H.R. image sensor
sensor sensor
HD1080P / HD720P / SXGA / HD720P / VGA /
Video Resolution D1 / CIF
VGA / QVGA / QQVGA*** QVGA
Min Illumination 0.1 Lux / F1.5, 0 Lux (IR LED ON)
1 / 60 (1/50) to 1 / 100,000
Shutter Speed --
sec.
S/N Ratio More than 48dB (AGC off)
Lens f3.8mm / F1.5
Viewing Angle 83.2(Diagonal) 62.7(Diagonal) 80.4(Diagonal)
IR LED 12 units (10 meters)
IR Shifter YES
White Balance ATW
AGC Auto
IRIS Mode AES
External Alarm I/O YES
POE YES (IEEE 802.3af) NO
Microphone YES
Speaker YES
Power Source (10%) 12V / 1A 12V / 1A 5V / 1A 5V / 1A
Operating Temperature 0~40
Others
Mobile Surveillance iPad, iPhone & Android
Audio Detection YES
RTC (real-time clock) YES
Motion Detection YES
Digital Pan / Tilt / Zoom YES NO
Event Notification FTP / Email / SMS
Pentium 4 CPU 1.3 GHz or higher, or equivalent AMD
256 MB RAM
Minimum Web Browsing Requirements AGP graphics card, Direct Draw, 32MB RAM
Windows 7, Vista & XP, DirectX 9.0 or later
Internet Explorer 7.x or later
* The specifications are subject to change without notice.
** Dimensional tolerance: 5mm
*** QQVGA is for mobile surveillance only

22
APPENDIX 2 BIT RATE TABLE FOR REFERENCE

The data below is for reference only.

The bit rates listed here may vary depending on the resolution, image quality & frame rate you choose, the
complexity of your monitoring area, and how often the moving objects show in your monitoring area.

Megapixel Models

Testing Environment
Place: Office Entrance
Network translation: H.264
Camera type: Megapixel camera

Static: No one coming in and out Dynamic: One or two people coming in and out

Resolution Quality Frame Rate (Dynamic) kbps (Static) kbps

SXGA Best FULL 3253 3216
High 2375 2160
Normal 1571 1266
Basic 1465 873
VGA Best 2010 1261
High 1042 1034
Normal 685 572
Basic 457 350
QVGA Best 646 366
High 482 350
Normal 302 286
Basic 168 161
SXGA Best 1/4 1163 1076
High 989 715
Normal 855 534
Basic 719 443
VGA Best 789 571
High 451 447
Normal 349 237
Basic 217 165
QVGA Best 269 147
High 182 131
Normal 164 113
Basic 97 71

23
Resolution Quality Frame Rate (Dynamic) kbps (Static) kbps
SXGA Best 1/15 581 374
High 405 342
Normal 487 248
Basic 337 141
VGA Best 358 79
High 201 63
Normal 180 28
Basic 92 15
QVGA Best 111 84
High 99 68
Normal 97 54
Basic 58 42

24
 D1 Model

Testing Environment
Place: Office Entrance
Network translation: H.264

Static: No one coming in and out Dynamic: One or two people coming in and out

Resolution Quality Frame Rate (Dynamic) kbps (Static) kbps

D1 Best FULL 2786 1546
High 1375 705
Normal 1234 425
Basic 441 245
CIF Best 955 290
High 364 171
Normal 328 111
Basic 161 68
D1 Best 1/5 935 474
High 506 272
Normal 297 175
Basic 223 108
CIF Best 222 109
High 133 67
Normal 81 49
Basic 71 32
D1 Best 1/30 127 70
High 197 20
Normal 61 11
Basic 50 4
CIF Best 42 7
High 38 2
Normal 22 1
Basic 28 0

25
APPENDIX 3 POE CONNECTION (Megapixel Models Only)

This device supports PoE (Power-over-Ethernet), developed by the IEEE802.3af task force, and power can be
supplied over the same network (Ethernet) cable as the one used to connect to Internet. No power cable is needed.
Below shows two examples of POE application for reference.

When your router / hub supports POE connection

When your router / hub doesnt support POE connection (An optional POE connected required)

26
APPENDIX 4 API ID APPLICATION FOR SMS MESSAGING

To allow the camera automatically sending a text message when an event happens, you need to
apply an API ID from Clickatell, one mobile messaging company, first.

Note: The SMS messaging is not totally free. You will be charged starting from the 11th
message.

Please follow the steps below for application.

Step1: Go to http://www.clickatell.com/login.php. In New Customers, select Clickatell Central

(API) from the drop-down list.

Step2: Fill in your information to create an account, and click CONTINUE.

Note: Note down the user name and password, and the mobile phone number you
specified here for SMS notification setting later.

Step2: When the account is created, the system will automatically send an Email to your specified
Email address and ask you to activate your account.
27
 Click the link in the Email to complete account activation, and enter the login page as follows.
Enter the password you set, and click Login.

Step3: Enter the mobile phone number (including your country code) you want the text message to
be sent, and click SEND ACTIVATION CODE. The system will send an activation code to
that number for verification.
Check if you receive a text message from Clickatell.

Step4: Go back to Clickatell, and click the tab Manage my Products.

Then, select HTTP from the drop-down list My Connections.

Step5: In Add HTTP API, enter a descriptive name for this service, and make sure the dial prefix is
correct and callback type is HTTP GET. Then, click Submit.

Step5: You will get an API ID as follows.

Note: Note down the API ID for SMS notification setting later.

28
APPENDIX 5 Q&A

For more details about EagleEyes Q&A, please visit our official website: www.eagleeyescctv.com/supp_QnA.aspx.

Question Answer

I can connect to this camera in my house You didnt configure this camera to Internet, but only in LAN.
or office where its installed with wireless Please follow the steps in the advanced network setup guide
network. downloadable from www.surveillance-download.com/user/m317a.swf
But when I leave my house or office, I to complete network configurations, or its recommended for you to
cant connect to it from my mobile phone check with your local installer or reseller for this service because its
(with 3G network), or other PC usually hard for a person who doesnt have network knowledge to set
(connected to Internet). Why? network configurations.

Image fluency could be affected by the local network upload

bandwidth, router efficiency, client network download bandwidth,
complexity of live view, and more.
My live images are not fluent. Why? (Recommended) To have the best image fluency, select QVGA; to
have the best image quality, select HD1080P or SXVGA based on
the model you have; to have normal image fluency and quality, select
VGA.

My image is vague. Why? The camera might lose its focus. Please rotate the lens to adjust.

Please try adjusting the power line frequency to 60 Hz or 50 Hz for

the camera.
For iPhone users, access the camera, and select on the top
The live video keeps flickering. Why? right corner to enter IPCAM Configuration page. Then, go to Advance
Setup Camera to change setting.
For access from Internet Explorer, log into the camera, and select
Config. Camera Video.

29
APPENDIX 6 RECORDING TIME TABLE

Below shows the estimated total recording time for each recording resolution.

The recording time per resolution is the average value collected from the both alarm trigger conditions indicated in
Testing Environment, and is for reference only.

The time may vary depending on the resolution, image quality & frame rate you choose, the complexity of your
monitoring area, and how often the moving objects show in your monitoring area.

Testing Environment
Place: Office
Monitoring area: 1.5 meters away from the camera
Alarm trigger conditions:
(1) One person walks by the monitoring area and leaves immediately.
(2) Two persons walk by the monitoring area. One goes away immediately, and the other one stays a while and
goes away.

RecordingResolution SXGA VGA QVGA

Recordingtime(second) 25 115 211

30


Chinese_m417a_317a_317b_217_operation_V1.4


(Restriction of Hazardous
Substances, (RoHS))

FCC (Federal Communications Commission)

This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Any changes or modifications made to this equipment may void the users authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device mat not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
All external cables connecting to this basic unit must be shielded.
For cables connecting to PCMCIA cards, see the option manual or installation instructions.

iPadiPhone Apple Inc.

Android Google Inc. Google Permissions
MicrosoftWindows Internet Explorer Microsoft Corporation /
Opera Opera Software

FW: 1021-1011-1017-1007
 MPEG-4

THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (ii) DECODING
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG4 VIDEO.NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE.ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.SEE
HTTP://WWW.MPEGLA.COM.

GPL

This product contains codes which are developed by Third-Party-Companies and which
are subject to the GNU General Public License (GPL) or the GNU Lesser Public
License (LGPL).
The GPL Code used in this product is released without warranty and is subject to the
copyright of the corresponding author.
Further source codes which are subject to the GPL-licenses are available upon request.
We are pleased to provide our modifications to the Linux Kernel, as well as a few new
commands, and some tools to get you into the code.The codes are provided on the FTP
site, and please download them from the following site or you can refer to your
distributor:
http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz

FW: 1021-1011-1017-1007

1. ............................................................................................................................................. 1
1.1 .................................................................................................................................................... 1
1.2 .................................................................................................................................................... 1
1.3 .................................................................................................................................................... 1
1.4 ........................................................................................................................................................... 1
1.5 I/O .......................................................................................................................................... 2
1.6 ................................................................................................................................................ 2
2. INTERNET EXPLORER .......................................................................................... 3
2.1 ................................................................................................................................................ 3
2.2 ............................................................................................................................................. 3
2.3 DPTZ () ............................................................................................................ 5
2.4 .................................................................................................................................. 6
3. ......................................................................................................................................... 7
3.1 ............................................................................................................................................. 7
3.2 .................................................................................................................................................... 8
3.2.1 ...........................................................................................................................................................8
3.2.2 QoS ..................................................................................................................................................................8
3.2.3 DDNS ...............................................................................................................................................................8
3.2.4 ...........................................................................................................................................................9
3.2.5 ...........................................................................................................................................................9
3.2.6 ...........................................................................................................................................................9
3.2.7 SMS................................................................................................................................................................10
3.2.8 ............................................................................................................................................................. 11
3.2.9 UPnP / Bonjour............................................................................................................................................... 11
3.2.10 RTP ..............................................................................................................................................................12
3.3 .............................................................................................................................................. 13
3.3.1 .....................................................................................................................................................13
3.3.2 .........................................................................................................................................................13
3.3.3 .........................................................................................................................................................14
3.3.4 .........................................................................................................................................................14
3.3.5 .........................................................................................................................................................14
3.4 .................................................................................................................................................. 15
3.4.1 ................................................................................................................................................................15
3.4.2 .........................................................................................................................................................15
3.5 .................................................................................................................................................. 15
3.5.1 ............................................................................................................................................................15
3.6 .................................................................................................................................................. 16
3.6.1 .........................................................................................................................................................16
3.7 .................................................................................................................................................. 17
3.7.1 .........................................................................................................................................................17
3.7.2 .........................................................................................................................................................18
3.7.3 .........................................................................................................................................................18
3.7.4 .....................................................................................................................................................19
3.7.5 .........................................................................................................................................................19
3.7.6 Google ....................................................................................................................................................20
3.7.7 .........................................................................................................................................................20
..................................................................................................................................................................20
1 ..................................................................................................................................... 22
2 .......................................................................................................................... 23
3 POE () ............................................................................................ 26
4 .......................................................................... 27
5 ................................................................................................................................ 29
6 ................................................................................................................................ 30
1.

1.1
iPhone / iPad
ONVIF



-- iPhone & iPad Windows Internet Explorer
() Power-over-Ethernet (POE)
() 200 LIVE MOS HDTV 1080p
( 1.3 ) 130 LIVE MOS HDTV 720p

1.2
3 PINI/O
( iPhone / iPad) ()

1.3

1.4

IP

I/O 3 PIN I/O 2 1.5 I/O

LAN 2 1.6

1
1.5 I/O

3 PIN I/O

I/O PIN Alarm Out

3 PINI/O Alarm Out

1.6

LAN Internet


( 250 250 )


( 250 250 ) ( 250 250 )



--
( 100 500 ) --


Internet --
( 100 500 )
Internet --

3G
(iPhone / iPad / Android )

--
3G ( 5 0.5 0.5 0.5 5 )
--
* LED - LED / LED

2
2. INTERNET EXPLORER

Microsoft Internet Explorer iPhone / iPad / Android

EagleEyes

iPhone / iPad / Android

http://www.eagleeyescctv.com

( iPhone / iPad) iPhone / iPad

www.surveillance-download.com/user/m317a.swf

2.1

1 http://IP :
IP 60.121.46.236 888 URL http://60.121.46.236:888
Enter

2 [LOGIN]
3
[]
[]

VLC playerSoftwareH264 Streaming Viewer

2.2

3

/

/ /

/
6 2.4
/ DPTZ
DPTZ*
/ 5 2.3 DPTZ ()


7 3.1

-- /
/ / H.264 / MPEG-4 / Motion JPEG
QuickTime
QuickTime Apple QuickTime
QuickTime QuickTime

VLC

-- / / / /
/
-- /
/ 200 130 D1
HD1080P (1920 x SXGA (1280 x 1024) D1 (720 x 480)
1080)
HD720P (1280 x 720) HD720P (1280 x 720) CIF (352 x 240)
VGA (640 x 480) VGA (640 x 480) CIF (352 x 240)
QVGA (320 x 240) QVGA (320 x 240)

/

[Esc]

SXGA / HD720P /HD1080P / VGA ./D1

QVGA
CIF
QVGA CIF

SXGA / HD720P HD1080P.

SXGA / HD720P HD1080P.

SXGA / HD720P HD1080P.

/
/
/ /
/
/

4
2.3 DPTZ ()

PTZ (DPTZ)

1 [DPTZ] DPTZ

-- DPTZ VGA QVGA

/
/

/

.

5
2.4

NVR

/
/ 11:00 ~ 12:00 14:00 ~ 15:00

4 8 16
4 8 16

[] []

6
3.

Internet Explorer

3.1
[]







8 3.2

13 3.3

15 3.4
15 3.5
16 3.6
17 3.7

DDNS PPPOE DHCP DDNS

[] [] [FTP] FTP

[] [] [E-Mail] E-Mail

[] [] [SMS]

IP

* Windows
UpnP

* Mac
Bonjour
Bonjour
Video Viewer
RTP

1.

2.

SD

7

1. /
2.
3.
1.
2. MAC
3.

1.

2.
Google
1.
2.

3.
4.

3.2

3.2.1

www.surveillance-download.com/user/m317a.swf .

3.2.2 QoS
( Quality of Service )
[]
256 10240

3.2.3 DDNS
[] [PPPOE] [DHCP] []
www.surveillance-download.com/user/m317a.swf

8
3.2.4

GMT

NTP SNTP (tock.stdtime.gov.tw)

3.2.5
FTP [] [] [] [FTP]

3.2.6
[] [] [] [E-Mail]

9

SMTP

25

SSL SSL

[] []

[]

3.2.7 SMS
Clickatell
27 4

[] [] [] [FTP]

Clickatell

[]

() 0 / 15 / 30 / 60

()

[]

10
3.2.8
IP []

IP
IP
[] ping IP [] ping
IP/MAC
IP/MAC
IP/MAC [] IP
IP/MAC
IP [] IP []
IP []

3.2.9 UPnP / Bonjour

UPnP Universal Plug and Play ()
Windows

Bonjour UPnP Bonjour Mac

UPnP

Bonjour

[] []

[]

Windows [] []
Mac (finder) Bookmark []

11
 ( UPnP)

Router
www.surveillance-download.com/user/m317a.swf
Router UPnP
Router
[] [] [ IP] [HTTP ] IP

IP

3.2.10 RTP
RTP (Real-time Transport Protocol) VLC

RTP

RTP 100
1024 65434
1124 65534

12

H264 / MPEG4 / JPEG (H264/ MPEG4/ JPEG)
224.0.0.1 ~ 239.255.255.255


224.0.0.1 ~ 239.255.255.255

(TTL) 1 255

3.3

3.3.1

/ / /

3.3.2


FPS FPS
Max Bit Rate

200 130 D1
QQVGA

13
3.3.3

[]

3.3.4

3.3.5

D1

*
1/101/301/151/61 2
**
[] []

180

* 0 ~ 10
[] LED [] [] LED
*


0 ~ 100
* ** D1

14
3.4

3.4.1
[]
[] []

3.4.2

3.5

3.5.1
[]

NVR

30 6

15
3.6

3.6.1

[N.O.] [N.C.]

[Motion JPEG]

[] []

1 10

[]
[]

(5 / 10 / 20 / 40 )

16


E-Mail E-Mail
[E-Mail] (H.264 / JPEG / MPEG4) (AVC / AVI) (1 5 )
[] []
FTP FTP
[FTP] (H.264 / JPEG / MPEG4) (AVC / AVI) (1 5 )
[] []
[] []

[] ( / )

3.7

3.7.1

[] MAC
LED 2 1.6 [ LED ]
[] []
LED [] []

[] [5 ][15 ] [30 ]
[]

17
3.7.2
[]

( / )

[] []

3.7.3
[] [] [
]

[]

18
 3.7.4
[]
[] []
[Login with CAPTCHA Image] []

3.7.5

1 [New] ()

16

16

1 / 5 ) / 10 ) / 1 ) / 1 ) /

2 []

2 [] [] []

19
 3.7.6 Google

Google

1 [ Google ]

2 IP [ API ]

3 API [ Google ]

3.7.7

1 [ ] ()

2 []

System.bin

(AVN801) AVN801

20


[] System.bin []

[]

[]

21
 1

200 130 D1

H.264 / MPEG4 / MJPEG

3 (H.264, MJPEG, MPEG4)
(Encode IPS)
LAN
LAN 10/100 Based-T Ethernet
DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP,

HTTP, RTP, RTSP, RTCP,IPv4, Bonjour, UPnP, DNS,UDP,IGMP, QoS
Frame 30
10
1.
2. IP
3.
1. Windows Internet Explorer

2. iPhoneiPad Android EagleEyes
ONVIF

1/2.9" SONY 1/4" SONY 1/3
HD1080P / HD720P / SXGA / HD720P / VGA /
D1 / CIF
VGA / QVGA / QQVGA*** QVGA
0.1 Lux / F1.5, 0 Lux ( LED )
1 / 60 (1/50) 1 / 100,000
--

48dB (AGC )
f3.8mm / F1.5
83.2 62.7 80.4
LED 12 (10 )

ATW
AGC Auto
IRIS AES
I/O
POE (IEEE 802.3af)


(10%) 12V / 1A 12V / 1A 5V / 1A 5V / 1A
0~40

iPad, iPhone & Android

RTC ()

PTZ
/ /
Pentium 4 CPU 1.3 GHz AMD
256 MB RAM
AGP Direct Draw32MB RAM
Windows 7Vista & XPDirectX 9.0
Internet Explorer 7.x
*
** 5mm
*** QQVGA

22
 2

H.264

()

Frame () kbps () kbps

SXGA FULL 3253 3216
2375 2160
1571 1266
1465 873
VGA 2010 1261
1042 1034
685 572
457 350
QVGA 646 366
482 350
302 286
168 161
SXGA 1/4 1163 1076
989 715
855 534
719 443
VGA 789 571
451 447
349 237
217 165
QVGA 269 147
182 131
164 113
97 71

23
 Frame () kbps () kbps
SXGA 1/15 581 374
405 342
487 248
337 141
VGA 358 79
201 63
180 28
92 15
QVGA 111 84
99 68
97 54
58 42

24
 D1

H.264

()

Frame () kbps () kbps

D1 FULL 2786 1546
1375 705
1234 425
441 245
CIF 955 290
364 171
328 111
161 68
D1 1/5 935 474
506 272
297 175
223 108
CIF 222 109
133 67
81 49
71 32
D1 1/30 127 70
197 20
61 11
50 4
CIF 42 7
38 2
22 1
28 0

25
 3 POE ()

IEEE802.3af Power-over-Ethernet (POE)

POE

router hub POE

router hub POE ( POE )

26
 4

Clickatell

1 http://www.clickatell.com/login.php New Customers

[Clickatell Central (API)]

2 [CONTINUE]

3
[Login]

27
 4 () [SEND ACTIVATION CODE]
Clickatell

5 Clickatell [Manage my Products] [My Connections]

[HTTP]

6 In [Add HTTP API] dial prefix callback type

[HTTP GET] [Submit]

28
 5

EagleEyes www.eagleeyescctv.com/supp_QnA.aspx

www.surveillance-download.com/user/m317a.swf
( 3G )

()

Router
()
[QVGA] [SXVGA]
[HD1080P]
[VGA]

[60 Hz] [50 Hz]

iPhone

IPCAM [] []
Internet Explorer [] [
] []

29
 6

1.5

(1)
(2)

SXGA VGA QVGA

() 25 115 211

30