ISD External

Imagery Support Data (ISD)
Documentation
v. 1.1.2
Disclaimer & Copyright
Copyright 2014
DigitalGlobe, Inc. All rights reserved.
Access to DigitalGlobe products and sensors is limited to existing re-seller terms and conditions.
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES
ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN
NEW EDITIONS OF THE PUBLICATION. DIGITALGLOBE MAY MAKE IMPROVEMENTS AND/OR CHANGES TO
THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS PUBLICATION AT ANY TIME.
DigitalGlobe Imagery Support Data (ISD) Documentation

v. 1.1.2 October 2014 2
Contents
Disclaimer & Copyright ........................................................................................................................... 2
List of Figures .......................................................................................................................................... 4
List of Tables ........................................................................................................................................... 5
1 Introduction ......................................................................................................................................... 6
2 Image Support Data ............................................................................................................................. 7
2.1 ISD File Description ..................................................................................................................................... 8
2.2 File Layout ................................................................................................................................................... 8
3 General Format and Conventions ..................................................................................................... 10
3.1 General File Format................................................................................................................................... 10
3.2 PVL Format ................................................................................................................................................ 10
3.3 XML Format ............................................................................................................................................... 10
3.4 Coordinate Conventions ........................................................................................................................... 10
3.4.1 Earth Coordinates (E)..................................................................................................................... 10
3.4.2 Image Coordinates......................................................................................................................... 11
3.4.3 Time ............................................................................................................................................... 12
4 Delivery Level Support Data .............................................................................................................. 13
4.1 Delivery Index (README) Contents........................................................................................................... 13
4.2 Delivery Layout File ................................................................................................................................... 16
4.3 Delivery Geographic Location Map Files ................................................................................................... 16
5 Product Component-Level Support Data .......................................................................................... 21
5.1 Product Component Index (README)....................................................................................................... 21
6 Image Metadata ................................................................................................................................ 23
6.1 Image Metadata Content .......................................................................................................................... 23
6.1.1 Heights Above Ellipsoid (HAE) ....................................................................................................... 40
6.1.2 Product Level to Product Type Relationships ................................................................................ 41
6.2 Product Browse File .................................................................................................................................. 41
6.3 Tile Map .................................................................................................................................................... 42
6.4 Rational Polynomial Coefficients .............................................................................................................. 46
6.5 Product Component XML File ................................................................................................................... 49
6.6 Manifest File.............................................................................................................................................. 51
6.7 Stereo File ................................................................................................................................................. 52
Appendix A: Example PVL Format ........................................................................................................ 55
Appendix B: Example XML Format ....................................................................................................... 58
Appendix C: Example Tile Map File ...................................................................................................... 61
Glossary ................................................................................................................................................ 62
Index ..................................................................................................................................................... 68

v. 1.1.2 October 2014 3
List of Figures
Figure 2.1 File Layout Diagram ................................................................................................................................................... 9
Figure 3.1 Earth Coordinate System ......................................................................................................................................... 11
Figure 3.2 Image Coordinate System ........................................................................................................................................ 11
Figure 6.1 Sample Product Browse File .................................................................................................................................... 41
Figure 6.2 Stereo Geometry Angles .......................................................................................................................................... 52

v. 1.1.2 October 2014 4
List of Tables
Table 2.1 Image Support Data (ISD) Files Delivered by Product Type ........................................................................................ 7
Table 4.1 Top-Level Delivery Index (README) Contents (ISDF.DEL.README).......................................................................... 13
Table 4.2 STRIP Shapefile Delivery Names and Attributes........................................................................................................ 16
Table 4.3 ORDER Shapefile Delivery Names and Attributes ..................................................................................................... 17
Table 4.4 TILE Shapefile Delivery Names and Attributes .......................................................................................................... 18
Table 4.5 PRODUCT Shapefile Delivery Names and Attributes ................................................................................................. 18
Table 4.6 PIXEL Shapefile Delivery Names and Attributes ........................................................................................................ 19
Table 4.7 MOSAIC_CLOSEDPOLYGONS Shapefile Delivery Names and Attributes ................................................................... 19
Table 5.1 Product Component Index (README) Contents ....................................................................................................... 21
Table 6.1 Image Metadata Contents ........................................................................................................................................ 23
Table 6.2 Product Level to Product Type Relationships............................................................................................................ 41
Table 6.3 Tile Map Contents ..................................................................................................................................................... 42
Table 6.4 RPC Terms ................................................................................................................................................................. 47
Table 6.5 RPC00B Contents....................................................................................................................................................... 47
Table 6.6 Stereo File Contents .................................................................................................................................................. 53

v. 1.1.2 October 2014 5
1 Introduction
This document describes the Image Support Data (ISD) format for DigitalGlobe Imagery products. These products are
available in a variety of product types, and contain different ISD depending on the type of the product. This document
describes the ISD, overall structure of files and specifies the data content and format of individual fields for the following
DigitalGlobe product types:
Basic Products
Stereo Products
Standard Products
Orthorectified Products
Digital Elevation Model Products
This document also presents some technical information to explain the significance of the data.
The term image in this document often refers to a general two-dimensional image product, including a Digital Elevation
Model (DEM) or another form of height model, as well as an image in the stricter sense. The context and the use of specific
product type names should make it clear which meaning is intended.

v. 1.1.2 October 2014 6
2 Image Support Data
All Imagery Products are delivered with a set of metadata files called Image Support Data (ISD). The number and types of
files delivered varies depending on the product ordered. The ISD files can be viewed as a collection point for all useful
ancillary data. Table 2.1 lists the Image Support Data files that are delivered with each product type.
Table 2.1 Image Support Data (ISD) Files Delivered by Product Type
FILE NAME EXTENSION BASIC IMAGERY STANDARD ORTHORECTIFIED

IMAGERY IMAGERY
Delivery-Level ISD
Top-Level Index (Readme)

.TXT XX XX XX
File
Top-Level Index (XML) File .XML XX XX XX
Layout File .JPG XX XX XX
Geographic Location Map

.shx, .shp, .dbf XX XX XX
Files
Manifest File .MAN FTP only FTP only FTP only
End of Transfer File .TXT FTP only FTP only FTP only
Product Component-Level ISD
Product Component Index

.TXT XX XX XX
(Subdirectory Readme) File
License File .TXT XX XX XX
Image Metadata File .IMD XX XX XX
Product Browse File .JPG XX XX XX
Tile Map File .TIL XX XX XX
1
Attitude File .ATT XX
Ephemeris File .EPH XX
Geometric Calibration File .GEO XX
RPC00B File .RPB XX XX
XML File .XML XX XX XX
1
For users of Basic products, refer to DigitalGlobe Imagery Support Data (ISD) Supplemental Documentation for Basic Products for information regarding
the .ATT, .EPH, and .GEO.

v. 1.1.2 October 2014 7
FILE NAME EXTENSION BASIC IMAGERY STANDARD ORTHORECTIFIED
IMAGERY IMAGERY
Stereo Data File .STE XX XX
2.1 ISD File Description

Products include Image Support Data (ISD) at two levels: one set of Delivery ISD, and one set of Product Component ISD for
each product option ordered. The number of product components depends on the layout of the order polygon with respect
to scene or strip boundaries. If the order polygon is entirely contained within a single scene or strip, then only one product
component will be delivered. If an order polygon crosses strip or scene boundaries, then the imagery product will be
divided into multiple product components. Product options include panchromatic, multispectral, or pan-sharpened.
The Delivery ISD (one set per delivery) consists of:
Top-Level Index (Readme) File. This file contains a list of names of the product files and the ISD files, along with copyright
information for the entire product delivery.
Top-Level Index XML File. This file contains the same information as the Top Level Index (README) file but in XML format.
Layout File. This file spatially illustrates how the delivery order is spread out across the media including product and order
polygon extents. The map includes volume and product labels. The file is in the standard JPEG format. Media volume
information is not included for electronic deliveries.
Geographic Location Map Files. These files spatially illustrate the product layout in a similar way to the layout file except in
shapefile format. The files represent the order polygon, strip boundaries, product boundaries, and tile boundaries.
Manifest File. The manifest file is included with electronic (FTP) deliveries only. The file contains the directory listing of the files
delivered with the product.
End of Transfer File. The end of transfer file is included with electronic (FTP) deliveries only. The appearance of this file on the
FTP site indicates that DigitalGlobe has completed transferring all product files. It is a zero length file.
The Product Component ISD (one set per product component option) consists of:
Product Component Index (Subdirectory Readme) File. The README file provides copyright information and the names of the
ISD files for a single product within a delivery.
License File. The license file contains the text of the selected license.
Image Metadata File. The image metadata file describes key attributes about the image product, including product level,
corner coordinates, and projection information, and time of acquisition.
Product Browse File. The product browse file is a JPEG compressed browse image of the delivered product.
Tile Map. The tile map file assists the customer in determining what tile to ingest to look at a specific part of the order polygon.
Attitude File. The attitude file includes the time of first data point, the number of points, and the interval between the points
and attitude information.
Ephemeris File. The ephemeris file includes the time of first data point, the number of points, and the interval between the
points and ephemeris information.
Geometric Calibration File. The geometric calibration file contains the standard photogrammetric parameters of a virtual
camera that models the corresponding camera and optical system for Basic Imagery products.
RPC00B File. The RPC00B file contains the RPC information, which can be used to rectify the image. This is a mathematical
mapping from object space coordinates to image space coordinates.
XML File. This file contains the same information as the combined README, Licensing, Image Metadata, Tile Map and RPC00B
files, in XML format. For Basic Imagery Products, the attitude, ephemeris, and geometric calibration file are included as well.
Stereo File. This file is provided with Stereo pairs. It identifies each image in the stereo pair and describes the stereo ground
coverage and viewing geometry.
2.2 File Layout

This section describes the structure by which the Image Support Data (ISD) files are organized for delivery. Figure 2.1
displays the layout as it applies to delivery of imagery and ISD files for all media types. Product Level Directories are

v. 1.1.2 October 2014 8
identified with the product ID and a three-character descriptor: PAN for Panchromatic, MUL for Multispectral, PSH for
Pansharpened, and MOS for Mosaicked products.
Figure 2.1 File Layout Diagram

v. 1.1.2 October 2014 9
3 General Format and Conventions
3.1 General File Format
Image Support Data (ISD) files are provided in the Parameter Value Language (PVL). The information in PVL format is
provided in multiple files while the information in XML is provided in a single file. The information provided in PVL and XML
are the same semantically but differ only in syntax.
3.2 PVL Format

Each tag consists of a variable length parameter name and a parameter value, in the form parameterName = value followed
by a semi-colon. The value can be an integer (decimal, binary, octal, or hexadecimal), a floating-point number, a character
string (one or more characters), a coordinate universal time (UTC), a set, or a list. The format for UTC time is YYYY-MM-
DDThh:mm:ss.ddddddZ. Character strings values must be enclosed in double quotation marks. Sets are delimited by { }, and
lists are delimited by ( ). Nested sets and lists are allowed. Comments in the file begin with a slash-asterisk (/*) and end with
an asterisk-slash (*/).
Named groups begin with BEGIN_GROUP = GROUPNAME and end with END_GROUP = GROUPNAME. Nested groups are
allowed. The end of a PVL module is indicated by the keyword END, followed by a semi-colon.
Only required fields need to be specified in the ISD files.
For an example of the PVL-formatted file, please see Appendix A: Example PVL-Format on page 55.
3.3 XML Format

All the information contained in the PVL ISD files is also provided in XML format. For an example of the possible XML
formatted file, please see Appendix B: Example XML Format on page 58.
3.4 Coordinate Conventions

For geolocation purposes, Image Support Data (ISD), for all product types, references both image coordinates and earth
coordinates as described in the following sections.
3.4.1 Earth Coordinates (E)

Earth coordinates are expressed relative to an earth-centered fixed (ECF) reference system that rotates with the earth. In
particular, all ECF coordinates in ISD files are given in the WGS 84 reference system, including geocentric cartesian
coordinates (XE, YE, ZE) and geodetic coordinates (latitude, longitude). The WGS 84 ZE-axis points in the direction of the
Conventional Terrestrial Pole (CTP); the XE-axis lies along the intersection of the meridian plane and the CTP equator,
pointing outward at Greenwich; the YE-axis completes the right-handed orthogonal coordinate system.

v. 1.1.2 October 2014 10
ZE
Prime meridian Equatorial plane
YE
XE
Figure 3.1 Earth Coordinate System

All heights are in meters with respect to the WGS 84 ellipsoid.
All easting and northing values in any of the ISD are specified in the projection determined by the datum and map
projection fields in the image metadata file.
3.4.2 Image Coordinates

An image address is specified as a (column, row) pair. When the image is displayed, column numbers increase toward the
right and row numbers increase in the downward direction. Address (0, 0) corresponds to the pixel displayed in the upper
left corner. Adherence to these display conventions ensures that a displayed image will have the same sense as an aerial
view of the grounddiffering from an aerial view by a proper rotation.
(0,0) 01234 column numbers N-1
0
1
2
row
numbers
M-1 (N-1, M-1)
Figure 3.2 Image Coordinate System

v. 1.1.2 October 2014 11
The detector in column 0 of a detector array produces the pixels in column 0 of the corresponding Basic image.
The ground location of a specific pixel in the image is the geolocation of the center of that pixel.
3.4.3 Time
All absolute times are in Coordinated Universal Time (UTC) in the format YYYY-MM-DDThh:mm:ss.ddddddZ.
Relative time offsets from a fixed absolute time are measured in seconds, unless specified otherwise.
An example of both absolute UTC time and relative time is the time-tagged line count (TLC) data in the image metadata file.
The TLC data, which are pairs of line numbers and the associated exposure times, provide a way to accurately estimate the
time of exposure of any line in the image. The first such timing event for an image is reported in the image metadata file as
an absolute UTC time, but subsequent events are reported as time offsets, in seconds, relative to this initial time.

v. 1.1.2 October 2014 12
4 Delivery Level Support Data
4.1 Delivery Index (README) Contents
The Delivery Index contains a list of names of the product files and the Image Support Data (ISD) files, along with copyright
information for the entire product delivery. The Delivery Index is found in a Top Level README file and a Top Level XML file
delivered with each delivery, and each describes all of the files for all of the products delivered within that delivery. The
README file and the XML file contain the same information. The Top Level README File is named for the 12-digit
DigitalGlobe Order Item number and the 2-digit delivery increment, for example: 000000077583_01_README.TXT and
000000077583_01_README.XML. Table 4.1 defines the Top Level Delivery Index (README) contents.
Table 4.1 Top-Level Delivery Index (README) Contents (ISDF.DEL.README)
FIELD FIELD NAME / FORMAT RANGE / VALUE CONDITIONS /

DESCRIPTION [DG RANGE / VALUE, IF DIFFERENT FROM COMMENTS
FORMAT RANGE / VALUE]
version Version of the ISD. 20.0 to 99.99
Use, duplication or disclosure by the

government is subject to the restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software Clause
contained in D.F.A.R.S. 252.227-7013, and
subparagraphs (c)(1) and (2) of the
Commercial Computer Software-Restricted
Rights contained in 48 C.F.R. 52.227-19.
Contractor/manufacturer is DigitalGlobe, 2nd paragraph
Incorporated at 1601 Dry Creek Drive, Suite Copyright YYYY
Copyright and
copyrightText 260, Longmont, CO 80503-6493. Copyright DigitalGlobe ...
restricted use text.
YYYY DigitalGlobe Incorporated, Longmont CO Where yyyy is the
USA 80503-6493 DigitalGlobe and the current year
DigitalGlobe logo are trademarks of
DigitalGlobe, Incorporated. The use and/or
dissemination of this data and/or of any
product in any way derived there from are
restricted. Unauthorized use and/or
dissemination is prohibited. DigitalGlobe
WWW Reference:
http://www.digitalglobe.com
The time in this tag has

Time of media
mediaCreationDate YYYY-MM-DDThh:mm:ss.dddddZ precision to 6 decimal
creation.
places.
12-digit DigitalGlobe
Order Item number,
nnnnnnnnnnnn_mm
orderNumber underscore, and 2-
Example: 052265559010_01
digit delivery
increment.

v. 1.1.2 October 2014 13
Lists all filenames such as:

A list of all files in the This field will vary
GIS files
fileList delivery including depending on product
Metadata files
path directories. type.
Product files
Customer supplied
description of order.
areaDesc Null if no Example: IS_05
information supplied
by the customer.
DigitalGlobe Order
dgOrderNo Example: 052265559
Number.
12-digit DigitalGlobe
dgOrderItemNo Example: 05226559010
Order Item Number.
Customer supplied
order number. Null if
custOrderNo no information Example: IS_05
supplied by the
customer.
Customer supplied Example:

order item number. 40005
custOrderItemNo Null if no 40009
information supplied 1
by the customer. Null
Date of first image

collectionStart YYYY-MM-DDThh:mm:ss.ddddddZ
acquisition.
Date of final image

collectionStop YYYY-MM-DDThh:mm:ss.ddddddZ
acquisition.
Two letter country

countryCode code of center point Example: Currently blank.
of order polygon.
Level 3A: 1:50,000

Level 3D: 1:12,000
The NMAS mapping Only applicable to
Level 3E: 1:10,000
productScale scale of Orthorectified Orthorectified (level 3)
Level 3F: 1:5,000
Products. products.
Level 3G: 1:4,800
Level 3X: Custom

v. 1.1.2 October 2014 14
Indicates whether this

1 for single,
numberOfLooks is a single product or a
2 for stereo pair
stereo pair.
Estimate of the max

cloud-covered
fraction of the
delivery.
For mosaic products,
this calculation is
based on the
intersection of the 0.000 to 1.000
cloudCover -999.0 if not assessed
polygons contained in Precision: 3 decimal places
the
MOSAIC_CLOSEDPOLY
GONS shapefile with
the cloud polygons
associated with that
part of the relevent
input imagery.
Latitude of NW corner
of the minimum
Range: 90.00000000
nwLat bounding rectangle
Precision: 8 decimal places
(MBR) of the order
polygon.
Longitude of NW
corner of the
Range: 180.00000000
nwLong minimum bounding
rectangle (MBR) of
the order polygon.
Latitude of SE corner
of the minimum
Range: 90.00000000
seLat bounding rectangle
(MBR) of the order
polygon.
Longitude of SE
corner of the
Range: 180.00000000
seLong minimum bounding
rectangle (MBR) of
the order polygon.

v. 1.1.2 October 2014 15
4.2 Delivery Layout File
The Layout file illustrates the following:
Outline of the Product area (order polygon)
Outline of the Product Component areas (product polygon)
Distribution of the above areas on the delivery media
The Layout file is an image file in JPEG format, without any additional attributes. The information contained in this file is not
duplicated in the Top Level XML file.
4.3 Delivery Geographic Location Map Files

Geographic Location Map files are similar to the Product Component Data files (Section 5) but in Shapefile format,
projected to WGS84 Geographic (Lat/Lon). Table 4.2 through Table 4.7 define the Delivery Shapefiles contents. These
product shapefiles are delivered as read/writable ASCII text files.
DigitalGlobe provides the following Geographic Location Map files with every delivery:
Strip or Substrip Area. This file shows the vertices and boundaries of the strips or substrips used to generate the
product, as well as the catalog ID for each of these areas. For example: 052265559010_01_STRIP_SHAPE.dbf
Product Area. This file shows the vertices and boundaries of the complete product as ordered by the customer. For
example: 052265559010_01_ORDER_SHAPE.dbf
Product Component Areas. This file shows the vertices and boundaries of the product components that make up the
delivery, and the allocation of the product components to media. For example:
052265559010_01_PRODUCT_SHAPE.dbf
Product Subcomponent Areas. This file shows the vertices, boundaries, name, and filename of each tile or sub-strip in
the product components, as well as the product component to which each belongs. Example filename:
052265559010_01_TILE_SHAPE.dbf
Product Pixel Area. This file shows the vertices and boundaries of actual imagery pixels of the product components
that make up the delivery (non-blackfill pixels.) In the Product Pixel area shapefile, the 12-digit DigitalGlobe Order Item
number and the 2-digit delivery increment (SOLI) is pre-pended by an acquisition date-time of one of the contributing
raw images along with a mnemonic that describes the product level as in the following example: 08JUL30153254-P2AS-
052265559010_01_P001_PIXEL_SHAPE.dbf
For ortho-mosaic products, DigitalGlobe delivers an additional Geographic Location Map file for each product:
Mosaic seamlines. This file shows the vertices and boundaries of each image strip that contributed to the generation of
the mosaic. The Mosaic seamline <shapefile name> has the DigitalGlobe orders part ID (for example, P001) pre-
pended. For example: 052270931010_01_P001_MOSAIC_CLOSEDPOLYGONS_SHAPE.dbf
Table 4.2 STRIP Shapefile Delivery Names and Attributes
FIELD FIELD NAME / DESCRIPTION FORMAT RANGE / VALUE CONDITIONS /

[DG RANGE / VALUE, IF COMMENTS
DIFFERENT FROM FORMAT
RANGE / VALUE]
Catalog ID corresponding with associated strip

stripDesc Example: 10100100017C2400
or substrip

v. 1.1.2 October 2014 16
[DG RANGE / VALUE, IF COMMENTS
DIFFERENT FROM FORMAT
RANGE / VALUE]
Azimuth angle of the sun measured from north

Decimal precision
sunAzimuth clockwise, in degrees, at the time the strip or Range: 0.0 360.0
may vary.
substrip was acquired.
The spacecraft elevation angle measured from

nadir to the image center as seen from the Decimal precision
offNadir Range: 0.0
spacecraft at the time the strip or substrip was may vary.
acquired.
Example: 2002-12-
acquisitio Populated with the strip acquisition date-time.
29T15:58:08.626765Z
Table 4.3 ORDER Shapefile Delivery Names and Attributes
FIELD FIELD NAME / FORMAT RANGE / VALUE CONDITIONS / COMMENTS

DESCRIPTION [DG RANGE / VALUE, IF DIFFERENT
FROM FORMAT RANGE / VALUE]
Item number corresponding This is the 12-digit DigitalGlobe

orderDesc with associated order Example: 052265559010 Order Item number. Required, if
polygon. available.
Optional order number Only if customer has supplied

custOrd supplied by the customer at Example: IS_46 order number. Required, if
time of order placement. available.
Optional order item number

Only if customer has supplied
custOrdItm supplied by the customer at Example: 40005
order item. Required, if available.
time of order placement.
WE (WGS84)
NAR (NAD83)
The Datum in which the
datum NAS (NAD27) Blank for Basic (1B) products.
product was ordered.
TOYM (Toyko Mean)
GRS80 (GRS80)
UTM
The projection in which the State Plane Coordinates
projection Blank for Basic (1B) products.
product was ordered. Japan RCS Coordinates
Geographic (Lat/Long)
Start date of product

createDate YYYY-MM-DDThh:mm:ss.ddddddZ
creation.

v. 1.1.2 October 2014 17
Table 4.4 TILE Shapefile Delivery Names and Attributes
FIELD FIELD NAME / FORMAT RANGE / VALUE CONDITIONS / COMMENTS

DESCRIPTION [DG RANGE / VALUE, IF DIFFERENT FROM
If R or C 9: RnCn
If R or C 99: RnnCnn
If R or C 999: RnnnCnnn Rows and Columns do not have to
be of the same order of
Examples: magnitude.
tileName Tile Name R1C1 For example:
R19C3 A tile of a mosaic with 6 columns
and 15 rows would be displayed
RegionTile Example: as: RnnCn
iz_20071231_uncl_ci_
322230n1153730w_imagery.tif
Example: 02JUN25001236-2AS_R1C1-
fileName Name of the image file.
000000092184_01_P001.NTF
Unique product
prodDesc Example: P001 Required, if available.
identifier
Volume number of the

volNum media on which the Example: Vol. 1
tile is located.
Table 4.5 PRODUCT Shapefile Delivery Names and Attributes

[DG RANGE / VALUE, IF DIFFERENT COMMENTS
prodDesc Unique product identifier Example: P001
Volume number of the media on which the

volNum Example: Vol. 1-2
tile is located.
PanSharp
Defines type of spectral bands in product.
Multispectral
bandInfo (PanSharp, Multispectral, All Band,
All Band
Panchromatic).
Panchromatic

v. 1.1.2 October 2014 18
Table 4.6 PIXEL Shapefile Delivery Names and Attributes

[DG RANGE / VALUE, IF DIFFERENT FROM COMMENTS
Example: 3AUG27021804-M2AS-
prodDesc Unique product identifier
005357007010_01_P001_PIXEL_SHAPE
Volume number of the media on

volNum Example: Vol. 1-2
which the tile is located.
Table 4.7 MOSAIC_CLOSEDPOLYGONS Shapefile Delivery Names and Attributes

imageIdStr Imagery identifier Example: 10100100012BEA00
acqDate Imagery acquisition date YYYY-MM-DDThh:mm:ss.ddddddZ
Range: 0.10000 100.00000 For validation, this range is

gsd Ground sample distance in meters
Precision: 5 decimal places 0.10000 to 100.00000.
Requested product accuracy from Range: 0.00000 15.44000

horError
the order Precision: 5 decimal places
Cloud cover percentage is

calculated by intersecting the Range: 0.00000 to 100.00000
cloudCover
closed polygon with cloud polygons Precision: 5 decimal places
from the underlying image strips.
Angle from s/c to strip crosstract Range: 0.00000 30.00000 Can be exceeded with
offNadir
center. Precision: 5 decimal places reduced image quality.
Examples for cardinal direction, but

allow for all permutation including
angles:
scanAz Image scan azimuth.
North-to-South
South-to-North
East-to-West
West-to-East
Forward
scanDir Image scan direction.
Reverse
The orientation angle of the

Range: 0.00000 360.00000
collectAz generated collection strip relative
to true north.

v. 1.1.2 October 2014 19
The collection elevation is the angle

between the horizontal and the ray Range: 0.00000 90.00000
collectEl
originating from the optical center Precision: 5 decimal places
to the point of incidence.
Range: 0.00000 360.00000

sunAz Sun azimuth.
Range: 0.00000 90.00000

sunEl Sun elevation.
QB02, WV01, WV02,

satellite Satellite mnemonic
Aerial, GE01, WV03
prodDate Production generation date YYYYMMDD
currDate Production generation date YYYYMMDD
collDate Date of image collection YYYYMMDD
Range: 0.00000 100.00000

absAcc Product absolute accuracy
absAccUnit Absolute accuracy units Meters
Range: 0.00000 100.00000

relAcc Product relative accuracy
relAccUnit Relative accuracy units Meters

v. 1.1.2 October 2014 20
5 Product Component-Level Support Data
5.1 Product Component Index (README)
The Product Component Index lists the names of the image, browse, and ISD files in each product component subdirectory
of a delivery. Other ISD files may or may not be included in a delivery depending on the type of the products in the order.
One Product Component Index is provided for each product component of each delivery within the product component
subdirectory. Table 5.1 defines the Product Component Index contents.
Table 5.1 Product Component Index (README) Contents

(C) COPYRIGHT yyyy DigitalGlobe, Inc., Longmont CO

USA 80503. DigitalGlobe and the DigitalGlobe logos
Copyright and are trademarks of DigitalGlobe, Inc. The use and/or Where yyyy is the
copyrightText
restricted use text dissemination of this data and/or of any product in current year
any way derived there from are restricted.
Unauthorized use and/or dissemination is prohibited.
version Version of the ISD 20.0 to 99.99
Thank you for ordering from DigitalGlobe! This

Introduction.
directory contains both an Imagery Product and the
General textual
corresponding Image Support Data (ISD) files that
intro information about
fulfill your order. The naming convention for the
the product and file
image is <acquisition time>-<product info>-<product
contents.
id>.<format extension>
BEGIN_GROUP=PROUDCT_1
XMLFilename Product Component productname.XML

XML file
BASE.TXT
GROUP.TXT
Predicated on
Licensing text file ENTERPRISE.TXT
licenseTxtFilename license order
name ENTERPRISE_PREM.TXT
parameter.
EDUCATIONAL.TXT
DEMONSTRATION.TXT
Image metadata file

IMFFilename productname.IMD
name
Only for Basic

ephemFilename Ephemeris file name productname.EPH
(1B) products.
Only for Basic

attFilename Attitude file name productname.ATT
(1B) products.

v. 1.1.2 October 2014 21
tilFilename Tile map file name productname.TIL
Geometric Only for Basic

geoCalFilename productname.GEO
calibration file name (1B) products.
Only valid for

stereoFilename Stereo file name productname.STE
stereo products
Not applicable to
RPC00BFilename RPC00B file name productname.RPB Orthorectified
(level 3) products.
END_GROUP=PRODUCT_1
END;

v. 1.1.2 October 2014 22
6 Image Metadata
6.1 Image Metadata Content
For ortho-mosaics, if an input image is not used as part of the final product, it will not be represented in the Image
Metadata Data (IMD). All other input images will be represented in the IMD and will appear in order of their acquisition
date-timestamp with the oldest image appearing first. The date-timestamp of the oldest image will be used as part of the
product filenames.
The Image Metadata specifies the basic characteristics of an image or a DEM as specified in Table 6.1.
Table 6.1 Image Metadata Contents
FIELD FIELD NAME / FORMAT RANGE / CONDITIONS /

DESCRIPTION VALUE COMMENTS
[DG RANGE / VALUE, IF
DIFFERENT FROM
version Version of the ISD 20.0 to 99.99
YYYY-MM-
generationTime Time of file generation.
DDThh:mm:ss.ddddddZ
Optional if product does

Example: not originate from
productOrderId Order Item ID of product
052270730010_01_P001 DigitalGlobe or co-
producer.
ID for the corresponding record in DGs Example:

None if catalog not kept
productCatalogID catalog. In multi-set products this 903001004AA74B00
in DigitalGlobe archive.
would be the group catalog id. None
ID for the corresponding record in DGs

catalog (for multi-set products this
Example:
would be the child or subset Used only with multi-set
childCatalogID 210001004AA74C00
catalog id). In cases where children products
None
products do not have separate IMD
files, this field may be repeated.
Basic1B", "Standard2A",
"ORStandard2A",
This is a combination of product name
imageDescriptor "OrthoRectified3",
and product type.
"Stereo1B", StereoOR2A,
"DEM4

v. 1.1.2 October 2014 23
DIFFERENT FROM
Values: Only applicable to

Level 3A: 1:50,000 Orthorectified (level 3)
Level 3D: 1:12,000 products.
This is the NMAS mapping scale of the
productScale Level 3E: 1:10,000 For validation purposes,
Orthorectified Product
Level 3F: 1:5,000 this shoudl be evaluted as
Level 3G: 1:4,800 a text string tha tis not
Level 3X: Custom bound by enumeration.
Values:
Only applicable to
Level 3A: 25.40
Orthorectified (level 3)
Identifies the worst case CE90% in Level 3D: 10.16
products.
productAccuracy meters for the associated Level 3E: 8.47
For validation purposes,
productScale. Level 3F: 4.23
the actuals may range
Level 3G: 4.06
from 0.1 to 100.00.
unavailable
Only applicable for

Orthorectified (level 3)
Values:
products.
Level 3A: 15.44
Level 3X uses customer
Level 3D: 6.18
supplied data. For
Two Dimensional Root Mean Square Level 3E: 5.15
RMSE2D example, DEM(s), GCPs or
Error Level 3F: 2.57
both. Therefore, DG does
Level 3G: 2.47
not guarantee accuracy.
Level 3X: 0.00
the actual values range
from 0.1 to 99.00.

v. 1.1.2 October 2014 24
DIFFERENT FROM
Identifies the spectral band.

P = Panchromatic,
Multi = all VNIR Multi-spectral bands
(4 for QB02,GE01 and 8 for WV02,
WV03)
N = NearInfraRed
R = Red
G = Green P
B = Blue Multi
"RGB" = Red + Green + Blue N N2, RE, Y and C in any
"NRG" = Near-IR + Red + Green, R band combination are
BGRN = Blue + Green + Red + Near-IR G available for WorldView-2
RGB, NRG, and BGRN are pan- B and WorldView-3 only.
sharpened color images, stored at the RGB
bandId panchromatic spatial resolution. NRG For validation, this field is
BGRN constrained by the
For WorldView-2 and WorldView-3 N2 following definition:
there are also the following bands: RE A-Za-z0-9 (alphanumeric)
N2=NIR2 Y plus '-' for up to 7 (1 to 7)
RE=Red Edge C characters.
Y=Yellow MS1
C=Coastal MS2
MS1=First 4 bands (N,R,G,B)

MS2=Second 4 bands (N2,RE,Y,C)
For a DEM, this field indicates the

spectral band (Pan) used to create the
product.
Identifies the algorithm used to create

panSharpenAlgorit pan-sharpened products: UNB
hm None
UNB = University of New Brunswick
numRows Number of rows. 1N
numColumns Number of columns. 1N
LV1B, LV2A, LV3A,

Product level that indicates the
LV3D, LV3E, LV3F, Refer to Table 4.5 for a
radiometric and geometric corrections
productLevel LV3G, LV3X, LV4, definition of Product
for backward compatibility in terms of
Stereo 1B, Stereo 2A, Levels.
Product Type.
Stereo OR2A

v. 1.1.2 October 2014 25
DIFFERENT FROM
Basic, Stereo,
productType Product type Standard, Ortho,
DEM
Indicates whether this is a single Non-Stereo: 1

numberOfLooks
product or a stereo pair Stereo Pair: 2
Not applicable for a DEM

radiometricLevel Options for radiometric correction. Corrected
product.
Standard (level2), Stereo

DRA/Color
radiometricEnhanc Option for Color Correction and OR2A (level2A), and
DRA/Contrast
ement Contrast Enhancement Orthorectified (level 3)
Off
Products only.
The number of bits per pixel in the

product image files. If the product is
compressed, this value is the original
bits per pixel, before compression. This
value will be either 8 or 16, depending
on the product. Note that this is the
8
bitsPerPixel number of bits stored in the image file
16
for each pixel value as opposed to the
number of significant bits that define
the pixel brightness value. That is, for a
product which is delivered as 16 bits
per pixel, only 11 bits define the
brightness value of each pixel.
This field will only be

included if the strip
Portions of the strip intersecting the
restrictedAreaInter intersects the restricted
restricted area have been modified to Yes
sect area and has been
meet the allowable GSD.
modified to meet the
allowable GSD.
This field will not be

The type of compression, if any, None
compressionType included in Metadata
applied to the product imagery. JPEG2000
products.
DG commercial 2.5
DG commercial 12 Included only when the
Name of the DigitalGlobe JPEG2000
jpegProfileName DG commercial 10:1 compression type is
profile applied.
DG commercial 8:1 JPEG2000.
DG commercial 4:1

v. 1.1.2 October 2014 26
DIFFERENT FROM
The following group is repeated for each spectral band in the delivered image product. The index b in the group name is one of (P,N,R,G,B,
N2,RE,Y,C) to differentiate the band group names. In this group, latitudes (Lat) and longitudes (Lon) are in degrees and heights above the
WGS 84 ellipsoid (HAE) are in meters.
BEGIN_GROUP=BAND_b
Geodetic longitude of the upper left Range: 180.00000000

ULLon
pixel of the image. Precision: 8 decimal places
Geodetic latitude of the upper left pixel Range: 90.00000000

ULLat
of the image. Precision: 8 decimal places
Height above the ellipse of the upper

ULHAE Precision: 2 decimal places
left pixel of the image.
Geodetic longitude of the upper right Range: 180.00000000

URLon
Geodetic latitude of the upper right Range: 90.00000000

URLat
Height above the ellipse of the upper

URHAE Precision: 2 decimal places
right pixel of the image.
Geodetic longitude of the lower right Range: 180.00000000

LRLon
Geodetic latitude of the lower right Range: 90.00000000

LRLat
Height above the ellipse of the lower

LRHAE Precision: 2 decimal places
right pixel of the image.
Geodetic longitude of the lower left Range: 180.00000000

LLLon
Geodetic latitude of the lower left pixel Range: 90.00000000

LLLat
of the image. Precision: 8 decimal places
Height above the ellipse of the lower

LLHAE Precision: 2 decimal places
left pixel of the image.

v. 1.1.2 October 2014 27
DIFFERENT FROM
The conversion factor, KnTDI, that

converts the relative radiance values in
an image file into corresponding -999 = None when
absCalFactor absolute radiance, measured in Example: 6.447600e-02 radiometricEnhancement
watts/sq m/ster. This is calibrated 6000 = DRA.
K blackbody radiance, integrated over
the appropriate spectral window.
The effective bandwidth is associated

effectiveBandwidt with the absCalFactor and it's value is 0.0000 to 1.0000
h required to calculate top-of- scientific notation
atmosphere spectral radiance.
Values:
PAN: 6, 8, 10, 13, 16, 18,
24, 32, 48, 56, 64
Level of the time-delayed integration, MS: 1, 3, 6, 10, 14, 18, 21, 1 only valid for QuickBird
TDILevel
as commanded to the spacecraft. 24 MS image.
GE01 Pan: 8, 16, 32, 48, 64
MS (mode 13/24):
3, 6, 10 , 14, 18, 21, 24
END_GROUP=BAND_b
GeoTIFF
NITF20
NITF21
External product format. NITF21NCDRD
GeoTIFF and NITF are image formats TIFF

for Basic, Stereo, Standard and CIB
Orthorectified products. DTED
outputFormat USGS DEM
CIB is an image format for ASCII DTM
orthorectified 1:24,000 and 1:12,000, J2K
while DTED, USGS DEM, and ASCII DTM GeoJP2
are digital elevation model formats for GeoPDF
DEM products. MrSID
RPF
KIP
IMG

v. 1.1.2 October 2014 28
DIFFERENT FROM
The following group is repeated for each n = 1,,numImagesInProduct. That is, for all images used to create the image
product. For single image products (Basic) there is one .IMD file per source image or strip, so the group will appear only
once for each product component. For multiple image products (Stereo, Standard, and Orthorectified), the following group
will be repeated for each source image in the image product. The index n in the group name is a sequential number of the
image used to produce the product (1,2,3,,n) to differentiate the image group names. The image with the earliest
aquisition time will be assigned n = 1, and incremented in ascending order.
BEGIN_GROUP=IMAGE_n
QB02, WV01, WV02,

satId Satellite Id.
GE01, WV03
FullSwath, Only FullSwath for

mode Sensor Mode.
CenterSwath QuickBird.
Only Forward for

scanDirection Sensor scan direction. Forward, Reverse
QuickBird
DigitalGlobe catalog Id for the raw data

used in this product.
For mosaics, only strips used in the Example: For each sub-strip or area
CatId
mosaic creation should be listed. The 1020010007AF7100 based product.
catalog ids are ordered from earliest
aquisition to latest.
Absolute time of the first time-tagged

YYYY-MM- Only for Level 1B
TLCTime line count record, used in the product
DDThh:mm:ss.ddddddZ products.
component.
Number of time-tagged line count

Only for Level 1B
numTLC records in the TLCList used in the Range: 1
products.
product component.

v. 1.1.2 October 2014 29
DIFFERENT FROM
List of time-tagged line count (TLC)

records. Each TLC record consists of
Example:
lineNumber (Short)
(
timeOffset (Float)
(-256, 0.000000) ,
lineNumber is the image line number
(768, 0.148404), ...
for a line in the product component.
(N, N.nnnnnn) Only for Level 1B
TLCList This number will be negative if the TLC
) products.
record precedes the product
component.
Precision: TLCTime will
timeOffset is the recorded time tag for
have 6 decimal places
this line, in seconds after TLCTime.
precision.
The timeOffset will be negative if the
image is in the reverse scan direction.
Exposure time for the first line in the YYYY-MM-

firstLineTime
strip used for the product component. DDThh:mm:ss.ddddddZ
For Pan-Sharpened
Average number of image lines products, this will be
avgLineRate Precision: 2 decimal places
exposed per second. equal to the average MS
line rate.
Value: 1/avgLineRate for

Precision may not run to 9
Duration of the exposure interval for VNIR
exposureDuration if there are trailing
each line. Precision: up to 9 decimal
zeroes.
places
minCollectedRowG Minimum original collected GSD of the Range: 0.100-100.000

SD product in the row direction. Precision: 3 decimal places The Pan GSD is used for
Panchromatic and Pan-
maxCollectedRow Maximum original collected GSD of the Range: 0.100-100.000 sharpened products; the
GSD product in the row direction. Precision: 3 decimal places MS GSD is used for MS
products.
meanCollectedRow Mean original collected GSD of the Range: 0.100-100.000 These value ranges are
GSD product in the row direction. Precision: 3 decimal places based on 0 to 45 degrees
off nadir for all sensors
minCollectedColGS Minimum original collected GSD of the Range: 0.100-100.000 with regard to VNIR.
D product in the column direction. Precision: 3 decimal places
For validation all GSD
maxCollectedColGS Maximum original collected GSD of the Range: 0.100-100.000 values will range from 0.1
D product in the column direction. Precision: 3 decimal places to 100.000 which allows
for a range of
meanCollectedCol Mean original collected GSD of the Range: 0.100-100.000 subsampling.
GSD product in the column direction. Precision: 3 decimal places

v. 1.1.2 October 2014 30
DIFFERENT FROM
Mean GSD of the original, collected Range: 0.100-100.000

meanCollectedGSD
row and column GSD. Precision: 3 decimal places
meanProductRowG Mean GSD of the product in the row Range: 0.100-100.000 Applicable to Level 1B
SD direction. Precision: 3 decimal places products only.
meanProductColGS Mean GSD of the product in the Range: 0.100-100.000 Applicable to Level 1B
D column direction. Precision: 3 decimal places products only.
Mean GSD of the product row and Range: 0.100-100.000 Applicable to Level 1B
meanProductGSD
column GSD. Precision: 3 decimal places products only.
Mean position uncertainty in line and

rowUncertainty pixel directions. These are 3-sigma, Precision: 2 decimal places
one-dimensional values.
Mean position uncertainty in line and

colUncertainty pixel directions These are 3-sigma, one- Precision: 2 decimal places
dimensional values.
Range: 0.0 to 360.0

Minimum azimuth angle of the sun
minSunAz Precision: One decimal
measured from north clockwise.
point
Range: 0.0 to 360.0

Maximum azimuth angle of the sun
maxSunAz Precision: One decimal
point
Range: 0.0 to 360.0

Mean azimuth angle of the sun
meanSunAz Precision: One decimal
point
Range: 90.0
Minimum elevation angle of the sun
minSunEl Precision: One decimal
from horizontal.
point
Range: 90.0
Maximum elevation angle of the sun
maxSunEl Precision: One decimal
from horizontal.
point
Range: 90.0
Mean elevation angle of the sun from
meanSunEl Precision: One decimal
horizontal.
point

v. 1.1.2 October 2014 31
DIFFERENT FROM
Minimum azimuth angle of the satellite Range: 0.0 to 360.0

minSatAz with respect to the center line, in Precision: One decimal
degrees. point
Range: 0.0 to 360.0

Maximum azimuth angle of the
maxSatAz Precision: One decimal
satellite with respect to the center line.
point
Range: 0.0 to 360.0

Mean azimuth angle of the satellite
meanSatAz Precision: One decimal
with respect to the center line.
point
Range: 90.0
Minimum elevation angle of the
minSatEl Precision: One decimal
point
Range: 90.0
Maximum elevation angle of the
maxSatEl Precision: One decimal
point
Range: 90.0
Mean elevation angle of the satellite
meanSatEl Precision: One decimal
with respect to the center line.
point
Minimum dihedral angle measured at

the spacecraft from the nominal
spacecraft YZ plane to the plane that Range: 90.0
minInTrackViewAn
contains the ground projection of the Precision: One decimal
gle
product center-line and the spacecraft point
Y-axis. A positive angle indicates the
sensor is looking forward.
Maximum dihedral angle measured at

spacecraft YZ plane to the plane that Range: 90.0
maxInTrackViewAn
gle
Y-axis. A positive angle indicates the
sensor is looking forward.

v. 1.1.2 October 2014 32
DIFFERENT FROM
Mean dihedral angle measured at the

spacecraft from the nominal spacecraft
YZ plane to the plane that contains the Range: 90.0
meanInTrackViewA
ground projection of the product Precision: One decimal
ngle
center-line and the spacecraft Y-axis. A point
positive angle indicates the sensor is
looking forward.
Minimum dihedral angle measured at

spacecraft XZ plane to the plane that Range: 90.0
minCrossTrackVie
wAngle
X-axis. A positive angle indicates the
sensor is looking to the right.
Maximum dihedral angle measured at

spacecraft XZ plane to the plane that Range: 90.0
maxCrossTrackVie
wAngle
X-axis. A positive angle indicates the
sensor is looking to the right.
Mean dihedral angle measured at the

spacecraft from the nominal spacecraft
XZ plane to the plane that contains the Range: 90.0
meanCrossTrackVi
ground projection of the product Precision: One decimal
ewAngle
center-line and the spacecraft X-axis. A point
positive angle indicates the sensor is
looking to the right.
The minimum spacecraft elevation

Range: 0.0 to 90.0
minOffNadirViewA angle measured from nadir to the
Precision: One decimal
ngle product center-line as seen from the
place
spacecraft.
The maximum spacecraft elevation

Range: 0.0 to 90.0
maxOffNadirViewA angle measured from nadir to the
ngle product center-line as seen from the
place
spacecraft.

v. 1.1.2 October 2014 33
DIFFERENT FROM
The mean spacecraft elevation angle

Range: 0.0 to 90.0
meanOffNadirView measured from nadir to the product
Angle center-line as seen from the
place
spacecraft.
Mean predicted image quality on the

National Imagery Interpretability
PNIIRS Rating Scale (NIIRS), as computed by 0.0 to 9.0
the General Image Quality Equation
(GIQE).
Estimate of the max cloud-covered

fraction of the product component. .
For mosaic products, this calculation is
based on the intersection of the
0.000 to 1.000
cloudCover polygons contained in the -999.000 if not assessed
-999.000
MOSAIC_CLOSEDPOLYGONS shapefile
with the cloud polygons associated
with that part of the relevent input
imagery.
Method used to resample the image.

NULL
NULL=no resampling kernel
NN
NN=nearest neighbor
CC
CC=cubic convolution Only valid when doing
resamplingKernel MTF
MTF=Modulation Transfer Function radiometric correction.
PS
PS=Pan sharpening
ENH
ENH=Enhanced (Boost) kernel
UserDefined
UserDefined
Source of knowledge of the satellite

positionKnowledge
position. R
Src
R = Refined
Source of knowledge of the satellite

attitudeKnowledge
attitude. R
Src
R = Refined
Orbit revolution number at the time of

revNumber Range: 1 to 99999
exposure.
BEGIN_GROUP=IMAGE_n
Only for map-projected

BEGIN_GROUP=MAP_PROJECTED_PRODUCT (LV2A, LV3 and DEM) and
Stereo OR2A products.

v. 1.1.2 October 2014 34
DIFFERENT FROM
Acquisition time (UTC) of the first line

YYYY-MM-
earliestAcqTime of the earliest image contained in the
DDThh:mm:ss.ddddddZ
product component.
For a single image

Acquisition time (UTC) of the first line
YYYY-MM- product this value will be
latestAcqTime of the latest image contained in the
DDThh:mm:ss.ddddddZ the same as
product component.
earliestAcqTime.
NAD83 uses a GRS 80

Value:
ellipsoid.
WGS84: WE
NAD27 uses a Clarke 1866
Name of the datum specified for the GRS 80: GRS80
ellipsoid.
datumName map projection when the product was NAD83: NAR
Tokyo-Mean uses a Bessel
ordered. NAD27: NAS
1841 ellipsoid.
Tokyo-Mean: TOKYO
Validation should support
Mean Solution
a 2 to 40 character length.
Value:
WGS84/NAD83/GRS80:
Length of semi-major axis of the datum 6378137.0000
semiMajorAxis
ellipsoid, in meters. NAD27: 6378206.4000
Tokyo-M: 6377397.1550
Inverse flattening of the datum

ellipsoid, 1/f. Some useful relationships Value:
between flattening (f), semi-major axis WGS84: 298.257223563
(a), semi-minor axis (b), and NAD83: 298.257222101
inverseFlattening eccentricity squared (e2) are: NAD27: 294.978698200
f = (a - b) / a Tokyo-M: 299.152812800
e2 = (a2 - b2) / a2
= 2f - f2 Precision: 9 decimal places
b = a (1 - f)

v. 1.1.2 October 2014 35
DIFFERENT FROM
Values:
For WGS84 & NAD83:
( 0.000,
0.000,
0.000 );
For NAD27:
X, Y, Z offset of the center of the
( -8.000,
datumOffset reference ellipsoid relative to the origin
160.000,
of the WGS 84 system.
176.000 );
For Tokyo-Mean:
( -128.000,
481.000
664.000 )
UTM
For Japan RCS Zone, valid
Name of the map projection specified State Plane Coordinates
mapProjName zone number range from
when the product was ordered. Japan RCS Zone xx
1 to 19.
Geographic (Lat/Long)
Values:
Integer code for the map projection UTM: 1
mapProjCode
that was used. State Plane Coordinates: 2
Geographic (Lat/Long): 17
Only for UTM and State

Plane projections.
State Plane must have all
Values:
four digits present.
mapZone Zone used for the map projection. UTM: 1 to 60
State Plane: 0101 5105
this should be evaluated
as a whole number from
1-4 digits.
Code indicating the hemisphere used N

mapHemi Only for UTM projection
for the map projection. S
A list of 15 parameters that describe

the particular map projection. The
mapProjParam meaning of each parameter depends Precision: 9 decimal places
on the map projection selected in
mapProjCode.

v. 1.1.2 October 2014 36
DIFFERENT FROM
Precision:
DD = Decimal Degrees
productUnits Units of projected product M = Meters
F = Feet
USF = US Survey Feet
This is equal to ULX unless

Easting of the center of the upper left
originX Precision: 8 decimal places an origin is specified by
pixel of the image.
the customer.
This is equal to ULY unless

Northing of the center of the upper left
originY Precision: 8 decimal places an origin is specified by
pixel of the image.
the customer.
Azimuth angle measured clockwise

from map north to the up direction
at the center of the image. This is a
orientationAngle rotation between raster image and the 0.0
map coordinate systems. Since map-
projected products are always Map-
North up, this is always zero.
Values:
colSpacing: 2 decimal
places for non-geographic
GSD of the image in the column
colSpacing projected products Not applicable to DEMs.
direction.
colSpacing: scientific
notation for geographic
projected products
Values:
rowSpacing: 2 decimal
places for non-geographic
rowSpacing GSD of the image in the row direction. projected products Not applicable to DEMs.
rowSpacing: scientific
notation for geographic
projected products

v. 1.1.2 October 2014 37
DIFFERENT FROM
Standard (level 2A) and

higher products only.
The GSD of a
MultiSpectral image
needs to equal 4x the GSD
of the PAN image. For
example, if the
Range: .1-100.00
productGSD GSD of the product. productGSD of a PAN
image is 0.50, then the
productGSD of the
MultiSpectral image will
be 2.00.
For validation, this shall

range from 0.10 to 99.9.
Indication of the use of edge matching

On Orthorectified (level 3)
edgeMatch for ortho-mosaic products. In other
Off products only.
words, bundle-adjusted.
Indication of the use of color balance On Orthorectified (level 3)

colorBalance
for ortho-mosaic products. Off products only.
postSpacing Post spacing on the DEM, in m. Precision: 2 decimal places Only applicable to DEMs.
Easting of the upper left pixel of the

This value will be equal to
ULX image in the specified datum and map Precision: 8 decimal places
originX.
projection. Includes blackfill.
Northing of the upper left pixel of the

This value will be equal to
ULY image in the specified datum and map Precision: 8 decimal places
originY.
Height above the ellipsoid of the upper

left pixel of the image in the specified
ULH Precision: 2 decimal places
datum and map projection. Includes
blackfill.
Easting of the upper right pixel of the

URX image in the specified datum and map Precision: 8 decimal places
Northing of the upper right pixel of the

URY image in the specified datum and map Precision: 8 decimal places

v. 1.1.2 October 2014 38
DIFFERENT FROM
Height above the ellipsoid of the upper

right pixel of the image in the specified
URH Precision: 2 decimal places
blackfill.
Easting of the lower right pixel of the

LRX image in the specified datum and map Precision: 8 decimal places
Northing of the lower right pixel of the

LRY image in the specified datum and map Precision: 8 decimal places
Height above the ellipsoid of the lower

right pixel of the image in the specified
LRH Precision: 2 decimal places
blackfill.
Easting of the lower left pixel of the

LLX image in the specified datum and map Precision: 8 decimal places
Northing of the lower left pixel of the

LLY image in the specified datum and map Precision: 8 decimal places
Height above the ellipsoid of the lower

left pixel of the image in the specified
LLH Precision: 2 decimal places
blackfill.
Accuracy in location position on

horizontalAccuracy finished DEM product. (1.6 sigma, 90% 0.0 to 200.0 DEM Products only.
circular error)
Accuracy of elevation determination on

verticalAccuracy finished DEM product. (1.6 sigma, 90% 0.0 to 200.0 DEM Products only.
linear error)

v. 1.1.2 October 2014 39
DIFFERENT FROM
Not applicable to DEMs.
Stereo OR2A and

none Standard OR2A Products
Base Elevation use only Base Elevation.
Coarse DEM
Level of the DEM used for the terrain
DEMCorrection Fine DEM Standard (level 2A) and
correction.
Customer Supplied DEM Orthorectified (level 3)
DTED1 DTED2 DTED3 Products use anything
DTED4 DTED5 DTED6 except none.
All other products use

none.
The constant value of the height above Only when

terrainHAE the ellipsoid that was used for the Range: -50000 to 50000 DEMCorrection = Base
terrain correction, in meters. Elevation.
Number of ground control points used

numGCP Range: 0
to create this product.
END_GROUP=MAP_PROJECTED_PRODUCT
END;
6.1.1 Heights Above Ellipsoid (HAE)

The heights above the ellipsoid listed in the band section of the Image Metadata Data (IMD) may vary from the heights
above the ellipsoid listed in the map projection section depending on the datum and the DEM correction used. For
example:
Case 1: DEM = Base Elevation; and datum = WGS-84
In this case the band and the map heights will all be the same, equivalent to the value of terrainHAE.
Case 2: DEM = Base Elevation; but datum WGS-84 (that is, Tokyo Mean)
In this case the map heights will all be the same, and equivalent to the value listed in terrainHAE. However, the heights
listed in the band section may not equal this value (although they may appear to be equal, but differ in decimal places
not shown due to the decimal precision). This difference is due to a conversion using the WGS84 ellipsoid, which
changes the height values slightly.
Case 3: DEM = Coarse/Fine DEM; and datum = WGS-84
In this case, the heights listed in the map section will vary, as will the heights in the band section. However, the
corresponding heights will be equal. For example, ULHAE will be the same as ULH.
Case 4: DEM = Coarse/Fine DEM; but datum WGS-84 (that is, Tokyo Mean)
All heights listed are likely to vary for the same reason listed in Case 2.

v. 1.1.2 October 2014 40
6.1.2 Product Level to Product Type Relationships
Table 6.2 Product Level to Product Type Relationships
PRODUCT LEVEL PRODUCT TYPE MAP ACCURACY
LV1B Basic N/A
LV2A Standard N/A
LV3A Orthorectified 1:50,000
LV3D Orthorectified 1:12,000
LV3E Orthorectified 1:10,000
LV3F Orthorectified 1:5,000
LV3G Orthorectified 1:4,800
LV3X Orthorectified Custom
Stereo 1B Basic Stereo pair N/A
Stereo OR2A Ortho-ready Standard N/A
LV4 Various: DEM or Value-Added Various
6.2 Product Browse File

The product browse file is a compressed JPEG file of the delivered product. The product browse file will be consistent with
the bands ordered for the final product, except for multispectral and 4-band pan-sharpened products for which natural
color browse imagery will be supplied. Figure 6.1 is sample of a natural color-product browse file.
Figure 6.1 Sample Product Browse File

v. 1.1.2 October 2014 41
6.3 Tile Map
Large images are tiled into sub-images and distributed as a group of sub-image files, called tiles. Tiles are not uniform in
size. If the image does not fill the whole tile, blackfill will be added to the top and left of the imagery, but removed from the
bottom and right of the imagery in order to maintain a uniform upper left pixel and reduce tile sizes. Blackfill will only be
present in the upper left corner of a product if a tiling origin is specified that does not correspond to the upper left corner
of the Minimum Bounding Rectangle of the order polygon. If no tiling origin is specified, the upper left corner of the order
poly will be the tiling origin by default. This section describes the PVL-format tile map file and part of the XML file. It
provides the row and column offset for the upper left corner of each tile, relative to the upper left corner of the base image
product. For map-projected image products (Standard and Orthorectified), it also provides the latitude and longitude of the
upper left pixel in the tile. Table 6.3 defines the Tile Map contents.
Table 6.3 Tile Map Contents

DESCRIPTION [DG RANGE / VALUE, IF COMMENTS
DIFFERENT FROM
Identifies the spectral band.

P = Panchromatic,
Multi = all Multi-spectral bands (4 for
QB02, GE01 and 8 for WV02, WV03)
N = NearInfraRed
R = Red,
G = Green P
B = Blue Multi
"RGB" = Red + Green + Blue N N2, RE, Y and C in any band
NRG = Near-IR + Red + Green R combination are available
BGRN = Blue + Green + Red + Near-IR G for WorldView-2 and
RGB, NRG, and BGRN are pan-sharpened B WorldView-3 only.
color images, stored at the RGB
bandId panchromatic spatial resolution. NRG
BGRN For validation, this field is
For WorldView-2 and WorldView-3 N2 constrained by the following
there are also the following bands: RE definition: A-Za-z0-9
N2=NIR2 Y (alphanumeric) plus '-' for
RE=Red Edge C up to 7 (1 to 7) characters
Y=Yellow MS1
C=Coastal MS2
MS1=First 4 bands (N,R,G,B)
MS2=Second 4 bands (N2,RE,Y,C)

spectral band used to create the
product.
numTiles The number of tiles for this product. Range: 1
Size of the X component (columns) of

tileSizeX Range: 1
each tile.

v. 1.1.2 October 2014 42
DIFFERENT FROM
Size of the Y component (lines) of each

tileSizeY Range: 1
tile.
Pixels
Meters Degrees only applicable for
tileUnits Units of tiles
Feet DOQQ products.
Degrees
tileOverlap Overlap of tiles. Range: 0
The following group is repeated for n = 1,,numTiles. That is, once for each of the tiles.
BEGIN_GROUP=TILE_n
Example:
filename Filename of the tile. 10JUL04165542-P2AS-
052380211010_01_P001.NTF
Column offset of the upper left pixel of

this tile, relative to the upper left pixel
of the base image.
Range:
ULColOffset [This field is calculated as:
0 to ((maxCol-1)*tileSizeX)
(columnNum-1)*tileSizeX
The columnNum can be found in the
filename. For example, 2 in R1C2.]
Row offset of the upper left pixel of this

tile, relative to the upper left pixel of the
base image.
Range:
ULRowOffset [This field is calculated as:
0 to ((maxRows-1)*tileSizeY)
(rowNum-1) * tileSizeY
The rowNum can be found in the
Column offset of the upper right pixel of

of the base image.
Range:
[This field is calculated as:
URColOffset (tileSizeX-1) to
MIN((columnNum*tileSizeX),
(maximumProductTileSizeX-1)
maximumProductTtileSizeX)-1
Row offset of the upper right pixel of

Range:
URRowOffset this tile, relative to the upper left pixel
0 to ((maxRows-1)*tileSizeY)
of the base image.

v. 1.1.2 October 2014 43
DIFFERENT FROM

(rowNum-1)*tileSizeY
Column offset of the lower right pixel of

of the base image.
Range:
LRColOffset (tileSizeX-1) to
MIN((columnNum*tileSizeX),
(maximumProductTileSizeX-1)
maximumProductTtileSizeX)-1
Row offset of the lower right pixel of this

base image.
Range:
LRRowOffset (tileSizeY-1) to
MIN((rowNum*tileSizeY),
(maximumProductTileSizeY-1)
maximumProductTtileSizeY)-1
Column offset of the lower left pixel of

of the base image.
Range:
LLColOffset [This field is calculated as:
0 to ((maxCol-1)*tileSizeX)
(columnNum -1)*tileSizeX
Row offset of the lower left pixel of this

base image.
Range:
LLRowOffset (tileSizeY-1) to
MIN(rowNum*tileSizeY),
(maximumProductTileSizeY-1)
maximumProductTtileSizeY)-1
The geodetic longitude of the center of Range: 180.00000000

ULLon
the upper left pixel in the tile. Precision: 8 decimal places
The geodetic latitude of the center of Range: 90.00000000

ULLat
the upper left pixel in the tile. Precision: 8 decimal places

v. 1.1.2 October 2014 44
DIFFERENT FROM

URLon
the upper right pixel in the tile. Precision: 8 decimal places

URLat
the upper right pixel in the tile. Precision: 8 decimal places

LRLon
the lower right pixel in the tile. Precision: 8 decimal places

LRLat
the lower right pixel in the tile. Precision: 8 decimal places

LLLon
the lower left pixel in the tile. Precision: 8 decimal places
The geodetic latitude of the center of

Range: 90.00000000
LLLat the lower left pixel in the tile, in
degrees.
Easting of the center of the upper left

pixel of the tile in the specified map Value:
ULX
projection, datum, and units of the Precision: 8 decimal places
product.
Northing of the center of the upper left

pixel of the tile in the specified map
ULY Precision: 8 decimal places
projection, datum, and units of the
product.
Easting of the center of the upper right

URX Precision: 8 decimal places
product.
Northing of the center of the upper right

URY Precision: 8 decimal places
product.
Easting of the center of the lower right

LRX Precision: 8 decimal places
product.
Northing of the center of the lower right

LRY Precision: 8 decimal places

v. 1.1.2 October 2014 45
DIFFERENT FROM

product.
Easting of the center of the lower left

LLX Precision: 8 decimal places
product.
Northing of the center of the lower left

LLY Precision: 8 decimal places
product.
END_GROUP=TILE_n
END;
6.4 Rational Polynomial Coefficients

This section describes the content of the PVL-format RPC00B file and the corresponding part of the XML file. It contains the
coefficients for Rapid Positioning Capability, also called Rational Polynomial Coefficients (RPC). This is a mathematical
mapping from object space coordinates to image space coordinates. This mapping includes non-ideal imaging effects, such
as lens distortion, light aberration, and atmospheric refraction.
RPC00Bs express the normalized column and row values in an image, (cn, rn), as a ratio of polynomials of the normalized
geodetic latitude, longitude, and height, (P, L, H). Normalized values are used instead of actual values in order to minimize
numerical errors in the calculation. The scales and offset of each parameter are selected so that all normalized values fall in
the range [-1, 1]. The normalization used is as follows:
P = (Latitude - LAT_OFF) / LAT_SCALE
L = (Longitude - LONG_OFF) / LONG_SCALE
H = (Height - HEIGHT_OFF) / HEIGHT_SCALE
rn = (ROW - LINE_OFF) / LINE_SCALE
cn = (Column - SAMP_OFF) / SAMP_SCALE
Each polynomial is up to third order in (P, L, H), having as many as 20 terms. The rational functions are:
20 20

i =1
LINE _ NUM _ COEFi p i ( P, L, H ) SAMP _ NUM _ COEF p ( P, L, H )
i =1
i i
rn = 20
and cn = 20
LINE _ DEN _ COEF p ( P, L, H )

i =1
i i SAMP _ DEN _ COEF p ( P, L, H )
i =1
i i
LINE_NUM_COEF, LINE_DEN_COEF, SAMP_NUM_COEF, and SAMP_DEN_COEF are 20-term vectors of coefficients that are
given in the RPC00B file. p(P,L,H) is a 20-term vector with the following terms:

v. 1.1.2 October 2014 46
Table 6.4 RPC Terms
I pi (P,L,H) I pi (P,L,H)
1 1 11 PLH
3
2 L 12 L
2
3 P 13 LP
2
4 H 14 LH
2
5 LP 15 LP
3
6 LH 16 P
2
7 PH 17 PH
2 2
8 L 18 LH
2 2
9 P 19 PH
2 3
10 H 20 H
For example, for a generic set of polynomial coefficients Ci, the corresponding 20-term cubic polynomial has the form:
f(P, L, H) = C1 + C2 L + C3 P + C4 H + C5 LP + C6 LH + C7 PH + C8 L2 + C9 P2 + C10 H2 + C11 PLH + C12 L3 + C13 LP2 + C14 LH2 + C15 L2P +
C16P3 + C17PH2 + C18L2H + C19P2H + C20H3
The image coordinates are expressed in pixels. The ground coordinates are latitude and longitude in decimal degrees, and
geodetic elevations (height above the ellipsoid) in meters.
There is only one set of coefficients for Basic, Stereo, and Standard products since their multi-spectral bands are co-
registered and the images are geometrically continuous within each band. The range of values for each numeric parameter
is as specified in The Compendium of Controlled Extensions (CE) for the National Imagery Transmission Format (NITF);
NIMA document STDI-0002, Version 2.1, 16 November 2000. Out-of-range coefficients are set to zero. Table 6.5 defines the
RPC00B contents.
Table 6.5 RPC00B Contents

DESCRIPTION [DG RANGE / VALUE, COMMENTS
IF DIFFERENT FROM
satId Satellite Id. QB02, WV01, WV02, GE01,

WV03
Identifies the spectral band. P N2, RE, Y and C in any

bandId Multi band combination are
P = Panchromatic, N available for

v. 1.1.2 October 2014 47
IF DIFFERENT FROM
Multi = all Multi-spectral bands (4 for R WorldView-2 and

QB02, GE01 and 8 for WV02, WV03), G WorldView-3 only.
N = NearInfraRed, B
R = Red, RGB
G = Green, NRG
B = Blue, BGRN
"RGB" = Red + Green + Blue, N2
"NRG" = Near-IR + Red + Green, RE
BGRN = Blue + Green + Red + Near- Y
IR. C
RGB, NRG, and BGRN are pan- MS1
sharpened color images, stored at the MS2
panchromatic spatial resolution.
For WorldView-2 and WorldView-3

there are also the following bands,
N2=NIR2,
RE=Red Edge,
Y=Yellow,
C=Coastal
MS1
MS2

spectral band used to create the
product.
Identification of the specification

which defines the RPC implementation
SpecId RPC00B
used for generating and/or
interpreting the coefficients
Standard (level 2A)

and Orthorectified
BEGIN_GROUP = IMAGE
(level 3) products
only.
Bias error. 68% non time-varying error Range: 0.00 9999.99

errBias
estimate for correlated images. Precision: 2 decimal places
Random error. 68% time-varying error Range: 0.00 9999.99

errRand
estimate for correlated images. Precision: 2 decimal places
lineOffset LINE_OFFSET. Range: 0 999999
sampOffset SAMP_OFFSET. Range: -9999 to 99999

v. 1.1.2 October 2014 48
IF DIFFERENT FROM
Range: 90.0000
latOffset LAT_OFFSET.
Range: 180.0000
longOffset LONG_OFFSET.
heightOffset HEIGHT_OFFSET. Range: 9999
lineScale LINE_SCALE Range: 1 999999
sampScale SAMP_SCALE Range: 1 99999
Range: 90.0000
latScale LAT_SCALE
Range: 180.0000
longScale LONG_SCALE
heightScale HEIGHT_SCALE Range: 9999
LINE_NUM_COEF. Twenty coefficients

lineNumCoef for the polynomial in the numerator of Range: 9.999999 * 10 9
the rn equation.
LINE_DEN_COEF. Twenty coefficients

lineDenCoef for the polynomial in the denominator Range: 9.999999 * 10 9
of the rn equation.
SAMP_NUM_COEF. Twenty
sampNumCoef coefficients for the polynomial in the Range: 9.999999 * 10 9
numerator of the cn equation.
SAMP_DEN_COEF. Twenty coefficients

sampDenCoef for the polynomial in the denominator Range: 9.999999 * 10 9
of the cn equation.
END;
6.5 Product Component XML File

The XML file contains the same information as the combined product component level README, Licensing, Image
Metadata, Tile Map, and RPC00B files, except in XML format. For Basic Imagery Products, the attitude, ephemeris, and
geometric calibration file are included as well. One Product Component XML file is provided for each product component of
each delivery within the product component subdirectory.
Listed below is an example of this file for a Bundle Standard Imagery Product.

v. 1.1.2 October 2014 49
<?xml version="1.0" encoding="UTF-8" ?>
- <README>
<VERSION>AA</VERSION>
<COPYRIGHT>Use, duplication or disclosure by the government is subject to the
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software Clause contained in D.F.A.R.S. 252.227-7013, and subparagraphs (c)(1) and
(2) of the Commercial Computer Software-Restricted Rights contained in 48 C.F.R. 52.227-19.
Contractor/manufacturer is DigitalGlobe, Incorporated at 1601 Dry Creek Drive, Suite 260,
Longmont, CO 80503-6493. Copyright YYYY DigitalGlobe Incorporated, Longmont CO USA 80503-
6493 DigitalGlobe and the DigitalGlobe logo are trademarks of DigitalGlobe, Incorporated.
The use and/or dissemination of this data and/or of any product in any way derived there
from are restricted. Unauthorized use and/or dissemination is prohibited. DigitalGlobe WWW
Reference: http://www.digitalglobe.com</COPYRIGHT>
<MEDIACREATIONDATE>2006-01-18T23:03:43.492Z</MEDIACREATIONDATE>
<ORDERNO>005366076010_01</ORDERNO>
- <FILELIST>
<FILE>005366076010_01_README.TXT</FILE>
<FILE>005366076010_01_README.XML</FILE>
<FILE>005366076010_01_LAYOUT.JPG</FILE>
<FILE>GIS_FILES/005366076010_01_ORDER_SHAPE.shx</FILE>
<FILE>GIS_FILES/005366076010_01_ORDER_SHAPE.shp</FILE>
<FILE>GIS_FILES/005366076010_01_ORDER_SHAPE.dbf</FILE>
<FILE>GIS_FILES/005366076010_01_PRODUCT_SHAPE.shx</FILE>
<FILE>GIS_FILES/005366076010_01_PRODUCT_SHAPE.shp</FILE>
<FILE>GIS_FILES/005366076010_01_PRODUCT_SHAPE.dbf</FILE>
<FILE>GIS_FILES/005366076010_01_STRIP_SHAPE.shx</FILE>
<FILE>GIS_FILES/005366076010_01_STRIP_SHAPE.shp</FILE>
<FILE>GIS_FILES/005366076010_01_STRIP_SHAPE.dbf</FILE>
<FILE>GIS_FILES/005366076010_01_TILE_SHAPE.shx</FILE>
<FILE>GIS_FILES/005366076010_01_TILE_SHAPE.shp</FILE>
<FILE>GIS_FILES/005366076010_01_TILE_SHAPE.dbf</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001_README.TXT</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.IMD</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.EPH</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.ATT</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.TIL</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.GEO</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.RPB</FILE>
<FILE>005366076010_01_P001_MUL/CIVIL_ORG_EULA_SERVICES.TXT</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.XML</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001-BROWSE.JPG</FILE>
<FILE>005366076010_01_P001_MUL/02DEC15023811-M1BS-005366076010_01_P001.TIF</FILE>
<FILE>005366076010_01_P001_PAN/CIVIL_ORG_EULA_SERVICES.TXT</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001_README.TXT</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.IMD</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.EPH</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.ATT</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.TIL</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.GEO</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.RPB</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.XML</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001-BROWSE.JPG</FILE>
<FILE>005366076010_01_P001_PAN/02DEC15023811-P1BS-005366076010_01_P001.TIF</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002_README.TXT</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.IMD</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.EPH</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.ATT</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.TIL</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.GEO</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.RPB</FILE>
<FILE>005366076010_01_P002_MUL/CIVIL_ORG_EULA_SERVICES.TXT</FILE>

v. 1.1.2 October 2014 50
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.XML</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002-BROWSE.JPG</FILE>
<FILE>005366076010_01_P002_MUL/03AUG09021839-M1BS-005366076010_01_P002.TIF</FILE>
<FILE>005366076010_01_P002_PAN/CIVIL_ORG_EULA_SERVICES.TXT</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002_README.TXT</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.IMD</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.EPH</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.ATT</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.TIL</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.GEO</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.RPB</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.XML</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002-BROWSE.JPG</FILE>
<FILE>005366076010_01_P002_PAN/03AUG09021839-P1BS-005366076010_01_P002.TIF</FILE>
</FILELIST>
<AREADESCRIPTION>PS_WV_02</AREADESCRIPTION>
<DGORDERNO>005366076</DGORDERNO>
<DGORDERITEMNO>005366076010</DGORDERITEMNO>
<CUSTOMERORDERNO>PS_02 1B+ BA XML Taipei</CUSTOMERORDERNO>
<CUSTOMERORDERITEMNO>40009</CUSTOMERORDERITEMNO>
<COLLECTIONSTART>2002-12-15T02:38:08.618201Z</COLLECTIONSTAR>
<COLLECTIONSTOP>2003-08-09T02:18:48.385340Z</COLLECTIONSTOP>
<COUNTRYCODE>TW</COUNTRYCODE>
<NUMBEROFLOOKS>1</NUMBEROFLOOKS>
<CLOUDCOVER>-999.0</CLOUDCOVER>
<NWLAT>25.12000000</NWLAT>
<NWLONG>121.60000000</NWLONG>
<SELAT>25.04000000</SELAT>
<SELONG>121.73000000</SELONG>
</README>
6.6 Manifest File

The manifest file outlines the directory structure for products delivered by FTP. Below is an example of the manifest file
delivered for a Standard Pansharpened Imagery product.
./005510916010_01.MAN
./005510916010_01
./005510916010_01/005510916010_01_README.TXT
./005510916010_01/005510916010_01_README.XML
./005510916010_01/005510916010_01_LAYOUT.JPG
./005510916010_01/GIS_FILES
./005510916010_01/GIS_FILES/005510916010_01_ORDER_SHAPE.shx
./005510916010_01/GIS_FILES/005510916010_01_ORDER_SHAPE.shp
./005510916010_01/GIS_FILES/005510916010_01_ORDER_SHAPE.dbf
./005510916010_01/GIS_FILES/005510916010_01_PRODUCT_SHAPE.shx
./005510916010_01/GIS_FILES/005510916010_01_PRODUCT_SHAPE.shp
./005510916010_01/GIS_FILES/005510916010_01_PRODUCT_SHAPE.dbf
./005510916010_01/GIS_FILES/005510916010_01_STRIP_SHAPE.shx
./005510916010_01/GIS_FILES/005510916010_01_STRIP_SHAPE.shp
./005510916010_01/GIS_FILES/005510916010_01_STRIP_SHAPE.dbf
./005510916010_01/GIS_FILES/005510916010_01_TILE_SHAPE.shx
./005510916010_01/GIS_FILES/005510916010_01_TILE_SHAPE.shp
./005510916010_01/GIS_FILES/005510916010_01_TILE_SHAPE.dbf
./005510916010_01/005510916010_01_P001_PSH
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-
005510916010_01_P001_README.TXT
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-005510916010_01_P001.IMD
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-005510916010_01_P001.TIL
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-005510916010_01_P001.RPB
./005510916010_01/005510916010_01_P001_PSH/COMMERCIAL.TXT
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-005510916010_01_P001.XML

v. 1.1.2 October 2014 51
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS-005510916010_01_P001-
BROWSE.JPG
./005510916010_01/005510916010_01_P001_PSH/03MAR13174755-S2AS_R1C1-005510916010_01_P001.TIF
6.7 Stereo File

This file is provided only for Stereo Pair Imagery products, and describes information about individual stereo models. The
stereo file contains three angular measures of convergent stereo imaging geometry: the convergence angle, the asymmetry
angle, and the bisector elevation angle (BIE). These measure the geometrical relationship between two rays that intersect
at a common ground point, one from the fore image and one from the aft image. These intersecting rays define a plane,
called the convergence plane. The convergence angle is the angle between the two rays in the convergence plane. The
asymmetry angle is the angle between the ray bisector (also in the convergence plane), and the projection of a vertical from
the ground point onto the convergence plane. The BIE is the elevation of the bisector. That is, the angle from the horizontal
plane containing the ground point to the bisector. Each angle is computed at a ground target point near the beginning of
the stereo overlap, and at another point near the end of the stereo overlap. Table 6.6 defines the Stereo File contents.
Figure 6.2 Stereo Geometry Angles

Stereo geometry is often described in terms of convergence angle and asymmetry angle at a ground point defined by radius
vector, as illustrated in Figure 6.2. These angles are measured in the plane formed by the two lines of sight (one for each
image) to the ground point.

v. 1.1.2 October 2014 52
Table 6.6 Stereo File Contents

IF DIFFERENT FROM
numPair Number of stereo pairs in this file. 1
The following group is repeated for n = 1,,numPair (for all stereo pairs).
BEGIN_GROUP=STEREO_PAIR_n
For products produced by

Image file name of the first image (image DigitalGlobe,
firstId
acquired at the earlier time) of a stereo pair. this name will follow the standard
product naming conventions.
Image file name of the second image of the

secondId See firstID.
stereo pair.
Fractional overlap: overlap area, measured on

overlap the ground, divided by the ground area of the 0.00 to 1.00
second image.
Geodetic latitude of the upper left corner of the

Range: 90.000000
ULLat minimum-bounding rectangle that covers the
Precision: Six decimal places
stereo model.
Geodetic longitude of the upper left corner of

Range: 180.000000
ULLon the minimum-bounding rectangle that covers
the stereo model.
Geodetic latitude of the lower right corner of the

Range: 90.000000
LRLat minimum-bounding rectangle that covers the
stereo model.
Geodetic longitude of the lower right corner of

Range: 180.000000
LRLon the minimum-bounding rectangle that covers
the stereo model.
Beginning convergence angle. This is measured Range: 0.00 to 180.00

B_Conv
at the first lines of the stereo overlap. Precision: Two decimal places
Ending convergence angle. This is measured at Range: 0.00 to 180.00

E_Conv
the last lines of the stereo overlap. Precision: Two decimal places
Beginning asymmetry angle. This is measured at Range: 0.00 to 90.00

B_Asym
the first lines of the stereo overlap. Precision: Two decimal places

v. 1.1.2 October 2014 53
IF DIFFERENT FROM
Ending asymmetry angle. This is measured at the Range: 0.00 to 90.00

E_Asym
last lines of the stereo overlap. Precision: Two decimal places
Beginning BIE less convergence angle of stereo

Range: -90.00 to 90.00
B_BIE mate. This is measured at the first lines of the
Precision: Two decimal places
stereo overlap.
Ending BIE less convergence angle of stereo

Range: -90.00 to 90.00
E_BIE mate. This is measured at the last lines of the
Precision: Two decimal places
stereo overlap.
END_GROUP=STEREO_PAIR_n
END;

v. 1.1.2 October 2014 54
Appendix A: Example PVL Format
The following is an example PVL format. It is for illustration purposes only.
version = "21.0"; /* ISD Version */
generationTime = 2003-12-18T17:54:28.000000Z;
productOrderId = "T-111-C";
productCatalogId = 2030011234567801;
imageDescriptor = "Standard2A";
bandId = "P";
panSharpenAlgorithm = "None";
numRows = 22472;
numColumns = 14384;
productLevel = "LV2A";
productType = Standard;
numberOfLooks = 1;
radiometricLevel = "Corrected";
radiometricEnhancement = "Off";
bitsPerPixel = 8;
compressionType = "None";
BEGIN_GROUP = BAND_P
ULLon = -158.26477950;
ULLat = 21.59936003;
ULHAE = 0.00;
URLon = -158.13533250;
URLat = 21.59936003;
URHAE = 0.00;
LRLon = -158.13533250;
LRLat = 21.39712529;
LRHAE = 0.00;
LLLon = -158.26477950;
LLLat = 21.39712527;
LLHAE = 0.00;
absCalFactor = 4.734886e-01;
effectiveBandwidth = 3.9800e-01;
END_GROUP = BAND_P
outputFormat = "GeoTIFF";
BEGIN_GROUP = IMAGE_1
satId = "QB02";
mode = FullSwath;
CatId = "101001000173E700";
minCollectedRowGSD = 0.618;
maxCollectedRowGSD = 0.621;
meanCollectedRowGSD = 0.619;
minCollectedColGSD = 0.629;
maxCollectedColGSD = 0.630;
meanCollectedColGSD = 0.629;
meanCollectedGSD = 0.624;
rowUncertainty = 166.70;
colUncertainty = 292.81;
minSunAz = 155.3;
maxSunAz = 156.8;
meanSunAz = 155.8;
minSunEl = 43.2;
maxSunEl = 44.2;
meanSunEl = 43.7;
minSatAz = 119.7;
maxSatAz = 119.9;
meanSatAz = 119.8;
minSatEl = 80.0;
maxSatEl = 82.0;
meanSatEl = 81.1;
minInTrackViewAngle = -3.4;

v. 1.1.2 October 2014 55
maxInTrackViewAngle = -1.4;
meanInTrackViewAngle = -2.4;
minCrossTrackViewAngle = 8.6;
maxCrossTrackViewAngle = 15.6;
meanCrossTrackViewAngle = 11.8;
minOffNadirViewAngle = 9.2;
maxOffNadirViewAngle = 17.2;
meanOffNadirViewAngle = 12.2;
PNIIRS = 3.8;
cloudCover = 0.000;
imageQuality = "Fair";
TDILevel = 13;
positionKnowledgeSrc = "R";
attitudeKnowledgeSrc = "R";
revNumber = 6279;
END_GROUP = IMAGE_1
BEGIN_GROUP = MAP_PROJECTED_PRODUCT
earliestAcqTime = 2002-11-30T21:06:27.161677Z;
latestAcqTime = 2002-11-30T21:06:27.161677Z;
datumName = "INTERNATIONAL 1924";
semiMajorAxis = 6378388.0000;
inverseFlattening = 297.000000000;
datumOffset = (
0.000,
0.000,
0.000 );
mapProjName = "Geographic (Lat/Long)";
mapProjCode = 17;
mapProjParam = (
6366197.723675813,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000,
0.000000000 );
productUnits = "DD";
originX = -158.26477950;
originY = 21.59992350;
orientationAngle = 0.0;
colSpacing = 0.00;
rowSpacing = 0.00;
productGSD = 0.60;
edgeMatch = "Off";
colorBalance = "On";
ULX = -158.26477950;
ULY = 21.59992350;
ULH = 0.00;
URX = -158.13533250;
URY = 21.59992350;
URH = 0.00;
LRX = -158.13533250;
LRY = 21.39768450;
LRH = 0.00;
LLX = -158.26477950;
LLY = 21.39768450;
LLH = 0.00;

v. 1.1.2 October 2014 56
DEMCorrection = "none";
numGCP = 4;
END_GROUP = MAP_PROJECTED_PRODUCT
END; /* END OF MODULE */

v. 1.1.2 October 2014 57
Appendix B: Example XML Format
The following is an example XML format. It is for illustration purposes only.
<?xml version="1.0" encoding="UTF-8" ?>
<version>21.0</version>
<generationTime>2003-12-18T17:54:28.000000Z</generationTime>
<productOrderId>T-111-C</productOrderId>
<productCatalogId> = 2030011234567801 </productCatalogId>
<imageDescriptor>Standard2A</imageDescriptor>
<bandId>P</bandId>
<panSharpenAlgorithm>None</panSharpenAlgorithm>
<numRows>22472 </numRows>
<numColumns>14384</numColumns>
<productLevel>LV2A </productLevel>
<productType>Standard </productType>
<numberOfLooks>1 </numberOfLooks>
<radiometricLevel>Corrected</radiometricLevel>
<radiometricEnhancement>Off</radiometricEnhancement>
<bitsPerPixel>8</bitsPerPixel>
<compressionType>None</compressionType>
<Band_P>
<ULLon>-158.26477950</ULLon>
<ULLat> 21.59936003</ULLat>
<ULHAE> 0.00</ULHAE>
<URLon> -158.13533250</URLon>
<URLat> 21.59936003</URLat>
<URHAE> 0.00</URHAE>
<LRLon> -158.13533250</LRLon>
<LRLat> 21.39712529</LRLat>
<LRHAE> 0.00</LRHAE>
<LLLon> -158.26477950</LLLon>
<LLLat> 21.39712527</LLLat>
<LLHAE> 0.00</LLHAE>
<absCalFactor> 4.734886e-01</absCalFactor>
<effectiveBandwidth> 3.9800e-01 <effectiveBandwidth>
</Band_P>
<outputFormat>GeoTIFF</outputFormat>
<Image_List>
<satId>QB02</satId>
<mode>FullSwath</mode>
<catId>101001000173E700</catId>
<minCollectedRowGSD>0.618</minCollectedRowGSD>
<maxCollectedRowGSD>0.621</maxCollectedRowGSD>
<meanCollectedRowGSD>0.619</meanCollectedRowGSD>
<minCollectedColGSD>0.629</minCollectedColGSD>
<maxCollectedColGSD>0.630</maxCollectedColGSD>
<meanCollectedColGSD>0.629</meanCollectedColGSD>
<meanCollectedGSD>0.624</meanCollectedGSD>
<rowUncertainty>166.70</rowUncertainty>
<colUncertainty>292.81</colUncertainty>
<minSunAz>155.3</minSunAz>
<maxSunAz>156.8</maxSunAz>
<meanSunAz>155.8</meanSunAz>
<minSunEl>43.2</minSunEl>
<maxSunEl>44.2</maxSunEl>
<meanSunEl>43.7</meanSunEl>
<minSatAz>119.7</minSatAz>
<maxSatAz>119.9<maxSatAz>
<meanSatAz>119.8<meanSatAz>
<minSatEl>80.0</minSatEl>
<maxSatEl>82.0</maxSatEl>

v. 1.1.2 October 2014 58
<meanSatEl>81.1</maxSatEl>
<minInTrackViewAngle>-3.4</minInTrackViewAngle>
<maxInTrackViewAngle>-1.4</maxInTrackViewAngle>
<meanInTrackViewAngle>-2.4</meanInTrackViewAngle>
<minCrossTrackViewAngle>8.6</minCrossTrackViewAngle>
<maxCrossTrackViewAngle>15.6<maxCrossTrackViewAngle>
<meanCrossTrackViewAngle>11.8<meanCrossTrackViewAngle>
<minOffNadirViewAngle>9.2</minOffNadirViewAngle>
<maxOffNadirViewAngle>17.2</maxOffNadirViewAngle>
<meanOffNadirViewAngle>12.2<meanOffNadirViewAngle>
<PNIIRS>3.8</PNIIRS>
<cloudCover>0.000</cloudCover>
<imageQuality>Fair</imageQuality>
<TDILevel>13</TDILevel>
<positionKnowledgeSrc>R</positionKnowledgeSrc>
<attitudeKnowledgeSrc>R</attitudeKnowledgeSrc>
<revNumber>6279</revNumber>
</Image_List>
<mapProjected>
<earliestAcqTime>2002-11-30T21:06:27.161677Z</earliestAcqTime>
<latestAcqTime>2002-11-30T21:06:27.161677Z</latestAcqTime>
<datumName>INTERNATIONAL 1924</datumName>
<semiMajorAxis>6378388.0000</semiMajorAxis>
<inverseFlattening>297.000000000</inverseFlattening>
<datumOffset>
<offset>0.000</offset>
</datumOffset>
<mapProjName>"Geographic (Lat/Long)" </mapProjName>
<mapProjCode>17</mapProjCode>
<mapProjParam>
<param> 6366197.723675813</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
<param> 0.000000000</param>
</mapProjParam>
<productUnits>"DD"</productUnits>
<originX>-158.26477950</originX>
<originY>21.59992350</originY>
<orientationAngle>0.0</orientationAngle>
<colSpacing>0.00</colSpacing>
<rowSpacing>0.00</rowSpacing>
<productGSD>0.60</productGSD>
<edgeMatch>"Off"</edgeMatch>
<colorBalance>"On"</colorBalance>
<ULX> -158.26477950</ULX>
<ULY> 21.59992350</ULY>
<ULH> 0.00</ULH>
<URX> -158.13533250</URX>
<URY> 21.59992350</URY>
<URH> 0.00</URH>
<LRX>-158.13533250</LRX>
<LRY>21.39768450</LRY>

v. 1.1.2 October 2014 59
<LRH>0.00</LRH>
<LLX>-158.26477950</LLX>
<LLY>21.39768450</LLY>
<LLH> 0.00</LLH>
<DEMCorrection>"none"</DEMCorrection>
<numGCP>4</numGCP>
</mapProjected>

v. 1.1.2 October 2014 60
Appendix C: Example Tile Map File
The following is an example tile map format. It is for illustration purposes only.
bandId = "RGB";
numTiles = 12;
tileSizeX = 8192;
tileSizeY = 8192;
tileUnits = "Pixels";
tileOverlap = 0;
BEGIN_GROUP = TILE_1
filename = "02DEC15023809-S2AS_R1C1-005500420010_01_P001.NTF";
ULColOffset = 0;
ULRowOffset = 0;
URColOffset = 8191;
URRowOffset = 0;
LRColOffset = 8191;
LRRowOffset = 8191;
LLColOffset = 0;
LLRowOffset = 8191;
ULLon = 121.50000270;
ULLat = 25.24998690;
URLon = 121.54423410;
URLat = 25.24998690;
LRLon = 121.54423410;
LRLat = 25.20575550;
LLLon = 121.50000270;
LLLat = 25.20575550;
ULX = 121.50000270;
ULY = 25.24998690;
URX = 121.54423410;
URY = 25.24998690;
LRX = 121.54423410;
LRY = 25.20575550;
LLX = 121.50000270;
LLY = 25.20575550;

v. 1.1.2 October 2014 61
Glossary
AOI
Area of Interest. The area on the Earth that you want to view.
Bilinear Interpolation
Bilinear interpolation uses the value of the four nearest cell centers to determine the value on the output raster. The
new value is a weighted average of these four values, adjusted to account for their distance from the center of the
output cell. The result is a smoother-looking surface than provided by nearest neighbor.
Bicubic Interpolation
Bicubic interpolation combines data points on a two-dimensional grid. This method outputs the smoothest surface of
all interpolation methods.
CE
Circular Error.
CE90
Circular Error at 90% confidence. Indicates that the actual location of an object is represented on the image within the
stated accuracy for 90% of the points.
CIR
Color Infrared.
COTS
Commercial-Off-The-Shelf.
DEM
See Digital Elevation Model.
Digital Elevation Model (DEM)
A digital model of terrain relief, usually derived from stereo imagery. A DEM is used to remove terrain distortions from
Orthorectified Imagery products.
DRA
Dynamic Range Adjustment. An optional post-processing feature that enhances the visual interpretability of the image.
DTED
Digital Terrain Elevation Data.
ECF
Earth Centered Fixed.
FTP
File Transfer Protocol.
GCP
See Ground Control Point.

v. 1.1.2 October 2014 62
GE01
GeoEye-1 Satellite.
Geographic Projection
Maps longitudes as straight vertical lines and latitudes as straight horizontal lines all spaced out consistently for
constant intervals.
GeoTIFF format
Georeferenced tagged image file format. A GeoTIFF file is a TIFF file that is embedded with geographic data tags.
Ground Control Point (GCP)
A known geographic coordinate location on the ground. A GCP can be collected from ground survey or maps (Primary
GCP), or derived via triangulation of primary GCPs (Secondary GCP). GCPs can be planimetric (x, y; latitude, longitude)
or vertical (x, y, z; latitude, longitude, elevation).
Ground Sample Distance (GSD)
The size of a single pixel as measured on the ground. This is also referred to as resolution.
GSD
See Ground Sample Distance.
Image Support Data (ISD)
A set of files which contain all the necessary data necessary to use and process Imagery Products. These files can be
viewed as a collection point for all ancillary data that is expected to be useful to a customer.
ISD
See Image Support Data.
JPEG2000 format
The JPEG2000 format is a JPEG format that was introduced in the year 2000. It has considerable advantages over basic
JPEG format including error resilience and progressive transmission.
LE
Linear Error.
LE90
Linear Error at 90 percent confidence. Indicates that the actual elevation of an object is represented within the stated
accuracy for at least 90% of elevation posts.
MBR
Minimum-bounding rectangle.
Metadata
Ancillary data that describes and defines the imagery product. DigitalGlobe provides metadata in a set of Image
Support Data files.
Mosaic
The process of digitally assembling images to create contiguous large-area coverage.

v. 1.1.2 October 2014 63
MrSid format
Multi-Resolution Seamless Image Database. This format compresses large raster images while maintaining the image
quality.
MS
See Multispectral.
Multispectral
Imagery with data recorded in multiple discrete spectral bands. Imagery collected in four or eight ranges of
wavelengths in the electromagnetic spectrum.
Nadir
The point on the ground vertically beneath the sensor.
National Imagery Transmission Format
See NITF format.
Nearest Neighbor Interpolation
Uses the value of the closest point and disregards all other values, yielding a piecewise-constant interpolant.
NED
National Elevation Dataset DEM. NED DEM is available in the United States. Accuracy in Alaska is not as high as in the
contiguous United States.
NIIRS
National Image Interpretability Rating Scale.
NIR1
Near Infrared 1.
NIR2
Near Infrared 2.
NITF format
National Imagery Transmission Format. A United States Department of Defense standard for transmitting and storing
digital imagery.
NRG
Near-Infrared, Red, Green.
Off-nadir Angle
The angle between nadir and the point on the ground that the sensor is pointing. Off-nadir angle can be measured in
the along-track (forward) direction or across-track (sideways) direction.
Orthorectification
The process of removing image distortions introduced by the collection geometry and variable terrain, and re-sampling
the imagery to a specified map projection. Also referred to as ortho-correction or terrain correction.

v. 1.1.2 October 2014 64
Pan/Panchromatic
A wide spectral band which is comprised of reflected light in the visible spectrum (blue, green, red and NIR). It is
displayed as a black and white image.
Pan-Sharpened
Processed used to colorize imagery by fusing multispectral and panchromatic bands.
Photogrammetry
The art, science, and technology of obtaining reliable information about physical objects and the environment through
the process of recording, measuring, and interpreting photographic images and patterns of electromagnetic radiant
imagery.
Pixel
Picture element. The smallest element comprising a digital image.
PNIIRS
Predicted National Image Interpretability Rating Scale.
Product Framing
The manner in which Imagery Products are delivered. Products are either Scene-based or Area-based.
PVL
Physical Volume Library.
QB02
QuickBird satellite.
Radiometric Correction
The correction of variations in data that are not caused by the object or scene being scanned, such as non-responsive
detectors, scanner inconsistencies, and atmospheric interference.
Remote Sensing
The measurement or acquisition of data about an object by an instrument not in contact with the object. Satellite
imagery, aerial photography, and radar are all types of remote sensing.
Resolution
The resampled image pixel size derived from GSD.
RGB
Red, Green, Blue.
RMSE
Root Mean Square Error.
RPC
Rational Polynomial Coefficient camera model. RPCs provide the camera geometry obtained at the time of the image
collection.

v. 1.1.2 October 2014 65
Scale
The ratio of distance on a map as related to the true distance on the ground. Products with a larger scale have higher
geometric accuracies than products with a smaller scale.
Seamlines
Seamlines are the lines at which two separate images overlap. These overlapping images can be blended along the
seamline to show a more uniform image.
Sensor Azimuth
The azimuth of the sensor measured from the target.
Sensor Correction
The correction of variations in data that are caused by variations in sensor geometry, attitude, and ephemeris.
Spatial Mosaic
The assembly of multiple scenes, each of which shows a portion of the order polygon, into a single image. Usually
involves edge matching adjacent scenes.
SRTM
Shuttle Radar Topography Mission digital elevation models.
Stereo
The collection of two or more images of the same Area of Interest (AOI) from different viewing angles.
Sun Azimuth
The azimuth of the sun as seen by an observer sitting on the target measured in a clockwise direction from north.
Sun Elevation
The angle of the sun above the horizon.
Sun-Synchronous
An orbit which rotates around the Earth at the same rate as the Earth rotates on its axis.
Swath Width
The width of an image.
Target Azimuth
The azimuth of the target as seen by an observer sitting on the spacecraft measured in a clockwise direction from
north.
TDI
Time Delay Integration.
Terrain Correction
The correction for variations in data caused by terrain displacement due to off-nadir viewing.
TLC
Time-lagged Line Count.
Universal Transverse Mercator Geographic Coordinate System (UTM)
See UTM.

v. 1.1.2 October 2014 66
UTM
Universal Transverse Mercator Geographic Coordinate System. UTM utilizes a two-dimensional Cartesian system to
specify locations on the Earths surface.
WV01
WorldView-1 satellite.
WV02
WV03

v. 1.1.2 October 2014 67
Index
absAcc, in MOSAIC_CLOSEDPOLYGONS shapefile, 20 for coordinates, 10
absAccUnit, in MOSAIC_CLOSEDPOLYGONS shapefile, 20 coordinate conventions, 10
absCalFactor, in image metadata, 28 copyrightText
acqDate, in MOSAIC_CLOSEDPOLYGONS shapefile, 19 in delivery index, 13
acquisitio, in STRIP shapefile, 17 in product component index, 21
area of interest, defined, 61 COTS, defined, 61
areaDesc, in delivery index, 14 countryCode, in delivery index, 14
attFilename, in product component index, 21 createDate, in ORDER shapefile, 17
attitude file currDate, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
described, 8 custOrd, in ORDER shapefile, 17
overview, 7 custOrderItemNo, in delivery index, 14
attitudeKnowledgeSrc, in image metadata, 34 custOrderNo, in delivery index, 14
avgLineRate, in image metadata, 29 custOrdItm, in ORDER shapefile, 17
B_Asym, in stereo file, 53 datum, in ORDER shapefile, 17
B_BIE, in stereo file, 53 datumName, in image metadata, 34
B_Conv, in stereo file, 53 datumOffset, in image metadata, 35
bandId delivery index, naming convention, 13
in image metadata, 25 delivery layout file, contents, 16
in RPC00B file, 47 delivery-level ISD, 7
in tile map file, 41 DEM, defined, 61
bandInfo, in PRODUCT shapefile, 18 DEMCorrection, in image metadata, 39
bicubic interpolation, defined, 61 dgOrderItemNo, in delivery index, 14
bilinear interpolation, defined, 61 dgOrderNo, in delivery index, 14
bitsPerPixel, in image metadata, 26 digital elevation model, defined, 61
CatId, in image metadata, 29 DRA, defined, 61
CE, defined, 61 DTED, defined, 61
CE90, defined, 61 E_Asym, in stereo file, 53
childCatalogID, in image metadata, 23 E_BIE, in stereo file, 53
CIR, defined, 61 E_Conv, in stereo file, 53
cloudCover earliestAcqTime, in image metadata, 34
in delivery index, 15 Earth coordinate system
in image metadata, 33 described, 10
in MOSAIC_CLOSEDPOLYGONS shapefile, 19 illustrated, 11
collDate, in MOSAIC_CLOSEDPOLYGONS shapefile, 20 ECF, defined, 61
collectAz, in MOSAIC_CLOSEDPOLYGONS shapefile, 19 edgeMatch, in image metadata, 37
collectEl, in MOSAIC_CLOSEDPOLYGONS shapefile, 20 effectiveBandwidth, in image metadata, 28
collectionStart, in delivery index, 14 end of transfer file
collectionStop, in delivery index, 14 described, 8
colorBalance, in image metadata, 37 overview, 7
colSpacing, in image metadata, 37 ephemeris file
colUncertainty, in image metadata, 30 described, 8
compressionType, in image metadata, 26 overview, 7
conventions ephemFilename, in product component index, 21
file naming, 9 errBias, in RPC00B file, 48
file naming, PVL format, 10 errRand, in RPC00B file, 48

v. 1.1.2 October 2014 68
exposureDuration, in image metadata, 29 delivery-level, 7
file format, general, 10 file described, 8
file layout, described, 8 files delivered, 7
overview, 6
file naming convention, 9
product component level, 7
fileList, in delivery index, 14
JPEG2000, defined, 62
filename, in tile map file, 42
jpegProfileName, in image metadata, 26
fileName, in TILE shapefile, 18
latestAcqTime, in image metadata, 34
firstId, in stereo file, 52
latOffset, in RPC00B file, 48
firstLineTime, in image metadata, 29
latScale, in RPC00B file, 48
FTP, defined, 61
layout file
GCP, defined, 61
described, 8
GE01, defined, 62 overview, 7
generationTime, in image metadata, 23 LE, defined, 62
geoCalFilename, in product component index, 22 LE90, defined, 62
geographic location map files license file
described, 8 described, 8
included in delivery, 16 overview, 7
overview, 7, 16
licenseTxtFilename, in product component index, 21
geographic projection, defined, 62 lineDenCoef, in RPC00B file, 48
geometric calibration file lineNumCoef, in RPC00B file, 48
described, 8
lineOffset, in RPC00B file, 48
overview, 7
GeoTIFF, defined, 62 lineScale, in RPC00B file, 48
Ground Control Point, defined, 6 LLColOffset, in tile map file, 43
Ground Sample Distance, defined, 62 LLH, in image metadata, 39
GSD, defined, 62 LLHAE, in image metadata, 27
gsd, in MOSAIC_CLOSEDPOLYGONS shapefile, 19 LLLat
in image metadata, 27
HAE, defined, 39
in tile map file, 44
heightOffset, in RPC00B file, 48 LLLon
heights above ellipsoide. See HAE in image metadata, 27
heightScale, in RPC00B file, 48 in tile map file, 44
horError, in MOSAIC_CLOSEDPOLYGONS shapefile, 19 LLRowOffset, in tile map file, 44
horizontalAccuracy, in image metadata, 39 LLX
image coordinate system in image metadata, 38
described, 11 in tile map file, 45
illustrated, 11 LLY
image metadata file in image metadata, 38
contents, 23 in tile map file, 45
described, 8 longOffset, in RPC00B file, 48
naming conventions, 23 longScale, in RPC00B file, 48
overview, 7
LRColOffset, in tile map file, 43
image support data. See ISD LRH, in image metadata, 38
imageDescriptor, in image metadata, 23 LRHAE, in image metadata, 27
imageIdStr, in MOSAIC_CLOSEDPOLYGONS shapefile, 19 LRLat
IMFFilename, in product component index, 21 in image metadata, 27
intro, in product component index, 21 in stereo file, 53
inverseFlattening, in image metadata, 35 in tile map file, 44
ISD LRLon
defined, 62 in image metadata, 27

v. 1.1.2 October 2014 69
in stereo file, 53 minSatAz, in image metadata, 31
in tile map file, 44 minSatEl, in image metadata, 31
LRRowOffset, in tile map file, 43 minSunAz, in image metadata, 30
LRX minSunEl, in image metadata, 31
in image metadata, 38 mode, in image metadata, 28
mosaic seamlines file, described, 16
LRY
Mosaic, defined, 62
MOSAIC_CLOSEDPOLYGONS shapefile, fields described,
manifest file 19
defined, 50 MrSid format, defined, 63
described, 8 MS, defined, 63
example, 50 Multispectral, defined, 63
overview, 7 Nadir, defined, 63
mapHemi, in image metadata, 36 National Imagery Transmission Format, defined, 63
mapProjCode, in image metadata, 35 nearest neighbor, defined, 63
mapProjName, in image metadata, 35 NED, defined, 63
mapProjParam, in image metadata, 36 NIIRS, defined, 63
mapZone, in image metadata, 36 NIR1, defined, 63
maxCollectedColGSD, in image metadata, 30 NIR2, defined, 63
maxCollectedRowGSD, in image metadata, 30 NITF format, defined, 63
maxCrossTrackViewAngle, in image metadata, 32 normalized values, defined, 46
maxInTrackViewAngle, in image metadata, 32 NRG, defined, 63
maxOffNadirViewAngle, in image metadata, 33 numberOfLooks
maxSatAz, in image metadata, 31 in delivery index, 15
maxSatEl, in image metadata, 31 in image metadata, 26
maxSunAz, in image metadata, 30 numColumns, in image metadata, 25
maxSunEl, in image metadata, 31 numGCP, in image metadata, 39
MBR, defined, 62 numPair, in stereo file, 52
meanCollectedColGSD, in image metadata, 30 numRows, in image metadata, 25
meanCollectedGSD, in image metadata, 30 numTiles, in tile map file, 42
meanCollectedRowGSD, in image metadata, 30 numTLC, in image metadata, 29
meanCrossTrackViewAngle, in image metadata, 33 nwLat, in delivery index, 15
meanInTrackViewAngle, in image metadata, 32 nwLong, in delivery index, 15
meanOffNadirViewAngle, in image metadata, 33 offNadir
meanProductColGSD, in image metadata, 30 in MOSAIC_CLOSEDPOLYGONS shapefile, 19
in STRIP shapefile, 17
meanProductGSD, in image metadata, 30
meanProductRowGSD, in image metadata, 30 off-nadir angle, defined, 63
ORDER shapefile, fields described, 17
meanSatAz, in image metadata, 31
meanSatEl, in image metadata, 31 orderDesc, in ORDER shapefile, 17
orderNumber, in delivery index, 13
meanSunAz, in image metadata, 31
meanSunEl, in image metadata, 31 orientationAngle, in image metadata, 36
mediaCreationDate, in delivery index, 13 originX, in image metadata, 36
metadata, defined, 62 originY, in image metadata, 36
minCollectedColGSD, in image metadata, 30 orthorectification, defined, 63
outputFormat, in image metadata, 28
minCollectedRowGSD, in image metadata, 30
minCrossTrackViewAngle, in image metadata, 32 overlap, in stereo file, 52
pan/panchromatic, defined, 64
minInTrackViewAngle, in image metadata, 32
minOffNadirViewAngle, in image metadata, 33 panSharpenAlgorithm, in image metadata, 25
pan-sharpened, defined, 64

v. 1.1.2 October 2014 70
photogrammetry, defined, 64 QB02, defined, 64
PIXEL shapefile, fields described, 19 radiometric correction, defined, 64
pixel, defined, 64 radiometricEnhancement, in image metadata, 26
PNIIRS radiometricLevel, in image metadata, 26
defined, 64 rational functions, illustrated, 46
in image metadata, 33 rational polynomial coefficients, defined, 45
positionKnowledgeSrc, in image metadata, 34 RCP terms, 46
postSpacing, in image metadata, 37 readme
prodDate, in MOSAIC_CLOSEDPOLYGONS shapefile, 20 contents, 13
prodDesc relAcc, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
in PIXEL shapefile, 19 relAccUnit, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
in PRODUCT shapefile, 18 remote sensing, defined, 64
in TILE shapefile, 18
resamplingKernel, in image metadata, 34
product area file, described, 16 resolution, defined, 64
product browse file restrictedAreaIntersect, in image metadata, 26
defined, 40
revNumber, in image metadata, 34
described, 8
example, 41 RGB, defined, 64
overview, 7 RMSE, defined, 64
product component areas file, described, 16 RMSE2D, in image metadata, 24
product component index contents, 21 rowSpacing, in image metadata, 37
product component index file rowUncertainty, in image metadata, 30
contents, 21 RPC, defined, 64
described, 8 RPC00B file
overview, 7 described,
product component level ISD, 7 contents, 47
product component XML file overview, 7
described, 49 RPC00Bfilename, in product component index, 22
example, 49 sampDenCoef, in RPC00B file, 48
product framing, defined, 64 sampNumCoef, in RPC00B file, 48
product level to product type relationships, 40 sampOffset, in RPC00B file, 48
product pixel area file, described, 16 sampScale, in RPC00B file, 48
PRODUCT shapefile, fields described, 18 satellite, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
product subcomponent areas file, described, 16 satId
product types covered, 6 in image metadata, 28
productAccuracy, in image metadata, 24 in RPC00B file, 47
productCatalogID, in image metadata, 23 scale, defined, 65
productGSD, in image metadata, 37 scanAz, in MOSAIC_CLOSEDPOLYGONS shapefile, 19
productLevel, in image metadata, 25 scanDir, in MOSAIC_CLOSEDPOLYGONS shapefile, 19
productOrderId, in image metadata, 23 scanDirection, in image metadata, 29
productScale seamlines, defined, 65
in delivery index, 14 secondId, in stereo file, 52
in image metadata, 24 seLat, in delivery index, 15
productType, in image metadata, 26 seLong, in delivery index, 15
productUnits, in image metadata, 36 semiMajorAxis, in image metadata, 35
projection, in ORDER shapefile, 17 sensor azimuth, defined, 65
PVL sensor correction, defined, 65
defined, 64 spatial mosaic, defined, 65
described, 10 SpecId, in RPC00B file, 47
example of format, 54 SRTM, defined, 65

v. 1.1.2 October 2014 71
stereo file ULH, in image metadata, 38
contents, 52 ULHAE, in image metadata, 27
defined, 51 ULLat
described, 8 in image metadata, 27
overview, 8 in stereo file, 53
stereo geometry, illustrated, 52 in tile map file, 44
stereo, defined, 65 ULLon
stereoFilename, in product component index, 22 in image metadata, 27
strip or substrip area file, described, 16 in stereo file, 53
STRIP shapefile, fields described, 16 in tile map file, 44
stripDesc, in STRIP shapefile, 16 ULRowOffset, in tile map file, 42
sun azimuth, defined, 65 ULX
sun elevation, defined, 65 in image metadata, 37
sunAz, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
sunAzimuth, in STRIP shapefile, 17 ULY
sunEl, in MOSAIC_CLOSEDPOLYGONS shapefile, 20
sun-synchronous, defined, 65 universal transverse mercator coordiante system,
swath-width, defined, 65 defined, 65
target azimuth, defined, 65 URColOffset, in tile map file, 43
TDI, defined, 65 URH, in image metadata, 38
TDILevel, in image metadata, 28 URHAE, in image metadata, 27
terrain correction, defined, 65 URLat
terrainHAE, in image metadata, 39 in image metadata, 27
tile map file in tile map file, 44
contents, 41 URLon
described, 8 in image metadata, 27
example, 60 in tile map file, 44
overview, 7
URRowOffset, in tile map file, 43
TILE shapefile, fields described, 18 URX
tileName, in TILE shapefile, 18 in image metadata, 38
tileOverlap, in tile map file, 42 in tile map file, 45
tileSizeX, in tile map file, 42 URY, in tile map file, 45
tileSizeY, in tile map file, 42 UTM, defined, 66
tileUnits, in tile map file, 42 version
tilFilename, in product component index, 22 in delivery index, 13
tiling, explained, 41 in image metadata, 23
time, defined, 12 in product component index, 21
TLC, defined, 65 verticalAccuracy, in image metadata, 39
TLCList, in image metadata, 29 volNum
TLCTime, in image metadata, 29 in PIXEL shapefile, 19
top-level delivery index in PRODUCT shapefile, 18
contents, 13 in TILE shapefile, 18
top-level index (readme) file WV01, defined, 66
overview, 7 WV02, defined, 66
described, 8 WV03, defined, 66
top-level index (XML) file XML file
overview, 7 described, 8, 10
described, 8 example, 57
ULColOffset, in tile map file, 42 overview, 7
XMLFilename, in product component index, 21

v. 1.1.2 October 2014 72
v. 1.1.2 October 2014 73

ISD External

Uploaded by

Copyright:

Available Formats

ISD External

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ISD External

Uploaded by

Copyright:

Available Formats

Imagery Support Data (ISD)

DigitalGlobe Imagery Support Data (ISD) Documentation

DigitalGlobe Imagery Support Data (ISD) Documentation

DigitalGlobe Imagery Support Data (ISD) Documentation

DigitalGlobe Imagery Support Data (ISD) Documentation

DigitalGlobe Imagery Support Data (ISD) Documentation

FILE NAME EXTENSION BASIC IMAGERY STANDARD ORTHORECTIFIED

Top-Level Index (Readme)

Top-Level Index (XML) File .XML XX XX XX

Layout File .JPG XX XX XX

Geographic Location Map

Manifest File .MAN FTP only FTP only FTP only

Product Component-Level ISD

Product Component Index

License File .TXT XX XX XX

Image Metadata File .IMD XX XX XX

Product Browse File .JPG XX XX XX

Tile Map File .TIL XX XX XX

Ephemeris File .EPH XX

Geometric Calibration File .GEO XX

RPC00B File .RPB XX XX

XML File .XML XX XX XX

DigitalGlobe Imagery Support Data (ISD) Documentation

Stereo Data File .STE XX XX

2.1 ISD File Description

2.2 File Layout

DigitalGlobe Imagery Support Data (ISD) Documentation

Figure 2.1 File Layout Diagram

DigitalGlobe Imagery Support Data (ISD) Documentation

3.2 PVL Format

3.3 XML Format

3.4 Coordinate Conventions

3.4.1 Earth Coordinates (E)

DigitalGlobe Imagery Support Data (ISD) Documentation

Figure 3.1 Earth Coordinate System

3.4.2 Image Coordinates

M-1 (N-1, M-1)

Figure 3.2 Image Coordinate System

DigitalGlobe Imagery Support Data (ISD) Documentation

DigitalGlobe Imagery Support Data (ISD) Documentation

Table 4.1 Top-Level Delivery Index (README) Contents (ISDF.DEL.README)

FIELD FIELD NAME / FORMAT RANGE / VALUE CONDITIONS /

version Version of the ISD. 20.0 to 99.99

Use, duplication or disclosure by the

The time in this tag has

DigitalGlobe Imagery Support Data (ISD) Documentation

Lists all filenames such as:

Customer supplied Example:

Date of first image

Date of final image

Two letter country

Level 3A: 1:50,000

DigitalGlobe Imagery Support Data (ISD) Documentation

Indicates whether this

Estimate of the max

DigitalGlobe Imagery Support Data (ISD) Documentation

4.3 Delivery Geographic Location Map Files

Table 4.2 STRIP Shapefile Delivery Names and Attributes

FIELD FIELD NAME / DESCRIPTION FORMAT RANGE / VALUE CONDITIONS /

Catalog ID corresponding with associated strip