Scribd Logo
Upload

Welcome to Scribd!

  • 289 views

    Commisioning and Configure Procedure of 3g 3922 Series Bts

    Uploaded by

    Pankaj Maithani
    This document provides instructions for commissioning an RBS 3922 Series radio base station node. It outlines the basic requirements, including a test PC with specific software, cables, and a DC power supply. The steps include formatting hard drives on the RBS, defining its IP address, uploading software via FTP, and logging in. An Element Manager is then used to run scripts that configure the cabinet and site equipment, creating sectors for the RBS. Reloading the RBS executes all uploaded configuration files.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Commisioning and Configure Procedure of 3g 3922 Series Bts

    Uploaded by

    Pankaj Maithani
    289 views40 pages
    This document provides instructions for commissioning an RBS 3922 Series radio base station node. It outlines the basic requirements, including a test PC with specific software, cables, and a DC power supply. The steps include formatting hard drives on the RBS, defining its IP address, uploading software via FTP, and logging in. An Element Manager is then used to run scripts that configure the cabinet and site equipment, creating sectors for the RBS. Reloading the RBS executes all uploaded configuration files.

    Original Description:

    done

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for commissioning an RBS 3922 Series radio base station node. It outlines the basic requirements, including a test PC with specific software, cables, and a DC power supply. The steps include formatting hard drives on the RBS, defining its IP address, uploading software via FTP, and logging in. An Element Manager is then used to run scripts that configure the cabinet and site equipment, creating sectors for the RBS. Reloading the RBS executes all uploaded configuration files.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    289 views40 pages

    Commisioning and Configure Procedure of 3g 3922 Series Bts

    Uploaded by

    Pankaj Maithani
    This document provides instructions for commissioning an RBS 3922 Series radio base station node. It outlines the basic requirements, including a test PC with specific software, cables, and a DC power supply. The steps include formatting hard drives on the RBS, defining its IP address, uploading software via FTP, and logging in. An Element Manager is then used to run scripts that configure the cabinet and site equipment, creating sectors for the RBS. Reloading the RBS executes all uploaded configuration files.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 40

    Commissioning Doc for

    RBS 3922 Series.


    Details of RBS 3922 Series.

    Before the commissioning on 3922 series product


    should have a good understanding of features of the
    product below enclosed document will give a good
    understanding learning 3922 series Node B.

    Commissioning.
    Procedure:

    Basic Requirements for Testing:

    Test PC ( 1) with-
    Window XP, 2 GB RAM ( Hardware)
    Hyper terminal ( Software)
    Total commander FTP client ( FTP Software)
    Java application JRU 6U/5U ( Java Software)
    Ericsson RBS Element Manager

    Cables-
    CBU Serial Cable ( DB9 Cable)
    CBU Ethernet Cable ( Customized cable)
    Ethernet Loopback Cable (Straight RJ45 cable used
    for CBU card testing)

    DC Power Supply (-48 VDC) - 1

    Open Hyper Terminal or Telnet on you PC to login....


    Note: Here example of login through hyper has been a terminal.

    Make a new connection named RBS3922 (user


    defined).
    Select Com Port which USB cable is connected.

    Select Restore default setting for COM


    properties.
    Now give reload.
    This command will put RBS in back up mode.

    RBS3922 has predefined hard drives d and C2.


    Before to commissioning of RBS we need to
    format D & C2 drives.
    Firstly, format the D drive by command:
    formathd /D

    Now, format the c2 drive of RBS by


    formathd /c2
    Ifconfig le0 169.254.1.1. netmask
    255.255.255.0 use
    This command will define IP 169.254.1.1 on
    RBS.

    Give RELOAD command to execute the


    previous action.
    Now put Ip on Lan connection
    Ip address 169.254.1.2
    Subnet mask 255.255.255.0
    Default gateway 169.254.1.1
    Upload RBS drives with the available
    database by Window Commander.

    Win Commander will like open.


    Now download Rbs software in win commander.

    After completing the data transfer from


    computer to RBS, commands reload, to execute
    all the files that have been uploaded.
    Now open this window login server ready.
    Now we login RBS.
    Hyper terminal ask for:
    User Name: rbs
    password: rbs

    Now open Element Manager


    Provide RBS IP 169.254.1.1 in Address block.
    Now click on Add.

    NE for RBS3922 has been prepared, Click on


    Connect.
    Element manager software will open like below:

    Go to Cabinet Equipment Configuration to


    upload script.
    Now click on next to proceed the one by one
    step to execute the windows.

    Browse the available path where Cabinet


    Equipment Configuration file stored.
    Select the script and click on next.

    Click on next
    This window appears when script is run.

    During this process connection with RBS lost.


    Restore in some seconds.
    When connection is restored then this window
    appears.
    Current configuration successfully loaded from
    radio base station.
    RBS slides Present and some next will show
    you the details from recently uploaded script.

    Then appears this window.

    Proceed to click on next no parameter will be


    changed.
    Proceed to click on next no parameter will be
    changed.

    Window asks for an automatic restart.


    Then this window appears.
    Now finally cabinet equipment configuration
    completed successfully.

    Now Go Tools > Site Equipment to upload this


    script.
    Now click on next.

    Browse the path where Site Equipment


    Configuration script is available.
    Select the site equipment script and click on
    next.

    Now click on next to proceed.

    Now preparing for configuration.


    Present slides some next will show you the
    details.
    Pick from recently uploaded script.

    Now click on next to proceed the script run.


    Now click on next to proceed the script run.

    Now click on next to proceed the script run.


    Now click on next to proceed the script run.

    Now click on next to proceed the script run.


    Now click on next to window and create the
    sectors.

    Then this window appears to finish.


    Now site equipment configuration run.

    Configuration successfully completed.


    Give reload command the execute all the script
    has be
    Uploaded recently.

    You might also like