Set 5 W

SURVEYING INSTRUMENTS
SOKKIA
SET5W
WATERPROOF TOTAL STATION
Water, water everywhere . . . but not a drop of worry.
The waterproof SET5W is ruggedly built to

withstand harsh operating conditions.
Being fully water-resistant,
the SET5W operates
dependably even where
conventional total stations
do not, such as in sudden
showers, continuous
drizzling rain, or the high
humidity of underground
construction sites.
The SET5W complies with IPX7 of
international standard IEC 529 (when
waterproof battery BDC25A and
connector caps are installed).
IPX7 requires that an instrument is
protected against the effects of
temporary immersion in water.
Testing is conducted in a water tank
with the instrument kept at a depth of
1 m (measured from the bottom of
the instrument) for 30 minutes. The
water temperature should not differ
from that of the instrument by more
than 5C/9F.
The SET5W is thus safely protected
against sudden showers.
During periods of prolonged rain,
survey work can be continued even
without an umbrella.
In the hot and highly humid conditions of an underground construction
site, the telescope of the SET5W is
highly resistant to being fogged.
Because the SET5W is not charged
with nitrogen gas, maintenance and
service work can be carried out with
greater ease and at less cost.
Enhanced Software
The SET5W can be easily customized to your
preferred key assignments.
Sophisticated Application Software

Missing Line Measurement (MLM)
The SET5W offers optimum keyboard flexibility. Any

keyboard layout can be configured. For example, functions
can be assigned to any key position on any page, and
unused functions can be temporarily deleted.
A powerful softkey feature facilitates input of coordinate
values, feature codes, etc.
The SET5W measures horizontal distance, slope distance, height difference, and slope in percent (%) between
two prisms, all at the touch of a key.
Remote Elevation Measurement (REM)

Spacious 3,000-point Internal Memory
The SET5W's internal memory is largeholding a full
3,000 data pointsand secure. For optimum convenience,
measurements can be performed and recorded at the
touch of a key.
Up to five (5) job files can be created to efficiently organize multiple survey tasks.
Forty (40) feature codes (max.13 characters each) can be
kept in the memory for easy recall as needed.
The SET5W can be used to easily determine the height of

a point where a prism cannot be placed. The system sights
a prism directly above or below the target point, and then
sights the point desired.
Angle Repetition
For enhanced accuracy in the horizontal angle measurement, the SET5W can measure in repetition. It then
calculates and displays the average of the multiple angle
measurements.
Azimuth Angle Setting
3-D Coordinate Measurement
Using the coordinates of the instrument station and a

backlight point, the SET5W can automatically set the
horizontal angle to the azimuth of the backsight.
The SET5W calculates 3-D coordinate values of measuring points.

The operator may choose display settings either of "N, E,
Z" or "E, N, Z."
Resection
3-D Setting-out
With 2 to 5 known points, the SET5W can be used to

determine the azimuth and coordinates of the unknown
instrument station.
When using 2 known points, both angles and distances
are measured. When using 3 or more points, the distance
does not always have to be measured.
The SET5W can be used to perform 3-dimensional

setting-out with N, E and/or Z coordinates.
Offset Measurements
Two basic offset measurement methods are provided to
measure the hidden points. One calls for input of the offset
distance and the direction between the measuring point
and the prism. The other uses a prism set on the left or
right side of the measuring point at the same distance from
the SET5W; the angles and distance to the prism are
measured, and the measuring point is sighted. In both
cases, the SET5W calculates the horizontal and vertical
angles and distance, or the N, E, Z coordinates.
Dependable Hardware
Proven Dual-axis Compensator
The High-performing EDM
Since its introduction with the Series C total station in

1989, Sokkia's dual-axis compensator has proven its
reliability and accuracy at survey sites all over the world.
The dual-axis tilt sensor monitors deviations of both the X
and Y axes, and the correct horizontal and vertical angle
readings are automatically computed and applied. The
result is easier and faster instrument leveling.
1,500 m/4,900 ft range with a single prism under good

ambient conditions (40 km/25 miles visibility, with no haze,
overcast, no scintillation).
Outstanding precision; (3+2 ppmxD)mm. This corresponds to a deviation of a mere 3.2 mm at a distance of
100 m and 5 mm at 1,000 m.
Supreme speed; only 1.7 seconds initial measuring time in
the rapid measurement mode.
CP01 Compact Prism

One AP01 Prism
Three AP01 Prisms
Average Conditions
700 m/2,300 ft.
1,200 m/3,900 ft.
1,600 m/5,200ft.
Good Conditions
1,500 m/4,900 ft.
2,000 m/6,500ft.
Powerful Telescope
Highest magnification in its class: 30x
Easy, accurate sighting of prisms or targets
Outstanding Mobility
Total carrying weight (including instrument, tribrach,
battery and hard case) is a mere 8 kg/18 Ibs. The secret
lies in the lightest and most compact carrying case of its
kind (W390xD255xH220mm / W15.3xD10.0xH8.6 in.),
making the SET5W supremely portable.
A convenient shoulder strap is provided as standard. An
optional back pack (SC94) is ideal for longer day treks.
Standard Configuration
The SET5W comes with two
(2) waterproof batteries
(BDC25A), a battery charging
adapter (EDC19), a quick
charger (CDC27, CDC31 or
CDC31A), a tubular compass
(CP7), sunshade, lens cap,
plumb bob, vinyl cover, tool kit,
operator's manual, carrying
case and shoulder strap.
Electronic Field Books

(SDR33/SDR31 )
Thanks to its advanced twoway communications port, the
SET5W's functions can all be
accessed by external
controller. For example, by
connecting one of Sokkia's
acclaimed Electronic Field
Books (SDR33 or SDR31),
complex field operations such
as traverse adjustment,
intersection, area calculations
and roading can be carried out
with remarkable ease.
Optional Accessories
DE17A
OF1/OF1A
SC94
Diagonal Eyepiece
Solar Filters
Back Pack
SET5W Specifications
Telescope
Length
Objective aperture
Magnification, image
Resolving power
Field of view
Minimum focus
Reticle Illumination
Angle measurement
Display resolution
Angle unit
Accuracy
Dual-axis compensator
Display mode
H&V
H&V
H&V
H
V
Distance measurement
Measuring range
(slope distance)
With CP01 compact prism

With one AP01 prism
With three AP01 prism
Distance unit
Accuracy (Fine measurement)
Measuring unit and time Fine
(slope distance)
Rapid
Tracking
Atmospheric correction
Prism constant
Refraction & Earth-curvature
correction
General
Display
Keyboard
Resume function
Sensitivity of levels
Optical plummet
Interface
2-way communication
Data storage
Water protection
Operating temperature
Tilting/Trunnion axis height
Size with handle and battery
Weight with handle and battery
Weight of parts
Power supplies
Battery level display
Automatic power cut-off
Power source
Working duration at 25C (77F)
w/one BDC25A battery
Charging time
Fully transiting, coaxial EDM

165mm (6.5in)
45mm (1.8in)
30x, Erect
3.0"
130'(26m/1,000m)
1.3m (4.3ft.)
Bright or Dim, selectable
Incremental encoder, diametrical detection
1"/ 0.2 mgon/ 0.005 mil, 5"/ 1 mgon/ 0.02 mil
Degree/Gon/Mil
5" (1.5 mgon/ 0.02 mil) according to DIN18723
Liquid dual-axis tilt sensor, range: 3'(55 mgon)
Clockwise/Counterclockwise, Repetition, Oset, Hold available
Zenith 0/ Horizontal 0/ Horizontal 090/ Slope %
Electro-optical with modulated infrared light.
A: Average conditions; slight haze, visibility about
20km (12 miles), sunny periods, weak scintillation.
G: Good conditions; no haze, visibility about
40km (25 miles), overcast, no scintillation.
A: 1.3m (4.3ft.) to 700m (2,300ft.)
A: 1.3m (4.3ft.) to 1,200m (3,900ft.), G: 1,5OOm (4,900ft.)
A: 1.3m (4.3ft.) to 1,600m (5,200ft.), G: 2,000m (6,500ft.)
Meters or feet selectable
(3+2ppmxD)mm D=measuring range, unit=mm
0.001m Every 3.2 seconds (initial 4.7 seconds)
0.001m 1.7 seconds
0.01m Every 0.3 seconds (initial 1.4 seconds)
Key-in the temperature and pressure, or -499 to +499ppm.
-99 to 0mm (1 mm steps)
On/Off selectable (K=0.142)
LCD dot matrix display (20 characters x 4 lines) on both faces

with back light.
5 keys on both faces, free assignment of functions.
On/off selectable
Plate level: 40"/2mm, Circular level: 10'/2mm (in tribrach)
Image: erect, Magnification: 3x, Minimum focus: 0.5m (1.6ft.)
Asynchronous serial, RS-232C compatible, baud rate 1200/9600 bps
Provided
3,000-point data memory
IPX7 (when BDC25A battery and connector caps are installed.)
-20C to +50C (4F to 122F)
236mm (9.3in) from tribrach bottom, 193mm (7.6in) from tribrach dish.
W150 x D165 x H353 mm, W5.9 x D6.5 x H13.9 in.
5.6kg (12.4 Ibs)
BDC25A battery: 240g (6.5oz), Handle: 100g (3.5oz),
Tribrach: 740g(1.6lbs), Case: 2.4kg (5.3lbs)
4 steps with warning message.
On/off selectable (30 minutes after the last operation)
BDC25A waterproof battery, Ni-Cd 6V, 2 supplied as standard.
Distance & angle measurement: about 5 hours, about 600 points
(Fine & single measurement with 30 seconds intervals).
Angle measurement only: about 9 hours.
CDC27/31: about 80 minutes, CDC31A: about 90 minutes
Designs and specifications are subject to change without notice.
SOKKIA CO.,LTD.
1-l, TOMIGAYA l-CHOME, SHIBUYA-KU, TOKYO, 151 JAPAN
PHONE +81-3-3465 5211 FAX +81-3-346-5203
INTERNATIONAL DEPT. PHONE +81-3-346-5201 FAX +81-3-3465-5202

Set 5 W

Uploaded by

Copyright:

Available Formats

Set 5 W

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Set 5 W

Uploaded by

Copyright:

Available Formats

SURVEYING INSTRUMENTS

WATERPROOF TOTAL STATION

Water, water everywhere . . . but not a drop of worry.

The waterproof SET5W is ruggedly built to

Sophisticated Application Software

The SET5W offers optimum keyboard flexibility. Any

Remote Elevation Measurement (REM)

The SET5W can be used to easily determine the height of

Azimuth Angle Setting

3-D Coordinate Measurement

Using the coordinates of the instrument station and a

The SET5W calculates 3-D coordinate values of measuring points.

With 2 to 5 known points, the SET5W can be used to

The SET5W can be used to perform 3-dimensional

The High-performing EDM

Since its introduction with the Series C total station in

1,500 m/4,900 ft range with a single prism under good

CP01 Compact Prism

Electronic Field Books

With CP01 compact prism

Fully transiting, coaxial EDM

LCD dot matrix display (20 characters x 4 lines) on both faces

Designs and specifications are subject to change without notice.

You might also like