80 MT Crawler Crane

Download as pdf or txt
Download as pdf or txt
You are on page 1of 40

5676 (supersedes 5665)-0915-P8

Technical Data
Specifications & Capacities

HSL Crawler Crane

80 Ton (72.6 metric ton)

CAUTION: This material is supplied for reference use


only. Operator must refer to in-cab Crane Rating
Manual and Operator's Manual to determine
allowable crane lifting capacities and assembly and
operating procedures.

LinkBelt Cranes

138 HSL

5676 (supersedes 5665)-0915-P8

138 HSL

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Table Of Contents
Upper Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load Hoist Drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Front-Mounted Third Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Rear-Mounted Fourth Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boom Hoist Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Swing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rated Capacity Limiter System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boom Hoist System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machinery Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Catwalks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lower Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carbody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Travel and Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attachment and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conventional Tube Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tube Jib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary Tip Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Upper Counterweights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Jib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hook Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hook Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transport Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transport Drawings - Tube Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load Hoist Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front or Rear Drum - 7/8 in (22.4mm) Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boom Hoist Drum - 5/8 in (16mm) Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Mounted Third Drum - 5/8 in (16mm) Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Mounted Fourth Drum - 7/8 in (22.4mm) Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tube Boom Make-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LinkBelt Cranes

138 HSL

1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
4
4
4
5
7
7
8
9
11
12
13
13
14
15
16
16
16
16
16
17
18
19

5676 (supersedes 5665)-0915-P8

Tube Boom Working Range Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


Tube Boom Load Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom Make-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom Working Range Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom Load Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Jib Attachment Make-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tube Boom + Jib Working Range Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tube Boom + Jib Load Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom + Jib Working Range Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Angle Boom + Jib Load Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138 HSL

20
21
23
24
25
26
27
28
31
32

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Upper Structure
Hydraulic System

Frame
All welded steel frame with precision
machined surfaces for mating parts.
Turntable Bearing
S Inner race with internal swing gear is
bolted to lower frame.
S Outer is race bolted to upper frame.

Engine
Engine
Full pressure lubrication, oil filter, air
cleaner, hour meter, throttle, and electric
control shutdown.

Cummins QSB6.7 Tier 4 Final


Number of cylinders

Bore and stroke

4.20 in x 4.88 in
(107 x 124mm)

Piston displacement

408 in3 (6.8L)

Engine rpm at full


load speed

2,000 rpm

Hiidle rpm

2,000 rpm

Gross engine hp

270 hp (210kw)

Peak torque

730 ft lb (990joule) @
1,500 rpm

Electrical system

24 volt

Fuel tank capacity

122 gal (460L)

Batteries

2-12 volt

Approximate fuel
consumption

gal/hr (L/hr)

100% hp

12.62 (47.77)

75% hp

10.57 (40.01)

50% hp

7.57 (28.66)

25% hp

4.16 (15.75)

Fuel Tank
Equipped with fuel sight level gauges,
flame arrester, and self-closing cap with
locking eye for padlock.

Hydraulic Pumps
The pump arrangement is designed to
provide hydraulically powered functions
allowing positive, precise control with in
dependent or simultaneous operation of
all crane functions.
S Two variable displacement pumps
operating at 4,550 psi (320kg/cm2) and
70 gal/min (266L/min) powers load
hoist drums, boom hoist drum, optional
third drum, optional fourth drum, and
travel.
S One variable displacement pump
operating at 4,625 psi (325kg/cm2) and
40 gal/min (152L/min) powers the swing
motor.
S One fixed displacement gear type
pump operating at 2,985 psi
(210kg/cm2) and 15 gal/min (57L/min)
powers the hydraulic counterweight
selfassembly system, side frame
extend/retract cylinder and optional
quick draw cylinder.
S One fixed displacement gear type
pump operating at 1,420 psi
(100kg/cm2) and 10 gal/min (39L/min)
powers the hydraulic remote control
system.
S One fixed displacement gear type
pump operating at 1,420 psi
(100kg/cm2) and 8 gal/min (30L/min)
powers the optional tagline winch.
Pump Control (Fine Inching) Mode
Special pump setting, selectable from the
operator's cab, that allows very slow
movements of load hoist drums, boom
hoist drum, and travel for precision work.
Hydraulic Reservoir
66 gal (250L), equipped with sight level
gauge. Diffusers built in for deaeriation.
Filtration
Ten micron, full flow, line filter in the control
circuit. All oil is filtered prior to entering the
reservoir.
Counterbalance Valves
All hoist motors are equipped with coun
terbalance valves to provide positive load
lowering and prevent accidental load
drop if the hydraulic pressure is suddenly
lost.

LinkBelt Cranes

138 HSL

Load Hoist Drums


Each drum contains an axial piston, fixed
speed hydraulic motor with individual au
tomatic winch motor brakes. Power flow
is directed through a patented, semi-out
board mounted, wet style multi-disc
brake. The brake is mounted on the out
put side of the planetary, which greatly
reduces drag associated with most wet
style brakes in free-fall mode.
S Power up/down & free-fall operation
modes
S Automatic brake mode (spring applied,
hydraulically released, wet type brake)
S Drum lagging grooved for wire rope
S Drum pawl controlled manually
S Electronic drum rotation indicators
S Mounted on anti-friction bearings
S 19.2 in (488mm) root diameter
S 33.1 in (840mm) flange diameter
S 20.8 in (529mm) width
The free-fall operation mode is designed
to prevent load lowering even if the freefall switch is accidentally activated.
The automatic brake mode meets all
OSHA requirements for personnel han
dling.

Optional Front-Mounted
Third Hoist Drum
The hydraulic winch is pinned to the front
of the upper frame and is used in conjunc
tion with a fleeting sheave and 3-sheave
idler assembly to run the wire rope over
the boom top section.
S Controlled free spooling capability for
pile driving applications.
S 10.6 in (270mm) root diameter
S 20 in (508mm) flange diameter
S 13.5 in (343mm) width
S Mounted on anti-friction bearings

5676 (supersedes 5665)-0915-P8

Optional Rear-Mounted
Fourth Hoist Drum
Drum contains an axial piston, variable
speed hydraulic motor with individual au
tomatic winch motor brakes. Power flow
is directed through a patented, semi-out
board mounted, wet style multi-disc
brake.
S Power up/down & free-fall operation
modes
S Automatic brake mode (spring applied,
hydraulically released, wet type brake)
S Drum lagging grooved for wire rope
S Drum pawl controlled manually
S Electronic drum rotation indicators
S Mounted on anti-friction bearings
S 18.0 in (457mm) root diameter
S 30.7 in (780mm) flange diameter
S 19 in (483mm) width
S Pins to rear of upper frame
S Plumbing and valving standard with
main unit
The free-fall operation mode is designed
to prevent load lowering even if the freefall switch is accidentally activated.
The automatic brake mode meets all
OSHA requirements for personnel han
dling.

Boom Hoist Drum


Contains a pilot controlled, bi-directional,
axial piston motor and a planetary gear re
duction unit to provide positive control un
der all load conditions.
S Spring applied, hydraulically released,
disc type brake controlled automatically
S Drum lagging grooved for wire rope
S Drum pawl controlled automatically
S Mounted on anti-friction bearings
S 17.7 in (450mm) root diameter
S 28 in (711mm) flange diameter
S 8.8 in (223mm) width

Swing System
Mechanically controlled bi-directional
axial piston motor and planetary gear re
duction unit to provide positive control un
der all load conditions.
S Spring applied, hydraulically released,
360 multi-plate brake
S Free swing mode when lever is in neu
tral position
S Two position positive house lock
S Audio/Visual swing alarm
S Maximum swing speed is 4.7 rpm

Counterweight
Consists of a three-piece design that can
be easily lowered to the ground using the
gantry.
S A upper counterweight consists of
one, 23,305 lb (10 571kg) base slab
S B upper counterweight consists of
one, 16,944 lb (7 686kg) weight
S C upper counterweight consists of
one, 12,071 lb (5 475kg) weight
Total combined counterweight is 52,320 lb
(23 732kg).

Operator Cab
Fully enclosed modular steel compart
ment is independently mounted and
padded to protect against vibration and
noise.
S All tinted/tempered safety glass
S Folding hinge entry door and sliding
front glass window
S 19,000 BTU hot water heater
S 18,600 BTU air conditioner
S Door and window locks
S Circulating fan
S Sun visor
S Cloth seat
S Defroster
S Windshield wipers and washer
S Dry chemical fire extinguisher
S Engine instrumentation panel (voltmeter,
engine oil pressure, engine water tem
perature, fuel level, hydraulic oil tem
perature, hour meter, and service moni
tor system)
S Electronic drum rotation indicators for
front and rear hoist drums
S Rearview camera
S Six way adjustable seat
S Hand and foot throttle
S Fully adjustable single axis controls
S Swing lever with swing brake and horn
located on handle
S Bubble type level
S Ergonomic gauge layout
S Controls shut off lever
S Control stand is adjustable for operator
comfort.

Rated Capacity Limiter


System
The HSL rated capacity limiter system is a
boom hoist, dead end load cell system.
This system provides the operator with use
ful geometrical data, to include:
S Main Boom Length
S Main Boom Angle
S Jib Length
S Jib Angle
S Operating Mode
S Load Radius
S Boom Tip Height
S Audible Alarm
S Pre-Warning Light
S Overload Light
S Load On Hook
S Function kick-outs including over load
S Operator settable stops (ramped stops)
S Anti-Two Block Indicator

Boom Hoist System


Designed to lift off maximum boom or
maximum boom plus jib unassisted. Op
erates up to a maximum boom angle of
80. Boom hoist limit system limits maxi
mum boom angle operation.
S 14-part reeving with 16mm (0.63 in)
wire rope
S 22 ft (6.71m) live mast
S Bridle assembly
S Two 1.25 in (32mm) pendants
S Dual telescoping type backstops
S Sheaves contain sealed anti-friction
bearings
S Boom speed from 25-70 is 36.3 sec
onds with no load. Speed was deter
mined using 80 ft (24.38m) of angle
boom.

Machinery Cab
Hinged doors (four on right side, three on
left side) for machinery access. Storage/
rigging box located on operator's side of
upper house. Equipped with rooftop ac
cess ladder and skid resistant finish on
roof.

Catwalks
Standard on right and left sides. Catwalks
are removable for reduced travel width.

138 HSL

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Lower Structure
Carbody
Lower Frame
All welded high strength steel [65,000 psi
(448.16MPa) yield] box construction
frame with precision machined surfaces
for turntable bearing and rotating joint.
S 9 ft 2.3 in (2.80m) overall width
S 11 ft 10.9 in (3.63m) overall length

Side Frames

Track Rollers
S Eleven sealed (oil filled) track rollers per
side frame
S Heat treated, mounted on oil filled antifriction bearings
Tracks
Heat treated, self-cleaning, multiple
hinged track shoes joined by one-piece
full floating pins; 52 shoes per side frame
Take Up Idlers
Cast steel, heat treated, self-cleaning,
mounted on aluminum/bronze bushings.
Lubricated through idler shaft.

Side Frames
All welded, precision machined, steel
frames can be hydraulically extended and
retracted by a hydraulic cylinder mounted
in the lower frame.
S 14 ft (4.27m) extended gauge
S 8 ft 11 in (2.72m) retracted gauge
S 20 ft 2 in (6.15m) overall length
S 36 in (0.91m) wide track shoes
S Sealed (oil filled) idler and drive plane
taries
S Compact travel drives
S Hydraulic self adjusting tracks

Travel and Steering


Travel and Steering
Each side frame contains a pilot con
trolled, bi-directional, axial piston motor
and a planetary gear reduction unit to pro
vide positive control under all load condi
tions.
S Individual control provides smooth,
precise maneuverability including full
counter-rotation.
S Spring applied, hydraulically released
disc type brake controlled automatically
S Maximum travel speed is 1.1 mph
(1.7km/h) in high speed and 0.7 mph
(1.1km/h) in low speed.
S Designed to 30% gradeability

Optional
S Rud-o-matic model 1248 tagline
winder for angle boom (double barrel,
spring wound, drum type)

Attachment and Options


Conventional Tube Boom
40-200 ft (12.19-60.96m)
Basic Boom
40 ft (12.19m) two-piece design that
utilizes a 20 ft (6.10m) base section and
a 20 ft (6.10m) open throat top section
with in-line connecting pins on 54 in
(1.37m) wide and 44 in (1.12m) deep
centers.
S Boom foot on 43.5 in (1.10m) centers
S 3 in (7.62cm) diameter chords
S Lugs on base section for self assembly
S Deflector roller on top section
S Permanent skid pads mounted on top
section to protect head machinery
S Rigid sheave guards

LinkBelt Cranes

S Five, 18 in (0.46m) root diameter steel


sheaves mounted on sealed anti-fric
tion bearings
S Mechanical boom angle indicator

Tube Boom
Extensions

Optional
Self assembly system that mounts in the
boom base to allow loading/unloading of
counterweights or a boom section.
Tube Boom Extensions
The following table provides the lengths
available and the suggested quantity to
obtain maximum boom in 10 ft (3.05m) in
crements. Midpoint pendant connections
are required at 80 ft (24.38m) for boom
lengths of 170 ft (51.80m) thru 200 ft
(60.96m).

138 HSL

S
S
S
S

Quantity For Max


Boom

ft

10

3.05

20

6.10

30

9.14

Wear bars on top of each section


Appropriate length pendants
Maximum tip height of 204 ft (62.18m)
Boom connecting pins storage on each
extension

5676 (supersedes 5665)-0915-P8

Tube Jib

Angle Boom
40-150 ft (12.19-45.72m)
Basic Angle Boom
40 ft (12.19m) two-piece design that
utilizes a 20 ft (6.10m) base section and
a 20 ft (6.10m) top section with in-line
connecting pins on 45.7 in (1.16m) wide
and 45.7 in (1.16m) deep centers.
S Boom foot on 43.5 in (1.10m) centers
S 4 in x 4 in x 0.38 in (10.16cm x 10.16cm x
0.97cm) angle chords
S Lugs on base section to attach carrying
links
S Deflector roller on top section
S Permanent skid pads mounted on top
section to protect head machinery
S Rigid sheave guards
S Four, 18 in (0.46m) root diameter steel
sheaves mounted on sealed anti-fric
tion bearings
S Mechanical boom angle indicator
Optional
Three sheave head machinery for clam
applications
Angle Boom Extensions
The following table provides the lengths
available and the suggested quantity to
obtain maximum boom in 10 ft (3.05m) in
crements. Midpoint pendant connections
are not required.
Angle Boom
Extensions

30-60 ft (9.14-18.29m)
Basic Tube Jib
30 ft (9.14m) two-piece design that uti
lizes a 15 ft (4.57m) base section and a
15 ft (4.57m) top section with in-line
connecting pins on 32 in (0.81m) wide
and 24 in (0.61m) deep centers.
S 2 in (50.8mm) diameter chords
S One 18.50 in (0.47m) root diameter
steel sheave mounted on sealed antifriction bearings
S 15 ft (4.57m) jib extensions provide jib
lengths of 45 ft (13.72m) and 60 ft
(18.29m).
S Jib offset angles at 5, 15, and 25
S The maximum tip height of boom + jib
is 242 ft (73.76m) using the tube boom
and 204' (62.18m) using the angle
boom.

Auxiliary Tip Extension


Designed for use with tube boom up to
190 ft (57.91m) to use in place of jib to pro
vide clearance between working hoist
lines. The extension is equipped with a
single 18 in (0.45m) root diameter nylon
sheave mounted on sealed anti-friction
bearings. Maximum capacity is 9 Ton
(8.16mt).

Quantity For Max


Boom

ft

10

3.05

20

6.10

30

9.14

S Deflector roller on top of each section


S Appropriate length pendants
S Maximum tip height of 154 ft (46.94m).

138 HSL

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Dimensions
English

Metric

40 ft

12.19m

Minimum Load Radius

10 ft 2.75 in

3.19m

Maximum Boom Angle

80

80

Track Shoe Width

36 in

0.91m

General Dimensions
Basic Boom

Maximum height of
live mast from ground
is 29' 2 (8.89m)

23' 9**
(7.24m)

8' 11
(2.72m)

3' 8
(1.12m)
12' 2
(3.71m)
14' 2
(4.32m)
C
L OF ROTATION
Note: **@ Maximum boom angle (80) with maximum boom [200 ft (60.96m)], maximum rotation radius occurs.

LinkBelt Cranes

138 HSL

5676 (supersedes 5665)-0915-P8

Tailswing Radius
14' 2 (4.32m)

10' 6
(3.20m)
36
(0.91m)

18' 11.5 (5.97m) Extended


13' 10.5 (4.23m) Retracted
17' 0 (5.18m) Extended
11' 11.0 (3.63m) Retracted
14' 0.5 (4.28m)
10' 6.3 (3.21m)

39
(0.99m)

15.2
(0.39m)
14' 0 (4.27m) Extended
8' 11 (2.72m) Retracted

138 HSL

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Base Crane

Base Crane
Length 1
Length 2
Length 3
Height
Weight:
Tube Boom
Angle Boom

20 ft 2 in
37 ft 6 in
2 ft 6 in
11 ft 0 in

(6.15m)
(11.43m)
(0.76m)
(3.35m)

89,923 lb
90,674 lb

(39 971kg)
(40 291kg)

L1

L3

L2

Side Frames

Side Frames
Length
Width
Height
Weight

20 ft 2 in
36 in
39 in
19,700 lb

(6.15m)
(0.91m)
(0.99m)
(8 936kg)

Number inside black circle = # of components

LinkBelt Cranes

138 HSL

5676 (supersedes 5665)-0915-P8

Upper Counterweights
A Slab Counterweight
Length
Width
Height
Weight

46 in
10 ft 6 in
6 ft 6.25 in
23,305 lb

(1.17m)
(3.20m)
(1.99m)
(10 571kg)

B Slab Counterweight
Length
Width
Height
Weight

46 in
10 ft 6 in
23 in
16,944 lb

(1.17m)
(3.20m)
(0.58m)
(7 686kg)

C Slab Counterweight
Length
Width
Height
Weight

43.50 in
10 ft 6 in
25.50 in
12,071 lb

(1.10m)
(3.20m)
(0.65m)
(5 475kg)

H
Number inside black circle = # of components

138 HSL

LinkBelt Cranes

5676 (supersedes 5665)-0915-P8

Boom
54 in (1.37m) x 44 in (1.12m)
Tube Boom Extensions
58.88 (1.50m)

10' 4
(3.15m)
N6P0001

10 ft (3.05m) Extension
Weight: 514 lb (233kg)

N6P0001

48
(1.22m)
58.88 (1.50m)
20' 4 (6.20m)

20 ft (6.10m) Extension
Weight: 856 lb (388kg)

N6P0001

N6P0001

48
(1.22m)
58.88 (1.50m)
30' 4 (9.25m)

30 ft (9.14m) Extension

N6P0001

Weight: 1,212 lb (550kg)

45.7 in (1.16m) x 45.7 in (1.16m)


Angle Boom Extensions

10 ft (3.05m) Extension
Weight: 847 lb (384kg)

N6P0001

48
(1.22m)

58.50 (1.49m)

10' 4
(3.15m)

52
(1.32m)
58.50 (1.49m)
20' 4 (6.20m)

20 ft (6.10m) Extension
Weight: 1,424 lb (646kg)

52
(1.32m)
58.50 (1.49m)
30' 4 (9.25m)

30 ft (9.14m) Extension
Weight: 2,067 lb (938kg)

LinkBelt Cranes

52
(1.32m)

138 HSL

10

5676 (supersedes 5665)-0915-P8

20 ft (6.10m) Tube Boom


Top Section
Length
Width
Deep
Height
Weight

21 ft 11 in
57.13 in
44 in
51 in
2,350 lb

(6.68m)
(1.45m)
(1.12m)
(1.30m)
(1 066kg)

20 ft (6.10m) Angle Boom


Top Section
Length
Width
Deep
Height
Weight

22 ft 5 in
49.06 in
45.7 in
50 in
2,930 lb

(6.83m)
(1.25m)
(1.16m)
(1.27m)
(1 329kg)

20 ft (6.10m) Tube Boom


Base Section
Length
20 ft 6 in
Width
58.87 in
Deep
44 in
Height
61 in
Weight
w/o Self Assembly
w/ Self Assembly

(6.25m)
(1.50m)
(1.12m)
(1.55m)

1,780 lb (807kg)
2,210 lb (1 002kg)

20 ft (6.10m) Angle Boom


Base Section
Length
20 ft 6 in
Width
50.60 in
Deep
45.7 in
Height
61 in
Weight
w/o Self Assembly
w/ Self Assembly

(6.25m)
(1.29m)
(1.16m)
(1.55m)
2,531 lb (1 148kg)
2,961 lb (1 343kg)

Number inside black circle = # of components


* - Optional equipment

138 HSL

LinkBelt Cranes

11

5676 (supersedes 5665)-0915-P8

Auxiliary Tip Extension*


Length
Width
Height
Weight

70.35 in
24.50 in
42.91 in
720 lb

(1.79m)
(0.62m)
(1.09m)
(327kg)

Jib
15 ft (4.57m) Jib
Top Section*

Length
16 ft 1.50 in (4.91m)
Width
34.50 in
(0.88m)
Height
26.50 in
(0.67m)
Weight
544 lb
(247kg)
Weight includes pendants and hardware.

15 ft (4.57m) Jib
Base Section*

Length
15 ft 3.50 in (4.66m)
Width
34.50 in
(0.88m)
Height 1
26.50 in
(0.67m)
Height 2
54.50 in
(1.38m)
Weight
936 lb
(425kg)
Weight includes pins, basic frontstay & backstay
pendants, and hardware.

H2
H1

15 ft (4.57m) Jib
Extension*

Length
15 ft 2.50 in (4.64m)
Width
34.50 in
(0.88m)
Height
26.50 in
(0.67m)
Weight
330 lb
(150kg)
Weights includes pins, pendants, and hardware.

Number inside black circle = # of components


* - Optional equipment

LinkBelt Cranes

138 HSL

12

5676 (supersedes 5665)-0915-P8

Hook Balls
15 Ton (13.6mt) Swivel
Hook Ball*
Width
Height
Weight

17.50 in
40.50 in
767 lb

(0.44m)
(1.03m)
(348kg)

15 Ton (13.6mt) Non-Swivel


Hook Ball*

Width
Height
Weight

18 in
39.50 in
748 lb

(0.46m)
(1.00m)
(339kg)

Number inside black circle = # of components


* - Optional equipment

138 HSL

LinkBelt Cranes

13

5676 (supersedes 5665)-0915-P8

Hook Blocks

50 Ton (45.4mt)
4-Sheave Hook Block*
Width1
Width2
Width3
Height
Weight

22.75 in
20.25 in
18.75 in
54.00 in
1,221 lb

W1

W2

(0.58m)
(0.51m)
(0.48m)
(1.37m)
(554kg)

W3

W1

80 Ton (72.6mt)
4-Sheave Hook Block*
Width1
Width2
Width3
Height
Weight

24.75 in
18.25 in
20.25 in
60.00 in
1,221 lb

W2

(0.63m)
(0.46m)
(0.51m)
(1.52m)
(554kg)

W3
Number inside black circle = # of components
* - Optional equipment

Working Weights
Based on basic crane including Isuzu AH-6HK1X diesel engine, turntable bearing, live
mast, 14 part boom hoist reeving, backstops, crawler lower with 36 in (0.91m) wide
track shoes, sealed track rollers, and catwalks, plus the following:

Ctwt A

Ctwt AB

Ctwt ABC

lb
(kg)

lb
(kg)

lb
(kg)

Lifting crane - includes 40 ft (12.19m) basic tube boom, self assembly cylinder, 700 ft
(213.36m) of 16mm type DB front hoist rope, 700 ft (213.36m) of 16mm type DB rear
hoist rope, 80 Ton (72.6mt) hook block, and basic pendants.

116,388
(52 793)

133,332
(60 478)

145,403
(65 954)

psi

7.41

8.49

9.26

kg/cm2

0.52

0.60

0.65

Ground Bearing Pressure

LinkBelt Cranes

138 HSL

14

5676 (supersedes 5665)-0915-P8

Transport Weights
Base Crane: Telescoping Boom Backstops, 27 gal (102.2L) Of Fuel, Side Frames, Catwalks, Handrails, 20' (6.10m) Tube Base Section, 22' (6.71m)
Live Mast with Bridle, 14-Part Boom Hoist Reeving, 700' (213.36m) Type DB Front Hoist Rope, and 700' (213.36m) Type DB Rear Hoist Rope.
Gross Weight

Item Description

Transport Loads

lb

kg

#1

Base Crane

89,923

40 788

Add A Counterweight

23,305

10 571

Add B Counterweight

16,944

7 685

Add C Counterweight

12,071

5 475

Add Hydraulic Third Drum Without Rope

1,345

610

Add 20' (6.10m) Tube Top Section

#2

#3
1

2,350

1 066

Add 10' (3.05m) Tube Extension With Pins And Pendants

692

314

Add 20' (6.10m) Tube Extension With Pins And Pendants

1,093

496

Add 30' (9.14m) Tube Extension With Pins and Pendants

1,490

676

Add 20' (6.10m) Angle Base Section

2,531

1 148

Add 20' (6.10m) Angle Top Section With 4 Lifting Sheaves

2,930

1 329

Add 20' (6.10m) Angle Top Section With 3 Lifting Sheaves

2,830

1 284

Add 20' (6.10m) Angle Top Section With 2 Lifting Sheaves

2,730

1 238

Add 10' (3.05m) Angle Extension With Pins And Pendants

1,025

465

Add 20' (6.10m) Angle Extension With Pins And Pendants

1,660

753

Add 30' (9.14m) Angle Extension With Pins and Pendants

2,345

1 069

1
1

760

345

1,480

671

Add 15' (4.57m) Tube Jib Extension

330

150

Add 5' (1.52m) Auxiliary Tip Extension

720

327

Add Holding Rope - 7/8 in X 165' (50.29m) Type DB

234

106

Add Closing Rope - 7/8 in X 220' (67.06m) Type DB

312

142

Add Inhaul Rope - 7/8 in X 105' (32.00m) Type M

141

64

Add Hoist Rope - 7/8 in X 210' (64.01m) Type LB

298

135

Add Tagline Winder


Add 30' (9.14m) Tube Jib

Add Jib Wire Rope - 7/8 in X 700' (213.36m) Type RB

1,050

476

Add 3rd Drum Wire Rope - 16mm X 385' (117.35m) Type ZB

312

142

Add 3rd Drum Wire Rope - 16mm X 385' (117.35m) Type WB

296

134

Add 15-ton (13.6mt) Hook Ball - Non Swivel

748

339

Add 15-ton (13.6mt) Hook Ball - Swivel

767

348

Add 50-ton (45.3mt) 4 Sheave Hook Block

1,221

554

Add 80-ton (72.6mt) 4 Sheave Hook Block

1,221

554

430

195

Add Quick Draw


Remove 20' (6.10m) Tube Base Section

1,780

807

Remove Front Hoist Rope - 7/8 in X 700' (213.36m) Type DB

-994

-451

Remove Rear Hoist Rope - 7/8 in X 700' (213.36m) Type DB


Remove 22' (6.71m) Live Mast with Bridle
Remove 27 gal (102.2L) Of Fuel

-994

-451

-2,212

-1 003

-84

-185

Approximate Total Shipping Weight

lb

89,923

37,443

29,813

kg

40 788

16 984

13 523

Notes:
Estimated weights vary by 2%. Numbers in the transport loads columns represent quantities.
Estimated transport loads assume the load out consist of 200' (60.96m) of tube boom and 60' (18.29m) of jib with full counterweight.
Support loads were targeted at 45,000 lb (20 412kg), 8' 6 (2.6m) wide, 48' (14.6m) long, and 13' 6 (4.1m) high using a drop deck trailer. This may vary depending on
state laws, empty truck/trailer weights, and style of trailer.

138 HSL

LinkBelt Cranes

15

5676 (supersedes 5665)-0915-P8

Transport Drawings - Tube Boom


12' 10.75
(3.93m)

34
(0.86m)

LOAD #1 - 89,923 lb (40 788kg)


Base crane

13' 7.25
(4.14m)

34
(0.86m)

LOAD #2 - 37,443 lb (16 984kg)


B & C counterweights, 20 ft (6.10m) tube boom top section, 20 ft (6.10m) tube boom
extension with pins and pendants, two 30 ft (9.14m) tube boom extensions with pins and
pendants, 15 ton (13.6mt) non-swivel hook ball, and 80 ton (72.6mt) 4 sheave hook block.

12' 7.75
(3.85m)

LOAD #3 - 29,813 lb (13 522kg)

34
(0.86m) A counterweight and cylinders, 10 ft (3.05m) tube boom extension with pins and pendants, 20 ft

(6.10m) tube boom extension with pins and pendants, 30 ft (9.14m) tube boom extension with pins
and pendants, 30 ft (9.14m) basic tube jib, and two 15 ft (4.57m) tube jib extensions.

LinkBelt Cranes

138 HSL

16

5676 (supersedes 5665)-0915-P8

Load Hoist Performance


Front or Rear Drum - 7/8 in (22.4mm) Wire Rope
Rope
Layer

Maximum Line Pull

No Load Line Speed

Full Load Line Speed

Pitch Diameter

Layer

Total

lb

kg

ft/min

m/min

ft/min

m/min

in

mm

ft

ft

31,182

14 144

328

100

63

19

20.1

510

115.6

35.2

115.6

35.2

29,019

13 163

353

107

68

21

21.8

555

124.3

37.9

239.9

73.1

27,138

12 309

377

115

73

22

23.6

600

132.9

40.5

372.9

113.7

25,485

11 560

401

122

77

24

25.4

644

141.6

43.2

514.5

156.8

24,022

10 896

426

130

82

25

27.1

689

150.2

45.8

664.7

202.6

22,718

10 305

450

137

87

26

28.9

734

158.9

48.4

823.6

251.0

Boom Hoist Drum - 5/8 in (16mm) Wire Rope


Rope
Layer

Maximum Line Pull

No Load Line Speed

Full Load Line Speed

Pitch Diameter

Layer

Total

lb

kg

ft/min

m/min

ft/min

m/min

in

mm

ft

ft

23,754

10 775

209

64

40

12

18.3

466

62.3

19.0

62.3

19.0

22,453

10 184

221

67

43

13

19.6

498

65.9

20.1

128.3

39.1

21,246

9 637

234

71

45

14

20.9

530

69.9

21.3

198.2

60.4

20,199

9 162

246

75

47

14

22.1

562

73.5

22.4

271.7

82.8

19,251

8 732

258

79

50

15

23.4

594

77.1

23.5

348.8

106.3

18,387

8 340

270

82

52

16

24.6

626

80.7

24.6

429.5

130.9

Front Mounted Third Drum - 5/8 in (16mm) Wire Rope


Rope
Layer

Maximum Line Pull

No Load Line Speed

Full Load Line Speed

Pitch Diameter

Layer

Total

lb

kg

ft/min

m/min

ft/min

m/min

in

mm

ft

ft

15,041

6 823

159

48.6

31

9.4

11.3

286

58

17.6

58

17.6

13,538

6 141

177

54.0

34

10.4

12.5

318

64

19.6

122

37.2

12,308

5 583

195

59.4

38

11.5

13.8

349

71

21.5

192

58.7

11,282

5 118

213

64.8

41

12.5

15.0

381

77

23.5

269

82.1

10,415

4 724

230

70.2

44

13.6

16.3

413

83

25.4

353

107.5

9,671

4 387

248

75.6

48

14.6

17.5

445

90

27.4

443

134.9

Rear Mounted Fourth Drum - 7/8 in (22.4mm) Wire Rope


Rope
Layer

Maximum Line Pull

No Load Line Speed

Full Load Line Speed

Pitch Diameter

Layer

Total

lb

kg

ft/min

m/min

ft/min

m/min

in

mm

ft

ft

35,570

16 134

287

87

55

17

20.1

510

99.7

30.4

99.7

30.4

33,104

15 016

308

94

59

18

21.8

555

107.3

32.7

207.0

63.1

30,957

14 042

330

100

64

19

23.6

600

114.8

35.0

321.9

98.1

29,072

13 187

351

107

68

21

25.4

644

122.4

37.3

444.2

135.4

27,403

12 430

372

114

72

22

27.1

689

129.6

39.5

573.8

174.9

Diameter
Wire Rope Application

Max. Permissible Load

in

mm

Type

Boom Hoist

--

16

Front Drum

7/8

Rear Drum (Optional)

Wire Rope Descriptions

lb

kg

LB

11,770

5 339

6 Strand, Compacted Strand, Seale or Warrington Seale, I.W.R.C.,


Preformed, Right Lay, Regular Lay

--

DB

22,740

10 315

6 X 26 (6 X 19 Class), Warrington Seale, E.I.P.S., Preformed, Right


Regular Lay, I.W.R.C.

7/8

--

RB

17,520

7 947

18 X 19 Rotation Resistant Compacted Strand - High Strength Preformed, Right Regular Lay

Rear Drum (Optional)

7/8

--

DB

22,740

10 315

6 X 26 (6 X 19 Class), Warrington Seale, E.I.P.S., Preformed, Right


Regular Lay, I.W.R.C.

Third Drum (Optional)

5/8

--

ZB

11,080

5 026

34 X 7 Non-Rotating, E.I.P.S., Right Regular or Left Lang Lay

Third Drum (Optional)

5/8

--

WB

13,650

6 192

8 Strand, Preformed, Regular Lay

Fourth Drum (Optional)

7/8

--

DB

15,920

7 221

18 X 19 Rotation Resistant Compacted Strand - High Strength Preformed, Right Regular Lay

138 HSL

LinkBelt Cranes

17

5676 (supersedes 5665)-0915-P8

Working Areas

360

Over Side

Boom

Over Drive End

Over Idler End

See Note

Center Of
Rotation
Longitudinal
Of Crawler

See
Note

Idler Sprocket

Drive Sprocket

Over Side

Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.

LinkBelt Cranes

138 HSL

18

5676 (supersedes 5665)-0915-P8

Attachments
Offset
Jib

Auxiliary Tip
Extension

Main
Boom
Main
Boom

40-150 ft
(12.19-45.72m)
Main Angle Boom

40-200 ft
(12.19-60.96m)
Main Tube Boom

Main
Boom

40-190 ft (12.19-57.91m) 40-180 ft (12.19-54.86m) Main


Main Tube Boom With
Tube Boom With 30-60 ft
Tip Extension
(9.14-18.29m) Offset Jib

138 HSL

LinkBelt Cranes

19

5676 (supersedes 5665)-0915-P8

Tube Boom Make-up


10 (3.05)

50 (15.24)

60 (18.29)

20 (6.10)

1
1

90 (27.43)

1
1

100 (30.48)
110 (33.53)

2
1

130 (39.62)

170 (51.82)
180 (54.86)

190 (57.91)
200 (60.96)

2
3

150 (45.72)
160 (48.77)

1
2

120 (36.58)
140 (42.67)

30 (9.14)

70 (21.34)
80 (24.38)

Optional Auxiliary
Tip Extension

Tube Boom Extensions ft (m)

Boom
Length
ft (m)
40 (12.19)

3
1

Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb /
1 metric ton = 0.45 kips) and are not more than 75% of the
tipping loads with the crane standing level on firm
supporting surface. A deduction must be made from these
capacities for weight of hook block, hook ball, sling,
grapple, load weighing device, etc. When using main hook
while jib or tip extension is attached, reduce capacities by
values shown in Crane Rating Manual. See Operator's
Manual for all limitations when raising or lowering
attachment.
2. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
3. For recommended reeving, parts of line, wire rope type,
and wire rope inspection, see Wire Rope Capacity
Chart, Operator's Manual, and Parts Manual.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. The 22 ft (6.71m) live mast must be used for all capacities
listed.
6. The least stable rated condition is over the side.
7. Booms must be erected and lowered over the end for
maximum stability.
8. Main boom length must not exceed 200 ft (60.96m).

LinkBelt Cranes

9. Do not operate at radii and boom lengths where the


Crane Rating Manual lists no capacity. Do not use
longer booms or jibs than those listed in the Crane
Rating Manual. Any of the above can cause a tipping
condition, or boom and jib failure.
10. These capacities are in compliance with ASME/ANSI
B30.5 at date of manufacture.
11. These capacities apply only to the crane as originally
manufactured and normally equipped by LinkBelt
Construction Equipment Company.

138 HSL

20

5676 (supersedes 5665)-0915-P8

Tube Boom Working Range Diagram


40-200' Tube Boom
Maximum Boom Angle
80
See Note 2.
210'

70

200'

200'

190'

60

190'

180'

180'

170'

50

170'

160'

160'

150'
140'

150'

40

Main Boom Length

130'

120'

120'

110'

30

110'

100'

100'

90'

90'

80'

20

70'

Height Above Ground

140'

130'

80'
70'

60'

60'

50'

50'

40'

40'
30'
Minimum Boom Angle
See Note 2.

20'
10'
0'

C
L of Rotation
Notes:
1.
2.

20'

40'

60'

80'

100'

120'

140'

160'

180'

200'

Operating Radius from Centerline of Rotation

Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

138 HSL

LinkBelt Cranes

21

5676 (supersedes 5665)-0915-P8

Tube Boom Load Chart


Tube Boom Lift Capacity Chart - 360 Rotation
ABC = 52,320 lb (23 732kg) Counterweight - Side Frames Extended
[All capacities are listed in kips (mt)]
Boom Length - ft (m)

Load
Radius
ft (m)

40
(12.2)

11
(3.4)

160.0
(72.6)

12
(3.7)

160.0
(72.6)

160.0
(72.6)

13
(4.0)

151.8
(68.9)

151.6
(68.8)

14
(4.3)

141.6
(64.2)

141.4
(64.1)

141.1
(64.0)

15
(4.6)

132.6
(60.1)

132.4
(60.1)

132.2
(60.0)

16
(4.9)

124.7
(56.6)

124.5
(56.5)

124.3
(56.4)

123.9
(56.2)

17
(5.2)

117.6
(53.3)

117.5
(53.3)

117.3
(53.2)

117.0
(53.1)

18
(5.5)

111.1
(50.4)

111.2
(50.4)

111.0
(50.3)

110.7
(50.2)

109.0
(49.4)

19
(5.8)

101.7
(46.1)

101.9
(46.2)

102.0
(46.3)

102.1
(46.3)

102.1
(46.3)

99.3
(45.0)

20
(6.1)

93.7
(42.5)

93.9
(42.6)

94.0
(42.6)

94.1
(42.7)

94.1
(42.7)

94.0
(42.6)

25
(7.6)

67.0
(30.4)

67.1
(30.4)

67.2
(30.5)

67.2
(30.5)

67.1
(30.4)

30
(9.1)

51.8
(23.5)

51.9
(23.5)

52.0
(23.6)

52.0
(23.6)

35
(10.7)

42.0
(19.1)

42.2
(19.1)

42.2
(19.1)

40
(12.2)

35.1
(15.9)

35.3
(16.0)
26.3
(11.9)

50
(15.2)
60
(18.3)
70
(21.3)

50
(15.2)

60
(18.3)

70
(21.3)

80
(24.4)

90
(27.4)

100
(30.5)

110
(33.5)

120
(36.6)

67.1
(30.4)

67.0
(30.4)

66.9
(30.3)

66.8
(30.3)

51.9
(23.5)

51.8
(23.5)

51.7
(23.5)

51.6
(23.4)

51.5
(23.4)

51.4
(23.3)

42.1
(19.1)

42.1
(19.1)

42.0
(19.1)

41.9
(19.0)

41.8
(19.0)

41.6
(18.9)

41.5
(18.8)

35.3
(16.0)

35.3
(16.0)

35.2
(16.0)

35.1
(15.9)

35.0
(15.9)

34.9
(15.8)

34.7
(15.7)

34.6
(15.7)

26.4
(12.0)

26.4
(12.0)

26.3
(11.9)

26.2
(11.9)

26.0
(11.8)

25.9
(11.7)

25.8
(11.7)

25.6
(11.6)

20.8
(9.4)

20.7
(9.4)

20.6
(9.3)

20.4
(9.3)

20.3
(9.2)

20.2
(9.2)

20.0
(9.1)

16.9
(7.7)

16.7
(7.6)

16.6
(7.5)

16.5
(7.5)

16.3
(7.4)

16.2
(7.3)

14.0
(6.4)

13.8
(6.3)

13.7
(6.2)

13.5
(6.1)

13.4
(6.1)

11.7
(5.3)

11.6
(5.3)

11.4
(5.2)

11.3
(5.1)

9.9
(4.5)

9.8
(4.4)

9.6
(4.4)

8.4
(3.8)

8.3
(3.8)

80
(24.4)
90
(27.4)
100
(30.5)
110
(33.5)
120
(36.6)

130
(39.6)

7.1
(3.2)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

LinkBelt Cranes

138 HSL

22

5676 (supersedes 5665)-0915-P8

Tube Boom Lift Capacity Chart - 360 Rotation


ABC = 52,320 lb (23 732kg) Counterweight - Side Frames Extended
[All capacities are listed in kips (mt)]
Boom Length - ft (m)

Load
Radius
ft (m)

140
(42.7)

150
(45.7)

30
(9.1)

51.3
(23.3)

50.5
(22.9)

35
(10.7)

41.4
(18.8)

40
(12.2)

160
(48.8)

170
(51.8)

180
(54.9)

190
(57.9)

200
(61.0)

41.2
(18.7)

41.1
(18.6)

37.6
(17.1)

36.6
(16.6)

34.5
(15.6)

34.3
(15.6)

34.2
(15.5)

33.9
(15.4)

33.9
(15.4)

31.1
(14.1)

27.5
(12.5)

50
(15.2)

25.5
(11.6)

25.3
(11.5)

25.2
(11.4)

25.0
(11.3)

24.8
(11.2)

24.6
(11.2)

23.9
(10.8)

60
(18.3)

19.9
(9.0)

19.7
(8.9)

19.5
(8.8)

19.3
(8.8)

19.2
(8.7)

19.0
(8.6)

18.8
(8.5)

70
(21.3)

16.0
(7.3)

15.9
(7.2)

15.7
(7.1)

15.5
(7.0)

15.3
(6.9)

15.2
(6.9)

15.0
(6.8)

80
(24.4)

13.2
(6.0)

13.1
(5.9)

12.9
(5.9)

12.7
(5.8)

12.5
(5.7)

12.4
(5.6)

12.2
(5.5)

90
(27.4)

11.1
(5.0)

10.9
(4.9)

10.8
(4.9)

10.6
(4.8)

10.4
(4.7)

10.2
(4.6)

10.0
(4.5)

100
(30.5)

9.4
(4.3)

9.3
(4.2)

9.1
(4.1)

8.9
(4.0)

8.7
(3.9)

8.6
(3.9)

8.4
(3.8)

110
(33.5)

8.1
(3.7)

7.9
(3.6)

7.7
(3.5)

7.6
(3.4)

7.4
(3.4)

7.2
(3.3)

7.0
(3.2)

120
(36.6)

7.0
(3.2)

6.8
(3.1)

6.6
(3.0)

6.5
(2.9)

6.3
(2.9)

6.1
(2.8)

5.9
(2.7)

130
(39.6)

6.0
(2.7)

5.9
(2.7)

5.7
(2.6)

5.5
(2.5)

5.3
(2.4)

5.2
(2.4)

5.0
(2.3)

5.1
(2.3)

4.9
(2.2)

4.7
(2.1)

4.5
(2.0)

4.4
(2.0)

4.2
(1.9)

4.2
(1.9)

4.0
(1.8)

3.9
(1.8)

3.7
(1.7)

3.5
(1.6)

3.4
(1.5)

3.3
(1.5)

3.1
(1.4)

2.9
(1.3)

2.7
(1.2)

2.6
(1.2)

2.4
(1.1)

2.1
(1.0)

1.9
(0.9)

140
(42.7)
150
(45.7)
160
(48.8)
170
(51.8)
180
(54.9)
190
(57.9)

1.5
(0.7)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

138 HSL

LinkBelt Cranes

23

5676 (supersedes 5665)-0915-P8

Angle Boom Make-up


Angle Boom Extensions ft (m)

Boom
Length
ft (m)
40 (12.19)

10 (3.05)

50 (15.24)

60 (18.29)

20 (6.10)

70 (21.33)
80 (24.38)

1
1

90 (27.43)

1
1

100 (30.48)
110 (33.53)

140 (42.67)
150 (45.72)

1
2

120 (36.58)
130 (39.62)

30 (9.14)

2
1

Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb /
1 metric ton = 0.45 kips) and are not more than 75% of the
tipping loads with the crane standing level on firm
supporting surface. A deduction must be made from these
capacities for weight of hook block, hook ball, sling,
grapple, load weighing device, etc. When using main hook
while jib or tip extension is attached, reduce capacities by
values shown in Crane Rating Manual. See Operator's
Manual for all limitations when raising or lowering
attachment.
2. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
3. For recommended reeving, parts of line, wire rope type,
and wire rope inspection, see Wire Rope Capacity
Chart, Operator's Manual, and Parts Manual.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. The 22 ft (6.71m) live mast must be used for all capacities
listed.
6. The least stable rated condition is over the side.
7. Booms must be erected and lowered over the end for
maximum stability.
8. Main boom length must not exceed 150 ft (45.72m).

LinkBelt Cranes

138 HSL

24

5676 (supersedes 5665)-0915-P8

Angle Boom Working Range


Diagram
40-150' Angle Boom
Maximum Boom Angle
See Note 2.

80
160'

70

150'

150'

60

140'

140'
130'
50

130'

120'
120'
110'
40

110'

Main Boom Length

100'
90'
90'

30

80'

80'
70'
70'
60'

20
60'

Height Above Ground

100'

50'
50'
40'
40'
30'
Minimum Boom Angle
See Note 2.

20'
10'
0'

20'

40'

60'

80'

100'

120'

140'

160'

CL of Rotation
Notes:
1.
2.

Operating Radius from Centerline of Rotation

Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

138 HSL

LinkBelt Cranes

25

5676 (supersedes 5665)-0915-P8

Angle Boom Load Chart


Angle Boom Lift Capacity Chart - 360 Rotation
ABC = 52,320 lb (23 732kg) Counterweight - Side Frames Extended
[All capacities are listed in kips (mt)]
Boom Length - ft (m)

Load
Radius
ft (m)

40
(12.2)

11
(3.4)

160.0
(72.6)

12
(3.7)

160.0
(72.6)

142.4
(64.6)

13
(4.0)

151.3
(68.6)

137.9
(62.6)

14
(4.3)

141.1
(64.0)

132.8
(60.2)

121.7
(55.2)

15
(4.6)

132.1
(59.9)

129.4
(58.7)

118.6
(53.8)

16
(4.9)

124.2
(56.3)

123.9
(56.2)

116.4
(52.8)

105.6
(47.9)

17
(5.2)

117.1
(53.1)

116.9
(53.0)

113.5
(51.5)

103.0
(46.7)

18
(5.5)

110.7
(50.2)

110.6
(50.2)

109.2
(49.5)

101.0
(45.8)

93.7
(42.5)

19
(5.8)

101.3
(45.9)

101.4
(46.0)

101.5
(46.0)

98.5
(44.7)

92.0
(41.7)

84.3
(38.2)

20
(6.1)

93.3
(42.3)

93.4
(42.4)

93.5
(42.4)

93.4
(42.4)

88.5
(40.1)

82.7
(37.5)

25
(7.6)

66.5
(30.2)

66.6
(30.2)

66.6
(30.2)

66.6
(30.2)

66.5
(30.2)

30
(9.1)

51.3
(23.3)

51.4
(23.3)

51.4
(23.3)

51.3
(23.3)

35
(10.7)

41.6
(18.9)

41.6
(18.9)

41.6
(18.9)

40
(12.2)

34.7
(15.7)

34.8
(15.8)
25.8
(11.7)

50
(15.2)
60
(18.3)
70
(21.3)
80
(24.4)

50
(15.2)

60
(18.3)

70
(21.3)

80
(24.4)

90
(27.4)

100
(30.5)

110
(33.5)

120
(36.6)

130
(39.6)

140
(42.7)

150
(45.7)

66.3
(30.1)

66.2
(30.0)

65.3
(29.6)

61.1
(27.7)

51.2
(23.2)

51.0
(23.1)

50.9
(23.1)

50.7
(23.0)

50.5
(22.9)

50.3
(22.8)

49.3
(22.4)

44.6
(20.2)

41.5
(18.8)

41.3
(18.7)

41.2
(18.7)

41.0
(18.6)

40.8
(18.5)

40.6
(18.4)

40.4
(18.3)

40.2
(18.2)

39.9
(18.1)

34.7
(15.7)

34.6
(15.7)

34.5
(15.6)

34.3
(15.6)

34.1
(15.5)

33.9
(15.4)

33.7
(15.3)

33.5
(15.2)

33.3
(15.1)

33.1
(15.0)

25.8
(11.7)

25.7
(11.7)

25.5
(11.6)

25.3
(11.5)

25.1
(11.4)

24.9
(11.3)

24.7
(11.2)

24.5
(11.1)

24.3
(11.0)

24.0
(10.9)

20.3
(9.2)

20.1
(9.1)

19.9
(9.0)

19.7
(8.9)

19.5
(8.8)

19.3
(8.8)

19.1
(8.7)

18.9
(8.6)

18.6
(8.4)

18.4
(8.3)

16.5
(7.5)

16.1
(7.3)

15.9
(7.2)

15.7
(7.1)

15.5
(7.0)

15.3
(6.9)

15.0
(6.8)

14.8
(6.7)

14.5
(6.6)

13.1
(5.9)

12.9
(5.9)

12.7
(5.8)

12.5
(5.7)

12.2
(5.5)

12.0
(5.4)

11.7
(5.3)

10.8
(4.9)

10.6
(4.8)

10.3
(4.7)

10.1
(4.6)

9.9
(4.5)

9.6
(4.4)

8.9
(4.0)

8.7
(3.9)

8.4
(3.8)

8.2
(3.7)

7.9
(3.6)

7.3
(3.3)

7.1
(3.2)

6.8
(3.1)

6.6
(3.0)

6.0
(2.7)

5.7
(2.6)

5.5
(2.5)

4.8
(2.2)

4.5
(2.0)

90
(27.4)
100
(30.5)
110
(33.5)
120
(36.6)
130
(39.6)
140
(42.7)

3.7
(1.7)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

LinkBelt Cranes

138 HSL

26

5676 (supersedes 5665)-0915-P8

Jib Attachment Make-up


Jib
Length
ft (m)

Jib Extensions

Basic Frontstay
Pendants
Required

Pairs Of Frontstay
Extension Pendants
Required

15 ft (4.57 m)

63 ft 5 in (19.33m)

14 ft 6 in (4.42m)

30 (9.15)

45 (13.72)

60 (18.29)

Notes:
1. Capacities shown are in kips/metric tons (1 kip = 1,000 lb /
1 metric ton = 0.45 kips) and are not more than 75% of the
tipping loads with the crane standing level on a firm
supporting surface.
2. A deduction must be made from these capacities for the
weight of the main boom hook block or hook ball, jib hook
block or hook ball, slings, grapples, load weighing devices,
etc. When using main hook while jib is attached, reduce
capacities by values shown in Crane Rating Manual. See
Operator's Manual for all limitations when raising or
lowering attachment.
3. The capacities in the shaded areas are based on structural
strength. The capacities in the non-shaded areas are
based on stability ratings.
4. Load ratings are based on freely suspended loads and
make no allowances for such factors as the effect of the
wind, ground conditions, and operating speeds. The
operator shall therefore reduce load ratings in order to
take these conditions into account. Refer to the Crane
Rating Manual for Wind Speed Restrictions.
5. These capacities are for ABC counterweight.
6. These capacities are for 360 working areas.
7. These capacities are for 30-60 ft (9.15-18.28m) jib
lengths only.
8. The jib cannot be used on tube boom lengths over 180 ft
(54.86m) and angle boom lengths over 150 ft (45.72m).
9. The least stable rated condition is over the side.
10. These capacities are in compliance with ASME/ANSI
B30.5 at date of manufacture.
11. These capacities apply only to the crane as originally
manufactured and normally equipped by LinkBelt
Construction Equipment Company.

138 HSL

LinkBelt Cranes

27

5676 (supersedes 5665)-0915-P8

Tube Boom + Jib Working Range


Diagram
40-180' Tube Boom + 30-60' Jib
80
Maximum Boom Angle
See Note 2.
Jib Length

15

25
250'

60'
70

240'

45'

230'
60

30'

220'
210'
200'

50

190'

180'

180'

170'

160'

150'

150'

Main Boom Length

140'

140'

130'

30

120'

130'
120'

110'

110'

100'

100'

90'
20

80'

Height Above Ground

170'

40

160'

90'
80'

70'

70'

60'

60'

50'

50'

40'

40'
Minimum Boom Angle
See Note 2.

30'
20'
10'

Notes:
1.
2.

20'
C
L of Rotation

40'

60'

80'

100'

120'

140'

160'

180'

200'

220'

240'

0'

Operating Radius from Centerline of Rotation

Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

LinkBelt Cranes

138 HSL

28

5676 (supersedes 5665)-0915-P8

Tube Boom + Jib Load Charts


Tube Boom + 30 ft (9.14m) Offset Jib Length - 360 Rotation
ABC [52,320 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

20

24.0

20

20

(6.1)

(10.9)

(6.1)

(6.1)

25

24.0

25

24.0

25

(7.6)

(10.9)

(7.6)

(10.9)

(7.6)

Main Boom Length ft (m)


40
(12.2)

30

24.0

24.0

24.0

30

24.0

30

19.8

(9.1)

(10.9)

(10.9)

(10.9)

(9.1)

(10.9)

(9.1)

(9.0)

80
(24.3)

35

24.0

24.0

24.0

35

23.8

24.0

24.0

35

17.8

20.6

(10.7)

(10.9)

(10.9)

(10.9)

(10.7)

(10.8)

(10.9)

(10.9)

(10.7)

(8.1)

(9.3)

100
(30.5)

40

24.0

24.0

24.0

24.0

40

21.2

24.0

24.0

40

17.0

19.2

20.2

(12.2)

(10.9)

(10.9)

(10.9)

(10.9)

(12.2)

(9.6)

(10.9)

(10.9)

(12.2)

(7.7)

(8.7)

(9.2)

140
(42.7)

50

21.1

24.0

24.0

24.0

18.1

50

17.4

23.2

24.0

24.0

17.1

50

14.8

17.3

18.0

19.6

(15.2)

(9.6)

(10.9)

(10.9)

(10.9)

(8.2)

(15.2)

(7.9)

(10.5)

(10.9)

(10.9)

(7.8)

(15.2)

(6.7)

(7.8)

(8.2)

(8.9)

180
(54.9)

60

17.4

20.7

20.4

19.7

17.4

60

16.3

21.0

20.7

20.0

16.3

60

13.3

16.1

17.1

18.0

14.6

(18.3)

(7.9)

(9.4)

(9.3)

(8.9)

(7.9)

(18.9)

(7.4)

(9.5)

(9.4)

(9.1)

(7.4)

(18.9)

(6.0)

(7.3)

(7.8)

(8.2)

(6.6)

70

16.9

16.5

15.8

15.1

70

17.1

16.8

16.1

15.4

70

14.8

15.8

16.4

14.0

(21.3)

(7.7)

(7.5)

(7.2)

(6.8)

(21.3)

(7.8)

(7.6)

(7.3)

(7.0)

(21.3)

(6.7)

(7.2)

(7.4)

(6.4)

80

14.1

13.7

13.0

12.3

80

14.2

13.9

13.2

12.6

80

13.8

14.1

13.5

12.8

(24.4)

(6.4)

(6.2)

(5.9)

(5.6)

(24.8)

(6.4)

(6.3)

(6.0)

(5.7)

(24.8)

(6.3)

(6.4)

(6.1)

(5.8)

90

12.0

11.6

10.9

10.1

90

12.1

11.8

11.1

10.4

90

11.9

11.2

10.6

(27.4)

(5.4)

(5.3)

(4.9)

(4.6)

(27.4)

(5.5)

(5.4)

(5.0)

(4.7)

(27.4)

(5.4)

(5.1)

(4.8)

100

10.3

10.0

9.2

8.4

100

10.4

10.1

9.4

8.6

100

10.1

9.5

8.8

(30.5)

(4.7)

(4.5)

(4.2)

(3.8)

(30.5)

(4.7)

(4.6)

(4.3)

(3.9)

(30.5)

(4.6)

(4.3)

(4.0)

110

8.6

7.8

7.1

110

8.7

8.0

7.3

110

8.1

7.4

(33.5)

(3.9)

(3.5)

(3.2)

(33.5)

(3.9)

(3.6)

(3.3)

(33.5)

(3.7)

(3.4)

120

7.5

6.7

5.9

120

6.8

6.1

120

6.9

6.3

(36.6)

(3.4)

(3.0)

(2.7)

(36.6)

(3.1)

(2.8)

(36.6)

(3.1)

(2.9)

130

5.8

5.0

130

5.9

5.2

130

6.0

5.3

(39.6)

(2.6)

(2.3)

(39.6)

(2.7)

(2.4)

(39.6)

(2.7)

(2.4)

140

5.0

4.2

140

5.1

4.3

140

4.4

(42.7)

(2.3)

(1.9)

(42.7)

(2.3)

(2.0)

(4267)

(2.0)

150

4.3

3.5

150

4.4

3.6

150

3.7

(45.7)

(2.0)

(1.6)

(45.7)

(2.0)

(1.6)

(45.7)

(1.7)

160

3.7

2.9

160

3.0

160

3.1

(48.8)

(1.7)

(1.3)

(48.8)

(1.4)

(4887)

(1.4)

170

2.4

170

2.5

170

(51.8)

(1.1)

(51.8)

(1.1)

(51.8)

180

2.0

180

2.0

180

(54.9)

(0.9)

(54.9)

(0.9)

(54.9)

190

190

190

(57.9)

(57.9)

(57.9)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

138 HSL

LinkBelt Cranes

29

5676 (supersedes 5665)-0915-P8

Tube Boom + 45 ft (13.7m) Offset Jib Length - 360 Rotation


ABC [52,320 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

25

24.0

25

25

(7.6)

(10.9)

(7.6)

(7.6)

30

24.0

24.0

30

19.2

30

(9.1)

(10.9)

(10.9)

(9.1)

(8.7)

(9.1)

35

21.8

24.0

24.0

35

17.3

35

(10.7)

(9.9)

(10.9)

(10.9)

(10.7)

(7.8)

(10.7)

Main Boom Length ft (m)


40
(12.2)

40

19.1

24.0

24.0

24.0

40

16.7

18.2

40

12.6

(12.2)

(8.7)

(10.9)

(10.9)

(10.9)

(12.2)

(7.6)

(8.3)

(12.2)

(5.7)

80
(24.3)

100
(30.5)

50

16.7

20.8

22.9

22.2

15.9

50

13.6

17.2

17.3

18.4

50

10.6

12.3

12.9

(15.2)

(7.6)

(9.4)

(10.4)

(10.1)

(7.2)

(15.2)

(6.2)

(7.8)

(7.8)

(8.3)

(15.2)

(4.8)

(5.6)

(5.9)

140
(42.7)

60

13.7

17.5

19.7

19.4

15.3

60

11.5

14.8

16.2

17.2

13.8

60

9.2

11.0

11.6

12.6

(18.3)

(6.2)

(7.9)

(8.9)

(8.8)

(6.9)

(18.9)

(5.2)

(6.7)

(7.3)

(7.8)

(6.3)

(18.9)

(4.2)

(5.0)

(5.3)

(5.7)

180
(54.9)

70

11.7

16.6

16.7

16.0

14.6

70

10.0

13.1

14.3

15.8

13.3

70

8.2

9.9

10.6

11.6

11.3

(21.3)

(5.3)

(7.5)

(7.6)

(7.3)

(6.6)

(21.3)

(4.5)

(5.9)

(6.5)

(7.2)

(6.0)

(21.3)

(3.7)

(4.5)

(4.8)

(5.3)

(5.1)

80

10.2

14.2

13.9

13.1

12.4

80

11.7

12.9

13.5

12.7

80

9.1

9.8

10.8

10.8

(24.4)

(4.6)

(6.4)

(6.3)

(5.9)

(5.6)

(24.8)

(5.3)

(5.9)

(6.1)

(5.8)

(24.8)

(4.1)

(4.4)

(4.9)

(4.9)

90

12.1

11.7

11.0

10.2

90

10.6

11.7

11.3

10.6

90

8.5

9.1

10.1

10.5

(27.4)

(5.5)

(5.3)

(5.0)

(4.6)

(27.4)

(4.8)

(5.3)

(5.1)

(4.8)

(27.4)

(3.9)

(4.1)

(4.6)

(4.8)

100

10.5

10.1

9.3

8.5

100

9.8

10.2

9.6

8.9

100

7.9

8.5

9.5

9.2

(30.5)

(4.8)

(4.6)

(4.2)

(3.9)

(30.5)

(4.4)

(4.6)

(4.4)

(4.0)

(30.5)

(3.6)

(3.9)

(4.3)

(4.2)

110

9.1

8.7

7.9

7.2

110

9.1

8.9

8.2

7.5

110

8.1

8.4

7.7

(33.5)

(4.1)

(3.9)

(3.6)

(3.3)

(33.5)

(4.1)

(4.0)

(3.7)

(3.4)

(33.5)

(3.7)

(3.8)

(3.5)

120

8.0

7.6

6.8

6.0

120

7.7

7.0

6.3

120

7.2

6.5

(36.6)

(3.6)

(3.4)

(3.1)

(2.7)

(36.6)

(3.5)

(3.2)

(2.9)

(36.6)

(3.3)

(2.9)

130

6.7

5.9

5.1

130

6.8

6.1

5.3

130

6.2

5.5

(39.6)

(3.0)

(2.7)

(2.3)

(39.6)

(3.1)

(2.8)

(2.4)

(39.6)

(2.8)

(2.5)

140

5.1

4.3

140

5.2

4.5

140

5.3

4.7

(42.7)

(2.3)

(2.0)

(42.7)

(2.4)

(2.0)

(4267)

(2.4)

(2.1)

150

4.4

3.6

150

4.5

3.8

150

4.6

3.9

(45.7)

(2.0)

(1.6)

(45.7)

(2.0)

(1.7)

(45.7)

(2.1)

(1.8)

160

3.8

3.0

160

3.9

3.2

160

3.3

(48.8)

(1.7)

(1.4)

(48.8)

(1.8)

(1.5)

(4887)

(1.5)

170

3.3

2.5

170

2.6

170

2.7

(51.8)

(1.5)

(1.1)

(51.8)

(1.2)

(51.8)

(1.2)

180

2.0

180

2.2

180

(54.9)

(0.9)

(54.9)

(1.0)

(54.9)

190

1.6

190

1.7

190

(57.9)

(0.7)

(57.9)

(0.8)

(57.9)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

LinkBelt Cranes

138 HSL

30

5676 (supersedes 5665)-0915-P8

Tube Boom + 60 ft (18.3m) Offset Jib Length - 360 Rotation


ABC [52,320 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

140
(42.7)

180
(54.9)

Load
Radius
ft (m)

30

21.2

30

30

(9.1)

(9.6)

(9.1)

(9.1)

35

18.3

23.0

35

35

(10.7)

(8.3)

(10.4)

(10.7)

(10.7)

40

17.3

20.4

22.3

40

13.8

40

(12.2)

(7.8)

(9.3)

(10.1)

(12.2)

(6.3)

(12.2)

Main Boom Length ft (m)


40
(12.2)

50

13.8

17.3

18.3

19.0

50

11.2

13.4

14.3

50

8.6

(15.2)

(6.3)

(7.8)

(8.3)

(8.6)

(15.2)

(5.1)

(6.1)

(6.5)

(15.2)

(3.9)

80
(24.3)

100
(30.5)

60

11.3

15.3

17.1

17.2

13.4

60

9.4

11.6

12.4

13.9

60

7.4

8.4

8.8

(18.3)

(5.1)

(6.9)

(7.8)

(7.8)

(6.1)

(18.9)

(4.3)

(5.3)

(5.6)

(6.3)

(18.9)

(3.4)

(3.8)

(4.0)

140
(42.7)

180
(54.9)

70

9.6

13.0

14.7

15.2

12.9

70

8.1

10.1

11.0

12.4

11.2

70

6.5

7.6

8.0

8.6

8.9

(21.3)

(4.4)

(5.9)

(6.7)

(6.9)

(5.9)

(21.3)

(3.7)

(4.6)

(5.0)

(5.6)

(5.1)

(21.3)

(2.9)

(3.4)

(3.6)

(3.9)

(4.0)

80

8.3

11.3

12.8

13.2

12.3

80

7.1

9.0

9.8

11.2

10.8

80

5.8

6.9

7.3

8.0

8.5

(24.4)

(3.8)

(5.1)

(5.8)

(6.0)

(5.6)

(24.8)

(3.2)

(4.1)

(4.4)

(5.1)

(4.9)

(24.8)

(2.6)

(3.1)

(3.3)

(3.6)

(3.9)

90

7.3

10.0

11.3

11.1

10.3

90

6.4

8.1

8.9

10.3

10.2

90

6.3

6.7

7.4

7.9

(27.4)

(3.3)

(4.5)

(5.1)

(5.0)

(4.7)

(27.4)

(2.9)

(3.7)

(4.0)

(4.7)

(4.6)

(27.4)

(2.9)

(3.0)

(3.4)

(3.6)

100

9.0

10.1

9.4

8.6

100

7.4

8.1

9.4

9.0

100

5.9

6.3

6.9

7.5

(30.5)

(4.1)

(4.6)

(4.3)

(3.9)

(30.5)

(3.4)

(3.7)

(4.3)

(4.1)

(30.5)

(2.7)

(2.9)

(3.1)

(3.4)

110

8.1

8.8

8.0

7.2

110

6.8

7.5

8.3

7.6

110

5.5

5.9

6.5

7.1

(33.5)

(3.7)

(4.0)

(3.6)

(3.3)

(33.5)

(3.1)

(3.4)

(3.8)

(3.4)

(33.5)

(2.5)

(2.7)

(2.9)

(3.2)

120

7.4

7.7

6.9

6.1

120

6.3

7.0

7.1

6.4

120

5.6

6.2

6.7

(36.6)

(3.4)

(3.5)

(3.1)

(2.8)

(36.6)

(2.9)

(3.2)

(3.2)

(2.9)

(36.6)

(2.5)

(2.8)

(3.0)

130

6.9

6.7

6.0

5.2

130

6.5

6.2

5.5

130

5.3

5.7

5.7

(39.6)

(3.1)

(3.0)

(2.7)

(2.4)

(39.6)

(2.9)

(2.8)

(2.5)

(39.6)

(2.4)

(2.6)

(2.6)

140

6.0

5.2

4.4

140

6.1

5.3

4.6

140

5.5

4.9

(42.7)

(2.7)

(2.4)

(2.0)

(42.7)

(2.8)

(2.4)

(2.1)

(4267)

(2.5)

(2.2)

150

5.3

4.5

3.7

150

4.6

3.9

150

4.8

4.1

(45.7)

(2.4)

(2.0)

(1.7)

(45.7)

(2.1)

(1.8)

(45.7)

(2.2)

(1.9)

160

3.9

3.1

160

4.0

3.3

160

4.1

3.5

(48.8)

(1.8)

(1.4)

(48.8)

(1.8)

(1.5)

(4887)

(1.9)

(1.6)

170

3.4

2.6

170

3.5

2.7

170

2.9

(51.8)

(1.5)

(1.2)

(51.8)

(1.6)

(1.2)

(51.8)

(1.3)

180

2.9

2.1

180

3.0

2.2

180

2.4

(54.9)

(1.3)

(1.0)

(54.9)

(1.4)

(1.0)

(54.9)

(1.1)

190

1.7

190

1.8

190

(57.9)

(0.8)

(57.9)

(0.8)

(57.9)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

138 HSL

LinkBelt Cranes

31

5676 (supersedes 5665)-0915-P8

Angle Boom + Jib Working Range


Diagram
40-150' Angle Boom + 30-60' Jib
80
Maximum Boom Angle
See Note 2.

25
15

Jib Length

5
220'

60'

70

210'

45'

200'

60

190'

30'

180'

50

170'

150'

40

140'

140'

Main Boom Length

130'

130'

120'

120'

30

110'

110'

100'

100'

90'

90'

80'

80'

20

70'

Height Above Ground

160'

150'

70'

60'

60'

50'
Minimum Boom Angle
See Note 2.

40'

50'
40'
30'
20'
10'

Notes:
1.
2.

20'
C
L of Rotation

40'

60'

80'

100'

120'

140'

160'

180'

200'

0'
220'

Operating Radius from Centerline of Rotation

Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent
radius, and boom angle change must be accounted for when applying load to hook.
Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.

LinkBelt Cranes

138 HSL

32

5676 (supersedes 5665)-0915-P8

Angle Boom + Jib Load Charts


Angle Boom + 30 ft (9.14m) Offset Jib Length - 360 Rotation
ABC [52,319 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

20

24.0

20

20

(6.1)

(10.9)

(6.1)

(6.1)

25

24.0

25

24.0

25

(7.6)

(10.9)

(7.6)

(10.9)

(7.6)

Main Boom Length ft (m)


40
(12.2)

30

24.0

24.0

24.0

30

24.0

30

19.7

(9.1)

(10.9)

(10.9)

(10.9)

(9.1)

(10.9)

(9.1)

(8.9)

80
(24.3)

35

24.0

24.0

24.0

24.0

35

23.6

24.0

24.0

35

17.7

20.6

(10.7)

(10.9)

(10.9)

(10.9)

(10.9)

(10.7)

(10.7)

(10.9)

(10.9)

(10.7)

(8.0)

(9.3)

100
(30.5)

40

24.0

24.0

24.0

24.0

24.0

40

21.0

24.0

24.0

24.0

40

16.9

19.1

20.1

(12.2)

(10.9)

(10.9)

(10.9)

(10.9)

(10.9)

(12.2)

(9.5)

(10.9)

(10.9)

(10.9)

(12.2)

(7.7)

(8.7)

(9.1)

120
(36.6)

150
(45.7)

50

20.9

24.0

24.0

24.0

23.9

50

17.3

23.1

23.8

23.7

23.0

50

14.7

17.3

17.9

18.8

19.8

(15.2)

(9.5)

(10.9)

(10.9)

(10.9)

(10.8)

(15.2)

(7.8)

(10.5)

(10.8)

(10.8)

(10.4)

(15.2)

(6.7)

(7.8)

(8.1)

(8.5)

(9.0)

60

17.3

20.2

19.7

19.2

18.4

60

16.2

20.0

20.0

19.6

18.9

60

13.2

16.0

17.0

17.1

18.0

(18.3)

(7.8)

(9.2)

(8.9)

(8.7)

(8.3)

(18.9)

(7.3)

(9.1)

(9.1)

(8.9)

(8.6)

(18.9)

(6.0)

(7.3)

(7.7)

(7.8)

(8.2)

70

16.4

15.8

15.3

14.5

70

16.6

16.1

15.6

14.9

70

14.7

15.8

15.9

15.2

(21.3)

(7.4)

(7.2)

(6.9)

(6.6)

(21.3)

(7.5)

(7.3)

(7.1)

(6.8)

(21.3)

(6.7)

(7.2)

(7.2)

(6.9)

80

13.6

13.0

12.5

11.6

80

13.7

13.2

12.7

12.0

80

13.7

13.4

13.0

12.3

(24.4)

(6.2)

(5.9)

(5.7)

(5.3)

(24.8)

(6.2)

(6.0)

(5.8)

(5.4)

(24.8)

(6.2)

(6.1)

(5.9)

(5.6)

90

11.4

10.9

10.3

9.5

90

11.5

11.1

10.6

9.8

90

11.2

10.7

10.0

(27.4)

(5.2)

(4.9)

(4.7)

(4.3)

(27.4)

(5.2)

(5.0)

(4.8)

(4.4)

(27.4)

(5.1)

(4.9)

(4.5)

100

9.8

9.2

8.7

7.8

100

9.3

8.8

8.0

100

9.5

9.0

8.3

(30.5)

(4.4)

(4.2)

(3.9)

(3.5)

(30.5)

(4.2)

(4.0)

(3.6)

(30.5)

(4.3)

(4.1)

(3.8)

110

7.9

7.3

6.4

110

8.0

7.4

6.6

110

7.6

6.8

(33.5)

(3.6)

(3.3)

(2.9)

(33.5)

(3.6)

(3.4)

(3.0)

(33.5)

(3.4)

(3.1)

120

6.7

6.2

5.3

120

6.3

5.5

120

5.6

(36.6)

(3.0)

(2.8)

(2.4)

(36.6)

(2.9)

(2.5)

(36.6)

(2.5)

130

5.2

4.4

130

5.3

4.5

130

4.6

(39.6)

(2.4)

(2.0)

(39.6)

(2.4)

(2.0)

(39.6)

(2.1)

140

4.1

3.6

140

3.7

140

(42.7)

(1.9)

(1.6)

(42.7)

(1.7)

(4267)

150

2.9

150

3.0

150

(45.7)

(1.3)

(45.7)

(1.4)

(45.7)

160

1.9

160

160

(48.8)

(0.9)

(48.8)

(4887)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

138 HSL

LinkBelt Cranes

33

5676 (supersedes 5665)-0915-P8

Angle Boom + 45 ft (13.7m) Offset Jib Length - 360 Rotation


ABC [52,319 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

25

24.0

25

25

(7.6)

(10.9)

(7.6)

(7.6)

30

24.0

24.0

30

19.2

30

(9.1)

(10.9)

(10.9)

(9.1)

(8.7)

(9.1)

35

21.7

24.0

24.0

35

17.3

35

(10.7)

(9.8)

(10.9)

(10.9)

(10.7)

(7.8)

(10.7)

Main Boom Length ft (m)


40
(12.2)

40

19.0

24.0

24.0

24.0

40

16.6

18.1

40

12.5

(12.2)

(8.6)

(10.9)

(10.9)

(10.9)

(12.2)

(7.5)

(8.2)

(12.2)

(5.7)

80
(24.3)

100
(30.5)

50

16.6

20.7

21.1

21.1

21.7

50

13.5

17.1

17.3

17.5

18.3

50

10.5

12.2

12.8

(15.2)

(7.5)

(9.4)

(9.6)

(9.6)

(9.8)

(15.2)

(6.1)

(7.8)

(7.8)

(7.9)

(8.3)

(15.2)

(4.8)

(5.5)

(5.8)

120
(36.6)

150
(45.7)

60

13.7

17.4

18.3

18.5

18.7

60

11.4

14.7

16.1

16.7

17.1

60

9.2

10.9

11.6

12.1

12.7

(18.3)

(6.2)

(7.9)

(8.3)

(8.4)

(8.5)

(18.9)

(5.2)

(6.7)

(7.3)

(7.6)

(7.8)

(18.9)

(4.2)

(4.9)

(5.3)

(5.5)

(5.8)

70

11.6

16.5

16.1

15.5

14.7

70

10.0

13.0

14.3

15.1

15.3

70

8.2

9.9

10.5

11.1

11.8

(21.3)

(5.3)

(7.5)

(7.3)

(7.0)

(6.7)

(21.3)

(4.5)

(5.9)

(6.5)

(6.8)

(6.9)

(21.3)

(3.7)

(4.5)

(4.8)

(5.0)

(5.4)

80

10.1

13.8

13.2

12.7

11.9

80

11.6

12.8

13.1

12.4

80

9.1

9.7

10.3

11.0

(24.4)

(4.6)

(6.3)

(6.0)

(5.8)

(5.4)

(24.8)

(5.3)

(5.8)

(5.9)

(5.6)

(24.8)

(4.1)

(4.4)

(4.7)

(5.0)

90

11.6

11.1

10.6

9.7

90

10.6

11.4

10.9

10.1

90

8.4

9.0

9.6

10.3

(27.4)

(5.3)

(5.0)

(4.8)

(4.4)

(27.4)

(4.8)

(5.2)

(4.9)

(4.6)

(27.4)

(3.8)

(4.1)

(4.4)

(4.7)

100

10.0

9.4

8.9

8.0

100

9.7

9.6

9.1

8.4

100

7.9

8.5

9.0

8.7

(30.5)

(4.5)

(4.3)

(4.0)

(3.6)

(30.5)

(4.4)

(4.4)

(4.1)

(3.8)

(30.5)

(3.6)

(3.9)

(4.1)

(3.9)

110

8.6

8.1

7.5

6.7

110

8.7

8.2

7.7

7.0

110

8.0

7.9

7.2

(33.5)

(3.9)

(3.7)

(3.4)

(3.0)

(33.5)

(3.9)

(3.7)

(3.5)

(3.2)

(33.5)

(3.6)

(3.6)

(3.3)

120

7.0

6.4

5.5

120

7.1

6.6

5.8

120

6.7

6.0

(36.6)

(3.2)

(2.9)

(2.5)

(36.6)

(3.2)

(3.0)

(2.6)

(36.6)

(3.0)

(2.7)

130

6.0

5.5

4.6

130

5.6

4.8

130

5.0

(39.6)

(2.7)

(2.5)

(2.1)

(39.6)

(2.5)

(2.2)

(39.6)

(2.3)

140

4.7

3.8

140

4.8

4.0

140

4.2

(42.7)

(2.1)

(1.7)

(42.7)

(2.2)

(1.8)

(4267)

(1.9)

150

3.9

3.1

150

3.3

150

3.4

(45.7)

(1.8)

(1.4)

(45.7)

(1.5)

(45.7)

(1.5)

160

2.5

160

2.6

160

(48.8)

(1.1)

(48.8)

(1.2)

(4887)

170

2.0

170

170

(51.8)

(0.9)

(51.8)

(51.8)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

LinkBelt Cranes

138 HSL

34

5676 (supersedes 5665)-0915-P8

Angle Boom + 60 ft (18.3m) Offset Jib Length - 360 Rotation


ABC [52,319 lb (23,732kg)] Counterweight
[All capacities are listed in kips (mt)]
5 Offset
Load
Radius
ft (m)

15 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

25 Offset

Main Boom Length ft (m)


40
(12.2)

80
(24.3)

100
(30.5)

120
(36.6)

150
(45.7)

Load
Radius
ft (m)

30

21.2

30

30

(9.1)

(9.6)

(9.1)

(9.1)

35

18.2

22.8

35

35

(10.7)

(8.3)

(10.3)

(10.7)

(10.7)

40

17.3

20.3

20.7

20.6

40

13.7

40

(12.2)

(7.8)

(9.2)

(9.4)

(9.3)

(12.2)

(6.2)

(12.2)

Main Boom Length ft (m)


40
(12.2)

50

13.7

17.3

17.8

17.7

18.2

50

11.1

13.4

14.2

15.0

50

8.5

(15.2)

(6.2)

(7.8)

(8.1)

(8.0)

(8.3)

(15.2)

(5.0)

(6.1)

(6.4)

(6.8)

(15.2)

(3.9)

80
(24.3)

100
(30.5)

120
(36.6)

60

11.3

15.2

16.1

16.2

16.8

60

9.3

11.5

12.4

13.1

14.1

60

7.3

8.4

8.8

9.1

(18.3)

(5.1)

(6.9)

(7.3)

(7.3)

(7.6)

(18.9)

(4.2)

(5.2)

(5.6)

(5.9)

(6.4)

(18.9)

(3.3)

(3.8)

(4.0)

(4.1)

150
(45.7)

70

9.5

13.0

14.2

14.4

14.9

70

8.0

10.1

10.9

11.7

12.7

70

6.4

7.5

7.9

8.3

8.7

(21.3)

(4.3)

(5.9)

(6.4)

(6.5)

(6.8)

(21.3)

(3.6)

(4.6)

(4.9)

(5.3)

(5.8)

(21.3)

(2.9)

(3.4)

(3.6)

(3.8)

(3.9)

80

8.2

11.3

12.7

12.9

12.1

80

7.1

9.0

9.8

10.5

11.5

80

5.8

6.8

7.3

7.6

8.1

(24.4)

(3.7)

(5.1)

(5.8)

(5.9)

(5.5)

(24.8)

(3.2)

(4.1)

(4.4)

(4.8)

(5.2)

(24.8)

(2.6)

(3.1)

(3.3)

(3.4)

(3.7)

90

7.3

10.0

11.3

10.7

9.9

90

6.3

8.1

8.9

9.6

10.4

90

6.3

6.7

7.1

7.5

(27.4)

(3.3)

(4.5)

(5.1)

(4.9)

(4.5)

(27.4)

(2.9)

(3.7)

(4.0)

(4.4)

(4.7)

(27.4)

(2.9)

(3.0)

(3.2)

(3.4)

100

8.9

9.6

9.0

8.2

100

7.4

8.1

8.8

8.7

100

5.8

6.2

6.6

7.1

(30.5)

(4.0)

(4.4)

(4.1)

(3.7)

(30.5)

(3.4)

(3.7)

(4.0)

(3.9)

(30.5)

(2.6)

(2.8)

(3.0)

(3.2)

110

8.1

8.2

7.7

6.8

110

6.8

7.5

8.0

7.2

110

5.5

5.8

6.2

6.7

(33.5)

(3.7)

(3.7)

(3.5)

(3.1)

(33.5)

(3.1)

(3.4)

(3.6)

(3.3)

(33.5)

(2.5)

(2.6)

(2.8)

(3.0)

120

7.4

7.1

6.5

5.7

120

6.3

6.9

6.8

6.0

120

5.5

5.9

6.3

(36.6)

(3.4)

(3.2)

(2.9)

(2.6)

(36.6)

(2.9)

(3.1)

(3.1)

(2.7)

(36.6)

(2.5)

(2.7)

(2.9)

130

6.7

6.1

5.6

4.7

130

6.3

5.8

5.1

130

5.3

5.6

5.3

(39.6)

(3.0)

(2.8)

(2.5)

(2.1)

(39.6)

(2.9)

(2.6)

(2.3)

(39.6)

(2.4)

(2.5)

(2.4)

140

5.3

4.8

3.9

140

5.5

5.0

4.2

140

5.1

4.5

(42.7)

(2.4)

(2.2)

(1.8)

(42.7)

(2.5)

(2.3)

(1.9)

(4267)

(2.3)

(2.0)

150

4.4

4.1

3.2

150

4.3

3.5

150

3.7

(45.7)

(2.0)

(1.9)

(1.5)

(45.7)

(2.0)

(1.6)

(45.7)

(1.7)

160

3.5

2.6

160

2.8

160

3.0

(48.8)

(1.6)

(1.2)

(48.8)

(1.3)

(4887)

(1.4)

170

2.1

170

2.3

170

(51.8)

(1.0)

(51.8)

(1.0)

(51.8)

This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

138 HSL

LinkBelt Cranes

35

5676 (supersedes 5665)-0915-P8

This Page Intentionally Blank

LinkBelt Cranes

138 HSL

5676 (supersedes 5665)-0915-P8

LinkBelt Construction Equipment Company Lexington, Kentucky

www.linkbelt.com

LinkBelt is a registered trademark. Copyright 2015. We are constantly improving our products and therefore reserve the right to change designs and specifications.

138 HSL

LinkBelt Cranes

You might also like