2016 Braindump2go 1Z0-060 Exam Dumps 161q&as 1-10

Guarantee All Exams 100% Pass One Time!
2016 NEW 1Z0-060: Upgrade to Oracle

Database 12c Exam Questions and
Answers RELEASED in
Braindump2go.com Online IT Study
Website Today
2016 Braindump2go Valid Oracle 1Z0-060 Exam
Preparation Materials:
1.| Latest
161Q&As 1Z0-060 PDF Dumps and VCE Dumps:
http://www.braindump2go.com/1z0-060.html
[Guarantee 100% Exam Pass!]

QUESTION 1
You notice that the performance of your production 24/7 Oracle database significantly degraded.
Sometimes you are not able to connect to the instance because it hangs.
You do not want to restart the database instance.
How can you detect the cause of the degraded performance?
A. Enable Memory Access Mode, which reads performance data from SGA.
B. Use emergency monitoring to fetch data directly from SGA analysis.
C. Run Automatic Database Diagnostic Monitor (ADDM) to fetch information from the latest Automatic
Workload Repository (AWR) snapshots.
D. Use Active Session History (ASH) data and hang analysis in regular performance monitoring.
E. Run ADDM in diagnostic mode.
Answer: B
QUESTION 2
You plan to use the In Database Archiving feature of Oracle Database 12c, and store rows that
are inactive for over three months, in Hybrid Columnar Compressed (HCC) format.
Which three storage options support the use of HCC?
A.
B.
C.
D.
E.
F.
G.
ASM disk groups with ASM disks consisting of Exadata Grid Disks.
ASM disk groups with ASM disks consisting of LUNS on any Storage Area Network array
ASM disk groups with ASM disks consisting of any zero padded NFS -mounted files
Database files stored in ZFS and accessed using conventional NFS mounts.
Database files stored in ZFS and accessed using the Oracle Direct NFS feature
Database files stored in any file system and accessed using the Oracle Direct NFS feature
ASM disk groups with ASM disks consisting of LUNs on Pillar Axiom Storage arrays
1Z0-060 Exam Dumps

1Z0-060 Exam Questions
1Z0-060 PDF Dumps
1Z0-060 VCE Dumps
http://www.braindump2go.com/1Z0-060.html

Answer: AEG
Explanation:
HCC requires the use of Oracle Storage Exadata(A), Pillar Axiom(G)or Sun ZFS Storage
Appliance (ZFSSA).
Note:
*Hybrid Columnar Compression, initially only available on Exadata, has been extended to
supportPillar Axiom and Sun ZFS Storage Appliance (ZFSSA) storage when used with Oracle
Database Enterprise Edition 11.2.0.3 and above
*Oracle offers the ability to manage NFS using a feature called Oracle Direct NFS (dNFS). Oracle
Direct NFS implements NFS V3 protocol within the Oracle database kernel itself. Oracle Direct
NFS client overcomes many of the challenges associated with using NFS with the Oracle
Database with simple configuration, betterperformance than traditional NFS clients, and offers
consistent configuration across platforms.
QUESTION 3
In your multitenant container database (CDB) containing pluggable databases (PDB), users
complain about performance degradation.
How does real-time Automatic database Diagnostic Monitor (ADDM) check performance
degradation and provide solutions?
A.
B.
C.
D.
It
It
It
It
collects data
collects data
collects data
collects data
from
from
from
from
SGA and compares it with a preserved snapshot.

SGA, analyzes it, and provides a report.
SGA and compares it with the latest snapshot.
both SGA and PGA, analyzes it, and provides a report.
Answer: B
Explanation:
*The multitenant architecture enables an Oracle database to function as a multitenant container
database (CDB) that includes zero, one, or many customer-created pluggable databases (PDBs).
A PDB is a portable collection of schemas, schema objects, and nonschema objects that appears
to an Oracle Net client as a non-CDB. All Oracle databases before Oracle Database 12c were
non-CDBs.
*The System Global Area (SGA) is a group of shared memory areas that are dedicated to an
Oracle "instance" (an instance is your database programs and RAM).
*The PGA (Program or Process Global Area) is a memory area (RAM) that stores data and
control information for a single process.
QUESTION 4
The tnsnames.ora file has an entry for the service alias ORCL as follows:
The TNS ping command executes successfully when tested with ORCL; however, from the same
OS user session, you are not able to connect to the database instance with the following
command:
SQL > CONNECT scott/tiger@orcl
What could be the reason for this?
A.
B.
C.
D.
E.
The
The
The
The
The
listener is not running on the database node.

TNS_ADMIN environment variable is set to the wrong value.
orcl.oracle.com database service is not registered with the listener.
DEFAULT_DOMAIN parameter is set to the wrong value in the sqlnet.ora file.
listener is running on a different port.
1Z0-060 Exam Dumps

1Z0-060 PDF Dumps
1Z0-060 VCE Dumps

Answer: C
Explanation:
Service registration enables the listener to determine whether a database service and its service
handlers are available. A service handler is a dedicated server process or dispatcher that acts as
a connection point to a database. During registration, the LREG process provides the listener with
the instance name, database service names, and the type and addresses of service handlers.
This information enables the listener to start a service handler when a client request arrives.
QUESTION 5
Examine the following steps of privilege analysis for checking and revoking excessive, unused
privileges granted to users:
1. Create a policy to capture the privilege used by a user for
privilege analysis.
2. Generate a report with the data captured for a specified privilege
capture.
3. Start analyzing the data captured by the policy.
4. Revoke the unused privileges.
5. Compare the used and unused privileges' lists.
6. Stop analyzing the data.
Identify the correct sequence of steps.
A.
B.
C.
D.
E.
1,
1,
1,
1,
1,
3,
3,
3,
3,
3,
5, 6,
6, 2,
2, 5,
2, 5,
5, 2,
2,
5,
6,
6,
6,
4
4
4
4
4
Answer: B
Explanation:
http://docs.oracle.com/database/121/DVADM/priv_analysis.htm#DVADM1013
Define the privilege analysis policy.
Enable the privilege analysis policy.
This step begins recording the privilege use that the policy defined.
Disable the privilege analysis policys recording of privilege use.
This step stops capturing the privilege use for the policy.
Generate privilege analysis results.
This step writes the results to the data dictionary views described in Privilege Analysis Policy and
Report Data Dictionary Views.
Optionally, disable and then drop the privilege analysis policy.
Dropping a privilege analysis policy deletes the data captured by the policy.
QUESTION 6
You database is running an ARCHIVELOG mode.
The following parameter are set in your database instance:
LOG_ARCHIVE_FORMAT = arch+%t_%r.arc
LOG_ARCHIVE_DEST_1 = `LOCATION = /disk1/archive'
DB_RECOVERY_FILE_DEST_SIZE = 50G
DB_RECOVERY_FILE = `/u01/oradata'
Which statement is true about the archived redo log files?
A. They are created only in the location specified by the LOG_ARCHIVE_DES T_1 parameter.
B. They are created only in the Fast Recovery Area.
C. They are created in the location specified by the LOG_ARCHIVE_DES T_1 parameter and in the
default location $ORACLE_HOME/dbs/arch.
1Z0-060 Exam Dumps

1Z0-060 PDF Dumps
1Z0-060 VCE Dumps

D. They are created in the location specified by the LOG_ARCHIVE_DES T_1 parameter and the location
specified by the DB_RECOVERY_FILE_DES T parameter.
Answer: A
Explanation:
You can choose to archive redo logs to a single destination or to multiple destinations.
Destinations can be local--within the local file system or an Oracle Automatic Storage
Management (Oracle ASM) disk group--or remote (on a standby database). When you archive to
multiple destinations, a copy of each filled redo log file is written to each destination. These
redundant copies help ensure that archived logs are always available in the event of a failure at
one of the destinations. To archive to only a single destination, specify that destination using the
LOG_ARCHIVE_DES TandLOG_ARCHIVE_DUPLE X_DES Tinitialization parameters.
ARCHIVE_DEST initialization parameter. To archive to multiple destinations, you can c hoose to
archive to two or more locations using the LOG_ARCHIVE_DES T_n initialization parameters, or
to archive only to a primary and secondary destination using the LOG_ ARCHIVE_DEST and
LOG_ARCHIVE_DUPLE X_DES T initialization parameters.
QUESTION 7
Your multitenant container database (CDB) is running in ARCHIVELOG mode. You connect to
the CDB RMAN.
Examine the following command and its output:
You execute the following command:
RMAN > BACKUP DATABASE PLUS ARCHIVELOG;
Which data files will be backed up?
A.
B.
C.
D.
Data
Data
Data
Data
files
files
files
files
that
that
that
that
belong
belong
belong
belong
to only the root container

to the root container and all the pluggable databases (PDBs)
to only the root container and PDB$SEED
to the root container and all the PDBs excluding PDB$SEED
Answer: B
Explanation:
Backing Up a Whole CDB
Backing up a whole CDB is similar to backing up a non-CDB. When you back up a whole CDB,
RMAN backs up the root, all the PDBs, and the archived redo logs.
You can then recover either the whole CDB, the root only, or one or more PDBs from the CDB
backup.
Note:
*You can back up and recover a whole CDB, the root only, or one or more PDBs.
*Backing Up Archived Redo Logs with RMAN
Archived redo logs are the key to successful media recovery. Back them up regularly. You can
back up logs with BACKUP ARCHIVELOG, or back up logs while backing up datafiles and control
files by specifying BACKUP ... PLUS ARCHIVELOG.
QUESTION 8
You are administering a database stored in Automatic Storage management (ASM). The files are
stored in the DATA disk group. You execute the following command:
SQL > ALTER DISKGROUP data ADD ALIAS `+data/prod/myfile.dbf' FOR `+data.231.45678';
What is the result?
A. The file `+data.231.45678' is physically relocated to `+data/prod' and renamed as `myfile.dbf'.
B. The file `+data.231.45678' is renamed as `myfile.dbf', and copied to `+data/prod'.
1Z0-060 Exam Dumps

1Z0-060 PDF Dumps
1Z0-060 VCE Dumps

C. The file `+data.231.45678' remains in the same location andasynonym'myfile.dbf' is created.
D. The file `myfile.dbf' is created in `+data/prod' and the reference to `+data.231.45678' in the data
dictionary removed.
Answer: C
Explanation:
ADD ALIAS
Use this clause to create an alias name for an Oracle ASM filename. The alias_name consists of
the full directory path and the alias itself.
QUESTION 9
Which three functions are performed by the SQL Tuning Advisor?
A.
B.
C.
D.
E.
Building and implementing SQL profiles

Recommending the optimization of materialized views
Checking query objects for missing and stale statistics
Recommending bitmap, function-based, and B-tree indexes
Recommending the restructuring of SQL queries that are using bad plans
Answer: ACE
Explanation:
The SQL Tuning Advisor takes one or more SQL statements as an input and invokes the
Automatic Tuning Optimizer to perform SQL tuning on the statements. The output of the SQL
Tuning Advisor is in the form of an advice or recommendations, along with a rationale for
eachrecommendation and its expected benefit. The recommendation relates to collection of
statistics on objects(C), creation of new indexes, restructuring of the SQL statement(E), or
creation of a SQL profile(A). You can choose to accept the recommendation to complete the
tuning of the SQL statements.
QUESTION 10
Examine the following command:
ALTER SYSTEM SET enable_ddl_logging=FALSE;
Which statement is true?
A. None of the data definition language (DDL) statements are logged in the trace file.
B. Only DDL commands that resulted in errors are logged in the alert log file.
C. A new log.xml file that contains the DDL statements is created, and the DDL command details are
removed from the alert log file.
D. Only DDL commands that resulted in the creation of new database files are logged.
Answer: A
Explanation:
ENABLE_DDL_LOGGING enables or disables the writing of a subset of data definition language
(DDL) statements to a DDL alert log.
The DDL log is a file that has the same format and basic behavior as the alert log, but it only
contains the DDL statements issued by the database. The DDL log is created only for the
RDBMS component and only if the ENABLE_DDL_LOGGING initialization parameter is set to
true. When this parameter is set to false, DDL statements are not included in any log.
1Z0-060 Exam Dumps

1Z0-060 PDF Dumps
1Z0-060 VCE Dumps

2016 Braindump2go 1Z0-060 Exam Dumps 161q&as 1-10

Uploaded by

Copyright:

Available Formats

2016 Braindump2go 1Z0-060 Exam Dumps 161q&as 1-10

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2016 Braindump2go 1Z0-060 Exam Dumps 161q&as 1-10

Uploaded by

Copyright:

Available Formats

Guarantee All Exams 100% Pass One Time!

2016 NEW 1Z0-060: Upgrade to Oracle

161Q&As 1Z0-060 PDF Dumps and VCE Dumps:

[Guarantee 100% Exam Pass!]

1Z0-060 Exam Dumps

Guarantee All Exams 100% Pass One Time!

SGA and compares it with a preserved snapshot.

listener is not running on the database node.

1Z0-060 Exam Dumps

Guarantee All Exams 100% Pass One Time!

1Z0-060 Exam Dumps

Guarantee All Exams 100% Pass One Time!

to only the root container

1Z0-060 Exam Dumps

Guarantee All Exams 100% Pass One Time!

Building and implementing SQL profiles

1Z0-060 Exam Dumps

You might also like