29-Horizontal Subsea Xmas Tree en

BOMCOs horizontal subsea Xmas tree, quipped with
combined electrohydraulic control and ROV control, has the

functions of automatic alignment for installation, valve
activation, unlocking and retrieval. It is applicable to deep water
operation and can help achieve safe and controllable subsea oil
& gas production.
Horizontal
Subsea Xmas Tree
www.cnpc.com.cn
9 Dongzhimen North Street, Dongcheng District, Beijing 100007, P. R. China
Subsea Xmas tree is the core equipment in offshore oil & gas
production system. Installed on subsea wellhead, the tree is
used to connect and support tubing string, seal off casing
pipes and casing-tubing annulus, isolate borehole fluids from
external sea water, control wellhead production pressure, and
adjust borehole flow rates. Also, the tree can be used for acid
fracturing, water injection, and testing.
With proper integration of mechanical, hydraulic and electronic
techniques, BOMCO Horizontal Subsea Xmas Tree features
high automation and reliable performance. Meeting
requirements specified in API 6A, API 17D, API 17H, NACE MR
0175 and other relevant standards, the tree can operate at
water depth up to 1,500m, working pressures up to 69MPa
and with designed service life of 20 years.
Structure and Operation Mechanisms
Technical Features
With EHXT (Enhanced Horizontal Xmas Tree) structure,

BOMCO subsea tree is mainly composed of tree body,
production module, annulus module, choke module, subsea
control module, hydraulic connector, tubing hanger, etc. The
tree cap does not bear any pressure and is used only for
secondary locking of the hanger and for isolation of seawater.
The tubing hanger, which is installed within the Xmas Tree, has
metal-to-metal sealing with electrohydraulic penetrator. With
two wireline plugs installed, the tubing hanger may have
double sealing over production channels. Workover operation
can be conducted by tripping in tools through tubing hanger
as long as the Xmas Tree cap and wireline plugs are retrieved.
Specification
Structure
Horizontal (EHXT)
Applicable standards
ISO 13628-4 / API 17D
API product specification level
PSL3 (tubing hanger PSL 3G)
Material class
HH (production), EE (annulus)
Temperature rating
Upstream production choke: 0F-250F (U)

Downstream production choke: -200F-250F (P-U)
Pressure rating
69 MPa (10,000 psi)
Water depth rating
1,500 m (5,000 ft)
Control line pressure
LP: 21 MPa (3,000 psi)

HP: 69MPa (1,0000 psi)
Control fluid and cleanliness
Water-based fluid, NAS 1638, Level 6
Hybrid penetrator
Eight hydraulic lines and one 4-pin electrical line
Production nominal bore
5-1/8"
Electrical-hydraulic
penetrator
Crossover valve
MQC
Front view of the subsea tree
Xmas tree cap
Subsea tubing hanger

Wireline plug
Xmas tree body

Master production valve
Workover valve
Subsea control module

Production module
Annulus module
Production wing valve
Choke valve
Wellhead hydraulic connector
Annulus wing valve
Annulus nominal bore
2-1/16"
Subsea choke
With subsea retrievable/re-installable choke insert
Subsea control module
Electrohydraulic control, retrievable
Wellhead connector
Hydraulic control
Installation
Without guide rope
Designed service life
20 years
Dimensions (W*L*H)
(543850684357) mm
Weight
50 Tonnes
Master annulus valve

Subsea wellhead device
Section view of the subsea tree
Framework module design is adopted for the structure of

the subsea tree, to enable individual module optimization
and fast customization.
The penetrator uses an integrated electrical-hydraulic
connector to enable underwater ROV control, with up to 8
hydraulic/chemical injection ports and one cable channel.
The hydraulic connector is of self-sealing plug type and the
electrical connector is of wet type, which is adaptable to
offshore use. In addition, the penetrator is equipped with
secondary unlocking mechanism to ensure proper retrieval
in case of emergency.
Major production and annulus valves are designed with
built-in structures to be embedded within the tree body or
each module. Compared with stand-alone valves, such
valves are characterized by compact structure and reliable
sealing, with no bolt connection required.
All valves on the subsea tree are ROV mechanically
controlled, or hydraulically controlled through connection of
ROV with Hot Stab. To facilitate ROV control over all valves,
all the valve switches or Hot Stab hydraulic injection ports
are properly integrated on the ROV control panel of the
subsea tree. Key valves are fault free type with re-set spring.
All sealing elements in flow channels of the subsea tree are
full metallic sulfur-resistant type with auxiliary non-metallic
sealing, so as to achieve redundant design for sealing of
flow channels, and ensure reliability and longer service life of
sealing elements within corrosive environment.
The subsea tubing hanger can be installed after proper
seating of the horizontal Xmas tree, and can be locked
inside the tree. To avoid accidental unlocking due to
vibration, pressure fluctuation and other causes during oil &
gas production, the tubing hanger is equipped with
secondary locking mechanism to ensure proper locking of
the hanger with the subsea tree.
The hydraulic connector adopts hydraulic locking and
unlocking devices, with secondary unlocking mechanism
also available.

29-Horizontal Subsea Xmas Tree en

Uploaded by

Copyright:

Available Formats

29-Horizontal Subsea Xmas Tree en

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

29-Horizontal Subsea Xmas Tree en

Uploaded by

Copyright:

Available Formats

BOMCOs horizontal subsea Xmas tree, quipped with

combined electrohydraulic control and ROV control, has the

Subsea Xmas Tree

Structure and Operation Mechanisms

With EHXT (Enhanced Horizontal Xmas Tree) structure,

ISO 13628-4 / API 17D

API product specification level

PSL3 (tubing hanger PSL 3G)

Upstream production choke: 0F-250F (U)

69 MPa (10,000 psi)

Water depth rating

1,500 m (5,000 ft)

Control line pressure

LP: 21 MPa (3,000 psi)

Control fluid and cleanliness

Water-based fluid, NAS 1638, Level 6

Eight hydraulic lines and one 4-pin electrical line

Production nominal bore

Front view of the subsea tree

Xmas tree cap

Subsea tubing hanger

Xmas tree body

Subsea control module

Production wing valve

Wellhead hydraulic connector

Annulus wing valve

Annulus nominal bore

With subsea retrievable/re-installable choke insert

Subsea control module

Electrohydraulic control, retrievable

Without guide rope

Designed service life

Master annulus valve

Section view of the subsea tree

Framework module design is adopted for the structure of

You might also like