Data Sheet

Cisco Aironet 1230AG Series 802.11A/B/G Access Point

Cisco Aironet 1230AG Series Access Points deliver the versatility, high capacity, security, and enterprise-class
features demanded by WLAN customers. These IEEE 802.11a/b/g access points are designed specifically for challenging
RF environments such as factories, warehouses, and large retail establishments that require the antenna versatility
associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range.

The Cisco Aironet 1230AG Series is a component of the Cisco Unified Wireless Network, a comprehensive solution that delivers an integrated,
end-to-end wired and wireless network. Using the radio and network management features of the Cisco Unified Wireless Network for simplified
deployment, the Cisco Aironet 1230AG Series extends the security, scalability, reliability, ease of deployment, and manageability available in wired
networks to the wireless LAN.
The Cisco Aironet 1230AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access
Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When
configured with LWAPP, the Cisco Aironet 1230AG Series can automatically detect the best-available Cisco wireless LAN controller and download
appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and
may optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the CiscoWorks
WLSE, deliver a core set of features and may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as
requirements evolve.
AWARD-WINNING SECURITY
The Cisco Aironet 1230AG Series is listed on the National Institute of Standards and Technology (NIST) FIPS 140-2 Pre-Validation List and
is in process for Information Assurance validation under the National Information Assurance Partnership (NIAP) Common Criteria program
The Cisco Aironet 1230AG Series supports 802.11i, Wi-Fi Protected Access (WPA), WPA2, and numerous Extensible Authentication Protocol
(EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN security. These certifications support
IEEE 802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and Advanced Encryption Standard
(AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different
manufacturers.
All contents are Copyright 19922006 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 10

The Cisco Aironet 1230AG Series hardware-accelerated AES encryption supports enterprise-class, government-grade secure encryption over the
WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the network.
Backward compatibility and support for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet
1230AG Series.
Cisco Aironet 1230AG Series Access Points operating with LWAPP support Cisco Unified Intrusion Detection System/Intrusion Prevention System
(IDS/IPS), a software feature that is part of the Cisco Self-Defending Network and is the industrys first integrated wired and wireless security
solution. Cisco Unified IDS/IPS takes a comprehensive approach to securityat the wireless edge, wired edge, WAN edge, and through the data
center. When an associated client sends malicious traffic through the Cisco Unified Wireless Network, a Cisco wired IDS device detects the attack
and sends shun requests to Cisco wireless LAN controllers, which will then disassociate the client device.
Autonomous or unified Cisco Aironet 1230AG Series Access Points support management frame protection for the authentication of 802.11
management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users
impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access point and reports
will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
APPLICATIONS
Designed for rugged environments and installations that require antenna versatility, the Cisco Aironet 1230AG Series features antenna connectors
for extended range or coverage versatility and more flexible installation options. Manufacturing applications, for example, can place WLANs in
hazardous locations and remotely place antennas in the hazardous locations while securing the Cisco Aironet 1230AG Series access points within
the wiring closet. The two remain connected via low-loss antenna cables.
The metal housing and industrial-grade components of the Cisco Aironet 1230AG Series provide the ruggedness and extended operating temperature
range required in factories, warehouses, big box retail environments and similar facilities. High transmit power, receive sensitivity and delay spread
for both 2.4 GHz and 5 GHz radios provide the long range and large coverage area consistent with these applications.
Access points may be placed above ceilings or suspended ceilings, allowing antennas to be discreetly placed below drop ceilings. The UL 2043
rating of the Cisco Aironet 1230AG Series allows the access points to be placed above ceilings in plenum areas regulated by municipal fire codes.
Public access applications such as large hotel buildings may also present a challenging RF environment; the antenna versatility of the Cisco Aironet
1230AG Series, together with industry-leading range and coverage, provides reliable performance for the most demanding environments.
FEATURES AND BENEFITS
Table 1 lists the features and benefits of Cisco Aironet 1230AG Series access points.
Table 1.

Features and Benefits of Cisco Aironet 1230AG Series Access Points

Feature

Benefit

Dual 802.11a and 802.11g Radios

Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and compatibility
with older 802.11b clients.

Dual RP-TNC Antenna Connectors for

Both 2.4-GHz and 5-GHz Radios

Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas, providing range and
coverage versatility.

Link-Role Flexibility

Autonomous access points can function as an access point or bridge, whether set up as a singleband or dual-band platform, allowing each radio to be individually configured as an access point
repeater, root bridge, non-root bridge, or workgroup bridge, enabling a broad array of applications.

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 11

Feature

Benefit

Cisco Unified IDS/IPS

This integrated software feature is part of the Cisco Self-Defending Network and is the industrys first
integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS
detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate
the client device.

Management Frame Protection

This feature provides for the authentication of 802.11 management frames by the wireless network
infrastructure. This allows the network to detect spoofed frames from access points or malicious
users impersonating infrastructure access points. If an access point detects a malicious attack, an
incident will be generated by the access points and reports will be gathered on the Cisco wireless
LAN controller, Cisco WCS, or CiscoWorks WLSE.

Security

Authentication
Security Standards

WPA
WPA2 (802.11i)
Cisco TKIP
Cisco message integrity check (MIC)
IEEE 802.11 WEP keys of 40 bits and 128 bits
802.1X EAP types:

EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

Protected EAP-Generic Token Card (PEAP-GTC)
PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
EAP-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (EAP-TTLS)
EAP-Subscriber Identity Module (EAP-SIM)
Cisco LEAP
Encryption:

AES-CCMP encryption (WPA2)

TKIP (WPA)
Cisco TKIP
WPA TKIP
IEEE 802.11 WEP keys of 40 bits and 128 bits
Currently Supports 12 Non-Overlapping
Channels, with Potentially up to
23 Channels

Lower potential interference with neighboring access points simplifies deployment. Fewer
transmission errors deliver greater throughput.

Rugged Metal Housing

Cast aluminum case and rugged features support deployment in factories, warehouses, the outdoors
(in a NEMA enclosure), and other industrial environments.

UL 2043 Plenum Rating and Extended

Operating Temperature

Supports installation in environmental air spaces such as areas above suspended ceilings.

Multipurpose and Lockable Mounting

Bracket

Provides greater flexibility in installation options for site specific options, as well as theft deterrence.

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 3 of 11

Feature

Benefit

Both Local and Inline Power Support

Power can be supplied using the Ethernet cable, eliminating the need for costly electrical power line
runs to remotely installed access points. The access points can be powered by Cisco inline power
switches, single port power injectors, or local power.

Hardware-Assisted AES Encryption

Provides high security without performance degradation.

SUMMARY/CONCLUSION
Cisco Aironet 1230AG Series access points feature antenna connectors for greater range or coverage versatility using a broad selection of available
Cisco antennas, as well as a rugged metal housing for operation over extended temperature ranges typical of industrial environments. Dual 802.11a
and 802.11g radios deliver a combined capacity of 108 Mbps, meeting the performance requirements of the most demanding applications, while
hardware-assisted AES encryption provides uncompromised support for interoperable IEEE 802.11i and WPA2 security.
PRODUCT SPECIFICATIONS
Table 2 lists the product specifications for Cisco Aironet 1230AG access points.
Table 2.

Product Specifications for Cisco Aironet 1230AG Access Points

Item

Specification

Part Number

AIR-AP1232AG-x-K9 (Cisco IOS Software)

AIR-LAP1232AG-x-K9 (Cisco Unified Wireless Network Software)
Note: The Cisco Aironet 1230AG Series may be ordered with Cisco IOS Software to operate as an
autonomous AP or with Cisco Unified Wireless Network Software using the Lightweight Access Point
Protocol (LWAPP). When the 1230AG is operating as a lightweight AP a WLAN controller is required.
Regulatory domains: (x = regulatory domain)

A = FCC
C = China
E = ETSI
I = Israel
K = Korea
J = TELEC (Japan) for AP 1232AG only
N = North America (Excluding FCC)
P = Japan2
S = Singapore
T = Taiwan
Customers are responsible for verifying approval for use in their individual countries. To verify approval and
to identify the regulatory domain that corresponds to a particular country, please visit:
http://www.cisco.com/go/aironet/compliance
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on
the Global Price List.

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 4 of 11

Item

Specification

Software

Cisco IOS Software Release 12.3(8)JA or later (autonomous).

Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode).
Cisco Unified Wireless Network Software Release 4.0 or later.

Data Rates Supported

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

Network Standard

IEEE 802.11a, 802.11b, and 802.11g

Uplink

Autosensing 802.3 10/100BASE-T Ethernet

Radio Module Form Factor

802.11a: CardBus (32-bit)

802.11g: Mini-PCI (32-bit)

Frequency Band and Operating

Channels

Americas (FCC)

2.412 to 2.462 GHz; 11 channels

5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels
China

2.412 to 2.472 GHz; 13 channels

5.725 to 5.825 GHz; 4 channels
ETSI

2.412 to 2.472 GHz; 13 channels

5.15 to 5.35 GHz; 8 channels
5.470 to 5.725 MHz; 11 channels
Israel

2.432 to 2.472 GHz; 9 channels

5.15 to 5.35 GHz; 8 channels
Japan (TELEC)

2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM)

2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK)
5.15 to 5.25 GHz; 4 channels
Japan-P (TELEC 2 [Japan2] Cnfg)

2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing

Korea

2.412 to 2.472 GHz; 13 channels

5.15 to 5.35, 5.46 to 5.72, 5.725 to 5.825; 19 channels
North America

2.412 to 2.462 GHz; 11 channels

5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels
Singapore

2.412 to 2.472 GHz; 13 channels

5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels
Taiwan

2.412 to 2.462 GHz; 11 channels

5.25 to 5.35 GHz; 7 channels
5.725 to 5.825 GHz; 4 channels

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 5 of 11

Item

Specification

Non-Overlapping Channels

802.11a: 12 channels (FCC; other regulatory domains support different numbers

of 802.11a channels)

FCC currently supports 12 non-overlapping channels, with potentially up to 23

channels via a future firmware release depending on FCC rules
Wireless Modulation

802.11a: OFDM
802.11g: Direct sequence spread spectrum (DSSS); OFDM

Receive Sensitivity (Typical)

802.11a

802.11g

6 Mbps: 87 dBm

6 Mbps: 90 dBm

9 Mbps: 87 dBm

9 Mbps: 84 dBm

12 Mbps: 85 dBm

12 Mbps: 82 dBm

18 Mbps: 84 dBm

18 Mbps: 80 dBm

24 Mbps: 81 dBm

24 Mbps: 77 dBm

36 Mbps: 78 dBm

36 Mbps: 73 dBm

48 Mbps: 73 dBm

48 Mbps: 72 dBm

54 Mbps: 72 dBm

54 Mbps: 72 dBm

Available Transmit Power Settings

802.11a:

802.11b:

802.11g:

(Maximum Power Setting will Vary

by Channel and According to
Individual Country Regulations)

OFDM:

CCK:

30 mW (15 dBm)

17 dBm (50 mW)

100 mW (20 dBm)

20 mW (13 dBm)

15 dBm (30 mW)

50 mW (17 dBm)

10 mW (10 dBm)

14 dBm (25 mW)

30 mW (15 dBm)

5 mW (7 dBm)

11 dBm (12 mW)

20 mW (13 dBm)

1 mW (1 dBm)

8 dBm (6 mW)

10 mW (10 dBm)

5 dBm (3 mW)

5 mW (7 dBm)

2 dBm (2 mW)

1 mW (0 dBm)

1 dBm (1 mW)

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 6 of 11

802.11b/g:
3 channels

Item

Specification

Range

Indoor:

Outdoor:

802.11a:

802.11g:

802.11a:

802.11g:

90 ft (27 m) at 54

90 ft (27 m) at 54

170 ft (52 m) at

110 ft (34 m) at 54

Mbps

225 ft (69 m) at 48
Mbps

300 ft (91 m) at 36
Mbps

350 ft (107 m) at 24
Mbps

400 ft (122 m) at 18
Mbps

450 ft (137 m) at 12
Mbps

475 ft (145 m) at 9
Mbps

500 ft (152 m) at 6
Mbps

Mbps

95 ft (29 m) at 48
Mbps

100 ft (30 m) at 36
Mbps

140 ft (43 m) at 24
Mbps

180 ft (55 m) at 18
Mbps

210 ft (64 m) at 12
Mbps

220 ft (67 m) at 11
Mbps

250 ft (76 m) at 9
Mbps

300 ft (91 m) at 6

54 Mbps

350 ft (107 m) at

Mbps

200 ft (61 m) at 48

48 Mbps

550 ft (167 m) at

Mbps

225 ft (69 m) at 36

36 Mbps

700 ft (213 m) at

Mbps

325 ft (99 m) at 24

24 Mbps

800 ft (244 m) at

Mbps

400 ft (122 m) at 18

18 Mbps

875 ft (267 m) at

Mbps

475 ft (145 m) at 12

12 Mbps

925 ft (282 m) at

Mbps

490 ft (149 m) at 11

9 Mbps

950 ft (290 m) at

Mbps

550 ft (168 m) at 9

6 Mbps

Mbps

650 ft (198 m) at 6

Mbps

310 ft (94 m) at 5.5

Mbps

660 ft (201 m) at 5.5

Mbps

Mbps

350 ft (107 m) at 2

690 ft (210 m) at 2
Mbps

Mbps

410 ft (125 m) at 1

700 ft (213 m) at 1

Mbps

Mbps

Ranges and actual throughput vary based upon numerous environmental factors so individual performance
may differ.
Compliance

Standards
Safety

UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1
UL 2043
FIPS 140-2 Pre-Validation List
Common Criteria (Cisco IOS Software only)
Radio Approvals

FCC Part 15.247

RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 33 (Japan)
2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 7 of 11

Item

Specification

ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
AS/NZS 4771, 4268.2 (Australia and New Zealand)
EMI and Susceptibility (Class B)

FCC Part 15.107 and 15.109

ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)
AS/NZS 3548
Security

802.11i, WPA2, WPA

802.1X
AES, TKIP
Other

IEEE 802.11g and IEEE 802.11a

FCC Bulletin OET-65C
RSS-102
Antennas

2.4 GHz

Dual RP-TNC connectors

5 GHz

Dual RP-TNC connectors

LEDs

Three indicators on the top panel report Ethernet activity and status, device operating status, and radio
activity and status.

Housing

Die-cast aluminum

Dimensions (H x W x D)

1.660 x 6.562 x 7.232 in. (4.22 x 16.67 x 18.37 cm); add 0.517 in. (1.31 cm) to the height for mounting
bracket

Weight

1.725lbs (0.783kg); add 0.4lbs (0.181kg) for mounting bracket

Environmental

Non-operating (storage) temperature: 40 to 185F (40 to 85C)

Operating temperature: 4 to 131F (20 to 55C)
Operating humidity: 10 to 90 percent (non-condensing)

Memory and Processor

IBM PowerPC405 (200 MHz)

16 MB RAM; 8 MB Flash memory

Input Power Requirements

90 to 240 VAC 10 percent (power supply)

48 VDC 10 percent

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 8 of 11

Item

Specification

Power Draw

13W maximum

Warranty

One year

Wi-Fi Certification

ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page.
Table 3 provides ordering information for Cisco Aironet 1230AG Series access points.
Table 3.

Product Part Numbers for Cisco Aironet 1230AG Access Points

Part Number

Product Description

AIR-AP1232AG-A-K9

802.11a/g Modular IOS AP; RP-TNC; FCC Cnfg

AIR-AP1232AG-C-K9

802.11a/g Modular IOS AP; RP-TNC; China Cnfg

AIR-AP1232AG-E-K9

802.11a/g Modular IOS AP; RP-TNC; ETSI Cnfg

AIR-AP1232AG-I-K9

802.11a/g Modular IOS AP; RP-TNC; Israel Cnfg

AIR-AP1232AG-J-K9

802.11a/g Modular IOS AP; RP-TNC; Japan

AIR-AP1232AG-K-K9

802.11a/g Modular IOS AP; RP-TNC; Korea Cnfg

AIR-AP1232AG-N-K9

802.11a/g Modular IOS AP; RP-TNC; N. America Cnfg (not FCC)

AIR-AP1232AG-P-K9

802.11a/g Modular IOS AP; RP-TNC; Japan2 Cnfg

AIR-AP1232AG-S-K9

802.11a/g Modular IOS AP; RP-TNC; Singapore Cnfg

AIR-AP1232AG-T-K9

802.11a/g Modular IOS AP; RP-TNC; Taiwan Cnfg

AIR-LAP1232AG-A-K9

802.11a/g Modular LWAPP AP; RP-TNC; FCC Cnfg

AIR-LAP1232AG-C-K9

802.11a/g Modular LWAPP AP; RP-TNC; China Cnfg

AIR-LAP1232AG-E-K9

802.11a/g Modular LWAPP AP; RP-TNC; ETSI Cnfg

AIR-LAP1232AG-I-K9

802.11a/g Modular LWAPP AP; RP-TNC; Israel Cnfg

AIR-LAP1232AG-J-K9

802.11a/g Modular LWAPP AP; RP-TNC; Japan

AIR-LAP1232AG-K-K9

802.11a/g Modular LWAPP AP; RP-TNC; Korea Cnfg

AIR-LAP1232AG-N-K9

802.11a/g Modular LWAPP AP; RP-TNC; N. America Cnfg (not FCC)

AIR-LAP1232AG-P-K9

802.11a/g Modular LWAPP AP; RP-TNC; Japan2 Cnfg

AIR-LAP1232AG-S-K9

802.11a/g Modular LWAPP AP; RP-TNC; Singapore Cnfg

AIR-LAP1232AG-T-K9

802.11a/g Modular LWAPP AP; RP-TNC; Taiwan Cnfg

2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 11

TO DOWNLOAD THE SOFTWARE

Visit the Cisco Software Center (login required) to download Cisco IOS Software.
SERVICE AND SUPPORT
Cisco Systems offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a
unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your
network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of
your business. For more information about Cisco services, visit Cisco Technical Support Services or Cisco Advanced Services.
FOR MORE INFORMATION
For more information about the Cisco Aironet 1230AG Series, visit http://www.cisco.com/go/wireless or contact your local account representative.

Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100

European Headquarters
Cisco Systems International BV
Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam
The Netherlands
www-europe.cisco.com
Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-7660
Fax: 408 527-0883

Asia Pacific Headquarters

Cisco Systems, Inc.
168 Robinson Road
#28-01 Capital Tower
Singapore 068912
www.cisco.com
Tel: +65 6317 7777
Fax: +65 6317 7799

Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on
the Cisco Website at www.cisco.com/go/offices.
Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus
Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland Israel
Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland Portugal
Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan
Thailand Turkey Ukraine United Kingdom United States Venezuela Vietnam Zimbabwe
Copyright
2006 Cisco Systems, Inc. All rights reserved. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.;
Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE,
CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net
Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect,
RateMUX, ScriptShare, SlideCast, SMARTnet, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in
the United States and certain other countries.
All other trademarks mentioned in this document or Website are
property
of Systems,
their respective
The use
of the word partner does not imply a partnership relationship between
the
2006
Cisco
Inc.owners.
All rights
reserved.
Cisco and any other company.
(0601R) notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Important
Printed in the USA

Page 10 of 11

C78-348344-00 05/06

 2006 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 11 of 11