Chem 17 LE 2 2nd Sem

UP Chemical Society in partnership with UP 49ers
brings you
Chemistry Review Series
Chem 17 2ND Long Exam
I. Modified True or False. Write TRUE if the statement
is correct. Otherwise, write FALSE then change the
underlined word(s) to make the statement true.
1. (LAB) The presence of common ion in a solution
decreases the Ksp of the compound.
2. Ions having a noble-gas electron configuration or an
outer shell of 18 electrons are colorless in solution.
3. Upon increasing the temperature, an exothermic reaction
will be displaced, favoring the product formation
4. (LAB) Ag+ can be used to separate Cl- from SO42- by
precipitation.
5. Based from the Le Chateliers Principle and the equation
4HCl(g) + O2(g) 2 H2O(g) + 2Cl2(g) at temperature
753K. The H=-144 kJ. If the volume V is reduced by a
factor of 15, the equation
(nH2O )2 (nCl2 )2
(nHCl )4 (nO2 )
must be increased
by a factor of 15.
6. (LAB) An endothermic reaction will have decreased
solubility.
7. Strong field ligands such as CN- usually produce high spin
complexes and small crystal field splittings.
8. PbI2(s) is less soluble in KNO3 solution than in water
alone.
9. When the number of moles of gas does not change in
upon attaining equilibrium, Kp = (Kc)0 = 1.
10. (LAB) Addition of 3.0 M CH3COOH to the white
precipitate yielded from the addition of 0.1 M BaCl2 to the
test sample indicates the presence of NO3- with
effervescence.
II. Cause and Effect. Identify the effect of the condition
on the indicated parameter. Write increase, decrease, no effect, or
indeterminate.
6. 0.02 M NH3 was used in

NH3-NH4+ buffer system
instead of 0.2 M
Buffer capacity
III. Multiple Choice. Write the letter of your answer.

1. Consider the complex ion [Mn(OH2)6]2+ with 5
unpaired electrons. Which response includes all the
following statements that are true?
I. It is diamagnetic.
II. It is a low spin complex.
III. The metal ion is a d5 ion.
IV. The ligands are weak field ligands.
V. It is octahedral.
a) I, II
b) III, IV, V
c) I, IV
d) II, V
2. Given only the following indicators, with their pKs, in the
laboratory, which would you use to monitor the
neutralization of a substance occurring at pH 5.35?
Indicator
pK
2,4-Dinitrophenol
3.96
Bromophenol blue
4.10
p-Nitrophenol
7.15
Phenolphthalein
9.50
a) 2,4-Dinitrophenol
b) Bromophenol blue
c) p-Nitrophenol
d) Phenolphthalein
3. For the reaction O2(g) 2O(g), what condition favors
the production of oxygen atoms?
a) Low temperature and low pressure
b) High temperature and high pressure
c) Low temperature and high pressure
d) High temperature and low pressure
Condition
Parameter
1. No autozero done
Absorbance
2. 0.2 M FeCl3 and 0.2 M

KSCN was used instead of
0.002
Experimental
molar
absorptivity
3. Cuvette held on clear sides
Absorbance
4. The test samples during

anion separation were diluted
Accuracy
of
anion
identification
5. Using 0.2 M CaCl2 instead

of 0.1 M in the determination
of the solubility of Ca(OH)2
Solubility
Ca(OH)2
4. Which of the following will be the hydrolysis reaction

state of NH4NO3?
of
a) acidic since NH4+ hydrolyzes.

b) basic since NH4NO3 is a base
c) pH neutral since NH4+ and NO3- hydrolyzes
forming acid and base, which neutralizes each
other.
5.
Consider
the
violet-colored
compound,
[Cr(OH2)6]Cl3 and the yellow compound, [Cr(NH3)6]Cl3.
Which of the following statements is false?
a) Both chromium metal ions are paramagnetic

with 3 unpaired electrons.
b) oct for [Cr(NH3)6]3+ is calculated directly
from the energy of yellow light.
c) oct for [Cr(OH2)6]3+ is less than oct for
[Cr(NH3)6]3+.
d) The two complexes absorb their
complementary colors.
6. Arrange the following in increasing order of solubility in
ammonia: CH2CH2Cl, CH2OH, H2O.
a) CH2CH2Cl < CH2OH < H2O
b) CH2OH < CH2CH2Cl < H2O
c) H2O < CH2CH2Cl < CH2OH
d) CH2CH2Cl < H2O < CH2OH
7. Given a chemical equilibrium, which will favor the reverse
reaction?
a) A + 2B AB2 ; [A]
b) 3T + 2U T3U2 ; [T3U2]
c) 28CI 7C4 + 14I2 ; [C4]
d) None of these.
8. Calculate the [S2-] in a 0.1 M H2S solution that is also 0.1
M in HCl. Use the overall acid dissociation constant K12 =
1.1 x 10-21 = K1K2 for H2S
a) 1.1x10-10
b)2.2x10-10
c) 1.1x10-20
d)1.1x10-21
9. Magnetic measurements indicate that [Co(OH2)6]2+ has
3 unpaired electrons. Therefore, the hybridization of the
metal's orbitals in [Co(OH2)6]2+ is:
a) sp3
b) sp2d
c) dsp2
d) sp3d2
10. Calculate the pH of the resulting solution when 0.040
moles HNO3 was added to 0.500 L 0.380 M each of
HC3H5O2 and NaC3H5O2. Ka of HC3H5O2 = 1.30 x 10-5.
a) 4.700
b) 4.886
c) 5.700
d) 5.886
IV. Problem Solving.

1. Five standard solutions of FeSCN2+ were prepared
and their absorbance were determined at its max=465
nm (b= 1 cm). The data for calibration is shown
below:
Soln
Abs
[Fe(SCN)2+]
1
0.063
2x10-5
2
0.134
5x10-5
3
0.286
1x10-4
4
0.576
2x10-4
5
1.183
4x10-4
a. Determine the equation of the calibration curve and
the molar absorptivity of Fe(SCN)2+.
b. Shown below are the components of the unknown
solutions with absorbance determined using a different
blank solution but with the same wavelength.
0.002 M
0.002 M
0.1 M
Abs
FeCl3, mL KSCN, mL HCl, mL
Blank
0
5
5
0
Unk 1
2.5
5
2.5
0.343
Unk 2
3.75
5
1.25
0.459
Unk3
5
5
0
0.593
i. Determine the initial concentration of Fe3+ and
SCN- of each unknown solution.
ii. Determine the equilibrium concentration of Fe3+
and SCN- of each unknown solution.
2.
A 0.10 mol sample of AgNO3 (s) is dissolved in
1.00 L of 1.00 M NH3. How many grams of KI can be
dissolved in this solution without a precipitate of AgI (s)
forming?
3.
A fresh 10 mL 0.02 M acetate buffer with pH =
4.30 is to be prepared for the experiment. The only
solutions available in the laboratory are 0.05 M acetic acid,
0.05 M NaOH and 0.05 M HCl. pKa of HOAc = 4.76.
a) Which two solutions will you use to prepare the
acetate buffer? Determine the amounts of each.
b) What will be the resulting pH when 0.05 mL of
HCl was accidentally dropped to the 10 mL prepared
buffer?
4. Molde and Dorog, both inorganic chemists, study the
reactions of phosphorus halides where they mixed 0.1000
mol of PCl5 with 0.0900 mol of Cl2 and 0.0900 mol of PCl3
in a 0.0500 L flask at 250C (Kc = 4.2 x 10-2).
a. Write the balanced chemical equation.
b. In which direction will the reaction proceed?
c. If [PCl5] = 0.2050 M at equilibrium, what are the
equilibrium concentrations of the other components?
5. What will be the mass of Phosphoric acid that you will
use to make a 500 mL solution having a phosphate
concentration of 4.24x10-24? pH of solution is 2.2
pKa1=2.16. pKa2=7.21. pKa3=12.32. MW of phosphoric
acid is 97.995 g/mol
Answer Key:
I. True or False
1. False - has no effect
6. False - increase
2. True
7. False low,high
3. False - reactant formation 8. False - soluble
4. False - Ca2+
9. False Kp = Kc
5. True
10. False - CO32II. Cause and Effect
1. increase 4. No effect
2. decrease 5. Decrease
3. increase 6. Decrease
III. Multiple Choice
1. B
6. A
2. B
7. C
3. D
8. C
4. A
9. D
5. B
10. A
IV. Problem Solving
1.
(a) y = 2965.35x-8.2642x10-3
= 2965.35
(b) i. [Fe3+] = (MFe3+)(VFe3+)/Vtot
[Fe3+]1 = (0.002M)(2.5mL)/10mL = 5x10-4M
[Fe3+]2 = (0.002M)(3.75mL)/10mL = 7.5x10-4M
[Fe3+]3 = (0.002M)(5mL)/10mL = 1x10-3M
[SCN-] = (MSCN-)(VSCN-)/Vtot
[SCN-]1 = (0.002M)(5mL)/10mL = 1x10-3M
[SCN-]2 = (0.002M)(5mL)/10mL = 1x10-3M
[SCN-]3 = (0.002M)(5mL)/10mL = 1x10-3M
ii. c = A/ b = [Fe(SCN)2+]
C1 = 0.343/2965.35 = 1.157x10-4
C2 = 0.459/2965.35 = 1.548x10-4
C3 = 0.593/2965.35 = 2.000x10-4
Keq = [Fe(SCN)2+]/[Fe3+][SCN-] = x/ ([Fe3+]-x)([SCN-]x)
Keq1 = 1.157x10-4/(5x10-4M -1.157x10-4)( 1x10-3M 1.157x10-4) = 338.4
Keq2= 1.548x10-4/( 7.5x10-4M -1.548x10-4)( 1x10-3M 1.548x10-4) = 293.5
Keq3= 2.000x10-4/(1x10-3M -2.000x10-4)( 1x10-3M 2.000x10-4) = 312.5
2. + () + 23 () [(3 )2 ]+ ()
In soln:
0.10 M
1.00 M
0M
Complex: -0.10 M
-0.20 M
+0.10 M
0M
0.80 M
0.10 M
Changes:
+x M
Equilibrium: x M
= 1.6 107 =
=
0.10
1.6107 (0.80)2
+2x M
0.80 +2x M
-x M
0.10 -x M
[(3 )2 ]+
0.10
= (0.80+2)2
[+ ][3 ]2
9
= 9.8 10
0.10
(0.80)2
= [+ ][ ] = 8.5 1017 = (9.8 109 )[ ]

[ ] =
8.51017
9.8109
= 8.7 109
8.7109
166.0
1.00
1 1 =
1
.
3. a) 1.0 mL NaOH and 4.0 mL HOAc
Step 1: Calculate the ratio A-/HA.
pH = pKa + log [A-]/[HA]
4.30 = 4.76 + log [A-]/[HA]
0.34673685 = [A-][HA]
This means that for every 1 mol of HA, there is
0.34673685 mol of A-.
Step 2: Calculate the molarity, and later the amount in
moles, of each component in the buffer.
MA- = [0.34673685/(1.00 + 0.34673685)]*0.02
MA- = 5.15 x 10-3 M
molA- = (MA-)*0.01 L = 5.15 x 10-5 moles
MHA = [1.00/(1.00 + 0.34673685)]*0.02
MHA = 1.49 x 10-2 M
molHA = (MA-)*0.01 L = 1.49 x 10-4 moles
Step 3: Calculate the total moles of weak acid component.
moltotalHA = 5.15 x 10-5 + 1.49 x 10-4
moltotalHA = 2.00 x 10-4
Step 4: Calculate the volume of each stock solution.
VNaOH = (5.15 x 10-5 mol)/0.05 M = 1.0 mL
VHOAc = (2.00 x 10-4 mol)/0.05 M = 4.0 mL
b) pH = 5.25
Step 1: Calculate the amount of acid added in moles.
molHCl = (0.05 x 10-3 L)(0.05 M) = 2.5 x 10-6
Step 2: Use Henderson-Hasselbalch equation.
pH = pKa + log [A-]/[HA]
pH = 4.76 + log [5.15 x 10-5 - 2.5 x 10-6]
/ [1.49 x 10-4 + 2.5 x 10-6]
pH = 5.25
4. a. PCl5(g) PCl3(g) + Cl2(g)
b. To the right (Kc > Qc)
c. Using ICE table,
[PCl5] = 2.000 x = 0.2050; x = 1.795

[PCl3] = [Cl2] = 1.800 + x = 3.59
5.
H3PO4 H2O
I
?
C
-x
E
?-x
H3O+
0
+x
HPO40
+x
since pH=2.2, the value of H3O+ = 6.309573445x10-3 .

Use this as the value of H3O+ and HPO4- since they are
stoichometrically equal. From pKa1, we can get the Ka1
which is 6.9x10-3. Use the equation
xx
(6.31 103 )2
Ka1 =
=
? x ? (6.31 103 )
to get the value of ?=0.0120792425 M. Use the MW of
phosphoric acid to get the mass of phosphoric acid to be
use which is 0.5918531744 g or 0.592 g.

Chem 17 LE 2 2nd Sem

Uploaded by

Copyright:

Available Formats

Chem 17 LE 2 2nd Sem

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chem 17 LE 2 2nd Sem

Uploaded by

Copyright:

Available Formats

UP Chemical Society in partnership with UP 49ers

6. 0.02 M NH3 was used in

III. Multiple Choice. Write the letter of your answer.

2. 0.2 M FeCl3 and 0.2 M

3. Cuvette held on clear sides

4. The test samples during

5. Using 0.2 M CaCl2 instead

4. Which of the following will be the hydrolysis reaction

a) acidic since NH4+ hydrolyzes.

a) Both chromium metal ions are paramagnetic

IV. Problem Solving.

= [+ ][ ] = 8.5 1017 = (9.8 109 )[ ]

[PCl5] = 2.000 x = 0.2050; x = 1.795

since pH=2.2, the value of H3O+ = 6.309573445x10-3 .

You might also like