USER MANUAL

Summary
- System components

Dock, Sensors and Board ...........................................................................................................................................................

Remote and Straps ...................................................................................................................................................................... 3

- System Setup

Connecting the tablet ..................................................................................................................................................................

- Using the system

Desktop .......................................................................................................................................................................................... 5

External video ............................................................................................................................................................................... 6

CoRehab Platform ........................................................................................................................................................................ 7

Back Office ..................................................................................................................................................................................... 9

- Troubleshooting

.......................................................................................................................................................................... 11

- Product Specification

............................................................................................................................................................... 15

- Labeling and Regulation

............................................................................................................................................................... 16

- Health and safety information

.................................................................................................................................................... 17

System components

9
1
5

The tablet is specifically adapted to run the CoRehab Platform software and the
Back Office. On the back of the tablet there is a support stand you can open. Be
sure to read the following before connecting anything to the tablet.
1
2
3

4
5
6

Power button: used to turn on and off the system

Bluetooth dongle: necessary for the sensor connection
Remote dongle: necessary for the remote

7
8
9

USB HUB: connect to the USB port next to the power button
AC cable: connect to the lateral part of the tablet to recharge it
Display button: used to switch from internal to external display
Volume buttons: used to change the volume from the tablet
AC adapter: connect it into AC outlet to recharge the tablet
HDMI cable: optionally use HDMI to connect to an external display

Sensors

on / off

Inertial sensors uses bluetooth technology to communicate with the system.

To turn them on press the black button just above the numbers of the
sensors
To reset the sensor, follow the reset instructions showed on pag. 18.
To recharge the sensors place them on the dock and be sure to place the
golden contact in the right direction. In the upper part of the dock there is a
AC connector used it to connect the labeled cable Sensors

Riablo Board uses bluetooth technology to communicate with the system.

The board uses a magnetic oscillanting part that transforms it into a
proprioceptive balance board.
1

AC connection, used to charge the board;

Power button, used to turn on and off the board;

Led status, shows if the board is operative or needs to be charged

System components

Dock, Sensors & Board

Remote & Straps

x2

EN

x2
M

x2
x2

The straps are used to secure the sensors on the body of the user.
Place the strap on the body part and use the velcro to close the strap.
CoRehab Platform comes with 8 straps: 1 green for chest, 1 green for
waist, 2 orange for thigh, 2 yellow for calf or arms, and 2 for wrists.

To use the remote with the tablet, be sure the infrared dongle is
connected. For the best use of the remote, follow these guidelines:
Avoid blocking the signal between the remote and the dongle.
The optimal distance is not more than 3 meters.
Avoid bright light sources behind, or near the display or remote.
Avoid highly reflective surfaces near the infrared dongle or the
structure.

System setup

Connecting the tablet

DONGLE BLUETOOTH
HUB USB

+
+

USB IR

1. Insert the bluetooth dongle and the IR

receiver into the hub usb.

2. Connect the DC plug on the tablets AC

adapter cord into the DC input connector on
the lateral part of the tablet.

3
3. OPTIONAL: You can use the tablet with
an external AV output, using the mini HDMI
cable to connect to a personal bigger display.

CAUTION: to prevent electric shock, match the wide blade of the plug to the wide slot and insert fully into outlet

Using the System

Destkop
3

Before switching on the tablet using the power button on the superior part,
use the usb port to connect the USB HUB.
After you switch on the tablet using the power button, you will see the main
screen. Ensure that the sensor and footboard are charged and you are ready
to use the software.

1
2
3

BackOffice, to create users, programs, and check the results.

Platform, to start your training session.
Shutdown button to switch off the system.

Using the system

External Video

With the CoRehab Platform you have a powerful and ergonomic system
that can follow you around the center and at home, but if you want,
you can also use it connected to an external monitor or TV using the
miniHDMI cable.
To use it, connect the miniHDMI on the lateral port of the tablet using
the miniHDMI cable while the tablet and external display is already

turned on. You will see the images on the external display.
Alternativelly you can mirror the display: connect the miniHDMI on
the lateral port of the tablet using the HDMI cable when the tablet is
turned off. Now turn on the external display and the tablet. Now you
have mirror display on tablet and on external display.

CoRehab Platform
(from v2.1)

When you start the Platform you will see the image above where you
have to insert your personal code (given by physioteraphist optionally by
the bracelets) to proceed

After the login you will find the products you bought active and selectable
and the favorites bar where there are functions chosen as favourites.
To add a function to this bar you have to press the (i) button. (the button
right corner indicates when this is possible)

Using the system

During the calibration you will face a screen divided in 3 steps:
the first step is for preparation, wear the straps, turn on and insert
the selected inertial sensors, if you need the RiabloTM Board turn it on
and stay on the board until you see the next screen light up
the second step is for sensor calibration, place yourself in the
calibration position and press OK mantaining the neutral position
if the red message appears on the screen, follow the instructions

In the exercise screen you will see the movement you will perform
during the game. On the right of the screen you will see the instructions
of the exercises and information about # of reps, # of series, lenght of
program, and graphical representation (in %) of current daily program
progression.
When all is clear and you are ready to start press OK to proceed.

BackOffice - Users view

BackOffice - Add exercises

After turning on the structure version, connect to the Wifi-network and

surf on the page http://webapp.riablo.net.
In the Back Office, as a physiotherapist you can create patients, protocols
and add exercises (see the next page).To use the Platform, give your
patient a 3-digit code that you can find on the patients page or you can
give him the optional bracelet to remember this code.

To create a new patient click on Add Patient (the bottom left icon) and on
the next page insert the patient data. After the creation you can click on the
patient, then click on the chosen day to add an exercise to the program.
Now you can scroll down until you find a movement and then you can drag
the type of exercise you want for selected movement to the right panel. To
reorder the selected exercises drag them up or down in the list on the right.

BackOffice - Tests results

Using the system

BackOffice - Riablo Results

After an exercise session of Riablo, you can look at the results in the
Back Office.
The Riablosity indicates your overall score of the exercise.
The Precision is high if the user was near the perfect angle to reach.
The Stability indicates how stable the body was during the exercise.
The Accuracy is low if the user compensates too much.
Each result can be printed to be attached to the medical file of the user.

After the user performed a test with Check in Motion or with Back in Action
you can find the results in details in BackOffice. There youll find the score
for each test and with details of angles reached during the exercises.
Each result can be printed to be attached to the medical file of the user.

10

Troubleshooting
Before requesting service
Go through this section if you experience difficulty in operating the
system. Should any problem persist, contact the appropriate customer
service helpline:

turn off the system. Then with only the system and the TV connected,
touch the systems power button to turn the system back on. The video
output setting will automatically be reset to the standard resolution. If
the resolution of the video content is not supported by the TV in use, the
screen may go black. If this happens, try to change TV used for output.

tel: 0039 0461 960157

mail: [email protected]
fax: 0461 955700

The size of the video image and the TV screen do not match.
Check that the systems video output settngs are correct.
Check that the settings of the connected TV are correct. For details, refer
to the instrictions supplied with your TV.
With some video content, the screen size cannot be changed.

Power
The system does not turn on.
Check that the AC power cord is securely inserted in the system
and the electrical outlet.

Sound

Picture

There is no sound.
Check that the muting function on the TV speakers is turned on.
Also check that the volume is at the appropriate level.
The sound doesnt begin until the game begins.
If an audio device is connected, check the settings of the device.
For details refer to the instructions supplied with the audio device.
There may be a problem with the miniHDMI cable. Try using another
cable that is compatible with the system.
Some contents that support Dolby Digital, DTS, and other formats
may not produce audio from all channels.

There is no picture on the TV screen.

Make sure you have completed all steps, in the order that they appear,
on the System Setup sheet included with your system.
Make sure that all components of your setup are plugged into power
outlets.
Make sure that cable connections are correctly installed and that all
plugs are securely plugged into the appropriate connectors.
Check that the input mode on the TV is appropriate for the connector in
use on the system.
There may be a problem with the miniHDMI cable in use. Try using
another cable with the system, sometimes mini HDMI cables are
incompatible with the device
If the video output settings on the system do not match those of the
cable or TV in use, there may be no picture. If the screen goes blank,

Network
A connection to the network cannot be established.
Check that the WiFi is enabled on your computer.
Try to update the network scan if you are sure the system is turned on.

11

The remote controller

Make sure no objects are blocking the signals between the system,
and the remote.
Make sure batteries are not depleted.

Sensors and/or Board

The following conditions can interfere with the operation of the remote:
1. Using the remote too close or too far from the system. The optimal
distance is between 1 and 4 meters.
2. Bright light sources (including sunlight) behind or near the TV,
shining towards the remote or reflecting off the TV screen.
3. Highly reflective surfaces near the dongles.
4. Sources of infrared light in the gameplay area such as electric,
propane or kerosene heaters, flames from fireplaces, candles,
stoves or other sources of heat.
5. Radio frequency interference may cause the Remote to work
erratically. Check for and turn off wireless devices such as cordless
phones, wireless computer keyboards mice or other similar
devices.

The sensors and/or the board does not respond.

If the sensors does not respond try to turn them off pushing and
holding the small black button on the front part of the sensor or the
red button on the front part of the board until the led turns off. Then
turn them on again.
If turning off the sensors does not help try to restart the system.
To reset the turned off sensors, press and hold the power button
untill the led clashes red, then press and hold to turn on.
The sensors and/or the board does not match the users movements.
If the sensors does not match the users movements it may be
caused by straps moving during the exercises. Reposition the band
and recalibrate using the M button.
If the previous tip does not help use the re-calibrating function on
the in-game menu.

If you think any of these conditions are affecting the operation of the
remote, try removing or reducing the source of interference.

The following conditions can interfere with the operation of the sensors:
1. Using the sensors in an surround full of WiFi connections.
2. Using the sensors too far from the system. The optimal distance is
between 1 and 4 meters.

12

Troubleshooting

Remote controller

The Back Office does not display properly.

Try to turn off and turn on again the system.

Other issues

Supported accessories
Printers
HP Deskjet series

The system makes noise.

When using the system in a location where heat can build up, such as
an enclosed room, the fan will rotate rapidly to reduce the systems
temperature and this may generate increased noise. Move the system to
a location with good ventilaton.

Televisions
Samsung with FULL-HD compatibility

You forgot the patient login code.

You can check evertime in the Back Office the code of every patient you
have registered.
The system is warm.
When the system is being used or is turned on, it may become warm. This
is not a malfunction.
The screen is frozen. The system does not operate.
Restart the system. Touching the power button on the system rear will
force the system to shut down. After shutdown, turn on the system again.
The power indicator on the system rear is not red.
Check that the AC power cord is securely inserted in the system and the
electrical outlet.

13

 CoRehab guarantees that materials employed are of good quality, that

there are no defects and that the products are suitable to carry out
their own function. Moreover, they ensure that the products and single
components have been built in compliance with the laws in force at the
time of the agreement. However, CoRehab does not guarantee for special
qualities of products that differ from those described in the informative
brochures and on the website www.corehab.it
All Products are guaranteed for thirty-six (36) months. The guarantee will
be valid starting from the date of the installation and the training course.
The warranty includes the restoration and/or replacement of every device
showing quality defects related to its manufacturing. Warranty DOES NOT
covers the following:
damages due to negligence, use against the instructions, tampering
and alteration, damage due to accidental causes and carelessness.
normal wear to components like connecting cables and transformer,
elastic straps, boards that are not showing manufacturing defects.
For every device sent back that is not showing quality related defects,
CoRehab is going to invoice shipment costs, restoration/replacement
costs and a re-testing fee of 100,00 + VAT.
The services concerned by the warranty obligation taken on are expressly
subject to the compliance with the payment terms. Based on such breach,
CoRehab could rightfully justify their denial to provide a warranty.
CoRehab will not assume any liability towards the final Client or the
Patient using the Products, with reference to damages that may result
from a wrong medical prescription and/or improper use of the Products.

14

Warranty

WARRANTY

Product Specification
Dimensions

Measurements
Sensor: Pitch, Roll, Yaw [degrees]
Board: Roll, Pressure
W

Communication
Communication: Wireless Bluetooth 2.1
Adapter: Bluetooth 2.1 USB dongle

Power supply
Autonomy of battery: up to 3[hours] in streaming.
Recharge time: up to 3[hours] if sensor is completely discharged
Recharge method:
Sensors - Connecting the dock to AC using supplied USB cable.
Board - Connecting the Board to AC using supplied USB cable.
Tablet - Connecting the tablet to AC using the AC adapter.
Battery type: Board: 3.7[V] 1050[mAh] Lion.
Sensor: 3.7[V] 200[mAh] LiPo.
Voltage input: 5[V] DC
Rated current input: Board: 800[mA]. Sensor: 800[mA]
Updates method: Connecting the system to the internet.

Tablet:
Height 19,6 cm
Width 29,6 cm

Sensors
W

W
H

Environmental condition

Sensor:
Height 55 mm
Width 43 mm

Usage temperature: +150C to +300C

Storage temperature: -300C to +700C
Relative humidity: 10% 95%7
Atmospheric pressure: 500[hPa] 1060[hPa]

Board:
Height 2,7 cm
Width 58,4 cm
Depth 36,4 cm

Functionality
Body attachment method: Velcro straps

15

On AC cables

Regulation

On the AC cables there are labels that indicates the purpose of each cable.

The system has been tested according to the standard ISO 9001 (2008) design
and manufacturing of electro-medical equipment for physiotherapy.
Registered by Board of Health as a class I-M medical device non-sterile and
without measurement functions.

Sensors
The Sensors labeled cable is used to connect the Dock to the tablet, AC
adapter or at the structure.

Tablet
The Tablet labeled cable is used to connect the Tablet to the AC adapter.

Board
The Board labeled cable is used to connect the Riablo Board, to the AC adapter.

On sensors

CPxxx.IS<i>

Copyright

On the sensors there are labels that indicates their product association and
product model.

Information and views expressed in this document, including URL and other
Internet website references, may change without notice. This document
does not provide you with any legal rights to any intellectual property in any
CoRehab product. You may copy and use this document for your internal,
reference purposes.
2015 CoRehab s.r.l.. All rights reserved. CoRehab and Riablo, are trademarks
of CoRehab.
This product incorporates copyright protection technology and intellectual
property rights. Reverse engineering or disassembly is prohibited.

CRxxx.BB
Behind the board there is a label that indicates the product association and
product model.

Device P/N
Corehab s.r.l.
Via Klagenfurt 62, 38121, Trento (TN), Italy
Phone
+39 0461 960157
Mail
[email protected]
VAT
02185760226

REF. CP0200

CoRehab Platform
MEDICAL DEVICE
CLASS I

The names of actual companies and products mentioned herein may be the
trademarks of their respective owners.
Europe and/or international patents pending.

lotto: 000000

16

Specification & Labeling

Labeling and Regulation

Health and Safety Information

IMPORTANT SAFETY INFORMATION - READ THE FOLLOWING WARNINGS BEFORE SETUP OR USE OF THE COREHAB PRODUCTS. IF THIS PRODUCT WILL
BE USED BY YOUNG CHILDREN, THIS MANUAL SHOULD BE READ AND EXPLAINED TO THEM BY AN ADULT. FAILING TO DO SO MAY CAUSE INJURY.

WARNING
Motion Injuries and Eyestrain

WARNING - Seizures
Some people (about 1 in 4000) may have seizures or blackouts triggered by
light flashes or patterns, and this may occur while they are watching tv or
playing video games, even if they have never had seizure before.

Playing with the system can make your muscles, joints, skin or eyes hurt.
Follow these instructions to avoid problems such as tendinitis, carpal tunnel
syndrome, skin irritation or eyestrain:
Avoid excessive play. Follow the physio programs. Take your time, if you
feel tired take a break.
If your hands, wrists, arms or eyes become tired or sore during exercises,
or if you feel symptoms such as tingling, numbness, burning or stiffness,
stop and rest for several hours before exercising again.
If you continue to have any of the above symptoms or other discomfort
during or after play, stop playing and see a doctor.

Anyone who has had a seizure, loss of awareness, or other symptom linked
to an epileptic condition should consult a doctor before playing a video game.
Parents should watch their children play video games. Stop playing and
consult a doctor if you or your child has any of the following sympoms:
Convulsions - Eye or muscle twitching - Loss of awareness - Altered vision Involuntary movements - Disorientation - Muscle pain - Joint pain

WARNING
Active Medical Device

To reduce the likelihood of a seizure when playing with the system:

Sit or stand as far from the screen as possible.
Play with the system (Tablet) on the smallest available television screen.
Do not play if you are tired or need sleep.
Play in a well-lit room.
Follow the physio programs and do not extend the time of exercise.

Riablo is a Class II-B active medical device.

Caution: Do not attempt to disassemble the Riablo station, sensors, Dock and
Board. Refer servicing to qualified personnel only.
NOTE: This product does not contain latex.
This product complies with applicable laws barring the use of toxic materials
such as lead, mercury, cadmium, hexavalent chromium, PBB or PBDE in
consumer products.

17

Health and Safety Information

WARNING - Electric Shock

WARNING - Play Space

To avoid electric shock when you use this system:

Do not use CoRehab during a lightning storm. There may be a risk of
electric shock from lightning.
Use only the AC adapter that comes with your system.
Do not use the AC adapter if it has damaged, split or broken cords or wires.
Make sure that the AC Adapter cord is fully inserted into the wall outlet or
extension cord.
Always carefully disconnect all plugs by pulling on the plug and not on the
cord. Make sure the Riablo power button is turned OFF before removing
the AC Adapter cord from an outlet.

Gameplay with your Riablo system may require varying amounts of

movement. To reduce the risk of injury or property damage, take the following
precautions before exercising:
Make sure you have enough space to move freely.
Look in all directions (right, left, forward, backward, down, and up). Make
sure there is nothing you might trip on.
Make sure your exercise space is far enough away from windows, walls,
stairs, etc.
Be aware of children and pets in the area. If necessary, move object or
people out of the exercise space.
While playing:
Stay far enough away from your TV to avoid contact.
Keep enough distance from other players, bystanders, and pets. This
distance may vary between exercises, so take account of how you are
exercising when determining how far away you need to be.
Stay alert for object or people you might hit or trip over. People and
object can move into the aera during exercise, so always be alert to your
surroundings.
Make sure you always have good footing while exercising:
Play on a level floor with enough traction for game activities.
Make sure to use proper footwear for exercise or are barefoot, if
appropriate. Do not wear high-heels, flip-flops, etc.

WARNING - Radio waves

Radio waves may affect electronic equipment or medical devices (for example
pacemakers), which may cause malfunctions and possible injuries.
If you use a pacemaker or other medical device, consult your physician
or the manufacturer of your medical device before using the system
wireless networking feature (bluetooth and wireless LAN)
Do not use the wireless networking feature in the following locations:
Areas where wireless network use is prohibited.
Areas near fire alarms, automatic doors and other types of
automated equipment

18

RC1100 - Manual rev 04 - 04.08.2016

graphic project and design

CoRehab srl

Via Klagenfurt 62
38121 Trento
ITALY
0039 0461 960157
[email protected]
p.iva 02185760226
COREHAB.COM