Her 1603
Her 1603
Her 1603
PO WE R SEM IC O ND UC TO R S
HER1601G – HER1608G
16A HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER
Features
! Glass Passivated Die Construction B
! Ultra-Fast Switching TO-220A
! High Current Capability C Dim Min Max
! Low Reverse Leakage Current A 14.9 15.1
! High Surge Current Capability G A B — 10.5
! Plastic Material has UL Flammability C 2.62 2.87
Classification 94V-O PIN1 2 D 3.56 4.06
D E 13.46 14.22
F 0.68 0.94
G 3.74 Ø 3.91 Ø
Mechanical Data F E
H 5.84 6.86
! Case: Molded Plastic I 4.44 4.70
! Terminals: Plated Leads Solderable per P J 2.54 2.79
MIL-STD-202, Method 208 K 0.35 0.64
! Polarity: See Diagram I L 1.14 1.40
! Weight: 2.24 grams (approx.) L P 4.95 5.20
! Mounting Position: Any H All Dimensions in mm
! Marking: Type Number
PIN 1 + +
J PIN 2 - Case
RMS Reverse Voltage VR(RMS) 35 70 140 210 280 420 560 700 V
16 1601G - 1604G
1605G
10
12
8 1606G - 1608G
1.0
4
Pulse width = 300µs
2% duty cycle
0.1
0
0 50 100 150 0.2 0.6 1.0 1.4
TC, CASE TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Forward Current Derating Curve Fig. 2 Typical Forward Characteristics
450 400
8.3 ms single half-sine-wave Tj = 25°C
IFSM, PEAK FORWARD SURGE CURRENT (A)
375
Cj, CAPACITANCE (pF)
HER1601G -
HER1605G
300
100
225 HER1606G -
HER1608G
150
75
0 10
1 10 100 0.1 1.0 10 100
NUMBER OF CYCLES AT 60Hz VR, REVERSE VOLTAGE (V)
Fig. 3 Maximum Non-Repetitive Surge Current Fig. 4 Typical Junction Capacitance
trr
+0.5A
50Ω NI (Non-inductive) 10Ω NI
Device
Under (-)
Test 0A
(+)
50V DC Pulse
Approx Generator -0.25A
(-) (Note 2)
1.0Ω (+)
Oscilloscope
NI (Note 1)
Notes: -1.0A
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω. Set time base for 5/10ns/cm
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.