Pipe Catalogue

Feature
Applications
Pipes and Fittings
KEY cast iron socketless pipes and fittings are used in

above ground gravity drainage system for waste, soil and
rainwater. It is also applicable for ventilation purpose and
drainage of aggressive effluents and below ground
network.
KEY high strength cast iron pipes and fittings provide

excellent resistance to impact and do not deform.
KEY exceptional resistance to corrosion is provided by
internal epoxy coating on pipes and fittings further
enhancing the proven durability of cast iron. The smooth
internal surface ensures long term, high efficient flow
characteristics.
KEY pipes and fittings, when tested separately, can
withstand a maximum static accidental water pressure of 5
bars.
Couplings
KEYs Hubless couplings conform to all the mechanical
requirement of BS 6087. These couplings are composed
of SUS 304 or SUS 316 stainless steel shield, clamp
assembly and an elastomeric sealing sleeve conforming to
the requirement of BS EN 681-1 and also can resist the
normal domestic effluents with thermal effects up to 70C
temperature. This elastomeric material was made by well
balanced formula with the combination of outstanding
properties in resisting abrasion, oil, grease, chemicals,
ultraviolet, heat and cold conditions. This elastomeric
sleeve also provides a cushioning element in the coupling
to avoid shock, vibration and ensure a noiseless drainage
system.
The stainless steel was selected for the clamp and shield
assemblies because it possesses high corrosion
resistance characteristics.
Electrical Continuity
Couplings are incorporated with this feature to provide
safety and suit different designs
Design Consideration
Small angular deflection can be accommodated by
couplings with a maximum 3 and 0.5 bar water pressure.
However, pipelines should be designed and installed with
proper alignment and sufficient supports. For deflection
angle other than the listed fittings, a combination of two or
more is recommended.
For horizontal pipeline, maximum span between hangers
is 2m while maximum distance apart from coupling and
hanger is 750mm. The distance should reduce to 500mm
for fittings in order to provide necessary support to the
system and minimize the overstress condition. The
couplings would be damaged by improper design or/and
installation; hence, the operation of the pipeline and the
system are also affected
Pressure test is recommended for pipelines to be built-in
or installed in locations where access with difficulty before
completion.
Standards
The pipes and fittings conform to the Standard: BS EN
877:1999.
Lengths of Pipes
KEY pipes are manufactured in the length of 3m (other
lengths may offer subjected to customers order). Standard
supply of our pipes is shown below and details of various
fittings is found on the following pages.
Nominal Sizes, Dimensions & Mass

Nominal
External
Tolerance on
Mass per
Diameter Diameter External Diameter
Length
40
48
+2 to -1
12.0
50
58
+2 to -1
13.0
75
83
+2 to -1
19.0
100
110
+2 to -1
25.5
125*
135
+2 to -2
35.4
150
160
+2 to -2
42.2
200
210
+2.5 to -2.5
69.5
250
274
+2.5 to -2.5
99.8
300
326
+2.5 to -2.5
133
400
429
+2 to -3
190
500*
532
+2 to -3.5
-600*
635
+2 to -4
-(*) Special Size subjected to customers order.
Dimensions in mm and applicable to ALL pipes and
fittings.
Wall Thickness
Nominal Diameter
Nominal Thickness
Minimum
Thickness
2.5
3.0
3.0
3.0
3.5
3.5
4.0
4.5
5.0
5.0
5.2
5.8
40*
3.0
50
3.5
75
3.5
100
3.5
125*
4.0
150
4.0
200
5.0
250
5.5
300
6.0
400*
6.3
500*
7.0
600*
7.7
(*) Special Size subjected to customers order.
Dimensions in mm and applicable to ALL pipes and
fittings.
Coating on Pipes and Fittings

All pipes and fittings are protected by Tar Free Epoxy
internally and externally with minimum thickness 80
microns. Anti-corrosive red primer external coatings or
other protections are also available.
Bends
22.5 Bend
DN (mm)
50
75
100
150
200
250
300
a (mm)
65
58
60
70
100
120
140
Mass (kg)
0.50
0.90
1.25
2.35
5.60
9.50
12.0
a (mm)
50
70
75
95
113
145
155
Mass (kg)
0.57
1.00
1.65
3.60
5.90
10.2
14.0
a (mm)
75
75
95
110
145
175
220
260
Mass (kg)
0.60
0.79
1.32
2.40
4.30
7.60
16.5
22.0
45 Bend
DN (mm)
50
75
100
150
200
250
300
88 Bend
DN (mm)
40
50
75
100
150
200
250
300
88 Bend with Hell Opening

DN (mm) dn (mm)
100
50
a (mm) c (mm) Mass (kg)

140
225
3.14
Branches
45 Single Branch
DN (mm) a (mm)
50
125
75
155
100
185
150
270
200
342
250
425
300
496
L (mm)
171
215
255
350
458
556
650
Mass (kg)
1.12
2.40
3.65
9.00
14.7
21.0
27.5
Remark: 15% lower derivation on mass and 2 degree in angle for fittings are allowed
Branches
88 Single Branch
DN (mm) a (mm)
50
67
75
94
100
113
150
151
200
180
250
225
300
275
b (mm)
80
94
113
151
180
225
265
L (mm)
147
180
220
300
360
450
530
Mass (kg)
1.12
1.95
3.10
7.40
10.8
19.7
26.1
45 Single Reducing Branch

DN (mm) dn (mm) a (mm) b (mm)
75
50
133
132
100
50
155
155
100
75
170
170
150
75
227
240
150
100
225
230
200
100
260
260
200
150
302
302
250
150
340
340
300
150
385
383
L (mm)
178
183
220
278
278
303
380
386
435
Mass (kg)
1.65
2.75
3.10
5.43
6.90
8.50
12.3
15.5
29.7
L (mm)
138
160
170
194
221
225
298
302
335
352
Mass (kg)
1.46
1.46
2.15
2.60
4.60
5.44
8.00
8.85
14.0
19.0
L (mm)
360
Mass (kg)
12.1
L (mm)
220
265
334
339
Mass (kg)
3.85
5.70
18.0
19.0
88 Single Reducing Branch

75
40
91
83
75
50
75
92
100
50
77
105
100
75
93
110
150
75
105
140
150
100
125
158
200
100
129
180
200
150
156
183
250
150
161
228
300
150
173
267
45 Double Branch
150
150
280
280
88 Double Reducing Branch

100
100
110
120
150
100
132
140
250
100
157
212
250
150
160
227
Special Fittings
Vent Bend
DN (mm) dn (mm) a (mm) h (mm) Mass (kg)
100
50
110
40
2.50
Anti-siphon P-trap
DN (mm) a (mm) Mass (kg)
50
255
5.20
75
350
11.0
100
470
19.8
150
525
34.2
45 Bend with Access Door

DN (mm)
75
100
150
200
250
a (mm)
83
75
90
118
145
Mass (kg)
1.50
2.10
4.45
7.90
11.5
88 Bend with Access Door

DN (mm)
75
100
150
200
250
a (mm)
95
110
145
175
258
Mass (kg)
1.80
2.85
5.90
9.60
16.8
45 Inspection Branch
75
75
170
170
100
75
198
195
100
100
190
190
150
100
235
228
150
150
265
265
L (mm)
235
258
258
280
340
Mass (kg)
4.00
4.53
5.20
8.17
10.3
L (mm)
180
220
257
302
330
Mass (kg)
2.30
3.80
6.53
8.10
9.97
88 Inspection Branch
75
75
90
95
100
100
115
115
150
100
128
158
150
150
147
155
200
150
163
183
Special Fittings
Long Radius Bend
DN (mm) a (mm)
75
285
100
340
150
400
R (mm)
250
300
350
DN (mm) L (mm)
50
40
75
45
100
50
150
60
200
70
250
80
300
90
Mass (kg)
0.30
0.55
0.92
1.75
2.80
3.80
4.50
Mass (kg)
17.0
25.0
30.0
Plug
Reducer (Concentric)
DN (mm)
75
100
100
150
150
200
200
250
250
300
300
300
dn (mm)
50
50
75
75
100
100
150
150
200
150
200
250
L (mm)
90
100
92
105
108
120
125
138
145
156
166
176
Mass (kg)
0.68
1.10
0.94
1.75
1.70
3.10
2.93
5.40
5.40
7.30
7.60
7.50
L (mm)
90
100
92
105
108
120
125
138
145
156
166
176
Mass (kg)
0.68
1.10
0.94
1.75
1.70
3.10
2.93
5.40
5.40
7.30
7.60
7.50
Reducer (Eccentric)
DN (mm)
75
100
100
150
150
200
200
250
250
300
300
300
dn (mm)
50
50
75
75
100
100
150
150
200
150
200
250
Inspection Short Pipe

DN (mm) L (mm)
50
250
75
250
100
300
150
300
200
300
250
300
300
300
Mass (kg)
1.60
2.50
4.50
6.70
8.00
8.45
15.00
Coupling
Single Screw Type (for up to DN 200)
DN (mm)
40
50x40
50
75
100
150
200
Width of
Coupling L
(mm)
41
41
41
46
46
54
66
Length of Clearance
for End to End T
(mm)
3
3
3
3
4
4
4
Multi screw type (for DN 250 and DN 300)

DN (mm)
250
300
Width of
Coupling L
(mm)
140
140
Length of Clearance
Number of
for End to End T
Bolts
(mm)
4
8
4
8
Special Coupling
Multi Screw Type (for all size) is also available as per the design requirement of the customer in order.
Multi screw type (two bolts)
Multi screw type (four bolts)
All couplings are made from Stainless Steel Grade 316 Casing with Grade 304 Fixing Bolt, EPDM
Gasket & Build-In Electrical Continuity Clip.
Remark :
The following stainless steel grade for couplings are also available upon request :
1. Stainless Steel Grade 304 Casing with Grade 304 Fixing Bolt.
2. Stainless Steel Grade 316 Casing with Grade 316 Fixing Bolt.

Pipe Catalogue

Uploaded by

Copyright:

Available Formats

Pipe Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Catalogue

Uploaded by

Copyright:

Available Formats

Feature

Pipes and Fittings

KEY cast iron socketless pipes and fittings are used in

KEY high strength cast iron pipes and fittings provide

Nominal Sizes, Dimensions & Mass

Coating on Pipes and Fittings

88 Bend with Hell Opening

a (mm) c (mm) Mass (kg)

45 Single Reducing Branch

88 Single Reducing Branch

88 Double Reducing Branch

45 Bend with Access Door

88 Bend with Access Door

Inspection Short Pipe

Multi screw type (for DN 250 and DN 300)

Multi screw type (two bolts)

Multi screw type (four bolts)

You might also like