Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Denison Double Pump T6CCZ Eng

    Uploaded by

    Eustahije Brzic
    This document provides specifications for the Denison Hydraulics vane double pump series T6CCZ for mobile applications. It includes: - Flow rates from 3 to 31 GPM and displacement volumes from 10.8 to 100 ml/rev. - Maximum pressure of 275 bar (except some models which are 210 bar maximum) - Speed range of 400 to 2800 RPM (some models 2500 RPM max) with petroleum-based fluids - Mounting flexibility of up to 32 positions - Shaft design options of keyed, keyed, or keyed - Dimensions, port configurations, and operating characteristics including flow and power at various pressures and RPMs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Denison Double Pump T6CCZ Eng

    Uploaded by

    Eustahije Brzic
    65 views5 pages
    This document provides specifications for the Denison Hydraulics vane double pump series T6CCZ for mobile applications. It includes: - Flow rates from 3 to 31 GPM and displacement volumes from 10.8 to 100 ml/rev. - Maximum pressure of 275 bar (except some models which are 210 bar maximum) - Speed range of 400 to 2800 RPM (some models 2500 RPM max) with petroleum-based fluids - Mounting flexibility of up to 32 positions - Shaft design options of keyed, keyed, or keyed - Dimensions, port configurations, and operating characteristics including flow and power at various pressures and RPMs.

    Original Description:

    Denison Double Pump TCCZ Hidraulična dupla pumpa Denison TCCZ

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the Denison Hydraulics vane double pump series T6CCZ for mobile applications. It includes: - Flow rates from 3 to 31 GPM and displacement volumes from 10.8 to 100 ml/rev. - Maximum pressure of 275 bar (except some models which are 210 bar maximum) - Speed range of 400 to 2800 RPM (some models 2500 RPM max) with petroleum-based fluids - Mounting flexibility of up to 32 positions - Shaft design options of keyed, keyed, or keyed - Dimensions, port configurations, and operating characteristics including flow and power at various pressures and RPMs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views5 pages

    Denison Double Pump T6CCZ Eng

    Uploaded by

    Eustahije Brzic
    This document provides specifications for the Denison Hydraulics vane double pump series T6CCZ for mobile applications. It includes: - Flow rates from 3 to 31 GPM and displacement volumes from 10.8 to 100 ml/rev. - Maximum pressure of 275 bar (except some models which are 210 bar maximum) - Speed range of 400 to 2800 RPM (some models 2500 RPM max) with petroleum-based fluids - Mounting flexibility of up to 32 positions - Shaft design options of keyed, keyed, or keyed - Dimensions, port configurations, and operating characteristics including flow and power at various pressures and RPMs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    DENISON HYDRAULICS

    vane double pump


    series T6CCZ - mobile application

    Publ. 1 - EN0706 - A

    11 / 99 / 3000 / FB

    Replace : 1 - EN 080 - B

    L13 - 10706 - 1

    Back To The Table Of Content

    ORDERING CODE SERIES T6CCZ

    Model N.

    T6CCZ . - B22 - B10 - X R 00 - A - 1 00 Modifications

    Series - SAE B 2 bolts


    Mounting flange J 744 c
    One letter can be added to specify
    special parts in series

    P1

    Cam ring for "P1" and "P2"


    (Delivery at 0 bar & 1500 r.p.m.)
    B03 = 16,2 l/min
    B05 = 25,8 l/min
    B06 = 31,9 l/min
    B08 = 39,6 l/min
    B10 = 51,1 l/min
    B12 = 55,6 l/min
    B14 = 69,0 l/min
    B17 = 87,4 l/min
    B20 = 95,7 l/min
    B22 =105,4 l/min
    B25 =118,9 l/min
    B28 =133,2 l/min
    B31 =150,0 l/min

    P2

    Mounting W/ connection variables

    P2
    Code

    P1 = 1"
    UNC
    1" 3/4"
    00
    01

    S = 3"
    Metric
    1" 3/4"
    0M WO

    P1 = 1"
    UNC
    1" 3/4"
    10
    11

    S = 2"1/2
    Metric
    1" 3/4"
    1M W1

    P2
    Code
    Seal class
    1 = S1 (for mineral oil )
    Design letter

    Porting combination (see page 3)


    Direction of rotation (view on shaft end)
    R = clockwise
    L = counter-clockwise

    Internal leakage (typical)

    Internal leakage qVs [l/min]

    Type of shaft
    X = keyed
    V = keyed
    W = keyed

    Power loss hydromechanics (typical)

    Power loss Ps [kW]

    Pressure p [bar]

    Noise level (typical)

    Lp. Noise level [db(A)] 1 m ISO 4412

    Pressure p [bar]

    Pressure p [bar]

    Back To The Table Of Content

    SERIES T6CCZ

    Porting combination

    General Description

    The T6CCZ pump incorporates DENISON Hydraulics high quality and performances
    of T6CC series vane pumps mobile application.
    High maximum permissible shaft loads is particularly well adapted to applications of
    pump driven by cardan.
    A double raw ball bearing and a needle bearing double the permissible radial load
    compare to standard T6CC bearing capability. (see page 4).

    Greater Flow

    3 to 31 GPM, 10 to 100 ml/rev.

    Higher Pressure

    275 bar maximum except B28 and B31 cartridge 210 bar.

    Wider Speed Range

    400 up to 2800 RPM with petroleum based antiwear R & O fluids which are the
    recommended fluids.(except B25, B28, B31 - 2500 RPM max. speed)

    Better Efficiency

    Better than 94 % for energy saving.

    Mounting Flexibility

    Up to 32 positions.

    Wider range of acceptable


    viscosity

    2000 cSt max. viscosity (cold start low speed and pressure).
    30 cSt optimum (max. life).
    10 cSt minimum (full speed and pressure)

    Back To The Table Of Content

    CURVE SERIES T6CCZ

    Load F [N]

    Permissible radial load


    Shaft code X

    Speed n [RPM]

    Load F [N]

    Permissible radial load


    Shaft code V

    Speed n [RPM]

    Load F [N]

    Permissible radial load


    Shaft code W

    Speed n [RPM]

    These curves permit to simultaneously check the maximum permissible radial and axial
    load on the shaft involved. Those load value are determined for 10 000 hours bearing
    lifetime at operating under Fa and F given to get information for a different lifetime the
    radial load corrected is.
    If Fa is smaller than minimum axial force on the curves then
    F curve
    Correct F =
    LH = Lifetime in hours
    L H Required
    3,33

    10000
    If Fa is higher than minimum axial force then F radial load is :
    F curve
    Correct F =
    LH Required
    3

    10000

    Back To The Table Of Content

    DIMENSIONS & OPERATING CHARACTERISTICS SERIES T6CCZ

    Shaft torque limits [ml/rev. x bar]


    Shaft
    Vi x p max P1 + P2
    X
    25400
    V
    32670
    W
    32670

    Alternate Port
    F
    G
    H
    Code
    A
    B
    C
    D
    E
    K

    00
    52,4
    26,2
    25,4

    01 1)
    47,7
    22,4
    19,0

    74,7
    76,2
    3/8"-16 UNC x 19,0 deep
    5/8"-11UNC x 28,4 deep

    Pressure
    Volumetric
    port Series displ. Vi
    ml/rev.

    P1
    &
    P2

    B03
    B05
    B06
    B08
    B10
    B12
    B14
    B17
    B20
    B22
    B25*
    B28*
    B31*

    0M
    52,4
    26,2
    25,4

    W0 1)
    47,7
    22,4
    19,0

    74,7
    76,2
    M10 x 19,0 deep
    M16 x 28,4 deep

    11 1)
    47,7
    22,4
    19,0

    10
    52,4
    26,2
    25,4

    74,7
    76,2
    3/8"-16 UNC x 19,0 deep
    1/2"-13 UNC x 23,9 deep

    1M
    52,4
    26,2
    25,4

    W1 1)
    47,7
    22,4
    19,0

    74,7
    76,2
    M10 x 19,0 deep
    M12 x 23,9 deep

    2) P1 + P2 = 126 cm3/rev max.

    1) max. cam 014

    Operating characteristics - typical


    (24 cSt)

    S = 2" 1/2 2)
    88,9
    50,8
    63,5

    S = 3"
    106,4
    61,9
    76,2

    10,8
    17,2
    21,3
    26,4
    34,1
    37,1
    46,0
    58,3
    63,8
    70,3
    79,3
    88,8
    100,0

    Flow qV [l/min]
    n = 1500 RPM - p at
    0 bar
    140 bar
    240 bar
    16,2
    10,7
    25,8
    20,3
    15,8
    31,9
    26,4
    21,9
    39,6
    34,1
    29,6
    51,1
    45,6
    41,1
    55,6
    50,1
    45,6
    69,0
    63,5
    59,0
    87,4
    81,9
    77,4
    95,7
    90,7
    85,7
    105,4
    99,9
    95,4
    118,9
    113,4
    108,9
    133,2
    127,7
    124,5**
    150,0
    144,5
    141,3**

    Input power P [kW]


    n = 1500 RPM - p at
    7 bar
    140 bar
    240 bar
    1,3
    5,3
    1,4
    7,5
    12,2
    1,5
    8,9
    14,7
    1,6
    10,7
    17,7
    1,7
    13,4
    22,3
    1,7
    14,4
    24,1
    1,9
    17,6
    29,5
    2,1
    21,9
    36,9
    2,2
    23,8
    40,2
    2,3
    26,1
    44,1
    2,5
    29,2
    49,5
    2,8
    32,7
    48,5**
    2,8
    36,5
    54,4**

    * B25 - B28 - B31 = 2500 R.P.M. max.


    ** B28 - B31 = 210 bar max. int.
    - Not to use because internal greater than 50 % theoretical flow.

    Back To The Table Of Content

    You might also like