Windows Cluster Interview Questions and Answers

Windows Cluster Interview Questions and Answers
1 of 6
http://yourcomputer.in/windows-cluster-interview-questions-and-answers/

By Ravi Chopra | June 9, 2013
3 Comments

Here are some windows cluster Interview Questions and Answers for windows administrator
What is Clustering. Brie y de ne & explain it ?
Clustering is a technology, which is used to provide High Availability for mission critical applications. We can con)gure cluster by installing MCS (Microsoft cluster service) component from Add remove programs, which can only
available in Enterprise Edition and Data center edition.
Types of Clusters ?
In Windows we can con)gure two types of clusters
1. NLB (network load balancing) cluster for balancing load between servers. This cluster will not provide any high
availability. Usually preferable at edge servers like web or proxy.
2. Server Cluster: This provides High availability by con)guring active-active or active-passive cluster. In 2 node active-passive cluster one node will be active and one node will be stand by. When active server fails the application
will FAILOVER to stand by server automatically. When the original server backs we need to FAILBACK the application
What is Quorum ? A shared storage need to provide for all servers which keeps information about clustered application and session state and is useful in FAILOVER situation. This is very important if Quorum disk fails entire cluster will fails.
8/20/2015 10:47 AM
2 of 6
Why Quorum is necessary ?

When network problems occur, they can interfere with communication between cluster nodes. A small set of
nodes might be able to communicate together across a functioning part of a network, but might not be able to
communicate with a di9erent set of nodes in another part of the network. This can cause serious issues. In this
split situation, at least one of the sets of nodes must stop running as a cluster.
To prevent the issues that are caused by a split in the cluster, the cluster software requires that any set of nodes
running as a cluster must use a voting algorithm to determine whether, at a given time, that set has quorum. Because a given cluster has a speci)c set of nodes and a speci)c quorum con)guration, the cluster will know how
many votes constitutes a majority (that is, a quorum). If the number drops below the majority, the cluster stops
running. Nodes will still listen for the presence of other nodes, in case another node appears again on the network, but the nodes will not begin to function as a cluster until the quorum exists again.
For example, in a )ve node cluster that is using a node majority, consider what happens if nodes 1, 2, and 3 can
communicate with each other but not with nodes 4 and 5. Nodes 1, 2, and 3 constitute a majority, and they continue running as a cluster. Nodes 4 and 5 are a minority and stop running as a cluster, which prevents the problems
of a split situation. If node 3 loses communication with other nodes, all nodes stop running as a cluster. However, all functioning nodes will continue to listen for communication, so that when the network begins working
again, the cluster can form and begin to run.
Di,erent types of Quorum in Windows server 2008 ?
1.Node Majority Used when Odd number of nodes are in cluster.
2.Node and Disk Majority Even number of nodes(but not a multi-site cluster)
3.Node and File Share Majority Even number of nodes, multi-site cluster
4.Node and File Share Majority Even number of nodes, no shared storage
Di,erent types of Quorum in Windows server 2003 ?
Standard Quorum : As mentioned above, a quorum is simply a con)guration database for MSCS, and is stored in
the quorum log )le. A standard quorum uses a quorum log )le that is located on a disk hosted on a shared storage
interconnect that is accessible by all members of the cluster.
Standard quorums are available in Windows NT 4.0 Enterprise Edition, Windows 2000 Advanced Server, Windows
2000 Datacenter Server, Windows Server 2003 Enterprise Edition and Windows Server 2003 Datacenter Edition.
Majority Node Set Quorums : A majority node set (MNS) quorum is a single quorum resource from a server cluster
perspective. However, the data is actually stored by default on the system disk of each member of the cluster. The
MNS resource takes care to ensure that the cluster con)guration data stored on the MNS is kept consistent across
the di9erent disks.
Majority node set quorums are available in Windows Server 2003 Enterprise Edition, and Windows Server 2003 Datacenter Edition.
Explain about each Quorum type ?
8/20/2015 10:47 AM
3 of 6
Node Majority: Each node that is available and in communication can vote. The cluster functions only with a majority of the votes, that is, more than half.
Node and Disk Majority: Each node plus a designated disk in the cluster storage (the disk witness) can vote,
whenever they are available and in communication. The cluster functions only with a majority of the votes, that is,
more than half.
Node and File Share Majority: Each node plus a designated )le share created by the administrator (the )le share
witness) can vote, whenever they are available and in communication. The cluster functions only with a majority
of the votes, that is, more than half.
No Majority: Disk Only: The cluster has quorum if one node is available and in communication with a speci)c disk
in the cluster storage.
How is the quorum information located on the system disk of each node kept in synch?
The server cluster infrastructure ensures that all changes are replicated and updated on all members in a cluster.
Can this method be used to replicate application data as well?
No, that is not possible in this version of clustering. Only Quorum information is replicated and maintained in a
synchronized state by the clustering infrastructure.
Can I convert a standard cluster to an MNS cluster?
Yes. You can use Cluster Administrator to create a new Majority Node Set resource and then, on the cluster properties sheet Quorum tab, change the quorum to that Majority Node Set resource.
What is the di,erence between a geographically dispersed cluster and an MNS cluster?
A geographic cluster refers to a cluster that has nodes in multiple locations, while an MNS-based cluster refers to
the type of quorum resources in use. A geographic cluster can use either a shared disk or MNS quorum resource,
while an MNS-based cluster can be located in a single site, or span multiple sites.
What is the maximum number of nodes in an MNS cluster?
Windows Server 2003 supports 8-node clusters for both Enterprise Edition and Datacenter Edition.
Do I need special hardware to use an MNS cluster?
There is nothing inherent in the MNS architecture that requires any special hardware, other than what is required
for a standard cluster (for example, there must be on the Microsoft Cluster HCL). However, some situations that
8/20/2015 10:47 AM
4 of 6
use an MNS cluster may have unique requirements (such as geographic clusters), where data must be replicated in
real time between sites.
Does a cluster aware application need to be rewritten to support MNS?

No, using an MNS quorum requires no change to the application. However, some cluster aware applications expect
a shared disk (for example SQL Server 2000), so while you do not need shared disks for the quorum, you do need
shared disks for the application.
Does MNS get rid of the need for shared disks?
It depends on the application. For example, clustered SQL Server 2000 requires shared disk for data. Remember,
MNS only removes the need for a shared disk quorum.
What does a failover cluster do in Windows Server 2008 ?
A failover cluster is a group of independent computers that work together to increase the availability of applications and services. The clustered servers (called nodes) are connected by physical cables and by software. If one of
the cluster nodes fails, another node begins to provide service (a process known as failover). Users experience a
minimum of disruptions in service.
What new functionality does failover clustering provide in Windows Server 2008 ?
New validation feature. With this feature, you can check that your system, storage, and network con)guration is
suitable for a cluster.
Support for GUID partition table (GPT) disks in cluster storage. GPT disks can have partitions larger than two terabytes and have built-in redundancy in the way partition information is stored, unlike master boot record (MBR)
disks.
What happens to a running Cluster if the quorum disk fails in Windows Server 2003 Cluster ?
In Windows Server 2003, the Quorum disk resource is required for the Cluster
to function. In your example, if the Quorum disk suddenly became unavailable
to the cluster then both nodes would immediately fail and not be able to
8/20/2015 10:47 AM
5 of 6
restart the clussvc.

In that light, the Quorum disk was a single point of failure in a Microsoft
Cluster implementation. However, it was usually a fairly quick workaround to
get the cluster back up and operational. There are generally two solutions
to that type of problem.
1. Detemrine why the Quorum disk failed and repair.
2. Reprovision a new LUN, present it to the cluster, assign it a drive
letter and format. Then start one node with the /FQ switch and through
cluadmin designate the new disk resource as the Quorum. Then stop and
restart the clussvc normally and then bring online the second node.
What happens to a running Cluster if the quorum disk fails in Windows Server 2008 Cluster ?
Cluster continue to work but failover will not happen in case of any other failure in the active node.
Please Rate & Comment !

Rating: 4.3/5 (8 votes cast)
Windows Cluster Interview Questions and Answers, 4.3 out of 5 based on 8 ratings
SEARCH
Share
Related Posts
Exchange Inter-
Whats new in Win- Vmware interview
Di9erence be-
Windows 2008 R2
view questions
dows Server 2008
tween windows
backup issue
with Answers
Cluster
questions
2003 and 2008
Category: Interview Questions Windows Tags: windows cluster
8/20/2015 10:47 AM
6 of 6
About Ravi Chopra

I am an IT professional working in the industry for the last 10 years. I am here to share my Technical experience and
knowledge with all of you.
View all posts by Ravi Chopra
Comments
Active Directory Interview questions with answersYourComputer.in | TechBlog | by Ravi Chopra says:
November 5, 2013 at 12:02 am
[ ] Windows Cluster Interview questions :- http://yourcomputer.in/windows-cluster-interview-questionsand-answers [ ]
Wintel Interview Questions and AnswersYourComputer.in | TechBlog | by Ravi Chopra says:
November 22, 2013 at 11:56 pm
[ ] Further Explained :- http://yourcomputer.in/windows-cluster-interview-questions-and-answers/ [ ]
Iconic One Theme | Powered by Wordpress
8/20/2015 10:47 AM

Windows Cluster Interview Questions and Answers

Uploaded by

Copyright:

Available Formats

Windows Cluster Interview Questions and Answers

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Windows Cluster Interview Questions and Answers

Uploaded by

Copyright:

Available Formats

What is clustering and what are its main benefits?

What is clustering and what are its main benefits?

What are the different types of clusters in Windows?

What are the different types of clusters in Windows?

Windows Cluster Interview Questions and Answers