Siemens Simatic st70n Catalogue 2014-Eng PDF

Siemens AG 2014
Products for Totally

Integrated Automation
SIMATIC
Catalog
News
ST 70 N
Edition
2014
Answers for industry.
Siemens AG 2014
Related catalogs
SIMATIC
Products for
Totally Integrated Automation
ST 70
E86060-K4670-A101-B4-7600
Industrial Communication
SIMATIC NET
IK PI
E86060-K6710-A101-B7-7600
SIMATIC HMI /
ST 80/ST PC
PC-based Automation
Human Machine Interface Systems
PC-based Automation
E86060-K4680-A101-C1-7600
SIMATIC
SIMATIC PCS 7
Process Control System
ST PCS 7
E86060-K4678-A111-B9-7600
SITOP
Power supply
SITOP
KT 10.1
E86060-K2410-A111-A9-7600
SIMATIC Ident
Industrial Identification Systems
ID 10
E86060-K8310-A101-A9-7600
SITRAIN
Training for Industry
ITC
Only available in German

E86060-K6850-A101-C4
Products for Automation and Drives

Interactive Catalog, DVD
E86060-D4001-A510-D3-7600
Mall
Information and Ordering Platform
in the Internet:
www.siemens.com/industrymall
CA 01
Response E-mail
Please send your comments and suggestions
for improvement to
[email protected]
(include the catalog name in the subject field)
Siemens AG 2014
SIMATIC
Products for
Catalog News ST 70 N 2014
The products and systems described in this

catalog are manufactured/distributed under
application of a certified
quality management
system in accordance
with DIN EN ISO 9001
(Certified Registration
No. 1323-QM08). The
certificate is recognized
by all IQNet countries.
Refer to the Industry Mall for current updates

of this catalog:
The products contained in this
catalog can also be found in the
Interactive Catalog CA 01.
Article No.:
E86060-D4001-A510-D3-7600
Please contact your local Siemens branch
Introduction
LOGO! logic module
SIMATIC S7-1200
SIMATIC S7-1500
SIMATIC S7-300
SIMATIC S7-400
Embedded Controller
SIMATIC PC-based controllers
SIMATIC ET 200 distributed I/O
SIMATIC control systems
10
Software for SIMATIC controllers
11
SIMATIC programming devices
12
Overviews
13
Supplementary components
14
Appendix
15
Siemens AG 2014
Printed on paper from

sustainably managed
forests and controlled
sources.
www.pefc.org
Siemens AG 2014
Siemens ST 70 N 2014
Siemens AG 2014
Answers for industry.

Integrated technologies, vertical market expertise and services
for greater productivity, energy efficiency, and flexibility.
The Siemens Industry Sector is the

world's leading supplier of innovative
and environmentally friendly products
and solutions for industrial companies.
End-to-end automation technology and
industrial software, solid market expertise, and technology-based services are
the levers we use to increase our customers productivity, efficiency and
flexibility. With a global workforce of
more than 100 000 employees,
the Industry Sector comprises the
Industry Automation, Drive Technologies, and Customer Services divisions,
as well as the Metals Technologies
Business Unit.
We consistently rely on integrated technologies and, thanks to our bundled

portfolio, we can respond more quickly
and flexibly to our customers' wishes.
With our globally unmatched range of
automation technology, industrial
control and drive technology as well
as industrial software, we equip companies with exactly what they need over
their entire value chain from product
design and development to production,
sales and service. Our industrial customers benefit from our comprehensive
portfolio, which is tailored to their
market and their needs.
Market launch times can be reduced by

up to 50% due to the combination of
powerful automation technology and
intelligent industrial software from
Siemens Industry. At the same time,
the costs for energy or waste water
for a manufacturing company can be
reduced significantly. In this way, we
increase our customers competitive
strength and make an important contribution to environmental protection
with our energy-efficient products and
solutions.
Siemens AG 2014
(53 (QWHUSULVH5HVRXUFH3ODQQLQJ
3/0 3URGXFW/LIHF\FOH0DQDJHPHQW
0DQDJHPHQW/HYHO
3URGXFW'HVLJQ
3URGXFWLRQ3ODQQLQJDQG6LPXODWLRQ
'DWD0DQDJHPHQW
0(60DQXIDFWXULQJ([HFXWLRQ6\VWHPV
3ODQW(QJLQHHULQJ
6,0$7,&,7
&2026
(WKHUQHW
2SHUDWLRQV/HYHO
6,0$7,&3&6
2SHUDWRU6\VWHP

0DLQWHQDQFH
$VVHW0DQDJHPHQW
(QHUJ\
0DQDJHPHQW
(QJLQHHULQJ
6WDWLRQ
6,0$7,&:LQ&&
6&$'$6\VWHP
,QGXVWULDO(WKHUQHW
7,$3RUWDO
&RQWURO/HYHO
6,0$7,&3&6

$XWRPDWLRQ
6\VWHP
6,180(5,.
&RPSXWHU1XPHULF&RQWURO
6,027,21
0RWLRQ&RQWURO
6,0$7,&1(7
,QGXVWULDO
&RPPXQLFDWLRQ
6,0$7,&&RQWUROOHU

0RGXODU3&%DVHG
6,0$7,&+0,
+XPDQ0DFKLQH,QWHUIDFH
6,0$7,&'LVWULEXWHG,2
6,1$0,&6'ULYH6\VWHPV
6,5,86,QGXVWULDO&RQWUROV
)LHOG/HYHO
352),%863$
3URFHVV,QVWUXPHQWDWLRQ
7RWDOO\
,QWHJUDWHG
$XWRPDWLRQ
6,0$7,&,GHQW

,QGXVWULDO,GHQWLILFDWLRQ
+$57
/RZ9ROWDJH'LVWULEXWLRQ
,2/LQN
6,027,&60RWRUV
Efficient automation starts with

efficient engineering.
Totally Integrated Automation: Efficiency driving productivity.
Efficient engineering is the first step toward better production that is faster,
more flexible, and more intelligent. With all components interacting efficiently,
Totally Integrated Automation (TIA) delivers enormous time savings right from
the engineering phase. The result is lower costs, faster time-to-market, and
greater flexibility.
6,7233RZHU6XSSO\
Siemens AG 2014
A unique complete approach for all industries

Efficient interoperability of all automation components
As one of the world's leading automation suppliers,

Siemens provides an integrated, comprehensive portfolio
for all requirements in process and manufacturing industries.
All components are mutually compatible and system-tested.
This ensures that they reliably perform their tasks in industrial
use and interact efficiently, and that each automation solution can be implemented with little time and effort based
on standard products. The integration of many separate individual engineering tasks into a single engineering environment, for example, provides enormous time and cost savings.
With its comprehensive technology and industry-specific
expertise, Siemens is continuously driving progress in manufacturing industries and Totally Integrated Automation plays
a key role.
Totally Integrated Automation creates real value added in
all automation tasks, especially for:
352),1(7
,QGXVWULDO(WKHUQHW
352),%86
$6,QWHUIDFH
.1;*$00$LQVWDEXV
7RWDOO\
,QWHJUDWHG
3RZHU
Integrated engineering
Consistent, comprehensive engineering throughout the
entire product development and production process
Industrial data management
Access to all important data occurring in productive
operation along the entire value chain and across
all levels
Industrial communication
Integrated communication based on international
cross-vendor standards that are mutually compatible
Industrial security
Systematic minimization of the risk of an internal or
external attack on plants and networks
Safety Integrated
Reliable protection of personnel, machinery, and the
environment thanks to seamless integration of safety
technologies into the standard automation
Making things right with Totally Integrated Automation

Totally Integrated Automation, industrial automation from
Siemens, stands for the efficient interoperability of all automation components. The open system architecture covers
the entire production process and is based on end-to-end
shared characteristics: consistent data management, global
standards, and uniform hardware and software interfaces.
Totally Integrated Automation lays the foundation for
comprehensive optimization of the production process:
Time and cost savings due to efficient engineering
Minimized downtime due to integrated diagnostic
functions
Simplified implementation of automation solutions due
to global standards
Better performance due to interoperability of systemtested components
Siemens AG 2014
Totally Integrated Power:

Future-proof power supply
from one source.
Siemens AG 2014
Software tools, products, systems and

support for integrated electrical
power distribution
Energy Management/
Energy Transparency
Operation &
Monitoring
Load
management
Load curves
Forecast
Maintenance
Substation
Distribution
Maintenance
task
Status
reporting/
failure
management
Protocols
Power
Quality
DATE:
Cost center
EMPLOYEE
COST CENTER
PAY PERIOD BEGINNING
PAY PERIOD ENDING
DATE
SUN
MON
TUE
WED
THUR
FRI
SAT
SUN
TOTAL
IN
OUT
IN
OUT
OVERTIME
TOTAL HOURS
DATE
SUN
MON
TUE
WED
THUR
FRI
SUN
MON
TUE
WED
THUR
FRI
SAT
SUN
TOTAL
IN
OUT
U
I
cos o
P
W
IN
Hall 1
Distribution 3
Process/
industrial automation
Products & Systems
Infeed II
Renewables
Medium voltage with

protection technology
Air conditioning system

checkup
Replacing circuit
breaker contacts
Replacing meters
OUT
OVERTIME
TOTAL HOURS
central ON
OFF
local ON
OFF
tripped
Transformer
DATE
SAT
SUN
TOTAL
IN
OUT
IN
OUT
Building
automation
OVERTIME
TOTAL HOURS
Low voltage with

protection and measuring technology
110 kV
Planning Software Tools
The power supply system acts like a

vital artery, forming the basis for
the reliable and efficient functioning
of all electrically operated building
installations. Electrical power distribution therefore requires integrated
solutions. Our answer:
Totally Integrated Power (TIP).
This includes software tools and
support for planning and configuration
and a complete, optimally aligned
product and system portfolio for
integrated power distribution from
medium-voltage switchgear right to
socket outlets.
Network dimensioning
with SIMARIS design
Space requirements and budget calculation

with SIMARIS project
The power distribution products and

systems can be interfaced to building
or industrial automation systems
(Total Building Solutions or
Totally Integrated Automation) via
communication-capable circuit breakers
and components, allowing the full potential for optimization that an integrated solution offers to be exploited
throughout the project cycle from
planning right through to installation
and operation.
Visualization of device characteristics

with SIMARIS curves
Get more information:

www.siemens.com/tip
www.siemens.com/simaris
www.siemens.com/specifications
Siemens AG 2014
Siemens AG 2014
LOGO! logic module

2/2
2/2
2/2
2/2
SIPLUS add-ons
SIPLUS LOGO! PROM
LOGO! mounting kit
SIPLUS upmiter
Brochures
For brochures serving as selection
guides for SIMATIC products refer to:
www.siemens.com/simatic/
printmaterial
Siemens AG 2014
LOGO! logic module

SIPLUS add-ons
SIPLUS LOGO! PROM, LOGO! mounting kit,
SIPLUS upmiter
Overview SIPLUS LOGO! PROM
Overview LOGO! mounting kit
LOGO! and SIPLUS LOGO! are designed for quick and easy
mounting on standard rails. With the mounting kit, these devices
can also be easily and safely installed in front panels. If the
supplied washer and seals are used, the devices are reliably
protected against harsh environmental conditions up to the IP65
degree of protection.
Ordering data
LOGO! PROM is the programming device for easy reproduction
of up to 8 LOGO! program modules. Copying is performed from
a master module or via the PC program LOGO! Soft Comfort.
LOGO! PROM supports yellow and red program modules. Only
yellow modules can be used as master modules, because red
modules cannot be copied due to the know-how protection
implemented.
A multi-colored LED on each module slot provides detailed information about the status of the respective program module and
the copying procedure.
Ordering data
LOGO! PROM
Article No.
Front panel mounting kit

Width 4 width units
6AG1057-1AA00-0AA0
Width 4 width units, with keys
6AG1057-1AA00-0AA3
Width 8 width units
6AG1057-1AA00-0AA1
Width 8 width units, with keys
6AG1057-1AA00-0AA2
Overview SIPLUS upmiter
Article No.
6AG1057-1AA01-0BA6
Programming device used to

simultaneously reproduce program
module contents on up to
8 program modules
The SIPLUS upmiter upstream device ensures reliable operation

of SIPLUS devices connected to the batteries of internal
combustion engines. SIPLUS upmiter provides the devices with
a constant voltage supply.
Ordering data
Article No.
SIPLUS upmiter upstream device

For reliable operation of combustion
engines supplied by battery
2/2
Output current 1.25 A

(LOGO! style)
6AG1053-1AA00-2AA0
Output current 2.5 A (S7-200 style)
6AG1203-1AA00-2AA0
Output current 4 A (S7-300 style)
6AG1305-1AA00-2AA0
Siemens AG 2014
SIMATIC S7-1200
3/2
3/2
3/6
3/10
3/14
3/18
Central processing units

CPU 1211C
CPU 1212C
CPU 1214C
CPU 1215C
CPU 1217C
3/21
3/21
3/23
3/25
SIPLUS digital modules

SIPLUS SM 1221 digital input modules
SIPLUS SM 1222 digital output modules
SIPLUS SM 1223 digital input/output
modules
3/27
3/27
3/29
Analog modules
SM 1231 thermocouple modules
SM 1231 RTD signal modules
3/32
3/32
3/33
3/34
3/35
3/36
SIPLUS analog modules

SIPLUS SM 1231 analog input modules
SIPLUS SM 1232 analog output modules
SIPLUS SM 1234 analog input/output
modules
SIPLUS SM 1231 thermocouple modules
SIPLUS SM 1231 RTD signal modules
3/37
3/37
3/38
Special modules
SM 1278 4xIO-Link Master
SIWAREX WP231
3/40
3/40
Communication
CM 1241 communication modules
3/42
3/42
SIPLUS communication
SIPLUS CM 1241 communication
modules
SIPLUS CB 1241 RS485 communication
board
SIPLUS NET CSM 1277
3/44
3/45
3/46
3/46
Operator control and monitoring

SIMATIC HMI Basic Panels
(2nd Generation)
3/48
Add-on products
from third-party manufacturers
SIMATIC S7-1200 CM CANopen
3/48
Brochures
printmaterial
Siemens AG 2014
SIMATIC S7-1200
CPU 1211C
Overview
The clever compact solution
With 10 integral input/outputs
Expandable by:
- 1 signal board (SB) or communication board (CB)
- Max. 3 communication modules (CM)
Technical specifications
6ES7211-1BE40-0XB0
CPU 1211C AC/DC/relay
Supply voltage
24 V DC
6ES7211-1AE40-0XB0
CPU 1211C DC/DC/DC
6ES7211-1HE40-0XB0
CPU 1211C DC/DC/relay
Yes
Yes
120 V AC
Yes
230 V AC
Yes
Encoder supply
24 V encoder supply
24 V
Permissible range: 20.4 to 28.8 V
Power losses
Power loss, typ.
10 W
8W
8W
Memory
Work memory
integrated
30 kbyte
30 kbyte
30 kbyte
1 Mbyte
2 Gbyte; with SIMATIC memory card
1 Mbyte
1 Mbyte
Backup
without battery
Yes
Yes
Yes
CPU processing times

for bit operations, typ.
0.085 s; / Operation
for word operations, typ.
1.7 s; / Operation
1.7 s; / Operation
1.7 s; / Operation
for floating point arithmetic, typ.
2.3 s; / Operation
2.3 s; / Operation
2.3 s; / Operation
4 kbyte; Size of bit memory address

area

area

area
Address area
Process image
Inputs, adjustable
Outputs, adjustable
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
Time of day
Clock
Hardware clock (real-time clock)
Yes
Yes
Yes
Load memory
integrated
Plug-in (SIMATIC Memory Card),
max.
Data areas and their retentivity

Flag
Number, max.
3/2
Siemens AG 2014
SIMATIC S7-1200
CPU 1211C
Technical specifications (continued)

6ES7211-1BE40-0XB0
6ES7211-1AE40-0XB0
CPU 1211C DC/DC/DC
6ES7211-1HE40-0XB0
Digital inputs
Number of digital inputs
of which, inputs usable for technological functions
6; integrated
6; HSC (High Speed Counting)
6; integrated
6; integrated
Digital outputs
Number of digital outputs
of which high-speed outputs
4; Relays
4
4; 100 kHz Pulse Train Output
4; Relays
Analog inputs
Integrated channels (AI)
2; 0 to 10 V
2; 0 to 10 V
2; 0 to 10 V
Input ranges
Voltage
Yes
Yes
Yes
1st interface
Interface type
PROFINET
PROFINET
PROFINET
Physics
Ethernet
Ethernet
Ethernet
Functionality
PROFINET IO Device
PROFINET IO Controller
Yes
Yes
Yes
Yes
Yes
Yes
Communication functions
S7 communication
supported
Yes
Yes
Yes
Open IE communication
TCP/IP
ISO-on-TCP (RFC1006)
UDP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Web server
supported
Yes
Yes
Yes
Integrated Functions
Number of counters
Counter frequency (counter) max.
100 kHz
100 kHz
100 kHz
Frequency meter
Yes
Yes
Yes
controlled positioning
Yes
Yes
Yes
PID controller
Yes
Yes
Yes
Number of alarm inputs
Number of pulse outputs
Limit frequency (pulse)
100 kHz
Ambient conditions
Operating temperature
Min.
max.
-20 C
60 C
-20 C
60 C
-20 C
60 C
Configuration
programming
Programming language
- LAD
- FBD
- SCL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
90 mm
90 mm
90 mm
Height
100 mm
100 mm
100 mm
Depth
75 mm
75 mm
75 mm
Weights
Weight, approx.
420 g
370 g
380 g
3/3
Siemens AG 2014
SIMATIC S7-1200
CPU 1211C
Ordering data
Article No.
CPU 1211C
Article No.
SB 1223 signal board
Compact CPU, AC/DC/relay;

integral program/data memory
25 KB, load memory 1 MB;
wide-range power supply
85 ... 264 V AC;
Boolean execution times
0.1 s per operation;
6 digital inputs, 4 digital outputs
(relays), 2 analog inputs;
expandable by up to
3 communication modules and
1 signal board/communication
board;
digital inputs can be used
as HSC at 100 kHz
6ES7211-1BE40-0XB0
Compact CPU, DC/DC/DC;

integrated program/data memory
power supply 24 V DC;
6 digital inputs, 4 digital outputs,
2 analog inputs;
expandable by up to
board;
as HSC at 100 kHz,
24 V DC digital outputs can be
used as pulse outputs (PTO) or
pulse-width modulated outputs
(PWM) at 100 kHz
6ES7211-1AE40-0XB0
Compact CPU, DC/DC/relay;

expandable by up to
board;
as HSC at 100 kHz
6ES7211-1HE40-0XB0
2 inputs, 24 V DC,
IEC type 1 current sinking;
2 x 24 V DC transistor outputs,
0.5 A, 5 W;
can be used as HSC
at up to 30 kHz
6ES7223-0BD30-0XB0
2 inputs, 5 V DC, 200 kHz

2 outputs 5 V DC, 0.1 A, 200 kHz
6ES7223-3AD30-0XB0

6ES7223-3BD30-0XB0
6ES7231-4HA30-0XB0
1 analog input, 10 V with 12 bits

or 0 ... 20 mA with 11 bits
SB 1231 thermocouple signal
board
6ES7231-5QA30-0XB0
1 input +/- 80 mV, resolution 15 bits

+ sign, thermocouples type J, K
SB 1231 RTD signal board
6ES7231-5PA30-0XB0
1 input for resistance temperature

sensors Pt 100, Pt 200, Pt 500,
Pt 1000, resolution 15 bits + sign
6ES7232-4HA30-0XB0
1 analog output, 10 V with 12 bits

or 0 to 20 mA with 11 bits
CB 1241 RS485 communication
board
6ES7241-1CH30-1XB0
For point-to-point connection,

with 1 RS485 interface
Simulator (optional)
8 input switches,
for CPU 1211C / CPU 1212C
6ES7274-1XF30-0XA0
SIMATIC Memory Card (optional)

4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
24 MB
6ES7954-8LF02-0AA0
2 GB
6ES7954-8LP01-0AA0
Terminal block (spare part)

6ES7221-3AD30-0XB0
For CPU 1211C/1212C
6ES7221-3BD30-0XB0
For DI, with 14 screws,

tin-plated; 4 units
6ES7292-1AH30-0XA0
For DO, with 8 screws,

tin-plated; 4 units
6ES7292-1AP30-0XA0
For AI, with 3 screws,

tin-plated; 4 units
6ES7292-1BC30-0XA0

4 outputs, 5 V DC, 0.1 A, 200 kHz
6ES7222-1AD30-0XB0
6ES7222-1BD30-0XB0
RJ45 cable grip

4 items per pack
Single port
6ES7290-3AA30-0XA0
Front flap set (spare part)

For CPU 1211C/1212C
3/4
6ES7291-1AA30-0XA0
Siemens AG 2014
SIMATIC S7-1200
CPU 1211C
Ordering data
Article No.
S7-1200 automation system,

System Manual
Article No.
STEP 7 Professional / Basic V13
For SIMATIC S7-1200 and

STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Brief instructions
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
Chinese
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
Windows 7 Professional SP1
(64 bit),
Windows 7 Enterprise SP1 (64 bit),
Windows 7 Ultimate SP1 (64 bit),
Windows 8.1 (64 bit),
Windows 8.1 Professional (64 bit),
Windows 8.1 Enterprise (64 bit),
Windows Server 2008 R2 StdE
(full installation),
Windows Server 2012 StdE
(full installation)
Form of delivery:
German, English, Chinese, Italian,
French, Spanish
STEP 7 Professional V13,

Floating License
6ES7822-1AA03-0YA5
6ES7822-1AE03-0YA5
6ES7298-8FA30-8EQ0

Floating License,
software download
incl. license key1)
6ES7298-8FA30-8KQ0
E-mail address required for delivery

STEP 7 Basic V13, Floating License
6ES7822-0AA03-0YA5
STEP 7 Basic V13,

Floating License,
software download
incl. license key1)
6ES7822-0AE03-0YA5

1)
For up-to-date information and download availability, see:

http://www.siemens.com/tia-online-software-delivery
3/5
Siemens AG 2014
SIMATIC S7-1200
CPU 1212C
Overview
The superior compact solution
Expandable by:
- 2 signal modules (SM)
6ES7212-1BE40-0XB0
Supply voltage
24 V DC
6ES7212-1AE40-0XB0
CPU 1212C DC/DC/DC
6ES7212-1HE40-0XB0
Yes
Yes
120 V AC
Yes
230 V AC
Yes
Encoder supply
24 V encoder supply
24 V
Power losses
Power loss, typ.
11 W
9W
9W
Memory
Work memory
integrated
50 kbyte
50 kbyte
50 kbyte
1 Mbyte
1 Mbyte
1 Mbyte
Backup
without battery
Yes
Yes
Yes

1.7 s; / Operation
1.7 s; / Operation
1.7 s; / Operation
2.3 s; / Operation
2.3 s; / Operation
2.3 s; / Operation

area

area

area
Address area
Process image
Inputs, adjustable
Outputs, adjustable
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
Time of day
Clock
Yes
Yes
Yes
Load memory
integrated
max.

Flag
Number, max.
3/6
Siemens AG 2014
SIMATIC S7-1200
CPU 1212C

6ES7212-1BE40-0XB0
6ES7212-1AE40-0XB0
CPU 1212C DC/DC/DC
6ES7212-1HE40-0XB0
Digital inputs
of which, inputs usable for
technological functions
8; integrated
8; integrated
8; integrated
Digital outputs
6; Relays
6
6; Relays
Analog inputs
2; 0 to 10 V
2; 0 to 10 V
2; 0 to 10 V
Input ranges
Voltage
Yes
Yes
Yes
1st interface
Interface type
PROFINET
PROFINET
PROFINET
Physics
Ethernet
Ethernet
Ethernet
Functionality
PROFINET IO Device
Yes
Yes
Yes
Yes
Yes
Yes
S7 communication
supported
Yes
Yes
Yes
TCP/IP
UDP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Web server
supported
Yes
Yes
Yes
Number of counters
100 kHz
100 kHz
100 kHz
Frequency meter
Yes
Yes
Yes
Yes
Yes
Yes
PID controller
Yes
Yes
Yes
100 kHz
Ambient conditions
Min.
max.
-20 C
60 C
-20 C
60 C
-20 C
60 C
Configuration
programming
- LAD
- FBD
- SCL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
90 mm
90 mm
90 mm
Height
100 mm
100 mm
100 mm
Depth
75 mm
75 mm
75 mm
Weights
Weight, approx.
425 g
370 g
385 g
3/7
Siemens AG 2014
SIMATIC S7-1200
CPU 1212C
Ordering data
Article No.
CPU 1212C
Article No.

85 ... 264 V AC;
expandable by up to
3 communication modules,
2 signal modules and 1 signal
board/communication board;
as HSC at 100 kHz
6ES7212-1BE40-0XB0

2 analog inputs;
expandable by up to
2 signal modules, and 1 signal
as HSC at 100 kHz,
(PWM) at 100 kHz
6ES7212-1AE40-0XB0

expandable by up to
as HSC at 100 kHz
6ES7212-1HE40-0XB0
2 inputs, 24 V DC,
0.5 A, 5 W;
can be used as HSC at
up to 30 kHz
6ES7223-0BD30-0XB0

6ES7223-3AD30-0XB0

6ES7223-3BD30-0XB0
6ES7231-4HA30-0XB0

board
6ES7231-5QA30-0XB0

6ES7231-5PA30-0XB0

6ES7232-4HA30-0XB0

board
6ES7241-1CH30-1XB0

8 input switches,
for CPU 1211C / CPU 1212C
6ES7274-1XF30-0XA0

6ES7221-3AD30-0XB0
6ES7221-3BD30-0XB0

6ES7222-1AD30-0XB0
6ES7222-1BD30-0XB0
4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
24 MB
6ES7954-8LF02-0AA0
2 GB
6ES7954-8LP01-0AA0
Extension cable for two-tier

configuration
6ES7290-6AA30-0XA0
For connecting digital/analog signal

modules; length 2 m
Starter box CPU 1212C
AC/DC/relay
6ES7212-1BD34-4YB0
Complete offer SIMATIC S7-1200,

starter box, comprising:
CPU 1212C AC/DC/relay, simulator,
STEP 7 BASIC CD, manual CD,
info material, in Systainer
For CPU 1211C/1212C
3/8
For DI, with 14 screws, tin-plated;

4 units
6ES7292-1AH30-0XA0
For DO, with 8 screws, tin-plated;

4 units
6ES7292-1AP30-0XA0
For AI, with 3 screws, tin-plated;

4 units
6ES7292-1BC30-0XA0
Siemens AG 2014
SIMATIC S7-1200
CPU 1212C
Ordering data
Article No.
4 items per pack

Single port
6ES7290-3AA30-0XA0

For CPU 1211C/1212C
Article No.
RJ45 cable grip
6ES7291-1AA30-0XA0

System Manual
STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Brief instructions
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish

Floating License
6ES7822-1AA03-0YA5

Floating License,
software download
incl. license key1)
6ES7822-1AE03-0YA5
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
6ES7822-0AA03-0YA5
French
6ES7298-8FA30-8CQ0
6ES7822-0AE03-0YA5
Spanish
6ES7298-8FA30-8DQ0
Italian
6ES7298-8FA30-8EQ0
STEP 7 Basic V13,

Floating License,
software download
incl. license key1)
Chinese
6ES7298-8FA30-8KQ0

1)

3/9
Siemens AG 2014
SIMATIC S7-1200
CPU 1214C
Overview
The compact high-performance CPU
Expandable by:
6ES7214-1BG40-0XB0
Supply voltage
24 V DC
6ES7214-1AG40-0XB0
CPU 1214C DC/DC/DC
6ES7214-1HG40-0XB0
Yes
Yes
120 V AC
Yes
230 V AC
Yes
Encoder supply
24 V encoder supply
24 V
Power losses
Power loss, typ.
14 W
12 W
12 W
Memory
Work memory
integrated
75 kbyte
75 kbyte
75 kbyte
4 Mbyte
4 Mbyte
4 Mbyte
Backup
without battery
Yes
Yes
Yes

1.7 s; / Operation
1.7 s; / Operation
1.7 s; / Operation
2.3 s; / Operation
2.3 s; / Operation
2.3 s; / Operation

area

area

area
Address area
Process image
Inputs, adjustable
Outputs, adjustable
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
Time of day
Clock
Yes
Yes
Yes
Load memory
integrated
max.

Flag
Number, max.
3/10
Siemens AG 2014
SIMATIC S7-1200
CPU 1214C

6ES7214-1BG40-0XB0
6ES7214-1AG40-0XB0
CPU 1214C DC/DC/DC
6ES7214-1HG40-0XB0
Digital inputs
14; integrated
14; integrated
14; integrated
Digital outputs
10; Relays
10
10; Relays
Analog inputs
2; 0 to 10 V
2; 0 to 10 V
2; 0 to 10 V
Input ranges
Voltage
Yes
Yes
Yes
1st interface
Interface type
PROFINET
PROFINET
PROFINET
Physics
Ethernet
Ethernet
Ethernet
Functionality
PROFINET IO Device
Yes
Yes
Yes
Yes
Yes
Yes
S7 communication
supported
Yes
Yes
Yes
TCP/IP
UDP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Web server
supported
Yes
Yes
Yes
Number of counters
100 kHz
100 kHz
100 kHz
Frequency meter
Yes
Yes
Yes
Yes
Yes
Yes
PID controller
Yes
Yes
Yes
100 kHz

Ambient conditions
Min.
max.
-20 C
60 C
-20 C
60 C
-20 C
60 C
Configuration
programming
- LAD
- FBD
- SCL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
110 mm
110 mm
110 mm
Height
100 mm
100 mm
100 mm
Depth
75 mm
75 mm
75 mm
Weights
Weight, approx.
475 g
415 g
435 g
3/11
Siemens AG 2014
SIMATIC S7-1200
CPU 1214C
Ordering data
Article No.
CPU 1214C
Article No.

85 ... 264 V AC;
expandable by up to
as HSC at 100 kHz
6ES7214-1BG40-0XB0

2 analog inputs;
expandable by up to
as HSC at 100 kHz,
(PWM) at 100 kHz
6ES7214-1AG40-0XB0

expandable by up to
as HSC at 100 kHz
6ES7214-1HG40-0XB0
2 inputs, 24 V DC,
0.5 A, 5 W;
can be used as HSC
at up to 30 kHz
6ES7223-0BD30-0XB0

6ES7223-3AD30-0XB0

6ES7223-3BD30-0XB0
6ES7231-4HA30-0XB0

board
6ES7231-5QA30-0XB0

6ES7231-5PA30-0XB0

6ES7232-4HA30-0XB0

board
6ES7241-1CH30-1XB0

14 input switches, for CPU 1214C
6ES7274-1XH30-0XA0

6ES7221-3AD30-0XB0
6ES7221-3BD30-0XB0
4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
24 MB
6ES7954-8LF02-0AA0
2 GB
6ES7954-8LP01-0AA0

configuration
6ES7290-6AA30-0XA0

modules; length 2 m
For CPU 1214C
6ES7222-1AD30-0XB0
6ES7222-1BD30-0XB0

4 units
6ES7292-1AV30-0XA0

4 units
6ES7292-1AM30-0XA0
For AI, with 3 screws, tin-plated;

4 units
6ES7292-1BC30-0XA0
RJ45 cable grip

4 items per pack
Single port
6ES7290-3AA30-0XA0

For CPU 1214C
3/12
6ES7291-1AB30-0XA0
Siemens AG 2014
SIMATIC S7-1200
CPU 1214C
Ordering data
Article No.

System Manual
Article No.

STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Brief instructions
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
Chinese
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish

Floating License
6ES7822-1AA03-0YA5
6ES7822-1AE03-0YA5
6ES7298-8FA30-8EQ0

Floating License,
software download
incl. license key1)
6ES7298-8FA30-8KQ0

6ES7822-0AA03-0YA5
STEP 7 Basic V13,

Floating License,
software download
incl. license key1)
6ES7822-0AE03-0YA5

1)

3/13
Siemens AG 2014
SIMATIC S7-1200
CPU 1215C
Overview
Expandable by:
6ES7215-1BG40-0XB0
Supply voltage
24 V DC
6ES7215-1AG40-0XB0
CPU 1215C DC/DC/DC
6ES7215-1HG40-0XB0
Yes
Yes
120 V AC
Yes
230 V AC
Yes
Encoder supply
24 V encoder supply
24 V
Power losses
Power loss, typ.
14 W
12 W
12 W
Memory
Work memory
integrated
100 kbyte
100 kbyte
100 kbyte
4 Mbyte
4 Mbyte
4 Mbyte
Backup
without battery
Yes
Yes
Yes

1.7 s; / Operation
1.7 s; / Operation
1.7 s; / Operation
2.3 s; / Operation
2.3 s; / Operation
2.3 s; / Operation

area

area

area
Address area
Process image
Inputs, adjustable
Outputs, adjustable
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
1 kbyte
Time of day
Clock
Yes
Yes
Yes
Load memory
integrated
max.

Flag
Number, max.
3/14
Siemens AG 2014
SIMATIC S7-1200
CPU 1215C

6ES7215-1BG40-0XB0
6ES7215-1AG40-0XB0
CPU 1215C DC/DC/DC
6ES7215-1HG40-0XB0
Digital inputs
14; integrated
14; integrated
14; integrated
Digital outputs
10; Relays
10
10; Relays
Analog inputs
2; 0 to 10 V
2; 0 to 10 V
2; 0 to 10 V
Input ranges
Voltage
Yes
Yes
Yes
Analog outputs
Integrated channels (AO)
2; 0 to 20mA
2; 0 to 20mA
2; 0 to 20mA
1st interface
Interface type
PROFINET
PROFINET
PROFINET
Functionality
PROFINET IO Device
Yes
Yes
Yes
Yes
Yes
Yes
S7 communication
supported
Yes
Yes
Yes
TCP/IP
UDP
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Web server
supported
Yes
Yes
Yes
Number of counters
100 kHz
100 kHz
100 kHz
Frequency meter
Yes
Yes
Yes
Yes
Yes
Yes
PID controller
Yes
Yes
Yes
100 kHz
Ambient conditions
Min.
max.
-20 C
60 C
-20 C
60 C
-20 C
60 C
Configuration
programming
- LAD
- FBD
- SCL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
130 mm
130 mm
130 mm
Height
100 mm
100 mm
100 mm
Depth
75 mm
75 mm
75 mm
Weights
Weight, approx.
585 g
520 g
550 g
3/15
Siemens AG 2014
SIMATIC S7-1200
CPU 1215C
Ordering data
Article No.
CPU 1215C
Article No.

85 ... 264 V AC;
(relays), 2 analog inputs,
2 analog outputs;
expandable by up to
as HSC at 100 kHz
6ES7215-1BG40-0XB0

2 analog inputs, 2 analog outputs;
expandable by up to
as HSC at 100 kHz,
(PWM) at 100 kHz
6ES7215-1AG40-0XB0

(relays), 2 analog inputs,
2 analog outputs;
expandable by up to
as HSC at 100 kHz
6ES7215-1HG40-0XB0
2 inputs, 24 V DC,
0.5 A, 5 W;
can be used as HSC
at up to 30 kHz
6ES7223-0BD30-0XB0

6ES7223-3AD30-0XB0

6ES7223-3BD30-0XB0
6ES7231-4HA30-0XB0

board
6ES7231-5QA30-0XB0

RTD signal board SB 1231
6ES7231-5PA30-0XB0

6ES7232-4HA30-0XB0

board
6ES7241-1CH30-1XB0

BB 1297 battery board
6ES7297-0AX30-0XA0
For long-term backup of real-time

clock; can be plugged into the
signal board slot of an S7-1200
CPU in FW version 3.0 or higher;
battery (CR 1025) is not included
14 input switches, for CPU 1214C
and CPU 1215C
6ES7274-1XH30-0XA0
4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
6ES7221-3AD30-0XB0
24 MB
6ES7954-8LF02-0AA0
6ES7221-3BD30-0XB0
2 GB
6ES7954-8LP01-0AA0

configuration
6ES7290-6AA30-0XA0

6ES7222-1AD30-0XB0
6ES7222-1BD30-0XB0

modules;
length 2 m
For CPU 1215C
3/16

4 units
6ES7292-1AV30-0XA0

4 units
6ES7292-1AM30-0XA0
For analog units, with 6 screws,

gold-plated; 4 units
6ES7292-1BF30-0XB0
Siemens AG 2014
SIMATIC S7-1200
CPU 1215C
Ordering data
Article No.
For CPU 1215C
Article No.

6ES7291-1AC30-0XA0
RJ45 cable grip

4 items per pack
Single port
6ES7290-3AA30-0XA0
Dual port
6ES7290-3AB30-0XA0

System Manual
For SIMATIC S7-1200
and STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish

Floating License
6ES7822-1AA03-0YA5

Floating License,
software download
incl. license key1)
6ES7822-1AE03-0YA5
Brief instructions
German
6ES7298-8FA30-8AQ0
6ES7822-0AA03-0YA5
English
6ES7298-8FA30-8BQ0
6ES7822-0AE03-0YA5
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
STEP 7 Basic V13,

Floating License,
software download
incl. license key1)
Italian
6ES7298-8FA30-8EQ0
Chinese
6ES7298-8FA30-8KQ0
1)

3/17
Siemens AG 2014
SIMATIC S7-1200
CPU 1217C
Overview

With 24 integrated I/Os
Expandable by:
- 1 Signal Board (SB) or Communication Board (CB)
6ES7217-1AG40-0XB0
CPU 1217C DC/DC/DC
Analog inputs
2; 0 to 10 V
Input ranges
Voltage
Yes
Analog outputs
Integrated channels (AO)
2; 0 to 20 mA
1st interface
Interface type
PROFINET
6ES7217-1AG40-0XB0
CPU 1217C DC/DC/DC
Supply voltage
24 V DC
Functionality
PROFINET IO Device
Yes
Yes
Yes
Encoder supply
24 V encoder supply
24 V
S7 communication
supported
Yes
Power losses
Power loss, typ.
12 W
Memory
Work memory
integrated
TCP/IP
UDP
Yes
Yes
Yes
125 kbyte
Web server
supported
Yes
Number of counters
1 MHz
Frequency meter
Yes
Yes
PID controller
Yes
1.7 s; / Operation
2.3 s; / Operation
1 MHz

area
Ambient conditions
Min.
max.
-20 C
60 C
Configuration
programming
- LAD
- FBD
- SCL
Yes
Yes
Yes
Load memory
integrated
max.
Backup
without battery
Flag
Number, max.
4 Mbyte
Yes
Address area
Process image
Inputs, adjustable
Outputs, adjustable
1 kbyte
1 kbyte
Time of day
Clock
Yes
Dimensions
Width
150 mm
14; integrated
Height
100 mm
Depth
75 mm
Weights
Weight, approx.
530 g
Digital inputs
Digital outputs
3/18
10
4; 1 MHz Pulse Train Output
Siemens AG 2014
SIMATIC S7-1200
CPU 1217C
Ordering data
Article No.
CPU 1217C
14 digital inputs (10 digital 24 V DC
inputs, 4 digital 1.5 V DC differential
inputs), 10 digital outputs (6 digital
24 V DC outputs, 4 digital 1.5 V DC
differential outputs), 2 analog
inputs, 2 analog outputs;
expandable by up to
8 signal modules, and 1 Signal
Board/Communication Board;
as HSC at 1 MHz,
(PWM) at 100 kHz

6ES7217-1AG40-0XB0
BB 1297 battery board
6ES7297-0AX30-0XA0
For long-term backup of real-time

clock; can be plugged into the
signal board slot of an S7-1200
CPU in FW version 3.0 or higher;
battery (CR 1025) is not included
Digital, 14 input switches,
for CPU 1217C
6ES7274-1XK30-0XA0
Analog, 2 potentiometer inputs
6ES7274-1XA30-0XA0

4 MB
6ES7954-8LC02-0AA0
6ES7221-3AD30-0XB0
12 MB
6ES7954-8LE02-0AA0
6ES7221-3BD30-0XB0
24 MB
6ES7954-8LF02-0AA0
2 GB
6ES7954-8LP01-0AA0

configuration
6ES7290-6AA30-0XA0
6ES7222-1AD30-0XB0
6ES7222-1BD30-0XB0

2 inputs, 24 V DC,
0.5 A, 5 W;
can be used as HSC
at up to 30 kHz
6ES7223-0BD30-0XB0

6ES7223-3AD30-0XB0

6ES7223-3BD30-0XB0
6ES7231-4HA30-0XB0

modules;
length 2 m
For CPU 1217C


4 units
6ES7292-1AK30-0XA0

4 units
6ES7292-1AR30-0XA0

4 units
6ES7292-1AT30-0XA0
For analog units, with 6 screws,

gold-plated; 4 units
6ES7292-1BF30-0XB0
RJ45 cable grip

6ES7231-5QA30-0XB0
4 items per pack

Dual port

6ES7241-1CH30-1XB0


board
6ES7232-4HA30-0XB0

board

Article No.
6ES7290-3AB30-0XA0
6ES7231-5PA30-0XB0

3/19
Siemens AG 2014
SIMATIC S7-1200
CPU 1217C
Ordering data
Article No.

System Manual
For SIMATIC S7-1200
and STEP 7 Basic
Article No.
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Brief instructions
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
Chinese
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish
Floating License
6ES7822-1AA03-0YA5
6ES7822-1AE03-0YA5
6ES7298-8FA30-8EQ0

Floating License,
software download
incl. license key1)
6ES7298-8FA30-8KQ0

6ES7822-0AA03-0YA5
STEP 7 Basic V13,

Floating License,
software download
incl. license key1)
6ES7822-0AE03-0YA5

1)
3/20

Siemens AG 2014
SIMATIC S7-1200
Overview
Digital inputs as supplement to the integral I/O of the CPUs
For flexible adaptation of the controller to the corresponding
task
For subsequent expansion of the system with additional inputs
From +60 C to +70 C, max. 50% of the inputs can be
controlled simultaneously
Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific information was added.
The technical data correspond to those of the based-on modules apart from the values listed in the table:
Based on
Ambient conditions
Extended ambient conditions
Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, tested in
accordance with IEC 60068-2-38,
maximum
Resistance
- to biologically active
substances/conformity with
EN 60721-3-3
- to chemically active
EN 60721-3-3
- to mechanically active
EN 60721-3-3
6AG1221-1BF32-2XB0
SM 1221 DI 8x24 VDC
6AG1221-1BF32-4XB0
SM 1221 DI 8x24 VDC
6AG1221-1BH32-2XB0
SM 1221 DI 16x24 VDC
6AG1221-1BH32-4XB0
SM 1221 DI 16x24 VDC
6ES7221-1BF32-0XB0
6ES7221-1BF32-0XB0
6ES7221-1BH32-0XB0
6ES7221-1BH32-0XB0
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna).
The supplied connector covers must remain on the unused interfaces during operation!
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3).
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Climatic and mechanical conditions

for storage and transport
Climatic conditions for storage and
transport
Free fall
- Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
- Permissible temperature range
-40 C to +70 C
Mechanical and climatic conditions
during operation
Climatic conditions in operation
Temperature
- Min.
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
- max.
70 C; = Tmax;
60 C; = Tmax
Tmax > +60 C number of
simultaneously activated
inputs 4 (no adjacent points)
for horizontal mounting
position
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
70 C; = Tmax;
60 C; = Tmax
inputs 8 (no adjacent points)
position
3/21
Siemens AG 2014
SIMATIC S7-1200
Ordering data
Article No.
Digital input SIPLUS SM 1221

signal module
Accessories
(extended temperature range and

medial exposure)
8 inputs, 24 V DC, isolated,

current sourcing/sinking
Suitable for areas with
extraordinary medial exposure
(conformal coating)
-25 ... +70 C,
from +60 +70 C number of
simultaneously controllable inputs
and outputs max. 50 %
current sourcing/sinking
(conformal coating)
-25 ... +70 C,
3/22
Article No.
6AG1221-1BF32-4XB0
6AG1221-1BF32-2XB0
6AG1221-1BH32-4XB0
6AG1221-1BH32-2XB0
See SIMATIC S7-1200

SM 1221 digital input,
catalog ST 70 2013, page 3/42
Siemens AG 2014
SIMATIC S7-1200
Overview
Digital outputs as a supplement to the integral I/O of the CPUs
task
For subsequent expansion of the system with additional
outputs
Note:
Based on
6AG1222-1BF32-2XB0
SM 1222 DQ 8x24 VDC
6AG1222-1BF32-4XB0
SM 1222 DQ 8x24 VDC
6AG1222-1BH32-2XB0
SM 1222 DQ 16x24 VDC
6AG1222-1BH32-4XB0
SM 1222 DQ 16x24 VDC
6ES7222-1BF32-0XB0
6ES7222-1BF32-0XB0
6ES7222-1BH32-0XB0
6ES7222-1BH32-0XB0
Ambient conditions
Relative to ambient temperatureTmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa
atmospheric pressure-installation
altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3

transport
Free fall
Temperature
-40 C to +70 C
during operation
Temperature
- Min.
-40 C; = Tmin;
startup @ -25 C
- max.
70 C; = Tmax;
outputs 4 (no adjacent
points) for horizontal
mounting position
-20 C; = Tmin;
startup @ 0 C
60 C; = Tmax
-40 C; = Tmin;
startup @ -25 C
70 C; = Tmax;
mounting position
-20 C; = Tmin;
startup @ 0 C
60 C; = Tmax
3/23
Siemens AG 2014
SIMATIC S7-1200

Based on
6AG1222-1HF32-2XB0
SM 1222 DQ 8xRelay
6AG1222-1HF32-4XB0
SM 1222 DQ 8xRelay
6AG1222-1HH32-2XB0
SM 1222 DQ 16xRelay
6AG1222-1HH32-4XB0
SM 1222 DQ 16xRelay
6ES7222-1HF32-0XB0
6ES7222-1HF32-0XB0
6ES7222-1HH32-0XB0
6ES7222-1HH32-0XB0
Ambient conditions

altitude
at cold restart, minimum
Relative humidity
- with condensation, maximum

maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
-25 C
100 %; RH incl. condensation/frost (no commissioning under condensation
conditions)

transport
Free fall
Temperature
-40 C to +70 C

during operation
Temperature
- Min.
-40 C; = Tmin;
startup @ -25 C
70 C; = Tmax;
- max.
mounting position
- Permissible temperature change 5C to 55C, 3C / minute
Ordering data
(Extended temperature range and
medial exposure)
16 outputs, 24 V DC; 0.5 A, 5 W,

isolated
(conformal coating)
-25 ... +70 C,
from +60 +70C number of
3/24
-40 C; = Tmin;
startup @ -25 C
70 C; = Tmax;
mounting position
Article No.
Digital output SIPLUS SM 1222

signal module
8 outputs, 24 V DC; 0.5 A, 5 W,

isolated
(conformal coating)
-25 ... +70 C,
-20 C; = Tmin;
startup @ 0 C
60 C; = Tmax
6AG1222-1BF32-4XB0
6AG1222-1BF32-2XB0
6AG1222-1BH32-4XB0
6AG1222-1BH32-2XB0
-20 C; = Tmin;
startup @ 0 C
60 C; = Tmax
Article No.
8 outputs, 5 ... 30 V DC/
5 ... 250 V AC, relay 2 A,
30 W DC/200 W AC
(conformal coating)
-25 ... +70 C,
16 outputs, 5 ... 30 V DC/
5 ... 250 V AC, relay 2 A,
30 W DC/200 W AC
(conformal coating)
-25 ... +70 C,
Accessories
6AG1222-1HF32-4XB0
6AG1222-1HF32-2XB0
6AG1222-1HH32-4XB0
6AG1222-1HH32-2XB0
See SIMATIC S7-1200

SM 1222 digital output,
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1223 digital input/output modules
Overview
Digital inputs and outputs as supplement to the integral I/O of
the CPUs
task
and outputs
Note:
The technical data correspond to those of the based-on modules apart from the values listed in the table.
Based on
6AG1223-1BH32-2XB0
SM 1223 DI 8x24 VDC,
DQ 8x24 VDC
6AG1223-1BH32-4XB0
DQ 8x24 VDC
6AG1223-1PH32-2XB0
DQ 8xRelay
6AG1223-1PH32-4XB0
DQ 8xRelay
6ES7223-1BH32-0XB0
6ES7223-1BH32-0XB0
6ES7223-1PH32-0XB0
6ES7223-1PH32-0XB0
Ambient conditions
altitude
Relative humidity

accordance with
IEC 60068-2-38, maximum
Resistance
substances/conformity wit
h EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
-25 C
conditions)

transport
Free fall
Temperature
-40 C to +70 C

during operation
Temperature
- Min.
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
- max.
70 C; = Tmax;
60 C; = Tmax
outputs 4, inputs 4 (no
adjacent points) for
horizontal mounting position
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
70 C; = Tmax;
60 C; = Tmax
3/25
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1223 digital input/output modules
Based on
Ambient conditions
altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
6AG1223-1PL32-2XB0
SM 1223 DI 16x24 VDC,
DQ 16xRelay
6AG1223-1PL32-4XB0
SM 1223 DI 16x24 VDC,
DQ 16xRelay
6AG1223-1BL32-2XB0
SM 1223 DI 16x24 VDC,
DQ 16x24 VDC
6AG1223-1BL32-4XB0
SM 1223 DI 16x24 VDC,
DQ 16x24 VDC
6ES7223-1PL32-0XB0
6ES7223-1PL32-0XB0
6ES7223-1BL32-0XB0
6ES7223-1BL32-0XB0

transport
Free fall
Temperature
-40 C to +70 C

during operation
Temperature
- Min.
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
70 C; = Tmax;
60 C; = Tmax
- max.
Ordering data
Article No.
Digital input/output SIPLUS

SM 1223 signal module
medial exposure)
8 inputs, 24 V DC,
IEC type 1 current sinking
8 transistor outputs,
24 V DC, 0.5 A, 5 W
(conformal coating)
-25 ... +70 C,
16 inputs, 24 V DC,
16 transistor outputs,
24 V DC, 0.5 A, 5 W
(conformal coating)
-25 ... +70 C,
3/26
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
70 C; = Tmax;
60 C; = Tmax
6AG1223-1BH32-4XB0
6AG1223-1BH32-2XB0
6AG1223-1BL32-4XB0
6AG1223-1BL32-2XB0
Article No.
8 inputs, 24 V DC,
8 relay outputs, 5 ... 30 V DC /
5 ... 250 V AC, 2 A, 30 W DC /
200 W AC
(conformal coating)
-25 ... +70 C,
16 inputs, 24 V DC,
16 relay outputs, 5 ... 30 V DC /
5 ... 250 V AC, 2 A, 30 W DC /
200 W AC
(conformal coating)
-25 ... +70 C,
Accessories
6AG1223-1PH32-4XB0
6AG1223-1PH32-2XB0
6AG1223-1PL32-4XB0
6AG1223-1PL32-2XB0
See SIMATIC S7-1200

SM 1223 digital input/output,
Siemens AG 2014
SIMATIC S7-1200
Analog modules
Overview
For the convenient recording of temperatures with great
accuracy
7 common thermocouple types can be used
Also for the measurement of analog signals with a low level
(80 mV)
Can easily be retrofitted to existing plant
Supply voltage
24 V DC
6ES7231-5QD32-0XB0
SM 1231 TC 4x16 bit
6ES7231-5QF32-0XB0
SM 1231 TC 8x16bit
Yes
Yes
Input current
Current consumption, typ. 40 mA
from backplane bus 5 V
DC, typ.
Power losses
Power loss, typ.
Analog inputs
Number of analog inputs
80 mA
1.5 W
1.5 W
4; Thermocouples
35 V
permissible input
frequency for current input
(destruction limit), max.
Technical unit for temperature measurement
adjustable
Input ranges
Thermocouple
Input ranges (rated

values), voltages
-80 mV to +80 mV
Input resistance
(-80 mV to +80 mV)
Input ranges (rated
values), thermoelements
Type B
Type C
Type E
Type J
Type K
Type N
Type R
Type S
Type T
Type TXK/TXK(L) to
GOST
40 mA
80 mA
4; Thermocouples
35 V
Degrees
Celsius/degrees
Fahrenheit
Degrees
Celsius/degrees
Fahrenheit
Yes; J, K, T, E, R, S, N,
C, TXK/XK(L); voltage
range: +/-80 mV
Yes; J, K, T, E, R & S, B,
N, C, TXK/XK(L);
voltage range: 80 mV
Yes
>= 1 MOhm
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Thermocouple (TC)
permissible input voltage +-35 V
for voltage input
Temperature compensation
- Parameterizable
No
Yes
>= 1 MOhm
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
+-35 V
No
6ES7231-5QD32-0XB0
SM 1231 TC 4x16 bit
6ES7231-5QF32-0XB0
SM 1231 TC 8x16bit
Analog outputs
Number of analog outputs 0
Analog value creation

Measurement principle
integrating
integrating
15 bit; + sign
15 bit; + sign
No
No
85 dB at
50 / 60 / 400 Hz
85 dB at
50 / 60 / 400 Hz
Integrations and
conversion time/resolution
per channel
Resolution with
overrange (bit including
sign), max.
Integration time, parameterizable
Interference voltage
suppression for interference frequency f1 in
Hz
Analog value generation

(in isochronous mode)
Smoothing of measured
values
Parameterizable
Yes
Yes
Errors/accuracies
Repeat accuracy in steady 0.5 %
state at 25 C (relative to
output area), (+/-)
0.5 %
suppression for f = n x (f1
+/- 1 %), f1 = interference
frequency
Common mode inter120 dB
ference, min.
120 dB
Interrupts/diagnostics/status
information
Alarms
Alarms
Yes
Diagnostic alarm
Yes
Diagnostic messages
Diagnostic functions
Monitoring the supply
voltage
Wire break
Yes
Yes
Yes; Can be read out

Yes

Yes
Yes
Yes
Diagnostics indication
LED
for status of the inputs
for maintenance
Yes
Yes
Yes
Yes
Degree and class of

protection
IP20
Yes
Yes
Standards, approvals,
certificates
CE mark
Yes
Yes
RCM (former C-TICK)
Yes
Yes
FM approval
Yes
Yes
Highest safety class

achievable in safety mode
acc. to IEC 61508
none
none
3/27
Siemens AG 2014
SIMATIC S7-1200
Analog modules

6ES7231-5QD32-0XB0
SM 1231 TC 4x16 bit
Climatic and mechanical

conditions for storage
and transport
Climatic conditions for
storage and transport
Free fall
- Drop height, max
. (in packaging)
Temperature
- Permissible
temperature range
Air pressure acc. to
IEC 60068-2-13
- Permissible air
pressure
Relative humidity
- Permissible range
(without condensation)
at 25 C
0.3 m; five times, in

dispatch package

dispatch package
-40 C to +70 C
-40 C to +70 C
1080 to 660 hPa
1080 to 660 hPa
95 %
95 %
SM 1231 thermocouple module

4 inputs +/- 80 mV, resolution
15 bits + sign, thermocouple types
J, K, S, T, R, E, N
6ES7231-5QD32-0XB0
8 inputs +/- 80 mV, resolution

15 bits + sign, thermocouple types
J, K, T, E, R, S, N, C, TXK/XK(L)
6ES7231-5QF32-0XB0
Accessories
For 8/16-channel signal modules
6ES7291-1BA30-0XA0
Yes
1080 to 795 hPa
S02: < 0.5 ppm; H2S:

< 0.1 ppm; RH < 60%
condensation-free
Yes
Yes
Yes
Dimensions
Width
45 mm
45 mm
Height
100 mm
100 mm
Depth
75 mm
75 mm
Weights
Weight, approx.
180 g
220 g
For SIMATIC S7-1200

and STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Mechanics/material
Type of housing (front)
Plastic
3/28
Article No.

System Manual
Mechanical and climatic

conditions during
operation
Climatic conditions
in operation
IEC 60068-2-13
- Permissible air
1080 to 795 hPa
pressure
Pollutant concentrations
- SO2 at RH < 60%
S02: < 0.5 ppm; H2S:
without condensation < 0.1 ppm; RH < 60%
condensation-free
Connection method
required front connector
Ordering data
6ES7231-5QF32-0XB0
SM 1231 TC 8x16bit
Brief instructions
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
6ES7298-8FA30-8EQ0
Chinese
6ES7298-8FA30-8KQ0
Siemens AG 2014
SIMATIC S7-1200
Analog modules
Overview
accuracy
4 inputs
Most popular resistance temperature detectors can be used
Can easily be retrofitted to existing installation
6ES7231-5PD32-0XB0
SM 1231 RTD 4x16bit
6ES7231-5PF32-0XB0
SM 1231 RTD 8x16bit
Supply voltage
24 V DC
Yes
Yes
Input current
Current consumption, typ.
40 mA
40 mA
from backplane bus 5 V DC, typ.
80 mA
80 mA
Power losses
Power loss, typ.
1.5 W
1.5 W
Analog inputs
4; Resistance thermometer
8; Resistance thermometer
permissible input frequency for current input

35 V
35 V
Technical unit for temperature measurement

adjustable
Degrees Celsius/degrees Fahrenheit
Degrees Celsius/degrees Fahrenheit
Resistance
Yes; Resistance-type transmitter: Pt10, Pt50, Pt100,

Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500,
Ni1000, Cu10, Cu50, Cu100, LG-Ni1000
Yes; 150 , 300 , 600
Yes; Resistance-type transmitter: Pt10, Pt50, Pt100,

Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500,
Ni1000, Cu10, Cu50, Cu100, LG-Ni1000
Yes; 150 , 300 , 600
Input ranges (rated values),

resistance thermometers
Cu 10
Input resistance (Cu 10)
Ni 100
Input resistance (Ni 100)
Ni 1000
LG-Ni 1000
Input resistance (LG-Ni 1000)
Ni 120
Ni 200
Ni 500
Pt 100
Input resistance (Pt 100)
Pt 1000
Pt 200
Pt 500
Yes
10
Yes
100
Yes
1 000
Yes
1 000
Yes
120
Yes
200
Yes
500
Yes
100
Yes
1 000
Yes
200
Yes
500
Yes
10
Yes
100
Yes
1 000
Yes
1 000
Yes
120
Yes
200
Yes
500
Yes
100
Yes
1 000
Yes
200
Yes
500
Input ranges (rated values), resistors

0 to 150 ohms
0 to 300 ohms
0 to 600 ohms
Yes
Yes
Yes
Yes
Yes
Yes
Thermocouple (TC)
- Parameterizable
No
No
Input ranges
Resistance thermometer
3/29
Siemens AG 2014
SIMATIC S7-1200
Analog modules
6ES7231-5PD32-0XB0
SM 1231 RTD 4x16bit
6ES7231-5PF32-0XB0
SM 1231 RTD 8x16bit
Analog outputs
Number of analog outputs

integrating
integrating
Integrations and conversion time/resolution per

channel
Resolution with overrange (bit including sign), max. 15 bit; + sign
No
Interference voltage suppression for interference 85 dB at 50 / 60 / 400 Hz
frequency f1 in Hz
Errors/accuracies
Repeat accuracy in steady state at 25 C
(relative to output area), (+/-)
15 bit; + sign
No
85 dB at 50 / 60 / 400 Hz
0.05 %
0.05 %
Interference voltage suppression for

f = n x (f1 +/- 1 %), f1 = interference frequency
Common mode interference, min.
120 dB
120 dB
Interrupts/diagnostics/status information
Alarms
Alarms
Diagnostic alarm
Yes
Yes
Yes
Yes
Diagnostic messages
Monitoring the supply voltage
Wire break

Yes
Yes

Yes
Yes
Diagnostics indication LED

for status of the inputs
for maintenance
Yes
Yes
Yes
Yes
Degree and class of protection

IP20
Yes
Yes
Standards, approvals, certificates

CE mark
Yes
Yes
RCM (former C-TICK)
Yes
Yes
FM approval
Yes
Yes
Highest safety class achievable in safety mode

acc. to IEC 61508
none
none
0.3 m; five times, in dispatch package
-40 C to +70 C
-40 C to +70 C
1080 to 660 hPa
1080 to 660 hPa
95 %
95 %
1080 to 795 hPa
1080 to 795 hPa
S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60%
condensation-free
S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60%
condensation-free
Climatic and mechanical conditions for storage

and transport
Climatic conditions for storage and transport
Free fall
- Drop height, max. (in packaging)
Temperature
Air pressure acc. to IEC 60068-2-13
- Permissible air pressure
Relative humidity
- Permissible range (without condensation)
at 25 C
Mechanical and climatic conditions during
operation
Pollutant concentrations
- SO2 at RH < 60% without condensation
3/30
Siemens AG 2014
SIMATIC S7-1200
Analog modules

6ES7231-5PD32-0XB0
SM 1231 RTD 4x16bit
6ES7231-5PF32-0XB0
SM 1231 RTD 8x16bit
Connection method
required front connector
Yes
Yes
Mechanics/material
Plastic
Yes
Yes
Dimensions
Width
45 mm
70 mm
Height
100 mm
100 mm
Depth
75 mm
75 mm
Weights
Weight, approx.
220 g
220 g
Ordering data
Article No.
SM 1231 RTD signal module

4 inputs for resistance
temperature detectors
Pt10/50/100/200/500/1000,
Ni100/120/200/500/1000,
Cu10/50/100, LG-Ni1000;
resistance 150/300/600 Ohm,
resolution 15 bits + sign
6ES7231-5PD32-0XB0

Pt10/50/100/200/500/1000,
Ni100/120/200/500/1000,
Cu10/50/100, LG-Ni1000;
resolution 15 bits + sign
6ES7231-5PF32-0XB0
Article No.
System Manual
For SIMATIC S7-1200
and STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Accessories
Brief instructions

For 8/16-channel signal modules
6ES7291-1BA30-0XA0
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
6ES7298-8FA30-8EQ0
Chinese
6ES7298-8FA30-8KQ0
3/31
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1231 analog input modules
Overview
The technical data correspond to those of the based-on
modules apart from the values listed in the table.
6AG1231-4HD32-4XB0
SM 1231 AI 4x13 bit
Based on
Ambient conditions
altitude
Analog inputs for SIPLUS S7-1200

With extremely short conversion times
For connecting analog actuators and sensors without
additional amplifiers
Even solves more complex automation tasks
From +60C to +70C, max. 50% of the inputs can be
Note:
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
6ES7231-4HD32-0XB0
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
100 %; RH incl. condensation/frost
(no commissioning under condensation conditions)
Yes; Class 3B2 mold, fungus and dry
rot spores (with the exception of
fauna). The supplied connector
covers must remain on the unused
interfaces during operation!
Yes; Class 3C4 (RH < 75%) incl. salt
spray according to EN 60068-2-52
(degree of severity 3). The supplied
connector covers must remain on the
unused interfaces during operation!
Yes; Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!

transport
Free fall
- Drop height, max. (in packaging) 0.3 m; five times, in dispatch
package
Temperature
-40 C to +70 C
during operation
Temperature
- Min.
-20 C; = Tmin; startup @ 0 C
- max.
60 C; = Tmax
Ordering data
Article No.
SIPLUS SM 1231 analog input

signal module
medial exposure)
Ambient temperature range
0 ... +55 C
3/32
4 analog inputs 10 V, 5 V, 2.5 V,

or 0 ... 20 mA; 12 bits + sign
6AG1231-4HD32-4XB0
Accessories
See SIMATIC S7-1200

SM 1231 analog input,
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1232 analog output modules
Overview
6AG1232-4HB32-4XB0
SM 1232 AQ 2x14 bit
Based on
6ES7232-4HB32-0XB0
Ambient conditions
altitude
Analog outputs for SIPLUS S7-1200

For connecting analog actuators without additional amplifiers
From +60 C to +70 C, max. 50% of the outputs can be
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
Note:
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
EN 60721-3-3

during operation!

transport
Free fall
package
Temperature
-40 C to +70 C
during operation
Temperature
- Min.
-20 C; = Tmin; startup @ 0 C
- max.
60 C; = Tmax
Ordering data
Article No.
SIPLUS SM 1232 analog output

signal modules
medial exposure)
0 ... +55 C
2 analog outputs, 10 V with
14 bits or 0 ... 20 mA with 13 bits
6AG1232-4HB32-4XB0
Accessories
See SIMATIC S7-1200

SM 1232 analog output,
3/33
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1234 analog input/output modules
Overview
6AG1234-4HE32-2XB0
SM 1234 A I4x13 bit
AQ 2x14 bit
Based on
6AG1234-4HE32-4XB0
SM 1234 A I4x13 bit
AQ 2x14 bit
6ES7234-4HE32-0XB0 6ES7234-4HE32-0XB0

conditions for storage
and transport
Climatic conditions for
storage and transport
Free fall
- Drop height, max.
(in packaging)
Temperature
- Permissible
temperature range
Analog inputs and outputs for SIPLUS S7-1200

For connecting analog actuators and sensors without
additional amplifiers
From +60 C to +70 C, max. 50% of the inputs and outputs
can be controlled simultaneously

conditions during
operation
Climatic conditions in
operation
Temperature
- Min.
-40 C; = Tmin;
-20 C; = Tmin;
startup @ -25 C
startup @ 0 C
70 C; = Tmax;
60 C; = Tmax
- max.
Tmax > +60 C number
of simultaneously used
outputs 1, inputs 2
(no adjacent points)
position
Ordering data
Note:
6AG1234-4HE32-2XB0
SM 1234 A I4x13 bit
AQ 2x14 bit
Based on
6AG1234-4HE32-4XB0
SM 1234 A I4x13 bit
AQ 2x14 bit
6ES7234-4HE32-0XB0 6ES7234-4HE32-0XB0
Ambient conditions
Extended ambient
conditions
Relative to ambient
temperatureatmospheric pressureinstallation altitude
Relative humidity
- With condensation,
tested in accordance
with IEC 60068-2-38,
maximum
Resistance
substances/conformity
with EN 60721-3-3
Tmin ... Tmax at 1080 hPa ... 795 hPa

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa (+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Yes; Class 3B2 mold, fungus and dry rot spores

(with the exception of fauna). The supplied
connector covers must remain on the unused
Yes; Class 3C4 (RH < 75%) incl. salt spray
substances/conformity according to EN 60068-2-52 (degree of severity
with EN 60721-3-3
3). The supplied connector covers must remain
on the unused interfaces during operation!
- to mechanically active Yes; Class 3S4 incl. sand, dust. The supplied
substances/conformity connector covers must remain on the unused
with EN 60721-3-3
3/34
-40 C to +70 C
Article No.
SIPLUS SM 1234 analog

input/output signal modules
medial exposure)
-25 ... +70 C,
and outputs max. 50%
4 analog inputs, 10 V, 5 V, 2.5 V,
or 0 ... 20 mA, 12 bits + sign;
2 analog outputs, 10 V with 14 bits
6AG1234-4HE32-2XB0

0 ... +55 C
4 analog inputs, 10 V, 5 V,
2.5 V, or 0 ... 20 mA,
12 bits + sign;
2 analog outputs, 10 V with 14 bits
6AG1234-4HE32-4XB0
Accessories
See SIMATIC S7-1200

SM 1234 analog input/output,
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1231 thermocouple modules
Overview
Ordering data

accuracy
7 common thermocouple types can be used
Also for the measurement of analog signals with a low level
(80 mV)
Note:
respective standard products. SIPLUS extreme specific information was added.
Article No.
SM 1231 thermocouple module

medial exposure)
-40 ... +70 C
8 inputs +/- 80 mV,
resolution 15 bits + sign,
thermocouple types J, K, T, E, R, S,
N, C, TXK/XK(L);
replaces 6AG1231-5QF30-4XB0
On request
4 inputs +/- 80 mV,

resolution 15 bits + sign,
thermocouple types J, K, T, E, R, S,
N, C, TXK/XK(L);
replaces 6AG1231-5QD30-4XB0
On request
Accessories
See SIMATIC S7-1200 SM 1231

thermocouple module,
6AG1231-5QD...
6AG1231-5QF...
SM 1231 TC 4x16 bit SM 1231 TC 8x16bit
Based on
6ES7231-5QD320XB0
6ES7231-5QF320XB0
Ambient conditions
Relative to ambient temper- Tmin ... Tmax at 1080 hPa ... 795 hPa
ature-atmospheric pressure- (-1000 m ... +2000 m) //
installation altitude
(+2000 m ... +3500 m) //
(+3500 m ... +5000 m)
Relative humidity
- with condensation,
maximum
100 %; Relative humidity, incl.

condensation / frost permitted (no commissioning under condensation conditions)
Resistance
Yes; Class 3B2 mold, fungus and dry rot
substances/conformity with spores (with the exception of fauna). The
EN 60721-3-3
supplied connector covers must remain on
the unused interfaces during operation!
substances/conformity with according to EN 60068-2-52 (degree of
severity 3). The supplied connector covers
EN 60721-3-3
must remain on the unused interfaces during
operation!
substances/conformity with supplied connector covers must remain on
EN 60721-3-3
conditions for storage and
transport
Climatic conditions for storage
and transport
Free fall
- Drop height, max.
(in packaging)
Temperature
- Permissible temperature
range
-40 C to +70 C

conditions during operation
Temperature
- Min.
0 C; = Tmin
55 C; = Tmax
- max.
3/35
Siemens AG 2014
SIMATIC S7-1200
SIPLUS SM 1231 RTD signal modules
Overview
Ordering data

accuracy
4 inputs
Most popular resistance temperature detectors can be used
Note:
6AG1231-5PD...
6AG1231-5PF...
SM 1231 RTD 4x16bit SM 1231 RTD 8x16bit
Based on
6ES7231-5PD320XB0
6ES7231-5PF320XB0
Ambient conditions
Relative to ambient temper- Tmin ... Tmax at 1080 hPa ... 795 hPa
ature-atmospheric pressure- (-1000 m ... +2000 m) //
795 hPa ... 658 hPa (+2000 m ... +3500 m) //
658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
maximum
100 %; Relative humidity, incl.

condensation / frost permitted (no commissioning under condensation conditions)
Resistance
Yes; Class 3B2 mold, fungus and dry rot
substances/conformity with spores (with the exception of fauna). The
EN 60721-3-3
supplied connector covers must remain on
Yes; Class 3C4 incl. salt spray. The supplied
substances/conformity with connector covers must remain on the
EN 60721-3-3
substances/conformity with supplied connector covers must remain on
EN 60721-3-3
transport
and transport
Free fall
- Drop height, max.
(in packaging)
Temperature
range
-40 C to +70 C

Temperature
- Min.
-25 C; = Tmin
70 C; = Tmax
- max.
3/36
Article No.
SIPLUS SM 1231 RTD signal

module
medial exposure)
Pt10/50/100/200/500/1000,
Ni100/120/200/500/1000,
Cu10/50/100, LG-Ni1000;
resolution 15 bits + sign;
replaces 6AG1231-5PD30-2XB0
On request

Pt10/50/100/200/500/1000,
Ni100/120/200/500/1000,
Cu10/50/100, LG-Ni1000;
resolution 15 bits + sign;
replaces 6AG1231-5PF30-2XB0
On request
Accessories
See SIMATIC S7-1200

SM 1231 RTD signal module,
Siemens AG 2014
SIMATIC S7-1200
Special modules
SM 1278 4xIO-Link Master
Overview
Ordering data
Module for connecting up to 4 IO-Link devices in accordance

with IO Link specification V1.1. The IO-Link parameters are
configured using the Port Configuration Tool (PCT), version
V3.2 and higher.
SM 1278 signal module

4xIO-Link master
Article No.
6ES7278-4BD32-0XB0
For the connection of up to

4 IO-Link devices according to
IO Link Specification V1.1
6ES7278-4BD32-0XB0
SM 1278, IO-Link Master
Supply voltage
24 V DC
Yes
permissible range, upper limit (DC)
28.8 V
Power losses
Power loss, typ.
1W
Diagnostic messages
Yes
IP20
Yes

RCM (former C-TICK)
Yes
FM approval
Yes

transport
Free fall
package
Temperature
-40 C to +70 C
1080 to 660 hPa
Relative humidity
- Permissible range
95 %
(without condensation) at 25 C
during operation
Temperature
Mechanics/material
Plastic
Yes
Dimensions
Width
45 mm
Height
100 mm
Depth
75 mm
Weights
Weight, approx.
150 g
3/37
Siemens AG 2014
SIMATIC S7-1200
Special modules
SIWAREX WP231
Overview
SIWAREX WP231
Load cells
Strain gauges in 4-wire or 6-wire

system
Load cell excitation

Supply voltage
(regulated via feedback)
SIWAREX WP231 is a versatile weighing module for all simple

weighing and force measuring tasks. The compact module is
easy to install in the SIMATIC S7-1200 automation system. It can
also be operated without a SIMATIC CPU.
SIWAREX WP231
Integration in automation systems
4.85 V DC
Permissible load resistance

RLmin
RLmax
> 40
< 4 100
With SIWAREX IS Ex interface

RLmin
RLmax
> 50
< 4 100
Load cell characteristic
1 4 mV/V
Permissible range of
the measurement signal
(with 4 mV/V sensors)
-21.3 ... +21.3 mV
Max. distance of load cells
500 m (229.66 ft)
Connection to load cells

in Ex zone 1
Optionally via
SIWAREX IS Ex interface
Ex approvals
ATEX Zone 2
UL
FM available soon
Auxiliary power supply

Rated voltage
24 V DC
Max. power consumption
200 mA
Max. power consumption

SIMATIC Bus
3 mA
IP degree of protection
to DIN EN 60529; IEC 60529
IP20
S7-1200
Operator panel
Automation systems from other
manufacturers
(possible with limitations)
Directly via SIMATIC bus

Via Ethernet (Modbus TCP/IP) or
RS 485 (Modbus RTU)
Vertical installation
-10 ... +55 C (14 ... 131 F)
Communication interfaces
SIMATIC S7-1200 backplane bus

RS 485
Ethernet
Horizontal installation
-10 ... +40 C (14 ... 104 F)
EMC requirements according to
EN 45501
Connection of remote displays

(via RS 485)
Display for weight value
Dimensions
70 x 75 x 100 mm
(2.76 x 2.95 x 3.94 inches)
Adjustment of scale settings
PC configuration software SIWATOOL

(Ethernet) or directly connected
operator panel (Modbus)
Climatic requirements
Tmin (IND) ... Tmax (IND)
(operating temperature)
Ordering data
Article No.
Measuring accuracy
Error limit according to DIN 1319-1
of full-scale value at 20 C 10 K
(68 F 10 K)
0.05 %
Internal resolution
up to 4 million parts
Number of measurements/second
100
Filters
Low-pass filter 0.1 ... 50 Hz

Mean value filter
Weighing functions
SIWAREX S7-1200 device manual

Available in a range of languages
Free download on the Internet at:
http://www.siemens.com/weighingtechnology
SIWAREX WP231 "Ready for Use"
Weight values
Gross
Net
Tare
Limits
Min/max
Empty
Zeroing function
Per command
Tare function
Per command
Tare specification
Per command
3/38
SIWAREX WP231
Weighing electronics for scales in
SIMATIC S7-1200
Complete software package for

non-automatic scale (for S7-1200
and a directly connected operator
panel)
Free download from Internet at:
http://www.siemens.com/weighingtechnology
7MH4960-2AA01
Siemens AG 2014
SIMATIC S7-1200
Special modules
SIWAREX WP231
Ordering data
Configuration package
SIWAREX WP231 on CD-ROM
for TIA Portal V11
"Ready for use" software for
operating a scale with
SIWAREX WP231 and a touch
panel (in a variety of languages)
SIWATOOL V7.0 calibration tool
Article No.
7MH4960-2AK01
SIWAREX JB junction box,

aluminum housing
For connecting SIWAREX WP231 to

a PC (SIWATOOL), SIMATIC CPU,
panel, etc.
Remote display (optional)
The digital remote displays
can be connected directly to the
SIWAREX WP231 via the
RS 485 interface.
Suitable remote display:
S102
Siebert Industrieelektronik GmbH
P.O. Box 1180
D-66565 Eppelborn, Germany
Tel.: +49 6806/980-0
Fax: +49 6806/980-999
Internet: http://www.siebert.de
Detailed information is available
from manufacturer.
7MH4710-1BA
For connecting up to 4 load cells in

parallel, and for connecting several
junction boxes
SIWAREX JB junction box,
stainless steel housing
Device manuals (PDF files in a

variety of languages)
Ethernet cable patch cord 2 m
(7 ft)
Article No.
Accessories
6XV1850-2GH20
7MH4710-1EA
For connecting up to 4 load cells in

parallel
Ex interface, type SIWAREX IS
With ATEX approval, but without
UL and FM approvals, for intrinsically-safe connection of load cells,
including device manual
Suitable for the SIWAREX U, CS,
MS, FTA, FTC, M, CF and WP231
weighing modules
Approved for use in the EU
Short-circuit current < 199 mA DC
Short-circuit current < 137 mA DC
7MH4710-5BA
7MH4710-5CA
Cable (optional)
Cables Li2Y 1 x 2 x 0.75 ST +
2 x (2 x 0.34 ST) CY,
orange sheath
7MH4702-8AG
To connect SIWAREX U, CS, MS,

FTA, FTC, M, CF, WP231, WP241
and WP321 to the junction box (JB),
extension box (EB) and Ex interface
(Ex I) or between two JBs,
for fixed laying, occasional bending
permitted, approx. 10.8 mm
(0.43 inch) outer diameter, for
ambient temperature -40 ... +80 C
(-104 ... +176 F)
Cable Li2Y 1 x 2 x 0.75 ST +
2 x (2 x 0.34 ST) CY,
blue sheath
7MH4702-8AF
To connect SIWAREX U, CS, MS,

FTA, FTC, M, CF, WP231, WP241
and WP321 to the junction box (JB),
extension box (EB) and Ex interface
(Ex I) or between two JBs,
for fixed laying, occasional bending
permitted, approx. 10.8 mm
(0.43 inch) outer diameter, for
ambient temperature -40 ... +80 C
(-104 ... +176 F)
DIN rail ground terminals
for load cell cables
6ES5728-8MA11
Terminals for connecting the

load cell cable shield to the
grounded DIN rail
3/39
Siemens AG 2014
SIMATIC S7-1200
Communication
Overview
6ES7241-1CH326ES7241-1AH320XB0
0XB0
CM 1241 RS422/485 CM 1241 RS232
transport
and transport
Free fall
- Drop height, max.
(in packaging)
Temperature
range
IEC 60068-2-13
Relative humidity
- Permissible range (without
condensation) at 25 C
For quick, high-performance serial data exchange

via point-to-point connection
Implemented protocols: ASCII, USS drive protocol,
Modbus RTU
Additional protocols can also be loaded
Simple parameterization with STEP 7 Basic
6ES7241-1CH326ES7241-1AH320XB0
0XB0
CM 1241 RS422/485 CM 1241 RS232
Supply voltage
24 V DC

dispatch package

dispatch package
-40 C to +70 C
-40 C to +70 C
1080 to 660 hPa
1080 to 660 hPa
95 %
95 %

Temperature
5C to 55C,
change
3C / minute
IEC 60068-2-13
1080 to 795 hPa
5C to 55C,
3C / minute
1080 to 795 hPa
Software
Runtime software
Target system
- S7-1200
Yes
Yes
Dimensions
Width
30 mm
30 mm
Height
100 mm
100 mm
Yes
Yes
Depth
75 mm
75 mm
permissible range, lower limit

(DC)
20.4 V
20.4 V
Weights
Weight, approx.
155 g
150 g
permissible range, upper limit

(DC)
28.8 V
28.8 V
Input current
Current consumption, max.
220 mA; From L5+;

logic
Power losses
Power loss, typ.
1.2 W
1.1 W
Interfaces
Number of interfaces
1
Yes
Interface physics, RS 232C

(V.24)
Interface physics,
RS 422/RS 485 (X.27)
Point-to-point
Cable length, max.
Integrated protocol driver
- ASCII
- USS
3/40
Yes
1 000 m
Yes; Available as
library function
Yes; Available as
library function
10 m
Siemens AG 2014
SIMATIC S7-1200
Communication
Ordering data
Article No.
CM 1241 communication module

Communication module for
point-to-point connection,
with one RS422/485 interface
with one RS232 interface
Article No.
Accessories
6ES7241-1CH32-0XB0

For communication modules
6ES7241-1AH32-0XB0
6ES7291-1CC30-0XA0

System Manual
For SIMATIC S7-1200

and STEP 7 Basic
German
6ES7298-8FA30-8AH0
English
6ES7298-8FA30-8BH0
French
6ES7298-8FA30-8CH0
Spanish
6ES7298-8FA30-8DH0
Italian
6ES7298-8FA30-8EH0
Chinese
6ES7298-8FA30-8KH0

Easy Book
Brief instructions
German
6ES7298-8FA30-8AQ0
English
6ES7298-8FA30-8BQ0
French
6ES7298-8FA30-8CQ0
Spanish
6ES7298-8FA30-8DQ0
Italian
6ES7298-8FA30-8EQ0
Chinese
6ES7298-8FA30-8KQ0
3/41
Siemens AG 2014
SIMATIC S7-1200
SIPLUS CM 1241 communication modules
Overview
For fast, high-performance serial data exchange via
point-to-point coupling
Modbus RTU
Additional protocols can also be loaded
Note:
The technical data correspond to those of the based-on modules apart from the values listed in the table.
Based on
6AG1241-1AH32-2XB0
CM 1241 RS232
6AG1241-1AH30-4XB0
CM 1241 RS232
6AG1241-1CH31-2XB0
CM 1241 RS422/485
6AG1241-1CH31-4XB0
CM 1241 RS422/485
6ES7241-1AH32-0XB0
6ES7241-1AH30-0XB0
6ES7241-1CH31-0XB0
6ES7241-1CH31-0XB0
Ambient conditions
altitude
Relative humidity
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
-25 C

transport
Free fall
Temperature
3/42
-40 C to +70 C
Siemens AG 2014
SIMATIC S7-1200
SIPLUS CM 1241 communication modules

Based on
6AG1241-1AH32-2XB0
CM 1241 RS232
6AG1241-1AH30-4XB0
CM 1241 RS232
6AG1241-1CH31-2XB0
CM 1241 RS422/485
6AG1241-1CH31-4XB0
CM 1241 RS422/485
6ES7241-1AH32-0XB0
6ES7241-1AH30-0XB0
6ES7241-1CH31-0XB0
6ES7241-1CH31-0XB0
0 C; = Tmin
-25 C
0 C; = Tmin
55 C; = Tmax
70 C; Tmax > 55 C
derating: Max. one module
may be configured; this
module must be the last
module on the CM bus;
minimum clearance on the
left side of at least 45 mm
55 C; = Tmax

during operation
Temperature
- Min.
-40 C; = Tmin;
startup @ -25 C
70 C; = Tmax
- max.
5C to 55C, 3C / minute
- Permissible temperature change
Ordering data
Article No.
SIPLUS CM 1241 communication

module
5C to 55C, 3C / minute
Article No.
Accessories

medial exposure)
See SIMATIC S7-1200

CM 1241 communication module,
catalog ST 70 N 2014, page 3/41
Ambient temperature -25 ... +70 C

6AG1241-1CH31-2XB0

6AG1241-1AH32-2XB0

(conformal coating)
6AG1241-1CH31-4XB0

6AG1241-1AH30-4XB0
3/43
Siemens AG 2014
SIMATIC S7-1200
SIPLUS CB 1241 RS485 communication board
Overview
Ordering data
For fast, high-performance serial data exchange

via point-to-point connection
Modbus RTU
Additional protocols can be loaded later
Can be plugged directly into the CPU
Note:
3/44
SIPLUS CB 1241
RS485 communication board
Article No.
6AG1241-1CH30-5XB1
for point-to-point connection,

Accessories
See SIMATIC CB 1241 RS485

communication board,
catalog ST 70 2013, S. 3/107
Siemens AG 2014
SIMATIC S7-1200
SIPLUS NET CSM 1277
Overview
Article No.
6AG1277-1AA10-4AA0
Product-type designation
SIPLUS CSM 1277
Based on
6GK7277-1AA10-0AA0
Permitted ambient conditions

Ambient temperature
during operating
0 C
during storage
60 C
-40 C
during transport
70 C
-40 C
70 C
Compliant with EN 60721-3-3, Class
Resistance to biologically active
substances conformity in accordance 3B2 mold and fungal spores (except
fauna); the supplied plug covers
with EN 60721-3-3
must remain in place on the unused
interfaces during operation.
Unmanaged switch for connection of SIPLUS S7-1200 to an

Industrial Ethernet network with a line, tree or star topology
Multiplication of Ethernet interfaces on a SIPLUS S7-1200 for
additional connection of up to three programming devices,
operator controls, and further Ethernet nodes
Simple, space-saving mounting on the SIPLUS S7-1200 rail
Low-cost solution for implementing small, local Ethernet
networks
Problem-free connection using RJ45 standard connectors
Simple and fast status display via LEDs on the device
Integral autocrossover function permits use of uncrossed
connecting cables
Note:
SIPLUS NET CSM 1277
Article number
6AG1277-1AA10-4AA0
Article number based on
6GK7277-1AA10-0AA0
0 +60 C

Resistance to chemically active
substances conformity in accordance 3C4 incl. salt spray in accordance
with EN 60068-2-52 (severity 3); the
with EN 60721-3-3
supplied plug covers must remain in
place on the unused interfaces
during operation.
Resistance to mechanically active
substances conformity in accordance 3S4 incl. sand, dust; the supplied
plug covers must remain in place on
with EN 60721-3-3 note
the unused interfaces during
operation.
Ordering data
Article No.
SIPLUS NET CSM 1277

compact switch module
medial exposure)
Unmanaged switch for connection
of SIPLUS S7-1200 and up to three
further nodes to Industrial Ethernet
with 10/100 Mbit/s;
4 x RJ45 ports; external 24 V DC
power supply, LED diagnostics,
S7-1200 module including
electronic Manual on CD-ROM
6AG1277-1AA10-4AA0
Accessories
See CSM 1277 unmanaged,

3/45
Siemens AG 2014
SIMATIC S7-1200
SIMATIC HMI Basic Panels (2nd Generation)
Overview
With their fully developed HMI basic functions, 2nd generation
SIMATIC HMI Basic Panels are the ideal entry level series for
simple HMI applications.
The device family offers panels with 4", 7", 9" and 12" widescreen
displays, as well as combined key and touch operation.
3
KTP Basic Panel family 2nd generation
The innovative high-resolution widescreen displays with

64 000 colors are also suitable for upright installation, and
they can be dimmed down to 100 %. The innovative operator
interface with improved usability opens up a diverse range of
options thanks to new controls and graphics. The new USB
interface enables the connection of keyboard, mouse or
barcode scanner, and supports the simple archiving of data
on a USB stick.
The integrated Ethernet or RS 485/422 interface (PROFIBUS
devices planned) enables simple connection to the controller.
SIMATIC HMI KTP400 Basic / KTP700 Basic / KTP900 Basic
KTP400 Basic
KTP700 Basic
KTP900 Basic
Display
4.3" TFT LCD, 64K colors
7" TFT LCD, 64K colors
9" TFT LCD, 64K colors
Resolution (W x H in pixels)
482 x 272
800 x 480
MTBF 1) Backlight
(at 25C)
approx. 20 000 h 2)
Type of operation
Touch screen
Operator controls
Keys and touch
Function keys, programmable /

system keys
4/0
Alpha / numeric input
Yes/Yes
8/0
Memory
Usable memory for application data 10 MB Flash
Memory for options / recipes
- / 256 KB integrated Flash
Interfaces
1 x Ethernet (RJ45), 1 x USB
Connection to PLC
SIMATIC: S7-1200, S7-1500, S7-200, S7-300, S7-400; ET200S CPU, LOGO!
1 x Ethernet (RJ45),
1 x USB
or
1 x RS 422 / RS 485,
1 x USB
1 x Ethernet (RJ45), 1 x USB
for PROFIBUS devices (DP): Allen Bradley (DF1), Modicon MODBUS serial, Mitsubishi FX (serial), Omron
Hostlink/Multilink
For PROFINET Devices (PN): Modicon MODBUS TCP/IP, Allen-Bradley Ethernet IP, Mitsubishi (MC TCP/IP)
Supply voltage
24 V DC
Clock
Real-time clock, with backup (min. 6 weeks), can be synchronized
Degree of protection
Front / rear
IP65, enclosure Type 4x/Type 12 (indoor use only) / IP20
Certification
CE, cULus, C-Tick
Functionality with WinCC flexible /

WinCC (TIA Portal)
Alarm logging
Number of alarms
1 000
Number of alarm classes
32
Discrete / analog alarms
Yes/Yes
Alarm buffer
Ring buffer, 256 entries, non-volatile
Tags
800
Recipes
50
Graphics objects
Bitmaps, icons, full-screen icon, vector graphics
1)
MTBF: Operating hours after which the maximum screen brightness is reduced by half compared to the original value.
2)
The MTBF is increased by using the built-in dimming function
3/46
Siemens AG 2014
SIMATIC S7-1200
SIMATIC HMI Basic Panels (2nd Generation)

KTP400 Basic
Dynamic objects
Charts, bar graphs, trends
Libraries
Yes
Text lists / graphics lists
Yes/Yes
KTP700 Basic
KTP900 Basic
Logging
Number of logs per project
Number of entries per log
10 000
Log types
Ring, sequential, alarm, process value
Memory location
USB memory stick
Data storage format
TXT file
External analysis
Readable, e.g. with MS Excel, MS Access, etc.
Log size
Depending on the available space on the external stick.
Online analysis
User administration (security)

Number of user groups /
number of user rights
50 / 32
Languages
Online languages
10
Project languages
(including system alarms)
Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian,
Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish
Character set
Tahoma, WinCC Standard, Symbol languages
Configuration tool
Transfer (upload / download)
PROFINET; MPI/PROFIBUS DP; automatic transfer detection
Dimensions
Enclosure front (W x H) in mm
141 x 116
214 x 158
267 x 182
Mounting cutout in mm
123 x 99
197 x 141
251 x 166
1)
MTBF: Operating hours after which the maximum screen brightness is reduced by half compared to the original value.
2)
The MTBF is increased by using the built-in dimming function
Ordering data
Article No.
SIMATIC HMI Basic Panels,

Key and Touch
SIMATIC HMI KTP400 Basic
6AV2123-2DB03-0AX0
6AV2123-2GB03-0AX0
6AV2123-2JB03-0AX0
Starter kits
Starter kit SIMATIC S7-1200 +
KP300 Basic mono PN
6AV6651-7HA01-3AA4
Starter Kit SIMATIC S7-1200 +

KTP400 Basic
6AV6651-7KA01-3AA4
Starter Kit SIMATIC S7-1200 +

KTP700 Basic
6AV6651-7DA01-3AA4
Starter kits with an S7-1200

consist of:
the respective
SIMATIC HMI Basic Panel
SIMATIC HMI KP300 Basic
mono PN
SIMATIC S7-1200 CPU 1212C
AC/DC/Rly
SIMATIC S7-1200 Simulator
Module SIM 12
SIMATIC STEP 7 BASIC CD
SIMATIC S7-1200 HMI Manual
Collection CD
Ethernet CAT5 cable, 2 m
Article No.
LOGO! starter kit +
KP300 Basic mono PN
6AV2132-0HA00-0AA1
LOGO! starter kit +

KTP400 Basic
6AV2132-0KA00-0AA1
Starter kits with a LOGO! consist of:

the respective SIMATIC HMI
Basic Panel
SIMATIC HMI KP300 Basic
mono PN
LOGO! 12/24 RCE
LOGO! POWER 24 V 1.3 A
LOGO! SOFT COMFORT V7
WINCC BASIC (TIA Portal)
Ethernet CAT5 cable, 2 m
Documentation
You can find the manual for the
Basic Panels on the Internet at:
http://support.automation.
siemens.com
Accessories
See catalog ST 80/ST PC,

HMI accessories
3/47
Siemens AG 2014
SIMATIC S7-1200
Add-on products from third-party manufacturers
SIMATIC S7-1200 CM CANopen
Note
The following catalog pages contain information on supplementary products that are manufactured and marketed, not by
Siemens, but by third-parties outside the Siemens group
("external companies"). These external companies organize the
manufacture, sale and delivery of their products independently.
Their own terms and conditions of business and delivery apply.
Responsibility for these supplementary products and for the

associated information presented here rests exclusively with the
respective external company. Unless compulsory by law,
Siemens assumes no liability and makes no guarantee for
supplemental products of external companies. Please refer also
to the note on "Exemption from liability/Use of hyperlinks"
included with each product.
Overview
The CM CANopen module has the following properties:

Interface module for CANopen (master/slave) for
SIMATIC S7-1200
Connection of up to 16 CANopen slave stations in the master
mode
256 bytes of input data and 256 bytes of output data per
module
Connection of up to 3 modules per CPU
3 LEDs for module, network and I/O status diagnostics
Possible integration of the module into the hardware catalog
of the TIA Portal configuration suite
Supports Transparent CAN 2.0A for processing customerspecific protocols
CANopen implementation according to communication
profiles CiA 301 Rev. 4.2 and CiA 302 Rev. 4.1 (Master)
More information
The CANopen bus can be configured via any commercially
available CANopen configuration tool. The HMS company also
supplies suitable "CM CANopen Configuration Studio" software
with the product. The configuration is saved directly on the
module by means of a USB connection. Routing via
PROFIBUS/PROFINET is not possible.
Preprogrammed function blocks are available for easier PLC
programming in the TIA Portal.
For further information, please contact HMS directly:
http://www.hms-networks.com/can-for-s7-1200
Ordering and Support
Please note that ordering and support for the module are exclusively carried out via HMS. Please contact HMS directly should
you have any questions concerning this module. The relevant
contact details can be found on the Internet at
Note
The CM CANopen module is an HMS product and can only be
obtained through HMS.
Overview
An interface module is available for operating the S7-1200 on
CANopen. It can be used together with system and IO components of the S7-1200 automation system.
Application
CANopen is a widely used industrial bus system and can be
used for a variety of different applications. The module allows
simple and cost-effective connection of CANopen applications
to SIMATIC.
Control of hydraulic valves/axes in vehicles
Control of motors in packaging machines or conveyors
Capturing of angular encoder positions in wind turbines
Capturing of control devices on machines, e.g. joysticks
Capturing the measured data of path encoders, inclinometers
or angular encoders, e.g. for tower cranes and gantry cranes
3/48
http://www.hms-networks.com/can-for-s7-1200
Exemption from liability/Use of hyperlinks
Siemens has prepared this description with great care. It is not
possible, however, for Siemens to verify that the data supplied
by external companies is complete, correct or up to date. The
possibility that individual items of information might be incorrect,
incomplete, or not up-to-date cannot therefore be ruled out.
Unless compulsory by law, Siemens accepts no liability for the
usability of the data or of the product for the user per se.
This article contains third-party Web addresses. Siemens is not
responsible for the contents of these Web sites, nor does
Siemens adopt these Web sites and their contents, as Siemens
does not control the presented information and cannot be held
responsible for the content and information they contain. You
therefore use these links at your own risk.
Siemens AG 2014
SIMATIC S7-1500
4/2
4/2
4/7
4/10

Standard CPUs
SIPLUS Standard CPUs
Fail-safe CPUs
4/15
4/15
4/19
4/25
Digital modules
SM 521 digital input modules
SM 522 digital output modules
SM 523 digital input/output modules
4/27
4/27
4/28

SIPLUS SM 521 digital modules
4/30
4/30
4/31

SIPLUS SM 531 analog modules
4/32
4/32
Technology modules
TM PosInput 2 position detection
modules
4/35
4/35
SIPLUS technology modules

SIPLUS TM Count 2x24V counter
modules
4/36
4/36
4/38
Communication
CP 1542-5
CM 1542-1
4/41
4/41
4/43
SIPLUS CM PtP
SIPLUS CM 1542-5
4/44
4/44
Connection system
Front connectors
4/45
4/45
4/46
SIPLUS power supplies

SIPLUS system power supplies
SIPLUS load power supplies
Brochures
printmaterial
Siemens AG 2014
SIMATIC S7-1500
Standard CPUs
Overview CPU 1515-2 PN
Overview CPU 1518-4 PN/DP
The CPU for applications with medium to high requirements

for program/data storage in the S7-1500 controller product
range
Medium to high processing speed for binary and floatingpoint arithmetic
Used as central controller in production lines with central and
distributed I/O
PROFINET IO IRT interface with 2-port switch
Additional PROFINET interface with separate IP address
PROFINET IO Controller for operating distributed I/O on
PROFINET
PROFINET I-Device for connecting the CPU as an intelligent
PROFINET device under a SIMATIC or non-Siemens
PROFINET I/O controller
Isochronous mode
Integrated Motion Control functionalities for controlling speedcontrolled and positioning axes, support for external encoders
Integrated web server with the option of creating user-defined
web pages
SIMATIC memory card required for operation of the CPU
The CPU with a very large program and data memory in the
S7-1500 controller product range for demanding applications
with extremely high requirements regarding program scope,
performance and networking
Extremely high processing speed for binary and floating-point
arithmetic
For cross-industry automation tasks in series machine, special
machine and plant construction
distributed I/O
Two additional PROFINET interfaces with separate IP address
PROFINET IO controller for operating distributed I/O on
PROFINET.
PROFINET IO controller.
PROFIBUS DP master interface
Isochronous mode on PROFIBUS and PROFINET
Integrated web server with the option of creating user-defined
web pages
6ES7515-2AM00-0AB0
CPU 1515-2 PN
General information
Engineering with
STEP 7 TIA Portal can be configured/integrated as V13
of version
6ES7518-4AP00-0AB0
CPU 1518-4 PN/DP
V13
Display
Screen diagonal (cm)
6.1 cm
6.1 cm
Supply voltage
Type of supply voltage
24 V DC
24 V DC
Power losses
Power loss, typ.
6.3 W
24 W
Memory
Work memory
integrated (for program)
integrated (for data)
500 kbyte
3 Mbyte
3 Mbyte
10 Mbyte
Load memory
Plug-in (SIMATIC Memory Card), max.
32 Gbyte
32 Gbyte

30 ns
1 ns
36 ns
2 ns
for fixed point arithmetic, typ.
48 ns
2 ns
192 ns
6 ns
Counters, timers and their retentivity

S7 counter
Number
2 048
2 048
IEC counter
Number
Any (only limited by the main memory)
S7 times
Number
2 048
2 048
IEC timer
Number
4/2
Siemens AG 2014
SIMATIC S7-1500
Standard CPUs

6ES7515-2AM00-0AB0
CPU 1515-2 PN
6ES7518-4AP00-0AB0
CPU 1518-4 PN/DP

Flag
Number, max.
16 kbyte
16 kbyte
Address area
I/O address area
Inputs
Outputs
32 kbyte; All inputs are in the process image

32 kbyte; All outputs are in the process image

Time of day
Clock
Type
Hardware clock
Hardware clock
2
Yes
Yes
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1
No
Yes
1
No
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Interfaces
1st interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- PROFINET IO Controller
- PROFINET IO Device
- SIMATIC communication
- Open IE communication
- Web server
- Media redundancy
2nd interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- Web server
3rd interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- Web server
1
No
Yes
No
No
Yes
Yes
Yes
4th interface
Interface types
- Number of ports
- RS 485
Protocols
- PROFIBUS DP master
- PROFIBUS DP slave
Protocols
Number of connections
Number of connections, max.
Services
- Max. number of connectable IO devices for RT
- Number of IO Devices with IRT and the option
"high performance", max.
PROFIBUS
Services
- Number of DP slaves
1
Yes
Yes
Yes
No
192
384
256
64
512
64
125
4/3
Siemens AG 2014
SIMATIC S7-1500
Standard CPUs

6ES7515-2AM00-0AB0
CPU 1515-2 PN
6ES7518-4AP00-0AB0
CPU 1518-4 PN/DP
Yes
Yes
Yes
Yes
20; Up to 20 axes in total (speed-controlled,

positioning axis, external encoders) are supported





Yes; Universal PID controller with integrated

optimization
Yes; PID controller with integrated optimization for
valves

optimization
valves
Yes
Yes
0 C
60 C; Display: 50 C, at an operating temperature
of typically 50 C, the display is switched off
0 C
0 C
0 C
Configuration
programming
- LAD
- FBD
- STL
- SCL
- GRAPH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Know-how protection
User program protection
Copy protection
Block protection
Yes
Yes
Yes
Yes
Yes
Yes
Access protection
Password for display
Protection level: Write protection
Protection level: Read/write protection
Protection level: Complete protection
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
70 mm
175 mm
Height
147 mm
147 mm
Depth
129 mm
129 mm
Weights
Weight, approx.
830 g
1 988 g
Isochronous mode
Isochronous operation
(application synchronized up to terminal)
supported technology objects
Motion
Speed-controlled axis
- Number of speed-controlled axes, max.
Positioning axis
- Number of positioning axes, max.
External encoders
- Number of external encoders, max.
Controller
PID_Compact
PID_3Step
Counting and measuring
High-speed counter
Ambient conditions
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
4/4
Siemens AG 2014
SIMATIC S7-1500
Standard CPUs
Ordering data
CPU 1515-2 PN
Article No.
6ES7515-2AM00-0AB0
Work memory 500 KB for program,

3 MB for data, PROFINET IO IRT
interface, PROFINET interface;
SIMATIC memory card required
CPU 1518-4 PN/DP
6ES7518-4AP00-0AB0
Article No.
PROFIBUS FC Standard Cable GP
PROFIBUS FC Robust Cable
Work memory 3 MB for program,

interface, 2 PROFINET/PROFIBUS
interfaces; SIMATIC memory card
required
PROFIBUS FC Flexible Cable
SIMATIC memory card

4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
2-wire, shielded;
sold by the meter; max. delivery
unit 1000 m, minimum order
quantity 20 m
24 MB
6ES7954-8LF02-0AA0
PROFIBUS FC Trailing Cable
2 GB
6ES7954-8LP01-0AA0
2-wire, shielded;
quantity 20 m
SIMATIC S7-1500 mounting rail

Fixed lengths, with grounding
elements
160 mm
482 mm
530 mm
830 mm
6ES7590-1AB60-0AA0
6ES7590-1AE80-0AA0
6ES7590-1AF30-0AA0
6ES7590-1AJ30-0AA0
For cutting to length by customer,

without drill holes; grounding
elements must be ordered
separately
2000 mm
6ES7590-1BC00-0AA0
6ES7590-5AA00-0AA0
6XV1830-3EH10
Sheath color: Violet
6XV1831-2L
PROFIBUS FC Food Cable
6XV1830-0GH10
2-wire, shielded;
quantity 20 m
For supplying the backplane bus

of the S7-1500
24 V DC input voltage, power 25 W
6ES7505-0KA00-0AB0
24/48/60 V DC input voltage,

power 60 W
6ES7505-0RA00-0AB0
120/230 V AC input voltage,

power 60 W
6ES7507-0RA00-0AB0
Power connector
6ES7590-8AA00-0AA0
With coding element for power

supply module; spare part, 10 units
6XV1830-3FH10
2-wire, shielded;
quantity 20 m
PROFIBUS FC FRNC Cable GP
Power supply
6XV1831-2K
Sheath color: Petrol
PROFIBUS FC Ground Cable
20 units
6XV1830-0LH10
2-wire, shielded, flame-retardant,

with copolymer outer sheath FRNC;
quantity 20 m
PROFIBUS FastConnect
Stripping Tool
6GK1905-6AA00
Preadjusted stripping tool for

fast stripping of PROFIBUS
FastConnect bus cables
IE FC RJ45 plugs
Load power supply

24 V DC/3A
6EP1332-4BA00
24 V DC/8A
6EP1333-4BA00
Power supply connector

Spare part; for connecting
the 24 V DC supply voltage
with push-in terminals
6XV1830-0JH10
2-wire, shielded;
quantity 20 m
Accessories
PE connection element for

mounting rail 2000 mm
6XV1830-0EH10
Standard type with special design

for fast mounting, 2-core, shielded;
quantity 20 m
RJ45 plug connector for Industrial

Ethernet with a rugged metal
enclosure and integrated insulation
displacement contacts for
connecting Industrial Ethernet FC
installation cables
IE FC RJ45 Plug 180
180 cable outlet
6ES7193-4JB00-0AA0
1 unit
6GK1901-1BB10-2AA0
PROFIBUS FastConnect bus

connector RS485 with 90 cable
outlet
10 units
6GK1901-1BB10-2AB0
50 units
6GK1901-1BB10-2AE0
with insulation displacement,

max. transmission rate 12 Mbit/s
IE FC TP Standard Cable GP 2x2
6XV1840-2AH10
without PG interface, grounding

via control cabinet contact surface;
1 unit
6ES7972-0BA70-0XA0
with PG interface, grounding

1 unit
6ES7972-0BB70-0XA0
4-core, shielded TP installation

cable for connection to
IE FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compliant;
with UL approval;
quantity 20 m
4/5
Siemens AG 2014
SIMATIC S7-1500
Standard CPUs
Ordering data
IE FC TP Trailing Cable 2 x 2
(Type C)
Article No.
6XV1840-3AH10

cable for connection to IE FC Outlet
RJ45/ IE FC RJ45 Plug 180/90 for
use as trailing cable; PROFINETcompatible; with UL approval;
quantity 20 m
IE FC TP Marine Cable 2 x 2
(Type B)
6XV1840-4AH10

RJ45/ IE FC RJ45 Plug 180/90
with marine approval,
quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool for fast

stripping of Industrial Ethernet FC
cables
Display
6ES7591-1BA00-0AA0
Article No.
STEP 7 Professional V13
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish
Floating License
6ES7822-1AA03-0YA5

Floating License,
software download
incl. license key 1)
6ES7822-1AE03-0YA5
For CPU 1515-2 PN,

CPU 1516-3 PN/DP and
CPU 1518-4 PN/DP; spare part
Front cover for PROFIBUS DP
interface
6ES7591-8AA00-0AA0
Spare part
1)
4/6

Siemens AG 2014
SIMATIC S7-1500
Overview SIPLUS CPU 1511-1 PN
Overview SIPLUS CPU 1513-1 PN
Entry-level CPU in the S7-1500 controller product range

Suitable for applications with medium requirements for
program scope and processing speed
distributed I/O
PROFINET
Isochronous mode
The CPU for applications with medium/high requirements for

program/data storage in the S7-1500 controller product range
High processing speed for binary and floating-point arithmetic
distributed I/O
PROFINET
Isochronous mode
Note:
Note:


4/7
Siemens AG 2014
SIMATIC S7-1500
Overview SIPLUS CPU 1516-3 PN/DP

The CPU with large program and data memory in the S7-1500
controller product range for applications with high program
scope requirements.
distributed I/O
Additional PROFINET interface with separate IP address
PROFINET.
PROFIBUS DP master interface
Isochronous mode on PROFIBUS and PROFINET
Note:
Based on
Ambient conditions

Storage/transport temperature
Min.
max.
altitude
6AG1511-1AK00-2AB0
SIPLUS CPU 1511-1 PN
6AG1513-1AL00-2AB0
6AG1516-3AN00-2AB0
SIPLUS CPU 1516-3 PN/DP
6ES7511-1AK00-0AB0
6ES7513-1AL00-0AB0
6ES7516-3AN00-0AB0
-40 C; = Tmin; startup @ -25 C;

startup display @ -20 C
60 C; Display: 50 C, at an operating
temperature of typically 50 C, the
display is switched off


-40 C
70 C
-40 C
70 C
-40 C
70 C
Tmin ... Tmax

at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax

at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)


Relative humidity
accordance with IEC 60068-2-38, (no commissioning under condenmaximum
sation conditions)
4/8
Siemens AG 2014
SIMATIC S7-1500

Based on
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data
6AG1511-1AK00-2AB0
6AG1513-1AL00-2AB0
6AG1516-3AN00-2AB0
6ES7511-1AK00-0AB0
6ES7513-1AL00-0AB0
6ES7516-3AN00-0AB0

fauna). The supplied connector covers
must remain on the unused interfaces
during operation!
remain on the unused interfaces during
operation!

during operation!
operation!

during operation!
operation!
Article No.
6AG1511-1AK00-2AB0

medial exposure)
Article No.
Accessories
Power supply
medial exposure)

interface, SIMATIC memory card
required
6AG1505-0KA00-7AB0

power 60 W
6AG1505-0RA00-7AB0

medial exposure)

power 60 W
6AG1507-0RA00-7AB0

1.5 MB for data, PROFINET IO IRT
interface, SIMATIC memory card
required
Load power supply

medial exposure)
1 MB RAM for program, 5 MB for
data, PROFINET IO IRT interface,
PROFINET/PROFIBUS interface;
6AG1513-1AL00-2AB0
(extended temperature range

and medial exposure)
6AG1516-3AN00-2AB0
24 V DC/3A
6AG1332-4BA00-7AA0
24 V DC/8A
6AG1333-4BA00-7AA0
Display
6AG1591-1AA00-2AA0
(extended temperature range

and medial exposure)
for SIPLUS CPU 1511-1 PN and
CPU 1513-1 PN; spare part
Display
6AG1591-1BA00-2AA0

medial exposure)
for SIPLUS CPU 1516-3 PN/DP;
spare part
Further accessories
See SIMATIC S7-1500,

Standard CPUs,
4/9
Siemens AG 2014
SIMATIC S7-1500
Fail-safe CPUs
Overview CPU 1516F-3 PN/DP
Overview CPU 1518F-4 PN/DP
The CPU with a large program and data memory in the

S7-1500 controller product range for failsafe applications with
high requirements regarding program scope and networking.
distributed I/O.
Supports PROFIsafe in centralized and distributed configuration.
PROFINET IO IRT interface with 2-port switch.
Additional PROFINET interface with separate IP address.
PROFINET.
PROFIBUS DP master interface.
Isochronous mode on PROFIBUS and PROFINET.
Integrated Motion Control functionalities for controlling speedcontrolled and positioning axes, support for external
encoders.
Integrated Web server with the option of creating user-defined
Web pages.
Note:
The CPU with a very large program and data memory in the
S7-1500 controller product range for failsafe applications with
highest requirements regarding program scope and
networking.
Extremely high processing speed for binary and floating-point
arithmetic.
distributed I/O.
Supports PROFIsafe in centralized and distributed configuration.
PROFINET IO IRT interface with 2-port switch.
Two additional PROFINET interfaces with separate IP
addresses.
PROFINET.
PROFIBUS DP master interface.
Isochronous mode on PROFIBUS and PROFINET.
Integrated Web server with the option of creating user-defined
Web pages.
Note:
SIMATIC Memory Card required for operation of the CPU.
6ES7516-3FN00-0AB0
6ES7518-4FP00-0AB0
CPU 1516F-3 PN/DP
CPU 1518F-4PN/DP
General information
Engineering with
STEP 7 TIA Portal can be configured/integrated as V13
of version
V13
Display
Screen diagonal (cm)
6.1 cm
6.1 cm
Supply voltage
24 V DC
24 V DC
Power losses
Power loss, typ.
7W
24 W
Memory
Work memory
integrated (for program)
integrated (for data)
1.5 Mbyte
5 Mbyte
4.5 Mbyte
10 Mbyte
Load memory
Plug-in (SIMATIC Memory Card), max.
32 Gbyte
32 Gbyte

10 ns
1 ns
12 ns
2 ns
16 ns
2 ns
64 ns
6 ns

S7 counter
Number
2 048
2 048
IEC counter
Number
4/10
Siemens AG 2014
SIMATIC S7-1500
Fail-safe CPUs

6ES7516-3FN00-0AB0
6ES7518-4FP00-0AB0
CPU 1516F-3 PN/DP
CPU 1518F-4PN/DP
S7 times
Number
2 048
2 048
IEC timer
Number

Flag
Number, max.
16 kbyte
16 kbyte
Address area
I/O address area
Inputs
Outputs


Time of day
Clock
Type
Hardware clock
Hardware clock
2
Yes
Yes
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1
No
Yes
1
No
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
1
No
Yes
Interfaces
1st interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- Web server
- Media redundancy
2nd interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- Web server
3rd interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
- RS 485
Protocols
- Web server
- PROFIBUS DP slave
Yes
Yes
Yes
No
4th interface
Interface types
- Number of ports
- RS 485
Protocols
- PROFIBUS DP slave
Protocols
Number of connections, max.
No
No
Yes
Yes
Yes
1
Yes
Yes
Yes
No
256
384
4/11
Siemens AG 2014
SIMATIC S7-1500
Fail-safe CPUs

6ES7516-3FN00-0AB0
6ES7518-4FP00-0AB0
CPU 1516F-3 PN/DP
CPU 1518F-4PN/DP
256
64
512
64
125
125
Isochronous mode
Isochronous operation (application synchronized up Yes
to terminal)
Yes
Services
- Max. number of connectable IO devices for RT
- Number of IO Devices with IRT and the option
"high performance", max.
PROFIBUS
Services
- Number of DP slaves
supported technology objects

Motion
Speed-controlled axis
- Number of speed-controlled axes, max.
Yes
Yes







optimization
valves

optimization
valves
Yes
Yes
0 C
0 C
0 C
0 C
Configuration
programming
- LAD
- FBD
- STL
- SCL
- GRAPH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Know-how protection
User program protection
Copy protection
Block protection
Yes
Yes
Yes
Yes
Yes
Yes
Access protection
Password for display
Protection level: Write protection
Protection level: Read/write protection
Protection level: Complete protection
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
70 mm
175 mm
Height
147 mm
147 mm
Depth
129 mm
129 mm
Weights
Weight, approx.
845 g
1 988 g
Positioning axis
- Number of positioning axes, max.
External encoders
- Number of external encoders, max.
Controller
PID_Compact
PID_3Step
Counting and measuring
High-speed counter
Ambient conditions
4/12
Siemens AG 2014
SIMATIC S7-1500
Fail-safe CPUs
Ordering data
CPU 1516F-3 PN/DP
Article No.
6ES7516-3FN00-0AB0
Fail-safe CPU, 1.5 MB RAM

for program, 5 MB for data,
PROFINET IO IRT interface,
PROFINET/PROFIBUS interface;
CPU 1518F-4 PN/DP
Article No.
PROFIBUS FC Standard Cable GP
6ES7518-4FP00-0AB0
PROFIBUS FC Robust Cable
Fail-safe CPU, 4.5 MB RAM

for program, 10 MB for data,
PROFINET IO IRT interface,
2 PROFINET interfaces, PROFIBUS
interface; SIMATIC Memory Card
required
2-wire, shielded;
quantity 20 m
Accessories
2-wire, shielded;
quantity 20 m
PROFIBUS FC Flexible Cable
SIMATIC memory card

4 MB
6ES7954-8LC02-0AA0
12 MB
6ES7954-8LE02-0AA0
24 MB
6ES7954-8LF02-0AA0
2 GB
6ES7954-8LP01-0AA0

elements
160 mm
482 mm
530 mm
830 mm
separately
2000 mm
6ES7590-1AB60-0AA0
6ES7590-1AE80-0AA0
6ES7590-1AF30-0AA0
6ES7590-1AJ30-0AA0
6ES7590-1BC00-0AA0
6ES7590-5AA00-0AA0
6XV1830-0JH10
6XV1831-2K
PROFIBUS FC Trailing Cable

2-wire, shielded;
quantity 20 m
Sheath color: Petrol
6XV1830-3EH10
Sheath color: Violet
6XV1831-2L
PROFIBUS FC Food Cable
6XV1830-0GH10
2-wire, shielded;
quantity 20 m
PROFIBUS FC Ground Cable
6XV1830-3FH10
2-wire, shielded;
quantity 20 m
PROFIBUS FC FRNC Cable GP
20 units
6XV1830-0LH10
2-wire, shielded, flame-retardant,

with copolymer outer sheath FRNC;
quantity 20 m
Power supply
For supplying the backplane bus of
the S7-1500
6ES7505-0KA00-0AB0

power 60 W
6ES7505-0RA00-0AB0

power 60 W
6ES7507-0RA00-0AB0

stripping of PROFIBUS
FastConnect bus cables
Power connector
6ES7590-8AA00-0AA0
IE FC RJ45 plugs
24 V DC/3A
6EP1332-4BA00

installation cables
24 V DC/8A
6EP1333-4BA00
IE FC RJ45 Plug 180

Load power supply

6XV1830-0EH10

for fast mounting, 2-core, shielded;
quantity 20 m
Stripping Tool
6GK1905-6AA00
180 cable outlet
6ES7193-4JB00-0AA0
PROFIBUS FastConnect bus

connector RS485 with 90 cable
outlet
with insulation displacement,
without PG interface, grounding
1 unit
6ES7972-0BA70-0XA0
with PG interface, grounding

1 unit
6ES7972-0BB70-0XA0
1 unit
6GK1901-1BB10-2AA0
10 units
6GK1901-1BB10-2AB0
50 units
6GK1901-1BB10-2AE0
6XV1840-2AH10

RJ45/ IE FC RJ45 Plug; PROFINETcompliant; with UL approval;
quantity 20 m
4/13
Siemens AG 2014
SIMATIC S7-1500
Fail-safe CPUs
Ordering data
(Type C)
Article No.
6XV1840-3AH10

RJ45/ IE FC RJ45 Plug 180/90 for
use as trailing cable; PROFINETcompatible; with UL approval;
quantity 20 m
(Type B)
6XV1840-4AH10

with marine approval,
quantity 20 m
6GK1901-1GA00

cables
Display
6ES7591-1BA00-0AA0
For CPU 1516-3 PN/DP,

CPU 1518-4 PN/DP; spare part
Article No.
Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish
Floating License
6ES7822-1AA03-0YA5

Floating License,
software download
6ES7822-1AE03-0YA5

STEP 7 Safety Advanced V13
Task:
Engineering tool for configuring
fail-safe user programs for
SIMATIC S7-1500F, S7-300F,
S7-400F, WinAC RTX F, ET200SP,
ET 200S, ET 200M, ET 200iSP,
ET 200pro, ET 200eco
Requirement:
Floating License for 1 user
6ES7833-1FA13-0YA5
Floating License for 1 user, license

key download without software or
documentation1);
email address required for delivery
6ES7833-1FA13-0YH5
1)
4/14

Siemens AG 2014
SIMATIC S7-1500
Digital modules
Overview
16 and 32-channel digital input modules
task
35 mm wide modules with parameters and diagnostic
functions
25 mm wide modules for use in tight spaces:
particularly economical, without parameters or diagnostic
functions
6ES7521-1BH00-0AB0
DI 16x24 V DC HF
6ES7521-1BL00-0AB0
DI 32x24 V DC HF
6ES7521-1BH50-0AA0
DI 16x24 V DC SRC BA
6ES7521-1FH00-0AA0
DI 16x230 V AC BA
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
V12 / V12
V12 / V12
V12 / V12
V12 / V12
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Operating mode
MSI
Yes
Yes
Yes
Yes
Supply voltage
DC
DC
Rated value (DC)
24 V
24 V
Reverse polarity protection
Yes
Yes
Digital inputs
16
32
16
16
m/p-reading
p-reading
p-reading
m-reading
p-reading
General information
Product function
I&M data
Engineering with
STEP 7 TIA Portal can be
configured/integrated as of
version
STEP 7 can be
version
PROFINET as of GSD
version/GSD revision
Input characteristic curve in

accordance with IEC 61131,
type 1
accordance with IEC 61131,
type 3
Input voltage
Type of input voltage
Rated value, AC
Rated value, DC
for signal "0"
for signal "1"
Input current
for signal "1", typ.
Input delay (for rated value of
input voltage)
for standard inputs
- Parameterizable
for interrupt inputs
- Parameterizable
Yes
Yes
Yes
Yes
DC
DC
DC
24 V
-30 to +5 V
11 to 30 V
24 V
-30 to +5 V
11 to 30 V
24 V
30 to -5 V
-11 to -30 V
2.5 mA
2.5 mA
4.5 mA
AC
230 V; 120/230 V AC; 60/50 Hz
0 to 40 V AC
79 to 264 V AC
11 mA; At 230 V AC and 5.5
mA at 120 V AC
Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / No
12.8 / 20 ms
12.8 / 20 ms
No
Yes
No
Yes
No
4/15
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7521-1BH00-0AB0
DI 16x24 V DC HF
6ES7521-1BL00-0AB0
DI 32x24 V DC HF
6ES7521-1BH50-0AA0
6ES7521-1FH00-0AA0
DI 16x230 V AC BA
Cable length
Cable length, shielded, max. 1 000 m
Cable length unshielded,
600 m
max.
1 000 m
600 m
1 000 m
600 m
1 000 m
600 m
Encoder
Connectable encoders
2-wire sensor
- Permissible quiescent
current (2-wire sensor),
max.
Yes
1.5 mA
Yes
1.5 mA
Yes
1.5 mA
Yes
2 mA
Isochronous mode
Isochronous operation (application synchronized up to
terminal)
Yes
Yes
No
No
Filtering and processing time

(TCI), min.
80 s; At 50 s filter time
80 s; At 50 s filter time
Bus cycle time (TDP), min.
250 s
250 s
Interrupts/diagnostics/status
information
Alarms
Diagnostic alarm
Yes
Hardware interrupt
Yes
Yes
Yes
No
No
No
No
Diagnostic messages
Diagnostics
Wire break
Short circuit
Fuse blown
Yes
Yes
Yes; to I < 350 A
No
No
Yes
Yes
Yes; to I < 350 A
No
No
No
No
No
No
No
No
No
No
No

RUN LED
ERROR LED
Channel status display
for channel diagnostics
for module diagnostics
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED
Yes; Red LED
Yes; Red LED
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED
Yes; Red LED
Yes; Red LED
Yes; Green LED

Yes; Red LED
No
Yes; Green LED
No
No
Yes; Green LED

Yes; Red LED
No
Yes; Green LED
No
Yes; Red LED
Yes
Yes
Yes
Yes
Isolation
Isolation checked with
707 V DC (type test)
2500 V DC
Decentralized operation
Prioritized startup
Yes
Yes
Yes
Yes
Dimensions
Width
35 mm
35 mm
35 mm
35 mm
Height
147 mm
147 mm
147 mm
147 mm
Depth
129 mm
129 mm
129 mm
129 mm
Weights
Weight, approx.
240 g
260 g
230 g
300 g
Galvanic isolation
Electrical isolation channels
between the channels and
the backplane bus
4/16
Siemens AG 2014
SIMATIC S7-1500
Digital modules

General information
Product function
I&M data
6ES7521-1BH10-0AA0
DI 16 x 24 V DC BA
6ES7521-1BL10-0AA0
DI 32 x 24 V DC BA
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal can be configured/integrated as V13 / V13
of version
STEP 7 can be configured/integrated as of version V5.5 SP3 / PROFINET as of GSD version/GSD revision
V2.3 / -
V13 / V13
V5.5 SP3 / V2.3 / -
Operating mode
MSI
Yes
Yes
Supply voltage
DC
DC
Rated value (DC)
24 V
24 V
Digital inputs
16
32
m/p-reading
p-reading
p-reading
Input characteristic curve in accordance with IEC

61131, type 3
Yes
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
24 V
-30 to +5 V
11 to 30 V
24 V
-30 to +5 V
11 to 30 V
Input current
2.7 mA
2.7 mA
No
No
No
No
1 000 m
600 m
1 000 m
600 m
Yes
1.5 mA
Yes
1.5 mA
Input delay (for rated value of input voltage)

for standard inputs
- Parameterizable
- Parameterizable
Cable length
Cable length, shielded, max.
Cable length unshielded, max.
Encoder
2-wire sensor
- Permissible quiescent current (2-wire sensor),
max.
Isochronous mode
Isochronous operation (application synchronized up No
to terminal)
No
Alarms
Diagnostic alarm
Hardware interrupt
No
No
No
No
Diagnostic messages
Diagnostics
Wire break
Short circuit
Fuse blown
No
No
No
No
No
No
No
No
No
No

RUN LED
ERROR LED
MAINT LED
Yes; Green LED

Yes; Red LED
No
No
Yes; Green LED
No
No
Yes; Green LED

Yes; Red LED
No
No
Yes; Green LED
No
No
4/17
Siemens AG 2014
SIMATIC S7-1500
Digital modules
6ES7521-1BH10-0AA0
DI 16 x 24 V DC BA
6ES7521-1BL10-0AA0
DI 32 x 24 V DC BA
Galvanic isolation
between the channels and the backplane bus
Yes
Yes
Isolation
Prioritized startup
Yes
Yes
Dimensions
Width
25 mm
25 mm
Height
147 mm
147 mm
Depth
129 mm
129 mm
Weights
Weight, approx.
230 g
260 g
Ordering data
Article No.
Article No.
Accessories
Module width 35 mm;

with parameters and diagnostic
functions
Front connectors

parameterizable diagnostics and
hardware interrupts
6ES7521-1BH00-0AB0

hardware interrupts
6ES7521-1BL00-0AB0

input delay 3.2 ms
6ES7521-1BH50-0AA0
16 inputs, 230 V AC, isolated,

input delay 20 ms
6ES7521-1FH00-0AA0
For 35 mm modules;
including four potential bridges,
cable ties and individual labeling
strips, 40-pin
Screw terminals
Push-in
6ES7592-1AM00-0XB0
6ES7592-1BM00-0XB0
For 25 mm modules;
including cable ties and individual
labeling strips; push-in terminal
40-pin; spare part
6ES7592-1BM00-0XA0
Potential bridges for front

connectors
6ES7592-3AA00-0AA0
20 units; spare part
Module width 25 mm; without

parameters or diagnostic functions;
front connector (push-in) included
in scope of delivery
DIN A4 labeling sheets
16 inputs, 24 V DC, isolated
6ES7521-1BH10-0AA0
32 inputs, 24 V DC, isolated
6ES7521-1BL10-0AA0
For 35 mm modules;
10 sheets with 10 labeling strips
each for I/O modules; perforated,
Al gray
6ES7592-2AX00-0AA0
For 25 mm modules;
Al gray
6ES7592-1AX00-0AA0
U connector
6ES7590-0AA00-0AA0
5 units; spare part

Universal front door for I/O
modules
4/18
For 35 mm modules;
5 front doors; with 5 labeling strips
(front) and 5 cabling diagrams per
front door; spare part
6ES7528-0AA00-7AA0
For 25 mm modules;
6ES7528-0AA00-0AA0
Siemens AG 2014
SIMATIC S7-1500
Digital modules
Overview
8, 16 and 32-channel digital output modules
task
outputs
35 mm wide modules with parameters and diagnostic
functions
25 mm wide modules for use in tight spaces: particularly
economical, without parameters or diagnostic functions
6ES7522-1BH00-0AB0
DQ 16x24VDC/0.5A ST
6ES7522-1BL00-0AB0
6ES7522-1BF00-0AB0
DQ 32x24V DC/0.5 A ST DQ 8x24VDC/2A HF
6ES7522-5HF00-0AB0
DQ 8x230 V AC/5 A ST
(relay)
6ES7522-5FF00-0AB0
DQ 8x230 V AC/2A ST
(triac)
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
V12 / V12
V12 / V12
V12 / V12
V12 / V12
V12 / V12
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Operating mode
MSO
Yes
Yes
Yes
Yes
Yes
Supply voltage
DC
DC
DC
DC
Rated value (DC)
24 V
24 V
24 V
24 V
Reverse polarity
protection
Yes; through internal

protection with 7 A per
group

group

group
Yes
Transistor
Transistor
Transistor
Relays
Triac
32
General information
Product function
I&M data
Engineering with
STEP 7 TIA Portal can
be
configured/integrated
as of version
STEP 7 can be
configured/integrated
as of version
PROFINET as of GSD
Digital outputs
Type of digital output
Number of digital outputs 16

Current-sinking
Yes
Current-sourcing
Yes
Yes
Yes
Yes
Yes
Digital outputs, configurable
Yes
Yes
Yes
Yes
Yes
Short-circuit protection
Yes;
Clocked electronically
Yes;
Yes;
No
No
Limitation of inductive
shutdown voltage to
L+ (-53 V)
L+ (-53 V)
-17 V
Yes
Yes
Controlling a digital input Yes
possible
4/19
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7522-1BH00-0AB0
DQ 16x24VDC/0.5A ST
Switching capacity of the
outputs
with resistive load, max. 0.5 A
on lamp load, max.
5W
6ES7522-1BL00-0AB0
6ES7522-1BF00-0AB0
0.5 A
5W
2A
10 W
Low energy/fluorescent
lamps with electronic
control gear
Fluorescent tubes,
conventionally compensated
Fluorescent tubes,
uncompensated
6ES7522-5HF00-0AB0
(relay)
1 500 W; 10,000
operating cycles
10 X 58 W (25,000
operating cycles)
6ES7522-5FF00-0AB0
DQ 8x230 V AC/2A ST
(triac)
2A
50 W
1 X 58 W (25,000
operating cycles)
10 X 58 W (25,000
operating cycles)
Load resistance range

lower limit
upper limit
48
12 k
48
12 k
12
4 k
Output voltage
Type of output voltage
for signal "1", min.
DC
L+ (-0.8 V)
DC
L+ (-0.8 V)
DC
L+ (-0.8 V)
0.5 A
0.5 mA
2A
0.5 mA
100 s
500 s
100 s
500 s
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
No
No
Yes
100 Hz
0.5 Hz; to IEC 947-5-1,
DC-13
10 Hz
100 Hz
0.5 Hz; to IEC 947-5-1,
DC-13
10 Hz
2 Hz
0.5 Hz
10 Hz
0.5 Hz
2 Hz
1 Hz
0.5 A; see additional

description in the manual
4 A; see additional
16 A; see additional
2 A; see additional
8 A; see additional
8 A; see additional
8 A; see additional
2 A; see additional
2 A; see additional
Output current
for signal "1" rated value 0.5 A
for signal "0" residual
0.5 mA
current, max.
Output delay with
resistive load
"0" to "1", max.
"1" to "0", max.
100 s
500 s
Parallel switching of
2 outputs
for logic links
Yes
No
for increased power
for redundant control of Yes
a load
Switching frequency
with resistive load, max.
with inductive load,
max.
on lamp load, max.
100 Hz
0.5 Hz; to IEC 947-5-1,
DC-13
10 Hz
Aggregate current of the

outputs
Max. current per
0.5 A; see additional
channel
Max. current per group 4 A; see additional
Max. current per module 8 A; see additional
4/20
AC
L1 (-1.5 V) at maximum
output current; L1 (-8.5 V)
at minimum output
current
5A
0A
2A
2 mA
1 AC cycle
1 AC cycle
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7522-1BH00-0AB0
DQ 16x24VDC/0.5A ST
6ES7522-1BL00-0AB0
6ES7522-1BF00-0AB0
Relay outputs
Number of relay outputs
Rated input voltage of
relay coil L+ (DC)
Current consumption of
relays (coil current of all
relays), max.
external protection for
relay outputs
6ES7522-5HF00-0AB0
(relay)
6ES7522-5FF00-0AB0
DQ 8x230 V AC/2A ST
(triac)
8
24 V
80 mA
With miniature circuit

breaker with characteristic B for: cos 1.0: 600
A cos 0.5 ... 0.7: 900 A
with 8 A Diazed fuse:
1000 A
No
Contact connection
(internal)
Size of motor starters
according to NEMA,
max.
Number of operating
cycles, max.
Relay approved acc. to
UL 508
4 000 000; see additional

Yes; 250 V AC/5 A g.p.;
120 V AC TV-4 tungsten;
A300, R300
Switching capacity of
contacts
- with inductive load,
max.
- with resistive load,
max.
see additional
see additional
Triac outputs
according to NEMA,
max.
Cable length
Cable length, shielded, 1 000 m
max.
Cable length
600 m
unshielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
600 m
600 m
600 m
600 m
Yes
Yes
No
No
No
Execution and activation

time (TCO), min.
70 s
70 s
Bus cycle time (TDP),

min.
250 s
250 s
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
Yes
No
No
Yes
No
No
No
No
No
No
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED

Yes; Red LED
Yes; Green LED
Yes; Green LED

Yes; Red LED
No
Yes; Green LED

No
Yes; Red LED
Yes; Green LED

No
Yes; Red LED
Yes; Green LED

Yes; Red LED
Yes; Red LED
Yes; Green LED

No
Yes; Red LED
Yes; Green LED

No
Yes; Red LED
Isochronous mode
(application synchronized up to terminal)
Interrupts/
diagnostics/
status information
Substitute values
connectable
Alarms
Diagnostic alarm
Diagnostic messages
Diagnostics
voltage
Wire break
Short circuit
Fuse blown
LED
RUN LED
ERROR LED
voltage
4/21
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7522-1BH00-0AB0
DQ 16x24VDC/0.5A ST
6ES7522-1BL00-0AB0
6ES7522-1BF00-0AB0
6ES7522-5HF00-0AB0
(relay)
6ES7522-5FF00-0AB0
DQ 8x230 V AC/2A ST
(triac)
Yes
Yes
Yes
Yes
Between the channels:

2500 V DC
2500 V DC; between the
channels and backplane
bus: 2500 V DC; between
L+ backplane bus 707 V
DC (type test)
Prioritized startup
Yes
Yes
Yes
Yes
Yes
Dimensions
Width
35 mm
35 mm
35 mm
35 mm
35 mm
Height
147 mm
147 mm
147 mm
147 mm
147 mm
Depth
129 mm
129 mm
129 mm
129 mm
129 mm
Weights
Weight, approx.
230 g
280 g
240 g
350 g
290 g
Galvanic isolation
Electrical isolation
channels
between the channels Yes
and the backplane bus
Isolation
General information
Product function
I&M data
6ES7522-1BH10-0AA0
DQ 16 x 24 V DC / 0.5 A BA
6ES7522-1BL10-0AA0
DQ 32 x 24 V DC / 0.5 A BA
Yes
Yes
Engineering with
STEP 7 TIA Portal can be configured/integrated as V13 / V13
of version
STEP 7 can be configured/integrated as of version V5.5 SP3 / PROFINET as of GSD version/GSD revision
V2.3 / -
V13 / V13
V5.5 SP3 / V2.3 / -
Operating mode
MSO
Yes
Yes
Supply voltage
DC
DC
Rated value (DC)
24 V
24 V
Yes; through internal protection with 7 A per group
Yes; through internal protection with 7 A per group
Digital outputs
Transistor
Transistor
16
32
Current-sourcing
Yes
Yes
No
No
Yes
Yes
Limitation of inductive shutdown voltage to
L+ (-53 V)
L+ (-53 V)
Controlling a digital input
Yes
Yes
Switching capacity of the outputs

on lamp load, max.
0.5 A
5W
0.5 A
5W

lower limit
upper limit
48
12 k
48
12 k
Output voltage
DC
L+ (-0.8 V)
DC
L+ (-0.8 V)
Output current
for signal "1" rated value
for signal "0" residual current, max.
0.5 A
0.5 mA
0.5 A
0.5 mA
Output delay with resistive load

"0" to "1", max.
"1" to "0", max.
100 s
500 s
100 s
500 s
4/22
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7522-1BH10-0AA0
DQ 16 x 24 V DC / 0.5 A BA
6ES7522-1BL10-0AA0
DQ 32 x 24 V DC / 0.5 A BA
Parallel switching of 2 outputs

for logic links
for increased power
for redundant control of a load
Yes
No
Yes
Yes
No
Yes
Switching frequency
with inductive load, max.
on lamp load, max.
100 Hz
0.5 Hz; to IEC 947-5-1, DC-13
10 Hz
100 Hz
0.5 Hz; to IEC 947-5-1, DC-13
10 Hz
Aggregate current of the outputs

Max. current per channel
Max. current per group
Max. current per module
0.5 A; see additional description in the manual

4 A; see additional description in the manual
0.5 A; see additional description in the manual

Cable length
1 000 m
600 m
1 000 m
600 m
Substitute values connectable
No
No
Alarms
Diagnostic alarm
No
No
Diagnostic messages
Diagnostics
No
No

RUN LED
ERROR LED
MAINT LED
Yes; Green LED

Yes; Red LED
No
Yes; Green LED
Yes; Green LED
Yes; Green LED

Yes; Red LED
No
Yes; Green LED
Yes; Green LED
Galvanic isolation
between the channels and the backplane bus
Yes
Yes
Isolation
Prioritized startup
Yes
Yes
Dimensions
Width
25 mm
25 mm
Height
147 mm
147 mm
Depth
129 mm
129 mm
Weights
Weight, approx.
230 g
280 g
4/23
Siemens AG 2014
SIMATIC S7-1500
Digital modules
Ordering data
Article No.
Article No.
Accessories
Module width 35 mm;

with parameters and diagnostic
functions
Front connectors
8 outputs, 24 V DC; 2 A, isolated
6ES7522-1BF00-0AB0
16 outputs, 24 V DC; 0.5 A, isolated
6ES7522-1BH00-0AB0
6ES7522-1BL00-0AB0
8 relay outputs, 230 V AC, 5 A
6ES7522-5HF00-0AB0
8 outputs (triac), 230 V AC, 2 A
6ES7522-5FF00-0AB0

For 35 mm modules;
strips, 40-pin
Screw terminals
Push-in
6ES7592-1AM00-0XB0
6ES7592-1BM00-0XB0
For 25 mm modules;
including cable ties and individu
al labeling strips; push-in terminal
40-pin; spare part
6ES7592-1BM00-0XA0

connectors
6ES7592-3AA00-0AA0
6ES7 522-1BH10-0AA0
6ES7 522-1BL10-0AA0

For 35 mm modules;
Al gray
6ES7592-2AX00-0AA0
For 25 mm modules;
Al gray
6ES7592-1AX00-0AA0
U connector
6ES7590-0AA00-0AA0
5 units; spare part

Universal front door
for I/O modules
4/24
For 35 mm modules;
6ES7528-0AA00-7AA0
For 25 mm modules;
6ES7528-0AA00-0AA0
Siemens AG 2014
SIMATIC S7-1500
Digital modules
Overview
6ES7523-1BL00-0AA0
DI 16x24VDC /
DQ16x24VDC/0.5A BA
Input delay
(for rated value of input voltage)
for standard inputs
- Parameterizable
- Parameterizable
No
No
Cable length
1 000 m
600 m
Digital outputs
transistor
16
Current-sourcing
Yes
Yes
Limitation of inductive shutdown

voltage to
L+ (-53 V)
Yes

on lamp load, max.
0.5 A
5W

lower limit
upper limit
48
12 k
Output voltage
DC
L+ (-0.8 V)
6ES7523-1BL00-0AA0
DI 16x24VDC /
DQ16x24VDC/0.5A BA
Output current
0.5 A
0.5 mA
Yes; I&M0 to I&M3

"0" to "1", max.
"1" to "0", max.
100 s
500 s
V5.5 SP3 / -

for logic links
for increased power
for redundant control of a load
Yes
No
Yes
Operating mode
MSI
MSO
Yes
Yes
Switching frequency
on lamp load, max.
100 Hz
0.5 Hz
10 Hz
Supply voltage
DC

Rated value (DC)
24 V
Yes; through internal protection

with 7 A per group
16 digital inputs and 16 digital outputs

task
and outputs
For use in the tightest spaces: particularly economical, without
parameters or diagnostic functions
General information
Product function
I&M data
Engineering with
configured/integrated as of version
STEP 7 can be
V13 / V13
Digital inputs
16
m/p-reading
p-reading
Input characteristic curve in accordance with IEC 61131, type 3
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
24 V
-30 to +5 V
11 to 30 V
Input current
2.7 mA
Max. current per group

Cable length
Encoder
2-wire sensor
- Permissible quiescent current
(2-wire sensor), max.
Isochronous mode
Isochronous operation (application
synchronized up to terminal)
0.5 A; see additional description in

the manual
4 A; see additional description in the
manual
8 A; see additional description in the
manual
1 000 m
600 m
Yes
1.5 mA
No
4/25
Siemens AG 2014
SIMATIC S7-1500
Digital modules

6ES7523-1BL00-0AA0
DI 16x24VDC /
DQ16x24VDC/0.5A BA
Interrupts/diagnostics/
status information
No
Alarms
Diagnostic alarm
Hardware interrupt
No
No
Diagnostic messages
Diagnostics
Wire break
Short circuit
No
No
No
No

RUN LED
ERROR LED
MAINT LED
Yes; Green LED

Yes; Red LED
No
Yes; Green LED
Yes; Green LED
No
No
Galvanic isolation
between the channels and the
backplane bus
Article No.
SM 523 digital input/output

module
16 inputs, 24 V DC, isolated;
6ES7523-1BL00-0AA0
Accessories
Front connectors
Yes
For 25 mm modules;
labeling strips; push-in terminal
40-pin; spare part
6ES7592-1BM00-0XA0

connectors
6ES7592-3AA00-0AA0

For 25 mm modules;
Al gray
6ES7592-1AX00-0AA0
U connector
6ES7590-0AA00-0AA0
5 units; spare part

Universal front door for I/O
modules
Isolation
Prioritized startup
Yes
Dimensions
Width
25 mm
Height
147 mm
Depth
129 mm
Weights
Weight, approx.
280 g
4/26
Ordering data
For 25 mm modules;
6ES7528-0AA00-0AA0
Siemens AG 2014
SIMATIC S7-1500
Overview
16 and 32-channel digital input modules
task
Note:
6AG1521-1BH00-7AB0
DI 16x24 V DC HF
6AG1521-1BL00-7AB0
DI 32x24 V DC HF
6AG1521-1BH50-7AA0
6AG1521-1FH00-7AA0
DI 16x230 V AC BA
Based on
6ES7521-1BH00-0AB0
6ES7521-1BL00-0AB0
6ES7521-1BH50-0AA0
6ES7521-1FH00-0AA0
Ambient conditions
-40 C; = Tmin
70 C; = Tmax

-40 C; = Tmin
40 C; = Tmax
-40 C; = Tmin
70 C; = Tmax; > +60 C
number of simultaneously
controllable inputs max. 16
-40 C; = Tmin
40 C; = Tmax
-40 C; = Tmin
70 C; = Tmax; > +60 C
-40 C; = Tmin
40 C; = Tmax
-40 C; = Tmin
70 C; = Tmax; > +60 C
-40 C; = Tmin
40 C; = Tmax

Relative to ambient temper- Tmin ... Tmax at
Tmin ... Tmax at
Tmin ... Tmax at
ature-atmospheric pressure- 1080 hPa ... 795 hPa
1080 hPa ... 795 hPa
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
(-1000 m ... +2000 m) //
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
795 hPa ... 658 hPa
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
(+2000 m ... +3500 m) //
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
658 hPa ... 540 hPa
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
(+3500 m ... +5000 m)
(+3500 m ... +5000 m)
Relative humidity
- With condensation, tested 100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
in accordance with
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
Ordering data
Article No.
Article No.
SIPLUS SM 521 digital input

modules

input delay 3.2 ms
6AG1521-1BH50-7AA0

medial exposure)
16 inputs, 230 V AC, isolated,

input delay 20 ms
6AG1521-1FH00-7AA0
Accessories
See SIMATIC S7-1500

SM 521 digital input
modules, page 4/18

hardware interrupts
6AG1521-1BH00-7AB0

hardware interrupts
6AG1521-1BL00-7AB0
4/27
Siemens AG 2014
SIMATIC S7-1500
Overview
16 and 32-channel digital output modules
task
outputs
Note:
6AG1522-1BF00-7AB0
DQ 8x24VDC/2A HF
6AG1522-1BH00-7AB0
DQ 16x24VDC/0.5A ST
6AG1522-1BL00-7AB0
6AG1522-5HF00-2AB0
DQ 32x24V DC/0.5 A ST DQ 8x230 V AC/5 A ST
(relay)
6AG1522-5FF00-7AB0
DQ 8x230 V AC/2A ST
(triac)
Based on
6ES7522-1BF00-0AB0
6ES7522-1BH00-0AB0
6ES7522-1BL00-0AB0
6ES7522-5HF00-0AB0
6ES7522-5FF00-0AB0
Ambient conditions
horizontal installation,
min.
max.
-40 C; = Tmin
-25 C; = Tmin
-40 C; = Tmin
-25 C; = Tmin
-40 C; = Tmin
70 C; = Tmax; > +60 C 70 C; = Tmax

Number of simultaneously controllable outputs
max. 8x 0.5 A, max. total
current per group 2 A
-25 C; = Tmin
-40 C; = Tmin
40 C; = Tmax
50 C; = Tmax
60 C; = Tmax
70 C; = Tmax; > +60 C

controllable outputs max.
8x 0.25 A, max. total
current 2 A
-40 C; = Tmin
40 C; = Tmax
70 C; = Tmax; > +60 C

Number of simultaneously controllable outputs
max. 8x 0.5 A, max. total
current per group 2 A
vertical installation, min. -40 C; = Tmin
vertical installation,
40 C; = Tmax
max.

Relative to ambient
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
-25 C; = Tmin
40 C; = Tmax
Tmin ... Tmax at

Tmin ... Tmax at
1080 hPa ... 795 hPa
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) // (-1000 m ... +2000 m)
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
Relative humidity
tested in accordance
with IEC 60068-2-38,
maximum
Resistance
substances/conformit
y with EN 60721-3-3
y with EN 60721-3-3
y with EN 60721-3-3
4/28
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must
remain on the unused interfaces during operation!
Siemens AG 2014
SIMATIC S7-1500
Ordering data
Article No.
SIPLUS SM 522 digital output

modules
medial exposure)
8 outputs, 24 V DC; 2 A, isolated
6AG1522-1BF00-7AB0
6AG1522-1BH00-7AB0
6AG1522-1BL00-7AB0
8 relay outputs, 230 V AC, 5 A
6AG1522-5HF00-2AB0
8 outputs (triac), 230 V AC, 2 A
6AG1522-5FF00-7AB0
Accessories
See SIMATIC S7-1500

SM 522 digital output
modules, page 4/24
4/29
Siemens AG 2014
SIMATIC S7-1500
Overview
8-channel analog input modules
Optionally with extremely short conversion times
For the connection of analog sensors without additional
amplifiers
Note:
Based on
Ambient conditions
altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data
6AG1531-7NF10-7AB0
AI 8xU/I HS
6AG1531-7KF00-7AB0
AI 8xU/I/RTD/TC ST
6ES7531-7NF10-0AB0
6ES7531-7KF00-0AB0
-40 C; = Tmin; startup @ -25 C

70 C; = Tmax; > +60 C max. 4x 20 mA or 4x 10 V
permissible
40 C; = Tmax
-25 C; = Tmin
70 C; = Tmax

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa (+2000 m ... +3500 m) //
(+3500 m ... +5000 m)

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa (+2000 m ... +3500 m) //
(+3500 m ... +5000 m)
100 %; RH incl. condensation/frost (no commissioning

under condensation conditions)
100 %; RH incl. condensation/frost (no commissioning

under condensation conditions)
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna). The supplied connector covers must
Yes; Class 3C4 (RH < 75%) incl. salt spray according to
EN 60068-2-52 (degree of severity 3). The supplied
connector covers must remain on the unused interfaces
during operation!
Yes; Class 3S4 incl. sand, dust. The supplied connector
covers must remain on the unused interfaces during
operation!
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna). The supplied connector covers must
Yes; Class 3C4 (RH < 75%) incl. salt spray according to
EN 60068-2-52 (degree of severity 3). The supplied
connector covers must remain on the unused interfaces
during operation!
Yes; Class 3S4 incl. sand, dust. The supplied connector
covers must remain on the unused interfaces during
operation!
Article No.
SIPLUS SM 531 analog input

modules
medial exposure)
8 analog inputs, 10 V, 5 V,
1 ... 5 V or 0/4 ... 20 mA, 20 mA,
16 bit + sign; incl. infeed element,
shield clamp, shield terminal,
labeling strips, U connector,
printed front door
4/30
-25 C; = Tmin
50 C; = Tmax
6AG1531-7NF10-7AB0
Article No.
8 analog inputs
10 V, 5 V, 2.5 V, 1 V, 500 mV,
250 mV, 80 mV, 50 mV, 1 ... 5 V,
0/4 ... 20 mA, 20 mA,
thermocouples type B, E, J, K, N, R,
S, T, resistance thermometers
Ni 100, Ni 1000, LG-Ni 1000,
Pt 100, Pt 1000, Pt 250, Pt 500,
resistors
0...150/300/600/6000 Ohm,
16 bit
6AG1531-7KF00-7AB0
Accessories

analog input modules,
Siemens AG 2014
SIMATIC S7-1500
Overview
4 and 8-channel analog output modules

Optionally with extremely short conversion times
For connecting analog actuators without additional amplifiers
Note:
6AG1532-5HD00-7AB0
AQ 4xU/I ST
6AG1532-5HF00-7AB0
AQ 8xU/I HS
Based on
6ES7532-5HD00-0AB0
6ES7532-5HF00-0AB0
Ambient conditions
-25 C; = Tmin
70 C; = Tmax; > +60 C max. 4x 10 V permissible
-25 C; = Tmin
40 C; = Tmax

70 C; = Tmax; > +60 C max. 4x 10 V permissible
40 C; = Tmax

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa (+2000 m ... +3500 m) //
(+3500 m ... +5000 m)

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa (+2000 m ... +3500 m) //
(+3500 m ... +5000 m)

Relative to ambient temperature-atmospheric
pressure-installation altitude
Relative humidity
- With condensation, tested in accordance with
Resistance
- to biologically active substances/conformity with
EN 60721-3-3

connector covers must remain on the unused interfaces during operation!
- to chemically active substances/conformity with Yes; Class 3C4 (RH < 75%) incl. salt spray
according to EN 60068-2-52 (degree of severity 3).
EN 60721-3-3
The supplied connector covers must remain on the
- to mechanically active substances/conformity
Yes; Class 3S4 incl. sand, dust. The supplied
with EN 60721-3-3
Ordering data
Article No.
SIPLUS SM 532 analog output

modules
Article No.
Accessories

medial exposure)
4 analog outputs, 10 V, 1 ... 5 V,
0 ... 10 V or 20 mA, 0/4 ... 20 mA,
16 bit
6AG1532-5HD00-7AB0
8 analog outputs, 10 V, 1 ... 5 V,

0 ... 10 V or 20 mA, 0/4 ... 20 mA,
16 bit; incl. infeed element, shield
clamp, shield terminal, labeling
strips, U connector, printed front
door
6AG1532-5HF00-7AB0

according to EN 60068-2-52 (degree of severity 3).
The supplied connector covers must remain on the
Yes; Class 3S4 incl. sand, dust. The supplied

analog output modules,
4/31
Siemens AG 2014
SIMATIC S7-1500
Technology modules
TM PosInput 2 position detection module
Overview
2-channel counting and position detection module with
RS422 interface
Extensive parameterization options for optimum task-specific
adaptation
Reduces load on controller due to preprocessing on the
module
Position detection with incremental and SSI absolute
encoders
Speed and time period measuring
Storage and comparison functions
Connection of encoders with RS422 signals or 5V-TTL signals
6ES7551-1AB00-0AB0
TM PosInput 2
General information
Product function
I&M data
Engineering with
STEP 7 can be
PROFINET as of GSD version/GSD
revision
Installation type/mounting
Type of fitting, rail mounting
Digital inputs
4; 2 per channel
Yes; I&M 0
Digital inputs, configurable
Yes
V12 SP1 / V12 SP1
Yes
V5.5 SP3 / V2.3 / -
Yes; S7-1500 mounting rail
Supply voltage
Load voltage L+
Rated value (DC)
permissible range, lower limit (DC)
24 V
19.2 V
28.8 V
Yes
Input current
75 mA; without load
Encoder supply
Number of outputs
4; One 5 V and 24 V encoder supply

per channel
5 V encoder supply
5V
Output current, max.
Yes; 5.2 V +/-2%

Yes
300 mA; Per channel
24 V encoder supply
24 V
Yes; L+ (-0.8 V)
Yes
300 mA; Per channel
Power
Power available from the backplane
bus
Power losses
Power loss, typ.
4/32
6ES7551-1AB00-0AB0
TM PosInput 2
1.3 W
5.5 W
Digital input functions, parameterizable

Gate start/stop
Freely usable digital input
Yes; only for pulse and incremental

encoders
Yes
encoders
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
Permissible voltage at input, min.
Permissible voltage at input, max.
DC
24 V
-30 to +5 V
+11 to +30 V
-30 V
30 V
Input current
2.5 mA
Capture
Synchronization
Input delay (for rated value of input

voltage)
for standard inputs
- Parameterizable
- at "0" to "1", min.
- at "1" to "0", min.
for counter/technological functions
- Parameterizable
Cable length
Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 /

3.2 / 12.8 / 20 ms
6 s; for parameterization "none"
Yes
1 000 m
600 m
Siemens AG 2014
SIMATIC S7-1500
Technology modules

6ES7551-1AB00-0AB0
TM PosInput 2
Digital outputs
Transistor
4; 2 per channel
Yes
Response threshold, typ.
Yes; electronic/thermal
1A

voltage to
L+ (-33 V)
Yes
Digital output functions, parameterizable

Switching tripped by comparison
values
Freely usable digital output
Yes
Yes

on lamp load, max.
0.5 A; Per digital output

5W

lower limit
upper limit
48
12 k
Output voltage
DC
23.2 V; L+ (-0.8 V)
Output current
for signal "1" permissible range,
max.
for signal "1" minimum load current
"0" to "1", max.
"1" to "0", max.
Switching frequency
Encoder signals, incremental encoder

(asymmetrical)
Input voltage
Input frequency, max.
Counting frequency, max.
Signal filter, can be parameterized
Incremental encoder with A/B tracks,
90 out of phase
90 out of phase and zero track
Pulse encoder
Pulse encoder with direction
Pulse encoder with one impulse
signal per count direction
Encoder signals, absolute encoder
(SSI)
Input signal
Message frame length, parameterizable
Clock frequency, max.
Binary code
Gray code

2 mA
0.5 mA
50 s
50 s
on lamp load, max.
10 kHz
0.5 Hz; Acc. to IEC 947-5-1, DC-13;
observe derating curve
10 Hz

2A
Cable length
1 000 m
600 m
Encoder
(symmetrical)
Input voltage
90 out of phase
Pulse encoder
6ES7551-1AB00-0AB0
TM PosInput 2
RS 422
1 MHz
4 MHz; with quadruple evaluation
Yes
32 m; at 1 MHz
Yes
Yes
Yes
Yes
Yes
Parity bit, parameterizable

Monoflop time
Multiturn
Singleturn
Interface types
RS422
TTL 5 V
5 V TTL (push-pull encoders only)

1 MHz
Yes
Yes
Yes
to RS-422
10 ... 40 bit
2 MHz; 125 kHz, 250 kHz, 500 kHz,
1 MHz, 1.5 MHz or 2 MHz
Yes
Yes
320 m; Cable length, RS-422 SSI
absolute encoders, Siemens type
6FX2001-5, 24 V supply: 125 kHz,
320 meters shielded, max.; 250 kHz,
60 meters shielded, max.; 1 MHz,
20 meters shielded, max. 1.5 MHz,
8 meters shielded, max.
Yes
16, 32, 48, 64 s & automatic
Yes
Yes
Yes
Yes; push-pull encoders only
Isochronous mode
Yes
Filtering and processing time (TCI),

min.
130 s; only for pulse and

incremental encoders
250 s
status information
Alarms
Diagnostic alarm
Hardware interrupt
Yes
Yes
Diagnostic messages
Wire break
Short circuit
A/B transition error at incremental
encoder
Frame error at SSI encoder
RUN LED
ERROR LED
MAINT LED
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; Green LED
Yes; Red LED
Yes; yellow LED
Yes; Green LED
Yes; Green LED
Yes; Red LED
4/33
Siemens AG 2014
SIMATIC S7-1500
Technology modules

6ES7551-1AB00-0AB0
TM PosInput 2
Number of counters
Counting functions
Can be used with TO
High_Speed_Counter
Continuous counting
Counter response
can be parameterized
Hardware gate via digital input
Software gate
Event-controlled stop
Synchronization via digital input
Counting range, parameterizable
Comparator
- Number of comparators
- Direction dependency
- Can be changed from user
program

encoders
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2; Per channel
Yes
Yes
Position detection
Incremental acquisition
Yes
Yes
Absolute acquisition
Suitable for S7-1500 Motion Control Yes
Measuring functions
Measuring time, parameterizable
Dyn. measuring time adjustment
Number of thresholds,
parameterizable
Measuring range
- Frequency measurement, min.
- Frequency measurement, max.
- Period measurement, min.
- Period measurement, max.
Accuracy
- Frequency measurement
- Speed measurement
- Cycle duration measurement
Yes
Yes
2
0.04 Hz
4 MHz
0.25 s
25 s
100 ppm; depending on measuring
interval and signal evaluation
Permissible potential difference

between different circuits
75 V DC/60 V AC (base isolation)
Isolation

4/34
to SIMATIC S7-1500
Yes
To standard PROFINET controller
Yes
Dimensions
Width
35 mm
Height
147 mm
Depth
129 mm
Weights
Weight, approx.
325 g
Ordering data
Counter and positioning module
TM PosInput 2
Article No.
6ES7551-1AB00-0AB0
With 2 channels, max. 1 MHz

counting frequency;
for SSI encoders and incremental
encoders with RS422 or
5V TTL interface
Accessories
Front connectors
For 35 mm modules;
strips, 40-pin
Screw terminals
Push-in
6ES7592-1AM00-0XB0
6ES7592-1BM00-0XB0
6ES7592-2AX00-0AA0

Al grey
U connector
6ES7590-0AA00-0AA0
5 units; spare part
Galvanic isolation
between the channels
No
Yes
backplane bus
between the channels and the load No
voltage L+
Ambient conditions
6ES7551-1AB00-0AB0
TM PosInput 2
0 C
60 C; Please note derating for
inductive loads
0 C
inductive loads
Universal front door

for I/O modules
6ES7528-0AA00-7AA0

Shielding set I/O
6ES7590-5CA00-0AA0
Infeed element, shield clamp,

and shield terminal;
5 units, spare part
Shield terminal element
6ES7590-5BA00-0AA0
Siemens AG 2014
SIMATIC S7-1500
SIPLUS technology modules
SIPLUS TM Count 2x24V counter modules
Overview
modules apart from the values listed in the table:
6AG1550-1AA00-7AB0
TM Count 2x24V
Based on
6ES7550-1AA00-0AB0
Ambient conditions

70 C; = Tmax; note derating for
inductive loads; > +60 C total
current of the encoder supply max.
0.5 A, total current of the outputs
max. 1 A
inductive loads

2-channel high-speed counter module

With comprehensive parameterization options for an optimum
adaptation to the task and reduction of control load
Speed and time period measuring
Storage and comparison functions
Connection of 24 V encoders
Note:
Ordering data
SIPLUS TM Count 2x24V
counter module

altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
Article No.
6AG1550-1AA00-7AB0

medial exposure)

(-1000 m ... +2000 m) // Tmin ...
(Tmax - 10K) at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) // Tmin ...
(Tmax - 20K) at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
EN 60721-3-3

during operation!
With 2 channels, max. 200 kHz;

for 24 V encoder
to SIMATIC S7-1500
Yes
Accessories
To standard PROFINET controller
Yes
Dimensions
Width
35 mm
Height
147 mm
Depth
129 mm
Weights
Weight, approx.
250 g

TM Count 2x24V counter module,
4/35
Siemens AG 2014
SIMATIC S7-1500
Communication
CP 1542-5
Overview
The CP 1542-5 communications processor expands the
SIMATIC S7-1500 controller with an additional PROFIBUS
connection for communication with lower-level PROFIBUS
devices in bandwidths from 9.6 kbps to 12 Mbit/s. The processor
also allows the implementation of separate PROFIBUS lines; in
other words, the control of multiple field devices via several
PROFIBUS segments. The CP 1542-5 handles all communication tasks, thus reducing the CPU load.
PROFIBUS DP master or DP slave with electrical interface for
connecting the SIMATIC S7-1500 to PROFIBUS at up to
12 Mbit/s (including 45.45 Kbit/s)
kwTz
mtz
wnVvw
z^Vz\
nprXWXWX[[
kwTt
Communication services:
PROFIBUS DP
PG/OP communication
Time synchronization
Simple programming and configuration over PROFIBUS
Cross-network PG communication using S7 routing
Module replacement without a PG
Article No.
6GK7542-5FX00-0XE0
Article No.
6GK7542-5FX00-0XE0
CP 1542-5
CP 1542-5
Transmission rate
Transmission rate at interface 1
in accordance with PROFIBUS
Design, dimensions and weight
Interfaces
Number of electrical connections at
interface 1
Design of electrical connection at
interface 1
9-pin Sub-D socket (RS485)
Supply voltage, current

consumption, power loss
Type of voltage of supply voltage
DC
Supply voltage 1
from backplane bus
15 V
Relative symmetrical tolerance at 15 V 3 %

with DC
Current consumption from backplane 0.1 A
bus at 15 V with DC typical
1.5 W
Resistive loss
Ambient temperature
for vertical installation during
operating phase
for horizontal installation during
operating phase
during storage
during transport
Comment
0 40 C
0 60 C
-40 +70 C
-40 +70 C
-
Relative humidity at 25 C without

condensation during operating
maximum
95 %
Protection class IP
IP20
4/36
Module format
Compact module S7-1500 single

width
Width
Height
Depth
0.035 m
0.142 m
0.129 m
Net weight
0.27 kg
Type of mounting S7-1500 rail

mounting
Yes
9 600 12 000 000 bit/s
Product properties, functions,

components general
Number of modules
per CPU maximum
note
8
depending on CPU type
Performance data
Performance data PROFIBUS DP
Service as DP master DPV1
Yes
Number of DP slaves on DP master

usable
32
Amount of data
of the address area of the inputs as
DP master overall
of the address area of the outputs as
DP master overall
of the address area of the inputs per
DP slave
of the address area of the outputs
per DP slave
of the address area of the diagnostic
data per DP slave
Service as DP slave
DPV0
DPV1
2 048 byte
2 048 byte
244 byte
244 byte
-
Yes
Yes
Siemens AG 2014
SIMATIC S7-1500
Communication
CP 1542-5

Article No.
6GK7542-5FX00-0XE0
CP 1542-5
Ordering data
CP 1542-5 communications
processor
Amount of data
of the address area of the inputs as 240 byte
DP slave overall
of the address area of the outputs as 240 byte
DP slave overall

electrical connection of
SIMATIC S7-1500 to PROFIBUS as
DP master or DP slave; PG/OP
communication, time synchronization, diagnostics
Performance data S7 communication
Accessories
Number of possible connections for

S7 communication
maximum
with PG connections maximum
with PG/OP connections maximum
note
connection plug RS485
16
depending on the system upper limit
Performance data multi-protocol

mode
Number of active connections with
multi-protocol mode
without DP maximum
with DP maximum
2-core bus cable, shielded,

special design for fast mounting,
delivery unit: max. 1000 m,
minimum order 20 m, sold by the
meter
TIA-Portal /
STEP 7 V12 SP1 Professional
Stripping Tool
Yes
yes, via S7-1500 CPU
4
6ES7972-0BA52-0XA0
6ES7972-0BB52-0XA0
Stripping tool for fast stripping of

the PROFIBUS FastConnect bus
cable
6XV1830-0EH10
6GK1905-6AA00
PROFIBUS bus terminal 12M
Product functions Time

Product function pass on time
synchronization
6GK7542-5FX00-0XE0
PROFIBUS FC Standard Cable
Product functions Diagnosis

Product function
note
With 90 cable outlet;

insulation displacement technology,
without programming device
interface
with programming device
interface
Product functions management,

configuration
Configuration software required
Article No.
Yes
Bus terminal for connection of

PROFIBUS stations for up to
12 Mbit/s with plug-in cable
6GK1500-0AA10
Note:
For ordering data for software and accessories,
see catalog IK PI.
4/37
Siemens AG 2014
SIMATIC S7-1500
Communication
CM 1542-1
Overview
Article No.
6GK7542-1AX00-0XE0
CM 1542-1

Ambient temperature
for vertical installation during
operating phase
for horizontal installation during
operating phase
during storage
during transport
Comment
0 40 C
0 60 C
-40 +70 C
-40 +70 C
-

maximum
95 %
Protection class IP
IP20
TCP/
UDP
PN
MRP
IT
IP-R
PG/OP
S7/S5
G_IK10_XX_10363
ISO
Communication module for connecting a SIMATIC S7-1500 to

PROFINET networks as PROFINET IO controller.
The CM 1542-1 supports the following communication services:
PG/OP communication
S7 communication
Open communication (SEND/RECEIVE, FETCH/WRITE)
PROFINET communication
IT communication;
web diagnose by means of access to the Web server of the
S7-1500 system
Article No.
6GK7542-1AX00-0XE0
CM 1542-1
Transmission rate
Transfer rate
at the interface 1
at the interface 2
10 100 Mbit/s
-
Interfaces
Number of electrical connections
at interface 1 in accordance with
Industrial Ethernet
Industrial Ethernet
Design of electrical connection
Industrial Ethernet
Industrial Ethernet
2
-
RJ45 port
-

DC
Supply voltage 1 from backplane bus 15 V

with DC
Current consumption from backplane 0.22 A
bus at 15 V with DC typical
Resistive loss
4/38
3.3 W
Module format
Compact module S7-1500 single

width
Width
Height
Depth
35 mm
142 mm
129 mm
Net weight
0.4 kg
Type of mounting S7-1500 rail

mounting
Yes

components general
Number of modules
per CPU maximum
note
8
depending on CPU type
Performance data
Performance data open communication
number of possible connections for
open communication via
SEND/RECEIVE modules
maximum
comment
Data volume
as user data per connection for open
communication by means of
SEND/RECEIVE blocks maximum
as user data per ISO connection for
open communication by means of
as user data per ISO on TCP
connection for open communication
by means of SEND/RECEIVE blocks
maximum
as user data per TCP connection for
as user data per UDP connection for
open IE communication by means of
Siemens AG 2014
SIMATIC S7-1500
Communication
CM 1542-1

Article No.
6GK7542-1AX00-0XE0
Article No.
6GK7542-1AX00-0XE0
CM 1542-1
CM 1542-1

open communication via T-modules
maximum
comment
64
Data volume as user data per ISO on 65 536 byte

TCP connection for open communication by means of T blocks maximum
Number of Multicast stations
16

S7 communication
maximum
note
64

mode
multiprotocol mode
64
Number of e-mails with 1024

characters of e-mail client maximum
Amount of data as useful data

for e-mail maximum
Storage capacity of the user memory

as flash memory file system
as RAM
additionally buffered as RAM via
central backup battery
Number of possible write cycles flash memory cells
Performance data PROFINET
communication as PN IO-Controller
Product function PROFINET IO
controller
8 Kibyte
8 Kibyte
1 433 byte
1 433 byte
256 byte
256 byte
Performance data PROFINET

communication as PN IO-Device
Performance data IT functions

Number of possible connections
as client by means of FTP maximum
as server
- by means of FTP maximum
- by means of HTTP maximum
as e-mail client maximum
Data volume
as useful data for input variables as
PROFINET IO controller maximum
as useful data for output variables
with PROFINET IO controller
maximum
as useful data for input variables per
PN IO device with PROFINET IO
controller maximum
as useful data for output variables
per PN IO device with PROFINET IO
controller maximum
as user data for input variable per
PN IO device per submodule as
as user data for output variables per
PN IO device per submodule as
Yes
Number of PN IO-Devices on
PROFINET IO-Controller usable total
128
Number of PN IO IRT-Devices on
PROFINET IO-Controller usable
64
Number of external PN IO lines with

PROFINET per rack
10
Product function PROFINET IO device Amount of data

PROFINET IO device maximum
PROFINET IO device maximum
as useful data for input variables for
each sub-module under PROFINET
IO device
as useful data for input variables for
each sub-module under PROFINET
IO device
as useful data for the consistency
area for each sub-module
Number of submodules per
PROFINET IO-Device

configuration
Product function MIB support
Yes
Protocol is supported
SNMP v1
DCP
LLDP
Yes
Yes
Yes
TIA-Portal / STEP 7 Professional V13
Identification & maintenance function

I&M0 - device-specific information Yes
I&M1 higher level desigYes
nation/location designation
Product function Web-based
diagnostics
Yes
4/39
Siemens AG 2014
SIMATIC S7-1500
Communication
CM 1542-1

Article No.
6GK7542-1AX00-0XE0
CM 1542-1
Product functions switch
Product feature switch
Yes
Product function
switch-managed
for IRT PROFINET IO switch
Configuration with STEP 7
No
Yes
Yes
Ordering data
CM 1542-1 communication
module
Accessories
IE FC RJ45 Plug 4 x 2
Product function
Ring redundancy
Yes
Yes
Redundancy manager
Media Redundancy Protocol (MRP) Yes

Ethernet (10/100/1000 Mbit/s) with
a sturdy metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180 cable outlet; for network
components and CPs/CPUs with
Industrial Ethernet interface
1 pack = 1 unit
1 pack = 10 units
1 pack = 50 units
Product functions Security

-
Product function with VPN connection Type of encryption algorithms with

VPN connection
Type of authentication procedure with VPN connection

Type of hashing algorithms with
VPN connection

VPN connection
Product function
password protection for Web applications
ACL - IP-based
ACL - IP-based for PLC/routing
switchoff of non-required services
blocking of communication via
physical ports
log file for unauthorized access
Yes
No
No

Product function
SICLOCK support
pass on time synchronization
Yes
Yes
Protocol is supported NTP
Yes
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC TP Standard Cable GP 4 x 2
cable for connection to IE FC RJ45
Modular Outlet for universal applications; with UL approval; sold by
the meter; max. quantity 1000 m,
minimum order 20 m
AWG22, for connection to
IE FC RJ45 Modular Outlet
AWG24, for connection to
IE FC RJ45 Plug 4 x 2
SCALANCE X204-2 Industrial
Ethernet Switch
6XV1870-2E
6XV1878-2A
6GK5204-2BB10-2AA3
Industrial Ethernet Switches with

integral SNMP access, Web
diagnostics, copper cable
diagnostics and PROFINET
diagnostics for configuring line,
star and ring topologies; four
10/100 Mbit/s RJ45 ports and two
FO ports
Industrial Ethernet Switch
SCALANCE X308-2
2 x 1000 Mbit/s multimode fiberoptic cable ports (SC sockets),
1 x 10/100/1000 Mbit/s RJ45 port,
7 x 10/100 Mbit/s RJ45 ports; for
glass fiber-optic cable (multimode)
up to max. 750 m
4/40
6GK7542-1AX00-0XE0
for connection of SIMATIC S7-1500

to PROFINET IO via TCP/IP, ISO,
UDP S7 communication, IP
broadcast/multicast, SNMPV1,
DHHCP, time synchronization via
NTP; 21 x RJ45 interface with
10/100 Mbit/s;
Product functions Redundancy
Design of the firewall
Article No.
6GK5308-2FL00-2AA3
Siemens AG 2014
SIMATIC S7-1500
SIPLUS CM PtP
Overview
Modules for serial communication connections, scaled
according to interface types, protocols, and performance
4 versions with different physical transmission characteristics:
- RS 232C, max. 19.2 Kbit/s
- RS 232C, max.115.2 Kbit/s
- RS 422/RS 485, max. 19.2 Kbit/s
- RS 422/RS 485, max. 115.2 Kbit/s
Protocols supported
- Freeport: User-parameterizable telegram format for
universal communication
- 3964(R) for improved transmission reliability
- Modbus RTU Master
- Modbus RTU Slave
- USS, implemented through instructions
Note:
Based on
Ambient conditions
6AG1540-1AD00-7AA0
CM PtP RS232 BA
6AG1541-1AD00-7AB0
CM PtP RS232 HF
6AG1540-1AB00-7AA0
CM PtP RS422/485 BA
6AG1541-1AB00-7AB0
CM PtP RS422/485 HF
6ES7540-1AD00-0AA0
6ES7541-1AD00-0AB0
6ES7540-1AB00-0AA0
6ES7541-1AB00-0AB0
-40 C; = Tmin;
startup @ -25 C
70 C
-40 C; = Tmin;
startup @ -25 C
40 C
-40 C; = Tmin;
startup @ -25 C
70 C
-40 C; = Tmin;
startup @ -25 C
40 C
-40 C; = Tmin;
startup @ -25 C
70 C
-40 C; = Tmin;
startup @ -25 C
40 C
-40 C; = Tmin;
startup @ -25 C
70 C
-40 C; = Tmin;
startup @ -25 C
40 C
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)

conditions)

conditions)

conditions)

Relative to ambient temper- Tmin ... Tmax at
ature-atmospheric pressure- 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Relative humidity
100 %; RH incl. condentested in accordance with sation/frost (no commisIEC 60068-2-38, maximum sioning under condensation
conditions)
4/41
Siemens AG 2014
SIMATIC S7-1500
SIPLUS CM PtP

Based on
6AG1540-1AD00-7AA0
CM PtP RS232 BA
6AG1541-1AD00-7AB0
CM PtP RS232 HF
6AG1540-1AB00-7AA0
CM PtP RS422/485 BA
6AG1541-1AB00-7AB0
CM PtP RS422/485 HF
6ES7540-1AD00-0AA0
6ES7541-1AD00-0AB0
6ES7540-1AB00-0AA0
6ES7541-1AB00-0AB0
Yes; Class 3B2 mold, fungus

and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
Yes; Class 3C4 (RH < 75%)
incl. salt spray according to
EN 60068-2-52 (degree of
severity 3). The supplied
connector covers must remain
on the unused interfaces
during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied connector
covers must remain on the
unused interfaces during
operation!

during operation!
operation!

during operation!
operation!

Resistance
substances/conformity with and dry rot spores (with the
EN 60721-3-3
substances/conformity with incl. salt spray according to
EN 60721-3-3
during operation!
substances/conformity with dust. The supplied connector
EN 60721-3-3
operation!
Ordering data
SIPLUS CM PtP RS232 BA
communication module
Article No.
6AG1540-1AD00-7AA0
Article No.
SIPLUS CM PtP RS422/485 BA

medial exposure)

medial exposure)
Basic communication module

with 1 interface RS232, Freeport,
3964(R) and USS protocols, 9-pin
sub D connector, max. 19.2 Kbit/s
Basic communication module

with 1 interface RS422/485,
Freeport, 3964(R) and USS
protocols, 15-pin sub D socket,
max. 19.2 Kbit/s
SIPLUS CM PtP RS232 HF

6AG1541-1AD00-7AB0

medial exposure)
High Feature communication
module with 1 interface RS232,
Freeport, 3964(R), USS and
Modbus RTU protocols, 9-pin
sub D connector, max. 115.2 Kbit/s
SIPLUS CM PtP RS422/485 HF

6AG1541-1AB00-7AB0

medial exposure)
High Feature communication
module with 1 interface RS422/485,
Freeport, 3964(R), USS and
Modbus RTU protocols, 15-pin
sub D socket, max. 115.2 Kbit/s
Accessories
4/42
6AG1540-1AB00-7AA0

CM PtP communication module,
Siemens AG 2014
SIMATIC S7-1500
SIPLUS CM 1542-5
Overview
Ordering data
Article No.
SIPLUS CM 1542-5
medial exposure)
Communication module
for electrical connection of
SIMATIC S7-1500 to PROFIBUS as
a DP master or DP slave
6AG1542-5DX00-7XE0
Accessories

CM 1542-5 communication module,
'36
)06
3*23
66
*B,.B;;B
'30
The CM 1542-5 communication module expands the SIMATIC

S7-1500 controller with an additional PROFIBUS connection for
communication with lower-level PROFIBUS devices in
bandwidths from 9.6 kbps to 12 Mbps. The module also allows
the implementation of separate PROFIBUS lines; in other words,
the control of multiple field devices via several PROFIBUS
segments. The CM 1542-5 handles all communication tasks,
thus reducing the CPU load.
Apart from classic PROFIBUS communication; the CM 1542-5 is
also suitable for S7 communication. This makes it possible to
establish communication between the S7-1500 controller and
other devices, for example those from the SIMATIC S7-300/400
range.
PROFIBUS DP master or DP slave with electrical interface for
connecting the SIMATIC S7-1500 to PROFIBUS at up to
12 Mbit/s (including 45.45 Kbit/s)
- PROFIBUS DP
- PG/OP communication
- S7 communication
Time synchronization
Simple programming and configuration over PROFIBUS
Cross-network PG communication using S7 routing
Module replacement without a PG
Data record routing (PROFIBUS DP)
Adding or modifying distributed I/O during operation
Note:
4/43
Siemens AG 2014
SIMATIC S7-1500
Connection system
Front connectors
Overview
Ordering data
Article No.
Front connectors
For 35 mm modules;
strips, 40-pin
Screw terminals
Push-in
For 25 mm modules;
labeling strips; push-in, 40-pin;
Spare part
6ES7592-1BM00-0XA0

connectors
6ES7592-3AA00-0AA0
Uniform, 40-pin front connector, suitable for SIMATIC S7-1500

I/O modules
Versions for 25 mm wide or 35 mm wide modules
With screw-type or push-in terminals
Front connector for 35 mm modules to be ordered separately;
front connector for 25 mm modules included in scope of
supply of modules
Connectable core cross-sections: 0.25 mm2 to 1.5 mm2
(AWG 24 to 16)
4/44
6ES7592-1AM00-0XB0
6ES7592-1BM00-0XB0
Siemens AG 2014
SIMATIC S7-1500
SIPLUS system power supplies
Overview
System power supplies for the SIMATIC S7-1500
For conversion of AC or DC line voltages to the operating
voltages required for the internal electronics
25 or 60 W output power
Can be used for S7-1500 or ET 200MP
Configuration via STEP 7 V12
Note:
Based on
Ambient conditions
altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
6AG1505-0KA00-7AB0
PS 25W 24VDC
6AG1505-0RA00-7AB0
PS 60W 24/48/60V DC
6AG1507-0RA00-7AB0
PS 60W 120/230V AC/DC
6ES7505-0KA00-0AB0
6ES7505-0RA00-0AB0
6ES7507-0RA00-0AB0
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector
covers must remain on the unused interfaces during operation!

transport
Temperature
- Min.
- max.
during operation
Temperature
- Min.
- max.
Ordering data
-40 C
70 C
-25 C; = Tmin
70 C; = Tmax; for vertical mounting
position Tmax = +40 C
Article No.
SIPLUS system power supply

medial exposure)
For supplying the backplane bus of
the S7-1500
-25 C; = Tmin
70 C; = Tmax; > +60 C max. power
input 30 W; for vertical mounting
6AG1505-0KA00-7AB0
-25 C; = Tmin
70 C; = Tmax; for vertical mounting
Article No.
power 60 W
6AG1505-0RA00-7AB0

power 60 W
6AG1507-0RA00-7AB0
Accessories

system power supplies,
4/45
Siemens AG 2014
SIMATIC S7-1500
SIPLUS load power supplies
Application
Ordering data
Article No.
SIPLUS S7-1500 PM 1507

medial exposure)
The design and functionality of the SIMATIC PM 1507 singlephase load power supply (PM = power module) with automatic
range selection of the input voltage are an optimal match to the
SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the
input and output modules and, if necessary, the sensors and
actuators with 24 V DC.
Note:
4/46
Input 120/230 V AC,

output 24 V DC, 3 A
6AG1332-4BA00-7AA0
Input 120/230 V AC,

output 24 V DC, 8 A
6AG1333-4BA00-7AA0
Siemens AG 2014
SIMATIC S7-300
5/2
5/2

Technology CPUs
5/8
5/8
SIPLUS S7-300 digital modules

SIPLUS S7-300 SM 321
digital input modules
digital output modules
5/10
5/12
5/12
5/14
SIPLUS S7-300 analog modules

analog input modules
analog output modules
5/15
5/15
SIPLUS S7-300 Ex digital modules

SIPLUS S7-300 Ex digital input modules
5/16
5/16
SIPLUS S7-300 Ex analog modules

SIPLUS S7-300 Ex analog input modules
5/17
5/17
SIPLUS S7-300 communication

SIPLUS CP 343-1 Advanced
Brochures
printmaterial
Siemens AG 2014
SIMATIC S7-300
Technology CPUs
Overview CPU 315T-3 PN/DP
Overview CPU 317T-3 PN/DP
5
SIMATIC CPU with integral Technology/Motion Control
functionality
With full standard CPU 315-2 PN/DP functionality
(except for CBA)
Ideal for synchronized motion, such as coupling to a
virtual/real master, gear synchronization, cam disk, path interpolation, or print mark compensation
3D path interpolation with different kinematics
Position and pressure-regulated hydraulic axes
distributed I/O
With integrated I/O for high-speed technology functions
(e.g. camming, reference point acquisition)
PROFIBUS DP (DRIVE) interface for isochronous connection
of drive components
PROFINET interface with 2-port switch
PROFINET I/O controller for operating distributed I/O on
PROFINET
One common S7 user program for control and motion control
tasks (no additional programming language necessary for
motion control)
"S7 technology" option package required (version V4.2 SP3
and higher)
SIMATIC CPU with integral Technology/Motion Control

functionality
With full standard CPU 317-2 PN/DP functionality
(except for CBA)
distributed I/O
of drive components
PROFINET
motion control)
"S7 Technology" option package required (version V4.2 SP3
and higher)
SIMATIC Micro Memory Card (8 MB) required for operation of the

CPU.

CPU.
5/2
Siemens AG 2014
SIMATIC S7-300
Technology CPUs
Overview CPU 317TF-3 PN/DP
Fail-safe SIMATIC CPU 317TF-3 PN/DP with integral

Technology/Motion Control functionality
Spare-part-compatible successor to the CPU 317TF-2 DP
(Article No. 6ES7317-6TF14-0AB0)
With full functionality of the standard CPU 317-2 PN/DP and
CPU 317F-2 PN/DP (except for CBA)

distributed I/O
of drive components
PROFINET
motion control)
"S7-Technology" option package required
"S7 Distributed Safety" option package required
(version V4.2 SP3 and higher)
CPU.
6ES7315-7TJ10-0AB0
6ES7317-7TK10-0AB0
General information
Engineering with
Programming package
6ES7317-7UL10-0AB0
STEP 7 V5.5 SP2 or higher; S7Technology option package V4.2 SP3

or higher, Distributed Safety V5.4 SP5
or higher, S7-F Configuration Pack
V5.5 SP10 or higher
Supply voltage
24 V DC
Yes
Yes
Yes
Power losses
Power loss, typ.
7.5 W
7.5 W
8.5 W
1 024 kbyte
256 kbyte
1 536 kbyte
256 kbyte
Memory
Work memory
integrated
384 kbyte
Size of retentive memory for retentive 128 kbyte
data blocks
Load memory
pluggable (MMC), max.
8 Mbyte
8 Mbyte
8 Mbyte

0.05 s
0.025 s
0.025 s
0.09 s
0.03 s
0.03 s
0.12 s
0.04 s
0.04 s
0.45 s
0.16 s
0.16 s

S7 counter
Number
256
512
512
IEC counter
present
Yes
Yes
Yes
S7 times
Number
256
512
512
IEC timer
present
Yes
Yes
Yes
5/3
Siemens AG 2014
SIMATIC S7-300
Technology CPUs
6ES7315-7TJ10-0AB0
6ES7317-7TK10-0AB0
6ES7317-7UL10-0AB0

Flag
Number, max.
2 048 byte
4 096 byte
4 096 byte
Address area
I/O address area
Inputs
Outputs
2 048 byte
2 048 byte
8 192 byte
8 192 byte
8 192 byte
8 192 byte
Process image
Inputs, adjustable
Outputs, adjustable
2 048 byte
2 048 byte
8 192 byte
8 192 byte
8 192 byte
8 192 byte
Time of day
Clock
Yes
Yes
Yes
Operating hours counter

Number
1st interface
Interface type
Integrated RS 485 interface
Physics
RS 485
RS 485
RS 485
Functionality
MPI
DP master
DP slave
Point-to-point connection
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
DP master
Number of DP slaves, max.
124
124
124
2nd interface
Interface type
Physics
RS 485
RS 485
RS 485
Functionality
MPI
DP master
DP slave
No
Yes; DP(DRIVE)-Master
No
No
No
No
No
DP master
Number of DP slaves, max.
64
64
64
3rd interface
Interface type
PROFINET
PROFINET
PROFINET
Physics
Ethernet RJ45
Ethernet RJ45
Ethernet RJ45
Number of ports
No
No
No
Yes; Also simultaneously
with IO-Device functionality
with IO Controller functionality
No
No
No
No
No
No
128
128
128
64
64
64
Isochronous mode
Yes; Via PROFIBUS DP or PROFINET

interface

interface

interface
PG/OP communication
Yes
Yes
Yes
Data record routing
Yes
Yes
Yes
Global data communication

supported
Yes
Yes
Yes
Functionality
MPI
DP master
DP slave
PROFINET IO Device
Max. number of connectable
IO devices for RT
Number of IO Devices with IRT and
the option "high performance", max.
5/4
Siemens AG 2014
SIMATIC S7-300
Technology CPUs

6ES7315-7TJ10-0AB0
6ES7317-7TK10-0AB0
6ES7317-7UL10-0AB0
S7 basic communication
supported
Yes
Yes
Yes
S7 communication
supported
Yes
Yes
Yes
S5-compatible communication
supported
Yes; via CP and loadable FC
Yes; via integrated PROFINET

interface and loadable FBs
8
8
8

16
16
16

16
16
16
Web server
supported
Yes
Yes
Yes
overall
16
32
32
Ambient conditions
Min.
max.
0 C
60 C
0 C
60 C
0 C
60 C
Configuration
programming
- LAD
- FBD
- STL
- SCL
- CFC
- GRAPH
- HiGraph
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TCP/IP
- Number of connections, max.
UDP
Know-how protection
User program protection/password
protection
Block encryption
Yes; With S7 block Privacy
Dimensions
Width
120 mm
120 mm
120 mm
Height
125 mm
125 mm
125 mm
Depth
130 mm
130 mm
130 mm
Weights
Weight, approx.
640 g
640 g
640 g
5/5
Siemens AG 2014
SIMATIC S7-300
Technology CPUs
Ordering data
CPU 315T-3 PN/DP
Article No.
6ES7315-7TJ10-0AB0
384 KB main memory, 24 V DC

power supply, MPI, PROFIBUS DP
master/slave interface,
PROFIBUS DP(DRIVE) interface,
Ethernet/PROFINET interface with
2-port switch;
with technology/motion control
functions;
MMC required
CPU 317T-3 PN/DP
S7 Distributed Safety V5.4

programming tool
Task:
Configuration software for configuring fail-safe user programs for
WinAC RTX F, ET 200S, ET 200M,
ET 200iSP, ET 200pro, ET 200eco
Requirement:
STEP 7 V5.3 SP3 and higher
6ES7317-7TK10-0AB0
1024 KB main memory, 24 V DC

2-port switch;
functions;
MMC required
CPU 317TF-3 PN/DP
Article No.
Floating License for 1 user
6ES7833-1FC02-0YA5

documentation1);
6ES7833-1FC02-0YH5
S7 Distributed Safety upgrade

from V5.x to V5.4; Floating License
for 1 user
6ES7833-1FC02-0YE5
SIMATIC Micro Memory Card

6ES7317-7UL10-0AB0
1.5 MB main memory, 24 V DC

2-port switch;
functions;
MMC required
8 MB
6ES7953-8LP31-0AA0
MPI cable
6ES7901-0BF00-0AA0
For connection of SIMATIC S7 and

PG via MPI; 5 m in length
Front connectors
S7-Technology V4.2
V4.2 SP3 and higher can be used
for CPU 315T-3 PN/DP and
CPU 317TF-3 PN/DP
Task:
Option package for configuring and
programming technology tasks with
the SIMATIC S7 CPU 31xT and
SIMATIC S7 CPU 317TF
Requirement:
Delivery form:
incl. up-to-date Service Pack;
on DVD;
incl. documentation for
CPU 31xT-2 DP, CPU 317TF-2 DP
(also on DVD)
40-pin, with screw contacts

1 unit
100 units
6ES7392-1AM00-0AA0
6ES7392-1AM00-1AB0
40-pin, with spring-loaded contacts

1 unit
100 units
6ES7392-1BM01-0AA0
6ES7392-1BM01-1AB0
Slot number plates
6ES7912-0AA00-0AA0
S7-300 manual
Design, CPU data, module data,
instruction list
Floating License
6ES7864-1CC42-0YA5

documentation1); email address
required for delivery
6ES7864-1CC42-0XH5
Upgrade to V4.2
6ES7864-1CC42-0YE5
Trial License
6ES7864-1CC42-0YA7
German
6ES7398-8FA10-8AA0
English
6ES7398-8FA10-8BA0
SIMATIC Manual Collection
6ES7998-8XC01-8YE0
Electronic manuals on DVD,

multilingual: LOGO!, SIMADYN,
SIMATIC bus components,
SIMATIC C7, SIMATIC distributed
I/O, SIMATIC HMI, SIMATIC
Sensors, SIMATIC NET, SIMATIC PC
Based Automation, SIMATIC PCS 7,
SIMATIC PG/PC, SIMATIC S7,
SIMATIC Software, SIMATIC TDC
update service for 1 year
6ES7998-8XC01-8YE2
Current "Manual Collection" DVD

and the three subsequent updates
1)

5/6
Siemens AG 2014
SIMATIC S7-300
Technology CPUs
Ordering data
Article No.
6ES7391-1AA00-0AA0
10 units, spare part

Labeling strips

6ES7392-2XX00-0AA0

Label cover
6ES7392-2XY00-0AA0
SCALANCE X204-2
petrol
6ES7392-2AX10-0AA0
light-beige
6ES7392-2BX10-0AA0
yellow
6ES7392-2CX10-0AA0
red
6ES7392-2DX10-0AA0
USB A2 PC adapter
6GK1571-0BA00-0AA0
For connecting a PG/PC or

Notebook to PROFIBUS or MPI;
USB cable included in scope of
delivery
6GK5204-2BB10-2AA3

10/100 Mbit/s RJ45 ports and
two FO ports
Compact Switch Module CSM 377
5
6GK7377-1AA00-0AA0
Unmanaged Switch for connecting

a SIMATIC S7-300, ET200 M and up
to three other stations to Industrial
Ethernet with 10/100 Mbit/s;
4 x RJ45 ports; external 24 V DC
power supply, LED diagnostics,
S7-300 module incl. electronic
manual on CD-ROM
PROFIBUS bus components
6ES7972-0BA12-0XA0
6ES7972-0BB12-0XA0
6ES7972-0BA52-0XA0
6ES7972-0BA52-0XB0
6ES7972-0BB52-0XA0
6ES7972-0BB52-0XB0
6GK1500-0EA02
6XV1830-0EH10

for quick mounting, 2-core,
shielded, sold by the meter, max.
delivery unit 1000 m, minimum
ordering quantity 20 m
RS 485 repeater for PROFIBUS
6XV1873-2A
Standard cable, splittable,

UL approval, sold by the meter
For modules with 40-pin front

connector, DIN A4, for printing with
laser printer; 10 units
PROFIBUS Fast Connect

bus cable
6XV1840-2AH10

RJ45/ IE FC RJ45 Plug; PROFINETcompatible; with UL approval;
sold by the meter
FO Standard Cable GP (50/125)
Labeling sheets for machine

inscription
PROFIBUS DP bus connector

RS 485
with 90 cable outlet, max. transfer
rate 12 Mbit/s
- without PG interface
- with PG interface
with 90 cable outlet for
FastConnect connection system,
max. transfer rate 12 Mbit/s
- without PG interface, 1 unit
- without PG interface, 100 units
- with PG interface, 1 unit
- with PG interface, 100 units
with axial cable outlet for
SIMATIC OP, for connecting to
PPI, MPI, PROFIBUS
Article No.
PROFINET bus components
IE FC RJ45 Plugs
installation cables
IE FC RJ45 Plug 180
180 cable outlet
1 unit
6GK1901-1BB10-2AA0
10 units
6GK1901-1BB10-2AB0
50 units
6GK1901-1BB10-2AE0
PROFIBUS/PROFINET bus
components
See catalogs IK PI, CA 01
For establishing
MPI/PROFIBUS/PROFINET
communication
6ES7972-0AA02-0XA0
Transmission rate up to 12 Mbit/s;

24 V DC; IP20 enclosure
5/7
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 321 digital input modules
Overview
Digital inputs
For connection of switches and 2-wire proximity switches
(BEROs)
Note:
5
Based on
Ambient conditions
Min.
max.
Extended ambient
conditions
Relative to ambient
Relative humidity
maximum
Resistance
substances/
conformity with
EN 60721-3-3
substances/
conformity with
EN 60721-3-3
substances/
conformity with
EN 60721-3-3
5/8
6AG1321-1BH02-2AA0
6AG1321-1BL00-2AA0
6AG1321-1CH20-2AA0
6AG1321-1FF01-2AA0
6AG1321-1FF10-7AA0
6ES7321-1BH02-0AA0
6ES7321-1BL00-0AA0
6ES7321-1CH20-0AA0
6ES7321-1FF01-0AA0
6ES7321-1FF10-0AA0
-40 C; = Tmin
70 C; = Tmax; 60 C @
UL/cUL, ATEX and FM
use
-40 C; = Tmin
70 C; = Tmax; for use on
railway vehicles
according to EN50155,
the rated temperature
range -25 ... +55 C (T1)
or 60 C @
UL/ULhaz/ATEX/FM use
applies
-25 C
railway vehicles
range -25 ... +55 C (T1)
or 60 C @
applies
-40 C; = Tmin
railway vehicles
range -25 ... +55 C (T1)
or 60 C @
applies
-25 C
70 C; = Tmax;
60 C @ UL/cUL,
ATEX and FM use
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

Tmin ... Tmax at
1080 hPa ... 795 hPa
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) // (-1000 m ... +2000 m)
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 321 digital input modules

Based on
Ambient conditions
Min.
max.
altitude

Relative humidity
6AG1321-1FH00-7AA0
6AG1321-7BH01-2AB0
6AG1321-7TH00-4AB0
6ES7321-1FH00-0AA0
6ES7321-7BH01-0AB0
6ES7321-7TH00-0AB0
-40 C; = Tmin
70 C; = Tmax; 60 C @ UL/cUL,
ATEX and FM use
-25 C
70 C; = Tmax; 60 C @ UL/cUL,
ATEX and FM use
0 C
60 C

(-1000 m ... +2000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
0 C



maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data

Article No.
Article No.
Exposure to media
SIPLUS S7-300 SM 321 digital

input modules
16 inputs, NAMUR, redundant

design possible
Extended temperature range and

exposure to media
6AG1321-7TH00-4AB0
Conforms to EN 50155
16 inputs, 24 V DC
6AG1321-1BH02-2AA0
32 inputs, 24 V DC
6AG1321-1BL00-2AA0
16 inputs, 48 to 120 V DC
6AG1321-1CH20-2AA0
8 inputs, 120/230 V AC
6AG1321-1FF01-2AA0
8 inputs, 120/230 V AC, single root
6AG1321-1FF10-7AA0
16 inputs, 120/230 V AC
16 inputs, 24 V DC,
diagnostics-capable
16 inputs, 24 V DC
6AG1321-1BH02-2AA0
32 inputs, 24 V DC
6AG1321-1BL00-2AA0
16 inputs, 48 to 120 V DC
6AG1321-1CH20-2AA0
8 inputs, 120/230 V AC
6AG1321-1FF01-2AA0
6AG1321-7BH01-2AB0
6AG1321-1FH00-7AA0
16 inputs, 24 V DC,
diagnostics-capable
6AG1321-7BH01-2AB0
Accessories
See SIMATIC S7-300

digital input modules,
5/9
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 322 digital output modules
Overview
Digital outputs
For connecting solenoid valves, contactors, small-power
motors, lamps and motor starters
Note:
Based on
Ambient conditions
Min.
max.
6AG1322-1BF01-2XB0
6AG1322-8BF00-2AB0
6AG1322-1BH01-2AA0
6AG1322-1BL00-2AA0
6ES7322-1BF01-0XB0
6ES7322-8BF00-0AB0
6ES7322-1BH01-0AA0
6ES7322-1BL00-0AA0
-25 C
70 C; = Tmax; 60 C @
UL/cUL use
-25 C; = Tmin
70 C; = Tmax; 60 C @
UL/cUL use
-25 C
railway vehicles according to
EN50155, the rated temperature range -25 ... +55 C (T1)
or 60 C @ UL/ULhaz/ATEX/FM
use applies
-25 C; = Tmin
use applies

Relative to ambient temper- Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
ature-atmospheric pressure- at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Based on
Ambient conditions
Min.
max.

Relative to ambient temperature-atmospheric pressureinstallation altitude
Relative humidity
maximum
Resistance
EN 60721-3-3
5/10
6AG1322-1CF00-7AA0
6AG1322-1HF10-2AA0
6AG1322-5HF00-4AB0
6AG1322-1FF01-7AA0
6ES7322-1CF00-0AA0
6ES7322-1HF10-0AA0
6ES7322-5HF00-0AB0
6ES7322-1FF01-0AA0
0 C; = Tmin
60 C; = Tmax
-40 C
or 60 C @ UL/UL hazardous
use applies
-25 C
-25 C
60 C
use applies
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 322 digital output modules

Based on
6AG1322-1CF00-7AA0
6AG1322-1HF10-2AA0
6AG1322-5HF00-4AB0
6AG1322-1FF01-7AA0
6ES7322-1CF00-0AA0
6ES7322-1HF10-0AA0
6ES7322-5HF00-0AB0
6ES7322-1FF01-0AA0

Resistance
substances/conformity with The supplied connector covers must remain on the unused interfaces during operation!
EN 60721-3-3
EN 60721-3-3
6AG1322-5FF00-4AB0
6AG1322-1FH00-7AA0
6AG1322-1HH01-2AA0
Based on
6ES7322-5FF00-0AB0
6ES7322-1FH00-0AA0
6ES7322-1HH01-0AA0
Ambient conditions
Min.
max.
0 C; = Tmin
60 C; = Tmax
-40 C; = Tmin
-40 C
70 C; = Tmax; 60 C @ UL/cUL, ATEX 70 C; = Tmax; 60 C @ UL/cUL, ATEX
and FM use
and FM use

(-1000 m ... +2000 m)

(-1000 m ... +2000 m)

altitude
Relative humidity
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data


(-1000 m ... +2000 m)

Article No.
Article No.
Exposure to media
SIPLUS S7-300 SM 322 digital

output modules
exposure to media
8 outputs, 120/230 V AC, 2 A
6AG1322-5FF00-4AB0
8 outputs, relay contacts, 5 A, with

RC filter, overvoltage protection
6AG1322-5HF00-4AB0
8 outputs, 24 V DC, 2 A
6AG1322-1BF01-2XB0
16 outputs, 24 V DC, 0.5 A
6AG1322-1BH01-2AA0
6AG1322-1BL00-2AA0
16 outputs, 24 V DC, 0.5 A,

high speed
6AG1322-1BH01-2AA0

8 outputs, 48 to 125 V DC, 1.5 A
6AG1322-1CF00-7AA0
6AG1322-1BL00-2AA0
8 outputs, 120/230 V AC, 1 A
6AG1322-1FF01-7AA0
8 outputs, relay contacts, 5 A
6AG1322-1HF10-2AA0
16 outputs, 120/230 V AC, 1 A
6AG1322-1FH00-7AA0
6AG1322-1HH01-2AA0
6AG1322-1HF10-2AA0
6AG1322-8BF00-2AB0
6AG1322-1HH01-2AA0

diagnostics-capable

diagnostics-capable
6AG1322-8BF00-2AB0
Accessories
See SIMATIC S7-300

digital output modules,
5/11
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 331 analog input modules
Overview
Analog inputs
For connecting voltage sensors and current sensors, thermocouples, resistors and resistance thermometers
Note:
5
Based on
Ambient conditions
Min.
max.

altitude
Relative humidity
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
5/12
6AG1331-1KF02-7AB0
6AG1331-7KB02-2AB0
6AG1331-7KF02-2AB0
6ES7331-1KF02-0AB0
6ES7331-7KB02-0AB0
6ES7331-7KF02-0AB0
-25 C
-25 C; = Tmin
-25 C; = Tmin
70 C; = Tmax; 60 C @ UL/cUL, ATEX 70 C; = Tmax; 60 C @ UL/cUL, ATEX 70 C; = Tmax; for use on railway
and FM use
and FM use
vehicles according to EN50155, the
rated temperature range -25 ... +55 C
(T1) or 60 C @ UL/ULhaz/ATEX/FM
use applies
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 331 analog input modules

Based on
Ambient conditions
Min.
max.
6AG1331-7NF00-2AB0
6AG1331-7NF10-2AB0
6AG1331-7PF01-4AB0
6AG1331-7PF11-4AB0
6ES7331-7NF00-0AB0
6ES7331-7NF10-0AB0
6ES7331-7PF01-0AB0
6ES7331-7PF11-0AB0
0 C; = Tmin
60 C; = Tmax
0 C; = Tmin
60 C; = Tmax
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)

conditions)

conditions)

conditions)
-25 C; = Tmin
-25 C; = Tmin
60 C; = Tmax
or 60 C @ UL/UL hazardous
use applies

Relative humidity
maximum

conditions)
- With condensation, tested

in accordance with
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data
Article No.
Article No.
Exposure to media
SIPLUS S7-300 SM 331 analog

input modules
8 inputs, for thermal resistors
6AG1331-7PF01-4AB0

exposure to media
8 inputs, for thermocouples
6AG1331-7PF11-4AB0
8 inputs, 13-bit resolution
6AG1331-1KF02-7AB0
2 inputs, 9/12/14-bit resolution
6AG1331-7KB02-2AB0
6AG1331-7KF02-2AB0
6AG1331-7KF02-2AB0
8 inputs, enhanced 16-bit resolution
6AG1331-7NF00-2AB0
8 inputs, enhanced 16-bit resolution
6AG1331-7NF00-2AB0
Accessories
8 inputs, enhanced 16-bit

resolution, 4-channel mode
6AG1331-7NF10-2AB0
See SIMATIC S7-300

analog input modules,
5/13
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 SM 332 analog output modules
Overview
Analog outputs
For connection of analog actuators
Note:
5
Based on
Ambient conditions
Min.
max.
6AG1332-5HD01-7AB0
6AG1332-7ND02-4AB0
6AG1332-5HB01-2AB0
6AG1332-5HF00-2AB0
6ES7332-5HD01-0AB0
6ES7332-7ND02-0AB0
6ES7332-5HB01-0AB0
6ES7332-5HF00-0AB0
-25 C; = Tmin
70 C; = Tmax; 60 C @
UL/cUL, ATEX and FM use
0 C; = Tmin
60 C; = Tmax
-25 C; = Tmin
-25 C
70 C; = Tmax; 60 C @
railway vehicles according to UL/cUL, ATEX and FM use
use applies

Relative to ambient temper- Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
ature-atmospheric pressure- at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
100 %; RH incl. condenmaximum
sation/frost (no commissioning under condensation
conditions)
- With condensation, tested 100 %; RH incl. conden100 %; RH incl. conden100 %; RH incl. condenin accordance with IEC
sation/frost (no commissation/frost (no commissation/frost (no commis60068-2-38, maximum
sioning under condensation
conditions)
conditions)
conditions)
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data
Article No.
Exposure to media
SIPLUS S7-300 SM 332 analog

output modules
4 outputs, 16-bit;
only medial exposure

exposure to media
6AG1332-7ND02-4AB0
2 outputs, 11/12-bit
6AG1332-5HB01-2AB0
6AG1332-5HD01-7AB0
6AG1332-5HF00-2AB0
5/14
Article No.
6AG1332-5HB01-2AB0
Accessories
See SIMATIC S7-300

analog output modules,
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 Ex digital modules
SIPLUS S7-300 Ex digital input modules
Overview
6AG1321-7RD00-4AB0
Based on
6ES7321-7RD00-0AB0
Ambient conditions
Min.
max.
0 C; = Tmin
60 C; = Tmax

altitude
Digital inputs for signals from the Ex field

For the connection of intrinsically safe digital equipment from
the Ex field
4 DI NAMUR
4 digital inputs in 4 channel modules (single-channel isolation)
Connectable encoder in accordance with DIN EN 60947-5-6
and NAMUR, optionally with wired or unwired mechanical
contacts
Programmable diagnostics and diagnostic interrupt
Note:
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Relative humidity
maximum
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
Ordering data

during operation!
Article No.
SIPLUS S7-300
Ex digital input module
Exposure to media
4 inputs, isolated, NAMUR
6AG1321-7RD00-4AB0
Accessories
See SIMATIC S7-300

Ex digital input modules,
5/15
Siemens AG 2014
SIMATIC S7-300
SIPLUS S7-300 Ex analog modules
SIPLUS S7-300 Ex analog input modules
Overview
Analog inputs for signals from the Ex field
For the connection of intrinsically safe analog equipment from
the Ex field
4 analog inputs in 4 channel groups (single-channel isolation)
Measurement type and range can be selected for each
channel
Programmable diagnostics and diagnostic interrupt
Programmable threshold alarm
HART-compatible inputs (6AG1331-7RD00-2AB0 only)
Note:
5
Based on
Ambient conditions
Min.
max.
6AG1331-7RD00-2AB0
6AG1331-7SF00-4AB0
6ES7331-7RD00-0AB0
6ES7331-7SF00-0AB0
-25 C; = Tmin
0 C; = Tmin
60 C; = Tmax; 60 C @ UL/cUL, ATEX and FM use, 60 C; = Tmax
70 C only 4 wire

Relative to ambient temperature-atmospheric
pressure-installation altitude
Relative humidity
Resistance
- to biologically active substances/conformity with

EN 60721-3-3
- to chemically active substances/conformity with
EN 60721-3-3
- to mechanically active substances/conformity
with EN 60721-3-3
Ordering data

(-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa (+2000 m ... +3500 m) //
(+3500 m ... +5000 m)
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces
during operation!
Article No.
Exposure to media
SIPLUS S7-300 Ex analog input

modules
exposure to media
4 inputs, isolated, 0/4 to 20 mA,
15 bit
5/16
Article No.
6AG1331-7RD00-2AB0
8/4 inputs, isolated, for thermocouples and Pt100, Pt200, Ni100;

medial exposure only
6AG1331-7SF00-4AB0
Accessories
See SIMATIC S7-300

Ex analog input modules,
Siemens AG 2014
SIMATIC S7-300
Overview
Media redundancy (MRP);
within an Ethernet network with ring topology, the CP supports
the media redundancy procedure MRP (V2.2 or higher).
Access protection by means of configurable IP access list
Module replacement without programming device;
all information is stored on the C-PLUG (also file system
for IT functions)
Extensive diagnostic functions for all modules in the rack
IT communication
- Web function
- E-mail function
- FTP
Integration into network management systems through the
support of SNMP V1 MIB-II
Note:
7&3
8'3
31
053
,7
,35
3*23 66
*B,.B;;B
,62

Connection of SIMATIC S7-300/SINUMERIK 840D powerline

to Industrial Ethernet
- Multi-protocol operation with TCP and UDP transport
protocol
- Adjustable keep-alive function
Two separate interfaces (integrated network separation):
- Gigabit interface with one RJ45 port with 10/100/1 000
Mbit/s, full/half-duplex with auto-sensing capability
- PROFINET interface with two RJ45 ports with 10/100 Mbit/s
full/half-duplex with auto-sensing and auto-crossover
functionality via integrated 2-port switch
Communication services via both interfaces:
- Open communication (TCP/IP and UDP): Multicast with UDP,
including routing between both interfaces
- PG/OP communication:
Cross-network by means of S7 routing
- S7 communication (client, server, multiplexing) including
routing between both interfaces
- IT communication:
HTTP communication supports access to process data via
own web pages;
e-mail client function, sending of e-mails directly from user
program;
FTP communication supports program-controlled FTP client
communication;
access to data blocks through FTP server
Communication services via PROFINET interfaces:
- PROFINET IO controller and IO device with real-time
properties (RT and IRT)1)
- PROFINET CBA
- IP address assignment via DHCP, simple PC tool or via
program block (e.g. for HMI)
- Configuration with STEP 7
SIPLUS S7-300 CP 343-1 Advanced

Article No.
6AG1343-1GX31-4XE0
BasedOn Article No.
6GK7343-1GX31-0XE0
0 ... +60 C
Conformal coating
Coating of the printed circuit boards

and the electronic components
Technical data
The technical data of the standard

product applies, except for the
ambient conditions.
Ambient conditions
Relative humidity
100%, condensation/frost permissible. No commissioning if condensation present.
Biologically active substances,

compliance with EN 60721-3-3
Class 3B2 mold and fungal spores

(excluding fauna). The supplied plug
covers must remain in place over the
Chemically active substances,

Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of

severity 3). The supplied plug covers
must remain in place over the unused
Mechanically active substances,

Class 3S4 incl. sand, dust. The

place over the unused interfaces
during operation!
Air pressure (depending on the

highest positive temperature range
specified)
1080 ... 795 hPa (-1 000 ... +2 000 m)

see ambient temperature range
795 ... 658 hPa (+2 000 ... +3 500 m)
derating 10 K
658 ... 540 hPa (+3 500 ... +5 000 m)
derating 20 K
For technical documentation on SIPLUS, see:

http://www.siemens.com/siplus-extreme
1)
Possible combinations in parallel mode:

- IO controller with IRT and IO device with RT
- IO controller with RT and IO device using IRT
5/17
Siemens AG 2014
SIMATIC S7-300
Ordering data
Article No.
Article No.
SIPLUS S7-300 CP 343-1

Advanced communications
processor
Accessories
for connecting the SIMATIC S7-300

to Industrial Ethernet, PROFINET
IO-Controller and IO-Device with RT
and IRT, MRP, PROFINET CBA,
TCP/IP and UDP, S7 communication, open communication
(SEND/RECEIVE), FETCH/WRITE
with or without RFC 1006,
diagnostics extensions, multicast,
Web server, HTML diagnostics,
FTP server, FTP client, e-mail client,
CPU clock set via SIMATIC
procedure and NTP, access control
via IP access List, SNMP, DHCP,
initialization over LAN
10/100 Mbit/s;
with electronic manual on DVD;
C-PLUG included
Swap medium for simple

replacement of devices in the event
of a fault; for storing configuration or
engineering and application data;
can be used for SIMATIC NET
products with C-PLUG slot,
-40 ... +70 C, medial exposure
Exposure to media
C-PLUG
IE FC RJ45 Plug 180 2 x 2
6AG1343-1GX31-4XE0

installation cables;
180 cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
1 pack = 1 unit
-40 ... +70 C, medial exposure
Additional accessories
5/18
6AG1900-0AB00-7AA0
6AG1901-1BB10-7AA0
See SIMATIC CP 343-1 Advanced
communications processor,
Siemens AG 2014
SIMATIC S7-400
6/2
6/2
6/4

SIPLUS S7-400 CPU 414H
6/5
6/5
Communication
CP 443-1 RNA
6/7
6/7
6/8

SIPLUS S7-400 CP 443-5 Extended
6/10
6/10

SIPLUS S7-400 power supplies
6/12
6/12
Modules for SIMATIC S7-400F/FH

SIPLUS IM 153-1/153-2
Brochures
printmaterial
Siemens AG 2014
SIMATIC S7-400
Overview
CPU for SIMATIC S7-400H and S7-400F/FH
Usable in high-availability systems such as the S7-400H
Usable with F runtime license as F-capable CPU
in S7-400F/FH safety-related systems
With integral PROFIBUS DP master interface
Features 2 slots for sync modules
Note:
6AG1414-5HM06-7AB0
CPU 414-5H PN/DP
Based on
6ES7414-5HM06-0AB0
Ambient conditions
altitude
Relative humidity
Resistance
with EN 60721-3-3
with EN 60721-3-3
with EN 60721-3-3
6/2
Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m).
For "F-Systems" applications
max. +2000 m above sea level
permissible
during operation!
6AG1414-5HM06-7AB0
CPU 414-5H PN/DP
Based on
6ES7414-5HM06-0AB0

during operation
Temperature
- Min.
-25 C
70 C; For "F-Systems" applications
- max.
max. +60 C permissible
Siemens AG 2014
SIMATIC S7-400
Ordering data
Article No.
SIPLUS S7-400 CPU 414-5H
RS 485 bus connector

with 90 cable outlet
CPU for S7-400H and S7-400F/FH

with main memory 4 MB (2 MB
code and 2 MB data); 5 interfaces:
1x MPI/DP, DP, PN each and 2 slots
for sync modules
exposure to media
Article No.
Max. transfer rate 12 Mbit/s
6AG1414-5HM06-7AB0

exposure to media
Without PG interface
With PG interface
Accessories

with angled cable outlet
Memory Card RAM
Max. transmission rate 12 Mbit/s
Exposure to media
2 MB
exposure to media
4 MB
8 MB
16 MB
64 MB
6AG1952-1AL00-4AA0
6AG1952-1AM00-7AA0
6AG1952-1AP00-7AA0
6AG1952-1AS00-7AA0
6AG1952-1AY00-7AA0
FEPROM memory card

Exposure to media
32 MB

exposure to media
With PG interface
6AG1972-0BA42-7XA0
6AG1972-0BB42-7XA0

with axial cable outlet
For SIPLUS OP, for connection to
PPI, MPI, PROFIBUS
exposure to media
6AG1952-1KT00-4AA0
6AG1972-0BA12-2XA0
6AG1972-0BB12-2XA0
6AG1500-0EA02-2AA0

Transfer rate up to 12 Mbit/s;
exposure to media
6AG1972-0AA02-7XA0
Further accessories
see SIMATIC S7-400 CPU 414-4H,

catalog ST 70 2013, page 6/39.
6/3
Siemens AG 2014
SIMATIC S7-400
Overview
Ordering data
CPU for SIMATIC S7-400H and S7-400F/FH

Usable in high-availability systems such as the S7-400H
Usable with F runtime license as F-capable CPU
in S7-400F/FH safety-related systems
With integrated PROFIBUS DP master and combined
MPI/PROFIBUS DP master interface
With integrated PROFINET interface (2-port switch)
Features 2 slots for sync modules
Note:
6AG1416-5HS06-7AB0
CPU 416-5H PN/DP
Based on
6ES7416-5HS06-0AB0
Ambient conditions
altitude
Relative humidity
Resistance
EN 60721-3-3
EN 60721-3-3
EN 60721-3-3
6AG1416-5HS06-7AB0
(medial exposure)
CPU for S7-400H and S7-400F/FH
with main memory 16 MB (6 MB
code and 10 MB data); 5 interfaces:
1x MPI/DP, DP, PN each and 2 slots
for sync modules
Accessories
Memory card RAM
Exposure to media
2 MB
6AG1952-1AL00-4AA0

exposure to media
4 MB
8 MB
16 MB
64 MB
6AG1952-1AM00-7AA0
6AG1952-1AP00-7AA0
6AG1952-1AS00-7AA0
6AG1952-1AY00-7AA0
FEPROM memory card

Exposure to media
32 MB
6AG1952-1KT00-4AA0

Tmin ... Tmax at

1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
658 hPa ... 540 hPa
(+3500 m ... +5000 m).
For "F-Systems" applications max.
+2000 m above sea level permissible
Yes; Class 3C4 incl. salt spray
according to EN 60068-2-52 (degree
of severity 3). The supplied connector
Yes; Class 3S4 incl. sand, dust.
The supplied connector covers must
during operation!

during operation
Temperature
- Min.
-25 C
70 C; For "F-Systems" applications
- max.
max. +60 C permissible
6/4
SIPLUS S7-400 CPU 416-5H
Article No.

exposure to media
With PG interface
6AG1972-0BA12-2XA0
6AG1972-0BB12-2XA0

with angled cable outlet
exposure to media
With PG interface
6AG1972-0BA42-7XA0
6AG1972-0BB42-7XA0

with axial cable outlet
For SIPLUS OP, for connection to
PPI, MPI, PROFIBUS
exposure to media
6AG1500-0EA02-2AA0

Transfer rate up to 12 Mbit/s;
exposure to media
6AG1972-0AA02-7XA0
Further accessories
see SIMATIC S7-400

CPU 416H,
Siemens AG 2014
SIMATIC S7-400
Communication
CP 443-1 RNA
Overview
Article No.
6GK7443-1RX00-0XE0
CP 443-1 RNA
Transmission rate
Transfer rate
at the interface 1
at the interface 2
10 000 000 100 000 000 bit/s

- 100 000 000 bit/s
Interfaces
Number of electrical connections
Industrial Ethernet
Industrial Ethernet
Design of electrical connection
Industrial Ethernet
Industrial Ethernet
TCP/
UDP
PN
PRP
IT
IP-R
Communication processor for connecting a

SIMATIC S7-400/S7-400H to Industrial Ethernet networks.
The CP supports:
PG/OP communication
S7 communication
Open communication (SEND/RECEIVE)
The communications processor can be used in SIMATIC H
systems and for fail-safe applications (PROFIsafe) in connection
with an S7-400 F-CPU. The CP 443-1 RNA (Redundant Network
Access) 1) offers the option of using the PRP procedure (Parallel
Redundancy Protocol in accordance with IEC 62439-3) to
connect an S7-400 or S7-400H to parallel, separate networks
where high availability is required.
The PRP functionality can be deactivated so that standard
Industrial Ethernet communication is also possible with the CP.
The PRP redundancy procedure is based on double transmission of message frames over two separate networks (LAN A,
LAN B). In the event of a fault in one of the two networks, transmission of the message frame from the second network is
ensured without delay. A reconfiguration time (switchover of the
communication paths) for the network, such as is required with
other redundancy procedures, is thus not necessary.
1)
RJ45 port
RJ45 port

PG/OP S7/S5
G_IK10_XX_10151
ISO
At Siemens Industry, RNA stands for hardware and software to implement

redundancy solutions. RNA contains the PRP V1 protocol in accordance
with the IEC 62439-3 standard (Parallel Redundancy Protocol) as well as
the HSR protocol in accordance with IEC 62439-3 (High-availability
Seamless Redundancy Protocol).
DC
Supply voltage 1 from backplane bus 5 V

with DC
Consumed current from backplane
bus at 5 V for DC Typical
1.8 A
Resistive loss
7.25 W

Ambient temperature
during operating
during storage
during transport
Comment
0 60 C
-40 +70 C
-40 +70 C
-

maximum
95 %
Protection class IP
IP20

Module format
Compact module S7-400 single width
Width
Height
Depth
0.025 m
0.29 m
0.21 m
Net weight
0.7 kg

components general
Number of modules
per CPU maximum
note
14
-
6/5
Siemens AG 2014
SIMATIC S7-400
Communication
CP 443-1 RNA

Article No.
6GK7443-1RX00-0XE0
CP 443-1 RNA
Performance data
open communication
Data volume
as user data per ISO connection for
as user data per ISO on TCP
connection for open communication
by means of SEND/RECEIVE blocks
maximum
as user data per TCP connection for
as user data per UDP connection for
open IE communication by means of
T blocks maximum
8 192 byte
8 192 byte
8 192 byte
2 048 byte
64

S7 communication
maximum
note
128
2
when using several CPUs

mode
multiprotocol mode
128

configuration
Product function MIB support
Yes
Protocol is supported SNMP v1
Yes
STEP 7 V5.5 SP2 + HSP 1097 or

higher

Product function Web-based
diagnostics
Yes
Product functions Redundancy

Product function Parallel
Redundancy Protocol (PRP)
Yes
Product functions Security

Product function
ACL - IP-based
ACL - IP-based for PLC/routing
switchoff of non-required services
blocking of communication via
physical ports
Yes
Yes
Yes
Yes

Product function
SICLOCK support
pass on time synchronization
Yes
Yes
Protocol is supported NTP
Yes
6/6
6GK7443-1RX00-0XE0
Software
64
Data volume as user data per ISO on 1 452 byte

TCP connection for open communication by means of T blocks maximum
Number of Multicast stations
CP 443-1 RNA
communication processor
Article No.
For connecting the

SIMATIC S7-400/S7-400H CPU
to Industrial Ethernet
Performance data

Ordering data
STEP 7 Version 5.5

Target system:
SIMATIC S7-300/-400,
SIMATIC C7, SIMATIC WinAC
Requirements:
Windows XP Prof.,
Windows 7 Professional/Ultimate
Delivery package:
German, English, French, Spanish,
Italian; incl. license key on USB
stick, with electronic documentation
Floating license on DVD
Rental license for 50 hours
Software Update Service on DVD
(requirement: current software
version)
Upgrade Floating License
3.x/4.x/5.x to V5.5; on DVD
Trial License STEP 7 V5.5;
on DVD, 14 day trial
1)
6ES7810-4CC10-0YA5
6ES7810-4CC10-0YA6
6ES7810-4BC01-0YX2
6ES7810-4CC10-0YE5
6ES7810-4CC10-0YA7
For up-to-date information and download availability, see

Siemens AG 2014
SIMATIC S7-400
SIPLUS S7-400 CP 443-5 Extended
Overview
Note:
SIPLUS CP 443-5-Extended
Article No.
6AG1443-5DX05-4XE0
Article No. based on
6GK7443-5DX05-0XE0
0 ... +60 C
Conformal coating

The technical specifications of the

standard product apply, except for
the ambient conditions
Ambient conditions
'36
)06
3*23
DP-V1 master connection of the S7-400 to PROFIBUS

For setting up additional PROFIBUS DP lines
- PROFIBUS DP
- S7 communication
- S5-compatible communication (SEND/RECEIVE)
Clock synchronization
Easy programming and configuration over PROFIBUS
Cross-network programming device communication through
S7 routing
Can be easily integrated into the SIMATIC S7-400 system
Module replacement without PG
SIMATIC H system operation for redundant S7 communication
or DP master communication
Data record routing (PROFIBUS DP)
Adding or modifying distributed I/O during operation
Ordering data
Relative humidity






during operation!

specified)
1080 ... 795 hPa (-1000 ... +2000 m)

66
*B,.B;;B
'30
658 ... 540 hPa (+3500 ... +5000 m)

derating 20 K

Article No.

Extended communications
processor
795 ... 658 hPa (+2000 ... +3500 m)

derating 10 K
Article No.
Accessories
See SIMATIC CP 443-5 Extended,

for connecting SIMATIC S7-400 to

PROFIBUS; Extended Version for
PROFIBUS DP;
with electronic manual, on CD-ROM
Exposure to media
6AG1443-5DX05-4XE0
6/7
Siemens AG 2014
SIMATIC S7-400
Overview
Access protection by means of configurable IP access list
Module replacement without programming device;
all information is stored on the C-PLUG
(also file system for IT functions)
Extensive diagnostic functions for all modules in the rack
Integration into network management systems through the
support of SNMP V1 MIB-II
Operation in the SIMATIC H system for redundant
S7-communication
Operation in fail-safe applications (PROFIsafe) in combination
with SIMATIC S7-400 CPU 416F
Note:
,62
31
053
,7
,35
3*23 66
*B,.B;;B
7&3
8'3
Connection of SIMATIC S7-400 to Industrial Ethernet

- Multi-protocol operation for ISO, TCP/IP, UDP and
PROFINET IO protocols
- Adjustable keep-alive function
Two separate interfaces (integrated network separation):
- Gigabit interface with one RJ45 port
with 10/100/1 000 Mbit/s, full/half-duplex
with auto-sensing capability
- PROFINET interface with four RJ45 ports with 10/100 Mbit/s,
full/half duplex with autosensing and autocrossover functionality via integrated 4-port switch
Communication services via both interfaces
- Open communication (ISO, TCP/IP and UDP), multicast with
UDP, including routing between both interfaces
- PG/OP communication:
Cross-network by means of S7 routing
- S7 communication (client, server, multiplexing) including
routing between both interfaces
- IT communication:
HTTP communication supports access to process data via
own Web pages;
e-mail client function, sending of e-mails with authentication
directly from user program;
FTP communication supports program-controlled FTP client
communication;
access to data blocks through FTP server
Communication services via PROFINET interface
- PROFINET IO controller with real-time properties
(RT and IRT)
- PROFINET CBA
- IP address assignment via DHCP, simple PC tool or via the
user program (e.g. HMI)
- Support of the prioritized startup of PROFINET IO devices
- Configuration with STEP 7
Media redundancy (MRP);
the CP supports the media redundancy procedure MRP within
an Ethernet network with ring topology.
6/8
Article No.
6AG1443-1GX30-4XE0
Article number based on
6GK7443-1GX30-0XE0
0 ... +60 C
Conformal coating

Technical data
The technical data of the standard

product applies, except for the
ambient conditions
Ambient conditions
Relative humidity






during operation!

specified)
1 080 ... 795 hPa (-1 000 ... +2 000 m)

795 ... 658 hPa (+2 000 ... +3 500 m)
derating 10 K
658 ... 540 hPa (+3 500 ... +5 000 m)
derating 20 K

Siemens AG 2014
SIMATIC S7-400
Ordering data
Article No.

Advanced communications
processor
Accessories
SIPLUS SCALANCE X204-2
For the connection of

SIMATIC S7-400 to Industrial
Ethernet; PROFINET IO Controller
with RT and IRT, MRP, PROFINET
CBA, TCP/IP, ISO and UDP;
S7 communication,
open communication
(SEND/RECEIVE) with
FETCH/WRITE, with and without
RFC 1006, diagnostic expansions,
multicast, clock synchronization via
SIMATIC procedure or NTP, access
protection via IP access list,
FTP client/server, HTTP server,
HTML diagnostics, SNMP, DHCP,
e-mail, data storage on C-PLUG;
PROFINET interface:
4 x RJ-45 (10/100 Mbit/s)
over switch;
Gigabit interface:
1 x RJ45 (10/100/1000 Mbit/s)
Exposure to media
Article No.

10/100 Mbit/s RJ45 ports and
two FO ports
exposure to media
6AG1204-2BB10-4AA3
SIPLUS SCALANCE X308-2

2 x 1000 Mbit/s multimode
fiber-optic ports (SC sockets),
1 x 10/100/1000 Mbit/s RJ45 port,
7 x 10/100 Mbit/s RJ45 ports;
for glass fiber-optic cable
(multimode) up to max. 750 m
6AG1443-1GX30-4XE0
Exposure to media
6AG1308-2FL00-4AA3
SIPLUS NET RJ45 Plug 180

180 cable outlet; 1 unit
exposure to media
6AG1901-1BB10-7AA0
SIPLUS NET RJ45 Plug 90

90 cable outlet; 1 unit
exposure to media
6AG1901-1BB20-7AA0
Further accessories
See SIMATIC CP 443-1 Advanced,

6/9
Siemens AG 2014
SIMATIC S7-400
Overview
Power supplies for SIPLUS S7-400
For conversion of AC or DC line voltages to the 5 V DC and
24 V DC operating voltages required
4 A, 10 A and 20 A output currents
Note:
Based on
Ambient conditions
Relative humidity
maximum
Resistance
with EN 60721-3-3
with EN 60721-3-3
with EN 60721-3-3
6AG1405-0KA02-7AA0
6AG1405-0KR02-7AA0
6AG1407-0KA02-7AA0
6AG1407-0KR02-7AA0
6ES7405-0KA02-0AA0
6ES7405-0KR02-0AA0
6ES7407-0KA02-0AA0
6ES7407-0KR02-0AA0
100 %; Relative humidity, incl. 100 %; RH incl. condensation/frost (no commissioning if there is condensation).
condensation / frost permitted In buffer mode, use battery box SIPLUS 6AG1971-0AA00-7AA0 for high humidity
(no commissioning under
condensation conditions)
interfaces during operation in
corrosive atmospheres!
according to EN 60068-2-52
(degree of severity 3). The
operation!

Temperature
- Min.
-25 C; = Tmin
- max.
6/10
70 C; = Tmax
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused
-25 C; = Tmin; using the

external battery box SIPLUS
6AG1971-0AA00-7AA0 for
buffer mode
70 C; = Tmax; using the
external battery box SIPLUS
buffer mode
-25 C; using the external

battery box SIPLUS
buffer mode
70 C; using the external
battery box SIPLUS
buffer mode
-25 C; using the external

battery box SIPLUS
buffer mode
70 C; using the external
battery box SIPLUS
buffer mode
Siemens AG 2014
SIMATIC S7-400

Based on
Connection method
Connecting cables/cross
sections
6AG1405-0KA02-7AA0
6AG1405-0KR02-7AA0
6AG1407-0KA02-7AA0
6AG1407-0KR02-7AA0
6ES7405-0KA02-0AA0
6ES7405-0KR02-0AA0
6ES7407-0KA02-0AA0
6ES7407-0KR02-0AA0
3 x 1.5 mm2, solid or stranded 3 x 1.5 mm2, solid or stranded 3 x 1.5 mm2, solid or stranded 3 x 1.5 mm2, solid or stranded
wire with end sleeve, external wire with end sleeve, external wire with end sleeve, external wire with end sleeve, external
diameter 3 to 9 mm
diameter 3 to 9 mm
diameter 3 to 9 mm
diameter 3 to 9 mm
Ordering data
Article No.
Article No.
SIPLUS S7-400 PS 405

power supply modules
SIPLUS S7-400 PS 407

power supply modules
In: 24/48/60 V DC - wide range

(19.2 ... 72 V DC);
Out: 24 V DC/1 A, 5 V DC/10 A
In: 110/230 V DC; 120/230 V AC;

Out: 24 V DC/1 A, 5 V DC/10 A

exposure to media
6AG1405-0KA02-7AA0
6AG1407-0KA02-7AA0
In: 110/230 V DC; 120/230 V AC;

Out: 24 V DC/1 A, 5 V DC/10 A;
for redundant use
In: 24/48/60 V DC - wide range

(19.2 ... 72 V DC);
Out: 24 V DC/1 A, 5 V DC/10 A;
for redundant use
exposure to media

exposure to media
6AG1405-0KR02-7AA0

exposure to media
6AG1407-0KR02-7AA0
Accessories
See SIMATIC PS 405/407

power supply,
catalog ST 70 2013,
page 6/147.
6/11
Siemens AG 2014
SIMATIC S7-400
Modules for SIMATIC S7-400F/FH
SIPLUS IM 153-1/153-2
Overview
For further information, see chapter 9, page 9/59.
Note:

6/12
Siemens AG 2014
Embedded Controller
7/2
7/2
7/5
7/9
Embedded bundles/
Software packages
SIMATIC IPC427D bundles
Software packages
for SIMATIC IPC and S7-mEC
Brochures
printmaterial
Siemens AG 2014
Embedded Controller
Embedded bundles/Software packages
Overview
SIMATIC IPC427D (Microbox PC): The powerful embedded
IPC maintenance-free with versatile configuration
Ready-to-run, complete solutions (software is already installed
and preconfigured) for visualization and automation in
connection with WinCC RT Advanced and/or WinAC RTX.
Ultra-compact
Maintenance-free
Third generation Intel Core i technology
Current product versions of the pre-installed software:
- SIMATIC WinCC RT Advanced
- SIMATIC WinAC RTX 2010
- SIMATIC Net V8.x
6AG4140-.....-...0
Supply voltage
Supply voltage
Processor
Processor
24 V DC
CE, cULus (508), C-Tick
24 V
CE mark
Yes
KC approval
Yes
cULus
Yes
EMC
CE, EN 55022A, EN 61000-6-4,

EN 61000-6-2
EN 61000-6-2
Yes
Marine approval
GL
ABS
BV
DNV
LRS
Yes
Yes
Yes
Yes
Yes
Ambient conditions
Ambient temperature in operation
- during operating phase, min.
- during operating phase, max.
0 C
55 C
Intel Celeron Processor 827E

(1.5MB Cache, 1.40 GHz);
Intel Core i3-3217UE Processor
(3MB Cache, 1.60 GHz);
Intel Core i7-3517UE Processor
(4MB Cache, up to 2.80 GHz)
Drives
Hard disk
2.5" SATA hard disk, at least 250 GB
Memory
Main memory
1 GB to 8 GB, ECC optional
Interfaces
PROFIBUS/MPI
6AG4140-.....-...0
Approval
Onboard, isolated, max. 12 Mbit/s,

CP5611-compatible
USB port
4x USB 3.0 high speed/high current
Free slots
1xPCIe (x4), 1xPCIe (x1)
Connection for keyboard/mouse
USB / USB
serial interface
1 x RS232; 2 x RS232 (optional);

CAN (optional)
Operating systems
Operating system
1x DisplayPort and 1x DVI-I;

1x VGA via adapter cable (optional)
Pre-installed operating system
Video interfaces
Graphics interface
Supports protocol for PROFINET IO
Number of PROFINET interfaces
1; 3 ports (incl. switch)
Industrial Ethernet
- 100 Mbps
- 1000 Mbps
2 x Fast Ethernet
Yes
Yes
Monitoring functions
Temperature
Yes
Watchdog
Yes
Status LEDs
Yes

IP (at the front)
20
7/2
Software
SIMATIC Software
Windows 7 Ultimate (Multi Language)

32-bit/64-bit, Windows Embedded
Standard 7 32-bit/64-bit
Yes
Optionally with pre-installed software
bundle SIMATIC WinCC RT
Advanced / WinAC RTX
Siemens AG 2014
Embedded Controller
Ordering data
SIMATIC IPC427D (Box PC)
Article No.
1)2)
Article No.
6AG4140- 7 7 7 7 7 - 7 7 7 7
Processor and fieldbus:

Celeron U827E (1C/1T,
1.4 GHz, 1.5 MB cache);
2 x Gigabit Ethernet (IE/PN)
Celeron U827E (1C/1T, 1.4 GHz,
1.5 MB cache); 2 x Gigabit
Ethernet (IE/PN); PROFIBUS DP12
Core i3-3217UE (2C/4T, 1.6 GHz,

3 MB cache); 2 x Gigabit Ethernet
(IE/PN)
Core i3-3217UE (2C/4T, 1.6 GHz,

(IE/PN); PROFIBUS DP12
Core i3-3217UE (2C/4T, 1.6 GHz,

(IE/PN); 1 x PROFINET
(IRT, 3 ports)
Core i7-3517UE (2C/4T,

1.7 (2.8) GHz, 3 MB cache);
(optional ECC only here)

1.7 (2.8) GHz, 3 MB cache);
2 x Gigabit Ethernet (IE/PN);
PROFIBUS DP12

1.7 (2.8) GHz, 3 MB cache);
1 x PROFINET (IRT, 3 ports)
DIN rail mounting
Wall mounting
Portrait mounting
One RS 232 and two PCIe
Second RS 232, without PCIe
Second RS 232 and one PCIe
Second RS 232 and second PCIe
Without operating system
Windows Embedded Standard 7

SP1, English, 32-bit

Windows 7 Ultimate SP1, 32-bit,

MUI (Eng, Ger, Fr, It, Sp)

Without external mass storage
CFast 2 GB
CFast 4 GB
(only optionally with operating
system if no internal mass
storage)
CFast 8 GB
storage)
CFast 16 GB
storage)
Internal mass storage:
Work memory/NVRAM/ECC:
8 GB
One RS 232 and one PCIe
Mass storage,
externally accessible:
Without mounting accessories
4 GB
One RS 232, without PCIe
Operating system:
Mounting accessories:
2 GB
6AG4140- 7 7 7 7 7 - 7 7 7 7
Expansions/interface:

Ethernet (IE/PN); CAN interface
1 GB
SIMATIC IPC427D (Box PC)
1)2)
A
B
C
D
4 GB with ECC (only with Core i7,

2 x Gigabit Ethernet (IE/PN))
8 GB with ECC (only with Core i7,

2 x Gigabit Ethernet (IE/PN))
1 GB and NVRAM
2 GB and NVRAM
4 GB and NVRAM
8 GB and NVRAM
4 GB with ECC and NVRAM (only

with Core i7, 2 x Gigabit Ethernet
(IE/PN))
8 GB with ECC and NVRAM (only

with Core i7, 2 x Gigabit Ethernet
(IE/PN))
Without internal mass storage
CFast 2 GB, without software
SSD 50 GB high endurance (SLC)
SSD 80 GB Standard
HDD 250 GB
SSD 160 GB Standard
1)
"Built to order" versions with a delivery time of max. 15 working days and
with identified repair, if not preferred type.
2)
For an up-to-date overview, see the SIMATIC PC online configurator at:

www.siemens.com/ipc-configurator
7/3
Siemens AG 2014
Embedded Controller
Ordering data
SIMATIC IPC427D (Box PC) 1)2)
Article No.
Article No.
6AG4140- 7 7 7 7 7 - 7 7 7 7
SIMATIC software preinstalled

(bundles, only with Windows
Embedded Standard 7):
SIMATIC IPC427D (Box PC) 1)2)
6AG4140- 7 7 7 7 7 - 7 7 7 7
Power supply:
Without SIMATIC software
WinAC RTX 2010 3)
WinCC RT Advanced, 128 PT
WinCC RT Advanced 128 PT,

WinAC RTX 2010 3)

WinAC RTX 2010 3)

WinAC RTX 2010 3)

WinAC RTX 2010 3)
WinAC RTX F 2010 3)

WinAC RTX F 2010 3)

WinAC RTX F 2010 3)

WinAC RTX F 2010 3)

WinAC RTX F 2010 3)
24 V DC
industrial power supply
24 V DC and TPM
(not for China and Russia)
1)
"Built to order" versions with a delivery time of max. 15 working days and
with identified repair, if not preferred type.
2)
For an up-to-date overview, see the SIMATIC PC online configurator at:

www.siemens.com/ipc-configurator
3)
Only with "main memory and NVRAM".
Note:
Bundles with SIMATIC software only with Windows Embedded
Standard 7,
main memory and NVRAM (with RTX and RTX F), and CFast
mass storage of 4 GB or more / SSD.
7/4
Siemens AG 2014
Embedded Controller
Overview
Embedded PC platform with extremely high industrial
compatibility for demanding tasks in the field of PC-based
automation
Maintenance-free (no rotating components such as fan and
hard disk)
Rugged construction: the PC is resistant to even the harshest
mechanical stress and is extremely reliable in operation
Compact design
Battery-independent retentive memory onboard
High investment protection
Fast integration capability
Safety requirements up to SIL 3 in accordance with
IEC 61508/62061 or EN ISO 13849-1 up to PL e can be
implemented with WinAC RTX F
SIMATIC IPC477D: The powerful embedded Panel PC

maintenance-free with versatile configuration
Ready-to-run, complete solutions (software is already installed
and preconfigured) for visualization and automation in
connection with WinCC RT Advanced and/or WinAC RTX.
The following front versions are available:

Built-in versions
- 12" TFT Touch
- 15" TFT Touch
- 19" TFT Touch
- 22" TFT Touch
- 15" TFT Touch/Key
Current product versions of the pre-installed SIMATIC
software:
- SIMATIC WinCC RT Advanced V12
- SIMATIC WinAC RTX 2010 or SIMATIC WinAC RTX F 2010
- SIMATIC NET V8.2 (including SIMATIC SOFTNET S7 Basis
license)
- and the combinations of the software packageslisted above
SIMATIC IPC477D
Supply voltage1)
Brief voltage interruption in

accordance with NAMUR
Power consumption (DC) of devices
(without expansions):
12" display
15" display
19" display
22" display
Additional power consumption of
devices with expansions:
DVD drive
PCIe card
24 V DC (-20 % / +20 %) 1)
100 - 240 V AC (-15 % / +20 %);
50 - 60 Hz
SATA drive
1 slot
Solid-state drive
1 x 50 GB; 2.5" SATA-SSD,

high endurance or
1 x 80 GB; 2.5" SATA-SSD,
standard or
1 x 160 GB; 2.5" SATA-SSD,
standard
Hard disk drive (HDD)
1 x 250 GB, 2.5"-SATA-HD
CFast card
DVD drive, RW
1 slot for devices with expansion
Min. 20 ms (DC)
Min. 20 ms (AC); max. 10 events per
hour; min. 1 s recovery time
55 W
56 W
65 W
74 W
2 GB or
4 GB or
8 GB or
16 GB
Graphics
1W
5W
Processor
Intel Celeron 827E 1.4 GHz;

1.5 MB SLC or
Intel Core i3-3217UE 1.6 GHz;
3 MB SLC or
Intel Core i7-3517UE 1.7 GHz;
4 MB SLC
Main memory
SO-DIMM module;
1024 MB DDR3-SDRAM or
SO-DIMM module;
SO-DIMM module;
SO-DIMM module;
8192 MB DDR3-SDRAM
Buffer memory 2)
SIMATIC IPC477D
Drive and storage media
General features
Display, resolution
1)
512 KB MRAM
2)
12" screen diagonal

with LED backlighting,
resolution 1280 800 pixels,
WXGA (Wide XGA) *** bis hier
15" screen diagonal
resolution 1280 800 pixels,
WXGA (Wide XGA)
19" screen diagonal
resolution 1366 x 768 pixels
22" screen diagonal
resolution 1920 x 1080 pixels
The generation of the supply voltage by the line-side power supply

must be realized as safety extra-low voltage with safe electrical
isolation, isolated according to IEC 60364 4 41, or as SELV according
to IEC/UL/EN/DIN-EN 60950-1.
For devices with retentivity.
7/5
Siemens AG 2014
Embedded Controller

SIMATIC IPC477D
Touch controller
Resistive Tyco Elotouch controller

ELO CTR-2216SU-AT-CHP-00, touch
screen, analog resistive, touch force
with test pen of 2 mm diameter: 5 N
Only for device with expansions:

1 x PCIe-x4 expansion card can be
used, max. permissible power loss:
5W
Backlighting (MTBF)
LED
Half brightness life time, typical
Min. 50000 h at 50 C, 50% brightness
Graphics controller
Intel HD 2000 or
Intel HD 4000
IP 20 to IEC 60529 (enclosure)

IP 65 (front)
Quality assurance
In accordance with ISO 9001
Graphics memory
32 512 MB shared memory
Electromagnetic compatibility
Resolutions, frequency, colors
DVI-I: 640 x 480 1920 x 1200,

60 Hz
DP display port: 1920 x 1200, 60 Hz
Emitted interference S
EN 61000-6-4; CISPR 22 Class A;

FCC Class A
Immunity with regard to conducted

interference on the supply lines
2 kV to IEC 61000-4-4; burst

1 kV to IEC 61000-4-5; surge
symmetrical
2 kV to IEC 61000-4-5; surge
asymmetrical
Noise immunity on signal lines
2 kV to IEC 61000-4-4; burst,

length > 3 m
1 kV to IEC 61000-4-4; burst,
length < 3 m
2 kV to IEC 61000-4-5; symmetrical
surge, length > 30 m
Immunity to static discharge
6 kV, contact discharge

at the front to IEC 61000-4-2
4 kV contact discharge
at the rear to IEC 61000-4-2
8 kV air discharge to IEC 61000-4-2
Immunity to high radio frequency

interference
10 V/m, 80 1000 MHz

80 % AM to IEC 61000-4-3
1 V/m, 2 2.7 GHz
3 V/m, 2 2.7 GHz
10 V, 10 kHz 80 MHz to
IEC 61000-4-6
Immunity to magnetic fields
100 A/m, 50/60 Hz to IEC 61000-4-8
Interfaces
SIMATIC IPC477D
Slot for PCIe expansion cards
COM 1 and COM 2
RS 232, max. 115 kbps, 9-pin,

sub-D connector
DVI
Connection of VDUs
with DVI connection
Display port (DPP)
Connection of VDUs
with DPP connection
Keyboard
Connection via USB port
Mouse
Connection via USB port
USB
Rear of device:
4 x USB 3.0, max. 2 high-current
at the same time
Front of device (only with IPC477D
with 15", 19" or 22" display):
1 x USB 2.0, high-current
PROFIBUS/MPI
Transmission rate
Operating modes
9-pole, 2 rows, electrically isolated,

Sub-D socket, compatible with
CP 5622
9.6 Kbps 12 Mbps
DP master: DP-V0, DP-V1 with
SOFTNET-DP
DP slave: DP-V0, DP-V1 with
SOFTNET-DP slave
PROFINET
3 x RJ45 interface, CP 1616

compatible onboard interface based
on ERTEC 400
10/100 Mbps, electrically isolated
Ethernet 3)
2 x RJ45 connection, Intel 82579LM

and Intel 82574L
10/100/1000 Mbps, electrically
isolated, teaming-capable 4)
Weight
IPC477D, touch device, 12" display
IPC477D, touch/key device
(without expansions), 15" display
Approx. 3200 g
Approx. 4920 g
Approx. 5750 g
Approx. 6400 g
Approx. 7000 g
or
For PROFINET versions: 1 x Ethernet
7/6
3)
For unambiguous labeling, the Ethernet ports are numbered on the

enclosure. The numbering by the operating system can differ.
4)
Teaming can be set and initiated in the configuration interface.

In teaming operation, jumbo frames, e.g. for the camera application,
are not supported
Siemens AG 2014
Embedded Controller
Ordering data
SIMATIC IPC477D
Article No.
1)
Article No.
6AV7240- 7 7 7 7 7 - 7 7 7 7
Processor and fieldbus:
6AV7240- 7 7 7 7 7 - 7 7 7 7
Operating system:

Ethernet (IE/PN)

Ethernet (IE/PN); PROFIBUS DP12
Core i3-3217UE (2C/4T, 1.6 GHz,

(IE/PN)
Core i3-3217UE (2C/4T, 1.6 GHz,

(IE/PN); PROFIBUS DP12
Core i3-3217UE (2C/4T, 1.6 GHz,

(IE/PN); 1 x PROFINET
(IRT, 3 ports)

1.7 (2.8) GHz, 3 MB cache);

1.7 (2.8) GHz, 3 MB cache);
PROFIBUS DP12

1.7 (2.8) GHz, 3 MB cache);
1 x PROFINET (IRT, 3 ports)




Externally accessible mass storage

(without operating system):
Without external mass storage
CFAST 2 GB, without software
CFAST 4 GB
CFAST 8 GB
CFAST 16 GB
DVD
Internal mass storage:
Operator control unit:

12" Touch (1280 x 800)
(caution, restrictions regarding
options: HDD, PCI, AC, DVD)
15" Touch (1280 x 800)

with front USB
15" Touch/Key (1280 x 800)

with front USB
19" Touch (1366 x 768)

with front USB
22" Touch (1920 x 1080)

with front USB
SIMATIC IPC477D
1)
Main memory/NVRAM:
1 GB
2 GB
4 GB
8 GB
1 GB and NVRAM
2 GB and NVRAM
4 GB and NVRAM
8 GB and NVRAM
Without internal mass storage
CFAST 2 GB
CFAST 4 GB
CFAST 8 GB
CFAST 16 GB
SSD 50 GB High Endurance
SSD 80 GB Standard
HDD 250 GB
DVD
SSD 50 GB high endurance

with DVD
SSD 80 GB standard with DVD
SSD 160 GB standard without

DVD
HDD min. 250 GB with DVD
Expansions/interface:
1 x RS 232, without PCIe
1 x RS 232 and 1 x PCIe
Second RS 232, without PCIe
Second RS 232 and 1 x PCIe
4
1) Built to order versions with a delivery time of max. 15 working days and
with identified repair.
7/7
Siemens AG 2014
Embedded Controller
Ordering data
SIMATIC IPC477D 1)
Article No.
Article No.
6AV7240- 7 7 7 7 7 - 7 7 7 7
SIMATIC software preinstalled

(bundles):
SIMATIC IPC477D 1)
6AV7240- 7 7 7 7 7 - 7 7 7 7
Power supply:
Without SIMATIC software
WinAC RTX 2010 2)
WinCC RT Advanced 128 PT

WinAC RTX 2)

WinAC RTX 2)

WinAC RTX 2)

WinAC RTX 2)
WinAC RTX 2010 F 2)

WinAC RTX F 2)

WinAC RTX F 2)

WinAC RTX F 2)

WinAC RTX F 2)
24 V DC industrial power supply
110/230 V AC industrial power

supply with Namur; no power
cable

supply with Namur; European
power cable

supply with Namur; US power
cable

supply with Namur; Chinese
power cable

supply with Namur; Italian power
cable

supply with Namur; Swiss power
cable

supply with Namur; UK power
cable
24 V DC industrial power supply

and TPM (not for China and
Russia)
1)
"Built to order versions with a delivery time of max. 15 working days and
with identified repair.
2) Only with main memory and NVRAM.
7/8
Siemens AG 2014
Embedded Controller
Software packages for SIMATIC IPC and S7-mEC
Overview
HMI complete systems
SIMATIC IPC and S7-mEC with SIMATIC WinCC flexible

SIMATIC IPC packages with WinCC flexible are an innovative
solution for simple visualization tasks directly at the machine
in the field of HMI.
This package can only be supplied if a SIMATIC IPC or
S7-mEC (same quantity) is ordered together with the
WinCC flexible Runtime software. It cannot be ordered
subsequently.
In combination with the embedded SIMATIC IPC
(HMI IPC477C (PRO) and IPC427C) and the embedded
controller S7-mEC, there are turn-key solutions (bundles),
i.e. the runtime software is already preinstalled.
SIMATIC IPC with SIMATIC WinCC (TIA Portal)
The SIMATIC IPC packages with WinCC make it easy to order
all the components required for an HMI solution on the basis
of a Panel PC.
This package can only be supplied if a SIMATIC IPC (same
quantity) is ordered together with the WinCC RT Advanced or
WinCC RT Professional software. It cannot be ordered subsequently.
In combination with the embedded SIMATIC IPC (IPC277D /
HMI IPC477C (PRO) / IPC477D and IPC227D / IPC427C /
IPC427D) there are turn-key solutions (bundles) available,
i.e. the runtime software is already preinstalled.
SIMATIC IPC with SIMATIC WinAC RTX (F)
The SIMATIC IPC packages with WinAC RTX (F) make it easy
to order all the components required for a control solution on
the basis of an industrial PC.
This package can only be supplied if a SIMATIC Industrial PC
(same quantity) is ordered together with the WinAC RTX (F)
Runtime software. It cannot be ordered subsequently.
In combination with the embedded SIMATIC IPC (IPC277D /
HMI IPC477C (PRO) / IPC477D and IPC227D / IPC427C /
IPC427D) and the S7-mEC embedded controller, there are
turn-key solutions (bundles) available, i.e. the runtime
software is already preinstalled.
Ordering data
SIMATIC WinCC flexible
package 1) 3)
(incl. archives and recipes)
WinCC flexible 2008 Runtime
128 PowerTags
512 PowerTags
2048 PowerTags
4096 PowerTags
SIMATIC WinCC package 2)
WinCC V7.2 Runtime 2)
128 PowerTags
256 Power Tags
1 024 PowerTags
8 192 PowerTags
65 536 PowerTags
SIMATIC WinCC package 2)
WinCC V7.0 SP3 Runtime 2)
128 PowerTags
512 PowerTags
2 048 PowerTags
8 192 PowerTags
65 536 PowerTags
Article No.
6AV6623- 2 7 A 0 0 - 0 A A 0
B
D
F
G
6AV6382- 2 7 A 0 7 - 2 A X 0
C
D
E
H
F
6AV6382- 2 7 A 0 7 - 0 A X 0
C
D
E
H
F
1)
Only if ordered together with a SIMATIC IPC,

SIMATIC Panel PC Ex, or S7-mEC
2)
Only if ordered together with a SIMATIC IPC
3)
The current version will always be supplied
SIMATIC WinCC (TIA Portal)

WinCC Runtime Advanced
Package 1)3)
Incl. Recipes + Logging
128 PowerTags
512 PowerTags
2048 PowerTags
4096 PowerTags
SIMATIC WinCC Runtime
Professional Package 2)3)
128 PowerTags
512 PowerTags
2048 PowerTags
4096 PowerTags
8192 PowerTags
65536 PowerTags
6AV2114- 2 7 A 0 0 - 0 A A 0
B
D
F
H
6AV2115- 2 7 A 0 0 - 0 A A 0
B
D
F
H
K
M
1)
Only if ordered together with a SIMATIC IPC,

SIMATIC Panel PC Ex, or S7-mEC
2)
3)
SIMATIC WinAC RTX (F) package

SIMATIC WinAC RTX 1) 2) 3)
6ES7671-0RC08-6YA0
SIMATIC WinAC RTX F 1) 2) 3)
6ES7671-1RC08-6YA0
1)
2)
3)
For 32-bit operating systems only
Note:
For ordering data for Panel PCs and accessories, see configurators in the catalog ST 80 / ST PC, "SIMATIC Panel PCs".
7/9
Siemens AG 2014
Embedded Controller
Software packages for SIMATIC IPC and S7-mEC
Ordering data
Article No.
Ready-to-use SIMATIC HMI IPC477C with WinCC

("Built to order" with max. delivery time of 14 working days;
only repairs are possible for hardware)
SIMATIC HMI IPC477C
with WinCC V7.0 SP2
6AV7884- 7 A 7 7 0 - 7 B 7 0
Fanless,
5 x USB2.0 (500 mA),
1 of which at front, 1 x COM (RS232),
power supply 24 V DC
with On/Off switch,
2 x PROFINET (IE),
2 GB main memory (DDR3-SDRAM),
CompactFlash Card 8 GB;
Windows Embedded 2009
preinstalled;
SIMATIC WinCC V7.0 SP2 Runtime
preinstalled
Client configurations
A1
E2
H3
Celeron M processor, 1.2 GHz,

1 GB SDRAM-DDR3, 8 GB CF card,
runtime license 128 PT
15" Touch
19" Touch
Client and stand-alone station

configurations
Core2 Solo processor 1.2 GHz,

2 GB SDRAM-DDR3, 8 GB CF card,
runtime license 128 PT
15" Touch
19" Touch
Stand-alone station
configurations
Processor Core2 Duo 1.2 GHz,

4 GB SDRAM-DDR3
15" Touch
19" Touch
8 GB CF card
H3
50 GB SSD
H3
Runtime license 128 PT
H3
Runtime license 2048 PT
H3
Note:
Other ready-to-use SIMATIC HMI IPC477Cs can be found in the
catalog ST 80 / ST PC, chapter Panel PC, under HMI IPC477C.
7/10
Siemens AG 2014

9/2
9/2
9/2
9/7
9/7
9/12
9/18
9/27
9/30
9/30
9/33
9/33
9/36
9/39
9/39
9/41
9/43
9/45
9/47
9/47
9/50
9/52
9/53
9/54
9/54
ET 200SP
Interface modules without CPU
IM 155-6
I/O modules
Digital input modules
Digital output modules
Analog input modules
Analog output modules
Communication
CM AS-i Master ST for SIMATIC ET 200SP
Technology modules
TM Count 1x24V counter module
TM PosInput 1 counter and position
recording module
Fail-safe I/O modules
Digital F input modules
Digital F output modules
Digital F output module relay
Fail-safe special modules
Fail-safe communication
F-CM AS-i Safety ST for ET 200SP
BaseUnits
BusAdapters
Accessories
9/55
9/56
SIMATIC ET 200S
Add-on products
from third-party manufacturers
SIMATIC ET 200S 1-STEP-DRIVE-5A-48V
SIMATIC ET 200S 1 SI CANopen
9/57
9/57
9/57
9/59
ET 200MP
Interface modules
IM 155-5 PN
IM 155-5 DP
9/61
9/61
9/61
ET 200M
SIPLUS interface modules
SIPLUS IM 153-1/153-2
9/63
9/63
9/63
ET 200pro
I/O modules
Analog expansion modules
9/65
9/65
PROFINET components
Enhanced Real-Time Ethernet Controller
ERTEC
Development kits
PROFINET Driver
9/67
9/68
Brochures
printmaterial
Siemens AG 2014

ET 200SP
IM 155-6
Overview
Interface module for linking the ET 200SP to PROFINET or
PROFIBUS
Handles all data exchange with the controller
BusAdapter (BA) for individual PROFINET connection
Integrated 2-port switch for line configuration
Depending on the selected interface module
- Up to a maximum of 64 I/O modules per station
- Replacement of I/O modules during operation
Operation with gaps (non-equipped BaseUnits) possible
Replacement of an I/O module possible during operation
(hot swapping)
Load group formation without power module
General information
Product function
I&M data
Engineering with
version
STEP 7 can be
version
PROFIBUS as of GSD
PROFINET as of GSD
6ES7155-6AA00-0BN0
6ES7155-6AU00-0BN0
IM 155-6 PN ST with
IM 155-6 PN ST
BA 2xRJ45 and server module with server module
6ES7155-6AU00-0CN0
IM 155-6 PN HF
with server module
6ES7155-6BA00-0CN0
IM155-6DP HF with PROFIBUS
connector and server module
Yes
Yes
Yes; I&M0 to I&M4
Yes; I&M0 to I&M3
V11 SP2 with HSP0024 / -
V12 / V12
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
GSD as of Revision 5
V2.3 / -
Supply voltage
V1.0 / V2.23
V2.3 / -
24 V DC
DC
DC
Rated value (DC)
24 V
24 V
24 V
24 V
Yes
Yes
Yes
Yes
Mains buffering
Mains/voltage failure stored
energy time
5 ms
5 ms
5 ms
5 ms
32
32
64
Hardware configuration
Rack
maximum
Interfaces
Number of
PROFINET interfaces
Number of
PROFIBUS interfaces
9/2
Siemens AG 2014

ET 200SP
IM 155-6
1st interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
- RS 485
- Bus adapter (PROFINET)
- Output current of the
interface, max.
Protocols
- PROFIBUS DP slave
- Media redundancy
Interface types
RJ 45 (Ethernet)
10 Mbps
100 Mbps
Transmission procedure
Autonegotiation
Autocrossing
6ES7155-6AA00-0BN0
6ES7155-6AU00-0BN0
IM 155-6 PN ST with
IM 155-6 PN ST
6ES7155-6AU00-0CN0
IM 155-6 PN HF
with server module
2
Yes
Yes; Pre-assembled
BusAdapter BA 2x RJ45
2
Yes
2
Yes
6ES7155-6BA00-0CN0
Yes
Yes; Applicable BusAdapters: Yes; Applicable BusAdapters: Yes
BA 2x RJ45, BA 2x FC
BA 2x RJ45, BA 2x FC
90 mA
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; As MRP or MRPD client;

max. 50 or 30 devices in the
ring
Yes; for Ethernet services

Yes; PROFINET with
100 Mbit/s full duplex
(100BASE-TX)
PROFINET with 100 Mbit/s full
duplex (100BASE-TX)
Yes
Yes

Yes; PROFINET with
(100BASE-TX)
duplex (100BASE-TX)
Yes
Yes

Yes; PROFINET wit
h 100 Mbit/s full duplex
(100BASE-TX)
duplex (100BASE-TX)
Yes
Yes
Yes
RS485
Transmission rate, max.
Protocols
Supports protocol for
PROFINET IO
PROFINET IO Device
Services
- Isochronous mode
- IRT, supported
MRP, supported
MRPD, supported
PROFIenergy
Prioritized startup
Shared device
Number of IO controllers
with shared device, max.
TCP/IP
SNMP
LLDP
PROFIBUS
Services
- SYNC capability
- FREEZE capability
- DPV0
- DPV1
12 Mbit/s
Yes
Yes
Yes
9
Yes
Yes; with send cycles of
between 250 s and 4 ms in
increments of 125 s
Yes
Yes; with send cycles of
between 250 s and 4 ms in
increments of 125 s
Yes
Yes
Yes
Yes
Yes
2
Yes
Yes
Yes; 250 s, 500 s, 1 ms, 2
ms, 4 ms additionally with IRT
with high performance: 250 s
to 4 ms in 125 s frame
Yes
Yes
Yes
Yes
Yes
4
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
9/3
Siemens AG 2014

ET 200SP
IM 155-6

6ES7155-6AA00-0BN0
6ES7155-6AU00-0BN0
IM 155-6 PN ST with
IM 155-6 PN ST
Isochronous mode
(application synchronized up
to terminal)
Yes
equidistance
Yes
shortest clock pulse
250 s
max. cycle
4 ms
6ES7155-6BA00-0CN0
status information
Status indicator
Yes
Yes
Yes
Yes
Alarms
Alarms
Yes
Yes
Yes
Yes
Diagnostic messages
Yes
Yes
Yes
Yes
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; Green LED
Yes
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; Green LED
Yes; 2x green LED
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; Green LED
Yes; 2x green LED
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; green PWR LED

RUN LED
ERROR LED
MAINT LED
Connection display
LINK TX/RX
Connection display DP
Isolation
6ES7155-6AU00-0CN0
IM 155-6 PN HF
with server module
Yes; Green DP LED

707 V DC between supply
voltage and electronics;
1500 V AC between Ethernet
and electronics

voltage and electronics
(type test); 1500 V AC
between Ethernet and
electronics (type test)

voltage and electronics
(type test); 1500 V AC
between Ethernet and
electronics (type test)
According to Security Level 1

Test Cases V1.1.1

Test Cases V1.1.1

Test Cases V1.1.1
Ambient conditions
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
Dimensions
Width
50 mm
50 mm
50 mm
50 mm
Height
117 mm
117 mm
117 mm
117 mm
Depth
74 mm
74 mm
74 mm
74 mm
Weights
Weight, approx.
191 g
147 g; without bus adapter
147 g; without bus adapter
150 g
Standards, approvals,
certificates
Network loading class
Security level
9/4
Siemens AG 2014

ET 200SP
IM 155-6
Ordering data
Interface module Standard
IM 155-6PN ST, with server
module and installed BusAdapter
BA 2xRJ45
IM 155-6PN ST, with server
module, without BusAdapter
Interface module High Feature
IM 155-6DP HF, with server
module, with multi-hot-swap,
incl. PROFIBUS connector
IM 155-6PN HF, incl. server
module, without BusAdapter
Article No.
6ES7155-6AA00-0BN0
6ES7155-6AU00-0BN0
6ES7155-6BA00-0CN0
6ES7155-6AU00-0CN0
Accessories
Digital input module
DI 8x24 V DC Standard,
BU type A0,
color code CC01
6ES7131-6BF00-0BA0

BU type A0, color code CC00
6ES7131-6BH00-0BA0

DI 8x24 V DC High Feature,
BU type A0, color code CC01,
channel-specific diagnostics,
isochronous mode,
shared input (MSI)
6ES7131-6BF00-0CA0

DI 8x24 V DC Source Input, Basic,
6ES7131-6BF60-0AA0

DI 8xNAMUR High Feature,
6ES7131-6TF00-0CA0

DI 4x120 V AC-230 V AC Standard,
BU type B1, color code CC41
6ES7131-6FD00-0BB1
Fail-safe digital input module

F-DI 8x24 V DC High Feature,
SIL3/Cat.4/PLe
6ES7136-6BA00-0CA0

Digital output module
DQ 4x24 V DC/2 A Standard,
6ES7132-6BD20-0BA0

DQ 4x24 V DC/2 A High Feature,
channel-precise diagnostics,
isochronous mode,
shared output (MSO)
6ES7132-6BD20-0CA0

DQ 4x24 V AC-230 V AC/2 A
Standard for BU type B1,
color code CC41
6ES7132-6FD00-0BB1

DQ 8x24 V DC/0.5 A Standard,
6ES7132-6BF00-0BA0

DQ 8x24 V DC/0.5 A High Feature,
6ES7132-6BF00-0CA0

DQ 8x24 V DC/0.5 A Sink output,
Basic, BU type A0,
color code CC01
6ES7132-6BF60-0AA0

6ES7132-6BH00-0BA0
Article No.
Relay module
RQ NO 4x120 V DC - 230 V AC/5 A
Standard, normally-open,
6ES7132-6HD00-0BB0
Signal relay module

RQ CO 4x24 V UC/2 A Standard,
changeover contact, BU type A0,
color code CC00
6ES7132-6GD50-0BA0
Fail-safe digital output module

F-DQ 4x24 V DC High Feature,
SIL3/Cat.4/PLe
6ES7136-6DB00-0CA0
Fail-safe digital F output module

relay 1 F-RQ, BU type F0, relay
output (2 NO contacts), total output
current 5 A, load voltages 24 V DC
and 24...230 V AC; can be used up
to SIL3 /Category 4/PLe if controlled
via F-DQ
6ES7136-6RA00-0BF0

Analog input module
AI 4xU/I 2-wire Standard,
BU type A0 or A1,
color code CC03, 16 bit, 0.3%
6ES7134-6HD00-0BA1
Analog input module

AI 4xI 2-/4-wire Standard,
BU type A0 or A1,
6ES7134-6GD00-0BA1
Analog input module

AI 4xRTD/TC 2-, 3-, 4-wire High
Feature, BU type A0 or A1,
color code CC00, 16 bit, 0.1%,
scalable measuring range
6ES7134-6JD00-0CA1
Analog input module

AI 2xU/I 2-/4-wire High Speed,
BU type A0 or A1, color code
CC00, 16 bit, 0.3%, isochronous
mode above 250 s, oversampling
above 50 s
6ES7134-6HB00-0DA1
Analog input module

AI 8xRTD/TC 2-wire High Feature,
CC00, 16 bit, 0.1%, scalable
measuring range
6ES7134-6JF00-0CA1
Analog input module

AI 2xU/I 2-/4-wire High Feature,
CC05, 16 bit, 0.1%, independent
channel isolation, isochronous
mode above 1 ms
6ES7134-6HB00-0CA1
Analog input module

AI Energy Meter Standard,
BU type D0, color code CC00
6ES7134-6PA00-0BD0

Analog output module
AQ 4xU/I Standard,
BU type A0 or A1,
6ES7135-6HD00-0BA1

AQ 2xU/I High Speed,
BU type A0 or A1,
6ES7135-6HB00-0DA1

AQ 2xU/I High Feature,
BU type A0 or A1,
6ES7135-6HB00-0CA1
9/5
Siemens AG 2014

ET 200SP
IM 155-6
Ordering data
Article No.
Communication modules
Communication module
CM 1xPtP Standard, for serial
communication connections with
RS232, RS422, RS485 interfaces.
BU type A0,
color code CC00
6ES7137-6AA00-0BA0

installation cables
CM 4xIO-Link Master V1.1

Standard communication module,
for connecting up to 4 IO-Link
devices, time-based IO,
6ES7137-6BD00-0BA0
IE FC RJ45 Plug 180
CM AS-i Master ST communication

module, BU type C0 or C1,
color code CC00
180 cable outlet
3RK7137-6SA00-0BC1
Fail-safe power module

F-PM-E 24 V DC/8 A PPM Standard,
BU type C0, color code CC52,
2 inputs, 1 output, SIL3/Cat.4/PLe
6ES7136-6PA00-0BC0
BusAdapter BA 2xRJ45
6ES7193-6AR00-0AA0
BusAdapter BA 2xFC for

increased vibration and
EMC loads
6ES7193-6AF00-0AA0
BusAdapter BA 2xSCRJ,
fiber-optic connection for POF
or PCF cables up to 250 m,
with monitoring of damping
6ES7193-6AP00-0AA0
6ES7193-6LF30-0AW0
6ES7193-6SC00-1AM0
Labeling strips
500 labeling strips on roll, light gray,
for inscription with thermal transfer
roll printer
6ES7193-6LR10-0AA0
500 labeling strips on roll, yellow,

roll printer
6ES7193-6LR10-0AG0
1000 labeling strips DIN A4, light

gray, card, for inscription with laser
printer
6ES7193-6LA10-0AA0
9/6
6GK1901-1BB10-2AE0
Length: 483 mm for 19" cabinets
6ES5710-8MA11
Length: 530 mm for 600 mm

cabinets
6ES5710-8MA21
Length: 830 mm for 900 mm

cabinets
6ES5710-8MA31
Length: 2 m
6ES5710-8MA41
ET 200SP library:
ET 200SP Manual Collection,
comprising system manual, product
information, and device manuals
http://www.siemens.com/simaticdocu
Shield connection
1000 labeling strips DIN A4, yellow,

card, for inscription with laser
printer
6GK1901-1BB10-2AB0
50 units
Manuals can be downloaded from

the Internet as PDF files:
10 sheets of 16 labels
5 shield connections and 5 shield

terminals each for plugging onto
BaseUnits with automatic lowimpedance connection to functional
ground
6GK1901-1BB10-2AA0
10 units
Manuals for ET 200SP distributed

I/O system
Can only be used with High Feature

interface modules
Reference identification label
1 unit
DIN rail 35 mm
Special modules
Article No.
IE FC RJ45 plugs

6ES7998-8XC01-8YE2

Spare parts
Server module
6ES7193-6LA10-0AG0
6ES7998-8XC01-8YE0

multi-language: LOGO!, SIMADYN,
6ES7193-6PA00-0AA0
Power supply connector for

interface module
For connecting the 24 V DC supply
voltage
With push-in terminals (10 units)
6ES7193-4JB00-0AA0
With screw-type terminals (10 units)
6ES7193-4JB50-0AA0
Siemens AG 2014

ET 200SP
I/O modules
Overview
4-, 8- and 16-channel digital input modules for the ET 200SP

Can be plugged onto BaseUnits with automatic coding
LED display for error, operation, supply voltage and status
Clear labeling on front of module
- Plain text identification of the module type and function class
- 2D matrix code (order and serial number)
- Connection diagram
- Color coding of the module type DI: White
- Hardware and firmware version
- Color code CC for module-specific color coding of the
potentials at the terminals of the BU
- Complete Article No.
Optional labeling accessories
- Labeling Strips
- Reference identification label
Optional module-specific color identification of the terminals
according to the color code CC
Optional system-integrated shield connection
General information
Product function
I&M data
Engineering with
configured/integrated as
of version
STEP 7 can be
of version
PROFIBUS as of GSD
PROFINET as of GSD
6ES731-6BF000BA0
6ES7131-6BF600AA0
DI 8x24VDC ST
Yes
6ES7131-6BH000BA0
6ES7131-6BF000CA0
6ES7131-6TF000CA0
6ES7131-6FD00-0BB1
DI 8x24VDC SRC BA DI 16x24VDC ST
DI 8x24VDC HF
DI 8xNAMUR HF
DI 4x120 ... 230VAC ST
Yes
Yes
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
V12 SP1 / V13
V13 / V13
V13 / V13
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
GSD Revision 5
V2.3
V2.3 / -
Yes
V13 / V13
V5.5 SP3 / -
V5.5 SP3 / -
GSD as of Revision GSD Revision 5

5
V2.3 / V2.3 / -
V5.5 SP3 / -
GSD as of Revision GSD Revision 5

5
V2.3 / V2.3 / -
Operating mode
MSI
Yes
Supply voltage
DC
24 V DC
DC
DC
24 V DC
Rated value (DC)
24 V
24 V
24 V
24 V
24 V
Reverse polarity protection Yes
Yes
Yes
Yes
Yes
Yes
Encoder supply
Number of outputs
Yes
No
Rated value (AC)
230 V
9/7
Siemens AG 2014

ET 200SP
I/O modules

6ES731-6BF000BA0
6ES7131-6BF600AA0
6ES7131-6BH000BA0
DI 8x24VDC ST
6ES7131-6BF000CA0
6ES7131-6TF000CA0
6ES7131-6FD00-0BB1
DI 8x24VDC HF
DI 8xNAMUR HF
DI 4x120 ... 230VAC ST
Output current
up to 60 C, max.
10 A
24 V encoder supply
24 V
Yes
Yes
700 mA
Digital inputs
Yes
Yes
700 mA
8
16
Type
NAMUR
m/p-reading
Yes; m-reading
Input characteristic curve Yes

in accordance with
IEC 61131, type 1
Yes
Input characteristic curve

in accordance with
IEC 61131, type 2
No
Input characteristic curve Yes

in accordance with
IEC 61131, type 3
Yes
Pulse extension
Length
No
No
Yes
Yes
Yes
Yes
Yes
50 ms, 100 ms,
200 ms, 500 ms,
1 s, 2 s
Yes
Yes; 0.5 s, 1 s, 2 s
Edge evaluation
Yes; rising edge,

falling edge, edge
change
Signal change flutter
Yes; 2 to 32 signal
changes
Flutter observation window
Yes; 0.5 s, 1 s to
100 s in 1-s steps
Input voltage
Rated value, AC
Rated value, DC
for signal "0"
for signal "1"
DC
DC
DC
DC
DC
24 V
-30 to 5 V
11 to 30 V
24 V
24 V
-30 to 5 V
11 to 30 V
24 V
-30 to +5 V
11 to 30 V
8.2 V
2.5 mA
2.5 mA
No
230 V
Input current
2.5 mA
for 10 k switched contact
- for signal "0"
- for signal "1"
for unswitched contact
- for signal "0", max.
(permissible quiescent
current)
- for signal "1"
for NAMUR encoders
- for signal "0"
- for signal "1"
9/8
Yes
6 mA
0 to 40 V AC
10.8 mA
0.35 to 1.2 mA
2.1 to 7 mA
0.5 mA
typ. 8 mA
0.35 to 1.2 mA
2.1 to 7 mA
Siemens AG 2014

ET 200SP
I/O modules

6ES731-6BF000BA0
6ES7131-6BF600AA0
DI 8x24VDC ST
Input delay (for rated value

of input voltage)
Tolerated changeover
time for changeover
contacts
for standard inputs
- Parameterizable
Yes; 0.05 / 0.1 / 0.4 /
0.8 / 1.6 / 3.2 / 12.8 /
20 ms (in each case
+ delay of 30 to
500 s, depending
on line length)
- Parameterizable
for counter/technological
functions
- Parameterizable
for NAMUR inputs
- at "0" to "1", max.
- at "1" to "0", max.
Cable length
max.
Cable length unshielded, 600 m
max.
6ES7131-6BH000BA0
6ES7131-6BF000CA0
6ES7131-6TF000CA0
6ES7131-6FD00-0BB1
DI 8x24VDC HF
DI 8xNAMUR HF
DI 4x120 ... 230VAC ST
300 ms
Yes; 0.05 / 0.1 / 0.4 /

0.8 / 1.6 / 3.2 / 12.8 /
20 ms (in each case
+ delay of 30 to
500 s, depending
on line length)
Yes; 0.05 / 0.1 / 0.4 /

0.8 / 1.6 / 3.2 / 12.8 /
20 ms (in each case
+ delay of 30 to
500 s, depending
on line length)
No
Yes; 0.05 / 0.1 / 0.4 /

0.8 / 1.6 / 3.2 / 12.8 /
20 ms (in each case
+ delay of 30 to
500 s, depending
on line length)
No
Yes
No
12 ms
12 ms
1 000 m
1 000 m
1 000 m
200 m
600 m
600 m
600 m
Encoder
2-wire sensor
Yes
- Permissible quiescent 1.5 mA
current (2-wire sensor),
max.
Yes
1.5 mA
Yes
1.5 mA
Yes
1.5 mA
Yes
Isochronous mode
(application synchronized
up to terminal)
No
Yes
No
Filtering and processing

time (TCI), min.
420 s
500 s
status information
Alarms
Diagnostic alarm
Hardware interrupt
Yes
Yes
No
Yes
Yes
Yes
200 m
Yes; channel by
channel
Yes;
Parameterizable,
channels 0 to 7
1 000 m
No
No
9/9
Siemens AG 2014

ET 200SP
I/O modules
Diagnostic messages
Diagnostic information
readable
Diagnostics
voltage
Wire break
Short circuit
Group error
LED
voltage
Galvanic isolation
channels
Isolation
Ambient conditions
min.
max.
6ES731-6BF000BA0
6ES7131-6BF600AA0
6ES7131-6BH000BA0
DI 8x24VDC ST
6ES7131-6BF000CA0
6ES7131-6TF000CA0
6ES7131-6FD00-0BB1
DI 8x24VDC HF
DI 8xNAMUR HF
DI 4x120 ... 230VAC ST
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; green PWR

LED
Yes; Green LED
Yes; Red LED
Yes; green/red
DIAG LED
Yes; green PWR LED
Yes
Yes
Yes; green PWR

LED
Yes; Green LED
Yes; green PWR LED Yes; green PWR

LED
Yes; Green LED
Yes; Green LED
Yes; green/red
DIAG LED
Yes; green/red DIAG Yes; green/red

LED
DIAG LED
Yes; green PWR

LED
Yes; Green LED
Yes; Red LED
Yes; green/red
DIAG LED
Yes
Yes
Yes
Yes
Yes
Yes; Green LED

No
Yes; green/red DIAG
LED
707 V DC (type test) 707 V DC (type test) 707 V DC (type test) 707 V DC (type test) 707 V DC (type test)
0 C
0 C
60 C
60 C
0 C
50 C
0 C
50 C
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
15 mm
20 mm
Weights
Weight, approx.
28 g
28 g
28 g
28 g
32 g
36 g
9/10
Siemens AG 2014

ET 200SP
I/O modules
Ordering data
Article No.
Article No.
Accessories

6ES7131-6BF00-0BA0

6ES7131-6BH00-0BA0
Labeling strips
6ES7193-6LR10-0AA0

DI 8x24 V DC High Feature,
channel-specific diagnostics,
isochronous mode,
shared input (MSI)
6ES7131-6BF00-0CA0

roll printer
roll printer
6ES7193-6LR10-0AG0
6ES7131-6BF60-0AA0

printer
6ES7193-6LA10-0AA0

DI 8x24 V DC Source Input, Basic,
6ES7193-6LA10-0AG0

DI 8xNAMUR High Feature,
6ES7131-6TF00-0CA0

printer

DI 4x120 V AC-230 V AC Standard,
6ES7131-6FD00-0BB1
BU cover
6ES7193-6BP00-0DA0
BU type A0; BaseUnit (light)

with 16 process terminals to the
module; for starting a new load
group (max. 10 A)
BU15-P16+A0+2B
6ES7193-6BP00-0BA0
BU type A0; BaseUnit (dark)

module; for continuing the load
group
BU15-P16+A10+2D
6ES7193-6BP20-0DA0

with 16 process terminals (1...16) to
the module and an additional 10
internally jumpered AUX terminals
(1 A to 10 A); for starting a new load
group (max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP20-0BA0

with 16 process terminals (1...16) to
the module and an additional 10
internally jumpered AUX terminals
(1 A to 10 A); for continuing the load
group
BU20-P12+A0+4B
6ES7193-6LF30-0AW0
Usable BaseUnits
BU15-P16+A0+2D
For covering empty slots (gaps);

5 units
15 mm wide
6ES7133-6CV15-1AM0
Shield connection
6ES7193-6SC00-1AM0
5 shield supports and 5 shield

terminals
Color-coded labels
Color code CC01, modulespecific, for 16 push-in terminals;
for BaseUnit type A0, A1; 10 units
Color code CC71, for 10 AUX
terminals 1 A to 10 A,
for BU type A0, yellow/green, with
push-in terminals; 10 units
Color code CC72,
for 10 AUX terminals 1 A to 10 A,
for BU type A0, red, with push-in
terminals; 10 units
Color code CC73,
for BU type A0, blue, with push-in
terminals; 10 units
Color code CC41,
module-specific, for 12 push-in
terminals; for BaseUnit type B1;
10 units
6ES7193-6CP01-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP41-2MB0
6ES7193-6BP20-0BB1
BU type B1; BaseUnit (dark)

group
9/11
Siemens AG 2014

ET 200SP
I/O modules
Overview
4-, 8- and 16-channel digital output modules for the ET 200SP

Can be plugged onto BaseUnits with automatic coding
- Color coding of the module type DQ: black
- Labeling strips
General information
Product function
I&M data
6ES7132-6BD20-0BA0
6ES7132-6BD20-0CA0
6ES7132-6FD00-0BB1
6ES7132-6BF00-0BA0
6ES7132-6BF00-0CA0
DQ 4x24VDC/2A ST
DQ 4x24VDC/2A HF
DQ 4x24 ... 230VAC/2A
DQ 8x24VDC/0.5A ST
DQ 8x24VDC/0.5A HF
Yes
Yes
Yes; I&M0 to I&M3
Yes
Yes
V13 / V13
V13 / V13
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
GSD Revision 5
GSD Revision 5
GSD Revision 5
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Engineering with
of version
STEP 7 can be
V5.5 SP3 / configured/integrated as
of version
PROFIBUS as of GSD
PROFINET as of GSD
V2.3 / version/GSD revision
Operating mode
MSO
V13 / V13
Yes
Yes
Supply voltage
DC
DC
DC
DC
Rated value (DC)
24 V
24 V
24 V
24 V
Yes
Yes
Rated value (AC)
230 V
Yes
Digital outputs
Current-sinking
No
Current-sourcing
Yes
Digital outputs,
configurable
9/12
Yes
No
Yes
Yes
No
Yes
Siemens AG 2014

ET 200SP
I/O modules

6ES7132-6BD20-0BA0
6ES7132-6BD20-0CA0
6ES7132-6FD00-0BB1
6ES7132-6BF00-0BA0
6ES7132-6BF00-0CA0
DQ 4x24VDC/2A ST
DQ 4x24VDC/2A HF
DQ 4x24 ... 230VAC/2A
DQ 8x24VDC/0.5A ST
DQ 8x24VDC/0.5A HF
Typ. L+ (-50 V)
Typ. L+ (-50 V)
Open-circuit detection
No
Overload protection
No
shutdown voltage to
Typ. L+ (-50 V)
L+ -(37 to 41V)
Yes
Yes; Minimum current

consumption 7 mA
Yes
Yes
Yes

outputs
with resistive load, max. 2 A
on lamp load, max.
10 W
2A
10 W
2A
100 W
0.5 A
5W
0.5 A
5W

lower limit
upper limit
12
3 400
48
12 k
48
12 k
2A
460 A
0.5 A
0.1 mA
0.5 A
0.1 mA
10 ms
10 ms
50 s
100 s
50 s
100 s
50 s
100 s
12
3 400
Output voltage
Permissible voltage at
output, min.
Permissible voltage at
output, max.
DC
20.4 V
20.4 V
264 V
Output current
for signal "1" rated value 2 A
0.1 mA
for signal "0" residual
current, max.
Output delay with resistive
load
"0" to "1", max.
"1" to "0", max.
"0" to "1", typ.
"1" to "0", typ.
50 s
100 s
50 s
100 s
Parallel switching of
2 outputs
for logic links
for increased power
No
for redundant control of a Yes
load
2A
0.1 mA
50 s
100 s
No
No
No
Yes
No
Yes
No
Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
10 Hz
on lamp load, max.
100 Hz
2 Hz
10 Hz
10 Hz
0.5 Hz
1 Hz
100 Hz
2 Hz
10 Hz
100 Hz
2 Hz
10 Hz

outputs
Max. current per module 8 A
8A
2A
8A
4A
4A
Total current of the outputs

(per module)
horizontal installation
- up to 40 C, max.
- up to 50 C, max.
- up to 60 C, max.
vertical installation
- up to 30 C, max.
- up to 40 C, max.
- up to 50 C, max.
- up to 60 C, max.
8A
6A
4A
6A
4A
4A
8A
6A
4A
8A
6A
4A
9/13
Siemens AG 2014

ET 200SP
I/O modules

6ES7132-6BD20-0BA0
6ES7132-6BD20-0CA0
6ES7132-6FD00-0BB1
6ES7132-6BF00-0BA0
6ES7132-6BF00-0CA0
DQ 4x24VDC/2A ST
DQ 4x24VDC/2A HF
DQ 4x24 ... 230VAC/2A
DQ 8x24VDC/0.5A ST
DQ 8x24VDC/0.5A HF
Output current per

channel
- up to 60 C, max.
- up to 50 C, max.
2A
2A
Triac outputs
according to NEMA,
max.
Cable length
max.
Cable length unshielded, 600 m
max.
Isochronous mode
up to terminal)
1 000 m
1 000 m
1 000 m
1 000 m
600 m
600 m
600 m
600 m
Yes
No
Yes
48 s
Execution and activation

time (TCO), min.
500 s

status information
Substitute values
connectable
Alarms
Diagnostic alarm
Diagnostic messages
voltage
Wire break
Short circuit
LED
voltage
Galvanic isolation
channels
Isolation
Ambient conditions
min.
max.
500 s
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; green PWR LED
Yes; green PWR LED
Yes; green PWR LED
Yes; green PWR LED
Yes; Green LED
Yes; Green LED

Yes; Green LED
Yes; Green LED
Yes; Green LED
Yes; Red LED
No
Yes; Red LED
Yes; green/red DIAG LED Yes; green/red DIAG LED Yes; green/red DIAG LED Yes; green/red DIAG LED Yes; green/red DIAG LED
Yes
Yes
Yes
Yes
Yes
0 C
0 C
60 C
60 C
0 C
50 C
0 C
50 C
Dimensions
Width
15 mm
15 mm
20 mm
15 mm
15 mm
Weights
Weight, approx.
30 g
30 g
50 g
28 g
30 g
9/14
Siemens AG 2014

ET 200SP
I/O modules

General information
Product function
I&M data
Engineering with
version
STEP 7 can be configured/
integrated as of version
PROFIBUS as of GSD
PROFINET as of GSD
6ES7132-6BF60-0AA0
DQ 8x24VDC/0.5A SNK BA
6ES7132-6BH00-0BA0
DQ 16x24VDC/0.5A ST
6ES7132-6HD00-0BB0
6ES7132-6GD50-0BA0
RQ 4x120VDC-230VAC/5A NO ST RQ 4x24VUC/2A CO ST
Yes; I&M0 to I&M3
Yes
Yes; I&M0 to I&M3
Yes
V12 SP1 / V13
V13 / V13
V13 / V13
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 SP3 / -
GSD Revision 5
GSD Revision 5
GSD Revision 5
GSD Revision 5
V2.3 / -
V2.3 / -
V2.3 / -
V2.3 / -
Operating mode
Multi-output
Oversampling
MSI
MSO
No
No
No
No
Supply voltage
24 V DC
DC
DC
DC
Rated value (DC)
24 V
24 V
24 V
24 V
Yes
Yes

Digital outputs
Current-sinking
Yes
Yes
Yes
No
shutdown voltage to
Typ. 47 V
Typ. L+ (-50 V)
Yes
Yes

outputs
on lamp load, max.
0.5 A
5W
0.5 A
5W

lower limit
upper limit
48
3 400
48
12 k
Output voltage
DC
Output current
0.5 A
for signal "0" residual current, 5 A
max.
"0" to "1", max.
300 s
"1" to "0", max.
600 s
"0" to "1", typ.
"1" to "0", typ.
for increased power
for redundant control of a
load
No
Yes
16
Yes
0.5 A
0.1 mA
50 s
100 s
No
Yes
No
9/15
Siemens AG 2014

ET 200SP
I/O modules

6ES7132-6BF60-0AA0
DQ 8x24VDC/0.5A SNK BA
6ES7132-6BH00-0BA0
DQ 16x24VDC/0.5A ST
6ES7132-6HD00-0BB0
6ES7132-6GD50-0BA0
RQ 4x120VDC-230VAC/5A NO ST RQ 4x24VUC/2A CO ST
Switching frequency
on lamp load, max.
100 Hz
0.5 Hz
10 Hz
100 Hz
2 Hz
10 Hz
2 Hz
0.5 Hz
2 Hz
2 Hz

outputs
0.5 A
4A
8A
20 A
8A
4
24 V
4
24 V
40 mA
40 mA
Relay outputs
Rated input voltage of relay
coil L+ (DC)
Current consumption of
relays (coil current of all
relays), max.
external protection for relay
outputs
Switching capacity of
contacts
- with resistive load, max.
- Thermal continuous
current, max.
- rated switching voltage
(DC)
- rated switching voltage
(AC)
Yes, with 6A
5A
24 V
24 V
Cable length
Cable length unshielded,
max.
2A
2A
1 000 m
600 m
1 000 m
200 m
1 000 m
200 m
status information
Yes
Yes
Yes
Alarms
Diagnostic alarm
Yes
Yes
Yes
Diagnostic messages
Diagnostics
Yes
Monitoring the supply voltage Yes
Wire break
Short circuit
Yes
Yes
Yes
Yes
Yes

Monitoring the supply voltage Yes; green PWR LED
Yes; Green LED
Yes; green/red DIAG LED
Yes; green PWR LED

Yes; Green LED
Yes; green PWR LED

Yes; Green LED
Yes; green PWR LED

Yes; Green LED
Yes
Yes
Yes
Yes
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
Isochronous mode
up to terminal)
Galvanic isolation
between the channels and
the backplane bus
Isolation
No
Ambient conditions
Dimensions
Width
15 mm
15 mm
20 mm
15 mm
Weights
Weight, approx.
30 g
28 g
40 g
30 g
9/16
Siemens AG 2014

ET 200SP
I/O modules
Ordering data
Article No.
Article No.
BU20-P12+A4+0B

DQ 4x24 V DC/2 A Standard,
6ES7132-6BD20-0BA0

DQ 4x24 V DC/2 A High Feature,
channel-precise diagnostics,
isochronous mode,
shared output (MSO)
6ES7132-6BD20-0CA0

DQ 4x24 V AC-230 V AC/2 A
Standard for BU type B1,
color code CC41
6ES7132-6FD00-0BB1

6ES7132-6BF00-0BA0

DQ 8x24 V DC/0.5 A High Feature,
6ES7132-6BF00-0CA0

DQ 8x24 V DC/0.5 A Sink Output,
Basic, BU type A0,
color code CC01
6ES7132-6BF60-0AA0

6ES7193-6BP20-0BB0

with 12 process terminals (1...12)
to the module and an additional
4 internally jumpered AUX terminals
group
BU20-P12+A0+4B
6ES7193-6BP20-0BB1

group
Accessories
6ES7193-6LF30-0AW0
Labeling strips
roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0
6ES7132-6BH00-0BA0

printer
6ES7193-6LA10-0AA0
Relay module RQ NO
4x120 V DC - 230 V AC/5 A
Standard, normally-open,
6ES7132-6HD00-0BB0

printer
6ES7193-6LA10-0AG0
Signal relay module RQ CO

4x24 V UC/2 A Standard,
changeover contact,
6ES7132-6GD50-0BA0
BU cover
Usable BaseUnits
BU15-P16+A0+2D
6ES7193-6BP00-0DA0
6ES7193-6BP00-0BA0

group
BU15-P16+A10+2D
6ES7193-6BP20-0DA0

10 internally jumpered
AUX terminals (1 A to 10 A);
for starting a new load group
(max. 10 A)
BU15-P16+A10+2B
for continuing the load group
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals

group (max. 10 A)
BU15-P16+A0+2B

5 units
15 mm wide
20 mm wide
6ES7193-6BP20-0BA0
Color-coded labels
Color code CC01,
module-specific,
for 16 push-in terminals;
Color code CC02,
module-specific,
Color code CC71,
for BU type A0, yellow/green,
with push-in terminals; 10 units
Color code CC72,
for BU type A0, red,
Color code CC73,
for BU type A0, blue,
Color code CC41,
module-specific,
for BaseUnit type B1; 10 units
6ES7193-6CP01-2MA0
6ES7193-6CP02-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP41-2MB0
9/17
Siemens AG 2014

ET 200SP
I/O modules
Overview
2-, 4- and 8-channel analog input modules for the ET 200SP
Can be plugged into type A0 or A1 BaseUnits (BU) with
automatic coding
- Color coding of the module type AI: Light blue
- Labeling strips
General information
Product function
I&M data
6ES7134-6HD00-0BA1
AI 4xU/I 2-wire ST
6ES7134-6GD00-0BA1
AI 4xI 2-/4-wire ST
6ES7134-6JD00-0CA1
AI 4xRTD/TC 2-/3-/4-wire HF
Yes
Yes
Yes; I&M0 to I&M3
Engineering with
STEP 7 can be configured/integrated V5.5 SP3 / as of version
PROFIBUS as of GSD version/GSD
GSD Revision 5
revision
V2.3 / revision
V12 SP1 / V13

V5.5 SP3 / -
V5.5 SP3 / V5.5 SP4
GSD Revision 5
GSD Revision 5
V2.3 / -
GSDML V2.3
CiR - Configuration in RUN

Reparameterization possible in RUN
Yes
Calibration possible in RUN
Yes
Supply voltage
Rated value (DC)
24 V
24 V
24 V
Yes
Yes
Yes
Analog inputs
permissible input voltage for voltage

input (destruction limit), max.
30 V
30 V
2 mA
Constant measurement current for

resistance-type transmitter, typ.
Cycle time (all channels), min.
Technical unit for temperature

measurement adjustable
9/18
Sum of the basic conversion times and

additional processing times
(depending on the parameterization of
the active channels)


the active channels); for line compensation in case of a three-wire
connection, an additional cycle is
necessary
Yes
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6HD00-0BA1
AI 4xU/I 2-wire ST
Input ranges (rated values), voltages
0 to +10 V
1 to 5 V
-1 V to +1 V
-10 V to +10 V
-250 mV to +250 mV
-5 V to +5 V
-50 mV to +50 mV
-80 mV to +80 mV
Input ranges (rated values), currents
0 to 20 mA
-20 to +20 mA
4 to 20 mA
6ES7134-6GD00-0BA1
AI 4xI 2-/4-wire ST
6ES7134-6JD00-0CA1
Yes; 15 bit
Yes; 15 bit
Yes; 16 bit incl. sign
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit

thermoelements
Type B
Type C
Type E
Type J
Type K
Type L
Type N
Type R
Type S
Type T
Type U
Type TXK/TXK(L) to GOST

Input ranges (rated values), resistance

thermometers
Cu 10
Ni 100
Ni 1000
LG-Ni 1000
Ni 120
Ni 200
Ni 500
Pt 100
Pt 1000
Pt 200
Pt 500


0 to 150 ohms
0 to 300 ohms
0 to 600 ohms
0 to 3000 ohms
0 to 6000 ohms
PTC
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Thermocouple (TC)
- Parameterizable
Yes
Resistance thermometer (RTD)

Cable length
30 V
1 000 m
1 000 m
200 m; 50 m with thermocouples
9/19
Siemens AG 2014

ET 200SP
I/O modules

Integrations and conversion
time/resolution per channel
Resolution with overrange (bit
including sign), max.
Basic conversion time, including
integration time, ms
- Additional processing time for
wire-break check
- Additional power line wire-break
check
interference frequency f1 in Hz
Conversion time (per channel)
Smoothing of measured values
Parameterizable
Encoder
Connection of signal encoders
for voltage measurement
for current measurement as 2-wire
transducer
Burden of 2-wire transmitter, max.
transducer
for resistance measurement with
2-conductor connection
6ES7134-6HD00-0BA1
AI 4xU/I 2-wire ST
6ES7134-6GD00-0BA1
AI 4xI 2-/4-wire ST
6ES7134-6JD00-0CA1
16 bit
16 bit
16 bit
Yes
Yes
Yes
16.6 / 50 / 60 Hz
16.6 / 50 / 60 Hz
2 ms; In the ranges resistance

thermometers, resistors and
thermocouples
2 ms; for 3/4 wire transducer
(resistance thermometer and resistor)
16.6 / 50 / 60 Hz
180 / 60 / 50 ms
180 / 60 / 50 ms
180 / 60 / 50 ms
Yes
Yes
Yes
Yes
Yes
Yes
650
Yes
Yes

f = n x (f1 +/- 1 %), f1 = interference
frequency
Series mode interference (peak value 70 dB
of interference < rated value of input
range), min.
common mode voltage, max.
10 V
90 dB
Diagnostic messages
Diagnostics
Wire break
Short circuit
Overflow/underflow
9/20
650
Yes
Yes
Errors/accuracies
Basic error limit
(operational limit at 25 C)
Voltage, relative to input area, (+/-)
0.3 %
Current, relative to input area, (+/-)
0.3 %
Resistance, relative to input area, (+/-)
status information
Alarms
Diagnostic alarm
Limit value alarm
Yes
0.05 %
0.3 %
0.05 %
70 dB
70 dB
10 V
90 dB
10 V
90 dB
Yes
Yes
Yes
Yes; two upper and two lower limit
values in each case
Yes
Yes
Yes; at 4 to 20 mA
Yes; with 1 to 5 V or 2-wire mode:
Short-circuit of the encoder supply to
ground or of an input to the encoder
supply
Yes
Yes
Yes
Yes; at 4 to 20 mA
Yes; 2-wire mode: Short-circuit of the
encoder supply to ground or of an
input to the encoder supply
Yes
Yes
Yes; channel by channel
Yes
Yes; channel by channel
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6HD00-0BA1
AI 4xU/I 2-wire ST
6ES7134-6GD00-0BA1
AI 4xI 2-/4-wire ST
6ES7134-6JD00-0CA1
Yes; Green LED

Yes; Green LED
Yes; Green LED

Yes; Green LED
Yes; Green/red LED
Yes; Green/red LED
Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes
Yes
Yes
Isolation
Ambient conditions
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
Dimensions
Width
15 mm
15 mm
15 mm
Weights
Weight, approx.
31 g
31 g
30 g
6ES7134-6HB00-0DA1
AI 2xU/I 2-/4-wire HS
6ES7134-6HB00-0CA1
AI 2xU/I 2-/4-wire HF
6ES7134-6JF00-0CA1
AI 8xRTD/TC 2-wire HF
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
Yes
V12 SP1 / V13
V13
V13
V5.5 SP3 / -
V5.5 SP3 / -
V5.5 / -
GSD Revision 5
GSD Revision 5
GSD Revision 5
GSDML V2.3
GSDML V2.3
V2.3
Yes
Yes
Yes
Yes

Galvanic isolation
backplane bus
General information
Product function
I&M data
Engineering with
STEP 7 can be configured/integrated
as of version
revision
revision
Operating mode
Oversampling
- Values per cycle max.
- Resolution min.
Yes
16
50 s

Yes

Supply voltage
DC
DC
Rated value (DC)
24 V
24 V
24 V
Yes
Yes
Yes
Analog inputs
30 V
30 V
30 V

Constant measurement current for
resistance-type transmitter, typ.
2 mA
9/21
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6HB00-0DA1
6ES7134-6HB00-0CA1
250 s

Yes
Technical unit for temperature

measurement adjustable
Input ranges (rated values), voltages
0 to +10 V
1 to 5 V
-1 V to +1 V
-10 V to +10 V
-250 mV to +250 mV
-5 V to +5 V
-50 mV to +50 mV
-80 mV to +80 mV
Input ranges (rated values), currents
0 to 20 mA
-20 to +20 mA
4 to 20 mA
6ES7134-6JF00-0CA1
Yes; 15 bit
Yes; 13 bit
Yes; 15 bit
Yes; 15 bit

Yes; 15 bit
Yes; 14 bit
Yes; 15 bit
Yes; 15 bit

thermoelements
Type B
Type C
Type E
Type J
Type K
Type L
Type N
Type R
Type S
Type T
Type U
Type TXK/TXK(L) to GOST

Input ranges (rated values), resistance

thermometers
Ni 100
Ni 1000
LG-Ni 1000
Ni 120
Ni 200
Ni 500
Pt 100
Pt 1000
Pt 200
Pt 500


0 to 150 ohms
0 to 300 ohms
0 to 600 ohms
0 to 3000 ohms
0 to 6000 ohms
PTC
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Yes; 15 bit
Thermocouple (TC)
- Parameterizable
Yes
9/22
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6HB00-0DA1
6ES7134-6HB00-0CA1
Resistance thermometer (RTD)

Cable length
Resolution with overrange (bit
including sign), max.
Basic conversion time, including
integration time, ms
- Additional processing time for
wire-break check
interference frequency f1 in Hz
Conversion time (per channel)
Basic execution time of the module
(all channels released)
Smoothing of measured values
Number of levels
Parameterizable
Encoder
Connection of signal encoders
for voltage measurement
transducer
Burden of 2-wire transmitter, max.
transducer
6ES7134-6JF00-0CA1
30 V
200 m
1 000 m
200 m; 50 m with thermocouples
16 bit
16 bit
16 bit
Yes
Yes
No
10 s
2 ms; In the ranges resistance

thermometers, resistors and
thermocouples
16.6 / 50 / 60 / 300 / 600 / 1.2 k / 2.4 k / 16.6 / 50 / 60 Hz
4.8 k
180 / 60 / 50 ms
1 ms
7; none; 2-/4-/8-/16-/32-/64-fold
Yes
6; none; 2-/4-/8-/16-/32-fold
Yes
Yes
Yes
Yes
Yes
650
Yes
650
Yes
Errors/accuracies
Basic error limit
Voltage, relative to input area, (+/-)
0.2 %
0.2 %
Current, relative to input area, (+/-)
Resistance, relative to input area, (+/-)
f = n x (f1 +/- 1 %), f1 = interference
frequency
Series mode interference (peak value
of interference < rated value of input
range), min.
common mode voltage, max.
35 V
90 dB
Yes
Yes
Yes
No
No
0.05 %; 0.1 % at SFU 4.8 kHz

0.05 %; 0.1 % at SFU 4.8 kHz
0.05 %
0.05 %
70 dB
35 V
90 dB
10 V
90 dB
9/23
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6HB00-0DA1
6ES7134-6HB00-0CA1
Yes
Yes
Filtering and processing time (TCI),

min.
130 s
800 s
250 s
1 ms
Yes
values in each case
Yes
values in each case
Yes
Yes
Yes
Yes
Yes; Measuring range 4 to 20 mA only Yes
Overflow/underflow
Yes
Yes
Yes; channel-by-channel, at 4 to 20
mA only
Yes; channel-by-channel, at 1 to 5 V or
for current measuring ranges shortcircuit in encoder supply
Yes
Yes; For 1 to 5 V or for current

measuring ranges short-circuit in
encoder supply
Yes
Yes

Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes
Yes
Yes
Isolation
Ambient conditions
0 C
60 C
0 C
50 C
Dimensions
Width
15 mm
15 mm
Weights
Weight, approx.
32 g
32 g
Isochronous mode
status information
Alarms
Diagnostic alarm
Limit value alarm
Diagnostic messages
Diagnostics
Wire break
Short circuit
Galvanic isolation
backplane bus
BU type D0, BU20-P12+A0+0B
Product function
Voltage measurement
Current measurement
Energy measurement
Frequency measurement
Active power measurement
Reactive power measurement
I&M data
Isochronous mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Operating mode
Cyclic measurement
Acyclic measurement
Yes
Yes
9/24
Yes
values in each case
0 C
60 C
0 C
50 C
6ES7134-6PA00-0BD0
General information
Usable BaseUnits
6ES7134-6JF00-0CA1
15 mm
6ES7134-6PA00-0BD0
Supply voltage
Description
Supply via voltage measurement

channel L1
100 - 240 V AC
Relative symmetrical tolerance of the

supply voltage
10 %
permissible range, lower limit (AC)
90 V
permissible range, upper limit (AC)
264 V
Power consumption without

expansion module, typ.
0.6 VA
Siemens AG 2014

ET 200SP
I/O modules

6ES7134-6PA00-0BD0
Line frequency
permissible frequency range, lower 47 Hz
limit
permissible frequency range, upper 63 Hz
limit
Address area
Address space per module
Address space per module, max.
Analog inputs
Cycle time (all channels), typ.
Resolution with overrange
(bit including sign), max.
44 byte; 32 byte input / 12 byte

output
50 ms
24 bit; Sigma-delta converter,

1.024 MHz
status information
Alarms
Diagnostic alarm
Limit value alarm
Yes
No

Yes
Yes
Yes
Yes
Measuring functions
Buffering of measured variables
Parameter length
Measuring procedure for voltage
measurement
Measuring procedure for current
measurement
Type of measured value acquisition
Curve shape of voltage
Operating mode for measured value
acquisition
- Automatic detection of line
frequency
- Fixation to 50 Hz
- Fixation to 60 Hz
Measuring range
Measuring inputs for voltage
- Measurable line voltage between
phase and neutral conductor
the line conductors
phase and neutral conductor, min.
phase and neutral conductor, max.
the line conductors, min.
the line conductors, max.
- Measurement category for voltage
measurement
- Power consumption per phase
No
44 byte
TRMS
TRMS
seamless
Sinusoidal or distorted
No; Parameterizable
No; Default setting
No
6ES7134-6PA00-0BD0
Measuring functions
Measuring inputs for current
- Measurable relative current (AC),
min.
- Measurable relative current (AC),
max.
- Continuous current (AC),
maximum permissible
- Apparent power consumption per
phase for measuring range 5 A
- Rated value short-time withstand
current restricted to 1 s
- Zero point suppression
- Surge strength for 1 s
Meter uncertainties
- Reference condition for
measurement accuracy
-
5 %; Relative to the secondary rated

current; 1 A, 5 A
100 %; Relative to the secondary
rated current; 1 A, 5 A
5A
0.6 VA
100 A
50 mA
10 A; for 1 minute
Symmetric load, rated current:
20-100%, 50 Hz; active power:
LF = 1, reactive power: LF = 0
0.5%
0.5%
0.5%
0.5%
for measured variable voltage

for measured variable current
for measured variable power
for measured variable active
power
- for measured variable reactive
0.5%
power
- for measured variable total active Class 1 acc. to IEC 62053-21:2003
energy
- for measured variable total
Class 2 acc. to IEC 62053-23:2003
reactive energy
Ambient conditions
Mounting position
Horizontal, vertical
Dimensions
Width
20 mm
Weights
Weight (without packaging)
45 g
other
Data for selecting a current transformer
Burden power current transformer 1.25 VA
x/1A, min.
Burden power current transformer 1.5 VA
x/5A, min.
Cable length (terminal-transformer) 200 m
dependent on Zn and Imax
45 Hz
65 Hz
230 V
400 V
90 V
264 V
155 V
460 V
CAT III acc. to IEC 61010 Part 1
20 mW
9/25
Siemens AG 2014

ET 200SP
I/O modules
Ordering data
Article No.
BU15-P16+A0+12D/T
Analog input module

AI 4xU/I 2-wire Standard,
BU type A0 or A1,
6ES7134-6HD00-0BA1
Analog input module

AI 4xI 2-/4-wire Standard,
BU type A0 or A1,
6ES7134-6GD00-0BA1
Analog input module

AI 4xRTD/TC 2-, 3-, 4-wire High
Feature, BU type A0 or A1,
6ES7134-6JD00-0CA1
Analog input module

AI 2xU/I 2-/4-wire High Speed,
BU type A0 or A1,
isochronous mode above 250 s,
oversampling above 50 s
6ES7134-6HB00-0DA1
Analog input module

AI 8xRTD/TC 2-wire High Feature,
BU type A0 or A1,
6ES7134-6JF00-0CA1
Analog input module

AI 2xU/I 2-/4-wire High Feature,
BU type A0 or A1,
independent channel isolation,
isochronous mode
above 1 ms
6ES7134-6HB00-0CA1
Analog input module

AI Energy Meter Standard,
BU type D0, color code CC00
6ES7134-6PA00-0BD0
BU20-P12+A0+0B
6ES7193-6BP00-0DA0
6ES7193-6BP00-0BA0
6ES7193-6BP20-0DA0
6ES7193-6BP20-0BA0
Usable type A1 BaseUnits

(temperature detection)
6ES7193-6BP00-0DA1

group (max. 10 A)
BU15-P16+A0+2B/T
6ES7193-6BP00-0BA1

group
9/26
Labeling strips
roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover

10 internally jumpered AUX
terminals (1 A to 10 A);
BU15-P16+A0+2D/T
6ES7193-6LF30-0AW0

terminals (1 A to 10 A); for starting
a new load group (max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP00-0BD0
BU type D0; BaseUnit

with 12 push-in terminals, without
AUX terminals, bridged to the left
Accessories

group
BU15-P16+A10+2D
6ES7193-6BP40-0BA1

2x5 internally jumpered additional
terminals (1 B to 5 B and 1 C to
5 C); for continuing the load group
Usable type D0 BaseUnits

group (max. 10 A)
BU15-P16+A0+2B
6ES7193-6BP40-0DA1

5 C); for starting a new load group
(max. 10 A)
BU15-P16+A0+12B/T

BU15-P16+A0+2D
Article No.

5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0
5 shield supports and

5 shield terminals
Color-coded labels
Color code CC03,
module-specific,
Color code CC71,
Color code CC72,
for BU type A0, red,
Color code CC73,
for BU type A0, blue,
Color code CC74,
for 2x5 additional terminals,
5 x red, 5 x blue, for BU type A1,
6ES7193-6CP03-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP74-2AA0
Siemens AG 2014

ET 200SP
I/O modules
Overview
2- and 4-channel analog output modules for the ET 200SP
Can be plugged into Type A0 or A1 BaseUnits (BU) with
automatic coding
- Color coding of the module type AQ: dark blue
- Labeling strips
General information
Product function
I&M data
6ES7135-6HD00-0BA1
AQ 4xU/I ST
6ES7135-6HB00-0DA1
AQ 2xU/I HS
6ES7135-6HB00-0CA1
AQ 2xU/I HF
Yes
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
V12 SP1 / V13
V13 / V13
V5.5 SP3 / -
V5.5 SP3 / -
GSD Revision 5
GSD Revision 5
GSDML V2.3
GSDML V2.3
Engineering with
STEP 7 can be configured/integrated V5.5 SP3 / as of version
GSD Revision 5
revision
V2.3 / revision
Operating mode
Oversampling
- Values per cycle max.
- Resolution min.
Yes
16
250 s
Yes
Yes
Yes
Yes
Yes
Supply voltage
DC
DC
DC
Rated value (DC)
24 V
24 V
24 V
Yes
Analog outputs
Number of analog outputs
5 ms
125 s
750 s
Output ranges, voltage

0 to 10 V
1 to 5 V
-5 to +5 V
-10 to +10 V
Yes; 15 bit
Yes; 13 bit
Yes; 15 bit
Yes; 13 bit
Yes; 15 bit
Yes; 13 bit
Output ranges, current

0 to 20 mA
-20 to +20 mA
4 to 20 mA
Yes; 15 bit
Yes; 14 bit
Yes; 15 bit
Yes; 14 bit
Yes; 15 bit
Yes; 14 bit
9/27
Siemens AG 2014

ET 200SP
I/O modules

6ES7135-6HD00-0BA1
AQ 4xU/I ST
6ES7135-6HB00-0DA1
AQ 2xU/I HS
6ES7135-6HB00-0CA1
AQ 2xU/I HF
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2 k
1 F
2 k
1 F
2 k
1 F
500
1 mH
500
1 mH
500
1 mH
Cable length
1 000 m
200 m
1 000 m

Settling time
for resistive load
for capacitive load
for inductive load
0.1 ms
1 ms
0.5 ms
0.05 ms
0.05 ms
0.05 ms
0.05 ms
0.05 ms
0.05 ms
Errors/accuracies
Basic error limit
Voltage, relative to output area, (+/-)
Current, relative to output area, (+/-)
0.3 %
0.3 %
0.1 %
0.1 %
0.1 %
0.1 %
Yes
Yes
Execution and activation time (TCO),

min.
130 s
500 s
250 s
750 s
Connection of actuators
for voltage output 2-conductor
connection
for voltage output 4-conductor
connection
for current output 2-conductor
connection
Load impedance (in rated range of
output)
with voltage outputs, min.
with voltage outputs, capacitive load,
max.
with current outputs, max.
with current outputs, inductive load,
max.
Isochronous mode
status information
Yes
Yes
Yes
Alarms
Diagnostic alarm
Yes
Yes
Yes
Diagnostic messages
Diagnostics
Wire break
Yes
Yes
Yes
Short circuit
Yes
Overflow/underflow
Yes
Yes
Yes
Yes; channel-by-channel, only for
output type "current"
output type "voltage"
Yes
Yes
Yes
output type "current"
output type "voltage"
Yes
Yes; Green/red LED
Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes; green PWR LED

Yes; Green LED
Yes; Red LED
Yes
Yes
Yes

Galvanic isolation
backplane bus
Isolation
9/28
Yes; Green LED

Yes; Green LED
Siemens AG 2014

ET 200SP
I/O modules

6ES7135-6HD00-0BA1
AQ 4xU/I ST
6ES7135-6HB00-0DA1
AQ 2xU/I HS
Ambient conditions
0 C
60 C
0 C
50 C
0 C
60 C
0 C
50 C
Dimensions
Width
15 mm
15 mm
15 mm
Weights
Weight, approx.
31 g
31 g
31 g
Ordering data
Article No.
Article No.
BU15-P16+A0+12D/T

AQ 4xU/I Standard,
BU type A0 or A1,
6ES7135-6HD00-0BA1

AQ 2xU/I High Speed,
BU type A0 or A1,
6ES7135-6HB00-0DA1

AQ 2xU/I High Feature,
BU type A0 or A1,
6ES7135-6HB00-0CA1

5 C); for continuing the load group
6ES7193-6BP00-0DA0
Accessories
BU15-P16+A0+2D
group (max. 10 A)
BU15-P16+A0+2B
6ES7193-6LF30-0AW0
6ES7193-6BP20-0DA0
6ES7193-6BP20-0BA0

roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover


5 units
15 mm
20 mm
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

(temperature detection)

terminals
BU15-P16+A0+2D/T
6ES7193-6BP00-0DA1

group (max. 10 A)
BU15-P16+A0+2B/T
group
Labeling strips
6ES7193-6BP00-0BA0

(max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP40-0BA1

group
BU15-P16+A10+2D
6ES7193-6BP40-0DA1

5 C); for starting a new load group
(max. 10 A)
BU15-P16+A0+12B/T
6ES7135-6HB00-0CA1
AQ 2xU/I HF
6ES7193-6BP00-0BA1
Color-coded labels
terminals, for BU type A0, with
Color code CC74, for 2x5
additional terminals, for BU type
A1, with push-in terminals;
10 units
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP74-2AA0
9/29
Siemens AG 2014

ET 200SP
Communication
Overview
Design
The CM AS-i Master ST module features a 20 mm wide
ET 200SP module housing. A C0 type BaseUnit (BU) is required
for use in the ET 200SP.
The module has LED indicators for diagnostics, operation,
AS-i voltage and AS-i slave status and offers informative
front-side module inscription for
Plain-text marking of the module type and function class
2D matrix code (Article No. and serial number)
Connection diagram
Color coding of the CM module type: Light gray
Hardware and firmware version
Complete Article No.
Function
The CM AS-i Master ST communication module is designed for

use in the SIMATIC ET 200SP distributed I/O system and has the
following features:
Connection of up to 62 AS-Interface slaves
Support for all AS-Interface master functions according to
AS-Interface Specification V3.0
User-friendly configuration with graphic display of the AS-i line
in TIA Portal V12.0 or in other systems using GSD
Supply via AS-Interface cable
Suitable for AS-i Power24V and for AS-Interface
with 30 V voltage
Integrated ground-fault monitoring for the AS-Interface cable
Through connection to AS-Interface and in combination
with ET 200SP, the number of digital inputs and outputs
available for the control system is greatly increased
(max. 496 DI/496 DO on the AS-Interface per
CM AS-i Master ST).
Integrated analog value processing (all analog profiles)
Basic unit: ET 200SP Distributed I/O System
SIMATIC ET 200SP is a scalable and highly flexible distributed
I/O system for connecting the process signals to a central
control system via PROFIBUS or PROFINET.
Up to eight CM AS-i Master STs can be plugged into a
SIMATIC ET 200SP with the IM 155-6 PN standard interface
module.
For further information,
see the "SIMATIC ET 200SP Distributed I/O" system manual
http://support.automation.siemens.com/WW/view/en/58649293.
9/30
The CM AS-i Master ST supports all specified functions of

AS-Interface Specification V3.0.
The input/output values of the digital AS-i slaves can be
activated via the cyclic process image. The values of the analog
AS-i slaves can be attained via data record transfer.
If required, master calls can be performed with the command
interface, e.g. read/write parameters, read/write configuration.
Changeover of the operating mode, automatic application of the
slave configuration and re-addressing of a connected AS-i slave
can be implemented via the control panel of the CM AS-i Master
ST in the TIA Portal.
Safety note
The use of this product requires suitable protective measures
(including network segmentation for IT security) to ensure safe
plant operation; see http://www.siemens.com/industrialsecurity.
Configuration
The following software is required for configuration of the
CM AS-i Master ST module:
STEP 7 (classic), V5.5 SP3 HF4 or higher with HSP 2092 or
STEP 7 (TIA Portal), V12 or higher or
the GSD file of the ET 200SP with STEP 7 or another
engineering tool
The TIA Portal enables user-friendly configuration and
diagnostics of the AS-i master and, in the event of interfacing to
a SIMATIC S7-300/S7-400 station, any connected slaves.
Alternatively, you can also apply the AS-Interface ACTUAL
configuration as the DESIRED configuration at the "touch of a
button" via the control panel integrated in the TIA Portal or
connection of an optional button. Configuration with the GSD file
is possible only with the button.
Siemens AG 2014

ET 200SP
Communication
Overview (continued)
The CM AS-i Master ST module occupies 32 input bytes and
32 output bytes in the I/O data of the ET 200SP station.
Configuration of an AS-Interface network with CM AS-i Master ST via

TIA Portal
Benefits
The CM AS-i Master ST for ET 200SP communication module
enables modular, simple and high-performance expansion of
AS-Interface networks via engineering in the TIA Portal.
Up to eight CM AS-i Master ST units can be plugged into one
ET 200SP station with IM 155-6 PN Standard. The maximum
configuration depends on the interface module used.
Multiple masters as well as single masters can thus be implemented in the ET 200SP depending on the number of modules.
Together with the interface module, a scalable
PROFINET/AS-i Link or PROFIBUS/AS-i Link can be assembled.
Application
Configuration examples of AS-Interface networks with CM AS-i Master ST for SIMATIC ET 200SP
Controller
e. g. S7-1500
PROFINET
PROFIBUS
SIMATIC ET 200SP
with 2 x CM AS-i masters ST
Pushbuttons
and indicator
lights
Field
module
AS-Interface
3RA6
compact
starter
M200D
motor starter
Signal
columns
AS-Interface
Pushbuttons Field
and indicator module
lights
3RA6
compact
starter
M200D
motor starter
Signal
columns
IC01_00237a
AS-Interface
SIMATIC ET 200SP
with CM AS-i master ST
Configuration of AS-Interface networks under a SIMATIC ET 200SP
9/31
Siemens AG 2014

ET 200SP
Communication
Ordering data
CM AS-i Master ST
Article No.
3RK7137-6SA00-0BC1
See
http://support.automation.siemens.com/WW/view/en/59753521
for the "SIMATIC ET 200SP BaseUnits" manual.
Corresponds to AS-Interface
Specification V3.0
Dimensions (W x H x D / mm):
20 x 73 x 58
Accessories
6ES7193-6BP20-0DC0
BaseUnit (light), BU type C0
See
for the "SIMATIC ET 200SP Distributed I/O System" system
manual.
Suitable for the

CM AS-i Master ST module
Industry Mall
For connection of the AS-Interface

cable to CM AS-i Master ST
For further information, see

"Automation" "Industrial communication"
"AS-Interface" "Master" "Master for SIMATIC ET 200".
For starting an AS-i network,

isolation of the AS-i voltage to
the left-hand module
IM 155-6 PN Standard
PROFINET interface module
Max. 32 I/O modules,
max. 256 bytes I/O data per station
Including server module and
bus adapter 2 x RJ45
(supplied without RJ45 plug)
6ES7155-6AA00-0BN0
Including server module

(bus adapter to be ordered
separately, see below)
6ES7155-6AU00-0BN0
IM 155-6 PN High Feature

PROFINET interface module
Manuals
See
for the "CM AS-i Master ST for SIMATIC ET 200SP" manual.
AS-Interface master for

SIMATIC ET 200SP, for plugging
onto BaseUnit Type C0
BaseUnit BU20-P6+A2+4D
More information

max. 1 440 bytes I/O data per
station
Including server module
(bus adapter to be ordered
separately, see below)
6ES7155-6AU00-0CN0
IM 155-6 DP High Feature

PROFIBUS interface module
max. 244 bytes I/O data per station
Including server module and
PROFIBUS connector
6ES7155-6BA00-0CN0
Bus adapter for PROFINET

For connecting the Ethernet cable
to the IM 155-6 PN PROFINET
interface module
2 x RJ45 connection
(supplied without RJ45 plug)
6ES7193-6AR00-0AA0
Connection 2 x FC (FastConnect)
6ES7193-6AF00-0AA0
9/32
Siemens AG 2014

ET 200SP
Technology modules
Overview
6ES7138-6AA00-0BA0
TM Count 1x24V
Technical properties
ET 200SP counter module
Interfaces:
- 24 V encoder signals A, B and N from P, M or
push-pull-switching encoders and sensors
- 24 V encoder supply output, short-circuit-proof
- 3 digital inputs for controlling the count operation, for saving
or for setting the count value
- 2 digital outputs for fast responses regardless of the counter
status or the measured value
Counting frequency 200 kHz
(800 kHz with quadruple evaluation)
Counting range + 31 bit
Measurement function
Process interrupts, parameterizable
Parameterizable input filter for suppressing faults at encoder
and digital inputs
Supported encoders/signal types
24 V incremental encoder with and without signal N
24 V pulse encoder with direction signal
24 V pulse encoder without direction signal
24 V pulse encoder for pulse up and down respectively
Supported system functions
Isochronous mode
Firmware update
Identification data I&M
Engineering with
STEP 7 can be
Yes
Yes
Digital input functions,

parameterizable
Gate start/stop
Capture
Synchronization
Yes
Yes
Yes
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
24 V
-30 to +5 V
+11 to +30 V
-30 V
30 V
Input current
2.5 mA
Input delay
for standard inputs
- Parameterizable
Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 /

3.2 / 12.8 / 20 ms
Yes
Cable length
1 000 m
600 m
Digital outputs
Transistor
Yes
Yes; I&M0 to I&M3
1A
V13 / V13

voltage to
L+ (-33 V)
V5.5 SP3 / V5.5 SP4
Yes
Digital output functions,

parameterizable
values
Yes
6ES7138-6AA00-0BA0
TM Count 1x24V
Product function
I&M data
1W
Digital inputs
- at "0" to "1", min.

- at "1" to "0", min.
- Parameterizable
General information
Usable BaseUnits
Power losses
Power loss, typ.
BU type A0
Supply voltage
Load voltage L+
Rated value (DC)
24 V
19.2 V
28.8 V
Yes
Input current
60 mA; without load
Encoder supply
Number of outputs
24 V encoder supply
24 V
Yes; L+ (-0.8 V)
Yes
300 mA
Yes

on lamp load, max.

5W

lower limit
upper limit
48
12 k
Output voltage
23.2 V; L+ (-0.8 V)
9/33
Siemens AG 2014

ET 200SP
Technology modules

6ES7138-6AA00-0BA0
TM Count 1x24V
Output current
max.
"0" to "1", max.
"1" to "0", max.
Switching frequency

2 mA
0.5 mA
50 s
50 s
on lamp load, max.
10 kHz
0.5 Hz; Acc. to IEC 947-5-1, DC-13;
10 Hz

1A
Cable length
Encoder
2-wire sensor
- Permissible quiescent current
(2-wire sensor), max.
1 000 m
600 m
Yes
1.5 mA

(asymmetrical)
Input voltage
24 V
200 kHz
800 kHz; with quadruple evaluation
Yes
600 m; depending on input
frequency, encoder and cable
quality; max. 50 m at 200 kHz
Incremental encoder with A/B tracks, Yes
90 out of phase
Incremental encoder with A/B tracks, Yes
Pulse encoder
Yes
Yes
Yes
Encoder signal 24 V
- Permissible voltage at input, min. -30 V
- Permissible voltage at input, max. 30 V
Interface types
m/p-reading
Isochronous mode
Yes
Yes
Yes
Diagnostic messages
Wire break
Short circuit
encoder
Group error
Status indicator backward counting
(green)
Status indicator forward counting
(green)
Yes; Parameterizable
Alarms
Diagnostic alarm
Hardware interrupt
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes; green PWR LED
Yes
Yes
Number of counters
800 kHz; with quadruple evaluation
Counting functions
Can be used with TO
High_Speed_Counter
Continuous counting
Counter response can be parameterized
Software gate
Comparator
program
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
Yes
Yes
Position detection
Yes
Measuring functions
Number of thresholds,
parameterizable
Measuring range
Accuracy
- Speed measurement
status information
9/34
6ES7138-6AA00-0BA0
TM Count 1x24V
Yes
Yes
2
0.04 Hz
800 kHz
1.25 s
25 s
Siemens AG 2014

ET 200SP
Technology modules

6ES7138-6AA00-0BA0
TM Count 1x24V
Galvanic isolation
backplane bus
Yes
Ordering data
With one channel, max. 200 kHz;
for 24 V encoder
BU15-P16+A0+2D
Isolation

group (max. 10 A)
BU15-P16+A0+2B
15 mm
Weights
Weight, approx.
45 g
6ES7138-6AA00-0BA0
Usable BaseUnits

Dimensions
Width
Article No.
6ES7193-6BP00-0DA0
6ES7193-6BP00-0BA0

group
BU15-P16+A10+2D
6ES7193-6BP20-0DA0

terminals (1 A to 10 A); for starting
a new load group (max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP20-0BA0

terminals (1 A to 10 A); for
continuing the load group
Accessories
6ES7193-6LF30-0AW0
Labeling strips
roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover
5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
Color-coded labels
Color code CC71,
Color code CC72,
terminals; 10 units
Color code CC73,
terminals; 10 units
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
9/35
Siemens AG 2014

ET 200SP
Technology modules TM PosInput 1 counter and
position recording module
Overview
6ES7138-6BA00-0BA0
TM PosInput 1
General information
Usable BaseUnits
BU type A0
Product function
I&M data
Yes; I&M0 to I&M3
Engineering with
STEP 7 can be
Technical properties
Counter and position recording module for ET 200SP
Interfaces:
- Encoder signals A, B and N for 5 V TTL or RS422 differential
signals
- SSI interface with clock and data for RS422 differential
signals
- 24 V encoder supply output, short-circuit proof
- 2 digital inputs for controlling the counting process, for
saving or setting the counter or position value
- 2 digital outputs for fast reactions depending on the counter
reading, position value or measured value
Counter frequency 1 MHz (4 MHz with four-fold evaluation)
Count range: +/- 31 bits
Measurement function
Parameterizable hardware interrupts
Parameterizable input filters for suppressing interferences
at sensor and digital inputs
Supported types of encoders/signals
Incremental encoders with or without N signal
Pulse encoders with directional signal
Pulse encoders without directional signal
Pulse encoders for forward or reverse pulses
SSI encoders with a frame length of 10 to 40 bits,
of which up to 31 bits position value
Supported system functions
Isochronous mode
Firmware update
Identification data (I&M)
V5.5 SP3 / V5.5 SP4
Supply voltage
Load voltage L+
Rated value (DC)
24 V
19.2 V
28.8 V
Yes
Input current
75 mA; without load
Encoder supply
Number of outputs
24 V encoder supply
24 V
Yes; L+ (-0.8 V)
Yes
300 mA
Power losses
Power loss, typ.
1.9 W
Digital inputs
Yes

accordance with IEC 61131, type 3
Yes
Digital input functions,

parameterizable
Gate start/stop

encoders
Yes
encoders
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
24 V
-30 to +5 V
+11 to +30 V
-30 V
30 V
Input current
2.5 mA
Capture
Synchronization
Input delay
for standard inputs
- Parameterizable
- at "0" to "1", min.
- at "1" to "0", min.
- Parameterizable
9/36
V13 / V13
Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 /

3.2 / 12.8 / 20 ms
Yes
Siemens AG 2014

ET 200SP

6ES7138-6BA00-0BA0
TM PosInput 1
Cable length
1 000 m
600 m
Digital outputs
Transistor
Yes
1A

voltage to
L+ (-33 V)
Yes
Digital output functions, parameterizable

values
Yes
Yes

on lamp load, max.

5W

lower limit
upper limit
48
12 k
Output voltage
23.2 V; L+ (-0.8 V)
Output current
max.
"0" to "1", max.
"1" to "0", max.
Switching frequency
on lamp load, max.


(asymmetrical)
Input voltage
90 out of phase
Pulse encoder
Encoder signals, absolute encoder
(SSI)
Input signal
Message frame length,
parameterizable
Clock frequency, max.
2 mA
0.5 mA
50 s
50 s
Interface types
RS422
TTL 5 V
10 kHz
0.5 Hz; Acc. to IEC 947-5-1, DC-13;
10 Hz
1A
Cable length
1 000 m
600 m
RS 422
1 MHz
Yes
32 m; at 1 MHz
Yes
Yes
Yes
Yes
Yes
5 V TTL (push-pull encoders only)

1 MHz
Yes
Yes
Yes
Yes
Yes
Yes
to RS-422
10 ... 40 bit
2 MHz; 125 kHz, 250 kHz, 500 kHz,
1 MHz, 1.5 MHz or 2 MHz
Yes
Yes
320 m; Cable length, RS-422 SSI
absolute encoders, Siemens type
6FX2001-5, 24 V supply: 125 kHz,
20 meters shielded, max. 1.5 MHz,
8 meters shielded, max.
Yes
16, 32, 48, 64 s & automatic
Yes
Yes
Binary code
Gray code

Encoder
(symmetrical)
Input voltage
90 out of phase
Pulse encoder
6ES7138-6BA00-0BA0
TM PosInput 1
Parity bit, parameterizable

Monoflop time
Multiturn
Singleturn
Yes
Yes
Isochronous mode
Yes
status information
Alarms
Diagnostic alarm
Hardware interrupt
Yes
Yes
Diagnostic messages
Wire break
Short circuit
encoder
Frame error at SSI encoder
Group error
Yes
Yes
Yes
Yes
Yes
Yes

Status indicator backward counting
(green)
Status indicator forward counting
(green)
Yes; green PWR LED

Yes
Yes
9/37
Siemens AG 2014

ET 200SP
TM PosInput 1 counter and

positioning recording module
Number of counters
With one channel, max. 1 MHz for

5 V TTL or RS422 differential signals
or SSI absolute encoder
Counting functions
Can be used with TO
High_Speed_Counter
Continuous counting
Counter response can be parameterized
Software gate
Comparator
program
Measuring functions
Number of thresholds, parameterizable
Measuring range
Accuracy
- Speed measurement
Galvanic isolation
backplane bus
BU15-P16+A0+2D
Yes
Yes
Yes
Yes
Yes
BU15-P16+A0+2B
2
Yes
Yes
BU type A0; BaseUnit (light) with

16 process terminals (1...16) to the
module and an additional 10 internally jumpered AUX terminals
group (max. 10 A)
Yes
Yes
2
6ES7138-6BA00-0BA0

Yes
6ES7193-6BP00-0DA0

16 process terminals to the module;
(max. 10 A)
6ES7193-6BP00-0BA0
BU type A0; BaseUnit (dark) with

BU15-P16+A10+2D
BU15-P16+A10+2B
6ES7193-6BP20-0DA0
6ES7193-6BP20-0BA0

group
Accessories
0.04 Hz
4 MHz
0.25 s
25 s
6ES7193-6LF30-0AW0
Labeling strips
roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover

Isolation
Ambient conditions
0 C
60 C; Observe derating
0 C
50 C; Observe derating
Dimensions
Width
15 mm
Weights
Weight, approx.
45 g
9/38
Article No.
Usable BaseUnits
encoders
Yes
Yes
Position detection
Yes
Yes
Absolute acquisition
Ordering data
6ES7138-6BA00-0BA0
TM PosInput 1

5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
Color-coded labels
Color code CC71,
Color code CC72,
terminals; 10 units
Color code CC73,
terminals; 10 units
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
Siemens AG 2014

ET 200SP
Overview
6ES7136-6BA00-0CA0
F-DI 8x24VDC HF
Digital fail-safe input module:

F-DI 8x24 V DC High Feature for BU type A0, color code CC01
Other properties:
8-channel digital fail-safe input module for the ET 200SP
For fail-safe reading of sensor information (1 or 2 channels)
Provides integral discrepancy evaluation for 2-out-of-2 signals
8 internal sensor supplies (incl. test function) onboard
Certified up to SIL 3 (IEC 61508), PL e (ISO 13849)
Can be plugged into type A0 BaseUnits (BU) with automatic
coding
- Complete article No.
- Labeling strips
The modules support PROFIsafe, both in PROFIBUS, and in
PROFINET configurations. They can be used with all fail-safe
SIMATIC S7 CPUs.
General information
Product function
I&M data
Engineering with
STEP 7 can be
revision
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
DC
24 V
-30 to +5 V
+15 V to +30 V
Input current
3.7 mA

voltage)
for standard inputs
- Parameterizable
- Parameterizable
Yes
No
Cable length
1 000 m
500 m
status information
Alarms
Diagnostic alarm
Hardware interrupt
Yes
No

RUN LED
ERROR LED
Yes; Green LED

Yes; Red LED
Yes; green PWR LED
Yes; Green LED
Yes; Red LED
Yes; I&M0 to I&M3
Isolation
V12

Suitable for safety functions
Yes
V5.5 SP3 / V2.31
Rated value (DC)
24 V
Yes
Encoder supply
Number of outputs
24 V encoder supply
24 V
Yes; p-reading
Galvanic isolation
backplane bus
24 V DC
Output current
up to 60 C, max.
m/p-reading
6ES7136-6BA00-0CA0
F-DI 8x24VDC HF
Supply voltage
Digital inputs
Yes
Highest safety class achievable in

safety mode
Performance level according to EN
ISO 13849-1:2008
SIL according to IEC 61508:2010
Low demand (PFD) acc. to SIL3
High demand (PFH) acc. to SIL3
PLe
SIL 3
< 2.00E-05 1/h
< 1.00E-09 1/h
Yes; Electronic (response threshold

0.7 A to 1.8 A)
Ambient conditions
0 C
60 C
0 C
50 C
0.3 A
Dimensions
Width
15 mm
Weights
Weight, approx.
49 g
Yes; min. L+ (-1.5 V)

Yes
800 mA
9/39
Siemens AG 2014

ET 200SP
Ordering data
Article No.

F-DI 8x24 V DC High Feature,
6ES7136-6BA00-0CA0
6ES7193-6BP00-0DA0

(max. 10 A)
BU15-P16+A0+2B
6ES7193-6BP00-0BA0

BU15-P16+A10+2D
6ES7193-6BP20-0DA0

group (max. 10 A)
BU15-P16+A10+2B

roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover
6ES7193-6BP20-0BA0

group

5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
Accessories
S7 Distributed Safety
programming tool V5.4
6ES7193-6LF30-0AW0
Labeling strips
Usable BaseUnits
BU15-P16+A0+2D
Article No.
Task: Configuration software for

configuring fail-safe user programs
for SIMATIC S7-300F, S7-400 F,
Requirement: STEP 7 V5.3 SP3 and
higher
Floating license for 1 user
6ES7833-1FC02-0YA5
Floating license for 1 user, license

documentation1);
6ES7833-1FC02-0YH5
Color-coding plates
Color code CC01,
terminals; for BaseUnit type A0,
A1; 10 units
Color code CC71,
Color code CC72,
terminals; 10 units
Color code CC73,
terminals; 10 units
6ES7193-6CP01-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0

Task:
ET 200S, ET 200M, ET 200iSP,
Requirement:
6ES7833-1FA13-0YA5

documentation1);
6ES7833-1FA13-0YH5
1)
9/40

Siemens AG 2014

ET 200SP
Overview
6ES7136-6DB00-0CA0
F-DQ 4x24VDC HF
Digital fail-safe output module:

F-DQ 4x24 V DC High Feature, BU type A0, color code CC01
Other properties:
4-channel digital fail-safe output module for the ET 200SP
Fail-safe 2-channel activation (sink/source output) by
actuators
Actuators can be controlled up to 2 A
Can be plugged into type A0 BaseUnits (BU) with automatic
coding
- Labeling strips
The modules support PROFIsafe, both in PROFIBUS, and in
PROFINET configurations.
They can be used with all fail-safe SIMATIC S7 CPUs.
6ES7136-6DB00-0CA0
F-DQ 4x24VDC HF
General information
Product function
I&M data
Engineering with
STEP 7 can be
revision
Yes; I&M0 to I&M3

V12
V5.5 SP3 / V2.31
Supply voltage
24 V DC
Rated value (DC)
24 V
Yes
Digital outputs
Yes
Yes
Yes
Overload protection
Yes

voltage to
typ. 2*47V

on lamp load, max.
2A
10 W

lower limit
upper limit
12
2 000
Output voltage
DC
24 V; L+ (-0.5 V)
Output current
2A
0.5 mA
Switching frequency
on lamp load, max.
30 Hz; Symmetrical
0.1 Hz; according to IEC 947-5-1,
DC-13, symmetrical
10 Hz; Symmetrical

2 A; Note derating data in the manual

Cable length
1 000 m
500 m
status information
No
Alarms
Diagnostic alarm
Yes

RUN LED
ERROR LED
Yes; Green LED

Yes; Red LED
Yes; green PWR LED
Yes; Green LED
Yes; Red LED
Galvanic isolation
backplane bus
Yes
Isolation

Yes

safety mode
Performance level according
to EN ISO 13849-1:2008
PLe
SIL 3
< 2.00E-05 1/h
< 1.00E-09 1/h
Ambient conditions
0 C
60 C
0 C
50 C
Dimensions
Width
15 mm
Weights
Weight, approx.
57 g
9/41
Siemens AG 2014

ET 200SP
Ordering data
Article No.

F-DQ 4x24 V DC High Feature,
6ES7136-6DB00-0CA0
6ES7193-6BP00-0DA0

(max. 10 A)
BU15-P16+A0+2B
6ES7193-6BP00-0BA0

BU15-P16+A10+2D
6ES7193-6BP20-0DA0

group (max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP20-0BA0
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0

5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
6ES7193-6BP20-0BB0
BU type B0; BaseUnit (dark) with

group

roll printer
BU cover

group
BU20-P12+A4+0B
6ES7193-6LF30-0AW0
Labeling strips
Usable BaseUnits
BU15-P16+A0+2D
Article No.
Color-coding plates
Color code CC02,
A1; 10 units
Color code CC71,
Color code CC72,
terminals; 10 units
Color code CC73,
terminals; 10 units
Accessories
Task:Configuration software for
for SIMATIC S7-300F, S7-400F,
higher
6ES7833-1FC02-0YA5

documentation1);
6ES7833-1FC02-0YH5
6ES7193-6CP02-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0

Task:
S7-400F, WinAC RTX F, ET 200SP,
ET 200S, ET 200M, ET 200iSP,
Requirement:
6ES7833-1FA13-0YA5

documentation1);
6ES7833-1FA13-0YH5
1)
9/42

Siemens AG 2014

ET 200SP
Overview
6ES7136-6RA00-0BF0
The digital F electronic module relay 1 F-RQ 24 V DC/

24...230 V AC/5 A has the following characteristics:
1 relay output (2 NO contacts)
Total output current 5 A
Rated load voltage 24 V DC and 24...230 V AC
The control circuit of the two safety relays must be routed from
the outside to the respective terminals.
The attainable safety integrity level is SIL3 (IEC61508) when the
control of the F-RQ module is implemented via a fail-safe output
(e.g. ET 200SP 4F-DQ 24 V DC/2 A PROFIsafe).
6ES7136-6RA00-0BF0
F-RQ 1x24VDC/24 ... 230VAC/5A
General information
Product function
I&M data
Yes; I&M0 to I&M3
Supply voltage
24 V DC
Rated value (DC)
24 V
Digital outputs
Yes

on lamp load, max.
5A
25 W
Total current of the outputs

(per module)
- up to 40 C, max.
- up to 50 C, max.
- up to 60 C, max.
- up to 50 C, max.
Switching frequency
F-RQ 1x24VDC/24 ... 230VAC/5A

Relay outputs
Rated input voltage of relay coil L+
(DC)
Current consumption of relays
(coil current of all relays), max.
Relay approved acc. to UL 508
Switching capacity of contacts
- with inductive load, max.
2 Hz
0.1 Hz
5A
4A
3A
3A
1
24 V
70 mA
Yes
see additional description in the

manual
see additional description in the
manual
Thermal continuous current, max. 5 A
24 V
rated switching voltage (DC)
rated switching voltage (AC)
230 V
Cable length
Control cable (input), max.
500 m
300 m
10 m
status information
RUN LED
Yes
Yes; Green LED
Galvanic isolation
backplane bus
Yes
Isolation
Overvoltage category
III

Yes

safety mode
Performance level according to
EN ISO 13849-1:2008
Category according to
ISO 13849-1:2008
PLe
4
SIL 3
Dimensions
Width
20 mm
Weights
Weight, approx.
56 g
9/43
Siemens AG 2014

ET 200SP
Ordering data
Article No.
Digital F output module

relay 1 F-RQ
BU type F0, relay output
(2 NO contacts), total output current
5 A, load voltages 24 V DC and
24...230 V AC; can be used up to
SIL3 / Category 4/ PLe if controlled
via F-DQ
Article No.
6ES7193-6LF30-0AW0
6ES7136-6RA00-0BF0
Usable BaseUnits
Labeling strips
500 labeling strips on roll, light gray
6ES7193-6LR10-0AA0
500 labeling strips on roll, yellow
6ES7193-6LR10-0AG0

gray
6ES7193-6LA10-0AA0
1000 labeling strips DIN A4, yellow
6ES7193-6LA10-0AG0
BU type F0; BaseUnit (dark) with

8 process terminals to the module
and an additional 4 internally
jumpered AUX terminals (1 A to
4 A); for continuing the load group
BU cover
6ES7133-6CV15-1AM0
Accessories
Shield connection

terminals
BU20-P8+A4+0B
6ES7193-6BP20-0BF0

5 units
20 mm wide
6ES7193-6SC00-1AM0
Task: Configuration software for

for SIMATIC S7-300F, S7-400F,
higher
6ES7833-1FC02-0YA5

documentation1);
6ES7833-1FC02-0YH5
Task:
S7-400F, WinAC RTX F, ET 200SP,
ET 200S, ET 200M, ET 200iSP,
Requirement:
6ES7833-1FA13-0YA5

documentation1);
6ES7833-1FA13-0YH5
1)
9/44

Siemens AG 2014

ET 200SP
Overview
Digital fail-safe power module:

F-PM-E PPM 24 V DC/8 A for BU type C0, color code CC52
Other properties:
Safety-related shutdown of output modules within the potential
group of the F-PM-E
Two fail-safe digital inputs, for reading of sensor information
(1 or 2 channels)
One fail-safe digital output onboard (ppm switching, up to 2 A,
up to SIL 3/PL e)
Fail-safe digital output and potential supply pp or pm
switching can be parameterized
Parameterizable onboard evaluation of the fail-safe inputs for
control of the fail-safe digital outputs and of the potential group
Digital standard output modules can be shut down up to PL d
(ISO 13849) and SIL 2 (IEC61508) (up to 8 A).
Can be plugged into type C0 BaseUnits (BU) with automatic
coding
- Labeling strips
The modules support PROFIsafe in both PROFIBUS and
PROFINET configurations. They can be used with all fail-safe
SIMATIC S7 CPUs.
6ES7136-6PA00-0BC0
F-PM-E PPM 24VDC
General information
Product function
I&M data
Engineering with
STEP 7 can be
revision
revision
Yes; I&M0 to I&M3

V12
V5.5 SP3 / V2.3
V2.31
Supply voltage
24 V DC
Rated value (DC)
24 V
Yes
Input voltage
DC
Output voltage
DC
Encoder supply
Number of outputs
Yes; Electronic
(response threshold 0.7 A to 2.1 A)
Output current
up to 60 C, max.
0.3 A
24 V encoder supply
24 V
Yes; min. L+ (-1.5 V)

Yes
600 mA
Digital inputs
m/p-reading
Yes; p-reading
Yes
Input voltage
Rated value, DC
for signal "0"
for signal "1"
DC
24 V
-30 to +5 V
+15 V to +30 V
Input current
3.7 mA

voltage)
for standard inputs
- Parameterizable
- Parameterizable
Cable length
Yes
No
1 000 m
500 m
9/45
Siemens AG 2014

ET 200SP

6ES7136-6PA00-0BC0
F-PM-E PPM 24VDC
Digital outputs
Yes
Yes
Yes
Overload protection
Yes

voltage to
max. 1.5 V

on lamp load, max.
8A
100 W

lower limit
upper limit
3
2 000
Output voltage
24 V; L+ (-0.5 V)
status information
No
Alarms
Diagnostic alarm
Hardware interrupt
Yes
No

RUN LED
ERROR LED
Yes; Green LED

Yes; Red LED
Yes; green PWR LED
Yes; Green LED
Yes; Red LED
Galvanic isolation
backplane bus
Yes
Isolation
8A
1.5 mA; PP-switching: max. 1.5 mA;
PM-switching: max. 1 mA

Yes
on lamp load, max.
10 Hz; Symmetrical
0.1 Hz; according to IEC 947-5-1,
DC-13, symmetrical
4 Hz; Symmetrical


safety mode
Performance level according to
EN ISO 13849-1:2008

Output current
Switching frequency
6ES7136-6PA00-0BC0
F-PM-E PPM 24VDC
Cable length
Ordering data
Digital F power module F-PM-E
24 V DC/8 A PPM Standard
1 000 m
500 m
20 mm
Height
72 mm
Depth
55 mm
Weights
Weight, approx.
70 g
Article No.
Accessories
BU type C0, color code CC52.

2 inputs, 1 output, SIL3/Cat.4/PLe
Type C0 BaseUnits
Labeling strips
BU20-P6+A2+4D
6ES7193-6BP20-0DC0
BU type C0; BaseUnit (light) with

6 push-in terminals (1...6) to the
module and an additional
2 AUX terminals; new load group
SIL 3
< 2.00E-05 1/h
< 1.00E-09 1/h
Dimensions
Width
Article No.
6ES7136-6PA00-0BC0
PLe

printer
6ES7193-6LF30-0AW0
6ES7193-6LA10-0AG0
BU cover
5 units
20 mm wide
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
Color-coding plates
10 units
9/46
6ES7193-6CP52-2MC0
Siemens AG 2014

ET 200SP
Overview
Informative front-side module inscription
- Plain-text marking of the module type and function class
- 2D matrix code (Article no. and serial number)
- Color coding of the CM module type: light gray
- Labeling strips
Design
The fail-safe F-CM AS-i Safety ST master has an ET 200SP
module enclosure with a width of 20 mm.
F-CM AS-i Safety ST for SIMATIC ET 200SP
The F-CM AS-i Safety ST fail-safe communication module

supplements an AS-Interface network without additional wiring
to produce a safety-related AS-i network.
Important features:
Fail-safe communication module for the ET 200SP
- 31 fail-safe input channels in the process image
- 16 fail-safe output channels in the process image
- Certified up to SIL 3 (IEC 62061/IEC 61508), PL e
(EN ISO 13849-1)
- Parameterization conforms with other fail-safe I/O modules
of the ET 200SP
The communication module supports PROFIsafe in
PROFINET configurations. Suitable for use with fail-safe
SIMATIC S7-300F/S7-416F CPUs.
For reading up to 31 fail-safe AS-i input slaves
- 2 sensor inputs/signals for each fail-safe AS-i input slave
- Adjustable evaluation of sensor signals: 2-channel or
2 x 1-channel
- Integrated discrepancy evaluation in the case of 2-channel
signals
- Integrated AND operation in the case of 2 x 1-channel
signals
- Input delay can be parameterized
- Start-up test can be set
- Sequence monitoring can be activated
For control of up to 16 fail-safe AS-i output circuit groups
- The output circuit groups are controlled independently of
one another.
- One output circuit group can act on one or more actuators
(e.g. to switch drives simultaneously).
- An actuator (e.g. a contactor) is interfaced via a fail-safe
AS-i output module (e.g. safe SlimLine module S45F,
Article No. 3RK1405-1SE15-0AA2).
- Simple fault acknowledgment via the process image
Simple module replacement thanks to automatic importing of
the safety parameters from the coding element
Comprehensive diagnostic options
Can be plugged onto type C1 or type C0 BaseUnits (BU)
Supply via AS-Interface voltage
8 LED indicators for diagnostics, operating state, fault
indication and supply voltage
One AS-i master according to the AS-i Specification V3.0 and

fail-safe AS-i input slaves and/or fail-safe AS-i output modules
are needed for operation. The CM AS-i Master ST communication module (Article No. 3RK7137-6SA00-0BC1) is recommended as the AS-i master for the ET 200SP.
SIMATIC AS-i F-Link
Simple combination of the CM AS-i Master ST and
F-CM AS-i Safety ST modules in one ET 200SP station with
PROFINET interfacing results in a powerful PN/AS-i F-Link,
which can be expanded further in a modular fashion.
SIMATIC AS-i F-Link: combination of an ET 200SP interface module,

CM AS-i Master ST and F-CM AS-i Safety ST
With the digital and analog I/O modules of the ET 200SP, local
inputs and outputs can be realized in the SIMATIC AS-i F-Link so
as to ensure that the F-Link complies precisely with customer
requirements. Expansion variants for almost every application
are possible thanks to the selection of standard and fail-safe
I/O modules.
Besides the single AS-i master, double, triple or generally
multiple masters can be realized with or without fail-safe
functionality.
Supported BaseUnits
With the recommended combination of the CM AS-i Master ST
and F-CM AS-i Safety ST modules, the CM module is plugged
onto a light type C0 BaseUnit and, directly on the right of it, the
F-CM module is plugged onto a dark type C1 BaseUnit. The
AS-i cable is connected only on the light BaseUnit of the
CM module.
If the F-CM AS-i Safety ST module is not combined with the
CM AS-i Master ST module, but another AS-i master is used
instead, then the F-CM module is plugged onto a light type C0
BaseUnit. In this case, the AS-i cable is connected on the light
BaseUnit of the F-CM module.
9/47
Siemens AG 2014

ET 200SP
Configuration and programming are done entirely in the
STEP 7 user interface. No additional configuration software is
needed for commissioning.
Safety note
The use of this product requires suitable protective measures
(including network segmentation for IT security) in order to
ensure safe plant operation; see
http://www.siemens.com/industrialsecurity.
Data management together with all other configuration data of

the SIMATIC is realized completely in the S7 project.
Configuration
The following software is required for configuration of the
F-CM AS-i Safety ST module:
STEP 7 (classic), V5.5 SP3 HF4 or higher with HSP 2093 and
Distributed Safety V5.4 SP5 or F-Configuration Pack SP11
The input and output channels are assigned to the process

image automatically and manual linking via configuration
function blocks is not necessary.
If the F-CM AS-i Safety ST module is replaced, all necessary
settings are automatically imported into the new module.
The F-CM AS-i Safety ST module occupies 16 input bytes and
8 output bytes in the I/O data of the ET 200SP station.
Application
Thanks to use of the fail-safe module in the ET 200SP, it is
possible to fulfill the safety-related application requirements in a
manner that is integrated in the overall automation solution.
ASIsafe slave modules are read via the AS-i bus line and are
combined with any chosen further signals in the fail-safe
program.
The safety functions required for fail-safe operation are

integrated in the modules. Communication with the fail-safe
SIMATIC S7 CPUs is realized via PROFIsafe.
The fail-safe output signals can be output through fail-safe

SIMATIC output modules or also directly via AS-i with the aid of
fail-safe AS-i output modules, e.g. 3RK1405-1SE15-0AA2 (see
Catalog IC 10, chapter 2 "Industrial Communication"). No special
functions are required for this in the program.
The safety application is programmed in the SIMATIC S7 F-CPU

with Distributed Safety. The fail-safe input signals of the
Configuration examples of AS-Interface networks with CM AS-i Master ST and F-CM AS-i Safety ST for SIMATIC ET 200SP
Operational
control
Safe control
SIMATIC S7-300F
PROFINET / PROFIsafe
SIMATIC
AS-i F-Link
SIMATIC
AS-i F-Link
AS-Interface / ASIsafe
IC01_00288
Safety-oriented
processing
1 Safe EMERGENCY-STOP
4 Load feeder with safe AS-i outputs
2 Safe position switch with door interlock
5 Digital K45 field module
3 Field module
6 3RA2 load feeder
AS-Interface configuration with SIMATIC AS-i F-Link, consisting of an ET 200SP station with CM AS-i Master ST and F-CM AS-i Safety ST modules
9/48
Siemens AG 2014

ET 200SP
Ordering data
F-CM AS-i Safety ST
Article No.
3RK7136-6SC00-0BC1
More information
Manuals
See
for the "F-CM AS-i Safety ST for SIMATIC ET 200SP" manual.
Failsafe module for

SIMATIC ET 200SP, can be
plugged onto type C1 BaseUnit
(alternatively, type C0)
See
for the "SIMATIC ET 200SP BaseUnits" manual.
Operation requires an AS-i master,

e.g. CM AS-i Master ST
(see p. 4/32)
See
for the "SIMATIC ET 200SP Distributed I/O System" system
manual.
Certified up to SIL 3
(IEC 62061/IEC 61508),
PL e (EN ISO 13849-1)
Released for use with the
PROFINET interface modules
IM 155-6 PN Standard and
IM 155-6 PN High Feature, under
CPU S7-300F or CPU S7-416F.
Additional releases on request.
Industry Mall
For further information, see
"Automation" "Industrial communication"
"AS-Interface" "Master" "Master for SIMATIC ET 200".
Coding element type F

(included in scope of delivery)
Dimensions (W H D / mm):
20 x 73 x 58
Accessories
BaseUnit BU20-P6+A2+4B
6ES7193-6BP20-0BC1
BaseUnit (dark), BU type C1

Suitable for the failsafe
F-CM AS-i Safety ST module
Continuation of an AS-i network,
connection with the AS-i voltage
of the left-hand module
Coding element type F
(spare part)
6ES7193-6EF00-1AA0
For the ET 200SP modules

F-CM AS-i Safety ST, F-DI, F-DQ,
F-PM-E
Packaging unit: 5 units

Additional accessories
see p. 9/32
9/49
Siemens AG 2014

ET 200SP
BaseUnits
Overview
With the BaseUnits, the ET 200SP offers a rugged and servicefriendly design with permanent wiring:
No tools needed for one-handed wiring using push-in

terminals
Outstanding access due to arrangement of measuring tap,
spring NC contacts and cable entry in columns, while at the
same time reducing the space required by 64%
Fault-proof color coding of the spring NC contacts for better
orientation in the terminal panel
Replacement of I/O modules during operation without
affecting the wiring
Operation with module gaps (missing I/O module)
Automatic coding of the I/O modules prevents destruction
of the electronics if a module is accidentally inserted in the
wrong slot during replacement
High immunity to electromagnetic interference due to
- self-assembling shielded backplane bus,
- multi-layer conductor plate with shield levels for interference-free signal transmission from the terminal to the
I/O module,
- system-integrated, space-saving shield connection for quick
installation.
6ES7193-6BP00-0BA0
BU15-P16+A0+2B
6ES7193-6BP00-0BA1
BU15-P16+A0+2B/T
Supply voltage
Rated value (AC)
6ES7193-6BP00-0BD0
BU20-P12+A0+0B
6ES7193-6BP00-0DA0
BU15-P16+A0+2D
6ES7193-6BP00-0DA1
BU15-P16+A0+2D/T
400 V; 230 V AC (L1, N)
Dimensions
Width
15 mm
15 mm
20 mm
15 mm
15 mm
Height
117 mm
117 mm
117 mm
117 mm
117 mm
Weights
Weight, approx.
40 g
40 g
47 g
40 g
40 g
6ES7193-6BP40-0BA1
BU15-P16+A0+12B/T
6ES7193-6BP40-0DA1
BU15-P16+A0+12D/T
Dimensions
Width
15 mm
15 mm
Height
141 mm
141 mm
Weights
Weight, approx.
50 g
50 g
6ES7193-6BP20-0BA0
BU15-P16+A10+2B
6ES7193-6BP20-0BB0
BU20-P12+A4+0B
6ES7193-6BP20-0DA0
BU15-P16+A10+2D
6ES7193-6BP20-0DC0
BU20-P6+A2+4D
Supply voltage
Rated value (AC)
230 V; 110 V
230 V; 110 V
Dimensions
Width
15 mm
20 mm
15 mm
20 mm
Height
141 mm
117 mm
141 mm
117 mm
Weights
Weight, approx.
50 g
48 g
50 g
47 g
9/50
Siemens AG 2014

ET 200SP
BaseUnits
Ordering data
Article No.
Type A0 BaseUnits
BU15-P16+A0+2D
BU15-P16+A0+12B/T
6ES7193-6BP00-0DA0

module and an additional 2x5 internally jumpered additional terminals
(1 B to 5 B and 1 C to 5 C);
6ES7193-6BP00-0BA0
Type F0 BaseUnits

(max. 10 A)
BU15-P16+A0+2B
BU15-P16+A10+2D
BU20-P8+A4+0B
6ES7193-6BP20-0DA0

group (max. 10 A)
BU15-P16+A10+2B
6ES7193-6BP20-0BA0
6ES7193-6BP20-0BB0
Type B1 BaseUnits
6ES7193-6BP20-0BB1

Type C0 BaseUnits
6ES7193-6BP20-0DC0
BU type C0; BaseUnit (light) with

6 push-in terminals (1...6) to the
module and an additional
2 AUX terminals; new load group
Type D0 BaseUnits
BU20-P12+A0+0B
6ES7193-6BP00-0BD0
BU type D0; BaseUnit (dark) with

12 push-in terminals, without
AUX terminals, bridged to the left
Type A1 BaseUnits
(with temperature detection)
BU15-P16+A0+2D/T
6ES7193-6BP00-0DA1

(max. 10 A)
BU15-P16+A0+2B/T
6ES7193-6BP00-0BA1

BU15-P16+A0+12D/T
module and an additional 2x5 internally jumpered additional terminals
(1 B to 5 B and 1 C to 5 C);
(max. 10 A)
6ES7193-6LF30-0AW0

group
BU20-P6+A2+4D
6ES7193-6BP20-0BF0
BU type F0; BaseUnit (dark) with

8 process terminals to the module
and an additional 4 internally
jumpered AUX terminals (1 A to
4 A); for continuing the load group
Type B0 BaseUnits
BU20-P12+A0+4B
6ES7193-6BP40-0BA1
Accessories

group
BU20-P12+A4+0B
Article No.
6ES7193-6BP40-0DA1
BU cover
5 units
15 mm wide
20 mm wide
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
Shield connection
6ES7193-6SC00-1AM0

terminals
Color-coded labels
terminals 1 A to 10 A,
terminals 1 A to 10 A, for BU type
A0, red, with push-in terminals;
10 units
terminals 1 A to 10 A, for BU type
A0, blue, with push-in terminals;
10 units
Color code CC74, for 2x5
additional terminals,5 x red,
5 x blue, for BU type A1, with
terminals 1 A to 4 A, yellow/green,
terminals 1 A to 4 A, red, for
BaseUnit type B0; 10 units
terminals 1 A to 4 A, blue, for
BaseUnit type B0; 10 units
terminals 1 A to 2 A, yellow/green,
for BaseUnit type C0; 10 units
terminals 1 A to 2 A, red, for
BaseUnit type C0; 10 units
terminals 1 A to 2 A, blue, for
BaseUnit type C0; 10 units
6ES7193-6CP01-2MA0
6ES7193-6CP02-2MA0
6ES7193-6CP03-2MA0
6ES7193-6CP04-2MA0
6ES7193-6CP71-2AA0
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP74-2AA0
6ES7193-6CP81-2AB0
6ES7193-6CP82-2AB0
6ES7193-6CP83-2AB0
6ES7193-6CP41-2MB0
6ES7193-6CP84-2AC0
6ES7193-6CP85-2AC0
6ES7193-6CP86-2AC0
9/51
Siemens AG 2014

ET 200SP
BusAdapters
Overview
Some interface modules of the SIMATIC ET 200SP have a
universal PROFINET interface for BusAdapters. With the appropriate BusAdapter, the type of connection can be adapted to the
requirements of the respective application:
For standard applications with a moderate mechanical and
EMC load, the BusAdapter BA 2xRJ45 is used. It offers two
sockets for standard RJ45 plugs.
For machines and systems in which higher mechanical and/or
EMC loads act on the devices, the BusAdapter BA 2xFC is
recommended. In this case, the bus cables are connected
directly by means of FastConnect terminals similar to the
PROFIBUS connector, proven in millions of applications. The
technology is extremely quick to assemble and achieves
5 times better vibration resistance and also 5 times greater
resistance to electromagnetic interference, when compared to
RJ45 plug-in connectors.
BusAdapters with connections for fiber-optic cables can be
used to cover high potential differences between two stations
and/or high EMC loads.
Another advantage of the BusAdapters: In order to repair

defective RJ45 sockets or for subsequent conversion to the
rugged FastConnect technology or a fiber-optic connection,
only the adapter needs to be replaced.
The following interface modules offer a PROFINET connection
via BusAdapter:
IM 155-6PN Standard
IM 155-6PN High Feature
9
BusAdapter BA 2xFC
Ordering data
Article No.
Article No.
6ES7193-6AR00-0AA0
BusAdapter BA 2xFC
for increased vibration
and EMC loads
6ES7193-6AF00-0AA0
BusAdapter BA 2xSCRJ,
fiber-optic connection for POF
or PCF cables up to 250 m,
with monitoring of damping
6ES7193-6AP00-0AA0
6ES7193-6LF30-0AW0
IE FC RJ45 plugs
Can only be used with High Feature

interface modules

installation cables
IE FC RJ45 Plug 180
180 cable outlet
9/52
1 unit
6GK1901-1BB10-2AA0
10 units
6GK1901-1BB10-2AB0
50 units
6GK1901-1BB10-2AE0
Siemens AG 2014

ET 200SP
Accessories
Overview
Labeling strips
Labeling strips for ET 200SP
Can be used for the interface module, bus adapter,
I/O module and BU cover
BU covers
Protective cover for empty slots of an ET 200SP
For protecting the plug-in connectors of a BaseUnit
without I/O module
Color-coded labels
For module-specific identification of the potentials at the
terminals of the BaseUnit
For the prevention of wiring faults
Ordering data
Article No.
Labeling strips
roll printer
6ES7193-6LR10-0AA0

roll printer
6ES7193-6LR10-0AG0

printer
6ES7193-6LA10-0AA0

printer
6ES7193-6LA10-0AG0
BU cover
5 units
15 mm wide
20 mm wide
Color-coded labels
Color code CC01,
A1; 10 units
Color code CC02,
A1; 10 units
Color code CC03,
A1; 10 units
Color code CC04,
A1; 10 units
Color code CC71,
Color code CC72,
terminals; 10 units
Color code CC73,
terminals; 10 units
Color code CC74,
for 2x5 additional terminals,
5 x red, 5 x blue, for BU type A1,
Color code CC81,
yellow/green, for BaseUnit type
B0; 10 units
Color code CC82,
for 4 AUX terminals 1 A to 4 A, red,
Color code CC83,
blue, for BaseUnit type B0;
10 units
Color code CC41,
terminals; for BaseUnit type B1;
10 units
Color code CC84,
yellow/green, for BaseUnit
type C0; 10 units
Color code CC85,
for 2 AUX terminals 1 A to 2 A, red,
for BaseUnit type C0; 10 units
Color code CC86,
blue, for BaseUnit type C0;
10 units
6ES7133-6CV15-1AM0
6ES7133-6CV20-1AM0
6ES7193-6CP01-2MA0
6ES7193-6CP02-2MA0
6ES7193-6CP03-2MA0
6ES7193-6CP04-2MA0
6ES7193-6CP71-2AA0
9
6ES7193-6CP72-2AA0
6ES7193-6CP73-2AA0
6ES7193-6CP74-2AA0
6ES7193-6CP81-2AB0
6ES7193-6CP82-2AB0
6ES7193-6CP83-2AB0
6ES7193-6CP41-2MB0
6ES7193-6CP84-2AC0
6ES7193-6CP85-2AC0
6ES7193-6CP86-2AC0
9/53
Siemens AG 2014

SIMATIC ET 200S
Overview
The following catalog pages contain non-binding information on
supplementary products that are manufactured and marketed,
not by Siemens, but by third-parties outside the Siemens group
("external companies"). These external companies organize the
manufacture, sale and delivery of their products independently.
Their own terms and conditions of business and delivery apply.
Responsibility for these supplementary products and for the
related information presented here therefore rests exclusively
with the respective external company. Unless compulsory by
law, Siemens assumes no liability and makes no guarantee for
the supplementary products of external companies. Please refer
also to the note on "Exemption from liability/Use of hyperlinks"
included with each product.
9/54
Siemens AG 2014

SIMATIC ET 200S
SIMATIC ET 200S 1-STEP-DRIVE-5A-48V
Overview
Suitable for bipolar control of 2-phase stepping motors of
4-, (6-) or 8-wire design (in 4-wire system)
5 A peak phase current with adjustable current steps
Power supply 24 V to 48 V DC
Up to 1/512 microstep (physical resolution: approx.
102,400 positions per revolution (0.0035 / step)).
A counter module with encoder should be evaluated for
microstep positioning
Maximum step frequency: 510,000 steps/s
2 digital inputs for limit and reference switches
Diagnostics LEDs (overcurrent, overtemperature, traversing
task or motor running, ...)
Short-circuit-proof, overload-proof
Online power output stage parameterization and diagnostics
Boost: boosted torque during acceleration or braking
Selectable current controller frequency: 18, 20, 22 or 25 kHz
Note
The 1-STEP-DRIVE-5A-48V module is a Phytron product and can
only be obtained from them.
More information
Overview
You can find further information on the module and associated

contact information on the Internet at:
http://www.phytron.de/1-step-drive
The 1-STEP-DRIVE-5A-48V module from Phytron is a highprecision stepper motor control with integrated power output
stage for use in the SIMATIC ET 200S distributed I/O system.
There you will also find the manual, the data sheet, the HSP,
a link to the GSD files as well as sample function blocks for
SIMATIC.
The module can be used together with system and I/O components of the ET 200S distributed I/O system. Operation is
possible with the following head assemblies:
IM PROFIBUS
IM PROFINET
ET 200S CPU
You can find Service and Support at:

http://www.phytron.de/support
Corresponding GSD files and an HSP are available for this.
Application
High-precision control of stepper motors:
The technology of the 1-STEP-DRIVE-5A-48V enables highly
precise current settings which facilitate fine positioning up to
1/512 step with an absolute error of only ~0.0015. This corresponds to approx. 102,400 positions per revolution or
0.0035/step with a 200-step motor.

This contribution includes addresses of third-party Web sites.
Siemens is not responsible for the contents of these Web sites,
nor does Siemens adopt these Web sites and their contents, as
Siemens does not control the information presented therein and
cannot be held responsible for the content and information they
contain. You therefore use these links at your own risk.
The module permits connection of a 2-phase stepping motor in

the 200 W power range up to 5 A peak with a power supply of
24 to 48 V DC.
Sample function blocks are available for operation with SIMATIC
and can be downloaded by the user from the Internet site
specified below and then modified.
The 1-STEP-DRIVE-5A-48V provides the following positioning
functions:
Absolute positioning
Relative positioning
Reference point approach
Endless axes: Speed mode/frequency output
Selection of feedback value
In the manufacturer's manual, you can find a list of possible
terminal modules with which the 1-STEP-DRIVE-5A-48V can be
operated.
9/55
Siemens AG 2014

SIMATIC ET 200S
SIMATIC ET 200S 1 SI CANopen
The 1 SI CANopen module has the following properties:
Operation either as CAN master or CAN slave
The module complies with the CiA301rev CANopen
specification. 4.2 or CiA302 (master).
It supports the transparent CAN 2.0A standard (11-bit
identifier). In this mode, CAN message frames can be sent
and received by the CPU program, thus enabling implementation of customized CAN protocols.
When used as master, up to 126 slaves, e.g. valves or
actuators, can be operated on the module.
Overview
More information
The CANopen bus can be configured via any commercially
available CANopen configuration tool. The HMS company
provides corresponding "Anybus Configuration Manager
CANopen" software together with the product. The configuration
is saved directly in the module by means of a point-to-point
connection via a USB to CAN adapter. Routing via
PROFIBUS/PROFINET is not possible.
Note
The 1 SI CANopen module is an HMS product and can only be
obtained from them.
Overview
A CANopen module (1 SI CANopen) from HMS is available for
use in ET 200S. It can be used together with system and I/O
components of the ET 200S distributed I/O system. Operation is
possible with the following head assemblies:
IM PROFIBUS
IM PROFINET
ET 200S CPU
Corresponding GSD files and an HSP are available for this.
In the manual, you can find a list of possible terminal modules

with which the 1 SI CANopen module can be operated.
Please note that the module cannot be operated together with
the ET 200S COMPACT or the BASIC header of the ET 200S.
Please refer to the manual for the currently approved Article
No.'s. of the ET 200S head assemblies.
Application
CANopen is a widely used industrial bus system for a variety of
different applications. The module allows simple and costeffective connection of CANopen applications to SIMATIC.
Control of hydraulic valves/axes in vehicles
Control of motors in packaging machines or conveyors
Capturing angular encoder positions in wind turbines
Capturing of control devices on machines, e.g. joysticks
Capturing the measured data of path encoders, inclinometers
or angular encoders, e.g. for tower cranes or gantry cranes
9/56
Function blocks are available for operation with SIMATIC and

can be downloaded by the user from the Internet site specified
below.
The module is also available in a SIPLUS version for use in
extreme conditions as encountered e.g. on vehicles used
outdoors. This version is also only available from HMS.
For further information, please contact HMS directly:
http://www.hms-networks.com/can-for-et200s
There you will also find the manual, the HSP, a link to the GSD
files as well as the function blocks for SIMATIC.
Ordering and Support
Please note that ordering and support for the module are exclusively carried out via HMS. Please contact HMS directly should
you have any questions concerning this module. The relevant
contact details can be found on the Internet at
http://www.hms-networks.com/can-for-et200s
This contribution includes addresses of third-party Web sites.
Siemens is not responsible for the contents of these Web sites,
nor does Siemens adopt these Web sites and their contents, as
Siemens does not control the information presented therein and
cannot be held responsible for the content and information they
contain. You therefore use these links at your own risk.
Siemens AG 2014

ET 200MP
Interface modules
IM 155-5 PN
Overview
6ES7155-5AA00-0AB0
IM 155-5 PN ST
Engineering with
STEP 7 TIA Portal can be V13 / V13
of version
STEP 7 can be
V5.5 SP3 / configured/integrated as
of version
PROFINET as of GSD
V2.3 / version/GSD revision
Interface modules for linking the ET 200MP to PROFINET

These handle data exchange with the PROFINET I/O controller
in the PLC
Integrated 2-port switch for line topology
Max. 30 I/O modules
Shortest bus cycle 250 s
Linking to the isochronous task of the CPU
Prioritized fast startup (FSU) with 500 ms
(max. 12 I/O modules)
Media Redundancy Protocol (MRP)
Shared device on up to two I/O controllers (when configuring
using GSD file; depends on the respective configuration tool)
Omission of SIMATIC memory card (SMC); IM replacement
without PG using LLDP
Starting from FW version V2.0.0, the IM155-5 PN ST interface
module supports the following new functions:
Submodule-granular shared device with up to
two I/O controllers
Configuration control (option handling)
Module-internal shared input and output (MSI/MSO),
i.e. the inputs or outputs of a module can be made available
simultaneously to up to two I/O controllers
The IM155-5 PN HF interface module has the following
additional functions:
Shared device on up to 4 IO controllers
Module-internal shared input and output (MSI/MSO) on up to
four IO controllers
Operation on a highly available SIMATIC S7-400H
Support for the MRPD function (media redundancy with
planned duplication)
General information
Product function
I&M data
6ES7155-5AA00-0AB0
IM 155-5 PN ST
6ES7155-5AA00-0AC0
IM 155-5 PN HF
Yes; I&M0 to I&M3
Yes; I&M0 to I&M3
6ES7155-5AA00-0AC0
IM 155-5 PN HF
V13 / V13
V5.5 SP3 / -
V2.3 / -
Supply voltage
DC
DC
Rated value (DC)
24 V
24 V
Yes
Yes
Yes
Mains buffering
Mains/voltage failure
stored energy time
5 ms
5 ms
Integrated power supply
Rack
maximum
Interfaces
Number of PROFINET
interfaces
1st interface
Interface types
- Number of ports
- Integrated switch
- RJ 45 (Ethernet)
Protocols
- Media redundancy
Yes
30; I/O modules
30; I/O modules
2
Yes
Yes
2
Yes
Yes
Yes
Yes
Yes
Yes
Interface types
RJ 45 (Ethernet)
10 Mbps
100 Mbps
Yes
Transmission procedure PROFINET with
(100BASE-TX)
Autonegotiation
Yes
Yes
Autocrossing
Protocols
Supports protocol for
PROFINET IO
No
Yes
PROFINET with
(100BASE-TX)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
Yes
Yes
4
Yes
Yes
Yes
Yes
Yes
Yes
Isochronous mode
Yes
up to terminal)
Yes
Yes
Yes
PROFINET IO Device
Services
- Isochronous mode
- IRT, supported
- MRP, supported
- MRPD, supported
- PROFINET system
redundancy
- Prioritized startup
- Shared device
- Number of IO
controllers with shared
device, max.
TCP/IP
SNMP
LLDP
equidistance
9/57
Siemens AG 2014

ET 200MP
Interface modules
IM 155-5 PN

6ES7155-5AA00-0AB0
IM 155-5 PN ST
6ES7155-5AA00-0AC0
IM 155-5 PN HF
shortest clock pulse
250 s
250 s
max. cycle
4 ms
4 ms
status information
Status indicator
Yes
Yes
Alarms
Alarms
Yes
Yes
Diagnostic messages
Yes
Yes
Ordering data
6ES7155-5AA00-0AC0
IM 155-5 PN HF
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; yellow LED
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Yes; yellow LED
Isolation
Dimensions
Width
35 mm
35 mm
Height
147 mm
155 mm
Depth
129 mm
120 mm
Weights
Weight, approx.
310 g
350 g
LED
RUN LED
ERROR LED
MAINT LED
Connection display
LINK TX/RX
Article No.
Article No.
IM 155-5 PN interface module
IE FC RJ45 plugs
IP 20 degree of protection,
module width 35 mm, installation
on S7-1500 mounting rail

installation cables
IM 155-5 PN ST, standard version
6ES7155-5AA00-0AB0
IM 155-5 PN HF, High Feature

version with additional functions
6ES7155-5AA00-0AC0
IE FC RJ45 plug 180
Accessories
6ES7155-5AA00-0AB0
IM 155-5 PN ST
180 cable outlet
Front flap for IM 155-5 PN

(spare part), 5 units
6ES7528-0AA70-7AA0

elements
160 mm
482 mm
530 mm
830 mm
separately
2000 mm
PE connection element
for mounting rail 2000 mm
6ES7590-1AB60-0AA0
6ES7590-1AE80-0AA0
6ES7590-1AF30-0AA0
6ES7590-1AJ30-0AA0
6ES7590-1BC00-0AA0
6ES7590-5AA00-0AA0
Power supply
For supplying the backplane bus
of the S7-1500
6GK1901-1BB10-2AB0
50 units
6GK1901-1BB10-2AE0
6XV1840-2AH10

cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compatible;
with UL approval;
(Type C)
6XV1840-3AH10

cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug
180/90 for trailing cable use;
PROFINET-compatible;
with UL approval;
Sold by the meter, max. length
1000 m; minimum order 20 m
6ES7505-0KA00-0AB0

power 60 W
6ES7505-0RA00-0AB0

power 60 W
6ES7507-0RA00-0AB0
Power connector
6ES7590-8AA00-0AA0

(Type B)
24 V DC/3 A
6EP1332-4BA00
24 V DC/8 A
6EP1333-4BA00
6ES7193-4JB00-0AA0
6XV1840-4AH10

marine certified,
Load power supply
9/58
6GK1901-1BB10-2AA0
10 units

20 units

1 unit

cables
6GK1901-1GA00
Siemens AG 2014

ET 200MP
Interface modules
IM 155-5 DP
Overview
6ES7155-5BA00-0AB0
Interface module for linking the ET 200MP to PROFIBUS

Handles data exchange with the PROFIBUS master in the PLC
Max. 12 I/O modules
Automatic detection of baud rate 9.6 kBd ... 12 MBd
PROFIBUS addresses 1 ... 125; adjustable using DIP switches
Identification and maintenance data IM0 ... IM3
Interface types
RS 485
Transmission rate, max.
12 Mbit/s
Protocols
PROFIBUS
Services
- SYNC capability
- FREEZE capability
- DPV1
Yes
Yes
Yes
status information
Status indicator
Yes
Alarms
Alarms
Yes
Diagnostic messages
Yes

RUN LED
ERROR LED
MAINT LED
Yes; Green LED

Yes; Red LED
Yes; yellow LED
Isolation
Dimensions
Width
35 mm
Height
147 mm
Depth
129 mm
Weights
Weight, approx.
360 g
6ES7155-5BA00-0AB0
General information
Product function
I&M data
Engineering with
STEP 7 can be
revision
Ordering data
Yes; I&M0 to I&M3
V13 / V13
V5.5 SP3 / V1.0 / V5.1
Supply voltage
DC
Rated value (DC)
24 V
Yes
IM 155-5 DP ST interface module
Article No.
6ES7155-5BA00-0AB0
IP 20 degree of protection,
module width 35 mm, installation
on S7-1500 mounting rail
Accessories
Front flap for IM 155-5 PN
(spare part), 5 units
6ES7528-0AA70-7AA0
Mains buffering
Mains/voltage failure stored energy 5 ms
time
Rack
maximum
12; I/O modules
Interfaces
Number of PROFIBUS interfaces
1st interface
Protocols
- PROFIBUS DP slave
Yes

elements
160 mm
482 mm
530 mm
830 mm
6ES7590-1AB60-0AA0
6ES7590-1AE80-0AA0
6ES7590-1AF30-0AA0
6ES7590-1AJ30-0AA0

separately
2000 mm
6ES7590-1BC00-0AA0

6ES7590-5AA00-0AA0
20 units
Load power supply
24 V DC/3 A
6EP1332-4BA00
24 V DC/8 A
6EP1333-4BA00
9/59
Siemens AG 2014

ET 200MP
Interface modules
IM 155-5 DP
Ordering data
Article No.
FC trailing cable
Spare part; for connecting the

24 V DC supply voltage
PROFIBUS trailing cable,

at least 3 million bending cycles,
min. bending radius approx.
120 mm, 2-core, shielded,
sold by the meter, max. delivery unit
1000 m, minimum ordering quantity
20 m
PROFIBUS connector
Connector for PROFIBUS,
up to 12 Mbit/s, 90 cable outlet,
insulation displacement system,
without PG socket
Connector for PROFIBUS,
up to 12 Mbit/s, 90 cable outlet,
insulation displacement system,
with PG socket
PROFIBUS Stripping Tool
6ES7193-4JB00-0AA0
6ES7972-0BA70-0XA0
FC bus cable
6ES7972-0BB70-0XA0
6GK1905-6AA00
Stripping tool for fast stripping

of the PROFIBUS
bus cable
for quick mounting, 2-core,
shielded, sold by the meter,
max. delivery unit 1000 m,
minimum ordering quantity 20 m
20 m
50 m
100 m
200 m
500 m
1000 m
FC robust cable
Article No.
6XV1830-0JH10
Bus cable with PUR sheath for use

under conditions of extreme
mechanical stress or aggressive
chemicals, 2-core, shielded, sold
by the meter, maximum delivery unit
1000 m, minimum order quantity
20 m
FC flexible cable
6XV1831-2K
9/60
6XV1830-0LH10
PROFIBUS bus cable,

flame-retardant and halogen-free,
with copolymer sheath FRNC,
1000 m, minimum order quantity
20 m
FC trailing cable
6XV1831-2L
PROFIBUS trailing cable,

at least 3 million bending cycles,
min. bending radius approx.
120 mm, 2-core, shielded,
1000 m, minimum ordering quantity
20 m
PROFIBUS bus cable, flexible, with

special design for quick mounting,
2-core, shielded, sold by the meter,
max. delivery unit 1000 m, minimum
ordering quantity 20 m
6XV1830-3FH10
PROFIBUS underground cable,

2-core, shielded, sold by the meter,
maximum delivery unit 1000 m,
minimum order quantity 20 m
FC FRNC cable
6XV1830-0EN20
6XV1830-0EN50
6XV1830-0ET10
6XV1830-0ET20
6XV1830-0ET50
6XV1830-0EU10
6XV1830-0GH10
PROFIBUS Food bus cable with

PE sheath for use in the food and
beverages industry, 2-core,
shielded, sold by the meter,
maximum delivery unit 1000 m,
minimum order quantity 20 m
FC underground cable
6XV1830-0EH10
6XV1830-3EH10

cables
6GK1901-1GA00
Siemens AG 2014

ET 200M
SIPLUS IM 153-1/153-2
Overview
Note:
Based on
Ambient conditions
Min.
max.

altitude
Relative humidity
maximum
Resistance
with EN 60721-3-3
with EN 60721-3-3
with EN 60721-3-3
6AG1153-1AA03-2XB0
6AG1153-2BA02-2XY0
6AG1153-2BA02-7XB0
6ES7153-1AA03-0XB0
6ES7153-2BA02-0XB0
6ES7153-2BA02-0XB0
-40 C; = Tmin
-25 C; = Tmin
-40 C; = Tmin
70 C; = Tmax; 60 C @ UL/cUL, ATEX 60 C; = Tmax; the rated temperature 70 C; = Tmax; 60 C @ UL/cUL use
and FM use
range of -25 ... +55 C (T1) applies for
the use on railway vehicles according
to EN50155
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
-25 C
-25 C

fauna).
during operation!
according to EN 60068-2-52
(degree of severity 3).
during operation!
during operation!

fauna).
during operation!
during operation!
during operation!

fauna).
during operation!
during operation!
during operation!
9/61
Siemens AG 2014

ET 200M
SIPLUS IM 153-1/153-2

Based on
Ambient conditions
Min.
max.
6AG1195-7HA00-2XA0
6AG1195-7HB00-7XA0
6AG1195-7HC00-2XA0
6ES7195-7HA00-0XA0
6ES7195-7HB00-0XA0
6ES7195-7HC00-0XA0
-25 C; = Tmin
-25 C; = Tmin
-25 C; = Tmin
70 C; = Tmax; 60 C @ UL/cUL, ATEX 70 C; = Tmax; 60 C @ UL/cUL, ATEX 70 C; = Tmax; 60 C @ UL/cUL, ATEX
and FM use
and FM use
and FM use

altitude
Relative humidity
- With condensation/maximum/tested
in accordance with IEC 60068-2-38
Resistance
- to biologically active substances
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
100 %

during operation!
- to chemically active substances
- to mechanically active substances Yes; Class 3S4 incl. sand, dust. The
during operation!
Ordering data
6AG1153-1AA03-2XB0
6AG1153-1AA03-2XB0
SIPLUS ET 200M IM 153-2

High Feature
Slave interface for connecting
an ET 200M to PROFIBUS DP for
a maximum of 12 S7-300 modules;
also for use in redundant systems
exposure to media
conforms to EN 50155
Bus module for accommodating

two 40-mm wide I/O modules for the
hot-swapping function
exposure to media
one 80 mm wide I/O module for the
hot swapping function
exposure to media
9/62

during operation!
during operation!

during operation!
during operation!
Article No.
two IM-153 modules for the hotswapping function; for setting up
redundant systems
exposure to media
6AG1195-7HD10-2XA0

max. transfer rate 12 Mbit/s
exposure to media
without PG interface
with PG interface
6AG1153-2BA02-7XB0
6AG1153-2BA02-2XY0
Bus module for SIPLUS ET 200M

a power supply and an IM 153
module for the hot-swapping
function during RUN, incl. bus
module cover
exposure to media
100 %
Article No.
SIPLUS ET 200M IM 153-1

Slave interface for connecting an
ET 200M to PROFIBUS DP for a
maximum of 8 S7-300 modules
exposure to media
conformity to EN 50155
100 %
6AG1195-7HA00-2XA0
6AG1195-7HB00-7XA0
6AG1195-7HC00-2XA0
Further accessories
6AG1972-0BA12-2XA0
6AG1972-0BB12-2XA0
see SIMATIC ET 200M
IM 153-1/153-2,
Siemens AG 2014

ET 200pro
I/O modules
Overview
6ES7144-4FF01-0AB0
Input ranges (rated
values), voltages
0 to +10 V
1 to 5 V
-10 V to +10 V
-5 V to +5 V
-80 mV to +80 mV
Input resistance
(-80 mV to +80 mV)
Expansion modules with analog inputs and outputs for

connecting sensors/actuators
With diagnostics functionality, limit values and substitute
values
6ES7144-4FF01-0AB0
Supply voltage
Load voltage L+
Rated value (DC)
Reverse polarity
protection
6ES7144-4GF01-0AB0
24 V
24 V
Yes; against destruction Yes; against destruction
Input current
from load voltage L+
(without load), max.
from backplane bus 3.3 V 12 mA
DC, max.
Encoder supply
Power losses
Power loss, typ.
Address area
Address space per
module
Address space per
module, max.
Analog inputs
permissible input voltage
for voltage input
12 mA
Yes; per module,

electronic to frame
Yes; per module,

electronic to frame
1.1 W
1.1 W
8 byte
8 byte
35 V
40 mA
Constant measurement
current for resistance-type
transmitter, typ.
Cycle time (all channels)
max.
5 ms
10 ms
Technical unit for

temperature measurement
adjustable
Input ranges
Voltage
Current
Thermocouple
Resistance thermometer
Resistance

Integrations and
conversion time/resolution
per channel
Resolution with
overrange (bit including
sign), max.
Integration time, ms
suppression for interference frequency f1
in Hz
Conversion time
(per channel)
Smoothing of measured
values
Parameterizable
Step: None
Step: low
Step: Medium
Step: High
Yes
No
No
No
No
No
Yes
No
No
No
Yes
50
Yes
50
Yes
50
30 m
30 m
integrating
integrating
15 bit; 15 bits + sign at

10 V, at 5 V; 15 bits at
0 V to 10 V, at 1 V to 5 V
0,3 / 16,7 / 20 / 60
16,67 / 50 / 60 / 3600
15 bit; 15 bits + sign at

10 V, at 5 V; 15 bits at
0 V to 10 V, at 1 V to 5 V
0,3 / 16,7 / 20 / 60
16,67 / 50 / 60 / 3600
1.1 ms
1.1 ms
Yes
Yes; 1 x cycle time
Yes; 4 x cycle time
Yes; 16 x cycle time
Yes
Yes; 1 x cycle time
Yes; 4 x cycle time
Encoder
for current measurement
as 2-wire transducer
for current measurement
as 4-wire transducer
Errors/accuracies
Linearity error (relative to
input range), (+/-)
Crosstalk between the
inputs, min.
permissible input current

for current input
Yes
Yes
Yes
Yes
Input ranges (rated

values), currents
0 to 20 mA
Input resistance
(0 to 20 mA)
-20 to +20 mA
Input resistance
(-20 to +20 mA)
4 to 20 mA
Input resistance
(4 to 20 mA)
Cable length
Cable length, shielded,
max.
6ES7144-4GF01-0AB0
Yes
Yes
0.0075 %
0.0075 %
-70 dB
-70 dB
Repeat accuracy in steady 0.004 %

state at 25 C (relative to
input area), (+/-)
Operational limit in overall
temperature range
Voltage, relative to input 0.1 %
area, (+/-)
Current, relative to input
area, (+/-)
Basic error limit (operational limit at 25 C)
Voltage, relative to input 0.075 %
area, (+/-)
Current, relative to input
area, (+/-)
0.004 %
0.1 %
0.075 %
9/63
Siemens AG 2014

ET 200pro
I/O modules

6ES7144-4FF01-0AB0
suppression for
f = n x (f1 +/- 0.5 %),
f1 = interference
frequency
Series mode interference 60 dB
(peak value of interference < rated value of
input range), min.
common mode voltage 80 dB; Interference
(USS < 2.5 V) , min.
voltage < 10 V
status information
Alarms
Diagnostic alarm
Limit value alarm
Hardware interrupt
Diagnostic messages
Diagnostics
Wire break
Short circuit
Group error
Overflow/underflow
LED
Group error SF (red)
Ordering data
6ES7144-4GF01-0AB0
6ES7144-4FF01-0AB0
High Feature, 10 V; 5 V;
0 to 10 V; 1 to 5 V, channel-specific
diagnostics, including bus module.
Connection module must be
ordered separately
60 dB
80 dB; Interference
voltage < 5 V
4AI I analog input module
6ES7144-4GF01-0AB0
High Feature, 20 mA; 0 to 20 mA;

4 to 20 mA, channel-specific
diagnostics, including bus module.
Connection module must be
ordered separately
Accessories
Yes
Yes; (limit value alarm),
for channel 0
Yes
Yes; (limit value alarm),
for channel 0
Yes
Yes; at 1 to 5 V
Yes; at 1 to 5 V
Yes
Yes
Yes; at 4 to 20 mA
Yes; at 4 to 20 mA
Yes
CM IO 4 x M12 connection
module
6ES7194-4CA00-0AA0
4 M12 sockets for connecting

digital or analog sensors or
actuators to ET 200pro
M12 compensation connectors
6ES7194-4AB00-0AA0
with integral PT100 for reference

point compensation when
connecting thermocouples
Module identification labels
6ES7194-4HA00-0AA0
for color coding of the CM IOs in the

colors of white, red, blue and green;
pack with 100 units each
Yes
Galvanic isolation
Galvanic isolation analog
inputs
No
Yes
and the load voltage L+
Yes
between inputs and MANA 10 Vpp AC

(UCM)
No
Yes
5 Vpp AC
between MANA and M

internally (UISO)
Isolation
500 V DC
500 V DC
Dimensions
Width
45 mm
45 mm
Height
130 mm
130 mm
Depth
35 mm
35 mm
Weights
Weight, approx.
150 g
150 g
M12 sealing cap

for protection of unused M12
connections with ET 200pro
Permissible potential
difference
between the inputs (UCM)
9/64
4AI U analog input module
Article No.
3RX9802-0AA00
Siemens AG 2014

PROFINET components
Enhanced Real-Time Ethernet Controller ERTEC
Overview
With the Industrial Ethernet ASICs of the ERTEC family

(Enhanced Real-Time Ethernet Controller), devices and systems
can be connected to PROFINET without great effort. The highperformance Ethernet controllers with 32-bit microprocessor as
well as integral real-time switch for Real Time Ethernet have
been specially developed for industrial use.
These Ethernet controllers handle all the data transmission for

PROFINET with Real-Time (RT) and Isochronous Real-Time (IRT)
and thus offload the application processor. Thanks to the integral
2-port switch (ERTEC 200 and ERTEC 200P) or 4-port switch
(ERTEC 400), there are no costs for external switches. Flexible
topologies such as star, tree and linear topologies can be implemented without any other external network components.
ERTEC 200P
with integral 2-port switch and maximum performance for
compact and modular PROFINET field devices.
The ERTEC 200P is designed for cycle times up to 31.25 s.
In conjunction with a high-speed ARM 926 CPU, it meets all
the requirements for powerful PROFINET implementation.
ERTEC 200
with an integral 2-port switch for developing compact or
modular PROFINET field devices.
ERTEC 400
with 4 integral ports and one integral PCI interface for developing network components and field devices with specific
requirements regarding communication capabilities.
The EK-ERTEC 200P PN IO, DK-ERTEC 200 PN IO and
DK-ERTEC 400 PN IO development kits enable the uncomplicated development of PROFINET field devices thanks to fast
and simple integration of the PROFINET IO functionalities based
on the ERTEC.
ERTEC 400
ERTEC 200
ERTEC 200P
Transmission rate
10/100 Mbit/s
10/100 Mbit/s
100 Mbit/s
Interfaces
Ethernet / PHY interface
4 x PHY interface
2 x Ethernet interface (PHY integrated) 2 x Ethernet interface (PHY integrated)

or alternatively
or alternatively 2 x PHY interface (for
2 x PHY interface (for connection of
connection of optical PHYs)
optical PHYs)
Half/full duplex
Support for copper and fiber-optic
cables;
autosensing;
autocrossover
Local bus master interface for
connecting an external host with
access to internal areas of the ERTEC;
16 bit data bit width
Half/full duplex
cables (PHY for copper integrated);
autosensing;
autocrossover
Local bus master interface for
connecting an external host with
access to internal areas of the ERTEC;
16 bit data bit width
Half/full duplex
cables (PHY for copper integrated);
autosensing;
autocrossover
XHIG (external host interface);
16/32 bit data bit width
128 MB/16 bit or 256 MB/32 bit

4 x 16 MB for asynchronous blocks
(SRAM, flash, I/O 8/16/32 bit)
yes
32 parameterizable I/O (GPIO);
multifunctional outputs
yes

yes
45 parameterizable I/O (GPIO);
yes

yes
up to 96 parameterizable I/O (GPIO);
yes
ARM processor
Integral ARM946 processor
- Adjustable operating frequency
32-bit ARM system

50/100/150 MHz
32-bit ARM system

50/100/150 MHz
32-bit ARM system

125/250 MHz
Supply voltage
Core (VDD Core)
I/Os (VDD IO)
External host interface (XHIF)
PHY
External host interface (XHIF)
1.5 V +/- 10 %
3.3 V +/- 10 %
-
1.5 V +/- 10 %
3.3 V +/- 10 %
-
1.2 V +5%/-0.1 V
3.3 V +5%/-10%
1.8 V +5%/-10%
1.5 V +5%/-10%
1.8 V/3.3 V +5%/-10%
Perm. ambient conditions

Transport/storage temperature
Relative humidity
-40 C to +85 C
-40 C to +85 C
Max. 95 % at +25 C
-40 C to +85 C
-40 C to +85 C
Max. 95 % at +25 C
-40 C to +85 C
-40 C to +85 C
Max. 95 % at +25 C
- In connection with the

corresponding PHY types:
Local Bus Unit (LBU)
External memory interface (EMIF)

- SDRAM controller
- SRAM controller
- Chip-select support
IO interfaces
Intelligent switching and PROFINET
IRT prioritization/timing
9/65
Siemens AG 2014

PROFINET components
Enhanced Real-Time Ethernet Controller ERTEC

Constructional design
Housing
Pinning Ball Pitch
Dimensions (W x H x D) in mm
- ERTEC
Supported communications protocols
General Ethernet protocols
PROFINET in combination with a

PROFINET Software Stack
Ordering data
ERTEC 400
ERTEC 200
ERTEC 200P
Plastic FBGA 304 Pin

0.8 mm

0.8 mm

0.8 mm
19 x 1 x 19
19 x 1 x 19
17 x 1 x 17
In accordance with the respective

software implementation that uses the
ERTEC as Ethernet controller
Real-Time communication (RT);
Isochronous Real-Time communication
(IRT)

(IRT)

(IRT)
Article No.
ERTEC 200P
ASIC for connection to Switched
Ethernet 100 Mbit/s, Ethernet
controller with integral 2-port
switch, ARM 926 processor and
integral PHYs
10 units (Evaluation Pack)
90 units (individual tray)
450 units (drypack, 5 trays)
Evaluation Kit
EK-ERTEC 200P PN IO
9/66
Development Kit
DK-ERTEC 200 PN IO
6GK1953-0BA00
ERTEC 200 PN IO Starter Kit
6ES7195-3BD00-0YA0
ERTEC 400
6ES7195-0BH00-0XA0
6ES7195-0BH10-0XA0
6ES7195-0BH20-0XA0
6ES7195-3BE00-0YA0
ERTEC 200
ASIC ERTEC 200 for connection to
Switched Ethernet 10/100 Mbit/s,
Ethernet controller with integral
2-port switch, ARM 946 processor
and integral PHYs
70 units (individual tray),
350 units (drypack, 5 trays),
3500 units (package,
10 drypacks)
Article No.

switched Ethernet 10/100 Mbit/s,
Ethernet controller with integrated
4-port switch, ARM 946 RISC and
PCI interface (V2.2), data preparation for real-time and isochrone
real-time for PROFINET IO
70 units (individual tray),
Development kit
DK-ERTEC 400 PN IO
6GK1182-0BB01-0AA1
6GK1182-0BB01-0AA2
6GK1182-0BB01-0AA3
6GK1184-0BB01-0AA1
6GK1184-0BB01-0AA2
6GK1953-0CA00
Siemens AG 2014

PROFINET components
Development kits
Overview
Ordering data
Article No.
ERTEC development kits

Evaluation Kit
EK-ERTEC 200P PN IO
6ES7195-3BE00-0YA0
Development kit
DK-ERTEC 200 PN IO
6GK1953-0BA00
Development kit
DK-ERTEC 400 PN IO
6GK1953-0CA00
ERTEC 200 PN IO Starter Kit
6ES7195-3BD00-0YA0
Development kit for standard

Ethernet controller
6ES7195-3BC00-0YA0
PROFIsafe starter kit V3.4
6ES7195-3BF02-0YA0
ERTEC ASICs
ERTEC 200P
With the development packages for PROFINET, compact or

modular PROFINET field devices can be developed quickly and
with little effort. Depending on the application, different development packages are available.
The development packages for the ASICs of the ERTEC family
(Enhanced Real-Time Ethernet Controller) are suitable for the
development of field devices with an integrated IRT switch
(Isochronous Real-Time). The demand for real-time capability,
linear topology capability, and for IT integration is therefore met
perfectly.
With the help of the development package for standard Ethernet
controllers, PROFINET devices can be developed on the basis
of a standard Ethernet controller. Devices with RT (Real-Time)
can be implemented in the field device without special
hardware.
The PROFIsafe StarterKit permits the implementation of fail-safe
devices. In so doing, the PROFIsafe Stack applicatively builds
on the PROFINET stack.
ASIC for connection to Switched

Ethernet 100 Mbit/s, Ethernet
controller with integral 2-port
switch, ARM 926 processor and
integral PHYs
10 units (Evaluation Pack)
90 units (individual tray)
450 units (drypack, 5 trays)
6ES7195-0BH00-0XA0
6ES7195-0BH10-0XA0
6ES7195-0BH20-0XA0
ERTEC 200
and integral PHYs
70 units (individual trays),
3500 units (package,
10 drypacks)
6GK1182-0BB01-0AA1
6GK1182-0BB01-0AA2
6GK1182-0BB01-0AA3
ERTEC 400
and PCI interface (V2.2)
70 units (individual trays),
9
6GK1184-0BB01-0AA1
6GK1184-0BB01-0AA2
Accessories
PROFINET IO product line license
for one product line
6ES7195-3BC10-0YA0
9/67
Siemens AG 2014

PROFINET components
PROFINET Driver
Overview
Ordering data
For connecting distributed I/O and drives to user-specific

control applications via PROFINET
Operation of the control software on a standard PC using the
standard Ethernet interface of the PC;
Supplied as portable source code and can therefore be used
with any operating system
Sample application for Windows included in the scope of
delivery; uses SIMATIC IPCs as example hardware
9/68
Article No.
PROFINET Driver
For connecting distributed I/O
and drives to user-specific control
applications via PROFINET
Development license
6ES7195-3AA00-0YA0
Runtime licenses
10 units
50 units
200 units
500 units
6ES7195-3AA10-0XA0
6ES7195-3AA20-0XA0
6ES7195-3AA30-0XA0
6ES7195-3AA40-0XA0
11
Siemens AG 2014
Software for
SIMATIC controllers
11/2
11/2
Introduction
Software Update Service
11/3
11/3
11/6
Controller Software inside TIA Portal

STEP 7 (TIA Portal)
STEP 7 Safety (TIA Portal)
11/7
11/7
Options for diagnostics and service

TeleService
11/10
Options for engineering and drive

technology
PID Professional
S7-Technology
Easy Motion Control
11/10
11/11
11/12
11/13
11/13
Software for joint tasks

in the maintenance sector
SIMATIC PDM
Brochures
printmaterial
Siemens AG 2014

Introduction
Information on software licensing
Overview Licensing
Software types
Siemens Industry Automation & Drive Technologies offers
different types of licenses for software.
For further information, see chapter 15, page 15/29.
Overview Software Update Service

Service for automatic dispatch of all new software versions
during contract lifetime
Reduced logistics effort thanks to automatic contract
extension
Reduced costs as updates are provided free of charge
Ordering
The Software Update Service is ordered in the same way as
any other product. The corresponding order number is given
in the ordering information of the software product in question.
You must own the current version of the software.
One Software Update Service is ordered for each software
license installed.
The Software Update Service runs for 1 year from date of
order.
It is extended automatically by a further year in each case,
as long as it is not canceled 3 months before it expires.
An annual lump sum is invoiced per license.
Application
SIMATIC software is continuously enhanced and improved.
The Software Update Service is the easiest way to regularly
take advantage of these improvements. This service automatically sends new software updates when they are released so
you always have the latest version.
The Software Update Service
Saves time and effort:
Once it is ordered, the Software Update Service is
automatically renewed every year.
Lowers costs:
The service pays for itself after the first update as it costs less
than an individually ordered update.
Makes budgeting easier:
Software expenditures can be accounted for early in the
budgeting process and they are easier to write off.
11
11/2
Siemens AG 2014

STEP 7 (TIA Portal)
Overview
(TIA Portal)
Type of license
Floating license
Software class
Current version
V13
Target system
SIMATIC S7-1200, S7-1500, S7-300,

S7-400, WinAC
Operating system
Windows 7 (64-bit)
Windows 7 Enterprise SP1
Windows 7 Ultimate SP1
Windows 8.1 (64-bit)
Windows 8.1
Windows 8.1 Professional
Windows 8.1 Enterprise
Windows Server (64-bit)
Windows Server 2008 R2 StdE SP1
(full installation)
(full installation)
STEP 7 V13 (TIA Portal), portal view

Computer
SIMATIC Field PG M4 PREMIUM or

higher (or comparable PC)
Processor
Intel Core i5-3320M 3.3GHz or higher
RAM
min. 8 GB
Hard disk
300 GB SSD
Screen
15.6" widescreen display

(1920 x 1080)
Note
Includes the IEC programming

languages SCL, LAD, FBD, STL and
GRAPH
Compatibility with other SIMATIC products

STEP 7 Professional / Basic V13 (incl. WinCC Basic V13) can be
installed on a PC in parallel with other versions of STEP 7 V12,
V5.4 or V5.5, STEP 7 Micro/WIN, WinCC flexible (from 2008) and
WinCC (V7.0 SP2 or higher).
STEP 7 V13 (TIA Portal), device view: configuring and parameterizing in

photographically realistic representation
Intuitive, efficient and future-oriented - the engineering

software for programming the SIMATIC controllers
11
SIMATIC STEP 7 Professional V13 is the engineering system for

the SIMATIC controllers S7-1200, S7-300, S7-400, WinAC, and
also optimally supports the new SIMATIC S7-1500 controllers.
SIMATIC STEP 7 Basic V13 is the engineering system for the
S7-1200.
STEP 7 V13 is based on the central engineering framework
Totally Integrated Automation Portal (TIA Portal), which offers the
user a uniform, efficient and intuitive solution to all automation
tasks.
11/3
Siemens AG 2014

STEP 7 (TIA Portal)
Ordering data
Article No.

Target system:
SIMATIC S7-1200, S7-1500,
S7-300, S7-400, WinAC
Requirement:
(64 bit),
(full installation)
Form of delivery:
French, Spanish
6ES7822-1AA03-0YA5

Floating License,
software download
6ES7822-1AE03-0YA5

6ES7822-1AA03-0YA7

promotional package
11
Only valid if ordered together

with a Software Update Service
6ES7810-5CC04-0YE2
(STEP 7 Professional and
STEP 7 Professional in TIA Portal).
PowerPack & upgrade from
STEP 7 V5.5 to
STEP 7 Professional 2010/V13,
Floating License.
Prerequisite is an existing STEP 7
Software Update Service.
STEP 7 V5.5 to
Floating License.
Software Update Service.
Software download
E-mail address required for
delivery
STEP 7 V5.4/V5.5, ... to
Floating License.
Standard/Professional installation.
STEP 7 V5.4/V5.5, ... to
Floating License.
Standard/Professional.
Software download
delivery
Upgrade STEP 7 Professional

V12 to
Floating License
6ES7822-1AA03-0YE5
Upgrade from STEP 7 Prof. V12

to STEP 7 Professional V13,
Floating License,
software download
incl. license key1)
6ES7822-1AE03-0YE5

Floating License

Trial License
Article No.
Upgrade from STEP 7

Professional 2006/2010 to
Floating License
6ES7822-1AA03-0XE5
Upgrade from STEP 7

Professional 2006/2010 to
Floating License,
software download
incl. license key1)
6ES7822-1AE03-0XE5

STEP 7 V5.4/V5.5 to
Floating License
6ES7822-1AA03-0XC5

STEP 7 V5.4/V5.5 to
Floating License,
software download
6ES7822-1AE03-0XC5
6ES7822-1AA03-0XC2
6ES7822-1AE03-0XC2
PowerPack STEP 7 Basic V13

Floating License
6ES7822-1AA03-0YC5
Powerpack STEP 7 Basic V13

Floating License,
software downloa
d incl. license key 1)
6ES7822-1AE03-0YC5

STEP 7 Basic V13,
Floating License
6ES7822-0AA03-0YA5
STEP 7 Basic V13,

Floating License,
software download
6ES7822-0AE03-0YA5

6ES7822-1AA03-0XC3
6ES7822-1AE03-0XC3
STEP 7 Basic V13, Trial License
6ES7822-0AA03-0YA7
Upgrade STEP 7 Basic V12

to STEP 7 Basic V13,
Floating License
6ES7822-0AA03-0YE5
Upgrade STEP 7 Basic V12

to STEP 7 Basic V13,
Floating License,
software download
6ES7822-0AE03-0YE5
1)
11/4

Siemens AG 2014

STEP 7 (TIA Portal)
Ordering data
Article No.

For a period of 12 months and
for a fixed price, the customer is
automatically provided with all
upgrades and service packs for
each installed software package.
The contract is automatically
extended by a further year unless
canceled at least 12 weeks prior
to expiration.
Requires the current software
version
The delivery items are combined.

For several contracts,
only 1 package with 1 data medium
set, 1 USB flash drive with the
corresponding number of licenses
and the corresponding number of
COLs will be supplied.
Delivery items to be combined must
be ordered as one item.
STEP 7 Professional V1x
STEP 7 Professional and
STEP 7 Professional
in the TIA Portal
STEP 7 Basic

(Standard Edition)2)
The delivery is implemented
according to the number of ordered
SUS products (e.g. 10 upgrade
packages with 10 DVDs,
10 USB flash drives, etc.)
STEP 7 Professional and STEP 7
Professional in the TIA Portal
STEP 7 Basic
Article No.
Software Update
Service (Compact Edition)2)
6ES7822-1AA00-0YM5
6ES7810-5CC00-0YM2
6ES7822-0AA00-0YM0
Software Update
Service (download)2)
6ES7822-1AA00-0YL5
6ES7810-5CC04-0YE2
6ES7822-0AA00-0YL0
The upgrades and service packs

are available for downloading.
STEP 7 Basic
2)
6ES7822-1AE00-0YY0
6ES7810-5CC04-0YY2
6ES7822-0AE00-0YY0
For more information on the Software Update Service, see page 11/2
11
11/5
Siemens AG 2014

STEP 7 Safety (TIA Portal)
For creating safety-related programs on the STEP 7 operator
interface
For seamless and easy to use integration of safety-related
functions into the standard automation
All the required configuration and programming tools are
integrated into the STEP 7 operator interface and utilize a
common project structure
Overview
Ordering data
Article No.
Software Update
Service (download)1)
Task:
ET 200S, ET 200M, ET 200iSP,
Requirement:

delivery.
STEP 7 Safety Advanced Upgrade
6ES7833-1FA13-0YA5

key download without software and
documentation2);
6ES7833-1FA13-0YH5

6ES7833-1FC00-0YX2

packages with 10 DVDs,
10 USB flash drives, etc.)
version.
11
6ES7833-1FC00-0YY0
The upgrades and service packs

are available for downloading.
Software Update
Service (Compact Edition)1)
Article No.
6ES7833-1FC00-0YM2
The delivery items are combined.

For several contracts,
only 1 package with 1 data medium
set, 1 USB flash drive with the
corresponding number of licenses
and the corresponding number of
COLs will be supplied.
The deliveries that are to be
grouped together must be ordered
as one item.
version.
Distributed Safety V5.4 SP5 and

STEP 7 Safety Advanced V13 for
parallel use; includes software and
documentation on DVD; combo
license for 1 user
6ES7833-1FA13-0YF5
Distributed Safety V5.4 SP5 and

STEP 7 Safety Advanced V13 for
parallel use; combo license for
1 user, license key and documentation for downloading2);
6ES7833-1FA13-0YY5
Upgrade STEP 7 Safety Advanced

V11/V12 to STEP 7 Advanced
Safety V13; includes software and
documentation on DVD; floating
license for 1 user
6ES7833-1FA13-0YE5
Upgrade STEP 7 Safety Advanced

V11/12 to STEP 7 Advanced Safety
V13; floating license for 1 user;
license key and documentation for
downloading2);
6ES7833-1FA13-0YK5
Minimum order quantity: 5 units
11/6
1)
For more information on the software update service, see page 11/2.
2)

Siemens AG 2014

TeleService
Overview
wnVwjGG
p
z^T[WW
wnVwj
kzsG
kzsG
{zGhGpp
z^T[WW
z^TYWW
otp
otp
z^TZWW
nz{^WWW^_[
z^TXYWW
twpVwyvmpi|z
hSGpzku
Teleservice with TS Adapter II
wnVwjGG
wnVwj
{zGhGplGh
G{zGtGnzt
z^T[WW
hS
pzkuS
nzt
z^T[WW
{zGh
plGi
z^TXYWW
z^TX\WW
z^TZWW
otp
otp
z^TZWW
nz{^WWW^_\
z^TXYWW
nz{^WWW^[]
z^TX\WW
hSG
pzkuSGnzt
nz{^WWW^[^
{zGh
plGh
z^TZWW
Teleservice with TS Adapter IE Basic

Teleservice with TS Adapter IE Advanced
For performing remote maintenance:

A programming device/PC with an engineering tool such as
STEP 7, or the TIA Portal can access automation components
(e.g. S7 CPUs) which are connected to the appropriate
adapters over Industrial Ethernet or PROFIBUS.
Comprising the TeleService software and various adapters:
wnVwjGG
z^T[WW
{zGhGpl
hSGpzku
otp
nz{^WWW^[\
z^TZWW
- TS Adapter II for connection to PPI, MPI or PROFIBUS DP

- TS Adapter IE, TS Adapter IE Basic or TS Adapter IE
Advanced for connection to Industrial Ethernet
Additional functions with TS Adapter II:
- Establishing a connection from/to remote plants,
e.g. for calling up process data from an automation system
(PG-to-AS remote coupling).
- Exchanging data between plants
(AS-to-AS remote coupling):
Exchange of process data between two SIMATIC automation
systems.
- Sending a text message:
Sending a text message from a SIMATIC automation system
via a GSM wireless modem.
Teleservice with TS Adapter IE
11/7
11
Siemens AG 2014

TeleService
TS Adapter IE Basic (basic unit)
Additional functions with TS Adapter IE:

- Remote operation of HMI devices:
Access to the HMI device via an Internet browser installed
on the adapter
- Sending e-mails:
Establishing a modem link to a dial-up server (e.g. to an
Internet service provider): A SIMATIC CPU can send e-mails
over an e-mail server that can be accessed in this manner.
- Standard routing:
A modem link can be established to an Internet service
provider for accessing data on the Internet.
Additional functions with TS Adapter IE Advanced:
- Remote connection via the Internet
30 x 100 x 75
Weight, approx.
100 g
Interfaces
Ethernet
To the TS module
Supply voltage, external
24 V DC
Current consumption
With TS module modem
with TS module ISDN
with TS module RS232
with TS module GSM
Typ. 50 mA, max. 80 mA

Switch-on current, max.
240 mA
IP20
Temperature
Operation
TS Adapter II
125 x 110 x 40
Weight, approx.
250 g
Interfaces
to S7/C7
to the PC
to an external modem
to the analog telephone network
to the ISDN telephone network
RS 485 (up to 12 Mbit/s)

USB 1.1 (12 Mbit/s)
RS 232 (up to 115 kbaud)
RJ12
RJ45
Supply voltage, external

or via MPI interface
24 V DC
Current consumption
60 mA (typ.) / 120 mA (max.)
0.7 A; 8 s
IP20
Temperature
Operation
Storage/transport
0 C to +60 C
-40 C to +70 C
RJ45 (10/100 Mbit/s)

Proprietary
(can only be used for TS modules)
Storage
0 C to +60 C
(horizontal installation)
0 C to +40 C (vertical installation)
40 C to +70 C
TS module modem
Dimensions (W x H x D) in mm,
approximately
30 x 100 x 75
Weight, approx.
98 g
ITU transmission standards
V.21, V.22, V.22bis, V.23, V.32,

V.32bis, V.34, V.34x, K56flex, V.90,
V.92
Other features
Error correction and data

compression
a/b interface
Hayes (AT) command set
All data formats
Dial procedures: dual-tone multiplefrequency (DTMF), pulse dialing
TS module ISDN
TS Adapter IE
11
30 x 100 x 75
92 g
125 x 110 x 40
Weight, approx.
Weight, approx.
approx. 370 g
Interfaces
Ethernet
to an external modem
to the analog telephone network
to the ISDN telephone network
RJ45 (10/100 Mbit/s)

RS 232 (up to 115 kbaud)
RJ12
RJ45
Reports
D channel protocols
B channel protocols
Supply voltage, external or

via MPI interface
24 V DC
Current consumption
of the TSA-IE ISDN
typ. 170 mA / max. 230 mA
Current consumption
of the modem TSA IE
typ. 180 mA / max. 240 mA
Other features
DSS1 (Euro-ISDN), 1TR6

V.110 (9600 bit/s, 19200 bit/s,
38400 bit/s)
V.120 (64 Kbit/s)
X.75 (64 Kbit/s)
Multiple subscriber number (MSN)
AT command interpreter
TS module RS232
30 x 100 x 75
Weight, approx.
100 g
0.7 A; 8 s
Operating mode
Full duplex, asynchronous
IP20
Signals
TXD, RXD, DSR, CTS, RTS, DTR,

DCD
Temperature
Operation
Storage/transport
0 C to +60 C
-40 C to +70 C
Data transmission rate
2 400 ... 115 200 bit/s
Message frame
8 data bits (LSB first), no parity bit,

1 stop bit
Rule
according to RS232 standard
Connector
D-sub 9-pin, male (PC COMx)
11/8
Siemens AG 2014

TeleService

TS module GSM
TS Adapter IE Advanced
30 x 100 x 75
Permissible range
Weight, approx.
118 g
Input current
Transmission rate
GPRS Multislot Class 10
- Up to 2 uplinks
- Up to 4 downlinks
Interfaces
SIM interface
Antenna connection
Current consumption, typ.
100 mA
200 mA; incl. TS module GSM
13.4 Kbit/s 27 Kbit/s upload gross

40 Kbit/s 54 Kbit/s download gross
4.3 A
Activation time, max.
3.1 ms
3 V/1.8 V
1 x SMA antenna socket (50 Ohm)
Power loss
Frequency ranges
Quad band:
850, 900, 1800, 1900 MHz
Transmitted output power
2 W at 850 MHz, 900 MHz

1 W at 1800 MHz, 1900 MHz
Power loss, typ.
Industrial Ethernet
General information
Diagnostics display LED
Engineering with
V12 SP1
Rail mounting possible
Yes
Wall/direct mounting possible
Yes
Ordering data
WxHxD
Yes
Weight, approx.
Article No.
USB cable
for parameterizing the TS Adapter II,
it can also be used for programming
the connected devices.
5 m long
TS Adapter IE Basic
6ES7842-0CE00-0YE0
Floating License Upgrade

(from each previous version)
6ES7842-0CE00-0YE4

(requires current software version) 1)
6ES7842-0CA01-0YX2
TS Adapter II modem
6ES7972-0CB35-0XA0
with MPI connection and RS 232;

9-pin, male
6ES7901-0AE00-0XA0
6ES7972-0EB00-0XA0
TS module modem
6ES7972-0MM00-0XA0
TS module ISDN
6ES7972-0MD00-0XA0
TS module RS232
6ES7972-0MS00-0XA0
TS module GSM
6GK7972-0MG00-0XA0
6ES7972-0EA00-0XA0
6ES7972-0CC35-0XA0
with Ethernet connection RJ45

(10/100 Mbit/s) and RS 232;
9-pin, male
6ES7972-0ED00-0XA0
6ES7972-0SE00-7AA0
for mounting the

TS Adapter IE Basic on S7-300
mounting rail, width 60 mm
6ES7972-0EM00-0XA0
11
for accessing automation

components via the Internet
(GSM, DLS, WAN)
S7 mounting rail adapter
with MPI connection and RS 232;

9-pin, male
with Ethernet connection RJ45

(10/100 Mbit/s) and RS 232; 9-pin,
male
225 g
Basic unit
Floating License
TS Adapter IE ISDN
55 x 117 x 75 mm
Article No.
Task: Remote maintenance by

means of wired or radio network
Target system: SIMATIC S7-200,
SIMATIC S7-300, SIMATIC S7-400,
SIMATIC C7
Requirement: TS Adapter
(STEP 7 not required)
Delivery package: on CD; German,
English, French, Spanish, Italian;
with electronic documentation
TS Adapter IE modem
Dimensions
TeleService, Version 6.1
TS Adapter II ISDN
RUN LED, ERROR LED, MAINT LED,

LINK LED, ONLINE LED, VPN LED,
RX/TX LED
Weight
Supply voltage
24 V DC
3x Ethernet (RJ45), 100 Mbit
Insulation
Insulation tested at
Installation
2.4 W
Interfaces
status information

+19.2 V ... +28.8 V
6ES7998-8XC01-8YE0

multilingual: LOGO!, SIMADYN,
6ES7998-8XC01-8YE2

1)
For more information on the software update service, see page 11/2.
11/9
Siemens AG 2014

Options for engineering and drive technology
PID Professional
Overview
Ordering data
Article No.
PID Professional for TIA Portal

(engineering software)
Task: Function blocks and editors
for PID controllers
Requirement: STEP 7 V12 SP1
and higher
Delivery package: on CD
Full version incl. floating license for
the engineering and single license
for runtime
6ES7860-1XA02-0XA5
Trial version incl. 21-day test license
6ES7860-1XA02-0XT7
Upgrade License from Standard

PID Control or Modular PID Control
V5.1 to PID Professional for
TIA Portal
6ES7860-1XA02-0XE5
Licenses
Type of delivery:
on USB stick/by download
PID Professional combines the two option packages Modular

PID Control and Standard PID Control in the TIA Portal.
Permits the simple integration of continuous PID controllers,
pulse controllers and step controllers in the application
program.
Can be used for simple to complex closed-loop control tasks
in SIMATIC S7-300 (CPU 313 or higher), S7-400, and WinAC.
Tuning functionality by means of PID Self-Tuner
(part of STEP 7 as of V11 SP1).
Reduces engineering costs thanks to time-saving parameterization and optimization of the controller.
11
11/10
Single license
(certificate of license)
for runtime; per CPU (all versions)
6ES7860-1XA01-0XB0
Floating license
for the engineering as of V11;
Download (e-mail address
required for delivery)1)
6ES7860-1XA01-0XH5
Upgrade (Combo License) as of

V11; Download (e-mail address
required for delivery)1)
6ES7860-1XA01-0XK5
1)

Siemens AG 2014

S7-Technology
Overview
Option package for creating motion control tasks for
CPU 31xT-2 DP and CPU 317TF-2 DP
Optimal embedding in the automation world thanks to total
integration in the STEP 7 tools
Programming in the standard SIMATIC programming
languages LAD, FBD and STL
Additional Engineering Tools such as S7-SCL or S7-GRAPH
can be used
Ordering data
Article No.
S7-Technology V4.2
Task:
Option package for configuring and
programming technology tasks with
the SIMATIC S7 CPU 31xT-2 DP
and SIMATIC S7 CPU 317TF-2 DP
Requirement:
Delivery form:
on DVD;
incl. documentation for
CPU 31xT-2 DP, CPU 317TF-2 DP
(also on DVD)
Floating license
6ES7864-1CC42-0YA5
Floating License for 1 user,

license key download without
software or documentation1);
6ES7864-1CC42-0XH5
Upgrade to V4.2
6ES7864-1CC42-0YE5
Trial License
6ES7864-1CC42-0YA7
1)

11
11/11
Siemens AG 2014

Easy Motion Control
Overview
Low-priced package for simple, controlled positioning and
simple geared synchronous motion
For use with any standard variable-speed drive, such as
frequency converter or servo drive
For incremental and absolute encoders
Supported hardware:
Easy Motion Control is runnable on the following CPUs:
S7-300.
S7-400.
WinAC.
ET 200S.
ET 200pro.
Supported modules for the measuring of actual values:
CPU 314C (FW version 2.0 of the CPU or higher).
ET 200S 1 Count 5V/500 kHz.
ET 200S 1 Count 24V/100kHz.
ET 200S 1SSI.
SM 338.
FM 350-1, FM 450-1.
SIMODRIVE sensor with PROFIBUS DP.
IM 174.
Other modules for measuring actual values (using free driver).
Supported modules for setpoint output:

ET 200S 2AO U.
SM 332.
SM 432.
IM 174.
Other modules for setpoint output (using free driver).
Supported drives using PROFIBUS DP:
Micromaster 4.
SINAMICS G120.
SINAMICS S120.
Storage space requirements

Required main storage in byte
11
Block
Required main storage

per block
Additional main storage required per instance
MC_Init
1086
MC_MoveAbsolute
3924
112
MC_MoveRelative
2982
110
MC_MoveJog
3110
110
MC_Home
2886
104
MC_StopMotion
1114
70
MC_Control
1756
58
MC_Simulation
410
64
MC_GearIn
3476
128
Input driver
1416 ... 2654
76 ... 128
Output driver
384 ... 1242
52 ... 68
Axis data block
294
Ordering data
Article No.
Floating license for downloading
by e-mail, valid for V11 or higher
(e-mail address required for
delivery1) )
Easy Motion Control V2.1

Requirement: STEP 7 V5.3 SP2
Delivery package: Software and
documentation in 6 languages
on CD
Floating License
6ES7864-0AC01-0YX0
Requirement: STEP 7 V12 SP1

or higher
Delivery package: Software and
documentation in 6 languages
on CD
21-day trial license
6ES7864-2XA02-0XT7
Floating license and single license

(Runtime)
6ES7864-2XA02-0XA5
6ES7864-2XA01-0XH5
Easy Motion Control Runtime

License
Type of delivery: CoL for one
Runtime single license (valid for
Easy Motion Control V2.x and V11
or higher), without software or
documentation
Easy Motion Control

for TIA Portal
11/12
Article No.
1)
6ES7864-0AF01-0YX0

Siemens AG 2014

Software for joint tasks in the maintenance sector
SIMATIC PDM
Overview
SIMATIC PCS 7 engineering station
with SIMATIC PDM
Device on
the workbench
Industrial Ethernet
S7-400
S7-400
PROFINET
ET 200M
(also with
HART modules)
PROFIBUS PA
IE/PB Link PN IO
+ DP/PA coupler
SIMOCODE
PROFIBUS DP
HART protocol
RS 232/RS 485
Field devices
SIMOCODE
ET 200iSP
HART
multiplexer
Possible connection point of a

PG/PC with SIMATIC PDM
(stand-alone operation)
G_PCS7_XX_00200
FF H1
ET 200M
HART
PROFIBUS PA
FF link
HART
PA link
Configuration options with SIMATIC PDM
SIMATIC PDM (Process Device Manager) is a universal, vendorindependent tool for the configuration, parameter assignment,
commissioning, diagnostics and servicing of intelligent field
devices (sensors and actuators) and field components (remote
I/Os, multiplexers, control-room devices, compact controllers),
which in the following sections will be referred to simply as
devices.
Using one software, SIMATIC PDM enables the processing of
more than 2 500 devices from Siemens and over 200 vendors
worldwide on one homogeneous user interface.
The user interface satisfies the requirements of the
VDI/VDE GMA 2187 and IEC 65/349/CD directives. Parameters
and functions for all supported devices are displayed in a
consistent and uniform fashion independent of their communications interface. Even complex devices with several hundred
parameters can be represented clearly and processed quickly.
Using SIMATIC PDM it is very easy to navigate in highly complex
stations such as remote I/Os and even connected field devices.
When used in SIMATIC PCS 7, SIMATIC PDM is integrated in the

asset management of the process control system. You can
change directly to the SIMATIC PDM views from the diagnostics
faceplates in the Maintenance Station.
The Process Device Manager provides more detailed information for all devices described by means of an Electronic
Device Description (EDD), e.g.:
Detailed diagnostics information (manufacturer information,
information on error diagnostics and troubleshooting, further
documentation)
Results of internal condition monitoring functions
Status information (e.g. local configuration changes)
Information on changes (audit trail report)
Parameter information
From the viewpoint of device integration, SIMATIC PDM is the

most powerful open device manager available in the world.
Devices which previously were not supported can be easily
integrated in SIMATIC PDM at any time by importing their device
descriptions (EDD). This provides security for your investment
and saves you investment costs, training expenses and followup costs.
SIMATIC PDM supports the operative system management in
particular through:
Uniform presentation and operation of devices
Uniform representation of diagnostics information
Indicators for preventive maintenance and servicing
Detection of changes in the project and device
Increasing the operational reliability
Reducing the investment, operating and maintenance costs
Forwarding of device information to higher-level Maintenance
Stations
11/13
11
Siemens AG 2014

SIMATIC PDM
SIMATIC PDM V6.1
SIMATIC PDM V8.1
Hardware
PG/PC/notebook with processor corresponding

to operating system requirements
PG/PC/notebook with processor corresponding to

operating system requirements
Operating systems (alternative)
Microsoft Windows XP Professional SP3, 32-bit

Microsoft Windows Server 2003 R2 SP2, 32-bit,
Standard Edition
Integration in STEP 7/PCS 7
SIMATIC PCS 7 V8.0+SP1 (SIMATIC PCS 7 V8.0

without PROFINET communication)
STEP 7 V5.5+SP3 (STEP 7 V5.5+SP2 without
PROFINET communication)
Ordering data
STEP 7 V5.3+SP2
STEP 7 V5.4+SP5
STEP 7 V5.5 or V5.5+SP1/SP2/SP3
SIMATIC PCS 7 V6.1+SP4
SIMATIC PCS 7 V7.1 or V7.1+SP1/SP2/SP3
SIMATIC PCS 7 V8.0 or V8.0+SP1
Windows XP Professional SP3 (32-bit)

Windows Server 2003 SP2 Standard Edition (32-bit)
Windows Server 2003 R2 SP2 Standard Edition (32-bit)
Windows 7 Professional/Ultimate/Enterprise SP1
(32-bit/64-bit)
Windows Server 2008 SP2 Standard Edition (32-bit)
Windows Server 2008 R2 SP1 Standard Edition (64-bit)
Article No.
Article No.
SIMATIC PDM V8.1

SIMATIC PDM stand-alone
product packages
Basic configuration for individual

product packages
Minimum configuration
SIMATIC PDM Basic V8.1

Product package for operation and
configuration of field devices and
components; communication via
PROFIBUS DP/PA, HART (modem,
RS 232, PROFIBUS/PROFINET),
Modbus, Ethernet or PROFINET,
including 4 TAGs
SIMATIC PDM Single Point V8.1

for operation and configuration of
one field device; communication via
PROFIBUS DP/PA, HART (modem,
RS 232, PROFIBUS/PROFINET),
Modbus, Ethernet or PROFINET,
including 1 TAG
cannot be expanded with respect
to functions or with TAG
option/PowerPack
11
6 languages (English, German,

French, Italian, Spanish, Chinese),
software class A, runs with
Windows XP Professional 32-bit,
Windows 7 Ultimate 32/64-bit,
Windows Server 2003 R2 Standard
32-bit, or Windows Server 2008 R2
Standard 64-bit, floating license for
1 user
Delivery form package
SIMATIC PDM software and
device library on DVD, license key
on USB stick, certificate of license
Delivery form online
Software image download
(SIMATIC PDM and device
library), license key download,
online certificate of license
Note: E-mail address required!
11/14
6ES7658-3HA18-0YA5
6ES7658-3HA18-0YH5

1 user
6ES7658-3AB18-0YA5
6ES7658-3AB18-0YH5
Siemens AG 2014

SIMATIC PDM
Ordering data
Article No.
Article No.
Application-specific
configuration for mobile service
Optional product components for

SIMATIC PDM V8.1
SIMATIC PDM Service V8.1

Product package for stand-alone
user in service, with
SIMATIC PDM Basic
100 TAGs
SIMATIC PDM Extended V8.1

1 user
License key on USB stick,
certificate of license
License key download, online

1 user
6ES7658-3JD18-0YA5
6ES7658-3JD18-0YH5
Application-specific configuration
for integration in SIMATIC S7
configuration environment
SIMATIC PDM S7 V8.1
Product package for use in a
SIMATIC S7 engineering
environment, with
- SIMATIC PDM Basic and
Extended
- Integration in STEP 7/PCS 7
- 100 TAGs
1 user
Note:
SIMATIC PDM S7 V8.1 requires the
installation of STEP 7
V5.5+SP2/SP3! PROFINET communication is supported as of STEP 7
V5.5+SP3.
6ES7658-3KD18-0YA5
6ES7658-3KD18-0YH5
SIMATIC PDM Integration in

STEP 7/SIMATIC PCS 7 V8.1
only required for integration of
SIMATIC PDM into HW Config
1 user
SIMATIC PDM Routing V8.1
1 user
SIMATIC PDM Communication
FOUNDATION Fieldbus V8.1
1 user
(without SIMATIC PCS 7 Software
Media Package)
License key USB stick,
Media Package)
License key download,
6ES7658-3NX18-2YB5
6ES7658-3NX18-2YH5
6ES7658-3BX18-2YB5
6ES7658-3BX18-2YH5
6ES7658-3CX18-2YB5
11
6ES7658-3CX18-2YH5
6ES7658-3QX18-2YB5
6ES7658-3QX18-2YH5
11/15
Siemens AG 2014

SIMATIC PDM
Ordering data
SIMATIC PDM HART Server V8.1
1 user
Media Package)
License key USB stick, certificate
of license
Media Package)
SIMATIC PDM Command
Interface V8.1
1 user
Media Package)
License key USB stick,
Article No.
SIMATIC PDM stand-alone

product packages
Minimum configuration
6ES7658-3EX18-2YB5
11
6ES7658-3EX18-2YH5

Windows XP Professional/ Server
2003, floating license for 1 user
Basic configuration for individual

product packages
6ES7658-3SX18-2YB5

Product package for operator input
and configuration of field devices
and components, communication
via PROFIBUS DP/PA, HART
(modem, RS 232, PROFIBUS),
SIREC bus, SIPART DR, Modbus or
Ethernet, including 4 TAGs
6ES7658-3AX16-0YA5

SIMATIC PDM software and device
library on CD/DVD, license key on
USB stick, certificate of license
configuration for mobile service
6ES7658-3XC00-2YB5
6ES7658-3XD00-2YB5
6ES7658-3XE00-2YB5
6ES7658-3XC00-2YH5
6ES7658-3XD00-2YH5
6ES7658-3XE00-2YH5
6ES7658-3GX18-0YT8

32-bit or Windows Server 2008 R2
Standard 64-bit
library on DVD
11/16
6ES7658-3HX16-0YA5

Demonstration software
SIMATIC PDM Demo V8.1
Storage functions, export/import
and advanced functionality
disabled; communication functions
restricted
SIMATIC PDM Single Point V6.1

for operation and configuration of
one field device; communication via
PROFIBUS DP/PA, HART modem or
Modbus, including 1 TAG
cannot be expanded with respect
to functions or with
TAG option/PowerPack
SIMATIC PDM TAGs

for SIMATIC PDM V8.1
SIMATIC PDM TAGs
TAG licenses for expanding
SIMATIC PDM product packages
V7.0 or higher, can be accumulated, software class A,
floating license for 1 user
- 10 TAGs
- 100 TAGs
- 1 000 TAGs
- 10 TAGs
- 100 TAGs
- 1 000 TAGs
Article No.
SIMATIC PDM V6.1
SIMATIC PDM Service V6.1

Product package for stand-alone
user in service, with
128 TAGs
6ES7658-3JX16-0YA5
Siemens AG 2014

SIMATIC PDM
Ordering data
Article No.
Article No.
SIMATIC PDM system-integrated

product packages
TAG options/PowerPacks for

SIMATIC PDM V6.1
configuration for integration
in SIMATIC S7 configuration
environment
SIMATIC PDM TAG option

for TAG expansion, additive to
SIMATIC PDM S7 V6.1

Product package for use in a
SIMATIC S7 configuration
environment, with
Integration in STEP 7/PCS 7
128 TAGs
6ES7658-3KX16-0YA5

Up to 128 TAGs
Up to 512 TAGs
Up to 1 024TAGs
Up to 2 048 TAGs

Software class A, runs with

Windows XP Professional/Server
Optional product components

for SIMATIC PDM V6.1
6ES7658-3BX16-2YB5

6ES7658-3XB16-2YD5
6ES7658-3XC16-2YD5
6ES7658-3XD16-2YD5
6ES7658-3XH16-2YD5
Demonstration software
6ES7658-3CX16-2YB5
6ES7658-3GX16-0YC8

2003
Media Package)
library on CD/DVD

SIMATIC PDM Communication via
standard HART multiplexer V6.1
Windows XP Professional/
Server 2003, floating license
for 1 user

128 TAGs to 512 TAGs
512 TAGs to 1 024 TAGs
1 024 TAGs to 2 048 TAGs
2 048 TAGs to unlimited TAGs
SIMATIC PDM Demo V6.1

Without online communication and
storage functionality

SIMATIC PDM Routing V6.1
6ES7658-3XA16-2YB5
6ES7658-3XB16-2YB5
6ES7658-3XC16-2YB5
6ES7658-3XD16-2YB5
SIMATIC PDM PowerPack

for TAG expansion, for any
SIMATIC PDM V6.1 product
packages

SIMATIC PDM integration in

STEP 7/SIMATIC PCS 7 V6.1
only required for integration of
SIMATIC PDM into HW Config
Software class A, runs with

6ES7658-3EX16-2YB5
11

11/17
Siemens AG 2014

Notes
11
11/18
Siemens AG 2014
12
12/2
12/2
Programming devices
Field PG M4
12/6
12/6
12/8
12/9
12/11
12/13
12/15
Communications software
SOFTNET for PROFIBUS
HARDNET-IE S7-REDCONNECT
SOFTNET for Industrial Ethernet
SOFTNET PN IO
OPC server for Industrial Ethernet
SNMP OPC server
Brochures
printmaterial
Siemens AG 2014

Programming devices
Field PG M4
Overview
The mobile, industry-standard programming device with a
powerful, third-generation Intel Core i processor
Optimal for commissioning, service and maintenance of
automation systems.
Industrial notebook with wireless technology, large 15.6"
widescreen display, long battery life, high-speed RAM, and
integral data backup concept.
Complete with all commonly used interfaces for industrial
applications.
SIMATIC Field PG M4
SIMATIC Field PG M4
Interfaces
General features
Design
Notebook
Processor
Intel Celeron 1020E processor,

2.2 GHz, 2 MB cache
Intel Core i5-3320M processor,
up to 3.3 GHz, 3 MB cache
Intel Core i7-3520M processor,
up to 3.6 GHz, 4 MB cache
PROFIBUS DP/MPI
CP 5711-compatible, 9.6 Kbit/s to

12 Mbit/s, 9-pin sub D socket; can also
be used in virtual operating systems
COM 1
V.24/TTY (for SIMATIC S5; TTY as

optional version); over supplied
adapter on 9-pin sub-D male
connector
SIMATIC Memory Card
Programming interface for SIMATIC

Memory Card and S5 memory module
(S5 EPROM module as optional
equipment variant)
SIMATIC Micro Memory Card
Interface for SIMATIC Micro Memory

Card
Media Card Reader
Interface for
SMC (SIMATIC Memory Card)
SD/SHC
xD-Picture Card
MS Pro
RAM
Expandable up to 16 GB DDR3
SODIMM
Free slots for expansions
1 x PC Card (Type I, Type II)

1 x Express Card (34 and 54 mm)
Graphics
Intel HD4000 graphics with a

resolution of 2560 x 1600 pixels
for i5 and i7 processors
Display
15.6" widescreen display, 16:9 format

1366 x 768 (HD ready)
1920 x 1080 (full HD)
Speakers
Built-in stereo speakers
Ethernet
2 x Gigabit Ethernet (RJ45)
Pointing device
Touchpad with 2 mouse buttons
USB
Operating system
Windows XP Prof. SP3 32 Bit

Windows 7 Ultimate SP1 64 Bit
Dual boot (Windows XP Prof. SP3 and
Windows 7 Ultimate SP1 64 Bit)
2 x USB 3.0, max.1 high current

(900 mA);
under Windows XP as USB 2.0
Wide-range power supply unit

100-240 V AC, 50-60 Hz,
high-power 8800 mAh lithium-ion
battery (running time of more than
5 hours; discharge time of more than
5 months when not in use)
Power supply
12
Warranty conditions
24 months for hardware components

(6 months for battery1)
Drives
Hard disk
Optical drive
12/2
Easily to replace hard drive

(250 or 500 GB HDD) or super-fast
solid-state drive (300 or 480 GB SSD)
Multistandard DVD+-R/+-RW
2 x USB 2.0, for High Speed USB;

max. 2 High Current (500 mA) or 1 A ;
of which 1 USB interface with charging
function for mobile devices in power
off mode
PC Card (PCMCIA)/Express Card/54 1 x PC Card (Type I, Type II)
1 x Express Card (34 and 54 mm)
DVI-I
1 interface for external monitor

(VGA monitors can be operated
with a DVI/VGA adapter)
DPP (Display Port)
Interface for external monitor,

max. resolution: 2560 x 1600 pixels
WLAN2)
Integrated, IEEE802.11 a, b, g, n
Headphones/microphone
Connection in each case for 3.5 mm

stereo jack
Siemens AG 2014

Programming devices
Field PG M4

SIMATIC Field PG M4
SIMATIC Field PG M4
Ambient conditions
Temperature
Degree of protection in accordance Front IP30 when covers closed

with IEC 60529
Operation3)
Vibrations
Operation
Transport
Resistance to shock
Operation
Storage/transport
Tested in accordance with

DIN IEC 60068-2-6
10 to 58 Hz: Amplitude 0.0375 mm,
58 to 500 Hz: Acceleration 4.9 m/s2
5 to 9 Hz: Amplitude 3.5 mm;
9 to 500 Hz: Acceleration 9.8 m/s2
Storage/transport
Tested in accordance with

IEC 60068-2-27, IEC 60068-2-29
Half-sine 50 m/s2, 30 ms, 100 shocks
Half-sine 250 m/s2, 6 ms, 1000 shocks
Storage/transport
Electromagnetic compatibility (EMC)

Radiated interference
EN 61000-6-3:2007, EN 61000-3-2
Class D and EN 61000-3-3
2 kV; (according to IEC 61000-4-4;
Immunity to conducted interburst)
ference on the supply lines
surge sym./line to line)
surge sym./line to ground)
Noise immunity on signal lines
burst; length < 30 m)
burst; length > 30 m)
surge sym./line to ground;
length > 30 m)
4 kV discharge on contact
Immunity to static discharge
(in accordance with IEC 61000-4-2:
ESD)
8 kV discharge to air (in accordance
with IEC 61000-4-2: ESD)
Immunity to high frequency radio 10 V (with modem operation max. 3 V),
with 80% amplitude modulation
interference
with 1 kHz,
10 kHz ... 80 MHz
(in accordance with IEC 61000-4-6)
10 V/m (with modem operation max.
3 V/m), with 80% amplitude modulation
with 1 kHz,
80 MHz ... 1000 MHz and
1.4 GHz ... 2 GHz
1 V/m, with 80% amplitude modulation
with 1 kHz,
2.0 GHz ... 2.7 GHz 1 V/m
100 A/m; 50/60 Hz
Immunity to magnetic fields
Relative humidity
Operation
Tested in accordance
with IEC 60068-2-1, IEC 60068-2-2
+ 5 C ... + 40 C max. 10C/h
(no condensation)
- 20 C ... + 60 C max. 20C/h
(no condensation)
Tested according to IEC 60068-2-78,
IEC 60068-2-30, IEC 60068-2-14
5 % ... 80% at 25C/h
(no condensation)
5 % ... 95% at 25C/h
(no condensation)
Safety
Safety class
Safety class II according to IEC 61140
Safety regulations
According to VDE 0805 in conformance with IEC 60950-1:2006

IEC 60950-1:2005
EN 60950-1:2006 with change
EN 60950-1:2006/A11:2009
DIN EN 60950-1(VDE0805-1):200611 with change DIN EN 60950-1/A11
(VDE0805-1/A11):2009-11
UL 60950-1 Second Edition
CAN/CSA-C22.2 No. 60950-1-07
Second Edition
Dimensions and weights

385 x 53 x 275
Weight, approx.
Without battery approx. 3 kg

With battery approx. 3.4 kg
1)
The capacity of the battery decreases for technological reasons with each
charging/discharging operation and also as the result of being stored at
excessively high or low temperatures. The running time per charge
decreases therefore over the course of time. With normal use, the battery
can be charged and discharged over a period of six months from when the
Field PG is purchased. Loss of capacity is not covered by the warranty. For
the battery's operation we grant a warranty of six months. We recommend
replacing the battery with an original Siemens battery at the end of these
six months if there is a significant drop in performance.
2)
Integral WLAN with antennas specially designed for the Field PG M4.
The integrated wireless LAN is approved for operation in Europe (CE),
USA (FCC), Canada (IC), Korea (KCC) and China (CCC).
For operation outside these countries, the relevant national regulations
must be observed.
3)
Battery charging and CD/DVD writing is only possible at temperatures up

to 35 C
12
12/3
Siemens AG 2014

Programming devices
Field PG M4
Ordering data
SIMATIC Field PG M4 Standard
programming device
Article No.
Article No.
6ES7716- 0 A A 7 7 -0 7 7 3
Intel Celeron 1020E processor,

2 MB cache, 2.2 GHz, 250 GB HDD
SATA hard disk, multistandard
DVD+-R/+-RW drive, Intel HD
graphics;
without SIMATIC S5 interface,
without SIMATIC S5 EPROMMER
Display
15.6" display, HD ready
(1366 x 768)
15.6" display, full HD
(1920 x 1080)
Keyboard and power cable
(essential)
Keyboard: QWERTY (& German);
power supply cord: Germany,
France, The Netherlands, Spain,
Belgium, Austria, Sweden, Finland
power supply cord: United
Kingdom
power supply cord: Switzerland
power supply cord: USA
power supply cord: Italy
power supply cord: China;
approval for China (CCC)
Keyboard: AZERTY; power supply
cord: Germany, France, The
Netherlands, Spain, Belgium,
Austria, Sweden, Finland
cord: Switzerland
12
Operating system
Windows 7 Ultimate, SP1, 64-bit
(Eng., Fr., Ger., Sp., It.,
selectable);
STEP 5 and STEP 7 Micro/Win not
pre-installed. STEP 5 cannot run
on Windows 7;
installed main memory:
1 x 8 GB DDR3 RAM
selectable);
on Windows 7;
2 x 8 GB DDR3 RAM
SIMATIC software licenses
Trial license:
STEP 7 Prof. Combo (STEP 7 Prof.
V13 and STEP 7 Prof. 2010),
WinCC Adv. Combo (WinCC V13
and WinCC flexible 2008),
STEP 7 Micro/Win V4.1
License:
12/4
0
1
Programming device Field PG M4

Premium and Premium Plus
Field PG M4 Premium:
Intel Core i5 3320M processor,
3 MB cache, 2.6 GHz (max. 3.3
GHz with turbo boost technology),
multistandard DVD+-R/+-RW drive,
Intel HD4000 graphics card
Field PG M4 Premium Plus:

Intel Core i7 3520M processor,
4 MB cache, 2.9 GHz (max. 3.6
GHz with turbo boost technology),
multistandard DVD+-R/+-RW drive,
Intel HD4000 graphics card
Hard disk
500 GB HDD SATA (for Field PG
M4 Premium and Premium Plus)
300 GB SSD SATA (for Field PG
480 GB SSD SATA (for Field PG
SIMATIC S5 interface
Without S5 interface,
without S5 EPROMMER
With S5 interface,
with S5 EPROMMER incl. S5 PLC
cable and EPROM adapter
2
3
4
Display
15.6" display, HD ready
(1366 x 768)
15.6" display, full HD
(1920 x 1080)
6ES7716- 7 7 7 7 7 -0 7 7 3
Keyboard and power cable

(essential)
power supply cord: Germany,
France, The Netherlands, Spain,
Belgium, Austria, Sweden, Finland
power supply cord: United
Kingdom
power supply cord: Switzerland
power supply cord: USA
power supply cord: Italy
power supply cord: China;
approval for China (CCC)
cord: Germany, France, The
Netherlands, Spain, Belgium,
Austria, Sweden, Finland
cord: Switzerland
B
C
D
A
B
0
1
2
3
4
5
Siemens AG 2014

Programming devices
Field PG M4
Ordering data
Programming device Field PG M4
Premium and Premium Plus
Article No.
Article No.
6ES7716- 7 7 7 7 7 -0 7 7 3
Operating system
Windows XP Professional SP3
32-bit MUI (Eng., Ger., Fr., It., Sp.);
installed RAM:
1 x 4 GB DDR3 RAM
STEP 7 Professional V13 and
WinCC Advanced V13 not preinstalled.
selectable);
on Windows 7;
1 x 8 GB DDR3 RAM
selectable);
on Windows 7;
2 x 8 GB DDR3 RAM
Dual-boot:
64-bit and Windows 7 Ultimate
SP1 64-Bit;
1 x 8 GB DDR3 RAM
Dual-boot:
64-bit and Windows 7 Ultimate
SP1 64-Bit;
2 x 8 GB DDR3 RAM
Spare battery
(lithium ion, 8.8 Ah)1)
6ES7798-0AA07-0XA0
For Field PG M4 only

A
MPI cable
6ES7901-0BF00-0AA0
For connecting a PG and

SIMATIC S7 via MPI; 5 m
S5 EPROM programming adapter
6ES7798-0CA00-0XA0
For SIMATIC S5 EPROM

programming using the Field PG
S5 PLC cable
6ES5734-2BF00
For connecting programming

devices to SIMATIC S5 PLCs, 5 m
Replaceable hard disk kit
6ES7791-2BA01-0AA0
Replaceable hard disk

500 GB serial ATA;
with protective pocket and
Torx screwdriver;
for Field PG M3/M4 only
Replaceable SSD kit
Replaceable SSD 300 GB serial

ATA; with protective pocket and
Torx screwdriver;
for Field PG M3/M4 only
6ES7791-2BA20-0AA0
Replaceable SSD 480 GB serial

ATA; with protective pocket and
Torx screwdriver;
for Field PG M3/M4
6ES7791-2BA21-0AA0
Adapter serial ATA to USB 3.0
6ES7790-1AA01-0AA0
For using the removable hard disk

in the hard disk kit as an external
hard disk (only for Field PG M4)
SIMATIC software licenses

Trial license:
License:
License:
STEP 7-Micro/Win V4.1,
STEP 5;
incl. MPI cable
Rucksack for Field PG M4
6ES7798-0DA02-0XA0
SIMATIC IPC Image & Partition

Creator V3.3
6ES7648-6AA03-3YA0
Software tool for very easy

preventive data backup and
efficient partition management on
SIMATIC IPCs

packages with 10 DVDs, 10 USB
flash drives, etc.)
WinCC Advanced
6ES7810-5CC04-0YE2
6AV6613-0AA00-0AL0
12
Accessories
Memory expansion
4 GB RAM
6ES7648-2AH60-0KA0
8 GB RAM
6ES7648-2AH70-0KA0
AC/DC external power supply unit
6ES7798-0GA03-0XA0
For Field PG M4 only

Power cord (length 3 m)
For Field PG M2/M4 only
For Germany, France, The Netherlands, Spain, Belgium, Austria,
Sweden, Finland
6ES7900-5AA00-0XA0
For Great Britain
6ES7900-5BA00-0XA0
For Switzerland
6ES7900-5CA00-0XA0
For the USA
6ES7900-5DA00-0XA0
For Italy
6ES7900-5EA00-0XA0
For China
6ES7900-5FA00-0XA0
1)
The capacity of the battery decreases for technological reasons with each
charging/discharging cycle and also as the result of being stored at excessively high or low temperatures. The running time per charge decreases
therefore over the course of time. With normal use, the battery can be
charged and discharged over a period of six months from when the Field
PG is purchased. Loss of capacity is not covered by the warranty. For the
battery's operation we grant a warranty of six months. We recommend
replacing the battery with an original Siemens battery at the end of these
six months if there is a significant drop in performance.
2)
For more information on the Software Update Service, see page 11/2.
12/5
Siemens AG 2014

Overview
Ordering data
Article No.
SOFTNET-PB S7
PC/IPC with
CP 5612/
CP 5622/CP 5711
and SOFTNET for
PROFIBUS
Software for S7 communication, incl.

FDL protocol with OPC server and
configuration tool, runtime software,
software and electronic manual on
DVD-ROM, license key on USB stick,
Class A; for CP 5612 (Win 7 and
higher), CP 5622 (Win 7 and higher),
CP 5711
SOFTNET-PB S7 V12
PROFIBUS
S7-1200 with
CM 1243-5
S7-300 with
CP 342-5
'36
)06
23&
3*23
Software for connecting PCs/programming devices and

notebooks to programmable controllers
- PROFIBUS DP master Class 1 and 2 with acyclic expansions
- PROFIBUS DP slave
- S7 communication
- Open communication (SEND/RECEIVE) based on the
FDL interface
The corresponding OPC servers are included in the scope of
supply of the respective communication software
Performance data
CP 5612/CP 5622/CP 5711
Mono protocol mode

Number of connectable DP slaves max. 60
12
Number of FDL tasks waiting
max. 50
Number of PG/OP and

S7 connections
DP master
DP slave
max. 8
12/6
DP-V0, DP-V1 with SOFTNET-PB DP

DP-V0, DP-V1 with SOFTNET-PB DP
slave
6GK1704-5CW00-3AL0
Upgrade
From Edition 2006 to SOFTNET-S7
Edition 2008 or V12
From V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-S7 Edition 2008 or V12
66
6GK1704-5CW12-0AA0

For 1 year, with automatic extension;
requirement: Current software
version
*B,.B;;B
'30
S7-400 with
CP 443-5 Extended
G_IK10_XX_50039
S7-1500 with
CM 1542-5
For 32/64-bit: Windows 7

Professional/Ultimate; for 32/64-bit:
Windows 8 Pro; for 64-bit:
Windows 2008 Server R2;
for 64-bit: Windows 2012 Server;
German/English
Single License for one installation
6GK1704-5CW00-3AE0
6GK1704-5CW00-3AE1
SOFTNET-PB DP
Software for DP protocol
(master Class 1 and 2), incl.
FDL protocol with OPC server and
configuration tool; runtime software,
software and electronic manual on
DVD-ROM, license key on USB stick;
for CP 5612 (Win 7 and higher),
CP 5622 (Win 7 and higher),
CP 5711
SOFTNET-PB DP V12
German/English
6GK1704-5DW12-0AA0
6GK1704-5DW00-3AL0

version
Upgrade
From Edition 2006 to SOFTNET-DP
Edition 2008 or V12
From V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Edition 2008 or V12
6GK1704-5DW00-3AE0
6GK1704-5DW00-3AE1
Siemens AG 2014

Ordering data
Article No.
Article No.
SOFTNET-PB DP slave
Software for DP slave, with

OPC server and configuration
tool,single license for one installation, runtime software, software
and electronic manual on DVD-ROM,
license key on USB stick, Class A;
for CP 5612 (Win 7 and higher),
CP 5622 (Win 7 and higher),
CP 5711

version
Upgrade
From Edition 2006 to SOFTNET-DP
Slave Edition 2008 or V12
From V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Slave Edition 2008 or
V12
SOFTNET-PB DP slave V12

German/English
6GK1704-5SW00-3AL0
6GK1704-5SW00-3AE0
6GK1704-5SW00-3AE1
6GK1704-5SW12-0AA0
Note
The Windows XP software version is still available for older CPs;
see the Industry Mall:
http://www.siemens.com/industrymall.
12
12/7
Siemens AG 2014

Overview
ISO
H CPU
in single mode
ET 200M
System configuration for S7-REDCONNECT
Ordering data
OPC
PG/OP S7/S5
Article No.
CP 1613 A2 communications
processor
V12
Professional/Ultimate;
for 64-bit: Windows 2008 Server R2
for 32/64-bit Windows 8 Pro;
for Windows Server 2012
German/English
6GK1716-0HB12-0AA0
6GK1716-0HB00-3AL0
For one year with automatic

extension;
requirement: current software
version
6GK1716-0HB00-3AE0
6GK1716-0HB00-3AE1
For CP 1613 A2, CP 1623, CP 1628

PowerPack
For expansion from HARDNET-IE S7
to HARDNET-IE S7-REDCONNECT /
from S7-1613 to S7 REDCONNECT,
Single License for one installation,
runtime software, software and
electronic manual on CD-ROM,
IT
For connecting PCs over redundant Industrial Ethernet to the

SIMATIC S7-400H
Protected from communication failures arising from a fault in
the double bus or in redundant rings
For redundant Layer 2 or Layer 3 Industrial Ethernet
Can also be implemented in non-redundant networks
No additional programming overhead for the PC and
in H systems
The appropriate OPC server and configuration tools are
included in the scope of supply of the respective communication software
Enhanced redundancy over 4-way communication
(STEP 7 V5.1 + SP4 and higher)
6GK1716-0HB12-0AC0

Professional/Ultimate;
for 64-bit: Windows 2008 Server R2;
for 32/64-bit Windows 8 Pro;
German/English;
For CP 1613 A2, CP 1623, CP 1628
12/8
MRP
PowerPack V12
Software for fail-safe S7 communication via redundant networks,

incl. S7 OPC server, HARDNETIE S7, runtime software, software
and electronic manual on CD-ROM,
12
PN
Article No.
Upgrade
As of Edition 2006 to
S7-REDCONNECT Edition 2008 or
V12
From V6.0, V6.1, V6.2 or V6.3 to
S7-REDCONNECT Edition 2008 or
V12
G_IK10_XX_10048
S7-400H
PROFIBUS
TCP/
UDP
G_IK10_XX_10184
PC with
2 x CP 1613 A2/CP 1623/CP 1628
and HARDNET-IE
S7-REDCONNECT
Industrial Ethernet
6GK1161-3AA01
PCI card (32-bit, 33 MHz/66 MHz;

3.3 V/5 V universal keyed) for
connection to Industrial Ethernet
(10/100 Mbit/s) with ITP and RJ45
connection over HARDNET-IE S7
and S7-REDCONNECT, for
operating system support see
SIMATIC NET Software
CP 1623 communications
processor
6GK1162-3AA00
PCI Express x1 card for

(10/100/1000 Mbit/s), with 2-port
switch (RJ45) via HARDNET-IE S7
and S7-REDCONNECT. For
operating system support, see
SIMATIC NET Software
CP 1628 communications
processor
PCI Express x1 card for
(10/100/1 000 Mbit/s), with 2-port
switch (RJ45) and integrated
security (firewall, VPN) via
HARDNET-IE S7 and
S7-REDCONNECT. For operating
system support, see SIMATIC NET
Software
6GK1162-8AA00
Siemens AG 2014

Overview
Ordering data
SOFTNET/
HARDNET-IE S7 and
IE S7 OPC Redundancy
SOFTNET/
HARDNET-IE S7 and
Article No.
SOFTNET S7
for Industrial Ethernet
Software for S7 and open communication, incl. OPC server, PG/OP
communication, and NCM PC /
STEP 7 Professional V12, runtime
software, software and electronic
manual on CD-ROM, license key on
a USB stick, Class A
HMI
SOFTNET-IE S7 V12
For 32/64-bit Windows 7
Professional/Ultimate
for 32/64-bit Windows 8 Pro
German/English
Industrial
Ethernet
S7-1200 with
CSM 1277
G_IK10_XX_10045
S7-300 with
CP 343-1
S7-400 with
CP 443-1
PN
MRP
OPC
PG/OP S7/S5
IT
Software for coupling programming devices/workstations to

automation systems
- S7 communication
- Open communication (SEND/RECEIVE)
Can be used with
- Layer 2 Ethernet card (PCI/PCIe), e.g. CP 1612 A2
- Integrated Industrial Ethernet interface
- Modem/ISDN (Remote Access Service RAS)
Complete protocol stack as a software package
Increased availability thanks to additional option packages
such as OPC Server Redundancy
6GK1704-1CW00-3AE0
6GK1704-1CW00-3AE1
SOFTNET-IE S7 REDCONNECT
VM V12
Software for fail-safe S7 communication via redundant networks, incl.
S7 OPC server, HARDNET-IE S7,
license key on USB stick, Class A
for 32/64-bit: Windows 7 Professional/Ultimate
German/English
6GK1704-0HB12-0AA0
SOFTNET-IE S7 Lean Edition V12

Up to eight connections
6GK1704-1LW12-0AA0
6GK1704-1LW00-3AL0
For 1 year with automatic extension

Requirement: Current software
version
Upgrade
from Edition 2006 to Edition 2008
or V12
from V6.0, V6.1, V6.2 or V6.3 to
Edition 2008 or V12
Performance data
S7 and PG/OP communication
(number of operable connections)
SOFTNET-IE S7
SOFTNET-IE S7 Lean
6GK1704-1CW00-3AL0
Upgrade
or V12
from V6.0, V6.1, V6.2 or V6.3 to
Edition 2008 or V12
G_IK10_XX_10185
TCP/
UDP
6GK1704-1CW12-0AA0

For 1 year with automatic extension;
version
System configuration SOFTNET for Industrial Ethernet
ISO
Up to 64 connections
12
6GK1704-1LW00-3AE0
6GK1704-1LW00-3AE1
max. 64
max. 8
12/9
Siemens AG 2014

Ordering data
Article No.
SOFTNET-PG
for Industrial Ethernet
Software for PG/OP communication,
license key on USB flash drive,
Class A
6GK1704-1PW00-3AE0
6GK1704-1PW00-3AE1
Software for redundant OPC
servers in the environment of Industrial Ethernet software, S7 products,
Class A
SOFTNET-IE PG V12
For 32/64-bit: Windows 7 Professional/Ultimate; for 64-bit:
Windows 2008 Server R2
German/English
6GK1704-1PW12-0AA0
Software update
6GK1704-1PW00-3AL0

version
12
12/10
Article No.
Upgrade
or V12
from V6.0, V6.1, V6.2 or V6.3 to
Edition 2008 or V12
IE S7 OPC Redundancy V12

For 64-bit: Windows 2008 Server
R2; German/English
6GK1706-1CW12-0AA0
Siemens AG 2014

SOFTNET PN IO
Overview
SIMATIC NET
OPC-Scout
PC/IPC with
SOFTNET PN IO
WinCC
OPC-Client
OPC UA
Microsoft Office
OPC-Client
OPC XML
Webclient
COM/DCOM
Internet
Intranet
OPC XML DA
as Webservice
PN IO OPC-Server
PROFINET
Communication
SOFTNET PN IO
PROFINET
Industrial Ethernet
IE/PB Link
PN IO
ET 200pro
ET 200S with
IM 151-3 PN
G_IK10_XX_10073
PROFIBUS
e.g. S7-300 with

CPU 31x and
CP 343-1 Advanced
e. g. S7-300 with
CP 342-5 as Slave
ET 200S
PC with SOFTNET PN IO as PROFINET IO Controller
TCP/
UDP
PN
MRP
OPC
PG/OP S7/S5
IT
G_IK10_XX_10170
ISO
Software with PROFINET IO Controller function for coupling

PG/PC and IPC with PROFINET IO Devices
Possible applications:
- PC-based control systems
- HMI systems
- Test applications
- PROFINET IO controller
Can be used with
- Layer 2 Ethernet card (PCI/PCIe), e.g. CP 1612 A2
- Integral Industrial Ethernet interfaces of
SIMATIC programming devices/PCs
Cost-effective solution for the low-end performance range
OPC server for I/O connection over PROFINET included in
scope of delivery
12
12/11
Siemens AG 2014

SOFTNET PN IO
Ordering data
SOFTNET PN IO
Performance data
Number of operable IO devices
Number of external IO-lines in one
central rack
Size of IO data areas overall
- I/O input area
- I/O output area
Size of I/O data area per connected
I/O device
- I/O input range
- I/O output range
Max. 64
Max. 1
Max. 2 KB
Max. 2 KB
Max. 1433 byte

Max. 1433 byte
Article No.
SOFTNET PN IO
Software for PROFINET IO
Controller with OPC server and
NCM PC / STEP7 Professional V12,
Class A
SOFTNET-IE PN IO V12
For 32/64-bit Windows 7
for Windows 2008 Server R2
for 32/64 Bit Windows 8 Pro
German/English
6GK1 704-1HW12-0AA0
6GK1704-1HW00-3AL0

Requirement: current software
version
Upgrade
from Edition 2006 to SOFTNET PN
IO Edition 2008 or V12
from V6.0, V6.1, V6.2 or V6.3 to
SOFTNET PN IO Edition 2008 or
V12
12
12/12
6GK1704-1HW00-3AE0
6GK1704-1HW00-3AE1
Siemens AG 2014

Overview
PC/Windows PC
SIMATIC NET
OPC-Scout
WinCC
OPC-Client
Microsoft Office
OPC-Client
OPC XML
Webclient
OPC UA
COM/DCOM
DP OPC server
FMS OPC server
DP protocol
FMS protocol
S7 OPC server
S7 communication
Internet
Intranet
S/R OPC server
PN IO OPC server
Open
communication
(SEND/RECEIVE)
PROFINET
SNMP
OPC server
OPC XML DA
as Web service
SNMP
PROFINET
Industrial Ethernet
S7-1500
S7-1500
S7-1200
PC
S7-400
S7-1200
ET 200pro
SIMATIC S5
PC
SIMATIC S5
(SEND/RECEIVE only)
PROFIBUS
G_IK10_XX 10103
S7-300
System integration with OPC server
OPC (Openness, Productivity & Collaboration) is a

standardized, open, and vendor-independent interface that is
widely used in automation.
A fundamental distinction is made between the classic OPC and
its consistent further development OPC UA (Unified Architecture). Smooth migration to the new OPC UA standard is easily
possible; this offers further value added, such as security. The
SIMATIC NET OPC servers offer the two interfaces OPC UA and
classic OPC for SIMATIC S7 and PROFINET.
The corresponding OPC servers are included in the scope of
supply of the respective communication software
Standardized, open, multi-vendor interface
It permits interfacing of OPC-capable Windows applications
to S7 communication, open communication (SEND/RECEIVE),
PROFINET, and SNMP
Increased availability thanks to additional option packages
such as OPC server redundancy
OPC Scout with browser functionality as an OPC client and
OCX Data Control/.NET Data Control for simple OPC client
creation
12
12/13
Siemens AG 2014

Programming
Ordering data
Synchronous and asynchronous
reading and writing of variables
Monitoring of variables using the
OPC server with a signal to the client
when a change occurs
Use of quantity operations; so a
large amount of data can be
processed in a short time.
Custom Interface (C++, NET) for
high OPC performance
Interfaces
Automation Interface (VB, Excel,

Access, Delphi, ...) for ease-of-use
Graphics with OCX or .NET Data
Control; for configuring instead of
programming
OPC XML-Interface for Data Access
Products
include OPC servers for:
Industrial Ethernet
HARDNET-IE S7, SOFTNET-IE S7,
SOFTNET-IE S7 Lean
S7-OPC server for

S7 communication, XML-DA
SNMP OPC server

S7 OPC Redundancy
PROFINET
SOFTNET-IE PN IO
S5-OPC server for open

communication1) communication,
XML-DA
SNMP OPC server for SNMP protocol
access; XML-DA
Redundant S7-OPC server
for S7 communication
PN IO OPC server for PROFINET IO
communication; XML-DA
PROFIBUS
HARDNET-PB DP, SOFTNET-PB DP, DP-OPC server for PROFIBUS DP
SOFTNET-PB DP slave
FMS-OPC server for PROFIBUS FMS
FMS-5613
HARDNET-PB S7, SOFTNET-PB S7 S7-OPC server for
S7 communication, XML-DA
Redundant S7-OPC server
S7 OPC Redundancy
for S7 communication
1)
also S5-compatible communication
12
12/14
SNMP OPC server
Article No.
See SNMP OPC server
Status monitoring of SNMP-capable

devices in any OPC client systems;
e.g. SIMATIC WinCC/PCS 7
S7 OPC Redundancy
Software for redundant OPC
servers in the environment of Industrial Ethernet software, S7 products,
Class A
S7 OPC Redundancy V12
For 64-bit: Windows 2008 Server
R2; German/English
6GK1706-1CW12-0AA0
6GK1706-1CW00-3AL0
For 1 year with automatic extension;

version
Siemens AG 2014

SNMP OPC server
Overview
Ordering data
Article No.
SNMP OPC server

Including MIB compiler; single
license for one installation of
runtime software; software and
electronic manual on CD-ROM;
license key on USB stick, Class A
Pumpstation Network
SNMP OPC Server Basic

1GBit
Pump Substation 1
Pump Old
S_IK10_XX_00004
Pump Main
Status monitoring of SNMP-capable devices in any OPC client

systems; e.g. SIMATIC WinCC/PCS 7
Easy access to SNMP-capable devices over the OPC
interface
Devices without SNMP agents can be monitored using the
ping mechanism
Configuration with STEP 7 (up to STEP 7 V5.5) or NCM PC
Ready-to-use SNMP diagnostics profiles for Siemens devices,
e.g. SCALANCE X/W
Generation of any SNMP diagnostics profiles by means of the
integral MIB compiler
Easy setup of the monitored devices with the help of an
Autodiscovery function
Administration of up to
20 IP addresses
Basic V12
for 32/64-bit: Windows 7
for 64-bit: Windows 2008 Server
R2
for 32/64-bit: Windows 8 Pro
Software Update Service SNMP
OPC Server Basic
6GK1706-1NW12-0AA0
6GK1706-1NW00-3AL0

Requirement: current software
version
Upgrade SNMP OPC Server Basic
or V12
from V6.0, V6.1, V6.2 or V6.3 to
Edition 2008 or V12
6GK1706-1NW00-3AE0
6GK1706-1NW00-3AE1
SNMP OPC Server Extended

Administration of up to
200 IP addresses
Extended V12
for 32/64-bit: Windows 7
for 64-bit: Windows 2008 Server
R2
for 32/64-bit Windows Pro
Software Update Service SNMP
OPC Server Extended
6GK1706-1NX12-0AA0
6GK1706-1NX00-3AL0

version
Upgrade SNMP OPC Server
Extended
or V12
from V6.0, V6.1, V6.2 or V6.3 to
Edition 2008 or V12
6GK1706-1NX00-3AE0
6GK1706-1NX00-3AE1
SNMP OPC Server Power Pack
12
For upgrade from

SNM OPC Server Basic to
SNM OPC Server Extended
PowerPack V12
6GK1706-1NW12-0AC0
12/15
Siemens AG 2014

Notes
12
12/16
15
Siemens AG 2014
Appendix
15/2
Siemens Industry Training
15/3
15/3
Additional documentation
15/4
15/4
15/5
Standards and approbations

CE marking
Certificates
15/5
Quality management
15/6
Partners at Industry Automation and

Drive Technologies
Siemens contacts worldwide
Siemens Solution Partner
Automation Drives
15/6
15/7
15/8
15/8
15/10
15/10
15/11
15/12
15/12
Siemens Automation Cooperates with

Education
Applicable practical know-how
Online Services
Information and Ordering in the Internet
and on DVD
Information and Download Center,
Social Media, Mobile Media
15/13
Industry Services
Your machines and plant can do more
with Industry Services.
Industry Services for the entire life cycle
15/17
Software Licenses
15/19
Index
15/21
Article No. index
15/26
Conditions of sale and delivery
Siemens AG 2014
Appendix
Siemens Industry Training
Faster and more applicable know-how:
Hands-on training from the manufacturer
Siemens Industry Training provides you with comprehensive
support in solving your tasks.
Training by the market leader in the industry enables you to
make independent decisions with confidence. Especially where
the optimum and efficient use of products and plants are concerned. You can eliminate deficiencies in existing plants, and
exclude expensive faulty planning right from the beginning.
Highlights Siemens Industry Training

Top trainers
Our trainers are skilled teachers with direct practical experience.
Course developers have close contact with product development, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers enables them to teach
theory effectively. But since theory can be pretty drab, we attach
great importance to practical exercises which can comprise up
to half of of the course time. You can therefore immediately implement your new knowledge in practice. We train you on stateof-the-art methodically/didactically designed training equipment. This training approach will give you all the confidence you
need.
Wide variety
With a total of about 300 local attendance courses, we train the
complete range of Siemens Industry products as well as interaction of the products in systems.
Tailor-made training
We are only a short distance away. You can find us at more than
50 locations in Germany, and in 62 countries worldwide. You
wish to have individual training instead of one of our
300 courses? Our solution: We will provide a program tailored
exactly to your personal requirements. Training can be carried
out in our Training Centers or at your company.
The right mixture: Blended learning
First-class know-how directly pays for itself: In shorter startup

times, high-quality end products, faster troubleshooting and reduced downtimes. In other words, increased profits and lower
costs.
Achieve more with Siemens Industry Training
Shorter times for startup, maintenance and servicing
Optimized production operations
Reliable configuration and startup
Minimization of plant downtimes
Flexible plant adaptation to market requirements
Compliance with quality standards in production
Increased employee satisfaction and motivation
Shorter familiarization times following changes in technology
and staff
Contact
Visit our site on the Internet at:
www.siemens.com/sitrain
or let us advise you personally.
Siemens Industry Training Customer Support Germany:
Phone: +49 (911) 895-7575
Fax:
+49 (911) 895-7576
E-Mail: [email protected]
15
15/2
"Blended learning" is a combination of various training media

and sequences. For example, a local attendance course in a
Training Center can be optimally supplemented by a teach-yourself program as preparation or follow-up. Additional effect:
Reduced traveling costs and periods of absence.
Siemens AG 2014
Appendix
Additional documentation
Overview
The SIMATIC manual collection brings together the manuals of
Totally Integrated Automation in the smallest possible package.
It is eminently suitable for startup and service, replaces the
space-consuming paper version in the office and provides fast
access to the information.
The manual collection contains manuals in 5 languages for
LOGO!
SIMADYN
SIMATIC bus components
SIMATIC C7
SIMATIC Distributed I/O
SIMATIC HMI
SIMATIC Sensors
SIMATIC NET
SIMATIC PC Based Automation
SIMATIC PCS 7
SIMATIC PG/PC
SIMATIC S7
SIMATIC Software
SIMATIC TDC
Manuals that are not yet available in all 5 languages will at least
be included in English and German.
There is an update contract for the SIMATIC Manual Collection
that encompasses supply of the up-to-date collection and three
subsequent updates which is valid for one year. If the update
contract is not cancelled, it is automatically extended and the list
price will be charged to the customer.
Ordering data
Article No.
6ES7998-8XC01-8YE0

multilingual:
LOGO!, SIMADYN, SIMATIC Bus
components, SIMATIC C7,
SIMATIC Distributed IO,
SIMATIC HMI, SIMATIC Sensors,
SIMATIC NET, SIMATIC PC Based
Automation, SIMATIC PCS 7,
and the three subsequent
updates
6ES7998-8XC01-8YE2
15
15/3
Siemens AG 2014
Appendix
Standards and approbations
CE marking
Overview
Notes for machine manufacturers
The electronic products described in this catalog comply with

the requirements and protection objectives of the following
EC directives insofar as they relate to the product concerned.
They also comply with the corresponding harmonized European
standards (EN) published for these products in the Official
Journals of the European Community.
Directive 2004/108/EC of the European Parliament and
Council on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC Directive)
Directive 2006/95/EC of the European Parliament and of the
Council on the harmonization of the laws of Member States
relating to electrical equipment designed for use within certain
voltage limits (Low Voltage Directive)
Directive 94/9/EC of the European Parliament and the Council
on approximation of the laws of the Member States concerning equipment and protective systems intended for use in
potentially explosive atmospheres (ATEX Directive).
Directive 1999/5/EC of the European Parliament and of the
Council on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity
(RTTE Directive)
The SIMATIC automation system is not a machine within the

context of the EU machine guidelines. Therefore a declaration of
conformity with regard to the EU machine directive 89/392/EEC
or 2006/42/EU (new edition, applicable from end of 2009) may
not be provided for SIMATIC.
The EU machine directive regulates the requirements placed on
a machine or a part thereof. A machine is understood for the
purposes of this guideline to be a combination of interconnected
parts or mechanisms (see also EN 292-1, Paragraph 3.1).
SIMATIC is part of the electrical equipment of a machine, and
must therefore be integrated into the evaluation of the complete
machine by the machine manufacturer.
As electrical equipment, SIMATIC is subject to the low-voltage
directive which, as a "total safety directive", covers all dangers
just like the machine directive.
The EN 60204-1 standard (safety of machines, general requirements for the electrical equipment of machines) is applicable to
the electrical equipment of machines.
Note on the EMC Directive:
The following table will help you in the provision of your declaration of conformity, and shows which criteria according to
EN60204-1 (2006-06) apply to SIMATIC. You can obtain further
information from the enclosed declaration of conformity
according to the low-voltage and EMC directives (with list of
included standards).
In terms of their interference emissions, SIMATIC products are

designed for industrial applications.
EN 60204-1
Topic/criterion
Notes
Paragraph 4
General
requirements
The requirements are met when

the equipment is assembled/
installed in accordance with the
installation guidelines.
Please note the relevant
information in the manuals.
The originals of the declarations of conformity are kept available

by us for the responsible supervisory authorities.
If individual products deviate from this specification, it is noted

in the catalog with the products.
The installation instructions in the manuals must be adhered to
when installing and operating the products described in this
catalog. These contain, for example, important information on
installation in cabinets and on the use of shielded cables.
15
15/4
Paragraph 11.2 Digital input/output

interfaces
The requirements are met
Paragraph 12.3 Programmable

equipment
The requirements are met when

the equipment is installed in
lockable cabinets to protect
against alteration of the memory
contents by unauthorized
persons
Paragraph 20.4 Voltage tests
The requirements are met
Siemens AG 2014
Appendix
Standards and approbations, quality management
Certificates, authorizations, approbations,
declarations of conformity
An overview of the certificates available for SIMATIC products
(CE, UL, CSA, FM, shipping authorizations) can be found in the
internet at
www.siemens.com/simatic/certificates
The lists are continously updated. The data for products which
have not yet been included in the overview is continously
collected and prepared for the subsequent edition.
You can also find certificates, approbations, verification
certificates or characteristic curves under Product support
"Entry list"
Quality management
The quality management system of the Industry Sector, Industry
Automation Division, complies with the international standard
ISO 9001.
The products and systems described in this catalog are sold
under application of a quality management system certified by
DQS in accordance with DIN EN ISO 9001.
The DQS certificate is recognized in all EQ Net countries.
DQS Registered Certificate No.:
Siemens AG
I IA AS Industrial Automation Systems
Reg.No.: 001323 QM08
or by going directly to the Link Box:
15
15/5
Siemens AG 2014
Appendix
Partners at Industry Automation and Drive Technologies
Siemens contacts worldwide
Overview
At Siemens Industry Automation and Drive Technologies, more
than 85 000 people are resolutely pursuing the same goal: longterm improvement of your competitive ability. We are committed
to this goal. Thanks to our commitment, we continue to set new
standards in automation and drive technology. In all industries
worldwide.
At your service locally, around the globe for consulting, sales,
training, service, support, spare parts ... on the entire Industry
Automation and Drive Technologies range.
Your personal contact can be found in our Contacts Database at:
www.siemens.com/automation/partner
You start by selecting a
Product group,
Country,
City,
Service.
15
15/6
Siemens AG 2014
Appendix
Partner at Industry Automation and Drive Technologies
Siemens Solution Partner Automation Drives
Overview
Siemens Solution Partner Automation Drives
Solution Partner Finder
Solution Partner: Highest quality - guaranteed

The products and systems from Siemens Industry Automation
and Drive Technologies offer the ideal platform for all automation
applications.
Under the name of Siemens Solution Partner Automation Drives,
selected system integrators around the world act as uniformly
qualified solution providers for the Siemens range of products
and services in the fields of automation and drives. Day after
day, they utilize their qualified product and system know-how as
well as their excellent industry expertise to your advantage for
all requirements.
The partner emblem is the guarantee and indicator of proven
quality. The basis for this are defined quality features that identify
Solution Partners as reliable and competent solution providers:
Solution quality
Always a good result with tried and tested solutions expertise.
Expert quality
Certified technical competence ensures maximum efficiency.
Project quality
With proven project experience straight to the target.
Portfolio quality
Comprehensive portfolio for state-of-the-art solutions from a
single source.
The Siemens Solution Partner Program helps you to find the

optimum partner for your specific requirements.
Support is provided by the Solution Partner Finder, a comprehensive online platform that showcases the profiles of all our
solution partners. You can convince yourself of the competence
of the respective Solution Partner by means of the references
provided. Various search criteria are available for this purpose.
Once you have located a partner, you are only one small step
away from contacting them.
Find the right partner here for your specific task and convince
yourself of the solution competence provided:
www.siemens.com/automation/partnerfinder
Additional information on the Siemens Solution Partner Program
is available online at:
www.siemens.com/solutionpartner
15
15/7
Siemens AG 2014
Appendix
Siemens Automation Cooperates with Education
Comprehensive teaching support for educational institutions

The new TIA Portal training materials for SIMATIC S7-1200 are
available in English, German, French, Italian, Spanish and
Chinese for download.
www.siemens.com/sce/documents
Trainer packages for hands-on learning
Siemens Automation Cooperates with Education (SCE)

offers a global system for sustained support of technical skills.
SCE supports educational institutions in their teaching assignment in the industrial automation sector and offers added value
in the form of partnerships, technical expertise, and know-how.
As the technological leader, our comprehensive range of
services can support you in the knowledge transfer for Industry
4.0.
Our services at a glance
Training curriculums for your lessons
Trainer packages for hands-on learning
Courses convey up-to-date, specialist knowledge
Support for your projects/textbooks
Complete didactic solutions from our partners
Personal contact for individual support
Training curriculums for your lessons
Use our profound industrial know-how for practice-oriented and

individual design of your course. We offer you more than 100
didactically prepared training curriculums on the topics of
automation and drives technology free of charge. These
materials are perfectly matched to your curricula and syllabuses, and optimally suited for use with our trainer packages.
This takes into account all aspects of a modern industrial
solution: installation, configuration, programming, and commissioning. All documents, including projects, can be individually
matched to your specific requirements.
15
Particular highlights:
With the new SIMATIC PCS 7 curriculums and trainer
packages, you can pass on basic, practice-oriented PCS 7
knowledge at universities within about 60 hours
(= 1 semester), using plant simulation.
15/8
Our SCE trainer packages offer a specific combination of

original industrial components which are perfectly matched to
your requirements and can be conveniently used in your course.
These price reduced bundles available exclusively to schools
include innovative and flexible hardware and software
packages. SCE can currently offers more than 90 SCE trainer
packages including related equipment. These cover both the
factory and process automation sectors. You can use them to
impart the complete course contents on industrial automation at
a very low cost.
Trainer packages are available for:
Introduction to automation technology with LOGO! logic
module and SIMATIC S7-1200 compact controller
PLC engineering with SIMATIC S7 hardware and STEP 7
software (S7-300, S7-1500 and TIA Portal)
Operator control and monitoring with SIMATIC HMI
Industrial networking over bus systems with SIMATIC NET
(PROFINET, PROFIBUS, IO-Link)
Sensor systems with VISION, RFID and SIWAREX
Process automation with SIMATIC PCS 7
Power Monitoring Devices SENTRON PAC 4200
Motor Management SIMOCODE
Networked drive and motion technologies with SINAMICS/
SIMOTION
CNC programming with SinuTrain
Important ordering notes:
Only the following institutions are authorized to obtain trainer
packages: vocational schools, Colleges and Universities,
in-house vocational training departments, non commercial
research institutions and non commercial training departments.
To purchase a trainer package, you require a specific end-use
certificate, which you can obtain from your regional sales office.
www.siemens.com/sce/tp
Siemens AG 2014
Appendix
Siemens Automation Cooperates with Education
Comprehensive teaching support for educational institutions (continued)

Courses convey up-to-date specialist knowledge
We can provide you with consulting for selected projects and

support from your personal SCE contact as well as our web
based and regional Customer Support.
As a particular service, SCE supports technical authors with our
know-how as well as with intensive technical consulting.
Siemens library of special textbooks covering the industrial
automation sector provides an additional resource for you and
your students. These can be found at the SCE web site.
www.siemens.com/sce/contact
www.siemens.com/sce/books
Complete didactic solutions
Profit from our excellent know-how as the leader in industrial

technologies. We offer you specific courses for automation and
drive technology worldwide. These support you in the practiceoriented transferring of product and system know-how, are in
conformance with curriculums, and derived from the training
fields. Compact technical courses especially for use at universities are also available.
Our range of courses comprises a wide variety of training
modules based on the principle of Totally Integrated Automation
(TIA). The focus is on the same subject areas as with the SCE
trainer packages.
Every PLC and drive course is oriented on state-of-the-art
technology. Your graduates can thus be prepared optimally for
their future professional life.
Our partners for learning systems offer a wide range of training

systems and solutions for use in your courses or laboratory.
These models have been designed based on our trainer

packages and thus save you the time and cost of selfconstruction of individual components. The Partner systems
provide you with simple and effective help in the fulfillment of
your teaching assignment.
Support for your projects/textbooks
www.siemens.com/sce/partner
In some countries we are offering classes based on our training

curriculums. Please inquire with your SCE contact partner.
Contact for individual support

You can find your personal SCE contact on our Internet site. Your
local SCE Promoter will answer all your questions concerning the
complete SCE offering, and provide you with timely and
competent information about innovations. When you encounter
challenges, you can profit from our global team of excellence.
If a direct SCE contact is not listed for your country, please
contact your local Siemens office.
SCE Support Finder for your Internet request
You are an educator and need support on the topic of industry
automation? Send us your request:
www.siemens.com/sce/supportfinder
Automation and drive technology is characterized by continuous

and rapid developments. Service and Support therefore play an
important role.
6FDQWKH45
FRGHIRUIXUWKHU
LQIRUPDWLRQ
6&(KRPHSDJH
15
15/9
Siemens AG 2014
Appendix
Online Services
Information and Ordering
in the Internet and on DVD
Siemens Industry Automation and Drive Technologies in the WWW

A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
Siemens Industry Automation and Drive Technologies has
therefore built up a comprehensive range of information in the
World Wide Web, which offers quick and easy access to all data
required.
Under the address
www.siemens.com/industry
you will find everything you need to know about products,
systems and services.
Product Selection Using the Interactive Catalog CA 01 of Industry

Detailed information together with convenient interactive
functions:
The interactive catalog CA 01 covers more than 80 000 products
and thus provides a full summary of the Siemens Industry Automation and Drive Technologies product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the interactive catalog CA 01 can be found in the
Internet under
www.siemens.com/automation/ca01
or on DVD.
Easy Shopping with the Industry Mall

The Industry Mall is the electronic ordering platform of
Siemens AG on the Internet. Here you have online access
to a huge range of products presented in an informative and
attractive way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking and tracing of the order to
be carried out. Availability checks, customer-specific discounts
and preparation of quotes are also possible.
Numerous additional functions are available to support you.
For example, powerful search functions make it easy to select
the required products. Configurators enable you to configure
complex product and system components quickly and easily.
CAx data types are also provided here.
15
Please visit the Industry Mall on the Internet under:

15/10
Siemens AG 2014
Appendix
Online Services
Information and Download Center
Social Media, Mobile Media
Downloading Catalogs
In addition to numerous other useful documents, you can also
find the catalogs listed on the back inside cover of this catalog
in the Information and Download Center. Without having to register, you can download these catalogs in PDF format or increasingly as digital page-turning e-books.
The filter dialog box above the first catalog displayed makes it
possible to carry out targeted searches. If you enter MD 3 for
example, you will find both the MD 30.1 and MD 31.1 catalogs.
If you enter ST 70 both the ST 70 catalog and the associated
news or add-ons are displayed.
Visit us on the web at:
www.siemens.com/industry/infocenter
Social Media
Connect with Siemens through social media: visit our social networking sites for a wealth of useful information, demos on products and services, the opportunity to provide feedback, to exchange information and ideas with customers and other
Siemens employees, and much, much more. Stay in the know
and follow us on the ever-expanding global network of social
media.
Connect with Siemens Industry at our central access point:
www.siemens.com/industry/socialmedia
Or via our product pages at:
www.siemens.com/automation
or
www.siemens.com/drives
To find out more about Siemens' current social media activities
visit us at:
www.siemens.com/socialmedia
Mobile Media
Discover the world of Siemens.
We are also constantly expanding our offering of cross-platform
apps for smartphones and tablets. You will find the current
Siemens apps at the app store (iOS) or at Google Play (Android).
The Siemens app, for example, tells you all about the history,
latest developments and future plans of the company with informative pictures, fascinating reports and the most recent press
releases.
15
15/11
Siemens AG 2014
Appendix
Industry Services
with Industry Services.
Whether it is production or process industry - in view of rising
cost pressure, growing energy costs, and increasingly stringent
environmental regulations, services for industry are a crucial
competitive factor in manufacturing as well as in process industries.
All over the world Siemens supports its customers with product,
system, and application-related services throughout the entire
life cycle of a plant. Right from the earliest stages of planning,
engineering, and building, all the way to operation and modernization. These services enable customers to benefit from the
Siemens experts unique technological and product knowledge
and industry expertise.
Thus downtimes are reduced and the utilization of resources is
optimized. The bottom line: increased plant productivity, flexibility, and efficiency, plus reduced overall costs.
Discover all advantages of our service portfolio:
www.siemens.com/industry-services
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
(QHUJ\
(QYLURQPHQWDO6HUYLFHV
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
(QHUJ\
0RGHUQL]DWLRQ
2SWLPL]DWLRQ6HUYLFHV
Modernization
Modernization
Planning
Planning
Online Support
Technical Support
Spare Parts
Repair Services
Field Services
Training
Operation
Operation
7HFKQLFDO&RQVXOWLQJ
(QJLQHHULQJ6XSSRUW
Engineer
Engineer
&
& Build
Build
(QHUJ\
3ODQW0DLQWHQDQFH
&RQGLWLRQ0RQLWRULQJ
6HUYLFH&RQWUDFWV
(QHUJ\ (QYLURQPHQWDO6HUYLFHV
0RGHUQL]DWLRQ 2SWLPL]DWLRQ6HUYLFHV
G_DA65_EN_00270
Siemens supports its clients with technology based Services across a plants entire life cycle.
15
15/12
Siemens AG 2014
Appendix
Industry Services
Industry Services
for the entire life cycle
Online Support
Online support is a comprehensive information system for all
questions relating to products, systems, and solutions that
Siemens has developed for industry over time. With more than
300,000 documents, examples and tools, it offers users of automation and drive technology a way to quickly find up-to-date information. The 24-hour service enables direct, central access to
detailed product information as well as numerous solution examples for programming, configuration and application.
The content, in six languages, is increasingly multimediabased
and now also available as a mobile app. Online supports
Technical Forum offers users the opportunity to share information with each other. The Support Request option can be used
to contact Siemens technical support experts. The latest content, software updates, and news via newsletters and Twitter ensure that industry users are always up to date.
www.siemens.com/industry/onlinesupport
Online Support App
Using the Online Support app, you can access over 300,000
documents covering all Siemens industrial products - anywhere,
any time. Regardless of whether you need help implementing
your project, fault-finding, expanding your system or are planning a new machine.
The search function retrieves product information and articles

and supports you with a personalized suggestion list. You can
find your favorite pages articles you need frequently under
mySupport. You also receive selected news on new functions,
important articles or events in the News section.
You have access to FAQs, manuals, certificates, characteristics

curves, application examples, product notices (e.g. announcements of new products) and information on successor products
in the event that a product is discontinued.
Just scan the product code printed on the product directly using
the camera of your mobile device to immediately see all technical information available on this product at a glance. The graphical CAx information (3D model, circuit diagrams or EPLAN macros) is also displayed. You can forward this information to your
workplace using the e-mail function.
Scan the QR code

for information on
our Online Support
app.
The app is available free of charge from the Apple App Store
(iOS) or from Google Play (Android).
www.siemens.com/industry/onlinesupportapp
Technical Support
The ability to quickly analyze system and error messages and
take appropriate action are key factors in ensuring that plants
run safely and efficiently. Questions can arise at any time and in
any industry, whether its an individual product or a complete automation solution. Siemens technical support offers individual
technical assistance in matters related to functionality, how to
operate, applications, and fault clearance in industrial products
and systems at any time and globally, over the phone, by email, or via remote access. Experienced experts from Siemens
answer incoming questions promptly. Depending on the requirements, they first consult specialists in the areas of development,
on-site services, and sales. Technical support is also available
for discontinued products that are no longer available. Using the
support request number, any inquiry can be clearly identified
and systematically tracked.
15
15/13
Siemens AG 2014
Appendix
Industry Services
Industry Services
Spare Parts
Drive and automation systems must be available at all times.
Even a single missing spare part can bring the entire plant to a
standstill and result in substantial financial losses for the operator. The spare parts services from Siemens protects against
such losses with the aid of quickly available, original spare
parts that ensure smooth interaction with all other system components. Spare parts are kept on hand for up to ten years; defective parts can be returned. For many products and solutions,
individual spare parts packages ensure a preventive stock of
spare parts on-site. The spare parts services is available around
the world and around the clock. Optimum supply chain logistics
ensure that replacement components reach their destination as
quickly as possible. Siemens logistics experts take care of planning and management as well as procurement, transportation,
customs handling, warehousing, and complete order management for spare parts.
Repair Services
Reliable electrical and electronic equipment is crucial for operating continuous processes. That is why it is essential that motors and converters always undergo highly specialized repair
and maintenance. Siemens offers complete customer and repair
services on site and in repair centers as well as technical
emergency services worldwide. The repair services include all
measures necessary to quickly restore the functionality of defective units. In addition, services such as spare parts logistics,
spare parts storage and rapid manufacturing are available to
plant operators in all verticals. With a global network of certified
repair shops operated by Siemens as well as third parties, Siemens handles the maintenance and overhaul of motors, converters, and other devices as an authorized service partner.
Field Services
Its a top priority in all industries: the availability of plants and
equipment. Siemens offers specialized maintenance services
such as inspection and upkeep as well as rapid fault clearance
in industrial plants worldwide, continuously, and even with
emergency services as needed. The services include startup as
well as maintenance and fault clearance during operation. The
startup service includes checking the installation, function tests,
parameterization, integration tests for machines and plants, trial
operation, final acceptance, and employee training. All services,
including remote maintenance of drives, are also available as elements of customized service contracts.
15
15/14
Siemens AG 2014
Appendix
Industry Services
Industry Services
Training
Increasingly, up-to-date knowledge is becoming a determining
factor in success. One of the key resources of any company is
well-trained staff that can make the right decision at the right moment and take full advantage of the potential. With SITRAIN
Training for Industry, Siemens offers comprehensive advanced
training programs. The technical training courses convey expertise and practical knowledge directly from the manufacturer.
SITRAIN covers Siemens entire product and system portfolio in
the field of automation and drives. Together with the customer,
Siemens determines the companys individual training needs
and then develops an advanced training program tailored to the
desired requirements. Additional services guarantee that the
knowledge of all Siemens partners and their employees is always up-to-date.
Technical Consulting & Engineering Support

The efficiency of plants and processes leads to sustainable economic success. Individual services from Siemens help save substantial time and money while also guaranteeing maximum
safety. Technical consulting covers the selection of products and
systems for efficient industrial plants. The services include planning, consulting, and conceptual design as well as product
training, application support, and configuration verification in
all phases of a plants lifecycle and in all questions related to
product safety. Engineering support offers competent assistance throughout the entire project, from developing a precise
structure for startup to product-specific preparation for implementation as well as support services in areas such as prototype
development, testing and acceptance.
Energy & Environmental Services

Efficient energy use and resource conservation these top sustainability concerns pay off both for the environment and for
companies. Siemens offers integrated solutions that unlock all
technical and organizational potential for successful environmental management. Customized consulting services are aimed
at sustainably lowering the cost of energy and environmental
protection and thus increasing plant efficiency and availability.
The experts provide support in the conceptual design and implementation of systematic solutions in energy and environmental management, enabling maximum energy efficiency and optimized water consumption throughout the entire company.
Improved data transparency makes it possible to identify savings potential, reduce emissions, optimize production processes, and thereby noticeably cut costs.
15
15/15
Siemens AG 2014
Appendix
Industry Services
Industry Services
Modernization & Optimization Services
High machine availability, expanded functionality and selective
energy savings in all industries, these are decisive factors for
increasing productivity and lowering costs. Whether a company
wants to modernize individual machines, optimize drive systems, or upgrade entire plants, Siemens experts support the
projects from planning to commissioning.
Expert consulting and project management with solution responsibility lead to security and make it possible to specifically identify savings potential in production. This secures investments
over the long term and increases economic efficiency in operation.
Plant Maintenance & Condition Monitoring

Modern industrial plants are complex and highly automated.
They must operate efficiently in order to ensure the companys
competitive strength. In addition, the steadily increasing networking of machines and plants require consistent security concepts. Maintenance and status monitoring as well as the implementation of integrated security concepts by Siemens experts
support optimum plant use and avoid downtime. The services include maintenance management as well as consulting on maintenance concepts, including the complete handling and execution of the necessary measures. Complete solutions also cover
remote services, including analysis, remote diagnosis, and remote monitoring. These are based on the Siemens Remote Services platform with certified IT security.
Service Contracts
Making maintenance costs calculable, reducing interfaces,
speeding up response times, and unburdening the companys
resources the reduced downtimes that these measures
achieve increase the productivity of a plant. Service contracts
from Siemens make maintenance and repairs more cost-effective and efficient. The service packages include local and remote maintenance for a system or product group in automation
and drive technology. Whether you need extended service periods, defined response times, or special maintenance intervals,
the services are compiled individually and according to need.
They can be adjusted flexibly at any time and used independently of each other. The expertise of Siemens specialists and
the capabilities of remote maintenance thus ensure reliable and
fast maintenance processes throughout a plants entire lifecycle.
15
15/16
Siemens AG 2014
Appendix
Software Licenses
Overview
Software types
Software requiring a license is categorized into types.
The following software types have been defined:
Engineering software
Runtime software
Engineering software
This includes all software products for creating (engineering)
user software, e.g. for configuring, programming, parameterizing, testing, commissioning or servicing.
Data generated with engineering software and executable
programs can be duplicated for your own use or for use by thirdparties free-of-charge.
Runtime software
This includes all software products required for plant/machine
operation, e.g. operating system, basic system, system expansions, drivers, etc.
The duplication of the runtime software and executable programs created with the runtime software for your own use or for
use by third-parties is subject to a charge.
You can find information about license fees according to use in
the ordering data (e.g. in the catalog). Examples of categories of
use include per CPU, per installation, per channel, per instance,
per axis, per control loop, per variable, etc.
Information about extended rights of use for parameterization/configuration tools supplied as integral components of the
scope of delivery can be found in the readme file supplied with
the relevant product(s).
License types
Siemens Industry Automation & Drive Technologies offers various types of software license:
Floating license
Single license
Rental license
Rental floating license
Trial license
Demo license
Demo floating license
Floating license
The software may be installed for internal use on any number of
devices by the licensee. Only the concurrent user is licensed.
The concurrent user is the person using the program. Use
begins when the software is started.
A license is required for each concurrent user.
Single license
Unlike the floating license, a single license permits only one
installation of the software per license.
The type of use licensed is specified in the ordering data and
in the Certificate of License (CoL). Types of use include for
example per instance, per axis, per channel, etc.
One single license is required for each type of use defined.
Rental license
A rental license supports the "sporadic use" of engineering
software. Once the license key has been installed, the software
can be used for a specific period of time (the operating hours do
not have to be consecutive).
One license is required for each installation of the software.
Rental floating license

The rental floating license corresponds to the rental license,
except that a license is not required for each installation of the
software. Rather, one license is required per object (for example,
user or device).
Trial license
A trial license supports "short-term use" of the software in a nonproductive context, e.g. for testing and evaluation purposes.
It can be transferred to another license.
Demo license
The demo license support the "sporadic use" of engineering software in a non-productive context, for example, use for testing
and evaluation purposes. It can be transferred to another
license. After the installation of the license key, the software can
be operated for a specific period of time, whereby usage can be
interrupted as often as required.
One license is required per installation of the software.
Demo floating license
The demo floating license corresponds to the demo license,
except that a license is not required for each installation of the
software. Rather, one license is required per object (for example,
user or device).
Certificate of license (CoL)
The CoL is the licensee's proof that the use of the software has
been licensed by Siemens. A CoL is required for every type of
use and must be kept in a safe place.
Downgrading
The licensee is permitted to use the software or an earlier version/release of the software, provided that the licensee owns
such a version/release and its use is technically feasible.
Delivery versions
Software is constantly being updated.
The following delivery versions
PowerPack
Upgrade
can be used to access updates.
Existing bug fixes are supplied with the ServicePack version.
PowerPack
PowerPacks can be used to upgrade to more powerful software.
The licensee receives a new license agreement and CoL
(Certificate of License) with the PowerPack. This CoL, together
with the CoL for the original product, proves that the new software is licensed.
A separate PowerPack must be purchased for each original
license of the software to be replaced.
Upgrade
An upgrade permits the use of a new version of the software on
the condition that a license for a previous version of the product
is already held.
The licensee receives a new license agreement and CoL with
the upgrade. This CoL, together with the CoL for the previous
product, proves that the new version is licensed.
A separate upgrade must be purchased for each original license
of the software to be upgraded.
15
15/17
Siemens AG 2014
Appendix
Software Licenses
Overview
ServicePack
ServicePacks are used to debug existing products.
ServicePacks may be duplicated for use as prescribed according to the number of existing original licenses.
License key
Siemens Industry Automation & Drive Technologies supplies
software products with and without license keys.
The license key serves as an electronic license stamp and
is also the "switch" for activating the software (floating license,
rental license, etc.).
The complete installation of software products requiring license
keys includes the program to be licensed (the software) and the
license key (which represents the license).
15
15/18
Software Update Service (SUS)

As part of the SUS contract, all software updates for the respective product are made available to you free of charge for a period
of one year from the invoice date. The contract will automatically
be extended for one year if it is not canceled three months
before it expires.
The possession of the current version of the respective software
is a basic condition for entering into an SUS contract.
You can download explanations concerning license conditions from
www.siemens.com/automation/salesmaterial-as/catalog/en/
terms_of_trade_en.pdf
Siemens AG 2014
Appendix
Index
A
Accessories ................................................ 9/53

Additional documentation........................... 15/3
Add-on products from
third-party manufacturers .................. 3/48, 9/54
Analog expansion modules ........................ 9/63
Analog input modules................................. 9/18
Analog modules................................. 3/27, 3/29
Analog output modules............................... 9/27
Applicable practical know-how ......... 15/8, 15/9
Article No. index ....................................... 15/21
Fail-safe communication .............................

Fail-safe CPUs.............................................
Fail-safe I/O modules ..................................
Fail-safe special modules ...........................
Field PG M4.................................................
Front connectors .........................................
F-CM AS-i Safety ST for ET 200SP ..............
BaseUnits.................................................... 9/50
BusAdapters ............................................... 9/52
I/O modules................................................. 9/18

Index ......................................................... 15/19
Industry Services....................................... 15/12
Industry Services
for the entire life cycle ............................... 15/13
Information and Download Center ............ 15/11
Information and Ordering
in the Internet and on DVD........................ 15/10
Information on software licensing ............... 11/2
Interface modules ....................................... 9/59
Interface modules without CPU..................... 9/2
IM 155-6 ........................................................ 9/2
IM 155-5 DP ................................................ 9/59
IM 155-5 PN ................................................ 9/57
C
CE marking ................................................. 15/4
Central processing units ..... 3/2, 3/6, 3/10, 3/14,
............................................. 3/18, 4/2, 4/7, 4/10,
......................................................... 5/2, 6/2, 6/4
Certificates.................................................. 15/5
CM AS-i Master ST
for SIMATIC ET 200SP ................................ 9/30
CM 1241 communication modules ............. 3/40
CM 1542-1 .................................................. 4/38
Communication.................. 3/40, 4/36, 4/38, 6/5
Communications software ....... 12/6, 12/8, 12/9,
............................................. 12/11, 12/13, 12/15
Conditions of sale and delivery ................ 15/22
Connection system ..................................... 4/44
Controller Software inside TIA Portal . 11/3, 11/6
CP 1542-5 ................................................... 4/36
CP 443-1 RNA............................................... 6/5
CPU 1211C ................................................... 3/2
CPU 1212C ................................................... 3/6
CPU 1214C ................................................. 3/10
CPU 1215C ................................................. 3/14
CPU 1217C ................................................. 3/18
D
Development kits ........................................ 9/67
Digital F input modules ............................... 9/39
Digital F output module relay ...................... 9/43
Digital F output modules............................. 9/41
Digital input modules .................................... 9/7
Digital modules ......................... 4/15, 4/19, 4/25
Digital output modules................................ 9/12
E
Easy Motion Control.................................. 11/12
Embedded bundles/
Software packages ......................... 7/2, 7/5, 7/9
Enhanced Real-Time Ethernet
Controller ERTEC ........................................ 9/65
ET 200M...................................................... 9/61
ET 200MP........................................... 9/57, 9/59
ET 200pro ................................................... 9/63
ET 200SP ................... 9/2, 9/7, 9/12, 9/18, 9/27,
................................ 9/30, 9/33, 9/36, 9/39, 9/41,
........................ 9/43, 9/45, 9/47, 9/50, 9/52, 9/53
S
9/47
4/10
9/39
9/45
12/2
4/44
9/47
H
HARDNET-IE S7-REDCONNECT................. 12/8
L
LOGO! mounting kit ...................................... 2/2
M
Mobile Media............................................. 15/11
Modules for SIMATIC S7-400F/FH............... 6/12
O
Online Services ......................................... 15/10
OPC server for Industrial Ethernet ............ 12/13
Operator control and monitoring ................. 3/46
Options for diagnostics and service ........... 11/7
Options for engineering and
drive technology.................. 11/10, 11/11, 11/12
P
Partners at Industry Automation
and Drive Technologies............................... 15/6
PID Professional ........................................ 11/10
PROFINET components ............ 9/65, 9/67, 9/68
PROFINET Driver......................................... 9/68
Programming devices ................................. 12/2
Q
S7-Technology .......................................... 11/11

Siemens Automation Cooperates
with Education ................................... 15/8, 15/9
Siemens contacts worldwide ...................... 15/6
Siemens Industry Training .......................... 15/2
Siemens Solution Partner
Automation Drives ...................................... 15/7
SIMATIC ET 200S...................... 9/54, 9/55, 9/56
SIMATIC ET 200S 1 SI CANopen................ 9/56
SIMATIC ET 200S 1-STEP-DRIVE-5A-48V .. 9/55
SIMATIC HMI Basic Panels
(2nd Generation) ........................................ 3/46
SIMATIC IPC427D bundles........................... 7/2
SIMATIC IPC477D bundles........................... 7/5
SIMATIC Manual Collection ........................ 15/3
SIMATIC PDM ........................................... 11/13
SIMATIC S7-1200 CM CANopen ................ 3/48
SIPLUS add-ons ........................................... 2/2
SIPLUS analog modules .......... 3/32, 3/33, 3/34,
.......................................... 3/35, 3/36, 4/30, 4/31
SIPLUS CB 1241 RS485
communication board................................. 3/44
SIPLUS CM 1241
communication modules............................. 3/42
SIPLUS CM 1542-5 ..................................... 4/43
SIPLUS CM PtP........................................... 4/41
SIPLUS communication .................... 3/42, 3/44,
................................................... 3/45, 4/41, 4/43
SIPLUS CP 343-1 Advanced ...................... 5/17
SIPLUS digital modules .................... 3/21, 3/23,
................................................... 3/25, 4/27, 4/28
SIPLUS IM 153-1/153-2 .............................. 6/12
SIPLUS IM 153-1/153-2 .............................. 9/61
SIPLUS interface modules .......................... 9/61
SIPLUS load power supplies ...................... 4/46
SIPLUS LOGO! PROM.................................. 2/2
SIPLUS NET CSM 1277 .............................. 3/45
SIPLUS power supplies ............ 4/45, 4/46, 6/10
SIPLUS S7-300 analog modules........ 5/12, 5/14
SIPLUS S7-300 communication.................. 5/17
SIPLUS S7-300 digital modules........... 5/8, 5/10
SIPLUS S7-300 Ex analog input modules... 5/16
SIPLUS S7-300 Ex analog modules............ 5/16
SIPLUS S7-300 Ex digital input modules.... 5/15
SIPLUS S7-300 Ex digital modules............. 5/15
digital input modules .................................... 5/8
digital output modules ................................ 5/10
analog input modules ................................. 5/12
Quality management ................................... 15/5
15
15/19
Siemens AG 2014
Appendix
Index
analog output modules ............................... 5/14
SIPLUS S7-400 communication............. 6/7, 6/8
SIPLUS S7-400 CP 443-1 Advanced............ 6/8
SIPLUS S7-400 CP 443-5 Extended ............. 6/7
SIPLUS S7-400 CPU 414H ........................... 6/2
SIPLUS S7-400 CPU 416H ........................... 6/4
SIPLUS S7-400 power supplies.................. 6/10
SIPLUS SM 1221 digital input modules ...... 3/21
SIPLUS SM 1222 digital output modules.... 3/23
SIPLUS SM 1223
digital input/output modules ....................... 3/25
SIPLUS SM 1231 RTD signal modules ....... 3/36
SIPLUS SM 1231 thermocouple modules... 3/35
SIPLUS SM 1232 analog output modules... 3/33
SIPLUS SM 1234
analog input/output modules ...................... 3/34
SIPLUS SM 521 digital modules ................. 4/27
SIPLUS SM 522 digital modules ................. 4/28
SIPLUS SM 531 analog modules................ 4/30
SIPLUS SM 532 analog modules................ 4/31
SIPLUS SM 1231 analog input modules..... 3/32
SIPLUS Standard CPUs ................................ 4/7
SIPLUS system power supplies.................. 4/45
SIPLUS technology modules ...................... 4/35
15
15/20
SIPLUS TM Count 2x24V

counter modules ......................................... 4/35
SIPLUS upmiter ............................................. 2/2
SIWAREX WP231......................................... 3/38
SM 1231 RTD signal modules ..................... 3/29
SM 1231 thermocouple modules ................ 3/27
SM 1278 4xIO-Link Master.......................... 3/37
SM 521 digital input modules...................... 4/15
SM 522 digital output modules ................... 4/19
SM 523 digital input/output modules .......... 4/25
SNMP OPC server..................................... 12/15
Social Media.............................................. 15/11
SOFTNET for Industrial Ethernet ................. 12/9
SOFTNET for PROFIBUS............................. 12/6
SOFTNET PN IO ........................................ 12/11
Software for joint tasks
in the maintenance sector......................... 11/13
Software Licenses ..................................... 15/17
Software packages
for SIMATIC IPC and S7-mEC ....................... 7/9
Software Update Service............................. 11/2
Special modules................................. 3/37, 3/38
Standard CPUs.............................................. 4/2
Standards and approbations ...................... 15/4
STEP 7 (TIA Portal)...................................... 11/3
STEP 7 Safety (TIA Portal)........................... 11/6
T
Technology CPUs ......................................... 5/2
Technology modules................. 4/32, 9/33, 9/36
TM Count 1x24V counter module ............... 9/33
TM PosInput 1 counter
and position recording module................... 9/36
TeleService ................................................. 11/7
TM PosInput 2
position detection modules......................... 4/32
Y
with Industry Services. ........................... 15/12
Siemens AG 2014
Appendix
Article No. index
3R
6EP
3RK7136- .................................................... 9/49

3RK7137- ............................................. 9/6, 9/32
3RX9802- .................................................... 9/64
6EP1332- ............................ 4/5, 4/13, 9/58, 9/59

6EP1333- ............................ 4/5, 4/13, 9/58, 9/59
6AG1
6ES5710- ....................................................... 9/6

6ES5728- ..................................................... 3/39
6ES5734- ..................................................... 12/5
6AG10536AG10576AG11536AG11956AG12036AG12046AG12216AG12226AG12236AG12316AG12326AG12346AG12416AG12776AG13056AG13086AG13216AG13226AG13316AG13326AG13336AG13436AG14056AG14076AG14146AG14166AG14436AG15006AG15056AG15076AG15116AG15136AG15166AG15216AG15226AG15316AG15326AG15406AG15416AG15426AG15506AG15916AG19006AG19016AG19526AG1972-
...................................................... 2/2
...................................................... 2/2
.................................................... 9/62
.................................................... 9/62
...................................................... 2/2
...................................................... 6/9
.................................................... 3/22
.................................................... 3/24
.................................................... 3/26
.................................. 3/32, 3/35, 3/36
.................................................... 3/33
.................................................... 3/34
........................................... 3/43, 3/44
.................................................... 3/45
...................................................... 2/2
...................................................... 6/9
............................................. 5/9, 5/15
.................................................... 5/11
........................................... 5/13, 5/16
.................................... 4/9, 4/46, 5/14
............................................. 4/9, 4/46
.................................................... 5/18
.................................................... 6/11
.................................................... 6/11
...................................................... 6/3
...................................................... 6/4
............................................... 6/7, 6/9
............................................... 6/3, 6/4
............................................. 4/9, 4/45
............................................. 4/9, 4/45
...................................................... 4/9
...................................................... 4/9
...................................................... 4/9
.................................................... 4/27
.................................................... 4/29
.................................................... 4/30
.................................................... 4/31
.................................................... 4/42
.................................................... 4/42
.................................................... 4/43
.................................................... 4/35
...................................................... 4/9
.................................................... 5/18
............................................. 5/18, 6/9
............................................... 6/3, 6/4
...................................... 6/3, 6/4, 9/62
6AG4
6AG4140- ............................................... 7/3, 7/4
6AV
6AV21146AV21156AV21236AV21326AV63826AV66136AV66236AV66516AV72406AV7884-
...................................................... 7/9
...................................................... 7/9
.................................................... 3/47
.................................................... 3/47
...................................................... 7/9
.................................................... 12/5
...................................................... 7/9
.................................................... 3/47
............................................... 7/7, 7/8
.................................................... 7/10
6ES5
6ES76
6ES71
6ES7648- .................................................... 12/5

6ES7658- ................. 11/14, 11/15, 11/16, 11/17
6ES7671- ...................................................... 7/9
6ES77
6ES7131- .............................................. 9/5, 9/11

6ES7132- .............................................. 9/5, 9/17
6ES7133- .................................. 9/11, 9/17, 9/26,
......................................... 9/29, 9/35, 9/38, 9/40,
................................. 9/42, 9/44, 9/46, 9/51, 9/53
6ES7134- .............................................. 9/5, 9/26
6ES7135- .............................................. 9/5, 9/29
6ES7136- ..................... 9/5, 9/6, 9/40, 9/42, 9/44
6ES7137- ....................................................... 9/6
6ES7138- ............................................ 9/35, 9/38
6ES7144- ..................................................... 9/64
6ES7155- ............................ 9/5, 9/32, 9/58, 9/59
6ES7193- ...................................... 4/5, 4/13, 9/6,
......................................... 9/11, 9/17, 9/26, 9/29,
......................................... 9/32, 9/35, 9/38, 9/40,
......................................... 9/42, 9/44, 9/46, 9/49,
................................. 9/51, 9/52, 9/53, 9/58, 9/60
6ES7194- ..................................................... 9/64
6ES7195- ................................... 9/66, 9/67, 9/68
6ES72
6ES7211- ....................................................... 3/4
6ES7212- ....................................................... 3/8
6ES7214- ..................................................... 3/12
6ES7215- ..................................................... 3/16
6ES7217- ..................................................... 3/19
6ES7221- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7222- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7223- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7231- ............................. 3/4, 3/8, 3/12, 3/16,
................................................... 3/19, 3/28, 3/31
6ES7232- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7241- ............ 3/4, 3/8, 3/12, 3/16, 3/19, 3/41
6ES7274- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7278- ..................................................... 3/37
6ES7290- ............................... 3/4, 3/8, 3/9, 3/12,
................................................... 3/16, 3/17, 3/19
6ES7291- ............................. 3/4, 3/9, 3/12, 3/17,
................................................... 3/28, 3/31, 3/41
6ES7292- ..................... 3/4, 3/8, 3/12, 3/16, 3/19
6ES7297- ............................................ 3/16, 3/19
6ES7298- ............................. 3/5, 3/9, 3/13, 3/17,
.......................................... 3/20, 3/28, 3/31, 3/41
6ES73
6ES73156ES73176ES73916ES73926ES7398-
6ES7590- .......................... 4/5, 4/13, 4/18, 4/24,

.......................................... 4/26, 4/34, 9/58, 9/59
6ES7591- ............................................. 4/6, 4/14
6ES7592- ................ 4/18, 4/24, 4/26, 4/34, 4/44
....................................................... 5/6
....................................................... 5/6
....................................................... 5/7
................................................ 5/6, 5/7
....................................................... 5/6
6ES75
6ES7505- ..................................... 4/5, 4/13, 9/58
6ES7507- ..................................... 4/5, 4/13, 9/58
6ES7515- ....................................................... 4/5
6ES7516- ..................................................... 4/13
6ES7518- .............................................. 4/5, 4/13
6ES7521- ..................................................... 4/18
6ES7522- ..................................................... 4/24
6ES7523- ..................................................... 4/26
6ES7528- .................................. 4/18, 4/24, 4/26,
................................................... 4/34, 9/58, 9/59
6ES7551- ..................................................... 4/34
6ES77166ES77906ES77916ES7798-
.................................................... 12/4
.................................................... 12/5
.................................................... 12/5
.................................................... 12/5
6ES78
6ES7810- .................................... 6/6, 11/5, 12/5
6ES7822- ............................ 3/5, 3/9, 3/13, 3/17,
................................... 3/20, 4/6, 4/14, 11/4, 11/5
6ES7833- .................................... 4/14, 5/6, 11/6
6ES7842- .................................................... 11/9
6ES7860- .................................................. 11/10
6ES7864- ................................ 5/6, 11/11, 11/12
6ES79
6ES79006ES79016ES79126ES79536ES79546ES79726ES7998-
.................................................... 12/5
.................................... 5/6, 11/9, 12/5
...................................................... 5/6
...................................................... 5/6
.... 3/4, 3/8, 3/12, 3/16, 3/19, 4/5, 4/13
........... 4/5, 4/13, 4/37, 5/7, 9/60, 11/9
........................... 5/6, 9/6, 11/9, 15/15
6GK
6GK1161- ................................................... 12/8
6GK1162- ................................................... 12/8
6GK1182- .......................................... 9/66, 9/67
6GK1184- .......................................... 9/66, 9/67
6GK1500- ............................................ 4/37, 5/7
6GK1571- ..................................................... 5/7
6GK1704- ........... 12/6, 12/7, 12/9, 12/10, 12/12
6GK1706- ........................... 12/10, 12/14, 12/15
6GK1716- ................................................... 12/8
6GK1901- ........................... 4/5, 4/6, 4/13, 4/14,
............................ 4/40, 5/7, 9/6, 9/52, 9/58, 9/60
6GK1905- .......................... 4/5, 4/13, 4/37, 9/60
6GK1953- .......................................... 9/66, 9/67
6GK5204- ............................................ 4/40, 5/7
6GK5308- ................................................... 4/40
6GK7377- ..................................................... 5/7
6GK7443- ..................................................... 6/6
6GK7542- .......................................... 4/37, 4/40
6XV
6XV18306XV18316XV18406XV18506XV18706XV18736XV1878-
.................... 4/5, 4/13, 4/37, 5/7, 9/60

.................................... 4/5, 4/13, 9/60
............. 4/5, 4/6, 4/13, 4/14, 5/7, 9/58
.................................................... 3/39
.................................................... 4/40
...................................................... 5/7
.................................................... 4/40
7MH
7MH4702- ................................................... 3/39
7MH4710- ................................................... 3/39
7MH4960- .......................................... 3/38, 3/39
15/21
15
Siemens AG 2014
Appendix
Notes
15
15/22
Siemens AG 2014
Appendix
Notes
15
15/23
Siemens AG 2014
Appendix
Notes
15
15/24
Siemens AG 2014
Appendix
Notes
15
15/25
Siemens AG 2014
Appendix
Conditions of sale and delivery
1. General Provisions
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the
following Terms and Conditions of Sale and Delivery (hereinafter
referred to as "T&C"). Please note that the scope, the quality and
the conditions for supplies and services, including software
products, by any Siemens entity having a registered office
outside Germany, shall be subject exclusively to the General
Terms and Conditions of the respective Siemens entity. The
following T&C apply exclusively for orders placed with Siemens
Aktiengesellschaft, Germany.
1.1 For customers with a seat or registered office in
Germany
For customers with a seat or registered office in Germany, the
following applies subordinate to the T&C:
the "General Terms of Payment"1) and,
for software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or Registered Office in Germany"1) and,
for other supplies and services, the "General Conditions for
the Supply of Products and Services of the Electrical and
Electronics Industry"1).
1.2 For customers with a seat or registered office outside
Germany
For customers with a seat or registered office outside Germany,
the following applies subordinate to the T&C:
the "General Terms of Payment"1) and,
for software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or Registered Office outside of Germany"1) and
for other supplies and/or services, the "General Conditions for
Supplies of Siemens Industry for Customers with a Seat or
Registered Office outside of Germany"1).
2. Prices
15
The prices are in (Euro) ex point of delivery, exclusive of

packaging.
The sales tax (value added tax) is not included in the prices. It
shall be charged separately at the respective rate according to
the applicable statutory legal regulations.
Prices are subject to change without prior notice. We will charget
the prices valid at the time of delivery.
To compensate for variations in the price of raw materials (e.g.
silver, copper, aluminum, lead, gold, dysprosium and neodym),
surcharges are calculated on a daily basis using the so-called
metal factor for products containing these raw materials. A
surcharge for the respective raw material is calculated as a
supplement to the price of a product if the basic official price of
the raw material in question is exceeded.
The metal factor of a product indicates the basic official price
(for those raw materials concerned) as of which the surcharges
on the price of the product are applied, and with what method of
calculation.
An exact explanation of the metal factor can be downloaded at:
To calculate the surcharge (except in the cases of dysprosium
and neodym), the official price from the day prior to that on which
the order was received or the release order was effected is used.
To calculate the surcharge applicable to dysprosium and
neodym ("rare earths"), the corresponding three-month basic
average price in the quarter prior to that in which the order was
received or the release order was effected is used with a onemonth buffer (details on the calculation can be found in the
explanation of the metal factor).
15/26
3. Additional Terms and Conditions

The dimensions are in mm. In Germany, according to the
German law on units in measuring technology, data in inches
apply only to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the individual pages of this
catalog - especially with regard to data, dimensions and weights
given - these are subject to change without prior notice.
4. Export regulations
We shall not be obligated to fulfill any agreement if such
fulfillment is prevented by any impediments arising out of
national or international foreign trade or customs requirements
or any embargoes and/or other sanctions.
Export of goods listed in this catalog may be subject to licensing
requirements. We will indicate in the delivery details whether
licenses are required under German, European and US export
lists. Goods labeled with "AL" not equal to "N" are subject to
European or German export authorization when being exported
out of the EU. Goods labeled with "ECCN" not equal to "N" are
subject to US re-export authorization.
The export indications can be viewed in advance in the
description of the respective goods on the Industry Mall, our
online catalog system. Only the export labels "AL" and "ECCN"
indicated on order confirmations, delivery notes and invoices
are authoritative.
Even without a label, or with label "AL:N" or "ECCN:N", authorization may be required i .a. due to the final disposition and
intended use of goods.
If you transfer goods (hardware and/or software and/or
technology as well as corresponding documentation, regardless
of the mode of provision) delivered by us or works and services
(including all kinds of technical support) performed by us to a
third party worldwide, you must comply with all applicable
national and international (re-)export control regulations.
If required for the purpose of conducting export control checks,
you (upon request by us) shall promptly provide us with all information pertaining to the particular end customer, final disposition and intended use of goods delivered by us respectively
works and services provided by us, as well as to any export
control restrictions existing in this relation.
The products listed in this catalog may be subject to
European/German and/or US export regulations. Any export
requiring approval is therefore subject to authorization by the
relevant authorities.
Errors excepted and subject to change without prior notice.
1) The text of the Terms and Conditions of Siemens AG can be

downloaded at
Siemens AG 2014
Catalogs
Industry Automation, Drive Technologies and Low-Voltage Power Distribution
Further information can be obtained from our branch offices
listed at www.siemens.com/automation/partner
System Solutions for Industry
Interactive Catalog on DVD
Catalog
Products for Automation and Drives, Low-Voltage Power CA 01

Distribution and Electrical Installation Technology
Building Control
GAMMA Building Control
Drive Systems
SINAMICS G130 Drive Converter Chassis Units
SINAMICS G150 Drive Converter Cabinet Units
SINAMICS GM150, SINAMICS SM150
Medium-Voltage Converters
SINAMICS PERFECT HARMONY GH180
Medium-Voltage Air-Cooled Drives
Germany Edition
SINAMICS G180
Converters Compact Units, Cabinet Systems,
Cabinet Units Air-Cooled and Liquid-Cooled
SINAMICS S120 Chassis Format Units and
Cabinet Modules
SINAMICS S150 Converter Cabinet Units
SINAMICS DCM Converter Units
SINAMICS DCM Cabinet
SINAMICS and Motors for Single-Axis Drives
Three-Phase Induction Motors SIMOTICS HV,
SIMOTICS TN
Series H-compact
Series H-compact PLUS
Asynchronous Motors Standardline
Synchronous Motors with Permanent-Magnet
Technology, HT-direct
DC Motors
SIMOREG DC MASTER 6RA70 Digital Chassis
Converters
SIMOREG K 6RA22 Analog Chassis Converters
Digital: SIMOREG DC MASTER 6RM70 Digital
Converter Cabinet Units
SIMOVERT PM Modular Converter Systems
SIEMOSYN Motors
MICROMASTER 420/430/440 Inverters
MICROMASTER 411/COMBIMASTER 411
SIMOVERT MASTERDRIVES Vector Control
SIMOVERT MASTERDRIVES Motion Control
Synchronous and asynchronous servomotors for
SIMOVERT MASTERDRIVES
SIMODRIVE 611 universal and POSMO
ET G1
D 11
D 12
D 15.1
D 18.1
D 21.3
D 23.1
D 23.2
D 31
D 84.1
D 86.1
D 86.2
DA 12
DA 21.1
DA 21.2
DA 22
DA 45
DA 48
DA 51.2
DA 51.3
DA 65.10
DA 65.11
DA 65.3
DA 65.4
Note: Additional catalogs on SIMODRIVE or SINAMICS

drive systems and SIMOTICS motors with SINUMERIK
and SIMOTION can be found under Motion Control
Low-Voltage Three-Phase-Motors
SIMOTICS Low-Voltage Motors
MOTOX Geared Motors
SIMOGEAR Geared Motors
SIMOGEAR Gearboxes with adapter
D 81.1
D 87.1
MD 50.1
MD 50.11
Mechanical Driving Machines

FLENDER Standard Couplings
FLENDER High Performance Couplings
FLENDER SIG Standard industrial gear unit
FLENDER SIP Standard industrial planetary gear units
MD 10.1
MD 10.2
MD 30.1
MD 31.1
Process Instrumentation and Analytics

Field Instruments for Process Automation
Digital: SIPART Controllers and Software
Products for Weighing Technology
Digital: Process Analytical Instruments
Digital: Process Analytics,
Components for the System Integration
Digital: These catalogs are only available as a PDF
and/or as an e-book.
FI 01
MP 31
WT 10
PA 01
PA 11
Low-Voltage Power Distribution and

Electrical Installation Technology
Catalog
SENTRON SIVACON ALPHA

Protection, Switching, Measuring and Monitoring
Devices, Switchboards and Distribution Systems
Standards-Compliant Components for
Photovoltaic Plants
3WT Air Circuit Breakers up to 4000 A
Digital: 3VT Molded Case Circuit Breakers up to 1600 A
Digital: SIVACON System Cubicles, System Lighting
and System Air-Conditioning
Digital: ALPHA Distribution Systems
ALPHA FIX Terminal Blocks
SIVACON S4 Power Distribution Boards
Digital: SIVACON 8PS Busbar Trunking Systems
Digital: DELTA Switches and Socket Outlets
LV 10
Motion Control
SINUMERIK & SIMODRIVE
Automation Systems for Machine Tools
SINUMERIK & SINAMICS
Equipment for Machine Tools
SINUMERIK 840D sl Type 1B
SINUMERIK 808
SINUMERIK 828
SIMOTION, SINAMICS S120 & SIMOTICS
Equipment for Production Machines
Drive and Control Components for Cranes
LV 11
LV 35
LV 36
LV 50
LV 51
LV 52
LV 56
LV 70
ET D1
NC 60
NC 61
NC 62
NC 81.1
NC 82
PM 21
CR 1
Power Supply
Power supply SITOP
KT 10.1
Safety Integrated
Safety Technology for Factory Automation
SI 10
SIMATIC HMI/PC-based Automation

Human Machine Interface Systems/
PC-based Automation
ST 80/
ST PC
SIMATIC Ident
Industrial Identification Systems
ID 10
SIMATIC Industrial Automation Systems

Products for Totally Integrated Automation
SIMATIC PCS 7 Process Control System
System components
SIMATIC PCS 7 Process Control System
Technology components
Add-ons for the SIMATIC PCS 7
Process Control System
ST 70
ST PCS 7
ST PCS 7 T
ST PCS 7 AO
SIMATIC NET
Industrial Communication
IK PI
SIRIUS Industrial Controls

SIRIUS Industrial Controls
IC 10
Information and Download Center

Digital versions of the catalogs are available on the Internet at:
www.siemens.com/industry/infocenter
There youll find additional catalogs in other languages.
Please note the section Downloading catalogs on page
Online services in the appendix of this catalog.
Siemens AG 2014
Security information
Siemens provides products and solutions with
industrial security functions that support the
secure operation of plants, solutions, machines,
equipment and/or networks. They are important
components in a holistic industrial security
concept. With this in mind, Siemens products
and solutions undergo continuous development.
Siemens recommends strongly that you regularly
check for product updates.
For the secure operation of Siemens products
and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept)
and integrate each component into a holistic,
state-of-the-art industrial security concept. Thirdparty products that may be in use should also be
considered. For more information about industrial
security, visit
http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they
occur, sign up for a product-specific newsletter.
For more information, visit
http://support.automation.siemens.com.
Siemens AG
Industry Sector
Industrial Automation Systems
Postfach 48 48
90026 NRNBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice

Article No. E86060-K4670-A151-A7-7600
DR.PN.AS.14.XXKG.95.08 / Dispo 07900
KG 0514 3. AUM 272 En / IWI TSTJ
Printed in Germany
Siemens AG 2014
The information provided in this catalog contains merely general

descriptions or characteristics of performance which in case of
actual use do not always apply as described or which may change
as a result of further development of the products. An obligation to
provide the respective characteristics shall only exist if expressly
agreed in the terms of contract. Availability and technical
specifications are subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third parties
for their own purposes could violate the rights of the owners.

Siemens Simatic st70n Catalogue 2014-Eng PDF

Uploaded by

Copyright:

Available Formats

Siemens Simatic st70n Catalogue 2014-Eng PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Siemens Simatic st70n Catalogue 2014-Eng PDF

Uploaded by

Copyright:

Available Formats

Siemens AG 2014

Products for Totally

Answers for industry.

Only available in German

Products for Automation and Drives

The products and systems described in this

Refer to the Industry Mall for current updates

LOGO! logic module

SIMATIC PC-based controllers

SIMATIC ET 200 distributed I/O

SIMATIC control systems

Software for SIMATIC controllers

SIMATIC programming devices

Printed on paper from

Answers for industry.

The Siemens Industry Sector is the

We consistently rely on integrated technologies and, thanks to our bundled

Market launch times can be reduced by

Efficient automation starts with

A unique complete approach for all industries

Totally Integrated Automation

As one of the world's leading automation suppliers,

Making things right with Totally Integrated Automation

Totally Integrated Power:

Software tools, products, systems and

Products & Systems

Medium voltage with

Air conditioning system

Low voltage with

Planning Software Tools

The power supply system acts like a

Space requirements and budget calculation

The power distribution products and

Visualization of device characteristics

Get more information:

LOGO! logic module

LOGO! logic module

Overview SIPLUS LOGO! PROM

Overview LOGO! mounting kit

Front panel mounting kit

Width 4 width units, with keys

Width 8 width units

Width 8 width units, with keys

Overview SIPLUS upmiter

Programming device used to

The SIPLUS upmiter upstream device ensures reliable operation

SIPLUS upmiter upstream device

Output current 1.25 A

Output current 2.5 A (S7-200 style)

Output current 4 A (S7-300 style)

Central processing units

SIPLUS digital modules

SIPLUS analog modules

Operator control and monitoring

Permissible range: 20.4 to 28.8 V

Permissible range: 20.4 to 28.8 V

Permissible range: 20.4 to 28.8 V

CPU processing times

for word operations, typ.