Earthing

0
www.superimpex.com, www.aceelectricals.com
EARTH ROD & FITTINGS
COPPER BONDED GROUNDING ROD / EARTH ROD
ACE copper bonded earth rods are made from low carbon Steel.
Earth Rods are molecularly bonded with 99.9% pure electrolytic copper.
Salient Features* Perfectly Bonded rod will last longer, drive easier and will not crack.
* Corrosion resistance while providing the lowest resistance to ground.
* Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the roof of the
thread. Roll thread gives greater strength than cut thread.
* Thread rolling process raises the surface of the rod, so that thread dia. (T) is greater than shank dia. (S). As seen in figureDimension Rod Size
(DIA x LENGTH)
Actual Rod
Dia. S
Thread
Dia. T
9.5 x 1200 (UN - THREADED)

9.5 x 1800 (UN - THREADED
14 x 1200
14 x 1500
14 x 1800
14 x 2000
14 x 2400
5/8 x 4 or 16mm x 1200
5/8 x 5 or 16mm x 1500
5/8 x 6 or 16mm x 1800
5/8 x 8 or 16mm x 2400
5/8 x 10 or 16mm x 3000
5/8 x 4 or 16mm x 1200
5/8 x 5 or 16mm x 1500
5/8 x 6 or 16mm x 1800
9.5
9.5
12
12
12
12
12
14.2
14.2
14.2
14.2
14.2
16
16
16
3/4 x 4 or 19mm x 1200

3/4 x 5' or 19mm x 1500
3/4 x 6 or 19mm x 1800
3/4 x 8 or 19mm x 2400
3/4 x 10 or 19mm x 3000
25mm x 2400 (UN - THREADED)
25mm x 3000 (UN - THREADED)
Rod Dia.
S
Thread
Dia. T
Product Code
Solid Bonded
14
14
14
14
14
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
Product
Code Copper
Bonded
ABR - 012
ABR - 018
ABR - 1412
ABR - 1415
ABR - 1418
ABR - 1420
ABR - 1424
ABR - 112
ABR - 115
ABR - 118
ABR - 124
ABR - 130
ABR - 312
ABR - 315
ABR - 318
17.2
3/4
ABR - 212
ACRT - 212
17.2
17.2
17.2
17.2
25
25
3/4
3/4
3/4
3/4
-
ABR - 215
ABR - 218
ABR - 224
ABR - 230
ABR - 424
ABR - 430
ACRT - 215
ACRT - 218
ACRT - 224
ACRT - 230
ACRT - 424
ACRT - 430
ACRT - 012
ACRT - 018
ACRT - 1412
ACRT - 1415
ACRT - 1418
ACRT - 1420
ACRT - 1424
ACRT - 112
ACRT - 115
ACRT - 118
ACRT - 124
ACRT - 130
ACRT - 312
ACRT - 315
ACRT - 318
*Above Rod can also be made as per customer specification.

*UL listed Rods are minimum Dia. & 2400 mm in length.
Size
Product Code
14mm
AD - 14
5/8 or 16mm
3.4 or 19mm
1/2
AD - 16
AD - 19
AD - 12
DRIVING STUD
Material - High Tensile Steel
These are used to drive the Earth Rod to the Ground.
Re-usable many times. Suitable for Power Hammering.
COUPLER
Material Copper Alloy
Coupler are made from copper alloy &
counter bored to completely enclose
threads, protecting them from damage
& corrosion.
Size
14mm
5/8 or 16mm
3/4 or 19mm
Product
Code
AC - 14
AC - 16
AC - 19
305, Adhyaru Industrial Estate. Sun Mill Compound, Lower Parel (W), Mumbai 400 013. INDIA
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Email: [email protected]
Product Code
AL. BRONZE
ACA - 14
ACA - 16
ACA - 19
Page 2
SOLID COPPER ROD
ACE solid copper earth rods are made from 99.9% pure electrolytic
copper. Solid Copper rods offer greater resistance to corrosion.
They are ideally used in applications where soil conditions are very
aggressive. For eg. Soil with high salt content.
INTERNALLY THREADED
Rod DIA.
mm
12
12.5
14
14
15
15
16
16
20
20
Length
Thread
DIA
M8
M8
M10
M10
M10
M10
M10
M10
M12
M12
1200
1200
1200
1500
1200
1500
1200
1500
1200
1500
Product
Code
ACR - 1212
ACR - 12512
ACR - 1412
ACR - 1415
ACR - 1512
ACR - 1515
ACR - 1612
ACR - 1615
ACR - 2012
ACR - 2015
ACCESSORIES FITTINGS FOR SOLID COPPER ROD

Size
M8
M 10
M 12
Driving
Head
ADH - 8
ADH - 10
ADH - 12
Coupling
Dowell
ACD - 8
ACD - 10
ACD - 12
Driving Tip
ADT - 8
ADT - 10
ADT - 12
MACHANICALLY COPPER CLADED GROUNDING ROD

Mechanically copper claded grounding rod is made
when electrolytic grade 99.9% copper tube with
wall thickness of 0.25 (250 microns) is claded
0
to a low carbon steel rod. Even if the rod is bent by 45 ,
the copper tube should not peel out of the steel rod.
Rod Size
S
12
12
12
14
14
14
16
16
16
16
19
19
19
19
Length
Product Code
1200 (4 ft)
1800 (6 ft)
2400 (8 ft)
1200 (4 ft)
1800 (6 ft)
2400 (8 ft)
1200 (4 ft)
1800 (6 ft)
2400 (8 ft)
3000 (10 ft)
1200 (4 ft)
1800 (6 ft)
2400 (8 ft)
3000 (10 ft)
ACCR - 1412
ACCR - 1418
ACCR - 1424
ACCR - 112
ACCR - 118
ACCR - 124
ACCR - 312
ACCR - 318
ACCR - 324
ACCR - 330
ACCR - 412
ACCR - 418
ACCR - 424
ACCR - 430
GALVANISED STEEL EARTH ROD

Galvanised Steel Earth Rods are made up of high Strength low carbon
steel and hot dip galvanized. This design of the rod is actually cost
effective option for earthing.
*Above rod can also be supplied as per customer specification.
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Rod Size S
Length
1/2 / 12.5 mm
1/2 / 12.5 mm
1/2 / 12.5 mm
5/8 / 14.2 mm
5/8 / 14.2 mm
5/8 / 14.2 mm
3/4 / 17.2 mm
3/4 / 17.2 mm
1 / 23.1 mm
1500 (5 ft)
1800 (6 ft)
2400 (8 ft)
1800 (6 ft)
2400 (8 ft)
3000 (10 ft)
2400 (8 ft)
3000 (10 ft)
3000 (10 ft)
Product
Code
AGR - 1215
AGR - 1218
AGR - 1224
AGR - 1418
AGR - 1424
AGR - 1430
AGR - 1724
AGR - 1730
AGR - 2330
Page 3
EARTH ROD AND FITTINGS
STAINLESS STEEL UNTHREADED ROD
ACE stainless steel ground rods are used to overcome many of
the problems caused by galvanic corrosion which can take place
between dissimilar metals buried in close proximity. Other
advantage of stainless steel rod is that they are highly resistant to
corrosion and much more anodic than copper.
Diameter
Inches
MM
5/8
14.2
5/8
14.2
5/8
14.2
3/4
17.2
3/4
17.2
1.0
23.1
Length
Feet
M
5
1.5
8
2.44
10
3.05
5
1.5
10
3.05
10
3.05
Packing
Product
Code
10
10
10
5
5
1
ASSR - 145
ASSR - 148
ASSR - 1410
ASSR - 175
ASSR - 1710
ASSR - 2410
*Stainless Steel Rod can also be supplied in Internally Threaded.

CROSS EARTH ROD - WITH FLAG / WITHOUT FLAG

Cross Earth Rod, Hot Galvanised Steel with Holes of 11 mm or 13 mm.
Sizes
Length
50 x 50 x 3
50 x 50 x 3
50 x 50 x 3
50 x 50 x 3
50 x 50 x 3
1000
1500
2000
2500
3000
Product Code
With Flag
Without Flag
ACERF - 10
ACER - 10
ACERF - 15
ACER - 15
ACERF - 20
ACER - 20
ACERF - 25
ACER - 25
ACERF - 30
ACER - 30
T EARTH ROD
T Earth Rod with 2 holes of 13 mm.
Sizes
Length
Product Code
50 x 50 x 7
1550
ATER - 155
Sets of Hot Galvanised Bolts
(2Bolts M12 x 53mm, 2 Washers & 2 Nuts)
EARTH PLATE
Size (A x B x C)
600 x 600 x 1.5
500 x 500 x 1.5
600 x 600 x 3
900 x 900 x 3
500 x 500 x 3
Product
Code
A - 615
A - 515
A - 63
A - 93
A - 53
Size (A x B x
C)
600 x 600 x 1.5
600 x 600 x 3
600 x 600 x 5
500 x 500 x 3
500 x 500 x 5
900 x 900 x 3
900 x 900 x 5
1000 x 1000 x 3
1000 x 1000 x 5
Product
Code
AC - 615
AC - 63
AC - 65
AC - 53
AC - 55
AC - 93
AC - 95
AC - 103
AC - 105
EARTH PLATE - LATTICE COPPER

Size (A x B x C)
600 x 600 x 3
900 x 900 x 3
500 x 500 x 3
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Product Code
AL - 63
AL - 93
AL - 53
Page 4
FITTINGS
Copper alloy clamps are made from Bronze / Gunmetal / High Strength Copper Alloy body which give strong resistance to
corrosion.
Following are the range of clamps we offer- Fasteners are made from high strength Copper Alloy / Steel / Stainless Steel.
Earth Rod Clamp - (A Clamp Small)
Suitable For Rod Dia. 12 mm
Product Code - AAC - 1
O Clamp
Size
5/8/16
5/8/16
3/4/20
Max Cond.
Size
35
70
95
Product
Code
ACO - 1
ACO - 2
ACO - 3
Max Cond.
Size
26 x 12
40 x 12
51 x 12
Product
Code
ABC - 1
ABC - 2
ABC - 3
Rod To Tape Clamp - A Type

Size
5/8
5/8
5/8
Rod To Cable Clamp - G Type

Size
3/8/ 9.5
1/2/ 12
5/8/ 16
5/8/ 16
5/8/ 16
3/4/ 20
1/ 25
Max Cond. Size

35
50
35
70
95
95
120
Product Code
ACC - 1
ACC - 2
ACC - 3A
ACC - 3B
ACC - 3C
ACC - 4
ACC - 5
Rod To Cable Lug Clamp - B Type

Rod Dia.
3/8 / 9/5
5/8 / 16
3/4 / 20
Product Code
ADC - 1
ADC - 2
ADC - 3
Combination Clamps
Material - Hot Dip Galvanised Steel / Copper / Brass
Combination Clamp for Earth Round Bar & Tape
suitable to connect metal strap with maximum
width of 30 mm & round bar of 8 mm to 10 mm. 25 x M6 Bolts.
Brass Cable Clip

2
Used for connecting 13 mm rod to a Cable range of 6 - 16 mm
Product Code - ABCC - 1
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Page 5
U BOLT - CLAMP
Material Plate - Gunmetal / Brass
U Bolt - Copper / Copper Alloy / Stainless Steel
U Bolt - Rod Clamp
Nominal
Rod Dia.
5/8
3/4
1
1.1/4
1.1/2
2
Hole
Centres mm
37
37
37
43
54
64
Product
Code
AUU - 16
AUU - 20
AUU - 25
AUU - 32
AUU - 40
AUU - 50
Nominal
Rod Dia.
5/8 / 16
/ 20
1 / 25
Tape Size
mm
25
50
50
Product
Code
AURT - 16
AURT - 20
AURT - 25
Nominal
Rod Dia.
Conductor
Range mm2
16 - 95
16 - 70
70 - 185
70 - 150
Product
Code
U Bolt - Rod To Tape Clamp
U Bolt - Rod To Cable Clamp- GUV

These are used for Connecting Rod to
Cable.
Available with different Rod &
Cable size.
U Bolt - Rod To Cable Clamp - SCE

These are used for Connecting Rod to
Cable.
Available with different Rod & Cable size.
U Bolt For Rigid Pipe & Cables- PUB

These U Bolts are used for universal parallel
or 90 degree cable connection to rod or pipe.
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
5/8 / 16
3/4 / 20
5/8 / 16
5/8 / 20
Nominal
Rod Dia.
9.5
14
5/8/16mm
3/4/20mm
1/25mm
AURC - 1
AURC - 2
AURC - 3
AURC - 4
Conductor
Range mm2
6 - 35
16 - 95
16 - 95
70 - 300
70 - 185
Product
Code
AUCC - 1
AUCC - 2
AUCC - 3
AUCC - 4
AUCC - 5
Nominal
Rod Dia.
3/8
1/2
3/4
1 - 1/2
2
Product
Code
APUB - 38
APUB - 12
APUB - 34
APUB - 112
APUB - 2
Page 6
CROSS CLAMPS
Sizes
Cross Clamp for Earth Tape / Earth Round Bar / Earth Round Bar & Tape
Intermediate
Plate
with
without
with
without
60 x 60 x 2.5
60 x 60 x 2.5
60 x 60 x 2.5
60 x 60 x 2.5
Type - HOT DIP GALVANISED STEEL

HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25,
suitable to connectA) 8 mm or 10 mm Round Bars
B) Galvanised Plates with maximum width of 30 mm.
Material
Hot Galv. Steel
Hot Galv. Steel
Copper
Copper
Type - Copper
Copper Cross Clamp equipped with 4
Stainless Steel Screws & Nuts M8 x 25,
suitable to connect A) 8 mm or 10 mm Copper Round Bars
B) Copper Plates with Maximum width of 30 mm.
l Cross Clamp also available to connect Galv. Plate with 40 mm width.
l Cross Clamp also available in size 60 x 60 x 3 / 60 x 60 x 4.
l Cross Clamp also available of Stainless Steel on special request.
BONDS & CLAMPS

B Bond
Material - Gunmetal / Brass / Aluminium
These are used for bonding tape to steel structures.

Max. Tape
Width mm
25
25
Tower Earth Clamp

Material - Gunmetal / Brass
M10
M10
16
70
25
25
Bolt
Size
Conductor
Material
Product
Code
10
10
10
10
M10
M12
M10
M10
Copper
Copper
Copper
Aluminum
ATB - 16
ATB - 70
ATB - 25
ATB - 25A
70
120
50
50
These are used for bonding copper tape to Water main pipes.
Conductor
Material
Copper
Product
Code
AWB - 25
These are suitable for bonding tape to Rain Water Pipes, Handrails etc.
Max. Tape
Width mm
25
25
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Product
Code
AB - 25
AA - 25
Channel
Thickness
mm
Max. Tape
Width mm
25
Rain Water Pipe Bond

Conductor
Material
Copper
Aluminium
These are suitable for bonding copper cable or wire to steel structures.
Cond. Size
mm2
Min.
Max.
Watermain Bond
Bolt Size
Bolt
Size
M10
M10
Conductor
Material
Copper
Aluminium
Product
Code
ARW - 25
AAW - 25
Page 7
Earth Boss
Material Body - Mild Steel
Fittings - Stainless Steel
The Earth boss is designed to provide an
earth point on a steel structure.
The boss is welded into place.
Thread
Size
M10
M10
Length
Diameter
40 mm
50 mm
40 mm
50 mm
Product
Code
APB - 01
APB - 02
FLAT TAPE SYSTEMS

Taper Pointed Rod
Material - Electrolytic Copper / Aluminum
Air Rod can be installed with or without Multiple Point
Aerial Elevation Rod

Material - Electrolytic Copper / Aluminum
Air Rod can be installed with or without Multiple Point
Rod
Dia.
Thread
Dia.
Length of
Rod
500
1000
2000
500
Product Code
Taper Pointed
Rod
AAE - 5
AAE - 10
AAE - 20
AAE - 5A
Product Code
Aerial
Elevation Rod
AER - 5
AER - 10
AER - 20
AER - 5A
15
15
15
17.2
5/8
5/8
5/8
3/4
17.2
17.2
3/4
3/4
1000
2000
AAE - 10A
AAE - 20A
AER - 10A
AER - 20A
Multiple Point
Material - Copper / Gunmetal / Brass
Multiple Point is used with Elevation rod.
Terminal Saddle Base

Material - Gunmetal / Brass / Aluminum
Used for supporting lightning conductor Air Terminals.
Rod Dia.
mm
16 - 5/8
19`` - 3/4
Thread Dia.
mm
5/8" / 16
3/4" / 17.2
Max. Cond.
Width mm
25
25
Product Code
Terminal Base
ALD - 1625
ALD - 2025
Aerial Rod + Multiple Point + Terminal Base
Aerial Rod + Terminal Base
Product Code :
AMPT 16 (for 5/8 / 16mm)
AMPT 19 (for 3/4 / 19mm)
Product Code :
ARTB - 16 (for 5/8 / 16mm)
ARTB 19 (for 3/4 / 19mm)
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Product
Code
AMP - 16
AMP - 20
Product Code
Ridge Saddle
ARDS - 1625
ARDS - 2025
Page 8
TAPE FIXINGS
Tape Clip
Material - Copper / Brass / Aluminum
These are used with Bare Copper Tape. Used to
support Tape to structure
Conductor
Size mm
20 x 3
25 x 3
50 x 6
Product Code
DC Tape Clip
These are used with
Bare Copper Tape Conductor.
Used to secure Tape to structure.
Conductor
Size MM
20 x 3
25 x 3
Product Code
25 x 4
25 x 6
40 x 3
40 x 6
50 x 3
50 x 6
ADTC - 254
ADTC - 256
ADTC - 403
ADTC - 406
ADTC - 503
ADTC - 506
Square Tape Clamp

These are suitable for 4 Way Connections,
Straight, Through or Tee Joints for Copper
Tape.
Oblong Test Clamp

These are used with Bare Copper Tape.
Suitable for straight through tape joint
Plate Type Test Clamp / Test Bond

Material - Gunmetal / Brass / Aluminium
These are used for 4 way Copper
Tape Connection.
Screwdown Test Clamp

These are used for fixing 2 Way
Copper Tape.
Glazing Bar Holdfast

These are secured to Glazing
Bar, Steel Frame, Girdeles etc.
The Item is designed for use with
appropriate size of metallic or nonmetallic conductor fixing.
Conductor
Size mm
25 x 3
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
ATC - 203
ATC - 253
ATC - 506
ADTC - 203
ADTC - 253
Size
Product Code
25 x 3
25 x 4
25 x 6
50 x 6
ASTC - 253
ASTC - 254
ASTC - 256
ASTC - 506
Conductor
Size mm
25 x 3
40 x 6
50 x 6
Product Code
Tape Size
mm
25 x 3
Product Code
Conductor
Size mm
25 x 3
Product Code
Max. Glazing
Bar Width mm
12
Product
Code
AGBH - 12
AOT - 253
AOT - 406
AOT - 506
ATBC - 253
ASDTC - 253
Page 9
Back Plate Holdfast Stem
Product Code ABPH - 12
For use with appropriate DC Tape Clip.
It is used when the installation requires the tape
to be secured 75 mm away from the face of the wall.
Rod to Tape Coupling

Used to secure elevation rod by
means of a bolted connection.
Air Rod
Dia. mm
15
15
17.2
17.2
Cable to Tape Junction Clamp

These are used for connecting
Copper Tape to Cable.
Thread
Dia. mm
5/8" / 16
5/8" / 16
3/4" / 19
3/4" / 19
Rod
Material
Copper
Aluminium
Copper
Aluminium
Product
Code
ART - 16C
ART - 16A
ART - 19C
ART - 19A
Tape Size
mm x mm
25 x 3
Cable Size
mm2
50
Product
Code
ACTJ - 253
Conductor Dia.
Product
Code
Bi-Metallic Connector
Material - Aluminium / Copper Fasteners - Brass / Copper / Stainless Steel
These are used for joining
Aluminium & Copper Tape,
circular conductors, particularly,
when Copper is used as earthing
in Aluminium lightning protection
systems.
Cast Ground Plate or Earth Plate

These Plates when used in concrete structures offer convenient
ground system connection point. They are used where reinforcing bars are
electrically continous & are to be used as down conductors. These earth
points allow easy access for the lightning protection & earthing system.
8 mm Dia. Al
to 8 mm Dia. Cu
8 mm Dia. Al
to 25 x 3 Cu tape
20 x 3 Al Tape
to 25 x 3 Cu Tape
20 x 3 Al Tape
to 25 x 3 Cu Tape
Drwg.
No.
A
B
B
C
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Cond.
Size
120
120
240
240
ABI - 8
ABI - 825
ABI - 203
ABI - 253
Hole
Product Code
2 Hole
4 Hole
4 Hole
4 Hole
ACCP - 2120
ACCP - 4120
ACCP - 4240
ACCPL - 4240
Page 10
CIRCULAR CONDUCTOR SYSTEM
One Hole Cable Clip
Material - Electrolytic Copper
These are recommended to fix
cable conductors.
Heavy Duty Cast Cable saddle

These are used with 8 mm
conductor or for supporting Air
Terminals when used in
conjuction with wall mounted
Air Terminal base.
For Solid Conductor

Size
mm
8
10
Product
Code
AOH - 8
AOH - 10
12
16
AOH - 12
AOH - 16
For Solid Conductor

Size
MM
8
10
Product
Code
ADCC - 8
ADCC - 10
12
16
ADCC - 12
ADCC - 16
Test Clamp
Used in overlapping joints
.
Square Conductor Clamp

Suitable for 4 way connection,
straight, through or tee joints for
Round Conductors.
Tee Clamp
These are used for forming &
bonding Tee joint for conductor.
Side Mounting Rod Bracket

Above Bracket provides a 75 mm projection
from the face of a wall.
Manufactured either in Gunmetal or Brass.
Jointing Clamp
These are used for forming straight through
joints.
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
For Stranded
Conductor
Size
Product
mm2
Code
50
AOH - 50
70
AOH - 70
95
-
AOH - 95
-
For Stranded
Conductor
Size
Product
mm2
Code
50
ADCC - 50
70
ADCC - 70
95
-
ADCC - 95
-
Conductor Size
mm2
50
70
95
Product Code
Conductor Size
mm2
35
50
70
95
Product Code
Conductor Dia.
mm
8 Cu
8 Al
Product Code
Air Rod Dia.

mm
16
20
Product Code
Conductor Dia.
mm
8 Cu
8 Al
Product Code
ATC - 50
ATC - 70
ATC - 95
ASCC - 35
ASCC - 50
ASCC - 70
ASCC - 95
ATEC - 8C
ATEC - 8A
ASM - 16
ASM - 20
AJC - 8C
AJC - 8A
Page 11
Universal Cable Connector
Material - Stainless Steel / Brass
These are used for connecting Cable
Conductors
Re-Bar Clamp
Used for bonding to handrails, re-inforcing
bars, pipes etc.
Conductor
Size mm
70
95
120
Conductor
Dia.
8mm
Pipe Dia.
8mm
Product
Code
AUCC - 70
AUCC - 95
AUCC - 120
8 - 18mm
Conductor
Material
Copper
Product
Code
ARBC - 818
8 - 38mm
Copper
ARBC - 838
Conductor Size
Product Code
8mm2
AMWB - 8
Conductor Size
Product Code
8mm2
ASCS - 8
Metalwork Bonding Clamp

Material - Copper / Aluminum
Product Code - AMWBC - 1
Used for bonding circular conductors
to metal surfaces. These can be fixed
to the metal surface by using bolts &
nuts or by welding onto the metal surface.
Metalwork Bond
Used for connecting to all types of metal
structures upto 13mm thickness.
Straight Setscrew Type Cable Socket

Used for Bonding Copper &
Aluminum Conductors to steel work.
Air Terminal Base - Cable

Used for mounting of air rods either
horizontally or vertically.
Flat Saddle - C
Material - Gunmetal
Used for supporting taper
pointed or blunt air rods with
circular conductors on flat surface.
Position
Vertical
Horizontal
Rod
Length
(mm)
50
70
95
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Conductor
Dia.
8 mm
8 mm
Thread
Dia.
10 mm
10 mm
Product
Code
ATBV - 810
ATBH - 810
Rod Dia.
(mm)
Thread
Dia.
Product
Code
15
15
15
16
16
16
AFSC - 50
AFSC - 70
AFSC - 95
Page 12
Anti - Vandal Conductor Guard
Brass Comb Clamp

Material - Brass / Copper Alloy
Nero Clip - Snap On Holder

(for attaching wire to wall)
Snap - on mechanism & Base Made of Metal.
Type AFL: Fixed conductor holder.
Type AIL: Loose conductor holder.
Specification Snap - on Mech /

Base
Stainless Steel / Stainless Steel
Universal Clamp
Universal use as T, Cross, Parallel & Thrust
Clamp
3000
ACG - 30
Type
Dia. in
mm
7.0
7.0
Size mm
8.0 Type AFL
8.0 Type AIL
Product
Code
ANC - 1
ANC - 2
7.0
7.0
M6
M6
M6
M6
8.0 Type AFL

8.0 Type AIL
8.0 Type AFL
8.0 Type AIL
8.0 Type AFL
8.0 Type AIL
ANC - 3
ANC - 4
ANC - 5
ANC - 6
ANC - 7
ANC - 8
Product Code
Galvanized Steel
Stainless Steel
Copper
Size
10/50
25/120
70/150
150/240
240/400
Product
Code
ACMP - 1
ACMP - 2
ACMP - 3
ACMP - 4
ACMP - 5
ACMP - 6
ACMP - 7
ACMP - 8
1 Bolt
1 Bolt
1 Bolt
2 Bolt
2 Bolt
2 Bolt
2 Bolt
2 Bolt
Specification
Saddle Clamp With Base

Material - Brass / Copper /
Aluminium
Clamp Connector - 90
Material - Brass
Product Code
Conductors
mm
3-5
6-8
9 - 12
3-5
6-8
9 - 12
12 - 14
14 - 16
Stainless Steel Coppered / Copper

Clamp Connector Straight

Material - Brass
Length mm
AUC - 23
AUC - 24
AUC - 25
Sizes
Type
Product Code
8.0 - 10.0
16.0
7.0
7.0
A
A
B
B
ANT - 019
ANT - 020
ASC - 003
ASC - 004
Rod
Min.
10
16
25
120
240
Cable
Max.
70
120
150
240
400
Product Code
Max.
10
14
16
20
24
Product Code
Min.
Max.
Cable
Min.
Max.
4
6
10
14
Min.
4
6
10
14
20
ACCS - 70
ACCS - 120
ACCS - 150
ACCS - 240
ACCS - 400
Size
10/50
25/120
Rod
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
10
16
70
120
ACCD - 70
ACCD - 120
Page 13
Mechanical Connector for Copper Cable Straight
Material Brass
Size
Min.
Rod
Max.
Min.
Max.
Product
Code
4
6
10
10
14
16
10
16
25
70
120
150
AMCS - 70
AMCS - 120
AMCS - 150
10/50
25/120
70/150
Cable
Mechanical Connector For Copper Cable - 90

Material - Brass
T Rail + Base
Roof Conductor Holder With Niro-clip

(For attaching wire to wall)
Fits all the sizes, universally adjustable
wire attachment.
Size
Rod
Min.
Max.
Cable
Min.
Max.
Product
Code
10/50
25/120
4
6
10
14
10
16
70
120
AMCD - 70
AMCD - 120
70/150
10
16
25
150
AMCD - 150
Rail + Base
Specification
Steel / Galvanised / Varnished
Stainless steel
Copper
Stainless Steel
Copper
Rail
Holder
Sizes in mm
Product Code
Niro - Clip
Niro - Clip
Niro - Clip
Niro - Clip
Stainless Steel
Stainless Steel
8.0 Type AFL

8.0 Type AIL
8.0 Type AFL
8.0 Type AIL
8.0 Type AFL
8.0 Type AFL
ANC - 011
ANC - 012
ANC - 013
ANC - 014
AURCH - 01
AURCH - 02
Plastic
Plastic
8.0 Type AIL

8.0 Type AIL
AURCH - 03
AURCH - 04
Conductor
Copper
Aluminium
Product Code
APEC - 01
APFA - 02
Type AFL: Fixed conductor holder / Type AIL: Loose conductor holder.
Puddle Flange
Material - Copper / Aluminium
For taking Lightning Conductors
through roofs etc.
Floor Ground Receptacles

Material - Bronze / Copper Alloy.
Floor Ground Receptacle of Heavy Duty Construction.
Receptacle furnished for all size Ground Rods, either
plain or threaded.
Size
Product Code
1/2
5/8
AFGR - 12
AFGR - 16
AFGR - 20
Equipotential Bonding Bars

Equipotential Bonding Bar with Plastic & Base suitable
for connecting.
Specifications With Plastic Cover & Base
1 Tape Terminal 30 x 5mm or Conductors 8-10mm2.
7 x one or multi - wired conductors to 6mm2 to 25mm2.
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Page 14
EARTH BARS & DISCONNECTING LINKS
Earth Bars
Description
Length in mm
Width in mm
Height in mm
Product Code
6 way
8 way
10 way
400
500
650
90
90
90
90
90
90
ADL - 6
ADL - 8
ADL - 10
12 way
750
90
90
ADL - 12
Description
Length in mm
Width in mm
Height in mm
Product Code
6 way
8 way
10 way
12 way
475
575
725
825
90
90
90
90
96
96
96
96
ADL - 6S
ADL - 8S
ADL - 10S
ADL - 12S
Width in
mm
90
90
90
90
Height in
mm
96
96
96
96
Product
Code
ADL - 6T
ADL - 8T
ADL - 10T
ADL - 12T
Earth Bars With Single Disconnecting Link
Earth Bars With Twin Disconnecting Link
Description
6 way
8 way
10 way
12 way
Length in
mm
550
650
800
900
Accessories
Description
*All above products of 50 x 6 mm
copper bar.
Other Sizes available on request.
Earth Bars for Earth Housing

Earth Bars made of hard drawn copper are used for fitting into
slots provided in the earth housings where multiple connections
are required to the earth rod.
Disconnecting
Link
Holes
5
7
5
7
5
7
Length
in mm
Width in
mm
Height in
mm
Product
Code
125
90
90
ADL - 11
Length in
mm
300
300
250
250
203
203
INSULATOR
Colors: Cherry Red, White, Grey
Brown
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Width in
mm
31
31
31
31
25
25
Thickness
in mm
6
6
6
6
6
6
Product
Code
AEBEH - 5A
AEBEH - 7A
AEBEH - 5B
AEBEH - 7B
AEBEH - 5C
AEBEH - 7C
Size (H)
Threaded Size
Product Code
40
M 10
AISU - 4010
Page 15
CONDUCTORS
Bare Copper Tape
Material - High conductivity Copper Tape to BS EN 13601
(Formerly BS 1432)
Conductor
Size mm
12.5 x 1.5
12.5 x 3
20 x 1.5
20 x 3
25 x 1.5
Product
Code
AT - 1215
AT - 1253
AT - 2015
AT - 203
AT - 2515
Conductor
Size mm
30 x 6
38 x 3
38 x 5
38 x 6
40 x 4
Product Code
25 x 3
25 x 4
25 x 6
30 x 3
AT - 253
AT - 254
AT - 256
AT - 303
40 x 6
50 x 3
50 x 4
50 x 6
AT - 406
AT - 503
AT - 504
AT - 506
AT - 306
AT - 383
AT - 385
AT - 386
AT - 404
*Add suffix "T" to the product code for "Tinned Copper Tape".
PVC Covered Copper Tape
Material Electrolytic Copper
Bare Aluminum Tape

Material - Aluminum
Copper Bus Bar (Hard Drawn / Soft Drawn / Half Hard)

Material High Conductivity Copper Bar
* Lengths as per clients request.
* Tinned Copper Bus Bar also available.
* Add suffix T to the product code for Tinned Copper

Bus Bar
Conductor
Size mm
12 x 3
20 x 3
20 x 5
25 x 3
25 x 4
25 x 5
25 x 6
30 x 5
31 x 25
38 x 3
38 x 4
38 x 6
40 x 3
40 x 5
40 x 6
40 x 10
50 x 5
Conductor
Size mm
12.5 x 1.5
25 x 3
25 x 6
38 x 6
50 x 6
Product Code
Conductor Size
mm
12.5 x 1.5
25 x 3
25 x 6
38 x 6
50 x 6
Product Code
Product
Code
ADCB - 123
ADCB - 203
ADCB - 205
ADCB - 253
ADCB - 254
ADCB - 255
ADCB - 256
ADCB - 305
ADCB - 3125
ADCB - 383
ADCB - 384
ADCB - 386
ADCB - 403
ADCB - 405
ADCB - 406
ADCB - 4010
ADCB - 505
APT - 1215
APT - 253
APT - 256
APT - 386
APT - 506
AAT - 1215
AAT - 253
AAT - 256
AAT - 386
AAT - 506
Conductor
Size mm
50 x 6
50 x 10
50 x 12
60 x 5
60 x 8
60 x 10
75 x 6
75 x 10
75 x 12
80 x 5
80 x 6
80 x 10
80 x 12
100 x 5
100 x 6
100 x 10
100 x 20
Product
Code
ADCB - 506
ADCB - 5010
ADCB - 5012
ADCB - 605
ADCB - 608
ADCB - 6010
ADCB - 756
ADCB - 7510
ADCB - 7512
ADCB - 805
ADCB - 806
ADCB - 8010
ADCB - 8012
ADCB - 1005
ADCB - 1006
ADCB - 1010
ADCB - 1020
Dia. (D)
mm
8
Cross Section
Area MM2
50.27
Product
Code
ABSC - 8C
50.27
ABSC - 8A
50.27
APSC - 8C
50.27
APSC - 8A
Bare Solid Circular Conductor

Conductor
Bare Copper
Bare
Aluminum
PVC Copper
PVC
Aluminum
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Page 16
Bare Stranded Copper Conductors
Soft Drawn Cu Conductor to BS EN - 60228
PVC Covered Stranded Copper Conductors

PVC Covered Soft Drawn Cu Conductor to BS - 6004
Flexible Braid Bond

Material - Copper
Copper Flexible Braids are used for bonding gates, doors,
fences etc.
Flexible Copper Braid

High Conductivity Copper Wire
Suitable for earth bonding. Also supplied as standard
drilled & pre-cut bonds.
Customer specific sizes & types of braid can be
manufactured on order.
* Tinned Copper Flexible Braid also available
* Add suffix T to the Product Code for Tinned Copper
Flexible Braid
Please call our office for details.
Size MM
Stranding No
/ mm
7 / 1.04
7 / 1.70
7 / 2.14
Product Code
35
50
70
95
120
150
185
7 / 2.52
19 / 1.78
19 / 2.14
19 / 2.52
37 / 2.03
37 / 2.25
37 / 2.52
ABCU - 35
ABCU - 50
ABCU - 70
ABCU - 95
ABCU - 120
ABCU - 150
ABCU - 185
Size
MM2
16
25
35
50
70
95
120
150
185
240
300
400
Stranding No
/ mm
7/1.7
7/2.14
7/2.52
19/1.78
19/2.14
19/2.52
37/2.03
37/2.25
37/2.52
61/2.25
61/2.52
61/2.85
Product Code
Hole Size
MM
25 x 3.5
25 x 3.5
Cross
Section
Area
35 mm2
35 mm2
25 x 3.5
35 mm2
12
12
12
ABCU - 6
ABCU - 16
ABCU - 25
APCU - 16
APCU - 25
APCU - 35
APCU - 50
APCU - 70
APCU - 95
APCU - 120
APCU - 150
APCU - 185
APCU - 240
APCU - 300
APCU - 400
Hole
Centre
MM
200
300
400
Product
Code
AFB - 252
AFB - 253
AFB - 254
Overall Nominal
Equivalent Size
mm
12 x 1.5
Size mm2
Product Code
8.4
ABB - 1215
12 x 3
15 x 1.4
19 x 1.5
19 x 3.0
25 x 1.5
25 x 3.5
25 x 6
32 x 1.5
32 x 3
32 x 6
38 x 3
38 x 6
16.8
8.75
12.1
22.4
19.6
34.7
73
36.5
42.1
81.4
53.3
80
ABB - 123
ABB - 1514
ABB - 1915
ABB - 1930
ABB - 2515
ABB - 2535
ABB - 256
ABB - 3215
ABB - 323
ABB - 326
ABB - 383
ABB - 386
50 x 3
50 x 6
50 x 12
75 x 6
70.2
109.5
280
140.4
ABB - 503
ABB - 506
ABB - 5012
ABB - 756
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Size
MM2
6
16
25
Page 17
EC-SAT / T Series
EC-SAT
EC-SAT
EC-SAT 750
500
1000
Stainless Steel AISI 316 (18/8/2) Internat. Norm
Stainless Steel UNE 36-016-75 Spanish norm
Poiletaflouretilence
With Capsule in resin
Generates high voltage impulses
EC-SAT 250
Manufacturing Material
Insulating
Isolation
Electric Generator Transformer
Electronics
Energetic block in a capsule
Spark Gap
Number of Spark Gaps
Faradise Protection
Total Length (mm)
Energetic Block Length (mm)
Total Diameter (mm)
Weight (kg)
Double (normal and controlled atmosphere)

2
2
2
2
With metallic external housing
800
800
800
800
100
110
114
118
170
170
170
170
4.5
4.5
4.8
5.0
It doesnt need external supply conventional.
Only the atmosphere gradient.
Electro Condenser with triggering device
WAVE 10/350 s
Supply Energy
EC-SAT Symbol
Current Test 100KA
*Fields marked in Red are same for both EC-SAT and T SERIES
Number of Spark Gaps
TA
2
Total Length (mm)

Energetic Block Length (mm)
Total Diameter (mm)
Weight (kg)
625
75
148
4.2
--Norms
TT
2
TI
2
625
625
625
75
80
80
148
148
148
4.2
4.2
4.2
UNE 21185 / 21186 / 21308
NF 17102 / TELEFONICA / CEI - 1024
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
TO
2
TL
2
625
90
148
4.2
Page 18
FASTENERS AND FIXINGS
Round Head Rivets
Round Head Copper Nails
Hexagon Nuts
Hexagon Head Set Screws
Counter Wood Screws
Plastic Wall Plugs
Plain Washers - Spring Washers
Tel.: 00-91-22-24905100 / 6634 0200 / 6661 5090 - 91 Fax: 00-91-22-2490 5200 / 6634 1933
Page 19

Earthing

Uploaded by

Copyright:

Available Formats

Earthing

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Earthing

Uploaded by

Copyright:

Available Formats

0

9.5 x 1200 (UN - THREADED)

3/4 x 4 or 19mm x 1200

*Above Rod can also be made as per customer specification.

ACCESSORIES FITTINGS FOR SOLID COPPER ROD

MACHANICALLY COPPER CLADED GROUNDING ROD

*UL listed Rods are minimum Dia. & 2400 mm in length.

GALVANISED STEEL EARTH ROD

*Above rod can also be supplied as per customer specification.

*Stainless Steel Rod can also be supplied in Internally Threaded.

CROSS EARTH ROD - WITH FLAG / WITHOUT FLAG

EARTH PLATE - LATTICE COPPER

Rod To Tape Clamp - A Type

Rod To Cable Clamp - G Type

Max Cond. Size

Rod To Cable Lug Clamp - B Type

Brass Cable Clip

U Bolt - Rod To Tape Clamp

U Bolt - Rod To Cable Clamp- GUV

U Bolt - Rod To Cable Clamp - SCE

U Bolt For Rigid Pipe & Cables- PUB

Type - HOT DIP GALVANISED STEEL

BONDS & CLAMPS

These are used for bonding tape to steel structures.

Tower Earth Clamp

Rain Water Pipe Bond

FLAT TAPE SYSTEMS

Aerial Elevation Rod

Terminal Saddle Base

Aerial Rod + Multiple Point + Terminal Base

Aerial Rod + Terminal Base

Square Tape Clamp

Oblong Test Clamp

Plate Type Test Clamp / Test Bond

Screwdown Test Clamp

Glazing Bar Holdfast

Rod to Tape Coupling

Cable to Tape Junction Clamp

Cast Ground Plate or Earth Plate

Heavy Duty Cast Cable saddle

For Solid Conductor

For Solid Conductor

Square Conductor Clamp

Side Mounting Rod Bracket

Air Rod Dia.

Metalwork Bonding Clamp

Straight Setscrew Type Cable Socket

Air Terminal Base - Cable

Brass Comb Clamp

Nero Clip - Snap On Holder

Specification Snap - on Mech /

8.0 Type AFL

Saddle Clamp With Base

Stainless Steel Coppered / Copper

Clamp Connector Straight

Mechanical Connector For Copper Cable - 90

Roof Conductor Holder With Niro-clip

8.0 Type AFL

8.0 Type AIL

Floor Ground Receptacles