Bucket Elevator

BUCKET ELEVATORS
Looking for strength and durability

to ally your system?
Riley trunking flanges are welded solid
inside and outside. Ask about powder
coating for additional durability.
Is smooth installation at the top of
your priority list?
Keep your millwrights happy; all Riley
trunking components are fixture welded
to ensure quick and easy construction
in the field.
Want to keep your belts running
smooth with proper tension?
Rileys gravity take-up boots are
offeredin 18, 24 and 30 pulleys as
well as 36, 42 and 48 (which are the
only three the competition offers).
Need an upgrade to keep your
service guys off the platform?
No charge here! Riley bucket elevators
are all equipped with pillow block
bearings for best efficiency, longest life
and maximum radial loads.
Safety a priority for you?
Riley head platforms wrap around
the front of the head, giving ample
clearance for service and inspection.
Need reliable support?
Our technical team is available 24/7
during peak season. High quality
equipment and service is our standard.
Riley Equipments bucket elevator line

is designed with the user in mind
commercial and farm-duty are available
in painted, powder coated, galvanized
or stainless steel finish. Built for easy
seasonal maintenance, standard items
are in place for safety precautions, and
each weld is quality checked for optimal
performance.
We arm our equipment with the highest
quality buckets in the industry
assuring performance and satisfaction.
The Riley design offers 4 tall removable
doors on both sides of the up casing for
quick installation and maintenance of
belting and buckets. Large, conveniently
placed access doors provide seamless
inspection and service. Access doors
are located at the boot, discharge and
pulley lagging area. A safety cable is
standard on all head access doors.
Heavy-duty motor mounts with torque

arm anchorage points are standard
on all Riley bucket elevators. UHMW
shaft seals are also standard, keeping
moisture out and dust in. Industry-best
hardware and craftsmanship keeps our
equipment performing at optimal levels
for years on end.
Riley offers
standard
bucket
elevators up
to 60,000
bph, and
custom sizes
are available
to meet your
specific need.
WWW.RILEYEQUIPMENT.COM 8128865500
Bucket_Elev_212.indd 1
2/27/2012 5:59:35 PM
Main Bucket Elevator Features:

Elevators can be built of stainless steel,
galvanized steel, painted steel or powder
coat finish.
Shaft made of #1045, turned, ground and
polished steel. Boot shafts are drilled and
tapped for optional motion monitor.
Main head assembly has a 1/2 lip above
the frame to provide a dust tight and
weatherproof seal. Split removable bonnet
for easy access.
All head and boot bearings are factory
installed pillow block bearing selected
for best efficiency, longest life and
maximum radial loadstorqued to proper
specifications.
Adjustable throat baffle for maximum
discharge. Discharge spout can be
furnished horizontal or on a 45 incline.
Wear points are lined in the head section.
Liner is available in urethane, ceramic or
ceramic chipped urethane.
Riley offers nine series of bucket elevators, each with several configurations, to
match your facility requirements. Customization is available to meet your specific
needs if they are not listed below:
Series
BPH
CFH
TPH
MTPH
Pulley RPM Belt FPM
Mercury
1350
1688
40
37
113
326
Pluto
2650
3313
79
72
95
448
Mars
3000
3750
90
82
77
482
Venus
3500
4375
105
95
65
510
Neptune
4750
5938
142
129
65
510
Saturn
8500
10625
210
190
64
603
*Jupiter
15575
19475
472
729
60
660
*Galaxy S 14600
18170
442
401
56
711
*Galaxy SX 29200
36340
884
802
56
711
* Multi-row buckets available. Capacities up to 60K standard, build to suit up to 80K
LADDER AND SAFETY CAGE
Ladder and safety cage include necessary brackets and hardware for mounting.
All ladders include a 13-9 section for entrance into the head platform. When
using an intermediate rest platform, reduce the amount of safety cage required by
10-0 for each platform. Each safety cage package includes an entrance cage x
2-0 long at the start and at each rest platform.
Dust tight and weather proof shaft seals.

Belting can be furnished in PVC or rubber.
Trunking end flanges are continuously
welded in a fixture to assure square and
parallel trunking for easy field assembly.
Designed so the trunking has adequate
column strength for a free standing
installation (guy cables or other lateral
supports are required at 20-0 max.
intervals).
Inspection and maintenance ports have
gasket seals.
Screw take-up is standard in the boot
section. External gravity take-up is
optional.
Inlet hopper is standard on up-side of
elevator.
Many other options available: service
platforms, ladders, safety cage, guy
brackets and explosion relief vents.
OPTIONAL ACCESSORIES
Dura-Splice Durable Belt Fastener with one size fits all belts and
pulleys. Each splice set joins a 2 wide belt area.
Elevator Head and Legging Explosion Relief Panels Relief panels
release pressure from possible explosion. Safety cable prevents
panel from falling. Each set includes four relief panels.
Elevator Belt Speed Monitor The speed monitor
mounts to the elevator boot shaft to detect
slowdown in belt speed, indicating a plug situation. An alarm is
sounded and/or the leg is shut down automatically. Available
in Single Set Point and Dual Set Point, both in dust-tight and
explosion proof models, less control cable and alarms.
Bucket Attachment Hardware #1 Norway Elevator bucket bolts with nuts are
sold (100) in 1 through 2 long, standard and fanged variety. 1/4 and 5/16 Lock
Washers, Flat Washers and H
ex Nuts are available.
Elevator Boot Hopper Magnet High intensity magnet is mounted in elevator boot
hopper to remove tramp metal. Quick release clamps are used for easy cleaning.
Elevator Belting
PVC belting is available from stock for widths of 7, 10, 11, 13 and 14. Other
widths of PVC as well as rubber belts are available.
2/27/2012 5:59:37 PM
Elevator Buckets
Elevator buckets are available in
polyethylene and steel. Specifications
required are length, width, number and
spacing of holes and hole size.
Riley bucket elevators are equipped

with head, boot, inspection section,
legging, assembly bolts, inlet hopper,
motor mount (less motor and drive),
PVC belting, polyethylene buckets,
and bucket bolts.
Urethane Sheet
High quality urethane sheet is stocked in 4 Ft. x 10 Ft. x 1/4 thickness with
expanded metal backing. Variety includes: 1/4 Expanded Metal Backed Urethane
and 1/4 Ceramic Chipped Urethane.
Motors
Motors up to 150 HP are available from stock. Motors are 1725-1800 RPM 60 Hz.
and 1450 RPM 50 Hz, three phase. Enclosures are TEFC or Explosion Proof,
Class II, Group G.
Boot Shovel Pocket
A boot shovel pocket is available on most bucket elevators. The
shovel pocket has a hinged cover and a grate over the opening.
The shovel pocket is located on the down leg side.
Pulleys
Replacement elevator and conveyor pulleys
are available in various types of construction;
single disc, drum and winged. Specifications required are
diameter, face width, shaft size, and crowned or flat face.
Pulley Lagging
Heavy-duty slide lagging (SOF Style 5) slides into retainers which are welded onto
the pulley. Replacement lagging is available in 6 Ft. long strips with retainers.
Gravity Take-Up Boot
Gravity take-up for automatic belt tension is available on the Pluto
series through the Jupiter series bucket elevators; and standard on
all Galaxy models. Included is a weight box and alignment bolts for
tracking the elevator belt.
Self Cleaning Boot
Gravity take-up for automatic belt tension. Self
cleaning style holds close clearance between boot bottom and
cups at all times. Winged style pulley with shaft mounted on
pillow block bearings.
Bucket Elevator Machinery Arm
The machinery arm mounts to the head platform.
All shaft mounted drives consist of:

Shaft-mounted Class II reducer with
bushings, sheaves and bushings,
drive belts (2.0 safety factor), and belt
guard.
Bucket elevators are available in
galvanized, painted black iron, and
stainless steel construction.
Legging type of construction is
illustrated below.
For standard galvanized construction:

STYLE 1 - Includes all 14 gauge
galvanized standard legging for
Mercury through Saturn models.
STYLE 2 - Includes all 12 ga.
galvanized legging for Pluto through
Saturn models.
galvanized legging for Jupiter through
Galaxy 15 models.
galvanized standard legging for Galaxy
20 through Galaxy 29 models.
STYLE 5 - is used for welded
construction. A fillet weld is used rather
than a butt weld for extra strength. For
some models weld seams may be on
the same side of the legging rather
than opposite corners as illustrated.
2/27/2012 5:59:39 PM
Experience a new standard of quality and

service with Riley Equipment, a preferred
designer and manufacturer of processing
machinery and bulk material handling
equipment for agriculture and a wide variety of
industrial markets.
This is next-level design and fabrication of
customized equipment to meet our customers
very specific
requirements, in
addition to a robust
standard equipment line. We manufacture
all products in-house under stringent quality
controls to ensure proper alignment and fit in
the field.
Riley
Equipment,
a division of LeMar Industries, offers
a complete line of bucket elevators,
distributors, spouting and accessories, drag
conveyors and screw conveyors.
LeMar Industries is an agricultural as well
as sand & gravel design and manufacturing
operation providing: support towers,
catwalks, temporary storage, transport
conveyors, bulk weighers, drive over conveyors, open belt conveyors,
grain reclaim service and super structures along with specialty fabricated
equipment. The LeMar Industries
family of companies also includes
Hall Industries, a cutting-edge
design and metal fabrication shop,
and Midwest Bearing, a leading
bearing and power transmission
aftermarket supply house.
www.lemarindustries.com
2/27/2012 5:59:45 PM

Bucket Elevator

Uploaded by

Copyright:

Available Formats

Bucket Elevator

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bucket Elevator

Uploaded by

Copyright:

Available Formats

BUCKET ELEVATORS

Looking for strength and durability

Riley Equipments bucket elevator line

Heavy-duty motor mounts with torque

Main Bucket Elevator Features:

LADDER AND SAFETY CAGE

Dust tight and weather proof shaft seals.

Riley bucket elevators are equipped

All shaft mounted drives consist of:

For standard galvanized construction:

Experience a new standard of quality and

You might also like