Consolidated-Relief Valve Catalogue

1900
Scope of Design
Table of Contents
Scope of Design
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.3
Pressure Relief Valve Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.5
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.7
Steam Trim (TD) Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.9
Liquid Trim (LA) Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.10
Restricted Lift Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.11
Soft Seat Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.12
Materials
Conventional Design 1900 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.15
Bellows Design 1900-30 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.17
Balanced Bellows Design 1900-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.19
Soft Seat (DA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.21
Steam Trim (TD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.22
Liquid Trim (LA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.23
Special Material and Service Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.24
Sour Gas (SG) Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.25
Hydrofluoric Acid (HA) Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.26
Corrosive Service
Stainless Steel (S2, S3 and S4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.27
Alloy 20 (A1, A2, A3 and A4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.28
Monel (M1, M1 (MB), M2, M3 and M4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.29
Hastelloy C (H1, H2, H3 and H4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.30
Low Temperature - Process Fluid (L1, L2 and L3)
(For media temperatures to -450F or -268C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.31
Low Temperature - Ambient (C1)
(For ambient temperatures to -50F or -45.6C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.32
High Temperature - (T1 and T2)
(For media temperatures to 1500F or 816C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.33
Lethal Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.34
O-Ring Selection (Durometer by valve type and set pressure) . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.35
O-Ring Selection (Temperature limits) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.36
Accessories
Caps, Levers, and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.37
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.41
Bolt-on Jackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.43
Dimension & Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.45
Pressure/ Temperature Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.56
Capacity Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900.86
1900.1
1900 (SRV-1/Q2.02)
1900
Scope of Design
Introduction
The comprehensive line of spring loaded CONSOLIDATED safety relief
valves represents over one hundred years of valve manufacturing
experience in meeting and solving industry problems involving a wide
scope of valve applications.
The flanged CONSOLIDATED safety relief valve line consists of valves in
a variety of sizes and materials. Each product offering is unique and
judgements are required in selecting the proper option.
To accomplish the selection process start with the General Information
section of this catalog and follow the prescribed steps necessary to
finalize the selection.
This Section, 1900 SRV, should be reviewed against the users
specifications and product offerings selected. Beyond this step, proceed
with sizing and then confirmation of the pressure and temperature limits
(API or ASME).
1900 Flanged Series safety relief valves are supplied in many variations
to suit specific applications.
Product variations covered in subsequent pages are noted below:
Product Variation
1900
1900- 30
1900- 35
1900HA
1900SG
1900DA
1900LA
1900DA - LA
1900TD
Description
Conventional
Bellows Construction
Balanced Bellows
with Auxiliary Balancing Piston
Special Materials for
Hydrofluoric Acid Service
Sour Gas Trim
Soft Seat
Liquid Trim with Metallic Seats
Liquid Trim with Soft Seats
Special Trim for Steam &
Organic Heat Transfer Media
The Consolidated 1900 series is compliant with the following codes

and standards:
ASME B & PVC, Section II - Material (Applicable as required by ASME
B & PVC, Section III or VIII)
ASME B & PVC, Section III, class 2 and 3 (Gas, Vapor, and Liquid
Service)
ASME B & PVC, Section VIII (Gas, Vapor, and Liquid Service)
ASME B16.34 and ASME B16.5
API 520, 526 and 527
ISO 4126
NACE MR0103-2003 Standard Material Requirements
API Standard 526-2002

Pressure Relief Valves specified within this catalog comply with API Standard
526 Fifth edition, 2002.
When required for replacement, Consolidated 1900 valves are also
available with connections and dimensions in accordance with supplanted
API Standard Third edition 1984 and prior editions.
Consolidated Spring Loaded Safety Relief Valves
1900.2
1900 (SRV-1/Q4.05)
1900
Scope of Design
1900 Series Overview

1900 Series Conventional Safety Relief Valves
VENT PLUG
Steel, Flat Seat, Top Guided, High Capacity, Stainless Steel Trim
This standard rugged configuration is equipped with corrosion resistant trim and a carbon steel body, bonnet
and cap. The components are top guided, providing for free and repeatable action.
The flat disc seat provides for easy maintenance and remachining.
The exclusive Eductor Tube minimizes bonnet cavity pressure so that product performance is predictable.
The nozzle is bottom inserted and rigidly held in position, providing a corrosion resistant path of flow to the
valve and corrosion resistant seating surfaces.
Type 1900 Series
Conventional
1900-30 Series Bellows Construction

This valve is the same as the conventional design except that a bellows has been added. When the bellows
is installed, the eductor tube is removed.
Caution: It is important that the bonnet be vented to the atmosphere.
VENT,
DO NOT PLUG
Type 1900-30 Series
Balanced Bellows
A bellows is added to the conventional valve to deal with any of several situations:
(1) Back pressure entering the valve through the valve outlet is excessive or variable. If back pressure
fluctuates with 10% of a nominal value, a bellows is required.
If a built up back pressure exceeds 10% of the set pressure or cold differential set pressure, a bellows must be used.
(2) If the entering fluid is a slurry, highly viscous, or of a nature that it can enter the critical clearances
between the guides/disc holder, protect that area with a bellows.
(3) If the fluid being handled is corrosive to the upper works of the valve, isolate the bonnet chamber through
use of a bellows.
Conventional valves can be easily converted to a bellows design or vice versa through the use of retrofit kits.
All CONSOLIDATED 1900-30 Series valves are balanced bellows designs, meaning that they fully compensate
for the effects of back pressure.
1900-35 Series Balanced Bellows (with Auxiliary Balancing Piston)

VENT,
DO NOT PLUG
Type 1900-35 Series
Balanced Bellows
1900.3
1900 (SRV-1/Q2.02)
The Balanced Bellows seals the body and fluid stream from the bonnet and working parts. Auxiliary balancing
piston assures proper valve performance by compensating for back pressure in case of bellows failure.
The use of an auxiliary balanced piston is indicated when:
(1) back pressure (either constant or variable) exists and;
(2) excessive pressure may build in the bonnet as a result of pressure build-up in the bonnet vent piping and;
(3) resultant build -up of pressure in the bonnet would cause a dangerous condition.
Caution: It is important that the bonnet be vented to the atmosphere.
NOTE: Unless otherwise stated the valve is always supplied with a screwed cap. The exception to this would be where
ASME B & PVC, Section VIII requires levers for steam, air, and hot water service over 140F.
Refer to Accessories for available types of caps, levers, and accessories.
1900
Scope of Design
1900 Series Overview
ASME
API
ORIFICE
0.1279
0.110
D
0.2279
0.196
E
0.3568
0.307
F
0.5849
0.503
G
Inlet
Flange
Rating
ASME
B16.5
1905
1x2
1x2
1-1/2 x 2
1-1/2 x 3
150
1906
1x2
1x2
1-1/2 x 2
1-1/2 x 3
300
1910
1x2
1x2
1-1/2 x 2
1-1/2 x 3
300
1912
1x2
1x2
1-1/2 x 2
1-1/2 x 3
600
1914
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
900
1916
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
2x3
1500
1918
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2500
1920
1x2
1x2
1-1/2 x 2
1-1/2 x 3
300
1922
1x2
1x2
1-1/2 x 2
1-1/2 x 3
600
1900 & 1900-30 Inlet x Outlet Size Combinations (in.) Orifice Area (Sq. in.)
1923
1924
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
900
1926
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
2x3
1500
1928
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2500
Outlet
Flange
Rating
ASME
B16.5
150
300
150
300
ASME
API
ORIFICE
0.9127
0.785
H
1.496
1.287
J
2.138
1.838
K
3.317
2.853
L
4.186
3.6
M
5.047
4.34
N
7.417
6.38
P
12.85
11.05
Q
18.6
16
R
30.21
26
T
50.26
N/A
V
Inlet Outlet
Flange Flange
78.996 Rating Rating
N/A
ASME ASME
W
B16.5 B16.5
1905
1-1/2 x 3
2x3
3x4
3x4
4x6
4x6
4x6
6x8
6x8
8 x 10
10 x 14
12 x 16
150
1906
1-1/2 x 3
2x3
3x4
3x4
4x6
4x6
4x6
6x8
6x8
8 x 10
10 x 14
12 x 16
300
1910
2x3
3x4
3x4
4x6
4x6
4x6
4x6
6x8
6 x 10
8 x 10
10 x 14
12 x 16
300
1912
2x3
3x4
3x4
4x6
4x6
4x6
4x6
6x8
6 x 10
8 x 10
600
1914
2x3
3x4
3x6
4x6
4x6
4x6
4x6
900
1916
2x3
3x4
3x6
4x6
1500
1918
2500
1920
2x3
3x4
3x4
4x6
4x6
4x6
4x6
6x8
6x8
8 x 10
10 x 14
12 x 16
300
1922
2x3
3x4
3x4
4x6
4x6
4x6
6x8
6 x 10
8 x 10
600
1923
4x6
600
1924
2x3
3x4
3x6
4x6
4x6
4x6
4x6
900
1926
2x3
3x4
3x6
4x6
1500
1928
2500
1900 & 1900-30 Inlet x Outlet Size Combinations (in.) Orifice Area (Sq. in.)
150
300
150
300
1900.4
1900 (SRV-1/Q4.05)
1900
Scope of Design
How Pressure Relief Valves Operate

All pressure relief valves operate on the principle of inlet system pressure
overcoming a spring load, allowing the valve to relieve a defined capacity.
Spring
Disc
orifice, pressure builds up in chamber B (See Figure 1900.2). Since

pressure can now act over a larger area, an additional force is available
to overcome the spring force. By adjusting the adjusting ring the
opening in the secondary annular orifice can be altered, thus controlling
pressure build-up in chamber B. This controlled pressure build - up in
chamber B will overcome the spring force causing the disc to move
away from the nozzle seat and the valve to pop open.
Secondary
Annular Orifice
Figure 1900.1 - Closed

HUDDLING
CHAMBER
When the valve is closed during normal operation (See Figure

1900.1), the vessel pressure acting against the seating surfaces
(area A) is resisted by the spring force. As vessel pressure increases,
the pressure at A tends to equalize the spring force and the pressure
holding the seats together approaches zero.
Secondary
Annular Orifice
Chamber B
Disc Holder
HUDDLING
CHAMBER
Adjusting Ring
Figure 1900.2 - Partially Open
In vapor or gas service the valve may simmer before it will pop.
When the vessel pressure increases to within one to two percent of the
set pressure, media will audibly move past the seating surfaces into
chamber B. As a result of restriction of flow in the secondary annular
1900.5
1900 (SRV-1/Q2.02)
Primary Orifice
Figure 1900.3 - Fully Open
Once the valve has opened an additional pressure build-up at C

occurs. (See Figure 1900.3.) This is due to the sudden flow increase
and the restriction to flow through another annular orifice formed
between the inner edge of the disc holder and the outside diameter of
the adjusting ring. These additional forces at C cause the disc to lift
substantially at pop.
Flow is restricted by the opening between the nozzle seat and disc seat
until the disc seat has been lifted from the nozzle seat approximately
one - quarter of the nozzle throat diameter. After the disc has attained
this degree of lift, flow is then restricted by the primary orifice rather
than by the area between the seating surfaces.
Blowdown (the difference between opening and closing pressure)
can be controlled within limits by positioning the single adjusting ring.
Blowdown is caused by the result of the spring force not being able to
overcome the summation of the forces at A, B, and C until the
pressure at A drops below the set pressure.
1900
Scope of Design
How Pressure Relief Valves Operate
Spindle
Eductor Tube
Guide
Disc Holder
Disc
Adjusting Ring
Secondary Annular Orifice
Adjusting Ring Pin
Primary Orifice
Inlet Neck
Nozzle
Threads
Base
Figure 1900.4
Figure 1900.4 reflects the flow path of fluid through the valve. It is significant to recognize that the system
pressure enters through the nozzle and remains at a high pressure until it expands through the secondary annular
orifice. Pressure downstream of the secondary annular orifice is much lower than the system pressure. The upper
portion of the valve base plus the outlet flange are of a lower pressure rating than the inlet side of the valve.
NOTE: BLOWDOWN SETTINGS - Production testing required by Manufacturers of safety relief valves is
governed by ASME Section VIII, UG -136 (d), which does not require the setting of blowdown
during production test. Adjusting rings on the 1900 flanged safety relief valve series are factory
adjusted to predetermined ring settings. This will provide a consistent opening and closing
pressure on the safety relief valve.
1900.6
1900 (SRV-1/Q2.02)
1900
Scope of Design
Product Features - 1900 Flanged Series

Adjusting Ring
Design Simplicity
The adjusting ring in the CONSOLIDATED safety relief valve is preset to

predetermined positions prior to putting the valve in service. Presetting
reduces the necessity of popping the valve in service to ascertain that
the ring has been set properly for attaining the necessary lift and
relieving capacity.
CONSOLIDATED safety relief valves embody a minimum number of

component parts which results in a savings by minimizing spare parts
inventory and simplifying valve maintenance.
Simple Blowdown Adjustment

Adjustment of CONSOLIDATED safety relief valve blowdown, or reseating
pressure, is by means of a single adjusting ring. When moved upward,
blowdown is increased (lowering the reseating pressure), or when moved
downward, the blowdown is decreased (raising the reseating pressure).
The simplicity and advantages of this adjustment are obvious when
comparing valves having two or more adjusting rings each of which affect
valve action as well as blowdown.
Minimum Guiding Area

Guiding areas greater than those required to align the seating surfaces are
undesirable in a safety relief valve, especially those used in the process
industries. The smaller the guiding area of the valve (when corrosion or
contamination from the flowing medium build up in the valve guiding
surfaces) the less tendency the guiding area will have to stick and hinder
valve operation.
Nozzle
The nozzle is a pressure containing component in constant contact with
the process media in both the open and closed valve positions. To ensure
maximum reliability and safety, CONSOLIDATED flanged SRV nozzles are
made from forgings, investment castings, or centrifugal castings.
Spindle Pocket Connection

The connection between the spindle and disc holder in a CONSOLIDATED safety
relief valve is a positive method of attachment. The Inconel snap ring and
groove design make it virtually impossible to remove the spindle from the
disc holde, unless the ring is compressed intentionally. This design requires
a minimum amount of effort to disassemble during maintenance.
1900.7
1900 (SRV-1/Q2.02)
Maximum Seat Tightness

Seat finish in a safety relief valve is of the utmost importance; otherwise,
valve leakage will occur.
CONSOLIDATED safety relief valve seats are precision machined and lapped.
This ensures positive seating and prevents loss of contained media.
The Thermodisc design provides a tighter closure and compensates
for temperature variations around the periphery of the nozzle. Thermal
distortion, which produces seat leakage, is minimized in steam service.
Cap and Lever Interchangeability

Many times it is necessary to change the type of cap or lever in the field
after a valve has been installed. All CONSOLIDATED safety relief valves are
supplied so they can be converted to any type of lever or cap desired. It
is not necessary to remove the valve from the installation, nor will the set
pressure be affected when making such a change.
Valve Interchangeability
A CONSOLIDATED safety relief valve may be converted from the standard,
conventional type valve to the bellows type, or to the O-Ring seat seal type,
Thermodisc seat Liquid Trim, or vice versa, requiring a minimum number
of new parts. This results in lower costs.
Quality Material
All CONSOLIDATED safety relief valve castings and forgings are made to
ASTM/ASME specifications and are subject to many rigid inspections,
ensuring the highest degree of quality.
Coupled with the highest quality workmanship, this ensures continuous
protection and long, trouble-free valve life.
1900
Scope of Design
Product Features - 1900 Flanged Series

Reduction of Valve Bonnet Pressure
Closed bonnet valves are subject to variable pressure past the guiding surfaces when the valve is open, which adds a variable force to that of the spring, affecting
valve performance. To eliminate excess bonnet pressure and ensure good valve opening and closing action, an Eductor Tube is provided.
The Eductor Tube reduces bonnet pressure by pulling discharging fluids out of the bonnet faster than it is possible for the discharging fluids to enter past
the guiding surfaces, acting as a siphon due to the drawing effect of the flow through the outlet side of the valve.
Eductor Tube Reduces Bonnet Pressure

An exclusive with CONSOLIDATED valves! During valve discharge, media flows through the clearance between the disc holder and guide, building up bonnet
pressure. This adds a variable force to the spring force, which inhibits valve lift. Bonnet pressure is reduced by the eductor effect of the medium flowing
at high velocity at the valve outlet.
The greater lifting force (resulting from a reduction in bonnet pressure) introduces important advantages:
(1) Response to blowdown control adjustment is uniform
(2) Positive, full-rated capacity at low overpressures is assured
(3) Better operation at higher back pressures with Eductor Tube.
(4) Complete stability (of valve lift and capacity) is assured during operation.
(5) Increases the lifting force when the valve opens and tends to break slight corrosive deposits or surface film which accumulate on the guiding
surfaces and retard valve action. (For severe corrosion applications, a bellows valve is recommended.)
Eductor Tube
Figure 1900.5 - Eductor Tube
1900.8
1900 (SRV-1/Q2.02)
1900
Scope of Design
1900 Steam Trim (TD) Valves

The 1900 TD is specifically designed for steam service and organic heat
transfer media and is certified to ASME Code Section Vlll.
Thermodisc this is a specifically designed disc for use on high

temperature fluids. This concept has more than 40 years of field
proven performance that ensures the tightest valves in the world.
A Thermodisc is required for steam service.
The Martensitic stainless steel disc construction allows for

high strength and toughness. As the set point of the valve is
approached, the pressure sealing effect of the Thermodisc
assists in the tightness of the seat as does the rapid thermal
equalization that occurs due to the thin sealing section.
1900 Steam Trim Internals

Disc Holder
Retainer Ring
Thermodisc
Adjusting Ring
Nozzle
1900 Disc Design Availability
Disc Design
Standard Solid Disc
Thermodisc1
Liquid
Organic
Heat
Transfer
Media
X
X
X
-
Liquid
Organic
Heat
Transfer
Media
-
Valve
Type
1900
1900-30
1900-35
1900/P12
1900/P32
NOTES: 1
2
3
4
1900.9
Steam
Liquid
X
X
X
-
Vapor
Organic
Heat
Transfer
Media
X
X
X
-
Vapor
Steam
Liquid
X
X
X
-
X
X
X
X3
X3
X4
-
Thermodisc is provided in one material only, a specially heat treated martenistic stainless steel.
Refer to the 1900/P Series section for product information.
1900/P Series are not intended for overpressure protection of power boiler drum, superheater or reheater equipment.
Consult the factory for special conditions that require the use of an ASME Code Section I pressure relief valve.
Except for liquid thermal relief applications, the P Series are not intended for liquid service.
1900 (SRV-1/Q2.02)
Vapor
Organic
Heat
Transfer
Media
X
X
X
X
X
Vapor
ASME
Code
Section
VIII
VIII
VIII
I or VIII
I or VIII
1900
Scope of Design
1900 Liquid Trim (LA) Valves

The Liquid Trim LA (liquid application) represents the second generation
of ASME B & PVC, Section VIII certified liquid trim valves and must be
used for all liquid applications for both ASME B & PVC, Section VIII
certified and non-certified valves. Liquid applications have been defined
as follows:
(1) if the fluid remains liquid while flowing through the valve
(2) if flowing fluid flashes going through the valve
(3) for ASME B & PVC, Section VIII certified and non-certified thermal
relief applications. (Thermal Relief is to prevent excessive pressure

caused by thermal expansion of trapped liquids). The LA trim provides
blowdown performance with ranges from 7% to 12% below the set
pressure. This valuable feature provides conservation of media, a positive
lift and a smooth chatter- free operation. Because of the short blowdown
performance of this design, it is critical that the inlet connection always
provide for a pressure drop of 3% or less from the vessel to the valve as
recommended by API 520.
Conversion of existing 1900 Series valves to liquid trim is available
through the factory or your local Green Tag Center.
1900 Liquid Service Internals
Guide
Disc Holder
Single piece disc holder

for maximum rigidity
and part integrity.
Disc Retainer
Disc
Nozzle
Adjusting Ring
Designed to provide high lift

and capacity with stable
operation on liquid media.
1900.10
1900 (SRV-1/Q2.02)
1900
Scope of Design
1900 Restricted Lift Valves

The 1900 series is offered in orifice sizes ranging from the smallest D size to the largest W size. In order to accomplish certain valve functions some
special considerations have to be made. Such a case is the D and E orifice designs noted below.
The D and E valves are restricted lift versions of the F orifice valve. The lift is restricted by a limit washer to provide the equivalent effective orifice area
for a D or E orifice. This design is available with a balanced bellows configuration and is designed for back pressure applications.
The standard 1900 Series are available with restricted lifts in orifices ranging from F to W for compressible media only.
D and E Orifice Only

RESTRICTED LIFT
Guide
Limit Washer
Disc Holder
Conventional
Limit Washer
Balanced Bellows
1900.11
1900 (SRV-1/Q2.02)
1900
Scope of Design
Soft Seat Applications

Closeness of Operating Pressure to Set Pressure
Hot Water Boiler Service
Where the operating pressure is close to the set pressure, seat tightness
can be maintained at relatively higher operating pressures.
When a safety relief valve opens hot water flashes into steam at the
seating surfaces and solid particles which float to the water surface are
driven against the seating surfaces at steam velocities. CONSOLIDATED O-Ring
seat seal valves can withstand this type of service and remain tight to a
greater degree than metal-to-metal seat valves.
CONSOLIDATED uses proven quality Teflon O-Ring seats for this service.
In some pressure/temperature applications, Teflon is not resilient, and
leakage may occur.
Compressor Discharge and Positive Displacement

Pump Service
Mechanical vibration and pressure waves could lift the valve disc with each
stroke and may cause flat metal-to-metal seats to rub together and become
damaged.
The 45 metal-to-metal load bearing seats in the CONSOLIDATED O-Ring
seat seal assure true alignment, aided by full system pressure behind the
O-Ring, which effectively seals against leakage.
Corrosive Services
In some services, corrosion of the seating surfaces is the cause of vaIve
leakage. In this type of service, the CONSOLIDATED O-Ring seat seal will
protect the metal seat on the nozzle against contact of the corrosive fluid
thereby maintaining greater tightness.
Foreign Matter and Slurry Service

Many times foreign material such as pipe scale, welding beads, sand
dust particles, etc. may damage the metal-to-metal seating surfaces in
a valve of this type when it is open and flowing.
The CONSOLIDATED O-Ring seat seal is designed to absorb the impact of
most foreign particles without damage.
Benefits
Safety Relief Valve leakage which is aggravated by any cause is usually
costly. In many cases, expensive product is lost and maintenance costs
increased. CONSOLIDATED O-Ring seat seal valves are designed to eliminate
leakage in troublesome applications and reduce overall costs. Should
leakage occur, it is much simpler and less expensive to replace the O-Ring
than to maintain metal-to-metal seats.
O-Ring Conversion
1900 Series CONSOLIDATED metal seated valves can be converted to O-Ring
seat seals by installing a few basic parts provided in a conversion kit.
1900-DA soft seats without bellows
1900.12
1900 (SRV-1/Q2.02)
1900
Scope of Design
1900 Soft Seat (DA) Option

The Double Seal Soft Seat
The double seal design incorporates the merits of both a soft seat and a metal
seat design valve. The 45 metal seat provides the load bearing surface to
transmit spring force, the slotted O-Ring retainer allows the O-Ring to be
pressurized and accomplish the primary sealing function. This O-Ring seal
design can be used throughout the full pressure range of the valve. For
pressure/temperature ratings of the seal, refer to O-Ring Selection Table in this
section (pages 1900.35 and 1900.36).
Tightness: CONSOLIDATED O-Ring seat seal valves are bubble tight at 95% of set
pressures over 100 psig.
The following table reflects the percent of set pressure (popping pressure) at
which the valve will be bubble tight on air.
Set Pressure
(psig)
Percent of
Set Pressure
5 to 30
90%
31 to 50
92%
51 to 100
94%
101 to Max rating of valve
95%
CONSOLIDATED O-Ring seat seals provide positive closure at service pressures

closer to the set pressure than is possible with metal - to - metal seats
assuring continuous, trouble-free service, and complete valve tightness after
numerous pops.
NOTE: The CONSOLIDATED 1900 O - Ring design features a secondary metal-to-metal seat
which becomes effective if O - Ring integrity is lost due to external fire or other
causes. The retainer is lapped to the nozzle at assembly assuring seat tightness.
1900.13
1900 (SRV-1/Q2.02)
1900
Scope of Design

How the Double Seal Works
Two unique features distinguish the CONSOLIDATED O-Ring seat seal safety
valve from other designs. These are the 45 metal - to-metal load bearing
seats and the slotted O-Ring retainer.
45
Three Essentials to a Tighter and More Secure Seal:

1) Concentric Alignment
The nozzle bore and O -Ring retainer are both machined to an angle of
45. This ensures that as the valve disc opens and closes, the O -Ring
is aligned concentrically against the lip of the nozzle. Close tolerance
between the nozzle and the body, or the body and the disc guide and disc
holder, also help to ensure a tight seal when the valve is closed. Accurate
alignment coupled with the load bearing function of the O -Ring retainer
virtually eliminates O -Ring abrasion from valve action.
2) Maximum Sealing Force
On the back side of the O -Ring retainer there are two small slots. When
the valve is closed, process media enters between the machined seat of
the nozzle and the O -Ring retainer and proceeds up the slots behind the
O -Ring. This pressure forces the O -Ring against the lip of the nozzle and
the curved recess of the disc holder. As the pressure within the valve rises
to set point, the O -Ring is pressed tightly against the nozzle to maintain
maximum sealing force until break-away pressure is reached.
3) O-Ring Retention
When the valve opens, the pressure behind the O -Ring escapes from the
same two slots on the O -Ring retainer. This prevents the O -Ring from
being ejected. Additionally, the O -Ring encapsulating retainer prevents
the O -Ring from being pulled from its setting by the high velocity, low
pressure discharge inside the upper valve body.
1900.14
1900 (SRV-1/Q2.02)
1900
Materials
Conventional Safety Relief Valves

1900 Series
Standard Material for

Conventional Type Safety Relief Valves
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
27
40
41
1900.15
1900 (SRV-1/Q4.04)
Part
Material
Base: Types 1905 thru 1918

Nozzle
Adjusting Ring
Adjusting Ring Pin
Adjusting Ring Pin Gasket
Disc
Disc Retainer Ring
Disc Holder
Guide
Guide Gasket
Bonnet
Bonnet Gasket
Base Stud
Base Stud Nut
Spindle
Spindle Retainer
Spring Washer
Spring - types 1900 (-75F to 800F)
Spring - types 1920 (801F to 1000F)
Adjusting Screw
Adjusting Screw Locknut
Screwed Cap
Cap Gasket
Eductor Tube
Vent Pipe Plug
SA216 Grade WCC Carbon Steel

SA217 Grade WC6 Alloy Steel
316 SS
316 SS
316 SS
Soft Iron
316 SS
Inconel X750
316 SS
316 SS
Soft Iron
Soft Iron
B7 Alloy Steel
2H Carbon Steel
400 Series SS
Inconel X750
Carbon Steel
Alloy Steel
Inconel X750 or Tungsten
416 SS
416 SS
Carbon Steel
Soft Iron
304 SS
Carbon Steel
1900
Materials
For Gas, Vapor, and Liquid Service

1900 Series
19
20
21
27
11
17
15
18
13
41
17
14
16
9
12
10
8
7
40
6
5
4
3
2
1
1900.16
1900 (SRV-1/Q2.02)
1900
Materials
1900-30 Series Bellows Assembly

Bellows Type Safety Relief Valves
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
27
40
41
1900.17
1900 (SRV-1/Q4.04)
Part
Material
Base: Types 1905-30 thru 1918-30

Base: Types 1920-30 thru 1928-30
Nozzle
Adjusting Ring
Adjusting Ring Pin
Disc
Disc Retainer Ring
Disc Holder
Guide
Guide Gasket
Bonnet
Bonnet Gasket
Base Stud
Base Stud Nut
Spindle
Spindle Retainer
Spring Washer
Adjusting Screw
Screwed Cap
Cap Gasket
Bellows Assembly
Bellows
Bellows Ring & Bellows Flange
Bellows Gasket

316 SS
316 SS
316 SS
Soft Iron
316 SS
Inconel X750
316 SS
316 SS
Soft Iron
Soft Iron
B7 Alloy Steel
2H Carbon Steel
400 Series SS
Inconel X750
Carbon Steel
Alloy Steel
416 SS
416 SS
Carbon Steel
Soft Iron
Inconel 625 LCF

316L SS
Soft Iron
1900
Materials

1900-30 Series
21
19
20
27
17
11
15
18
VENT,
DO NOT PLUG
17
13
14
16
9
12
10
8
7
40
41
5
4
2
1
1900.18
1900 (SRV-1/Q2.02)
1900
Materials
1900-35 Balanced Bellows


Balanced Piston Type Safety Relief Valves
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
33
46
47
1900.19
1900 (SRV-1/Q4.04)
Part
Material
Base: Types 1905-35 Thru 1918-35

Base: Types 1920-35 Thru 1928-35
Nozzle
Adjusting Ring
Adjusting Ring Pin
Disc
Disc Retainer Ring
Disc Holder
Guide
Guide Gasket
Piston Guide
Piston Guide Lockscrew
Piston
Piston Lockscrew
Seal Ring
Seal Ring Expander
Bonnet
Bonnet Gasket
Base Stud
Base Stud Nut
Spindle
Spindle Retainer
Spring Washer
Adjusting Screw
Screwed Cap
Cap Gasket
Bellows Assembly
Bellows
Bellows Ring and Bellows Flange
Bellows Gasket

316 SS
316 SS
316 SS
Soft Iron
316 SS
Inconel X750
316 SS
316 SS
Soft Iron
304 SS
Carbon Steel
304 SS
Carbon Steel
Graphitar Grade 67
400 Series SS
Soft Iron
B7 Alloy Steel
2H Carbon Steel
400 Series SS
Inconel X750
Carbon Steel
Alloy Steel
416 SS
416 SS
Carbon Steel
Soft Iron
Inconel 625 LCF

316 L SS
Soft Iron
1900
Materials

1900-35 Series
27
25
26
33
17
23
24
21
23
19
22
20
14
12
18
13
15
16
11
8
9
10
7
6
46
47
5
4
2
1
1900.20
1900 (SRV-1/Q2.02)
1900
Materials
Disc Holder
Retainer Lock Screw
O-Ring Seat Seal
O-Ring Retainer
Nozzle
D Thru J Orifice
Disc Holder
Disc Retainer
Disc
Retainer Lock Screw
O-Ring Seat Seal
O-Ring Retainer
Nozzle
K Thru T Orifice
Part Name
Materials 2
Nozzle
Disc
Disc Holder
Disc Retainer
O-Ring Retainer
Retainer Lock Screw(s)
O-Ring Seat Seal
316 SS
316 SS
316 SS
Inconel X750
316 SS
316 SS
Select 1
NOTES: 1 Refer to pages 1900.35 & 1900.36 for O-Ring Selection (Durometer
and Temperature Limits). See Technical Information Section for application.
2 Balance of Materials same as 1900 standard construction
1900.21
1900 (SRV-1/Q2.02)
1900
Materials
1900 Steam Trim (TD) Option
Guide
Disc Holder
Disc Retainer
Thermodisc
Nozzle
Adjusting Ring
Part Name
Materials 1
Nozzle
Thermodisc
Disc Retainer
Disc Holder
Guide
Adjusting Ring
316 SS
616 SS
Inconel X750
316 SS
316 SS
316 SS
NOTE: 1 Balance of materials same as 1900 standard construction.
1900.22
1900 (SRV-1/Q2.02)
1900
Materials
1900 Liquid Trim (LA) Option
Disc Holder
Guide
Disc Retainer
Disc
Adjusting Ring
Nozzle
Part Name
Materials 1
Nozzle
Disc
Disc Retainer
Disc Holder
Guide
Adjusting Ring
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
NOTE 1: Balance of materials same as 1900 standard construction.
1900.23
1900 (SRV-1/Q2.02)
1900
Materials
1900 Special Material & Service Options

The 1900 Flanged Series offers various material options to satisfy customer needs and API standards. The most common options are listed in this section.
These material options are not the only available options however. Inquire of Dresser Consolidated for options not listed here.
Specify the material construction classification using the construction variations such as: S2, H4, etc.
Options included are:
Sour Gas Service (SG1, SG10, SG5, and SG15)
Hydrofluoric Acid Service (HA)
Stainless Steel (S2, S3, and S4)
Alloy 20 (A1, A2, A3,and A4)
Monel (M1, M1 (MB), M2, M3, and M4)
Hastelloy C (H1, H2, H3, and H4)
Low Temperature - Process Fluid (L1, L2, and L3) (For media temperatures to -450F or -268C)
Low Temperature - Ambient (C1) (For ambient temperatures to -50F or -45.6C)
High Temperature (T1 & T2) (For media temperatures to 1500F or 816C)
Lethal Service
O-Ring Selection
PAGE NUMBER
1900.25
1900.26
1900.27
1900.28
1900.29
1900.30
1900.31
1900.32
1900.33
1900.34
1900.35
Many other special options are available not necessarily of a material nature. These include, but are not limited to, special facings on connections or
special connections. Contact the factory for any special requirements you may have.
1900.24
1900 (SRV-1/Q4.05)
1900
Materials
1900 Sour Gas (SG) Trims

Material requirements of NACE Standard MR0103-2003 are applicable
to systems handling sour gas if the total operating pressure of the system
is 65 psia or greater and if the partial pressure of H2S in the gas is 0.05
psia or greater.
The SG10 (non-bellows) and SG15 (bellows) material selections are
satisfactory for applications in which the valve secondary pressure
(outlet side) does not exceed 65 psia (50 psig). Under valve relieving
conditions, 50 psig secondary pressure would not normally be exceeded

until the valve set pressure exceeds 450 psig (31.0 Bar).
The SG1 (non-bellows) and SG5 (bellows) material selections comply
with NACE standard MR0103-2003.
Specific applications may be referred to the factory for
recommendations.
Special Materials, Sour Gas Service1
Construction Variation
Component
Conventional Valves
SG14

Nozzle
Disc
Bellows Assembly
Flange
Bellows
Ring
Adjusting Ring
Adjusting Ring Pin
Disc Holder
Guide
Spindle
Spindle Retainer
Bonnet
Base Stud
Base Stud Nut
Spring
Spring Washer
Adjusting Screw
Disc Retainer
Cap
Cap Gasket
Bonnet Gasket
Bellows Gasket
Guide Gasket
Adj. Ring Pin Gasket
Eductor Tube
Base Plug: Types 1905 thru 1918
Base Plug: Types 1920 thru 1928
Bonnet Plug
NOTES: 1
2
3
4
5
6
1900.25
1900 (SRV-1/Q4.05)
SG103
SA216 WCC Carbon Steel SA216 WCC Carbon Steel

SA217 WC6 Alloy Steel SA217 WC6 Alloy Steel
316 SS
316 SS
316 SS
316 SS
N/A
N/A
N/A
N/A
N/A
N/A
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
400 Series SS
Inconel X750
Inconel X750
SA216 WCC Carbon Steel SA216 WCC Carbon Steel
B7 Alloy Steel
B7 Alloy Steel
2H Carbon Steel
2H Carbon Steel
2
Inconel X750
316 SS
Carbon Steel
316 SS
416 SS
316 SS
416 SS
Inconel X750
Inconel X750
Carbon Steel
Carbon Steel
Soft Iron
Soft Iron
Soft Iron
Soft Iron
N/A
N/A
Soft Iron
Soft Iron
Soft Iron
Soft Iron
304 SS
304 SS
Carbon Steel
Carbon Steel
316 SS
316 SS
Carbon Steel
Carbon Steel
Bellows Valves
SG54
SG153
SA216 WCC Carbon Steel

SA217 WC6 Alloy Steel
316 SS
316 SS
316L SS
Inconel 625 LCF5
316L SS
316 SS
316 SS
316 SS
316 SS
400 Series SS
Inconel X750
B7 Alloy Steel
2H Carbon Steel
2

SA217 WC6 Alloy Steel
316 SS
316 SS
316L SS
Inconel 625 LCF
316L SS
316 SS
316 SS
316 SS
316 SS
400 Series SS
Inconel X750
B7 Alloy Steel
2H Carbon Steel
2
Carbon Steel
416 SS
416 SS
Inconel X750
Carbon Steel
Soft Iron
Soft Iron
Soft Iron
Soft Iron
Soft Iron
N/A
Carbon Steel
316 SS
N/A
Carbon Steel
416 SS
416 SS
Inconel X750
Carbon Steel
Soft Iron
Soft Iron
Soft Iron
Soft Iron
Soft Iron
N/A
Carbon Steel
316 SS
N/A
The materials in red denote variation from standard material construction.

Alloy springs are used for temperatures up to 800F (426.7C) and are aluminum metallized.
SG10 and SG15 are the same as standard valves except for springs being aluminum metallized.
SG1 and SG5 are NACE MR0103 and MR0175-2002 and prior editions compliant.
Heat treated.
Compliance with NACE MR0175-2003 requires media and materials evaluation. Please contact factory sales.
1900
Materials
1900 Hydrofluoric Acid (HA) Service

To meet the demanding requirements of the extremely corrosive HF Alky
service, Dresser Measurement has, in conjunction with major designers
and users in this industry, developed the 1900 HA variation. Extensive
use of Monel Alloy 400, in the stress relieved condition for critical
components, has been utilized for this option.
NACE document 5A171 states, In practice, occurrence of stress corrosion
cracking may either be avoided by complete exclusion of oxygen or may
be minimized by stress relieving welded or cold formed parts. The HA

materials should not be confused with the M1 through the M4 materials
used for other corrosive applications.
In addition to the special stress relieved conditioned Monel 400 materials,
a bellows seal and litharged cured soft seat has been incorporated into
this option. Long term applications have provided excellent results in the
most severe, moist, aerated, HF Alky service.
Special Materials, Hydrofluoric Acid Service1,2
Component
Base
Nozzle
Adjusting Ring
Adjusting Ring pin
Adj. Ring Pin Gasket
Disc
Disc Retainer
O-Ring
O-Ring Retainer
Retainer Lock Screw
Disc Holder
Guide
Guide Gasket
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Bonnet
Bonnet Gasket
Base Stud
Base Stud Nut
Spindle
Spindle Retainer
Spring (-20F to 800F)
Spring Washer
Adjusting Screw
Cap
Cap Gasket
Limit Washer
HA
SA216 WCC (radiographed per supplement S5)
Monel 400 (stressed relieved)
Monel 400
Monel 400
Monel 400
Inconel X750
Viton A (litharge cured)
Monel 400
Monel 400
Monel 400
Monel 400
Monel 400
Monel 400
Garlock Gylon 35101
Monel 400
K Monel
K Monel
Monel 400
Inconel X750
Alloy Steel (nickel plated)
Carbon Steel
Monel 400
Monel 400
Carbon Steel
Monel 400
Monel 400
NOTES: 1 The materials in red denote variation from standard material construction.
2 To specify valves, add material designation to the valve type, 1910L/HA or 1910-30L/HA.
1900.26
1900 (SRV-1/Q4.05)
1900
Materials
Corrosive Service
1,2
Corrosive Service, Stainless Steel Material
Component
S2
S3
S4
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
316 SS
Gr. B8M
Gr. 8M
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
316 SS
Gr. B8M
Gr. 8M
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Guide Gasket
Base, Bonnet, Cap
Base Studs
Base Stud Nuts
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
Carbon Steel
B7 Alloy Steel
2H Carbon Steel
Non-Bellows Valve Components

Guide
Spindle
Adjusting Screw
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
Cap Gasket
316 SS
316 SS
316 SS
316 SS
Alloy Steel
Carbon Steel
304 SS
Monel
Monel
316 SS
316 SS
316 SS
316 SS
Alloy Steel
Carbon Steel
316 SS
Monel
Monel
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
Monel
Monel
Bellows Valve Components

Guide
Spindle
Adjusting Screw
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washer
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Monel
Alloy Steel
Carbon Steel
Soft Iron
Monel
2 To specify valves, add material designation to the valve type, 1910L/S3 or 1910-30L/S3.
1900.27
1900 (SRV-1/Q4.04)
316 SS
316 SS
316 SS
316 SS
316L SS
Inconel 625 LCF
316L SS
Monel
Alloy Steel
Carbon Steel
Monel
Monel
316 SS
316 SS
316 SS
316 SS
316L SS
Inconel 625 LCF
316L SS
Monel
316 SS
316 SS
Monel
Monel
1900
Materials
Corrosive Service
1,2
Corrosive Service, Alloy 20 Material
Component
A1
A2
A3
A4
Alloy 20
Alloy 20
Inconel X750
Alloy 20
Alloy 20
Alloy 20
Inconel X750
Monel
Monel
3
Alloy 20
Alloy 20
Inconel X750
Alloy 20
Alloy20
Alloy 20
Inconel X750
Monel
Monel
3
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy Steel
Carbon Steel
Alloy 20
Monel
Monel
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Monel
Monel
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Monel
Alloy Steel
Carbon Steel
Monel
Monel
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Monel
Alloy 20
Alloy 20
Monel
Monel
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Guide Gasket
Base, Bonnet, Cap
Base Studs
Base Stud Nuts
Alloy 20
Alloy 20
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Soft Iron
Soft Iron
Carbon Steel
B7 Alloy Steel
2H Carbon Steel
Alloy 20
Alloy 20
Inconel X750
Alloy 20
Alloy 20
Alloy 20
Inconel X750
Monel
Monel
Carbon Steel
B7 Alloy Steel
2H Carbon Steel

Guide
Spindle
Adjusting Screw
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
Carbon Steel
304 SS
Soft Iron
Soft Iron
Alloy 20
Alloy 20
Alloy 20
Alloy 20
Alloy Steel
Carbon Steel
304 SS
Monel
Monel

Guide
Spindle
Adjusting Screw
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washer
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Soft Iron
Alloy Steel
Carbon Steel
Soft Iron
Soft Iron
316 SS
400 Series SS
416 SS
416 SS
Alloy 20
Alloy 20
Alloy 20
Monel
Alloy Steel
Carbon Steel
Soft Iron
Monel
2 To specify valves, add material designation to the valve type, 1910L/A3 or 1910-30L/A3.
3 ASME SA351 grade CN7M alloy steel.
1900.28
1900 (SRV-1/Q4.04)
1900
Materials
Corrosive Service
1,2
Corrosive Service, Monel Material
Component
M1
MB ( M 1 )
M2
M3
M4
Monel
Monel
Inconel X750
Monel
Monel
Monel
Inconel X750
Monel
Monel
Carbon Steel
B7 Alloy Steel
2H Carbon Steel
Monel
Monel
Inconel X750
Monel
Monel
Monel
Inconel X750
Monel
Monel
Monel
K Monel
K Monel
Monel
Monel
Inconel X750
Monel
Monel
Monel
Inconel X750
Monel
Monel
Monel
K Monel
K Monel
Monel
Monel
Monel
Monel
Alloy Steel
Carbon Steel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Inconel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Alloy Steel
Carbon Steel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Monel
Inconel
Monel
Monel
Monel
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Guide Gasket
Base, Bonnet, Cap
Base Studs
Base Stud Nuts
Monel
Monel
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Soft Iron
Soft Iron
Carbon Steel
B7 Alloy Steel
2H Carbon Steel
Monel
Monel
Inconel X750
Monel
Monel
Monel
Inconel X750
Monel
Monel
Carbon Steel
B7 Alloy Steel
2H Carbon Steel

Guide
Spindle
Adjusting Screw
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
Carbon Steel
304 SS
Soft Iron
Soft Iron
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
Carbon Steel
304 SS
Monel
Monel
Monel
Monel
Monel
Monel
Alloy Steel
Carbon Steel
304 SS
Monel
Monel

Guide
Spindle
Adjusting Screw
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washers
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Soft Iron
Alloy Steel
Carbon Steel
Soft Iron
Soft Iron
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Monel
Alloy Steel
Carbon Steel
Soft Iron
Monel
316 SS
400 Series SS
416 SS
416 SS
Monel
Monel
Monel
Monel
Alloy Steel
Carbon Steel
Soft Iron
Monel
2 To specify valves, add material designation to the valve type, 1910L/M3 or 1910-30L/M3.
1900.29
1900 (SRV-1/Q4.04)
1900
Materials
Corrosive Service
1,2
Corrosive Service, Hastelloy Material
Component
H1
H2
H3
H4
Hastelloy C
Hastelloy C
Inconel X750
Hastelloy C
Hastelloy C
Hastelloy C
Inconel X750
Monel
Monel
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Inconel X750
Hastelloy C
Hastelloy C
Hastelloy C
Inconel X750
Monel
Monel
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Alloy Steel
Carbon Steel
Hastelloy C
Monel
Monel
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Monel
Monel
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Monel
Alloy Steel
Carbon Steel
Monel
Monel
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Monel
Hastelloy C
Hastelloy C
Monel
Monel
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Guide Gasket
Base, Bonnet, Cap
Base Studs
Base Stud Nuts
Hastelloy C
Hastelloy C
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Soft Iron
Soft Iron
Carbon Steel
B7 Alloy Steel
2H Carbon Steel
Hastelloy C
Hastelloy C
Inconel X750
Hastelloy C
Hastelloy C
Hastelloy C
Inconel X750
Monel
Monel
Carbon Steel
B7 Alloy Steel
2H Carbon Steel

Guide
Spindle
Adjusting Screw
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
Carbon Steel
304 SS
Soft Iron
Soft Iron
Hastelloy C
Hastelloy C
Hastelloy C
Hastelloy C
Alloy Steel
Carbon Steel
304 SS
Monel
Monel

Guide
Spindle
Adjusting Screw
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washer
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Soft Iron
Alloy Steel
Carbon Steel
Soft Iron
Soft Iron
316 SS
400 Series SS
416 SS
416 SS
Hastelloy C
Hastelloy C
Hastelloy C
Monel
Alloy Steel
Carbon Steel
Soft Iron
Monel
2 To specify valves, add material designation to the valve type, 1910L/H3 or 1910-30L/H3.
1900.30
1900 (SRV-1/Q4.04)
1900
Materials
Low Temperature
1,2
Special Materials for Low Process Fluid Temperature
Component
-21F to -75F
-29C to -59C
-76F to -150F
-60C to -101C
-151F to -450F
-102C to -268C
L13
L2
L3
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
Monel
316 SS
316 SS
316 SS
Gr. B8M
Gr. 8M
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
Monel
316 SS
316 SS
316 SS
Gr. B8M
Gr. 8M
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Cap Gasket
Guide Gasket
Base
Bonnet
Cap
Base Studs
Base Stud Nuts
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Monel
Monel
Monel
316 SS
Carbon Steel
Carbon Steel
Gr. B8M
Gr. 8M

Guide
Spindle
Adjusting Screw
Adjusting Screw Nut
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
316 SS
304 SS
Monel
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
Monel
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
316 SS
Monel

Guide
Spindle
Adjusting Screw
Adjusting Screw Nut
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washer
Bonnet Gasket
1900.31
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Monel
Alloy Steel
Carbon Steel
Monel
316 SS
316 SS
316 SS
316 SS
316L SS
Inconel 625 LCF
316L SS
Monel
316 SS
316 SS
Monel
2 To specify valves, add material designation to the valve type, 1910L/L3 or 1910-30L/L3.
3 SA 352LCC material can be utilized down to -50F (-45C) for bases, bonnets, or caps when requested.
1900 (SRV-1/Q4.04)
316 SS
316 SS
316 SS
316 SS
316L SS
316L SS
316L SS
Monel
316 SS
316 SS
Monel
1900
Materials
Low Temperature
Special Materials for Low Ambient Temperatures
(to -50F or -45C1,2)
Component
C13
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Guide Gasket
Base, Bonnet, Cap
Base Studs
Base Stud Nuts
316 SS
316 SS
Inconel X750
316 SS
316 SS
316 SS
Inconel X750
Soft Iron
Soft Iron
LCC Carbon Steel
B8M
8M

Guide
Spindle
Adjusting Screw
Adjusting Screw Nut
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
Alloy Steel
316 SS
304 SS
Soft Iron
Soft Iron

Guide
Spindle
Adjusting Screw
Adjusting Screw Nut
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washers
Bonnet Gasket
Cap Gasket
316 SS
400 Series SS
416 SS
416 SS
316L SS
Inconel 625 LCF
316L SS
Soft Iron
Alloy Steel
316 SS
Soft Iron
Soft Iron
2 Media temperature may impact valve temperature. Contact factory for assistance.
3 To specify valves, add material designation to the valve type, 1910L/C1 or 1910-30L/C1.
1900.32
1900 (SRV-1/Q4.04)
1900
Materials
High Temperature
1,2
Special Materials for High Process Fluid Temperature
Component
1001F to 1200F
538C to 649C
1201F to 1500F
649C to 815C
T1
T23,4
Common Components
Nozzle
Disc
Disc Retainer
Disc Holder
Adjusting Ring
Adjusting Ring Pin
Spindle Retainer
Cap Gasket
Guide Gasket
Base
Bonnet
Cap
Base Studs
Base Stud Nuts
Deflector Plate
316 SS
316 SS
Inconel X750
316 SS Glide-Aloy Treated
316 SS
316 SS
Inconel X750
Monel
Monel
Monel
316 SS
316 SS
Carbon Steel
Gr. B8M
Gr. 8M
N/A
316 SS/Stellited
Inconel X750
Inconel X750
316 SS
316 SS
Inconel X750
N/A
Monel
Monel
316 SS
Slotted 316 SS
Carbon Steel
Gr. B8M
Gr. 8M
304 SS

Guide
Spindle
Adjusting Screw
Spring
Spring Washers
Eductor Tube
Bonnet Gasket
316 SS
400 Series SS
416 SS
416 SS
Carbon Steel
304 SS
Monel

316 SS/Stellited
416 SS
416 SS
410 SS
N/A
N/A

Guide
Spindle
Adjusting Screw
Bellows Assembly
Flange
Bellows
Ring
Bellows Gasket
Spring
Spring Washer
Bonnet Gasket
1900.33
NOTES: 1
2
3
4
1900 (SRV-1/Q4.04)
316 SS
400 Series SS
416 SS
416 SS

316 SS/Stellited
416 SS
416 SS
Inconel 625
Inconel 625 LCF
Inconel 625
Monel
Carbon Steel
Monel
Inconel 625
Inconel 625 LCF
Inconel 625
Monel
410 SS
N/A
The materials in red denote variation from standard material construction.

To specify valves, add material designation to the valve type, 1920L/T2 or 1920-30L/T2.
All T2 valves have ANSI Class 300 outlet flanges.
Consult factory for temperatures above 1500F (815C).
1900
Materials
1900 Valves for Lethal Service

In some industries served by CONSOLIDATED, there are lethal service applications. These applications require special consideration as detailed below. Should you feel that your
application may be for lethal service, please review this information. LETHAL SERVICE should be prominently indicated in your discussions, inquiries, or purchase orders.
I. Definition
III. Base, Bonnet, and Cap Casting Requirements
ASME B & PVC, Section VIII (Division 1) states that it is the responsibility of the
user to state that the valve will be in lethal service.
A.
B.
IMPORTANT
CONSOLIDATED does not determine if a fluid is lethal. The customer must specify
the fluid is lethal and his paperwork should be clearly stamped, identifying the
application as a lethal fluid.
The ASME Code definition is as follows:
Lethal Substance - Poisonous gases or liquids of such a nature that a very

small amount of the gas or the vapor of the liquid, mixed or unmixed with
air, is dangerous to life when inhaled.
ASME B31.3, a chemical plant and petroleum refining piping standard, supplies
a similar definition, which they call a Category M Fluid Service.
II. Valve Requirements for Lethal Service

Application
A.
B.
C.
D.
E.
Only closed bonnet valves with a screwed or bolted cap or packed lever
can be used for lethal service.
Valve model numbers that are acceptable for lethal service after
modification are 1905/1910 conventional and bellows flanged valves.
It is recommended that a soft seat design be used for improved tightness.
When service temperature exceeds 450F (232C), bolting material
review is required by Dresser Measurement Engineering.
Use non-sparking material for flammable media. Examples are Bronze,
316 Stainless Steel, and Monel.
C.
D.
E.
F.
G.
H.
Each casting requires 100% visual inspection

Each casting requires complete surface examination either by magnetic
particle for steel castings or liquid penetrant for stainless castings.
Each casting shall have radiographic examination.
All repairs to base, bonnet, and cap castings must be documented.
All threads must be inspected for continuity of threads
Hydrotest hold time for ten (10) minutes.
The base drain plug is to be sealed by seal welding a plug of the same
material as the base.
The bonnet vent is to be sealed in accordance with paragraph G for
conventional valves (non-bellows). Bellows valves are to have the vent
connection vented to a safe location.
IV. Additional Requirements

A.
B.
C.
D.
E.
Each bellows requires a mass spectrometer leak test to 1 x 10-7 cc/sec

to be imposed.
It is necessary to seal the nozzle-base joint. The customer must state
their preference between a seal weld or O-Ring joint, depending on
conformance of their maintenance practice.
The nozzle and disc require hydrotesting with a hold time for a minimum
of ten (10) minutes.
Cleaning procedures and lubricants used shall be acceptable for lethal
service.
Back pressure testing is required. Documentation of test is required.
1900.34
1900 (SRV-1/Q2.02)
1900
Materials
O-Ring Selection
O-Ring Selection Table - Durometer (USCS Units)
Set Pressure Range (psig)

Valve Type
1900D & E
1900F
1900G
1900H
1900J
1900K
1900L
1900M
1900N
1900P
1900Q
1900R
1900T
1900V
1900W
501
70 - 751
902
5 to 350
5 to 350
5 to 375
5 to 375
5 to 315
5 to 235
5 to 235
5 to 235
5 to 235
5 to 200
5 to 170
5 to 120
5 to 80
120 to 800
120 to 800
125 to 780
140 to 780
45 to 780
125 to 580
75 to 580
70 to 580
40 to 580
30 to 500
40 to 420
25 to 300
15 to 200
15 to 300
7 to 300
265 to 2000
265 to 2000
375 to 1900
330 to 1900
150 to 1900
255 to 1400
155 to 1400
140 to 1100
90 to 1000
75 to 1000
80 to 600
60 to 300
30 to 300
15 to 300
7 to 300
NOTES: 1 Maximum set pressure for silicone compounds is half of the maximum value.
2 The E962-90D 0-Ring can be used in steam service in applications down to 15 psig.
3 Teflon will not be supplied for conditions that deviate from these ranges.
1900.35
1900 (SRV-1/Q4.05)
Teflon3
-300F to 200F
2000 to 6000
2000 to 6000
1900 to 3705
1900 to 2750
1900 to 2700
1400 to 2220
1400 to 1500
15 to 300
15 to 300
Teflon3
201F to 500F
285 to 6000
285 to 6000
285 to 3705
285 to 2750
285 to 2700
250 to 2220
155 to 1500
140 to 1100
90 to 1000
75 to 1000
80 to 600
60 to 300
30 to 300
15 to 300
15 to 300
1900
Materials
O-Ring Selection
O-Ring Temperature Limits
NOTES: 1
2
3
4
5
Materials
Durometer
Description5
Temp. Limits (F)
Temp. Limits (C)
Nitrile
50
70
90
704
N299-50 or N1009-50
N674-70
N552-90
N1173-70
-45 to +225
-40 to +250
-40 to +350
-25 to +300
-43 to +107
-40 to +121
-40 to +177
-31 to +149
Ethylene/Propylene
50
70
75 & 802
90
75
E981-50
E603-70
E740-75 & E515-80
E962-901
E962-75
-65 to +212
-65 to +212
-70 to +250
-70 to +500
-60 to +250/400
-53 to +100
-53 to +100
-57 to +121
-57 to +260
-51 to +121/204
Fluorocarbon
50
75
90
V986-50
V747-75 or V884-75
V894-90 or V709-90
-15 to +400
-15 to +400
-15 to +400
-26 to +204
-26 to +204
-26 to +204
Neoprene
50
70
C267-50
C944-70 or C873-70
-45 to +300
-45 to +300
-43 to +149
-43 to +149
Silicone
50
70
S595-50
S604-70
-65 to +437
-65 to +437
-53 to +225
-53 to +225
Teflon
N/A
Teflon
-300 to +500
-184 to +260
Kalrez3
82
75
91
65
1050LF
4079
3018
1058
-42 to +550
-58 to +601
-35 to +601
-40 to +500
-41 to +288
-50 to +316
-37 to +316
-40 to +260
EPR962-90D can be used on steam service to lower pressure limit of 15 psig.

Set pressure ranges from durometer table shall apply to these compounds (for nuclear service, radiation environment).
Consult factory before selecting.
Consult factory before using. For use with freon 134A/ester oil service.
Refer to Technical Section for O - Ring Selection Tables for various fluids.
1900.36
1900 (SRV-1/Q2.02)
1900
Accessories
1900 Caps, Levers, and Accessories

Lifting Mechanisms
Packed Lever
The purpose of the lifting mechanism is to open the valve when the
pressure under the valve disc is lower than the set pressure. These
mechanisms are made in three basic types: plain lever, packed lever, and
air-operated lifting device. The lifting lever may be used as follows:
(1) to lift the disc from the valve seat periodically during the operation
of equipment to be sure that the disc holder is not frozen in the guide
as a result of corrosion, coking, sulphur deposits, etc. This will ensure
protection of the unit at all times. Operating pressure under the disc should
be approximately 75% of the set pressure when lifting in accordance with
the ASME Code; otherwise the lever assembly could be damaged.
(2) to remove foreign particles which are sometimes trapped under the
seat as the valve closes. Immediate cleaning of the valve seat with the
pressure of the media, by use of the lifting lever, will correct an otherwise
leaking valve, save maintenance costs at a later date and in some cases
will avoid a shutdown of the equipment.
(3) to vent equipment to the atmosphere or discharge piping.
As indicated by the name, this lifting lever assembly is packed around

the lever shaft, so that leakage will not occur around the upper part of
the valve when the valve is open or when back pressure is present. The
packed lifting lever should be used when positive protection against
leakage is required.
Plain Lever
This lever assembly is not pressure-tight and should not be used where
back pressure is present or where the escape of vapor discharging from
an open valve is undesirable around the lever assembly.
Bolted Cap
CONSOLIDATED Standard Safety Relief Valves are supplied with screwed
caps but bolted caps are available.
Gag
The purpose of the gag is to hold the safety relief valve closed while
equipment is being subjected to an operational hydrostatic test. This
is the only purpose for which the gag is intended, and it can be
accomplished by pulling the gag hand - tight. Force should never be
used. The gag should never be left in the valve during the operation
of the equipment. It should be removed each time after using and
hung in a safe, convenient location and the sealing plug reinstated
and properly torqued.
ASME B & PVC, Section VIII, Lever

ASME Codes require that a lifting lever must be supplied with the valve for steam, air, and hot water service over 140F (60C) applications.
However, it need not be a sealed lifting mechanism. The ASME Codes do recommend that sealed lifting mechanisms be used; however, they are
not mandatory. The lifting lever may be omitted under Code Case 2203. However, Dresser requires that all orders for pressure relief valves without
levers or blowdown valves for steam, air, and water over 140F (60C) state specifically that the valves are being purchased per Code Case 2203.
The purchaser is responsible for obtaining jurisdictional authorization for use of Code Case 2203.
Thermal Relief Valves: When ASME Code stamped valves are used for thermal relief applications, the ASME Code guidelines shall be followed in
regard to lifting levers.
1900.37
1900 (SRV-1/Q2.02)
1900
Accessories
Air Cylinder
Air-Operated Lifting Device

The Air Operated Lifting Device uses an air cylinder to
obtain lifting power to open the valve from a remote
control station. Normal operation of the safety relief
valve is independent of the lifting device.
Please specify actual required conditions, otherwise
the device will be supplied to operate with at least
75% of set pressure under the disc in accordance
with the ASME Code.
Requirements for special application: valve size,
set pressure, minimum pressure at which the valve
must be kept open, air pressure for operator, or
electrical characteristics for solenoid operation.
Regulated air, not to exceed 100 psig, is required
for operation.
Mounting Stud
Stud Nut
Mounting Plate
Pin
Cap
Lever
Release Locknut
Clevis
Lifting Fork
Lever Shaft
Release Nut
Lever Shaft Collar

Collar Retaining Ring
Cap Bolt
Packing Nut
Cap Gasket
Packing Lever Nut
Spindle
Valve Position Indicators

Valve Position Indicators in general, are a micro switch apparatus used for remote indication of the opening of a Safety Relief Valve. It is designed
to activate warning devices such as control panel lights or auditory indicators. This option enhances control function of operators located in remote
control stations. Please advise voltage requirements for proper selection of micro switch when ordering.
Slotted Bonnet
Steam Jacket
Vent Bug Screen
(Available in 1900-30 bellows valve only)
Forged Body
(Sevier Service, Speical Materials,

Special Dimensions)
1900.38
1900 (SRV-1/Q4.04)
1900
Accessories
Packed Lever
As indicated by the name, this lifting lever assembly is packed around the lever shaft, so that leakage will not occur around the upper part of
the valve when the valve is open or when back pressure is present. The packed lifting lever should be used when positive protection against
leakage is required.
23
29
28
32
33
34
30
25
31
27
Plain Lever
This lever assembly is not pressure-tight and should not be used where back pressure is present or where the escape of vapor discharging from an
open valve is undesirable around the lever assembly. It is designed with either a one or two -piece lever as illustrated below. The design is based
on valve size and/or valve set pressure.
24
29
28
35
26
40
36
One -Piece Lever Design
1900.39
1900 (SRV-1/Q2.02)
Two -Piece Lever Design
1900
Accessories
Bolted Cap
CONSOLIDATED standard safety relief valves are supplied with screwed caps, but bolted caps are available.
22
25
27
Cap with Gag

The purpose of the gag is to hold the safety relief valve closed while equipment is being subjected to an operational hydrostatic test. This is the only
purpose for which the gag is intended, and it can be accomplished by pulling the gag hand -tight. Force should never be used. The gag should never
be left in the valve during the operation of the equipment. It should be removed each time after using and hung in a safe, convenient location.
37
38
39
1900.40
1900 (SRV-1/Q2.02)
1900
Accessories
Cap and Lever Construction1

Standard, Alloy, and Hastelloy Material
Cap Type
Component
Standard, A1, A2, H1, H2,

L1, M1, MB, M2, S2, T1, T2
Alloy 20
Hastelloy
A3 and A4
H3 and H4
HA
Packed Lever
23
25
27
30
32
33
34
31
28
29
Cap
Cap Bolts
Cap Gasket2
Lever
Lever Shaft
Packing
Packing Nut
Lifting Fork
Release Nut
Release Lock Nut
Carbon Steel
Carbon Steel
Soft Iron
Malleable Iron
410/416 SS
Grafoil
410/416 SS
Malleable Iron
Carbon Steel
Carbon Steel
Alloy 20
Alloy 20
Monel
Malleable Iron
410/416 SS
Grafoil
410/416 SS
Malleable Iron
Carbon Steel
Carbon Steel
Hastelloy C
Hastelloy C
Monel
Malleable Iron
410/416 SS
Grafoil
410/416 SS
Malleable Iron
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
Monel
Malleable Iron
410/416 SS
Grafoil or Graphlock
410/416 SS
Malleable Iron
Carbon Steel
Carbon Steel
Plain Lever
24
26
35
36
28
29
40
Cap
Cap Set Screw
Top Lever
Drop Lever
Release Nut
Release Lock Nut
Plain Lever (One Piece)
Malleable Iron
Carbon Steel
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Malleable Iron
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Malleable Iron
Carbon Steel
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Malleable Iron
Bolted Cap
22
25
27
Cap
Cap Bolts
Cap Gasket2
Carbon Steel
Carbon Steel
Soft Iron
Alloy 20
Alloy 20
Monel
Hastelloy C
Hastelloy C
Monel
Carbon Steel
Carbon Steel
Monel
Gag
37
38
39
Gag Bolt
Sealing Plug
Plug Gasket2
Carbon Steel
Carbon Steel
Soft Iron
Carbon Steel
Alloy 20
Monel
Carbon Steel
Hastelloy C
Monel
Carbon Steel
Carbon Steel
Monel
2 Gasket material is Monel for A2, H2, MB, M2 and S2 construction.
1900.41
1900 (SRV-1/Q2.02)
HF Alky
1900
Accessories
Cap and Lever Construction1

Monel, Stainless, and Low Temperature Material
Cap Type
Component
Monel
Stainless
Low Temperature
M3 and M4
S3 and S4
L2 and L3
Packed Lever
23
25
27
30
32
33
34
31
28
29
Cap
Cap Bolts
Cap Gasket
Lever
Lever Shaft
Packing
Packing Nut
Lifting Fork
Release Nut
Release Lock Nut
Monel
Monel K500
Monel
Malleable Iron
410/416 SS
Grafoil
410/416 SS
Malleable Iron
Carbon Steel
Carbon Steel
316 SS
B8M
Monel
Malleable Iron
316 SS
Grafoil
316 SS
316 SS
316 SS
316 SS
316 SS
B8M
Monel
Malleable Iron
410/416 SS
Grafoil
410/416 SS
316 SS
316 SS
316 SS
Plain Lever
24
26
35
36
28
29
40
Cap
Cap Set Screw
Top Lever
Drop Lever
Release Nut
Release Lock Nut
Plain Lever
N/A
N/A
N/A
N/A
N/A
N/A
N/A
316 SS
316 SS
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Malleable Iron
316 SS
316 SS
Malleable Iron
Malleable Iron
Carbon Steel
Carbon Steel
Malleable Iron
Bolted Cap
22 Cap
25 Cap Bolts
27 Cap Gasket
Monel
Monel K500
Monel
316 SS
B8M
Monel
Gag
37 Gag Bolt
38 Sealing Plug
39 Plug Gasket
Carbon Steel
Monel
Monel
Carbon Steel
316 SS
Monel
316 SS
B8M
Monel
Carbon Steel
316 SS
Monel
NOTE: 1 The materials in red denote variation from standard material construction.
1900.42
1900 (SRV-1/Q2.02)
1900
Accessories
Bolt-on Jackets
Jacketing of Relief Valves
CONSOLIDATED valve offers simple solutions to your heating problems:
Bolt-on Jackets.
Viscous materials that freeze or harden in relief valve nozzles create
hazardous conditions. Process pipe jacketing or tracing may not provide
sufficient heat to the area in and around the relief valve seat. During a
pressure surge, some of the solid materials may stick in and around the
seating area, keeping the valve from functioning and re-seating properly.
This would result in leakage around the valve seating surface.
The solution to this problem is the Bolt-on Jacket. This jacket is a two
piece aluminum casting with a steel pressure chamber embedded in
the aluminum jacket casting. The pressure chamber is fabricated of
standard pressure vessel materials for various heating fluids and service
temperatures. The chamber is designed and tested in accordance with
the ASME B & PVC, Section VIII, Div. I. The jacket casting conducts heat
from the pressure chamber and rapidly distributes it evenly over the outer
surface of the relief valve.
The aluminum casting distributes heat only. It carries no pressure load at
any time. Heating fluid is transferred from one half of the jacket to the
other by an external connector. A thin layer of heat transfer cement is
used between the jacket and the relief valve to promote effective heat
transfer by filling any air gaps between the jacket and the relief valve.
Bolt-on Jacket halves bolt together for quick installation and unbolt for
ready access to the relief valve for easy maintenance. The jackets cover
the jacket fully from flange to flange providing uniform heat to all process
wetted surfaces. Standard service ratings for the jacket are 150 psig and
500F. Higher ratings are available upon request.
Bolt-on Jackets may be ordered with adjacent flange coverage and with a
variety of heating medium connections. Canadian Registration is available
for all provinces.
Bolt-on Jackets are operating successfully on relief valves in many
different process service applications world wide. Customers should
consider jacketing the relief valves whenever the adjacent vessel or
piping is heated in some manner. The following lists process applications
that typically require jacketing of the relief valve.
1900.43
1900 (SRV-1/Q2.02)
Acrylic Acid
Ammonium Nitrate
Coal Tars
Caprolactam
Cyanuric Chloride
DMT
DNT
Fluoropolymers
LLDPE
Olefins
Phosphorous
Polypropylene
Polystyrene Resins
Phthalic Anhydride
Sulphuric Acid
Sulphur Dioxide
Some Surfactants
Tall Oils
TMA
1900
Accessories
Typical Bolt-on Jacket
To ensure we provide the proper jacket coverage; please answer the following questions:
(1) Is the process operating at elevated temperatures?
(2) What is the process?
(3) What is the temperature of the process being maintained?
(4) What heating medium is being used in your jacket? What pressure and temperature is this medium?
(5) What type of jacket connections are required?
(6) How is the temperature being maintained on the process piping and other equipment (valves, pumps, meters, etc.)?
The relief valve will probably need a Bolt - on Jacket if it is operating in one of the process services listed above or if the adjacent piping
and equipment is heated.
Contact the Factory for assistance.
1900.44
1900 (SRV-1/Q2.02)
1900
Dimensions & Weights
1900 Flanged Series

This table applies to the standard 1900 Series regardless of materials
of construction.
The tables state the inlet flange size of the valve and the flange rating
followed by the outlet flange size and the flange rating.
If the valve you are reviewing has an inlet or outlet size different from that
stated, the dimensions A through S and weight may not apply.
NOTE: USCS Units refers to U.S. Customary System Units, the adapted U.S.
standard formerly recognized as English Units.
EXAMPLE: 1 - 150 x 2 - 150

Inlet is 1" size with a Class 150 flange. Outlet is 2" size with a Class
150 flange.
1900
Conventional
Valve
D
C
Drain
S
1900.45
1900 (SRV-1/Q4.04)
1900
1900 Series Valves

USCS Dimensions (in.) and Weights (lbs.)
Size (in.) and Class
Type
1 - 150 x 2 - 150
1 - 150 x 2 - 150
1-1/2 - 150 x 2 - 150
1-1/2 - 150 x 3 - 150*
1-1/2 - 150 x 3 - 150
2 - 150 x 3 - 150
3 - 150 x 4 - 150
3 - 150 x 4 - 150
4 - 150 x 6 - 150
4 - 150 x 6 - 150
4 - 150 x 6 - 150
6 - 150 x 8 - 150
6 - 150 x 8 - 150
8 - 150 x 10 - 150
10 - 150 x 14 - 150
12 - 150 x 16 - 150
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150*
1-1/2 - 300 x 3 - 150
2 - 300 x 3 - 150
3 - 300 x 4 - 150
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
6 - 300 x 8 - 150
6 - 300 x 8 - 150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 - 300 x 16 - 150
1905D
1905E
1905F
1905G
1905H
1905J
1905K
1905L
1905M
1905N
1905P
1905Q
1905R
1905T
1905V
1905W
1906D
1906E
1906F
1906G
1906H
1906J
1906K
1906L
1906M
1906N
1906P
1906Q
1906R
1906T
1906V
1906W
4-1/8
4-1/8
4-7/8
4-7/8
5-1/8
5-3/8
6-1/8
6-1/8
7
7-3/4
7-1/8
9-7/16
9-7/16
10-7/8
12
14
4-1/8
4-1/8
4-7/8
4-7/8
5-1/8
5-3/8
6-1/8
6-1/8
7
7-3/4
7-1/8
9-7/16
9-7/16
10-7/8
12
14
4-1/2
4-1/2
4-3/4
4-3/4
4-7/8
4-7/8
6-3/8
6-1/2
7-1/4
8-1/4
9
9-1/2
9-1/2
11
16
16
4-1/2
4-1/2
4-3/4
4-3/4
4-7/8
4-7/8
6-3/8
6-1/2
7-1/4
8-1/4
9
9-1/2
9-1/2
11
16
16
NOTE:
C
STD
Bellows
17
17
17-3/4
17-3/4
19-1/2
21-1/4
24-1/2
28-3/4
29-3/4
33
34-1/4
41
43
47-1/2
62
70
17
17
17-3/4
17-3/4
19-1/2
21-1/4
24-1/2
28-3/4
29-3/4
33
34-1/4
41
43
47-1/4
62
70
18
18
18-3/4
19
19-1/2
21-1/4
24-1/2
28-3/4
29-3/4
33
34-1/4
41
43
47-1/2
62
70
18
18
18-3/4
19
19-1/2
21-1/4
24-1/2
28-3/4
29-3/4
33
34-1/4
41
43
47-1/4
62
70
Approx.
Weight (lbs.)
5-7/16
5-7/16
5-7/16
5-7/16
6-5/16
6-7/8
7-3/8
8-7/8
9-3/8
10-1/8
11
13-5/8
14-1/2
16-1/2
21-3/4
24-1/2
5-7/16
5-7/16
5-7/16
5-7/16
6-5/16
6-7/8
7-3/8
8-7/8
9-3/8
10-1/8
11
13-5/8
14-1/2
16-1/2
21-3/4
24-1/2
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-5/16
1-7/16
1-7/16
1-5/8
1-5/8
1-5/8
1-13/16
1-13/16
1-15/16
2
2-13/16
1-3/8
1-3/8
1-1/2
1-1/2
1-9/16
1-9/16
1-13/16
1-13/16
1-15/16
1-15/16
1-15/16
2-1/4
2-1/4
2-7/16
2-11/16
2-15/16
40
40
45
55
60
75
110
140
185
220
260
430
495
620
1600
2800
40
40
45
55
60
75
115
145
190
225
270
445
510
640
1700
2860
Inlet and outlet combinations as well as orifices sizes shown in the table above are compliant with both API Standard 526, Third Edition, 1984 and Fourth
Edition, 1995, except those sizes marked * comply only with API 526, Fourth Edition, 1995. For replacement valves that do not comply with both editions,
contact the factory for verification of dimensions and inlet and outlet combinations. The V & W orifice valves are not an API approved orifice size.
Drain
S
B
1900.46
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150*
2 - 300 x 3 - 150
3 - 300 x 4 - 150*
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
6 - 300 x 8 - 150
6 - 300 x 10 - 150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 - 300 x 16 -150
1 - 600 x 2 - 150
1 - 600 x 2 - 150
1-1/2 - 600 x 2 - 150
1-1/2 - 600 x 3 - 150*
2 - 600 x 3 - 150
3 - 600 x 4 - 150*
3 - 600 x 4 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
6 - 600 x 8 - 150
6 - 600 x 10 - 150
1910D
1910E
1910F
1910G
1910H
1910J
1910K
1910L
1910M
1910N
1910P
1910Q
1910R
1910T
1910V
1910W
1912D
1912E
1912F
1912G
1912H
1912J
1912K
1912L
1912M
1912N
1912P
1912Q
1912R
4-1/8
4-1/8
4-7/8
4-7/8
5-1/8
7-1/4
6-1/8
7-1/16
7
7-3/4
8-7/8
9-7/16
9-7/16
10-7/8
12
14
4-1/8
4-1/8
4-7/8
4-7/8
6-1/16
7-1/4
7-1/4
7-1/16
7
7-3/4
8-7/8
9-7/16
9-7/16
4-1/2
4-1/2
6
6
4-7/8
7-1/8
6-3/8
7-1/8
7-1/4
8-1/4
10
9-1/2
10-1/2
11
16
16
4-1/2
4-1/2
6
6
6-3/8
7-1/8
7-1/8
8
8
8-3/4
10
9-1/2
10-1/2
NOTE:
C
STD
Bellows
17-1/2
17-1/2
18-1/4
18-1/4
20-1/4
25-5/8
28
32
32
34-1/4
41
43-1/4
45-1/2
53-3/8
66
70
18-1/4
18-1/4
19
19
23
29-7/8
29-1/4
32
36-1/4
39
43-1/2
46
47-1/2
18-1/2
18-1/2
19-1/4
19-1/2
20-1/4
25-5/8
28
32
32
34-1/4
41
43-1/4
45-1/2
53-3/8
66
70
19-1/4
19-1/4
20
20-1/4
23
29-7/8
29-1/4
32
36-1/4
39
43-1/2
46
47-1/2
Approx.
Weight (lbs.)
5-7/16
5-7/16
5-7/16
5-7/16
6-5/16
7-3/8
7-3/4
9-1/2
9-3/8
10-1/2
11-1/2
14
14-1/2
16-1/2
24-1/2
24v1/2
6-5/16
6-5/16
6-5/16
6-5/16
7
9
7-3/4
9-1/2
10-3/4
11-3/4
13-7/8
14-1/4
15-1/8
1-3/8
1-3/8
1-9/16
1-9/16
1-11/16
1-13/16
1-15/16
1-15/16
1-15/16
1-15/16
1-15/16
2-1/4
2-1/4
2-7/16
2-11/16
2-15/16
1-3/8
1-3/8
1-9/16
1-9/16
1-11/16
1-13/16
1-15/16
2-3/16
2-3/16
2-3/16
2-3/16
2-11/16
2-11/16
50
50
50
60
65
100
140
220
230
260
350
530
550
840
2000
2860
55
55
60
65
85
170
150
230
300
360
530
645
675
Drain
S
B
1900.47
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1-1/2 - 900 x 2 - 300

1-1/2 - 900 x 2 - 300
1-1/2 - 900 x 3 - 300*
1-1/2 - 900 x 3 - 300*
2 - 900 x 3 - 150
3 - 900 x 4 - 150
3 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 3 - 300*
2 - 1500 x 3 - 300
2 - 1500 x 3 - 300
3 - 1500 x 4 - 300
3 - 1500 x 6 - 300
4 - 1500 x 6 - 150
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
2 - 2500 x 3 - 300
1914D
1914E
1914F
1914G
1914H
1914J
1914K
1914L
1914M
1914N
1914P
1916D
1916E
1916F
1916G
1916H
1916J
1916K
1916L
1918D
1918E
1918F
1918G
4-1/8
4-1/8
4-7/8
4-7/8
6-1/16
7-1/4
7-13/16
7-3/4
7-3/4
7-3/4
8-7/8
4-1/8
4-1/8
4-7/8
6-1/8
6-1/16
7-1/4
7-3/4
7-3/4
5-1/2
5-1/2
5-1/2
6-1/8
5-1/2
5-1/2
6-1/2
6-1/2
6-3/8
7-1/8
8-1/2
8-3/4
8-3/4
8-3/4
10
5-1/2
51/2
6-1/2
6-3/4
6-3/8
7-1/8
8-1/2
8-3/4
7
7
7
6-3/4
NOTE:
C
STD
Bellows
21-3/4
21-3/4
22-1/2
22-1/2
26
29-3/4
35-1/4
37-1/4
37
39
43-1/2
21-3/4
21-3/4
22-1/2
23-3/4
26
29-3/4
35-1/4
37-1/4
26-1/2
26-1/2
26-1/2
23-3/4
22-3/4
22-3/4
23-1/2
23-3/4
26
29-3/4
35-1/4
37-1/4
37
39
43-1/2
22-3/4
22-3/4
23-1/2
25
26
29-3/4
35-1/4
37-1/4
27-1/2
27-1/2
27-1/2
25
Approx.
Weight (lbs.)
7-13/16
7-13/16
7-13/16
7-13/16
8-1/4
9
10-1/2
12-1/4
10-3/4
11-3/4
13-7/8
7-13/16
7-13/16
7-13/16
7-13/16
8-1/4
9
10-1/2
12-1/4
8-7/8
8-7/8
8-7/8
7-13/16
1-15/16
1-15/16
1-15/16
1-15/16
2-3/16
2-3/16
2-3/16
2-7/16
2-7/16
2-7/16
2-7/16
1-15/16
1-15/16
1-15/16
2-3/16
2-3/16
2-9/16
2-9/16
2-13/16
2-7/16
2-7/16
2-7/16
2-11/16
95
95
100
95
130
195
300
360
340
380
545
95
95
100
100
140
220
320
370
150
150
150
110
Drain
S
B
1900.48
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150*
2 - 300 x 3 - 150
3 - 300 x 4 - 150*
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
6 - 300 x 8 - 150
6 - 300 x 8 - 150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 - 300 x 16 - 150
1 - 600 x 2 - 150
1 - 600 x 2 - 150
1-1/2 - 600 x 2 - 150
1-1/2 - 600 x 3 - 150*
2 - 600 x 3 - 150
3 - 600 x 4 - 150*
3 - 600 x 4 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
6 - 600 x 8 - 150
6 - 600 x 10 - 150
4 - 600 x 6 - 150
1920D
1920E
1920F
1920G
1920H
1920J
1920K
1920L
1920M
1920N
1920P
1920Q
1920R
1920T
1920V
1920W
1922D
1922E
1922F
1922G
1922H
1922J
1922K
1922L
1922M
1922N
1922Q
1922R
1923P
4-1/8
4-1/8
4-7/8
4-7/8
5-1/8
7-1/4
6-1/8
7-1/16
7
7-3/4
8-7/8
9-7/16
9-7/16
10-7/8
12
14
4-1/8
4-1/8
4-7/8
4-7/8
5-1/8
7-1/4
6-1/8
7-1/16
7
7-3/4
9-7/16
9-7/16
8-7/8
4-1/2
4-1/2
6
6
4-7/8
7-1/8
6-3/8
7-1/8
7-1/4
8-1/4
10
9-1/2
9-1/2
11
16
16
4-1/2
4-1/2
6
6
4-7/8
7-1/8
6-3/8
8
8
8-3/4
9-1/2
10-1/2
10
NOTE:
C
STD
Bellows
17-1/2
17-1/2
18-1/4
18-1/4
20-1/4
25-5/8
28
32
32
34-1/4
41
41
43
53-3/8
66
70
17-1/2
17-1/2
18-1/4
19
20-1/4
25-5/8
28
32
36-1/4
39
46
47-1/2
43-1/2
18-1/2
18-1/2
19-1/4
19-1/2
20-1/4
25-5/8
28
32
32
34-1/4
41
41
43
53-3/8
66
70
18-1/2
18-1/2
19-1/4
20-1/4
20-1/4
25-5/8
28
32
36-1/4
39
46
47-1/2
43-1/2
Approx.
Weight
5-7/16
5-7/16
5-7/16
5-7/16
6-5/16
7-3/8
7-3/4
9-1/2
9-3/8
10-1/2
11-1/2
13-5/8
14-1/2
16-1/2
24-1/2
24-1/2
5-7/16
5-7/16
5-7/16
6-5/16
6-5/16
7-3/8
7-3/4
9-1/2
10-3/4
11-3/4
14-1/4
15-1/8
13-7/8
1-3/8
1-3/8
1-9/16
1-9/16
1-11/16
1-13/16
1-15/16
1-15/16
1-15/16
1-15/16
1-15/16
2-1/4
2-1/4
2-7/16
2-11/16
2-15/16
1-3/8
1-3/8
1-9/16
1-9/16
1-11/16
1-13/16
1-15/16
2-3/16
2-3/16
2-3/16
2-11/16
2-11/16
2-3/16
50
50
50
60
65
100
140
220
230
260
350
445
510
840
2000
2860
50
50
50
65
65
100
140
230
300
360
645
675
530
Drain
S
B
1900.49
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1-1/2 - 900 x 2 - 300

1-1/2 - 900 x 2 - 300
1-1/2 - 900 x 3 - 300*
1-1/2 - 900 x 3 - 300*
2 - 900 x 3 - 150
3 - 900 x 4 - 150*
3 - 900 x 6 - 150*
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 3 - 300*
2 - 1500 x 3 - 300
2 - 1500 x 3 - 300
3 - 1500 x 4 - 300
3 - 1500 x 6 - 300
4 - 1500 x 6 - 150
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
2 - 2500 x 3 - 300
1924D
1924E
1924F
1924G
1924H
1924J
1924K
1924L
1924M
1924N
1924P
1926D
1926E
1926F
1926G
1926H
1926J
1926K
1926L
1928D
1928E
1928F
1928G
4-1/8
4-1/8
4-7/8
4-7/8
6-1/16
7-1/4
7-13/16
7-3/4
7-3/4
7-3/4
8-7/8
4-1/8
4-1/8
4-7/8
6-1/8
6-1/16
7-1/4
7-3/4
7-3/4
5-1/2
5-1/2
5-1/2
6-1/8
5-1/2
5-1/2
6-1/2
6-1/2
6-3/8
7-1/8
8-1/2
8-3/4
8-3/4
8-3/4
10
5-1/2
5-1/2
6-1/2
6-3/4
6-3/8
7-1/8
8-1/2
8-3/4
7
7
7
6-3/4
NOTE:
C
STD
Bellows
21-3/4
21-3/4
22-1/2
22-1/2
23
29-7/8
35-1/4
37-1/4
37
39
43-1/2
21-3/4
21-3/4
22-1/2
23-3/4
26
29-3/4
35-1/4
37-1/4
26-1/2
26-1/2
26-1/2
23-3/4
22-3/4
22-3/4
23-1/2
23-3/4
23
29-7/8
35-1/4
37-1/4
37
39
43-1/2
22-3/4
22-3/4
23-1/2
25
26
29-3/4
35-1/4
37-1/4
27-1/2
27-1/2
27-1/2
25
Approx.
Weight (lbs.)
7-13/16
7-13/16
7-13/16
7-13/16
7
9
10-1/2
12-1/4
10-3/4
11-3/4
13-7/8
7-13/16
7-13/16
7-13/16
7-13/16
8-1/4
9
10-1/2
12-1/4
8-7/8
8-7/8
8-7/8
7-13/16
1-15/16
1-15/16
1-15/16
1-15/16
2-3/16
2-5/16
2-3/16
2-7/16
2-7/16
2-7/16
2-7/16
1-15/16
1-15/16
1-15/16
2-3/16
2-3/16
2-9/16
2-9/16
2-13/16
2-7/16
2-7/16
2-7/16
2-11/16
95
95
100
95
90
180
300
360
340
380
545
95
95
100
100
140
220
320
370
150
150
150
110
Drain
S
B
1900.50
1900 (SRV-1/Q2.02)
1900
1900 Series Valves

Metric Dimensions (mm) and Weights (Kg)
Type
1 - 150 x 2 - 150
1 - 150 x 2 - 150
1-1/2 - 150 x 2 - 150
1-1/2 - 150 x 3 - 150
1-1/2 - 150 x 3 - 150
2 - 150 x 3 - 150
3 - 150 x 4 - 150
3 - 150 x 4 - 150
4 - 150 x 6 - 150
4 - 150 x 6 - 150
4 - 150 x 6 - 150
6 - 150 x 8 - 150
6 - 150 x 8 - 150
8 - 150 x 10 - 150
10 - 150 x 14 - 150
12 - 150 x 16 - 150
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150
1-1/2 - 300 x 3 - 150
2 - 300 x 3 - 150
3 - 300 x 4 - 150
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 -150
6 - 300 x 8 - 150
6 - 300 x 8 -150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 -300 x 16 - 150
1905D
1905E
1905F
1905G
1905H
1905J
1905K
1905L
1905M
1905N
1905P
1905Q
1905R
1905T
1905V
1905W
104.8
104.8
123.8
123.8
130.2
136.5
155.6
155.6
177.8
196.9
181
239.7
239.7
276.2
304.8
355.6
104.8
104.8
123.8
123.8
130.2
136.5
155.6
155.6
177.8
196.9
181
239.7
239.7
276.2
304.8
355.6
114.3
114.3
120.7
120.7
123.8
123.8
161.9
165.1
184.2
209.6
228.6
241.3
241.3
279.4
406.4
406.4
114.3
114.3
120.7
120.7
123.8
123.8
161.9
165.1
184.2
209.6
228.6
241.3
241.3
279.4
406.4
406.4
NOTE:
1906D
1906E
1906F
1906G
1906H
1906J
1906K
1906L
1906M
1906N
1906P
1906Q
1906R
1906T
1906V
1906W
C
STD
Bellows
431.8
431.8
450.9
450.9
495.3
539.8
622.3
730.3
755.7
838.2
870
1041.4
1092.2
1206.5
1574.8
1778
431.8
431.8
450.9
450.9
495.3
539.8
622.3
730.3
755.7
938.2
870
1041.4
1092.2
1200.2
1574.8
1778
457.2
457.2
476.3
482.6
495.3
539.8
622.3
730.3
755.7
838.2
870
1041.4
1092.2
1206.5
1574.8
1778
457.2
457.2
476.3
482.6
495.3
539.8
622.3
730.3
755.7
838.2
870
1041.4
1092.2
1200.2
1574.8
1778
Approx.
Weight (Kg)
138.1
138.1
138.1
138.1
160.3
174.6
187.3
225.4
238.1
257.2
279.4
346.1
368.3
419.1
552.5
622.3
138.1
138.1
138.1
138.1
160.3
174.6
187.3
225.4
238.1
257.2
279.4
346.1
368.3
419.1
552.5
622.3
28.6
28.6
31.8
31.8
31.8
33.3
36.5
36.5
41.3
41.3
41.3
46
46
49.2
50.8
55.6
34.9
34.9
38.1
38.1
39.7
39.7
46
46
49.2
49.2
49.2
57.2
57.2
61.9
68.3
74.6
18.1
18.1
20.4
24.9
27.2
34
49.9
63.5
83.9
99.8
117.9
195
224.5
281.2
725.8
1270.1
18.1
18.1
20.4
24.9
27.2
34
52.2
65.8
86.2
102.1
122.5
201.9
231.3
290.3
770.1
1300
Drain
S
1900.51
B
1900 (SRV-1/Q2.02)
1900
1900 Series Valves

Type
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150
2 - 300 x 3 - 150
3 - 300 x 4 - 150
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
6 - 300 x 8 - 150
6 - 300 x 10 - 150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 - 300 x 16 -150
1 - 600 x 2 - 150
1 - 600 x 2 - 150
1-1/2 - 600 x 2 - 150
1-1/2 - 600 x 3 - 150
2 - 600 x 3 - 150
3 - 600 x 4 - 150
3 - 600 x 4 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
6 - 600 x 8 - 150
6 - 600 x 10 - 150
1910D
1910E
1910F
1910G
1910H
1910J
1910K
1910L
1910M
1910N
1910P
1910Q
1910R
1910T
1910V
1910W
1912D
1912E
1912F
1912G
1912H
1912J
1912K
1912L
1912M
1912N
1912P
1912Q
1912R
104.8
104.8
123.8
123.8
130.2
184.2
155.6
179.4
177.8
196.9
225.4
239.7
239.7
276.2
304.8
355.6
104.8
104.8
123.8
123.8
154
184.2
184.2
179.4
177.8
196.9
225.4
239.7
239.7
114.3
114.3
152.4
152.4
123.8
181
161.9
181
184.2
209.6
254
241.3
266.7
279.4
406.4
406.4
114.3
114.3
152.4
152.4
161.9
181
181
203.2
203.2
222.3
254
241.3
266.7
NOTE:
C
STD
Bellows
444.5
444.5
463.6
463.6
514.4
651
711.2
812.8
812.8
870
1041.4
1098.6
1155.7
1355.7
1676.4
1778
463.6
463.6
482.6
482.6
584.2
759
743
812.8
920.8
990.6
1104.9
1168.4
1206.5
469.9
469.9
489
495.3
514.4
651
711.2
812.8
812.8
870
1041.4
1098.6
1155.7
1355.7
1676.4
1778
489
489
508
514.4
584.2
759
743
812.8
920.8
990.6
1104.9
1168.4
1206.5
Approx.
Weight (Kg)
138.1
138.1
138.1
138.1
160.3
187.3
196.9
241.3
238.1
266.7
292.1
355.6
368.3
419.1
622.3
622.3
160.3
160.3
160.3
160.3
177.8
228.6
196.9
241.3
273.1
298.5
352.4
362
384.2
34.9
34.9
39.7
39.7
42.8
46
49.2
49.2
49.2
49.2
49.2
57.2
57.2
61.9
68.3
74.6
34.9
34.9
39.7
39.7
42.8
46
49.2
55.5
55.5
55.5
55.5
68.3
68.3
22.7
22.7
22.7
27.2
29.5
45.4
63.5
99.8
104.3
117.9
158.8
240.4
249.5
381
907.2
1300
25
25
27.2
29.5
38.6
77.1
68
104.3
136.1
163.3
240.4
292.6
306.5
Drain
S
B
1900.52
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1-1/2 - 900 x 2 - 300

1-1/2 - 900 x 2 - 300
1-1/2 - 900 x 3 - 300*
1-1/2 - 900 x 3 - 300*
2 - 900 x 3 - 150
3 - 900 x 4 - 150
3 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 3 - 300*
2 - 1500 x 3 - 300
2 - 1500 x 3 - 300
3 - 1500 x 4 - 300
3 - 1500 x 6 - 300
4 - 1500 x 6 - 150
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
2 - 2500 x 3 - 300
1914D
1914E
1914F
1914G
1914H
1914J
1914K
1914L
1914M
1914N
1914P
1916D
1916E
1916F
1916G
1916H
1916J
1916K
1916L
1918D
1918E
1918F
1918G
104.8
104.8
123.8
123.8
154
184.2
198.4
196.9
196.9
196.9
225.4
104.8
104.8
123.8
155.6
154
184.2
196.9
196.9
139.7
139.7
139.7
155.6
139.7
139.7
165.1
165.1
161.9
181
215.9
222.3
222.3
222.3
254
139.7
139.7
165.1
171.5
161.9
181
215.9
222.3
177.8
177.8
177.8
171.5
NOTE:
C
STD
Bellows
552.5
552.5
571.5
571.5
660.4
755.7
895.4
946.2
939.8
990.6
1104.9
552.5
552.5
571.5
603.3
660.4
755.7
895.4
946.2
673.1
673.1
673.1
603.3
577.9
577.9
596.9
603.3
660.4
755.7
895.4
946.2
939.8
990.6
1104.9
577.9
577.9
596.9
635.5
660.4
755.7
895.4
946.2
698.5
698.5
698.5
635
Approx.
Weight (Kg)
198.4
198.4
198.4
198.4
209.6
228.6
266.7
311.2
273.1
298.5
352.4
198.4
198.4
198.4
198.4
209.6
228.6
266.7
311.2
225.4
225.4
225.4
198.4
49.2
49.2
49.2
49.2
55.5
55.5
55.5
61.9
61.9
61.9
61.9
49.2
49.2
49.2
55.5
55.5
65.1
65.1
71.4
61.9
61.9
61.9
68.2
43.1
43.1
45.4
43.1
59
88.5
136.1
163.3
154.2
172.4
247.2
43.1
43.1
45.4
45.4
63.5
99.8
145.2
167.8
68
68
68
49.9
Drain
S
B
1900.53
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1 - 300 x 2 - 150
1 - 300 x 2 - 150
1-1/2 - 300 x 2 - 150
1-1/2 - 300 x 3 - 150*
2 - 300 x 3 - 150
3 - 300 x 4 - 150*
3 - 300 x 4 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
4 - 300 x 6 - 150
6 - 300 x 8 - 150
6 - 300 x 8 - 150
8 - 300 x 10 - 150
10 - 300 x 14 - 150
12 - 300 x 16 - 150
1 - 600 x 2 - 150
1 - 600 x 2 - 150
1-1/2 - 600 x 2 - 150
1-1/2 - 600 x 3 - 150*
2 - 600 x 3 - 150
3 - 600 x 4 - 150*
3 - 600 x 4 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
4 - 600 x 6 - 150
6 - 600 x 8 - 150
6 - 600 x 10 - 150
4 - 600 x 6 - 150
1920D
1920E
1920F
1920G
1920H
1920J
1920K
1920L
1920M
1920N
1920P
1920Q
1920R
1920T
1920V
1920W
1922D
1922E
1922F
1922G
1922H
1922J
1922K
1922L
1922M
1922N
1922Q
1922R
1923P
104.8
104.8
123.8
123.8
130.2
184.2
155.6
179.4
177.8
196.9
225.4
239.7
239.7
276.2
304.8
355.6
104.8
104.8
123.8
123.8
130.2
184.2
155.6
179.4
177.8
196.9
239.7
239.7
225.4
NOTE:
B
114.3
114.3
152.4
152.4
123.8
181
161.9
181
184.2
209.6
254
241.3
241.3
279.4
406.4
406.4
114.3
114.3
152.4
152.4
123.8
181
161.9
203.2
203.2
222.3
241.3
266.7
254
STD
Bellows
444.5
444.5
463.6
463.6
514.4
651
711.2
812.8
812.8
870
1041.4
1041.4
1092.2
1355.7
1676.4
1778
444.5
444.5
463.6
482.6
514.4
651
711.2
812.8
920.8
990.6
1168.4
1206.5
1104.9
469.9
469.9
489
495.3
514.4
651
711.2
812.8
812.8
870
1041.4
1041.4
1092.2
1355.7
1676.4
1778
469.9
469.9
489
514.4
514.4
651
711.2
812.8
920.8
990.6
1168.4
1206.5
1104.9
138.1
138.1
138.1
138.1
160.3
187.3
196.9
241.3
238.1
266.7
292.1
346.1
368.3
419.1
622.3
622.3
138.1
138.1
138.1
160.3
160.3
187.3
196.9
241.3
273.1
298.5
362
384.2
352.4
34.9
34.9
39.7
39.7
42.8
46
49.2
49.2
49.2
49.2
49.2
57.2
57.2
61.9
68.3
74.6
34.9
34.9
39.7
39.7
42.8
46
49.2
55.5
55.5
55.5
68.3
68.3
55.5
Approx.
Weight (Kg)
22.7
22.7
22.7
27.2
29.5
45.4
63.5
99.8
104.3
117.9
158.8
201.9
231.3
381
907.2
1300
22.7
22.7
22.7
29.5
29.5
45.4
63.5
104.3
136.1
163.3
292.6
306.2
240.4
Drain
S
B
1900.54
1900 (SRV-1/Q2.02)
1900
1900 Series Valves
Type
1-1/2 - 900 x 2 - 300

1-1/2 - 900 x 2 - 300
1-1/2 - 900 x 3 - 300*
1-1/2 - 900 x 3 - 300*
2 - 900 x 3 - 150
3 - 900 x 4 - 150*
3 - 900 x 6 - 150*
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
4 - 900 x 6 - 150
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 2 - 300
1-1/2 - 1500 x 3 - 300*
2 - 1500 x 3 - 300
2 - 1500 x 3 - 300
3 - 1500 x 4 - 300
3 - 1500 x 6 - 300
4 - 1500 x 6 - 150
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
1-1/2 - 2500 x 3 - 300*
2 - 2500 x 3 - 300
1924D
1924E
1924F
1924G
1924H
1924J
1924K
1924L
1924M
1924N
1924P
1926D
1926E
1926F
1926G
1926H
1926J
1926K
1926L
1928D
1928E
1928F
1928G
104.8
104.8
123.8
123.8
154
184.2
198.4
196.9
196.9
196.9
225.4
104.8
104.8
123.8
155.6
154
184.2
196.9
196.9
139.7
139.7
139.7
155.6
139.7
139.7
165.1
165.1
161.9
181
215.9
222.3
222.3
222.3
254
139.7
139.7
165.1
171.5
161.9
181
215.9
222.3
177.8
177.8
177.8
171.5
NOTE:
C
STD
Bellows
552.5
552.5
571.5
571.5
584.2
759
895.4
946.2
939.8
990.6
1104.9
552.5
552.5
571.5
603.3
660.4
755.7
895.4
946.2
673.1
673.1
673.1
603.3
577.9
577.9
596.9
603.3
584.2
759
895.4
946.2
939.8
990.6
1104.9
577.9
577.9
596.9
635
660.4
755.7
895.4
946.2
698.5
698.5
698.5
635
Approx.
Weight (Kg)
198.4
198.4
198.4
198.4
177.8
228.6
266.7
311.2
273.1
298.5
352.4
198.4
198.4
198.4
198.4
209.6
228.6
266.7
311.2
225.4
225.4
225.4
198.4
49.2
49.2
49.2
49.2
55.5
58.7
55.5
61.9
61.9
61.9
61.9
49.2
49.2
49.2
55.5
55.5
65.1
65.1
71.4
61.9
61.9
61.9
68.2
43.1
43.1
45.4
43.1
40.8
81.6
136.1
163.3
154.2
172.4
247.2
43.1
43.1
45.4
45.4
63.5
99.8
145.2
167.8
68
68
68
49.9
Drain
S
B
1900.55
1900 (SRV-1/Q4.04)
1900
Pressure / Temperature
API Pressure / Temperature Tables

How To Use Rating Tables
Procedure
The included tables specify important data about the valve including valve
sizes, flange ratings, pressure and temperature limits, back pressure
ratings, and materials with allowable temperature ranges.
After determining valve size from the Valve Sizing section, or capacity
tables in this section, select the proper set of tables and graphs (in the
following pages) for the size valve. Enter the pressure/temperature
graphs and determine valve type. Review the table of data for that size
valve to get other pertinent information.
Example
Valve Set Pressure
Back Pressure
Temperature
Valve
500 psig
50 psig
100F
J
Enter the graph on page 1900.68 for the J size, select set pressure
on the bottom scale at 500 psig, follow this line vertically upward until it
intersects the 100F (38C) line. The selection is a 1910Jc valve.
NOTES: 1 The pressure/temperature limitations shown in the following tables are

based on the limits specified in API526 applicable to the 1900 series
supplied in standard materials of construction. For pressure/temperature
limitations of valves made from special materials, consult the factory or the
SRVS sizing program. (Note that 1900-30 bellows design valve supplied
with the standard Inconel 625 LCF bellows is limited to a temperature range
of -400F to 1500F.)
Results
Referring to the table on page 1900.67, the valve is 3" - 300 x 4"
- 150 with a carbon steel body and spring. The back pressure limit is
satisfactory for 50 psig back pressure.
Springs
2 ASME Class 300 outlet flanges are permitted for mating purposes only
on valves that are normally supplied with standard ASME Class 150
pressure rating. For back pressure applications exceeding the ASME Class
150 pressure rating use SRVS sizing program or contact the factory for
assistance.
Within given temperature limits, alloy steel springs are specified.

Because of material availability from vendors, most springs are of
alloy steel construction which provides superior strength and corrosion
resistant properties.
3 When soft seats are used, they may govern the valve pressure/temperature
rating.
Materials
The operating temperature should be used to select the materials in
valves for fire sizing applications.
Minimum Set Pressures
The minimum set pressures of the 1900 flanged

valves
Orifice
D
E
F
G
H
J
K
L
M
N
P
Q
R
T
V
W
Low Set Pressure Limit2

Conventional Valve
Bellows Valve1
(psig)
(psig)
5
5
5
4
4
5
5
6
6
9
7
7
7
9
15
7
15
15
15
15
15
10
10
10
10
10
10
10
10
10
15
15
NOTES: 1 The bonnet must be vented when a bellows is used.

2 Valves with set pressure less than 15 psig cannot be stamped with the ASME stamp.
1900.56
1900 (SRV-1/Q4.05)
1900.57
Bellows
1905-30Dc
1906-30Dc
1910-30Dc
1912-30Dc
1914-30Dc
1916-30Dc
1918-30Dc
1905-30Dt
1906-30Dt
1910-30Dt
1912-30Dt
1914-30Dt
1916-30Dt
1918-30Dt
1920-30Dt
1922-30Dt
1924-30Dt
1926-30Dt
1928-30Dt
1905-30D/L1
1906-30D/L1
1910-30D/L1
1912-30D/L1
1914-30D/L1
1916-30D/L1
1918-30D/L1
1905-30D/L2
1906-30D/L2
1910-30D/L2
1912-30D/L2
1914-30D/L2
1916-30D/L2
1918-30D/L2
1905-30D/L3
1906-30D/L3
1910-30D/L3
1912-30D/L3
1914-30D/L3
1916-30D/L3
1918-30D/L3
Standard
1905Dc
1906Dc
1910Dc
1912Dc
1914Dc
1916Dc
1918Dc
1905Dt
1906Dt
1910Dt
1912Dt
1914Dt
1916Dt
1918Dt
1920Dt
1922Dt
1924Dt
1926Dt
1928Dt
1905D/L1
1906D/L1
1910D/L1
1912D/L1
1914D/L1
1916D/L1
1918D/L1
1905D/L2
1906D/L2
1910D/L2
1912D/L2
1914D/L2
1916D/L2
1918D/L2
1905D/L3
1906D/L3
1910D/L3
1912D/L3
1914D/L3
1916D/L3
1918D/L3
Valve Type Number

1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
Outlet
R.F.
ASME Flanged Ratings
Inlet
Inlet x Outlet R.F. or R.J.
Valve Size
275
275
720
1440
2160
3600
4000
-450
-151
275
275
720
1440
2160
3600
4000
-150
-76
275
275
720
1440
2160
3600
6000
-75
-21
285
285
740
1480
2220
3705
6000
-20
+100
185
285
615
1235
1845
3080
5135
185
285
615
1235
1845
3080
5135
+450
80
285
410
825
1235
2060
3430
510
1015
1525
2540
4230
+800
Inlet Pressure (psig) & Temperature Limits - F
225
445
670
1115
1860
285
285
285
285
600
600
740
285
285
285
285
600
600
740
285
285
600
600
740
275
275
275
275
600
600
720
275
275
275
275
600
600
720
275
275
275
275
600
600
720
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
1900 (SRV-1/Q4.05)
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
+1000 Standard Bellows Range (F)
Back Press. Limits

(psig) at 100F
1900
API Selection Table for Vapors, Gases and Liquids
1900 & 1900-30 Series, D Orifice - API area: 0.110 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905D/L3
1906D/L3
1905D/L2
1906D/L2
1905D/L1
1906D/L1
1905Dc
1905Dt
1906Dt
1920Dt
400
1906Dc
1910D/L3
1910D/L2
1910D/L1
1910Dc
1910Dt
600
800
1912Dt
1914Dt
1914D/L3
1914D/L2
1914D/L1
1914Dc
1916Dt
1926Dt
1916D/L3
1916D/L2
1916D/L1
1916Dc
1918Dt
1918D/L3
1918D/L2
1918D/L1
1918Dc
1928Dt
1000 1200 1400 1600 1800 2000 3000 4000 5000 6000
1912D/L3
1912D/L2
1912D/L1
1912Dc
1924Dt
SET PRESSURE - lbs./Sq. in.
1922Dt
D
1900
API Selection Chart for Vapors, Gases and Liquids
1900 & 1900-30 Series, D Orifice - API area: 0.110 Sq. in.
1900 (SRV-1/Q4.05)
1900.58
1900.59
Bellows
1905-30Ec
1906-30Ec
1910-30Ec
1912-30Ec
1914-30Ec
1916-30Ec
1918-30Ec
1905-30Et
1906-30Et
1910-30Et
1912-30Et
1914-30Et
1916-30Et
1918-30Et
1920-30Et
1922-30Et
1924-30Et
1926-30Et
1928-30Et
1905-30E/L1
1906-30E/L1
1910-30E/L1
1912-30E/L1
1914-30E/L1
1916-30E/L1
1918-30E/L1
1905-30E/L2
1906-30E/L2
1910-30E/L2
1912-30E/L2
1914-30E/L2
1916-30E/L2
1918-30E/L2
1905-30E/L3
1906-30E/L3
1910-30E/L3
1912-30E/L3
1914-30E/L3
1916-30E/L3
1918-30E/L3
Standard
1905Ec
1906Ec
1910Ec
1912Ec
1914Ec
1916Ec
1918Ec
1905Et
1906Et
1910Et
1912Et
1914Et
1916Et
1918Et
1920Et
1922Et
1924Et
1926Et
1928Et
1905E/L1
1906E/L1
1910E/L1
1912E/L1
1914E/L1
1916E/L1
1918E/L1
1905E/L2
1906E/L2
1910E/L2
1912E/L2
1914E/L2
1916E/L2
1918E/L2
1905E/L3
1906E/L3
1910E/L3
1912E/L3
1914E/L3
1916E/L3
1918E/L3
Valve Type Number

1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1x2
1x2
1x2
1x2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
Outlet
R.F.
Inlet
Valve Size
275
275
720
1440
2160
3600
4000
-450
-151
275
275
720
1440
2160
3600
4000
-150
-76
275
275
720
1440
2160
3600
6000
-75
-21
285
285
740
1480
2220
3705
6000
-20
+100
185
285
615
1235
1845
3080
5135
185
285
615
1235
1845
3080
5135
+450
80
285
410
825
1235
2060
3430
510
1015
1525
2540
4230
+800
225
445
670
1115
1860
285
285
285
285
600
600
740
285
285
285
285
600
600
740
285
285
600
600
740
275
275
275
275
600
600
720
275
275
275
275
600
600
720
275
275
275
275
600
600
720
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
1900 (SRV-1/Q4.05)
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, E Orifice - API Area: 0.196 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905E/L3
1906E/L3
1905E/L2
1906E/L2
1905E/L1
1906E/L1
1905Ec
1905Et
1906Et
1920Et
400
1906Ec
1910E/L3
1910E/L2
1910E/L1
1910Ec
1910Et
600
800
1912Et
1914Et
1914E/L3
1914E/L2
1914E/L1
1914Ec
1916Et
1926Et
1916E/L3
1916E/L2
1916E/L1
1916Ec
1918Et
1918E/L3
1918E/L2
1918E/L1
1918Ec
1928Et
1000 1200 1400 1600 1800 2000 3000 4000 5000 6000
1912E/L3
1912E/L2
1912E/L1
1912Ec
1924Et
1922Et
E
1900
1900 and 1900-30 Series, E Orifice - API Area: 0.196 Sq. in.
1900 (SRV-1/Q4.05)
1900.60
1900.61
Bellows
1905-30Fc
1906-30Fc
1910-30Fc
1912-30Fc
1914-30Fc
1916-30Fc
1918-30Fc
1905-30Ft
1906-30Ft
1910-30Ft
1912-30Ft
1914-30Ft
1916-30Ft
1918-30Ft
1920-30Ft
1922-30Ft
1924-30Ft
1926-30Ft
1928-3Ft
1905-30F/L1
1906-30F/L1
1910-30F/L1
1912-30F/L1
1914-30F/L1
1916-30F/L1
1918-30F/L1
1905-30F/L2
1906-30F/L2
1910-30F/L2
1912-30F/L2
1914-30F/L2
1916-30F/L2
1918-30F/L2
1905-30F/L3
1906-30F/L3
1910-30F/L3
1912-30F/L3
1914-30F/L3
1916-30F/L3
1918-30F/L3
Standard
1905Ec
1906Fc
1910Fc
1912Fc
1914Fc
1916Fc
1918Fc
1905Ft
1906Ft
1910Ft
1912Ft
1914Ft
1916Ft
1918Ft
1920Ft
1922Ft
1924Ft
1926Ft
1928Ft
1905F/L1
1906F/L1
1910F/L1
1912F/L1
1914F/L1
1916F/L1
1918F/L1
1905F/L2
1906F/L2
1910F/L2
1912F/L2
1914F/L2
1916F/L2
1918F/L2
1905F/L3
1906F/L3
1910F/L3
1912F/L3
1914F/L3
1916F/L3
1918F/L3
Valve Type Number

1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 2
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
Outlet
R.F.
Inlet
Valve Size
275
275
720
1440
2160
2200
3400
-450
-151
275
275
720
1440
2160
2200
3400
-150
-76
275
275
720
1440
2160
3600
5000
-75
-21
285
285
740
1480
2220
3705
5000
-20
+100
185
285
615
1235
1845
3080
5000
185
285
615
1235
1845
3080
5135
+450
80
285
410
825
1235
2060
3430
510
1015
1525
2540
4230
+800
225
445
670
1115
1860
285
285
285
285
740
740
740
285
285
285
285
740
740
740
285
285
740
740
740
275
275
275
275
720
720
720
275
275
275
275
720
720
720
275
275
275
275
720
720
720
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
230
230
230
230
500
500
500
1900 (SRV-1/Q4.05)
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, F Orifice - API Area: 0.307 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905F/L3
1906F/L3
1905F/L2
1906F/L2
1905F/L1
1906F/L1
1905Fc
1905Ft
1906Ft
1920Ft
400
1906Fc
1910F/L3
1910F/L2
1910F/L1
1910Fc
1910Ft
600
800
1912Ft
1914Ft
1914F/L3
1914F/L2
1914F/L1
1914Fc
1916Ft
1926Ft
1916F/L1
1916Fc
1918F/L3
1916F/L3
1916F/L2
1918F/L2
1918Fc
1918Ft
1928Ft
1918F/L1
1000 1200 1400 1600 1800 2000 3000 4000 5000 6000
1912F/L3
1912F/L2
1912F/L1
1912Fc
1924Ft
1922Ft
F
1900
1900 and 1900-30 Series, F Orifice - API Area: 0.307 Sq. in.
1900 (SRV-1/Q4.05)
1900.62
1900.63
Bellows
1905-30Gc
1906-30Gc
1910-30Gc
1912-30Gc
1914-30Gc
1916-30Gc
1918-30Gc
1905-30Gt
1906-30Gt
1910-30Gt
1912-30Gt
1914-30Gt
1916-30Gt
1918-30Gt
1920-30Gt
1922-30Gt
1924-30Gt
1926-30Gt
1928-30Gt
1905-30G/L1
1906-30G/L1
1910-30G/L1
1912-30G/L1
1914-30G/L1
1916-30G/L1
1918-30G/L1
1905-30G/L2
1906-30G/L2
1910-30G/L2
1912-30G/L2
1914-30G/L2
1916-30G/L2
1918-30G/L2
1905-30G/L3
1906-30G/L3
1910-30G/L3
1912-30G/L3
1914-30G/L3
1916-30G/L3
1918-30G/L3
Standard
1905Gc
1906Gc
1910Gc
1912Gc
1914Gc
1916Gc
1918Gc
1905Gt
1906Gt
1910Gt
1912Gt
1914Gt
1916Gt
1918Gt
1920Gt
1922Gt
1924Gt
1926Gt
1928Gt
1905G/L1
1906G/L1
1910G/L1
1912G/L1
1914G/L1
1916G/L1
1918G/L1
1905G/L2
1906G/L2
1910G/L2
1912G/L2
1914G/L2
1916G/L2
1918G/L2
1905G/L3
1906G/L3
1910G/L3
1912G/L3
1914G/L3
1916G/L3
1918G/L3
Valve Type Number

1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
300
300
600
900
1500
2500
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
150
150
150
150
300
300
300
Outlet
R.F.
Inlet
Valve Size
275
275
720
1440
1600
2450
2600
-450
-151
275
275
720
1440
1600
2450
2600
-150
-76
275
275
720
1440
2160
3600
3600
-75
-21
285
285
740
1480
2220
3705
3705
-20
+100
185
285
615
1235
1845
3080
3705
185
285
615
1235
1845
3080
3705
+450
80
285
410
825
1235
2060
3430
510
1015
1525
2540
3705
+800
225
445
670
1115
1860
285
285
285
285
740
740
740
285
285
285
285
740
740
740
285
285
740
740
740
275
275
275
275
720
720
720
275
275
275
275
720
720
720
275
275
275
275
720
720
720
230
230
230
230
470
470
470
230
230
230
230
470
470
470
230
230
470
470
470
230
230
230
230
470
470
470
230
230
230
230
470
470
470
230
230
230
230
470
470
470
1900 (SRV-1/Q4.05)
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, G Orifice - API Area: 0.503 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905G/L3
1906G/L3
1905G/L2
1906G/L2
1905G/L1
1906G/L1
1905Gc
1905Gt
1906Gt
1920Gt
400
1906Gc
1910G/L3
1910G/L2
1910G/L1
1910Gc
1910Gt
600
1922Gt
1914G/L3
1916G/L3
1914G/L2
1916G/L2
1914G/L1
1914Gc
1916Gt
1916Gc
1918G/L3
1918G/L2
1916G/L1
1918G/L1
1918Gc
1918Gt
1928Gt
1000 1200 1400 1600 1800 2000 3000 4000 5000 6000
1912G/L3
1912G/L2
1912G/L1
1912Gc
1914Gt
1926Gt
800
1912Gt
1924Gt
G
1900
1900 and 1900-30 Series, G Orifice - API Area: 0.503 Sq. in.
1900 (SRV-1/Q4.05)
1900.64
1900.65
1900 (SRV-1/Q4.05)
Bellows
1905-30Hc
1906-30Hc
1910-30Hc
1912-30Hc
1914-30Hc
1916-30Hc
1905-30Ht
1906-30Ht
1910-30Ht
1912-30Ht
1914-30Ht
1916-30Ht
1920-30Ht
1922-30Ht
1924-30Ht
1926-30Ht
1905-30H/L1
1906-30H/L1
1910-30H/L1
1912-30H/L1
1914-30H/L1
1916-30H/L1
1905-30H/L2
1906-30H/L2
1910-30H/L2
1912-30H/L2
1914-30H/L2
1916-30H/L2
1905-30H/L3
1906-30H/L3
1910-30H/L3
1912-30H/L3
1914-30H/L3
1916-30H/L3
Standard
1905Hc
1906Hc
1910Hc
1912Hc
1914Hc
1916Hc
1905Ht
1906Ht
1910Ht
1912Ht
1914Ht
1916Ht
1920Ht
1922Ht
1924Ht
1926Ht
1905H/L1
1906H/L1
1910H/L1
1912H/L1
1914H/L1
1916H/L1
1905H/L2
1906H/L2
1910H/L2
1912H/L2
1914H/L2
1916H/L2
1905H/L3
1906H/L3
1910H/L3
1912H/L3
1914H/L3
1916H/L3
Valve Type Number

1-1/2 x 3
1-1/2 x 3
2x3
2x3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
2x3
2x3
2x3
2x3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
2x3
2x3
1-1/2 x 3
1-1/2 x 3
2x3
2x3
2x3
2x3
150
300
300
600
900
1500
150
300
300
600
900
1500
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
Outlet
R.F.
Inlet
Valve Size
275
275
720
1440
1485
1600
275
275
720
1440
2160
2750
275
275
720
1440
1485
1600
-75
-21
-150
-76
-450
-151
285
285
740
1480
2220
2750
-20
+100
185
285
615
1235
1845
2750
185
285
615
1235
1845
2750
+450
80
285
410
825
1235
2060
510
1015
1225
2040
+800
225
445
670
1115
285
285
285
285
285
740
285
285
285
285
285
740
285
285
285
740
275
275
275
275
275
720
275
275
275
275
275
720
275
275
275
275
275
720
230
230
230
230
230
415
230
230
230
230
230
415
230
230
230
415
230
230
230
230
230
415
230
230
230
230
230
415
230
230
230
230
230
415
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, H Orifice - API Area: 0.785 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905H/L3
1906H/L3
1905H/L2
1906H/L2
1905H/L1
1906H/L1
1905Hc
1905Ht
1906Ht
1920Ht
400
1906Hc
1910H/L3
1910H/L2
1910H/L1
1910Hc
1910Ht
600
1922Ht

1914H/L2
1916H/L3
1914H/L3
1916H/L2
1914H/L1
1914Hc
1916Ht
1916Hc
1916H/L1
1000 1200 1400 1600 1800 2000 2400 2800
1912H/L3
1912H/L2
1912H/L1
1912Hc
1914Ht
1926Ht
800
1912Ht
1924Ht
H
1900
1900 and 1900-30 Series, H Orifice - API Area: 0.785 Sq. in.
1900 (SRV-1/Q4.05)
1900.66
1900.67
Bellows
1905-30Jc
1906-30Jc
1910-30Jc
1912-30Jc
1914-30Jc
1916-30Jc
1905-30Jt
1906-30Jt
1910-30Jt
1912-30Jt
1914-30Jt
1916-30Jt
1920-30Jt
1922-30Jt
1924-30Jt
1926-30Jt
1905-30J/L1
1906-30J/L1
1910-30J/L1
1912-30J/L1
1914-30J/L1
1916-30J/L1
1905-30J/L2
1906-30J/L2
1910-30J/L2
1912-30J/L2
1914-30J/L2
1916-30J/L2
1905-30J/L3
1906-30J/L3
1910-30J/L3
1912-30J/L3
1914-30J/L3
1916-30J/L3
Standard
1905Jc
1906Jc
1910Jc
1912Jc
1914Jc
1916Jc
1905Jt
1906Jt
1910Jt
1912Jt
1914Jt
1916Jt
1920Jt
1922Jt
1924Jt
1926Jt
1905J/L1
1906J/L1
1910J/L1
1912J/L1
1914J/L1
1916J/L1
1905J/L2
1906J/L2
1910J/L2
1912J/L2
1914J/L2
1916J/L2
1905J/L3
1906J/L3
1910J/L3
1912J/L3
1914J/L3
1916J/L3
Valve Type Number
1900 (SRV-1/Q4.05)
2x3
2x3
3x4
3x4
3x4
3x4
2x3
2x3
3x4
3x4
3x4
3x4
3x4
3x4
3x4
3x4
2x3
2x3
3x4
3x4
3x4
3x4
2x3
2x3
3x4
3x4
3x4
3x4
2x3
2x3
3x4
3x4
3x4
3x4
150
300
300
600
900
1500
150
300
300
600
900
1500
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
Outlet
R.F.
Inlet
Valve Size
275
275
500
625
800
800
-450
-151
275
275
500
625
800
800
-150
-76
275
275
720
1440
2160
2700
-75
-21
285
285
740
1480
2220
2700
-20
+100
185
285
615
1235
1845
2700
185
285
615
1235
1845
2700
+450
80
285
410
825
1235
2060
510
815
1225
2040
+800
225
445
670
1115
285
285
285
285
285
600
285
285
285
285
285
600
285
285
285
600
275
275
275
275
275
600
275
275
275
275
275
600
275
275
275
275
275
600
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, J Orifice - API Area: 1.287 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905J/L3
1906J/L3
1905J/L2
1906J/L2
1905J/L1
1906J/L1
1905Jc
1905Jt
1906Jt
1920Jt
1910J/L1
1910Jc
400
1910J/L3
1910J/L2
1906Jc
1910Jt
600

1912J/L3
1912J/L2
1914J/L2
1916J/L2
1914Jt
1914J/L1
1914Jc
1926Jt
1916Jt
1916Jc
1916J/L1
1000 1200 1400 1600 1800 2000 2400 2800
1912J/L1
1912Jc
1924Jt
800
1912Jt
1914J/L3
1916J/L3
1922Jt
J
1900
1900 and 1900-30 Series, J Orifice - API Area: 1.287 Sq. in.
1900 (SRV-1/Q4.05)
1900.68
1900.69
Bellows
1905-30Kc
1906-30Kc
1910-30Kc
1912-30Kc
1914-30Kc
1916-30Kc
1905-30Kt
1906-30Kt
1910-30Kt
1912-30Kt
1914-30Kt
1916-30Kt
1920-30Kt
1922-30Kt
1924-30Kt
1926-30Kt
1905-30K/L1
1906-30K/L1
1910-30K/L1
1912-30K/L1
1914-30K/L1
1916-30K/L1
1905-30K/L2
1906-30K/L2
1910-30K/L2
1912-30K/L2
1914-30K/L2
1916-30K/L2
1905-30K/L3
1906-30K/L3
1910-30K/L3
1912-30K/L3
1914-30K/L3
1916-30K/L3
Standard
1905Kc
1906Kc
1910Kc
1912Kc
1914Kc
1916Kc
1905Kt
1906Kt
1910Kt
1912Kt
1914Kt
1916Kt
1920Kt
1922Kt
1924Kt
1926Kt
1905K/L1
1906K/L1
1910K/L1
1912K/L1
1914K/L1
1916K/L1
1905K/L2
1906K/L2
1910K/L2
1912K/L2
1914K/L2
1916K/L2
1905K/L3
1906K/L3
1910K/L3
1912K/L3
1914K/L3
1916K/L3
Valve Type Number
1900 (SRV-1/Q4.05)
3x4
3x4
3x4
3x4
3x6
3x6
3x4
3x4
3x4
3x4
3x6
3x6
3x4
3x4
3x6
3x6
3x4
3x4
3x4
3x4
3x6
3x6
3x4
3x4
3x4
3x4
3x6
3x6
3x4
3x4
3x4
3x4
3x6
3x6
150
300
300
600
900
1500
150
300
300
600
900
1500
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
300
300
600
900
1500
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
150
150
150
150
150
300
Outlet
R.F.
Inlet
Valve Size
275
275
525
600
600
750
-450
-151
275
275
525
600
600
750
-150
-76
275
275
720
1440
2160
2220
-75
-21
285
285
740
1480
2220
2220
-20
+100
185
285
615
1235
1845
2220
185
285
615
1235
1845
2220
+450
80
285
410
825
1235
2060
510
815
1225
2040
+800
225
445
670
1115
285
285
285
285
285
600
285
285
285
285
285
600
285
285
285
600
275
275
275
275
275
600
275
275
275
275
275
600
275
275
275
275
275
600
150
150
150
200
200
200
150
150
150
200
200
200
150
200
200
200
150
150
150
200
200
200
150
150
150
200
200
200
150
150
150
200
200
200
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, K Orifice - API Area: 1.838 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905K/L3
1906K/L3
1905K/L2
1906K/L2
1905K/L1
1906K/L1
1905Kc
1905Kt
1906Kt
1920Kt
1910K/L1
1910Kc
400
1910K/L3
1910K/L2
1906Kc
1910Kt
600
800
1916K/L3
1912K/L3
1914K/L3
1914Kt
1916Kc
1916Kt
1914K/L1
1914Kc
1926Kt
1000 1200 1400 1600 1800 2000 2200
1912K/L1
1912Kc
1916K/L2
1912Kt
1924Kt
1912K/L2
1914K/L2
1922Kt
1916K/L1
K
1900
1900 and 1900-30 Series, K Orifice - API Area: 1.838 Sq. in.
1900 (SRV-1/Q4.05)
1900.70
1900.71
1900 (SRV-1/Q4.05)
Bellows
1905-30Lc
1906-30Lc
1910-30Lc
1912-30Lc
1914-30Lc
1905-30Lt
1906-30Lt
1910-30Lt
1912-30Lt
1914-30Lt
1916-30Lt
1920-30Lt
1922-30Lt
1924-30Lt
1926-30Lt
1905-30L/L1
1906-30L/L1
1910-30L/L1
1912-30L/L1
1914-30L/L1
1905-30L/L2
1906-30L/L2
1910-30L/L2
1912-30L/L2
1914-30L/L2
1905-30L/L3
1906-30L/L3
1910-30L/L3
1912-30L/L3
1914-30L/L3
Standard
1905Lc
1906Lc
1910Lc
1912Lc
1914Lc
1905Lt
1906Lt
1910Lt
1912Lt
1914Lt
1916Lt
1920Lt
1922Lt
1924Lt
1926Lt
1905L/L1
1906L/L1
1910L/L1
1912L/L1
1914L/L1
1905L/L2
1906L/L2
1910L/L2
1912L/L2
1914L/L2
1905L/L3
1906L/L3
1910L/L3
1912L/L3
1914L/L3
Valve Type Number

3x4
3x4
4x6
4x6
4x6
3x4
3x4
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
3x4
3x4
4x6
4x6
4x6
3x4
3x4
4x6
4x6
4x6
3x4
3x4
4x6
4x6
4x6
150
300
300
600
900
150
300
300
600
900
1500
300
600
900
1500
150
300
300
600
900
150
300
300
600
900
150
300
300
600
900
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
275
275
535
535
700
-450
-151
275
275
535
535
700
-150
-76
275
275
720
1000
1500
-75
-21
285
285
740
1000
1500
-20
+100
185
285
615
1000
1500
185
285
615
1000
1500
1500
+450
80
285
410
825
1235
1500
510
1000
1500
1500
+800
225
445
670
1115
285
285
285
285
285
285
285
285
285
285
285
285
285
285
285
275
275
275
275
275
275
275
275
275
275
275
275
275
275
275
100
100
170
170
170
100
100
170
170
170
170
170
170
170
170
100
100
170
170
170
100
100
170
170
170
100
100
170
170
170
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, L Orifice - API Area: 2.853 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905L/L3
1906L/L3
1905L/L2
1906L/L2
1905L/L1
1906L/L1
1905Lc
1905Lt
1906Lt
1920Lt
1910L/L1
1910Lc
400
1910L/L3
1912L/L3
1906Lc
1910Lt
600
1922Lt
1912L/L1
1912Lc
1000
1914L/L1
1914Lc
1200
1914Lt
800
1914L/L3
1910L/L2
1912L/L2
1914L/L2
1912Lt
1924Lt
1400
1916Lt
1926Lt
1600
L
1900
Selection Chart for Vapors, Gases and Liquids
1900 and 1900-30 Series, L Orifice - API Area: 2.853 Sq. in.
1900 (SRV-1/Q2.02)
1900.72
1900.73
1900 (SRV-1/Q2.02)
Bellows
1905-30Mc
1906-30Mc
1910-30Mc
1912-30Mc
1905-30Mt
1906-30Mt
1910-30Mt
1912-30Mt
1914-30Mt
1920-30Mt
1922-30Mt
1924-30Mt
1905-30M/L1
1906-30M/L1
1910-30M/L1
1912-30M/L1
1905-30M/L2
1906-30M/L2
1910-30M/L2
1912-30M/L2
1905-30M/L3
1906-30M/L3
1910-30M/L3
1912-30M/L3
Standard
1905Mc
1906Mc
1910Mc
1912Mc
1905Mt
1906Mt
1910Mt
1912Mt
1914Mt
1920Mt
1922Mt
1924Mt
1905M/L1
1906M/L1
1910M/L1
1912M/L1
1905M/L2
1906M/L2
1910M/L2
1912M/L2
1905M/L3
1906M/L3
1910M/L3
1912M/L3
Valve Type Number

4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
150
300
300
600
150
300
300
600
900
300
600
900
150
300
300
600
150
300
300
600
150
300
300
600
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
275
275
525
600
-450
-151
275
275
525
600
-150
-76
275
275
720
1000
-75
-21
285
285
740
1100
-20
+100
185
285
615
1100
185
285
615
1100
1100
+450
80
285
410
825
1100
510
1015
1100
+800
225
445
670
285
285
285
285
285
285
285
285
285
285
285
285
275
275
275
275
275
275
275
275
275
275
275
275
80
80
160
160
80
80
160
160
160
160
160
160
80
80
160
160
80
80
160
160
80
80
160
160
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
Selection Table for Vapors, Gases and Liquids
1900 and 1900-30 Series, M Orifice - API Area: 3.60 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905M/L3
1906M/L3
1905M/L2
1906M/L2
1905M/L1
1906M/L1
1905Mc
1905Mt
1906Mt
1920Mt
1910M/L1
1910Mc
400
1910M/L3
1910M/L2
1906Mc
1910Mt
600
800
1000
1200
1914Mt
1912M/L3
1924Mt
1912M/L1
1912Mc
1912Mt
1912M/L2
1922Mt
M
1900
1900 and 1900-30 Series, M Orifice - API Area: 3.60 Sq. in.
1900 (SRV-1/Q4.05)
1900.74
1900.75
1900 (SRV-1/Q4.05)
Bellows
1905-30Nc
1906-30Nc
1910-30Nc
1912-30Nc
1905-30Nt
1906-30Nt
1910-30Nt
1912-30Nt
1914-30Nt
1920-30Nt
1922-30Nt
1924-30Nt
1905-30N/L1
1906-30N/L1
1910-30N/L1
1912-30N/L1
1905-30N/L2
1906-30N/L2
1910-30N/L2
1912-30N/L2
1905-30N/L3
1906-30N/L3
1910-30N/L3
1912-30N/L3
Standard
1905Nc
1906Nc
1910Nc
1912Nc
1905Nt
1906Nt
1910Nt
1912Nt
1914Nt
1920Nt
1922Nt
1924Nt
1905N/L1
1906N/L1
1910N/L1
1912N/L1
1905N/L2
1906N/L2
1910N/L2
1912N/L2
1905N/L3
1906N/L3
1910N/L3
1912N/L3
Valve Type Number

4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
150
300
300
600
150
300
300
600
900
300
600
900
150
300
300
600
150
300
300
600
150
300
300
600
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
275
275
450
600
-450
-151
275
275
450
500
-150
-76
275
275
720
1000
-75
-21
285
285
740
1000
-20
+100
185
285
615
1100
185
285
615
1000
1000
+450
80
285
410
825
1000
510
1000
1000
+800
225
445
670
285
285
285
285
285
285
285
285
285
285
285
285
275
275
285
285
275
275
285
285
275
275
275
275
80
80
160
160
80
80
160
160
160
160
160
160
80
80
160
160
80
80
160
160
80
80
160
160
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, N Orifice - API Area: 4.34 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
200
1905N/L3
1906N/L3
1905N/L2
1906N/L2
1905N/L1
1906N/L1
1905Nc
1905Nt
1906Nt
1920Nt
400
1910N/L3
1910N/L2
1906Nc
600
800
1912N/L1
1912Nc
1912Nt
1000
1914Nt
1924Nt
1912N/L3
1912N/L2
1910N/L1
1910Nc
1910Nt
1922Nt
N
1900
1900 and 1900-30 Series, N Orifice - API Area: 4.34 Sq. in.
1900 (SRV-1/Q4.05)
1900.76
1900.77
1900 (SRV-1/Q4.05)
Bellows
1905-30Pc
1906-30Pc
1910-30Pc
1912-30Pc
1905-30Pt
1906-30Pt
1910-30Pt
1912-30Pt
1914-30Pt
1920-30Pt
1922-30Pt
1924-30Pt
1905-30P/L1
1906-30P/L1
1910-30P/L1
1912-30P/L1
1905-30P/L2
1906-30P/L2
1910-30P/L2
1912-30P/L2
1905-30P/L3
1906-30P/L3
1910-30P/L3
1912-30P/L3
Standard
1905Pc
1906Pc
1910Pc
1912Pc
1905Pt
1906Pt
1910Pt
1912Pt
1914Pt
1920Pt
1922Pt
1924Pt
1905P/L1
1906P/L1
1910P/L1
1912P/L1
1905P/L2
1906P/L2
1910P/L2
1912P/L2
1905P/L3
1906P/L3
1910P/L3
1912P/L3
Valve Type Number

4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
4x6
150
300
300
600
150
300
300
600
900
300
600
900
150
300
300
600
150
300
300
600
150
300
300
600
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
175
175
300
480
-450
-151
175
175
300
480
-150
-76
275
275
525
1000
-75
-21
285
285
525
1000
-20
+100
185
285
525
1100
185
285
525
1000
1000
+450
80
285
410
825
1000
510
1000
1000
+800
225
445
670
285
285
285
285
285
285
285
285
285
285
285
285
275
275
275
275
175
175
275
275
175
175
275
275
80
80
150
150
80
80
150
150
150
150
150
150
80
80
150
150
80
80
150
150
80
80
150
150
-151
to
-450
-76
to
-150
-21
to
-75
801
to
1000
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, P Orifice - API Area: 6.38 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
1905P/L3
1906P/L3
1905P/L2
1906P/L2
200
1905P/L1
1906P/L1
1905Pc
1905Pt
1906Pt
1920Pt
400
1912P/L3
1912P/L2
1910P/L1
1910Pc
1906Pc
1910Pt
600
1910P/L3
1910P/L2
1923Pt
1000
800
1912P/L1
1912Pc
1912Pt
1914Pt
1924Pt
P
1900
1900 and 1900-30 Series, P Orifice - API Area: 6.38 Sq. in.
1900 (SRV-1/Q4.05)
1900.78
1900.79
1900 (SRV-1/Q4.05)
Bellows
1905-30Qc
1906-30Qc
1910-30Qc
1912-30Qc
1905-30Qt
1906-30Qt
1910-30Qt
1912-30Qt
1920-30Qt
1922-30Qt
1905-30Q/L1
1906-30Q/L1
1910-30Q/L1
1912-30Q/L1
1905-30Q/L2
1906-30Q/L2
1910-30Q/L2
1912-30Q/L2
1905-30Q/L3
1906-30Q/L3
1910-30Q/L3
1912-30Q/L3
Standard
1905Qc
1906Qc
1910Qc
1912Qc
1905Qt
1906Qt
1910Qt
1912Qt
1920Qt
1922Qt
1905Q/L1
1906Q/L1
1910Q/L1
1912Q/L1
1905Q/L2
1906Q/L2
1910Q/L2
1912Q/L2
1905Q/L3
1906Q/L3
1910Q/L3
1912Q/L3
Valve Type Number

6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
6x8
150
300
300
600
150
300
300
600
300
600
150
300
300
600
150
300
300
600
150
300
300
600
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
165
165
250
300
-450
-151
165
165
250
300
-150
-76
165
165
300
600
-75
-21
165
165
300
600
-20
+100
165
165
300
600
165
165
300
600
+450
80
165
300
600
165
600
+800
165
445
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
70
70
115
115
70
70
115
115
115
115
70
70
115
115
70
70
115
115
70
70
115
115
-151
to
-450
-76
to
-150
-21
to
-75
1000
to
801
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, Q Orifice - API Area: 11.05 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
1906Qt
100
1905Q/L3
1906Q/L3
1905Q/L2
1906Q/L2
1905Q/L1
1906Q/L1
1905Qc
1906Qc
1905Qt
1906Qt
1920Qt
200
1910Q/L3
1910Q/L2
1910Q/L1
1910Qc
1910Qt
300
400
1912Q/L1
1912Qc
1912Qt
500
600
1912Q/L3
1912Q/L2
1922Qt
Q
1900
1900 and 1900-30 Series, Q Orifice - API Area: 11.05 Sq. in.
1900 (SRV-1/Q4.05)
1900.80
1900.81
1900 (SRV-1/Q4.05)
Bellows
1905-30Rc
1906-30Rc
1910-30Rc
1912-30Rc
1905-30Rt
1906-30Rt
1910-30Rt
1912-30Rt
1920-30Rt
1922-30Rt
1905-30R/L1
1906-30R/L1
1910-30R/L1
1912-30R/L1
1905-30R/L2
1906-30R/L2
1910-30R/L2
1912-30R/L2
1905-30R/L3
1906-30R/L3
1910-30R/L3
1912-30R/L3
Standard
1905Rc
1906Rc
1910Rc
1912Rc
1905Rt
1906Rt
1910Rt
1912Rt
1920Rt
1922Rt
1905R/L1
1906R/L1
1910R/L1
1912R/L1
1905R/L2
1906R/L2
1910R/L2
1912R/L2
1905R/L3
1906R/L3
1910R/L3
1912R/L3
Valve Type Number

6x8
6x8
6 x 10
6 x 10
6x8
6x8
6 x 10
6 x 10
6x8
6 x 10
6x8
6x8
6 x 10
6 x 10
6x8
6x8
6 x 10
6 x 10
6x8
6x8
6 x 10
6 x 10
150
300
300
600
150
300
300
600
300
600
150
300
300
600
150
300
300
600
150
300
300
600
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
55
55
150
200
-450
-151
55
55
150
200
-150
-76
100
100
230
300
-75
-21
100
100
230
300
-20
+100
100
100
230
300
100
100
230
300
+450
80
100
230
300
100
300
+800
100
300
60
60
100
100
60
60
100
100
60
100
60
60
100
100
55
55
100
100
55
55
100
100
60
60
100
100
60
60
100
100
60
100
60
60
100
100
55
55
100
100
55
55
100
100
-151
to
-450
-76
to
-150
-21
to
-75
1000
to
801
451
to
800
-20
to
450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, R Orifice - API Area: 16.0 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
1905R/L3
1906R/L3
1905R/L2
1906R/L2
50
1905R/L1
1906R/L1
1905Rc
1906Rc
1905Rt
1906Rt
1920Rt
100
1910R/L3
1910R/L2
1906Rt
150
200
250
1912R/L1
1912Rc
1912Rt
300
1912R/L3
1912R/L2
1910R/L1
1910Rc
1910Rt
1922Rt
R
1900
1900 and 1900-30 Series, R Orifice - API Area: 16.0 Sq. in.
1900 (SRV-1/Q4.05)
1900.82
1900.83
1900 (SRV-1/Q4.05)
Bellows
1905-30Tc
1906-30Tc
1910-30Tc
1905-30Tt
1906-30Tt
1910-30Tt
1920-30Tt
1905-30T/L1
1906-30T/L1
1910-30T/L1
1905-30T/L2
1906-30T/L2
1910-30T/L2
1905-30T/L3
1906-30T/L3
1910-30T/L3
Standard
1905Tc
1906Tc
1910Tc
1905Tt
1906Tt
1910Tt
1920Tt
1905T/L1
1906T/L1
1910T/L1
1905T/L2
1906T/L2
1910T/L2
1905T/L3
1906T/L3
1910T/L3
Valve Type Number

8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
8 x 10
150
300
300
150
300
300
300
150
300
300
150
300
300
150
300
300
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Outlet
R.F.
Inlet
Valve Size
50
50
65
-450
-151
50
50
65
-150
-76
65
65
120
-75
-21
65
65
300
-20
+100
65
65
300
65
65
300
+450
65
65
300
300
+800
225
30
30
100
30
30
100
100
30
30
100
30
30
60
30
30
60
30
30
100
30
30
100
100
30
30
100
30
30
60
30
30
60
-20
to
450
451
to
800
801 to 1000
-21
to
-75
-76
to
-150
-151
to
-450
Inlet
Temp.
Back Press. Limits

(psig) at 100F
1900
1900 and 1900-30 Series, T Orifice - Area: 26.00 Sq. in.
INLET TEMPERATURE F
Stainless
Spring
Alloy
Steel
Springs
Tungsten
or Inconel
Steel Springs
-450
-400
-300
-200
-100
100
200
300
400
500
600
700
800
900
1,000
1905T/L3
1906T/L3
1905T/L2
1906T/L2
50
1905T/L1
1906T/L1
1905Tc
1906Tc
1905Tt
1906Tt
100
1910T/L3
1910T/L2
1910T/L1
150
1920Tt
200
250
300
1910Tc
1910Tt
T
1900
1900 and 1900-30 Series, T Orifice - Area: 30.21 Sq. in.
1900 (SRV-1/Q4.05)
1900.84
1900
V&W
ASME Selection Table for Vapors, Gases and Liquids

1900 and 1900-30 Series, V Orifice - Area: 50.26 Sq. in.
Valve Type Number
Standard
Bellows
1905V
1906V
1910V
1920V
1905-30V
1906-30V
1910-30V
1920-30V
Valve Size
Inlet
10 x 14
10 x 14
10 x 14
10 x 14
150
300
300
300
Outlet
R.F.
-20
+100
+101
+450
+451
+800
+801
+1000
150
150
150
150
154
154
300
154
154
300
80
154
300
154
Back Press. Limits

(psig) at 100F
Standard Bellows
30
30
100
30
72
72
72
72
ASME Selection Table for Vapors, Gases and Liquids

1900 and 1900-30 Series, W Orifice - Area: 78.996 Sq. in.
Valve Type Number
1900.85
Standard
Bellows
1905W
1906W
1910W
1920W
1905-30W
1906-30W
1910-30W
1920-30W
1900 (SRV-1/Q4.05)
Valve Size
Inlet
12 x 16
12 x 16
12 x 16
12 x 16
150
300
300
300
Outlet
R.F.
-20
+100
+101
+450
+451
+800
+801
+1000
150
150
150
150
154
154
300
154
154
300
80
154
300
154
Back Press. Limits

(psig) at 100F
Standard Bellows
30
30
100
30
72
72
72
72
ds
ds
1900
Capacities (USCS)
Air
1900 Flanged Valve Orifice Capacities for Air (USCS Units)

ASME B & PVC, Section VIII
Capacities Based on Set Pressure plus 10%

overpressure or 3 psig, whichever is greater.
Capacities in standard feet of air per minute @ 60F.
Orifice Designation
Set Press.
(psig)
15
20
30
40
50
60
70
80
90
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
600
700
800
900
1000
1100
1200
1300
1400
1500
2000
2500
3000
4000
5000
6000
65
75
95
117
139
161
184
206
228
250
294
338
382
426
471
515
559
603
647
691
736
780
824
868
912
956
1000
1045
1089
1133
1354
1575
1795
2016
2237
2458
2678
2899
3120
3341
4445
5549
6653
8861
11068
13276
117
134
170
209
249
288
327
367
406
445
524
603
682
760
839
918
996
1075
1154
1232
1311
1390
1468
1547
1626
1704
1783
1862
1940
2019
2413
2806
3199
3593
3986
4380
4773
5166
5560
5953
7920
9887
11855
15789
19723
23657
183
211
267
328
390
451
513
575
636
698
821
944
1067
1190
1314
1437
1560
1683
1806
1930
2053
2176
2299
2422
2546
2669
2792
2915
3038
3161
3777
4393
5009
5625
6241
6875
7473
8089
8705
9321
12400
15480
18560
24719
30878
300
346
437
538
639
740
841
942
1043
1144
1346
1548
1750
1952
2154
2356
2558
2760
2962
3164
3365
3567
3769
3971
4173
4375
4577
4779
4981
5183
6193
7202
8212
9222
10231
11241
12251
13260
14270
15280
20328
25377
30425
468
539
683
840
998
1155
1313
1471
1628
1786
2101
2416
2731
3046
3361
3676
3991
4307
4622
4937
5252
5567
5882
6197
6512
6827
7143
7458
7773
8088
9663
11239
12815
14390
15966
17541
19117
20692
22268
23843
31721
39599
47477
0.1279 0.2279 0.3568 0.5849 0.9127
1.496
2.138
3.317
4.186
5.047
7.417
12.85
18.6
30.21
50.26
78.996
767
885
1119
1378
1636
1894
2152
2411
2669
2927
3444
3960
4477
4993
5510
6023
6543
7059
7576
8092
8609
9125
9642
10158
10675
11191
11708
12224
12741
13257
15840
18422
21005
23587
26170
28752
31334
33917
36499
39082
51994
64907
77819
1097
1264
1600
1969
2338
2707
3076
3445
3814
4183
4922
5660
6398
7136
7874
8612
9351
10089
10827
11565
12303
13041
13779
14518
15256
15994
16732
17470
18208
18946
22637
26328
30019
33709
37400
41091
44782
48472
52163
55854
74308
1702
1962
2483
3055
3628
4200
4773
5346
5918
6491
7636
8781
9926
11072
12217
13362
14507
15652
16798
17943
19088
20233
21378
22524
23669
24814
25959
27104
28250
29395
35121
40487
46573
52299
58025
63751
69477
75203
80929
86655
2148
2476
3133
3856
4578
5301
6023
6746
7469
8191
9637
11082
12527
13972
15417
16863
18308
19753
21198
22644
24089
25534
26979
28424
29870
31315
32760
34205
35651
37096
44322
51548
58774
66000
73227
80453
2589
2985
3778
4649
5520
6391
7263
8134
9005
9876
11619
13361
15104
16846
18589
20331
22074
23816
25559
27301
29044
30786
32529
34271
36014
37756
39499
41241
42984
44726
53439
62151
70863
79576
88288
3806
4388
5552
6832
8112
9393
10673
11953
13234
14514
17075
19636
22196
24757
27318
29879
32439
35000
37561
40122
42682
45243
47804
50365
52925
55486
58047
60608
63168
65729
78533
91336
104140
116944
129747
6594
7602
9619
11837
14055
16273
18492
20710
22928
25146
29583
34019
38456
42892
47329
51765
56202
60638
65075
69511
73948
78384
82821
87257
91694
96130
100567
105003
109440
113876
136059
9544
11004
13923
17134
20345
23555
26766
29977
33188
36399
42821
49242
55664
62086
68507
74929
81351
87772
94194
100616
15502
17873
22614
27829
33044
38259
43474
48689
53904
59119
69549
79979
90409
100839
111270
121700
132130
142560
152990
163420
25792
29735
37623
46229
54975
63651
72327
81004
89680
98356
115708
133061
150413
167766
185118
202470
219823
237175
254528
271880
40538
46737
59134
72770
86407
100044
113681
127318
140954
154591
181865
209138
236412
263685
290959
318233
345506
372780
400053
427327
NOTE: 1 Relieving capacities indicated are 90% of average capacity in accordance with the latest ASME Code requirements.
For temperatures other than 60 F and specific gravities other than air use formula sizing method.
SIZING: Refer to the sizing section for formulas for both ASME and API sizing. Valves may be sized for either ASME or API
applications.
1900.86
1900 (SRV-1/Q4.05)
1900
Capacities (USCS)
Steam
1900 and 1900TD Flanged Valve Orifice Capacities

for Steam (USCS Units)
Capacities Based on Set Pressure plus 10%

overpressure or 3 psig, whichever is greater.
Capacities in lbs. per hour of saturated steam
Orifice Designation
Set Press.
(psig)
15
20
30
40
50
60
70
80
90
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
600
700
800
900
1000
1100
1200
1300
1400
1423
1500
2000
2500
2903
184
212
268
330
392
454
516
578
640
702
826
950
1073
1197
1321
1445
1569
1693
1817
1941
2065
2189
2312
2436
2560
2684
2808
2932
3056
3180
3799
4419
5038
5658
6277
6897
7516
8136
8755
8898
9420
13024
17235
21551
328
378
478
589
699
809
920
1030
1140
1251
1472
1692
1913
2134
2355
2575
2796
3017
3238
3459
3679
3900
4121
4342
4562
4783
5004
5225
5446
5666
6770
7874
8978
10082
11186
12289
13393
14497
15601
15855
16785
23207
30711
38401
513
592
749
922
1095
1267
1440
1613
1786
1959
2304
2650
2996
3341
3687
4032
4378
4724
5069
5415
5761
6106
6452
6798
7143
7489
7834
8180
8526
8871
10600
12328
14056
15784
17512
19241
20969
22697
24425
24822
26279
36334
48082
60121
842
970
1228
1511
1795
2078
2361
2645
2928
3211
3778
4344
4911
5478
6044
6611
7177
7744
8311
8877
9444
10010
10577
11144
11710
12277
12843
13410
13977
14543
17376
20209
23042
25875
28708
31541
34374
37207
40040
40691
43079
59562
78821
98557
0.1279 0.2279 0.3568 0.5849 0.9127
1.496
2.138
3.317
4.186
5.047
1314 2154 3078 4776 6027 7266

1515 2483 3549 5506 6948 8378
1916 3142 4490 6966 8792 10600
2359 3866 5526 8573 10819 13045
2801 4591 6561 10180 12487 15489
3243 5315 7597 11786 14874 17934
3685 6040 8632 13393 16902 20378
4127 6765 9668 14999 18929 22823
4569 7489 10703 16606 20957 25267
5011 8214 11739 18213 22984 27712
5895 9663 13810 21426 27039 32601
6779 11112 15881 24639 31094 37490
7663 12561 17952 27852 35149 42379
8548 14011 20023 31066 39204 47268
9432 15460 22095 34279 43259 52157
10316 16909 24166 37492 47314 57046
11200 18358 26237 40705 51370 61936
12084 19807 28308 43918 55425 66825
12968 21257 30379 47132 59480 71714
13852 22706 32450 50345 63535 76603
14737 24155 34521 53558 67590 81492
15621 25604 36592 56771 71645 86381
16505 27053 38663 59985 75700 91270
17389 28503 40735 63198 79755 96159
18273 29952 42806 66411 83810 101048
19157 31401 44877 69624 87865 105938
20041 32850 46948 72838 91920 110827
20926 34299 49019 76051 95975 115716
21810 35749 51090 79264 100030 120605
22694 37198 53161 82477 104085 125494
27115 44444 63517 98543 124360 149939
31535 51690 73872 114609 144365 174385
35956 58936 84228 130676 164911 198831
40377 66182 94583 146742 185186 223276
44798 73428 104939 162808 205461 247722
49218 80674 115295 178874 225736
53639 87920 125650 194940 246011
58060 95166 136006 211006
62481 102412 146361 227072
63496 104076 148740 230764
67222 110183 157468 244304
92943 152343 217720
122995 201601
1900 (SRV-1/Q4.04)
12.85
18.6
30.21
50.26
78.996
10679
12312
15578
19170
22763
26355
29948
33540
37133
40725
47910
55095
62280
69465
76650
83835
91020
98205
105390
112575
119760
126945
134130
141315
148500
155685
162869
170054
177239
184424
220349
256274
292199
328124
364048
18502
21331
26989
33213
39437
45661
51885
58109
64333
70557
83005
95453
107901
120349
132797
145245
157693
170141
182589
195037
207485
219933
232381
244829
257277
269725
282173
294621
307069
319517
381757
26781
30876
39066
48075
57084
66093
75102
84111
93120
102129
120147
138166
156184
174202
192220
210238
228256
246274
264292
282310
43498
50149
63451
78084
92716
107348
121981
136613
151246
165878
195143
224408
253673
282938
312203
341467
370732
399997
429262
458527
72367
83432
105563
129907
154251
178595
202938
227282
251626
275970
342657
373345
422033
470720
519408
568095
616783
665471
714158
762846
113743
131135
165919
204181
242443
280706
318968
357230
395493
433755
510280
586804
663329
739853
816378
892903
969427
1045952
1122476
1199001
NOTE 1: Relieving capacities indicated are 90% of average capacity in accordance with the latest ASME Code requirements. Maximum
permissible set pressure on steam is 2903 psig. 3000 psig capacities are included for interpolation purposes only.
NOTE 2: For Superheat Correction Factors refer to pages VS.18 and VS.19 in the Valve Sizing section of this catalog.
applications.
1900.87
7.417
1900
Capacities (USCS)
Water
1900LA Flanged Valve Orifice Capacities

for Water (USCS Units)
Capacities based on Set Pressure plus 10% overpressure or

3 psig, whichever is greater, zero psig back pressure. Capacities in gallons
of water per minute at 70F, 90% of average capacity.
Orifice Designation
Set Press.
(psig)
15
20
30
40
50
60
70
80
90
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
600
700
800
900
1000
1100
1200
1300
1400
1500
2000
2500
3000
4000
5000
6000
13
15
18
21
24
26
28
30
32
34
37
40
43
45
48
50
52
54
57
59
61
62
64
66
68
69
71
73
74
76
83
90
96
102
107
113
118
122
127
132
152
170
186
215
241
264
24
27
33
38
42
47
50
54
57
60
66
71
76
81
85
90
94
97
101
105
108
112
115
118
121
124
127
130
133
135
148
160
171
182
192
201
210
219
227
235
271
303
332
384
429
470
38
43
52
60
67
73
79
85
90
95
104
112
120
127
134
141
147
153
159
164
170
175
180
185
190
194
199
204
208
212
233
251
269
285
300
315
329
343
355
368
425
475
521
601
672
63
71
85
98
110
120
130
139
147
155
170
184
197
209
220
231
241
251
260
270
278
287
295
304
311
319
327
334
341
348
382
412
441
467
493
517
540
562
583
603
697
779
854
986
98
111
133
153
172
188
203
217
230
243
266
287
307
326
344
360
377
392
407
421
435
448
461
474
486
498
510
521
533
544
596
643
688
730
769
807
842
877
910
942
1088
1216
1332
0.1279 0.2279 0.3568 0.5849 0.9127
1.496
2.138
3.317
4.186
5.047
7.417
12.85
18.6
30.21
50.26
78.996
161
182
218
252
282
308
333
356
378
398
436
471
504
535
564
591
617
643
667
690
713
735
756
777
797
817
836
855
873
891
977
1055
1128
1196
1261
1322
1381
1438
1492
1544
1783
1994
2184
230
260
312
360
403
441
476
509
540
570
624
674
721
764
806
845
883
919
953
987
1019
1051
1081
1111
1140
1168
1195
1222
1248
1274
1396
1508
1612
1710
1802
1890
1974
2055
2132
2207
2549
357
404
484
559
625
685
739
791
839
884
968
1046
1118
1186
1250
1311
1370
1426
1479
1531
1582
1630
1678
1724
1768
1812
1855
1896
1937
1977
2166
2339
2501
2653
2796
2933
3063
3188
3309
3425
451
510
611
705
789
864
933
998
1058
1116
1222
1320
1411
1497
1578
1655
1729
1799
1867
1933
1996
2058
2117
2175
2232
2287
2341
2393
2445
2495
2733
2952
3156
3348
3529
3701
544
615
737
851
951
1042
1125
1203
1276
1345
1474
1592
1702
1805
1903
1995
2084
2169
2251
2330
2407
2481
2553
2623
2691
2757
2822
2886
2948
3009
3296
3560
3806
4037
4255
799
904
1083
1250
1398
1531
1654
1768
1876
1977
2166
2339
2501
2653
2796
2933
3063
3188
3309
3425
3537
3646
3752
3855
3955
4052
4148
4241
4332
4422
4844
5232
5593
5932
6253
1385
1566
1876
2166
2422
2653
2866
3064
3250
3426
3753
4053
4333
4596
4845
5081
5307
5524
5733
5934
6128
6317
6500
6678
6852
7021
7186
7348
7506
7661
8392
9064
9690
10278
10834
2006
2267
2716
3136
3506
3841
4149
4435
4704
4959
5432
5867
6273
6653
7013
7355
7682
7996
8298
8589
3258
3683
4411
5094
5695
6239
6739
7204
7641
8054
8823
9530
10188
10806
11391
11947
12478
12988
13478
13951
5420
6127
7339
8475
9475
10380
11211
11985
12713
13400
14679
15855
16950
17978
18951
19876
20760
21608
22423
23210
8520
9631
11536
13321
14893
16314
17622
18838
19981
21062
23072
24921
26642
28258
29786
31240
32629
33962
35244
36481
NOTE: 1 Relieving capacities indicated are 90% of average capacity in accordance with the latest ASME Code requirements.
applications.
1900.88
1900 (SRV-1/Q2.02)

Consolidated-Relief Valve Catalogue

Uploaded by

Copyright:

Available Formats

Consolidated-Relief Valve Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Consolidated-Relief Valve Catalogue

Uploaded by

Copyright:

Available Formats

1900

The Consolidated 1900 series is compliant with the following codes

API Standard 526-2002

Consolidated Spring Loaded Safety Relief Valves

1900 Series Overview

Type 1900 Series

1900-30 Series Bellows Construction

Type 1900-30 Series

1900-35 Series Balanced Bellows (with Auxiliary Balancing Piston)

Type 1900-35 Series

with Auxiliary Balancing Piston

1900 Series Overview

Consolidated Spring Loaded Safety Relief Valves

How Pressure Relief Valves Operate

orifice, pressure builds up in chamber B (See Figure 1900.2). Since

Figure 1900.1 - Closed

When the valve is closed during normal operation (See Figure

Figure 1900.2 - Partially Open

Figure 1900.3 - Fully Open

Once the valve has opened an additional pressure build-up at C

How Pressure Relief Valves Operate

Secondary Annular Orifice

Adjusting Ring Pin

Product Features - 1900 Flanged Series

The adjusting ring in the CONSOLIDATED safety relief valve is preset to

CONSOLIDATED safety relief valves embody a minimum number of

Simple Blowdown Adjustment

Minimum Guiding Area

Spindle Pocket Connection

Maximum Seat Tightness

Cap and Lever Interchangeability

Product Features - 1900 Flanged Series

Eductor Tube Reduces Bonnet Pressure

Figure 1900.5 - Eductor Tube

Consolidated Spring Loaded Safety Relief Valves

1900 Steam Trim (TD) Valves

Thermodisc this is a specifically designed disc for use on high

The Martensitic stainless steel disc construction allows for

1900 Steam Trim Internals

1900 Disc Design Availability

1900 Liquid Trim (LA) Valves

relief applications. (Thermal Relief is to prevent excessive pressure

1900 Liquid Service Internals

Single piece disc holder

Designed to provide high lift

Consolidated Spring Loaded Safety Relief Valves

1900 Restricted Lift Valves

D and E Orifice Only

Soft Seat Applications

Hot Water Boiler Service

Compressor Discharge and Positive Displacement

Foreign Matter and Slurry Service

1900-DA soft seats without bellows

Consolidated Spring Loaded Safety Relief Valves

1900 Soft Seat (DA) Option

101 to Max rating of valve

CONSOLIDATED O-Ring seat seals provide positive closure at service pressures

1900 Soft Seat (DA) Option

Three Essentials to a Tighter and More Secure Seal: