MBE4000 Brochure
MBE4000 Brochure
MBE4000 Brochure
ENGINE
mbe 4000
This is the engine for anyone seeking excellent fuel economy and
The EPA has been reducing diesel emissions for the past 30 years.
The latest regulations, which take effect in 2007, demand changes
the message from Detroit Diesel is loud and clear: Were ready!
engine Brakes
Exhaust gas recirculation systems have been optimized to dramatically cut NOx
The best engine-brake technology just got better. The MBE 4000 comes
370 braking hp. For buyers who need more, we offer an optional Premium
Engine Brake that boosts braking power to a whopping 580 hp. The 2007
MBE 4000 offers increased flexibility in making the proper engine brake
selection. Trucks can be ordered with the standard engine brake and uprated
The new SMART Fuel System adds to the performance and cleanliness of the
Both the Standard and Premium Engine brakes are known for their quiet
operation, increasing service brake life, improving driver safety and increasing
resale value.
*Uprate charges apply.
vented into the atmosphere. The system sends oil droplets back to the sump
where they can continue to serve the engine, reducing oil consumption. And the
best thing is, it requires no maintenance.
650
Detroit Diesel set the benchmark for heavy-duty diesel engine electronics. Now,
were raising the bar with the sixth generation DDEC VI electronic engine
management system. It employs a more powerful microprocessor, increased
memory and enhanced diagnostics. The DDEC VI is capable of monitoring and
managing all engine functions, including the Aftertreatment Systems required
for 2007 emissions. DDEC VI is a key part of the strategy to achieve greater
operating efficiency and cleaner exhaust emissions.
7G6@>C<EDL:G=E
EPA07
EPA07
600
EPA07
EPA07 Premium
Premium Engine
Engine Brake
Brake
550
EPA04
EPA04 Turbo
Turbo Brake
Brake
500
EPA04 Standard
Standard Brake
Brake
EPA04
450
EPA04
EPA04
EPA07
EPA07 Standard
Standard Brake
Brake
400
350
300
250
EPA07
EPA07
200
EPA04
EPA04
150
100
50
0
1,000
1,250
1,500
1,750
2,000
:C<>C:HE:::9&$GEB
ENGINE SPEEED (1/RPM)
2,250
2,500
MBE 4000
Refined Exhaust System
Exhaust AfterTreatment SYSTEM
The biggest change to our 2007 engines is the addition of an exhaust
Aftertreatment System, which replaces the muffler assembly in the exhaust
2007 ENGINE
system. The units defining components are a Diesel Oxidation Catalyst (DOC) and
a Diesel Particulate Filter (DPF) that oxidizes or burns soot. During normal
highway operation, exhaust temperatures alone are usually high enough to burn
off accumulating soot a process known as passive regeneration. In low
ambient temperatures, however, or in some stop-and-go applications, the
system needs a little help to regenerate, or clean itself. This process is called
Diesel
PARTICULATE
FILTER (DPF)
Diesel
Oxidation
Catalyst (Doc)
active regeneration.
Doser
The Aftertreatment System uses a doser to initiate active regeneration. When
the amount of soot inside reaches a certain level, the doser injects a measured
amount of diesel fuel into the exhaust flow, which will react with the catalyst to
raise the temperature to a point which enables regeneration.
AFTERTREATMENT SYSTEM
There are two types of active regeneration: in-transit and stationary. In-transit
regeneration occurs when the truck is in motion. In cases when the trucks
driving cycle is insufficient for in-transit active regeneration, stationary active
regeneration is required. This is performed when the truck is parked and
monitored by the driver or a service technician.
exhaust in
(soot, carbon
monoxide,
hydrocarbons)
cell plugs
exhaust out
Intake Throttle
The intake throttle also assists in the regeneration process. When necessary, this
device will limit the amount of air entering the engine thereby raising the exhaust
temperature and facilitating regeneration.
trapped soot
ceramic
honeycomb
with wall
support
catalyst
A new low ash oil formulation, designated CJ-4, will be required in EPA-07
more than 15 ppm sulfur. The current maximum sulfur content for on-highway
engines. CJ-4 oil contains less than 1.0 wt. % sulfated ash. Use of high ash
diesel fuel is 500 ppm. ULSD fuel is necessary to avoid fouling the engines
engine oils will reduce the cleaning interval on the Diesel Particulate Filter
Aftertreatment System.
(DPF) system.
ENGINE
Severe
Short-Haul
Long-Haul
10,000
15,000
25,000
20,000
30,000
50,000
Severe-Duty: Less than 6,000 annual miles. Short-Haul: 6,000 to 60,000 annual miles. Long-Haul: Over 60,000 annual miles.
WARRANTY PERIOD
Item
Engine
Accessories
0 - 24
Major
Components
25 - 60
Miles / Kilometers
Parts
Labor
Unlimited
No Charge
No Charge
0 - 100,000 mi
No Charge
No Charge
0 - 160,000 km
Upon expiration of the 24 month warranty coverage, but within
500,000 mi / 800,000 km of use, the warranty continues to apply as follows:
0 - 500,000 mi
100% of Service
No Charge
0 - 800,000 km
Outlets Normal Charge
Cylinder Block/Head, Crankshaft, Camshaft, Main Bearing Bolts, Flywheel Housing, Connecting Rod Assemblies, Oil Cooler Housing, Water Pump Housing
and Air Inlet Housing.