Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Moshell Commands

    Uploaded by

    atrees23
    Moshell is a command interface that allows users to access and manage network nodes. It can be used to change parameters, collect performance counters, lock/unlock cells, retrieve alarms and instantaneous cell information. RF engineers can use Moshell to analyze counters and run scripts remotely. The first step is to log into a node using the ./moshell command followed by the node name or IP address. Common Moshell commands include lt to list managed objects (MOs), get/lget to read attribute values, st/lst to view state of MOs, set/lset to modify attribute values, and others to view hardware/software inventory, link status, alarms, and node logs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Moshell Commands

    Uploaded by

    atrees23
    2K views15 pages
    Moshell is a command interface that allows users to access and manage network nodes. It can be used to change parameters, collect performance counters, lock/unlock cells, retrieve alarms and instantaneous cell information. RF engineers can use Moshell to analyze counters and run scripts remotely. The first step is to log into a node using the ./moshell command followed by the node name or IP address. Common Moshell commands include lt to list managed objects (MOs), get/lget to read attribute values, st/lst to view state of MOs, set/lset to modify attribute values, and others to view hardware/software inventory, link status, alarms, and node logs.

    Original Description:

    Moshell Commands

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Moshell is a command interface that allows users to access and manage network nodes. It can be used to change parameters, collect performance counters, lock/unlock cells, retrieve alarms and instantaneous cell information. RF engineers can use Moshell to analyze counters and run scripts remotely. The first step is to log into a node using the ./moshell command followed by the node name or IP address. Common Moshell commands include lt to list managed objects (MOs), get/lget to read attribute values, st/lst to view state of MOs, set/lset to modify attribute values, and others to view hardware/software inventory, link status, alarms, and node logs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    2K views15 pages

    Moshell Commands

    Uploaded by

    atrees23
    Moshell is a command interface that allows users to access and manage network nodes. It can be used to change parameters, collect performance counters, lock/unlock cells, retrieve alarms and instantaneous cell information. RF engineers can use Moshell to analyze counters and run scripts remotely. The first step is to log into a node using the ./moshell command followed by the node name or IP address. Common Moshell commands include lt to list managed objects (MOs), get/lget to read attribute values, st/lst to view state of MOs, set/lset to modify attribute values, and others to view hardware/software inventory, link status, alarms, and node logs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 15
    At a glance
    Powered by AI
    The document discusses how Moshell can be used by RF engineers to remotely access network nodes to change parameters, collect performance counters, lock/unlock cells, and get alarms. It also describes how to log into different types of network elements using Moshell.

    The basic MO commands in Moshell are lt/ltc to list MOs, get/lget to read attributes, st/lst to print state, and setm/lsetm to set attribute values.

    To get the MO, attribute and value in Moshell, you would use the lset command with the MO name, attribute, and desired value. For example, lset electricalantennatilt would set values on the electricalantennatilt MO.

    Moshell

    Commands
    Introduction

    Moshell is a command interface to access the Network


    Nodes. Normally we use Moshell to change parameters,
    get dumps from the Network Nodes, collect performance
    counters, lock and unlock cells, get alarms, get
    instantaneous cell information and another many actions
    that can be sent to the network elements such as, restart,
    calibrate the RET Device, Start hardware test,
    etc.

    Using Moshell, RF Engineers can save a lot of time and


    money when analyzing counters and running scripts from
    the office.

    Logging in to a Node
    The first step to start using moshell is to log in to a node:
    Usage: ./moshell nodename or node ipddress
    Examples:
    Logging in to a RNC

    Logging in to a Node B:

    BASIC MO COMMANDS lt/ltc[1-9]


    To read the list of MOs in the store in moshell memory.
    Most common is to use lt all.
    Example: lt

    BASIC MO COMMANDS lt

    Loading the MO RbsLocalCell

    BASIC MO COMMANDS get/lget


    Reads attribute(s) from MO(s).
    Usage: lget MO Atribute
    Examples: lget

    BASIC MO COMMANDS st/lst


    Prints administrative state and operational state of MO's

    Usage: st MO
    Example: st
    UER1463_JOUHAYNA_IBS> st AiDevice
    OR

    BASIC MO COMMANDS set[m]/lset[m]


    Set an attribute value on one or several MOs
    Getting the MO, the Attriute and the Value:

    Usage: lset MO attribute Value


    Setting the values on one MO (electricalantennatilt)

    OTHER MO COMMANDS inv[hr]


    Complete HW/SW inventory. Includes information about RPUs,
    licensing, JVM, devices,XPs, ISL, etc.
    Usage inv

    OTHER MO COMMANDS str


    Print status of the IubLinks/AbisLinks and their
    associated Cells and Channels
    Example

    OTHER MO COMMANDS al[atk]


    Print the list of active alarms. Acknowledge/Unacknowledge an
    alarm

    OTHER MO COMMANDS lg[aevsmircdyuolh]


    Fetching and/or processing of node logs (alarm, event,
    availability, system, etc) .
    Most common lga Alarm Log
    Getting the Alarm Log for a site
    Usage lgar startdate enddate
    UER1463_JOUHAYNA_IBS> lgar 20142011 201422111
    OTHER MO COMMANDS cab[slxradgtm]
    Display printouts relating to hw, sw, restarts, leds, cpu
    load, errors, disk/ram usage.
    Usage: cabx

    You might also like