Transducers Catalogue

Transducers
Contents
Page
Transducer Survey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General description and technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Transducers DU for AC voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Transducers DI for AC current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Transducers DUD for DC voltage and DID for DC current. . . . . . . . . 19
Transducers DF for frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Transducers for power factor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Transducers DP, DQ and DPQ for active and reactive power. . . . . . . 26
Transducers DP for active power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Transducers DQ for reactive power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Transducers DPQ for active and reactive power. . . . . . . . . . . . . . . . . . 43
Transducers DR for resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Dimensions and weights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Transducer Survey
Type
Function Output config. Auxiliary
Case Page
AC Voltage
DU 120
AC voltage
Utan hjlpspnning
C1
13
DU 121
AC voltage
A, B, C, D
92 138 V AC
C1
13
DU 122
AC voltage
A, B, C, D
184 276 V AC
C1
13
DU 124
AC voltage
A, B, C, D, E, F, G, H
18 80 V AC/DC
C3
14
DU 125
AC voltage
A, B, C, D, E, F, G, H
80 276 V AC/DC
C3
14
AC current
DI 120
AC current
Utan hjlpspnning
C1
17
DI 121
AC current
A, B, C, D
92 138 V AC
C1
17
DI 122
AC current
A, B, C, D
184 276 V AC
C1
17
DI 124
AC current
A, B, C, D, E, F, G, H
18 80 V AC/DC
C3
18
DI 125
AC current
A, B, C, D, E, F, G, H
80 276 V AC/DC
C3
18
DC Voltage
DUD 124
DC voltage
A, B, C, D, I, K, L
18 80 V AC/DC
C3
20
DUD 125
DC voltage
A, B, C, D, I, K, L
80 276 V AC/DC
C3
20
DC Curren
DID 124
DC current
A, B, C, D, I, K, L
18 80 V AC/DC
C3
20
DID 125
DC current
A, B, C, D, I, K, L
80 276 V AC/DC
C3
20
Frequency
DF 03-04 2-wire, ph/n or ph/ph
A, B

19 58 V AC/DC
88 264 V AC/DC
C3
22
Power Factor
24

Transducer Survey
Type
Case Page
Active Power
DP 124 1E, 1-phase/2-wire, (ph/n)
A, B, I, K, L
18 80 V AC/DC
C3
29
DP 125 1E, 1-phase/2-wire, (ph/n)
A, B, I, K, L
80 276 V AC/DC
C3
29
DP 134 1E, 3-wire, balanced load
A, B, I, K, L
18 80 V AC/DC
C3
30
DP 135 1E, 3-wire, balanced load
A, B, I, K, L
80 276 V AC/DC
C3
30
DP 144 1E, 4-wire, (ph/n), balanced load
A, B, I, K, L
18 80 V AC/DC
C3
31
DP 145 1E, 4-wire , (ph/n), balanced load
A, B, I, K, L
80 276 V AC/DC
C3
31
DP 234 2E, 3-wire, unbalanced load
A, B, I, K, L
18 80 V AC/DC
C3
32
A, B, I, K, L
80 276 V AC/DC
C3
32
DP 334 3E, 3- or 4-wire, unbalanced load, without connected neutral A, B, I, K, L
18 80 V AC/DC
C4
33
DP 335 3E, 3- or 4-wire, unbalanced load, without connected neutral A, B, I, K, L
80 276 V AC/DC
C4
33
A, B, I, K, L
18 80 V AC/DC
C4
34
A, B, I, K, L
80 276 V AC/DC
C4
34
Reactive Power
DQ 134 1E, 3-wire, balanced load
A, B, I, K, L
18 80 V AC/DC
C3
38
DQ 135 1E, 3-wire, balanced load
A, B, I, K, L
80 276 V AC/DC
C3
38
DQ 234 2E, 3-wire, unbalanced load
A, B, I, K, L
18 80 V AC/DC
C3
39
A, B, I, K, L
80 276 V AC/DC
C3
39
DQ 334 3E, 3- or 4-wire, unbalanced load without connected neutral A, B, I, K, L
18 80 V AC/DC
C4
40
DQ 335 3E, 3- or 4-wire, unbalanced load without connected neutral
A, B, I, K, L
80 276 V AC/DC
C4
40
A, B, I, K, L
18 80 V AC/DC
C4
41

A, B, I, K, L
80 276 V AC/DC
C4
41
Transducer Survey
Type
Case Page
Active and Reactive Power Combined
DPQ 134 1E, 3-wire, balanced load
A, B, I, K, L
18 80 V AC/DC
C4
45
DPQ 135 1E, 3-wire, balanced load
A, B, I, K, L
80 276 V AC/DC
C4
45
DPQ 144 1E, 4-wire, (ph/n), balanced load
A, B, I, K, L
18 80 V AC/DC
C4
46
DPQ 145 1E, 4-wire, (ph/n), balanced load
A, B, I, K, L
80 276 V AC/DC
C4
46
DPQ 234 2E, 3-wire, unbalanced load
A, B, I, K, L
18 80 V AC/DC
C4
47
A, B, I, K, L
80 276 V AC/DC
C4
47
DPQ 334 3E, 3- or 4-wire, unbalanced load , without connected neutral A, B, I, K, L
18 80 V AC/DC
C4
48
DPQ 335 3E, 3- or 4-wire, unbalanced load, without connected neutral
A, B, I, K, L
80 276 V AC/DC
C4
48
A, B, I, K, L
18 80 V AC/DC
C4
49
A, B, I, K, L
80 276 V AC/DC
C4
49
Transducer Survey
Type
Case Page
Resistance/Temperature
DR 134 Pot
A, B, C, D
18 80 V AC/DC
C3
51
DR 135 Pot
A, B, C, D
80 276 V AC/DC
C3
51
DR 224 2-wire
A, B, C, D
18 80 V AC/DC
C3
51
DR 225 2-wire
A, B, C, D
80 276 V AC/DC
C3
51
DR 334 3-wire
A, B, C, D
18 80 V AC/DC
C3
51
DR 335 3-wire
A, B, C, D
80 276 V AC/DC
C3
51
DR 434 Temp.
A, B, C, D, I, K, L
18 80 V AC/DC
C3
51
DR 435 Temp.
A, B, C, D, I, K, L
80 276 V AC/DC
C3
51
General description and technical data

In this catalogue, Cewe Instrument presents BLUE MODULE, a wide range of Transducers for DIN-rail and
panel mounting.
Thanks to high performance and high reliability e. g. a
MTBF of 40 years for current transducers, Cewe Instrument transducers have obtained a wide clientele. The
transducers are used by industries and power companies in
around 40 countries in Europe as well as in all parts of the
world. Cewe Instruments transducer are also produced on
licence in China.
Below follows general information on electrical measuring transducers with examples of application, definition
of terms and some common data for Cewe Instrument
transducers. For each group of transducers then follows
an explanation of working principle, block diagram, and

general data.
The output from our transducers are within certain limits
independent of load. The load limits are given in a data
sheets. The load independence is obtained by a certain
feedback of the output signal to the amplifier. These transducer charactaristics give great advan-tages among which
the most important are mentioned below.
1. Measuring values can be transmitted over relatively long
distances.
2. Within the framework of the permitted output signal
loadings, several measuring or registration units can be
connected simultane-ously to the same transducer. No
special tuning is required.
P~
Computer
dP 134
B0086 GB
Cl 48
Cl 96
3. No adjustment for wire resistance need to be made in

connected instruments.
4. The actual wiring is simple and inexpensive in that thin
wires can be used for output signals.
5. Individual instruments or other measuring or registration

units can be disconnected from a circuit after short-circuiting their connection wires. The signal and the remaining
units in the circuit remain unaffected which simplifies
service.
P~
Computer
dP 134
B0087 GB
Cl 48
Cl 96
6. Maximum open circuit output voltage is low, 20 V,

which means that the output circuit can be opened without
any precautions.
7. They have a wide range of applications because of their
high accuracy and the fact that they are approved in accordance wit interference tests IEC 255 -5 and -6, for input
and output signals.
Certain A/D-converters and controllers require a positive

input signal. For this purpose it is useful to have a zero
displacement in power measurements with both positive
and negative power. Cewe Instruments transducers can be
produced with zero displacement up to 50 % of the measuring range.
Example: Measuring range 100-0-100 kW, output signal 4 12 20 mA where 4 mA = 100 kW,
12 mA = 0 kW and 20 mA = +100 kW.
See page 11 output signal L.
P~
R
Computer
Example:
Connection to a
computer.
Cl 48
B0088GB
dP 135

Cewe Instruments power transducers are adapted for
both summation and different measurements. Other Cewe
Instrumenttransducers can be used for summation measurements.
Addition or subtraction of outputs

Summation or different measurements are made by connecting the outputs according to the figures below. This is
possible because the outputs are potential free.
P1
P~
+
-
P1
P2
P~
P2
P~
P2
Summation
P1 + P2
P1
P~
+
-
P1
P2
B0089
Difference
P1 P2
Live-Zero output
Response time
Using a measuring transducer with a nominal output of 0

20 mA, there can be an uncertainty when the output is
zero, whether the in-put quantity is zero or there is a faulty
transformer, transducer or connector. To avoid this we
produce transducers with a live zero out-put. This output
is normally 4 20 mA for an input of 0 100 %. These
live zero output transducers are frequently used in process
technology, but could also be used in power distribution
instrumentation.
The standard response time is 300 ms. A response time of

50 ms is available as an option. (Except for DF and DPF)
Other response times on request.
In this catalogue the concept response time is used to
characterize the time performance of the transducer. Time
constant is often used in other cases. The diagram below
makes clear the difference between response time and time
constant.
Transducer Indicating instrument
Output
63 %
time
constant
response
time
Ripple
The maximum ripple on the output is < 1 % of the output
signal (fs) for transducers in class 0.5. The max. ripple for
transducers in class 0.2 is < 0,5 %.
A
25
50
0
B0825
I~
99 %
B0224GB
As previosly mentioned the transducer output is a DC signal and from that follows that one or several moving-coil
instruments often serve as the indicating part.
In power distribution technology moving-iron instruments
are used for indication and measurements. The movingiron is suppressed in the range 0 20 %, while it is practically linear from 20 to 100 %. If a good A.C. measurement
in the range 0 20 % is needed, the combination transducer moving-coil instrument is a suitable choice.

Linearity
Casing
A transducer is linear when the output is proportional to the

input. A deviation from a linear function is called a non-linearity error and is expressed as a percentage of a range in
our data sheets.
The casing is made of self-extinguishing polycarbonate.
Output
I max
Ideal
function
Input
Non linearity =
I out
Iout max
B0100
True function
x 100 [%]
Auxiliary supply voltage

Cewe Instrument transducers with some exceptions are
designed for 110 V A.C. or 230 V A.C. 20 % auxiliary
supply voltage. Further information on this can be found in
the preamble of each transducer type description.
Cewe Instrument transducers are also manufactured with
a switched power supply in two ranges; 18 80 V AC/DC
and 80 276 V AC/DC.
In case of auxiliary supply with a DC voltage the connection is unaffected by the polarity.
Types DU 120 and DI 120 do not require an auxiliary
power supply.
The accuracy class

Nominal accuracy class 0.5. Optional 0.2
Cewe Instrument transducers are calibrated to a nominal
accuracy value with a maximum error of 0.1% for class 0.2
transducers, and 0.2% for class 0.5 transducers. The reference conditions are a power factor of 1.0.
Additional class number factors which influence the accuracy are:
Auxiliary supply voltage variations
The auxiliary supply voltage can be varied within wide limits,

without any appreciable affection of the measuring accuracy.
Measurement error is less than 0,1 % of measuring range.
Tropical design
In environments with a high temperature, high relative humidity and corrosive atmosphere the tropical design gives
a good protection.
Standard design
Tropical design
Relative humidity max 85%

for max 60 days per year.
Otherwise max 75%
Year average max 65%
Relative humidity max 95%

for max 30 days per year.
Otherwise max 85%
Year average max 75%
Mounting position
The measuring transducers can be mounted in any arbitrary
position. The mounting position does not affect the measuring accuracy.
Temperature range
Under general data for each transducer type, the three
temperature ranges are given: working temperature -10
+55C, function temperature -20 +65C and storage
temperature -65 +80C.
Working temperature range imply the temperature range
within which the given data are valid.
Function temperature range imply the transducer functions
within this range, but can show a somewhat higher temp.
coefficient.
Storage temperature range imply that the transducer stands
to be stored within this temperature interval witout being
damaged.
Mounting
The transducers are mounted easily and quickly on DIN
rail type DIN EN 50022 35.
A plastic DIN rail, Art No. 4025, can be supplied for
mounting single transducers. The rail can easily be cut to
the correct length for the relevant case size. See page 59.
Connections
Temperature variations
Cewe Instrument transducers are calibrated at an ambient

temperature of +23C. At other temperatures a temperature
error has to be added. This error varies between different
transducer types. The temperature dependence is separately
given in each data sheet.
The screw terminals are located on the front of the transducer and have a so-called self-opening washer, which facilitates assembly.
The terminals can accept a maximum conductor area of
2x2.5 mm2. The transducers are always supplied with
protection against accidental contact.
Phase angle variations
Forms of enclosure (Protection degrees)
The phase angle between the current and the voltage is of

great importance when measuring the power. The additional error obtained when the phase angle varies is small and
is expressed within the indicated class number as a % of
the full output signal at 90. The values can be found in
the product data sheet for the transducer concerned.
10
Case seal
Terminal part
= IP 51
= IP 20

Standards
Cewe Instrument measurement transducers are tested according to the standards of the EMC Directive and according to IEC 60255-5 and -6 Interference environ-mental
classes and test regulations for electronic apparatuses in
control equipment for power stations.
The transducers are manufactured to IEC 60688-2.2.
EMC directives
IEC 61000-6-3
IEC 61000-6-4
IEC 61000-6-1
IEC 61000-6-2
Emissions
Emissions
Immunity
Immunity
light industry
heavy industry
light industry
heavy industry
LVD directive
IEC 61010-1
Safety
IEC 60664-1 Safety
For all transducers that are connected to transformers, the
secondary side of the transformer must be provided with a
protective earth.
Output signals
e *)
Output
d*)
Output
Input
Input
Input
Example
0 10 mA
corresponding to
0 100 A
Live Zero
4 20 mA
corresponding to
0 100 A
Suppressed Zero
0 10 mA
corresponding to
8 12 kV
F *)
Output
Compressed lower region

0 1 10 mA
corresponding to
0 8 12 kV
Input
Bipolar
10 0 10 mA
corresponding to
100 0 100 kW
Input
h*)
Output
Input
Compressed lower region

live Zero
4 6 20 mA
corresponding to
0 8 12 kV
Compressed upper region

0 16 20 mA
corresponding to
0 200 800 A
Input
Zero displacement
0 5 10 mA
corresponding to
100 0 100 kW
Output
Input
Output
*) Normally the knee

point should not be
closer than 20 % to
the end value.
Output
Suppressed Zero
Live Zero
4 20 mA
corresponding to
8 12 kV
Input
Output
G *)
Output
Input
C*)
Output
Compressed upper region

live zero
4 17 20 mA
corresponding to
0 200 800 A
Output
Input
Zero displacement
4 12 20 mA
corresponding to
100 0 100 kW
B0808GB
The maximum load resistance (at current output) is calculated from the formula:
RL max [k] =
15 [V]
Output; [mA]
11
Transducers DU for AC voltage

Transducers type DU transforms sinusoidal AC voltage
to a proportional load independent DC signal. The input
signal can be connected either directly to the transducer, or
via a transformer (VT).
Transducer type DU 120 does not require auxiliary supply.
Dimensions and weights
DU 121 to DU 125
DU 120
T2
UN~
UN~
+
- Output
B0692GB
Uaux.~
+
-
Output
B0110GB
T1
See page 58
Output
Accuracy class
0.5
0.2*) (Option)
Nominal accuracy
Non-linearity
Load dependence
Response time
Aux. supply dependence
Temperature coefficient
Max open circuit output voltage
Max output signal by overload*)
0.2
< 0.2 %
< 0.05 %
< 300 ms
< 0.1 % for Uaux. 20 %
< 0.1 %/10C
20 V
125%
0.1
< 0.1 %
< 0.05 %
< 300 ms
< 0.1 % for Uaux. 20 %
< 0.1 %/10C
20 V
125%
*)
Not DU 120
General data
Working temp. range
Function temp. range
Storage temp. range
Test voltage

Overload
-10 +55C
-20 +65C
-65 +80C
3.7 kV at UN 300 V
5.55 kV at 300 V < UN < 600 V
1.2 x UN continuosly, varistor protection 1.5 x UN
Output signals**)
a
Output
Input
Input
Input
Output
Input
B0816GB
Input
Input
Output
**) The availability

of output signal
per type, see
page 13 and 14

Output
Input
Output
Output
Input
Output
Output
12

DU 120
DU 120
Input
0 40525 V 1)
Input voltage (UN)
Burden
< 1.2 VA
Frequency
50 or 60 Hz
Does not require auxiliary supply.
Utgng/Output/Ausgang
15 16
Kpa 1
Casing size 1
Gehuse 1
Output
Output signal
rated value 1)
2 5
1 mA
2.5 mA
5 mA
10 mA
20 mA
U~
B0819A
Ingng/Input/Eingang
Connection
DU 121 to 122
DU 121 - 122
Input
0 40600 V 1)
Input voltage (UN)
Burden
1 mA x UN
Frequency 16/, 50/60, 400 Hz
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
14 15 16
Output
Output signal
rated value 1)
Kpa 1
Casing size 1
Gehuse 1
13 2
1 mA
2.5 mA
5 mA
10 mA
20 mA
5 V
10 V
5
U~
Connection
B0818A
Ingng/Input/Eingang
Hjlpspnning: Vxelspnning
Auxiliary supply: AC voltage
Hilfsspannung:
Wechselspannung
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
Other values on request.
1)
A
A
A
A
A
Load resistance RL
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, C
A, C
Load resistance RL
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
> 2 k
> 2 k
Auxiliary voltage
Unit 2) Voltage Frequency
1
2
92 138 V AC
184 276 V AC
Burden
45 65 Hz 2 VA
45 65 Hz 2 VA
1)
2)
Third digit in the type designition, shows type of auxiliary supply.
13

DU 124 to 125
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
Input
0 40600 V 1)
Input voltage (UN)
Burden
1 mA x UN
Measuring range
0.2 0.99 x UN
Frequency 16/, 50/60, 400 Hz
+ -
15 16
13 14
DU 124 - 125
Output Output signal 2)

rated value 1)
Kpa 3/Casing size 3/Gehuse 3
1 mA
2.5 mA
5 mA
10 mA
20 mA
5 V
10 V
U~
Hjlpspnning: Lik-/vxelspnning
Auxiliary supply: AC/DC voltage
Hilfsspannung: Gleich-/Wechselspannung
B0817F
Ingng/Input/Eingang
Connection
Load resistance RL
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, C, E, G
A, C, E, G
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
> 2 k
> 2 k
Auxiliary voltage
3)
14
Unit Voltage Frequency
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
1)
2)
Curve E, F: Min. supressed lower region is

0-20% of max input value.
Curve G, H: Max. supressed upper region is

80-100% of max input.
3)
Third digit in the type designition, shows type of

auxiliary supply value.

Ordering form DU
DU (Voltage AC)
Default
Example 1
Example 2
Type:
DU 122
DU 122
Accuracy: cl. 0.5
0.5
0.5
Transf. ratio voltage:
11000/110 V
11000/110 V
Frequency: 50 Hz
50 Hz
50 Hz
Measuring range:
0-13,2 kV
0-8-12 kV
Input signal:
0-132 V
0-88-132 V
Output:
4-20 mA
0-1-10 mA
Output curve:
Response time: 300 ms
300 ms
300 ms
Auxiliary supply:
184-276 V AC
184-276 V AC
15
Transducers DI for AC current

Transducers type DI transform sinusoidal AC current to a
proportional load independent DC signal. The input signal
can be connected either directly to the transducer, or via a
transformer.
Transducer DI 11 does not require auxiliary supply.
DI 121 to DI 125
DI 120
T2
IN ~
IN~
=
+
-
Output
B0425GB
Uaux.~
Output
B0115GB
T1
See page 58
Output
Accuracy class
0.5
0.2*) (Option)
Nominal accuracy
Non-linearity
Load dependence
Response time
Max output signal by overload*)
0.2
< 0.2 %
< 0.05 %
< 300 ms
< 0.1 % for Uaux. 20 %
< 0.1 %/10C
20 V
125%
0.1
< 0.1 %
< 0.05 %
< 300 ms
< 0.1 % for Uaux. 20 %
< 0.1 %/10C
20 V
125%
*)
Not DI 120
General data
Working temp. range
Storage temp. range
Test voltage

-10 +55C
-20 +65C
-65 +80C
3,7 kV Standard (UN < 300 V),
5,55 kV, Option (300 V < UN < 600 V)
Overload
2 x IN continuosly, 10 x IN during 10 s, 40 x IN during 1 s
Output signals**)
a
Output
Input
Input
Input
Output
Input
B0816GB
Input
Input
Output
**) The availability

of output signal
per type, see
page 17 and 18

Output
Input
Output
Output
Input
Output
Output
16

DI 120
DI 120
Input
1.0, 1.2, 5.0, 6.0 A 1)
Input current (IN)
Burden
< 0,25 to < 1.2 VA
Frequency
50/60 Hz at Class 0.5
Does not require auxiliary supply.
Utgng/Output/Ausgang
15 16
Kpa 1
Casing size 1
Gehuse 1
Output
Output signal
rated value 1)
3
I~
1 mA
2.5 mA
5 mA
10 mA
20 mA
B0823A
Ingng/Input/Eingang
Connection
DI 121 to 122
DI 121 - 122
Input
1.0, 1.2, 2.0, 2.4, 5.0, 6.0 A 1)
Input current (IN)
Burden
< 0.04 to < 0.2 VA
Frequency 16/, 50/60, 400 Hz
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
14 15 16
Output
Output signal
rated value 1)
Kpa 1
Casing size 1
Gehuse 1
13 1 3
I~
B0822A
Ingng/Input/Eingang
Hjlpspnning:
Vxelspnning
Auxiliary supply: AC voltage
Hilfsspannung:
Wechselspannung
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
1)
A
A
A
A
A
Load resistance RL
1 mA
2.5 mA
5 mA
10 mA
20 mA
5 V
10 V
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, C
A, C
Load resistance RL
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
> 2 k
> 2 k
Connection
Auxiliary voltage
2)

1
2
92 138 V AC
184 276 V AC
Burden
45 65 Hz 2 VA
45 65 Hz 2 VA
1)
2)
17

DI 124 to 125
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
15 16
Input
1.0, 1.2, 2.0, 2.4, 5.0, 6.0 A 1)
Input current (IN)
Burden
< 0.04 to < 0.2 VA
Frequency 16/, 50/60, 400 Hz
+ -
DI 124 - 125
Output Output signal

rated value 1)
1 mA
2.5 mA
5 mA
10 mA
20 mA
5 V
10 V
3
I~
Hjlpspnning:
Lik-/vxelspnning
Auxiliary supply: AC/DC voltage
Hilfsspannung:
Gleich-Wechelspannung
Connection
B0821B
Ingng/Input/Eingang
Load resistance RL
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, B, C, D, E, F, G, H
A, C, E, G
A, C, E, G
0 15 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
> 2 k
> 2 k
Auxiliary voltage
2)
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
1)
2)
Ordering form DI
DI (Current AC)
Default
Example 1
Example 2
Type:
DI 125
DI 120
Accuracy: cl. 0.5
0.5
0.5
Transf. ratio current:
100/5 A
100/5 A
Frequency: 50 Hz
50 Hz
50 Hz
Measuring range:
0-120 A
0-120 A
Input signal:
0-6 A
0-6 A
Output:
4-20 mA
0-20 mA
Output curve:
Response time: 300 ms
300 ms
Auxiliary supply:
80-276 V AC/DC
18
300 ms

Transducers DUD for DC VOLTAGE AND diD for DC CURRENT

Transducers type DUD and DID are used to measure DC
voltage and DC current that are converted into a proportional load-independent galvanic isolated DC voltage or DC
current signal.
T1

See page 58
UAUX
Type dud
+
UN=
T1
Output/
UAUX
Type did
+
B0730GB
Output/
IN=
Output data
Accuracy class
0.5
0.2 (Option)
Linearity error
Load-dependence
Response time (0-99%)
Auxiliary voltage dependence
Temperature dependence
Max voltage with open output
Max output signal with over-driven input signal
Ripple (peak-to-peak)
< 0.2 %
<0.05 %
50 100 ms
< 0.1 %
< 0.1 %/10 C
20 V
<125 %
<1.0 %
<0.1 %
<0.05 %
50 100 ms
< 0.1 %
< 0.06 %/10 C
20 V
<125 %
<0.5 %
General data
Working temp. range
Storage temp. range
Test voltage
-10 +55 C
-20 +65 C
-65 +80 C
5.55 kV, 50 Hz
Output signals
B
Output
Input
Input
Output
Input
Output
Output
Output
Input
Input
Output
Input
Output
Input
B0857GB
19

DUD 124 to 125, DC voltage
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
Input data
Measured voltage (UN)
Input resistance

+ -
13 14
15 16
Output signal 1)
DUD 124-125
B0856E
Ingng/Input/Eingang
Connection
0 1 mA
0 2 mA
0 2,5 mA
0 5 mA
0 10 mA
0 20 mA
4 20 mA
0 1 V
0 2 V
0 5 V
0 10 V
0 60 mV.....0 600 V
40 k/V measuring range 0 0,5 V
10 k/V measuring range 0 600 V
Curve
Load resistance RL
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
0 15 k
0 7.5 k
0 6.0 k
0 3.0 k
0 1,5 k
0 750
0 750
> 2 k
> 2 k
> 2 k
> 2 k
Auxiliary voltage
2)
1)
2)

auxiliary supply.
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
DID 124 to 125, DC current

Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
15 16
Input data
Measuring current (IN)
Shunt voltage
+ -
Output signal 1)
DID 124-125
B0856F
Ingng/Input/Eingang
0 1 mA.....0 200 mA
max 0,15 V
Connection
0 1 mA
0 2 mA
0 2,5 mA
0 5 mA
0 10 mA
0 20 mA
4 20 mA
0 1 V
0 2 V
0 5 V
0 10 V
Curve
Load resistance RL
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
0 15 k
0 7.5 k
0 6.0 k
0 3.0 k
0 1,5 k
0 750
0 750
> 2 k
> 2 k
> 2 k
> 2 k
Auxiliary voltage
2)
1)
2)

auxiliary supply.
20
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC

Ordering form DUD
DUD (Voltage DC)
Default
Example
DUD 125
Type:
Accuracy:
cl. 0.5
Input signal:
0.5
0-60 mV
Output:
0-20 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
80-276 V AC/DC
Ordering form DID

DID (Current DC)
Default
Example
Type:
DID 124
Accuracy:
0.5
cl. 0.5
Input signal:
4-20 mA
Output:
4-20 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
18-80 V AC/DC
21
Transducers DF for frequency

Transducers type DF are used for the measurement of the
frequency of an AC voltage and transforms it into a proportionally load independent DC signal. The input can be
connected directly or via a transformer.


See page 58
Uaux.~
+
UN~
Output 1
B1040GB
Microprocessor
+
-
Output
Accuracy class
Non-linearity
Load dependence
Response time
0.1
< 0.05 %
< 0.05 % (within load limits)
< 300 ms
< 0.05 % for Uaux. 20 %
< 0.1 %/ 10C
20 V
General data
Working temp. range
Storage temp. range
Test voltage
Overload capacity
-10 +50C
-10 +50C
-20 +60C
3.75 kV, 50 Hz
Uin x 2, rated for 1 sec
Output signals
a
Output
Input
B0855GB
Input
Output
22
Output 2
Transducers df for frequency

DF 125, 127
Connection single output

Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
16 15
Input
Input voltage (UN)
Working range
Power consumption
- +
Auxiliary supply
DF 125, 127
Voltage DF 125
Power consumption
Voltage DF 127
Power consumption
2 11
U~
45 55 Hz
48 52 Hz
Connection dual output

Hjlpspnning
Uaux. supply
Hilfsspannung
13 14
80 275 V AC/DC(20%)
< 2.0 VA/<3.0 W
24 48 V DC(-15% to +33%)
< 2.0 VA/< 3.0 W
Measuring range
B0828B
Ingng/Input/Eingang
80500 V
(40 120) x UN
< 0.5 VA
55 65 Hz
Utgng
Output
Ausgang
58 62 Hz
- + - +
Output signal 1)
18 17 16 15
DF 125, 127
2 11
Ingng/Input/Eingang
B0828C
U~
1)
Curve
Load resistance RL
0 10 mA A
0 600
0 20 mA A
0 600
4 20 mA B
0 600
0 10 V A
> 2 k
0 5 V A
> 2 k
1 5 V A
> 2 k
Ordering form DF
DF (Frequency)
Default
Example
Type:
DF 125
Accuracy:
0.1
cl. 0.1
Measuring range:
48-52 Hz
Voltage:
110 V
Output 1:
0-10 mA
Output curve 1:
Output 2:
Output curve 2:
Auxiliary supply:
110 V DC
23
Transducers for power factor

Our programmable transducer DPT can be used for
measuring power factor, se separate product presentation.
24
Transducers for power factor

Brief description
The Programmable Transducer type DPT has in a fully equipped version; four analogue channels for any instantaneous measured value, with a output signal of mA or V, galvanic insulated from each other and from the
input signals , two digital pulse outputs for energy and a Modbus RTU with all measured values available.
Easy programmed with the belonging software CofigView connected with a standard USB cable. Available as
ConfigView or as a ConfigView kit, software and USB cable.
The Transducer is meant for DIN rail mounting and has the dimensions 71x101,4x113,8mm (h x w x d)
The Transducer is designed according to the standard IEC 60688 and reaches the accuracy class 0.2 or 0.5 as
per your order.
All essential measuring values can be programmed to the outputs and are available through Modbus communication, the connection of the input signals can be freely programmed for single phase, 3 phase 3 wire as well
as 3 phase 4 wire and for both balanced and unbalanced load.
Both input voltage and input current as well as auxiliary supply are of wide range type.
See separate product presentation.
25
Transducers DP, DQ and DPQ for active and reactive power
Scale
factor =
Measuring range [W or Var]

(Normally 0.3 1.8)
Nominal apparent power [VA]
T1
dP, dq
UAux
=
T2
UN ~
T3
IN ~
T1
UAux
dPq
=
T2
UN ~
T3
Overload

-10 +55C
Fundamental circuit
-20 +65C
-65 +80C
5.55 kV, 50 Hz (measurement input signal/outputs)
3.7 kV, 50 Hz (auxiliary voltage input signal/outputs)
1.5 kV, 50 Hz (signal output (P) signal output (Q)
1.2 x UN continuous, varistor protection 1.5 x UN
2 x IN continuous, 10 x IN during 10 s, 40 x IN during 1 s

See page 58
Output data
Accuracy class
0.5
0.2 (option)
Nominal accuracy
0.2
0.1
Linearity error
< 0.2 %
< 0.1 %
Load-dependence
< 0,05 %
< 0,05 %
< 300 ms
< 300 ms
Response time (T99)
< 0.1 %
< 0.1 %
< 0.2 %/10C
< 0.2 %/10C
20 V
20 V
Max output signal with over-driven
Input signal
<125%
<125%
Linearity
Output
Non linearity =
26
I out
Iout max
x 100 [%]
I max
Ideal
function
True function
Input
B0100
A transducer is linear when the output is proportional to

the input. A deviation from a linear function is called a
non-linearity error and is expressed as a percentage of a
range in our data sheets.
Output Q
B0850GB
Working temp. range

Storage temp. range
Test voltage
Output P
IN ~
General data
Output
B0768GB
Transducer type DP, DQ and DPQ measures the active

(P) and reactive (Q) A.C.-power and converts these into
proportional load-independent DC current signals. The
measurement principle for multiplication of the current
and the voltage is based on the TDM (Time-Division-Multiplication) method. The measurement principle also takes
account of the curve form error and the phase angle difference ( = 0 360) between the current and the voltage
and gives the true power value (true RMS) as its result. In
transducer DPQ the signal outputs (P) and (Q) are galvanically separated from one another.
The measurement voltage and measurement current can be
connected directly to the transducer or via measurement
transformers. The permitted value for the scale factor shall
lie within the range 0.3 1.8 and shall be defined by the
scale factor formula. The current may not exceed 10 A.
Transducers DP for active power

Product range summary
The models of measuring transducers available for measuring the active power are shown in the table. Configuration
of the measuring transducer with regard to the output rated
value and the desired functional curve are shown in the
tables and diagram on page 28 34.
Designition

Number of
System Auxiliary
mesuring supply
elements
Casing
size
DP 124
1E, 1.phase/2-wire, (ph/n)
18 80 V AC/DC 3
DP 125
1E, 1.phase/2-wire, (ph/n)
80 276 V AC/DC 3
DP 134
1E, 3-wire, balanced load
18 80 V AC/DC 3
DP 135
80 276 V AC/DC 3
DP 144
1E, 4-wire, (ph/n), balanced load
18 80 V AC/DC 3
DP 145
1E, 4-wire, (ph/n), balanced load
80 276 V AC/DC 3
DP 234
2E, 3-wire, unbalanced load
18 80 V AC/DC 3
DP 235
80 276 V AC/DC 3
DP 334
3E, 3-wire or 4-wire
18 80 V AC/DC 4
DP 335
80 276 V AC/DC 4
DP 344
18 80 V AC/DC 4
DP 345
80 276 V AC/DC 4
Auxiliary voltage
Unit*) Voltage Frequency
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
*) Third digit in the type designition, shows type of auxiliary supply.
27

Output signals
a
Output
Output
Input
Input
Output
Input
Output
Input
B0809GB
Input
Output
28

Hjlpspnning
Uaux. supply
Hilfsspannung
DP 124 to 125
Utgng
Output
Ausgang
Input data
40 to 600 V 1)
Measurement voltage (UN)
Internal consumption
1 mA per phase x UN
Measurement current (IN)
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
13 14
DP 124 - 125
1
k
L1
N
3 11
l
L
RL max [k] =
B0792B
Lgspnningssystem
Low voltage system
Niederspannungssystem
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
13 14
15 16
DP 124 - 125
2 3 11
L1
N
V K
1)
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
x
B0793B
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
15 [V]
Output current [mA]
Connection
29

Hjlpspnning
Uaux. supply
Hilfsspannung
DP 134 to 135
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DP 134 - 135
L1
L2
L3
2 3
k
5 8
l
L
RL max [k] =
x
x
x
B0796B
Lgspnningssystem
Low voltage system
15 [V]
Output current [mA]
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
15 16
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
DP 134 - 135
L1
L2
L3
u v
VK
Connection
30
2 3
k
5 8
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
1)
B0797B
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Hjlpspnning
Uaux. supply
Hilfsspannung
DP 144 to 145
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DP 144 - 145
L1
L2
L3
N
2 3 11
k
l
L
RL max [k] =
x
x
x
B0794B
Lgspnningssystem
Low voltage system
Connection
13 14
15 16
DP 144 - 145
L1
L2
L3
N
VK
2 3 11
k
1)
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
x
x
x
B0795B
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
Hjlpspnning
Uaux. supply
Hilfsspannung
15 [V]
Output current [mA]
Connection
31

Hjlpspnning
Uaux. supply
Hilfsspannung
DP 234 to 235
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DP 234 - 235
L1
L2
L3
2 3 5
k
7
k
8 9
l
RL max [k] =
x
x
x
B0798B
Lgspnningssystem
Low voltage system
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
13 14
15 16
DP 234 - 235
2 3 5
7 8
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
1)
L1
L2
L3
VK
l
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
Connection
32
x
x
x
B0799B
u v
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Hjlpspnning
Uaux. supply
Hilfsspannung
DP 334 to 335
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DP 334 - 335
L1
L2
L3
N
2 3 4 5
L k
8 9
l
L
K
RL max [k] =
x
x
x
B0851B
Lgspnningssystem
Low voltage system
Output
Output signal
rated value 1)
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
15 16
13 14
DP 334 - 335
1
u
L1
L2
L3
N
8 9
1)
k
K
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
L
K
Load resistance RL
x
x
x
B0852B
u v
2 3 4 5
15 [V]
Output current [mA]
Connection
33

DP 344 to 345
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
13 14
DP 344 - 345
L1
L2
L3
N
2 3 4 5
L k
8 9 11
k
L
K
xx
RL max [k] =
x
x
x
B0800B
Lgspnningssystem
Low voltage system
Connection
H lpspnning
Uaux supply
Hil sspannung
Utgng
Output
Ausgang
15 16
13 14
DP 344 - 345
u u u
x x x
X X X
L1
L2
L3
N
U U U
Connection
34
2 3 4 5
8 9 11
L
K
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
xx
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
1)
x
x
x
B0801B
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, KL
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Ordering form DP
DP (Active power)
Default
Example
Type:
DP 235
Accuracy:
0.5
cl. 0.5
11000/110 V
100/5 A
Frequency:
50 Hz
50 Hz
Measuring range (P):
0-2 MW
Output (P):
4-20 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
80 - 276 V AC/DC
35
Transducers DQ for reactive power

The models of measuring transducers available for measuring the reactive power are shown in the table. Configuration of the measuring transducer with regard to the output
rated value and the desired functional curve are shown in
the tables and diagram on page 37 41.
Designition

Number of
System Auxiliary
Casing
mesuring supply
size
elements
DQ 134
18 80 V AC/DC 3
DQ 135
80 276 V AC/DC 3
DQ 234
18 80 V AC/DC 3
DQ 235
80 276 V AC/DC 3
DQ 334
18 80 V AC/DC 4
DQ 335
80 276 V AC/DC 4
DQ 344
18 80 V AC/DC 4
DQ 345
80 276 V AC/DC
4
Auxiliary voltage
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
36

Output signals
B
Output
Output
Input
Input
Output
Input
Output
Input
Output
Input
B0809GB
37

Hjlpspnning
Uaux. supply
Hilfsspannung
DQ 134 to 135
Utgng
Output
Ausgang
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
13 14
DQ 134 - 135
L1
L2
L3
3 5 8
k
l
L
RL max [k] =
x x
x
B0802B
Lgspnningssystem
Low voltage system
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
15 16
13 14
DQ 134 - 135
L1
L2
L3
VK
3 5
k
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
Connection
38
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
1)
x
x
x
B0803B
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Hjlpspnning
Uaux. supply
Hilfsspannung
DQ 234 to 235
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DQ 234 - 235
L1
L2
L3
2 3 5
7 8 9
k
RL max [k] =
Lx
B0804B
Lgspnningssystem
Low voltage system
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
15 16
DQ 234 - 235
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
1)
L1
L2
L3
u v
VK
2 3 5
7 8 9
Hgspnningssystem
High voltage system
Hochspannungssystem
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
L
K
Load resistance RL
x
x
x
B0805B
15 [V]
Output current [mA]
Connection
39

DQ 334 to 335
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DQ 334 -335
L1
L2
L3
N
2 3 4 5
L k
6 7
l
L
K
RL max [k] =
x
x
x
B0853B
Lgspnningssystem
Low voltage system
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
13 14
15 16
DQ 334 -335
2 3 4 5
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
8 9
1)
L1
L2
L3
N
Connection
40
k
K
L
K
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
B0854B
u v
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

DQ 344 to 345
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
13 14
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16
DQ 344 -345
L1
L2
L3
N
2 3 4 5
6 7
L k
RL max [k] =
L
K
xx
x
x
x
B0806B
Lgspnningssystem
Low voltage system
Connection
H lpspnning
Uaux supply
Hil sspannung
Utgng
utput
usgang
13 14
15 16
DQ 344 -345
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
1)
8 9
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
u u
x x x
L1
L2
L3
N
Output
Output signal
rated value 1)
X X X
U U U
k
K
L
K
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
xx
B0807B
2 3 4 5
15 [V]
Output current [mA]
Connection
41

Ordering form DQ
DQ (Reactive power)
Default
Example
Type:
DQ 235
Accuracy:
0.5
cl. 0.5
11000/110 V
100/5 A
Frequency:
50 Hz
50 Hz
Measuring range (Q):
0-2 Mvar
Output (Q):
4-20 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
42
80 - 276 V AC
Transducers DPQ for active and reactive power

The models of measuring transducers available for measuring the active and reactive power are shown in the table.
Configuration of the measuring transducer with regard to
the output rated value and the desired functional curve are
shown in the tables and diagram on page 44 49.
Designition

Number of
System
mesuring
elements
Auxiliary
supply
Casing
size
DPQ 134
18 80 V AC/DC
DPQ 135
80 276 V AC/DC
DPQ 144
18 80 V AC/DC
DPQ 145
80 276 V AC/DC
DPQ 234
18 80 V AC/DC
DPQ 235
80 276 V AC/DC
DPQ 334
18 80 V AC/DC
DPQ 335
80 276 V AC/DC
DPQ 344
18 80 V AC/DC
DPQ 345
80 276 V AC/DC
Auxiliary voltage
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
43

Output signals
a
Output
Output
Input
Input
Output
Input
Output
Input
B0809GB
Input
Output
44

Hjlpspnning
Uaux. supply
Hilfsspannung
DPQ 134 to 135
Utgng
Output
Ausgang
P
Q
- +
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16 17 18
13 14
DPQ 134 - 135

1 2 3 5 8
k
L1
L2
L3
RL max [k] =
x
x
x
B0751B
Lgspnningssystem
Low voltage system
+
13 14
Utgng
Output
Ausgang
P
Q
- +
15 16 17 18
DPQ 134-135
1 2 3 5 8
L1
L2
L3
k
K
1)
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
B0753B
u v
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
15 [V]
Output current [mA]
Connection
45

Hjlpspnning
Uaux. supply
Hilfsspannung
DPQ 144 to 145
Utgng
Output
Ausgang
P
Q
- +
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16 17 18
13 14
DPQ 144-145
1 2 3 11 8
k
RL max [k] =
x
x
x
Lgspnningssystem
Low voltage system
B0754B
L1
L2
L3
N
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
+
13 14
15 16 17 18
DPQ 144-145
1 2 3 11 8
1)
X X X
U U U
Connection
46
l
L
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
B0755B
u u u
x x x
L1
L2
L3
N
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
P
Q
- +
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Hjlpspnning
Uaux. supply
Hilfsspannung
DPQ 234 to 235
Utgng
Output
Ausgang
P
Q
- +
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16 17 18
13 14
DPQ 234-235
1 2 3 5 7 8 9
L1
L2
L3
RL max [k] =
x
x
Lx
B0756B
Lgspnningssystem
Low voltage system
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
+
13 14
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Utgng
Output
Ausgang
P
Q
- +
15 16 17 18
DPQ 234-235
1 2 3 5 7 8 9
1)
L1
L2
L3
VK
Hgspnningssystem
High voltage system
Hochspannungssystem
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
L
K
Load resistance RL
x
x
x
B0757B
u v
15 [V]
Output current [mA]
Connection
47

Hjlpspnning
Uaux. supply
Hilfsspannung
DPQ 334 to 335
Utgng
Output
Ausgang
P
Q
- +
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16 17 18
13 14
DPQ 334-335
1 2 3 4 5 6 7 8 9
L1
L2
L3
N
L
K
L
K
RL max [k] =
x
x
x
B0758B
Lgspnningssystem
Low voltage system
+
13 14
Utgng
Output
Ausgang
P
Q
- +
15 16 17 18
DPQ 334-335
1 2 3 4 5 6 7 8 9
u
k
U
L1
L2
L3
N
Connection
48
1)
L
K
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
x
x
x
B0759B
u v
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
15 [V]
Output current [mA]
Load resistance RL
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k

Hjlpspnning
Uaux. supply
Hilfsspannung
DPQ 344 to 345
Utgng
Output
Ausgang
P
Q
- +
Input data
40 to 600 V 1)
1 mA per phase x UN
1, 2, 5 A 1)
<0.1 VA per phase
Frequency 16/, 50, 60, 400 Hz
15 16 17 18
13 14
DPQ 344-345
1 2 3 4 11 6 7 8 9
L1
L2
L3
N
L
K
L
K
xx
RL max [k] =
x
x
x
B0760B
Lgspnningssystem
Low voltage system
Connection
H lpspnning
aux supply
Hil sspannung
13 14
15 16 17 18
DPQ 344-345
1 2 3 4 11 6 7 8 9
1)
u u u
x x x
L
K
Hgspnningssystem
High voltage system
Hochspannungssystem
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, B, I, K, L
A, I, K
A, I, K
A, I, K
A, I, K
0 15 k
0 7,5 k
0 6 k
0 3 k
0 1.5 k
0 750
> 2 k
> 2 k
> 2 k
> 2 k
L
K
Load resistance RL
xx
x
x
x
B0761B
L1
L2
L3
N
Output
Output signal
rated value 1)
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
1 V
2 V
5 V
10 V
tgng
utput
usgang
15 [V]
Output current [mA]
Connection
49

Ordering form DPQ
DPQ (Active and reactive power combined)
Default
Example
Type:
DPQ 145
Accuracy:
0.5
cl. 0.5
113 kV/1103 V
100/5 A
Frequency:
50 Hz
50 Hz
Measuring range (P):
0-2 MW
Measuring range (Q):
0-1 Mvar
Output (P):
4-20 mA
Output (Q):
4-20 mA
Output curve (P):
Output curve (Q):
Response time:
300 ms
300 ms
Auxiliary supply:
50
80-276 V AC&DC
Transducers Dr for resistanCE

Type DR 134 to 435
Transducers type DR are used to measure resistance that is

converted into a proportional, load-independent galvanic
isolated DC voltage or DC current signal. Transducer DR can
be connected, for example, to resistance sensors in a two-wire,
three-wire or potentiometer circuit.
Measurement principle, three-wire circuit: This eliminates
the resistive effect of wiring between the transducer and the
sensor. It is essential to use a three-wire circuit with use of
Pt100 sensors, and with combination with linearisation, an
output signal proportional to the temperature is obtained.
Measurement principle, two-wire circuit: This is used in
applications where the resistance of the wiring is negligible
relative to Rx.
Potentiometer circuit: Used in conjunction with mechanical
moving sensors such as position transmitters.
Uaux
dr 133 - 135
+
Output
1
2
Rx
(Potentiometer)
dr 223- 225
1
3
Rx (2-wire)
Output data
dr 333 - 335
0.5
Linearity error
Load-dependence
Response time (0-99%)
Max output signal with
over-driven input signal
Ripple (peak-to-peak)
0.2 (Option)
1
2
< 0.2 %
<0.05 %
50 100 ms
< 0.1 %
< 0.1 %/10C
20 V
<0.1 %
<0.05 %
50 100 ms
< 0.1 %
< 0.06 %/10C
20 V
<125 %
<1.0 %
<125 %
<0.5 %
Rx (3-wire)
dr 433 - 435
1
2
3
B0732GB
Accuracy class
(3-wire)
General data
See page 58
Working temp. range

Storage temp. range
Test voltage
-10 +55 C
-20 +65 C
-65 +80 C
5.55 kV, 50 Hz
Output signals
B
Output
Input
Input
Output
Input
Output
Output
Output
Input
Input
Output
Input
Output
Input
B0857GB
51

Hjlpspnning
Uaux. supply
Hilfsspannung
DR 134 to 435
Utgng
Output
Ausgang
Input data
Measuring range (RX)
Measuring current (I RX)

+ -
15 16
13 14
DR 134-135
B0858B
Rx
Potentiometerkoppling
Potentiometer circuit
Potentiometerschaltung
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
+ -
15 16
13 14
DR 224-225
Output signal
DR 434-435
1 mA
2 mA
2,5 mA
5 mA
10 mA
20 mA
20 mA
1 V
2 V
5 V
10 V
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D, I, K, L
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
B0859B
Rx
Burden
4
5
4 VA/2.5 W
4 VA/2.5 W
18 80 V AC/DC
80 276 V AC/DC
45 65 HzorDC
45 65 HzorDC
2) Third digit in the type designition, shows type of auxiliary supply.
Connection
Hjlpspnning
Uaux. supply
Hilfsspannung
Utgng
Output
Ausgang
Hjlpspnning
Uaux. supply
Hilfsspannung
15 16
13 14
+ -
13 14
Utgng
Output
Ausgang
+ -
15 16
DR 434-435
DR 334-335
1 2
1 2
C
Rx
Connection
52
Connection
B0861B
Rx
Temperaturgivare
Temperature sensors
Temperaturmessgeber
B0860B
Tretrdskoppling
Three-wire circuit
Dreidrahtschaltung
0 15 k
0 7.5 k
0 6.0 k
0 3.0 k
0 1.5 k
0 750
0 750
> 2 k
> 2 k
> 2 k
> 2 k
2)
Tvtrdskoppling
Two-wire circuit
Zweidrahtschaltung
Load
resistance RL
Auxiliary voltage
Output
Output signal
rated value1) DR 134-335
1)
0 100 , ..... 0 10 k
0,2 10 mA (measuring range 0 10 k)
10 mA
(measuring range 0 100 )
3.5 5 mA (PT 100 sensor)

Ordering form DR
DR (Resistance DC)
Default
Example
Type:
DR 134
Measurment principle
Potentiometer
Accuracy:
0.5
cl. 0.5
Input
15x20 ohm
Measuring range:
Output:
0-20 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
18-80 V AC/DC
DR (Resistance DC)
Example
Default
Type:
DR 435
Measurment principle
Temperature
Accuracy:
0.5
cl. 0.5
Sensor:
PT 100 ohm/0C
Measuring range:
0-100C
Output:
0-10 mA
Output curve:
Response time:
300 ms
300 ms
Auxiliary supply:
80-276 V AC/DC
53

Front view
Side view
114
32.5
77*
73
75
= Casing size
73
100
73
B1038GB
54
With terminal protection

Type
Weight g
DU 120
DU 121, DU 122
DU 124 DU 125
280
260
340
DI 120
DI 121, DI 122
DI 124 DI 125
210
250
450
DUD 124 DUD 125
320
DID 124 DID 125
350
DF 125, DF 127
<600
DP 124 DP 145
DP 234 DP 235
DP 334 DP 345
480
510
610
DQ 134 DQ 135
DQ 234 DQ 235
DQ 334 DQ 345
480
510
610
DPQ 134 DPQ 235

DPQ 334 DPQ 345
420
510
DR 134 DR 435
330
55
Cewe Instrument AB
Box 1006 SE-611 29 Nykping SWEDEN
Tel: +46 155 775 00 Fax: +46 155 775 97
e-mail: [email protected] www.ceweinstrument.com
56
A0140e-9

Transducers Catalogue

Uploaded by

Copyright:

Available Formats

Transducers Catalogue

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Transducers Catalogue

Uploaded by

Copyright:

Available Formats

Transducers

Function Output config. Auxiliary

Function Output config. Auxiliary

DP 125 1E, 1-phase/2-wire, (ph/n)

DP 134 1E, 3-wire, balanced load

DP 135 1E, 3-wire, balanced load

DP 144 1E, 4-wire, (ph/n), balanced load

DP 145 1E, 4-wire , (ph/n), balanced load

DP 234 2E, 3-wire, unbalanced load

DP 235 2E, 3-wire, unbalanced load

DP 334 3E, 3- or 4-wire, unbalanced load, without connected neutral A, B, I, K, L

DP 335 3E, 3- or 4-wire, unbalanced load, without connected neutral A, B, I, K, L

DP 344 3E, 4-wire, unbalanced load

DP 345 3E, 4-wire, unbalanced load

DQ 135 1E, 3-wire, balanced load

DQ 234 2E, 3-wire, unbalanced load

DQ 235 2E, 3-wire, unbalanced load

DQ 334 3E, 3- or 4-wire, unbalanced load without connected neutral A, B, I, K, L

DQ 335 3E, 3- or 4-wire, unbalanced load without connected neutral

DQ 344 3E, 4-wire, unbalanced load

DQ 345 3E, 4-wire, unbalanced load

Function Output config. Auxiliary

Active and Reactive Power Combined

DPQ 134 1E, 3-wire, balanced load

DPQ 135 1E, 3-wire, balanced load

DPQ 144 1E, 4-wire, (ph/n), balanced load

DPQ 145 1E, 4-wire, (ph/n), balanced load

DPQ 234 2E, 3-wire, unbalanced load

DPQ 235 2E, 3-wire, unbalanced load

DPQ 334 3E, 3- or 4-wire, unbalanced load , without connected neutral A, B, I, K, L

DPQ 335 3E, 3- or 4-wire, unbalanced load, without connected neutral

DPQ 344 3E, 4-wire, unbalanced load

DPQ 345 3E, 4-wire, unbalanced load

Function Output config. Auxiliary

General description and technical data

an explanation of working principle, block diagram, and

3. No adjustment for wire resistance need to be made in

5. Individual instruments or other measuring or registration

6. Maximum open circuit output voltage is low, 20 V,

Certain A/D-converters and controllers require a positive

General description and technical data

Addition or subtraction of outputs

Using a measuring transducer with a nominal output of 0

The standard response time is 300 ms. A response time of

Transducer Indicating instrument

General description and technical data

A transducer is linear when the output is proportional to the

The casing is made of self-extinguishing polycarbonate.

Auxiliary supply voltage

The accuracy class

Auxiliary supply voltage variations

The auxiliary supply voltage can be varied within wide limits,

Relative humidity max 85%

Relative humidity max 95%

Cewe Instrument transducers are calibrated at an ambient

Phase angle variations

Forms of enclosure (Protection degrees)

The phase angle between the current and the voltage is of

General description and technical data