Cat C9 Specs

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

RV

Diesel Engine
with ACERT
Technology

C9
400 hp @ 2100 rpm
1100 lb-ft @
1400 rpm Peak Torque

CATERPILLAR ENGINE SPECIFICATIONS


In-line 6-Cylinder, 4-Stroke-Cycle Diesel
Bore in (mm) . . . . . . . . . . . . . . . . . . . . 4.41 (112)
Stroke in (mm) . . . . . . . . . . . . . . . . . . 5.87 (149)
Displacement cu in (L). . . . . . . . . . . . . 537 (8.8)
Aspiration . . . . . . . . . . . . . . . . . . . . . Turbocharged
Compression Ratio . . . . . . . . . . . . . . . . . . . . . 17.0:1
Rotation (from flywheel end) . . Counterclockwise
Cooling System 1 gal (L) . . . . . . . . . . . . 4.8 (18)
Lube Oil System (refill) gal (L). . . . . . . 8.5 (32)
Weight, Net Dry (approx) lb (kg)
including flywheel . . . . . . . . . . . . . . . 1500 (680)
Shown with
Optional Equipment

Engine only. Capacity will vary with radiator size and use of cab heater.

STANDARD EQUIPMENT

ACCESSORY EQUIPMENT

Air inlet manifold heater


Cooling belt-driven water pump, oil cooler
Crankcase breather
Diesel Oxidation Catalyst (required)
Electronic Control Module (ECM)
Electronic Data Link, SAE/ATA, SAE/J1939
Fuel spin-on secondary filter, transfer pump
Governor full-range, electronically controlled
HEUI Fuel System
Lifting eyes
Lubrication gear-driven pump, front or rear
sump pan, full flow spin-on filter, oil filler, oil
level gauge (dipstick)
SAE No. 1 flywheel housing
Turbocharger
Vibration damper

Air compressor 15.7 cfm with drive-through


capability
Air conditioner compressor mounting
Air inlet elbow
Automatic transmission adaptation
Auxiliary brake compatible (exhaust)
Fan drive mounting bracket
Flywheel
Front engine support
Front PTO adapter
Fuel priming pump
Hydraulic pump drive, SAE A
Jacket water heater
Rear PTO (RPTO)
Starting motor 12V or 24V
Turbocharger compressor outlet elbow

DIMENSIONS

42.1 in
(1070 mm)

42.1 in
(1070 mm)

49.0 in
(1245 mm)

LEHT4567-00

35.2 in
(894.08 mm)

Page 1 of 3

C9

RV DIESEL ENGINE 400 hp

PERFORMANCE CURVES
400 hp (298 kW)
1125

Torque
lb-ft

1100
1075
1050
1025
1000
975

Power
bhp

400
375
350
325
300
275

1300 1500 1700 1900 2100 2300

Engine Speed rpm

PERFORMANCE DATA
Operating Range (rpm) . . . . . . . . . . . . . 1400-2100
Governed Speed rpm . . . . . . . . . . . . . . . . . . 2100
Advertised hp (kW) . . . . . . . . . . . . . . . . . . 400 (298)
Max hp (kW) . . . . . . . . . . . . . . . . . . . . . . . . 400 (298)
Peak Torque lb-ft (Nm). . . . . . . . . . 1100 (1492)
Peak Torque rpm. . . . . . . . . . . . . . . . . . . . . . 1400
Torque rise (%) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Altitude Capability ft (m). . . . . . . 10,000 (3048)

LEHT4567-00

Page 2 of 3

C9

ELECTRONIC FEATURES

ROUTINE MAINTENANCE
RECOMMENDATIONS

Real time clock with date and time


stamping of critical events
Electronic self-diagnostics

Daily
Walk-around inspection
Check oil level

Compatible with Caterpillar Electronic


Technician (ET)
Cold weather startup strategy and
electronic idle control functions
ECM storage of operational, maintenance,
diagnostic codes and diagnostic data
J1939 compatible

Check coolant level


Check air cleaner service indicator
Drain water separator if water present
Preventive Maintenance (PM Level 1)
Change oil & filter
Scheduled Oil Sampling (SOSSM) analysis
Drain water from fuel tanks and replace fuel
filter
Test coolant (supplemental coolant additive)
Inspect radiator and Air-to-Air Aftercooler
Clean crankcase breather (every other oil
change)
Check belts, hoses, and clamps
Lube fan drive bearing
Inspect, clean batteries
Replace air compressor filter (if equipped)
Inspect cylinder head ground stud
PM Level 1 Recommended Change Intervals
Oil Pan

Miles/Years

32L (34 quarts)

20,000/1

Refer to the operation & maintenance manual


for complete details.

CUSTOMER SERVICE INFORMATION


Customer Call Center (Toll Free) 877-777-3126
Parts & Service Directory
LEGT3466

RATING DEFINITIONS AND CONDITIONS


Performance is based on SAE J1995 standard

conditions of 29.61 in. Hg (100 kPa) and 77 F


(25 C).
The curves shown are for a standard engine
without fan, but equipped with air compressor
and fuel, lubricating oil, and jacket water
pumps.

Customer selectable, re-programmable


operational parameters:
- 2-speed fast idle capabilities
- Adjustable low idle rpm
- Automated Transmission compatibility
- Cooling fan control
- Cruise control with exclusive Soft Cruise
- Customer password protection
- Engine Monitoring System warning,
derate, or shutdown
- Enhanced theft deterrent and secure idle
(Cat Messenger or Pocket Tec required)
- Exhaust brake operational modes
- Fleet Information Software capability
- Idle shutdown timer & override
- Maintenance monitor [miles (km) or
hours]
- OEM parameter lockout
- Progressive shifting and gear-down
protection
- Selectable AT/MT/HT shift points for
automatic transmission
- Vehicle speed [mph (km/h)] limiting and
protection
Programmable Power Take-Off (PTO)
functions:
- Adjustable maximum engine rpm speed
- Adjustable minimum engine rpm speed
- Adjustable ramp rate up or down
between PTO set speed(s)
- Adjustable rpm bump intervals
- Adjustable speed control [mph (km/h)] of
vehicle while in PTO mode
- Limit engine torque to driven equipment
- Multi-speed PTO set speed capability
- Selectable PTO configuration for in cab
or station of remote operation

Materials and specifications are subject to change without notice.


LEHT4567-00 (3-04)

RV DIESEL ENGINE 400 hp

Printed in U.S.A.

The International System of Units (SI) is used in this publication.


2004 Caterpillar
All rights reserved.

You might also like