Building Boq Sample

Item
Description
Qty.
Unit
No.
BILL NO.C
DEMOLISHER
Note:
1. Prior to do pricing the Contractor is adviced to
do a detail inspection of the site related to all
items mentioned under Bill No. C
2.Rate shall include carting away all unusable
materials
3.Temporary support incidental to demolitions
C.1
Allow for disconnection or plugging water, sewer

connections and making good all damages to walls
and floor etc. (Rate to be included necessary con. &
cement & sand mortar)
Item
C.2
Purchesing of reusable items by the contractor.

(Contractor has to offer a price for this marked as
negative ) .
Item
C.3
Allow for removing two existing buildings size

20.00mx18.00m including foundation .
Item
Total carried over to summary

BILL NO. D
EXCAVATION AND EARTH WORK
Note:
Rates shall be included for
1. All necessary boarding supports and erection.
2. Striking or removal clearing, wetting etc.
3. Disposal of excess material and backfill.
D.1
Excavation for column footings
D.2
Excavation for wall foundations, depth n.e 1.0m
D.3
Filling under floor ,earth of approved quality cleaned,

spread,watered and well ramed in 150mm layers.
proposed pavilion at cooray play ground final
Page 1
375.00
30.00
490.00
Rate
Rs.
Item
Description
Qty.
Unit
No.
BILL NO.F
CONCRETE WORK
F1 - INSITU CONCRETE
Note:
1. Mixing, handling, hoisting and depositing into
position.
2. Packing around reinforcement and vibrating.
3. Curing and clearing as specified.
Cement concrete grade 15 (25mm aggregate) for
the following item
F1.1
In 50mm thick under walls foundations
F1.2
In 50mm thick under column footings
F1.3
In 75mm thick floor.
60.00
m2
159.00
m2
70.00
m3
150.00
m3
8.00
m3
Concrete mixture for the following items will be

grade 25 (20mm aggregrate) redy mixed concrete
including pumping where necessary
F1.4
In column footings.
F1.5
In column, up to F.F.L
F1.6
In column, from F.F.L to 3.6m level
28.00
m3
F1.7
In column,
level
21.00
m3
F1.8
In column above pavilion floor
36.00
m3
F1.9
In plinth beams
16.00
m3
F1.10
In stair case
12.60
F1.11
In intermediate beams.
55.00
F1.12
In upper floor beams
52.00
from 3.6m
level to pavilion floor level
Page 2
Rate
Rs.
Item
Description
Qty.
Unit
No.
F1.13
In floor slab
108.00
F1.14
In tiers
180.00
F1.15
In roof beams
35.00
Cement concrete grade 20 (20mm aggregate) for

the following items.
F1.16
In ground floor lintols
5.00
F1.17
In 600mm wide 75mm thick vanity top
1.00
260.00
80.00
F2 - FORM WORK
Note:
Quality of the form work should be approved by
the engineer prior to erection.
F2.1
In sides of column bases
F2.2
In sides of columns up to F.F.L
F2.3
In sides of columns from F.F.L to 3.6m level
290.00
F2.4
In sides of columns from 3.6m level to pavilion floor

level
215.00
F2.5
In sides of column pavilion floor level
395.00
F2.6
In side and soffit of plinth beams
150.00
F2.7
In sides and soffit of intermeddiate beams.
500.00
F2.8
In sides and soffit of roof beams
290.00
F2.9
In sides and soffit of pavilion floor slab and tiers
1,785.00
F2.10
In sides and soffits of upper floor beams
475.00
F2.11
In sides and soffits of lintols in ground floor
70.00
F2.12
In sides and soffits of staircase
90.00
F2.13
In sides and soffits of vanity top
12.00
F3 - REINFORCEMENT IN INSITU CONCRETE

Note:
1. Cleaning, cutting, bending, fabricating with
gauge 18 binding wire and placing in position.
Page 3
Rate
Rs.
Item
Description
Qty.
Unit
No.
2. Holding and supporting including temporary
fixing supports, hingers, binding wire spaces &
tor steel stools.which is required for the proper
completion of the work.
3. Providing all necessary laps.
4.Precast cement distance blocks should be
same grade of concrete with 5mm aggregate.
5. Plain rounded Mild steel of characteristic
strength 250 N/mm to BS4449
6. High Yield steel of characteristic strength 460
N/mm to BS4449 & 4461
Mild steel round bar diameter n.e. 10mm for the
following items
F3.1
In column up to F.F.L
135.00
kg
F3.2
In Columns from F.F.L to 3.6m level
475.00
kg
F3.3
In columns from 3.6m to pavilion floor level
360.00
kg
F3.4
In column from pavilion floor level to roof level
650.00
kg
F3.5
In intermediate beam
1,300.00
kg
F3.6
In floor beams
1,850.00
kg
F3.7
In roof beams
800.00
kg
F3.8
In plinth beam
410.00
kg
200.00
kg
8,150.00
kg
10,000.00
kg
High-yield tor steel bars diameter n.e. 10mm for

F3.9
In lintols in ground floor
F3.10
In floor slabs
F3.11
In tiers
F3.12
In staircase
945.00
kg
F3.13
In vanity top
100.00
kg
3,500.00
kg
High-yield tor steel bars diameter 10-16mm for the

following items.
F3.14
In column bases
F3.15
350.00
kg
F3.16
In columns from F.F.L to 3.6m level
820.00
kg
F3.17
925.00
kg
Page 4
Rate
Rs.
Item
Description
No.
F3.18
In columns above pavilion floor level
F3.19
In plinth beams
F3.20
Qty.
Unit
1,650.00
kg
850.00
kg
In intermediate beams
4,150.00
kg
F3.21
In floor beams
5,400.00
kg
F3.22
In roof beams
2,700.00
kg
850.00
kg
High-yield tor steel bars diameter above 16mm for

F3.23
F3.24
In columns from F.F.L to 3.6m level
2,950.00
kg
F3.25
2,200.00
kg
F3.26
In columns above pavilion floor level
4,150.00
kg

BILL NO G
MASONRY WORKS
G1 - BRICK WORK
225mm thick brick work in cement and sand
mortar 1:5 for the following items
G1.1
In ground floor Up to3.687m
800.00
G1.2
In ground floor from 3.687m to 8.637m
860.00
G1.3
In upper floor
390.00
112.5mm thick brick work in cement and sand

mortar 1:5 for the following items
G1.4
In ground floor
80.00
G1.5
In upper floor
50.00
205.00
G2 - RUBBLE WORK
G2.1
Random rubble masonry in cement & sand mortar 1:5

in foundations,steps and tiers.
BILL NO H
WATER PROOFING
Note:
The water proofing contractor (or sub contractor)
should be a registered specialist contractor at the
ICTAD in the category of water proofing.
Page 5
Rate
Rs.
Item
Description
Qty.
Unit
40.00
No.
The contractor shall submit a written warranty of
at least 5 year to cover on the quality of the
material, suitability of the material for the
situation and the workmanship including water
tightness.
The water proofing material shall confirm to
relevant British, Euro or ASTM specifications.
H.1
Water Proofing the inner surface of walls and floor

Application of "Baralastic" polymer modified
cementitious waterproofing agent after cleaning the
subtrate all as per manufacturer's specifications with
10 years warranty on application.Rate shall include
for ponding test for a 300mm water height kept for a
period of 48 hours in toilet floor and walls up to
300mm.
BILL NO K
METAL WORK
Note:
The work shall include supplying, fabricating and
installation of doors and windows etc. made of
anodized aluminium sections having a minimum
anodic coating of 15 microns thickness & bronze
colour. Rate shall be included for 5mm thick clear
glass, rubber beadings, stainless steel screws,
rawl plugs, neoprene gaskets, locks, aluminium
hinges, bar hinges and push plates etc.
(Extrusions to be
of 1.6mm for minimum
thickness for doors & 1.5mm for windows,1.2mm
for partion). Samples shall be submitted for the
approved of Engineer before use.
K.1
Supply and fix bronze anodized aluminium framed

glazed /alu. Paneled door with aluminium louvers on
top as per detail. (D1 - 1050mm x 2400mm)
02
Nr.
K.2

glazed /alu. Paneled door with aluminium louvers on
top as per detail. (D2 - 900mm x 2400mm)
04
Nr.
K.3
Supply and fix heavy duty PVC framed PVC panelled

door as per detail.
(D3 - 800mm x 2100mm)
15
Nr.
K.4

glazed window with aluminium louvers on top as per
detail. (W1 - 2300mm x 1500mm)
08
Nr.
Page 6
Rate
Rs.
Item
Description
Qty.
Unit

02
Nr.
K.6

01
Nr.
K.7

glazed fanlight as per detail. (F1 - 750mm x 1100mm)
01
Nr.
K.8

02
Nr.
K.9

02
Nr.
K.10
600mm high stainless hand rail consisting 25mm

dia.uprights@ 900mm c/c , 3 nos
20mm
dia.horizontal bar fixed to the uprights and complete
in order with necessary nut & bolits as per detail in
mazzanine floor . Rate to include application of two
coats of anticorossive and two coats of enamal paint
as per detail in stair case. All G.I. bar should be hevy
duty
95.00
lm
No.
K.5

BILL NO. L
WOOD WORK
L1 - JOINERY
Note:
Page 7
Rate
Rs.
Item
Description
Qty.
Unit
10
Nr.
No.
1. Rates shall be included for timber doors,
windows and fanlight 100mm x 75mm frames,
mullions, transom and the like shall be well
seasoned luxury class timber.
2. Timber for doors, windows and fanlight
casements and louvers and trellis work and
28mm
thick sashes shall be well seasoned
Luxury class timber unless otherwise specified.
3. Rates for doors, windows and fanlight shall
include for the following;
a. Heavy quality oxidized brass ironmongery and
locks..
b. M.S.hold fasts concrete spur stones, 5mm thick
glass panes and glazing bars.
c. Apply two coats of wood preservative meterial
to sides of frames in touch with masonary /
concrete surface.
d.Preparing and painting frames & sashes with
two coats enamel paint.
e.Timber classification is according to Sri Lanka
State Timber Corporation Classification.
L.1
Door in 100mm x 75mm luxury timber frame and

28mm thk. luxury timber panelled sash with heavy
duty brass fittings(3nos 100mmx75mm hinges and
150mm barrol bolt and union brand mortice lock)
( DW- 3600mm x 2400mm)
BILL NO .P
ROOF AND ROOF PLUMBING
P.1
Supply and fix zinc alum profile roofing sheet

(minimum base metal thickness of 0.4mm) and
minimum thickness of 0.47mm, laid
on150mmx75mmx15mm x 2.3mm channel purlin @
1200mm c/c with joints to be properly connected with
an adequate side lap to ensure water tightness along
the entire length and complete to working order.
P.2
Supply and fix proprietary coated zinc alum gutter

(minimum base metal thickness of sheet 0.4mm and
minimum total thickness 0.47mm) complete with end
caps, running joints etc. All joints to be properly
connected with an adequate side laps not less than
225mm length and with sealant to ensure water
tightness along the entire length of the gutter and
including angle iron gutter brackets 25x25x3mm at
450mm centers with an adequate slope as directed
and including application of two coats of each
anticorrosive paint and enamel paint to all steel
surfaces to match the gutter fix in position.( Inner size
of 150mm x 175mm )
Page 8
1,900.00
160.00
Rate
Rs.
Item
No.
P.3
P.4
Description
Qty.
Unit
Supply and fix zinc aluminum (minimum base metal

thickness of sheet 0.4mm and minimum total
thickness 0.47mm) down pipes - 100mm x 100mm
approved quality with all necessary specials. Down
pipes brackets @ 1m c/c
300.00
Supply and errecting steel roof truss as per detail.

Rate to include application of two coats of
anticorossive paint and two coats of enamal paint.
09
Nr.
BILL NO. Q
PLUMBING AND SANITARY INSTALLATIONS
Note:
Any other make/brand that has equivalent
performance characteristics are considered as
equivalent provided such fittings met with
following criteria
(a) Has an authorized local agent in Sri Lanka
(b) The local agent has been in the trade of the
offered make for not less than 5 years
(c) The offered sanitary fittings has a 10 Year
manufacturer's warranty issued by the agent.
(d) The cistern mechanism shall have an
assurance for the availability of spares for the
next 3 years.
(e) The fittings are manufactured in conformity to
BS, JIS, A.S.T.M., A.S. or S.L.S. standards
(f) The dimensions are and performance
characteristics are in par with the stated model.
(g)The brands that may be considered as
equivalent are "Ideal" brand, or "Twyford" brand
or any other approved make which prior approval
to be obtained
(h) Plumbing work should be carried out by a
plumber licensed by the CMC and executed in
accordance
with
the
specifications
and
requirement of the Water Supply & Drainage
Division of C.M.C.
(i) Provisions should be made by the tenderers to
submit the necessary plans and the payment of
service connection fee to the National Water
Supply & Drainage Board.
Page 9
Rate
Rs.
Item
Description
Qty.
Unit
No.
(j) All water conduits shall be of standard quality
PVC tubes of approved quality and approved by
the National Water Supply & Drainage Board
gauge to be 1000 UPVC quality.
(k) Rates shall be inclusive of bends, valves,

reduces joints,end caps etc. Necessary for the
installation of service including excavation,
laying, testing, refilling of trench & making good
surface complete.
Q.1
Supply & fix/lay 20mm dia PVC pipes.
100.00
lm
Q.2
Supply & fix/lay 25mm dia PVC pipes.
180.00
lm
Q.3
Supply and fix squatting pan with foot rest of "Rocell"

brand or approved equivalent.
06
Nr.
Q.4
Supply and fix low level plastic cistern for squatting

pan of "Rocell" brand or approved equivalent
including connecting pipe between tank and squatting
pan.
06
Nr.
Q.5
Supply and fix white vitreous china floor standing

close coupled semi back to wall water closet suite
with wash down flushing with 6/3 liters dual flushing
has horizontal outlet with vario drain bend and two
lateral holes for bottom water connection , cistern
with water inlet from rear of "Rocell" brand or
approved equivalent complete to working order
inclusive of universal bend of "Rocell" brand.
07
Nr.
Q.6
Supply and fix Chromium plated hand Bidet Spray of

"American Standared" or approved equivalent.
07
Nr.
Q.7
Supply and installation of vanity type wash basin of

"American Standard" brand, with waste & plug or
approved equivalent. On concrete vanity slab finished
with 3/4" thick approved polished granite tile in black
colour. ( Vanity top concrete slab & Granite tile laying
measured separatly.)Rate to be included approved
quality piller tap.
Q.8
Supply and fix mirror of size 2700mm x 450mm.
04
Nr.
Q.9
Supply and fix mirror of size 800mm x 450mm
02
Nr.
Q.10
Supply and fix 12mm approved quality bib tap.
15
Nr
Q.11
Supplying and fix 12mm dia. chromium plated Angle

valve.
29
Nr.
Q.12
Supply and fix stainless steel soap tray.
02
Nr.
Page 10
16.00
Nr.
Rate
Rs.
Item
Description
Qty.
Unit
Supply and fix chromium plated 600mm long Single

Towel Bar of "Rocell" brand & model "Charming" or
approved equivalent.
02
Nr.
Q.14
Supplying and fixing 25mm wheel valve "Pegler"

Brand or approved equivalent.
06
Nr.
Q.15
Supplying and fixing

chromium plated 20mm
consealed valve for shower.
02
Nr.
Q.16
Supplying and fixing approved quality

plated 20mm shower rose.
chromium
02
Nr.
Q.17
Supplying and fixing wall hang ceramic urinal with

necessary fittings.
04
Nr.
Q.18
Allow for connection fee for water supply Rate to be

included for breaking the road surface & reinstate
temporary after laying the line as directed.
Pro.sum
Q.19
Allow for new connection for water.
Pro.sum.
Q.20
Allow for water Pressure testing for PVC pipes.
No.
Q.13

BILL NO.S
ELECTRICITY
Note:
All electrical constructions should be according
to IEE regulations (17th edition or later) and
subject to the instructions of the electrical officer
concerned. Jobs attend beyond condition will not
be approved please.
All switches & socket outlets shall be plated type
"Clipsal","Orange" or Cabtree
(make:-"Atco","BG" original or equivalent) starter
and the tube should be Thron, Philips or Osram.
All Ceiling should be KDK,National Mitsubishi,
Hittachi(original Japan) with guarantee card from
the authorized dealer.
All Distribution Boadrs should be incorporated
with genuine Merlin Gerin, A.B.B., Hager,F & G,
Clipsal make MCB's (Miniature Circuit Breakers)
and Cabtree,F & G, Clipsal ,Merlin Gerin make
RCD's (Residual Current Devices) and
Terrasaki,Merlin Gerin, Dormans Smith,Biticano,
Clockner moeller make MCCB's (Moulded Case
Circuit Breakers). A certificate or invoice along
with their Company seal and part No./Numbers
should be produced at the time of payment.
Page 11
Item
Rate
Rs.
Item
Description
Qty.
Unit
No.
All CFL bulbs shall be "Energy star 3 " or above,
with minimum 1 year warranty, purchased from
authorised dealer.
Minimum 1 year warranty from the building
handed over date shall be given for all electrical
equipment including fans, light fittings, CFL
bulbs, etc. Warranty cards shall be submitted by
the contractor to the Projects Engineer.
All light fittings shall be approved by the project

architect/ electrical engineer prior to the
installation
GROUND FLOOR
S.1
Supply & install approved surface mounted type three

tube 1200mm -3x36W complete fluorescent lamp
fittings -1200mmx 600mm-with polished aluminium
parabolic mirror reflectors & cross blades as shown in
the electrical layout & complete wiring using round
blocks, ceiling roses,1mm Cu/PVC/PVC cable,
flexible cable, sunk switches, sunk nut boxes and
conduits or plastic casings etc. where necessary.
56
Nrs.
S.2
Supply & install approved type 1200mm, 2x36W

fluorescent tube complete lamp fittings & complete
wiring by using same items as in No.01 above.
09
Nrs.
S.3
Supply & install approved type wall bracket outdoor

weather proof complete lamp fittings with approved
type CFL 20W (cool white) as shown in the Ground
floor electrical layout & complete wiring by using
same items as in No.01 above.
28
Nrs.
S.4
Supply & install approved type wall bracket indoor

complete lamp fittings with approved type CFL 15W
(cool white) & complete wiring using round blocks,
ceiling roses,1mm Cu/PVC/PVC cable, flexible
cable, sunk switches, sunk nut boxes and conduits
or plastic casings etc. where necessary.
04
Nrs.
S.5
Supply & install approved type sweep ceiling fans

with dimmer type regulators with a switch -1400mm
(55") dia. according to the electrical layout &
complete wiring by using the same items as in No. 01
above + 2.5mm Cu/PVC earth cable.
48
Nrs.
S.6
Supply & install approved type 5A sunk plug bases

with switches as shown in electrical layouts &
complete wiring by using 1mm Cu/PVC/PVC cable +
2.5mm Cu/PVC earth cable, sunk nut boxes &
conduits or plastic casing etc. where necessary.
10
Nrs.
Page 12
Rate
Rs.
Item
Description
Qty.
Unit
Supply &install approved type 13A sunk plug bases

(5A fused) with switches & complete wiring with
2.5mm Cu/PVC/PVC cable + 2.5mm Cu/PVC earth
cable, sunk nut boxes & conduits or casing etc. where
necessary in radial circuits.
08
Nrs.
S.8
Supply &install approved type 15A sunk plug bases

with switches & complete wiring by using 2.5mm
Cu/PVC/PVC cable + 2.5mm Cu/PVC earth cable,
sunk nut boxes & conduits or casing etc. where
necessary.
03
Nrs.
S.9
Supply and install an approved wall mounted type

Distribution Board (DB-G) fabricated in zinc coated
sheet not less than 1.5 mm thickness with indicator
lights 03 nos. for three phases, 30A 3P+N bus bars
and all other necessary accesories, surface finish
should be powder coated texured finish R.A.L.7032
consist of following items of approved type at the
ground floor.
01
Nr.
02
Nrs.
10
No.
S.7
32A 4P MCCB (25kA) 01 Nr.

20A 4P MCB 01 Nr.(for upper floor)
40A (30mA) 2P RCD 01Nr.
20A 2P MCB 02 Nrs.
16A 1P MCB 01 Nr.
10A 1P MCB 03 Nrs.
6A 1P MCB 05 Nrs.
S.10
Supply and install approved ABC type wall mounted

type Distribution Boards (SDB-G1 and SDB-G2)
consist of following of approved types.
20A 2P MCB 01 Nr.
40A (30mA) 2P RCD 01 Nr.
16A 1P MCB 01 Nr.
10A 1P MCB 03 Nrs.
6A 1P MCB 05 Nrs.
S.11
Supply and install 4x10mm Cu/PVC/PVC cable as

the load wire with all necessary accesories.
Page 13
Rate
Rs.
Item
Description
Qty.
Unit
Supply and install 2x6mm Cu/PVC/PVC cable as the

load wire for SDB-G1 and SDB-G2 with all necessary
accesories.
120
S.13
Supply and install an earthing system with 50mm dia.

GI pipe of length 1800mm earth electrodes. Each
electrode underground should be covered by a gully
of 1'x1' and shall be available for visual inspection.
Number of rods required to obtain the necessary
resistance shall be determined by the contractor. All
metal parts of the building shall also be
earthed.Testing of earth resistance after installation
shall be done by the contractor in the presence of the
project Electrical Engineer/Technical officer. All costs
for testing shall be borne by the contractor.
Item
S.14
Supply and install 6mm2 Cu/PVC earth cable in

conduits, from the earth point to the distribution board
and from DB-G to SDB-G1 and SDB-G2. Cost shall
include all necessary accessories and materials
including excavation and backfilling.
25
S.15
30A three phase underground power connection from

CEB. Cost shall include all associated costs including
expenditure to obtain necessary reports from a
chartered electrical Engineer.
No.
S.12
Pro.Sum
UPPER FLOOR
S.16
Supply & install approved type wall bracket indoor

complete lamp fittings with approved type CFL 15W
(cool white) & complete wiring using round blocks,
ceiling roses,1mm Cu/PVC/PVC cable, flexible
cable, sunk switches, sunk nut boxes and conduits
or plastic casings etc. where necessary.
19
Nrs.
S.17
Supply & install approved type low bay (18" dia)

complete lamp fittings outside plated in black with
approved type CFL 26W (cool white) & complete
wiring by using same items as in No.01 above.
42
Nrs.
S.18
Supply and install an approved wall mounted type

Distribution Board (DB-U) fabricated in zinc coated
sheet not less than 1.5 mm thickness with indicator
lights 03 nos. for three phases, 30A 3P+N bus bars
and all other necessary accesories, surface finish
should be powder coated texured finish R.A.L.7032
consist of following items of approved type at the
upper floor.
01
Nr.
40A 4P Isolator 01 Nr.

40A (30mA) 2P RCD 02 Nrs.
20A 2P MCB 02 Nrs.
Page 14
Rate
Rs.
Item
Description
Qty.
Unit
Supply and install approved ABC type wall mounted

type Distribution Board (SDB-U1) consist of following
of approved types.
01
Nr.
No.
6A 1P MCB 10 Nrs.
S.19
20A 2P MCB 01 Nr.

40A (30mA) 2P RCD 01 Nr.
6A 1P MCB 05 Nrs.
Space for 1P MCB 02 Nrs.
S.20

load wire for SDB-U1 with all necessary accesories.
60
S.21

load wire for DB-U with all necessary accesories.
10
S.22
Supply and install 6mm2 Cu/PVC earth cable in

conduits, from the MDB to the DB-U with all
necessary accesories.
70

BILL NO: T
FLOOR/ WALL AND CEILING FINISHES
T1 - FLOOR FINISHES
Rendering 20mm thick in cement and sand 1:2 in
floors cut finish with neat cement slurry in
following items.
T.1.1
In ground floor,tiers and steps ect.
1100.00
T.1.2
In upper floor with tiers
590.00
T.1.3
In stair ways
50.00
T.1.4
Supplying and laying 300mmx300mm nonslip floor

tiles bedded in cement and sand mortar 1:3 . Rate to
be included the cost of 1:3 mortar levelling bed as per
drawing in ground floor toilet.
180.00
T.1.5
Supplying and laying 200mmx200mm nonslip floor

tiles bedded in cement and sand mortar 1:3 . Rate to
be included the cost of 1:3 mortar levelling bed as per
drawing in ground floor toilet.
25.00
Page 15
Rate
Rs.
Item
Description
Qty.
Unit
No.
Skirting 100mm x 12mm thick in cement and sand
1:3 projected or flush to walls finished with
colour pigment neat cement including forming
groove for the following item
T.1.6
In ground floor
T.1.7
In stairway
T.1.8
In upper floor
T.1.9
Polished Granite 20mm thick absolutely black for

vanity top approved quality , laid on 12mm thick
cement sand 1:3 screed level off using cement slurry
and 1mm joints to be absolutely in line and flush and
grout.
180.00
40.00
225.00
12.00
T2 - WALL AND CEILING FINISHES

T.2.1
300mm x 200mm approved quality polished glazed

wall tilling on plastered surface of walls joints finished
with coloured grout to match with colour of tiles in
ground floor toilet . Wall plaster measured seperately.
365.00
T.2.2
16mm thick plastering to plinth with cement & sand

mortar 1:3 and floated with cement.
100.00
T.2.3
12mm thick plastering to internal walls with cement

and sand mortar 1:3 to a rough finish (screed backing
to receive wall tiles) in ground floor( toilet).
365.00
16mm thick external wall and column plastering

with lime, cement and sand mortar 1:5 to a semi
rough finish for the following items.
T.2.4
In ground floor Up to3.6m
600.00
T.2.5
In ground floor from 3.6m to 8.6m
475.00
T.2.6
In upper floor
900.00
T.2.7
In isolated column
175.00
T.2.8
Reveals (width n.e 300mm) in ground floor
215.00
16mm thick internal plastering in walls and

columns with cement and sand mortar I:5 finish
semi rough for the following items.
T.2.9
In ground floor up to 3.6m
1,700.00
T.2.10
In ground floor over 3.6m
450.00
T.2.11
In upper floor
900.00
Page 16
Rate
Rs.
Item
Description
Qty.
Unit
No.
T.2.12
In isolated column
275.00
T.2.13
Reveals (width n.e 300mm) in ground floor
195.00
T.2.14
10mm thick plastering with cement & sand mortar

1:3 finished with lime putty in soffit of stair ways.
22.00

BILL NO V
PAINTING
Application of plaster coatings of thickness not
less than 2mm using "Joint compound powder /
Skimcoat ", or approved equivalent to walls, slab,
beam, column facings.Rate shall include for sand
papering and surface preparation in following
items.
V.1
In ground floor walls , columns up to 3.6m
1715.00
V.2
In ground floor walls , columns over 3.6m
450.00
V.3
In upper floor walls , columns
900.00
V.4
In ground floor isolated column
175.00
V.5
In upper floor isolated column
275.00
V.6
Soffit of
floor slab ans tiers, sides and soffit of
beams, stair case in ground floor
1625.00
Colour washing to internal walls with one coat of

primer and two coats of approved quality and
colour emulsion paint for the following items
Including preparation of surfaces.
V.7
1,715.00
V.8
450.00
V.9
900.00
V.10
In ground floor isolated column
175.00
V.11
In upper floor isolated column
275.00
V.12
Soffit of
floor slab ans tiers, sides and soffit of
beams, stair case in ground floor
1,625.00
Page 17
Rate
Rs.
Item
Description
Qty.
Unit
No.
Colour washing to external walls with two coats
of approved quality and colour weathershield
paint after applying one coat of primer for the
following items Including preparation of surfaces.
V.13
615.00
V.14
475.00
V.15
900.00

BILL NO W
DRAINAGE SYSTEMS
Note:
1.The work should be carried out by a contractor
licensed by the CMC and in accordance with the
regulations of the CMC for soil drainage.
2. Backfilling of excavations in trenches and pits
for drains and manholes must be compacted and
excess to be disposed as directed at expenses of
the contractor. Rate to be included for
dewatering, pumping,shoring and cleaning the
site on completion.
3.The gauge of pipes to be 600 UPVC.
4. Rates shall be inclusive of bends, valves,
reduces joints,end caps etc. necessary for the
installation of service.
W.1
Supply & fix/lay 40 mm dia. PVC Type 600 waste

pipes. (approx.)
55.00
W.2
Supply & fix/lay 50 mm dia. PVC Type 600 waste

pipes. (approx.)
70.00
W.3
Supply & fix/lay 110mm dia. PVC sewer/strom water

pipes.
60.00
W.4
Construction of gully internal size of 300mm x300mm

& depth up to 450mm as per detail drawing. Rate to
include for excavation, necessary formwork, lifting
hooks, supplying P.V.C.gully trap in fill with grade 20
concrete and 20mm thick cement & sand rendering in
1:2 mix trowel smooth with neat grey cement to all
internal surfaces , exposed external surfaces and
forming channel with 1:6 benching. Including 75mm
thick RCC cover slab reinforced wth 6mm dia mild
steel at 100mm c/c both ways.
Page 18
06
Nr.
Rate
Rs.
Item
Description
Qty.
Unit
Construction of RCC sewer manhole internal size of

600mmX450 mm & depth< 1000mm as per detail
drawing. Rate to include for excavation, necessary
formwork, lifting hooks and 20mm thick cement, sand
rendering in 1:2 mix 2% approved water proofing
compound, trowel smooth with neat grey cement to
all internal surfaces, exposed external surfaces and
forming channel with 1:6 benching. Including 75mm
thick RCC cover slab reinforced wth 10mm dia tor
steel at 150mm c/c both ways.
08
Nr.
W.6
Construction of strom water brick manhole internal

size of 300mm x 300mm & depth upto 375mm,
consist of 75mm thick Grade 15 concrete base and
112mm thick brick masonry side walls in 1:3 cement
sand mix , 1/2" thick cement rendering in 1:2 to
internal & external exposed faces of walls finished
smooth with neat cement floating, with 50mm thick
Grade 20 RCC cover slab with 6mm dia. M.S. rods @
100mm c/c both ways. Rate to include for excavation,
necessary formwork , lifting hooks & 75mm thick
concrete pad.
01
Nr.
W.7
Supply and fix PVC Catch pit floor trap of size

100mm dia. Internal including PVC grating embedded
in the floor.
18
Nr.
W.8
Allow for connecting storm water drain to existing

CMC drain.
No.
W.5
Page 19
item
Rate
Rs.
Item
Description
Qty.
No.
Page 20
Unit
Rate
Rs.
Amount
Rs.
Page 21
Amount
Rs.
Page 22
Amount
Rs.
Page 23
Amount
Rs.
Page 24
Amount
Rs.
Page 25
Amount
Rs.
Page 26
Amount
Rs.
Page 27
Amount
Rs.
Page 28
Amount
Rs.
Page 29
Amount
Rs.
Page 30
Amount
Rs.
35,000.00
60,000.00
10,000.00
Page 31
Amount
Rs.
Page 32
Amount
Rs.
Page 33
Amount
Rs.
300,000.00
Page 34
Amount
Rs.
Page 35
Amount
Rs.
Page 36
Amount
Rs.
Page 37
Amount
Rs.
Page 38
Amount
Rs.
Page 39
Amount
Rs.
Page 40
SUMMARY
BILL NO
DESCRIPTION
BILL NO.01
PRELIMINARIES
BILL NO. C
DEMOLITION
BILL NO. D
BILL NO. F
CONCRETE WORK
BILL NO. G
MASONRY WORKS
BILL NO. H
WATER PROOFING
BILL NO. K
METAL WORK
BILL NO. L
WOOD WORK
BILL NO. P
BILL NO. Q
BILL NO. S
ELECTRICAL INSTALLATION
BILL NO. T
FLOOR/WALL AND CEILING FINISHES
BILL NO. V
PAINTING
BILL NO. W
DRAINAGE SYSTEMS
SUB TOTAL
ADD 10% CONTINGENCIES
TENDER PRICE (BID PRICE)
ADD 11% VAT
FINAL COST (WITH TAXES)
lal/2015/ cooray playground
AMOUNT
RS.
SUMMARY
BILL NO
DESCRIPTION
BILL NO.01
PRELIMINARIES
BILL NO. C
DEMOLITION
BILL NO. D
BILL NO. F
CONCRETE WORK
BILL NO. G
MASONRY WORKS
BILL NO. H
WATER PROOFING
BILL NO. K
METAL WORK
BILL NO. L
WOOD WORK
BILL NO. P
BILL NO. Q
BILL NO. S
ELECTRICAL INSTALLATION
BILL NO. T
FLOOR/WALL AND CEILING FINISHES
BILL NO. V
PAINTING
BILL NO. W
DRAINAGE SYSTEMS
SUB TOTAL
ADD 10% CONTINGENCIES
TENDER PRICE (BID PRICE)
ADD 11% VAT
FINAL COST (WITH TAXES)
SIGNATURE OF TENDERER ..
DATE:
AMOUNT
RS.

Building Boq Sample

Uploaded by

Copyright:

Available Formats

Building Boq Sample

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Building Boq Sample

Uploaded by

Copyright:

Available Formats

What are the different sections covered in the document?

What are the different sections covered in the document?

What are the different types of concrete work mentioned?

What are the different types of concrete work mentioned?

Item

Allow for disconnection or plugging water, sewer

Purchesing of reusable items by the contractor.

Allow for removing two existing buildings size

Total carried over to summary

Excavation for column footings

Excavation for wall foundations, depth n.e 1.0m

Filling under floor ,earth of approved quality cleaned,

proposed pavilion at cooray play ground final

In 50mm thick under walls foundations

In 50mm thick under column footings

In 75mm thick floor.

Concrete mixture for the following items will be

In column, from F.F.L to 3.6m level

In column above pavilion floor

In upper floor beams

proposed pavilion at cooray play ground final

level to pavilion floor level

Cement concrete grade 20 (20mm aggregate) for

In ground floor lintols

In 600mm wide 75mm thick vanity top

In sides of column bases

In sides of columns up to F.F.L

In sides of columns from F.F.L to 3.6m level

In sides of columns from 3.6m level to pavilion floor

In sides of column pavilion floor level

In side and soffit of plinth beams

In sides and soffit of intermeddiate beams.

In sides and soffit of roof beams

In sides and soffit of pavilion floor slab and tiers

In sides and soffits of upper floor beams

In sides and soffits of lintols in ground floor

In sides and soffits of staircase

In sides and soffits of vanity top

F3 - REINFORCEMENT IN INSITU CONCRETE

proposed pavilion at cooray play ground final

In Columns from F.F.L to 3.6m level

In columns from 3.6m to pavilion floor level

In column from pavilion floor level to roof level

High-yield tor steel bars diameter n.e. 10mm for

In lintols in ground floor

High-yield tor steel bars diameter 10-16mm for the

In columns from F.F.L to 3.6m level

In columns from 3.6m to pavilion floor level

proposed pavilion at cooray play ground final

In columns above pavilion floor level

High-yield tor steel bars diameter above 16mm for

In columns from F.F.L to 3.6m level

In columns from 3.6m to pavilion floor level

In columns above pavilion floor level

Total carried over to summary

In ground floor Up to3.687m

In ground floor from 3.687m to 8.637m

112.5mm thick brick work in cement and sand

Random rubble masonry in cement & sand mortar 1:5