Slickline Downhole Basic Tools Data Sheets

Slickline Services
DATA DHT-01.00

Table of Contents
Slickline Downhole Basic Tools Data Sheets ............................................................. 1

Rope Socket Pear Drop Type........................................................................................................................3

Wireline Stem Weight Bars...........................................................................................................................4
Wireline Knuckle Joint...................................................................................................................................5
Wireline Swivel Joint......................................................................................................................................6
Wireline Adapters...........................................................................................................................................7
Wireline Link Jar Spang.............................................................................................................................8
Wireline Tube Jar...........................................................................................................................................9
Wireline Hydraulic Jar.................................................................................................................................10
Wireline Spring Jar......................................................................................................................................11

Gauge Cutters..............................................................................................................................................12
Blind Box.......................................................................................................................................................13
Impression Block.........................................................................................................................................14
Wireline Magnet...........................................................................................................................................15
Fluted Centralizer........................................................................................................................................16
GR Adapter...................................................................................................................................................17
GS Pulling Tool............................................................................................................................................18
JU Running/Pulling Tool.............................................................................................................................19
JD Running/Pulling tool..............................................................................................................................20
R Running/ Pulling Tool..........................................................................................................................21
S Running/ Pulling Tool...........................................................................................................................22
X Running Tool............................................................................................................................................23
B Shifting Tool.............................................................................................................................................24
Sand Pump Bailer........................................................................................................................................25
Sample Bailer...............................................................................................................................................26
Hydrostatic Bailer........................................................................................................................................27
Wireline Cutter.............................................................................................................................................28
GO Devil........................................................................................................................................................29
Solid Wire Finder.........................................................................................................................................30
Wire Grab.....................................................................................................................................................31
Shock Absorber............................................................................................................................................32
Spring Centralizer........................................................................................................................................33
Scratcher/Brush...........................................................................................................................................34
Slickline Services
DATA DHT-01.00

Rope Socket Pear Drop Type

The Pear Drop Rope Sockets are used to attach

wireline to the tool string and are predominately
used with wireline sizes from 0.092 to 0.160
dependent on size.

The Rope Socket assembly consists of a body with

an external fishing neck, sleeve and a brass wedge
(pear drop) which is grooved to accommodate the
wire and comes complete with a securing grub
screw
Applications
Used as a method of connecting the Slickline to
the tool string, from wire sizes from 0.108 up to
0.160
Features
Assembly consists of a body with external fishing
neck, sleeve and brass wedge (pear drop)
The pear drop is grooved to accommodate the
wire and comes complete with a securing grub
screw
The more pull applied on the Slickline, the more
the pear drop pulls into the sleeve giving a tighter
grip on the Slickline
Benefits
Pear drop sockets are ordered to suit the wire size
being deployed
Simple, low maintenance design

Size (in.)
1-1/2
1-7/8
1-7/8
2-1/8
2-1/2

Max. OD (in.)
1.500
1.875
1.875
2.125
2.500

Rope socket

F/N OD (in.)
1.375
1.750
1.750
1.750
2.312

Thread Conn. Box (in. TPI)

1-1/16 - 10 UN
15/16 - 10 UN
1-1/16 - 10 UN
1-1/16 - 10 UN
1-9/16 - 10 UN

Wire size (in.)

0.092 / 0.108
0.092 / 0.125
0.092 / 0.125
0.092 / 0.125
0.092 / 0.125

Slickline Services
DATA DHT-01.00

Wireline Stem Weight Bars

The Wireline Stem/Weight Bars, sometimes referred
to as sinker bars, are designed to serve two
purposes.

Firstly they are the weight required to overcome

forces created by well pressure and the size of cable
used and secondly they are the mass required to
deliver impacts when setting or pulling devices in
the wellbore
Applications
As with the conventional stem, however Lead
Filled stem is heavier per ft. giving increased tool
string weight when required without increasing
length or OD
Features
Provides the weight required to overcome forces
created by well pressure and the size of the cable
Creates the mass required to deliver impacts
when setting or pulling devices in the wellbore
Supplied with standard pin and box connections
complete with fishing necks
Benefits
Available in various diameter and lengths
Overcomes well pressures

Wireline Stems
Size (Inch)

Max. OD (inch)

F/N OD (inch)

Thread Connection

1-1/2
1-7/8
2-1/8
2-1/2

1.500
1.875
2.125
2.500

1.375
1.750
1.750
2.312

15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Wireline Knuckle Joint

The Knuckle Joint is designed to provide flexibility

within the wireline tool string. One or more Knuckle
Joints can be inserted into the tool string at the
operators discretion, to meet operational
requirements
Applications
Knuckle Joints are used to add flexibility within the
tool string and are particularly effective within
deviated well bores
Features
Can be inserted into the tool string at operators
discretion
Works most effectively when situated below the
jar to provide angular movement between the tool
string and the running/pulling tool
Available in various diameters
Benefits
Provides flexibility within the wireline tool string
Meets operational requirements

Size (inch)
1-1/8
1-1/4
1-1/2
1-7/8
2-1/8
2-1/2

Wireline Knuckle Joints

Max. OD (inch)
F/N OD (inch)
1.125
1.250
1.500
1.875
2.125
2.500

0.875
1.187
1.375
1.750
1.750
2.312

Thread Connection
Pin X Box (in. TPI)
5/8-11 UNC
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Wireline Swivel Joint

The Swivel Joint is a wireline accessory used to

minimize the effect of line twist caused by
subsurface devices being run. The Swivel Joint has
a bearing incorporated into its design and is used
to minimize rotation whilst running tubing or casing
caliper surveys.
The Swivel Joint has a double fish neck feature and
standard pin and box threads.
Applications
The swivel joint is a tool string accessory that is
incorporated to minimize the effect of any potential
wire twist caused by downhole conditions or devices
being run. The Swivel is commonly run when
running braided cable
Features
Ensures free rotation of downhole tool string
assemblies
Capable of withstanding high impact forces
Suitable for use with the latest generation of high
impact jars
Reduces the build of torque in the tool strong
Benefits

Free rotation even when the tool string is held in

significant tension
Minimizing the buildup of torque reduces
potential damage being cause to the wireline stand

Swivel Joints
Size (inch)
1.500
1.875
2.500

F/N OD (inch)
1.375
1.750
2.313

Connection Thread (inch TPI)

15/16-10 UN
1-1/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Wireline Adapters
The Wireline Crossover are used to connect two tool
string items with different threads.
Quick Lock Connection provide a fast safe and strong
method of attaching and releasing tools by hand. The
male half is mated with the female half, then rotated
through 90 deg. Whereon a spring loaded spade in
the female section engages a slot in the male
section and locks the assembly in place. It is released
by pushing upon the spring and rotating again through
90 deg.

Applications
Wireline crossovers are used to connect two tool
string items with different threads and sizes
Lift subs are used to make up the tool string in a safe
manner

Features
All crossovers are supplied with a fishing neck
Can supply the following variations pin to box, pin
to pin or box to box

Benefits

Flexible
Crossovers
Max. OD (inch)

F/N OD(inch)

1.750
2.312
2.312
2.312
1.750
2.312

1.750
1.750
2.312
2.312
1.750
2.312

Thread Conn. Pin (in. TPI)

1-1/16-10
1-1/16-10
1-1/16-10
1-1/16-10
1-3/16-10
1-3/16-10

Thread Conn. Box (in. TPI)

UN
UN
UN
UN
UN
UN

15/16-10 UN
15/16-10 UN
1-3/16-10 UN
1-9/16-10 UN
15/16-10 UN
1-9/16-10 UN

Sucker Rod Threads & Quick Lock Connections

Thread / QLS Yield Strength

Design Tensile* Strength

Design Shear* Strength

Ultimate

15/16-10 SRT
1-1/16-10 SRT
1-1/2 QLS
1-7/8 QLS & 2-1/8 QLS

47584 lbs.
63910 lbs.
51128 lbs.
77605 lbs.

68475 lbs.
79888 lbs.
60258 lbs.
74409 lbs.

72966 lbs.
96600 lbs.
77700 lbs.
119000 lbs.

Slickline Services
DATA DHT-01.00

Wireline Link Jar Spang

The Wireline Link Jars, often referred to as spang
jars or mechanical jars, are designed to act like a
sliding hammer, utilizing the weight of the stem bars
located immediately above, to convey powerful
jarring impacts.
Upward and downward impacts (jarring actions) are
achieved by controlling the direction and speed of
the wireline at surface.
Applications
Spang Jars or Mechanical Jars are used in both
standard intervention operations and can be used in
fishing operations. The jars, combined with the
added weight of the stem, give a high impact force
downhole when setting or pulling flow control
devices. The operator can manipulate the jars using
the directional control lever in the Wireline unit
Features
Designed to act like a sliding hammer by utilizing
the weight of the steam bars to convey a powerful
jarring action
Jarring actions are controlled by the direction and
speed of the wireline at surface
Available in various diameters and stroke lengths

Benefits
Controlled jarring actions

Wireline Link Jars

Size (inch)
1
1-1/4
1-1/2
1-1/2
1-7/8
1-7/8
2-1/8
2-1/2

Max. OD (inch)
1.000
1.250
1.500
1.500
1.875
1.875
2.125
2.500

F/N OD (inch)
0.875
1.187
1.375
1.375
1.750
1.750
1.750
2.312

Thread Conn. Pin X Box (in. TPI)

5/8-11 UNC
15/16-10 UN
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-9/16-10 UN

Stroke
20
30
20
30
20
30
30
24

Slickline Services
DATA DHT-01.00

Wireline Tube Jar

The Tubular Wireline Jars are designed to act like a
siding hammer, utilizing the weight of the stem bars
located immediately above, to convey powerful
jarring impacts.
Upward and downward impacts (jarring actions) are
achieved by controlling the direction and speed of
the wireline at surface
Applications
Tubular Jars are most commonly used during
fishing operations where the possibility of Wire or
other debris could impede the jar action of
conventional mechanical jars. As the Tubular jar
action is contained within an outer housing, there is
less chance of losing jarring action whilst downhole
Features
Used effectively during fishing operations when the
jarring action could be impeded by wire, debris etc.
Used effectively when the tool string is being
deployed during large tubing and casing
Available in various diameters and stroke lengths
Benefits
The jarring action is contained within an outer
body allowing its effective use in wellbores that may
contain debris

Wireline Tubular Jars

Size (inch)

Max. OD (inch)

F/N OD (inch)

1-1/4
1-1/2
1-1/2
1-7/8
1-7/8
2-1/8
2-1/8

1.250
1.500
1.500
1.875
1.875
2.125
2.125

1.187
1.375
1.375
1.750
1.750
1.750
1.750

Thread Conn. Pin X Box (in. TPI)

15/16-10 UN
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

Stroke
30
20
30
20
30
20
30

Slickline Services
DATA DHT-01.00

Wireline Hydraulic Jar

The Wireline Hydraulic Jar are used for jarring when
difficulty is face to obtain good jarring action
with Mechanical Jars, particularly due to
deviated wells or wells with highly viscous fluids.
These jars provide only up stroke and are run
between stem and Mechanical Jar.
Applications
Hydraulic Jars are used for jarring when difficulty
is faced when attempting to obtain a good jar action
with mechanical jars, particularly when in deviated
wells or wells that contain highly viscous fluids.
Hydraulic jars only provide an upwards jarring stroke
and are run above the mechanical jars and below
the stem
Features
Delivers a controlled upward impact load during
wireline operations
The closed hydraulic system makes it possible for
the jarring action to be controlled
Available in various diameters and supplied with
standard pin by box connections complete with
fishing necks
Benefits
Controls the jarring action from very light impact
to substantial force

Wireline Hydraulic Jars

Size (inch)

Max. OD (inch)

F/N OD (inch)

Thread Conn. Pin X Box (in. TPI)

Stroke

1-1/8
1-1/4
1-1/2
1-3/4
2-1/8

1.125
1.250
1.500
1.750
2.125

0.875
1.187
1.375
1.375
1.750

5/8-11 UNC
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-3/16-10 UN

6.750
9.250
9.187
10.000
11.625

Slickline Services
DATA DHT-01.00

Wireline Spring Jar

The Spring Jar is designed to impact a very high
impact load to a tool string without excessive jarring
action, With a reasonably short tool string, an
upward pull on the wireline compresses the jar
spring until such time as the inner ring has moved
up enough to allow the balls to move in from the
external ring allowing the jar to fire.
Applications
Spring Jars provide an upward jarring action and
are commonly run with mechanical jars on either
standard intervention operations, or fishing
operations. Spring jars are run above the mechanical
jars and below the stem
Features
Design to impact a tool string with a greater load
without excessive jarring actions
Benefits
Reduces excessive jarring actions

Wireline Spring Jars

Size (inch)

Max. OD (inch)

F/N OD (inch)

Thread Conn. Pin X Box (in. TPI)

Setting

1-3/4
2-1/8

1.750
2.125

1.375
1.750

1-1/16-10 UN
1-3/16-10 UN

400-700
400-700

Slickline Services
DATA DHT-01.00

Gauge Cutters
The Gauge Cutter are run in hole before running sub
surface equipment. Gauge/Paraffin Cutters are used
to check if sub surface equipment can pass freely
thru tubing & there are no obstructions and to locate
top of nipple. The bottom of Gauge/Paraffin Cutter is
suitable to cut paraffin, scale and any other obstacles
in tubing.

Applications
Gauge Cutters are run in hole before running sub
surface equipment
Gauge Cutters are used to check if sub
surface equipment can pass freely thru tubing &
there are no obstructions and to locate top of nipple
The bottom of Gauge Cutter is suitable to cut
paraffin, scale and any other obstacles in tubing.
Features
Short bar with a machined bore extending up the
center
Elongated windows for fluid by pass
Upset gauge ring on the bottom is sized for
application
Large bevel cut to provide a scraping edge
Industry standard thread connection complete with
finishing neck
Benefits

Gauge and scrape clean paraffin, wax and other

debris from inside the wall of the completion tubing
string
Ensures there is no impeding matter before running

Tubing Gauge / Paraffin Cutters

OD Range (inch)*

F/N OD (inch)

Thread Connection Pin (in. TPI)

0.905 1.575
1.655 2.265
2.323 2.520
2.598 2.953
2.992 3.900
5.750 6.151

0.875
1.375
1.375
1.750
2.312
2.312

5/8-11 UNC
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Blind Box
The Blind Box are used when heavy downward
jarring is required to dislodge a fish or push
something down the hole. Bottom surface of Blind
Box is flat and hardened to reduce wear and
damage.
Applications
Blind Boxes are used when heavy downward
jarring is required to dislodge a fish or push
something down the hole
The Bottom surface of Blind Box is flat and
hardened to reduce wear and damage
Features
Solid bar with a flat hardened bottom end and a
standard thread connection with fishing neck on top
Benefits
Jars an obstruction downward through the tubing
strong to a position which cause the least
inconvenience
Breaking the wireline at the rope socket, allowing
the wire to be retrieved

Blind Boxes
OD Range (inch)*

F/N OD (inch)

1.187 1.250
1.625 1.375
2.625 2.750
3.500 4.625
5.250 5.750

1.187
1.375
1.750
2.312
2.312

Thread Connection Pin (in. TPI)

15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-9/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Impression Block
The Impression Block are used during fishing
operations to check the shape / size of the top of
fish and to determine tool appropriate for fishing
operation. Lead is filled within body of Impression
Block and a pin is fixed thru body of Impression
Block and lead to stabilize lead within body.
Applications
Impression Blocks are used during fishing
operations to check the shape / size of the top of
fish and to determine the appropriate tool for the
fishing operation. Lead is filled within body of
Impression
Block and a pin is fixed thru body of Impression
Block and lead to stabilize lead within body
Features
Steel Cylinder with an open bottom end filled with
soft lead
Top end has an industry standard thread
connection complete with fishing neck
Available in various diameters
Benefits
Allows the operator to take an impression of
unknown objects in the tubing string
This impression helps the operator select the tool
for the next operation

Impression Blocks
OD Range (inch)*
1.000 1.230
1.375 1.410
1.750 2.250
2.625 2.812
3.500 4.625
5.500 5.750

F/N OD (inch)
0.875
1.187
1.375
1.750
2.312
2.312

Thread Connection Pin (in. TPI)

5/8-11 UNC
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-9/16-10 UN
1-9/16-10 UN

Slickline Services
DATA DHT-01.00

Wireline Magnet
The Skirted Magnet is designed to retrieve ferrous
debris from the top of tools in the well. The Skirted
Magnet consists of a top sub body complete with
fishing neck and pin connection, magnet and skirt.
Applications
The skirted and bar fishing magnets are used to
retrieve any ferrous debris that may be obstructing
complete entry into the wellbore, or hindering the
retrieval of a sub-surface device
Features
Skirt is manufactured from nonmagnetic material
Prevents debris being dislodged during retrieval
Prevent hindrance during running and pulling by
keeping the magnet of the tubing wall
Benefits
Retrieves debris from the top of the tools in the
well

Size OD (inch)
1.50
1.75
2.25
2.65
3.65

Wireline Fishing Magnet

F/N OD (inch)
Thread Connection Pin (in. TPI)
1.375
1.375
1.375
1.375
1.750

15/16-10 UN
15/16-10 UN
15/16-10 UN
15/16-10 UN
1-1/16-10 UN

To pull (lbs.)
11 14
15 20
25 50
50 75
150 250

Slickline Services
DATA DHT-01.00

Fluted Centralizer
The Fluted Centralizer is designed to centralize
wireline tool strings inside the tubing, during
operations in deviated wells.
Applications
The Fluted Centralizer is used to centralize the tool
string when in the wellbore.
As it is fluted, a full bore centralizer can be run as
fluid bypass is achieved by the flutes.
Can be used as a drift if required
Features
Centralizes the wireline tool strings inside the
tubing
Available in various diameters and supplied with
industry standard connections complete with fishing
neck
Benefits
Full bore Centralizers can be run in fluid as bypass
is achieved by the flutes

Size(inch)
1-1/2
2-1/2
3-1/2
6

Max. OD (inch)
1.50
2.50
3.50
6.00

Fluted Centralizers
F/N OD (inch)
Thread Connection Pin X Box (in. TPI)
1.187
15/16-10 UN
1-1/16-10
UN
1.750
1-1/16-10
UN
2.312
1-9/16-10 UN
2.312

Slickline Services
DATA DHT-01.00

GR Adapter
The Shear Up Adapter GS Pulling Tools are used to
unlock and pull various down hole equipment
with Internal Fishing Necks. These tools are
designed to shear with Jar Down action. With
addition of GU Adapter, complete assembly is
changed to GR Shear Up Tool.
Applications
The Shear Up Adaptor is used to convert a
standard GS pulling tool from a jar down to release
toll, into a jar up to release tool.
The Shear pin in the GS must be removed once
the GU Adaptor is installed
Features
Fitted with industry standard connections and
fishing necks
Internal Sucker Rod connection to allow
installation on to a GS Pulling tool
Benefits
Available to suit as GS Pulling Tools

Size
1-1/2
2
2-1/2
3, 3-1/2, 4

Shear Up Adapter GU
Actual OD (inch)
F/N OD (inch)
1.470
1.812
2.250
2.718

1.187
1.375
1.750
2.312

Thread Connection
15/16-10
15/16-10
15/16-10
1-1/16-10

Slickline Services
DATA DHT-01.00

GS Pulling Tool
The Pulling Tool Type GS Pulling Tools are used to
unlock and pull various down hole equipment
with Internal Fishing Necks. These tools are
designed to shear with Jar Down action. With
addition of GU Adapter, complete assembly is
changed to GR Shear Up Tool.
Applications
The GS Pulling tool is used to engage and pull sub
surface flow control devices that are fitted with an
Internal Fishing Neck
Features
Fitted with industry standard connections and fish
necks
Jar down to release functionality
Can be converted to a jar up to release tool by
installing a GU Shear Up Adaptor
Benefits
Larger sizes GS are fitted with a pinning ring for
ease of pinning

Size
1-1/2 1-3/4
2
2-1/2
3
3-1/2
4
5
7

Prong
1/2-13
1/2-13
5/8-11
5/8-11
1-3/8-12
2-1/8-12
2-1/2-10
3-5/8-10

F/N ID
1.060
1.380
1.810
2.310
2.620
3.120
4.000
5.250

GS Pulling Tools
GS
1.470
1.750
2.160
2.720
3.110
3.620
4.500
5.880

F/N OD
1.187
1.375
1.750
2.312
2.312
2.312
3.125
3.125

Top
15/16-10
15/16-10
15/16-10
1-1/16-10
1-1/16-10
1-1/16-10
1-1/16-10
1-1/16-10

Reach
1.62
1.62
1.62
1.62
1.62
1.62
1.82
1.86

Slickline Services
DATA DHT-01.00

JU Running/Pulling Tool
The JU Series Pulling Tool is designed to engage
external fishing necks on Sub-surface devices
within the well-bore
The Pulling Tool Type JU (Jar Up) Pulling Tools are
used to shear and release tools and are available
with C, S Core options. The cores of JU & JD are
same.
Applications
The JU Series Pulling tool is used to latch and pull
any subsurface device that is fitted with an external
fishing neck
Jar up to release functionality
Features
Available with 3 different core lengths:
C being a long core with a short reach
S being an intermediate core with a medium
reach
L being a short core with a long reach
Supplied with industry standard connections and
fishing necks
Benefits
Different core lengths give the operator flexibility
to use one tool for various different applications

JU Pulling Tools, Type JUC

Size
(inch)

Max.
OD(inch)

F/N OD
(inch)

Pulls Neck Connecting Thread Pin Prong Connecting

OD (inch)
Thread Box

Reach (inch)

1-1/4

1.250

1.187

1.937

15/16-10

1/4-20

1.937

1-1/2

1.422

1.187

1.187

15/16-10

1/2-13

1.093
1.437

1.859

1.375

1.375

15/16-10

1/2-13

2-1/2

2.250

1.375

1.750

15/16-10

1/2-13

1.312

2.812

1.750

2.312

15/16-10

5/8-11

1.437

3.750

2.312

3.125

1-1/6-10

1-1/4-12

3.375

Slickline Services
DATA DHT-01.00

JD Running/Pulling tool
The JD Series Pulling Tool is designed to engage
external fishing necks on sub-surface devices within
the well-bore.
Pulling Tool Type JD (Jar down) Pulling Tools are
used to shear and release tools and are available
with C, S Core options. The cores of JU & JD are
same.
Applications
The JD Series Pulling tool is used to latch and pull
any subsurface device that is fitted with an external
fishing neck
Jar down to release functionality
Features
Available with 3 different core lengths:
C being a long core with a short reach
S being an intermediate core with a medium
reach
L being a short core with a long reach
Supplied with industry standard connections and
fishing necks
Benefits
Different core lengths give the operator flexibility
to use one tool for various different applications

JD Pulling Tools, Type JDC

Size
(inch)

Max. OD
(inch)

F/N OD
(inch)

Pulls Neck
OD (inch)

1-1/4
1-3/8
1-1/2
2
2-1/2
3
3
4

1.291
1.375
1.422
1.859
2.250
2.796
2.796
3.750

1.187
1.187
1.187
1.375
1.375
1.750
1.750
2.312

0.875
1.000
1.187
1.375
1.750
2.312
2.312
3.125

Connecting
Thread Pin
15/16-10
15/16-10
15/16-10
15/16-10
15/16-10
15/16-10
15/16-10
1-1/6-10

Prong Connecting
Thread Box

Reach
(inch)

1/4-20
N/A
1/2-13
1/2-13
1/2-13
1/2-13 and 5/8-11
5/8-11
1-1/4-12

1.937
1.875
1.093
1.437
1.312
1.437
0.687
2.312

Slickline Services
DATA DHT-01.00

R Running/ Pulling Tool

The R Pulling Tool is designed to engage external
fishing necks on Sub-surface devices within the wellbore. R pulling tools are available with four different
core lengths, sized to acJD Running/Pulling tool rJD
Running/Pulling tooly standard fishing necks.
R pulling tools are categorized for easy reference;
the first letter designates the direct of shear release,
R being jar up to release. The second letter
designates the effective reach, which depends upon
the core length
Applications
The R Series Pulling tool is used to latch and pull
any subsurface device that is fitted with an external
fishing neck
Jar up to release functionality
Features
Available with 3 different core lengths:
B being a long core with a short reach
S being an intermediate core with a medium
reach
J being a short core with a long reach
Supplied with industry standard connections and
fishing necks
Benefits

Different core lengths give the operator flexibility

to use one tool for various different applications

R Pulling Tools, Type

Size (inch)
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4

Max. OD (inch)

Pulls Neck OD(inch)

Top Thread

Reach (inch)

1.220
1.430
1.484
1.770
2.180
2.740
3.110

F/N OD (inch)
1.000
1.188
1.188
1.375
1.375
2.312
2.312

1.000
1.188
1.188
1.375
1.750
2.312
2.750

5/8-11
15/16-10
15/16-10
15/16-10
15/16-10
1-1/16-10
1-1/16-10

1.219
1.264
1.050
1.219
1.203
1.297
1.350

3.670

2.312

3.125

1-1/16-10

1.490

Slickline Services
DATA DHT-01.00

S Running/ Pulling Tool

The S Pulling Tool is designed to engage external
fishing necks on Sub-surface devices within the wellbore.
S pulling tools are available with three different core
lengths, sized to accommodate the different reach
lengths on industry standard fishing necks.
S pulling tools are categorized for easy reference; the
first letter designates the direct of shear release, S
being jar down to release. The second letter
designates the effective reach, which depends upon
the core length
Applications
The S Series Pulling tool is used to latch and pull
any subsurface device that is fitted with an external
fishing neck
Jar down to release functionality
Features
Available with 3 different core lengths:
B being a long core with a short reach
S being an intermediate core with a medium
reach
M is designed for use in Gas-Lift operations
Fitted with industry standard connections and
fishing necks

Benefits
Different core lengths give the operator flexibility
to use one tool for various different applications

Size (inch)
1-1/4
2-1/2
2-1/2
2
2-1/2
3
3
3-1/2
4

Max. OD (inch)
1.220
1.437
1.437
1.766
2.188
2.734
2.844
3.115
3.670

S Pulling Tools, Type SB

F/N OD (inch)
Pulls Neck OD (inch)
1.000
1.188
1.188
1.375
1.375
2.312
2.312
2.312
2.312

1.000
1.188
1.188
1.375
1.750
2.312
2.312
2.750
2.750

Top Thread

Reach (inch)

5/8-11
15/16-10
15/16-10
15/16-10
15/16-10
1-1/16-10
1-1/16-10
1-1/16-10
1-1/16-10

1.280
0.688
1.297
1.219
1.281
1.380
1.500
1.690
1.500

Slickline Services
DATA DHT-01.00

X Running Tool
The X Running Tool is designed to deploy and set sub
surface flow control devices equipped with X and XN
lock mandrels, landing in corresponding selective or
no-go landing nipples.
Applications
Used to run and set Otis X and XN Lock Mandrels
Features
The tool can be run in either Selective or NonSelective position
Benefits
Fishing neck fitted with industry standard
connections

X Running Tools
Actual OD (inch)
1.720
2.171
2.687
2.843
3.250
3.750
4.500

To suit Nipple Bore

1.875
2.313
2.750
2.875
3.313
3.813
4.562

F/N OD (inch)
1.375
1.750
2.313
2.313
2.313
2.313
3.125

Thread Connection
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

Slickline Services
DATA DHT-01.00

B Shifting Tool
The B Positioning (Shifting) Tool is designed to move
the inner sleeve to their open or closed position in the
type XA, RA, XO and XD Sliding Side-Door circulating
sleeve.
Applications
The B Shifting Tools are designed to shift the XA,
RA, XO and XD Sliding side door sleeves
Features
Designed to release itself only after the sleeve has
reached the full extent of its travel
Supplied with industry standard connections and
fishing necks
Fitted with a shear pin to allow the keys to collapse
should the tool not engage the profile
Benefits
Self release design
Conforms to industry standards

B Shifting Tools

SSD ID (inch)

OD (Keys Retracted) (inch)

F/N OD (inch)

1.875
2.125
2.188
2.313
2.562
2.750
2.813
3.125
3.313
3.437
3.688

1.84
1.97
2.17
2.16
2.53
2.73
2.72
3.06
3.25
3.38
3.66

1.375
1.375
1.750
1.750
1.750
2.313
2.313
1.750
2.313
2.313
3.125

Thread Connection Pin X Box (in.

TPI) UN
15/16-10
15/16-10 UN
15/16-10 UN
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

Slickline Services
DATA DHT-01.00

Sand Pump Bailer

The Sand Pump Bailer is designed to remove sand
and other debris, which may have settled on top of
any sub-surface control within the well, preventing
retrieval of the control by regular wireline operations.
Applications
The Pump Bailer is used to remove sand and other
deposits which may be impeding access for retrieval
of a downhole device
Working on the same principle of the bicycle pump,
the pump bailer is manipulated by the operator,
sucking debris into the bailer chamber
The debris is retained within the body by means of
either a flapper or a ball
Features
Various shoe sizes and types are available
Supplied with industry standard pin connection
complete with fishing neck
Benefits
Removes sand and other debris which may have
settled on top of any sub surface control within the
well

Sand Pump Bailer

Size

F/N OD (inch)

Thread Connection Pin

Guide Shoe OD (inch)*

1-1/4
1-1/2
1-3/4
2
2-1/2
3

1.187
1.375
1.375
1.375
2.313
2.313

15/16-10 UN
15/16-10 UN
15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

1.250
1.50
1.75
2
2.5
3

Slickline Services
DATA DHT-01.00

Sample Bailer
The Sample / Drive Down Bailer is designed to
acquire samples of debris causing an obstruction in
the well.
Unlike standard pump bailers, the Sample Bailer is
also very effective in retrieving heavy substances
Applications
The Sample Bailer is used when it is require to
retrieve a sample of downhole material such as scale
or sand that is causing an obstruction within the well
bore
Features
To acquire samples of debris causing obstruction in
the well
The ball or flapper opens when the bailer enters the
debris and closes as it exists, effectively trapping the
debris inside
Benefits
Unlike the standard pump bailer, it is very effective
in retrieving heavy substances

Size (inch)
1.5
1.75
2
2.5
3
4

Sample Bailer
F/N OD (inch)
Thread Connection Box (in. TPI)
1.375
15/16-10 UN
1.375
15/16-10 UN
1.750
1-1/16-10 UN
2.312
1-1/16-10 UN
2.312
1-1/16-10 UN
2.312
1-1/16-10 UN

Slickline Services
DATA DHT-01.00

Hydrostatic Bailer
The Piston Hydrostatic Bailer is designed to remove
debris which has settled on top or around a
subsurface control within the well, preventing
retrieval by regular wireline operations.
A hydrostatic bailer is used when debris cannot be
removed with a normal pump bailer assembly.
Applications
Hydrostatic Bailers have an atmospheric chamber
which is sealed at surface and then run into the
wellbore. Once on depth, downwards jarring shears
the pin on the piston. This creates a draw in effect,
which draws in the sand, scale etc. onto the bailer
chamber
The debris is contained within the bailer by means
of a ball
Features
Consists of a chamber sealed at surface
atmospheric pressure, complete with a relief plug at
the top and shear piston on the bottom
Supplied with industry standard connections and
fishing necks
Benefits
Can remove debris when over pump bailer assembly
cannot

Hydrostatic Bailer
Size (inch)
1.5
1.75
2
2.5
3
4

F/N OD (inch)
1.375
1.375
1.750
2.312
2.312
2.312

Thread Connection Box (in. TPI)

15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

Slickline Services
DATA DHT-01.00

Wireline Cutter

The Wireline Cutter is required when a slickline or

stranded wireline must be cut in the well.
The Wireline Cutter is run down under its own weight
guided by the line and when it strikes the stuck tool,
it cuts the wire and wedges it into its body.
Subsequently the cutter will be retrieved along with
the cut wire
Applications
The Rotary Wireline Cutter is used when Slickline or
Braided Wire is required to be cut downhole
The cutter is run under its own weight on the wire
until it strikes the stuck tool where it cuts the wire
and wedges itself onto the wire thus being completely
retrievable
Features
Fitted with industry standard connections and
fishing necks
Available for both Slickline and Braided line
Available in standard and interface versions
Benefits
No risk of accidental cutting at interface
Will not cut against the tubing
Wire cutting and retrieval are carried out in one
operation

Wireline Cutters
Size OD (inch)
1.500
1.875

F/N OD (inch)
1.375
1.375

Slickline Services
DATA DHT-01.00

GO Devil
The Go Devil is designed to cut and retrieve wireline
from a stuck tool string.
It is manufactured from a solid length of bar and has
an integral wireline socket head with a milled slot and
guide to accommodate and retain the wire.
Applications
The Go Devil is used in Fishing operations when the
wire is required to be cut. With a slot manufactured
into the whole length of the body, the wire slots into
it and is retained by screws. This allows the Go Devil
to slide down the wire, effecting a cut at the rope
socket leaving a clean fishing neck
Features
Cut and retrieve wireline from a stuck tool string
Manufactured from a solid length of bar and has an
integral wireline socket head with a milled slot and
guide to accommodate and retain the wire
Provide two Go-Devils to suit different situations
when the rope socket is clean and when the rope
socket is fouled by debris
Benefits
Flexible depending on the environment

Go Devil
Size (inch)

Max. OD (inch)

F/N OD (inch)

1-1/2
1-7/8

1.500
1.875

1.375
1.750

Slickline Services
DATA DHT-01.00

Solid Wire Finder

The Solid Wire Finder is designed to locate and ball
the upper end of the broken wireline in the wellbore
during fishing operations.
The wire can then be engaged by a wireline grab and
retrieved
Applications
The Solid Wire Finder is used to locate and ball up
the broken end of Wire, during fishing operations, in
preparation for retrieval
Features
One piece design
Supplied with industry standard connections and
Fishing Necks
Available in various sizes
Benefits
The wire can then be engaged by a wireline grab
and retrieved

Size (inch)
1.500
2.000
2.500
3.000
4.000

Wireline Wirefinder
F/N OD (inch)
Thread Connection Pin (in. TPI)
1.375
15/16-10 UN
1.375
15/16-10 UN
1.375
15/16-10 UN
1.750
1-1/16-10 UN
1.750
1-1/16-10 UN

Slickline Services
DATA DHT-01.00

Wire Grab
The Wire Grab is designed to retrieve a broken
wireline during fishing operations, after a split skirt
wirefinder has been deployed to locate and ball the
upper end of the wire in the well bore.
Applications
The Wireline Grab is normally run after a Wire
Finder
The Wireline Grab is used to grab the ball of wire
that is left in the hole
The Barbs tangle into the wire. The more the grab
is pulled up, the tighter the wire grips the barbs
Features
The wire grab consists of a top complete with
fishing neck and pin connection and a body with two
or three bendable prongs
Each prong has several pointed barbs welded on
the inner side to form hooks
The flexible design allows the operator to bend the
grab prong ends to suit the inside diameter of the
tubing
Benefits
The flexible design helps to prevent the wire grab
from bypassing the broken line

Wireline Grabs
Size(inch)
1-1/2
2 2-1/2
3
4 5-1/2

Max. OD(inch)
1.437
1.843
2.718
2.875

F/N OD (inch)
1.187
1.375
2.312
2.312

Thread Conn. Pin X Box (in. TPI)

15/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

No. of prong
2
2
3
3

Slickline Services
DATA DHT-01.00

Shock Absorber
The Shock Absorber is designed to dampen impact
shock loads that can occur during wireline
deployment and so prevent damage to sensitive
instrumentation being run on the tool string
Applications
The Wireline Shock Absorber is used to reduce the
shock to sub surface instruments such as pressure /
temperature gauges, caused due to the impacts of
jarring
Features
Consists of a main body, top sub, bottom sub, inner
mandrel and absorber strings
The lower spring is heavier than the upper one to
sustain the tool weight
Floating action of the mandrel against the spring
dampens the shock loads
Supplied in stainless steel
Benefits
Dampen impact shock loads during deployment
Prevent damage to instrumentation being run in the
tool string

Wireline Shock Absorber

Size

F/N OD (inch)

Top Connection Pin

Bottom Connection Box

1.50
1.75

1.375
1.375

15/16-10 UN
15/16-10 UN

- 16 UNF
- 16 UNF

Slickline Services
DATA DHT-01.00

Spring Centralizer
The Adjustable Spring Centralizer is designed to
centralize tool strings and gauges during slickline
operations, in the production tubing and exiting into
the casing.
Applications
The Adjustable Spring Centralizer is designed to
centralize sub surface tools in various tubingShock
AbsorberDs
EspecShock Absorbere when running tools out of
the Production string and into the casing strings
Features
Flexible design
Comes with industry standard pin by pin box
connections complete with fishing necks
Benefits
One centralizer can be used for multiple Internal
Diameters of pipe

Bow Spring Centralizer

OD range (inch)

F/N OD (inch)

Top Connection (in. TPI)

27

1.755

15/16-10 UN

Slickline Services
DATA DHT-01.00

Scratcher/Brush
The Wireline Scratcher / Brush is designed to loosen
and remove paraffin wax and scale deposits from
inside the wall of the completion bore.
This operation is usually carried out with the well
flowing through a reduced choke, to remove the
loose wax or solids
Applications
The Wireline Scratchers and Brushes are used to
clean any deposits that may have accumulated on the
tubing walls. They are also particularly effective at
cleaning lSpring Centralizert may hSpring Centralizer
with debris, hindering the setting of sub surface
devices
Features
Wire installation can be
done in two ways to suit
operation
Wire locked in place
with grub screws
Available in various
diameters and supplied
with industry standard
connections complete with
fishing neck
Benefits
Loosens and removes paraffin wax, scale deposits
from inside the wall of the completion bore
Can be carried out while the well is flowing which
does not hinder operations
Flexible wire installation to suit the type of
operation

Scratchers
Thread Connection Pin (inch TPI)
5/16-10 UN
15/16-10 UN
1-1/16-10 UN
1-1/16-10 UN

F/N OD (inch)
1.187
1.375
1.750
1.750

Size (inch)
1-1/2 2-1/16
2 2-1/2
2 2-1/2
3-1/2

Slickline Services
DATA DHT-01.00