Bolt Strength

Technical Data
Strength of Bolts, Screw Plugs, and Dowel Pins
Bolt strength
1When a bolt takes the tensile load
PttAs1
d2t42
Pt Axial tensile load

kgf
bthe bolts yield stresskgfmm2
t the bolts allowable stresskgfmm2
tbsafety factor
As Effective bolt area
mm2
Asd24
d Bolts effective diametershaft diameter
mm
Unwin safety factor based on tensile strength

Material
Static load
Steel
Cast iron
Copper, soft metals
3
4
5
Repeated load
Impact load
Pulsating Reversed
5
8
12
6
10
15
5
9
15
Standard strength Standard strengthThe yield strength for ductile materials

Allowable stress
Safety factor The breaking stress for brittle materials
Example The correct size is required for a socket head cap screw to take a repeat loadpulsatingwith P= 200 kgf.
The materials of a socket head cap screw are: SCM435, 3843HRC, strength category of 12.9.
Using formula
1
AsPtt
20022.4
8.9mm2
A bolt with an effective area larger that this is
2
required, and a 14.2mm M5 would be selected.
Although, if we take into consideration the endurance
strength, looking at the strength category of 12.9, we would choice the M6 with
an allowable load of 213kgf.
2 For stripper bolts for example which take the impact load, the size is decided
from the endurance strength.Likewise for a load of 200kgf, the stripper bolt
would be SCM435, 3338HRC, with a strength category of 10.9.
In the table to the right, the allowable load for load over 200kgf for a strength
category of 10.9 is as M8 at 318kgf. Therefore, the MSB10 would be
selected, with a screw diameter of 10mm like the M8. Please use dowel pins
also to take the shearing load.
Screw plug strength
The yield stress for a strength category of 12.9 isb112kgfmm2

The allowable stresstbsafety factorsafety factor of 5 from the above table
1125
22.4kgfmm2
The bolt endurance strengthFor screws, the endurance strength is 2 million times use.
Strength category
Effective
12.9
10.9
Bolt size bolt area
As Endurance strength Allowable load Endurance strength Allowable load
mm2 kgfmm2 kgf kgfmm2 kgf
M 4
M 5
M 6
M 8
M10
M12
M14
M16
M20
M24
8.78
14.2
20.1
36.6
58
84.3
115
157
245
353
13.1
11.3
10.6
8.9
7.4
6.7
6.1
5.8
5.2
4.7
114
160
213
326
429
565
702
911
1274
1659
9.1
7.8
7.4
8.7
7.3
6.5
6
5.7
5.1
4.7
79
111
149
318
423
548
690
895
1250
1659
Endurance strength is an edited excerpt taken from the measured values of

the endurance limit for small screws, bolts, and meter screws for nutsYamamoto.
Allowable load P is required for screw plug MSW30 to take an impact load.The
MSW30S45C, the tensile strength b of 3443HRC is 65kgf / mm2
.
3.9107.4
4190kgf
Shear area Aroot diameter d1L

root diameter d1MP
AMPL301.512
1074mm2
Yield stress0.9tensile strength b0.96558.2
Shear stress 0.8 X yield stress
46.6
Allowable shear stress tshear stresssafety factor 12
46.6123.9kgfmm2
When the tap is made of soft material,

an allowable shear is required from the root diameter of the female screw.
Root diameter d1
P
When the root diameter section of

the MSW is ruptured due to
shearing strain,
the allowance load P tA
Dowel pin strength

The correct size for a dowel pin is required in order for it to hold repeated shear
weightpulsatingof 800kfg.Material of the dowel pin is SUJ2, hardness of 58HRC.
PA
D24
D 4P
48003.1419.2
7.3
The applicable yield stress of SUJ2 b120kgfmm2

Allowable shear strengthb0.8safety factor
1200.85
19.2kgfmm2
Use dowel pins so that screw parts have no loading.
A size of D8 or more is selected for a MS dowel pin.

Also, the tools and stock etc can be reduced if the size of the dowel pin is consistently large.
1135
Everything noted here are only examples of strengths. In actual practice, the hole pitch precision, the perpendicular angle of the hole, surface
coarseness, circularity, the plate materials, parallelism, whether its tempered or not, the precision of the injection molding machine, production
quantity, tool wear, etc must be taken into consideration. Therefore these values should only be used as a guide.These are not guaranteed figures.
1136

Bolt Strength

Uploaded by

Copyright:

Available Formats

Bolt Strength

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bolt Strength

Uploaded by

Copyright:

Available Formats

Technical Data

Strength of Bolts, Screw Plugs, and Dowel Pins

Pt Axial tensile load

Unwin safety factor based on tensile strength

Standard strength Standard strengthThe yield strength for ductile materials

Screw plug strength

The yield stress for a strength category of 12.9 isb112kgfmm2

Endurance strength is an edited excerpt taken from the measured values of

Shear area Aroot diameter d1L

When the tap is made of soft material,

When the root diameter section of

Dowel pin strength

The applicable yield stress of SUJ2 b120kgfmm2

Use dowel pins so that screw parts have no loading.

A size of D8 or more is selected for a MS dowel pin.

You might also like