Huawei ELTE Broadband Trunking Products

Huawei eLTE
Broadband Trunking Products
On the Move!
Common Network
DBS3900
DBS3900
DBS3900
Rich Terminals
DBS3900
Single Site Network
eCNS210 & eCNS230
eOMC910
eApp & Hardware
Terminal
Huawei offers many types of terminals, including handset,

vehicle radio, CPE, USB dongle, which act as transceivers to
transmit all types of communication, including voice, data and
video services.
EP680/EP650
EP820
EV750
EM710
EG860
EM720
Huawei eLTE Broadband Trunking Products

Terminal
EP680/EP650
The Worlds 1st
Broadband Trunking Handset

Terminal
GPS, Determines position with an accuracy within 10m in open terrain

802.11 a/b/g/n Wi-Fi (Only EP680)
Bluetooth v1.2/2.0/2.0 + EDR (Only EP680)
Secure Operation
For data, photos, video, or voice, the EP680/EP650 brings information to users quickly, reliably, and securely:
Air interface encryption
The development of Mobile Broadband (MBB) has created a need

to integrate MBB with traditional trunking for efficiency and
performance. Based on an in-depth understanding of the requirements, Huawei has introduced the EP680 and
EP650 professional LTE broadband trunking handsets. Each of these handsets integrates voice, data, and video
services into a single device. Except for voice-only trunking, mobile users can communicate using video and
Geographic Information System (GIS) services at the same time, providing better collaboration between response
personnel. Compared with the EP650, the EP680 offers additional functions, such as a front camera, Bluetooth,
End-to-end encryption
Remote terminal activation and deactivation
Stay in Control
A large-scale deployment of portable devices will pose challenges for IT staff. To help make it easier, EP680/
EP650 are compatible with Huawei eOMC610. It can be managed or configured in an integrated manner in the
monitor center even able to delete data from a device that has been lost or stolen.
and Wi-Fi.
Professional Performance for Timely Response
Because quick transfer of accurate information is crucial for the efficient dispatch of urgent resources, the EP680/
EP650 handset supports a group call setup time of less than 300 ms and call pre-emptive time of less than 150
ms. Many other features of the handset also help ensure quick, accurate use in any emergency situation:
Push-to-talk button
3.5mm Headphone Jack

Multi-frequency-band Antenna
Dedicated Camera Button
Private call function

Direct Mode Operation (DMO)
TETRA, PLMN, and PSTN connectivity via the interoperating gateway
Dual-microphone noise-canceling technology for a clear voice signal in 80-dB-noise environments and
recognizable voice in 100-dB-noise environments
Live Video Improves Efficiency
Voice tuning Knob

1.3-Megapixel Camera
(only for EP680)
Dedicated PTT Button
Live video is invaluable for conveying a persons appearance or emergency situations, especially in noisy
environments where voice communications might not be clear. Integrated voice and video trunking helps
2.4-inch TFT Display
Grip Material
transmit live video to command-and-control centers, which can then dispatch the video to other personnel as
High Reliability in the Harshest Environments
High-Output LED Flash

Rugged Accessory Port
operating staff and field personnel get clear and complete information in real time. On-scene personnel can
needed.
5-Megapixel Camera for EP680

1.3-Megapixel Camera for EP650
Battery Release
Ruggedized Construction
To deal with harsh working conditions, the EP680/EP650 is engineered to be waterproof, dustproof (IP67), and
shockproof (MIL STD 810F). This mobile terminal withstands the toughest conditions and provides the high levels
of in-field durability needed to drive down lifecycle support costs.
USB2.0 Port
Secondary Mic
Emergency Call Button

PTT Mic
Withstands multiple 1.5m drops per MIL STD 810F

Operates reliably after 200 consecutive 1m tumbles
Rated IP67 design with complete protection against water and dust
Versatile Connectivity
The EP680/EP650 works with many different types of connectivity:
LTE TDD 400 MHz/1.4 GHz/1.8 GHz/2.3 GHz
LTE FDD 800 MHz
03
04

Terminal

Terminal
EP680
EP650
Radio Section
Battery
Release
3GPP Release 9
Frequency
band
LTE-TDD 400 MHz: 380 to 470 MHz

LTE-TDD 1.4 GHz: 1,447 to 1,467 MHz
LTE-FDD 800 MHz: 832 to 862 MHz (UL),
791 to 821 MHz (DL)

Bandwidth
400 MHz band: 3 MHz/5 MHz/10 MHz/20 MHz

800 MHz band: 5 MHz/10 MHz/20 MHz
1.4 GHz band: 5 MHz/10 MHz/20 MHz

DMO
Power level
Supported (400 MHz to 470 MHz)

1.8 GHz frequency band: 252 dBm
800 MHz frequency band: 252 dBm
400 MHz frequency band: 272 dBm
DMO: 302 dBm
UE capability

DMO: 302 dBm
Category 4
Connection Options
Battery
Li-ion, 3.7V, 3,000 mAH
Battery time
Trunking mode (5:5:90) > 29 hours

LTE standby mode > 72 hours
Video surveillance mode > 6 hours
DMO standby mode > 30 hours (DMO only)
Video
Supported
Formats
Windows Media Video (WMV) 10, WMV 9, H.264
Video
Recording
Quality
CIF (176 x 144) resolution at 25 frames per second (fps)

D1 (720 x 480) resolution at 25 fps
720p (1,280 x 720) resolution at 25 fps
1080p (1,920 x 1,080) resolution at 25 fps
Protection Level
Water & Dust
Proof
IP67 sealed (complete protection from dust; protected against low-pressure jets)
Shock proof
MIL STD 810F
WLAN
Wi-Fi 802.11 b/g/n
Not Supported
Working
temperature
-20 to +60
Bluetooth
Bluetooth v1.2/2.0/2.0 + EDR
Not Supported
Storage
temperature
-40 to +85
USB
GPS
Mini USB 2.0

Supported
Not Supported
Hardware
Screen
2.4 inch QVGA 240 x 320 TFT
Camera
Rear camera: 5 megapixels

Front camera: 1.3 megapixels
Rear camera: 1.3 megapixels
Memory
MCP (1 GB DDR + 8 GB EMMC)
SIM Card
Port
05
EP680&EP650
Physical Characteristics
Dimensions
(H x W x D)
154 mm x 62.5 mm x 34.6 mm (not including external antenna)
Weight
380g (including battery)
Software-based SIM card

USB 2.0 High-Speed
3.5 mm audio jack (stereo)
Accessory port
06

Terminal
EP820
The Worlds First Touch-screen
Multimode LTE-broadband-trunking
Smart Handset
The Huawei EP820 professional LTE broadband trunking handset
integrates voice, data, and video services into a single device.

Terminal
Private Network: LTE TDD 400 MHz
Public 2G Network: GSM 850/900/1800/1900
Public 3G Network: UMTS 900/1900
802.11 a/b/g/n Wi-Fi
GPS, determines position within 10m in open terrain
Bluetooth 4.0 EDR
Secure Operation
For data, photos, video, or voice, the EP680/EP650 brings information to users quickly, reliably, and securely:
Air interface encryption
End-to-end encryption
Except for voice-only trunking, group members can receive onsite video anywhere, providing better collaboration
Remote terminal activation and deactivation
between response personnel.
Can be Customized
As a smart phone, the EP820 is based on the Android 4 OS and can access both public and private networks. The
Based on the Android 4 OS, the EP820 provides extensive Software Development Kit (SDK) interfaces. These
EP820 is thus ideal for public safety, oil-and-gas work, and transportation, where users need flexible handovers
interfaces permit customizations to handle specialized requirements.
between the two networks. The handsets 4.5-inch high-sensitivity touch screen can be used with a separate
keyboard for easy and accurate data entry.
Professional Performance for Timely Response

Because quick transfer of accurate information is crucial for the efficient dispatch of urgent resources, the EP820
Dedicated PTT Button
handset supports a group call setup time of less than 300 ms and call pre-emptive time of less than 150 ms.
Many other features of the handset also help ensure quick, accurate use in any emergency situation:
Push-to-talk
Private call
PTT Mic
2-Megapixel Camera
Ruggedized Construction
USB 2.0 Port
Direct Mode Operation (DMO)

TETRA, PLMN, and PSTN connectivity via the interoperating gateway
Dual-microphone noise-canceling technology for a clear voice signal in 80-dB-noise environments and
4.5 in Display,
Advanced Capacitive
Touch Screen
recognizable voice in 100-dB-noise environments
Voice tuning Knob
Live Video Improves Efficiency

Power Button
Live video is invaluable for conveying a persons appearance or emergency situations, especially in noisy
environments where voice communications might not be clear. Integrated voice and video trunking helps
operating staff and field personnel get clear and complete information in real time. On-scene personnel can
transmit live video to command-and-control centers, which can then dispatch the video to other personnel as
needed.
Speaker
High Reliability in the Harshest Environments
Programmable keys
(Could be programmed as
Dedicated Camera Button)
3.5 mm Headphone Jack

Emergency Call Button
To deal with harsh working conditions, the EP820 is engineered to be waterproof, dustproof (IP67), and
shockproof (MIL STD 810F). This mobile terminal withstands the toughest conditions and provides the high levels
of in-field durability needed to drive down lifecycle support costs.
Withstands multiple 1.5m drops per MIL STD 810F
operates reliably after 200 consecutive 1m tumbles
Rated IP67 design with complete protection against water and dust
13-Megapixel Camera
High-Output LED Flash
Rugged Accessory Port
Grip Material
Exceptional Connectivity
The EP820 supports both GSM/UMTS and LTE TDD models. It works with many different types of connectivity:
07
Extended Button
Battery Release
External
keyboard
08

Terminal
Radio Section

Terminal
Battery
Release
3GPP Release 9
Battery
LI-ion, 3.7v, 4000mAH
Frequency band
Private Network
LTE-TDD 400 MHz: 380 to 470 MHz
Public Network
UMTS 900/1900
GSM 850/900/1800/1900
Battery time

LTE standby mode > 68 hours
Video surveillance mode > 4.5 hours
DMO standby mode > 30 hours (DMO only)
Bandwidth
400 MHz band: 3 MHz/5 MHz/10 MHz/20 MHz
Video
DMO
Supported (400 MHz to 470 MHz)
Supported Formats
Windows Media Video (WMV) 10, WMV 9, H.264
Power level
380 MHz to 450 MHz: 262 dBm

450 MHz to 470 MHz: 222 dBm
DMO: 30 2 dBm
Video Recording Quality
CIF (176 x 144) resolution at 25 frames per second (fps)

D1 (720 x 480) resolution at 25 fps
720p (1,280 x 720) resolution at 25 fps
1080p (1,920 x 1,080) resolution at 25 fps
UE capability
Cat 4
Protection Level
Hardware
Screen
4.5 inch, capacitive, finger-driven touch screen

Damage-resistant Corning Gorilla Glass
Camera
Rear camera: 13 megapixels

Front camera: 5 megapixels
Memory
MCP (2 GB RAM + 8 GB EMMC)
SIM Card
Software-based SIM card for private network

Hardware-based SIM card for public network
Port
USB 2.0
3.5 mm audio jack (stereo)
Accessory port
Charging port
Water & Dust Proof
Without keyboard: IP67 sealed (Totally protected against dust and Protected
against low pressure jets )
With keyboard: IP65 sealed (complete protection from dust; protected
against immersion )
Shock proof
MIL STD 810G
Working temperature
-10 to +55
Storage temperature
-30 to +60
Physical
Dimensions (H x W x D)
152 mm x 72 mm x 25 mm (not including external antenna)
Weight
350g (with battery, without keyboard )

420g (with battery and keyboard)
Software
Operating System
Android Open Source 4
Language
Chinese/English/Spanish
Connection Options
09
WLAN
Wi-Fi 802.11 b/g/n
Bluetooth
BlueTooth 4.0 EDR
USB
Mini USB 2.0
GPS
Supported
10

Terminal

Terminal
Accessories
for Handset
Carrying Accessories
Professional Audio Accessories

Hand/Shoulder Speaker
Clipped to an epaulet or collar or held in the
hand, this speaker allows users to hear voice
communications clearly without holding the entire
handset.
Strap
Lightweight Neckband In-ear Headphone
Lightweight and durable.
Worn on the head with the PTT button on line, this
Comfortable to wear around hand.
headphone suits active personnel such as police,
Keeps phone safe and handy.
people on fast-moving vehicles such as motorcycles

or boats, or people who work with machine or
wind noise.
Clip
Easy to install
Attaches handset securely to belt
Air Conduit Headphone

This device suits police and security personnel who
need an unobtrusive headphone.
Video Accessories
USB HD Camera
Noise-cancelling Headphone
This camera can be used in situations
By covering the ears, this headset helps protect
where users need to keep their hands
against loud noises in environments such as airport
free by wearing handsets on their waists
taxiways or heavy manufacturing facilities.
and external cameras on their helmets.

Sensor resolution: 1,920 x 1,080
Still image: 5 megapixel
Throat Vibration Mic Headphone

Worn on the neck, this headphone works well for
users who cannot wear a more bulky headphone,
such as people wearing helmets or gas masks.
11
12

Terminal

Terminal
Features and Benefits

LTE-compliant
EV750
Professional trunking service, video dispatch, and broadband data, all in compliance with the international
LTE-TDD standard
GPS location
The Worlds First Broadband

Trunking Vehicle-Radio
The ability to determine position within 10 meters in open terrain

Clear voice
Clear voice signal generated by dual-microphone, noise-cancellation technology
Integrating Mobile Broadband (MBB) with traditional trunking improves personnel efficiency and performance.
Security
The EV750 is the worlds first LTE broadband-trunking vehicle radio that integrates voice, data, and video services
Air-interface encryption, end-to-end encryption, and remote terminal activation and deactivation
Programmable
into a single device. Except for voice-only trunking, users can communicate with video and GIS services at the
same time, providing better collaboration between personnel.
Interfaces provided for customization to support future requirements
Specifications
Professional Performance for First Responders
Radio Section
The transfer of timely and accurate information is critical for efficient dispatch of urgent resources. The EV750
professional trunking vehicle radio supports a group call setup time of less than 300 ms and a call pre-emptive
Frequency band
TDD
1.8 GHz frequency band: 1,785 to 1,805 MHz
1.4 GHz frequency band: 1,447 to 1,467 MHz
400 MHz frequency band: 380 to 470 MHz
FDD
800 MHz frequency band:
uplink: 832 to 862 MHz/downlink: 791 to 821 MHz
DMO
400 to 470 MHz
Transmission Power
1.8 GHz frequency band: 25 2 dBm

1.4 GHz frequency band: 25 2 dBm
800 MHz frequency band: 25 2 dBm
400 MHz frequency band: 27 2 dBm
DMO: 30 2 dBm
time of less than 150 ms, ensuring a timely response to any critical situation.
Multiband Operation Helps Users Stay Connected
To make use of whatever radio spectrum is available, the EV750 offers 400 MHz/800 MHz/1.4 GHz/1.8 GHz
multiband connectivity. The EV750 also supports fast frequency customization.
Function Expansion Interface for Maximum Versatility
A multi-function expansion interface enables attachment of devices such as USB/FE cameras.
Multiple Security Technologies to Protect User Information
To meet high-security communications requirements, the EV750 supports bidirectional authentication, air
interface encryption, and remote enable/disable terminal functions.
Physical Characteristics
Tuning
Knob
Status
Indicator
2.4-inch
TFT LCD
Menu
Key
Return
Key
1. Control head: 67 mm x 187 mm x 40 mm

2. Transceiver only: 50 mm x 170 mm x 140 mm
Weight
1,500g
Screen
2.4-inch TFT LCD with QVGA resolution (240 x 320 pixels)
Memory
OK/ Speed dial key
Case Hardened
Direction Key
Emergency
Call key
Video
Uploading
Key
Hand
Microphone Programmable
keys
Port
13
Home/
Hangup/
Power Key
DVI Interface
Antenna 2
Antenna 1
GPS Interface
Power Interface
Protection level
IP54
Shock proof
ETS 300 019-1-5 Class 5M4
Working temperature
-20C to +60C
Call
Key
Connection Options
WLAN
Wi-Fi 802.11b/g/n
Bluetooth
Bluetooth Version 1.2/2.0/2.0 + EDR
USB
Mini USB 2.0
14

Terminal

Terminal
EG860
Specifications
Industrial Grade CPE
Radio Specifications
The EG860 is a Long-Term Evolution (LTE) wireless Customer Premises Equipment

(CPE) device for enterprise networks. This compact unit features centralized fault
Technical standards
WAN: LTE 3GPP Release 9

LAN: IEEE 802.3/802.3u
WLAN: Wi-Fi 802.11b/g/n
UE capability level
Category 4
LTE Operating Bands
LTE-TDD 400M: 380 MHz to 470 MHz

LTE-TDD 1.4G: 1447 MHz to 1467 MHz
LTE-TDD 1.8G: 1785 MHz to 1805 MHz
LTE-FDD 800M:
832 MHz to 862 MHz Uplink
791 MHz to 821 MHz Downlink
WLAN Operating Bands
2.4G: 2.401 GHz to 2.483 GHz
Working bandwidth
400 M: 3 MHz/5 MHz/10 MHz/20 MHz

800 M: 5 MHz/10 MHz/20 MHz
1.4 G: 5 MHz/10 MHz/20 MHz
1.8 G: 5 MHz/10 MHz/20 MHz
detection and recovery along with remote management for easy deployment
of current and future broadband resources. Serving as a wireless gateway for
high-speed data services, the EG860 complies with LTE 3GPP standards. The unit
incorporates a built-in antenna in an anti-lightning, shockproof, dustproof, and
waterproof enclosure for withstanding harsh environments.
Highlights
High Performance
The EG860 supports multiple uplink to downlink ratio configurations, including 3:1 for streaming dataintensive uplink services such as video surveillance and data collection.
Strong Protection
The EG860 is built to withstand extreme weather conditions and meet industry requirements for protection
from shock, water, dust, and lightning.
Physical Specifications
Easy Maintenance
The EG860 supports a web-based Graphical User Interface (GUI) for remote management and maintenance,
240mm 200 mm 60 mm
Weight
2000 g
Power consumption
30 W
Power supply
PoE, 24V DC
External ports
1 Ethernet port (RJ45)

2 External antenna port (N)
1 SIM card slot (supports software SIM card)
Installation mode
Gin pole / wall mounted
while LED indicators enable on-site status checks. The remote management features simplify deployment of
current and future broadband resources as well as centralized fault detection and recovery.
Multi-Frequency
The eA660/EG860 has a built-in DHCP server and provides DNS client and Network Address Translation (NAT)
services for flexible networking options. The EG860 offers a wide range of licensed and unlicensed mobile
access frequencies (400M/800M/1.4G/1.8G/2.3 GHz) to accommodate existing broadband resources.
Environment Specifications
15
Protection level
IP65
Anti-shock capabilities
ETS 300 019-1-5 class 5M3
Working temperature
-40C to 60C
Storage temperature
-40C to 70C
Relative humidity
5% RH to 95% RH
16

Terminal

Terminal
EM710
Specifications
Hardware Technical Specifications
Industrial Grade USB Dongle

Supported frequency band
1.8G: 1,785 to 1,805 MHz

1.4G: 1,447 to 1,467 MHz
Power level
1.8G: 23 2 dBm
1.4G: 23 2 dBm
Bandwidth
1.8G: 5 MHz/10 MHz/20 MHz

1.4G: 5 MHz/10 MHz/20 MHz
Sensitivity
5 MHz: -100 dBm

10 MHz: -97 dBm
20 MHz: -94 dBm
UE capability
Cat 4
Modulation
QPSK, 16QAM, 64QAM uplink

QPSK, 16QAM, 64QAM downlink
Enables Internet access, data uploading and downloading
Dimensions (L x W x D)
85 mm x 43 mm x 10 mm
Frequency band: 1.4G/1.8G
Weight
45g
Power supply
USB 5V
Power consumption
Average power consumption: 4.53W
Interface
Mini USB 2.0
Operating temperature
-20 to +60
Storage temperature
-40 to +70
Humidity requirement
Relative humidity: 5% to 95% ( noncondensing )
Indicators
Blue LED
SIM type
Soft SIM
Safety requirement
Meets EN60950: 2001
SAR
CE: EN62311, EN62209-2

FCC: IEEE C95.1
EMC
EN55022 Class B Compliance

Contact discharge: Min 6 kV, Ref 8 kV
Air discharge 12 kV, Ref 15 kV
Certification
China radio transmission equipment Type Approval ( CTA )

CE certified
RoHS
The Huawei EM710 USB dongle provides Long-Term Evolution (LTE) network access for enterprise users. With the
EM710s powerful data capacity, users can perform mobile office work using PCs or other devices that have USB
interfaces.
Users connect the EM710 to a PC through a USB interface, and the EM710 accesses an LTE network for users to
log in to enterprise office-automation and email systems, browse web pages, and download data. Users can also
connect the EM710 to a device that has a USB interface and runs Microsoft Windows XP/VISTA/7 OS.
Highlights
Maximum transmission rate: DL 100 Mbit/s, UL 50 Mbit/s
Supports MIMO and 64 QAM

Working temperature: -20 to +70
Supports WINXP/WIN7/VISTA, automatic installation
17
18

Terminal

Terminal
EM720
Specifications
Radio Specifications
Industrial-Grade Mobile Hotspot
Protocols
LTE: 3GPP Release 9

Wi-Fi: IEEE 802.11b/g/n
Frequency bands
LTE TDD 1.8 GHz: 1,785 to 1,805 MHz

LTE TDD 1.4 GHz: 1,447 to 1,467 MHz
Wi-Fi 2.4 GHz: 2,412 to 2,472 GHz
Power level
1.8 GHz: 24 2 dBm

1.4 GHz: 24 2 dBm
Bandwidth
1.8 GHz: 5 MHz/10 MHz/20 MHz

1.4 GHz: 5 MHz/10 MHz/20 MHz
Sensitivity
5 MHz: -100 dBm

10 MHz: -97 dBm
20 MHz: -94 dBm
Modulation
Uplink: QPSK, 16 QAM, 64 QAM

Downlink: QPSK, 16 QAM, 64 QAM
UE capability
Cat 4
Max WI-FI rate
300 Mbit/s
In addition to eLTE terminals, enterprise customers can take advantage of many Wi-Fi-enabled peripheral devices
using the EM720 mobile Wi-Fi hotspot. The EM720 gives Wi-Fi-enabled devices access to the LTE broadband
network and has a large battery capacity that can be used for mobile charging.
Base
Station
LTE
EM720
Base
Station
Hardware Specification
Base
Station
Dimensions (L x W x D)
121 x 70 x 23.5
Stand battery
LI-ion, 3.7v, 6000mAH
Input power
5V 1.5A
Output voltage
5.2V DC10%
Output current
1A
Operating temperature
-10 -45
Storage temperature
-20 to 60
Portable Wi-Fi Hotspot
Humidity requirement
10 85 RH
The EM720 is a small Wi-Fi hotspot that enables devices such as pads, PCs, mobile phones, and PDAs to browse web
External Port
Mini USB 2.0
Broadband Access
Mobile Charger
pages and download data via the LTE network.

Mobile Charger
Working Time
With a 6,000 mAH battery capacity, the EM720 can charge most mobile devices at least twice.
Stand By Time
14 hours (LTE stand-by, Wi-Fi on)
PC Management
Working Time
10 hours (-95 dB, single user uploading data)
Supports Windows 7, automatic installation
19
20
Base Station
Huawei promotes a distributed base station DBS3900 for
eLTE solution. The DBS3900 fully utilizes Huawei platform
resources and a variety of technologies to meet the
challenges of mobile network development.

Base Station
DBS3900
eLTE Distributed Base Station
Used for radio access in an eLTE system and as an enterprise base station, the DBS3900 suits a wide range of
applications that require precise Base Transceiver Station (BTS) capabilities. The DBS3900 includes two basic types
of modules: a Base Band Unit (BBU) and a Remote Radio Unit (RRU). These modules can be flexibly configured
to meet a variety of usage requirements. In addition, the DBS3900s small size, low power consumption, and
flexible installation enable easy deployment.

Base Station
Features & Benefits

Mobility Management
Smart Network Configuration and Optimization
Ultra High Speed Mobility
Reliability
Extended Cell Access Radius
1+1 Backup of the eNodeB Main Control Board
Network Security
Baseband Board Backup (CPRI Backup)
Voice over IP (VoIP)
Transmission Networking
Trunking Voice Services
Admission and Scheduling
Location Services (LCS)
Active Queue Management (AQM)
Way Antenna Extension
Radio/transport resource pre-emption

Power Saving
Supports 2 x 2 MIMO and 4 x 2 MIMO
Intelligent power-off of carriers in the same coverage
Supports UE Category 2/3/4
Power Supply Unit (PSU) intelligent sleep mode

Symbol power saving
Specifications
Distributed Base Station (DBS3900)
Multiple frequency bands
Time Division Duplex (TDD): 400 MHz/1.4 GHz/1.8 GHz/2.3 GHz

Frequency Division Duplex (FDD): 800 MHz
Bandwidth
400MHz: 3M/5M/10M/20MHz
1.4GHz: 10M/20MHz
800M/1.8G/2.3GHz: 5M/10M/20MHz
Synchronization
GPS, IEEE 1588v2
System availability
99.999%
Mean Time Between Failures (MTBF)
155,000 hours
Mean Time to Repair (MTTR)
1 hour
System reset time
< 450 seconds
High Performance Mobile Broadband Access Network
Base Band Unit (BBU)
The DBS3900 supports high data rates. Downlink and uplink rates can reach up to 100 Mbit/s and 50 Mbit/s @
20 MHz per cell, respectively. For coverage of remote sites such as offshore drilling platforms, the DBS3900 can
Height
2U
provide ultra-long-distance coverage up to 100 kilometers. For railways, the DBS3900 provides up to 430 km/h
Weight
12 kg (Max. configuration)
high-speed train coverage.
Power supply voltage
-48 V DC (voltage range: -38.4 V DC to -57 V DC)
Worlds Leading Professional Broadband Trunking
Average power consumption
165 W (Typical configuration)
Based on LTE technology, the Huawei DBS3900 is the worlds leading professional broadband trunking solution.
Maximum configuration
One BBU for 12 RRUs
Its advanced features include priority call, call hold, late entry, dynamic grouping, and fallback mode. In addition,
Protection level
IP20
the DBS3900 provides outstanding performance for traditional trunking with a group call setup time less than
Working temperature
20C to +55C
300 ms and a pre-emptive priority call time less than 150 ms. Combining voice and real-time video trunking
Relative Humidity
5% RH to 95% RH
in the same base station reduces Capital Expenditure (CAPEX) costs compared to traditional trunking and data
Remote Radio Unit (RRU)
service solutions.
23
Multiband for Diversified Frequency Resources
Power supply voltage
-48 V DC, 220 V AC
The DBS3900 supports multiple frequency bands, including LTE-TDD 400 MHz/1.4 GHz/1.8 GHz/2.3 GHz and LTE-
Weight
24 kg
FDD 800 MHz. Wide frequency band availability simplifies network deployment and allows the system to adapt
Protection level
IP65
to various frequency policies with higher flexibility.
Working temperature
-40 to +55
Relative Humidity
5% RH to 100% RH
24
Core Network
The Evolved Packet Core (EPC) framework provides a host
of benefits for customers seeking converged voice and data
solutions. As an industry leader in EPC, Huawei offers a solution
based on an advanced Long-Term Evolution (LTE) EPC platform,
built to meet enterprise requirements. The Huawei Enterprise
LTE (eLTE) solution customizes the Enterprise Core Network
System (eCNS) for corporations and government agencies.

Core Network

Core Network
eCNS210
Features & Benefits

Mobility Management
Bidirectional Forwarding Detection (BFD)
eLTE Core Network for

Large Networks
Security Management
Offline Charging
Session Management
Interoperability with Public LTE
Integrated Subscriber Data Management
Routing
The eCNS210 compact Evolved Packet Core (EPC) system is ideal for dedicated enterprise networks, with a high
Trunking Voice Services
IP Network Management
level of integration, reliability, and interoperability. To handle the requirements of enterprises, the eCNS210
Reliability
Roaming
supports a diverse range of services, including voice, video, and data. Additionally, this system offers the
eCNS Redundancy
IP Network Management
preferred model for broadband trunking.
1+1 eCNS Board Backup
Routing
S1
Interface
SGi
Interface
Network Time Protocol (NTP)
QoS Profile Control Based on Security Parameter
Virtual Local Area Network (VLAN) Support
Index (SPI)
Application
Server
DBS3900
Eth-Trunk
Traffic Management
Routing Behind
Security Management
NAS Encryption and Integrity Protection (AES)
Internet
DBS3900
S1
Interface
NAS Encryption and Integrity Protection (SNOW3G)

Operation and Maintenance (O&M) SSL
eCNS210
DBS3900
Quality of Service (QoS)
SGi
Interface
Dispatcher
System
Specifications
High Performance
With a pedigree in LTE/EPC product development, the eCNS210 supports up to 40 Gbit/s throughput with
Performance Specifications
Maximum subscribers
200,000
needs, such as carrying voice, dispatching commands, exchanging operational data, delivering video, and more.
Maximum eNodeBs
1,500
In addition, the eCNS210s Quality of Service (QoS) mechanism ensures critical data transmission in any situation.
Maximum throughput
40 Gbit/s
High Integration
Maximum groups
20,000
200,000 subscribers and 20,000 trunking groups. This product can be deployed to meet current and future
A typical public LTE core network incorporates the Mobility Management Entity (MME), Serving Gateway (SGW),
Packet Data Network Gateway (PGW), Home Subscriber Server (HSS), and Policy And Charging Rules Function
Physical Specifications
(PCRF) network elements. The eCNS210 integrates all of these elements into one subrack, enabling network
deployment with minimal integration effort. The systems high level of integration also reduces deployment risk
Subrack dimensions (H x W x D)
622mm x 442 mm x 437 mm
and minimizes setup time. Enterprises can avoid over-commitment of valuable resources to engineering efforts
Subrack weight
< 93 kg (Full configuration)
and reduce operational and capital expenditures.
Power supply
-48 V DC
Working temperature
Long term: 0 to +45

Short term: -5 to 0 , +45 to +55
Storage temperature
-40C to 70C
Relative operating humidity
Long term: 5% RH to 85% RH

Short term: 85% RH to 95% RH
Hardware: 1+1 board backup and eCNS geography redundancy
System availability
99.999%
Software: Overload control, fault prevention, automatic data backup, and operational security management.
Mean time between failures (MTBF)
322,580 hours
Mean time to repair (MTTR)
1 hour
High Reliability
Based on an Advanced Telecommunications Computing Architecture (ATCA) hardware platform, the eCNS210
products are designed to operate with high reliability from the system architecture to the components.
Industry-standard ATCA hardware supports varying degrees of redundant configurations to match application
requirements:
These reliability mechanisms ensure an eLTE core network availability of 99.999%.
27
28

Core Network

Core Network
Features & Benefits
eSCN230
eLTE Core Network for
SME Network
PTT Services
Transmission Service Function
Data Services
Transmission Configuration Function
User and Group Management
Operation and Maintenance (O&M) Function
Backup function
Routing behind the Mobile Station (MS)
Supports dual machine backup (Disaster Recovery)
Interoperable with Trans European Trunked
PS Pool Function
Radio(TETRA), Public Switched Telephone
The eSCN230 carries out load balancing functions

The eSCN230 is a 2U LTE integrated Evolved Packet Core (EPC), which provides a compact, cost-effective
broadband trunking solution. This solution offers high reliability and is ideally suited for Small- and Medium-sized
Enterprise (SME) networks.
whereby Packet Switched (PS) services can be shared
Network (PSTN), and Public Land Mobile

Network (PLMN)
between two working eSCN230. When one of the two

systems fail, the other eSCN230 can immediately take
over all the PS services and ensure that they continue.
Miniaturization and High Integration

With the goal of building SME networks, Huawei has designed the highly-integrated eSCN230 by combining a
Specifications
Home Subscriber Server (HSS), Serving Gateway (SGW), Mobility Management Entity (MME), and Packet Data
Performance Specifications
Network Gateway (PDN-GW) in a 2U, lightweight box. This easily deployed system provides exceptional flexibility
for low-density-subscriber-area deployments.
Maximum subscribers
4,000
Maximum groups
512
work in a data-plane-based load-balancing configuration with active sessions for all connected users to minimize
Maximum eNodeBs
50
user data loss. This active connectivity maintenance improves system reliability.
Maximum throughput
2 Gbit/s
Dual Backup for High Reliability

The eSCN230 supports dual-backup operation to achieve high reliability. In dual-backup mode, two eSCN230s
Interconnection and Interoperability

The eSCN230 allows eLTE users to communicate with Terrestrial Trunked Radio (TETRA), Public Switched
Hardware Specifications
Telephone Network (PSTN), and Public Land Mobile Network (PLMN) users as well as other external systems via
29
connections with intersystem gateways. With this high level of interoperability, organizations can build a unified
86 mm x 442 mm x 310 mm
communications system and handle voice and video services across the entire system.
Weight
6.85 kg (Full configuration)
Power supply
48 V DC
Voltage range: -38.4V DC to -57V DC
Power consumption
110 W
Heat dissipation mode
Air-cooled ( Air enters from the left and exits to the right )
Working temperature
20 to 50 ( long-term)
50 to 55 ( short-term)
Operating relative humidity
5% RH to 95% RH
Protection level
IP20
System availability
99.999 %
Mean Time Between Failures (MTBF)
155,000 hours
Mean Time to Repair (MTTR)
1 hour
30
Network Management System

Huaweis Network Management System (NMS) centrally manages
mobile Network Elements (NEs), including the core network, base
stations, and terminals. The NMS provides management functions
such as configuration, performance, fault detection, security, logs,
topology, software, and system management.


eOMC910
Powerful Equipment Management

The eOMC910 provides an extensive network management platform, including management of topology,
configuration, performance, fault detection, software, security, system, terminal, logs, and equipment preventive

for Fixed Network and Wireless
Device Maintenance
maintenance.
The eOMC910 acts as an operation and maintenance center for all primary eLTE network elements, including the
core network, base station, dispatching server, and wireless devices. The administrator can easily perform system
configuration, software upgrades, equipment diagnostics, and performance monitoring via a graphical interface.
eOMC910
Standard Hardware Platform

The eOMC910 is based on a standard workstation server or PC. Several server types can be used to adapt to the
network scale. A PC can be used for a very small network to minimize costs or for a vehicle-mounted solution
with limited space. A powerful server suits a large network or a network that requires exceptional reliability. An
existing server or PC can be repurposed for running the eOMC910 software.
Wireless Device
Base Station
Core Network
Dispatching Server
PC
Unified Maintenance Platform
network deployment efficiency.
Large Server
10 base stations
and 1,000 wireless
devices
50 base stations and

4,000 wireless devices
200 base stations and 500 base stations and

8,000 wireless devices 10,000 wireless devices
Mode 2
5,000 wireless
devices
40,000 wireless
devices
CPU: 2* Intel Xeon E52620( 2.00GHz, 15M

Cache, 7.2GT/s QPI,
Turbo, 6C 95W)
Memory: 2 x 8GB,
1600Mhz, dual arrays,
LVRDIMMs
Hard disk: 3*600GB, 2.5inch, 10K RPM, 6 Gbit/s,
SAS, hot-swappable
CPU: Intel Xeon E52690 (2.90 GHz, 20M

cache, 8.0 GT/s QPI,
Turbo, 8C, 135W)
Memory: 2 x 16 GB,
1,600 MHz, dual
arrays, LVRDIMMs
Hard disk: 6 x 600 GB,
2.5-inch, 10k RPM,
6 Gbit/s, SAS, hotswappable
CPU: Intel Xeon E54620(2.40 GHz, 16M

cache, 8.0 GT/s QPI, Turbo,
Octa-core, 95W)
Memory: 4 x 16
GB,1,600MHz, dual arrays,
LVRDIMMs
Hard disk: 9 x 600 GB, 2.5inch, 10k RPM, 6 Gbit/s,
SAS, hot-swappabl
access terminals, eNodeBs, core networks, and an eMDC610 on trunking networks, as well as third-party
equipment. Remote management for wireless devices significantly reduces maintenance costs and increases radio
Medium Server
Mode 1
The eOMC910 is the only NMS system that can manage a fixed network as well as wireless devices. The system
provides a unified network view and supports the integrated management of handheld devices, broadband
Small Server
Hardware
CPU: Intel E5300
Specifications Memory: 2 GB
Hard disk: 160 GB
DVDRW/network
adapter/audio
adapter/sound box/
LCD display with a
resolution of 1,024
x 768 x 65K
OS: Microsoft
Windows 7.0
*Note:
Mode 1: eOMC server manages both network (including core network and base station) and wireless devices
Mode 2: eOMC server manages wireless devices only
33
34
Dispatch System
Huaweis eAPP dispatching platform provides a GUI for
comprehensive exchange of dispatch information, including
voice, data, and video. This platform interoperates with the
PLMN, PSTN, and trunking systems.

Dispatch System

Dispatch System
Multimedia Dispatching with Rich Functionality

Voice trunking, force preemption and release, dynamic grouping, and temporary group call
Dispatch
Platform
Short messaging and multimedia messaging for point-to-point and point-to-multipoint

Portable terminal video transmission, distribution, and transcoding
Geographic Information System (GIS): Mobile terminals report real-time location data, and the dispatching
console displays GIS location data.
Key Features
For public safety, traffic, energy, and similar organizations, a wideband trunking dispatch service brings new
efficiencies with voice, data, and video communications. Huaweis reliable, high-performance dispatching
system ensures timely information sharing for decision-making and quick transmission of commands. Huaweis
Easy deployment: All terminals can be remotely configured, and all policies (such as user permissions) are
managed by dispatching consoles.
High reliability: Core devices, such as the dispatcher and base station, can take advantage of dual-host
standby to avoid a network-wide breakdown in the case of a single-host failure.
dispatching platform can meet requirements for a wide range of application scenarios.
Distributed deployment mode: Since IP networks are used for transmission, the system works with data
links such as Metropolitan Area Networks (MANs), optical fibers, and satellite links. Unlike conventional voice
communication that is constrained by the transmission distance of copper cables, the devices in the eAPP
Vehicle Scenario
Single Station or
Small Network Scenario
system can be far apart from each other.

Large Network Scenario
eMDC610: Multimedia Dispatching and Processing Center

Provides dispatch services such as trunking, video, and Short
Messaging Service (SMS), at the heart of the eAPP system.
Ample communication modes: The system can interwork with a wide variety of networks and devices such
as PSTN, GSM, Wi-Fi, TETRA, MT1327, and satellite networks and devices.
Various secondary development interfaces: Interfaces to upper-layer applications provide smooth
application migration or low-cost development of new applications by customers and partners.
The dispatching platform works with application scenarios involving large networks, small networks, vehicles,
Server
and single-station rapid deployment. The following table lists the typical configurations in each scenario.
Disk Array
eMRS610: Multimedia Recording and Playback Server

Provides media recording, on-demand services, media management,
and access to cameras.
Huawei Dispatching System
eDC610: Dispatching Console

Manages services such as voice, video, SMS, Multimedia Messages
(MMs), and Global Positioning System (GPS) location.
PLMN Gateway
PSTN Gateway
Application scenarios
Large network
scenario
Rapid
deployment
system
Small network
scenario
Maximum registered users
200,000
4,000
100
Maximum registered groups
20,000
512
40
Maximum concurrency PTT users
2,000
512
40
Maximum base stations
1,500
30
1 eCNS210 for 40 Gbit/s
1 eSCN230 for 2 Gbit/s
2 eCNS210 for 80 Gbit/s

(PS pool mode)
2 eSCN230 for 4 Gbit/s

(PS pool mode)
TETRA Gateway
PLMN/PSTN/TETRA Gateway
Provides interworking function with PLMN/PSTN/TETRA.
System throughput
320Mbit/s
HD Decoder
Video/Audio Decoder
Supports variable network transmission protocols and bit rates to
decode and output video streams
37
38
eLTE Rapid
Integrating baseband processing, packet data
switching, and scheduling functions, the eLTE Rapid
Deployment Broadband Trunking System (eLTE Rapid)
significantly reduces network deployment time with
easy assembly. This system ensures that first responders
communicate quickly, anytime, anywhere.

eLTE Rapid

eLTE Rapid
eLTE Rapid
Laptop
(eOMC and eDC)
eLTE Rapid Deployment

Broadband Trunking System
Power distribution
Switch
eMDC
eSCN231
Prevent lost time due to broken communications in emergencies or weak signals during event, Huaweis eLTE
Rapid can be deployed in 15 minutes for immediate communications. With its small footprint, eLTE Rapid
increases network deployment flexibility and ensures that first responders can communicate anytime, anywhere.
eRRU
High-level integration and wide, flexible coverage

Integrates baseband processing, packet data switching, and scheduling functions into a 2U-height device.
Battery
Provides, schedules, and manages voice, data, and video services. Routes and manages user data.
Signal Cable
Power Cable
Requires only one unit to cover an area up to 50 square km.

For special coverage requirements, one RRU can connect to an eLTE Rapid for a maximum distance of 10 km,
providing significant coverage flexibility.
Fast deployment for first responders and wide environmental adaptability
Compact design allows operators to quickly deploy a complete broadband trunking system a crucial
requirement for emergency response.
Requires no parameter configuration, no on-site wireless networking planning, no on-site account, no IP
configuration or pre-programmed group, with typical deployment in 15 minutes.
Back Pack Mode
Installs inside vehicles without modifying the vehicles (vehicle mode) to set up emergency communications in
accident locations or for mobile communications. Can also be carried on foot (back-pack mode).
Provides multiple frequencies, including 400 MHz/1.8 GHz, and multiple bandwidths such as 5 MHz, 10 MHz,
and 20 MHz, to help vertical industries deploy networks conveniently.
Optimized base station with the latest trunking services
High Gain Antenna
Delivers 320 Mbit/s maximum data throughput.

Enable fast setup: group call setup time < 300 ms; pre-emptive call setup time < 150 ms.
Antenna Bracket
Features built-in video, data acquisition, and GIS services.

Antenna Box
Vehicle Mode
Main Box
RF Box
Power Supply Box
41
42

eLTE Rapid

eLTE Rapid
Specifications
Application Scenarios
Main Events Security
Features and Benefits

P2P voice call
P2P video call
Performance specifications
LTE TDD 400M: 380450 MHz ,
LTE Operating Bands
1.8G : 17851805 MHz
Maximum users
100
Emergency call
Maximum simultaneous voice calls
40
High-speed data service
Maximum simultaneous video calls
20
Trunking group call
Short data service

State message
Hardware specifications
Video surveillance
Portable terminal video sending
Main box (Mandatory)
Video projection
Disasters Relief
Video distribution
Combined services collaboration
Radio unit box (Mandatory)
GIS
Call group scanning
Power supply box (Optional )
Floor pre-emption
Late entry
Forced release
Break-in by a dispatching console
Time-limit call
Antenna box (Optional )

Vehicle Mode
Group and user status display

Mobile City Security
Dynamic regrouping
Call forward
559 mm x 568 mm x 286 mm
Weight
35 kg (standard configuration)
559 mm x 568 mm x 286 mm
Weight
35 kg
559 mm x 568 mm x 286 mm
Weight
35 kg
285 mm x 469 mm x 1458 mm
Weight
17 kg
Dimensions requirement
1500 mm x 700 mm x 1200mm
Power specifications
Alias display of group and user

Broadcast call
Input power
220V AC; Voltage range: 100V AC to 240V AC
Power consumption
< 580W (400 MHz)

< 530W (1.8 GHz)
Call data record
Environmental specifications
Temporary group call

Talking party identification
Working temperature
Barring of incoming/outgoing calls

Remotely enable/disable terminal
Audio/Video recording
43
Protection level
-20 to +55
During device delivery, the protection level is IP44 as the cover of the box
holding the cabinet and device panels are fixedly installed.
During device operation, the protection level is IP23 as the cover of the box
holding the cabinet and device panels are removed or open.
MTBF
100,000 hours
MTTR
0.5 hours
System starting time
< 5 minutes
44
2014
HUAWEI TECHNOLOGIES CO., LTD.

Bantian, Longgang District
Shenzhen518129, P. R. China
Tel:+86-755-28780808

Huawei ELTE Broadband Trunking Products

Uploaded by

Copyright:

Available Formats

Huawei ELTE Broadband Trunking Products

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Huawei ELTE Broadband Trunking Products

Uploaded by

Copyright:

Available Formats

Huawei eLTE

Broadband Trunking Products

Single Site Network

eCNS210 & eCNS230

eApp & Hardware

Huawei offers many types of terminals, including handset,

Huawei eLTE Broadband Trunking Products

Huawei eLTE Broadband Trunking Products

GPS, Determines position with an accuracy within 10m in open terrain

The development of Mobile Broadband (MBB) has created a need

3.5mm Headphone Jack

Dedicated Camera Button

Private call function

Voice tuning Knob

2.4-inch TFT Display

High-Output LED Flash

5-Megapixel Camera for EP680

Emergency Call Button

Withstands multiple 1.5m drops per MIL STD 810F

Huawei eLTE Broadband Trunking Products

Huawei eLTE Broadband Trunking Products

LTE-TDD 400 MHz: 380 to 470 MHz

LTE-TDD 1.4 GHz: 1,447 to 1,467 MHz

400 MHz band: 3 MHz/5 MHz/10 MHz/20 MHz

1.4 GHz band: 5 MHz/10 MHz/20 MHz

Supported (400 MHz to 470 MHz)

1.8 GHz frequency band: 252 dBm

Li-ion, 3.7V, 3,000 mAH

Trunking mode (5:5:90) > 29 hours

Windows Media Video (WMV) 10, WMV 9, H.264

CIF (176 x 144) resolution at 25 frames per second (fps)

MIL STD 810F

Wi-Fi 802.11 b/g/n

Bluetooth v1.2/2.0/2.0 + EDR

Mini USB 2.0

2.4 inch QVGA 240 x 320 TFT

Rear camera: 5 megapixels

Rear camera: 1.3 megapixels

MCP (1 GB DDR + 8 GB EMMC)

MCP (1 GB DDR + 4 GB EMMC)

154 mm x 62.5 mm x 34.6 mm (not including external antenna)

380g (including battery)

Software-based SIM card

Huawei eLTE Broadband Trunking Products

Huawei eLTE Broadband Trunking Products

Remote terminal activation and deactivation

between response personnel.

interfaces permit customizations to handle specialized requirements.

Professional Performance for Timely Response

Dedicated PTT Button

Direct Mode Operation (DMO)

recognizable voice in 100-dB-noise environments

Voice tuning Knob

Live Video Improves Efficiency

High Reliability in the Harshest Environments

3.5 mm Headphone Jack

Huawei eLTE Broadband Trunking Products

Huawei eLTE Broadband Trunking Products

LI-ion, 3.7v, 4000mAH

Trunking mode (5:5:90) > 32 hours