Quality Progress | May 2013

Putting Best Practices to Work

QUALITY PROGRESS

Managing

manage risk

Risk
Find firmer footing
with a well-balanced
data management
plan p. 16
Plus:
Corral your documents
and data p. 22
Team up to improve
efficiency p. 28

www.qualityprogress.com | May 2013

Get Emotional:
Understand Its Role
In the Workplace
p. 34

Volume 46/Number 5

Once you see it, you can improve it.

with Value Stream Mapping

www.qualitycompanion.com

^nterprise Quality &

PDM

NCMR

QMS Software
ISO/TS FMEA

ISO

Nonconforming

Quality

ISO 9000 PDM

Quality Software ISO 13485
NCM

QMS

Nonconforming Materials

TL 9001

CAPA

ISO

Quality Compliance Software Manufacturing

Quality Assurance

Product Data Management

Manufacturing

Supplier &
Materials

Quality Compliance

Process

Nonconformance

Discrete

Corrective Actions

Quality

Discrete ERP

Manufacturing
Quality Compliance

QMS Software
Discrete

Risk Assessment

Nonconforming Materials
ISO 9000

FMEA

ERP

ISO/TS
MRB
QMS Software

NCM

ISO 9000

Discrete

Calibration

ISO/TS 16949

ISO/TS

ISO 13485

FMEA

Supplier &
Materials

AS9100

Compliance

Corrective Actions

AS9100

TL 9001

Nonconforming

FMEA

Actions
Inspections Corrective
Manufacturing

Quality
ISO

ISO 9000 Quality Assurance

Risk Assessment

Calibration

Process
ISO/TS

ISO

Product Data
Management
ISO/TS 16949

ERP

ISO 13485
Receiving
Inspections

CAPA

Calibration

Quality

Quality Software

Process

Supplier

Quality Assurance

MRB

CAPA

PDM

ISO/TS
Supplier

TL 9001

Product Data Management

Materials

Inspections

Nonconformance
FMEA Quality Systems Software Receiving

Quality Management Software Supplier Rating

MES

CAPA QMS Software

Manufacturing

Product Data Management

Calibration

Quality

QMS

Process

Supplier
& Materials QMS QMS Software

Calibration

ISO/TS

QMS Software

Quality
FMEA
Manufacturing
ISO 13485
Rating

CAPA
ISO/TS

QMS

Calibration

ISO 13485
PDM

AS9100

Quality

Calibration

Quality Compliance QMS PDM Manufacturing

Receiving Nonconformance Quality Assurance
Materials
Compliance ERP
CAPA
ISO

Process

ISO 13485

ISO/TS
MRB

TL 9001

Process

...st VALUE
: Integrated modules for Quality and FDA Compliance
Management:
CAPAange ManagementRisk Assessment ...and more!
Risk Management
in tQuality System

events

Flexible: Leading edgexible workow adapts to all business

processes, witt programming
: Integrates wit3rd party business systems
Scalable: Readily adapts to enterprise environments, and
deployments
Supplier Management: Collaborates wit^rs troug^er
Business Intelligence
in
decision-making witreds of congurable carts and reports

800-354-4476 [email protected]

www.etq.com/quality

The ASQ

Global
State of
Quality

R e s e arc h

The Worlds First Research Study

on the Global State of Quality
The ASQ Global State of Quality Research is the first comprehensive view of quality
and continuous improvement worldwide. The initial report will be unveiled at the 2013
World Conference on Quality and Improvement in Indianapolis, IN, May 6-8, 2013.
The report reveals benchmark data gathered from 2,000 organizations in 22 countries,
and can help you assess your quality management advancements compared to other
organizations in your region, industry, and economic sector.

The unveiling takes place during a session on Tuesday, May 7, 2013 at 4 p.m.
Afterward, the report will be available for download
online at asq.org/research.
training

CERTIFICATION

CONFERENCEs

MEMBERSHIP

PUBLICATIONS

Contents
Putting Best Practices to Work | May 2013 | www.qualityprogress.com

FEATURES
16

16

DATA MANAGEMENT

Balancing Act

Better management of quality data can help organizations identify

continuous improvement opportunities, reduce risk and improve
product quality.

by Eda Ross Montgomery and Justin Neway

22

Avoiding an Avalanche

Lessen liability and reduce risk by getting a better handle on

data and documents within your quality management system.

by Greg Milliken

28

PROCESS IMPROVEMENT

What Makes You Tick?

Break up operational logjams within your organization

to boost business performance and better serve customers.

by H.F. Ken Machado

34

EMOTIONAL INTELLIGENCE

Mood Righting

High levels of emotional intelligence create a workforce that

is more engaged, dedicated and productive, a recent study reveals.

Only @

www.qualityprogress.com

by Scott Thor

Hearing Aid

Listen to the authors of

Balancing Act (pp. 16-21)
discuss the importance of
better quality data management.
Also read two exclusive online
sidebars that expand on this
months cover article.

More From Thor

Two additional tables containing

correlation and regression
results from the study on
emotional intelligence and
work engagement, the
subject of Scott Thors
Mood Righting(pp. 34-40).

Read All About It

34

Get the latest Quality News

Today headlines.

Popularity Contest

Check out what QP readers

have clicked on most often.

QP

DEPARTMENTS
6

LogOn

Expert Answers

12

Sustaining lean Six Sigma

project results.

QUALITY PROGRESS

How an IT firm advanced with

lean Six Sigma.

Mail

Quality Progress/ASQ
600 N. Plankinton Ave.
Milwaukee, WI 53203
Telephone
Fax
800-248-1946 414-272-1734
414-272-8575

Keeping Current

Lessons from the Lululemon recall.

Statistics pioneer Box passes away.

Email

15

Mr. Pareto Head

58

QP Toolbox

60

QP Reviews

12

42
45

Up Front

Data disarray.

Innovation Imperative
Controlling risk within the
innovation process.

Quality in the
First Person

The mistake of managing

with an iron fist.

46

Author Guidelines

46

Standards Outlook

48

Statistics Roundtable

54

3.4 per Million

57

Career Corner

64

One Good Idea

The expanding importance of

risk management.
Finding just the right
improvement method.

Estimation in a roundabout way.

Take control of your brand
and your career.
Clowning around can help.

Special section:
ASQ enterprise and
site members p. 50

NEXT MONTH

- know your options

How to address inconsistencies in
supplier delivery.

- solid supply chain

Project provides HIV and AIDS
assistance to ailing Kenyans.

ASQs Vision: By making quality a global priority, an organizational imperative and

a personal ethic, the American Society for Quality becomes the community for everyone
who seeks quality technology, concepts or tools to improve themselves and their world.
Quality Progress (ISSN 0033-524X) is published monthly by the American Society for Quality, 600 N. Plankinton Ave., Milwaukee, WI 53203.
Editorial and advertising offices: 414-272-8575. Periodicals postage paid at Milwaukee, WI, and at additional mailing offices. Institutional
subscriptions are held in the name of a company, corporation, government agency or library. Requests for back issues must be prepaid and
are based on availability: ASQ members $15 per copy; nonmembers $23 per copy. Canadian GST #128717618, Canadian Publications Mail
Agreement #40030175. Canada Post: Return undeliverables to 2835 Kew Drive, Windsor, ON N8T 3B7. Prices are subject to change without
prior notification. 2013 by ASQ. No claim for missing issues will be accepted after three months following the month of publication of the
issue for domestic addresses and six months for Canadian and international addresses.
Postmaster: Please send address changes to the American Society for Quality, PO Box 3005, Milwaukee, WI 53201-3005. Printed in USA.

QP www.qualityprogress.com

Article Submissions

Quality Progress is a peer-reviewed publication with 85% of its feature articles written
by quality professionals. For information
about submitting an article, call Valerie
Ellifson at 800-248-1946 x7373, or email
[email protected].

COLUMNS
5

Follow protocol of first initial and full last

name followed by @asq.org (for example,
[email protected]).

To learn more about the manuscript review

process, helpful hints before submitting a
manuscript and QPs 2013 editorial planner,
click on Author Guidelines at www.
qualityprogress.com under Tools and
Resources."

Photocopying Authorization

Authorization to photocopy items for

internal or personal use or the internal or
personal use of specific clients is granted by
Quality Progress provided the fee of $1 per
copy is paid to ASQ or the Copyright Clearance Center, 222 Rosewood Drive, Danvers,
MA 01923, 978-750-8400. Copying for other
purposes requires the express permission
of Quality Progress. For permission, write
Quality Progress, PO Box 3005, Milwaukee,
WI 53201-3005, call 414-272-8575 x7406, fax
414-272-1734 or email [email protected].

Photocopies, Reprints
And Microform

Article photocopies are available from ASQ

at 800-248-1946. To purchase bulk reprints
(more than 100), contact Barbara Mitrovic at
ASQ, 800-248-1946. For microform, contact
ProQuest Information and Learning, 300 N.
Zeeb Road, Ann Arbor, MI 48106, 800-5210600 x2888, international 734-761-4700,
www.il.proquest.com.

Membership and Subscriptions

For more than 60 years, ASQ has been the

worldwide provider of information and learning opportunities related to quality. In addition, ASQ membership offers information,
networking, certification and educational
opportunities to help quality professionals obtain practical solutions to the many
problems they face each day. Subscriptions
to Quality Progress are one of the many
benefits of ASQ membership. To join, call
800-248-1946 or see information and an
application on p. 41.

List Rentals

Orders for ASQs member and nonmember

buyer lists can be purchased by contacting
Michael Costantino at the Infogroup/Edith
Roman List Management Co., 845-731-2748
or fax 845-620-9035.

upfront

QP

QUALITY PROGRESS

Data Disarray
Get your house in order to reduce risk

Executive Editor and

Associate Publisher
Seiche Sanders

Associate Editor
Mark Edmund

Assistant Editor
Dont you just hate it when your house gets messyyou look away for just a sec-

Amanda Hankel

ond, and now there are stacks of mail in three separate places, clothes on the floor of

manuscript Coordinator

the closet, and dishes that need to be put away.

An unkempt house may not make you susceptible to dire risk (unless there are banana peels littering the floor), but messy data and disorganized data management processes are a serious threat to organizations livelihoods. And its frighteningly common.
Data management as a crucial ingredient for mitigating risk is at the heart of this
months cover story, Balancing Act, p. 16. Collaboration and control of documents
and information are necessary to ensure silos are broken down and communication is
optimized. The authors provide tips for streamlining data management, one of which is
technology:

Valerie Ellifson

contributing EDITOR
Megan Schmidt

COPY EDITOR
Susan E. Daniels

Art Director
Mary Uttech

Graphic Designer
Sandy Wyss

Production

Spreadsheets and paper records will never be completely eliminated, but the right
technology system helps significantly reduce the errors and risks associated with these
components, they wrote. It enables companies to leverage existing IT systems in a way
that invites management, IT, quality and manufacturing to support important risk mitigation initiatives.
Document control is also an important aspect of reduced risk and increased productivity. Organizations today are overloaded with data and documentation, and need to take
a step back to get their arms around the magnitude of it, and figure out how to manage it
best. In Avoiding an Avalanche, p. 22, the author provides very specific tips for making
records electronic and storing them in an organized and searchable fashion. Its amazing
the effect careful data management can have.
On a sad note, QP editorial review board member Christine Robinson passed away
last month after a brave battle with pancreatic cancer. For more than two decades,
Christine offered her time and expertise in reviewing countless manuscripts and maintaining the editorial integrity and reputation readers expect and value from QP. She
will be greatly missed. QP

Cathy Milquet

Advertising production
Barbara Mitrovic

Digital Production specialist

Laura Franceschi

Media sales

Naylor LLC
Lou Brandow
Krys DAntonio
Norbert Musial
Rob Shafer
Donnie Tuttle (ASQ TV)

Media sales Administrator

Kathy Thomas

Marketing Administrator
Matt Meinholz

Editorial offices
Phone: 414-272-8575
Fax: 414-272-1734

Advertising offices
Phone: 866-277-5666

ASQ administration
CEO

Paul E. Borawski

Managing Directors

Seiche Sanders
Editor

Dont forget to watch the new episode

Julie Gabelmann
Brian J. LeHouillier
Michelle Mason
Laurel Nelson-Rowe

To promote discussion of issues in the field of quality and

ensure coverage of all responsible points of view, Quality
Progress publishes articles representing conflicting and minority views. Opinions expressed are those of the authors and not
necessarily of ASQ or Quality Progress. Use of the ASQ logo in
advertisements does not necessarily constitute endorsement of
that particular product or service by ASQ.

May 2013 QP

logon
+Seen&Heard
The art of measurement
Peter Merrill's March 2013 column on
food safety, Seize the Opportunity,
(pp. 44-45) deserves huge kudos for
articulating the fundamental dichotomy
that our society faces: cheap and quick
initiatives that generate huge return on
capital employed, yet can have irreversible damage and consequences to the
general health of society. Well done,
Peter.
Alex T.C. Lau
Whitby, Ontario

Acting on feedback
In response to the One Good Idea article,
Survey Fatigue (October 2012, p. 87):
Joel Pecoraro writes about ways to
improve customer response rates to
surveys and points out several relevant
questions. However, one of the most
important points was not raised: Provide
feedback to customers responding to
the surveyindividually or notinforming them of the measures taken to introduce improvements based on customer
survey responses. This is the only way to
ensure that they will answer your next
survey.
Basilio V. Dagnino
Rio de Janeiro, Brazil

Following up on LSS
In response to The Right Blend, (February 2013, pp. 18-26): Good article on
lean Six Sigma (LSS) implementation in
an environment other than manufacturing. I am curious about the following:
1. How long did it take for the project
to go through the define, measure,
analyze, improve and control (DMAIC)
process? Would it have been pos-

QP www.qualityprogress.com

sible to just use value stream maps

and spaghetti diagrams to achieve the
same results in a shorter amount of
time?
2. After project completion in 2011, have
results been sustained since the Black
Belt left the project?
3. What happened to the one full-time
employee (FTE) that was reduced as
a result of a successful LSS project?
How did you ensure the accuracy
of the time study if the technicians
perceived the purpose of the project
was to reduce the number of FTEs?
James Gao
Edmonton, Alberta
Authors response:
1. It took six months to go through
DMAIC. Regarding the second part of
the question, many other tools, such
as time and motion studies, value
analysis, Pareto and load leveling, were
used because they were necessary
to assess all processes and apply appropriate solutions.
2. Since project completion, results have
been sustained with great success.
This is accomplished through quarterly
scored audits during which any new
opportunities for improvement are
identified and current status is evaluated.
3. The FTE was laid off. Regarding the
second part of the question, we did
not mislead anyone, but we also did
not present the project as a head
count reduction project. Our project
scope was bigger than that, as you
can see from the article.
Vera Vanicek
Aventura, FL

StayConnected
Find the latest news, quips and targeted
content from QP and its staff

Executive Editor & Associate

Publisher Seiche Sanders:
@ASQ_Seiche

Associate Editor Mark Edmund:

@ASQ_Mark
Assistant Editor Amanda Hankel:
@ASQ_Amanda
Contributing Editor Megan Schmidt:
@ASQ_Megan

[email protected]
www.facebook.com/
groups/43461176682
www.linkedin.com/groups/qualityprogress-magazine-asq-1878386

QP
popular

s Most
articles

(All URLs case sensitive)

1. Likert Scales and Data Analyses: Analyses of ordinal data

are not always straightforward.
(http://bit.ly/likertscales)
2. Risky Business: Don't let
risk stop you from innovating.
(http://bit.ly/riskbusiness)
3. Crunching the Numbers: A
look at how the 2012 Salary
Survey data were compiled.
(http://bit.ly/crunchnumbers)
4. Corrective vs. Preventive
Action: Don't be confused
about the difference between
corrective and preventive
action. (http://bit.ly/
correctvsprevent)

QP

QP

Online
Extras@

QUALITY PROGRESS

www.qualityprogress.com
PAST CHAIR

More on collaboration
Read two online sidebars that accompany the feature article, Balancing Act, (pp. 1621) and view an additional figure. Also, in this months Author Audio, listen in as authors
Eda Ross Montgomery and Justin Neway talk more about how collaboration among
quality and manufacturing teams, along with the use of technology, is key to managing
quality data and reducing risk.

Get smart with your emotions

CHAIR

John C. Timmerman, Gallup Inc.

CHAIR-ELECT

Stephen K. Hacker, Transformation Systems

International

TREASURER

View two additional tables that round out Scott Thors article, Mood Righting (pp. 3440), about using emotional intelligence to increase work engagement.

Chava Scher, RAFAELAdvanced Defense Systems

(retired)

PARLIAMENTARIAN
Karla Riesinger, ASQ

Quick Poll RESULTS

Each month at www.qualityprogress.com, visitors can take an informal survey. Here are
the numbers from last months Quick Poll:
How does telecommuting affect business?
It depends on the organization.
Its a valuable employee benefit with few drawbacks.
Its hurtful in terms of productivity and innovation.

James J. Rooney, ABS Consulting, Global

Government Division

65.2%
21.7%
13%

Visit www.qualityprogress.com for the latest question:

What poses the greatest risk to todays organizations?
Technology.
Data management.
Market uncertainty.

DIRECTORS

Heather L. Crawford, Apollo Endosurgery

Raymond R. Crawford, Parsons Brinckerhoff
Ha Dao, Emerson Climate Technologies Inc.
Gary N. Gehring, Saskatchewan Ministry of
Governmental Relations
Kathleen Jennison Goonan, M.D., Goonan
Performance Strategies
Eric A. Hayler, BMW Manufacturing Co.
James M. Loseke, Sargento Foods Inc.
Joanne D. Mayo
Elas Monreal, Industrial Tool Die and Engineering
Richard A. Perlman, Bayer HealthCare
Steven J. Schuelka, Calumet College
Daniel E. Sniezek, Lockheed Martin (retired)
G. Geoffrey Vining, Virginia Tech Department of
Statistics
Alejandra Vicenttin, Alejandra Vicenttin Advisors
Bharat Wakhlu, Tata Services Ltd., a division of Tata Sons
J. Eric Whichard, JE Whichard and Associates

QP EDITORIAL REVIEW BOARD

Randy Brull, chair

QualityNewsToday

Administrative Committee

(All URLs case sensitive)

Technical reviewers

Recent headlines from ASQs global news service

Yoga Move Reveals Sheer Extent of Lululemons Mistake
Lululemon Athletica Inc. recalled 17% of its womens pants after they were found to be
too sheer when the fabric is stretched in multiple directions, as it is during a routine
downward dog yoga move. (http://bit.ly/yogamove)
Mitsubishis Melting Lithium-ion Battery
Mitsubishi Motors Corp. said that a defect was found in a lithium-ion battery pack used
in a plug-in hybrid vehicle, where the battery was partly melted due to heat it produced.
(http://bit.ly/meltingbattery)

Brady Boggs, Randy Brull, Jane Campanizzi, Larry

Haugh, Jim Jaquess, Gary MacLean,
R. Dan Reid, Richard Stump
Andy Barnett, David Bonyuet, David Burger, Bernie
Carpenter, L.N. Prabhu Chandrasekaran, Ken Cogan,
Linda Cubalchini-Travis, Ahmad Elshennawy, Mark
Gavoor, Kunita Gear, Daniel Gold, T. Gourishankar,
Roberto Guzman, Ellen Hardy, Lynne Hare, Ray
Klotz, Tom Kubiak, William LaFollette, Pradip Mehta,
Larry Picciano, Gene Placzkowski, Tony Polito, Peter
Pylipow, John Richards, James Rooney, Brian Scullin,
Amitava Sengupta, A.V. Srinivas, Joe Tunner, Manu
Vora, Keith Wagoner, Jack Westfall, Doron Zilbershtein

Want the latest quality-related news and analysis?

The QNT Weekly e-newsletter delivers it every Friday.
Subscribe now at http://email.asq.org/subscribe/qntwk.

May 2013 QP

expertanswe
Leveraging lean

the customer experience?

Q: I am looking for case studies on successful lean programs that give details on
how to undertake a lean program at an IT

metrics (financial, operational and customer

Can we do this while driving scale into

the business?

satisfaction), were deliberate about identifying root cause issues, and figured out the

Where do we put our best resources to

products and services company, and how

drive the most impact for our customers?

organizations faced and overcame typical

We laid out a value stream map of the

smartest way to solve them with our front

line.
We conducted pilots and carefully mea-

challenges. For example, how do you mea-

business and identified some high-profile

sured the results before full deployment.

sure, in dollars or cost of sales, a bad senior

pain points the organization could rally

The best control plan we devised was to

management decision?

around. Out of those discussions, some

get the front line engaged in the process up

high-profile initiatives emerged that were

front. After they bought into it, they would

closely aligned with our strategic goals,

enforce itminimizing the need for formal

objectives and key metrics:

documentation and audits.

Santosh Mishra
New Westminster, British Columbia
A: The best example I can provide in which

Becoming proactive in service man-

Cbeyond employees took notice. We were

an IT services company is leveraging lean

agement to monitor and troubleshoot

generating excitement. The projects demon-

Six Sigma (LSS) process improvement prin-

circuits.

strated that achieving scale and customer

ciples is at my own organization, Cbeyond

Redesigning the interactive voice recog-

Communications. We are a $500 million IT

nition platform to make it more custom-

Following a process improvement method

and communications service organization

er-friendly and reduce transfer calls.

made sense and could be successful. We

providing voice, data and applications for

Introducing computer telephony integra-

satisfaction were not mutually exclusive.

didnt even call it LSS. The method was

small and mid-size businesses. We are fairly

tion in the call center to provide immedi-

becoming part of the culture. Employees first

young (12 years old), fast-moving, have

ate screen pops for agents to identify

started speaking it; then they started practic-

a highly entrepreneurial culture and are

and validate the caller, and save 30

ing ittaking deliberate action.

customer-centric.

seconds in the process on 750,000 calls.

Our LSS journey started in 2010 with our

In essence, we were pulling for the

The larger initiatives started a wave of

smaller initiatives. We quit talking about is-

key thought leaders from customer experi-

creation of meaningful initiativesnot

sues in terms of: What is the trouble ticket

ence, operations, IT and process excellence

pushing projects through the organization.

rate? or Why isnt IT automating this for

getting in a room and asking some difficult

We set up teams,

questions:

created business

What is standing in our way of enhancing

cases with key

Project portfolio process

Stage one
Identify initial
projects
Business alignment
framework

Goals

/ figure 1

Stage two

Stage three

Stage four

Validate
projects

Prioritize
projects

Charter
projects

Strategic
questions

Talk to customers
Identify key metrics
and pain points
Strategic
(early in the cycle)

Project
prioritization
scorecard

Business alignment
framework / figure 2

Project charter
template
Define problem

Strategy

High potential
areas

High potential

Projects

Project
Project
Project

High potential

Project
Project

State the goal

Define the scope
Tactical
(later in the cycle)

Pulling for the creation of projects that are aligned with our goals, strategies and metrics.
EBITDA = earnings before interest, taxes, depreciation and amortization

Source: Peter Sherman, Pick Your Spots, Quality Progress, September 2012, pp. 36-42.

QP www.qualityprogress.com

Source: Peter Sherman, Pick Your Spots, Quality Progress, September 2012, pp. 36-42.

rs
us? Now, we were asking: Whats the prob-

Making the case for change (the business

Its a process

lem? Are we in control? How capable is the

case) is one of the most difficult things for

The portfolio process and business align-

process? That was the tipping point.

people to get comfortable with. To help

ment frameworks help us tremendously

employees, I conduct mini project charting

to focus. We combine these frameworks

Overcoming challenges

workshops. We cover the elements of pre-

with a formal process of documenting our

In 2011, we got serious about deploying the

paring a basic business case: identifying key

yearly commitments with measurable goals

program. We put together the infrastructure

assumptions and drivers, quantifying costs

and timeframes. Managers review these

using the LSS framework: We formalized our

of poor quality, and projecting savings or

commitments with their employees twice

Champion, developed a portfolio process

revenue based on improvements. We learn

a year.

(Figure 1) that uses a business alignment

how to prepare some basic metrics, such as

framework (Figure 2) to identify the right

return on investment, payback period and

heads facilitate workout sessions with em-

projects, and a portfolio tracking system to

break-even analysis.

ployee groups. One activity is called start-

measure results.
We customized the training around

The other program we started is a

At the beginning of the year, department

stop-continue. We ask ourselves: What

decision-making boot camp to help front-

should weas an organizationbe starting,

Cbeyonds business, tailored tools that

line managers and directors make better

stopping and continuing? There are always

would fit our needs, and provided ongo-

decisions. We educate participants on the

new ideas. Identifying the things we should

ing coaching and mentoring. Because our

three basic decision-making styles; problem-

stop doing is the most challenging part.

process excellence department is very lean

solving skills; decision-making tools (risk

Throughout the year, senior leaders

(only two Six Sigma Black Belts), we had

vs. uncertainty, calculating risk levels and

routinely conduct walkaboutsinformal

to scale ourselves. We do this by formally

linking cause and effect) and conduct team

meetings with small groups of employees.

screening candidates who want to enroll

exercises based on actual Cbeyond issues.

They ask: What are the top three things

in Cbeyonds lean Six Sigma Green Belt

The other main challenge we face is

youre working on? Recognizing the need

certification program. One key criterion is to

maintaining our levels of energy, focus and

to keep momentum, our department heads

submit a project charter signed off on by the

commitment, particularly in the midst of

are starting to conduct weekly team reviews

candidates project sponsor. Projects must

significant change. Cbeyond is going through

with their teams, asking questions such as:

be completed within one year of training.

a major transformation with its products and

What progress did we make this week?

This process ensures the right candidates

services. Employees want to know where

What supported us and our work this

and projects are pulled into the program.

were going as an organization. They need

Employees are seeing things through a

to feel theres a real commitment to the

new set of eyes, asking different questions,

destination and that the aspiration isnt just

learning to challenge conventional wisdom

the flavor of the month.

through data and seizing opportunities.

One of the most difficult challenges is get-

Perhaps most importantly, they need

leaders to help them connect the dots so

week?
What setbacks did we have this week?
How can we learn from them?
Did we affect our partners or customers
positively this week? How will we do so
next week?

ting employees to adopt a business mindset.

they know how their work supports the goal.

Lets face it, a pile of numbers is just thata

Weve found that employees will bring more

a lot of energy, focus and commitment.

Were not perfect by any means. It takes

pile. Without contextthe surrounding

energy, focus and commitment to leaders

Were in the third inning of a nine-inning

informationand analysis, they mean noth-

who can tell a compelling story about our

game. Like Brad Pitt said in the movie

ing. Putting things in context means asking

challenging journey from where we are to

Moneyball: Its a process; its a process;

questions such as: Whats the problem were

where we want to be. There are lots of shiny

its a process.

trying to solve? Whats the impact? How long

objectsnew directives, different policies

has this been occurring? Where is it happen-

and technology. We cant afford to chase

Director of process excellence

inginternally or externally with our custom-

these shiny objects because well waste

Cbeyond Communications

ers? What is the cost of doing nothing?

time and resources.

Peter J. Sherman

Atlanta

May 2013 QP

QUALITY COUNCIL OF INDIANA

CQIA
PRIMER

CSSBB
PRIMER

CQE
PRIMER

CQT
PRIMER

PRIMERS

CSQE
PRIMER

CMQ
PRIMER

CRE
PRIMER

LSS
PRIMER

CQI
PRIMER

CCT
PRIMER

CQA
PRIMER

CSSGB
PRIMER

CQPA
PRIMER

Our Primers contain study material for the current ASQ bodies of
knowledge plus sample questions and answers. The Primers may be
taken into the exam. The completeness of our materials makes them
the most widely used texts for Certification Training.

SOLUTION TEXTS

Quality Council of Indiana offers detailed solutions to all

questions presented in the corresponding Primer.

CD-ROMS

QCI offers user-friendly interactive software to assist students preparing

for ASQ examinations. Each CD contains 1000 total questions.
Examinations are timed and summarized graphically. A help file provides
explanations and references. The CDs run on Windows XP and newer.

CQE
CSSGB

CQA

Mail Orders
Information
Fax Orders
Quality Council
812-533-4215
812-533-4216
of Indiana
Telephone Orders
Order Department
800-660-4215
602 W. Paris Ave.
Internet Orders
W. Terre Haute, IN 47885-1124
www.qualitycouncil.com

Jurans
Quality
Handbook

Implementing
Six
Sigma

The Quality
Technicians
Handbook

6th Edition

2nd Edition

6th Edition

The essential quality reference

for most ASQ exams

A great CSSBB reference

Great for CQT and CQI exams.

by Forrest W. Breyfogle, III

by Juran & De Feo

En Espaol

CSSGB
PRIMER

by Gary K. Griffith

Spanish
Green Belt

Quality
Dictionary

The Spanish version of the

CSSGB Primer.

by Tracy Omdahl

LSS Primer

RAM
Dictionary

More than 2500 definitions.

Great for any ASQ certification.

The Lean Six Sigma Primer is

written to a QCI BoK. There are
more case studies and lean content
than in any other QCI products. 400
questions are included. A solution
text is also available.

by Tracy Omdahl

Contains 2800 definitions.

Helpful for Reliability and
Quality Engineers.

ISO 9001 Internal

Auditing Primer

ISO Primer
by Bensley & Wortman

by Greg Wies & Bert Scali

A convenient book for training internal

auditors to the ISO 9001 expectations.
An instructor CD is available.

Reliability & Maintenance

Analyst CD
by Bryan Dodson

Solve your Weibull, reliability, warranty, Bayesian &

Maintenance, prediction & estimation problems.

Measurement Analyst CD
Performs all measurements required in the AIAG manual.
Contains ANOVA methods and excellent graphs.
Site and global license available!!!

Used by Chrysler, ITT, FedEx, Ford,

TRW, GM, HP, U.S. Postal Service

ISO

Presents a thorough treatment

of the ISO implementation and
documentation process.
There are generic manuals on
the CD.

Quality System
Handbook
by Edenborough

QSH

Details the selection,

organization, and writing
of quality documents.
The disk contains
procedures and work
instructions.

keepingcurre
recalls

Back on Track

Yoga pants maker aims to put embarrassing recall behind it

The high-end athletic wear maker Lululemon

thinks it has nipped its yoga pants problems
in the bud, already implementing tighter testing protocols and oversight to prevent quality
issues from rearing their ugly heads again.
But many still point to Lululemons missteps that forced the recall of its black luon
pants and crops as a reminder to never sit
still with testing and quality processes, and
always pay close attention to supply chain
management strategy.
Everyone has (these issues), even big
companies, said Sam Poser, an analyst at
Sterne, Agee & Leach brokerage firm. But
I dont think its a supply chain issue per se.
Its a sitting-back-on-your-laurels issue and
saying, Were doing it well enough. Usually
these issues are symptoms of some sort
of complacency. It happens to the best of
companies.1
Lululemon was forced to pull 17% of its
yoga pants off store shelves in late March
because the material proved to be too sheer.
The embarrassing recall was first blamed
on one of Lululemons suppliers, but the
company later admitted that quality control
was lacking and testing protocols were
incomplete for some of the pants fabric in
question.2
In a press release last month, Lululemon
said it had already taken steps prior to the
black luon fabric issue to bolster its internal
product expertise, including the addition of
senior-level capabilities in quality, raw materials and production. This new team was
instrumental in determining the root cause
of the luon issue and has initiated three work
streams to address what we believe are the
contributing causes:
Testing and processes: A quality team is
assessing all luon products in the production
pipeline according to newly implemented

12 QP www.qualityprogress.com

rigorous testing and quality processes that

includes revised specifications for modulus
(stretch), weight and tolerances.
Factory oversight: Employees have been
stationed in factories to monitor and test
products and will educate internal teams
and manufacturing partners on new testing
standards and methods.

Leadership and structure: The company

is building a stronger internal structure with
new leadership and cross-functional team capability to create a more robust organization
to support its long-term growth strategy.3
The recall of the pants, which cost $70 to
$100 a pair, has taken a toll on many fronts:
The company estimated the recall will cost
as much as $67 million, and shares of the
company dropped 16% shortly after the
recall news broke. Its still uncertain how the
brands value was damaged and whether Lululemon can gain back its customers trust.4

Attention on supply chain

In todays complex and elaborate retail
environment, retailers must pay close attention to supply chain management strategy,
analysts said. Retailers can sell products in
brick-and-mortar stores, through mobile devices and on the Internet. These three points
of distribution opens a lot of supply chain

risk that wasnt there two or three years ago,

said Megan Donadio, a retail strategist with
the consulting firm Kurt Salmon.5
Good supply chain management comes
down to having a true partnership with key
suppliers, said Donadio. You must actively
manage your vendors and not let them manage you. Thats the real key to a good supply
chain strategy.6
Fast-growing firms such as Lululemon
often face supply chain issues when products
become very popular and create a strong
demand. When that surge occurs, companies
might not have a large supplier base to ensure quality products are made and delivered.
And if products arent in the stores, you
risk disappointing what is a very loyal Lululemon customer, said Brian Sozzi.7
When plotting out a supply chain strategy,
companies must make sure they have
enough suppliers to handle disruptions and
mitigate risks, while also ensuring theyre
not spread too thin across suppliers.8
REFERENCES
1. Marilyn Much, Supply Chain Issues Send Retailers to
the Drawing Board, Investors Business Daily, March
28, 2013, http://news.investors.com/business-the-newamerica/032813-649686-lululemon-and-others-see-supplychain-issues.htm.
2. Tamara Rutter, Lululemon Takes Responsibility for Failing Its
Fans, The Motley Fool, April 8, 2013, www.fool.com/
investing/general/2013/04/05/lululemon-takesresponsibility-for-failing-its-fan.aspx.
3. News Bites U.S. Markets, Lululemon Gives Update on Production Issues, April 5, 2013, http://asq.org/qualitynews/
qnt/execute/displaySetup?newsID=15724 (case sensitive).
4. Ashley Lutz, Lululemons Stringent Return Policy is Hurting
Its Business, The Business Insider, April 4, 2013, www.
businessinsider.com/lululemons-stringent-returnpolicy-2013-4.
5. Murch, Supply Chain Issues Send Retailers to the Drawing
Board, see reference 1.
6. Ibid.
7. Marilyn Much, Lululemon Luon Pants Fiasco Latest Supply
Chain Issue, Investors Business Daily, March 19, 2013,
http://news.investors.com/business/031913-648541lululemon-athletica-pants-new-supply-chain-problem.
htm?p=full.
8. Murch, Supply Chain Issues Send Retailers to the Drawing
Board, see reference 1.

nt
obituary

box, statistical
giant, passes away
George E.P. Box, considered by many to be one
of the most influential statisticians of the 20th
century, died last month at his Madison, WI,
home. He was 93.
Box was a pioneer in quality control, time
series analysis, design of experiments and
Bayesian inference, a statistical approach to
problem solving.
A native of Gravesend, England, Box earned
a bachelors degree in mathematics and statistics. While pursuing his
masters degree, he began
work at Imperial Chemical
Industries and eventually
became head of the statistical techniques research
section of the company.
He later served as visiting
professor at the University of North Carolina
and was at Princeton University as the director
of its statistical research group.
Box encouraged the creation of a journal
devoted to statistics and statistical implications. ASQ and the American Statistical Association responded to his encouragement by
creating Technometrics.
In 1960, Box moved to Madison, where
he was professor and first chairman of the
statistics department at the University of
Wisconsin (UW). His accomplishments in the
field of statistics earned him ASQs Shewhart
Medal in 1968. Box published numerous
articles and papers, and authored or coauthored many books, including Statistics for
Experimenters, Time Series Analysis: Forecasting and Control and Bayesian Inference
in Statistical Analysis.
Box was also professor emeritus at UWs
Center for Quality and Productivity Improvement. He was an honorary member of ASQ and
a three-time recipient of ASQs Brumbaugh
Award.

Whos Who in
NAME: Ron Berglund.
RESIDENCE: Canton, MI.

EDUCATION: Masters degree in

public health from the University of Michigan.

CURRENT JOB: Global quality coach, the Quality Guy,

Berglunds independent consulting company.
INTRODUCTION TO QUALITY: Berglund used W. Edwards Demings Out of
Chaos in 1980 to train his hospital staff at Saratoga Community Hospital in
Detroit to improve processes and systems.
PREVIOUS QUALITY EXPERIENCE: Quality director at Dexter Research
Inc.; senior quality consultant for Omnex, assisting companies with Six
Sigma implementation; assisted Volvo and ABB Robotics in China to develop their supply chains; adjunct graduate professor teaching graduate-level
quality and healthcare courses for 16 years at the College of Extended
Learning at Central Michigan University in Lansing.
ASQ ACTIVITIES: An ASQ fellow, Berglund is a member of technical
advisory group 176, Section 1000s Ask the Expert group, a member of a
team that developed the International Organization for Standardization/
International Workshop Agreement 1 for health services organizations,
and a member of ASQ committees.
OTHER ACTIVITIES: Fellow of the American College of Healthcare Executives, Folmer Award member of the Healthcare Financial Management
Association, and Canton, MI, precinct 38 delegate to select state candidates in general elections.
PUBLICATIONS: Berglund has written several articles that have appeared
in ASQ newsletters and publications. Most recently, Berglund updated
the chapter Conducting Successful Improvement Projects, which he
contributed to Hospital Epidemiology and Infection Control, fourth edition,
published by Lippincott Williams & Wilkins in 2011.
RECENT AWARDS: Distinguished Faculty of 2012 by the American College
of Healthcare Executives.
PERSONAL: Widower with two grown sons and three grandchildren.
FAVORITE WAYS TO RELAX: Golf, writing book reviews for ASQ, writing,
and mentoring new people in quality.
QUALITY QUOTE: Quality is common sense, but the problem is that common sense is not very common.

May 2013 QP 13

keepingcurrent
AsQnEWs
SECTION RENAMED ASQS Ozark
Section 1413 has been renamed the
Northwest Arkansas Section 1413 to
better represent the geographic area
it serves.
TEAM EXCELLENCE FORMS Intent
to submit forms for next years
International Team Excellence Award
are due July 1. For more information
on the competition, visit http://wcqi.
asq.org/team-competition/timeline.
html.

asq global state of quality research

Quality not always centralized

Quality isnt usually governed and managed

quality group.

by an organizations centralized quality group,

34% of respondents said they strongly

and measureable quality goals arent always

agree there are measureable quality goals

included in an organizations strategy and

in their strategies and goals for manage-

goals for management and support services.

Those are just a few results from ASQs
Global State of Quality Research, scheduled

use quality metrics in variable perfor-

to be released during ASQs World Confer-

mance compensation.

ence on Quality and Improvement (WCQI)

LAB ACCREDITATION Environmental laboratories can now become

accredited to TNI Volume 1 and
additional standards through a single
accreditation process offered by
ANSI-ASQ National Accreditation
Board/ACLASS. Environmental
laboratories can be accredited concurrently by ACLASS to the NELAC
Institute (TNI) Volume 1: Management and Technical Requirements for
Laboratories Performing Environmental Analysis and to ISO/IEC 17025, the
international standard for laboratory
accreditation. For more information
about the accreditation, visit www.
aclasscorp.com.

14 QP www.qualityprogress.com

ASQ partnered with the American Produc-

May 6-8 in Indianapolis. Some earlier results

tivity and Quality Center to conduct and man-

from the report include:

age the research and report. A special session

30% of respondents indicated quality

at WCQI to discuss and analyze the research

is governed and managed by a centralized

ASQ QUALITY INSTITUTE ASQ is
now offering a series of introductory quality courses July 15-17 at its
headquarters location in Milwaukee.
The ASQ Quality Institute will feature
training not normally available in
classroom settings. Courses include
quality basics, integrated quality management, auditing for improvement,
failure mode and effects analysis, and
corrective and preventive action. Visit
www.asq.org/promotional/milwaukee for more details on the courses,
instructors and special registration
offers.

ment and support services.

14% of respondents strongly agreed they

has been scheduled at 4 p.m. May 7.

MANUFACTURING

SURVEY: MIDSIZED MANUFACTURERS

EXPECT GROWTH IN REVENUES IN 2013
A majority of midsized manufacturers expect their revenues to increase this year, and 43%
said they expect to hire more workers in 2013, according to a survey released recently.
In its annual survey, Prime Advantage, a buying consortium for midsized manufacturers,
said most small and midsized manufacturers expect to beat strong revenues of 2012, with
68% of respondents anticipating an increase in sales in 2013.
The manufacturers top concern this year is the cost of raw materials. More than 90%
of respondents included raw materials in their top three cost-pressure concerns. Healthcare costs moved back into second place among top cost-pressure concerns, with 57% of
respondents including it in the top three.
We are encouraged to see that our members expect to see growth in 2013, after a very
strong 2012 for most, Louise OSullivan, founder, president and CEO of Prime Advantage
said in a prepared statement. As they focus on profitability and margins, we look forward
to partnering with both members and endorsed suppliers to fuel the bottom line, reflecting
total cost of ownership, along with the top line, greater sales and market share.

ASQ Journal spotlight

Software Quality
Professional

Every month, QP highlights an open-access article from one of

ASQs seven other journals. This month, make sure you read Value
of ISO 90003 Customer Requirement Guidelines to Improve IT Project Success, which appeared in Decembers edition of Software
Quality Professional (SQP).
The article, written by Kaali Dass, is based on a quantitative
study conducted by nine Project Management Institute chapters
around the world to measure perceived value of IT project success.
To access the article, click on the Current Issue link on SQPs website: http://
asq.org/pub/sqp. From there, you also can find a link to information about subscribing to the quarterly publication.
V O L U M E

F I F T E E N

I S S U E

T W O

M A R C H

Software Quality Costs

Edited by Taz Daughtrey

Mobile Metrics: Measuring the Accessibility

of Web Contents on Mobile Handsets
Kalpana Johari and Arvinder Kaur

A Scrum Adoption Survey

Mark Paulk

Data-driven Estimation, Management

Lead to High Quality
Kate Armel

www.asq.org

2 0 13

Mr. Pareto Head

By Mike Crossen

baldrige program

long-time director hertz to retire

Harry S. Hertz, director of the Baldrige Performance Excellence Program since 1992, has
announced his retirement and will leave the post on June 3.
Deciding to retire in the programs 25th year, Hertz said he thought that was sort of
a good transition point for me and the program. The program has had two leaders in its
25 years. It seemed like a good time for me to do something new and for the program to
have some fresh thoughts and leadership.
Hertz said he considered the programs expansion from strictly covering manufacturing and service sectors to including education, healthcare, nonprofits and government
arenas as one of the programs biggest accomplishments while he was at the helm.
The program is no longer viewed as simply an award and has become one of the standards of excellence organizations around the world strive to achieve. The Baldrige criteria
are being practiced in nearly 90 countries, Hertz said.
Weve changed from strictly an award program to a national educational program, Hertz
said. Its really about education and learning and helping to improve performance broadly.
One of the programs biggest obstacles during Hertzs tenure happened when the
federal government decided it would no longer contribute funds to the programs budget.
That meant there was a $9.6 million hole in the programs budget in 2012. But the program and its partnersincluding the Baldrige Foundation, the Alliance for Performance
Excellence and ASQ, which administers the programregrouped and developed a different business model and plan to maintain operations and continue the program.
I think were through the transition now, Hertz said. It was tough.
Hertz said he isnt sure what the future holds for him. He has three growing grandchildren who will keep him busy, but he doesnt want to lose touch with the Baldrige
program, which he predicts will continue to develop and grow.
Certainly, I want to stay involved in Baldrige somehow, Hertz said. I think it has a lot
to offer. I want to continue in some capacityworking with the program and the wonderful
people on staff, as well as in the community that has engaged in Baldrige through the years.
Ive always been very interested in education, and so Id like to do some teaching, as well.
The Baldrige Program is in the process of seeking a successor. The job has been posted
on the www.usajobs.gov federal hiring website.

WordtotheWise
To educate newcomers and refresh
practitioners and professionals, QP occasionally features a quality term and
definition:

Right size
Matching tooling and equipment to
the job and space requirements of lean
production, right sizing is a process that
challenges the complexity of equipment
by examining how equipment fits into
an overall vision for workflow through
a factory. When possible, right sizing
favors smaller, dedicated machines
rather than large, multipurpose batch
processing ones.
SOURCE:
Quality Glossary, Quality Progress, June 2007, p. 55.

CORRECTION
In the March 2013 Quality in the First
Person column, Show and Tell
(pp. 48-49), author Marcia M. Weeden
was misidentified as the chair of the
ASQs Olde Colony Section. She is the
sections voice of the customer chair.
QP regrets the error.

May 2013 QP 15

Balancing

Act

Collaboration
reduces risk
in quality data
management
by Eda Ross Montgomery
and Justin Neway

data MANAGEMENT

Quality has long been an initiative, a goal andespecially in regulated industriesa requirement for staying in business.
Todays quality professionals are pushing the envelope to take quality
to new levels and make it a way of life for their organizations.
Risk reduction is a driver for quality improvements across corporate and global boundaries. Standards, such as ISO 9001, have been
widely adopted to minimize risks to consumers. The ISO 9000 series
of standards have been interpreted to fit specific requirements in
various industriesfrom automotive and aerospace manufacturers to
telecommunication and software providers.
These tools are in the early stages of being adopted in the pharmaceutical industry as part of the implementation of quality by design
(QbD). In parallel with implementing risk-reducing quality improvements, it is important to also undertake a technical evaluation program of product and process improvements to ensure they remain in
place and new risks do not unexpectedly arise.
With common methods and standards in
place, manufacturing organizations also share
a daunting challenge: an increased volume of
electronic and paper-based data collected during
process development and manufacturing. Overwhelming amounts of data stored in disparate
systems result in the inability to easily access
pertinent data for quality investigations. Quality
teams need easy ways to get accurate views of
product quality, and better manage the time and
resources required to produce standard quality
reports.

In 50 Words
Or Less

International standards
organizations recommend that life sciences
manufacturers implement quality by design,
making data management central to an organizations quality strategy.
The collaboration of quality and manufacturing
teams to understand and
analyze data to improve
processes, along with
the use of technology,
can help an organization
reduce risk.

May 2013 QP 17

Global pharmaceutical manufacturers sometimes re-

ket when quality lies outside an initial acceptance range

fer to data silos, such as corrective and preventive action

(for example, textiles sold to discount retailers). The

(CAPA) systems, laboratory information management

other end holds process manufacturing-based products

systems (LIMS), enterprise resource planning, manu-

that, for safety and legal reasons, cannot be sold when

facturing execution systems, data historians and paper

variance exists.

records. When quality and manufacturing teams investi-

Until recently, larger margins on products that made

gate a problem using data from multiple siloed systems,

it to pharmacy shelves compensated for large numbers

the result is often spreadsheet madness, which leaves in-

of lost batches. But recent market forces have created

dividuals sifting through piles of out-of-context data that

pressure for reduced pricing, driving the need for life sci-

may not even pinpoint the problem.

ences manufacturers to invest in measures to reduce pro-

An added challenge is the lack of collaboration among

most manufacturing and quality teams when it comes to

cess variability, increase yield, and improve quality and

robustness.

data management. The online sidebar, Signs of Trouble,

Economic factors, such as fewer blockbuster drug

which can be found on this articles webpage at www.

pipelines, loss of patents and outsourcing, are also driv-

qualityprogress.com, describes four additional indica-

ing the life sciences industrys need to control variability

tors that suggest an organizations quality data manage-

to reduce manufacturing risks and supply chain costs.

ment system needs improving.

Regulators are helping with recommendations, such as

Establishing shared goals and a mutual understanding

QbD, that present an opportunity to improve manufactur-

of the problem can help overcome the practical difficul-

ing processes based on new real-time process measure-

ties of accessing process development and manufactur-

ments and by taking advantage of previous experiences

ing data from separate databases and paper records.

with similar processes.

When collaboration occurs, significant paybacks result

A decade ago, process analytical technology was intro-

from connecting to data in real time for trending analysis.

duced by the U.S. Food and Drug Administration (FDA)

as a mechanism for improving real-time process control

Life science drivers

and, later, for achieving QbD in pharmaceutical and bio-

The life sciences industry serves as an interesting example

technology processes. Since then, the volume of electron-

because it is relatively behind the curve when it comes to

ic and paper-based data collected during process devel-

reducing risk through the management of quality data. Ac-

opment and manufacturing has increased dramatically.

cording to Pharmaceutical Technologys Equipment and

With risk reduction and improved product quality in

Processing Report: The industrys approach to risk is more

mind, these efforts have helped make QbD a way of life

sophisticated now, but still

for the life sciences industry. As a result, more of the

has room for improvement

processes that make life sciences products have quality

Drug companies some-

designed into them rather than just involving testing the

times lack certain capabili-

quality of the product at the end of the production line.

Continuum of
manufactured
goods / figure 1
Adverse consequences of low quality

High

Pharmaceuticals

ties that could help enhance

Regulators encourage collaboration among manufac-

product and process knowl-

turing and quality teams with guidelines that integrate the

edge.1

industries,

two areas. In its 2008 Q10 document, the International

such as food and beverage,

Conference on Harmonization of Technical Requirements

and specialty chemicals, are

for Registration of Pharmaceuticals for Human Use (ICH)

further along and operate

said, ICH Q10 demonstrates industry and regulatory au-

with smaller profit margins.

thorities support of an effective pharmaceutical quality

Other

Imagine a continuum of
manufactured goods (FigTextiles to
discount
retailers

Low
Low

Ability to repurpose product

18 QP www.qualityprogress.com

High

system to enhance the quality and availability of medicines around the world in the interest of public health.

ure 1). One end includes

Implementation of ICH Q10 throughout the product

products that are still sale-

life cycle should facilitate innovation and continual im-

able when variance occurs.

provement and strengthen the link between pharmaceuti-

These items can be repur-

cal development and manufacturing activities.2

posed for an identified mar-

ICH Q10 outlines a quality management system

data MANAGEMENT

modelthe Pharmaceutical Quality Systemand states

a combined or unified process-centric view of product

that implementation of the Q10 model should result in

development, quality and manufacturing across the IT

achievement of three main objectives which comple-

systems. This shift in thinking must be made attractive to

ment or enhance regional good manufacturing practice

team members who may be resistant to it, and champi-

requirements:3

oned by those who value a shared purpose between qual-

1. Achieve product realization: supports operation of

ity and manufacturing teams.

processes that meet appropriate quality attributes.

As another example, annual product reviews (APR)

2. Establish and maintain a state of control: en-

typically are qualitys responsibility, and they are organized

ables risk-based monitoring and control systems for

around individual drugs. In a more collaborative environ-

process performance and product quality, providing

ment, the APR process itself can be the organizing prin-

assurance of continued suitability (for example, the

ciple for data. Information about specification failures and

ability for the process to continue producing the in-

process deviations is shared among the combined process

tended outcomes) and capability of processes.

development, quality and manufacturing teams.

3. Facilitate continual improvement: strengthens the

A quality team might see trend charts and ask how the

knowledge or data link between development, manu-

problem will be solved. The next step before taking correc-

facturing and quality.

tive action is to dig through the data from disparate sourc-

ICH Q10 also facilitates a life-cycle approach to qual-

es and reorganize it using error-prone manual methods.

ity management and risk reduction. It was decided to go

An added complexity is that different quality teams

to ICH Q10 to bring the ICH vision to fruition over the

often have different data languages that result from their

product life cycle, explained Joseph Famulare, former

unique needs and make it impractical to organize the data

deputy director of the Office of Compliance in the FDAs

in one way that will satisfy all their needs. An example of

Center for Drug Evaluation and Research. The result is

the different data languages used by quality teams with

that firms that employ QbD and use risk-management

varying priorities is when one team uses deviations as a

principles (ICH Q8 and ICH Q9) can use a robust quality

driver for batch release and another team uses control

system to manage change and continual improvement,

charts as a driver for change control.

and this would lessen the need for post-approval (regu-

The increased use of contract manufacturing organiza-

latory) filings, putting quality more in the hands of the

tions (CMO) on a global scale (up to 40% of drugs Ameri-

manufacturer, he said.4

cans take are currently manufactured outside the United

States) increases the challenge of achieving this unified,

Intersection of quality and manufacturing

process-centric view across all aspects of the organiza-

When manufacturing organizations implement quality im-

tion.5 But in these situations, it is even more critical that

provement initiatives, quality and manufacturing teams

all aspects of sponsor and contract or supplier organiza-

can interact in new ways to achieve shared goals. Today,

tions are aligned on the strategy and tactics for ensuring

most quality systems are designed to serve the needs of

ongoing product quality.

the quality team, such as verifying assessments and pub-

Quality cant execute on its own without the ability

lishing results. By design, LIMS alone are not focused on

to collaborate in a world where teams share a common

making a manufacturing process more successful.

language (data and facts in context) organized around a

Collaboration in the name of quality data management

process. For example, the temperature might be X, but in-

requires a paradigm shift that organizes data around the

vestigators also might need to know characteristics of the

manufacturing process and resulting product control

previous process step or input material before they will

strategy, rather than around samples, control of analytical

be able to recommend appropriate action.

workflows, control of standards and analyststhe current organizing principles on which LIMS are based.
For example, results may be posted and verified
about the selenium content of a particular sample, but
why would someone want to see the data for an individual sample? Ultimately, the goal is to better control the
process that produces the samples, so there needs to be

Critical success factors include providing end users

with on-demand access to data in a collaborative analytics, trending and reporting environment in which the multidisciplinary team can work together productively.
The most important requirements for this system are:
A simple user-centric interface for direct, on-demand
access to all the data from disparate sources.

May 2013 QP 19

 A practical way to capture paper-based data and make

it easily available in electronic form.

validation guidance.9

The ability to work with continuous and discrete data

Technology tools (such as software), used for data ana-

together, sharing data, analysis results and reports

lytics should work with quality assurance data systems to

across disciplines, scales of operation and geographi-

enable and support ICH Q10 product life cycle manage-

cally dispersed sites.

ment goals in the following areas:10

Simplifying the preparation and distribution of analysis results.

of electronic data), audit-trailed capability to capture

reports of batches and campaigns.

paper-based data in electronic form in a network-

The ICH Q10 process performance and product quality

accessible database available to all users; enable

monitoring system section says: Pharmaceutical compa-

centralized experts to prepare and distribute outputs

nies should plan and execute a system for the monitor-

for widespread use and updating by globalized teams

ing of process performance and product quality to ensure

of diverse, nonstatistical users; provide a collabora-

a state of control is maintained. An effective monitoring

tive data access and analytics platform that spans

system provides assurance of the continued capability of

geographic and organizational boundaries (between

processes and controls to produce a product of desired

sponsors and CMOs) so teams with shared concerns

quality and to identify areas for continual improvement.

can achieve their joint goals.

The right tools, such as data aggregation, analysis, con-

Process performance and quality monitoring.

textualization and reporting, will work with existing qual-

Provide observational users an updated portal or

ity systems by adding a layer on top (Figure 2) to span

dashboard to display status data anywhere, anytime.

quality and manufacturing systems and provide access to

Simplify and reduce the cost of periodic quality re-

the necessary data.

view, APR and production report preparation and

In October 2010, the International Society for Pharma-

distribution; provide views of test method processes

ceutical Engineering (ISPE) released Overview of Product

to study and reduce test method variability; provide a

Design, Development, and Realization: A Science- and Risk-

collaborative platform for comparison of internal and

Based Approach to Implementation. According to Phar-

Collaboration tools /
CAPA

MES

figure 2
HIST

Collaboration tools
(Data aggregation, analysis, contextualization
and reporting)

CAPA. Provide a link between customer-complaint

product quality life

data and product testing and production data to un-

cycle implementation

derstand cause-and-effect relationships; enable a link

initiative has been

between process development and manufacturing

one of the leading

sample testing to make comparisons; enable testing

efforts to translate

and implementation of process improvements.

ICH guidance on sci-

Change management. Provide a platform for imme-

ence and risk-based

diate access, organization and flow of data for inter-

manufacturing

CAPA = corrective and preventive action

HIST = data historians
LIMS = laboratory information management systems
MES = manufacturing execution systems

20 QP www.qualityprogress.com

into

nal communications.

more practical lan-

Management review. Provide management users an

guage and to outline

updated portal or dashboard to display status data

how Q8, Q9 and Q10

anywhere anytime; provide easy access to and organi-

might be applied by

zation of data for timely preparation of management

industry.7

reports; provide a collaborative platform to enable

Meanwhile,

Manufacturing

outsourced operations and quality data.

maQbD.com, ISPEs

the

staff to implement management actions.

Society

An example of how a global life sciences manufac-

for Testing and Ma-

turing company with a quality trend monitoring system

terials is developing

met these criteria while implementing a paradigm shift

standards

American
Quality

Global. Provide a Part 11 compliant (a Code of Federal Regulations requirement for integrity and security

Automating the generation of periodic reviews and

LIMS

es to implementing ICH Q8-108 and the FDAs process

in-

for collaborating to achieve multi-year initiative goals

dustry that provide

is discussed in the online sidebar, A Life Sciences Case

practical approach-

Study.

for

data MANAGEMENT

Tips for success

tivities between sponsor companies and CMOs.

Based on first-hand practical experience, the top five

Quality can truly be a way of life with the right man-

tips for change management with quality and manufac-

agement structures and technology. A collaborative ap-

turing teams include:

proach that meets ICH Q10 guidelines and adds a data

Minimize time requirements. No one resists the

access contextualization layer over existing technology

concept of quality trend monitoring, but some fear the

systems can improve overall quality data management.

perceived effort and time it might take. It is important

Spreadsheets and paper records will never be com-

to reserve the time needed for initial benchmarking and

pletely eliminated, but the right technology system helps

conduct ongoing collaborative data analysis.

significantly reduce the errors and risks associated with

Centralize. Having a central project group to relieve

these components. It enables companies to leverage ex-

the workload and evangelize the approach can drive suc-

isting IT systems in a way that invites management, IT,

cess. It can help if a central group is charged with doing

quality and manufacturing to support important risk miti-

baseline analysis to minimize the burden placed on other

gation initiatives. QP

groups.
Train. Provide basic statistical training across groups to
ensure uniform capabilities. Guidance documents assist
in eliminating subjectivity that might affect results.
Communicate. Teams must meet regularly to review
data so quality, plant and manufacturing operations
groups can communicate consistently. There may be
initial resistance to global visibility of data when producing the same product at multiple sites and contract
sites, but the payoff is a more thorough and routine
examination of variation and a consequent reduction
in variability across sites.
Automate. The right technology tools enable routine
monitoring without interruption. Manual data must be
incorporated using automation and technology that
minimizes error. Automating data access, aggregation
and contextualization, which involves organizing related data into groups or batches in preparation for
analysis is a massive time-saver. While monthly analysis is a minimum requirement to ensure that trends in
high-volume products are identified and controlled,
technology tools allow the option for daily updates

References
1. Erik Greb, Moving From a Reactive to a Systemic Approach to Manage Risk,
Pharmaceutical Technology Equipment and Processing Report, Dec. 21, 2011,
http://pharmtech.findpharma.com/pharmtech/Online+Only/Moving-from-aReactive-to-a-Systemic-Approach-to-/ArticleStandard/Article/detail/752605?co
ntextCategoryId=40939 (case sensitive).
2. International Conference on Harmonization of Technical Requirements for
Registration of Pharmaceuticals for Human Use, ICH Q10, 2008 www.ich.
org/fileadmin/Public_Web_Site/ICH_Products/Guidelines/Quality/Q10/Step4/
Q10_Guideline.pdf (case sensitive).
3. Ibid.
4. Patricia Van Arnum, ICH-Q10: A Recipe for the Product Life Cycle, Pharmaceutical Technology, Sept. 2, 2007, http://pharmtech.findpharma.com/pharmtech/
Special+Report/ICH-Q10-A-Recipe-for-the-Product-Life-Cycle/ArticleStandard/
Article/detail/452944 (case sensitive).
5. Margaret A. Hamburg, Import Safety: Status of FDAs Screening Efforts at the
Border, testimony before the U.S. House Subcommittee on Oversight and Investigations, April 13, 2011, www.fda.gov/newsevents/testimony/ucm250710.
htm.
6. Greb, Moving From a Reactive to a Systemic Approach to Manage Risk, see
reference 1.
7. Another QbD Milestone: PQLI Releases Introductory Good Practice Guide,
PharmaQbD.com, Oct. 22, 2010, www.pharmaqbd.com/pqli_releases_good_
practice_guide.
8. ASTM International, ASTM E2500-07 (2012): Standard Guide for Specification,
Design and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment, www.astm.org/Standards/E2500.htm (case
sensitive).
9. U.S. Food and Drug Administration, Guidance for Industry: Process Validation:
General Principles and Practices, January 2011, www.fda.gov/downloads/
drugs/guidancecomplianceregulatoryInformation/guidances/ucm070336.pdf.
10. Greb, Moving From a Reactive to a Systemic Approach to Manage Risk, see
reference 1.

due to reduced cost and effort requirements.

Quality and manufacturing teams can apply these lessons for better quality data management. Ultimately, life
sciences companies can use up-front analysis to identify
continuous improvement opportunities by identifying the

Eda Ross Montgomery is senior director and

technical steward at Shire in Wayne, PA. She
has a doctorate in analytical chemistry from the
University of North Carolina in Chapel Hill.

products with the least acceptable outcomes (for example, high variability in pH values). They can triage the list
to drive goals and priorities for the manufacturing and
quality organizations.
New products, as well as additional manufacturing
sites, can be brought into the quality data trend monitoring program. The same approach can be used to develop

Justin Neway is vice president and chief science officer of analytical, development, quality
and manufacturing solutions for Accelrys in
Boulder, CO. He has a doctorate in biochemistry
from the University of Illinois in Champaign.

joint goals and implement continuous improvement ac-

May 2013 QP 21

Avoiding an

Avalanche
In 50 Words
Or Less

Organizations can be
overwhelmed by an
avalanche of information and documentation, which can lead to
process inefficiencies
and lost productivity, as
well as increased risk
and liability.
Centralized electronic
document and data
control processes
within a quality management system help
organizations manage
critical and sensitive
content and make more
informed decisions.

Proper control
of documents and
data within a QMS
will reduce risk
and liability
by Greg Milliken

data management

ORGANIZATIONS THAT MAKE products

with rigorous quality requirements face numerous challenges
associated with meeting objectivesranging from complying
with standards (such as ISO 9001 and current good manufacturing practice, or cGMP) to operating in highly regulated
and frequently audited environments.
Organizations of all sizes and across all industries can
easily fall victim to quality issues without effective information control as a core component of their quality management
systems (QMS). The result can range from organizational inefficiencies and poorly allocated resources to negative brand
perception, lost revenue and increased liability.

May 2013 QP 23

Without a centralized and organizationwide ap-

its time to consider incorporating a formal electronic

proach to managing information, organizations leave

content control solution into your QMS:

themselves vulnerable because of the difficulty and

Who is the gatekeeper? A manual quality process

complexity of managing critical and sensitive content

often revolves around one person who manages all

and processes that affect quality and compliance. On

essential quality-related documentation. What hap-

the other hand, organizations that adhere to a pragmat-

pens if this person stays home sick, takes vacation

ic, day-to-day approach to managing quality information not only operate at a vastly superior level, but also
reduce risk and liability.

or leaves the organization?

Where does all of our documentation reside?
Quality management is information-intensive, and

Establishing document and data control processes

the number of associated documents can grow ex-

within a quality management framework improves

ponentially over time. Many quality-related records

manufacturing and production processes, enhances

require approval by signature, which traditionally

collaboration, optimizes the use of existing resources,

has meant storing paper-based documents in physi-

and drives organizational efficiencies that affect an or-

cal file cabinets. In a manual paper-based quality

ganizations bottom-line business objectives.

environment, its difficult to find documents and

To better understand how information control is an

verify the existence of back-up files of signed re-

integral component of quality management, you must

cords. Theres also a significant investment in stor-

recognize the challenges associated with manual qual-

age space to maintain essential documentation.

ity processes, the types of content typically managed

Did you get that email? Its often difficult to get

within a QMS, how data management can improve

up-to-date information about the state of quality

compliance-related activities, and how an effective

documentation and processes because related in-

solution for information control can significantly im-

formation and communications often are dispersed

prove quality systems and processes.

among unrelated collections of paper documents,

electronic files and emails. In this environment, its

Challenges of manual quality processes

almost impossible to get a quick answer to a simple

For many organizations, data and document control

question such as, Have the required people read

processes are managed separately by different depart-

the new instructions we approved two weeks ago?

ments. This proves ineffective as individuals in one

How are quality processes managed? Many or-

department lack visibility into important information

ganizations have instituted quality policies featur-

control procedures implemented within other depart-

ing specific repetitive tasks such as weekly system

ments.

health checks, periodic maintenance, monthly data

In addition to the challenge of coordinating often

recovery tests or regular standard operating proce-

disparate electronic data management methods, the

dure (SOP) reviews. Organizations, however, often

problem is frequently exacerbated by the use of archa-

find it challenging to actually ensure these tasks are

ic, manual processes for storing and organizing critical

completed on time and according to policy guide-

documentation in physical file folders.

lines because only a limited number of people (of-

Manual information control procedures are errorprone, and may inadvertently compromise an or-

ten one) have visibility into how quality processes

are managed.

ganizations ability to comply with regulations and

Have quality issues been resolved? Audits, in-

standards such as cGMP and ISO 9001. Furthermore,

spections and normal daily operations produce dif-

organizations also can incur high costs because of the

ferent kinds of issues, nonconformities, audit find-

excess time and resources needed to manually manage

ings and protocol deviations. Manual quality issue

documentation required to maintain compliance and

management is not only tedious, but its also error-

mitigate operational risks.

prone and tends to deteriorate over time. Qual-

The manual approach to document and data control

ity managers can do little other than send endless

is rife with flaws that can negatively impact the integ-

email reminders and make follow-up phone calls

rity of an organizations QMS. If the following ques-

about pending corrective actions.

tions are being asked frequently at your organization,

Today, more manufacturers realize that to mitigate

24 QP www.qualityprogress.com

data management

Organizations can incur high costs because

of the excess time and resources spent
manually managing documentation.
risk associated with production processes and proce-

zations also should define additional categories and

dures, an effective information management system

subcategories based on the specific types of informa-

must be implemented. Modern content management

tion they produce during the course of business. For

solutions deliver high levels of management and con-

instance, subcategories of product design and devel-

trol, empowering organizations to improve productiv-

opment may include specifications, drawings or bills

ity, reduce production costs, ensure compliance and

of materials. Examples of subcategories for person-

reduce risk.

nel could be employee reviews and manuals and training certificates.

Content categories within a QMS

Manufacturing organizations produce an overwhelm-

A global environment

ing amount of information. Adequately managing

Regulated organizations that maintain paper-based

inspection sheets, audit reports, nonconformance

systems are falling behind, and the reason for the lag

documents, corrective and preventive actions (CAPA),

is quite evident. Quality systems based on paper docu-

customer complaints and inquiries can be a daunting

ment control processes put organizations at a competi-

and resource-draining task.

tive disadvantage. Paper-based systems significantly

When integrating a solution for document and data

increase the risk of noncompliance with cGMP in regu-

control as a component of a QMS, one of the first steps

lated organizations or by those seeking to comply with

is to define the categories of documents that exist (or

the standards or regulations established by the U.S.

will exist) in the course of business. After primary cat-

Food and Drug Administration (FDA), the European

egories are defined, more specific types of information

Union (EU), the International Organization for Stan-

within each category also can be defined.

dardization (ISO) or other bodies.

The goal of identifying specific data categories is to

Data are generated by the day-to-day activities that

paint a comprehensive picture of how a product was

take place in each department. Regulatory operations

designed, what decisions were made during the pro-

personnel, for example, produce documents and de-

cess (including why certain alternative designs were

velop submissions, which they file for approval. A sub-

rejected), how a product was tested, and why that test-

mission begins long before the documents are created,

ing was reasonable and adequate. Another important

however. In most cases, data gathering is conducted

goal is to show how an organization responsibly pro-

locally, with responsible departments drawing on the

cesses and responds to complaints and mishaps.

information needed to adhere to regulatory require-

The following are examples of broad content categories organizations typically establish within their

ments or to track commitments.

What is often missing is the ability to aggregate in-

QMSs:

formation across the enterprise so it can be used to

1. Product design and development.

conduct more predictive work, such as project plan-

2. Manufacturing and quality control.

ning across the portfolio, resource planning, and pre

3. Merchandising.

and post-launch marketing activities. In so doing, orga-

4. Service and installation.

nizations can manage their activities more holistically

5. Complaints and mishaps.

and better equip themselves to recognize and act on

6. Personnel.

information that can affect operations.

7. Management and coordination.

In addition to these general classifications, organi-

Clearly, regulatory information management involves far more than just tracking submissions. The

May 2013 QP 25

processes and technologies employed to enable suc-

impact on productivity due to a reliance on manual

cessful regulatory information management also help

processes, an ever-increasing demand for inefficient

organizations to consolidate their disparate systems

physical storage, and the risk of losing the signed origi-

and produce meaningful information that leads to bet-

nals due to a disaster. For these reasons, many organi-

ter decision making.

zations use electronic and digital signing capabilities.

The starting point is managing and structuring data

These two methods of signing are similar in that

clearly and consistently. Only by having clean, consis-

they are legally binding and meet compliance require-

tent and reliable data is it possible to build a broad pic-

ments. Common documents typically requiring signa-

ture of how an organizations resources are currently

tures include:

being used and how they can be maximized in the fu-

Organization SOPs, instructions and guidelines.

ture.

Training certificates and self-learning forms.

Complete, accurate and clear documentation is the

key to maintaining compliance in a cGMP environment. Accurate and updated information is needed to
establish quality management principles, describe specific processes and procedures, and maintain records
that demonstrate such processes and procedures were
followed.
Together, these principles, processes, procedures
and records show a manufacturer is operating in a controlled state, defined as a condition in which the set of

HR documents, such as I-9 forms, annual performance reviews and training certificates.
Periodic maintenance tasks, quality checks and
change logs.
Request approvals (for example, authorizing access
to an IT system or organization premises).
Documents related to CAPAs based on deviations
or audit findings.
Industry-specific document types, such as those associated with monitoring reports for clinical trials.

controls consistently provides assurance of continued

process performance and product quality.1

Electronic vs. digital signatures

Electronic information management systems pro-

There are two primary methods for signing docu-

vide a framework for centrally organizing, managing

ments that are stored electronically that are legally

and tracking important data and processes. In addi-

binding for general contracts and agreements, as well

tion, they support lean manufacturing practices and

as sufficient to ensure compliance with regulations

quality management programs that ensure efficient

and industry standards. The two methods, electronic

processes that comply with government regulations

signing and digital signing, sound similar, and indeed

and industry standards.

have some similarities, but there are also distinct differences that are often misunderstood. For electronic

Signatures in a paperless world

signatures:

It is common in many business environments for

The proof of the signature remains in the system

important electronic files to be stored on a shared

network drive, or increasingly, in an on-premise
content repository or web-based portal. When its
time to approve or authorize a document requiring a
signature, however, it is still far more common that

where the signature is captured.

They work for printable documents and database
records.
They support one or multiple signatures per document.

it is printed and signed with a pen. Thus it starts a

The system capturing the signature also can link the

new life as a hard copy that has to be stored and man-

signed document or database record to a record for

aged manually. This need for handwritten signatures

the individual signers.

keeps many organizations stuck with paper-based

processes.
Its easy to understand why traditional handwritten

For digital signatures:

The proof of the signature is embedded in the signed
document.

signatures are still so widely used. Theyre legally bind-

Only one signature per document is allowed.

ing and, psychologically, they just feel right. Signing

They are supported only for printable documents,

documents with a pen leads to serious process issues,

however, including a lack of file control, an adverse

26 QP www.qualityprogress.com

not database records.

The system capturing the signature also can link

data management

The need for handwritten signatures still keeps many

organizations stuck with paper-based processes.
the document to the originating entity of those who

Enhancing quality management

signed the document, even when a copy is sent out-

Information management is a critical component of

side of the organization.

any QMS. GMP/cGMP, FDA regulations, ISO qual-

The benefit associated with both methods of signing

ity management standards, and other regulations and

include time savings: They eliminate the need to send

standards require organizations to manage file ver-

originals via mail between offices, time is no longer

sions, document and execute SOPs, control employee

inefficiently spent on print-sign-scan processes, and

access, facilitate training initiatives and implement ap-

signed original documents can be located in seconds.

propriate change control procedures for all organiza-

Both types of signing also support quality processes

and compliance in the following ways:

tional information.
To be competitive in todays global marketplace,

Accompanying time stamps cannot be forged.

its paramount to have a tightly integrated and com-

Only authorized personnel can sign.

prehensive solution for managing and controlling in-

They are easier to read or interpret (including the

formation across the enterprise from within a single,

computer-generated signature page).

centralized repository. When documents and data can

They provide easy access to one signed original all

be searched, viewed and managed across multiple, in-

of the time for all purposes, eliminating the risk of

tegrated systems, efficiency is optimized as organiza-

using outdated versions or losing hard-copy origi-

tions streamline workflow processes and reduce costs.

nals.

With an effective approach to information manage-

Finally, electronic or digital signatures improve

ment integrated within a quality management frame-

support for disaster recovery and business continuity.

work, organizations can control and regulate docu-

Signed originals can be easily maintained and secured

ment access, improve visibility and control revisions

via backup and data replication with redundant stor-

across multiple departments, while also providing

age systems in different physical locations.

the necessary level of automated notifications and

It is also possible to capture and manage electronic

communication to those people who are affected by

versions of traditional handwritten signatures. In a

the changes. This, in turn, simplifies compliance pro-

typical scenario, an electronic document is approved

cedures, optimizes processes, automates information

in a workflow, printed, signed and scanned with optical

exchange and reduces administrative overhead. As a

character recognition (OCR) and stored electronically.

result, teams can work more effectively and efficiently,

This process also can fulfill FDA requirements as long as

keeping personnel connected, informed and on task,

th system prevents modifications to the electronic docu-

providing access to the right information to anyone at

ment after it has been stored. While this approach offers

any time, from anywhere. QP

a number of benefits associated with eliminating certain

manual processes, it still involves the undesirable and
inefficient print-sign-scan process.
There are a variety of tools on the market for eas-

REFERENCE
1. U.S. Food and Drug Administration and International Conference on Harmonization, Guidance for IndustryProcess Validation: General Principles
and Practices, January 2011, p. 18, www.fda.gov/downloads/drugs/
guidancecomplianceregulatoryinformation/guidances/ucm070336.pdf.

ing the transition to a paperlessor at least more

paperlessworld. Handling signatures is an important element, so be sure to evaluate the options
for electronic and digital signatures supported by
systems you consider to help you on the journey

GREG MILLIKEN is the president of M-Files

Inc. in Dallas. He holds a bachelors degree in
mechanical engineering from the University
of Texas at Austin.

to a more efficient and productive business that is

less reliant on manual and paper-based processes.

May 2013 QP 27

What Makes

You Tick?

PROCESS IMPROVEMENT

Coordinate your organizations

inner workings to optimize
efficiency and lower costs

by H.F. Ken Machado

every organization has several

customer support activities that continually take place
and involve more than one operational function. Because
the response times among these corporate functions
can vary, the task of internally managing the functions is
complex and can result in issues that must be continually
addressed.
The sales function is in continuous contact with the
customer base and general market, so the response to
market requirements and changes is nearly immediate
(one to two weeks).

In 50 Words
Or Less

Uncoordinated internal
operations create organizational inefficiencies, a
lower level of customer
service and unnecessary
delays in management
decisions, resulting in
increased costs.
A cross-functional process management system
can help organizations
break through operational
logjams, allowing business
functions to work together
to effectively perform
co-dependent business
requirements, thereby
improving business performance.

May 2013 QP 29

The marketing function works with the customer

the assigned staff members are preoccupied and busy

base to determine new product requirements and to

working on the individual priorities set by each sepa-

orchestrate the introduction of new products. To ac-

rate functional manager.

complish this task, the marketing function must work

with the internal engineering function, so the response

Symptomatic patterns

time required may be four to eight weeks.

Because functional planning horizons vary and market

The operations function includes order planning

demand changes are so dynamic, the functional de-

(two to three weeks), material procurement (two to

partments involved must meet regularly to coordinate

10 weeks), product manufacturing (one to four weeks)

their individual plans. The purpose of the joint meet-

and delivery (one to two weeks).

ings is to reconcile the built-in planning or reaction

The total lapsed time for operations, therefore, can

time needed to maintain the organizational marketing

range from six to 19 weeks, and the required response

plan. Often, there must be additional co-dependent

time by function can vary considerably, as shown in

work meetings to maintain ongoing control of compos-

Table 1.

ite customer and market response requirements.

Evidence that the difference in response time

This approach stretches the resources involved in

among business functions can be problematic for orga-

updating and maintaining the commitments made to

nizations is illustrated by internal signs and symptoms

individual customers and the overall marketplace. Be-

that together form an identifiable pattern. This symp-

cause of these demands, the functional staffs involved

tomatic pattern frequently occurs when large organiza-

spend more time maintaining the status quo rather

tions place a high volume of their top business priori-

than pursuing more proactive process improvement

ties into separate sets of functional queues.

tasks.

Because the staff members involved in accomplish-

Functionally independent priority systems are

ing these objectives are in different corporate func-

equally counterproductive. Process hand-off tasks

tions, the co-dependent functional managers end up

must be orchestrated among functions at the appro-

in a corporate gridlock of independent queue priority

priate process junctions. This continuous process

systems that are being serially processed. We call this

requires the dynamic management of the various co-

condition corporate queue paralysis (CQP).

dependent functional responsibilities. A more pro-

CQP describes a circumstance within large orga-

ductive approach would be to work under a common

nizations in which many of the top-level process re-

cross-functionally coordinated priority management

quirements get placed into separate sets of priority

system.

management queues. This syndrome occurs because

organizations with a diverse set of functionally spe-

Long-term solution

cific activities tend to naturally operate independently

Applying the principles of cross-functional manage-

rather than in a coordinated, process-controlled envi-

ment will break organizational logjams and improve

ronment. The situation often goes undetected because

overall corporate performance going forward. To resolve the CQP dilemma, five basic operational steps

Required response time by

function / Table 1
Response
time/weeks
Sales
function

are required to develop and maintain a robust crossfunctional priority management system:
1. Develop a single overall flow process of the crossfunctional events involved. This should be performed by a seasoned cross-functional specialist

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

(CFS) and should be built around the concepts of

1-2

parallel activities, low process latency (a delayed

Marketing
function
Operations
function

30 QP www.qualityprogress.com

reaction between stimulation and response) and de4-8

cision making, which promote progress per unit of

time. These are a vital set of requirements when the
6-19

decision-making process is supported by an information-based workflow system.

PROCESS IMPROVEMENT

2. Draft a common procedure that encompasses the

Developing the procedure

needs of the functions involved. This requirement

Next, the CFS drafts the initial version of the sequen-

also should be performed by the CFS, who should

tial steps in the process. Usually, there is at least one

be a well-qualified professional with substantial

paragraph of text needed to describe each sequential

process improvement experienceoften an indus-

task in the overall process.

trial or quality engineer, or process improvement

specialist.

During the development of the procedure, the CFS

frequently consults with each of the internal functional

3. Assign process owners, or principals, for each func-

participants to ensure buy-in. The procedure is de-

tional entity and indoctrinate each about the need

signed around the recommended ISO 9001 document

and purpose for the cross-functional management

format structure and the requirements to document

plan.

process inputs and outputs. This is done for two rea-

4. Have senior management review, approve and pub-

sons: The ISO 9001 format has proven over time to be

lish the overall cross-functional process and proce-

easy to follow and understand, and the resultant docu-

dure in the organizational process control system.

ment is properly formatted for organizations that seek

5. Require process owners to manage, monitor and

modify cross-functional process steps to drive continual improvement.

ISO 9001 certification.

Developing the procedural text requires adding important detail that may have been left out of the initial
flowchart. For that reason, the flowchart is updated by

Developing the process flow

the CFS over the course of time it takes to complete

An overall process-oriented approach is required to de-

the draft. After completion, the text and the updated

fine the complex cross-functional set of sequential re-

flowchart are distributed for review by all involved in

quirements. This must be constructed by experienced

the development process.

personnel who are able to balance low process latency

After responding to any email requests for input or

with effective levels of participation, decision making

clarity, the CFS calls a meeting of all the major con-

and ownership.

tributors. The purpose of the joint contributor meeting

The first step is to develop a preliminary overview

is to clarify and gain a common understanding of the

flowchart of the events required, covering the front-to-

overall process and to identify any new thinking and

back sequential cross-functional steps and the corre-

changes in the existing practices. The longer-term ob-

sponding responsibilities of each process step.

jective is to follow the new and improved process the

Reviewing the overall process with the individual

correct way the first time.

cross-functional principals requires perseverance

After the meeting, the CFS follows up each indi-

because a good deal of exchange and guidance often

vidual corrective action required until all the identified

must be provided to ensure all the participants in-

issues are satisfactorily resolved.

volved are on the same page.

The success of this exercise pivots on the overall

Designating the process owners

front-to-back continuity of the cross-functional pro-

In todays business environment, every important com-

cess. Therefore, gap analyses must be continually per-

pany process must be actively and continually man-

formed by the assigned CFS, and all open issues must

aged to achieve the top-level business objectives. Be-

be addressed and resolved within and across the func-

cause of the dynamics, complexities and opportunities

tions involved.

involved, this is particularly important when it comes

The flowchart is used as a graphic tool to review the

to cross-functional processes.

sequence of events required to accomplish the over-

After the cross-functional process description is

all cross-functional set of objectives. The time taken

agreed on, senior management must formally assign

to reconcile the trade-off decisions facilitates process

ownership responsibility for each process step. The

improvements that provide the leverage of organiza-

individual process owners duties are specifically de-

tion wide co-dependencies. When the final version of

fined in the responsibility section of the published pro-

the flowchart is completed, it should be published and

cedure.

distributed for reference for all involved.

During the life of the procedure and the associated

May 2013 QP 31

process, each assigned process owner is responsible

operations function, and finally the forecast plan was

for actively maintaining and managing the success-

appraised and the results were reported by the finance

ful execution of the process. Anyone requesting any

function. It was clear that a new and improved over-

changes to the officially released process and proce-

all process was required to progress beyond the frag-

dure must first formally obtain the appropriate process

mented approach being used by each of the functions

owners approval to do so.

involved.

Final process and procedure

cross-functional performance barrier. Working with

The final document is prepared for senior management

each function, the CFS was charged with defining the

review, approval and release by the CFS. After all the

process-related requirements and responsibilities of

principals and senior management have approved the

each phase of developing the progressive demand fore-

final document, it is added to the organizations docu-

cast. Because the process had to be managed on a daily

ment control system. The document is managed under

performance basis, it also had to include continuous

formal change control for the life of the process and

performance feedback loops from front to back.

Senior staff was committed to working through the

the procedure.

In the middle of the overall process development

After publication, the process and procedure must

effort, a previously hidden requirement was discov-

be actively monitored by each process owner to ensure

ered. Due to competitive requirements, geographical

they are updated with ongoing business requirements

location product price change requirements had to be

and changes. As business standards change, cross-

continuously accommodated.

functional processes must be managed to reflect the

latest competitive performance requirements.

Localized price change introductions affected the

product volume quantity and financial contribution of
several locations. This required virtually continuous

Example

product price and volume monitoring, and feedback to

A high-tech organization develops and produces prod-

all the functions involved. It also directly impacted the

ucts for the global market, which are delivered through

organizations overall revenue and profit projections.

a variety of channels. Because of its formula for suc-

Because of the laborious complexities involved,

cess, the organization grew quickly from start-up sta-

the collective process elements took almost a year

tus to being an established and successful multination-

to develop and get buy-in from each function. It was

al competitor.

a massive process development undertaking, but the

As the business grew during its initial years, coor-

mission was accomplished.

dination and communication became increasingly dif-

An integrated, dynamically changing system of pro-

ficult. The rapid growth rate was starting to surface

cesses was developed, and a feedback system that sup-

issues that were cross-functional in nature.

ported each function and its assigned responsibilities

The tasks performed within each function were

well defined and, in turn, well performed. Because of

was established. As a result, the organization also was

able to improve its forecast accuracy from 50 to 85% .

the scale of the operational entities, however, functional gaps were starting to occur when two or more busi-

Keys to cross-functional success

ness functions were involved. Many of the gaps were

There are several important elements in successfully

not always immediately recognized and, therefore, be-

creating and managing cross-functional procedural

came increasingly difficult to detect and contain with-

processes, including:

out losing operational efficiency.

Priority alignment. Aligning priorities among the

A series of major cross-functional shortcomings

functional principals into a single priority system

occurred during the monthly worldwide customer de-

is difficult because business priorities vary by sub-

mand forecasting process. The progressive monthly

ject and the time-oriented dynamics of the business

process steps started with the sales function, which

involved. All the participants must share the same

forecast the demand. The marketing function reviewed

level of priority to stay the course and get the tasks

and approved the sales functions demand forecast.

accomplished in a timely manner. Just getting the

The demand was planned and implemented by the

32 QP www.qualityprogress.com

initial attention of each of the principals takes time

PROCESS IMPROVEMENT

and involves a fair amount of persuasion. There is

meetings. The CFS must understand the most effective

also the matter of the legitimately different points

way to use systems to bring people together to make

of view that sometimes take several multiparty ex-

effective business decisions. In addition, the design of

changes to resolve.

the workflows developed must remain flexible to take

Process complexity. By its nature, it is difficult to

advantage of emerging technologies.

explain a diverse set of process steps to someone

who is not process oriented. Skill and perseverance

Corporate benefits

are required to break through the roadblock to a

Setting and meeting high-order organizational business

full understanding of the process-oriented require-

goals pivots on understanding what it takes to succeed

ments, which are fundamental to success. Often,

in todays aggressive and ever-changing competitive

the CFS has to take a trust me approach and go

environment. Cross-functional process development

the extra mile to explain the important details in-

provides the platform for successfully managing the

volved to the individual contributors.

co-dependence of the internal corporate organizations.

Functional bandwidth. To be successful, the CFS

Progressive organizations must take advantage of

must have a diverse set of skills founded in educa-

the considerable amount of knowledge that they have

tion and experience. Although the subject matter

accrued. Business inefficiencies can be difficult to find

may vary by industry, the knowledge and applica-

if you are not specifically looking for them. The devel-

tion of successful management principles and ap-

opment of cross-functional processes provides an op-

proaches are fundamental to success.

portunity to leverage business performance improve-

Most of the internal principals have skills that were

ment opportunities.

developed within their assigned function. The CFS

The first organizations to search for and develop

must have an expanded topical bandwidth of knowl-

cross-functional process improvements will set the

edge to cover the cross section of responsibilities in-

standard for the world-class performance that others

volved while also providing guidance to each principal

will follow. QP

to help him or her achieve a more broadly based understanding of the process.
The CFS also must be process literate about proven
and emerging systems, particularly when processes
are required to span multiple geographies that cannot

H.F. Ken Machado is president of Nonpareil International Inc. in Woodside, CA. He has a bachelors
degree in industrial engineering from the University
of California, Berkeley, and a masters degree in
industrial management from San Jose State University
in California. He is a member of ASQ.

rely solely on direct participation in cross-functional

May 2013 QP 33

emotional intelligence

Mood
Righting
Increase work engagement
through emotional intelligence
U.S. ORGANIZATIONS FACE monumental
challenges as a global economy has emerged. Arguably, the
global economy is driving competitive forces to levels unimaginable only a few decades ago.
In response to global economic pressures, many organizations are embracing process improvement initiatives such as
lean Six Sigma. Process improvement expertsthose tasked
with developing and implementing lean Six Sigma initiatives
play a critical role in the process. Research also suggests leadership and teamwork are key elements to success in process
improvement initiatives.1, 2

In 50 Words
Or Less

Process improvement efforts often fail

because employees and
leaders arent engaged
enough.
A recent study found
that those who can
manage their emotions
are likely to be more
engaged in their work,
which leads to greater
commitment, trust and
loyalty.
A more engaged
workforce ultimately
can lead to improved
productivity.

by Scott Thor
May 2013 QP 35

Several authors have suggested that process im-

Belts] must be emotionally intelligent observers and

provement initiatives fail because employees and

practitioners.10 Other literature suggests that being

leaders are not engaged in the process.

In general,

engaged and having a sense of engagement is impor-

organizations with engaged employees have less ab-

tant for process improvement experts leading lean

senteeism, turnover, theft and accidents, as well as

Six Sigma efforts.

3-5

higher customer satisfaction scores, profitability and

productivity.6

This research sought to understand the relationship

between emotional intelligence and work engagement

According to Gallup Consulting and Towers Perrin,

of process improvement experts. The primary goal of

fewer than 30% of employees consider themselves to

the research centered on developing a greater under-

be highly engaged, costing organizations billions of

standing of whether organizational leaders tasked with

dollars each year.7-8 Employee engagement research

leading process improvement strategies might be able

conducted by Aurelio Rivera and Jacob Flinck indi-

to tap into individual emotional intelligence, thereby

cates disengaged employees make up nearly 35% of

providing a potential pathway to improving work en-

organizational payrolls, resulting in an annual cost of

gagement, which ultimately leads to more effective

$340 billion.9

process improvement execution.

Author Andrew Milivojevich focused on the personal characteristics of belts working within the

Defining the terms

Six Sigma process when he suggested, BBs [Black

Peter Salovey and John Mayer coined the term emotional intelligence, developing what has evolved into

Emotional intelligence
model / figure 1

a four-branch ability model of emotional intelligence,

illustrated in Figure 1. The researchers defined emotional intelligence as the ability to accurately perceive,
appraise and express emotion; the ability to access and
generate feelings when they facilitate thought; emotional knowledge and the ability to understand emo-

Managing
emotion

Controlling emotions.
Keeping an open mind with feelings.
Most difficult of emotional abilities.

tion; and the ability to regulate emotions to promote

emotional and intellectual growth.11
Work engagement is a description for the relationship you have with your work. The concept of work
engagement has been described as a positive, fulfilling,
affective and motivational state of work and related

Understanding
emotion

Distinguishing relationship between

emotions and words.
Understanding complex emotions
(hate and love).

well-being that is characterized by vigor, dedication

and absorption.12 Figure 2 illustrates the concept of
work engagement.
Vigor refers to individuals levels of energy, how
willing they are to invest themselves in their work, having resilience and not easily being fatigued, and having

Facilitating
thought with
emotion

the ability to deal persistently with difficult situations.

Use of emotions to process information.
Ability to use emotions in decision
making.

Dedication centers on the notion of meaningful

work in which individuals are not only proud of what
they do, but are also enthusiastic about pursuing it. A
person high in dedication also finds his or her work
challenging and inspiring.

Perceiving
emotion

Identifying your own emotions.

Identifying emotions in pictures
and faces.
Easiest of emotional abilities.

Absorption is characterized by how immersed an

individual is in his or her work. When an individual is
absorbed in work, time seems to pass quickly, and everything outside of work is absent from an individuals
thoughts.

36 QP www.qualityprogress.com

emotional intelligence

Summary of study

Invitations to participate in the survey were emailed

In a recent study, process improvement experts were

to 50,000 U.S. and Canadian ASQ members, and 5,187

invited to participate in the research through their ASQ

members completed the survey. Pearson product-mo-

membership. The study used a quantitative approach

ment correlation analysis was used to determine the

to understanding the relationship between emotional

strength of the relationship between emotional intel-

intelligence and work engagement of process improve-

ligence and work engagement followed by simple re-

ment experts.

gression analysis to infer the predictability emotional

An online survey was used to collect data. The as-

intelligence had to work engagement.

sessing emotions scale was used to measure emotional

The primary research question was, Does a re-

intelligence, and the Utrecht work engagement scale

lationship exist between a process improvement ex-

was used to measure work engagement. Demographic

perts emotional intelligence and work engagement?

questions also were used to collect participant data for

Four secondary research questions focused on the re-

industry, gender and age (see Tables 1 and 2).

lationship between the four subelements of emotional

Work engagement
model / figure 2

Survey participants
industries / Table 1
Industry

Education

140

2.7

Business, secretarial and vocational

36

0.7

Educational services

48

0.9

0.2

Elementary/secondary (or K-12)

Higher education

Percentage
of total

48

0.9

Government

254

4.9

Healthcare

389

7.5

Hospitals

178

3.4

Medical and dental laboratories

72

1.4

Miscellaneous health and allied

services

126

2.4

Offices and clinics of doctors of

medicine

13

0.3

Manufacturing

2554

49.2

Chemicals and allied products

505

9.7

Electronics

294

5.7

Vigor

Work
engagement

Dedication

Absorption

Survey participants
gender and age / Table 2
Gender/age
Female

Percentage

n
2,021

39

19 to 25

23

1.1

26 to 35

304

15

36 to 45

532

26.3

Fabricated metals

354

6.8

Industrial machinery and computer

equipment

223

4.3

Measuring and controlling instruments

104

46 to 55

788

39

Medical devices

668

12.9

56 to 65

354

17.5

Transportation (automotive, aerospace

and rail)

406

7.8

20

1.1

Service

Over 65
Male

3,166

61

0.03
1.2

663

12.8

420

8.1

19 to 25

38

18

0.3

26 to 35

308

9.7

104

36 to 45

742

23.4

Transportation/logistics services

47

0.9

46 to 55

1,171

37

Wholesale/retail

74

1.4

56 to 65

766

24.2

1,187

22.9

Over 65

140

4.4

Consulting/business services
Entertainment/hospitality/recreation
Financial/insurance

Other
n = 5,187

18 or under

n = 5,187

May 2013 QP 37

intelligence and work engagement, and the three sub-

work environment that is becoming more common

elements of work engagement.

across the world, resulting in a loss of productivity,

Online Tables 1 and 2, found on this articles web-

workplace violence, absenteeism and illness.13

page at www.qualityprogress.com, summarize the

The authors suggested emotions used while on the

correlation and regression results of this study, which

job can provide information individuals can tap into,

discovered a positive relationship between emotional

that allows them to alter thinking and behaviors that

intelligence and work engagement, r(5,185) = 0.416, p

result in the ability to better handle organizational

< 0.001. A positive relationship also was found between

challenges more productively.

emotional intelligence and each of the subelements of

Individuals with high emotional intelligence, espe-

work engagement. Regression analysis indicated emo-

cially the ability to manage their emotions, are likely to

tional intelligence predicted 17.3% of the variability in

have the mental strength to stay positive even though

work engagement (R2 = 17.3 %, F(1, 5,185) = 1,086.85,

they face a toxic environment from time to time. This is

p < 0.001).

demonstrated by high levels of vigor in the participants.

This study also discovered a positive relationship

The ability to develop positive emotions and con-

between work engagement and the ability to manage

trol them may provide insight as to why those who can

emotions, r(5185) = 0.475, p < 0.001, which was the

manage their emotions are more engaged in their work.

strongest relationship between the emotional intelli-

Research suggests that when individuals feel positive

gence variables and overall work engagement. Regres-

emotions, they are better able to stay open-minded and

sion analysis indicated the ability to manage emotions

exert greater self-control, allowing them to cope more

predicted 22.6% of the variability in work engagement

effectively in a challenging work environment.14 Re-

(R2 = 22.6 %, F(1, 5,185) = 1,514.32, p < 0.001). To a

search also shows a work environment charged with

lesser degree, the remaining emotional intelligence

positive emotions can lead to greater engagement.15

and work engagement variables also were found to

Author Robert K. Cooper argued that if emotions

have a positive relationship, predicting a smaller per-

are managed, they can lead to greater commitment,

centage of work engagement.

trust and loyalty, which can result in higher productivity by individuals, teams and organizations.16

Research conclusions
A number of conclusions can be drawn from this re-

Implications of findings

search, specifically partial answers to the question of

This research has several implications for process im-

what drives engagement in the work of process im-

provement experts tasked with leading quality initia-

provement experts. The results suggest process im-

tives. Successful lean Six Sigma programs have been

provement experts who can control their emotions

shown to rely heavily on employees who are empow-

are likely to find greater engagement in their work and

ered and motivated.17

have the energy to mentally stay involved in their work

even when challenges arise.

This research provides a potential pathway to process improvement experts who want to better under-

The connection between managing emotions and

stand what leads to higher levels of work engagement.

work engagement likely goes much further than being

Unfortunately, having a better understanding will only

able to control emotion. Emotions can trigger positive

take them to a higher level of awareness, but will likely

and negative energy, but those who can manage emo-

yield little to no tangible results.

tion tend to have a positive perspective.

To truly harness the findings of this research, pro-

Having the ability to manage emotions comes from

cess improvement experts must work to develop their

overcoming challenges and expecting a good outcome

ability to manage emotions. By doing this, they may be

to arise from even the most difficult of situations. Indi-

able to increase their level of work engagement, and

viduals who can manage their emotions capitalize on

that could lead to greater individual and organizational

their ability to use a positive mood to overcome ob-

results.

stacles that may seem insurmountable.

The challenge then lies in how to improve emotional

Three authors argued emotional intelligence may be

intelligence. Can emotional intelligence be improved?

important for dealing with what they called the toxic

The debate has developed since the concept began to

38 QP www.qualityprogress.com

emotional intelligence

If emotions are managed, they can lead to greater

commitment, trust and loyalty, which can
result in higher productivity by individuals,
teams and organizations.
emerge in the late 1990s. Some researchers have ar-

were shown to increase more than 40% and 70%, re-

gued the similarities emotional intelligence has to per-

spectively, in the first two years after training. Boyatzis

sonality implies genetics play a key role in emotional

argued the results are much greater than the typical 2%

intelligence, which would suggest emotional intelli-

increase in social and emotional competencies found

gence might be difficult, if not impossible, to change.18

in traditional MBA students.21

Even geneticists, however, have challenged the

The long-term results also demonstrated the im-

nave assumption that nurture has no effect on na-

provements can be maintained. Even five to seven

ture.19

years later, participants had maintained more than a

60% improvement in self-awareness and more than a

Intentional change

40% improvement in social awareness over the base-

The work of Richard Boyatzis with MBA students at

line measures.

the Weatherhead School of Management at Case West-

Peter Salovey and David Caruso argued that writing

ern University in Cleveland offers another perspective.

and exercising are two ways of developing the ability

Boyatzis argued there are a set of competencies that

to manage emotions. The authors suggested the act of

all successful managers, professionals and leaders

writing is not what is important. What is important is

possess, including cognitive abilities (IQ), intraperson-

the element within the writing.

al skills such as self-management, and interpersonal

Caruso and Salovey offered several suggestions for

skills focused on relationships with others. The latter

what they called emotionally healthful writing:22

two are what Boyatzis described as emotional intelli-

Using positive words frequently.

gence competencies.

Using negative words in moderation.

The process of improvement prescribed by Boyatzis

is what he described as intentional change. Intentional change is a desired change in an aspect of who you
are (that is, your real self) or who you want to be (that
is, your ideal self) or both.20 The model developed by

Using causal words and phrases such as led me or

caused me to.
Using insightful words and phrases such as realize
and understand.
Caruso and Salovey suggested writing to a friend or

Boyatzis consists of five stages of discovery:

using a journal to capture emotions. The authors also

1. Discovering who you want to be: your ideal self.

argued what you write about is not important, stating

2. Discovering who you are, where your ideal self and

you can write about any event that lets you explore

real self are similar, and identifying the gaps that exist between the two.

your deepest emotions and thoughts.23

Physical exercise is another way to better manage

3. Establishing a learning agenda to close the gaps.

emotions. Caruso and Salovey said you dont need to

4. Developing new behaviors, thoughts and feelings

run or ride a bicycle for milessimply taking a short

that create new neural pathways that lead to mastery.

walk to collect your thoughts may be enough to help

5. Creating trusting relationships that help and encourage each stage.

manage emotions.24
Caruso and Salovey also described a technique

Boyatzis work has yielded significant results in

known as systematic desensitization that was devel-

MBA students enrolled in the training coursework.

oped by Joseph Wolpe as a method for staying open

Improvement in self-awareness and social awareness

to emotion.25 The process includes the following steps:

May 2013 QP 39

emotional intelligence

1. Determine the emotions that cause you the most

trouble.
2. Define a list of situations that create this emotion.
3. Rank the situations from the most to least emotionally intense.
4. Learn how to relax in these situations (for example,
muscle relaxation techniques, exercise and writing).
5. Create a pleasant and calming mood and relax.
Process improvement experts, especially those responsible for developing and executing lean Six Sigma
training, also should consider expanding their curricula, which tend to focus solely on the technical skills
required for lean Six Sigma (that is, project management, statistics and data collection) to also include the
emotional elements that may lead to greater engagement in projects, resulting in improved organizational
performance.

Small steps, big impact

This research offers a partial answer to the question
of what drives work engagement. The research found
emotional intelligence predicts a portion of work engagement; more specifically the ability to manage emotions may be the key emotional driver to creating work
engagement.
While the percentage of work engagement due to
emotional intelligence may seem small, consider the
size of the problem and what even a minor improvement in work engagement could mean to organizational performance.
The results of this research may not provide answers to the entire problem, but even a small portion
could make a sizeable financial impact.
The sad truth lies in the numbers describing the
current state of disengagement with work. Clearly, a
problem exists when the vast majority of individuals
each day go to jobs for which they have little passion.
Not only does the problem create a financial challenge
to organizations and the customers they serve, but
maybe even more importantlythe problem leads to

REFERENCES
1. Janet Jacobsen, Avoiding the Mistakes of the Past: Lessons Learned on
What Makes or Breaks Quality Initiatives, Journal for Quality and Participation, Vol. 31, No. 2, 2008, pp. 4-8.
2. Low Sui Pheng and Mok Sze Hui, Implementing and Applying Six Sigma in
Construction, Journal of Constructing Engineering and Management, Vol.
130, No. 4, 2004, pp. 482-489.
3. James P. Corrigan, The Art of TQM, Quality Progress, July 1995, pp. 61-64.
4. Herbert W. Hoover Jr., What Went Wrong With U.S. Business Attempt to
Rescue its Competitiveness? Quality Progress, July 1995, pp. 83-86.
5. Jacobsen, Avoiding the Mistakes of the Past: Lessons Learned on What
Makes or Breaks Quality Initiatives, see reference 1.
6. Rodd Wagner and James K. Harter, 12: The Elements of Great Managing,
Gallup Press, 2006.
7. Gallup Consulting, Employee Engagement: Whats Your Employee Engagement Ratio? 2008, www.gallup.com.
8. Towers Perrin/Towers Watson, Closing the Engagement Gap: A Road Map
for Driving Superior Business Performance, 2003, www.towerswatson.
com.
9. Aurelio Rivera and Jacob Flinck, Employee-led, Employee Engagement in
the Federal Government: SAMHSA Peoplefirst, Advances in Developing
Human Resources, Vol. 13, No. 4, 2011, pp. 479-493.
10. Andrew Milivojevich, Emotional Intelligence and Six Sigma, Quality
Progress, Vol. 39, No. 8, 2006, p. 45.
11. Peter Salovey and John D. Mayer, Emotional Intelligence, Imagination,
Cognition and Personality, Vol. 9, No. 3, 1990, pp. 185-211.
12. Arnold B. Bakker, Wilmar B. Schaufeli, Michael P. Leiter and Toon W. Taris,
Work Engagement: An Emerging Concept in Occupational Health and
Psychology, Work and Stress, Vol. 22, No. 3, 2008, p. 187.
13. Moshe Zeidner, Gerald Matthews and Richard D. Roberts, What We Know
About Emotional Intelligence: How it Affects Learning, Work, Relationships
and Our Mental Health, MIT Press, 2009, p. 302.
14. D. Robinson, A. Rafferty, J. Maben and E. West, What Makes a Good
Employer? The Links Between Effective Human Resource Practice, Staffing
Levels, Staff Involvement and Care Outcomes, The Global Workforce Initiative, International Council of Nursing, March 2005.
15. Izabela Robinson, Human Resource Management in Organizations, Chartered Institute of Personnel and Development, 2006.
16. Robert K. Cooper, Applying Emotional Intelligence in the Workplace,
Training and Development, Vol. 51, No. 12, 1997, pp. 31-38.
17. Xingxing Zu and Lawrence Fredendall, Enhancing Six Sigma Implementation Through Human Resource Management, Quality Management Journal,
2009, Vol. 16, No. 4, pp. 41-54.
18. Robert R. McCrae, Emotional Intelligence From the Perspective of the
Five-Factor Model of Personality, which appeared in The Handbook of
Emotional Intelligence: Theory, Development, Assessment and Application
at Home, School and in the Workplace, Reuven Bar-On and James D.A.
Parker, eds., Jossey-Bass, 2000, pp. 263-276.
19. Robert J. Emmerling, and Daniel Goleman, Emotional Intelligence: Issues
and Common Misunderstandings, Emotional Intelligence Consortium,
2003. www.eiconsortium.org.
20. Richard E. Boyatzis, Developing Emotional Intelligence Competencies,
which appeared in Applying Emotional Intelligence: A Practitioners Guide,
Joseph Ciarrochi and John D. Mayer, eds., Psychology Press, 2007, pp.
28-52.
21. Richard E. Boyatzis, Scott S. Cowan and David A. Kolb, Innovations in Professional Education: Steps on a Journey to Learning, Jossey-Bass, 1995.
22. David A. Caruso and Peter Salovey, The Emotionally Intelligent Manager:
How to Develop and Use the Four Key Emotional Skills of Leadership,
Jossey-Bass, 2004, p. 136.
23. Ibid, p. 137.
24. Ibid.
25. Joseph Wolpe, Psychotherapy by Reciprocal Inhibition, Stanford University
Press, 1958.

the potential of living a life without meaning.

There is little doubt many will find meaning outside
of their work, but for most, the time spent on the job
far outweighs time spent away from work. The hope is
that this research may guide those wanting to tap into
their emotional intelligence and provide some help in
the development of creating a vigor, dedication and absorption for and in their work. QP

40 QP www.qualityprogress.com

SCOTT THOR is an associate at Variance Reduction

International Inc. in Bakersfield, CA. He earned a
doctorate in management from George Fox University
in Newberg, OR. An ASQ senior member, Thor is a
SixSigma.us-certified Six Sigma Master Black Belt and
an ASQ-certified quality engineer, manager of quality/
organizational excellence and Six Sigma Black Belt.

OFFICE USE ONLY

Membership Application

MBKDF32
PRIORITY CODE _______________________
Order Number ________________________

Member Number ______________________

Industry: Healthcare Service

Government Education
Male Female
Manufacturing

Preferred Mailing Address: Home

Mr. Ms. Mrs. Dr.

Business

/ /
Date of Birth _________________________________
M

Member Type:
Full $143

The one geographic Section included with Full membership will be determined
by your primary address.*

____________________________________________________________________
First Name
Middle Initial
Last Name/Family Name

____________________________________________________________________
City, State/Province
Zip+4/Postal Code
Country
____________________________________________________________________
Home Address
Apt./Ste.
____________________________________________________________________
City, State/Province
Zip+4/Postal Code
Country
____________________________________________________________________
Area Code/Business Telephone
Area Code/Home Telephone
____________________________________________________________________
Preferred Email Address
Fax

Which one of the following best describes your title?

Accountant
Administrator
Advisor
Analyst
Associate
Auditor
CEO
Chemist
Clinician
Consultant

Contractor
Controller/
Comptroller
Coordinator
Director
Engineer
Facilitator
Foreman
General
Manager

Inspector
Instructor
Machinist
Manager
Mechanic
Nurse
Owner
Physician
President
Principal

Professor
Programmer
Retired
Scientist
Six Sigma
Black Belt
Six Sigma
Green Belt
Specialist
Statistician

Student
Superintendent
Teacher
Technician
Unemployed
Other

cccc cccc cccc

Contact ASQ to change your assigned Section.

Forum or Division Selection

As part of your Full membership you receive participation in one topic- or
industry-specific Forum or Division. Use the list below to indicate the Forum
or Division number and name.
included

_____ ______________________ $______________

(#)
Name
Additional Forums and Divisions may be added to all levels of membership.
Please indicate in the list below the additional Forums or Divisions you would
like and total the number you have selected.
Audit (19)
Automotive (3)
Aviation, Space and Defense (2)
Biomedical (10)
Chemical and Process Industries (4)
Customer-Supplier (15)
Design and Construction (20)
Education (21)
Electronics and Communications (5)
Energy and Environmental (11)
Food, Drug, and Cosmetic (7)
Government (22)
Healthcare (18)

Human Development and

Leadership (13)
Inspection (9)
Lean Enterprise (23)
Measurement Quality (17)
Product Safety and Liability
Prevention (25)
Quality Management (1)
Reliability (8)
Service Quality (16)
Six Sigma (26)
Software (14)
Statistics (12)
Team & Workplace Excellence (27)
Additional Forum and Division selections:
Full or Associate member ________ x $10 = $________________________
total

Total of all items (1-3):

Mailing Lists
Occasionally ASQ shares its mailing list with carefully selected quality-related
organizations to provide you with information on products and services. Please
check this circle if you do not wish to receive these mailings.

Payment Information
Check or money order (U.S. dollars drawn on a U.S. bank) Make check payable to ASQ.
MasterCard

Member Referred By:

_______________________
Member Number

Visa

American Express(Check one)

____________________________________________________________________
Cardholders Name (please print)
______________________________________________
Card Number

WHY DID YOU JOIN?

To help us understand whats important to you, please tell us the top three
reasons why you became an ASQ member.

Career Development
Certification Pricing
In-person Networking
Involvement in ASQs Cause
Involvement in SRO
Knowledge/Information
Leadership Opportunities
O
 nline Networking/Communities
Product Discounts
Training

$ _________

Please submit your application with remittance to:

ASQ does not sell email addresses to third parties.

_____________________________________
Member Name

$___________________

Sections (geographic) may be added to any member type for an additional

$20.00 each. Visit www.asq.org for a listing of available Sections.

,
,
_
$_______
Sections

____________________________________________________________________
Company Name
Job Title
____________________________________________________________________
Business Address
Ste.

Associate $85

___________________
Exp. Date

______________________________________________
Cardholders Signature
____________________________________________________________________
Cardholders Address

ASQ
P.O. Box 3066
Milwaukee, WI 53201-3066 USA
or fax to 414-272-1734.

You may also join online at www.asq.org

or by calling ASQ Customer Care at
USA and Canada: 800-248-1946
Mexico: 001-800-514-1564
All other locations: +1-414-272-8575

New memberships are effective upon receipt of payment. New members receive one year of membership from
the date they join. Members are billed prior to the anniversary date of their membership for next years dues.
Memberships, even those paid by employers, are nontransferable. All prices are subject to change.
In becoming an ASQ member, you have the duty to follow the ASQ Code of Ethics and Society governing documents.

Innovation Imperative

BY Peter Merrill

Risk and Development

Managing risk during new product development
I wrote my first Innovation Impera-

In this months column, I am going to

Some of the primary areas in which we

tive column for QP in January 2012,1 and

move beyond identifying the nature of the

need data (which, by the way, likely will

my practice has always been to take the

risks we must address and look at how we

not be crisp) are as follows:

issues theme and address it from an in-

manage those risks.

1. The time needed to develop a working

solution. At this stage, we are only at

novation perspective.
The January 2012 issues theme was

Fail early

concept.

risk. I discussed how risk enters the in-

My first key point is one you have prob-

novation process. I explained how risk is

ably heard beforefail early. The innova-

internal and external, and how organiza-

tion process has two phases: creative and

tions have become extremely risk averse

execution. The budget for the creative

as we have increased our understanding of

phase is typically only 20% of the total

risk. However, there is evidence that the

cost of getting a new offering to market.

more radical or innovative our new offer-

Clearly, the more we can weed out the

ing, the more profitable the outcome. But,

weak offerings in the creative phase, the

the more radical the offering, the greater

better the outcome.

the risk attached to it. In short, innovation

is a risky business.

The creative phase has two steps:

1. Identifying the opportunity.
2. Connecting the concep-
tual solution.
Focusing on the second step, physicist Linus

duce a working solution.

3. The cost to produce a working solution.
4. How radical is the new solution compared to current solution?
5. How easily can this solution be copied
by the competition?
6. Do we have in-house competencies to
produce the solution?
7. Who are the new suppliers we will
need, and what is the risk attached to
those suppliers?
8. What are the delivery chain choices and
the attendant risk?

Pauling said the best way

9. What price will the market bear?

to get a good idea is to get

10. The likely return on investment (ROI)

lots of ideas. To gener-

of the new product or service.

ate lots of ideasand

Those of you who live in the R&D

especially to generate

world will be familiar with the necessary

radical ideaswe must al-

data for developing a new product. Much

low these two steps in the

of this data will have wide tolerances at-

creative phase to operate

tached, but that does not excuse us from

in a loose or free mode.

collecting the data. It can often be helpful

At that stage, in fact, we

to provide support for data collection to

avoid even thinking about

the folks working on the proof of concept

risk.

if data collection is not their strength.

But after we have

42 QP www.qualityprogress.com

2. The probability of being able to pro-

Another issue to be aware of is the in-

generated our potential

troduction of bias into the data collection.

solutions, we do need to

This can happen so easily and is difficult

address risk. To do that,

to detect. Somebody sees a wild idea and

we need data. Unfortu-

says to themselves: Oh, Ill kill that right

nately, creative folks do

away, meaning, the person will use data

not always enjoy data

to reject the idea. And yet, that wild idea

collection, but it is vital to

may be the perfect solution to the op-

manage risks.

portunity we are addressing. Us engineers

The more we can weed out the

weak offerings in the creative
phase, the better the outcome.

tend to be good at data collection and

analysis, but we are not good at accepting
change and are extremely risk averse.
We may also have to generate data by
modeling or piloting a solution. Software
guru George E.P. Box said, All models are
wrong, but some are useful. Never lose
sight of that, but we must still do everything we can to develop data that will

risk. Call it utopia if you will, but that is

strategy of any organization. Without new

guide us in our choice of solutions.

where we aim. This idea can be illustrated

offerings, all businesses will eventually

in a three-dimensional risk tool (Figure 1).

die.

projects. They really were great fun. I

Lead the crowd

ogy-based business, the link is not always

worked on, among others, desalination by

British financier James Goldsmith said,

healthy between the research people

vapor recompression, radical countercur-

If you see a bandwagon, its too late. In

producing data or proof of concept and

rent liquid-liquid extraction and the early

other words, dont follow the crowd. Its

the strategy people making the decisions.

days of carbon fiber.

far more profitable to lead the crowd.

Ironically, the less scientific the organiza-

In my early years as a chemical engi-

Unfortunately, in a science and technol-

neer, I worked on some exciting pilot plant

We have to be careful to ensure these

One of the tools I like for evaluating

tions, often the better the link.

projects do not take on a life of their own.

risk data is a modified version of design

Another factor is organization size.

They are there to generate data. At the

failure mode and effects analysis. There

When I worked in R&D, I was in a major

same time, we must not isolate the people

are a number of other tools and combina-

chemical corporation and the research

running a pilot. They must be connected

tions of tools, but I dont want to dwell

division was almost an entity of its own.

to the bigger project.

on the use of these tools in evaluating

Connecting to the forward strategy of the

risk levels. I am going to stay focused on

business was a challenge.

After we have the dataand unfortunately it will not all arrive in perfect

With these factors in play, strategic

managing risk.

formwe have to start making decisions.

After we have collected the data, we

decisions often become minor adjust-

The body of data is probably going to be

need to make decisions. It is essential to

ments of last years activities instead of

complex, but we must not lose sight of our

narrow focus to manage risk. The deci-

forward-looking strategies with innovative

end goal. We want the most radical new

sions are based on business need and

new offerings.

offering with the best ROI at the lowest

capability, and form the critical forward

The perfect world

/ Figure 1

The job of strategists is to make choic-

Project risk vs. time scale

/ Figure 2

Aim here

High
High

High ROI
Highly radical
Low risk

Try a few of
these ideas

Healthy
companies
also invest
here

Medium

ROI
High
High

Radical

Risk
Low

ROI = return on investment

Low

Pressure to
invest here
2 years

4 years

6 years

May 2013 QP 43

Innovation Imperative
es and develop the new product portfolio.
The portfolio must be a mix of short,
medium and long-term projects. The size
of the mix will depend on the size of the
business. A small to medium-sized enterprise will have probably only two or three
selections. However, we should never put
all our eggs in one basket and focus on

Businesses must have a longterm strategy looking into the

future. This is the seed corn
for tomorrows business.

one new offeringthat is far too high a

risk. Figure 2 (p. 43) shows how project

tinues to gain knowledge about the new

ing a supplier, but that is often bad strat-

risk relates to project time scale.

offering. As a result, the risk numbers will

egy. There are many ways to mitigate sup-

change and we must manage this.

plier risk, including the use of inventory,

The packaged goods industry invests

heavily in short-term offerings, putting

One of the toughest challenges here is

on-site presence and technical support.

more than 30,000 products a year on the

killing an idea that does not pan out but

shelves. More than 70% of those products

that passed the first cut with the strategic

ficult to manage. This is where we start

die within a year. If this is low cost, then

planners. This idea will almost certainly

to give away our secrets. A good strategy

that is a reasonable strategy. But every

be somebodys baby and there will be a

here is to partner in the early days with

business must have a long-term strategy

lot of emotion involved. People will even

a chosen customer or distributor. I used

in which it looks as far as 10 years into

mask new data to keep an idea alive.

this strategy frequently when I ran a

the future. This is the seed corn for

tomorrows business.
For example, Xerox found that it had

New data must be thoroughly analyzed

Delivery chain risk is often more dif-

leading brand in the United Kingdom. It

at each design review meeting. Design

is an excellent way of improving speed to

review meetings are notorious for not

market.

to wait an average of 7.5 years for an

clearly recording decisions. The design

acceptable ROI on its best innovations.

review also must be hardwired to the

Risk in innovation

Unfortunately, the pressure for short-term

strategic planning activity. The skills of

Initially, we create many options in the

performance inhibits most companies

the strategic decision maker lie in allow-

creative phase while risk is low. Success

from taking this long-term view. But its

ing enough rope in development, but not

depends on collecting good data while

important to only use ROI as a guideline.

too much for people to hang themselves.

still in the creative phase of the new

Think logarithmically: Is revenue going to

Its also important to remember that this

offering. We then narrow our focus in

be $10,000, $100,000 or $1 million?

refreshment of risk data is not an annual

creating the new product portfolio based

activity. It should be done continuously

on our aim to produce the most radical

The development stage

and should typically be reviewed on a

new offering with the best ROI at the

After decisions have been made and the

quarterly basis.

lowest risk.

the start of managing risk. There is often

External risk

strong link between the subsequent

the false assumption that risk will not

I have focused on risk attached to the

development stage and the strategic deci-

change. But we now leave the research

new offering, but there is another impor-

sion making as risk data becomes more

stage and enter the development stage.

tant area of risk that is often neglected:

precise. QP

Organizations are often structured

external risk. This is split into supplier

To achieve this, we must retain a

portfolio agreed upon, we are still only at

incorrectly by bundling R&D together.

or subcontractor risk and delivery chain

References

Research should partner with marketing;

risk. In my January 2012 column,2 I

development should partner with opera-

quoted data showing that with four new

1. Peter Merrill, Risky Business, Quality Progress, January

2012, pp. 50-51.
2. Ibid.

tions. Not many organizations do this,

suppliers, three had a 90% probability of

but for successful innovation you need to

delivering and the fourth had a 40% prob-

give it serious thought.

ability. The overall probability of the new

In the development stage, we take a

offering coming together is only 29%.

concept and develop it into a working

We must evaluate and then manage

solution. The development stage con-

supplier risk. It may even mean purchas-

44 QP www.qualityprogress.com

Peter Merrill is president of Quest

Management Systems, an innovation
consultancy based in Burlington, Ontario. Merrill is the author of several
ASQ Quality Press books, including Do
It Right the Second Time, second edition (2009), and Innovation Generation
(2008). He is a member of ASQ and
chair of the ASQ Innovation Interest Group.

Quality in the First Person

BY Fitz-George a. Carty

Whos on Top?
Quality can be an uphill battle
Im puzzled by the approaches that

the foreman, so I left it up to the inspec-

his surprise, frustration and dismayhis

many leaders use to engage their employ-

tors to find the damaged parts.

supervisors were angry at him because he

gave suggestions to the engineer. Going

ees. Instead of inculcating the pride of

workmanship, initiative and openness,

Facing fear

forward, they forbade him to stick his

many leaders encourage a fear-driven

A few years later, while working as a

nose in quality-related matters again.

and reactive work culture by instituting

laboratory shift technician for another

limiting and detrimental work systems

manufacturer, I experienced another

A quality revelation

and policies. Throughout my career, I have

disturbing event. I found that a process

I am sure that most of us have found

witnessed these counterproductive efforts

had continually generated off-target

ourselves in similar situations. Maybe we

again and again.

resultsbut not during the other techni-

conformed to shoddy work practices be-

cians shifts. My persistence in reporting

cause we feared being different or feared

The real world

the off-target results caused my supervisor

ridicule from our peers or supervisor.

My first summer job in college was as

to berate me.

an assembly line worker at a major auto

My eyes were opened and my confi-

After a major customer complained

dence was revived when I discovered

company. On my first day, the supervi-

months later, it was discovered that my

the world of quality management and

sor introduced me to the foreman, who

results were correct and that the other

the teachings of W. Edwards Deming. I

provided me with a 10-minute training

technicianswho feared criticism from

experienced a feeling of redemption when

the supervisorhad

I realized that two of Demings 14 points

padded their results.

on quality management reinforced the

Recently, a friend

importance of reducing fear and called

turned to me for advice.

for the elimination of mass inspection

My friend, who is em-

of products. I discovered there are work

ployed by a parts manu-

systems that supported employee involve-

facturer, explained that

ment, initiative and empowerment.

an overseas customer

by supervisors who manage with an iron

ing parts. An engineer

fist. They continue to produce timid and

at my friends com-

crisis-driven organizational cultures. As a

pany enlisted his help

result, organizations destroy the commit-

to resolve the problem.

ment of their employees and the pride of

We discussed some ap-

workmanship that maximizes creativity

proaches to find the root

and innovation. The quality professional

cause and implement

must not be discouraged. We must fear-

a solution. My friend

lessly promote the power of quality in

session before I was left on my own to

passed on the suggestions to the engineer.

work. Inexperienced and new, I followed

At the companys management meeting,

the procedures as carefully as I could.

the engineer presented the ideas and gave

My slower pace attracted the attention

my friend full credit. The plant manager

of my co-workers and the assembly line

ordered that the suggestions be imple-

foreman. They shouted, Let the bloody

mented immediately. Soon, the number of

parts run, the inspectors will catch them.

rejected parts fell.

I feared ridicule from my co-workers and

Many organizations are still populated

had rejected incom-

My friend called me afterward to share

transforming the workplace. QP

FITZ-GEORGE A. CARTY is a behavioral

and organizational change practitioner in Decatur, GA, and an associate
of Interact Performance Systems Ltd.
in Anaheim, CA. He holds a masters
degree in management from Antioch
University in Seattle. Carty is an associate member of ASQ.

May 2013 QP 45

Standards Outlook

BY Sandford Liebesman

World View
Risk management is a must in todays global economy
the global economy has provided

Risk and analysis

organizations with many opportunities that

Four types of risk worry an organization:

didnt exist even 10 years ago. On the other

1. Strategic risk is concerned with the

ronmental standards and specifications.

4. Organizational risk is based on the
organizations structure and is found

hand, the internet and extensive outsourc-

inability to achieve high-level goals. To

on two levelsthe entity level and the

ing from the United States to countries

assess it, management should consider

activity level. External factors affecting

such as China and Mexico have flattened

technology changes, creditors de-

organizational risks include technology

the Earth, presenting organizations with

mands, competitors actions, economic

developments, competition and new leg-

many new risks.

and political conditions, and customer

islation. Internal factors are information

needs.

system processing, quality of person-

The designers of the Committee of

Sponsoring Organizations of the Tread-

2. Operational risk concentrates on fac-

nel hired and changes in management

responsibilities.

way Commission (COSO) Internal Con-

tors that prevent the efficient use of

trolIntegrated Framework, the guidance

resources. Factors include the manage-

document commonly used to ensure com-

ment system, customer satisfaction,

analysis method is to determine the risk

pliance to the Sarbanes-Oxley Act (SOX),

the supply chain, revenue recognition,

appetite and risk tolerance. This is neces-

recognized as early as 1992 the importance

natural disasters, information security

sary so all who are part of the organization

of risk management by including it as one

risks and the logistical risks of home-

can understand the risk philosophy. Risk

element of the system of internal control.

land security.

appetite is the amount of riskon a broad

Now, ISO 9001 developers are including

risk in the 2015 revision.

3. Compliance risk affects the ability to

The first step in one particular risk

levelan entity is willing to accept. Risk

conform to legal and regulatory require-

tolerance relates to the amount of risk

There is an assessment process that

ments. These risks focus on financial,

acceptable for each of the entitys specific

can be used to manage risk to an organiza-

environmental, health and safety, and

objectives.

tions objectives. The process consists of

security factors. Government man-

defining the objectives, specifying the risks

dated environmental, health and safety

to determine the risk level and manage

to the objectives and defining methods of

requirements cause concern because of

the risks of concern. One key tool is an

managing the risks. The objectives should

the risk of fines, shutdowns or criminal

organizations set of financial and quality

be measurable so the effect on them can

prosecution. There is also a concern

controls. A control is a tool that can be

be determined.

about conformance to quality and envi-

used to identify and manage risks. These

After this is decided, there are tools

are especially important for using the

COSO guidance to comply with SOX and
will be important for certification to the
next revision of ISO 9001.
Financial controls are set up in accordance with generally accepted accounting principles. They provide reasonable
assurance that transactions are recorded
as necessary and include accurate maintenance of records. They also may be used
to provide reasonable assurance regarding
prevention or timely detection of unauthorized acquisition or disposition of assets or
other examples of fraud.
Quality controls are built around qual-

46 QP www.qualityprogress.com

ity records and decision points. In ISO

9001, controls appear as shall statements.
For example, clause 5.6.1 requires top
management to review the organizations
quality management system at planned intervals, to ensure its continuing suitability,
adequacy and effectiveness.
SOX compliance includes financial con-

Organizations should start their

risk management development
with an open discussion of risk
and its effect on the organization.

trols at the entity and activity levels. The

controls are used in a top-down, risk-based

was originally developed in the 1980s in re-

with sufficient clarity to enable the

approach defined in the Public Company

sponse to the savings and loan scandal. It

identification and assessment of risks

Accounting Oversight Board auditing stan-

is used for internal control over operations

dard AS5 and the Securities and Exchange

and for compliance to external financial

Commission management guidance.

reporting requirements. COSO consists of

achievement of its objectives and ana-

five elements used to manage systems of

lyzes them as a basis for determining

Examples and tools

internal control:

Lets look at an example of risk manage-

1. Risk assessment: The possibility that

ment at a teaching hospital.1 One of the

an event will occur and adversely affect

major risks at hospitals is patient falls,

the achievement of objectives.

which are a major contributor to the aver-

2. Control environment: The set of

relating to the objectives.

The organization identifies risks to the

how the risks should be managed.

The organization considers the potential
for fraud in assessing risks to the
achievement of objectives.
The organization identifies and assesses

age length of stay. The Joint Commission,

standards, processes and structures

changes that could significantly impact

which accredits healthcare organizations,

that provide the basis for carrying out

the system of internal control.

has developed tools to help manage risk

internal control across the organization.

Organizations should start their risk

management development with an open

and requires use of the tools to maintain

3. Control activities: The actions estab-

accreditation. When the teaching hospital

lished by policies and procedures to

discussion of risk and its effect on the

conducted a risk assessment and estab-

help ensure that management directives

organization. The discussion should cover:

lished quality controls, it found that detailed

to mitigate risks are carried out.

An overview of the risk management

intervention procedures and additional

training in fall prevention were required.
As another example of the expansion
of the risk management philosophy, all
management system standards will now

4. Information and communication:

Communication occurs internally and
externally, and provides information to
carry out internal control activities.
5. Monitoring activities: Ongoing and

method and common tools.

A case study illustrating use of the
method.
A preliminary look at the new ISO 9001
risk management requirements.

be required to adopt the structure defined

separate evaluations are used to deter-

Its also important to understand how

in ISO Guide 83. This will directly affect

mine whether the five components of

the COSO guidance incorporates risk man-

ISO 9001 and ISO 14001, as well as other

internal controlincluding controls that

agement into an organization, and that the

International Organization for Standard-

affect the principles within each compo-

implementation of risk management must

ization (ISO) standards. In ISO 9001, the

nentare present and functioning.

be consistent across the organization. QP

The COSO Internal ControlIntegrat-

Reference

first three clauses will remain the same as

in ISO 9001:2008, but clauses 4 to 10 will

ed Framework has been updated from its

be different. Clause 6 is the one that will

1992 framework in the areas of technology,

include risk management.

globalization, governance and the integra-

ISO 9001 and the COSO internal control

tion of controls with risk. The revised

guidance document are both used to

framework also specifies 17 principles that

comply with the requirements of SOX.

represent the fundamental concepts as-

While they cover different activities in an

sociated with a system of internal control.

organization, both current versions need

The principles associated with risk assess-

updating.

ment are:

COSO is a management system that

The organization specifies objectives

1. Sandford Liebesman, Competitive Advantage: Linked

Management Systems, Paton Professional, 2011.

Sandford Liebesman, president

of Sandford Quality Consulting in
Morristown, NJ, had more than 30
years of experience in quality at Bell
Laboratories, Lucent Technologies
and Bellcore (Telcordia). He is an ASQ
fellow and past chair of the Electronics and Communications Division.
Liebesman also is a member of the U.S. Technical Advisory
Group to ISO Technical Committee 176 and the ANSI Z1
Subcommittee on Quality Management.

May 2013 QP 47

Statistics Roundtable

BY Roger W. Hoerl
and Ronald D. Snee

One Size Does Not Fit All

Identifying the right improvement methodology
THE NEED TO improve is ever present in

install a new computer system. We assign a

The problem is categorized into one

all endeavors and will continue to be so.

project manager to implement the solution.

of four quadrants in the matrix that helps

We live in a dynamic world. As predicted

Knowing the problem solution does not

identify the best solution method. Note that

in the second law of thermodynamic and

mean the solution is easy or unimportant.

the listed methods are illustrative, but not

entropy, the world will continue to change.

For example, a person might know why

exhaustive; other methods could be added.

This change produces a need for improve-

he or she is overweight, and what must be

Lets look at some examples that illustrate

ment; we have learned that if left alone,

done about it. Keeping weight off is not

how the matrix is used.

things get worsenot better.

easy, however. A key question is, How?

Lean Six Sigma is generally considered

to be the best available approach to im-

That is, How to implement solution?

If the solution is unknown, we dont

Case 1. Last year, we presented a case

study in which a company that manufactures flushable baby wipes found that its

provement: true for a lot of problems, but

know why we have this problem. The key

product was clogging septic systems.4

not all problems. In improvement, one size

question is, Why? That is, Why is this

Obviously, this was a serious problem

does not fit all. We have argued a holistic

problem occurring, or what is the root

for the company, but was also clearly a

improvement approach is needed, with the

cause? Here, a problem-solving approach

special cause: This hadnt happened in the

four critical building blocks being: leader-

and mindset is needed.

past and occurred suddenly. This sug-

ship, top talent, infrastructure and holistic

Both kinds of problems are impor-

gested that the problem had relatively low

improvement method,1-3, meaning it can

tant to the success of an organizations

complexity. However, the solution and the

handle any problem.

improvement initiatives. In fact, a blend of

root cause were unknown.

The problem, of course, should define

solution-known and unknown problems

This placed the problem in quadrant

the improvement method. To help get to the

is the rule rather than the exception. The

two. The company chose a team problem-

principal difference is that approaches to

solving approach, using techniques such

discover the best solution are needed in

as brainstorming, Pareto charts and run

solution-unknown problems.

charts. The root causes and appropriate

solutions were found using these basic

Problem complexity

tools, resolving the problem and returning

Another critical consideration is the com-

the process to normal.

plexity of the problem. Problems with low

Case 2. One of this columns authors

complexity are typically isolated prob-

was once asked by an IT professional

lems: problems involving a special cause.

to help him on his Six Sigma project. It

The important question here is, What

turned out that he wanted to install an

went wrong? You find the root cause, fix

Oracle relational database to replace a

it and return to normal.

manual system. The author asked him

Problems with high complexity typi-

whether he had done this before, and he

correct characterization of the problem, it

cally involve the entire system and involve

replied yes. So the author asked the IT

is helpful to evaluate two critical variables:

working on common-cause variation:

professional whether he felt he knew how

whether the solution to the problem is

Theres no special cause to fix. Here, an

to do this, and again he said yes.

known and the complexity of the problem.

improvement approach such as lean Six

When presented with a need to im-

Sigma may be appropriate.

Looking at the matrix, this was clearly

a solution-known problem. Even though he

prove, the first question we must ask our-

Taken together, these two variables

had done it before, the problem had high

selves is whether we know the solution to

create a matrix (see Figure 1) that is help-

complexity because it could easily be mis-

the problem. Examples of a solution-known

ful in identifying an appropriate problem-

managed with serious consequences. Also,

problem might be to pave the parking lot or

solving method.

the details of how to deploy the database

48 QP www.qualityprogress.com

The team used an approach similar to

and phase out the manual system were not

project. For example, one team was re-

obvious. It was clearly process improvement

what today would be called lean manu-

sponsible for identifying appropriate data

versus problem solving; the intent was to

facturing. The mill was designed and built

sources as the basis for predictive models.

take the process to a new, higher level of

using these lean manufacturing principles

This task was solution-known, low com-

performance. Therefore, it was a quadrant

and methods.

plexity (quadrant one).

three issue. A reengineering approach was

Case 4. In our book, Six Sigma Be-

used, including lots of mistake proofing and

yond the Factory Floor, we discuss a proj-

but the team knew what was needed

project management rigor.

ect that involved development of a model

(good data covering defaults and non-

It was still important, and nontrivial,

Case 3. The same author also was

to predict corporate loan defaults in the

defaults for more than 20 years), so the

involved in the design and building of a

context of statistical engineering.5 There

solution was known. There was a problem

new, state-of-the-art paper mill, which

was no special cause to fix, and clearly

to be fixed: lack of data. The team knew

involved the application of recent develop-

predicting companies that are likely to de-

the sources to visit to obtain it. They used

ments in manufacturing excellence. This

fault is highly complex. Further, there was

a Nike approach: Just do it. Expertise was

was a solution-known problem because

no known solution, which put this project

needed, but a formal approach wasn't.

the team knew what it wanted to build,

into quadrant four.

Another team had to develop a formal

but figuring out how to build the facility

The team used the Six Sigma ap-

definition of default because no gener-

and develop detailed work processes were

proachspecifically, design for Six

ally accepted definition existed; they used

quite complex. Therefore, we view this as

Sigmato attack the problem. Further,

a WorkOut to do this (quadrant one again),

a quadrant three project.

there were some subprojects to the overall

pulling a team together to discuss this

Methodology options in process

improvement / figure 1
Solution known

Low complexity

Type of problem

any formal tools.

Case 5. Author Thomas McGurk wrote
about a major corporate change initiative
to improve the supply chain capability

of a large biopharmaceutical company.6

WorkOut.
Nike projects.

Team problem solving* (Problem

Kepner-Tregoe.
solving
special cause)
Why did it happen?

In looking at the details of this initiative,

Who will address it?

By when?

High complexity

Solution unknown

problem and work out a solution without

ments of all four quadrants from Figure 1.

For example (see Figure 2):

Lean (kaizen) event

reengineering.

Lean Six Sigma,

Taguchi methods,
TRIZ.

How should we
implement the
solution?

we believe the overall effort included ele-

What is the solution?

Conducting bottlenecking analyses of

(Process
improvement
common cause)

equipment and people (quadrant two).

Improving process yield and reducing
batch release time (quadrant four).
Creating new quality specifications for

*Structured team problem solving, using the magnificent seven tools, for example.

critical raw material (quadrant two).

Creating a 50-parameter process moni-

Biopharm process improvement

problems / figure 2
Solution known

Low complexity

1
Leadership training for
management.

Solution unknown
2
Bottlenecking analysis of equipment
and personnel.

Skills training for process

operators.
High complexity

3
Create 50-parameter
measurement system.

toring measurement system to aid the

control of the manufacturing process
(quadrant three).
Leadership training for the management
team and operating skills training for the
process operators (quadrant one).
It is not surprising that all four quadrants are used because this problem was a

4
Improve process yield.

major initiative conducted during a one to

Reduce batch record release time.

more than 50% for two major products, en-

two-year period. Capacity was increased

May 2013 QP 49

statistics roundtable
suring the blockbuster drug supply would

As noted previously, we feel that the

approach should be based on the problem,

satisfy market demand.

These applications of the matrix and

not the other way around, and no one

other experiences show that:

method is universally best. We have found

Many, perhaps most, problems will fall

this matrix works well in guiding practitio-

into one or more, but not all, of these

ners in diagnosing the best approach to a

quadrants. This is natural and to be

given problem, and we recommend it for

expected.

your consideration.

After we know the quadrant or quad-

Of course, it is not a prescriptive

rants the problem occupies, the possi-

system. It should serve as a guide and not

bilities for identifying the right improve-

dictate the approach to be taken. Further,

ment method are greatly enhanced.

it is not exhaustive; many more methods

The problem-solving speed and accu-

could be added to the matrix. Use of such

tools to guide improvement efforts is an

racy is increased.
Probability of success is increased.
Many practitioners have told us over
the years that they understand different
methods, such as lean Six Sigma, kaizen
events, reengineering and WorkOut, but
they are confused as to which improvement approach is the best. They also wonder if one method is best for all problems.

example of statistical engineering, a topic

we have discussed in detail in earlier Statistics Roundtable columns.7-9 QP
REFERENCES
1. Ronald D. Snee and Roger W. Hoerl, Six Sigma Beyond the
Factory Floor, FT Prentice-Hall, 2005.
2. Ronald D. Snee and Roger W. Hoerl, Integrating Lean and
Six Sigma: A Holistic Approach, Six Sigma Forum Magazine, May 2007, pp. 15-21.
3. Ronald D. Snee, Digging the Holistic ApproachRethink

Business Improvement to Improve the Bottom Line, Quality Progress, October 2009, pp. 52-54.
4. Roger W. Hoerl and Ronald D. Snee, Statistical Thinking;
Improving Business Performance, second edition, John
Wiley and Sons, 2012.
5. Snee, Six Sigma Beyond the Factory Floor, see reference 1
6. Thomas L. McGurk, Ramping Up and Ensuring Supply
Capability for Biopharmaceuticals, BioPharm International,
January 2004, pp. 1-4.
7. Roger W. Hoerl and Ronald D. Snee, Closing the Gap, Quality Progress, May 2010, pp. 52-53.
8. Ronald D. Snee and Roger W. Hoerl, Further Explanation,
Quality Progress, December 2010, pp. 68-72.
9. Ronald D. Snee and Roger W. Hoerl, Proper Blending,
Quality Progress, June 2011, pp. 46-49.
2013 Roger W. Hoerl and Ronald D. Snee
ROGER W. HOERL is Brate-Peschel assistant professor of statistics at Union
College in Schenectady, NY. He has
a doctorate in applied statistics from
the University of Delaware in Newark.
Hoerl is an ASQ fellow, a recipient of
the ASQs Shewhart Medal and Brumbaugh Award, and an academician in
the International Academy for Quality.
RONALD D. SNEE is president of
Snee Associates LLC in Newark, DE.
He has a doctorate in applied and
mathematical statistics from Rutgers
University in New Brunswick, NJ.
Snee has received ASQs Shewhart
and Grant Medals. He is an ASQ
fellow and an academician in the
International Academy for Quality.

ASQ Enterprise and Site Members

These organizations have pledged their commitment to quality by becoming ASQ Enterprise or Site members. Learn more
about these membership levels, and the benefits, by visiting asq.org/organizations.

Enterprise Quality Roundtable Members

3M Company
Abbott
Abu Dhabi Water &
Electricity Authority
Alcoa
Barclays PLC
Baxter International
BD
Bechtel
Bharat Electronics Limited
Boeing
Booz Allen Hamilton
CareFusion Corporation
Caterpillar Inc.
Cisco
The Coca-Cola Company
Cummins

50 QP www.qualityprogress.com

Deere & Company

DCMA (Defense Contract
Management Agency)
The Dow Chemical Company
DuPont
FedEx
Ford Motor Co.
General Electric
General Motors
Genpact
Goodrich
Hewlett-Packard
Honeywell International
Ingersoll Rand
Intel Corporation
Kimberly-Clark Corporation
Kohler Company

Enterprise Corporate Members

Kraft Foods
L-3 Communications
Lockheed Martin
Mattel
Northrop Grumman
Raytheon
RIM
Siemens
Tata Group
TE Connectivity
Textron
Turkish Airlines Inc.
UnitedHealth Group
Xerox

Aerojet
Aerotek
Banner Pharmacaps Inc.
City of Milwaukee
Ivy Tech Community College
Orkin LLC
Pinal County Clerk of the Superior Court
Xchanging Technologies Services
India Pvt. Ltd.

ASQ Site Members

Abu Dhabi Systems &
Information Centre
Accellent
Accuride Wheels Camden
Actavis Elizabeth LLC
Aditya Birla Management
Corporation Ltd.
AECL
AFLAC
AFPSL/Bionetics
AGCO Corp.
AGCO Hesston Operations
Agilent Technologies
AIB International
Alberta Health Services
Alcon Laboratories Inc.
Alere
Alexian Brothers Community
Service PACE St. Louis
Allcast Inc.
Allergy Laboratories Inc.
Alliant National Title Insurance
Altria Client Services Quality
American Axle and
Manufacturing (2)
American Axle Manufacturing
Mexico S.R.L. de C.V.
American Eurocopter
American Family Insurance
American Packaging Corp.
American Red Cross
AMN International S.A. De C.V.
Ana G. Mendez University
System
Analogic Corporation
Andersen Corporation
Applied Medical
Aptar
Arbitron Inc.
Arctic Cat Inc.
Arthrex Inc.
Asco Valve Manufacturing
Ashley Furniture
ASR International Corporation
AssurX Inc.
ATCO I-Tek
Auto Club Insurance
Association
B&W Pantex
B&W Technical Services Y12 LLS
Bard Juarez
Bartush-Schnitzius Foods Co.
Bastion Technologies Inc.
Bath Iron Works
Baycare Health System
BC Public Service Agency
Beacon Converters Inc.
Benchmark Electronics
Bendix CVS
BEPC Inc.
BG Products
Biomet Inc.
Bio-Rad Laboratories

BioReliance Corporation
Bio-Tissue Inc.
Bison Building Materials
BJC Healthcare
Blue Cross Blue Shield Arizona
Bonfils Blood Center
Bonneville Power
Administration
BorgWarner Turbo Systems
Boston Scientific (4)
Botswana National Productivity
Bridon American Corp.
Briggs & Stratton
Brigham Young University
Brookhaven National Laboratory
Bunn-O-Matic Corporation
Bureau Veritas Certification
Hong Kong
Bureau Veritas Consumer
Products Services Inc.
Business Excellence
Consulting Inc.
CACI
Calsonic Kansei North America
Cameron International
Cangene Corporation
Candu Energy Inc.
Cargill Inc.
Carlisle Interconnect
Technologies
Carpenter Technology Corp.
Casa Cuervo S.A. De C.V.
Cedarburg Pharmaceuticals, Inc.
Celerity IT LLC
Celestica International Inc.
Cementos Lima S.A.
Center for Applied Technology
Development
Center Quality Office
Century Metal Spinning Co.
Cerner Corporation
Cerner Corporation
Innovations Campus
Cerveceria Polar Los
Cortijos C.A.
CGS Administrators
Chemonics International
Cherokee Nation Industries
Chicago Department of
Public Health
ChildNet Inc.
Childrens Hospital
of Philadelphia
Christian Brothers University
Chrysler Group
CIBA Vision Corporation
Cincinnati Precision
Instruments Inc.
Climax Portable Machine
Tools Inc.
Cobham Life Support
Coherent Inc.
Coloplast
COMFRC

Commercial Aircraft Corp.

of China Ltd.
Composite Engineering Inc.
ConAgra Foods
Conceptus Inc.
Conemaugh Memorial
Medical Center
Conestoga Wood
Specialties Corp.
Convergys
Cosmetica Laboratories Inc.
Council of Aging of
Southwestern Ohio
Covidien (4)
CPI Aero
CR Bard Glens Falls Operations
Creation Technologies LP
Credit Suisse
Crosspoint Engineering
Crown Equipment
Corporation (2)
CSL Behring
CVS Caremark
Czech Society for Quality
Dart Container Corp.
Deaconess Hospital
Decra Roofing Systems
Delaware Division of
Public Health
Dell (China) Ltd. Co. Shanghai
Dendreon Inc.
Department of Health and
Human Services
(DHHS/ASPR)
Department of National Defense
Detroit Diesel Remanufacturing
DeVry Inc.
Digi-Key Corp.
Digital Payment Technologies
DLA Troop Support
Dormont Manufacturing Co.
DTI DiversiTech Inc.
Dubai Silicon Oasis Authority
Ducommun Technologies Inc.
Duke Energy
Dwight David Eisenhower
Army Medical
DynMcDermott Petroleum
Operations Co.
DZSP 21 LLC
Eagle Wings Industries Inc.
Eastman Chemical Company
East Penn Manufacturing
Co. Inc.
Ebay Europe Services Ltd.
Eldre Corp.
Eli Lilly & Co.
Elsevier BV Bibliographic
Databases
EMD Millipore
EMI Industries
Embraer Executive Aircraft Inc.
Emirates Telecommunication
Corp. (Etisalat)

Energizer Battery Co.

Energizer Personal Care
Energy & Environmental
Research Center
EnerSys
Enterasys Networks
Erickson Air Crane
Ethicon Inc. (2)
Evans Capacitor Company
Evans Consoles Corporation
Express Scripts Inc.
FAA DOT
Federal Aviation Administration
Federal Bureau of Investigation
First Quality Retail Services
Fleet Readiness Center
Southeast
Flexfab Division of FHI
Flexial Corporation
Flight Systems Electronics
Group
FLIR Systems Inc.
Florida Hospital
FMC Technologies Inc.
FMIMedical
Food & Drug Administration
ForceOne Solutions Inc.
Fort Hays State University
FRCSW IQAD DoD
Fujifilm NAGSD-K
FUNDECE
G&D America
GECOM Corporation
General Systems Company
Genesis Healthcare System
Gen-Probe Incorporated
Genzyme
Getinge Infection Control
GM Nameplate Inc.
Goodwill Industries of
Southeastern WI Inc.
Gopher Resource Corporation
Grande Cheese Company
Grant Thornton
Green Tweed Co. Inc.
Grifols Academy Biomat USA
Grupo Antolin Silao S.A. de C.V.
GTS
Haddad Brands
Harris Corporation (2)
Harris IT Services (2)
Haworth Inc.
Hemofarm Stada
Hengst of North America
Henkel Corporation (2)
Hertzler Systems Inc.
Hitachi Computer
Products (America)
Honda Lock America
Hospira, Inc.
HSN
Huawei Technologies Co. Ltd.
Humana Inc.

The Hunoval Law Firm

Hunting Dearborn
Hussman
Hyundai Motor
Manufacturing Alabama
IACT Global
iBASEt
ICS-ABSG
IdaTech
Igate Computer Systems Ltd
IIT Delhi
IMS
IMSM Inc.
Incertec
Indo-US MIM Tec. PVT Ltd.
Institute of Health Management
Research, Bangalore
Integrated Project
Management Co. Inc.
Integrys Energy Group
International Game Technology
Intertek Testing Services
NA Inc.
Ispen Biomeasure
ITM University
ITT Aerospace Controls
Jabil Technology Services
JCB India Ltd.
J.C. Penney Co.
Jeppesen
JetBlue Airways
J.L. Herren and Associates P.C.
JTEKT Automotive Texas
Judd Wire Inc.
Kaizen Institute India Pvt. Ltd.
Kao USA Inc.
Kellogg Canada Inc.
London Plant
Keystone Steel & Wire Company
Kiekert de Mexico S.A. de C.V.
Kilgore Flares Company, LLC
Knowledgewoods Consulting
Pvt. Ltd.
KnowWare International Inc.
Korea Hydro & Nuclear
Power Co.
Korean Standards Association
Labinal Salisbury Inc.
Labs Inc.
Lakeland Regional
Medical Center
LAM Research Corporation
Land OLakes
Landoll Corporation
Lastar Inc.
Lean Six Sigma Institute S.C.
Learjet Inc.
Legacy Pharmaceutical
Packaging
Lemcon Networks Ltd.
Level 10 NZ Post House
LFI, Inc.
Lifescan Scotland Ltd.
Lifespan Learning Institute

( ) Indicates number of Site members in this organization.

May 2013 QP 51

ASQ Site Members

Lily Hospitals
Linamar CorporationQuality
and Launch Group
Liphatech Inc.
Logistics Co.
Lohmann Animal Health
Loma Linda University
Medical Center
Lule University of Technology
Mabamex SA De CV
Mahamaya Technical University
MAKO Surgical Corp.
Market Probe Inc.
Martin-Baker America Inc.
Maruti Center For Excellence
Mass Precision Inc.
Master Lock
Mather & Platt Pumps Ltd.
Mayo Clinic
Mayo Clinic Arizona
Medical Mutual of Ohio
Medical University of
South Carolina
MedImmune Inc.
MedImmune Vaccines Inc.
Medtronic Cardiovascular
Medtronic Inc.
Mental Health Center of Denver
Mental Health Partners
Merck
Merck Consumer Care
Metagenics
Meta Payment Systems
Microfabrica, Inc.
Micron Technology
Micron Technology Italy S.R.L.
Microsurgical Technology
Mid-South Power Distributors
Midway USA
MillerCoors LLC
Mine Safety Appliances Co.
Minitab Inc.
Minntech Corporation
Mitsubishi Polyester Film Inc.
Moog Inc.
Moog Inc. Components Group
Moog Medical Device Group
Moore Norman
Technology Center
Morgan Thermal Ceramics Inc.
Moses Lake Industries
MTP Drivetrain Services
Mylan Specialty L.P.
Nalco Co.
Nammo Talley Inc.
NASA Glenn Research Center
National Graduate School
National Institution of
Administrative Research
National Marrow Donor Program
National Quality Review
National Seafood
Inspection Lab

National Security Technologies

Nationwide Childrens Hospital
Naval Sea Logistics
Center Portsmouth
Naval Surface Warfare Center
Nelson Laboratories Inc.
New Balance Athletic
Shoes Inc.
New Zealand Post
NIT
Nokia Siemens Networks
Noramco
Norfolk Naval Shipyard
Northwestern Mutual Life
Norwich Pharmaceutical Inc.
Norwood Medical
Novartis Consumer Health Inc.
Novo Nordisk Pharmaceutical
Industries Inc.
Novozymes
NSF International
Nu Skin Enterprises
NuSil Silicone Technology
NuSil Technology LLC
Nypro Healthcare Baja
ODL Inc.
Office of the Comptroller
(Puerto Rico)
Ohio Army National Guard
Olympus Gyrus Medical Inc.
Omega Diagnostics LLC
OMNEX
Orthofix
Oshkosh CorporationDefense
Oso BioPharmaceuticals
Paccar Engine Company
Pacific Gas & Electric Company
Pacific Precision Inc.
Pacific Southwest Container
PakTech
Palmetto GBA
Panasonic Avionics Corporation
Panduit de Costa Rica Ltda.
Parker Hannifin Corp.
Par Pharmaceutical
Paul C. Parks Engineering Inc.
Paychex Inc.
Pearl Harbor Naval Shipyard
Pearson
Pella Corporation
Pera Global
Pernod Ricard USA
Perrigo
Perrigo Minnesota
Petroleum Helicopters
PGT Industries
Pharmaceutics International
Inc.
Pharma Tech Industries
Phoenix Health Plan/Abrazo
Advantage Health Plan
Pilot Chemical Company
Placon

PL Developments
Plow & Hearth LLC
PMT Corporation
Point Lepreau GS
Pontificia Universidad Catlica
del Per
Pratt & Whitney
Premier Bankcard
Procter & Gamble Company
Productivity Quality Systems
PSI Repair Services
Puget Sound Energy
QAI India Ltd.
Qatargas Operating
Company Ltd.
Qatar Quality Plus
Qiagen Shared Services Inc.
QMI-SAI Global (2)
Qualiware Inc.
QualTex
Rauland-Borg Corp.
RDECOMRock Island Arsenal
Refinera ISLA
The Reliable Automatic
Sprinkler Co. Inc.
Rhein-Minapharm B.G.
Ricca Chemical Company
Rio Tinto Minerals
RIT/CQAS
RJ Lee Group
Robert Heely Construction
Roche Diagnostics Corporation
Rohmann Services
R S Software India Ltd.
R. Stahl Inc.
RTI Biologics Inc.
RTI Tradco
SAFC
Salimetrics LLC
SanDisk Corporation
Sani-Tech West
Sanofi Pasteur Limited
Saturn Electronics &
Engineering
Sauder Woodworking
Saudi Airlines
Schleifring Medical Systems
SC Johnson
SC Johnson Home Storage
Sears Holdings
SED Systems
Shaw Industries
Shenzhen Tinno Mobile
Technology Corp.
The Shepherd Color Company
Sid Richardson Carbon Co.
Sigma-Aldrich Biosciences
Simon Fraser University
Singapore General Hospital
Singapore Health Services Pte.
Ltd.
Singapore Quality Institute
Smart Technologies Inc.

( ) Indicates number of Site members in this organization.

52 QP www.qualityprogress.com

Sorin Group Canada Inc.

Southern California Edison
Southern Management Corp.
Southwest Ontario Regional
Hospital Program
Span Packaging Services LLC
Spansion Inc.
Sparta Systems Inc.
Sparton Medical Systems
Colorado LLC
Spectralytics Inc.
Spectrum Surgical
Spellman High Voltage
SRA International Inc.
Starkey Labs Inc.
St. Louis Childrens Hospital
Strategic Solutions Inc.
Stratosphere Quality LLC
Stryker Communications
Stryker Endoscopy
Stryker Instruments
Suomen Laatuyhdistys
Supply Chain Services
International LLC
Supreme Council of Health
Syracuse Research Corporation
T & S Brass and Bronze
Talon Innovations
Techmetals Inc.
Technip USA Inc.
Tenneco
Terumo Cardiovascular
System Corp.
Texas Heath Resource
Texas Tile Manufacturing LLC
The Business School Guyana
Thunder Bay District
Health Unit
ThyssenKrupp Elevator
Manufacturing Inc.
ThyssenKrupp Waupaca Inc.
TIC Gums
The Timken Company
TIP Technologies Inc.
Toronto Public Health
Toyota Motor Manufacturing
North America Inc.
Trivascular
TriWest Healthcare Alliance
Tubos de Acero de Mexico S.A.
UAE Exchange & Financial
Services Ltd.
United Space Alliance
United States Pharmacopeia
Convention
Universidad Continental
Universidad de Guanajuato
Universidad Politecnica
De Guanajuato
University of Alabama
University of Central Oklahoma
University of Chemical
Technology & Metallurgy

University of Management
& Technology
University of Northern Colorado
University of Wisconsin
Hospitals and Clinics
University Rovira Virgili
URS
USANA Health Sciences Inc.
U.S. Army ARDEC
U.S. Army CERDEC
U.S. Army Med Res Inst
Chemical Defense
(USAMRICD)
U.S. Cellular Corp.
U.S. Environmental
Protection Agency
U.S. Food and Drug
Administration
USIMINAS
USIMINAS CUBATAO
USMC Blount Island Command
USPS Washington D.C.
UT MD Anderson Cancer Center
Valeant Pharmaceuticals
International Inc.
The Vanguard Group
Vascular Solutions Inc.
Ventana Medical Systems
Verify Inc.
Viastore
Viega LLC
Viracon
Visit Milwaukee
Vistakon
Volvo Powertrain
W.W. Grainger
Wackenhut Services Inc.
Walt Disney World
Warner Chilcott Company LLC
The Washington Consulting
Group Inc.
Water Corporation
Watson Drill Rigs
Waupaca Foundry Inc.
Webco Manufacturing Inc.
Wellmark
Wells Fargo Home Mortgage
Wenatchee Valley
Medical Center
WePackItAll
Wilden Pump & Engineering
WMATA
Xandex Inc.
XLI Corporation
Zippo Manufacturing Co.

SITE MEMBERSHIP APPLICATION

Office Use Only

MBKEA73
Promo Code_____________________

All employees at a single site are entitled to Site membership benefits. If your
organization has more than one site, each site must have a Site membership to share
membership benefits with its employees. Identify one primary contact who will receive
all ASQ-related information and can disseminate this information to employees.

Order Number______________________
Member Number____________________

Primary Contact Information

Mr.

Ms.

Mrs.

Dr.

Male

First Name

Female
Middle Initial

Company

Last Name
Job Title

Business Address (If address is a P.O. box, please provide a street address for deliveries)

Ste.

City, State/Province

Country

Zip+4/Postal Code

Area Code/Business Telephone/Ext.

Area Code/Fax

Preferred Email Address

If you were referred to ASQ by another member, please tell us who referred you.
Member Name

ASQ Member Number

Mailing Lists
Occasionally ASQ shares its mailing list with carefully selected quality-related organizations to provide you with information on products and services.
Please check this box if you do not wish to receive these mailings. ASQ does not sell email addresses to third parties.

WHY DID YOU JOIN?

To help us understand whats important to you, please tell us the top three reasons why
you became an ASQ member.

Career Development
Certification Pricing
In-person Networking
Involvement in ASQs Cause
Involvement in SRO

Knowledge/Information
Leadership Opportunities
Online Networking/Communities
Product Discounts
Training

ASQ FORUMS AND DIVISIONS

Your companys primary contact will belong to one ASQ Forum or Division as part of your
Site membership. Additional Forums and Divisions may be added for $10.00 each.
Please check one box indicating your included Forum or Division. Add additional Forums
and Divisions at right.

Audit (19)
A
 utomotive (3)
A
 viation, Space, and Defense (2)
B
 iomedical (10)
C
 hemical and Process Industries (4)
C
 ustomer-Supplier (15)
D
 esign and Construction (20)
E
 ducation (21)
E
 lectronics and Communications (5)
E
 nergy and Environmental (11)
F ood, Drug, and Cosmetic (7)
G
 overnment (22)
H
 ealthcare (18)

H
 uman Development and Leadership (13)
Inspection (9)
Lean Enterprise (23)
M
 easurement Quality (17)
P roduct Safety and Liability Prevention (25)
Q
 uality Management (1)
R
 eliability (8)
S
 ervice Quality (16)
S
 ix Sigma (26)
S
 oftware (14)
S
 tatistics (12)
T eam and Workplace Excellence (27)

Payment Information
1,000.00
Site Member Annual Dues $___________________
ASQ Sections
Your companys primary contact will belong to a local ASQ Section determined by your
company address. If you wish to choose a specific Section, please visit asq.org/sections
for a listing of Sections. Additional Sections may be added for $20.00 each.

$___________________

Quality Press Book Collection

Establish an outstanding resource library for your organization and strengthen
and extend quality knowledge and application. Subscribers will receive a minimum
of 10 books selected by Quality Press editors.
$480.00 (does not include shipping and handling)

$___________________

Book Collection Shipping & Handling

(United States $20.00, Canada $30.00, International $100.00)

$___________________

Additional
Forums and Divisions

Total of all items

$___________________
$___________________

Check or money order (U.S. dollars drawn on a U.S. bank)

Make check payable to ASQ.
MasterCard

Visa

American Express(Check one)

Cardholders Name (please print)

Card Number

Exp. Date

Cardholders Signature
Cardholders Address

For more information about Forums and Divisions,

visit asq.org/forums-divisions
or call 800-248-1946.

Please submit your application with remittance to:

ASQ, P.O. Box 3066, Milwaukee, WI 53201-3066 USA or fax to 414-272-1734.
You may also join online at www.asq.org
or by calling ASQ Customer Care at
USA and Canada: 800-248-1946
Mexico: 001-800-514-1564
All other locations: +1-414-272-8575

3.4 Per Million

BY Joseph D. Conklin

Roundabout Estimation

An indirect way to find quantities you need for your investigation

THE IDEAL approach in Six Sigma

nies may exist, and there may not be the

industry trade association that occasion-

is to directly measure your inputs and

money or time to draw one up and visit

ally asks a random sample of them about

outputs. What can a quality practitioner do

most or all companies. Companies may

their cement use. Suppose further that the

when thats not possible or practical? If the

be unwilling to release internal data to

results are published at the state level. The

difficult-to-measure variable has a known

outside parties if they fear publishing it

companies are more willing to share their

or theoretically reasonable relationship to

might help local competitors figure out

data in this way because:

another quantity that is readily available,

their business.

1. They are confident in the trade associa-

Skipping the measurement may not be

one option is to use this relationship to indi-

an option. In the case of cement use, lets

rectly estimate the challenging variable.

tions ability to protect it.

2. State-level numbers are aggregated at

say this number factors into models of

a high level so competitors cant figure

tons of cement used in construction for

economic activity used to forecast future

out what any single company is doing

10 counties in a certain state. The direct

business trends in the state. Without it, the

locally.

approach requires drawing up a list of

forecast is incomplete or unavailable. How

construction companies and contractors

might an indirect approach work?

Suppose you want to estimate the total

In this situation, what you wantcounty level numbersis unavailable. The trade
association has state-level numbers that it

in the state and surveying them about their

cement use. This may not be viable for

Building a solution

collects for its own purposes. Its willing to

several reasons.

To illustrate, suppose the construction

share them to help you meet our goal. How

companies are willing to work with an

do you indirectly estimate the county level

No master list of construction compa-

County data, state totals and indirect estimates

of cement tonnage / Table 1
County
1

10

State
total

New permits

1,146

2,004

1,560

6,726

3,501

2,071

7,692

4,549

1,115

2,239

107,168

Percentage of
state total

1.07%

1.87%

1.45%

6.27%

3.27%

1.93%

7.18%

4.24%

1.04%

2.09%

100%

Sidewalk spending
140.90 125.64 146.16 123.72 105.13 188.04 176.16 136.148 176.73 101.38
(thousands $)
Percentage of
state total

3.17%

2.82%

3.28%

2.78%

2.36%

4.22%

3.96%

3.07%

3.96%

2.28%

numbers?
To keep things
simple, say there are
two uses that consume almost all of
the cement in a state:
building and maintaining sidewalks, and new
building construction.

4,450.98
100%

Note: State total includes all counties, not just the ten of interest.

With a few exceptions,

sidewalk work will
be managed by local
governments. They will
need to keep records

Trade association
Sidewalk tonnage

1,709,979

of how many miles are

Roofing tonnage

21,344,437

covered, or maybe the

local budget has a line

County

Estimated
cement
used

10

Sidewalk
tonnage

18,286 31,976 24,891 107,273 55,862 33,045 122,734 72,584 17,791 34,726

Roofing
tonnage

675,678 602,500 700,902 593,293 504,145 901,736 844,766 654,483 846,061 486,162

Note: County 1 has 1.07% of the new permits for the state. Take 1.07% of the state total for sidewalk tonnage. 1.07% of 1,709,979 is the
County 1 estimate for sidewalk tonnage. Percents are shown to two decimal places. More precision is used to derive estimated cement used.

54 QP www.qualityprogress.com

item for dollars spent.

New buildings
require permits.
These are likely on
file with the planning
or licenses office.
While gathering public

Constant relation between

variable and tonnage
regardless of level / figure 1

Constant relation between

variable and tonnage that
depends on level / figure 2
60

25

50
40

15
Tonnage

Tonnage

20

10

20

5
0

30

10

10

Spending or permits

5
6
7
8
Spending or permits

10

records involves considerable effort, at

ure 2, which shows tonnage changes at a

a county that local producers and users

least they have a higher chance of being

constant rate over some range of spending

believe are reasonable, considering cur-

accessible than they would with private

or permits. But different rates apply as you

company data.

move from low to medium to high levels of

3. Are there additional variables or special

rent conditions and recent history?

these variables. The true relationship may

adjustments that producers and users

explaining your needs to county govern-

be even more complicated, as shown in

in a particular county can offer to

ments, say you obtain the information

Figure 3 (p. 56): Spending or permits may

improve the quality of that countys

displayed in Table 1, which provides esti-

have a curved relationship to tonnage.

estimate?

After spending considerable energy

mates of cement use from the more-easily

The only sure way to know is to have

4. Is there a county whose market is so

obtained data using a three-step process:

the actual county level cement tonnage

large that companies in that county

1. Find the total permits and total side-

numbers, but then you wouldnt need to be

can be confident the local competitors

walk spending for all counties in the

going through the exercise. If indirect es-

cannot figure out their business if they

state.

timation appears to be the best choice for

report their actual use to the trade

getting at hard or otherwise impossible-

association? Can the trade association

to-obtain data, the best way to be sure it is

survey that county alone to produce a

really a good option is to create a checklist

figure for comparison to the indirect

2. Compute the percentage shares of the

state totals for the 10 counties.
3. Apply the 10 county shares to the cement data from the trade association.

of tests in advance.

estimate?
5. Is it possible to take some fraction of

What cautions accompany this procedure? First, you need to appreciate the

Concerns about confirmation

the sidewalk or building projects for

important underlying assumption: Cement

In general, the longer the checklist and the

the county, work with the cement users

tonnage has a constant relationship

more tests on it that are confirmed, the

to determine how many tons they used,

with sidewalk spending or total build-

more secure you can feel using indirect

and compare this figure for consistency

ing permits. Figure 1 shows this type of

estimation. The items on the checklist will

against what a corresponding fraction

relationship. In pure form, the relationship

depend on the variable you are trying to

of the countys indirect estimate would

says any change in spending or permits is

estimate. With respect to the example, here

associated with some constant change for

are some possible tests for a checklist:

any level of tonnage.

1. The relationship that the indirect es-

suggest?
6. This example starts at state-level
numbers and estimates down to coun-

timation assumes: Do people with expe-

ties. Can the same indirect estimation

tonnage should move in the same direction

rience in producing and using cement

procedure start with a national number

as either spending or permits. The true re-

think its reasonable?

and estimate down to states, assuming

This is a stricter assumption than saying

lationship may be better illustrated in Fig-

2. Does the estimation produce values for

national and all state-tonnage numbers

May 2013 QP 55

3.4 per million

are readily available? Are state-level

data to produce an independent

numbers from the indirect estimation

estimate of the countys total ce-

consistent with any actual, readily avail-

ment tonnage.
If the estimates from this

7. Is there more than one variable that can

independent survey track well

be used for indirect estimates? Do most

with the indirect estimates, as

or all of them produce county level

in Figure 4, you have evidence

estimates that approximately agree?

the indirect estimates are a

The larger truth underlying a checklist

viable option. The opposite

250
200
Tonnage

able state-level numbers?

such as this one is that indirect estimation

Curved relation
between variable
and tonnage / figure 3

situation is shown in Figure 5.

150
100

In Figure 4, an independent

is a form of modeling the data. The ultimate

test of a model is how well it reflects the re-

check based on a sample of

ality. Consider Figures 4 and 5 based on the

projects in each county leads

test in option five earlier for how we might

to results that track well with

assess indirect estimation in practice.

the results of the indirect

50
0

10

Spending or permits

Figures 4 and 5 show two ways option

estimation. In this case, you can proceed

can determine whether the procedure has

five on the checklist might work out. Nor-

to any other checklist items you have not

any unforeseen negative consequences for

mally, in the example, the local companies

yet completed.

the quality of its work.

Indirect estimation is an instance of a

Figure 5 is a case of results that dont

are not willing to report their cement

tonnages out of confidentiality concerns.

track well. In the Figure 5 case, theres

useful principle in Six Sigma and quality

Suppose in the first year of indirect esti-

reason to believe the indirect approach

management in general. When the best op-

mates, or every few years afterward, you

needs replacement or adjustment because

tion is not available, make the best use of

are fortunate to find some fraction of the

the pattern of points on the graph shows

the second-best option. Put another way, a

local businesses in select counties willing

large disagreements between the two data

good solution thats implemented is better

to report their tonnage.

sets.

than a perfect one thats not. QP

In addition to the steps on the checklist,

Maybe you can get special funding for

extra measures to keep this data protected

one more is needed to finish the job. You

that would not normally be available on a

should inform the customer in this story

regular basis. Whatever fraction of the lo-

the people turning out the state economic

cal business is reported under this special

forecastabout any indirect estimation

data collection, you extrapolate from that

procedure you are using. The customer

1,000
900
800
700
600
500
400
300
200
100
0
0

200

400
600
800
1,000
Indirect estimate (in thousands)

56 QP www.qualityprogress.com

1,200

Unacceptable comparison
with indirect estimate / figure 5
Check against sample of county projects (in thousands)

Check against sample of county projects (in thousands)

Acceptable comparison with

indirect estimates / figure 4

JOSEPH D. CONKLIN is a mathematical statistician in Washington, D.C. He

earned a masters degree in statistics
from Virginia Tech in Blacksburg, VA and
is a senior member of ASQ. Conklin is
an ASQ-certified quality manager, quality engineer, quality auditor, reliability
engineer and Six Sigma Black Belt.

2,500

2,00

1,500

1,000

500

0
0

200

400
600
800
1,000
Indirect estimate (in thousands)

1,200

Career Corner

BY Rosemarie Christopher

Boost Your Brand

Soft skills are vital in todays workplace
In an ERA when many workplaces are

work. You can prepare for certifications

volunteers, you exercise skills such as con-

in flux, it may seem like there is little op-

and take coursework virtually or through

flict resolution, teamwork, collaboration

portunity to build your personal brand and

instructor-led courses.

and negotiation. Furthermore, this experi-

influence organizational culture. I would

While hard skills are certainly impor-

ence offers you a non-threatening learning

argue theres no better time to do so than

tant, professionals often overlook the

environment (no one can fire you; youre a

when there is momentum for change

development of soft skills as a continu-

volunteer).

already building around you.

ing education opportunity. Soft skills are

You dont have to go far to find devel-

increasingly important as roles become

opment opportunities. Even mentoring

is composed of your values, abilities,

more multidisciplinary and job descrip-

others or helping an overloaded col-

strengths and limitations. These denomi-

tions blur. Employers seek a greater

league gives you extra experience that

nators influence how you put your skills

amount of direct collaboration as they

may prepare you for your next career

and experience to work. The most suc-

struggle to do more with less of every-

movewhether its at your organization

cessful employees, knowingly or not, align

thing, including human resources. In tak-

or elsewhere.

their personal brands with their organiza-

ing on extra projects or responsibilities,

tions cultures.

you may find yourself needing soft skills

change, its important to periodically

that have been dormant for years or were

evaluate our work preferences and goals,

never fully developed.

assess how we like to interact with others

Your personal brand is your style. It

Change causes a degree of disruption

and chaos in the workplace. When an

As both ourselves and the world

and determine where we are on our per-

organization is in flux, a specific brand is

sought after. Employees that brand them-

Opportunities are everywhere

sonal continuous improvement journeys.

selves as change agents, strategists or

Soft skills, developed in good measure,

Periodically evaluating soft skills using

influencers are highly valued. In addition

complement technical mastery. Just as

online assessments is branding at its best.

to being capable of adjusting to change,

there are ways to develop hard skills,

Formally assessing the power of your

the most successful workers also will

there are also ways to strengthen soft

brand confirms to bosses, department

demonstrate a willingness to help manage

skills. The best approach to develop soft

heads and colleagues that among the

or carry out change.

skills depends on individual career goals.

ranks of keepers is a proactive and col-

In my experience, many workers

Verbal communication skills can be

laborative strategist.
Employers can only work with what

give the impression that they do not like

strengthened by joining a public speaking

change. An unfortunate truth is that those

and leadership skills-building club, such

employees give them. Organizations real-

who get stuck in ruts will lose out. Organi-

as Toastmasters. Another way would be

ize that there is a huge talent shortage

zations dont want to push boulders. Some

to step up as a leader of an interest group

that is not going away overnight. They

personalities and generations are better at

relevant to your organization or industry.

are working diligently and strategically to

going with the flow than others. If youre

When I decided I wanted to improve my

retain top employees and recruit the best.

not wired to embrace change, there are

public speaking ability, I became visible in

Now is the time to take control of your

measures you can take to help you adapt.

organizations that support my industries:

brand and your career. QP

ASQ, the Regulatory Affairs Professional

Soften up

Society based in Rockville, MD, and the

Professionals often enhance their brand

Board of Councilors of the University of

by sharpening their hard skills first. One

Southern California School of Pharmacy

way to update hard skillstechnical

in Los Angeles.

and scientific masteryis to earn new

Participating in an industry-focused

certifications (ASQ alone offers 17) and

group or association is also a way to gain

complete continuing education course-

management skills. By leading groups of

Rosemarie Christopher is president and CEO of MEI RxRS, a search

firm for scientific and technical professionals in pharmaceutical, medical
device, biologics, diagnostics and
biotech companies in Glendale, CA.
She has a masters degree in communication management from the
University of Southern California in Los Angeles. Christopher
is an ASQ member and the chair of the ASQ Food, Drug and
Cosmetic Division.

May 2013 QP 57

QPToolbox
Conductivity sensor

compact

Sensorexs CS615 conductivity sensor

XF86 series of indus-

monitors process fluids for changes within

trial open-face alter-

critical parameters. The sterilizable sensors

nating current (AC) ta-

are ideal for food, pharmaceutical and

chometer generators.

other contamination-sensitive services

These tachometers are

where sanitary connections are desired.

designed primarily for

The 316 stainless steel construction

758-GF86/

use on shaft ends to

withstands both cleaning in place and

measure speeds of up

steam sterilization processes up to 130C.

to 100,000 RPMs and

Two sanitary tri-clamp flange sizes are

extremely low torque

available. For compatibility with a number

burdens of less than

of instrumentation models, both sizes

one ounce-inch.

come with optional automatic temperature

compensation.
Cell constants offered with the CS316

This series of AC
tachometer generators are speed transducers in basic form,

efficient performance, while the digital-to-

are 0.01, 0.1 and 1.0, which allow the sen-

consisting of a stator and a permanent

analog convertor function reduces over-

sors a measurement range in most applica-

magnet rotor mounted onto a rotating shaft

shoot problems associated with a conven-

tions from pure water to general industrial

within a customers own specified equip-

tional PID controller.

use. The sensors come with a 10-ft. cable

ment. The compact size of the 758-GF86/

with tinned wire terminations for connec-

XF86 series allows them to be installed

features data logging and process data ar-

tion to process monitoring instrumentation.

in inaccessible areas such as gear boxes,

chiving, chart recording, virtual instrument

Call: 714-895-4344.

diesel engines and conveyor systems.

display and on-screen alarm display.

Visit: www.sensorex.com.

The units are also impervious to oil,

grease and relatively high temperatures.

Tachnometer generators

These meters are modified to reduce

The ATC DigiTec Division has announced the

rapid fluctuation, displaying their output in

The included CALGrafix software

Call: 800-866-6659.
Visit: www.west-cs.com.

display digits that result from varying speed

drive rates.
Call: 304-387-1200.
Visit: www.marshbellofram.com.

Temperature controllers
West Control Solutions provides a range of
temperature controllers that are designed

Color vision system

for regulating temperature in a variety of

A Cognex has released the In-Sight

applications, including plastics, packaging

7010C, a color vision system that can

and laboratory equipment.

distinguish parts by color. The system

The CAL controllers, which include the

58 QP www.qualityprogress.com

features 24-bit color resolution that

3300, 9300 and 9400 controllers, offer a

identifies 16 million color variations. In-

menu for programming and full proportion-

dustries using color identification include

al-integral-derivative (PID) operation for

automotive, food and beverage, electron-

ic hardware and pharmaceutical.

Along with the In-Sight 7010C, Cognex is
introducing three additional color models,
the In-Sight 7200C, 7400C and 7402C.
These systems solve more complex applications involving logic or color composition, as well as those requiring higher
resolution or faster execution.
The In-Sight 7000 vision systems also
feature a compact housing, factory communications capabilities, autofocus technology and integrated lighting options.
Call: 508-650-3000.
Visit: www.cognex.com.

Photoelectric proximity sensor

Sick USA has announced the W27 MultiPac
photoelectric proximity sensor. The W27
MultiPac uses two redundant receiver

and beverage industries.

The W27 MultiPac provides overhead

bluetooth-enabled smartphones, tablets

and computers. The iBlue can replace tools

arrays to detect difficult targets such as

counting and indexing to ensure bundles

such as hardness testers, micrometers and

bundled bottles in the packaging and food

are created and transported properly. It

temperature readers.

offers two independent receiver arrays for

When the iBlue is paired with a Blue-

continuous detection when diffused light

tooth-enabled device, it gathers, records

is misdirected from bundled surfaces. A

and sends data through its three ports: a

single, high-intensity, visible red-emitting

K-type thermocouple port, a three-pin met-

LED aids in alignment and provides detec-

al hardness probe port and a USB human

tion despite dirt and dust buildup.

interface device-enabled port that connects

The W27 MultiPac is able to detect shiny,

with a wide range of non-proprietary tools

glossy or dark targets within its foreground

including keyboards, micrometers, calipers

without signal interruptions. A higher angle

and barcode scanners.

of incidence provides increased mounting

No special software is required and

flexibility, enabling the detection of film-

data from the iBlue can be sent as a text

wrapped pallets and other targets.

email or placed into MS Excel and Notepad.

Call: 800-325-7425.

iBlue is compatible with the most common

Visit: www.sickusa.com.

operating systems including Apples iOS,

Android, Blackberry, Windows and Linux.

Industrial Bluetooth
transmitter

Call: 574-936-2112.
Visit: www.itamco.com/iblue.

Indiana Technology and Manufacturing Companies have released the iBlue,

a handheld Bluetooth transmitter that
gathers production data and sends it to

Got a quality product?

Send your product description and
photo to [email protected].

May 2013 QP 59

QPReviews
Lean Management Principles
For Information Technology
Gerhard J. Plenart, CRC Press, 2012, 368

or are we creating more problems?

A measurement system is not for management, it is for motivating employees.
People respond to what is inspected,

pp., $79.95 (book).

Find the root cause.

Standardize to prevent recurrence.
Suggestion systems and quality circles
are important parts of the house of gemba.

Although this book

not to what is expected.

This is a way to prove that employees are

is intended for IT

Relevant diagrams, illustrations, a

actively involved in kaizen and that man-

practitioners, it is an

serviceable bibliography and index make

agement has been successful in building

excellent resource

this book easy-to-read. The message and

the kaizen infrastructure.

for anyone looking to

materials are simple to assimilate. If you

implement lean man-

are looking to implement or upgrade your

studies from a wide range of organiza-

agement principles.

lean initiative, reading this book is well

tions demonstrating how gemba kai-

The author does

worth your time.

zen has been successfully applied. For

an admirable job of

Marc A. Feldman

providing information

Solvay Chemicals Inc.

on production processes, technology and

Houston

change management, all with the aim of

Included in the book are global case

example, how Caetano Bus in Portugal

succeeded in delivering on schedule; how
customer expectations were exceeded
at Disney World; how Romes airport was
transformed; how participation made a

larly during the lifetime of an IT project

Gemba Kaizen: A Commonsense

Approach to a Continuous
Improvement Strategy

software development, implementation,

Maasaki Imai, McGraw-Hill Professional,

the energy distribution company Enexis

hardware upgrades, user training, quality

2012, 448 pp., $40 (book, second edition).

in the Netherlands; and how quality was

control and pilotingit makes them prime

Gemba means actual place in Japanese.

improved at Inoue Hospital in Japan.

eliminating waste.
Due to all that occurs and repeats regu-

targets for lean techniques.

Gemba is where

The first portion of the book discusses

difference for Xuji Group in China; how

the delivery process was improved at

This is not a book of theory but a book

real action occurs.

of action. Every manager of any type of

the need for IT to become lean. The

In Japanese, kaizen

organization should read this book.

second part covers a structured method

means continuous

for analyzing and dissecting problems and

improvement. Kaizen

Lule University of Technology

processes. The final section provides an

implies improvements

Sweden

overview of continuous process improve-

that involve everyone,

ments.

both managers and

Bengt Klefsj

Plenart emphasizes that interpretation

relatively little expense. In this second

differ tremendously between practitioners

edition, Imai explains how to reach cost-

Performance-Based
Certification: How to
Design a Valid, Defensible,
Cost-Effective Program

of IT and their customers, internal and

effective improvements by kaizen in a way

Judith Hale, Pfeiffer, 2012, 288 pp., $80

external. Differences occur even within en-

that brings dramatic results through the

(book, second edition).

terprise areas and often are due to varying

power of common sense.

This book shows how to initiate, plan,

In trying to find where lean can benefit,

expectations. Example systems for over-

workers, and entail

Gemba management has five golden

implement and improve a sustainable

coming these disparities are suggested.

rules:

certification program that meets orga-

Simple concepts are offered throughout

Go to the gemba first.

nizational and stakeholders needs and

the book such as:

Check relevant objects.

expectations. The author notes that the

What does this process try to achieve?

Take temporary countermeasures of the

certification program deals with decid-

Are we working on the correct problem

60 QP www.qualityprogress.com

spot.

ing which functions will be served and

whether or not the program will deter-

the supply chain and logistics. The author

ment based on this book. The TOC resourc-

mine, screen for and monitor proficiency.

contends that with the addition of TOC

es presented in this book help people who

Also she notes whether the program

to the design and management of supply

work with supply chains understand other

differentiates between levels of capability

chain activities, the user will be able to

aspects of manufacturing where the TOC

or if it even recognizes capability.

make the most of resources and reduce

concepts are applicable.

The book

non-value added activities. It merges two

Roberto Guzman

is organized

subjects critical for every business to en-

Morrisville, NC

based on the

sure market coverage and efficiency.

plan-do-check-

Srinivasan conveys the message with

act continuous

a smooth transition among topics. This is

improvement

a very useful book; however, the author

cycle. The book

stated it was initially intended as a text-

is divided into

book and still could be. But for it to work

Enterprise Performance
Management Done Right

as a textbook, it needs practice exercises

Ron Dimon, John Wiley & Sons, 2013, 208 pp.,

10 chapters, each ending with a useful list

of errors the author describes as easy-to-

for students to validate

make or frequently made errors. Hale also

what they learn from

provides guidelines to ensure successful

the book.

performance of the steps. In addition,

The individuals who

Recent Releases

$50 (book).

Management: A Concise
Introduction

the tools in the form of checklists and

will benefit most from

Richard Pettinger, Palgrave Macmillan, 2012,

guidelines listed in each chapter can be

reading this book will

464 pp., $45 (book).

downloaded free of charge and adapted to

be those in managerial

meet an organizations unique certification

positions responsible

needs.

for shipping, logistics

experience in the fields of evaluation and

vendor perspective. Supply chain pro-

The Lean Turnaround: How

Business Leaders Use Lean
Principles to Create Value and
Transform Their Company

certification, has created a masterpiece

fessionals should experience improved

Art Byrne, ASQ Quality Press, 2013, 272 pp.,

that provides a set of effective, yet simple

efficiency in resource and people manage-

$35 member, $35 list (book).

The author, through her years of

and receiving activities from a client or

steps, for organizations that plan to launch

a new certification program, are searching for solutions to their ailing certification
program or are looking for fresh ideas to
improve them.
Herzl Marouni
ABS Consulting
Houston

Building Lean Supply Chains

With the Theory of Constraints
Mandyam M. Srinivasan, McGraw-Hill Professional, 2011, 384 pp., $42.78 (book).
This book is based on how theory of

Advertisers Index
Advertiser
EtQ Inc.
Minitab Inc.
PQ Systems Inc.
Quality Council of Indiana
StatSoft Inc.

Page Phone
1
516-293-0949
IFC 800-448-3555
33
800-777-3020
10, 11 800-660-4215
OBC 918-749-1119

Web
www.etq.com
www.minitab.com
www.pqsystems.com
www.qualitycouncil.com
www.statsoft.com

constraints (TOC) can be used to benefit

May 2013 QP 61

For information on placing an ad,

contact Media Sales at 866-277-5666.

ProfessionalServices

Lean Six Sigma Training

and certification online by
Thomas Pyzdek

Save 10%! Enter coupon code

ASQ10 at checkout

www.sixsigmatraining.org /store
+1 520-204-1957

Im Baaaaack!
Facilitating, Training, Coaching!
Lean Principles and Culture
Continuous Improvement
Integrating Lean & Quality
QMS, ISO 9001, TWI, Kaizen, 5S
The Power of Root Cause Analysis!

aging gracefully

Mike Micklewright

CSSBB, CQMgr, CQA, CQE

Arlington Heights, IL
PH: 847-401-0822
[email protected]; www.mikemick.com

Quality Institute of America, Inc.

Quality Systems
Registrars, Inc.
Providing Registration Services to:
AS 9100, ISO 9000, ISO 14000, ISO 18000
and RCMS/RC 14000
QSR will be moving and would like to
announce the new office address:
22375 Broderick Drive, Suite 160
Sterling, VA 20166
Phone: 703-478-0241 Fax: 703-478-0645
www.qsr.com

TQM Associates Inc.

were here to support you
Established in 1994
Women-Owned
Quality Assurance Professionals
Across the U.S. and Worldwide
Temporary or Permanent
Source Inspection
Surveys
Audits
Expediting
800-424-4729
3990 Old Town Ave. #C109
Fax 619-297-3251 San Diego, CA 92110
tqmassociates.com email: [email protected]
62 QP www.qualityprogress.com

IMDS Data

We can create your data and submit within

72 hours
We do the work and invoice you
References found on our website
Based in the United States

www.imdsdata.org 734-205-8874

Since 1994
Complete Quality, Environmental, Safety,
Six Sigma, Consulting, Auditing, and
Training Services. Comprehensive Quality
Management Software (QISS).
QISS-based ISO-Easy Program
Quality Management Software (QISS)
Automating Document and Records Control,
Communications, Nonconformance,
Corrective-Preventive Actions, Calibration,
Maintenance, Training, Audits, and
Management Reviews.
PH: 281-335-7979. Houston, TX
Email: [email protected],
www.qi-a.com www.qisssoftware.com

Quality Systems Enhancement, Inc.

Auditing/Consulting/Training

Standards
ISO Standards: 9001, 14001,
50001, 13485/21CFR 820,
15189, 17025, 27001, 31000, AS
9100/9110/9120, OHSAS 18001,
TL 9000, TS 16949, etc.
Food Safety Standards: BRC,
SQF, FSSC 22000, ISO22000,
FDA Compliance
Chain of Custody Standards:
FSC, SFI, PEFC
Recycling Standards: e-Stewards
Certification, R2 Certification
Gap Analysis to All Standards

Excellence Tools
Design of Experiments
Design for Six Sigma
Lean Enterprise
Lean Manufacturing
Lean Six Sigma
Sustainability
Bottom Line Improvement
(Guaranteed)

Other Tools/Services
Statistical Problem Solving
Project Management
Internal Auditing Services
Risk Management
Industries
Aerospace, Automotive,
Casting, Energy, Healthcare,
Environmental, Forest Products,
Manufacturing, Packaging,
Medical devices, Materials,
Services, Telecommunications,
Textile, etc.

Quality Systems Enhancement Inc.

1790 Woodstock Rd. Roswell, GA 30075
www.enhancequality.com [email protected] 770-518-9967

Classroom Training Aids

g Quincunx Boards
g Sampling Bowls
g Catapults
g Deming Funnels
g And lots more

Visit us at: www.qualitytng.com

Email [email protected] for brochure

Ph: 248-641-7030 Fax: 248-641-7031

PO Box 611 Troy, MI 48099-0611

ProfessionalServices
For Accredited Certification
Look for the Symbols of Quality

EAGLE Registrations Inc.

EAGLE Food Registrations Inc.

Highest Ranked Registrar

in an independent customer survey!
ISO 9001 AS 9100 ISO/TS 16949
ISO 14001 ISO 13485 OHSAS 18001
Safe Quality Food (SQF) ISO 22000
FSSC 22000 SQF Ethical Sourcing
Call 800-795-3641 | www.eagleregistrations.com

The source for

flash card study aids
for certification exams:
CQE, CSSBB, STATS, and more.
www.qualityreviewinaflash.com

For information on placing an ad,

contact Media Sales at 866-277-5666.

Consultants in Quality Inc.

9
9
9
9
9

ISO 9001, AS 9100, ISO 13485, ISO 20000

FDA QSR, Canadian MDR, European MDD
Planning, Implementation, Training
Process Improvements, Process Validation
QMS Internal Audits, Mini-audits
Camille Delmotte, MBA, President
Phone and fax: 410-426-2269
[email protected]
www.QualityEdgeConsulting.com

Beijing Enertic Engineering Technical Co., Ltd.

A 3rd party inspection company
10 years experience for boiler, steel structure,
pipes, pumps, valves, etc. in China and Asia.
China Headquarters: Tel: +86-1350-023-1596
Email: [email protected]
US representative: Tel: 843-810-4805
Email: [email protected]
Website: www.enertic.com

Experienced consulting for accreditation in:

ISO/IEC 17065 Conformity assessment for
products, process and service
ISO/IEC 17025 Competency of test labs
Contact: Richard Stump [email protected]

Looking for Quality

Professionals?
Place a Recruitment Ad in
Quality Progress and reach
more than 100,000 readers
from all over the world!
Contact Media Sales
at 866-277-5666.

Experience ASQ TV on videos.asq.org

TM

May 2013 QP 63

One Good Idea

BY william A. levinson

Act the Fool

Heyokas play an important role in an organizations survival
A Heyoka is a sacred clown or contrar-

lenge existing practices without constraint

Shingo asked, If all you need to do is paint

ian in the Sioux and Lakota language.

by calling attention to underlying assump-

the pen caps, why paint the air as well?

Using satire and farce, they ask difficult

tions and paradigms. This concept appears

He observed at least half of the paint

questions, help others see situations

in a Diesel clothing company advertising

sprayed missed the caps. That company

differently and open eyes to things often

campaign, Be Stupid. The campaign

paid for wasted paint twice: first in the

overlooked.1 Almost every workplace has

encourages people to take risks, innovate

cost of its purchase and again when it

a few heyokas, and they are vital to the

and challenge established paradigms.2

became an environmental problem.

Words of wisdom

doughnuts hole, means to pay attention

more than an entertainer or fool. The

Shigeo Shingo often acted as a heyoka. At

to everything that is thrown away (the

jester also played an advisory role. He

a metal forming facility he asked, Why

hole) as well as the product (the dough-

was the one person who could criticize or

grease scrap metal? Instead of greasing

nut). Phrases like grease scrap metal and

admonish the king and speak the truth and

the entire piece of stock, he thought the

paint the air put processes and waste in

The phrase, keep your eye on the

organizations survival.
In medieval times, a court jester was

a new perspective. When Henry Ford said,

Pedestrianism is not a highly paid line [of
work],4 he was commenting on jobs that
required workers to walk to get tools and
parts due to poor workspace organization.
Ford thought walking was a waste of motion that was built into the job and taken
for granted.
An effective heyoka uses questions and
observations to challenge procedures, paradigms and organizational culturenot the
people who do the jobs. This is consistent
with auditing and other quality approaches
that place blame on deficiencies in tasks or
the work system, not the staff. QP
References

get away with it. The jesters words could

manufacturer should only grease what

be disregarded as jokes according to social

came into contact with the press. This

norms and customs.

would reduce the amount of lubricant the

The fool in tarot card decks may symbolize a similar rolethe ability to chal-

A Lesson from levinson

company needed to purchase.

At a fountain pen manufacturing plant,

William A. Levinson is the author of Easy A, which features tips to ace certification exams. Check out the open-access column, which appeared in QPs July 2012
issue, at http://asq.org/quality- progress/2012/07/one-good-idea/easy-a.html.

64 QP www.qualityprogress.com

1. Wikipedia, http://en.wikipedia.org/wiki/Heyoka.
2. Be Stupid, Diesel, www.diesel.com/be-stupid.
3. Shigeo Shingo, (Andrew Dillon, translator), The Sayings
of Shigeo Shingo: Key Strategies for Plant Improvement,
Productivity Press, 1987.
4. Henry Ford and Samuel Crowther, My Life and Work,
Doubleday, Page and Company, 1922.

William A. Levinson is principal

consultant at Levinson Productivity
Systems P.C. in Wilkes-Barre, PA. He
has a masters degree in engineering
from Cornell University in Ithaca,
NY, and an MBA from Union College
in Schenectady, NY. An ASQ fellow,
Levinson is an ASQ-certified quality
manager, auditor and engineer, reliability engineer and Six
Sigma Black Belt.

Whats Online in the

ASQ Knowledge Center?
CASE STUDY
Quality Strategy Improves Business
School Placements
Using competitive benchmarking and quality
tools, Ramaiah Institute of Management Studies
improved job placement results for its students,
while also adding a new source of revenue for
the organization.

20
2

NEW ISSUES OF
QUARTERLY JOURNALS

Quality Management
Journal
v o l u m e

2 0 ,

i s s u e

Perspectives of a Clinical Nurse Specialist About Improving the Quality of Nursing Services
Susan Seitz
Quality management Journal

A Framework for Leading the Transformation to Performance Excellence Part I:

CEO Perspectives on Forces, Facilitators, and Strategic Leadership Systems
John R. Latham

An Integrated Framework for Service Quality: SQBOK Perspective

Rajesh Kumar Tyagi, Nikhil Varma, and Navneet Vidyarthi

The Journal for

Front-line Employee versus Customer Perceptions of Quality Attributes

Quality and
Participation

Anne Julien and Christina Tsoni

People | Pride | Performance

January 2013 | www.asq.org/pub/jqp
Vol. 35, No. 4

2013

Leadership Issues
and Approaches
in the 21st Century
www.asq.org

WEBcast
Leadership Balance
Results and Relationships

Delivering Process Excellence Through

Process Management

Quality Culture
Kaizen

Performance Metrics
Psychological Effects

Business process management (BPM) can be

seen as the maturation of process excellence
the perfect blend of quality program, project, and
process. In this webcast provided by the Six Sigma
Forum, learn what BPM is, how it links to your
existing continuous improvement strategy, and
how to deploy it successfully.

You can find all the latest issues of ASQs

quarterly journals in the Knowledge Center. In
addition to browsing the full table of contents
for each issue, read sample articles available
open access. April saw new issues from Quality
Management Journal, Journal for Quality and
Participation, Journal of Quality Technology, and
Quality Engineering. Look for Six Sigma Forum
Magazine and Technometrics in May.

Access this months featured content and more Web exclusives in the
ASQ Knowledge Center at asq.org/knowledge-center/featured.html.

training

CERTIFICATION

CONFERENCEs

MEMBERSHIP

PUBLICATIONS

STATISTICA is the only

process monitoring solution that
leverages Big Data Predictive Analytics.
Supports basic control charting, dashboarding, and
predictive maintenance solutions for thousands of parameters.
Quality Control, Process Monitoring, Multivariate Trending, Annual Product Reviews,
Complaints Trending, Stability & Shelf Life Analysis, Validated Data Entry, and more.
Open architecture readily supports your existing data warehouses, IMS, ERP, and MES systems.
Dedicated solutions for validated deployment in medical device and pharmaceutical manufacturing.

When quality matters, STATISTICA rules.

www.StatSoft.com/v12
2300 East 14 Street Tulsa, OK 74104 USA +1 (918) 749-1119

Copyright StatSoft, Inc. 1984-2013. StatSoft, and STATISTICA are trademarks of StatSoft, Inc.

QP201304r02