Audio Recording

Home
About me
License music
Contact
Resources
Search

Popular Content
o How to Mix Instrument Frequencies for Best Sound
o Tips in Mixing Bass Guitar like a PRO
o Tips on how to mix vocals and put some effects like a professional
o Audio Compression Tips for Mixing
o Creating Realistic Stereo Image with Panning
o Tips in Mixing Electric Guitars using "Double Tracking" Technique
o Guitar EQ Mixing for rock, country and pop
o Complete EQ settings to Start when doing Audio Mixing
o Audio Mixing Tips and Secrets a Professional Audio Mixer won't tell
o How to Mix Piano Keyboard- Panning, EQ and Compression techniques
o Why you should not mix using headphones?
o Mixing Choir Vocals in Live Music:Soprano, Alto, Tenor, Bass, Baritone
o How to Mix Guitar Tracks in your Home studio: Beginners Guide
o How to pan acoustic or electric guitar in the mix?

Recent Post
o Multi-track Recording Tutorial in Reaper & Importing of Tracks
o Beginner FAQ on Digital Recording Studio Troubleshooting
o Reaper DAW Review -Digital Audio Workstation (2012 Edition)
o Best practices on Digital Audio Editing for Beginners
o Burning Music to Audio CD: 10 Dos and Donts
o Focusrite Saffire Pro 40 Mix Control Tutorial
o Beginner Hard drive or SSD Guide for Audio Recording and DAW
o What is analog summing mixer comparing it to digital?
o Balanced and Unbalanced Audio Guide in Home Recording
o Recording Producer and Artist Guide on Legal Agreements
o How to Set your Firewire Audio Interface as Default Sound Device in Linux
o Reaper Aux Send: Setting Reverb & Parallel Compression
o Focusrite Saffire Pro 40 in Ubuntu 11.10: Installation Guide
Get Involved
Music Production Help Q&A
Post Categories
o Audio Mastering Tutorial
o Music Mixing
o Music Publishing
o Reaper DAW Tutorials
o Recording and Mixing Drums
o Recording Equipment
o Recording Tips
o Ubuntu Music Production
Pages
o Home
o About me
o License music
o Terms&Disclaimer
o Services
o Contact
o Resources
o Sitemap
Archives
Subscribe
Enter your email address:

Delivered by FeedBurner
Share, Follow & Support Us
Love this post?Help us share.Thanks.


Tips on how to mix vocals and put some effects like a
professional
by: EMERSON MANINGO on September 28, 2008 in Music Mixing
Vocals are the most important instrument in any audio mixing work. In fact if the vocals are not
properly mixed, you can observed a difference between good and poor audio production work.
Mixing vocals is therefore a big priority in the audio mixing session. In this article, I will share
my personal techniques when it comes to mixing vocals. I will illustrate those essential
principles I have in mind to come up with greatly produced vocals.
Bear in mind that this is not a one-setting-fits-all approach and should only serve as a starting
point or guide in mixing vocals. It is because different vocals and genre takes different approach
in mixing.
Start with the tips illustrated in this tutorial, and then tweak further to get the best vocal sound
out of your mix.

First Principle: A greatly recorded vocals will make it very easy to professionally
produced recorded vocals.
Explanation: Garbage in> Garbage Out. If the recording is bad, it will definitely sound bad in
the mix no matter what effects or surgical procedure you do for the vocals. It is why mixing is
very different from recording when it comes to technical aspects of music production. When you
say high quality recording it says, It captures the best performance without any noise,
interference or clipping
How do to this? I do this by testing the vocal level first before recording. The objective is to
record the vocals at a maximum level without clipping or distortion- specifically around -40dB
to -6dB (maximum peak or the loudest part of the vocals) at your audio interface hardware level
meters NOT on your DAW level meters. Some audio interface do provide a recording level
meters in the form LED display. They even includes dB units on them for easy reference, use
them to get the best recording signal possible for your vocals.
This allows maximum signal to noise ratio and best dynamic range possible for your vocals.
Once you have set the levels, you can now proceed to recording. September 27, 2011 UPDATE:
You can find details on tracking vocals correctly on this post: How to record vocals properly in
your digital home recording studio
It is highly important that recording should be completely raw and without ANY EFFECTS
including reverb. Some engineers add reverb only feed to the vocalist headphones to ensure that
she feels it LIKE A PRODUCED SOUND, so that she can sing with confidence.
A real recorded vocal from a professional studio is DRY. Without any effects I mean. It is highly
important that if the recording is done digitally, it should be recorded above CD quality, this
means going above the normal 16 bit 44.1 KHz standard. Popular sound cards such as M-Audio
Audiophile 2496 PCI Digital Audio Card can get 24 bit 96KHz. But PCI soundcards are old
school technology for home recording; you should now be using either a USB or Firewire audio
interface and record at least 24-bits/48KHz for your vocals. You can refer to this post for the
cheapest 24-bit/96KHz USB audio interface if you are using Windows. Aim for the one that has
an input level meters on the hardware so that you can see whether the levels are clipped or not.
Second Principle: Clean up the audio first before using it in the mix
Now the recording is done, open it up using your favorite audio editor (I am using Reaper Digital
audio workstation). Then zoom it out and remove any background noise and unusual breathing
related noise. Noise normally occurs in the beginning and in the end. Breathing noise (should
sound minor) occurs during the pause of the stanzas, or in the way to the chorus of the song.

You can refer to my past tutorial on tips to remove noise in recordings, regarding this in detail.
After noise removal, since there are lost amplitude, you can normalize the wave to bring up the
signal to a maximum.
IMPORTANT WARNING: In this step; you are editing the vocals destructively, if your DAW
comes with non-destructive editing features such as volume envelopes then use it first. Only do
destructive editing if its beyond the capability of multi-track/DAW editing features. And do not
forget to backup your vocals when you perform destructive editing.
Personally I would discourage you from editing your vocal track destructively (using edit
view or any audio editing software). If you are using a DAW software like Reaper, you can
easily implement volume envelopes to silence the beginning or long pause in your vocal tracks,
such as shown in the screenshot below:

You can read this tutorial volume envelope/automation tutorial in Reaper for more details on this
technique.
Third Principle: EQ first before Compress
Believe it or not, a vocal does not need serious effects like other instruments. The simpler your
effects used, the better will be the produced vocals. It is highly important to EQ first using this
setting :
Cut 200 Hz (high pass filter)= -6dB
Boost 3000Hz Q = 1 = 3dB
Boost 15000Hz Q = 1 = 3dB
Take note that if you take the summation of cut and boost, it is literally equal to zero. So if you
cut 6dB and I boost 6dB, it does not changes the volume. The objective is to preserve the volume
by not doing drastic EQ changes.
However, concentrating your EQ work on vocals alone does not make your overall mix sound
good. You need to pay attention to other instruments in your mix in such a way they do not
compete with the vocal frequency range. You need to drill a hole in other instruments frequency
range occupied by the vocals. This would make the vocals to sit properly in the mix.
In this case, I would strongly recommend that you read this tutorial on complete EQ settings to
start when doing Audio Mixing. It contains all starting EQ tips for the most common musical
instruments used in the mix. By working on that, you can obtain a very clear vocal in your mix
while not compromising the sound quality of your other instruments.
For compression, I share some techniques on audio compression tips in mixing that includes
vocals. Personally I like the Sony Wave hammer plug-in in Adobe audio, presets to voice. It
produces some of my finest mixed vocals.
Also, I am using Waves C4 compressor and pop vocal preset. It simplifies all compression
settings you need to do for your vocals.
Fourth principle: Be very conservative with reverb
Frankly, the mix vocals I used has a very low amounts of reverb. This could be due to the fact
that I am mixing for rock, country and pop which audible reverb is not very popular unlike in
other genre.
But not only that, having low amounts of reverb makes the vocals stood up and sounds very
strong (in your face). You can easily captivate the listener with strong vocals with low amounts
of reverb. I use Sony ExpressFX Reverb, set to Plate reverbs. Plate reverbs is highly
recommended for vocals and only set it:
Room size: 30
Liveliness: 10~15
%Original (dry mixing) = 85%~90%
%Reverb = 15%~10%
Also I use reverb plug-ins from Waves and Focusrite, they do sound great and I would
recommend setting the wet percentage at 30% to 40% at a start. But this plug-ins are not free,
also if you buy some Focusrite audio interface, you can get a free Focusrite plug-in suite that
includes the reverb plug-in.
One great way of learning how to apply reverberation effects is to listen to an actual sample. You
can read the tutorial on adding reverb to vocals as it contains some important illustration and
audio samples about how vocals could change with different reverb settings.
Then once you apply some setting; listen very carefully to the mix and avoid over-doing the
implementation of reverb. Sometimes a small reverb is enough, in some applications moderate
reverb is also necessary. One of the golden rules of implementing reverb on vocal mixing are as
follows:
a.) Very slow ballads (slow tempo songs) moderate reverb.
b.) Fast tempo songs (punk rock, alternative music, country music, etc.) low reverb or even no
reverb. Feel free to experiment what sounds appropriate for the mix.
c.) Moderate tempo moderate amounts of reverb.
Do not be obsessed with reverb settings, use your ears to judge the setting. It is also important
that you consider the blending of vocals and its reverberation with the rest of the instruments in
the mix. You cannot implement the same reverb settings on all tracks otherwise it would sound
squashed and muddy.
In this case, you should learn how to apply reverb to a mix properly. And then you will learn that
different instruments need different reverb settings. It is being influenced by the following
factors:
a.) The track location in the stereo field
b.) Tempo of the song,
c.) Genre
d.) Natural frequency of the instruments.
Content last updated on February 4, 2012
Related posts:

Tips in Mixing Bass Guitar like a PRO
Bass Guitar is very hard to mix. It is always the main reaso...

Mixing Choir Vocals in Live Music:Soprano, Alto, Tenor, Bass, Baritone
I received an important question from a reader: I have b...

Lead Guitar Mixing Tips for Rock Instrumental Music
Lead guitar is a critical track in any rock instrumental mus...

How to Prepare and Send Recorded Tracks for Audio Mixing
Lets have this example. Have you ever thought; How am I go...


33 Responses to Tips on how to mix vocals and put some effects like a
professional
1. Keith Everette Smith Says:
April 16th, 2009 at 7:46 am
I enjoy the blogs! Im a little confused as to how you could recommend a one size fits
all approach to EQing a vocal? Of all the instruments, its the most complex. Different
EQ is needed depending on the vocalist. Im sure you know this and youre trying to give
people some pointers, but these settings are not universal. In fact, if you have a nazal
sounding vocalist, you may have to cut 3khz to smooth it out, not add 3db at 3k. hmm.
Just my thoughts. Keep em comin!
2. Emerson R. Maningo Says:
April 16th, 2009 at 4:17 pm
Hi Keith, thanks for following the blog post! Anyway I do agree with different EQ
needed depending on the vocalist.
However, this is looks like a case to case mixing scenario.
Intelligibility of human voice is very critical at 3KHz range which I prefer to have
boosted to get some presence in vocals for clarity of the lyrics..
Again a case to case mixing scenario and you provided me a good example such as nazal
sounding vocalist.
3. The Translator Says:
June 19th, 2009 at 3:03 am
Hey. How are you? Great blog man. I mean, I've been like searching for this since ever
lol. Awesome work man. Thanks for this, really. My band has just finished its first
recording, and I'm in charge of producing it, but, well, it's my first time. I'm using Adobe
Audition and Reaper, and a ton of Plug-Ins. If I have any doubts, can I send a comment
and ask you? Wouldn't you mind? I promise to send the songs when they're done Hugz
from Portugal.
4. Emerson R. Maningo Says:
July 13th, 2009 at 1:39 pm
Hi Translator,
No probs,once your recording is done, upload it to your music page, it could be any like
MySpace, come back to this blog and send me a message. I will check that out.
Thanks for reading my blog.
Cheers.
5. Daniel The Translator Says:
July 21st, 2009 at 6:19 am
Hi Emerson. Thanks for everything. You can listen to our two songs at:
http://www.palcoprincipal.com/dharma Its the two first songs on the playlist. Keep in
mind that the drums were recorded with four vocals mics. Tell me what you think. Best
regards.
6. Bill Says:
October 1st, 2009 at 7:42 pm
Could you please explain EQ..
What is a high pass filter and what frequency goes with it as well as lows,low mids, mids.
Im very confused.
Thanx
7. Emerson R. Maningo Says:
October 2nd, 2009 at 4:53 pm
Hi Bill,
A high pass filter is a filter that allows to pass all frequencies above a certain cutoff while
attenuates frequencies below it. If you have a high pass filter set at 100 Hz, it will
attenuate below 100 Hz while passes above that frequency value.
Low is around 50Hz to 150 Hz ,mid-low is around 150 Hz to 400 Hz , mid is around
500Hz to 4000 Hz. Mid-High is around 4000 Hz to 9000Hz, High is around 10000Hz to
16,000Hz.
8. Emerson R. Maningo Says:
October 2nd, 2009 at 4:59 pm
Hi Daniel The Translator,
Sorry it takes me a long time to reply, Ive been very busy for the past weeks, anyway I
have listen to Egipto and Chinesa here: http://palcoprincipal.sapo.pt/dharma , is that
the songs you mean? All I can say is that they are fairly good rock recordings, though it
seems that the drums lost some punch. But the vocals are considered OK for a rock
recording (partially buried in the mix). However the songs can be improve.
9. BigSean Music Says:
March 1st, 2010 at 2:30 am
hey emerson i really really enjoy and learn from this god bless u man god bless u i have
one question plz is there a big difference between the dynamic and condencer? cuz im
having a dynamic mic and i wanna make excellent vocals is it possible?
10. BigSean Music Says:
March 1st, 2010 at 2:32 am
btw this is my youtube page i would love to hear some feedback about my music in
general thank u http://www.youtube.com/kind1277
11. Emerson Maningo Says:
March 2nd, 2010 at 7:01 pm
Hi BigSean,
No question about purchasing condenser microphones for recording excellent vocals. It is
the standard way of recording vocals for professional recording studios, those big studios
used by the recording labels.
But, is there a big difference? The answer is NO, based on my experience, with proper
miking, EQ, compression and mixing techniques, listeners does not care whether the
vocals has been recorded with condenser or not. You can record great vocals using
dynamic microphones and with proper techniques applied (discused in this blog), there is
no big difference provided you know how to work with it during recording and mixing
sessions.
12. Emerson Maningo Says:
March 2nd, 2010 at 7:09 pm
Bigsean,
What a cool beat man! http://www.youtube.com/watch?v=YcsLcnlY0rc , keep up the
good work.
13. Essentialz Says:
April 30th, 2010 at 1:58 am
Hey im gonna leave a link to my youtube, http://www.youtube.com/officialessentialz .
Ive been recording for a while with just my laptop, mic with pop filter and little preamp
that i picked up. If any could listen and has some tips please help me out, i would really
appreciate it.
14. Emerson Maningo Says:
May 2nd, 2010 at 8:43 pm
Hi Essentialz,
Wow, I just can hardly believe you have basically complete the recording using a laptop,
mic and little preamp. I did hear your songs in Youtube and the following are my
constructive comments that can further improve the quality of your recording:
a. Fat bass drum- you need to cut down the fat bass frequencies at 400 Hz, Q=2.0 , cut it
with -6dB to -9dB. This will make the bass sounds so fat. You do not need to compress
your fat bass drum. So you need to balance the fat bass drum not to be too dominant in
your mix.
b. Vocals your vocals sounds too hot. You can either lower the vocals volume just a bit
in order to balance with the rest of the instruments.
c. The EQ of your vocals is already OK.
Keep up the good work!
15. Diego Avendano Says:
June 28th, 2010 at 9:17 am
I like the tips though I felt differently on a few things.
1. I would never record vocals as hot as possible before clipping. That would be shooting
yourself in the foot. If you plan on mixing these vocals and compressing them you
completely destroyed your headroom. I feel vocals should be recorded right in the
middle. Not too hot and not too low due to ground noise.
2. I would ever take out breathing in vocals. It makes the vocals sound real. Without the
breathing it leaves the vocals sounding artificial. The editing that should be done should
be extra noise in the begining and end of every take with a fade in and out.
3. I agree with the idea of not too much reverb but i feel your wet mix in reverb should be
at 100% and adjust the levels from your fx sends. This is because of phasing.
thanks for this blog
16. Emerson Maningo Says:
June 28th, 2010 at 9:28 am
Hi Diego,
Your tips are definitely helpful and I agree with it. There are times when I take out
breathing (or minimize) if its too excessive and distracting to listen.. Yeah about
recording vocals hot and I never record at -3dB to 0dB range. Instead I adjust volumes to
make sure it peaks around -10dB to -8dB for the loudest vocal peak of the tracks which is
fine and a lot of headroom. Thanks for visiting my blog.
17. falgunan martinez Says:
February 6th, 2011 at 6:29 pm
enjoyed your blog a lot! im a newbie in recording like a pro but im already using adobe
audition for months LOL! im thankful I tried searching for guides like yours! but I hope
you do also have guides on where and how should I start recording upto finish! thx and
hoping for your reply!
18. Hulinning Says:
February 10th, 2011 at 7:19 pm
Have you ever used multi-band compressor for tunning live vocal? If yes, how do you do
it?
thanks
19. Emerson Maningo Says:
February 17th, 2011 at 8:18 pm
Hi Falgunan,
I have added a new section on how to use this website, it includes guides on how to start
recording from start to finish and that includes mixing. I am on the process of creating the
mastering guide but you can start using it. This is the URL:
http://www.audiorecording.me/getting-started-course-outline-in-home-recording-and-
sound-engineering.html
Thanks. Cheers.
20. Mon Says:
May 8th, 2011 at 5:12 pm
Hello Emerson,
I cant find anywhere else to post this question.
Its about recording vocals. Most other forums Ive read says that MONO should be for
vocal recording.
DO you record vocals in mono?
Thanks again for the help.
Mon
21. Emerson Maningo Says:
May 9th, 2011 at 6:17 pm
Hi Mon,
I will write a tutorial about this..Thanks for your feedback.
22. Emerson Maningo Says:
May 9th, 2011 at 11:40 pm
Hi Mon,
You can read this tutorial: http://www.audiorecording.me/recording-vocals-at-home-in-
mono-or-stereo-how-to-record-vocals-properly.html. I hope it clarifies everything.
Thanks.
23. Ron Says:
June 27th, 2011 at 4:29 am
Good basic settings, but a one size fits all EQ, particularly a recommendation to cut
vocals below 200hz is not at all good. Id rather advise a person to sweep that filter freq
from 200Hz to the minus side until excessive bass is rolled off. A 200hz fixed cut for all
voices, all genres is a recipe for disaster. There are times when you can roll off below 80-
100 and acually give a gentle boost at 200 with a high Q (narrow bandwidth). All
depends on voices and genres.
24. Emerson Maningo Says:
July 1st, 2011 at 8:08 pm
Hi Ron,
Of course, its not a one size fits all EQ , any audio mixer will know. Its because the
moment they set at 200Hz cutoff then the vocal does not sound good. It is a sign that the
setting itself is not optimal. So it make sense to sweep the filter freq to find the optimum
spot. I used that 200Hz cutoff for a specific vocalist, it will be different for other singers.
It is because some singers might have high or less bass content in their vocals. Thank you
so much for taking the time to comment.
25. Moses Says:
July 2nd, 2011 at 6:36 am
Hi Emerson,I mix vocals by leaving the lead voice at the centre and pan the backup
voices 40% right and left.Is this Right?
26. Emerson Maningo Says:
July 3rd, 2011 at 10:01 am
Yes, if it sounds good then its right. Lead vocals are often pan in the center while the
backup vocals are either left or right. You may want to make closer to the center like 20%
to 30%.
27. Jamtaktics Says:
July 8th, 2011 at 1:41 am
OK, Ill try this again, cause my comment got rejected last time I think that Im
recording well with one mic, but I want the opinion of a professional. Please look at least
one of my songs and give me some tips, cause I still dont feel like Im where I need to
be
thank you!
link to page: soundcloud.com/jamtaktics
28. vibhu Says:
July 13th, 2011 at 8:28 am
Great blog.
Rather newbie question: I am using Logic Pro. I am only planning to use the software
instruments and I noticed that these have EQ and compression already set (and some
more settings). So when I record my audio, I apply EQ and compression (and some
reverb) to my audio track only, and avoid altering instrument settings because I assume
these are the best settings for the instruments. Is this ok?
Second point: I have a nasal voice, so I cut frequencies at 1500 and 3500 with a Q of 1, -9
dB. Is this OK?
Ill try to post some recordings, but my compositions will sound a bit different because
these are not in english, and the scales are not standard western music scales.
Again, great blog. Keep it going. Best wishes.
29. Emerson Maningo Says:
July 13th, 2011 at 5:07 pm
Yeah probably but you cannot assume those are the best settings. You should use your
ear to adjust and experiment. I know it takes time but thats the only way to really correct
audio problems. For your second point, if you cut it does the nasality of the voices gone?
If yes, then problem solved, if not sweep the EQ around and find the best cutting spot.
Best on my experience, somewhere around 800Hz and 3000Hz are the frequencies to
check. Always use your ears to judge the correctness of an EQ setting.
30. Simon Says:
July 19th, 2011 at 10:05 am
Hi
Love these blogs and tips, I was wondering if anyone knows how to run a 400Hz High
Pass filter on Adobe Audition for Mac
According to production guru Dave Foxx, pretty much all the music is going on below
400hz therefore a high pass filter on the voice would make it sit better in promos etc
Hope you can help!
31. Emerson Maningo Says:
July 20th, 2011 at 11:13 pm
Actually what if the voice is baritone or alto, bass? Applying a 400Hz high pass filter
might attenuate a portion (although not everything) of these low frequency vocals
significantly. Then the result is that the vocals sound so thin. Then this setting is not for
everyone.
32. iyk-N Says:
January 9th, 2012 at 3:59 am
Hi Emerson,
Love your blog so much, want to know if its necessary using the send fx channel in
adding reverb or delay, and whats the work of the send effects channel?
33. Emerson Maningo Says:
January 9th, 2012 at 9:09 am
Hi,
Thank you for liking my blog, you can refer to these following tutorials for the answer:
http://www.audiorecording.me/pre-fader-vs-post-fader-aux-sendsreturn-and-insert-fx-
how-to-use-it.html
http://www.audiorecording.me/how-to-use-reverb-unit-with-mixing-console-using-aux-
sends-and-returns.html
http://www.audiorecording.me/how-to-connect-compressor-eq-in-mixer-inserts-and-
reverb-in-aux-sends.html
Name (required)
Mail (will not be published) (required)
Website
* Copy this password:
UFqIgxfkn3YJ

* Type or paste password here:


Audio Recording Home | Copyright 2009 2012 Emerson R. Maningo
MORE IN MUSIC MIXING
Tips in Mixing Bass Guitar like a PRO
Bass Guitar is very hard to mix. It is always the main reason why the...
Close