Ethernet Coaxial Extender For 10/100 Networks: Eis-Extend-C

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

WWW.BB-ELEC.

COM |
Ethernet Coaxial Extender
for 10/100 Networks
EIS-EXTEND-C
The model EIS-EXTEND-C allows your existing coaxial cable to be used to
extend Ethernet connections up to 8530 feet (2,600 M).
Two EIS-EXTEND-C models are required for the Ethernet extension, (one at
each end of your extension points). This product can be used with included
power supply or in a 19 inch rack mount chassis, which can house up to
16 EIS-EXTEND-C units or EIS Media Converters.
One 10/100Base TX (TX) Ethernet port with RJ-45 connector
Auto negotiation of speed and duplex mode on TX port
Auto MDI/MDIX on Ethernet port
IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX compliant
Line port uses BNC connector or F-Type connector
Line port link is full-duplex up to 85Mbps over existing coaxial cable
One DIP switch for confguring local or remote mode
Status LEDs for monitoring and connection status
External AC to DC power adapter included
Used as a stand-alone device or with a 19 inch rack chassis
Hot-swappable when used in 19 inch rack chassis
PRODUCT FEATURES
ORDERING INFORMATION
MODEL NUMBER DESCRIPTION
EIS-EXTEND-C
10/100-TX Ethernet Copper Extender w/USA Power
Adaptor
EIS-EXTEND-C-UK
10/100-TX Ethernet Copper Extender w/USA Power
Adaptor
EIS-EXTEND-C-EU
10/100-TX Ethernet Copper Extender w/EU Power
Adaptor
MECHANICAL DIAGRAM

10.92cm
4.30 in
8.03cm
3.16 in
2.38cm
0.94 in

10.92cm
4.30 in
8.03cm
3.16 in
2.38cm
0.94 in
ACCESSORIES
EIS-RACK-PS - Power Supply For EIS-Rack-16, 84 Watts
EIS-RACK-16 - Media Converter 19 Inch 2U Rack Chassis - 16 Slots
EIS-EXTEND-C_3713ds
International Ofce: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Ofce: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
[email protected]
[email protected]
Ethernet Coaxial Extender
for 10/100 Networks
EIS-EXTEND-C
REGULATORY APPROVALS
RoHS - Yes
Safety UL60950-1, EN60950-1, IEC60950-1
EMI
FCC Part 15, Class A
VCCI, Class A
EN61000-6-3
EN55022, EN61000-3-2, EN61000-3-3
EMS
EN61000-6-2
EN61000-4-2 (ESD Standards) Contact: + / - 4KV;
Criteria B Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to
1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards) Signal Ports: + / 2KV;
Criteria B D.C. Power Ports: + / 2KV; Criteria B
EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV;
Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV;
Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards) Signal Ports:
10Vrms @ 0.15~80MHz; 80% AM Criteria A D.C. Power
Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50,
60Hz; Criteria A
Environmental Test
Compliance
IEC60068-2-6 Fc (Vibration Resistance) 5g @
10~150KHz, Amplitude 0.35mm (Operation/Storage/
Transport)
IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine
Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock
Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall) 1M (3.281 ft.)
SPECIFICATIONS
ETHERNET TECHNOLOGY
Standards
IIEEE802.3 10Base-T, IEEE802.3u 100Base-TX,
IEEE802.3x, Ethernet over VDSL
Protocols Transparent to higher layer protocols
Processing Type IEEE802.3x Full-duplex ow control
INTERFACE
Ethernet Port
RJ-45, 10/100Base-TX Full/Half-duplex Auto-
Negotiation, Auto-MDI/MDIX
Speed 10/100Mbps
Distance 328 ft. (100meters)
Cable
10Base-T: UTP CAT. 3, 4, 5 (2-pair wire), 100Base-TX:
UTP CAT. 5 (2-pair wire)
Extender Line Port BNC Coaxial
Speed 1/5/10/20/30/40/50/60/70/75Mbps
Distance 8,530 ft. (2,600meters)
Cable Coaxial Cable (5C2V / RG6AU)
POWER
Input Voltage 12 VDC
Power Consumption 5.76W Max. 0.48A@12VDC
ENVIRONMENTAL
Operating Temperature: -10C to 60C (14F to 140F)
Storage Temperature -20C to 70C (-4F to 158F)
Humidity 5% to 95% (non-condensing)
MTBF 57,515 hours
MTBF Calculation Parts count reliability prediction
MECHANICAL
Enclosure Aluminum case
Dimensions
8.03cm (W) x 10.92cm (D) x 2.38cm (H)
3.16 (W) x 4.30 (D) x 0.94 (H)
Weight 150g (0.33 lb.)
FRONT PANEL LEDS (ETHERNET AND LINE CONNECTIONS)
Port LEDs Status Description
Ethernet (RJ-45) Pwr Steady Power on (Pwr stands for POWER)
Off Power off
Lnk/Act Steady Valid Ethernet connection established (Lnk
stands for LINK)
Flashing Transmitting or receiving Ethernet data (Act
stands for ACTIVITY)
Off No valid Ethernet connection nor
transmitting/receiving Ethernet data
Fdx Steady Ethernet connection in full duplex mode
(Fdx stands for FULL-DUPLEX)
Flashing Collision occurred
Off Ethernet connection in half-duplex mode
Line (BNC) Rmt Steady The device operates in remote mode
Loc Steady The device operates in local mode
Err Steady Error occurred
Lnk Steady A valid connection established between
local & remote units
TOP LEDS (BNC LINE CONNECTIONS)
LEDs Status Speed Distance
1
Green 1~ 5Mbps up to 2600M
Amber 6~10Mbps up to 2400M
2
Green 11~16Mbps up to 2000M
Amber 17~20Mbps up to 1800M
3
Green 21~29Mbps up to 1600M
Amber 30~43Mbps up to 1400M
4
Green 44~54Mbps up to 1200M
Amber 55~63Mbps up to 1000M
5 Green 64~74Mbps up to 600M
Amber 75~85Mbps up to 200M

You might also like