7300B Eng

1
Polyethylene
TIPELIN 7300B
Bimodal HDPE for blow moulding
**************************************************************************

Description
TIPELIN 7300B is a high density bimodal polyethylene copolymer (with
butene-1 as comonomer) intended for blow moulding of products with high
stiffness and excellent environmental stress crack resistance (ESCR).The
grade contains antioxidant and acid scavenger.

Applications
TIPELIN 7300B is recommended for blow moulding of jerry cans for
packaging of aggressive industrial chemicals bounded to UN certificates. The
grade is recommended for sheet extrusion as well. It is suitable for
corrugated pipes too.
TIPELIN 7300B is suitable for food contact and for manufacturing of
pharmaceutical packing products. The product complies with Food Contact
and Pharmaceutical Regulations.

Properties
Test method Unit Typical value
Melt Mass-Flow Rate (MFR) (190 C /2.16 kg) ISO 1133 g/10 min 0,10
Melt Mass-Flow Rate (MFR) (190 C /5.0 kg) ISO 1133 g/10 min 0,40
Melt Mass-Flow Rate (MFR) (190 C /21.6 kg) ISO 1133 g/10 min 12
Density (23 C) * ISO 1183-2 kg/m
3
955
Tensile Strength at Yield * ISO 527-3 MPa 29
Tensile Strain at Yield * ISO 527-3 % 12
Tensile Strength at Break * ISO 527-3 MPa 36
Tensile Strain at Break * ISO 527-3 % 1350
Flexural Modulus * ISO 178 MPa 1600
IZOD Impact Strength (notched, 23 C) * ISO 180/ A kJ/m
2
18
Vicat Softening Temperature * ISO 306/A 120 C 127
Shore D Hardness * ISO 868 - 64
ESCR F50 B (10% Igepal CO-630) * ASTM D 1693 h 1300
OIT (200 C) * EN 728 min 56

Typical properties, not to be used as specification.
* Average mechanical property values of several measurements carried out on standard pressed specimens (ISO 293)
conditioned at room temperature (ISO 291).

2
Processing
TIPELIN 7300B can be used in conventional blow moulding machines.
Recommended processing temperature 180-220 C.

Storage and Handling
Pellets are packed in 25 kg PE-LD bags and transported on stretch-wrapped pallets
at load of polymer 1375 kg. Heat treated pallets are available as well. Transportation
in a road silo or rail silo is also available. For more detailed information please
contact SLOVNAFT a.s. and TVK Plc. sales representative.
Since polyethylene is a combustible substance, the fire safety rules applicable for
combustible materials in warehouses and store rooms should be observed.
If polymer is stored in conditions of high humidity and fluctuating temperatures, then
atmospheric moisture can condense inside the packing. If it happened, it is
recommended the pellets to be dried before use. During the storage polyethylene
should not be exposed to UV radiation and temperatures above 40 C. Producer
does not take responsibility for any damages caused by adverse storage.

REACH Statement
Polymers are exempt of REACH registration. However their raw materials which
mean monomers, catalysts and relevant additives have been registered. TVK Plc.
and SLOVNAFT a.s. are committed to fully respect legislation and will only use
REACH compliant raw materials. At this point in time TIPELIN do not contain any
substances specifically identified as SVHC at levels greater than 0.1%.

Safety
See MSDS.

Recycling
Polyethylene resins are suitable for recycling using modern recycling methods.
In-house production waste should be kept clean to facilitate direct recycling.

Disclaimer
The information provided in this publication has been compiled to the best of our present knowledge.
However, in view of the various applications of polyethylene resins and the equipments used, the
processing conditions may differ.
The recommendations and data herein are to be construed as informatory only and do not relieve users
from carrying out their own tests and experiments prior to processing in order to check suitability for a
specific use. It is the responsibility of those to whom we supply our products to ensure that any proprietary
rights and existing laws and legislation are observed. Our products are under continuous development,
therefore we reserve the right to change the information presented in this brochure at our own discretion.
The REACH statement herein does not constitute legal advice. The REACH statement is provided for
informational purpose only.

3
MANUFACTURER

TVK Plc.
H-3581 Tiszajvros,
P.O. Box: 20
Hungary
Internet: www.tvk.hu
E-mail: [email protected]

POLYMER TECHNICAL SERVICE

TVK Plc.
Polymer Marketing and Sales
Polymer Technical Service
H-3581 Tiszajvros,
P.O. Box: 20
Hungary
Fax: + 36 49 521-186

Polymer Technical service for PE
Telephone: + 36 49 522-607, + 36-80 204-249,

Polymer Technical service for PP
Telephone: + 36 49 521-540, + 36-80 204-248

4
TVK Plc.
H-3581 Tiszajvros,
P.O. Box: 20
Hungary
Telephone: +36 49 521-355
Fax: +36 49 522-410

SLOVNAFT, a.s..
Vlie hrdlo 1
824 12 Bratislava
Slovak Republic
Telephone: + 421 2 5859 7515
+ 421 2 5859 7231
+ 421 2 5859 7741

MOL Germany GmbH.
Fellnerstrasse 7-9.
D-60322 Frankfurt am Main
Germany
Telephone: +49 69 154 04 0
Fax: +49 69 154 04 41
E-mail:
[email protected]

TVK Italia S.r.l.
Via Teuli, 1
20136 Milano
Italy
Telephone: +39 02 58 30 5523
Fax: +39 02 58 30 3492

TVK France
182 avenue Charles de Gaulle
F-92200 Neuilly-sur-Seine
France
Telephone: +33 (0)1 47 45 63 60
Fax: +33 (0)1 47 45 45 10

January 2013

MOL Ukraine LLC
04655 Kiev
Moskovskiy ave, 23, 7th floor
Ukraine
Telephone: +380 44 374 00 80
+380 67 463 58 69
Fax: +380 44 374 00 90

Slovnaft Polska S.A.
PetChem Department
ul. Wwozowa 23/12
PL 02-796 Warszawa
Poland
Telephone: +48 22 545 70 70
Fax: +48 22 545 70 60

MOL- Austria Handels GmbH.
Gartenbaupromenade 2/6
A-1010 Wien
Austria
Telephone: +43 1 515 991 120
+43 1 515 991 121
Fax: +43 1 513 37 55 1120
+43 1 513 37 55 1121

SC. MOL Romania P.P. SRL
Str. Danielopolu 4-6
ET2 Sector 1 Cod 014 134
Bucuresti, Romania
Telephone: +40 21 204 85 00
+40 21 204 85 02
Fax: +40 21 232 1059

Other European Countries
Telephone: +36 49 521 355
+ 421 2 5859 7515
+ 421 2 5859 7516
Fax: +36 49 522 410
[email protected]

7300B Eng

Uploaded by

Copyright:

Available Formats

7300B Eng

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

7300B Eng

Uploaded by

Copyright:

Available Formats

1

You might also like