Actuator Catalog

More than a quarter of a centurys
manufacturing experience has gone into

every product that
carries the Neptronic
name. From inspi-
ration to realization,
innovation has been
the standard in
design. As a result
of this dedication, National Environmental
Products owns several patents, notably the
Enerdrive System and the AFEC System.
Manufacturing is conducted on the premises of
our modern 80,000 sq. ft. facility in Montreal,
Canada.The com-
ponents used are
precision engi-
neered and care-
fully inspected to
ensure product
integrity and each
product manufactured undergoes rigorous
testing to guarantee its performance and
dependability.
Actuator Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Actuator Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Actuator Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Nomenclature Explained . . . . . . . . . . . . . . . . . . . . . . . .7
Actuator Flow Charts: 18-70 in.lb (2-8 Nm) torque . . . . . . .8
Actuator Flow Charts: 140-4000 in.lb (16-450 Nm) torque .10
C Series Actuator (18 in.lb.) . . . . . . . . . . . . . . . . . . . . .12
D Series Actuator (35 in.lb.) . . . . . . . . . . . . . . . . . . . . .14
B Series Actuator (50 in.lb.) . . . . . . . . . . . . . . . . . . . . .16
B Series Actuator (50 in.lb.) Slow Motion . . . . . . . . . .20
S Series Actuator (70 in.lb.) . . . . . . . . . . . . . . . . . . . . .24
L Series Actuator (140 in.lb.) . . . . . . . . . . . . . . . . . . . .28
T Series Actuator (180 in.lb.) . . . . . . . . . . . . . . . . . . . .30
R Series Actuator (360 in.lb.) . . . . . . . . . . . . . . . . . . . .34
U & W Series Actuator (1800 to 4000 in.lb.) . . . . . . . .38
Fast Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Smoke Damper Actuators . . . . . . . . . . . . . . . . . . . . . .49
IP65 / NEMA 4 Actuator . . . . . . . . . . . . . . . . . . . . . . . .53
A Series Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
SLD Mechanical Stroke Limiting Device . . . . . . . . . . .60
Actuator Dimensions & Installation . . . . . . . . . . . . . . .62
Actuator Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .63
Enerdrive Explained . . . . . . . . . . . . . . . . . . . . . . . . . . .64
List of Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Competition Cross Reference . . . . . . . . . . . . . . . . . . .66
Contents
Important Note: Information such as specification or prices contained in this catalogue is subject to change. For
last updated information please consult www.neptronic.com
Visit us on the web at www.neptronic.com 4
Actuator Applications
Neptronic Actuators for Globe Valves
The A and M family of linear actuators
operate 2 way and 3 way globe
valves. They are equipped with elec-
tronic stroke adjustment, can accept
analog, tri-state, on/off and PWM
control signals and are available
with the patented enerdrive fail safe
system. They will adapt to many dif-
ferent makes of globe valves with our
retrofit linkage assemblies.
Neptronic Actuators for Dampers
We build a comprehensive line of
damper actuators. The versatile
multi-signal actuators, the fast
actuators for precise laboratory
fume hood control and the high
torque U & W actuators place us at
the forefront of actuator technology.
Neptronic Actuators for various Valve Types
Neptronic actuators mount on ball
valves, globe valves and butter-
fly valves of different size and
make, combining rugged mounting
hardware with a smooth opera-
tion. For fluid control see our
Neptronic valve catalog.
Neptronic Actuators for VAV Boxes
Neptronic actuators for close con-
trol of VAV systems have electronic
stroke and zero & span adjust-
ment. They are compatible with
building automation systems and
are easy to install and commission.
Actuator Introduction
Inherent in each Neptronic actuator
is the experience gained in addressing the concerns and
requirements of the building automation industry. This
means simplicity in the appropriate model selection,
quick and easy installation and trouble free commissioning.
Only Neptronic offers the widest selection of torque out-
put, control signals and rotational speeds in both fail safe
and non-fail safe motors. Only Neptronic developed the
patented Enerdrive System, the modern, electronic
replacement for antiquated spring return.
The Neptronic family of actuators is
divided foremost by the torque capability. Direct coupled
models deliver up to 18 in.lb. (C), 35 in.lb. (D), 50 in.lb. (B),
70 in.lb. (S), 140 in.lb. (L), 180 in.lb. (T) or 360 in.lb. (R) at
rated voltage and are suitable for applications from small
variable air volume boxes to large air handler dampers.
The most powerful units available (U & W) produce from
1800 in.lb. to 4000 in.lb. and are mounted on large
Butterfly valves, vortex dampers or fan inlet guide vanes.
Control signal selection is simple.
Choose digital or multi signal (analog) regardless of the
size. All digital models, including those with Enerdrive,
may be wired for 2 position or 3 point floating control.
Similarly, all multi-signal (analog) models may be wired
and calibrated in the field to respond to 2-10VDC,
4-20mA, pulse width modulating, 2 position or floating
control. In addition, the multi signal (analog) motors fea-
ture electronic stroke adjustment and zero & span signal
conditioning.
Neptronic is the leader
in developing fast response technology. In the B classifi-
cation, the rotational speed of these models varies from
1.5 to 6 seconds. Their primary use is in fume hood
damper control in clean room applications. Larger fast
response models with the T and R classification have a
20 second timing and are applicable in smoke control,
stairwell pressurization and generator room installations.
For applications where fast response is not essential,
Neptronics standard models deliver rotational speeds
from 60 to 100 seconds of quiet, smooth operation.
Neptronic is the only manufacturer
to incorporate fail safe functionality in all its directly cou-
pled actuator models without any changes to physical
dimensions, torque outputs, rotational times or control
signal processing. How is this possible? By inventing, in
1992, a super capacitive return system called Enerdrive,
Neptronic was able to eliminate the bulky mechanical
components that require increased space or that affect
either the torque or response time. Since its introduction
to the HVAC marketplace, Enerdrive has proven its
versatility and dependability.
Enerdrive, the Electronic Spring is
a system that is fully incorporated into the PC board for
both low and line voltage service. The power generated
and stored in its capacitors will drive the controlled device
at full rated torque to its safety position. It is 100% oper-
ational with the resumption of power. Enerdrive models
may be manually positioned with the clutch override that
is standard on all Neptronic actuators. Most importantly,
the final fail position, either normally open or normally
closed may be chosen at any time either before or after
installation with the flick of a dip switch. A more detailed
description of Enerdrives operational characteristics is
located on page 64.
Easily installed, Neptronic
actuators mount directly on the jack shaft without any
extra attachments. Neptronic has standardized its
electronic functions and programming so that all digital
models are wired alike as are all multi signal (analog)
models. The end result is faster installation and
commissioning.
Actuator Sizing
Important data required when sizing an actuator to a damper:
Size of Damper
Type of Damper
Face Velocity
Static Pressure
Given the above parameters, consult the damper manufacturers specifications for the torque
(in. lb. per square foot) required to operate the damper. (velocity and static pressure charts for
the specific style of damper, ie. Parallel blade, opposed blade, with or without blade seals, etc.)
If no information is available use the following table as an approximate industry standard.
DAMPER REQUIREMENTS (in.lb./sq. ft.)
Face Velocity (FPM)/ Static Pressure (in. Wc.)
Parallel blades with seals 4 7 10.5 12 14
Opposed blades with seals 3 5 7.5 8.5 10
Parallel blades without seals 3 4.5 6.5 7 8
Opposed blades without seals 2 3 4.5 5 6
<500 FPM
1 in. Wc.
500-1000 FPM
2 in. Wc.
1000-1500 FPM
3 in. Wc.
1500-2000 FPM
4 in. Wc.
2000-3000 FPM
4 in. Wc.
When the proper torque (in. lb./sq. ft.) is known for the specific damper application:
Damper Requirements (in.lb./ft
2
) X Surface Area of Damper (ft
2
)
= Total Torque (in.lb.) Required
When you select your actuator it is good practice to oversize by at least 20%.
Note: For off center pivot dampers, the above rules do not hold. For these types of dampers as
well as inlet guide vanes or fan vortex dampers, one must obtain the torque requirements from
the manufacturer of the damper.
Nomenclature Explained
Neptronic Actuator Selection Code B M 0 6 0 F N
TORQUES
C 18 in.lb. (2 Nm)
D 35 in.lb. (4 Nm)
B 50 in.lb. (5.6 Nm)
S 70 in.lb. (8 Nm)
L 140 in.lb. (16 Nm)
T 180 in.lb. (20 Nm)
R 360 in.lb. (40 Nm)
U & W 1800 to 4000 in.lb. (200 to 450 Nm)
CONTROL SIGNAL
T ON-OFF / 3 point floating
M ON-OFF / 3 point floating / analog / pwm
or analog only (2-10vdc)
POWER SUPPLY
0 24 vac or 30 vdc
1 120 vac
2 240 vac
3 120/240 vac or 24/120/240 vac
FUNCTIONS
00 standard
05 potentiometer (feedback, 5 K ohms)
10 Fail Safe (battery)
20 auxiliary contacts (2)
30 Fail Safe (battery) & auxiliary contacts (2)
60* Fail Safe (Enerdrive*)
65* Fail Safe (Enerdrive*) & potentiometer (feedback, 5 K ohms)
80* Fail Safe (Enerdrive*) & auxiliary contacts (2)
OPTIONS
- leave blank if no option
F fast (BT=6sec., BM=3.5sec., T & R=20sec.)
FF very fast (BM=1.5sec.)
S Slow motion (90 seconds running time)
X_ _ Smoke Damper actuator
4 = 35 in.lb. (4 Nm), 8 = 70 in.lb. (8 Nm) & 11 = 90 in.lb. (11 Nm)
N Brushless Motor D.C.
W IP65 equivalent to Nema type 4 enclosure, available for L, T and R series actuators
*ENERDRIVE: fail safe system by electronic spring U.S. patent #5,278,454
Actuator Flow Charts (18 to 70 in.lb. torque)
Torque
18in.lb. (2Nm)
C
Torque
35in.lb. (4Nm)
D
Torque
50in.lb. (5.6Nm)
B
Torque
70in.lb. (8Nm)
S
18 to 70 in.lb. torque fail safe actuators
(enerdrive system)
3 point
floating
on-off Analog
Torque
18in.lb. (2Nm)
C
Torque
35in.lb. (4Nm)
D
Torque
50in.lb. (5.6Nm)
B
Torque
70in.lb. (8Nm)
S
CT160S
CT165S
CT180S
CT260S
CT265S
CT280S
CM160S
CM180S
CM260S
CM280S
3 point
floating
on-off Analog
120VAC 120VAC
240VAC 240VAC
DT160S
DT165S
DT180S
DT260S
DT265S
DT280S
DM160S
DM180S
DM260S
DM280S
3 point
floating
on-off Analog
120VAC 120VAC
BT160
BT180
BT160S
BT165S
BT180S
BT260
BT280
BT260S
BT265S
BT280S
BM160S
BM260S
Analog
120VAC 120VAC
240VAC 240VAC
ST160S
ST165S
ST180S
ST260S
ST265S
ST280S
SM160S
SM260S
3 point
floating
Analog
120VAC 120VAC
on-off
BM060
BM060N
BM080
BM060S
BM080S
3 point
floating
on-off
Multi Signal
(Analog)
24VAC
BT060
BT065
BT080
BT060S
BT065S
BT080S
24VAC
CT060S
CT065S
CT080S
24VAC
CM060S
CM080S
24VAC
DT060S
DT065S
DT080S
24VAC
DM060S
DM080S
24VAC
3 point
floating
on-off Analog
ST060S
ST065S
ST080S
24VAC
SM060S
SM080S
24VAC
3 point
floating
on-off Analog
Neptronic actuator models ending in N are brushless motors.
Neptronic actuator models ending in 80 (S) include Enerdrive (Fail safe) and End Switches.
Neptronic actuator models ending in 65 (S) include Enerdrive (Fail safe) and Feedback.
240VAC 240VAC 240VAC 240VAC

3 point
floating
on-off
Actuator Flow Charts (50 to 70 in.lb. torque)
Torque
50in.lb. (5.6Nm)
B
Torque
70in.lb. (8Nm)
S
BT100
BT105
BT120
BT100S
BT105S
BT120S
BT200
BT205
BT220
BT200S
BT205S
BT220S
BM100S
BM200S
3 point
floating
on-off Analog
120VAC 120VAC
240VAC
240VAC
ST100S
ST105S
ST120S
ST200S
ST205S
ST220S
SM100S
SM200S
3 point
floating
Analog
120VAC 120VAC
240VAC
on-off
Torque
50in.lb. (5.6Nm)
B
Torque
70in.lb. (8Nm)
S
3 point
floating
on-off
Multi Signal
(Analog)
ST000S
ST005S
ST020S
24VAC
SM000S
SM020S
BM000
BM000N
BM020
BM020N
BM000S
BM020S
24VAC
BT000
BT005
BT020
BT000S
BT005S
BT020S
24VAC 24VAC
3 point
floating
on-off Analog
50 to 70 in.lb. torque non fail safe actuators
Neptronic actuator models ending in 20 (S) include End Switches.
Neptronic actuator models ending in 05 (S) include Feedback.
240VAC
Actuator Flow Charts (140 to 4000 in.lb torque)
140 to 4000 in.lb. torque fail safe actuators
(enerdrive system)
Torque
140in.lb. (16Nm)
L
Torque
180in.lb. (20Nm)
T
Torque
360in.lb. (40Nm)
R
Torque range
1800 to 4000in.lb.
(200 to 450Nm)
U & W
LT060
LT065
LT080
LM060
LM080
3 point
floating
on-off
Multi Signal
(Analog)
24VAC 24VAC
TT060
TT065
TT080
TM060
TM080
TM060N
TM080N
3 point
floating
on-off
Multi Signal
(Analog)
24VAC 24VAC
RT060
RT065
RT080
RM060
RM080
RM060N
RM080N
3 point
floating
Multi Signal
(Analog)
24VAC 24VAC
on-off
UT010
UT030
WT010
WT030
UM010
UM030O
WM010
WM030O
3 point
floating
Multi Signal
(Analog)
24VAC 24VAC
on-off
Torque
140in.lb. (16Nm)
L
Torque
180in.lb. (20Nm)
T
Torque
360in.lb. (40Nm)
R
Torque range
2500 to 4000in.lb.
(280 to 450Nm)
U & W
LT360
LT365
LT380
LM360
LM380
3 point
floating
on-off
Multi Signal
(Analog)
120/240VAC 120/240VAC
TT360
TT365
TT380
TM360
TM380
TM360N
3 point
floating
on-off
Multi Signal
(Analog)
120/240VAC 120/240VAC
RT360
RT365
RT380
RM360
RM380
RM360N
3 point
floating
Multi Signal
(Analog)
120/240VAC 120/240VAC
on-off
UM310
UM330O
WM310
WM330O
Multi Signal
(Analog)
120/240VAC
Neptronic actuator models ending in 80 include Enerdrive (Fail safe) and End Switches.
Neptronic actuator models ending in 65 include Enerdrive (Fail safe) and Feedback.
Neptronic actuator models ending in 30 include Battery (Fail safe) and End Switches.
O
Actuator Flow Charts (140 to 4000 in.lb torque)
140 to 4000 in.lb. torque Non fail safe actuators
Torque
140in.lb. (16Nm)
L
Torque
180in.lb. (20Nm)
T
Torque
360in.lb. (40Nm)
R
Torque range
1800 to 4000in.lb.
(200 to 450Nm)
U & W
LT000
LT005
LT020
LM000
LM020
3 point
floating
on-off
Multi Signal
(Analog)
24VAC 24VAC
TT000
TT005
TT020
TM000
TM020
TM000N
TM020N
3 point
floating
on-off
Multi Signal
(Analog)
24VAC 24VAC
RT000
RT005
RT020
RM000
RM020
RM000N
RM020N
3 point
floating
Multi Signal
(Analog)
24VAC 24VAC
on-off
UT000
UT020
WT000
WT020
UM000
UM020
WM000
WM020
3 point
floating
Multi Signal
(Analog)
24VAC 24VAC
on-off
Torque
140in.lb. (16Nm)
L
Torque
180in.lb. (20Nm)
T
Torque
360in.lb. (40Nm)
R
Torque range
2500 to 4000in.lb.
(280 to 450Nm)
U & W
LT300
LT305
LT320
LM300
LM320
3 point
floating
on-off
Multi Signal
(Analog)
120/240VAC 120/240VAC
TT300
TT305
TT320
TM300
TM320
TM300N
TM320N
3 point
floating
on-off
Multi Signal
(Analog)
120/240VAC 120/240VAC
RT300
RT305
RT320
RM300
RM320
RM300N
RM320N
3 point
floating
Multi Signal
(Analog)
120/240VAC 120/240VAC
on-off
UM300
UM320
WM300
WM320
Multi Signal
(Analog)
120/240VAC
Neptronic actuator models ending in 20 include End Switches.
Neptronic actuator models ending in 05 include Feedback.

C Series Actuator (slow motion)
18 in.lb. (2 Nm) torque
PRIMARY USES FOR THESE ACTUATORS
N small dampers N unit ventilators
N VAV box control N fan coils
These compact quarter turn actuators may be directly coupled to either a 1/2 inch round
or 3/8 inch square jack shaft or remotely mounted using an adaptor kit. All actuators are
bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions. The stroke
may be limited to less than 90 mechanically.
GENERAL SPECIFICATIONS
Power Supply:
Power Consumption:
Wire Size:
Electrical Connections:
Control Signals:
Torque:
Direction & Time of Rotation:
Ambient Temperature:
Feedback Potentiometer:
Fail Safe (Enerdrive) Rating:
Enerdrive Response Time:
Auxiliary Switches:
Auxiliary Switch Rating:
Electronic Enclosure:
GearTrain Enclosure:
24VAC/30VDC, 120VAC or 240VAC Depending upon the Model
Peak at Start-up: 10VA at 26VAC or at Line Voltage
Operating at Full Load: 3VA at 26VAC or at Line Voltage
18 AWG (0.8 mm
2
) Minimum
5/8 in. (15.9 mm) & 7/8 in. (22.2 mm) Knock Outs, Screw Terminals
Digital (CT):
2 Wire 2 Position and 4 Wire 3 Point Floating
Analog (CM):
A) 2-10VDC; or B) 4-20mA
18 in.lb. (2 Nm) at Rated Voltage
Reversible, 80 Sec. at no load and 100 sec at full load
0F to +122F (-18C to +50C)
In Digital (CTXX5S): Potentiometer (5Kohms)
18 in.lb. (2 Nm)
20-40 Seconds Closure Through 90, 18 in.lb. (2 Nm)
Models Ending in 80S: 2 Mechanical, Fixed at 10 & 80
5 Amp Resistive, 250VAC
Flammability rating UL94-5V
Die Cast Zinc with a Steel Base
C Series Quick Select
Spec Sheet Available on Our Website
Actuator
Models
Power Control Signals
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Consumption Digital Multi Signal
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
for low voltage applications
CT060S
24VAC
30VDC
10VA 3VA N N 80 to 100 N $ 227
CT065S
24VAC
30VDC
10VA 3VA N N 80 to 100 N N $ 283
CT080S
24VAC
30VDC
10VA 3VA N N 80 to 100 N N $ 289
CM060S
24VAC
30VDC
10VA 3VA N N 80 to 100 N $ 272
CM080S
24VAC
30VDC
10VA 3VA N N 80 to 100 N N $ 334
for line voltage applications
CT160S 120VAC 10VA 3VA N N 80 to 100 N $ 261
CT165S 120VAC 10VA 3VA N N 80 to 100 N N $ 317
CT260S 240VAC 10VA 3VA N N 80 to 100 N $ 261
CM160S 120VAC 10VA 3VA N N 80 to 100 N $ 295
CM180S 120VAC 10VA 3VA N N 80 to 100 N N $ 357
CM260S 240VAC 10VA 3VA N N 80 to 100 N $ 295
CM280S 240VAC 10VA 3VA N N 80 to 100 N N $ 357
D Series Actuator (slow motion)
N small dampers N unit ventilators N 1/4 turn valves
or 3/8 inch square jack shaft or remotely mounted using an adaptor kit. All actuators
are bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions. The
stroke may be limited to less than 90 mechanically.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
Peak at Start-up: 15VA at 26VAC
12VA at Line Voltage
Operating at Full Load: 6VA at 26VAC or at Line Voltage
18 AWG (0.8 mm
2
) Minimum
Digital (DT):
2 Wire 2 Position and 4 Wire 3 Point Floating
Analog (DM):
A) 2-10VDC; or B) 4-20mA
Reversible, 90 Sec. / 0-35 in.lb. (0-4 Nm)
-22F to +122F (-30C to +50C)
In Digital (DTXX5S): Potentiometer (5Kohms)
35 in.lb. (4 Nm)
70-80 Seconds Closure Through 90, 0-35 in.lb. (0-4 Nm) Depending upon the Model
Models Ending in 80S: 2 Mechanical, Fixed at 10 & 80
1 Amp Resistive, 24VAC or 5 Amp Resistive, 250VAC Depending upon the model
D Series Quick Select
Note: All numbers in parenthesis represent the old nomenclature and will be phased out by Dec. 31, 2008
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
DT060S
(MDTS1060)
24VAC
30VDC
15VA 6VA N N 90 to 110 N $ 250
DT065S
(MDTS1065)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 312
DT080S
(MDTS1080)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 312
DM060S
(MDMS2060)
24VAC
30VDC
15VA 6VA N N 90 to 110 N $ 295
DM080S
(MDMS2080)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 357
DT160S 120VAC 12VA 6VA N N 90 to 110 N $ 283
DT165S 120VAC 12VA 6VA N N 90 to 110 N N $ 339
DT260S 240VAC 12VA 6VA N N 90 to 110 N $ 283
DM160S 120VAC 12VA 6VA N N 90 to 110 N $ 317
DM180S 120VAC 12VA 6VA N N 90 to 110 N N $ 380
DM260S 240VAC 12VA 6VA N N 90 to 110 N $ 317
DM280S 240VAC 12VA 6VA N N 90 to 110 N N $ 380
B Series Actuator (low voltage)
50 in.lb. (5.6 Nm) torque
or 3/8 inch square jack shaft or remotely mounted using an adaptor kit. All actuators are bi-
directional. Enerdrive actuators are also bi-directional under fail safe conditions. The stroke
may be limited to less than 90 mechanically in digital models and electronically in Multi Signal
models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC or 24VDC Depending upon the Model
Peak at Start-up: 3VA to 24VA at 26VAC Depending upon the Model
Operating at Full Load: 3VA to 15VA at 26VAC Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Digital (BT):
2 Wire or 3 Wire 2 Position and 3 Wire or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (BM):
ANALOG: A) 2-10VDC; or B) May be Externally Wired with a 500 Ohm Resistor
which is Supplied for 4-20mA, Zero & Span Adjustable
PULSE WIDTH MODULATION: Time Base of 0.1 - 5 Seconds/20mS Resolution or
0.1 - 25 Seconds/100mS Resolution Selected by Dip Switch Position
SWITCH HOT: Triac or Dry Contact, 40mA Max. Switching Current
SWITCH COMMON: NPN Transistor, SCR, Triac or Dry Contact 75mA Max. Switching Current
DIGITAL: 3 Wire 2 Position or 4 Wire 3 Point Floating
50 in.lb. (5.6 Nm) at Rated Voltage
Reversible, 15-30 Sec. or 90-110 Sec. / 0-50 in.lb. (0-5.6 Nm) Depending upon the Model
-22F to +122F (-30C to +50C)
In Digital (BTXX5): Potentiometer (5 Kohms)
In Multi Signal (BM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65, 80 or 60N: 50 in.lb. (5.6 Nm)
20-30 Seconds Closure Through 90, 0-50 in.lb. (0-5.6 Nm)
Models Ending in, 20, 80 or 20N: 2 Mechanical, Fixed at 10 & 80
1 Amp Resistive, 24VAC or 5 Amp Resistive, 250VAC Depending upon the Model
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
BT000
(BBT1000 A)
24VAC
30VDC
6VA 6VA N N 20 to 30 $ 149
BT005
(BBT1005 A)
24VAC
30VDC
6VA 6VA N N 20 to 30 N $ 194
BT020
(BBT1021 A)
24VAC
30VDC
6VA 6VA N N 20 to 30 N $ 210
BT060
(BBT1060 A)
24VAC
30VDC
15VA 6VA N N 20 to 30 N $ 278
BT065
(BBT1065 A)
24VAC
30VDC
15VA 6VA N N 20 to 30 N N $ 317
BT080
(BBT1080 A)
24VAC
30VDC
15VA 6VA N N 20 to 30 N N $ 339
BT400
(BBT24 A)
24VAC 3VA 3VA N 90 to 110 $ 165
BT405
(BBT24 AP)
24VAC 3VA 3VA N 90 to 110 N $ 210
BT420
(BBT24 AAX)
24VAC 3VA 3VA N 90 to 110 N $ 227
BM000
(BBM2000 A)
24VAC
30VDC
6VA 6VA N N N N N 20 to 30 N N N $ 244
BM020
(BBM2021 A)
24VAC
30VDC
6VA 6VA N N N N N 20 to 30 N N N N $ 306
BM060
(BBM2060 A)
24VAC
30VDC
BM080
(BBM2080 A)
24VAC
30VDC
15VA 6VA N N N N N 20 to 30 N N N N N $ 401
BM400
(BBM24 A)
24VAC 4VA 4VA N N N N N 90 to 100 N N N $ 255
BM420
(BBT24 AAX)
24VAC 4VA 4VA N N N N N 90 to 100 N N N N $ 317
BM000N
(BBM2000 NA)
24VAC
30VDC
15VA 15VA N N N N N 15 N N N $ 351
BM020N
(BBM2021 NA)
24VAC
30VDC
15VA 15VA N N N N N 15 N N N N $ 412
BM060N
(BBM2060 NA)
24VAC
30VDC
24VA 15VA N N N N N 15 N N N N $ 458
B Series (low voltage) Quick Select
Note: All actuators are powered by brush motors except those ending with the letter N
All numbers in parenthesis represent the old nomenclature and will be phased out by Dec. 31, 2008
B Series Actuator (line voltage)
or 3/8 inch square jack shaft or remotely mounted using an adaptor kit. All actuators are bi-
directional. Enerdrive actuators are also bi-directional under fail safe conditions. The stroke
may be limited to less than 90 mechanically in digital models and electronically in Multi Signal
models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
120VAC or 240VAC Depending upon the Model
Peak at Start-up: 8VA to 7 Watts at Line Voltage Depending upon the Model
Operating at Full Load: 5VA to 7 Watts at Line Voltage Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Digital (BT):
2 Wire or 3 Wire 2 Position and 3 Wire 3 Point Floating Depending upon the Model
Reversible, 20-30 Sec. / 0-50 in.lb. (0-5.6 Nm) Depending upon the Model
-22F to +122F (-30C to +50C)
In Digital (BTXX5): Potentiometer (5 Kohms)
Models Ending in 60 or 80: 50 in.lb. (5.6 Nm)
Models Ending in, 20 or 80: 2 Mechanical, Fixed at 10 & 80
B Series (line voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
BT100
(BBTHV1100 A)
120VAC 4 watts 4 watts N N 20 to 30 $ 170
BT105
(BBTHV1105 A)
120VAC 4 watts 4 watts N N 20 to 30 N $ 227
BT120
(BBTHV1121 A)
BT160
(BBTHV1160 A)
120VAC 8VA 5VA N 20 to 30 N $ 306
BT180
(BBTHV1180 A)
120VAC 8VA 5VA N 20 to 30 N N $ 368
BT200
(BBTHV1200 A)
240VAC 7 watts 7 watts N N 20 to 30 $ 170
BT205
(BBTHV1205 A)
BT220
(BBTHV1221 A)
BT260
(BBTHV1260 A)
240VAC 8VA 5VA N 20 to 30 N $ 306
BT280
(BBTHV1280 A)
240VAC 8VA 5VA N 20 to 30 N N $ 368
B Series Actuator (slow motion low voltage)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC, 24VDC or 48VDC Depending upon the Model
Operating at Full Load: 3VA to 6VA at 26VAC
18 AWG (0.8 mm
2
) Minimum
Digital (BT):
Analog (BM):
A) 2-10VDC; or B) 4-20mA
Reversible, 90 to 110 Sec. or 180 to 220 Sec. / 0-50 in.lb. (0-5.6 Nm) Depending upon the Model
-22F to +122F (-30C to +50C)
In Digital (BTXX5S): Potentiometer (5 Kohms)
Models Ending in 60S, 65S or 80S: 50 in.lb. (5.6 Nm)
Models Ending in 20S or 80S: 2 Mechanical, Fixed at 10 & 80
Visit us on the web at www.neptronic.com
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
BT000S
(BBTS1000)
24VAC
30VDC
6VA 6VA N N 90 to 110 $ 142
BT005S
(BBTS1005)
24VAC
30VDC
6VA 6VA N N 90 to 110 N $ 204
BT020S
(BBTS1021)
24VAC
30VDC
6VA 6VA N N 90 to 110 N $ 204
BT060S
(BBTS1060)
24VAC
30VDC
15VA 6VA N N 90 to 110 N $ 272
BT065S
(BBTS1065)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 328
BT080S
(BBTS1080)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 334
BT400S
(BBTS24 A)
24VAC 3VA 3VA N 180 to 220 $ 165
BT405S
(BBTS24 AP)
24VAC 3VA 3VA N 180 to 220 N $ 222
BT420S
(BBTS24 AAX)
24VAC 3VA 3VA N 180 to 220 N $ 227
BT800S
(BBTS1800)
48VDC 4 watts 4 watts N N 90 to 110 $ 188
BT805S 48VDC 4 watts 4 watts N N 90 to 110 N $ 244
BT820S 48VDC 4 watts 4 watts N N 90 to 110 N $ 250
BT860S
(BBTS1860)
48VDC 4 watts 4 watts N N 90 to 110 N $ 306
BT865S 48VDC 12 watts 4 watts N N 90 to 110 N N $ 362
BT880S 48VDC 12 watts 4 watts N N 90 to 110 N N $ 368
BM000S
(BBMS2000)
24VAC
30VDC
6VA 6VA N N 90 to 110 $ 194
BM020S
(BBMS2021)
24VAC
30VDC
6VA 6VA N N 90 to 110 N $ 255
BM060S
(BBMS2060)
24VAC
30VDC
15VA 6VA N N 90 to 110 N $ 317
BM080S
(BBMS2080)
24VAC
30VDC
15VA 6VA N N 90 to 110 N N $ 380
BM800S
(BBMS2800)
48VDC 6 watts 6 watts N N 90 to 110 $ 227
BM820S
(BBMS2821)
BM860S
(BBMS2860)
BM880S
(BBMS2880)
48VDC 20 watts 6 watts N N 90 to 110 N N $ 391
21
B Series (slow motion low voltage) Quick Select
B Series Actuator (slow motion line voltage)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
Peak at Start-up: 6VA to 20VA at Line Voltage Depending upon the Model
Operating at Full Load: 6VA at Line Voltage
18 AWG (0.8 mm
2
) Minimum
Digital (BT):
Analog (BM):
A) 2-10VDC; or B) 4-20mA
Reversible, 90 Sec. to 110 Sec. / 0-50 in.lb. (0-5.6 Nm)
-22F to +122F (-30C to +50C)
In Digital (BTXX5S): Potentiometer (5 Kohms)
Models Ending in 60S, 65S or 80S: 50 in.lb. (5.6 Nm)
B Series (slow motion line voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
BT100S 120VAC 6VA 6VA N N 90 to 110 $ 170
BT105S 120VAC 6VA 6VA N N 90 to 110 N $ 227
BT165S 120VAC 20VA 6VA N N 90 to 110 N N $ 362
BT200S 240VAC 6VA 6VA N N 90 to 110 $ 170
BM100S 120VAC 6VA 6VA N N 90 to 110 $ 250
BM160S 120VAC 20VA 6VA N N 90 to 110 N $ 351
BM200S 240VAC 6VA 6VA N N 90 to 110 $ 250
BM260S 240VAC 20VA 6VA N N 90 to 110 N $ 351
S Series Actuator (slow motion low voltage)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC
Operating at Full Load: 8VA at 26VAC
18 AWG (0.8 mm
2
) Minimum
Digital (ST):
Analog (SM):
A) 2-10VDC; or B) 4-20mA
Reversible, 90 to 110 Sec. / 0-70 in.lb. (0-8 Nm)
-22F to +122F (-30C to +50C)
In Digital (STXX5S): Potentiometer (5 Kohms)
Models Ending in 60S, 65S or 80S: 70 in.lb. (8 Nm)
20-30 Seconds Closure Through 90, 0-70 in.lb. (0-8 Nm)
S Series (low voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
ST000S
24VAC
30VDC
8VA 8VA N N 90 to 110 $ 160
ST005S
24VAC
30VDC
8VA 8VA N N 90 to 110 N $ 216
ST020S
24VAC
30VDC
8VA 8VA N N 90 to 110 N $ 222
ST060S
24VAC
30VDC
20VA 8VA N N 90 to 110 N $ 289
ST065S
24VAC
30VDC
20VA 8VA N N 90 to 110 N N $ 346
ST080S
24VAC
30VDC
20VA 8VA N N 90 to 110 N N $ 351
SM000S
24VAC
30VDC
8VA 8VA N N 90 to 110 $ 250
SM020S
24VAC
30VDC
8VA 8VA N N 90 to 110 N $ 312
SM060S
24VAC
30VDC
20VA 8VA N N 90 to 110 N $ 351
SM080S
24VAC
30VDC
20VA 8VA N N 90 to 110 N N $ 412
S Series Actuator (slow motion line voltage)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
Operating at Full Load: 8VA at Line Voltage
18 AWG (0.8 mm
2
) Minimum
Digital (ST):
Analog (SM):
A) 2-10VDC; or B) 4-20mA
Reversible, 90 to 110 Sec. / 0-70 in.lb. (0-8 Nm)
-22F to +122F (-30C to +50C)
In Digital (STXX5S): Potentiometer (5 Kohms)
Models Ending in 60S, 65S or 80S: 70 in.lb. (8 Nm)
20-30 Seconds Closure Through 90, 0-70 in.lb. (0-8 Nm)
S Series (line voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
ST100S 120VAC 8VA 8VA N N 90 to 110 $ 176
ST105S 120VAC 8VA 8VA N N 90 to 110 N $ 233
ST120S 120VAC 8VA 8VA N N 90 to 110 N
$ 238
ST165S 120VAC 20VA 8VA N N 90 to 110 N N $ 385
ST200S 240VAC 8VA 8VA N N 90 to 110 $ 176
SM100S 120VAC 8VA 8VA N N 90 to 110 $ 272
SM160S 120VAC 20VA 8VA N N 90 to 110 N $ 373
SM200S 240VAC 8VA 8VA N N 90 to 110 $ 272
SM260S 240VAC 20VA 8VA N N 90 to 110 N $ 373
L Series Actuator
N small size air handler dampers N 1/4 turn valves
N zone dampers
These quarter turn actuators may be directly coupled to either a 3/4 inch round or 5/8 inch square jack shaft or remotely mount-
ed using an adaptor kit. All actuators are bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions. The
stroke may be limited to less than 90 mechanically in digital models and electronically in Multi Signal models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC, 120VAC/240VAC or 24VAC/120VAC/240VAC Depending upon the Model
8VA to 35VA at Line Voltage Depending upon the Model
8VA to 10VA at Line Voltage Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Two 7/8 in. (22.2 mm) Knock Outs, Screw Terminals
Digital (LT):
2 Wire or 3 Wire 2 Position and/or 3 Wire or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (LM):
SWITCH 24VAC: Triac or Dry Contact, 40mA Max. Switching Current
Reversible, 60-85 Sec. / 0-140 in.lb. (0-16 Nm)
0F to +122F (-18C to +50C)
In Digital (LTXX5): Voltage (0 to 12VDC max)
In Multi Signal (LM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65 or 80: 140 in.lb. (16 Nm)
60-85 seconds closure through 90, 0-140 in.lb. (0-16 Nm)
Models Ending in 20 or 80: 2 Mechanical Switches, Fixed at 10 & 80
Option W: IP65 equivalent to Nema type 4 enclosure with special protection against chemicals
L Series Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
LT000
(LDT3000 A)
24VAC
30VDC
5VA 5VA N N 60 to 85 $ 222
LT005
(LDT3005 A)
24VAC
30VDC
5VA 5VA N N 60 to 85 N $ 278
LT020
(LDT3021 A)
24VAC
30VDC
5VA 5VA N N 60 to 85 N $ 283
LT060
(LDT3060 A)
24VAC
30VDC
30VA 5VA N N 60 to 85 N $ 419
LT065
(LDT3065 A)
24VAC
30VDC
30VA 5VA N N 60 to 85 N N $ 474
LT080
(LDT3080 A)
24VAC
30VDC
30VA 5VA N N 60 to 85 N N $ 480
LM000
(LDM4000 A)
24VAC
30VDC
8VA 8VA N N N N N 60 to 85 N N N $ 306
LM020
(LDM4021 A)
24VAC
30VDC
LM060
(LDM4060 A)
24VAC
30VDC
LM080
(LDM4080 A)
24VAC
30VDC
LT300
(LDTHV3300 A)
120VAC
240VAC
8VA 8VA N N 60 to 85 $ 283
LT305
(LDTHV3305 A)
120VAC
240VAC
8VA 8VA N N 60 to 85 N $ 339
LT320
(LDTHV3321 A)
120VAC
240VAC
8VA 8VA N N 60 to 85 N $ 346
LT360
(LDTHV3360 A)
120VAC
240VAC
35VA 8VA N N 60 to 85 N
$ 469
LT365
(LDTHV3365 A)
120VAC
240VAC
35VA 8VA N N 60 to 85 N N $ 525
LT380
(LDTHV3380 A)
120VAC
240VAC
35VA 8VA N N 60 to 85 N N $ 531
LM300
(LDMHV4300 A)
24VAC
30VDC
120VAC
240VAC
10VA 10VA N N N N N 60 to 85 N N N $ 357
LM320
(LDMHV4321 A)
24VAC
30VDC
120VAC
240VAC
LM360
(LDMHV4360 A)
24VAC
30VDC
120VAC
240VAC
LM380
(LDMHV4380 A)
24VAC
30VDC
120VAC
240VAC
T Series Actuator (low voltage)
N medium size air handler dampers N 1/4 turn valves
These quarter turn actuators may be directly coupled to either a 3/4 inch round or 5/8 inch square
jack shaft or remotely mounted using an adaptor kit. All actuators are bi-directional. Enerdrive actuators are also bi-directional
under fail safe conditions. The stroke may be limited to less than 90 mechanically in digital models and electronically in Multi
Signal models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC
18 AWG (0.8 mm
2
) Minimum
Digital (TT):
Multi Signal (TM):
Reversible, 40-50 Sec. or 60-85 Sec. / 0-180 in.lb. (0-20 Nm) Depending upon the Model
0F to +122F (-18C to +50C)
In Digital (TTXX5): Voltage (0 to 12VDC max)
In Multi Signal (TM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65, 80, 60N or 80N: 180 in.lb. (20 Nm)
60-85 seconds closure through 90, 0-180 in.lb. (0 - 20 Nm)
Models Ending in 20, 80, 20N, or 80N: 2 Mechanical Switches, Fixed at 10 & 80
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
TT000
(TBT3000 A)
24VAC
30VDC
8VA 8VA N N 60 to 85 $ 255
TT005
(TBT3005 A)
24VAC
30VDC
8VA 8VA N N 60 to 85 N $ 318
TT020
(TBT3021 A)
24VAC
30VDC
8VA 8VA N N 60 to 85 N $ 318
TT060
(TBT3060 A)
24VAC
30VDC
24VA 8VA N N 60 to 85 N $ 512
TT065
(TBT3065 A)
24VAC
30VDC
24VA 8VA N N 60 to 85 N N $ 575
TT080
(TBT3080 A)
24VAC
30VDC
24VA 8VA N N 60 to 85 N N $ 575
TM000
(TBM4000 A)
24VAC
30VDC
8VA 8VA N N N N N 60 to 85 N N N $ 358
TM020
(TBM4021 A)
24VAC
30VDC
TM060
(TBM4060 A)
24VAC
30VDC
TM080
(TBM4080 A)
24VAC
30VDC
TM000N
(TBM4000 NA)
24VAC
30VDC
15VA 15VA N N N N N 40 to 50 N N N $ 507
TM020N
(TBM4021 NA)
24VAC
30VDC
TM060N
(TBM4060 NA)
24VAC
30VDC
TM080N
(TBM4080 NA)
24VAC
30VDC
T Series (low voltage) Quick Select
T Series Actuator (line voltage)
N medium size air handler dampers N 1/4 turn valves
under fail safe conditions. The stroke may be limited to less than 90 mechanically in digital models and electronically in Multi
Signal models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
120VAC/240VAC or 24VAC/120VAC/240VAC Depending upon the Model
Operating at Full Load: 10VA to 20VA at Line Voltage Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Digital (TT):
2 Wire or 3 Wire 2 Position and/or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (TM):
0F to +122F (-18C to +50C)
In Digital (TTXX5): Voltage (0 to 12VDC max)
In Multi Signal (TM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65, 80 or 60N: 180 in.lb. (20 Nm)
60-85 seconds closure through 90, 0-180 in.lb. (0 - 20 Nm)
Models Ending in 20, 80 or 20N: 2 Mechanical Switches, Fixed at 10 & 80
T Series (line voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
TT300
(TBTHV3300 A)
120VAC
240VAC
10VA 10VA N N 60 to 85 $ 334
TT305
(TBTHV3305 A)
120VAC
240VAC
10VA 10VA N N 60 to 85 N $ 398
TT320
(TBTHV3321 A)
120VAC
240VAC
10VA 10VA N N 60 to 85 N
$ 398
TT360
(TBTHV3360 A)
120VAC
240VAC
30VA 10VA N N 60 to 85 N $ 570
TT365
(TBTHV3365 A)
120VAC
240VAC
30VA 10VA N N 60 to 85 N N $ 633
TT380
(TBTHV3380 A)
120VAC
240VAC
30VA 10VA N N 60 to 85 N N $ 633
TM300
(TBMHV4300 A)
24VAC
30VDC
120VAC
240VAC
10VA 10VA N N N N N 60 to 85 N N N $ 415
TM320
(TBMHV4321 A)
24VAC
30VDC
120VAC
240VAC
TM360
(TBMHV4360 A)
24VAC
30VDC
120VAC
240VAC
TM380
(TBMHV4380 A)
24VAC
30VDC
120VAC
240VAC
TM300N
(TBMHV4300 NA)
24VAC
30VDC
120VAC
240VAC
20VA 20VA N N N N N 40 to 50 N N N $ 650
TM320N
(TBMHV4321 NA)
24VAC
30VDC
120VAC
240VAC
TM360N
(TBMHV4360 NA)
24VAC
30VDC
120VAC
240VAC
R Series Actuator (low voltage)
N large size air handler dampers N 1/4 turn valves
under fail safe conditions. The stroke may be limited to less than 90 mechanically in di-gital models and electronically in Multi
Signal models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC
18 AWG (0.8 mm
2
) Minimum
Digital (RT):
Multi Signal (RM):
0F to +122F (-18C to +50C)
In Digital (RTXX5): Voltage (0 to 12VDC max)
In Multi Signal (RM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65, 80, 60N or 80N: 360 in.lb. (40 Nm)
Models Ending in 20, 80, 20N or 80N: 2 Mechanical Switches, Fixed at 10 & 80
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
RT000
(RBT5000 A)
24VAC
30VDC
10VA 10VA N N 60 to 85 $ 393
RT005
(RBT5005 A)
24VAC
30VDC
10VA 10VA N N 60 to 85 N $ 455
RT020
(RBT5021 A)
24VAC
30VDC
10VA 10VA N N 60 to 85 N $ 455
RT060
(RBT5060 A)
24VAC
30VDC
24VA 10VA N N 60 to 85 N $ 891
RT065
(RBT5065 A)
24VAC
30VDC
24VA 10VA N N 60 to 85 N N $ 948
RT080
(RBT5080 A)
24VAC
30VDC
24VA 10VA N N 60 to 85 N N $ 953
RM000
(RBM6000 A)
24VAC
30VDC
10VA 10VA N N N N N 60 to 85 N N N $ 460
RM020
(RBM6021 A)
24VAC
30VDC
RM060
(RBM6060 A)
24VAC
30VDC
RM080
(RBM6080 A)
24VAC
30VDC
30VA 10VA N N N N N 60 to 85 N N N N N $ 1,001
RM000N
(RBM6000 NA)
24VAC
30VDC
24VA 24VA N N N N N 40 to 50 N N N $ 582
RM020N
(RBM6021 NA)
24VAC
30VDC
RM060N
(RBM6060 NA)
24VAC
30VDC
40VA 24VA N N N N N 40 to 50 N N N N $ 1,017
RM080N
(RBM6080 NA)
24VAC
30VDC
R Series (low voltage) Quick Select
R Series Actuator (line voltage)
N large size air handler dampers N 1/4 turn valves
under fail safe conditions. The stroke may be limited to less than 90 mechanically in di-gital models and electronically in Multi
Signal models.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
120VAC/240VAC or 24VAC/120VAC/240VAC Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Digital (RT):
2 Wire or 3 Wire 2 Position and/or 4 Wire 3 Point Floating Depending upon the Model
Multi Signal (RM):
0F to +122F (-18C to +50C)
In Digital (RTXX5): Voltage (0 to 12VDC max)
In Multi Signal (RM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 65, 80 or 60N: 360 in.lb. (40 Nm)
Models Ending in 20, 80 or 20N: 2 Mechanical Switches, Fixed at 10 & 80
R Series (line voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
RT300
(RBTHV5300 A)
120VAC
240VAC
14VA 14VA N N 60 to 85 $ 450
RT305
(RBTHV5305 A)
120VAC
240VAC
14VA 14VA N N 60 to 85 N $ 507
RT320
(RBTHV5321 A)
120VAC
240VAC
14VA 14VA N N 60 to 85 N
$ 512
RT360
(RBTHV5360 A)
120VAC
240VAC
30VA 14VA N N 60 to 85 N $ 943
RT365
(RBTHV5365 A)
120VAC
240VAC
30VA 14VA N N 60 to 85 N N $ 1,007
RT380
(RBTHV5380 A)
120VAC
240VAC
30VA 14VA N N 60 to 85 N N $ 1,007
RM300
(RBMHV6300 A)
24VAC
30VDC
120VAC
240VAC
14VA 14VA N N N N N 60 to 85 N N N $ 535
RM320
(RBMHV6321 A)
24VAC
30VDC
120VAC
240VAC
RM360
(RBMHV6360 A)
24VAC
30VDC
120VAC
240VAC
RM380
(RBMHV6380 A)
24VAC
30VDC
120VAC
240VAC
RM300N
(RBMHV6300 NA)
24VAC
30VDC
120VAC
240VAC
30VA 30VA N N N N N 40 to 50 N N N $ 725
RM320N
(RBMHV6321 NA)
24VAC
30VDC
120VAC
240VAC
RM360N
(RBMHV6360 NA)
24VAC
30VDC
120VAC
240VAC
U & W Series Actuator (low voltage)
to
N fan vortex dampers N large damper sections N 1/4 turn valves
N inlet guide vanes
These microprocessor based, low voltage actuators are encased in a sturdy cast aluminum, weather tight enclosure. All actuators
are bi-directional. The actuators with the fail safe option are also bi-directional in the event of a power failure. The stroke may
be electronically limited to less than 110. Factory installed auxiliary switches, UBAUX2, and a remote mounting kit, UBARM &
ELUB, are available. Refer to Actuator Accessories.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque at Rated Voltage:
Fail Safe Rating:
Response Time Through 90:
Battery Type:
Battery Rating:
Auxiliary Switches:
24VAC/30VDC
18 AWG (0.8 mm
2
) Minimum
Three 7/8 in. (22.2 mm) Knock Outs, Screw Terminals
Digital (UT & WT):
4 Wire 2 Position or 5 Wire 3 Point Floating
Multi Signal (UM & WM):
1800 in.lb. (200 Nm) to 4000 in.lb. (450 Nm) Depending upon the Model
Reversible, 45 Seconds to 8 Minutes Depending upon the Model
0F to +122F (-18C to +50C)
On all Models: 4-20mA Output (May be wired for a 2-10VDC signal)
UT010, UT030, UM010 & UM030: 1800 in.lb. (200 Nm) & 2500 in.lb. (280 Nm)
WT010, WT030, WM010 & WM030: 3500 in.lb. (400 Nm) & 4000 in.lb. (450 Nm)
0 - 1800 in.lb. (0 - 200 Nm): 45 Sec., 0 - 2500 in.lb. (0 - 280 Nm): 4 Min.
0 - 3500 in.lb. (0 - 400 Nm): 90 Sec., 0 - 4000 in.lb. (0 - 450 Nm): 8 Min.
12 Volt Sealed Gel Type
800 mA
Cast Aluminum, IP56 equivalent to Nema type 4 enclosure
U & W Series (low voltage) Quick Select
Actuator
Models
Rotation
Time
Thru
90
0
Arc
Actuator Features
2 Mech.
Aux.
Switches
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
The
Fail Safe
Option
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
for applications requiring up to 1800 in.lb. (200 Nm.) torque at rated voltage
UT000
(UB8000 A)
24VAC
30VDC
100VA 100VA N N 45 Sec. N N $ 2,444
UT010
(UB8030 A)
24VAC
30VDC
100VA 100VA N N 45 Sec. N N N $ 3,080
UT020
(UB8000 A-AUX2)
24VAC
30VDC
100VA 100VA N N 45 Sec. N N N $ 2,701
UT030
(UB8030 A-AUX2)
24VAC
30VDC
100VA 100VA N N 45 Sec. N N N N $ 3,337
UM000
(UB8010 A)
24VAC
30VDC
40VA 40VA N N N N N 4 Min. N N N $ 2,444
UM010
(UB8040 A)
24VAC
30VDC
40VA 40VA N N N N N 4 Min. N N N N $ 3,080
UM020
(UB8010 A-AUX2)
24VAC
30VDC
UM030
(UB8040 A-AUX2)
24VAC
30VDC
40VA 40VA N N N N N 4 Min. N N N N N $ 3,337
WT000
(UB9000 A)
24VAC
30VDC
100VA 100VA N N 90 Sec. N N $ 3,086
WT010
(UB9030 A)
24VAC
30VDC
100VA 100VA N N 90 Sec. N N N $ 3,473
WT020
(UB9000 A-AUX2)
24VAC
30VDC
100VA 100VA N N 90 Sec. N N N $ 3,343
WT030
(UB9030 A-AUX2)
24VAC
30VDC
100VA 100VA N N 90 Sec. N N N N $ 3,729
WM000
(UB9010 A)
24VAC
30VDC
WM010
(UB9040 A)
24VAC
30VDC
WM020
(UB9010 A-AUX2)
24VAC
30VDC
WM030
(UB9040 A-AUX2)
24VAC
30VDC
U & W Series Actuator (line voltage)
to
N fan vortex dampers N large damper sections N 1/4 turn valves
N inlet guide vanes
These microprocessor based, low voltage actuators are encased in a sturdy cast aluminum, weather tight enclosure.All actuators
are bi-directional. The actuators with the fail safe option are also bi-directional in the event of a power failure. The stroke may
be electronically limited to less than 110. Factory installed auxiliary switches, UBAUX2, and a remote mounting kit, UBARM &
ELUB, are available. Refer to Actuator Accessories.
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Fail Safe Rating:
Response Time Through 90:
Battery Type:
Battery Rating:
Auxiliary Switches:
24VAC/120VAC/240VAC
Peak at Start-up: 40VA at Line Voltage Depending upon the Model
Operating at Full Load: 40VA at Line Voltage Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Three 7/8 in. (22.2 mm) Knock Outs, Screw Terminals
Multi Signal (UM & WM):
2500 in.lb. (280 Nm) to 4000 in.lb. (450 Nm) Depending upon the Model
Reversible, 4 Minutes to 8 Minutes Depending upon the Model
0F to +122F (-18C to +50C)
In Multi Signal: 4-20mA Output (May be wired for a 2-10VDC signal)
UM310 & UM330: 2500 in.lb. (280 Nm)
WM310 & WM330: 4000 in.lb. (450 Nm)
0 - 2500 in.lb. (0 - 280 Nm): 4 Min.
0 - 4000 in.lb. (0 - 450 Nm): 8 Min.
12 Volt Sealed Gel Type
800 mA
Cast Aluminum, IP56 equivalent to Nema type 4 enclosure
U & W Series (line voltage) Quick Select
Actuator
Models
Rotation
Time
Thru
90
0
Arc
Actuator Features
2 Mech.
Aux.
Switches
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
The
Fail Safe
Option
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
UM300
(UB8310 A)
24VAC
30VDC
120VAC
240VAC
40VA 40VA N N N N N 4 Min. N N N $2,571
UM310
(UB8340 A)
24VAC
30VDC
120VAC
240VAC
UM320
(UB8310 A-AUX2)
24VAC
30VDC
120VAC
240VAC
UM330
(UB8340 A-AUX2)
24VAC
30VDC
120VAC
240VAC
WM300
(UB9310 A)
24VAC
30VDC
120VAC
240VAC
WM310
(UB9340 A)
24VAC
30VDC
120VAC
240VAC
WM320
(UB9310 A-AUX2)
24VAC
30VDC
120VAC
240VAC
WM330
(UB9340 A-AUX2)
24VAC
30VDC
120VAC
240VAC
Finally a superior
alternative to the
pneumatic actuator.
Designed for critical

environments where
the speed of the
actuator is essential.

For accurate control of air movement in laboratories and clean rooms.
For precise fume hood control.
For water source heat pump valves that require fast opening and shut off.
For generator room dampers that require fast opening and shut off at
high torque.
Time 1.5 seconds! Rotation 0-90
0
Torque 25 in. lb. (2.8Nm)
Time 3.5 seconds! Rotation 0-90
0
Torque 35 in. lb. (4Nm)
Time 20 seconds! Rotation 0-90
0
Torque 240 in. lb. (27Nm)
Accepts digital, analog and PWM control signals with conditioned feedback.
Micro processor based with programmable auto stroke, zero & span.
Easy to install, direct mount to the damper shaft or remote mount.
Adaptable to the venturi linear flow air valves.
Fail Safe with Enerdrive.
Fast Actuators (25 to 50 in.lb. torque)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Auxiliary Switches:
24VAC/30VDC
18 AWG (0.8 mm
2
) Minimum
Two 7/8 in. (22.2mm) or One 5/8 in. (15.9mm) and One 7/8in. (22.2mm) Knock Outs, Screw Terminals
Digital (BT):
Multi Signal:
25 in.lb. (2.8 Nm) to 50 in.lb. (5.6 Nm) at Rated Voltage Depending upon the Model
Reversible, 1.5 to 8 Seconds Depending upon the Model
0F to +122F (-18C to +50C)
In Multi Signal (BM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 80 (F, FF, FN, FFN): 25 to 50 in.lb. (2.8 to 5.6Nm) Depending upon the Model
1.5 to 20 Seconds Closure Through 90, Depending upon the Model
Models Ending in 20 or 80 (F, FF, FN, FFN): 2 Mechanical Switches, Fixed at 10 & 80
Rotational speeds from 1.5 to 8 seconds
for applications up to 50 in.lb. (5.6 Nm)
N fume hood control N stairwell pressurization
N air handler dampers
These microprocessor based actuators are designed for critical
environments where the speed of the actuator is essential. All actuators
are bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions.
The stroke may be limited to less than 90 electronically.
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
25 in.lb. (2.8 Nm.) torque at rated voltage
BM000FF
(BBMFF2000 A)
24VAC
30VDC
15VA 15VA N N N N N 1.5 to 2.5 N N N $ 334
BM020FF
(BBMFF2021 A)
24VAC
30VDC
15VA 15VA N N N N N 1.5 to 2.5 N N N N $ 396
BM060FF
(BBMFF2060 A)
24VAC
30VDC
BM080FF
(BBMFF2080 A)
24VAC
30VDC
24VA 15VA N N N N N 1.5 to 2.5 N N N N N $ 498
35 in.lb. (4 Nm.) torque at rated voltage
BM000F
(BBMF2000 A)
24VAC
30VDC
15VA 15VA N N N N N 3.5 to 4.5 N N N $ 334
BM020F
(BBMF2021 A)
24VAC
30VDC
BM060F
(BBMF2060 A)
24VAC
30VDC
BM080F
(BBMF2080 A)
24VAC
30VDC
24VA 15VA N N N N N 3.5 to 4.5 N N N N N $ 498
BM000FFN
(BBMFF2000 NA)
24VAC
30VDC
24VA 24VA N N N N N 3 N N N $ 419
BM020FFN
(BBMFF2021 NA)
24VAC
30VDC
24VA 24VA N N N N N 3 N N N N $ 480
BM060FFN
(BBMFF2060 NA)
24VAC
30VDC
24VA 24VA N N N N N 3 N N N N $ 581
BT000F
(BBTF1000 A)
24VAC
30VDC
15VA 15VA N N 6 to 8 N $ 210
BT020F
(BBTF1021 A)
24VAC
30VDC
15VA 15VA N N 6 to 8 N N $ 295
BT060F
(BBTF1060 A)
24VAC
30VDC
24VA 15VA N N 6 to 8 N N $ 317
BT080F
(BBTF1080 A)
24VAC
30VDC
24VA 15VA N N 6 to 8 N N N $ 380
BM000FN
(BBMF2000 NA)
24VAC
30VDC
24VA 24VA N N N N N 6 N N N $ 419
BM020FN
(BBMF2021 NA)
24VAC
30VDC
24VA 24VA N N N N N 6 N N N N $ 480
BM060FN
(BBMF2060 NA)
24VAC
30VDC
24VA 24VA N N N N N 6 N N N N $ 581
Fast (25 to 50 in.lb. torque) Quick Select
Fast Actuators (120 to 240 in.lb. torque)
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Auxiliary Switches:
24VAC/30VDC
18 AWG (0.8 mm
2
) Minimum
Digital (TT & RT):
Multi Signal:
120 in.lb. (13.5 Nm) to 240 in.lb. (27 Nm) at Rated Voltage Depending upon the Model
Reversible, 15 to 30 Seconds Depending upon the Model
0F to +122F (-18C to +50C)
In Multi Signal (TM or RM): 4-20mA Output (May be wired for a 2-10VDC signal)
Models Ending in 60, 80 (F, FN): 120 to 240 in.lb. (13.5 to 27Nm) Depending upon the Model
15 to 20 Seconds Closure Through 90, Depending upon the Model
Models Ending in 20, 80 (F, FN): 2 Mechanical Switches, Fixed at 10 & 80
Rotational speeds from 15 to 30 seconds
for applications up to 240 in.lb. (27 Nm)
N fume hood control N stairwell pressurization
N air handler dampers
These microprocessor based actuators are designed for critical
environments where the speed of the actuator is essential. All actuators
are bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions.
The stroke may be limited to less than 90 electronically.
Fast (120 to 240 in.lb. torque) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
TT000F
(TBTF3000 A)
24VAC
30VDC
10VA 10VA N N 20 to 30 N $ 358
TT020F
(TBTF3021 A)
24VAC
30VDC
10VA 10VA N N 20 to 30 N N $ 420
TT060F
(TBTF3060 A)
24VAC
30VDC
24VA 10VA N N 20 to 30 N N $ 622
TT080F
(TBTF3080 A)
24VAC
30VDC
24VA 10VA N N 20 to 30 N N N $ 684
TM000FN
(TBMF4000 NA)
24VAC
30VDC
25VA 25VA N N N N N 15 to 20 N N N $ 570
TM020FN
(TBMF4021 NA)
24VAC
30VDC
TM060FN
(TBMF4060 NA)
24VAC
30VDC
TM080FN
(TBMF4080 NA)
24VAC
30VDC
TM300FN
(TBMFHV4300 NA)
24VAC
30VDC
120VAC
240VAC
30VA 30VA N N N N N 20 N N N $ 690
TM320FN
(TBMFHV4321 NA)
24VAC
30VDC
120VAC
240VAC
30VA 30VA N N N N N 20 N N N N $ 753
TM360FN
(TBMFHV4360 NA)
24VAC
30VDC
120VAC
240VAC
50VA 30VA N N N N N 20 N N N N $ 977
RT000F
(RBTF5000 A)
24VAC
30VDC
18VA 18VA N N 20 to 30 N $ 519
RT020F
(RBTF5021 A)
24VAC
30VDC
18VA 18VA N N 20 to 30 N N $ 582
RT060F
(RBTF5060 A)
24VAC
30VDC
40VA 18VA N N 20 to 30 N N $ 1,012
RT080F
(RBTF5080 A)
24VAC
30VDC
40VA 18VA N N 20 to 30 N N N $ 1,104
RM000FN
(RBMF6000 NA)
24VAC
30VDC
25VA 25VA N N N N N 15 to 20 N N N $ 662
RM020FN
(RBMF6021 NA)
24VAC
30VDC
RM060FN
(RBMF6060 NA)
24VAC
30VDC
RM080FN
(RBMF6080 NA)
24VAC
30VDC
RM300FN
(RBMFHV6300 NA)
24VAC
30VDC
120VAC
240VAC
30VA 30VA N N N N N 20 N N N $ 967
RM320FN
(RBMFHV6321 NA)
24VAC
30VDC
120VAC
240VAC
30VA 30VA N N N N N 20 N N N N $ 1,029
RM360FN
(RBMFHV6360 NA)
24VAC
30VDC
120VAC
240VAC
50VA 30VA N N N N N 20 N N N N $ 1,510
Smoke Damper Actuators
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Torque:
Auxiliary Switches:
Running Consumption: 15VA to 24VA Depending upon the Model
Holding Consumption: 5VA
18 AWG (0.8 mm
2
) Minimum
2 Wire 2 Position
35 in.lb. (4 Nm) to 90 in.lb. (11 Nm) at Rated Voltage Depending upon the Model
Reversible, 20-30 Seconds
0F to +122F (-18C to +50C)
* 250F (121C) for a limited time
35 to 90 in.lb. (4 to 11Nm) Depending upon the Model
15 Seconds Closure Through 90
Models Ending in 80X_ _: 2 Mechanical Switches
Switching Points: 5 & 85 +/-5
NEMA type 2 / IP42
N designed to operate reliably in smoke control systems at
250
0
F (121
0
C)
N 2 Position, with electronic fail safe
N 30 sec. open and close
These actuators are designed to operate reliably in smoke control systems requir-
ing Underwriters Laboratories Inc, UL 555S rated at 250
0
F. UL 555S listing is avail-
able when tested and assembled at the damper manufacturers factory.
Smoke Damper Actuators Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price Nom.
Supply
Consumption Digital
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches RUNNING HOLDING 2 POSITION
BT060X4
24VAC
24VDC
15VA 5VA N 20 to 30 N $ 289
BT080X4
24VAC
24VDC
15VA 5VA N 20 to 30 N N $ 351
BT160X4 120VAC 15VA 5VA N 20 to 30 N $ 334
BT180X4 120VAC 15VA 5VA N 20 to 30 N N $ 396
BT260X4 240VAC 15VA 5VA N 20 to 30 N $ 334
BT060X8
24VAC
24VDC
15VA 5VA N 20 to 30 N $ 362
BT080X8
24VAC
24VDC
15VA 5VA N 20 to 30 N N $ 424
BT160X8 120VAC 15VA 5VA N 20 to 30 N $ 396
BT260X8 240VAC 15VA 5VA N 20 to 30 N $ 396
LT060X11
24VAC
24VDC
24VA 5VA N 20 to 30 N $ 605
LT080X11
24VAC
24VDC
24VA 5VA N 20 to 30 N N
$ 666
LT160X11 120VAC 24VA 5VA N 20 to 30 N $ 649
LT180X11 120VAC 24VA 5VA N 20 to 30 N N $ 711
LT260X11 240VAC 24VA 5VA N 20 to 30 N $ 649
LT280X11 240VAC 24VA 5VA N 20 to 30 N N $ 711
IP65 / NEMA 4 Actuators (low voltage)
Power Supply:
Power Consumption:
Control Signals:
Torque:
Auxiliary Switches:
24VAC/30VDC
1 meter long 6 wire plenum cable, 18 AWG [0.8 mm2]
Analog: 2-10 VDC
0F to +122F (-18C to +50C)
60-85 Seconds Closure Through 90
Models Ending in 20W & 80W: 2 Mechanical Switches, Fixed at 10
0
& 80
0
IP65 equivalent to Nema type 4 enclosure with special protection against chemicals
N high humidity applications
N outdoor applications
N food industry
N animal husbandry
These quarter turn actuators have been designed with IP65 (equivalent to Nema
type 4) protection against water or chemicals such as ammonia. They are to be
installed in very demanding environmental conditions such as industrial food plants
or animal husbandry. All actuators may be directly coupled to either a 3/4 inch
round or 5/8 inch square jack shaft or remotely mounted using an adaptor kit. All
actuators are bi-directional. Enerdrive actuators are also bi-directional under fail
safe conditions.
IP65 / NEMA 4 Actuators (low voltage) Quick Select
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
LM000W
24VAC
30VDC
8VA 8VA N 60 to 85 N $ 416
LM020W
24VAC
30VDC
8VA 8VA N 60 to 85 N N $ 477
LM060W
24VAC
30VDC
30VA 8VA N 60 to 85 N N $ 578
LM080W
24VAC
30VDC
30VA 8VA N 60 to 85 N N N $ 641
TM000W
24VAC
30VDC
8VA 8VA N 60 to 85 N $ 469
TM020W
24VAC
30VDC
8VA 8VA N 60 to 85 N N
$ 531
TM060W
24VAC
30VDC
30VA 8VA N 60 to 85 N N $ 704
TM080W
24VAC
30VDC
30VA 8VA N 60 to 85 N N N $ 768
RM000W
24VAC
30VDC
10VA 10VA N 60 to 85 N $ 572
RM020W
24VAC
30VDC
10VA 10VA N 60 to 85 N N $ 635
RM060W
24VAC
30VDC
30VA 10VA N 60 to 85 N N $ 1,048
RM080W
24VAC
30VDC
30VA 10VA N 60 to 85 N N N $ 1,112
IP65 / NEMA 4 Actuators (line voltage)
Power Supply:
Power Consumption:
Control Signals:
Torque:
1 meter long 6 wire plenum cable, 18 AWG [0.8 mm2]
Analog: 2-10 VDC
0F to +122F (-18C to +50C)
60-85 Seconds Closure Through 90
IP65 equivalent to Nema type 4 enclosure with special protection against chemicals
N high humidity applications
N outdoor applications
N food industry
N animal husbandry
These quarter turn actuators have been designed with IP65 (equivalent to Nema
type 4) protection against water or chemicals such as ammonia. They are to be
installed in very demanding environmental conditions such as industrial food plants
or animal husbandry. All actuators may be directly coupled to either a 3/4 inch
round or 5/8 inch square jack shaft or remotely mounted using an adaptor kit. All
actuators are bi-directional. Enerdrive actuators are also bi-directional under fail
safe conditions.
Actuator
Models
Time in
Seconds
Thru
90
0
Arc
Actuator Features
List
Price
Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
(Enerdrive)
2 Mech.
Aux.
Switches
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
LM100W 120VAC 10VA 10VA N 60 to 85 N $ 466
LM160W 120VAC 30VA 10VA N 60 to 85 N N $ 629
LM200W 240VAC 10VA 10VA N 60 to 85 N $ 466
LM260W 240VAC 30VA 10VA N 60 to 85 N N $ 629
TM100W 120VAC 10VA 10VA N 60 to 85 N $ 526
TM160W 120VAC 30VA 10VA N 60 to 85 N N $ 831
TM200W 240VAC 10VA 10VA N 60 to 85 N $ 526
TM260W 240VAC 30VA 10VA N 60 to 85 N N $ 831
RM100W 120VAC 14VA 14VA N 60 to 85 N $ 646
RM160W 120VAC 30VA 14VA N 60 to 85 N N $ 1,101
RM200W 240VAC 14VA 14VA N 60 to 85 N $ 646
RM260W 240VAC 30VA 14VA N 60 to 85 N N $ 1,101
IP65 / NEMA 4 Actuators (line voltage) Quick Select
A & M Linear Actuators
100 lb. (450 N) & 1500 lb. (6750 N) force
Cazzaniga Controlli Johnson Controls
Honeywell Invensys Siemens
Robertshaw Tour & Anderson Danfoss
Power Supply:
Power Consumption:
Wire Size:
Control Signals:
Force:
Direction & Running Time:
Fail Safe Rating:
Response Time:
Auxiliary Switches:
24VAC/30VDC, 24VDC or 24VAC/120VAC/240VAC Depending upon the Model
18 AWG (0.8 mm
2
) Minimum
Digital (AT):
Multi Signal (AM & MM):
(A): 100 lb. (450 N) & (M): 1500 lb. (6750 N) at Rated Voltage
(A): Reversible, 60 Seconds or 90 to 100 Sec. Depending upon the Model
(M): Reversible, 2 to 7 minutes. Depending upon stroke, Force independent
0F to +122F (-18C to +50C)
In Digital (ATXX5): Potentiometer (5 Kohms)
In Multi Signal (AM & M): 4-20mA Output (May be wired for a 2-10VDC signal)
(A) Models Ending in 60 & 80: 100 lb. (450 N), (M) Models Ending in 10: 1500 lb. (6750 N)
(A): 0-100 lb. (0-450N): 60 Seconds for Full Stroke
(M): 0-1500 lb. (0-6750N): 7 Minutes for Full Stroke
N Used with Neptronic supplied Globe Valves
N Retrofit for most popular Globe Valves
A & M Linear Actuators Quick Select
Note: All numbers in parenthesis represent the old nomenclature and will be phased out by Dec. 31, 2008.
The last three characters of the nomenclature (05-S) designate an Invensys globe valve linkage. If you
need an actuator for a different globe valve, please call the factory for accurate nomenclature, price and
delivery.
Actuator
Models
Full
Stroke
Time in
Seconds
Actuator Features
2 Mech.
Aux.
Switches
List
Price Nom.
Supply
Feed
Back
Auto
Stroke
Zero
&
Span
Fail Safe
Start
Up
Full
Load
2
POS
3 PT
FLT
2-10
VDC
4-20
mA
PWM
low voltage 100 lb. (450 N) force
AT000
(AQT1000A-05-S)
24VAC
30VDC
6VA 6VA N N 60 $ 204
AT005
(AQT1005A-05-S)
24VAC
30VDC
6VA 6VA N N 60 N $ 261
AT020
(AQT1021A-05-S)
24VAC
30VDC
6VA 6VA N N 60 N $ 278
AT060
(AQT1060A-05-S)
24VAC
30VDC
20VA 6VA N N 60 N $ 334
AT065
(AQT1065A-05-S)
24VAC
30VDC
20VA 6VA N N 60 N N $ 391
AT080
(AQT1080A-05-S)
24VAC
30VDC
20VA 6VA N N 60 N N $ 401
AM000
(AQM2000A-05-S)
24VAC
30VDC
6VA 6VA N N N N N 60 N N N $ 351
AM060
(AQM2060A-05-S)
24VAC
30VDC
20VA 6VA N N N N N 60 N N N N $ 452
AM400
(AQM24A-05-S)
24VAC 4VA 4VA N N N N N 90 to 100 N N N $ 373
for applications requiring up to 1500 lb. (6750 N) force at rated voltage
MM000
(MTM910AV)
24VAC
30VDC
40VA 40VA N N N N N 2 to 7 Min N N N $ 3,012
MM010
(MTM940AV)
24VAC
30VDC
40VA 40VA N N N N N 2 to 7 Min N N N N $ 3,283
MM300
24VAC
30VDC
120VAC
240VAC
40VA 40VA N N N N N 2 to 7 Min N N N $ 3,165
MM310
24VAC
30VDC
120VAC
240VAC
40VA 40VA N N N N N 2 to 7 Min N N N N $ 3,407
SLD
Mechanical Stroke Limiting Device for L, T & R Damper Actuators
Description
The SLD or Stroke Limiting Device is an ancil-
lary component that is added to the universal
clamp assembly of any of either the L, T or R
damper actuator models. It mechanically adjusts
the stroke within the 90
0
arc.
Application
Two instances where an SLD can be used.
1. For a damper with a stroke of less than 90
0
without mechanical end stops.
2. To maintain minimum air flow in the duct; for
example, to prevent the damper from closing
below 10
0
minimum position.
Installation
The SLD should be added prior to installation.
However, if the actuator is already installed,
remove the power supply and the control signal
prior to taking the actuator off the damper.
Remove the cover from the actuator. Depress
the clutch which is located on the PC board and
simultaneously rotate the universal clamp
assembly (UCA) until its end stop. The UCA
indicator should be at the zero positon.
Temporarily replace the cover to protect the
electronics and invert the actuator. Carefully
remove the retaining clip that holds the UCA in
place.
With the actuator again in the upright position
remove the two 10 mm nuts on the U clamp.
Slide the stroke limiting device (SLD) onto the
clamp and replace the nuts so that the SLD is
held loosely in place.
Figure: The Stroke Limiting Device
complete with Stopper
Extract the UCA from the actuator and re-insert it so
that the indicator is now in any location between 0
O
and 90
O
depending on the rotation arc you
require.
Example: Putting the UCA indicator at the 20
O
mark will result in a rotation of 70
O
. Note that the
SLD butts against the actuator housing to
mechanicaly limit the stroke. Reinserting the
UCA indicator at the 80
O
mark will give a stroke
of 10
O
and so forth.
After selecting your stroke invert the actuator and
reattach the clip ring.
Manually position the damper blades at the physical
end stop such that the start position on the damper
and the actuator coincide.
Slide the actuator onto the jack shaft through the
aperture in the UCA.
SLD Schematics & Installation
Installation continued
Attach the motor bracket, which is provided,
to the duct work such that the stop rotational
pin sits loosely in the slot that is located on the
base plate beneath the EMT ports. This
provides for some lateral movement without
allowing the actuator to rotate about the shaft.
The motor bracket may be bent for offsetting
where the duct work is coated in insulation.
Tighten the bolts on the UCA.
With the cover off, the terminal block is easily
accessible and the actuator may now be wired
according to the diagram that corresponds to
the actuator model and mode of control as
described in the electrical instruction section.
For actuators with auxiliary switches, verify
that the contacts coincide with the rotational
direction required. Replace the cover and
secure.
Do not clutch motor when power is on.
Always remove power first. Then clutch
and turn damper or valve.
Figure: This diagram illustrates
the correct sequence for attaching
the SLD and Stopper.
NEVER SCREW OR BOLT DOWN
THE END OF THE MOTOR DIRECTLY
TO THE DUCT WORK! NEVER DRILL
INTO THE MOTOR CASING!
UCA Position
Indicator
Stopper required only when
actuator is remote mounted
with a crank arm.
Actuator Dimensions
Figure i C, D, B & S Actuators
Figure ii L, T & R Actuators
Actuator Installation
This drawing illustrates the correct placement
of the actuator on the dampers jack shaft.
Neptronic damper actuators are designed for direct
mounting to the damper jack shaft. They may be
mounted in any plane.
Slide the actuator onto the jack shaft through the
aperture in the universal clamp assembly. Attach the
motor bracket, which is provided, to the duct work
such that the stop rotational pin sits loosely in the
slot that is located on the base plate beneath the
EMT ports. This provides for some lateral movement
without allowing the motor to rotate about the shaft.
The motor bracket may be bent for offsetting where
the duct work is coated in insulation.
Loosen the retaining screw securing the motor cover
to the casing and remove the cover. Simultaneously
depress the motor clutch and rotate the universal
clamp assembly so that the start position of the
motor and the damper coincide. Release the clutch
and tighten the bolts on the universal clamp.
Replace the cover and secure.
Never screw or bolt down the end of the motor
directly to the duct work! Never drill into the
motor casing!
Accessories such as the Assembly for Remote
Mounting (ARM) and Standoff Bracket (ELBB,
ELTR) are available for those circumstances
where direct mounting is not feasible. Refer to
page 63 for a complete list.
Factory Settings for Multi Signal Actuators
Control Signal 2 - 10VDC
Feedback 4 - 20mA
Stroke 90
0
Rotational Direction 0
0
to 90
0
- Clockwise
The Enerdrive System Fail to the 0
0
Position
Dim.
C, D, B & S
Actuators
L & T
Actuators
R Actuators
INCHES
CENTI-
METERS
INCHES
CENTI-
METERS
INCHES
CENTI-
METERS
A 1.50 3.81 1.33 3.38 1.33 3.38
B 3.26 8.28 5.20 13.21 5.20 13.21
C 6.60 16.75 9.13 23.19 9.13 23.19
D 3.01 7.64 3.39 8.61 3.55 9.02
Actuator Accessories
DCA38, DCA50
Damper Crank Arm accepts up to
3/8 or 1/2 jack shaft depending
upon the model.
MCABB & MCATR
Motor Crank Arm for C/D/B/S or
L/T/R actuators.
SLD
Stroke Limiting Device is a
mechanical limiting bracket
for L, T or R actuators.
RSA
Ruskin Shaft Adapter for direct
mounting of an L, T or R actuator
on the 1 inch hollow Ruskin jack
shaft.
ELBB, ELTR & ELUB
L Standoff Bracket for C/D/B/S
or L/T/R or U/W.
BJ516 & BJ38
Ball Joint for 5/16 or 3/8 rod
depending upon the model.
MINI & MAXI HANDLES
Universal Clamp Assembly Handle
for C/D/B/S or L/T/R actuators
depending upon the model.
ARM24BB & ARM36BB
Assembly for Remote Mounting for
C,D,B & S actuators only. Contains
2 ball joints, 1 motor crank arm, 24
or 36 length 5/16 rod depending
upon the model, set nut & bolts.
ARM24TR & ARM36TR
Assembly for Remote Mounting
for L, T or R actuators only.
Contains 2 ball joints, 1 motor
crank arm, 24 or 36 length 3/8
rod depending upon the model,
set nut & bolts.
UBARM
Assembly for Remote Mounting of U & W actuator
only. Contains 2 ball joints, 1 crank arm, 36 length
1/2 SS rod, set nuts & bolts.
RH1 & RH2
Rain Hood protective enclosure for C/D/B/S or
L/T/R actuators depending upon the model.
Enerdrive Explained
Description
The Enerdrive System, The Electronic Spring is a
patented method of operating a damper or valve actuator
during a power outage at full rated torque in a clockwise or
counterclockwise direction such that the controlled device
arrives at a fully closed or fully open position where it
remains indefinitely or until the mains power is restored.
It is comprised of an elec-
tronic circuit which is inte-
gral to the actuators PC
board and super capacitors.
It is the energy generated
and stored in the super ca-
pacitor that is used by the
circuit to drive the actuator.
Having a controlled device
return to a specific, or fail
safe, position is required by industries or HVAC systems
to prevent harm or damage to equipment, products, live-
stock and people due to environmental factors. The con-
trolled device may be a damper, VAV box, fume hood or
valve.
This is the primary function of the Enerdrive System.
However, in 2 wire/2 position installations, it is used to
power the actuator in opposition to the control signal
direction when control is broken. The graph in Figure i
illustrates the rapidity and constancy of the Enerdrive
System for virtually unlimited cycling of the actuator as
frequently or infrequently as required.
Fig. ii The Effect of Temperature on Charge Time of the Enerdrive
System for the Maximum Load of 50 in.lb. at 77F/25C
Fig. i The Cyclic Characteristics of the Enerdrive System for the
Maximum Load of 50 in.lb. at 77F/25C.
Application
U.S. Patent #5,278,454
Description
Description
During installation, the field technician calibrates the
actuator using the dip switch to respond according to the
application requirements. When power is initially applied,
the actuator is engaged, driving in the chosen direction
and the Enerdrive System is activated absorbing
charge. The system is fully operational within 90 seconds
at 77F or 25C. ( Fig. ii). There is no delay in the actuator's
response.
The motor operates normally under control signal until
power is interrupted. This interruption activates the
Enerdrive System which supplies the actuator with suf-
ficient power to maintain its full rated torque as the motor
drives the controlled device to its fail safe position. With
the restoration of power, the actuator immediately
resumes its function under control signal input and the
Enerdrive System is recharged.
N state of the art electronics
N full torque response
N 100% operational with restoration of power
N fail position selected by dip switch
N emergency override by manual clutch
N in models from 18 in. lb. to 360 in. lb. torque
N in low and line voltage models
N inherent characteristics allow long operational life
N super capacitors are environmentally safe
N no mechanical parts
N no mechanical failures
The standard
actuator model B,
above, with the
Enerdrive System is
rated at a minimum
of 50 in.lb. torque.
List of Models
Old no. New no.
AQM2000A AM000
AQM2060A AM060
AQM24A AM400
AQT1000A AT000
AQT1005A AT005
AQT1021A AT020
AQT1060A AT060
AQT1065A AT065
AQT1080A AT080
BBM2000A BM000
BBM2000NA BM000N
BBM2021A BM020
BBM2021NA BM020N
BBM2060A BM060
BBM2060NA BM060N
BBM2080A BM080
BBM24A BM400
BBM24AAX BM420
BBMF2000A BM000F
BBMF2000N BM000FN
BBMF2021A BM020F
BBMF2021N BM020FN
BBMF2060A BM060F
BBMF2060N BM060FN
BBMF2080A BM080F
BBMFF2000A BM000FF
BBMFF2000NA BM000FFN
BBMFF2021A BM020FF
BBMFF2060A BM060FF
BBMFF2080A BM080FF
BBMS2000 BM000S
BBMS2021 BM020S
BBMS2060 BM060S
BBMS2080 BM080S
BBMS2800 BM800S
BBMS2821 BM820S
BBMS2860 BM860S
BBMS2880 BM880S
BBT1000A BT000
BBT1005A BT005
BBT1021A BT020
BBT1060A BT060
BBT1065A BT065
BBT1080A BT080
BBT24A BT400
BBT24AAX BT420
BBT24AP BT405
Old no. New no.
BBTF1000A BT000F
BBTF1021A BT020F
BBTF1060A BT060F
BBTF1080A BT080F
BBTHV1100A BT100
BBTHV1105A BT105
BBTHV1121A BT120
BBTHV1160A BT160
BBTHV1180A BT180
BBTHV1200A BT200
BBTHV1205A BT205
BBTHV1221A BT220
BBTHV1260A BT260
BBTHV1280A BT280
BBTS1000 BT000S
BBTS1005 BT005S
BBTS1021 BT020S
BBTS1060 BT060S
BBTS1065 BT065S
BBTS1080 BT080S
BBTS1800 BT800S
BBTS1860 BT860S
BBTS24A BT400S
BBTS24AAX BT420S
BBTS24AP BT405S
LDM4000A LM000
LDM4021A LM020
LDM4060A LM060
LDM4080A LM080
LDMHV4300A LM300
LDMHV4321A LM320
LDMHV4360A LM360
LDMHV4380A LM380
LDT3000A LT000
LDT3005A LT005
LDT3021A LT020
LDT3060A LT060
LDT3065A LT065
LDT3080A LT080
LDTHV3300A LT300
LDTHV3305A LT305
LDTHV3321A LT320
LDTHV3360A LT360
LDTHV3365A LT365
LDTHV3380A LT380
MDMS2060 DM060S
MDMS2080 DM080S
MDTS1060 DT060S
MDTS1065 DT065S
MDTS1080 DT080S
Old no. New no.
MTM910AV MM000
MTM940AV MM010
RBM6000A RM000
RBM6000NA RM000N
RBM6021A RM020
RBM6021NA RM020N
RBM6060A RM060
RBM6060NA RM060N
RBM6080A RM080
RBM6080NA RM080N
RBMF6000NA RM000FN
RBMF6021NA RM020FN
RBMF6060NA RM060FN
RBMF6080NA RM080FN
RBMFHV6300NA RM300FN
RBMHV6300A RM300
RBMHV6300NA RM300N
RBMHV6321A RM320
RBMHV6321NA RM320N
RBMHV6360A RM360
RBMHV6360NA RM360N
RBMHV6380A RM380
RBT5000A RT000
RBT5005A RT005
RBT5021A RT020
RBT5060A RT060
RBT5065A RT065
RBT5080A RT080
RBTF5000A RT000F
RBTF5021A RT020F
RBTF5060A RT060F
RBTF5080A RT080F
RBTHV5300A RT300
RBTHV5305A RT305
RBTHV5321A RT320
RBTHV5360A RT360
RBTHV5365A RT365
RBTHV5380A RT380
TBM4000A TM000
TBM4000NA TM000N
TBM4021A TM020
TBM4021NA TM020N
TBM4060A TM060
TBM4060NA TM060N
TBM4080A TM080
TBM4080NA TM080N
TBMF4000NA TM000FN
TBMF4021NA TM020FN
TBMF4060NA TM060FN
Old no. New no.
TBMF4080NA TM080FN
TBMFHV4300NA TM300FN
TBMHV4300A TM300
TBMHV4300NA TM300N
TBMHV4321A TM320
TBMHV4321NA TM320N
TBMHV4360A TM360
TBMHV4360NA TM360N
TBMHV4380A TM380
TBT3000A TT000
TBT3005A TT005
TBT3021A TT020
TBT3060A TT060
TBT3065A TT065
TBT3080A TT080
TBTF3000A TT000F
TBTF3021A TT020F
TBTF3060A TT060F
TBTF3080A TT080F
TBTHV3300A TT300
TBTHV3305A TT305
TBTHV3321A TT320
TBTHV3360A TT360
TBTHV3365A TT365
TBTHV3380A TT380
UB8000A UT000
UB8000A-AUX2 UT020
UB8010A UM000
UB8010A-AUX2 UM020
UB8030A UT010
UB8030A-AUX2 UT030
UB8040A UM010
UB8040A-AUX2 UM030
UB8310A UM300
UB8310A-AUX2 UM320
UB8340A UM310
UB8340A-AUX2 UM330
UB9000A WT000
UB9000A-AUX2 WT020
UB9010A WM000
UB9010A-AUX2 WM020
UB9030A WT010
UB9030A-AUX2 WT030
UB9040A WM010
UB9040A-AUX2 WM030
UB9310A WM300
UB9310A-AUX2 WM320
UB9340A WM310
UB9340A-AUX2 WM330
Cross Reference
Use this at-a-glance cross reference guide to select the Neptronic actuator that directly or most closely replaces
models by other manufacturers. Although only low voltage motors without peripherals have been listed to simplify the
table, it amply demonstrates Neptronics versatility in torque range for both digital and analog actuators either fail
safe or non-fail safe.
MANUFACTURER BELIMO JOHNSON INVENSYS SIEMENS HONEYWELL NEPTRONIC
for torque <20 in. lb.
Torque 18 in. lb. 18 in. lb.
Digital & Fail Safe TF24 CT060S
Analog & Fail Safe TF24-SR CM060S
Torque 35 in. lb. 35 in. lb. 25 in. lb. 35 in. lb.
Digital & Fail Safe LF24 MX40-7043 ML8175C DT060S
Analog & Fail Safe LF24-SR MS40-7043 DM060S
Torque 35 in. lb. 53 in. lb. 35 in. lb. 35 in. lb. 44 in. lb. 35/44 in. lb. 50 in. lb.
Digital LMX24-3 M9106-AGA M9104-IGA MF40-6043 GDE131 ML6161 BT000S
Digital & Fail Safe M9206-AGA BT060S
Analog LMB24-SR M9106-GGA MS40-6043 GDE161 ML7161 BM000S
Analog & Fail Safe M9206-GGA MS7505 BM060S
Torque 60/70 in. lb. 70 in. lb. 60/70 in. lb. 62/88 in. lb. 70/88 in. lb. 70 in. lb.
Digital NMB24-3 M9108-AGA MF40-6083 GLB131.IP ML6174 ST000S
Digital & Fail Safe NF24 MX40-7073 GMA131 MS8110 ST060S
Analog NMB24-SR M9108-GGA MS40-6083 GLB161.IP ML7174 SM000S
Analog & Fail Safe NF24-SR MS40-7073 GMA161 SM060S
Torque 133 in. lb. 140 in. lb. 133 in. lb. 132/142 in. lb. 142/150 in. lb. 140 in. lb.
Digital M9116-AGA MF40-6153 GEB131.1U ML6184 LT000
Digital & Fail Safe AF24 M9216-AGA MX40-7153 GCA121 ML8195 LT060
Analog M9116-GGA MS40-6153 GEB161.1U ML7284 LM000
Analog & Fail Safe AF24-SR M9216-GGA MS40-7153 GCA161 ML7295 LM060
Torque 160 in. lb. 150 in. lb. 177 in. lb. 175 in. lb. 180 in. lb.
Digital AMB24-3 GBB171 MN6120 TT000
Digital & Fail Safe MX40-7173 MS8120 TT060
Analog AMB24-SR GBB163 MN7220 TM000
Analog & Fail Safe MS40-7173 MS7520 TM060
Torque 266 in. lb. 210 in. lb. 280 in. lb. 300 in. lb. 310 in. lb. 310 in. lb. 360 in. lb.
Digital GMB24-3 M9124-AGA M9132-AGA MF40-6343 GIB171 ML6194 RT000
Digital & Fail Safe RT060
Analog GMB24-SR M9124-GGA M9132-GGA MS40-6343 GIB161 ML7294 RM000
Analog & Fail Safe RM060
66 Visit us on the web at www.neptronic.com
NOTES

Actuator Catalog

Uploaded by

Copyright:

Available Formats

Actuator Catalog

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Actuator Catalog

Uploaded by

Copyright:

Available Formats

More than a quarter of a centurys

manufacturing experience has gone into

240VAC 240VAC 240VAC 240VAC

Visit us on the web at www.neptronic.com 12

Designed for critical

Visit us on the web at www.neptronic.com 43

You might also like