Cpplus - Unc - Unp - HTTP - Api - For - Ipc-V1 37 PDF

CPPLUS UNC/UNP HTTP API FOR IPC
Version 1.37
CP Plus GmbH & Co. KG.

1
Document History
No
Release Notes
Date
Version
Author
draft
2007-1-18
1.10
Haifeng Wang
Add alarm push and version description
2012-8-18
1.20
Weijun Li
Add ptz control description
2012-9-11
1.21
Weijun Li
Remove 11 GUI and 12 Display
2012-9-29
1.22
Wei Chen
Add Playback,download file in rtsp description in chapter 2012-9-29
1.22
Wei Chen
2012-10-17
1.23
Wei Chen
Add firmware version description in chapter 1.Add motion 2012-10-29
1.24
Wei Chen
2012-11-12
1.25
WeiChen
4.1.5,4.1.6 and monitor and playback in http in chapter 4.1.7

and 4.1.8.
6
7
Add vendor description in chapter 9.8.8
data description in chapter 6.9.

Add AlarmLocal description in chapter 6.9.
Add BitRateControl description in 4.4.4.
Add adjust focus description in chapter 13.
2013-1-14
1.26
WeiChen
10
Add RTSP port description in chapter 5.10.
2013-1-18
1.27
WeiChen
11
Add VideoInOptions descrition in chapter 4.3.
2013-1-19
1.28
WeiChen
12
Modify description in chapter 13.4
2013-5-9
1.29
WeiChen
1.30
WeiChen
2013-10-26
1.31
WeiChen
Add snap as mainformat or extra format description in 2013-10-26
1.32
WeiChen
1.33
WeiChen
13
14
15
16
Add detail description in chapter 13.Add flash light 2013-6-20

description in chapter 4.11
Modify motion detect description in chapter 6.3.
chapter 8.3.
Add holiday description in chapter 8.4 and chater 8.1 and 2013-10-26
8.2.
17
Add software version description.
2013-11-10
1.34
WeiChen
18
Delete Alarm Server description.
2013-11-14
1.35
WeiChen
19
Add SD Camera descpition in chapter 14.
2013-11-15
1.36
WeiChen
Add custom title description in chapter 4.9.Modify SD 2013-12-17
1.37
WeiChen
20
camera range description in chapter 14. Add Login Failure

Alarm description in chapter 6.6 and 9.1.

2
1.Preface
This document details the API of CPPLUS video products. Programmers can access and configure CPPLUS video products follows the API.
This document with version 1.10 is available with firmware version 2.0 and above. This document with version 1.20, 1.21, 1.22, 1.23,
1.24,1,25,1,26,1,27,1,28 is available with firmware 2.210 and above.This document with version 1. 29 , 1.30, 1.31, 1.32, 1.33, 1.34, 1.35,
1.36 is available with firmware 2.210 and above.This document with version 1.37 is available with firmware 2.212, 2.4 and above.
2.Catalog
Document History ......................................................................................................................................................................................................2
1.Preface ....................................................................................................................................................................................................................3
2.Catalog ....................................................................................................................................................................................................................3
3.HTTP API Transaction ..............................................................................................................................................................................................9
3.1Transaction ...................................................................................................................................................................................................9
3.2Authentication ............................................................................................................................................................................................10
4.Camera..................................................................................................................................................................................................................10
4.1Stream ........................................................................................................................................................................................................10
4.1.1 GetStream .......................................................................................................................................................................................10
4.1.2 GetMaxExtraStreamCounts .............................................................................................................................................................11
4.1.3 GetSnapshot ...................................................................................................................................................................................11
4.1.4 GetVideo .........................................................................................................................................................................................11
4.1.5 PlayBack ..........................................................................................................................................................................................12
4.1.6 LoadFile...........................................................................................................................................................................................12
4.1.7 GetStream By Http ..........................................................................................................................................................................12
4.1.8 Playback By Http .............................................................................................................................................................................12
4.2VideoColor ..................................................................................................................................................................................................13
4.2.1 GetVideoColorConfig ......................................................................................................................................................................13
4.2.2 SetVideoColorConfig .......................................................................................................................................................................14
4.3VideoInOptions ...........................................................................................................................................................................................14
4.3.1 GetVideoInputCaps .........................................................................................................................................................................14
4.3.2 GetVideoInOptionsConfig ...............................................................................................................................................................16
4.3.3 SetVideoInOptionsConfig ................................................................................................................................................................19
4.4VideoEncode...............................................................................................................................................................................................23
4.4.1 GetVideoConfigCaps .......................................................................................................................................................................23
4.4.2 Resolution .......................................................................................................................................................................................24
4.4.3 GetVideoEncodeConfig ...................................................................................................................................................................25
4.4.4 SetVideoEncodeConfig ...................................................................................................................................................................25
4.5AudioEncode ............................................................................................................................................................................................... 27
4.5.1 GetAudioConfigCaps ....................................................................................................................................................................... 27
4.5.2 GetAudioEncodeConfig ................................................................................................................................................................... 27

3
4.5.3 SetAudioEncodeConfig....................................................................................................................................................................28
4.6 SnapEncode ...............................................................................................................................................................................................29
4.6.1 GetSnapConfigCaps .........................................................................................................................................................................29
4.6.2 GetSnapEncodeConfig ....................................................................................................................................................................29
4.6.3 SetSnapEncodeConfig .....................................................................................................................................................................30
4.7ChannelTitle ...............................................................................................................................................................................................31
4.7.1 GetChannelTitleConfig ....................................................................................................................................................................31
4.7.2 SetChannelTitleConfig ....................................................................................................................................................................31
4.8VideoStandard ............................................................................................................................................................................................31
4.8.1 GetVideoStandardConfig ................................................................................................................................................................31
4.8.2 SetVideoStandardConfig .................................................................................................................................................................31
4.9VideoWidget...............................................................................................................................................................................................32
4.9.1 GetVideoWidgetConfig ...................................................................................................................................................................32
4.9.2 SetVideoWidgetConfig ...................................................................................................................................................................33
4.10VideoOut ..................................................................................................................................................................................................35
4.10.1 GetVideoOutConfig.......................................................................................................................................................................35
4.10.2 SetVideoOutConfig .......................................................................................................................................................................35
4.11FlashLight ..................................................................................................................................................................................................36
4.11.1 GetFlashLightConfig ......................................................................................................................................................................36
4.11.2 SetFlashLightConfig .......................................................................................................................................................................36
5.NetWork ............................................................................................................................................................................................................... 37
5.1NetInterfaces .............................................................................................................................................................................................. 37
5.1.1 GetInterfaces................................................................................................................................................................................... 37
5.2BasicConfig.................................................................................................................................................................................................. 37
5.2.1 GetBasicConfig ................................................................................................................................................................................ 37
5.2.2 SetBasicConfig .................................................................................................................................................................................38
5.3PPPoE ..........................................................................................................................................................................................................39
5.3.1 GetPPPoEConfig ..............................................................................................................................................................................39
5.3.2 SetPPPoEConfig ...............................................................................................................................................................................39
5.4DDNS ...........................................................................................................................................................................................................39
5.4.1 GetDDNSConfig ...............................................................................................................................................................................39
5.4.2 SetDDNSConfig................................................................................................................................................................................40
5.5Email ...........................................................................................................................................................................................................40
5.5.1 GetEmailConfig ...............................................................................................................................................................................40
5.5.2 SetEmailConfig ................................................................................................................................................................................41
5.6Wlan ...........................................................................................................................................................................................................41
5.6.1 GetWlanConfig ................................................................................................................................................................................41
5.6.2 SetWlanConfig ................................................................................................................................................................................42
5.7UPnP ...........................................................................................................................................................................................................43
5.7.1 GetUPnPConfig ...............................................................................................................................................................................43
5.7.2 SetUPnPConfig ................................................................................................................................................................................43
5.7.3 GetUPnPStatus ................................................................................................................................................................................44
5.8NTP .............................................................................................................................................................................................................44
5.8.1 GetNTPConfig..................................................................................................................................................................................44
5.8.2 SetNTPConfig ..................................................................................................................................................................................44

4
5.9RTSP ............................................................................................................................................................................................................45
5.9.1 GetRTSPConfig ................................................................................................................................................................................45
5.9.2 SetRTSPConfig .................................................................................................................................................................................46
6.Events ...................................................................................................................................................................................................................46
6.1EventHandler ..............................................................................................................................................................................................46
6.1.1 GetEventHandler.............................................................................................................................................................................46
6.1.2 SetEventHandler ............................................................................................................................................................................. 47
6.2Alarm ..........................................................................................................................................................................................................49
6.2.1 GetAlarmConfig ..............................................................................................................................................................................49
6.2.2 SetAlarmConfig ...............................................................................................................................................................................49
6.2.3 GetAlarmOutConfig.........................................................................................................................................................................50
6.2.4 SetAlarmOutConfig .........................................................................................................................................................................50
6.2.5 GetInSlots ........................................................................................................................................................................................50
6.2.6 GetOutSlots .....................................................................................................................................................................................51
6.2.7 GetInState .......................................................................................................................................................................................51
6.2.8 GetOutState ....................................................................................................................................................................................51
6.2.9 GetChannelInState ..........................................................................................................................................................................51
6.2.10 GetChannelOutState .....................................................................................................................................................................51
6.3MotionDetect ............................................................................................................................................................................................. 52
6.3.1 GetMotionDetectConfig .................................................................................................................................................................. 52
6.3.2 SetMotionDetectConfig .................................................................................................................................................................. 52
6.4BlindDetect .................................................................................................................................................................................................53
6.4.1 GetBlindDetectConfig .....................................................................................................................................................................53
6.4.2 SetBlindDetectConfig ......................................................................................................................................................................54
6.5LossDetect ..................................................................................................................................................................................................54
6.5.1 GetLossDetectConfig .......................................................................................................................................................................54
6.5.2 SetLossDetectConfig .......................................................................................................................................................................54
6.6LoginFailureAlarm .......................................................................................................................................................................................55
6.6.1 GetLoginFailureAlarmConfig ...........................................................................................................................................................55
6.6.2 SetLoginFailureAlarmConfig ............................................................................................................................................................55
6.7 StorageAbnormal .......................................................................................................................................................................................55
6.7.1 GetStorageNotExistConfig ...............................................................................................................................................................55
6.7.2 SetStorageNotExistConfig ...............................................................................................................................................................55
6.7.3 Get StorageFailureConfig ................................................................................................................................................................56
6.7.4 Set StorageFailureConfig .................................................................................................................................................................56
6.7.5 GetStorageLowSpaceConfig ............................................................................................................................................................56
6.7.6 SetStorageLowSpaceConfig .............................................................................................................................................................56
6.8 NetAbnormal ............................................................................................................................................................................................. 57
6.8.1 GetNetAbortConfig ......................................................................................................................................................................... 57
6.8.2 SetNetAbortConfig .......................................................................................................................................................................... 57
6.8.3 GetIPConflictConfig ......................................................................................................................................................................... 57
6.8.4 SetIPConflictConfig ......................................................................................................................................................................... 57
6.9 GetEventIndexes ........................................................................................................................................................................................58
6.10 Attach.......................................................................................................................................................................................................58
7.PTZ ........................................................................................................................................................................................................................59

5
7.1PTZConfig ....................................................................................................................................................................................................59
7.1.1 GetPTZConfig ..................................................................................................................................................................................59
7.1.2 SetPTZConfig ...................................................................................................................................................................................60
7.2PTZControl ..................................................................................................................................................................................................61
7.2.1 GetProtocolList................................................................................................................................................................................61
7.2.2 GetCurrentProtocolCaps .................................................................................................................................................................61
7.2.3 PTZ control commands ................................................................................................................................................................... 62
7.3PTZStatus ....................................................................................................................................................................................................65
7.3.1 PTZ GetStatus ..................................................................................................................................................................................65
8.Record&Snap ........................................................................................................................................................................................................65
8.1Record .........................................................................................................................................................................................................65
8.1.1 GetRecordConfig .............................................................................................................................................................................65
8.1.2 SetRecordConfig..............................................................................................................................................................................66
8.1.3 GetRecordModeConfig ...................................................................................................................................................................66
8.1.4 SetRecordModeConfig ....................................................................................................................................................................66
8.2Snap ............................................................................................................................................................................................................ 67
8.2.1 GetSnapConfig ................................................................................................................................................................................ 67
8.2.2 SetSnapConfig ................................................................................................................................................................................. 67
8.3MediaGlobal ...............................................................................................................................................................................................68
8.3.1 GetMediaGlobalConfig....................................................................................................................................................................68
8.3.2 SetMediaGlobalConfig ....................................................................................................................................................................68
8.4Holiday ........................................................................................................................................................................................................68
8.4.1 GetHolidayConfig ............................................................................................................................................................................68
8.4.2 SetHolidayConfig .............................................................................................................................................................................69
9.System ..................................................................................................................................................................................................................69
9.1General .......................................................................................................................................................................................................69
9.1.1 GetGeneralConfig............................................................................................................................................................................69
9.1.2 SetGeneralConfig ............................................................................................................................................................................69
9.2SystemTime ................................................................................................................................................................................................ 70
9.2.1 GetCurrentTime .............................................................................................................................................................................. 70
9.2.2 SetCurrentTime............................................................................................................................................................................... 70
9.3Locales ........................................................................................................................................................................................................ 70
9.3.1 GetLocalesConfig ............................................................................................................................................................................ 70
9.3.2 SetLocalesConfig .............................................................................................................................................................................71
9.4Language ..................................................................................................................................................................................................... 72
9.4.1 GetLanguageCaps ........................................................................................................................................................................... 72
9.4.2 GetLanguageConfig ......................................................................................................................................................................... 72
9.4.3 SetLanguageConfig..........................................................................................................................................................................73
9.5AccessFilter .................................................................................................................................................................................................73
9.5.1 GetAccessFilterConfig .....................................................................................................................................................................73
9.5.2 SetAccessFilterConfig ......................................................................................................................................................................73
9.6AutoMaintain .............................................................................................................................................................................................. 74
9.6.1 GetAutoMaintainConfig .................................................................................................................................................................. 74
9.6.2 SetAutoMaintainConfig ................................................................................................................................................................... 74
9.7UserManager ..............................................................................................................................................................................................75

6
9.7.1 Group ..............................................................................................................................................................................................75

9.7.2 GetGroupInfo ..................................................................................................................................................................................75
9.7.3 GetGroupInfoAll ..............................................................................................................................................................................75
9.7.4 AddUser ..........................................................................................................................................................................................75
9.7.5 DeleteUser ...................................................................................................................................................................................... 76
9.7.6 ModifyUser ..................................................................................................................................................................................... 76
9.7.7 ModifyPassword .............................................................................................................................................................................77
9.7.8 GetUserInfo .....................................................................................................................................................................................77
9.7.9 GetUserInfoAll .................................................................................................................................................................................77
9.7.10 GetActiveUserInfoAll .....................................................................................................................................................................77
9.8System Operation ....................................................................................................................................................................................... 78
9.8.1 Reboot ............................................................................................................................................................................................ 78
9.8.2 Shutdown ........................................................................................................................................................................................ 78
9.8.3 GetDeviceType ................................................................................................................................................................................ 78
9.8.4 GetHardwareVersion ....................................................................................................................................................................... 78
9.8.5 GetSerialNo ..................................................................................................................................................................................... 78
9.8.6 GetMachineName ...........................................................................................................................................................................79
9.8.7 GetSystemInfo .................................................................................................................................................................................79
9.8.8 GetVendor .......................................................................................................................................................................................79
9.8.9 GetSoftwareVersion ........................................................................................................................................................................79
9.9 Log .............................................................................................................................................................................................................79
9.9.1 StartFind .........................................................................................................................................................................................79
9.9.2 DoFind.............................................................................................................................................................................................80
9.9.3 StopFind ..........................................................................................................................................................................................80
9.9.4 Clear ................................................................................................................................................................................................80
10.Storage................................................................................................................................................................................................................81
10.1 File Finding ..............................................................................................................................................................................................81
10.1.1 Create............................................................................................................................................................................................81
10.1.2 StartFind .......................................................................................................................................................................................81
10.1.3 FindNextFile ..................................................................................................................................................................................82
10.1.4 Close .............................................................................................................................................................................................82
10.1.5 Destroy ..........................................................................................................................................................................................83
10.2 Storage Device .........................................................................................................................................................................................83
10.2.1 GetStorageDeviceCollect ..............................................................................................................................................................83
10.3 Work Group .............................................................................................................................................................................................83
10.3.1 GetWorkGroupCollect ...................................................................................................................................................................83
10.4 Work Directory .........................................................................................................................................................................................83
10.4.1 GetWorkDirectoryCollect ..............................................................................................................................................................83
10.5 NAS ..........................................................................................................................................................................................................84
10.5.1 GetNASConfig ...............................................................................................................................................................................84
10.5.2 SetNASConfig ................................................................................................................................................................................84
10.6 Storage Point ............................................................................................................................................................................................85
10.6.1 GetRecordStoragePointConfig ......................................................................................................................................................85
10.6.2 SetRecordStoragePointConfig .......................................................................................................................................................85
10.6.3 GetStorageGroupConfig ................................................................................................................................................................85

7
10.6.4 SetStorageGroupConfig.................................................................................................................................................................86
11.Audio ..................................................................................................................................................................................................................86
11.1 Audio MIME type .....................................................................................................................................................................................86
11.2 Post Audio ................................................................................................................................................................................................ 87
11.2.1 Example for singlepart .................................................................................................................................................................. 87
11.2.2 Example for multipart ................................................................................................................................................................... 87
11.3 Get Audio .................................................................................................................................................................................................88
11.3.1 Example for singlepart ..................................................................................................................................................................88
11.3.2 Example for multipart ...................................................................................................................................................................88
12.Appendix.............................................................................................................................................................................................................89
12.1 Stream Format .........................................................................................................................................................................................89
13.VedioInput ..........................................................................................................................................................................................................91
13.1 AdjustFocus ..............................................................................................................................................................................................91
13.2 AdjustFocusContinuously .........................................................................................................................................................................91
13.3 AutoFocus ................................................................................................................................................................................................ 92
13.4 GetFocusStatus ........................................................................................................................................................................................ 92
14. SD Camera ......................................................................................................................................................................................................... 92
14.1 VideoInWhiteBalance .............................................................................................................................................................................. 92
14.1.1 GetVideoInWhiteBalance ............................................................................................................................................................. 92
14.2.2 SetVideoInWhiteBalance ..............................................................................................................................................................93
14.2 VideoInExposure ......................................................................................................................................................................................93
14.2.1 GetVideoInExposure .....................................................................................................................................................................93
14.2.2 SetVideoInExposure ......................................................................................................................................................................95
14.3 VideoInDenoise ....................................................................................................................................................................................96
14.3.1 GetVideoInDenoise .......................................................................................................................................................................96
14.3.2 SetVideoInDenoise ....................................................................................................................................................................... 97
14.4 VideoInDayNight .................................................................................................................................................................................. 97
14.4.1 GetVideoInDayNight ..................................................................................................................................................................... 97
14.4.2 SetVideoInDayNight ......................................................................................................................................................................98
14.5 VideoInFocus ..........................................................................................................................................................................................98
14.5.1 GetVideoInFocus...........................................................................................................................................................................98
14.5.2 SetVideoInFocus ...........................................................................................................................................................................99
14.6 VideoInZoom ..........................................................................................................................................................................................99
14.6.1 GetVideoInZoom...........................................................................................................................................................................99
14.6.2 SetVideoInZoom .........................................................................................................................................................................100
14.7 VideoInSharpness ..............................................................................................................................................................................100
14.7.1 GetVideoInSharpness .................................................................................................................................................................100
14.7.2 SetVideoInSharpness ..................................................................................................................................................................100
14.8 VideoInColor .........................................................................................................................................................................................101
14.8.1 GetVideoInColor .........................................................................................................................................................................101
14.8.2 SetVideoInColor .......................................................................................................................................................................... 102
14.9 VideoInRotate ....................................................................................................................................................................................... 102
14.9.1 GetVideoInRotate ....................................................................................................................................................................... 102
14.9.2 SetVideoInRotate ........................................................................................................................................................................103
14.10 VideoInMode ......................................................................................................................................................................................103

8
14.10.1 GetVideoInMode ......................................................................................................................................................................103

14.10.2 SetVideoInMode .......................................................................................................................................................................104
3.HTTP API Transaction

3.1Transaction
The HTTP API Transaction starts from a request from a client Application, usually a web browser. The request is processed by the web
server on the CPPLUS video products, then send the response back to the client application. The HTTP request is taken in GET form. If the
request is successful, the CPPLUS video product will return a HTTP header contains 200 OK. The HTTP Body will contain actual data or error
message if an error occurs.
For describe convenience, we use some short words to instead the long expressions. The follows are several regulations:
1.
The italics and bold will be replaced by the value behind the symbol =.
2.
The URL must follow the standard way of writing a URL.(RFC_3986:Uniform Resource Identifiers (URI) Generic Syntax);that is ,spaces
and other reserved characters (;, /, ?, :, @, =, +, , and $) within a <paramName> or a <paramValue> must be replaced
with %<ASCII hex>.For example ,the blank must be instead with %20.
3.
To describe the range of the configuration, we use some symbols such as [], {} and so on. For example :[0-100] denotes a
integer not less than 0 and not larger than 100. {0,1,2,3} denotes the valid value of a integer among 0,1,2 and 3.
4.
In the request and response, we use [] to denote an array. The index is usually a integer and start form 0.
5.
The parameter value has several types: string, integer, bool and float.Integer is 32 bits.The range of bool is true and false.
The below is an example of a transaction:

Request
GET http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoColor
Description
Get VideoColor configuration.
Response
HTTP/1.1 200 OK
Content-Type:text/plain
head.Brightness=50
head.Contrast=50
head.Hue=50
head.Saturation=50
head.TimeSection=1 00:00:00-24:00:00
Comment
In above table, head= table.VideoColor[ChannelNo][ColorConfigNo]

ChannelNo = video channel index,
colorConfigNo = color config index.
0 = Color Config 1
1 = Color Config 2
We can also request the single config.

For example:
Request :
GET http://10.7.2.4/cgi-bin/configManager.cgi?action=getConfig&name=VideoColor[0][0].Brightness
Response:

9
HTTP/1.1 200 OK
Content-Type:text/plain
table.VideoColor[0][0].Brightness=50
3.2Authentication
The CPPLUS video product supplies two authentication ways: basic authentication and digest authentication. If the http request does not
have
Authorization , the CPPLUS video product returns 401, utill the http request has a legal authentication .
For example:
1. When basic authentication, the CPPLUS video product response:
401 Unauthorized
WWW-Authenticate: Basic realm=XXXXXX
Then the client encode the username and password with base64, send the following request:
Authorization: Basic VXZVXZ.
2. When digest authentication, the CPPLUS video product response:
WWW-Authenticate: Digest realm="DH_00408CA5EA04", nonce="000562fdY631973ef04f77a3ede7c1832ff48720ef95ad",
stale=FALSE, qop="auth";
The client calculates the digest using username, password, nonce, realm and URI with MD5, then send the following request:
Authorization: Digest username="admin", realm="DH_00408CA5EA04", nc=00000001,cnonce="0a4f113b",qop="auth"
nonce="000562fdY631973ef04f77a3ede7c1832ff48720ef95ad",uri="cgi-bin/global.login?userName=admin",
response="65002de02df697e946b750590b44f8bf"
4.Camera
Camera API allows application to configure and view CPPLUS video product settings.
4.1Stream
4.1.1 GetStream
URL Syntax
rtsp://<username>:<password>@<ip>:<port>/cam/realmonitor?channel=<channelNo>&subtype=<typeNo>
Comment
<username>: a valid users username.

10
<password> :users password.

<ip> :the IP address of the CPPLUS video product.
<port >:the default port is 554. It can be omitted. It can be obtained in 5.10.1 GetRTSPConfig.
<channelNo> :the channel number. It starts from 1.
<typeNo> :the stream type. The <typeNo> of main stream is 0, extra stream 1 is 1, extra stream 2 is 2.The extra stream
counts can be obtained in 4.1.2 GetMaxStreamCounts. The stream must be enabled by setting
head.VideoEnable
to
true in 4.4.4 SetVideoEncodeConfig.

For example, we request the extra stream 1 of channel 1, the URL is:
rtsp://admin:[email protected]:554/cam/realmonitor?channel=1&subtype=1.
The IP Camera supports both TCP and UDP transmission forms.
It also supplies basic authentication and digest authentication ways. The authentication process is similar with 3.2
Authentication.
4.1.2 GetMaxExtraStreamCounts
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getProductDefinition&name=MaxExtraStream
Response
table.MaxExtraStream=1
Comment
In above table, the range of table.MaxExtraStream is {1,2,3}
4.1.3 GetSnapshot
URL Syntax
http://<ip>/cgi-bin/snapshot.cgi? [channel=<channelNo>]
Response
A picture encoded by jpg
Comment
The channel number is default 0 if the request is not carried the param.
4.1.4 GetVideo
URL Syntax
http://<ip>/cgi-bin/mjpg/video.cgi?[channel=<channelNo>]
Response
video stream encoded by mjpg

Return:
HTTP Code:200 OK
Content-Type:multipart/x-mixed-replace;boundary=<boundary>
Body:
--<boundary>
Content-Type:image/jpeg
Content-Length:<image size>
<JPEG image data>
--<boundary>
Comment
The channel number is default 0 if the request is not carried the param.

11
4.1.5 PlayBack
URL Syntax
rtsp://<username>:<password>@<ip>:<port>/<filename>
Response
Its similar with 4.1.1 GetStream.

For example:
rtsp://admin:[email protected]:554//mnt/sd/2012-07-13/001/dav/09/09.30.37-09.30.47[R][0@0][0].dav
4.1.6 LoadFile
URL Syntax
http://<ip>/cgi-bin/RPC_Loadfile/<filename>
Response
HTTP Code: 200 OK

Content-Type: Application/octet-stream
Content-Length:<fileLength>
Body:
<data>
<data>
For example:
http://10.61.5.117/cgi-bin/RPC_Loadfile/mnt/sd/2012-07-13/001/dav/09/09.30.37-09.30.47[R][0@0][0].dav
4.1.7 GetStream By Http

URL Syntax
http://<ip>/cgi-bin/realmonitor.cgi?action=getStream&channel=<channelNo>&subtype=<typeNo>
Response
HTTP Code: 200 OK

Body:
<data>
<data>
Comment
Compared to 4.1.1 GetStream using RTSP, it is another way of get stream. This is a way to use http
protocol to get realmonitor stream. The data format is shown in appendix.
4.1.8 Playback By Http

URL Syntax
http://<ip>/cgi-bin/playBack.cgi?action=getStream&channel=<channelNo>&subtype=<typeNo>&startTime=<startTime>&
endTime=<endTime>
Response
HTTP Code: 200 OK

Body:
streamId=<streamId>\r\n

12
<data>
<data>
Comment
Compared to 4.1.5 Playback using RTSP, it is another way of get playback stream. This is a way to use
http protocol to get playback stream. The data format is shown in appendix.
URL Syntax
http://<ip>/cgi-bin/playBack.cgi?action=control&streamId=<streamId>&cmd=<cmd>&<paramName>=<paramValue>[&<
paramName>=<paramValue>...]
Response
OK or ERROR
Comment
Control the playback stream

Cmd=play
Speed=<speed> optional, default speed=1,if speed > 0, play back forward, else if speed < 0, playback
backward(param iframe is ignored, only support iframe playback backward);
Iframe=<iframe> optional, default iframe=0, if iframe=1, playback I frame only;
seekTime=<seekTime> seek time, optional, default playback from the stream current point;
cmd=pause
pause the playback stream;
cmd=cancel
cancel the playback stream, and destroy the streamed;
This is the cgi to control playback stream, used to control the stream which built by action=getStream.
4.2VideoColor
4.2.1 GetVideoColorConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoColor
Response
head.Brightness=50
head.Contrast=50
head.Hue=50
head.Saturation=50
head.TimeSection=1 00:00:00-24:00:00
Comment
In above table, head= table.VideoColor[ChannelNo][ColorConfigNo]

colorConfigNo = color config index.
0 = Color Config 1
1 = Color Config 2

13
4.2.2 SetVideoColorConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&<paramName>=<paramValue>[&<paramName>=<paramValue>...]
Response
OK or ERROR
Comment
In below table, head=VideoColor[ChannelNo][ColorConfigNo]

colorConfigNo = color config index,
0 = Color Config 1
1 = Color Config 2
ParamName
ParamValue type
Description
head.Brightness
integer
Brightness, range is [0-100]
head.Contrast
integer
Contrast, range is [0-100]
head.Hue
integer
Hue
head.Saturation
integer
Saturation
head.TimeSection
string
Effective time for this video color config.

Format is: mask starttime endtime
Mask range is {0, 1}.
Mask 0 this video config is not effective
Mask 1 - this config is effective
Starttime/Endtime format like 11:00:00.
Example:
0 01:00:00-02:00:00, means this config is not effective.
1 01:00:00-02:00:00, means this config is effective between 01:00:00 and 02:00:00
4.3VideoInOptions
4.3.1 GetVideoInputCaps
URL Syntax
http://<ip>/cgi-bin/devVideoInput.cgi?action=getCaps&channel=<channelNo>
Description
Get video input capabilities, channelNo is video in channel index.
Response
caps.Backlight=true
caps.ChipID=0
caps.CoverCount=0
caps.CoverType=0
caps.CustomManualExposure=true
caps.DayNightColor=true
caps.DownScaling=true
caps.Exposure=9

14
caps.ExternalSyncInput=true
caps.FlashAdjust=true
caps.Flip=true
caps.Gain=true
caps.GainAuto=true
caps.HorizontalBinning=1
caps.InfraRed=false
caps.Iris=false
caps.IrisAuto=false
caps.LadenBitrate=750000
caps.LimitedAutoExposure=true
caps.MaxHeight=1200
caps.MaxWidth=1600
caps.Mirror=false
caps.NightOptions=false
caps.ReferenceLevel=false
caps.Rotate90=false
caps.SetColor=true
caps.SignalFormats=Inside,720p,1080p
caps.SyncChipChannels=false
caps.TitleCount=0
caps.UpScaling=false
caps.VerticalBinning=1
caps.WhiteBalance=2
Field in response
Value type
Description
Backlight
bool
True: support backlight
ChipID
String
ID of chips in this channel
CoverCount
integer
The maximum cover region count.
CoverType
integer
0: dont support cover

1: support realtime cover
2: support non-realtime cover
CustomManualExposure
bool,
true: support use defined manual exposure time
DayNightColor
bool
true: support color alternate between day and night.
DownScaling
bool
true: support down scaling, binning mode not included.
Exposure
integer
Exposure grade. 0 dont support exposure control.
ExternalSyncInput
bool
true: support HD signal external synchronization.
FlashAdjust
bool
true: support flash adjust
Flip
bool
true: support picture flip.
Gain
bool
true: support gain control.
GainAuto
bool
true: support auto gain.
HorizontalBinning
integer
Horizontal/Vertical pixel binning mask,
VerticalBinning
integer
1 support 2 pixel binning,

15
2 support 3 pixel binning

4 - support 4 pixel binning
2^n support n+2 pixel binning

InfraRed
bool
true: support Infra compensation
Iris
bool
true: support Iris adjust
IrisAuto
bool
true: support auto Iris adjust
LadenBitrate
integer
Unit is Kbps.
Maximum value of video stream bitrate, 16bpp, not in binning mode.
LimitedAutoExposure
bool
true: support auto exposure with time limit.
MaxHeight
integer
Maximum video height
MaxWidth
integer
Maximum video width
Mirror
bool
true: support picture mirror.
NightOptions
bool
true: support night options.
ReferenceLevel
bool
true: support reference level.
Rotate90
bool
true: support clockwise/anticlockwise 90rotate
SetColor
bool
true: support color set.
SignalFormats
string
Its a string contains supported video input signal formats for this channel. Signal formats
are separated by comma.
Range is {Inside, BT656, 720p,1080p, 1080i, 1080sF, 1_3M}
Inside inside input.
1_3M - 1280*960
SyncChipChannels
bool
True: channels in same chip should be synchronized. Synchronized means video resolution
of these channels should be the same.
TitleCount
integer
Maximum count of blending titles.
UpScaling
bool
true: support up scaling.
WhiteBalance
integer
Range is {0, 1, 2, 3}
0 dont support white balance.
1 support auto white balance
2 - support auto and pre defined white balance.
3 - support auto, pre defined and user defined white balance
4.3.2 GetVideoInOptionsConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInOptions
Description
Video in options contain Backlight, ExposureSpeed, DayNightColor. DayOptions, NightOptions, NormalOptions and so on
Response
head.Backlight=0
head.DayNightColor=false
head.ExposureSpeed=0
head.ExposureValue1=0.100000

16
head.ExposureValue2=80.000000
head.ExternalSync=0
head.ExternalSyncPhase=0
head.FlashControl.Mode=0
head.FlashControl.Pole=0
head.FlashControl.Value=0
head.FlashControl.PreValue=0
head.Flip=false
head.Gain=50
head.GainAuto=true
head.IrisAuto=false
head.Mirror=false
head.NightOptions.AntiFlicker=0
head.NightOptions.Backlight=0
head.NightOptions.BacklightRegion[0]=3096
head.NightOptions.BrightnessThreshold=50
head.NightOptions.DayNightColor=2
head.NightOptions.ExposureMode=0
head.NightOptions.ExposureSpeed=0
head.NightOptions.ExposureValue1=0
head.NightOptions.ExposureValue2=40
head.NightOptions.ExternalSyncPhase=125
head.NightOptions.Flip=false
head.NightOptions.Gain=50
head.NightOptions.GainAuto=true
head.NightOptions.GainBlue=50
head.NightOptions.GainGreen=50
head.NightOptions.GainMax=50
head.NightOptions.GainMin=0
head.NightOptions.GainRed=50
head.NightOptions.GlareInhibition=0
head.NightOptions.IrisAuto=true
head.NightOptions.Mirror=false
head.NightOptions.Profile=3
head.NightOptions.ReferenceLevel=50
head.NightOptions.Rotate90=0
head.NightOptions.SunriseHour=0
head.NightOptions.SunriseMinute=0
head.NightOptions.SunriseSecond=0
head.NightOptions.SunsetHour=23
head.NightOptions.SunsetMinute=59

17
head.NightOptions.SunsetSecond=59
head.NightOptions.SwitchMode=4
head.NightOptions.WhiteBalance=Auto
head.NightOptions.WideDynamicRange=0
head.NightOptions.WideDynamicRangeMode=0
head.NormalOptions.AntiFlicker=0
head.NormalOptions.Backlight=0
head.NormalOptions.BacklightRegion[0]=3096
head.NormalOptions.BrightnessThreshold=50
head.NormalOptions.DayNightColor=1
head.NormalOptions.ExposureMode=0
head.NormalOptions.ExposureSpeed=0
head.NormalOptions.ExposureValue1=0
head.NormalOptions.ExposureValue2=40
head.NormalOptions.ExternalSyncPhase=125
head.NormalOptions.Flip=false
head.NormalOptions.Gain=50
head.NormalOptions.GainAuto=true
head.NormalOptions.GainBlue=50
head.NormalOptions.GainGreen=50
head.NormalOptions.GainMax=50
head.NormalOptions.GainMin=0
head.NormalOptions.GainRed=50
head.NormalOptions.GlareInhibition=0
head.NormalOptions.IrisAuto=true
head.NormalOptions.Mirror=false
head.NormalOptions.Profile=0
head.NormalOptions.ReferenceLevel=50
head.NormalOptions.Rotate90=0
head.NormalOptions.SunriseHour=0
head.NormalOptions.SunriseMinute=0
head.NormalOptions.SunriseSecond=0
head.NormalOptions.SunsetHour=23
head.NormalOptions.SunsetMinute=59
head.NormalOptions.SunsetSecond=59
head.NormalOptions.SwitchMode=0
head.ReferenceLevel=50
head.ReferenceLevelEnable=false
head.Rotate90=0
head.SignalFormat=BT656
head.WhiteBalance=Disable

18
Comment
In above table, head = table.VideoInOptions[ChannelNo]

ChannelNo = video channel index.
4.3.3 SetVideoInOptionsConfig
URL Syntax
Comment
In below table, head =VideoInOptions[ChannelNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head.Backlight
integer
Range is [0-n]
n depends on capability in 4.3.1 GetVideoInputCaps
0 backlight closed.
1 backlight grade 1
n backlight grade n
head.DayNightColor
integer
Range is {0,1,2}
0: always multicolor
1: autoswitch along with brightness
2: always monochrome
head.ExposureMode
integer
Range is {0,1,2, 4}
0: AutoExposure
1: Gain first
2: Exposure first
4:Manual.
head.ExposureSpeed
integer
Range is [0-n+1]
n depends on capability in 4.3.1 GetVideoInputCaps
0: AutoExposure
1-n-1: manual Exposure grade
n: AutoExposure with time limit.
n+1:manualExposure with user-defined time
(n is supported maximum exposure grade )
head.ExposureValue1
float
Range is [0.1-80], unit is millisecond

If ExposureSpeed is 0(AutoExposure enable), its lower limit of AutoExposure
time, otherwise its time of manualExposure
head.ExposureValue2
float
Range is [0.1-80], unit is millisecond

Upper limit of AutoExposure time, should be bigger than ExposureValue1
head.ExternalSync
integer
Range is {0,1}
External Synchronous
0: Internal Synchronization

19
1: External Synchronous
head.ExternalSyncPhase
integer
Range is [0-360]
External Synchronous Signal Phase
head.FlashControl.Mode
integer
Range is {0,1,2}
0:forbid flash
1:always flash
2:auto flash
head.FlashControl.Pole
integer
Range is {0,1, 2, 3}
Trigger mode:
0:low level
1:high level
2: rising-edge
3:falling-edge
head.FlashControl.Value
integer
Range is [0-15]
Flashlight time-unit:
0 - 0us,
1 - 64us,
2 - 128us,
3 192us
...
15 - 960us
head.FlashControl.PreValue
integer
Range is [0-100]
Its threshold of brightness value, if brightness is less than this value, flash light
begin to work.
head.Flip
bool
true: enable video flip function

false: disable video flip function
head.Gain
integer
Range is [0-100]
If GainAuto is true, its upper limit of auto gain, else its the fixed gain adjust
value.
head.GainBlue
integer
Range is [0-100]
Gain for blue value, Value is effective when WhiteBalance is Custom.
head.GainRed
integer
Range is [0-100]
Gain for red value, Value is effective when WhiteBalance is Custom.
head.GainGreen
integer
Range is [0-100]
Gain for green value, Value is effective when WhiteBalance is Custom.
head.GainAuto
bool
true: GainAuto
false: No GainAuto
head.IrisAuto
bool
true: IrisAuto
false: No IrisAuto
head.Mirror
bool
true: enable video mirror function

false: disable video mirror function
head.WhiteBalance
String
Range is {Disable, Auto, Custom, Sunny, Cloudy, Home, Office, Night}

White balance Mode
head.ReferenceLevel
integer
Range is [0-100]

20
The expected average brightness level of video frames.

head.Rotate90
integer
Range is {0,1,2}
Video rotation:
0: No rotate
1: clockwise rotate 90
2: anticlockwise rotate 90
head.SignalFormat
String
Range is {Inside, BT656, 720p, 1080p, 1080i, 1080sF}

Input Signal Mode
head.AntiFlicker
integer
Range is {0,1,2}
AntiFlicker mode:
0: Outdoor
1: 50 Hz AntiFlicker
2: 60 Hz AntiFlicker
head.GlareInhibition
integer
Range is [0-100]
GlareInhibition:
0: Close GlareInhibition.
head.NightOptions.BrightnessThreshold
integer
NightOptions contain a set of parameters used when brightness is not enough.

Range is [0-100]
when brightness is less than the BrightnessThreshold, parameters change to
Nightoptions.
head.NightOptions.IrisAuto
bool
true: IrisAuto
false: No IrisAuto
head.NightOptions.SunriseHour
integer
Range is [00-23]
Sunrise hour.
head.NightOptions.SunriseMinute
integer
Range is [00-59]
Sunrise minute
head.NightOptions.SunriseSecond
integer
Range is [00-59]
Sunrise second
head.NightOptions.SunsetHour
integer
head.NightOptions.SunsetMinute
integer
Sunset time. Its range is same with sunrise time, and it should be after sunrise
time.
head.NightOptions.SunsetSecond
integer
NightOptions are used if time is after sunset time and before sunrise time.
head.NightOptions.SwitchMode
integer
Range is {0,1,2}
0: NoSwitch,always use day options
1: Switch depends on brightness
2: Switch depends on time, switch to NightOptions when time is after sunset
time and before sunrise.
3: NoSwitch,always use NightOptions
4:No switch,always use NormalOptions.
head.NightOptions.Profile
integer
Range is {0,1,2,3}
0: use temporary day options
1: use temporary NightOptions
2: use temporary NormalOptions
3:depends on head.NightOptions.SwitchMode.
head.NightOptions.ExposureSpeed
integer
Range is the same as relevant items of day options in this table.

21
head.NightOptions.ExposureValue1
float
Example:
head.NightOptions.ExposureValue2
float
Value range of head.NightOptions.ExposureSpeed is the same with
head.NightOptions.Gain
integer
head. ExposureSpeed
head.NightOptions.GainAuto
bool
head.NightOptions.GainBlue
integer
head.NightOptions.GainGreen
integer
head.NightOptions.GainRed
integer
head.NightOptions.WhiteBalance
String
head.NightOptions.ReferenceLevel
integer
head.NightOptions.ExternalSyncPhase
integer
head.NightOptions.AntiFlicker
integer
head.NightOptions.Backlight
integer
head.NightOptions.DayNightColor
integer
head.NightOptions.ExposureMode
integer
head.NightOptions.GlareInhibition
integer
head.NightOptions.Mirror
integer
head.NightOptions.Flip
integer
head.NightOptions.Rotate90
integer
head.NomalOptions.BrightnessThreshold
integer
NomalOptions contain a set of parameters similar with NightOptions.
head.NormalOptions.IrisAuto
bool
Range is the same as relevant items of NightOptions in this table.
head.NormalOptions.SunriseHour
integer
head.NormalOptions.SunriseMinute
integer
head.NormalOptions.SunriseSecond
integer
head.NormalOptions.SunsetHour
integer
head.NormalOptions.SunsetMinute
integer
head.NormalOptions.SunsetSecond
integer
head.NormalOptions.ExposureSpeed
integer
Head.NormalOptions.ExposureValue1
float
head.NormalOptions.ExposureValue2
float
head.NormalOptions.Gain
integer
head.NormalOptions.GainAuto
bool
head.NormalOptions.GainBlue
integer
head.NormalOptions.GainGreen
integer
head.NormalOptions.GainRed
integer
head.NormalOptions.WhiteBalance
String
head.NormalOptions.ReferenceLevel
integer
head.NormalOptions.ExternalSyncPhase
integer
head.NormalOptions.AntiFlicker
integer
head.NormalOptions.Backlight
integer
head.NormalOptions.DayNightColor
integer
head.NormalOptions.ExposureMode
integer
head.NormalOptions.GlareInhibition
integer
head.NormalOptions.Mirror
integer

22
head.NormalOptions.Flip
integer
head.NormalOptions.Rotate90
integer
4.4VideoEncode
4.4.1 GetVideoConfigCaps
URL Syntax
http://<ip>/cgi-bin/encode.cgi?action=getConfigCaps
Description
Get video config capibilities.
Response
headMain.Video.BitRateOptions=448,2560
headMain.Video.CompressionTypes=H.264,MJPG
headMain.Video.FPSMax=25
headMain.Video.ResolutionTypes=2048 x 1536,1080,SXGA, 1280 x 960,720,D1,CIF
headExtra.Video.BitRateOptions=80,448
headExtra.Video.CompressionTypes=H.264,MJPG
headExtra.Video.FPSMax=25
headExtra.Video.ResolutionTypes=D1,CIF
headSnap.Video.CompressionTypes=H.264,MJPG
headSnap.Video.ResolutionTypes=2048 x 1536,1080,SXGA, 1280 x 960,720,D1,CIF
Comment
In above table:
Channel: video channel index
RecordType:
0 = regular record
1 = motion detection record
2 = alarm record
ExtraStream:
0 = extra stream 1
1 = extra stream 2
2 = extra stream 3
SnapType:
0 = regular snapshot
1 = motion detection snapshot
2 = alarm snapshot
Abbreviations in below table:
headMain= caps[Channel].MainFormat[RecordType]
headExtra = caps[Channel].ExtraFormat[ExtraStream]
headSnap = caps[Channel].SnapFormat[SnapType]
Field in respons
Value range
Description
BitRateOptions
string
Before comma is minimum bit rate. (kbps), after comma is maximum bit rate.(kbps)
BitRateOptions=80,448

23
80 is minimum bitrate, 448 is maximum.

CompressionTypes
FPSMax
ResolutionTypes
string
integer
string
It contains all supported video compression types separated by comma.

Range is {MPEG4, MPEG2, MPEG1, MJPG, H.263, H.264}
Maximum FPS.
It contains all supported video resolutions.
Range is in 4.4.2 Resolution.
4.4.2 Resolution
Fixed Resolution Name
Size in PAL
Size in NTSC
"D1"
704 x 576
704 x 480
"HD1"
352 x 576
352 x 480
"BCIF"
704 x 288
704 x 240
"CIF"
352 x 288
352 x 240
"QCIF"
176 x 144
176 x 120
"VGA"
640 x 480
"QVGA"
320 x 240
"SVCD"
480 x 480
"QQVGA"
160 x 128
"SVGA"
800 x 592
"XVGA"
1024 x 768
"WXGA"
1280 x 800
"SXGA"
1280 x 1024
"WSXGA"
1600 x 1024
"UXGA"
1600 x 1200
"WUXGA"
1920 x 1200
"ND1"
240 x 192
"720"
1280 x 720
"1080"
1920 x 1080
"1280x960"
1280 x 960 (1.3 Mega Pixels)
"1872x1408"
1872 x 1408 (2.5 Mega Pixels)
"3744x1408"
3744 x 1408 (5 Mega Pixels)
"2048x1536"
"2432x2048"
"1216x1024"
1216 x 1024 (1.2 Mega Pixels)
"1408x1024"
1408 x 1024 (1.5 Mega Pixels)
"3296x2472"
"2560x1920"
"960H",
960 x 576
"DV720P"
960 x 720
960 x 480

24
4.4.3 GetVideoEncodeConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Encode
Response
headMain.Video.BitRate=8192
headMain.Video.BitRateControl=CBR
headMain.Video.Compression=H.264
headMain.Video.FPS=25
headMain.Video.GOP=50
headMain.Video.Height=1200
headMain.Video.Profile=Main
headMain.Video.Quality=4
headMain.Video.Width=1600
headMain.VideoEnable=true
headExtra.Video.BitRate=8192
headExtra.Video.BitRateControl=CBR
headExtra.Video.Compression=H.264
headExtra.Video.FPS=25
headExtra.Video.GOP=50
headExtra.Video.Height=1200
headExtra.Video.Profile=Main
headExtra.Video.Quality=4
headExtra.Video.Width=1600
headExtra.VideoEnable=true
Comment

RecordType:
0 = regular record
2 = alarm record
ExtraStream:
0 = extra stream 1
1 = extra stream 2
2 = extra stream 3
Abbreviations in above table:
headMain= table.Encode[Channel].MainFormat[RecordType]
headExtra =table.Encode[Channel].ExtraFormat[ExtraStream]
4.4.4 SetVideoEncodeConfig
URL Syntax
Comment

25
RecordType:
0 = regular record
2 = alarm record
ExtraStream:
0 = extra stream 1
1 = extra stream 2
2 = extra stream 3
Abbreviation in below table:
head=Encode[Channel].MainFormat[RecordType] (or)
Encode[Channel].ExtraFormat[ExtraStream]
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Video.BitRate
integer
Unit is Kbps
Range depends on capability in 4.4.1 GetVideoConfigCaps
head.Video.BitRateControl
string
Range is {CBR,VBR}
CBR: constant bitrate
VBR: variable bitrate, available when Video.Compression=H264
head.Video.Compression
String
Range is {MPEG4,MPEG2, MPEG1,MJPG,H.263,H.264}

Depends on capacity in 4.4.1 GetVideoConfigCaps
head.Video.FPS
float
Range is [0.2-30]. Frames per second.

< 1.0: several seconds/frame, FPS=0.3333: 3 seconds per frame.
>1.0: several frames/second. FPS=3: 3 frames per second.
head.Video.GOP
integer
Range is [1-100].
Group of picture, its the interval of I Frame,
Example: GOP=50, means there is one I frame every 49 P or B frames
head.Video.Height
integer
Video height
head.Video.Width
integer
Video Width
head.Video.Profile
String
Range is { Baseline, Main , Extended , High }

Only when video compression is H.264, its effective.
head.Video.Quality
integer
Range is [1-6].
Image Quality, available when Video.BitRateControl=VBR
1: worst quality
6: best quality
head.VideoEnable
bool
True: enable video

26
4.5AudioEncode
4.5.1 GetAudioConfigCaps
URL Syntax
Comment
The angle brackets below denotes a array
Response
caps[0].ExtraFormat[0].Audio.CompressionTypes=PCM,G.711A,G.711Mu
caps[0].ExtraFormat[1].
caps[0].MainFormat[0].Audio.CompressionTypes=PCM,G.711A,G.711Mu
caps[0].MainFormat[1]
Field in respons
Value range
CompressionTypes
string
Description
It contains all supported audio compression types, separated by comma.
Range is {PCM, ADPCM, G.711A, G.711Mu, G.726, G.729, MPEG2, AMR}
4.5.2 GetAudioEncodeConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Encode
Response
headMain.Audio.Bitrate=64
headMain.Audio.Compression=G.711A
headMain.Audio.Depth=16
headMain.Audio.Frequency=44000
headMain.Audio.Mode=0
headMain.AudioEnable=false
headExtra.Audio.Bitrate=64
headExtra.Audio.Compression=G.711A
headExtra.Audio.Depth=16
headExtra.Audio.Frequency=44000
headExtra.Audio.Mode=0
headExtra.AudioEnable=false
Comment

RecordType:
0 = regular record
2 = alarm record
ExtraStream:
0 = extra stream 1
1 = extra stream 2

27
2 = extra stream 3
headMain=table.Encode[Channel].MainFormat[RecordType]
headExtra=table.Encode[Channel].ExtraFormat[ExtraStream]
4.5.3 SetAudioEncodeConfig
URL Syntax
Comment

RecordType:
0 = regular record
2 = alarm record
ExtraStream:
0 = extra stream 1
1 = extra stream 2
2 = extra stream 3
Abbreviations in below table:
head=Encode[Channel].MainFormat[RecordType] (or)
Encode[Channel].ExtraFormat[ExtraStream]
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Audio.Bitrate
integer
Unit is kbps
Range depends on capacity in 4.5.1 GetAudioConfigCaps
head.Audio.Compression
string
Range depends on capacity in 4.5.1 GetAudioConfigCaps
head.Audio.Depth
integer
Audio sampling depth
head.Audio.Frequency
integer
Audio sampling frequency
head.Audio.Mode
integer
Range is {0,1,2,3,4,5,6,7}
Audio encode mode.
0: 4.75kbps,
1: 5.15 kbps,
2: 5.9 kbps,
3: 6.7 kbps,
4: 7.4 kbps,
5: 7.95 kbps,
6: 10.2 kbps,
7: 12.2 kbps,

28
head.AudioEnable
bool
Enable/Disable audio
4.6 SnapEncode
4.6.1 GetSnapConfigCaps
URL Syntax
Comment

SnapType:
2 = alarm snapshot
Response
caps[Channel].SnapFormat[SnapType].Video.CompressionTypes=H.264,MJPG
caps[Channel].SnapFormat[SnapType].Video.ResolutionTypes=3M,1080,SXGA,1_3M,720,D1,CIF
Field in respons
Value range
CompressionTypes
string
ResolutionTypes
Description
It contains all supported video compression types separated by comma.
Range is {MPEG4, MPEG2, MPEG1, MJPG, H.263, H.264}
It contains all supported video resolutions, separated by comma.
string
Range is {D1, HD1, BCIF, CIF, QCIF, VGA, QVGA, SVGA, XVGA, WXGA, SXGA, WSXGA, UXGA,
WUXGA, ND1,720, 1080, 1_3M, 2_5M, 3M, 5M}.
4.6.2 GetSnapEncodeConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Encode [Channel].SnapFormat
Response
headSnap.Video.BitRate=384
headSnap.Video.BitRateControl=VBR
headSnap.Video.Compression=H.264
headSnap.Video.FPS=1
headSnap.Video.GOP=50
headSnap.Video.Height=576
headSnap.Video.Quality=4
headSnap.Video.Width=704
headSnap.VideoEnable=true
Comment

SnapType:

29

2 = alarm snapshot
headSnap = table.Encode[Channel].SnapFormat[SnapType]
4.6.3 SetSnapEncodeConfig
URL Syntax
Comment

SnapType:
2 = alarm snapshot
Abbreviation in below table:
head= Encode[Channel].SnapFormat[SnapType]
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Video.BitRate
integer
Unit is Kbps
Range depends on capability in 4.3.1 GetVideoInputCaps
head.Video.BitRateControl
string
Range is {CBR,VBR}
CBR: constant bitrate
VBR: variable bitrate
head.Video.Compression
String
Range is {MPEG4,MPEG2, MPEG1,MJPG,H.263,H.264}

Depends on capacity in 4.3.1 GetVideoInputCaps
head.Video.FPS
float
Range is [0.2-30]. The lower limit can be reached 0.00002 with firmware 2.4 and
above.
Frames per second.
< 1.0: several seconds/frame, FPS=0.3333: 3 seconds per frame.
>1.0: several frames/second. FPS=3: 3 frames per second.
head.Video.GOP
integer
Range is [1-100].
Group of picture, its the interval of I Frame,
Example: GOP=50, means there is one I frame every 49 P or B frames
head.Video.Height
integer
Video height
head.Video.Width
integer
Video Width
head.Video.Quality
integer
Range is [1-6].
Image Quality, available when Video.BitRateControl=VBR
1: worst quality
6: best quality

30
head.VideoEnable
bool
True: enable video
4.7ChannelTitle
4.7.1 GetChannelTitleConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=ChannelTitle
Comment
Get the title of the channel.

In below table, Channel = video channel index
Response
table.ChannelTitle[Channel].Name=CAM1
4.7.2 SetChannelTitleConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&<paramName>=<paramValue>
Comment
Set the title of the channel.

If VideoWidget[Channel].ChannelTitle.EncodeBlend is true, this title is blended to the video frames.
Please refer to 4.8.2 SetVideoWidget
In below table, Channel : video channel index
Response
OK or ERROR
ParamName
ParamValue type
Description
ChannelTitle[Channel].Name
String
Channel Name
4.8VideoStandard
4.8.1 GetVideoStandardConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoStandard
Comment
Response
table.VideoStandard=PAL
4.8.2 SetVideoStandardConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&<paramName>=<paramValue>

31
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
VideoStandard
string
Range is {PALNTSC}
Video Standard
4.9VideoWidget
4.9.1 GetVideoWidgetConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoWidget
Description
VideoWidget config contains ChannelTitle, Covers and TimeTitle parameters, defines the background color, front color and
positions of channel title and time title, and defines the regions which are not visible (cover).
Response
head.BackColor[0]=0
head.BackColor[1]=0
head.BackColor[2]=0
head.BackColor[3]=128
head.EncodeBlend=true
head.FrontColor[0]=255
head.Rect[0]=0
head.Rect[1]=8191
head.Rect[2]=0
head.Rect[3]=8191
Comment

CoReg: Cover Region
Covers is an array which sustains multi- Cover regions
0 = region 1
1 = region 2
2 = region 3
3 = region 4
head=table.VideoWidget[Channel].ChannelTitle (or)
table.VideoWidget[Channel].Covers[CoReg] (or)
table.VideoWidget[Channel].TimeTitle
table.VideoWidget[Channel].CustomTitle[index]

32
4.9.2 SetVideoWidgetConfig
URL Syntax
Comment

CoReg :Cover region index
Covers is an array which contains multiple cover regions
0 = region 1
1 = region 2
2 = region 3
3 = region 4
headChannelTitle = VideoWidget[Channel].ChannelTitle
headCover
= VideoWidget[Channel].Covers[CoReg]
headTimeTitle
= VideoWidget[Channel].TimeTitle
headCustomTitle = VideoWidget[Channel].CustomTitle
VideoWidgetConfig contains cover region settings, channel title settings and time title settings.
The italics below will be replaced by the above abbreviations.
Response
OK or ERROR
ParamName
ParamValue type
Description
headCover.BackColor[0]
integer
Range is [0-255].
BackColor[0]:red value
BackColor[1]:green value
BackColor[2]:blue value
BackColor[3]: alpha value
headCover.EncodeBlend
bool
false - widget blend is disabled.
headCover.FrontColor[0]
integer
Range is [0-255].
FrontColor[0]:red value
FrontColor[1]:green value
FrontColor[2]:blue value
FrontColor[3]: alpha value
headCover.Rect[0]
integer
Range is [0-8191].
headCover.Rect[1]
Rect[0]top left corner x coordinate (left)
headCover.Rect[2]
Rect[1]top left corner y coordinate (top)
headCover.Rect[3]
Rect[2]bottom right x coordinate (right)

Rect[3]bottom right y coordinate (bottom)
headChannelTitle.BackColor[0]
integer
Range is the same with headCover
headChannelTitle.EncodeBlend
bool
headChannelTitle.FrontColor[0]
integer

33
headChannelTitle.Rect[0]
integer
Only use the value of (left,top),the value of (right,bottom) is the same
as (left,top)
Rect[0], Rect[1] are used, and Rect[2] must be same with Rect[0],
Rect[3] must be same with Rect[1].
headTimeTitle.BackColor[0]
integer
Range is the same with headChannelTitle

These are configs about time title.
headTimeTitle.EncodeBlend
bool
headTimeTitle.FrontColor[0]
integer
headTimeTitle.Rect[0]
integer
headTimeTitle.ShowWeek
bool
True: Display week within the time title.
headCustomTitle.BackColor[0]
integer
headCustomTitle.EncodeBlend
bool
headCustomTitle.FrontColor[0]
integer
headCustomTitle.Rect[0]
integer
Range is [0-8191].

Rect[3]bottom right y coordinate (bottom).
PTZPreset.BackColor[0]
integer
PTZPreset.EncodeBlend
bool
PTZPreset.FrontColor[0]
integer
PTZPreset.Rect[0]
integer
Range is [0-8191].

34
PTZPreset.Rect[1]
PTZPreset.Rect[2]
PTZPreset.Rect[3]

Rect[3]bottom right y coordinate (bottom).
4.10VideoOut
4.10.1 GetVideoOutConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoOut
Description
Response
head.Margin[0]=0
head.Margin[1]=0
head.Margin[2]=0
head.Margin[3]=0
head.Color.Brightness=50
head.Color. Contrast =50
head.Color. Satuation =50
head.Color. Hue =50
head.Mode. Width =800
head.Mode. Height=600
head.Mode. BPP =16
head.Mode. Format =Auto
head.Mode. RefreshRate =60
Comment
head = table.VideoOut[channel].
4.10.2 SetVideoOutConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Margin[0]
integer
Margin
head.Color.Brightness
integer
Brightness
head.Color.Contrast =50
integer
Contrast
head.Color.Satuation =50
integer
Satuation
head.Margin[1]
head.Margin[2]
head.Margin[3]

35
head.Color.Hue =50
integer
Hue
head.Mode.Width =800
integer
Resolution
head.Mode.Height=600
head.Mode.BPP =16
integer
head.Mode.Format =Auto
string
The range is {Auto, TV, VGA, DVI}
head.Mode.RefreshRate =60
integer
Refresh rate.
4.11FlashLight
4.11.1 GetFlashLightConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=FlashLight
Description
Response
head .Brightness=50
head.Enable=false
head.TimeSection[0][0]=1 00:00:00-23:59:59
Comment
head = table.FlashLight
4.11.2 SetFlashLightConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
FlashLight.Enable
bool
Enable
FlashLight.Brightness
integer
Brightness
FlashLight.TimeSection[wd][ts]
string
Its table contains effective time period for flash light everyday.
wd (week day) range is [0-6] (Sunday-Staurday)
ts (time section) range is [0-23], its index of timesection table.
Format: mask hh:mm:ss-hh:mm:ss
Mask: {0,1}, hh: [0-24], mm: [00-59], ss: [00-59]
Mask 0: this time section is not used.
Mask 1: this time section is used.

36
Example:
TimeSection[1][0]=1 12:00:00-18:00:00
Means flash light is effective between 12:00:00 and 18:00:00 at
Monday.
5.NetWork
5.1NetInterfaces
5.1.1 GetInterfaces
URL Syntax
http://<ip>/cgi-bin/netApp.cgi?action=getInterfaces
Comment
Get all of the system network interfaces.

Description for items In below table
Name: network interface name.
eth0 - wired network interface
eth2 - wireless network interface
3G
- 3G network interface
Type: Normal wired network

Wireless wireless network
"Auto", "TD-SCDMA", "WCDMA", "CDMA1x", "EDGE", "EVDO" 3G network types.
Valid: network interface is valid if netInterface[n].Valid is true.
Response
netInterface[0].Name=eth0
netInterface[0].Type=Normal
netInterface[0].Valid=true
netInterface[1].
5.2BasicConfig
5.2.1 GetBasicConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Network
Comment
Basic config contains basic network parameters (Default interface, domain name, host name), and configuration of each
network interface.
interface in below table is network interface name, such as eth0, eth2

37
Response
table.Network.DefaultInterface=eth0
table.Network.Domain=CPPLUS
table.Network.Hostname=badak
table.Network.interface.DefaultGateway=10.7.0.1
table.Network.interface.DhcpEnable=false
table.Network.interface.DnsServers[0]=221.123.33.228
table.Network.interface.DnsServers[1]=221.12.1.228
table.Network.interface.IPAddress=10.7.2.3
table.Network.interface.MTU=1500
table.Network.interface.PhysicalAddress=00:10:5c:f2:1c:b4
table.Network.interface.SubnetMask=255.255.0.0
5.2.2 SetBasicConfig
URL Syntax
Comment
interface in below table is network interface name, such as eth0, eth1
Response
OK or ERROR
ParamName
ParamValue type
Description
NetWork.DefaultInterface
string
Set default network interface when multiple interfaces exist.

Range of interfaces is depends on 5.1.1 GetInterfaces
NetWork.Domain
string
Domain name.
NetWork.Hostname
string
Hostname and Domain compose a network address.
Network.interface.DefaultGateway
string
IP address
Network.interface.DhcpEnable
bool
Enable/Disable DHCP.
Network.interface.DnsServers[0]
string
IP address of first DNS server.
Network.interface.DnsServers[1]
string
IP address of second DNS server.
Network.interface.IPAddress
string
Interface IP address.
Network.interface.MTU
integer
Interface MTU.
Network.interface.PhysicalAddress
string
MAC address of interface.

HEX string in the form of:
xx:xx:xx:xx:xx:xx.
Range of x is [0-9,a-f,A-F]
Example:
00:10:5c:f2:1c:b4
00:10:5C:F2:1C:B5
Network.interface.SubnetMask
string
Network mask string:

In the form of x.x.x.x, range of x is [0-255]
Example:
255.255.255.0

38
5.3PPPoE
5.3.1 GetPPPoEConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=PPPoE
Comment
Response
table.PPPoE.Enable=false
table.PPPoE.Password=123456
table.PPPoE.UserName=123456
5.3.2 SetPPPoEConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
PPPoE.Enable
bool
Enable/Disable PPPoE.
PPPoE.UserName
string
PPPoE user name.
PPPoE.Password
string
PPPoE user password.
5.4DDNS
5.4.1 GetDDNSConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=DDNS
Comment
Index below is the DDNS protocol table index, start from 0.
Response
table.DDNS[index].Address=www.cpplusworld.com
table.DDNS[index].Enable=true
table.DDNS[index].HostName=www.cpplusworld.com
table.DDNS[index].KeepAlive=10
table.DDNS[index].Password=none
table.DDNS[index].Port=5050
table.DDNS[index].Protocol=CPPLUS
table.DDNS[index].UserName=user1

39
5.4.2 SetDDNSConfig
URL Syntax
Comment
Index below is the DDNS protocol table index, start from 0.
Response
OK or ERROR
ParamName
ParamValue type
Description
DDNS[index].Address
string
DDNS server IP address or name.
DDNS[index].Enable
bool
Multiple DDNS hostname can be configured, but Only one

hostname can be enabled, others should be disabled.
DDNS[index].HostName
String
Host name of this device.
DDNS[index].KeepAlive
integer
Range is [1-65535].
Unit is minutes.
DDNS[index].Password
string
DDNS user password
DDNS[index].Port
integer
Range is [1-65535].
Port of DDSN server
DDNS[index].Protocol
string
Range is {NO-IP DDNS, Dyndns DDNS, CPPLUS}.

DDSN protocol type
DDNS[index].UserName
string
DDNS user name
5.5Email
5.5.1 GetEmailConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Email
Comment
Response
table.Email.Address=www.cpplusworld.com
table.Email.Anonymous=true
table.Email.AttachEnable=true
table.Email.AttachmentEnable=true
table.Email.Enable=true
table.Email.HealthReport.Enable=false
table.Email.HealthReport.Interval=61
table.Email.Password=123456
table.Email.Port=26
table.Email.Receivers[0][email protected]
[email protected]
table.Email.SslEnable=false

40
table.Email.Title=DVRMessage
table.Email.UserName=anonymitty
5.5.2 SetEmailConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
Email.Address
string
SMTP server IP address or name.
Email.Anonymous
bool
Enable/Disable anonymous email.
Email.AttachEnable
bool
Enable/Disable email attachment
Email.AttachmentEnable
bool
Enable/Disable email attachment
Email.Enable
bool
Enable/Disable email function
Email.HealthReport.Enable
bool
Enable/Disable report device status by email.
Email.HealthReport.Interval
integer
Range is [30-1440].
Unit is minutes
Email.Password
string
User password of email account.
Email.Port
integer
Range is [1-65535]
Email.Receivers[0]
string
Email addresses of 3 receivers.
Email.Receivers[1]
string
Email.Receivers[2]
string
Email.SendAddress
string
Sender email address.
Email.SslEnable
bool
True: enable SSL email.
Email.Title
string
Title of email.
Email.UserName
string
User name of email account.
5.6Wlan
5.6.1 GetWlanConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=WLan
Comment
Response
table.WLan.eth2.Enable=true

41
table.WLan.eth2.Encryption=off
table.WLan.eth2.KeyFlag=false
table.WLan.eth2.KeyID=0
table.WLan.eth2.KeyType=Hex
table.WLan.eth2.Keys[0]=password1
table.WLan.eth2.LinkMode=Auto
table.WLan.eth2.SSID=CPPLUS
5.6.2 SetWlanConfig
URL Syntax
Comment
interface is name of wireless interface, to get all the network interfaces and their properties, refer to 5.1:NetInterfaces.
Response
OK or ERROR
ParamName
ParamValue type
Description
WLan.interface.Enable
bool
True: Enable WLan on this interface.
WLan.interface.Encryption
string
Range is {Off, On, WEP64Bits, WEP128Bits,

WPA-PSK-TKIP, WPA-PSK-CCMP}
Encryption mode.
WLan.interface.KeyFlag
bool
true: key is configured.
WLan.interface.KeyID
integer
Range is [0-3]
Indicates which key is used.
0 : WLan.interface.Keys[0] is used.
WLan.interface.KeyType
string
Range is {Hex, ASCII]
WLan.interface.Keys[0]
string
For ASCII key type: 64bits encryption key length is 5,
string
128bits encryption key length is 13, consists of [0-9,
string
a-z, A-Z]
string
For HEX key type: 64bits encryption key length is 10,
128bits encryption key length is 26, consists of [0-9,
a-z, A-Z]
WLan.interface.LinkMode
string
Range is {Auto, Ad-hoc, Infrastructure}.

Auto select suitable mode automatically.
Ad-hoc Device with wireless network adapter can
connect to each other without Access Point.
Infrastructure Integrate wire and wireless LAN
together to share network resource, access point is

42
need in this mode.

WLan.interface.SSID
string
5.7UPnP
5.7.1 GetUPnPConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=UPnP
Comment
Index in below is the UPNP map table index, start from 0.
Response
table.UPnP.Enable=true
table.UPnP.MapTable[index].Enable=true
table.UPnP.MapTable[index].InnerPort=80
table.UPnP.MapTable[index].OuterPort=8080
table.UPnP.MapTable[index].Protocol=TCP
table.UPnP.MapTable[index].ServiceName=HTTP
5.7.2 SetUPnPConfig
URL Syntax
Comment
Index in below table is UPNP map table index, range is [0-255]
Response
OK or ERROR
ParamName
ParamValue type
Description
UPnP.Enable
bool
Enable/Disable UPNP feature.
UPnP.MapTable[index].Enable
bool
Enable/Disable this UPNP map.
UPnP.MapTable[index].InnerPort
integer
Range is [1-65535].
Inner port number
UPnP.MapTable[index].OuterPort
integer
Range is [1-65535].
Outer port number.
UPnP.MapTable[index].Protocol
string
Range is {TCP, UDP]
UPnP.MapTable[index].ServiceName
string
User defined UPnP service name.

43
5.7.3 GetUPnPStatus
URL Syntax
http://<ip>/cgi-bin/netApp.cgi?action=getUPnPStatus
Comment
Get UPNP mapping result:

result=1: mapping succeed.
result=0: mapping failed.
Response
rsult=1
5.8NTP
5.8.1 GetNTPConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=NTP
Comment
Response
table.NTP.Address=clock.isc.org
table.NTP.Enable=false
table.NTP.Port=38
table.NTP.TimeZone=9
table.NTP.UpdatePeriod=31
5.8.2 SetNTPConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
NTP.Address
string
NTP server IP address or name.
NTP.Enable
bool
Enable/Disable NTP server.
NTP.Port
integer
Range is [1-65535].
Port of NTP server.
NTP.TimeZone
integer
Range is [0-32].
0:
"GMT+00:00"
1:
"GMT+01:00"
2:
"GMT+02:00"
3:
"GMT+03:00"
4:
"GMT+03:30"

44
NTP.UpdatePeriod
integer
5:
"GMT+04:00"
6:
"GMT+04:30"
7:
"GMT+05:00"
8:
"GMT+05:30"
9:
"GMT+05:45"
10:
"GMT+06:00"
11:
"GMT+06:30"
12:
"GMT+07:00"
13:
"GMT+08:00"
14:
"GMT+09:00"
15:
"GMT+09:30"
16:
"GMT+10:00"
17:
"GMT+11:00"
18:
"GMT+12:00"
19:
"GMT+13:00"
20:
"GMT-01:00"
21:
"GMT-02:00"
22:
"GMT-03:00"
23:
"GMT-03:30"
24:
"GMT-04:00"
25:
"GMT-05:00"
26:
"GMT-06:00"
27:
"GMT-07:00"
28:
"GMT-08:00"
29:
"GMT-09:00"
30:
"GMT-10:00"
31:
"GMT-11:00"
32:
"GMT-12:00"
Range is [0-65535], unit is minutes
5.9RTSP
5.9.1 GetRTSPConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=RTSP
Comment
Response
table.RTSP.Enable=true
table.RTSP.Port=554
table.RTSP.RTP.EndPort=40000
table.RTSP.RTP.StartPort=20000

45
5.9.2 SetRTSPConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
RTSP.Enable
bool
Enable/Disable RTSP.
RTSP.Port
integer
RTSP port.
RTSP.RTP.StartPort
integer
RTP start port.
RTSP.RTP.EndPort
integer
RTP end port.
6.Events
6.1EventHandler
EventHandler is used in alarm and event config in following sections. It contains settings for actions linked with alarm and events. Actions
include record, snapshot, PTZ action, log, mail, alarm out and so on.When alarm or event happen, actions defined in alarm EventHandler and
event EventHandler are executed.
6.1.1 GetEventHandler
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=<handlerName>
Comment
< handlerName> can be one of below four formats

Alarm[alarm channel].EventHandler
MotionDetect[video channel]. EventHandler
BlindDetect[video channel]. EventHandler
LossDetect[video channel]. EventHandler
LoginFailureAlarm.EventHandler
Example URL:
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Alarm[0].EventHandler
can get EventHandler settings of alarm channel 0.
Response
handlerName.EventHandler.AlarmOutChannels[0]=1

46
handlerName.EventHandler.AlarmOutChannels[1]=1
handlerName.EventHandler.AlarmOutEnable=false
handlerName.EventHandler.AlarmOutLatch=10
handlerName.EventHandler.BeepEnable=true
handlerName.EventHandler.Dejitter=0
handlerName.EventHandler.Delay=30
handlerName.EventHandler.LogEnable=true
handlerName.EventHandler.MailEnable=true
handlerName.EventHandler.PtzLink[0][0]=None
handlerName.EventHandler.PtzLink[0][1]=0
handlerName.EventHandler.PtzLink[1][0]=None
handlerName.EventHandler.PtzLink[1][1]=0
handlerName.EventHandler.PtzLinkEnable=false
handlerName.EventHandler.RecordChannels[0]=1
handlerName.EventHandler.RecordChannels[1]=1
handlerName.EventHandler.RecordEnable=true
handlerName.EventHandler.RecordLatch=10
handlerName.EventHandler.SnapshotChannels[0]=1
handlerName.EventHandler.SnapshotChannels[1]=1
handlerName.EventHandler.SnapshotEnable=false
handlerName.EventHandler.SnapshotPeriod=3
handlerName.EventHandler.SnapshotTimes=0
handlerName.EventHandler.TimeSection[0][0]=1 01:00:00-24:00:00
handlerName.EventHandler.TipEnable=true
handlerName.EventHandler. ExAlarmOutEnable=true
handlerName. ExAlarmOutChannels[0] =2
handlerName.ExAlarmOutChannels[1]=3
6.1.2 SetEventHandler
URL Syntax

47
Comment
Meaning of handlerName is the same with 6.1.1 GetEventHandler
Response
OK or ERROR
paramName
paramValue
Description
type
handlerName.EventHandler.AlarmOutChannels[ch]
integer
Range is {0, 1}, ch is alarm out channel index.

0 do not output alarm at alarm out channel ch
1 output alarm at alarm out channel ch
handlerName.EventHandler.AlarmOutEnable
bool
Enable/Disable alarm out function.
handlerName.EventHandler.AlarmOutLatch
Integer
Range is [10-300].
Unit is seconds, indicates the time to output alarm after input alarm is
cleared.
handlerName.EventHandler.BeepEnable
bool
Enable/Disable beep.
handlerName.EventHandler.Dejitter
integer
Range is [0-255].
Alarm signal dejitter seconds. Alarm signal change during this period is
ignored.
handlerName.EventHandler.Delay
integer
Range is [0-300].
Delay seconds before setting take effect.
handlerName.EventHandler.LogEnable
bool
Enable/Disable log for alarm.
handlerName.EventHandler.MailEnable
bool
Enable/Disable mail send for alarm.
handlerName.EventHandler.PtzLink[ch][0]
string
Range is {None, Preset, Tour, Pattern}

This is PTZ action linked with events. ch is PTZ channel index.
handlerName.EventHandler.PtzLink[ch][1]
integer
This is the parameter of PtzLink[ch][0],

If PtzLink[ch]][0] is
Preset: this is preset point.
Tour: this is tour path number.
Pattern: this is pattern number.
handlerName.EventHandler.PtzLinkEnable
Bool
Enable/Disable PTZ link.
handlerName.EventHandler.RecordChannels[ch]
Integer
Range is {0, 1}
0 do not record on video channel ch
1 record. on video channel ch
handlerName.EventHandler.RecordEnable
bool
Enable/Disable record function.
handlerName.EventHandler.RecordLatch
integer
Range is [10-300].
Unit is seconds, indicates the time to record after input alarm is cleared..
handlerName.EventHandler.SnapshotChannels[ch]
integer
Range is {0, 1}
0 do not snapshot on video channel ch
1 snapshot on video channel ch
handlerName.EventHandler.SnapshotEnable
bool
Enable/Disable snapshot function.
handlerName.EventHandler.SnapshotPeriod
integer
Range is [0-255].
Frames between snapshot.
0 means continuously snapshot for every frame.
handlerName.EventHandler.SnapshotTimes
integer
Range is [0-65535]
Snapshot times before stop, 0 means dont stop snapshot.

48
handlerName.EventHandler.TimeSection[wd][ts]
String
Its table contains effective time period for eventHanlder everyday.

wd (week day) range is [0-6] (Sunday-Staurday)
ts (time section) range is [0-23], its index of timesection table.
Mask: {0,1}, hh: [0-24], mm: [00-59], ss: [00-59]
Mask 0: this time section is not used.
Mask 1: this time section is used.
Example:
TimeSection[1][0]=1 12:00:00-18:00:00
Means EventHandler is effective between 12:00:00 and 18:00:00 at
Monday.
handlerName.EventHandler.TipEnable
bool
handlerName.EventHandler. ExAlarmOutEnable
bool
handlerName. ExAlarmOutChannels[channels]
integer
Enable/Disable local message box tip.
6.2Alarm
6.2.1 GetAlarmConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Alarm
Comment
Response
table.Alarm[0].Enable=false
table.Alarm[0].EventHandler.(output of EventHandler is described in 6.1.1 GetEventHandler)
table.Alarm[0].Name=Door1
table.Alarm[0].SensorType=NC
table.Alarm[1].
6.2.2 SetAlarmConfig
URL Syntax
Comment
In below table, input is external alarm input channel, ch is channel number, wd is weekday index, ts is timesection index.
EventHandler defines parameter of relevant actions when alarm or event happens. Its also used in following sections about
events.
Response
OK or ERROR
ParamName
ParamValue type
Description
Alarm[input].Enable
bool
Enable/Disable alarm from a input channel

49
Alarm[input].EventHandler
Setting of EventHandler is described in 6.1.2 SetEventHandler
Alarm[input].Name
string
Name of alarm input channel.
Alarm[input].SensorType
string
Range is {NC, NO].

NC: normal close
NO: normal open
6.2.3 GetAlarmOutConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=AlarmOut
Comment
alarmOutChannel below is the alarm out channel index.
Response
table.AlarmOut[alarmOutChannel].Mode=0
table.AlarmOut[alarmOutChannel].Name=Beep
6.2.4 SetAlarmOutConfig
URL Syntax
Comment
Port in below table is alarm out port index, start form 0.
Response
OK or ERROR
ParamName
ParamValue type
Description
AlarmOut[port].Mode
integer
Range is {0, 1, 2}
0: automatically alarm
1: force alarm
2: close alarm
AlarmOut[port].Name
string
Alarm out port name.
6.2.5 GetInSlots
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getInSlots
Comment
Get alarm input channel number.

Below response means there are 2 alarm input channels.
Response
result=2

50
6.2.6 GetOutSlots
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getOutSlots
Comment
Get alarm output channel number.
Response
result=1
6.2.7 GetInState
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getInStates
Comment
Get alarm input state for all channels.

A bit in the response result indicates a channel alarm states, below result 3 means alarm channel 1 and channel 2 have
alarm now.
Response
result=3
6.2.8 GetOutState
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getOutStates
Comment
Get alarm output state for all channels.

A bit in the response result indicates a channel. 1 means alarm is present.
Response
result=0
6.2.9 GetChannelInState
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getInStates&channel=<channelNo>
Comment
Get alarm input state for channelNo. channelNo starts from 0, and must be less than alarm input channels obtained from
6.2.5 GetInSlots.
Result 1 means alarm is present. Result 0 means alarm is not present.
Response
result=1
6.2.10 GetChannelOutState
URL Syntax
http://<ip>/cgi-bin/alarm.cgi?action=getOutStates&channel=<channelNo>
Comment
Get alarm output state for channelNo. channelNo starts from 0, and must be less than alarm output channels obtained
from 6.2.6 GetOutSlots .
Result 1 means alarm is present. Result 0 means alarm is not present.

51
Response
result=0
6.3MotionDetect
6.3.1 GetMotionDetectConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=MotionDetect
Comment
MotionDetect config of a video channel contains Enable, Level, Region and EventHandler.
Response
table.MotionDetect[0].Enable=false
table.MotionDetect[0].EventHandler (output of EventHandler is described in 6.1.1 GetEventHandler)
table.MotionDetect[0].Level=3
table.MotionDetect[0].Region[0]=3932160
table.MotionDetect[0].Region[1]=3932160
table.MotionDetect[0].MotionDetectWindow[0].Id=0
table.MotionDetect[0].MotionDetectWindow[0].Name=Region0
table.MotionDetect[0].MotionDetectWindow[0].Sensitive=58
table.MotionDetect[0].MotionDetectWindow[0].Threshold=4
table.MotionDetect[0].MotionDetectWindow[0].Region[0]=3932160
table.MotionDetect[0].MotionDetectWindow[0].Region[1]=3932160
table.MotionDetect[1]
6.3.2 SetMotionDetectConfig
URL Syntax
Comment

LineNum
Index of region, region is divided into lines and each line has several blocks, a line is described by a 32 bit integer, a bit for
a block..
0=Line 1
1=Line 2
WinNum
Index of detect window, there are 4 detect windows at present. Each window is divided into 18 lines and 22 blocks/line.
MotionDetectWindow is available with firmware 2.212 and above.
RegionIndex
It is similar with LineNum,but is beyond to a detect window.

52
Head = MotionDetect[Channel]
The italics below will be replaced by the above abbreviations.
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Enable
bool
Enable/Disable motion detect feature in a channel.
head.EventHandler
head.Level

integer
Range is [1-6].
Sensitivity of motion detection.
1: lowest sensitivity.
6: highest sensitivity.
head.Region[LineNum]
integer
Currently, region is divided into 18 lines and 22 blocks/line.

A bit describes a block in the line.
Bit = 1: motion in this block is monitored..
This filed is used to compatible with the previous firmware. It can be instead by
head. MotionDetectWindow[WinNum].
Example:
MotionDetect[0].Region[0] = 4194303 (0x3FFFFF):: motion in channel 0 line 0s
22 blocks is monitored.
MotionDetect[0].Region[1] =0: motion in line 1s 22 blocks is not monitored.
MotionDetect[0].Region[17] = 3: in the last line of channel 0, motion in the left
two blocks is monitored.
head.MotionDetectWindow
integer
It is the Id of a detect window.
string
It is the name of a detect window.
integer
Range is [0-100].
[WinNum].Id
[WinNum].Name
[WinNum].Sensitive
It presents more sensitive if the value is larger.

integer
[WinNum]. Threshold
Range is [0-100].
It presents the threshold value when trigger motion detect.
integer
It is similar with head.Region[LineNum].
[WinNum]. Region[RegionIndex]
6.4BlindDetect
6.4.1 GetBlindDetectConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=BlindDetect
Comment
Channel: video channel number

head= table.BlindDetect[Channel]
Response
head.Enable=false

53
head.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)

head.Level=3
6.4.2 SetBlindDetectConfig
URL Syntax
Comment

head=BlindDetect[Channel]
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Enable
bool
Enable/Disable blind detect feature.
head.EventHandler
head.Level

integer
Range is [1-6].
Sensitivity of blind detection.
1: lowest sensitivity.
6: highest sensitivity.
6.5LossDetect
6.5.1 GetLossDetectConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=LossDetect
Comment

head=table.BlindDetect[Channel]
Response
head.Enable=false
6.5.2 SetLossDetectConfig
URL Syntax
Comment

Head = BlindDetect[Channel]
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Enable
bool
Enable/Disable loss detect feature.
head.EventHandler

54
6.6LoginFailureAlarm
6.6.1 GetLoginFailureAlarmConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=LoginFailureAlarm
Comment

head=table.LoginFailureAlarm
Response
head.Enable=false
6.6.2 SetLoginFailureAlarmConfig
URL Syntax
Comment
Head=LoginFailureAlarm
Response
OK or ERROR
ParamName
ParamValue type
Description
head.Enable
bool
Enable/Disable notify LoginFailure event.Now this event can be linked

with send email and alarm out.The max try login times can be configured
in chapter 9.1.2 SetGeneralConfig.
head.EventHandler
6.7 StorageAbnormal
6.7.1 GetStorageNotExistConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=StorageNotExist
Comment
Response
StorageNotExist.Enable=false
StorageNotExist.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)
6.7.2 SetStorageNotExistConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
StorageNotExist.Enable
bool

55
StorageNotExist.EventHandler
6.7.3 Get StorageFailureConfig

URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name= StorageFailure
Comment
Response
StorageFailure.Enable=false
StorageFailure.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)
6.7.4 Set StorageFailureConfig

URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
StorageFailure.Enable
bool
StorageFailure.EventHandler
6.7.5 GetStorageLowSpaceConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name= StorageLowSpace
Comment
Response
StorageLowSpace.Enable=false
StorageLowSpace.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)
6.7.6 SetStorageLowSpaceConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
StorageLowSpace.Enable
bool
StorageLowSpace.EventHandler

56
6.8 NetAbnormal
6.8.1 GetNetAbortConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name= NetAbort
Comment
Response
NetAbort.Enable=false
NetAbort.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)
6.8.2 SetNetAbortConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
NetAbort.Enable
bool
NetAbort.EventHandler
6.8.3 GetIPConflictConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name= IPConflict
Comment
Response
IPConflict.Enable=false
IPConflict.EventHandler= (output of EventHandler is described in 6.1.1 GetEventHandler)
6.8.4 SetIPConflictConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue type
Description
IPConflict.Enable
bool
IPConflict.EventHandler

57
6.9 GetEventIndexes
URL Syntax
http://<ip>/cgi-bin/eventManager.cgi?action=getEventIndexes&code=<eventCode>
Comment
Get channels indexes that event of code eventCode happens.

eventCode includes:
Response
VideoMotion:
motion detection event
VideoLoss:
video loss detection event
VideoBlind:
video blind detection event.
AlarmLocal:
alarm detection event.
channels[0]=0
channels[1]=2
channels[2]=3
(This response means event happened on channel 0, channel 2, and channel 3.)
6.10 Attach
URL Syntax
http://<ip>/cgi-bin/eventManager.cgi?action=attach&codes=[<eventCode>,<eventCode> ,]
Comment
Get channels indexes that event of code eventCode happens.

eventCode includes:
VideoMotion: motion detection event
VideoLoss:
video loss detection event
VideoBlind:
video blind detection event.
AlarmLocal:
alarm detection event.
MDResult:
motion detection data reporting event. The motion detect window contains 18 rows and 22 columns. The
event info contains motion detect data with mask of every row.
Response
HTTP Code: 200 OK\r\n

Cache-Control: no-cache\r\n
Pragma: no-cache\r\n
Expires: Thu, 01 Dec 2099 16:00:00 GMT\r\n
Connection: close\r\n
Content-Type: multipart/x-mixed-replace; boundary=<bondary>\r\n
Body:
--<bondary>\r\n
Content-Type: text/plain\r\n
Content-Length: <data length>\r\n
<eventInfo>\r\n\r\n
--<bondary>\r\n
Content-Length: <data length>\r\n
<eventInfo>\r\n\r\n

58
For example:
HTTP Code: 200 OK\r\n
Cache-Control: no-cache\r\n
Pragma: no-cache\r\n
Expires: Thu, 01 Dec 2099 16:00:00 GMT\r\n
Connection: close\r\n
Content-Type: multipart/x-mixed-replace; boundary=myboundary\r\n\r\n
Body:
-- myboundary \r\n
Content-Length: 39\r\n
Code=VideoMotion;action=Start;index=0\r\n\r\n
-- myboundary \r\n
Code=VideoBlind;action=Start;index=0\r\n\r\n
-- myboundary \r\n
Code= AlarmLocal;action=Start;index=0\r\n\r\n
-- myboundary \r\n
Code= MDResult;action=Pulse;index=0;data=61708863,61708863\r\n\r\n
-- myboundary \r\n
7.PTZ
7.1PTZConfig
7.1.1 GetPTZConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Ptz
Comment
Port in below table is PTZ port index, start form 0.
Response
table.Ptz[port].Address=8
table.Ptz[port].Attribute[0]=115200
table.Ptz[port].Attribute[2]=Even
table.Ptz[port].Homing[0]=0

59
table.Ptz[port].Homing[1]=30
table.Ptz[port].NumberInMatrixs=0
table.Ptz[port].ProtocolName=NONE
7.1.2 SetPTZConfig
URL Syntax
Comment
Port in below table is PTZ port index, start form 0.
Response
OK or ERROR
ParamName
ParamValue type
Description
Ptz[port].Address
integer
Range is [0-255].
Device address, if there are more than one device connected to
this port, distinguish them by this address.
Ptz[port].Attribute[0]
integer
Range is {1200, 2400 ,4800, 9600, 19200, 38400, 57600,

115200}.
Baudrate
integer
Range is {4, 5, 6, 7, 8}.

Data bit.
string
Range is {Even, Mark, None, Odd, Space}.

Parity verification mode.
float
Range is {1, 1.5, 2}.

Stop bit.
Ptz[port].Homing[0]
integer
Range is {-1,0-255}
-1: homing is disabled.
[0-255]: preset point number
Ptz[port].Homing[1]
integer
Range is [0-65535].
No operation timeout, unit is seconds.
After no operation timeout, PTZ go to preset point set in
Ptz[port].Homing[0].
Ptz[port].ProtocolName
string
PTZ protocol name, depends on PTZ capability,

refer to 7.2.1 GetProtocolList to get the protocol list.

60
7.2PTZControl
7.2.1 GetProtocolList
URL Syntax
http://<ip>/cgi-bin/ptz.cgi?action=getProtocolList
Comment
Get PTZ protocol list.

Response contains all support PTZ protocols separated by comma.
Response
result=NONE,AD1641M,ADMATRIX,BANKNOTE,DH-CC440,DH-MATRIX,DH-SD1,DH-SD2,HAIYU,HY,LILIN,PANASONIC
7.2.2 GetCurrentProtocolCaps
URL Syntax
http://<ip>/cgi-bin/ptz.cgi?action=getCurrentProtocolCaps&channel=<channelNo>
Comment
Get PTZ protocol list, channelNo is PTZ channel index.
Response
caps.AlarmLen=0
caps.AuxMax=8
caps.AuxMin=1
caps.CamAddrMax=255
caps.CamAddrMin=1
caps.Interval=200
caps.Menu=false
caps.MonAddrMax=255
caps.MonAddrMin=0
caps.Name=DH-SD1
caps.PanSpeedMax=255
caps.PanSpeedMin=1
caps.PatternMax=5
caps.PatternMin=1
caps.PresetMax=80
caps.PresetMin=1
caps.TileSpeedMax=255
caps.TileSpeedMin=1
caps.TourMax=7
caps.TourMin=0
caps.Type=1
Field in response
Description
AlarmLen
Alarm length in protocol
AuxMax
Maximum/Minimum number for auxiliary functions
AuxMin

61
CamAddrMax
Maximum/Minimum channel address
CamAddrMin
Menu
True or false, support internal menu of the PTZ or not,
MonAddrMax
Maximum/Minimum monitor address
MonAddrMin
Name
Name of the operation protocol
PanSpeedMax
Maximum/Minimum pan speed.
PanSpeedMin
PatternMax
Maximum/Minimum pattern path number.
PatternMin
PresetMax
Maximum/Minimum preset point number.
PresetMin
TileSpeedMax
Maximum/Minimum tile speed.
TileSpeedMin
TourMax
Maximum/Minimum tour path number.
TourMin
Type
Type of PTZ protocol.
7.2.3 PTZ control commands

URL Syntax
http://<ip>/cgi-bin/ptz.cgi?action=[action]&channel=[ch]&code=[code]&arg1=[argstr]& arg2=[argstr]&arg3=[argstr]
Comment
This URL is used to start/stop PTZ control command.

action is PTZ control command, it can be start or stop.
ch is PTZ channel range is [0 - n-1], code is PTZ operation, and arg1, arg2, arg3 is the arguments of operation.
Code and argstr values are listed in below table.
Response
OK or ERROR
Code
Code description
arg1
arg2
arg3
arg4
Up
Tile up
Vertical speed,
range is [1-8]
Down
Tile down
Vertical speed,
range is [1-8]
Left
Pan left
Vertical speed,
range is [1-8]
Right
Pan right
Vertical speed,
range is [1-8]
ZoomWide
Zoom out
multiple
ZoomTele
Zoom in
multiple
FocusNear
Focus near
multiple
FocusFar
Focus far
multiple
IrisLarge
Aperture larger
multiple
IrisSmall
Aperture smaller
multiple

62
GotoPreset
Go to PTZ preset point
Preset point
1: start
number
SetPreset
Set PTZ preset point
Preset point
number
ClearPreset
Clear PTZ preset point
Preset point
number
LampWaterClear
1: open
2: close
StartTour
Start PTZ tour
Tour path
number
2: automatically
3: stop
LeftUp
RightUp
LeftDown
RightDown
AddTour
DelTour
ClearTour
Pan left and tile up
Vertical speed,
Horizontal speed,
range is [1-8]
range is [1-8]
Vertical speed,
Horizontal speed,
range is [1-8]
range is [1-8]
Vertical speed,
Horizontal speed,
range is [1-8]
range is [1-8]
Vertical speed,
Horizontal speed,
range is [1-8]
range is [1-8]
Tour path
Preset point
number
number
Delete preset point from tour
Tour path
Preset point
path
number
number
Clear tour path
Tour path
Pan right and tile up
Pan left and tile down
Pan right and tile down
Add preset point to tour path
number
AutoPanOn
Start pan rotate
AutoPanOff
Stop pan rotate
SetLeftLimit
Set left limit.
SetRightLimit
Set right limit.
AutoScanOn
Start auto scan.
AutoScanOff
Stop auto scan.
SetPatternBegin
Begin pattern path set.
Pattern number
SetPatternEnd
End pattern path set.
Pattern number
StartPattern
Run pattern path
Pattern number
StopPattern
Stop pattern path
Pattern number
ClearPattern
Clear pattern path
Pattern number
AlarmSearch
Search alarm.
Position
Go to position
Horizontal
Vertical position
Zoom change
position
AuxOn
Auxiliary function on, auxiliary

function is defined in product
definition document.
AuxOff
Menu
Auxiliary function off

63
Exit
Enter
Esc
MenuUp
MenuDown
MenuLeft
MenuRight
Preset point
Preset point title.
External alarm
Link type
Argument of link
input channel.
1: go to preset
type:
point
Link type = 1,
2: auto scan
this is preset point
3: tour
number
Reset
Restore default configuration.
SetPresetName
number (1 byte)
AlarmPtz
Alarm linked PTZ.
Link type = 2,
this is auto scan
path
Link type = 3,
this is tour path
LightController
Control the light on/off.
Address of light
Light number
switch
Horizontal angle:
Vertical
Zoom in mutiple
Speed[1-8], not
0-360
angle :0-90
controller
PositionABS
PositionReset
Go to ABS position
Use current direction as
must
reference.
UpTele
up + TELE
Speed [1-8]
DownTele
down + TELE
Speed [1-8]
LeftTele
left + TELE
Speed [1-8]
RightTele
right + TELE
Speed [1-8]
LeftUpTele
leftup + TELE
Speed [1-8]
LeftDownTele
leftdown + TELE
Speed [1-8]
RigjtUpTele
rightup + TELE
Speed [1-8]
RightDownTele
rightdown + TELE
Speed [1-8]
UpWide
up + WIDE
Speed [1-8]
DownWide
down + WIDE
Speed [1-8]
LeftWide
left + WIDE
Speed [1-8]
RightWide
right + WIDE
Speed [1-8]
LeftUpWide
leftup + WIDE
Speed [1-8]
LeftDownWide
leftdown + WIDE
Speed [1-8]
RightUpWide
rightup + WIDE
Speed [1-8]
RightDownWide
rightdown + WIDE
Speed [1-8]
Continuously
Move Continuously
Horizontal Speed
Vertical Speed
Zoom Speed [-8-8]
Timeout

64
Relatively
Move Relatively
[-8-8]
[-8-8]
Relatively angle:
Relatively
0-360
angle :0-90
Relatively
Zoom
7.3PTZStatus
7.3.1 PTZ GetStatus
URL Syntax
http://<ip>/cgi-bin/ptz.cgi?action=getStatus
Comment
This URL is used to get PTZStatus.
Response
status.UTC=6538920
status.MoveStatus=Idle
status.ZoomStatus=Idle
status.PresetID=10
status.Position=120,12,2
8.Record&Snap
8.1Record
8.1.1 GetRecordConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Record
Comment
Channel in below table is video channel number, weekday range is [0-6] (Sunday - Saturday).
Record config contains pre record time and record time sections of every day.
Response
table.Record[channel].PreRecord=6
table.Record[channel].HolidayEnable=true
table.Record[channel].TimeSection[weekday][0]=1 00:00:00-24:00:00

65
8.1.2 SetRecordConfig
URL Syntax
Comment
In below table: ch = channel index, wd = week day index, ts = time section index
Response
OK or ERROR
ParamName
ParamValue type
Description
Record[ch].PreRecord
integer
Range is [0-300].
Prerecord seconds, 0 means no prerecord.
ch (Channel number) starts form 0
Record[ch]. HolidayEnable
bool
Record or not when a day is a holiday setted is chapter 8.4 Holiday.
Record[ch].TimeSection[wd][ts]
string
wd (week day) range is [0-6] (Sunday - Staurday)

ts (time section) range is [0-23], timesection table index.
Mask: [0-65535], hh: [0-24], mm: [0-59], ss: [0-59]
Mask indicates record type by bits:
Bit0: regular record
Bit1: motion detection record
Bit2: alarm record
Bit3: card record
Example:
Set record time to every Sunday all day. Record type is motion detection and alarm.
URL should be:
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&name=Record[0].TimeSection[0][0]&table=6 00:00:00-24:00:00
In this example, 6 00:00:00-24:00:00 means motion detection and alarm record all day (6 = 4 & 2, alarm is 4, motion detection is 2.).
8.1.3 GetRecordModeConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=RecordMode
Comment
Get record mode for video channels. channel in below table is video channel number.
Response
table.RecordMode[channel].Mode=0
8.1.4 SetRecordModeConfig
URL Syntax
Comment
channel in below table is video channel index, start form 0.
Response
OK or ERROR

66
ParamName
ParamValue type
Description
RecordMode[channel].Mode
integer
Range is {0, 1, 2}.

0: automatically record
1: manually record
2: stop record.
8.2Snap
8.2.1 GetSnapConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Snap
Comment
Channel in below table is video channel number, weekday range is [0-6] (Sunday - Saturday).
Response
table.Snap [channel].HolidayEnable=true
table.Snap[channel].TimeSection[weekday][0]=1 00:00:00-24:00:00
8.2.2 SetSnapConfig
URL Syntax
Comment
In below table: ch = channel index, wd = week day index, ts = time section index
Response
OK or ERROR
ParamName
ParamValue type
Description
Snap [ch].HolidayEnable
bool
Snap or not when a day is a holiday setted is chapter 8.4 Holiday.
Snap[ch].TimeSection[wd][ts]
string
wd (week day) range is [0-6] (Sunday- Staurday)

ts (time section) range is [0-23], its timesection table index.
Mask: [0-65535], hh: [0-24], mm: [0-59], ss: [0-59]
Mask indicates record type by bits:
Bit0: regular snapshot
Bit1: motion detection snapshot

67
Bit2: alarm snapshot

Bit3: card snapshot
:
8.3MediaGlobal
8.3.1 GetMediaGlobalConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=MediaGlobal
Description
Response
table.MediaGlobal.SnapFormatAs=MainFormat
8.3.2 SetMediaGlobalConfig
URL Syntax
Comment
It presents obtaining snap stream from Main stream or extra stream.
Response
OK or ERROR
ParamName
ParamValue type
Description
MediaGlobal.SnapFormatAs
string
The range is {MainFormat, ExtraFormat}
8.4Holiday
8.4.1 GetHolidayConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Holiday
Description
Get holiday config for record or snap.
Response
table.Holiday.MonthMask[0]=3
table.Holiday.MonthMask[9]= 1610612739

68
8.4.2 SetHolidayConfig
URL Syntax
Comment
monthIndex presents the index of a month. 0 presents January, 1 presents February, 11 presents December.
Response
OK or ERROR
ParamName
ParamValue type
Description
Holiday.MonthMask[monthIndex]
integer
It is the mask of a month.Every bit present a day. For example, 0x0001

presents the first day of a month is holiday.0x0002 presents the second
day of a month is holiday, 0x0003 presents the first day and second day
of a month is holiday.
9.System
9.1General
9.1.1 GetGeneralConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=General
Comment
Response
table.General.MachineName=CPPLUS001
table.General. LocalNo=8
table.General. MachineAddress=binjiangqv jiangnandadao weiyelu
table.General. MachineGroup=jiaojing yidui
table.General.LockLoginEnable=true
table.General.LockLoginTimes=3
table.General.LoginFailLockTime=1800
9.1.2 SetGeneralConfig
URL Syntax
Comment

69
Response
OK or ERROR
ParamName
ParamValue type
Description
General.MachineName
string
Device name or serial number.
General. LocalNo
integer
General. MachineAddress
string
General. MachineGroup
string
General. LockLoginEnable
bool
Whether support lock login times setting.
General. LockLoginTimes
integer
Max try times of login failed, when exceeding the

times the device will be locked and alarm.
General. LoginFailLockTime
integer
Lock login seconds.
9.2SystemTime
9.2.1 GetCurrentTime
URL Syntax
http://<ip>/cgi-bin/global.cgi?action=getCurrentTime
Comment
The time format is "Y-M-D H-m-S". Its not be effected by Locales.TimeFormat in 9.3.2 SetLocalesConfig.
Response
result = 2011-7-3 21:02:32
9.2.2 SetCurrentTime
URL Syntax
http://<ip>/cgi-bin/global.cgi?action=setCurrentTime&time=2011-7-3%2021:02:32
Comment
The time format is "Y-M-D H-m-S". Its not be effected by Locales.TimeFormat in 9.3.2 SetLocalesConfig.
Response
OK or ERROR
9.3Locales
9.3.1 GetLocalesConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Locales
Comment
Response
table.Locales.DSTEnable=false
table.Locales.DSTEnd.Day=1
table.Locales.DSTEnd.Hour=0
table.Locales.DSTEnd.Minute=0

70
table.Locales.DSTEnd.Month=1
table.Locales.DSTEnd.Week=2
table.Locales.DSTEnd.Year=2011
table.Locales.DSTStart.Day=0
table.Locales.DSTStart.Hour=0
table.Locales.DSTStart.Minute=0
table.Locales.DSTStart.Month=1
table.Locales.DSTStart.Week=1
table.Locales.DSTStart.Year=2011
table.Locales.TimeFormat=yyyy-MM-dd HH:mm:ss
9.3.2 SetLocalesConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue
Description
type
Locales.DSTEnable
bool
Enable/Disable DST (daylight saving time)
Locales.DSTEnd.Day
integer
Range is [0-6] or [1-31]

[0-6]: week day, 0 = Sunday, 6 = Saturday
[1-31]: month day
If Locales.DSTEnd.Week is 0, use month day, otherwise, use week day.
Locales.DSTEnd.Hour
integer
Range is [0-23]
Locales.DSTEnd.Minute
integer
Range is [0-59]
Locales.DSTEnd.Month
integer
Range is [1-12]
Locales.DSTEnd.Week
Integer
Range is {1,2,3,4,-1,0}.
0 = Use month day
[1,2,3,4,-1]: use week day.
1 = first week, 2 = second, 3 = third, 4 = fourth, -1 = last.
Locales.DSTEnd.Year
Integer
Range is [2000-2038]
Locales.DSTStart.Day
Range is the same with items in Locales.DSTEnd
Locales.DSTStart.Hour
Locales.DSTStart table and Locales.DSTEnd table together defines the
Locales.DSTStart.Minute
time range of DST.
Locales.DSTStart.Month
Locales.DSTStart.Week
Locales.DSTStart.Year
Locales.TimeFormat
string
Defines time format displayed in video time title.

String form is: year-month-day hour:mm:ss.

71
Position of year, month and day can be exchanged.

Range of year is {yy, yyyy}
yy = year without century, yyyy = year with century.
Range of month is {M, MM, MMMM}
M = 1 for January, MM = 01 for January, MMMM = Jan for January
Range of day is {d, dd}
d = 1 for first day, dd = 01 for first day
Range of hour is {H, HH, h, hh}
H = 1 for 1:00, HH = 01 for 1:00, range is 0-23
h = 1 for 1:00, hh = 01 for 1:00, time range is 1-12
Example:
yyyy-MM-dd HH:mm:ss or
MM-dd-yyyy HH:mm:ss or
dd-M-yy hh:mm:ss
9.4Language
9.4.1 GetLanguageCaps
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getLanguageCaps
Comment
Get the list of supported languages, response is a string contains languages with comma separated.
Languages include
{English, SimpChinese, TradChinese, Italian, Spanish, Japanese, Russian, French, German]
Response
Languages=SimpChinese,English,French
9.4.2 GetLanguageConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=Language
Comment
Get current system language cofnig.
Response
table.Language=SimpChinese

72
9.4.3 SetLanguageConfig
URL Syntax
Comment
NOTE: After changing language setting, system will automatically reboot!
Response
OK or ERROR
ParamName
ParamValue type
Description
Language
string
The language range is get from interface in 9.3.1 GetLanguageCaps
9.5AccessFilter
9.5.1 GetAccessFilterConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=AccessFilter
Comment
bannedIndex below is the banned IP list index,

trustIndex below is the trust IP list index.
Response
table.AccessFilter.BannedList[bannedIndex]=10.6.10.1
table.AccessFilter. TrustList[trustIndex]=1.2.3.4
table.AccessFilter.Enable=false
table.AccessFilter.Type=BannedList
9.5.2 SetAccessFilterConfig
URL Syntax
Comment
Range of index in below table is [0-255]
Response
OK or ERROR
ParamName
ParamValue type
Description
AccessFilter.BannedList[index]
string
Banned IP address list
AccessFilter.TrustList[index]
string
Trusted IP address list
AccessFilter.Enable
bool
Enable/Disable access filter function
AccessFilter.Type
string
Range is {TrustList, BannedList},

TrustList: Turst list is used, banned list is not used.
BannedList: Banned list is used, turst list is not used.

73
9.6AutoMaintain
9.6.1 GetAutoMaintainConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=AutoMaintain
Comment
Response
table.AutoMaintain. AutoRebootDay=3
table.AutoMaintain. AutoRebootHour=0
table.AutoMaintain. AutoRebootMinute=0
table.AutoMaintain. AutoShutdownDay=1
table.AutoMaintain. AutoShutdownHour=0
table.AutoMaintain. AutoShutdownMinute=0
table.AutoMaintain. AutoStartUpDay=1
table.AutoMaintain. AutoStartUpHour=2
table.AutoMaintain. AutoStartUpMinute=0
9.6.2 SetAutoMaintainConfig
URL Syntax
Comment
Response
OK or ERROR
ParamName
ParamValue
Description
type
AutoMaintain. AutoRebootDay
integer
Range is [-1-7].
Auto restart day.
-1 = never auto restart
0- 6 = Sunday-Saturday
7 = restart every day
AutoMaintain. AutoRebootHour
integer
Range is [0-23].
Auto restart hour
AutoMaintain. AutoRebootMinute
integer
Range is [0-59].
Auto restart minute
AutoMaintain. AutoShutdownDay
integer
Auto reboot time.

Range is same with AutoOpenDay, AutoOpenHour, AutoOpenMinute.
AutoMaintain. AutoShutdownHour
AutoMaintain. AutoShutdownMinute
AutoMaintain. AutoStartUpDay
integer
Auto shutdown time.

74
AutoMaintain. AutoStartUpHour
Range is same with AutoOpenDay, AutoOpenHour, AutoOpenMinute.
AutoMaintain. AutoStartUpMinute
9.7UserManager
9.7.1 Group
There are two user groups: admin and user. The admin group has all the authorities of operating the IP Camera. The user group
only has monitor and replay authorities.
9.7.2 GetGroupInfo
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=getGroupInfo&name=<groupName>
Comment
Get group setting with name groupName.

The range of groupName is: admin and user.
Response
group.Name=admin
group.Memo=administrator group
goup. AuthorityList=<authList>
9.7.3 GetGroupInfoAll
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=getGroupInfoAll
Comment
Get information of all groups.
Response
group[0].Name=admin
group[0].Memo=administrator group
group[0]. AuthorityList=<authList>
group[1].Name=user
group[1].Memo=user group
group[1]. AuthorityList=<authList>
group[2].
9.7.4 AddUser
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=addUser&

75
user.Name=<userName>&
user.Password=<userPassword>&
user.Memo=<userMemo>&
user.Group=<userGroup>&
user.Reserved=<userReserved>&
user.Sharable=<userSharable>
user.AuthList=<authList>
Comment
user.Group: string, the range is admin and user. In different group, the user has different authorities.
user.Sharable: bool, true means allow multi-point login.
User.Reserved: bool, true means this user cant be deleted.
User.AuthList;.
For example:
Add a user of name operator, password 123456, belongs to group user, and allow multi-point login.
http://<ip>/cgi-bin/userManager.cgi?action=addUser&user.Name=operator&user.Password=123456&user.Group=user&us
er.Sharable=true&user.Reserved=false&user.AuthList= CtrlPanel,ShutDown, Record,Backup
Response
OK or ERROR
9.7.5 DeleteUser
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=deleteUser&name=<userName>
Comment
Delete user with name username.
Response
OK or ERROR
9.7.6 ModifyUser
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=modifyUser&
name=<oldUserName>&
user.Name=<userName>&
user.Password=<userPassword>&
user.Memo=<userMemo>&
user.Group=<userGroup>&
user.Reserved=<userReserved>&
user.Sharable=<userSharable>
user.AuthList=<authList>
Comment
Value range of parameters in <> is the same with 9.7.4 AddUser
Response
OK or ERROR

76
9.7.7 ModifyPassword
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=modifyPassword&name=<username>&pwd=<newPwd>&pwdOld=<oldPwd>
Comment
Modify user password, old password oldPwd should be supplied, new password is newPwd.
Response
OK or ERROR
9.7.8 GetUserInfo
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=getUserInfo&name=<userName>
Comment
Get use information with name userName
Response
user.Name=admin
user.Memo=admin 's account
user.Group=admin
user.Reserved=true
user.Sharable=true
user. AuthList=<authList>
9.7.9 GetUserInfoAll
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=getUserInfoAll
Comment
Get information of all users.
Response
users[0].Group=admin
users[0].Id=1
users[0].Memo=admin 's account
users[0].Name=admin
users[0].Reserved=true
users[0].Sharable=true
users[0]. AuthList=<authList>
users[1].Group=admin
9.7.10 GetActiveUserInfoAll
URL Syntax
http://<ip>/cgi-bin/userManager.cgi?action=getActiveUserInfoAll
Comment
Get active users.
Response
users[0].name=admin
users[0].ip=10.43.2.16
users[0].group=admin

77
users[0].clienttype=web3.0
users[0].logintime=2011-11-08 09:51:03
9.8System Operation
9.8.1 Reboot
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=reboot
Comment
Reboot the device. If successful, response OK. If fail, response ERROR.
Response
OK or ERROR
9.8.2 Shutdown
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=shutdown
Comment
Shutdown the device. If successful, response OK. If fail, response ERROR.
Response
OK or ERROR
9.8.3 GetDeviceType
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getDeviceType
Comment
Get the device type.
Response
type=CP-UNC-BY20C
9.8.4 GetHardwareVersion
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getHardwareVersion
Comment
Get the device hardware version
Response
version=1.00
9.8.5 GetSerialNo
URL Syntax
http://<ip> /cgi-bin/magicBox.cgi?action=getSerialNo
Comment
Get the device serial number
Response
sn=YZC0GZ05100020

78
9.8.6 GetMachineName
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getMachineName
Comment
Get the device machine name.
Response
name=YZC0GZ05100020
9.8.7 GetSystemInfo
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getSystemInfo
Comment
Get the system information.
Response
serialNumber=YZC0GZ05100020
deviceType=CP-UNC-BY20
hardwareVersion=1.00
9.8.8 GetVendor
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getVendor
Comment
Get the vendor information.
Response
vendor=CPPLUS
9.8.9 GetSoftwareVersion
URL Syntax
http://<ip>/cgi-bin/magicBox.cgi?action=getSoftwareVersion
Comment
Get software information.
Response
version=2.212.0000.0.R,build:2013-11-14
9.9 Log
9.9.1 StartFind
URL Syntax
http://<ip>/cgi-bin/log.cgi?action=startFind&condition.StartTime=<start>&condition.EndTime=<end>
Comment
Start to find log, in response, there is a token for further log finding process.
start/end: the start/end time of log. Format is: yyyy-mm-dd hh:mm:ss.
Example:
Find log between 2011-1-1 12:00:00 and 2011-1-10 12:00:00, URL is:
http://<ip>/cgi-bin/log.cgi?action=startFind&condition.StartTime=2011-1-1 12:00:00
&condition.EndTime=2011-1-10 12:00:00
Response
token=1

79
9.9.2 DoFind
URL Syntax
http://<ip>/cgi-bin/log.cgi?action=doFind&token=<tokenValue>&count=<logCount>
Comment
Find log with token tokenValue and count logCount

tokenValue is get by startFind in above section, logCount is the count of logs for this query.
The maximum value of logCount is 100.
Response
found=2
items[0].RecNo=789
items[0].Time=2011-05-20 11:59:10
items[0].Type=ClearLog
items[0].User=admin
items[1].Detail.Compression=H.264->MJPG
items[1].Detail.Data=Encode
items[1].RecNo=790
items[1].Time=2011-05-20 11:59:21
items[1].Type=SaveConfig
items[1].User=System
Field in Response
Description
found
Count of found log, found is 0 if no log is found.
User
User name
Type
Log type
Time
Time of this log
RecNo
Log number.
Detail
Log details.
9.9.3 StopFind
URL Syntax
http://<ip>/cgi-bin/log.cgi?action=stopFind&token=<tokenValue>
Comment
Stop query log by token tokenValue
Response
OK or ERROR
9.9.4 Clear
URL Syntax
http://<ip>/cgi-bin/log.cgi?action=clear
Comment
Clear all the logs.
Response
OK or ERROR

80
10.Storage
10.1 File Finding
10.1.1 Create
URL Syntax
http://<ip>/cgi-bin/mediaFileFind.cgi?action=factory.create
Comment
Create a media file finder
Response
result=08137
10.1.2 StartFind
URL Syntax
http://<ip>/cgi-bin/mediaFileFind.cgi?action=findFile&object=<objectId>&condition.Channel=<channel>&condition.StartTime=
<start>&condition.EndTime=<end>&condition.Dirs[0]=<dir>&condition.Types[0]=<type>&condition.Flag[0]=<flag>&condition.E
vents[0]=<event>
Comment
Start to find file wth the above condition. If start successfully, return true, else return false.
object : The object Id is got from interface in 10.1.1 Create
condition.Channel: in which channel you want to find the file .
condition.StartTime/condition.EndTime: the start/end time when recording.
condition.Dirs: in which directories you want to find the file. It is an array. The index starts from 0. The range of dir is
{/mnt/dvr/sda0, /mnt/dvr/sda1}. This condition can be omitted. If omitted, find files in all the directories.
condition.Types: which types of the file you want to find. It is an array. The index starts from 0. The range of type is {dav,
jpg, mp4}. If omitted, find files with all the types.
condition.Flags: which flags of the file you want to find. It is an array. The index starts from 0. The range of flag is {Timing,
Manual, Marker, Event, Mosaic, Cutout}. If omitted, find files with all the flags.
condition.Event: by which event the record file is triggered. It is an array. The index starts from 0. The range of event is
{AlarmLocal, VideoMotion, VideoLoss, VideoBlind, Traffic*}. This condition can be omitted. If omitted, find files of all
the events.
Example:
Find file in channel 1, in directory /mnt/dvr/sda0",event type is "AlarmLocal" or "VideoMotion", file type is dav, and time
between 2011-1-1 12:00:00 and 2011-1-10 12:00:00 , URL is:
http://<ip>/cgi-bin/mediaFileFind.cgi?action=findFile&object=08137&condition.Channel=1&conditon.Dir[0]=/mnt/dvr/sda0&
conditon.Event[0]=AlarmLocal&conditon.Event[1]=VideoMotion&condition.StartTime=2011-1-1%2012:00:00&condition.EndTi
me=2011-1-10%2012:00:00
Response
OK or Error

81
10.1.3 FindNextFile
URL Syntax
http://<ip>/cgi-bin/mediaFileFind.cgi?action=findNextFile&object=<objectId>&count=<fileCount>
Comment
Find the next fileCount files.

The maximum value of fileCount is 100.
Response
found=1
items[0]. Channel =1
items[0]. StartTime =2011-1-1 12:00:00
items[0]. EndTime =2011-1-1 13:00:00
items[0]. Type =dav
items[0]. Events[0]=AlarmLocal
items[0]. FilePath =/mnt/dvr/sda0/2010/8/11/dav/15:40:50.jpg
items[0]. Length =790
items[0]. Duration = 3600
items[0].SummaryOffset=2354
tems[0].Repeat=0
items[0].WorkDir=/mnt/dvr/sda0
items[0]. Overwrites=5
items[0]. WorkDirSN=0
Field in Response
Description
found
Count of found file, found is 0 if no file is found.
Channel
Channel
StartTime
Start Time
EndTime
End time
Type
File type
Events
Event type.
FilePath
filepath.
Length
File length
Duration
Duration time
SummaryOffset
Summary offset
Repeat
Repeat file number
WorkDir
The files directory
Overwrites
Overwrite times of the work directory
WorkDirSN
Workdir No
10.1.4 Close
URL Syntax
http://<ip>/cgi-bin/mediaFileFind.cgi?action=close&object=<objectId>
Comment
Stop find.
Response
OK or ERROR

82
10.1.5 Destroy
URL Syntax
http://<ip>/cgi-bin/mediaFileFind.cgi?action=destroy&object=<objectId>
Comment
Destroy the media file finder.
Response
OK or ERROR
10.2 Storage Device

10.2.1 GetStorageDeviceCollect
URL Syntax
http://<ip>/cgi-bin/storageDevice.cgi?action=factory.getCollect
Comment
Get all the storage device names
Response
A list of all device names

list[0]=/dev/sda0
list[1]=/dev/sda1
list[2]=/dev/sg1
10.3 Work Group

10.3.1 GetWorkGroupCollect
URL Syntax
http://<ip>/cgi-bin/workGroup.cgi?action=factory.getCollect
Comment
Get all the work group names
Response
A list of all device names

list [0]=group1
list [1]=group2
list [2]=group3
10.4 Work Directory

10.4.1 GetWorkDirectoryCollect
URL Syntax
http://<ip>/cgi-bin/workDirectory.cgi?action=factory.getCollect
Comment
Get the all work derictory names
Response
A list of all work directory names

list [0]=dir1
list [1]=dir2

83
list [2]=dir3
10.5 NAS
10.5.1 GetNASConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=NAS
Comment
Return all the directories on the NAS server.
Response
table.NAS[0].Name= FTP1
table.NAS[0].Enable = true
table.NAS[0].Protocol =FTP
table.NAS[0].Address =www.cpplusworld.com
table.NAS[0].Port =21
table.NAS[0].UserName =anonymity
table.NAS[0].Password =none
table.NAS[0].Directory =share
10.5.2 SetNASConfig
URL Syntax
Comment
In below table:
Head =NAS[index]
Index: The index of the NAS Server
Response
OK or ERROR
ParamName
ParamValue type
Description
Head.Name
string
NAS name.
Head .Enable
bool
Enable/Disable the NAS.
Head. Protocol
string
The range is {FTP, SMB}
Head. Address
string
The IP address or host name.
Head .Port
integer
NAS port.
Head.UserName
string
NAS username.
Head .Password
string
NAS password.
Head .Directory
string
Directory name.

84
10.6 Storage Point

10.6.1 GetRecordStoragePointConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=RecordStoragePoint
Comment
Response
table.RecordStoragePoint [0].TimingRecord.Local =local

table.RecordStoragePoint [0].TimingRecord. Redundant = Redundant
table.RecordStoragePoint [0].TimingRecord. Remote = FTP
table.RecordStoragePoint [0].TimingRecord. AutoSync = false
table.RecordStoragePoint [0].TimingRecord. AutoSyncRange =0
table.RecordStoragePoint [0].TimingRecord. LocalForEmergency =false
table.RecordStoragePoint [0].TimingRecord. CompressBefore =15
10.6.2 SetRecordStoragePointConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&&<paramName>=<paramValue>[&<paramName>=<paramValue>...]
Comment
In below table:
ch = channel index,
recType :The range is {TimingRecord, VideoDetectRecord, AlarmRecord, EventRecord, TimingSnapShot,
VideoDetectSnapShot, AlarmSnapShot, EventSnapShot}
Response
OK or Error
ParamName
ParamValue type
Description
RecordStoragePoint [ch].[recType].Local
string
Local directory name.
RecordStoragePoint [ch].[recType]. Redundant
string
Redundant directory name.
RecordStoragePoint [ch].[recType]. Remote
string
Remote directory name.
RecordStoragePoint [ch].[recType]. AutoSync
bool
When remote directory recovers, auto synchronize local

directory to remote directory or not.
RecordStoragePoint [ch].[recType]. AutoSyncRange
integer
From the remote directory recovering time, how long the

data needs to be synchronized. The unit is hour. If it is 0, all
the data needs to be synchronized.
RecordStoragePoint [ch].[recType]. LocalForEmergency
bool
When the remote directory is unusable, save the data the

local directory or not.
RecordStoragePoint [ch].[recType]. CompressBefore
integer
How many days data will be compressed.
10.6.3 GetStorageGroupConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=StorageGroup

85
Comment
Response
table.StorageGroup[0]. Name=ReadWrite
table.StorageGroup[0]. Memo = For Reading & Writing Files
table.StorageGroup[0]. FileHoldTime =0
table.StorageGroup[0]. OverWrite =true
table.StorageGroup[0]. Channels[0]. MaxPictures =1000
table.StorageGroup[0]. Channels[0]. Path =/mnt/dvr/sda0
10.6.4 SetStorageGroupConfig
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=setConfig&&<paramName>=<paramValue>[&<paramName>=<paramValue>...]
Comment
In below table:
Index = StorageGroup index
ch = channel index
Response
OK or Error
ParamName
ParamValue type
Description
StorageGroup[Index]. Name
string
Storage group name.
StorageGroup[Index]. Memo
string
Storage group memo.
StorageGroup[Index]. FileHoldTime
integer
How many days the file will be hold.
StorageGroup[Index]. OverWrite
bool
Over write or not when there is not enough storage.
StorageGroup[Index]. Channels[ch]. MaxPictures
Integer
The max pictures beyond which the old pictures will be over
written. If it is 0, the old pictures will be not over written.
StorageGroup[Index]. Channels[ch]. Path
string
The channel path.
11.Audio
11.1 Audio MIME type
MIME
Description
Audio/PCM
Audio/ADPCM
Audio/G.711A
Audio/G.711Mu
Audio/G.726
Audio/G.729
Audio/MPEG2
Audio/AMR
Audio/AAC

86
11.2 Post Audio

URL Syntax
http://<ip>/cgi-bin/audio.cgi?action=postAudio&<paramName>=<paramValue>[&<paramName>=<paramValue>...]
Comment
paramValue as below table.
Response
OK or ERROR
ParamName
ParamValue type
Description
httptype
string
singlepart:HTTP content is a continuous flow of audio

packets
multipart:HTTP
content
type
is
multipart/x-mixed-replace,and each audio packet ends

with a boundary string
channel
integer
The audio channel
11.2.1 Example for singlepart

The RUL of transmit a singlepartchannel 1 audio stream(encoded with G.711 A-law) is:
http: //<ip>/cgi-bin/audio.cgi?action=postAudio&httptype=singlepart&channel=1
example:
POST /cgi-bin/audio.cgi?action=postAudio&httptype=singlepart&channel=1 HTTP/1.1
Content-Type: Audio/G.711A
Content-Length:9999999
<Audio data>
<Audio data>
11.2.2 Example for multipart

The RUL of transmit a multipartchannel 1 audio stream(encoded with G.711 A-law) is:
http: //<ip>/cgi-bin/audio.cgi?action=postAudio&httptype= multipart &channel=1
example:
POST /cgi-bin/audio.cgi?action=postAudio&httptype= multipart &channel=1 HTTP/1.1
Content-Type: multipart/x-mixed-replace; boundary=<boundary>
--<boundary>
Content-Length: 800
<Audio data>
--<boundary>

87
11.3 Get Audio

URL Syntax
http://<ip>/cgi-bin/audio.cgi?action=getAudio&<paramName>=<paramValue>[&<paramName>=<paramValue>...]
Comment
paramValue as below table.
Response
OK or ERROR
ParamName
ParamValue type
Description
httptype
string
singlepart:HTTP content is a continuous flow of audio

packets
multipart:HTTP
content
type
is
multipart/x-mixed-replace,and each audio packet ends

with a boundary string
channel
integer
The audio channel
11.3.1 Example for singlepart

The RUL of Request a singlepartchannel 1 audio stream(encoded with G.711 A-law) is:
http: //<ip>/cgi-bin/audio.cgi?action=getAudio&httptype=singlepart&channel=1
If the request was successful, the server returns a continuous flow of audio packets.The content type is only set at the beginning of the
connection.
Return:
HTTP Code: 200 OK
Body:
<Audio data>
<Audio data>
11.3.2 Example for multipart

The RUL of Request a multipartchannel 1 audio stream(encoded with G.711 A-law) is:
http: //<ip>/cgi-bin/audio.cgi?action=getAudio&httptype=multipart&channel=1
If the request was successful, the server returns a continuous flow of audio packets. The content type is multipart/x-mixed-replace and each
audio packet ends with a boundary string.
Return:
HTTP Code: 200 OK
Content-Type: multipart/x-mixed-replace; boundary=<boundary>
--<boundary>

88
Content-Length: 800
<Audio data>
--<boundary>
12.Appendix
12.1 Stream Format
The Stream format is used by 4.1.7 GetStream By Http and 4.1.8 Playback By Http, describes the format of the data stream.
Stream Header
Byte
Order
Key
Flag
Byte
Order
Key
16
Order
Type reserved
10
17
Key
11
18
19
packet length
12
Extend header
length
channel
Byte
13
14
15
Sequence
20
utc
21
utcms
22
23
reserved
Check
sum
Flag=DH;
Type=0x10 means the audio packet;
Type=0x20 means the video packet;
Packet length means the packet total length, contains the packet header, maybe one or more extend header, and the media data;
Extend Header Format
Byte
Order
Key
0
Type
2
length
3
reserved
data
Extend header length must be multiple of 4 bytes;

89
Audio extend header:
Byte
Order
Key
0x11
reserved
4
Audio
Type
Tracks
Sample
Freq
reserved
A audio packet must contain the audio extend header;

Audio Type:1 - PCM8;2 - G729;3 - IMA_ADPCM;4 - G711U;5 - G721;6 - PCM8_VWIS;7 - MS_ADPCM;8 - G711A;9 - AMR-NB;10 PCM16;11- G723.1;12 AAC;13 - G726_40;14 - G726_32;15 - G726_24;16 - G726_16
Tracks: Tracks number, support 1 and 2;
Sample Freq: audio sample frequence,1 - 4000;2 - 8000;3 - 11025;4 - 16000;5 - 20000;6 - 22050;7 - 32000;8 - 44100;9 - 48000;
Video Extend Header:
Byte
Order
Key
Byte
Order
0x21
Key
16
reserved
10
11
Video
Frame
Type
Type
12
13
I Frame Frame
Interval Rate
Height
Width
14
15
reserved
A video packet must contain the video extend header; Video Type means the video codec type, 1-MPEG4; 2-H.264; Frame Type: 1-I frame;
2-P frame;3-B frame; Width and Height describe the frame width and height by pixel;
Channel Title Extend Header:
Byte
Order
Key
0x22
2
len
Title
reserved
When a stream begin, or the device channel title changes, the video packet must contain the channel title extend header; If the channel
title is Chinese, it only support utf8 format.
TimeZone Extend Header:
Byte
Order
Key
0
0x31
2
8
3
reserved
Time Zone
Daylight reserved
90
saving
time
When a stream begin, or the TimeZone changes, the video packet must contain the TimeZone extend header; Time Zone[0]:
[-12,12](west time zone 12 to east time zone 12), Time Zone[1]
modify the time by minutes; Daylight saving time: 1/0, yes or not in daylight
saving time;
Event Flag Extend Header:
Byte
Order
Key
0x23
2
len
reserved
Event Flag
If the video frame contain one or more event flags, the video packet should contain the Event Flag Extend Header. The event flag means
what event had happened by set the bit as 1;
Event Flag: bit0-exterior alarm; bit1-move detect; bit2-video lost.
13.VedioInput
13.1 AdjustFocus
URL Syntax
http://<ip>/cgi-bin/devVideoInput.cgi?action= adjustFocus&focus=<focus>&zoom=<zoom>
Comment
focus: float, the range is between 0 and 1; -1 means reset to position 0.

zoom: float, the range is between 0 and 1; -1 means reset to position 0.
Response
OK or ERROR
13.2 AdjustFocusContinuously
URL Syntax
http://<ip>/cgi-bin/devVideoInput.cgi?action= adjustFocusContinuously&focus=<focus>&zoom=<zoom>
Comment
focus: float, the range is -1 < focus < 1; 0 means stop.

zoom: float, the range is -1 < zoom< 1; 0 means stop.
The value means the moving speed of motor lens, positive value means move forwards, negative value means move
backwards. This command is used to drive the lens move continuously, until it reaches end. When motor is moving, and you
send this command again with focus or zoom parameter as 0, the motor will stop immediately. In this command when you
adjust the focus parameter, the zoom parameter should be -1, and the focus parameter should be -1 when adjust the zoom
parameter.
Example
If we want to adjust focus, the API like this:

http://172.30.1.100/cgi-bin/devVideoInput.cgi?action=adjustFocusContinuously&focus=0.02&zoom=-1
and when the motor is moving, we send below command to let it stop:
http://172.30.1.100/cgi-bin/devVideoInput.cgi?action=adjustFocusContinuously&focus=0&zoom=-1

91
Response
OK or ERROR
13.3 AutoFocus
URL Syntax
http://<ip>/cgi-bin/devVideoInput.cgi?action= autoFocus
Comment
Response
OK or ERROR
13.4 GetFocusStatus
URL Syntax
http://<ip>/cgi-bin/devVideoInput.cgi?action= getFocusStatus
Comment
The range of status.Status is Normal and Autofocus. This command must be continual executed until status.Status is
Normal.
Response
status.Focus=0.5
status.Zoom=0.5
status.Status=Normal
14. SD Camera
This chapter is only effective with SD Camera.
14.1 VideoInWhiteBalance
14.1.1 GetVideoInWhiteBalance
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInWhiteBalance
Description
Get VideoInWhiteBalance capabilities, channelNo is video in channel index.
Response
table.VideoInWhiteBalance[0][0].ColorTemperatureLevel=50
table.VideoInWhiteBalance[0][0].GainBlue=50
table.VideoInWhiteBalance[0][0].GainGreen=50
table.VideoInWhiteBalance[0][0].GainRed=50
table.VideoInWhiteBalance[0][0].Mode=ATW
table.VideoInWhiteBalance[0][1].Mode=Auto

92
table.VideoInWhiteBalance[0][2].Mode=Auto
14.2.2 SetVideoInWhiteBalance
URL Syntax
Comment
In below table, head =VideoInOptions[ChannelNo] [ConfigNo]

ConfigNo=0,1,2; normal,day,night
Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Mode
integer
Auto,Indoor", "Outdoor", "ATW", "Manual", "AutoOutdoor"
head. GainRed
integer
Range is 0-100
head. GainBlue
integer
Range is 0-100
14.2 VideoInExposure
14.2.1 GetVideoInExposure
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name= VideoInExposure
Description
Response
table.VideoInExposure[0][0].AutoGainMax=2
table.VideoInExposure[0][0].Backlight=0
table.VideoInExposure[0][0].Compensation=7
table.VideoInExposure[0][0].DoubleExposure=0
table.VideoInExposure[0][0].Gain=1
table.VideoInExposure[0][0].GlareInhibition=0
table.VideoInExposure[0][0].Iris=10
table.VideoInExposure[0][0].Mode=0
table.VideoInExposure[0][0].RecoveryTime=900
table.VideoInExposure[0][0].Rect[0]=0

93
table.VideoInExposure[0][0].SlowAutoExposure=0
table.VideoInExposure[0][0].SlowShutter=true
table.VideoInExposure[0][0].SlowSpeed=25
table.VideoInExposure[0][0].Speed=50
table.VideoInExposure[0][0].Value1=0.100000
table.VideoInExposure[0][0].Value2=80
table.VideoInExposure[0][0].WideDynamicRange=0
table.VideoInExposure[0][0].WideDynamicRangeMode=0

94
Comment
In above table, head = table.VideoInOptions[ChannelNo]

14.2.2 SetVideoInExposure
URL Syntax
Comment
In below table, head = VideoInExposure[ChannelNo][ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head.Mode
integer
Range is {0,2,3, 4}
0: AutoExposure
2: Gain first
3: Exposure first
4:Manual.
head.Gain
integer
Range is 0-15
Head.Iris
integer
Range is 0-17
head.Speed
integer
Range is [3,,3000]
head.Compensation
float
Range is [0-14],
head.SlowAutoExposure
float
Range is [0-15]
head.AutoGainMax
integer
Range is {0,1,2}
0: low
1: middle
2: high

95
head.SlowShutter
integer
true: Enable SlowShutter

false: Disable SlowShutter
head.SlowSpeed
integer
Range is {1,2,3,6,12,25}
0:forbid flash
1:always flash
2:auto flash
head.RecoveryTime
integer
Range is {0,300,900, 3600, 7200}, Unit is second.

0:close
head.WideDynamicRangeMode=1
integer
Range is [0,1]
0 disable,
1 enable
head.GlareInhibition
integer
Range is [0,1,2,3]
0disable
1low
2middle
3high
head.Backlight
bool
0: enable Backlight
1: disable Backlight
14.3 VideoInDenoise
14.3.1 GetVideoInDenoise
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInDenoise
Description
Response
table.VideoInDenoise[0][0].2DEnable=true
table.VideoInDenoise[0][0].2DLevel=8
table.VideoInDenoise[0][0].3DAutoType.AutoLevel=2
table.VideoInDenoise[0][0].3DAutoType.Mod=8
table.VideoInDenoise[0][0].3DManulType.SnfLevel=0
table.VideoInDenoise[0][0].3DManulType.TnfLevel=0
table.VideoInDenoise[0][0].3DType=Auto

96
14.3.2 SetVideoInDenoise
URL Syntax
Comment
In below table, head = VideoInDenoise [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head.2DEnable
integer
true: Enable 2D Denoise

false: Disable 2D Denoise
head.2DLevel
integer
Range is 1-5
head.3DType
String
Off
Auto
head .3DAutoType.Mode
integer
Range is 0-1
14.4 VideoInDayNight
14.4.1 GetVideoInDayNight
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInDayNight
Description
Response
table.VideoInDayNight[0][0].BCRDelay=10
table.VideoInDayNight[0][0].ICRDelay=10
table.VideoInDayNight[0][0].Mode=Brightness
table.VideoInDayNight[0][0].Sensitivity=4
table.VideoInDayNight[0][0].Type=Electron
table.VideoInDayNight[0][1].Mode=BlackWhite

97
table.VideoInDayNight[0][2].Mode=BlackWhite
14.4.2 SetVideoInDayNight
URL Syntax
Comment
In below table, head = VideoInDayNight [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Type
integer
Electron:
Mechanism:
head. Mode
integer
AutoColorBlackWhite
head. Sensitivity
integer
Range is 0-7
14.5 VideoInFocus
14.5.1 GetVideoInFocus
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInDayNight
Description
Response
table.VideoInFocus[0][0].FocusLimit=100
table.VideoInFocus[0][0].FocusLimitSelectMode=Manual
table.VideoInFocus[0][0].IRCorrection=0
table.VideoInFocus[0][0].Mode=3
table.VideoInFocus[0][0].Sensitivity=1

98
14.5.2 SetVideoInFocus
URL Syntax
Comment
In below table, head = VideoInDayNight [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Mode
integer
2-Auto focus,3-Half auto focus4-Manual focus
head. FocusLimit
integer
1001000200030005000
head. Sensitivity
integer
Range is 0,1,2
0-high1-default2-low
head. IRCorrection
integer
0 No correcetion 1Correction 2:Auto correction
14.6 VideoInZoom
14.6.1 GetVideoInZoom
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInZoom
Description
Response
table.VideoInZoom[0][0].DigitalZoom=true
table.VideoInZoom[0][0].Speed=7
table.VideoInZoom[0][0].ZoomLimit=4
table.VideoInZoom[0][1].DigitalZoom=true
table.VideoInZoom[0][2].DigitalZoom=false

99
14.6.2 SetVideoInZoom
URL Syntax
Comment
In below table, head = VideoInZoom [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. DigitalZoom
integer
true: Enable DigitalZoom

false: Disable DigitalZoom
head. Speed
integer
Range is 0-7
14.7 VideoInSharpness
14.7.1 GetVideoInSharpness
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInSharpness
Description
Response
table.VideoInSharpness[0][0].Level=4
table.VideoInSharpness[0][0].Mode=1
table.VideoInSharpness[0][0].Sharpness=8
14.7.2 SetVideoInSharpness
URL Syntax

100
Comment
In below table, head = VideoInSharpness [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Sharpness
integer
Range is 0-15
head. Level
integer
Range is 0-15
14.8 VideoInColor
14.8.1 GetVideoInColor
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInColor
Description
Response
table.VideoInColor[0][0].Brightness=50
table.VideoInColor[0][0].ChromaSuppress=1
table.VideoInColor[0][0].Contrast=50
table.VideoInColor[0][0].Gamma=0
table.VideoInColor[0][0].Hue=50
table.VideoInColor[0][0].Saturation=50
table.VideoInColor[0][0].Style=Standard
table.VideoInColor[0][1].Style=Standard
table.VideoInColor[0][2].Style=Flamboyant

101
14.8.2 SetVideoInColor
URL Syntax
Comment
In below table, head = VideoInColor [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Style
integer
Gentle
Standard
Flamboyant
head. Hue
integer
Range is 0-100
head. Brightness
integer
Range is 0-100
head. Saturation
Range is 0-100
head. ChromaSuppress
Range is 0-3
head. Gamma
Range is 0-15
14.9 VideoInRotate
14.9.1 GetVideoInRotate
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInRotate
Description
Response
table.VideoInRotate[0][0].Flip=false
table.VideoInRotate[0][0].Freeze=false
table.VideoInRotate[0][0].Mirror=false
table.VideoInRotate[0][0].Rotate90=0
table.VideoInRotate[0][0].Stable=false

102
14.9.2 SetVideoInRotate
URL Syntax
Comment
In below table, head = VideoInRotate [ChannelNo] [ConfigNo]

Response
OK or ERROR
ParamName
ParamValue
Description
type
head. Flip
integer
true: Enable flip function

false: Disable flip function
14.10 VideoInMode
14.10.1 GetVideoInMode
URL Syntax
http://<ip>/cgi-bin/configManager.cgi?action=getConfig&name=VideoInMode
Description
Response
table.VideoInMode[0].Config[0]=1
table.VideoInMode[0].Mode=0
table.VideoInMode[0].TimeSection[0][0]=0 00:00:00-23:59:59

103
14.10.2 SetVideoInMode
URL Syntax
Comment
In below table, head = VideoInMode [ChannelNo]

Response
ParamName
OK or ERROR
ParamValue
Description
type
head. Mode
integer
Range is {0,1}

104
0: NoSwitch
1: Switch depends on head.TimeSection.
head. Config
integer
Mode=0
Config[0]={01/2}
Mode=1
Config[1]={ 1 }
Config[2]={ 2 }
head.TimeSection[0][0]
integer
The time format is "0 H:m: H:m:S "

For example: 0 00:00:00-10:59:59

105

Cpplus - Unc - Unp - HTTP - Api - For - Ipc-V1 37 PDF

Uploaded by

Copyright:

Available Formats

Cpplus - Unc - Unp - HTTP - Api - For - Ipc-V1 37 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cpplus - Unc - Unp - HTTP - Api - For - Ipc-V1 37 PDF

Uploaded by

Copyright:

Available Formats

CPPLUS UNC/UNP HTTP API FOR IPC

CP Plus GmbH & Co. KG.

Add alarm push and version description

Add ptz control description

Remove 11 GUI and 12 Display

Add Playback,download file in rtsp description in chapter 2012-9-29

Add firmware version description in chapter 1.Add motion 2012-10-29

4.1.5,4.1.6 and monitor and playback in http in chapter 4.1.7

Add vendor description in chapter 9.8.8

data description in chapter 6.9.

Add adjust focus description in chapter 13.

Add RTSP port description in chapter 5.10.

Add VideoInOptions descrition in chapter 4.3.

Modify description in chapter 13.4

Add snap as mainformat or extra format description in 2013-10-26

Add detail description in chapter 13.Add flash light 2013-6-20

Add software version description.

Delete Alarm Server description.

Add SD Camera descpition in chapter 14.

Add custom title description in chapter 4.9.Modify SD 2013-12-17

camera range description in chapter 14. Add Login Failure

CP Plus GmbH & Co. KG.

CP Plus GmbH & Co. KG.

CP Plus GmbH & Co. KG.

CP Plus GmbH & Co. KG.

CP Plus GmbH & Co. KG.

9.7.1 Group ..............................................................................................................................................................................................75

CP Plus GmbH & Co. KG.

CP Plus GmbH & Co. KG.

14.10.1 GetVideoInMode ......................................................................................................................................................................103

3.HTTP API Transaction

The below is an example of a transaction:

Get VideoColor configuration.

In above table, head= table.VideoColor[ChannelNo][ColorConfigNo]

We can also request the single config.

CP Plus GmbH & Co. KG.

<username>: a valid users username.

CP Plus GmbH & Co. KG.

<password> :users password.

true in 4.4.4 SetVideoEncodeConfig.

In above table, the range of table.MaxExtraStream is {1,2,3}

A picture encoded by jpg

video stream encoded by mjpg

CP Plus GmbH & Co. KG.

Its similar with 4.1.1 GetStream.

HTTP Code: 200 OK

4.1.7 GetStream By Http

HTTP Code: 200 OK

4.1.8 Playback By Http

HTTP Code: 200 OK

CP Plus GmbH & Co. KG.

Control the playback stream

In above table, head= table.VideoColor[ChannelNo][ColorConfigNo]

CP Plus GmbH & Co. KG.

In below table, head=VideoColor[ChannelNo][ColorConfigNo]

Brightness, range is [0-100]

Contrast, range is [0-100]

Effective time for this video color config.

Get video input capabilities, channelNo is video in channel index.