Scribd Logo
Upload

Welcome to Scribd!

  • 161 views

    OBM880211 MA5600T VoIP Service Configuration Exercise Guide (H.248) ISSUE 1.00

    Uploaded by

    raef hussien
    This document provides instructions for configuring VOIP services on MA5600T devices. It describes the lab network layout, objectives of configuring VOIP, steps for configuring the MG interface using H.248 and MGCP protocols, and configuring VOIP subscriber information.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    OBM880211 MA5600T VoIP Service Configuration Exercise Guide (H.248) ISSUE 1.00

    Uploaded by

    raef hussien
    161 views10 pages
    This document provides instructions for configuring VOIP services on MA5600T devices. It describes the lab network layout, objectives of configuring VOIP, steps for configuring the MG interface using H.248 and MGCP protocols, and configuring VOIP subscriber information.

    Original Description:

    telecom

    Original Title

    OBM880211 MA5600T VoIP Service Configuration Exercise Guide(H.248) ISSUE 1.00

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for configuring VOIP services on MA5600T devices. It describes the lab network layout, objectives of configuring VOIP, steps for configuring the MG interface using H.248 and MGCP protocols, and configuring VOIP subscriber information.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    161 views10 pages

    OBM880211 MA5600T VoIP Service Configuration Exercise Guide (H.248) ISSUE 1.00

    Uploaded by

    raef hussien
    This document provides instructions for configuring VOIP services on MA5600T devices. It describes the lab network layout, objectives of configuring VOIP, steps for configuring the MG interface using H.248 and MGCP protocols, and configuring VOIP subscriber information.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 10
    At a glance
    Powered by AI
    The key takeaways from the document are how to configure VOIP services including MG interfaces and VOIP users on the Huawei MA5600T device using the MGCP protocol.

    The objectives of configuring VOIP services on the MA5600T are to be familiar with POTS VOIP service, describe the working theory, be skilled at provisioning the service, and obtain ability for maintenance and provisioning of POTS VOIP service.

    The steps to configure an MG interface using the MGCP protocol are to configure the VLAN and uplink, configure the upstream VLAN interface, configure the address pools, configure MGCP as the supported protocol, add and configure the MG interface, and enable the MG interface.

    Revision Record

    Course Code
    OBM880211

    Product
    MA5600T

    Developer/Modifie
    r
    xufei

    Time
    2010-11

    Product Version
    V8R8

    Course Version ISSUE


    ISSUE1.0

    Approver
    zhangjun

    New/Update
    New

    MA5600T VOIP Service Configuration


    Exercise Guide
    ISSUE 1.0

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Table of Contents

    Table of Contents
    Chapter 1 Lab Networking Description.......................................................................................1
    Chapter 2 MA5600T VOIP Service Configuration ......................................................................2
    2.1 Objective........................................................................................................................... 2
    2.2 Task.................................................................................................................................. 2
    2.3 POTS VOIP Service Networking.......................................................................................2
    2.4 VOIP Service Configuration Flow......................................................................................3
    2.5 VOIP Service Configuration Step......................................................................................3
    2.6 MG Interface Configuration............................................................................................... 3
    2.6.1 H.248 protocol MG interface configuration.............................................................3
    2.6.2 MGCP protocol MG interface configuration............................................................5

    Confidential Information of Huawei. No Spreading without Permission

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    1 Lab Networking Description


    Lab Network Layout
    I

    II
    MA5600-1
    PVM:192.168.50.12

    III
    MA5600-2
    PVM:192.168.50.22

    MA5600-3
    PVM:192.168.50.32

    LAN Switch

    II

    III

    192.168.50.13

    192.168.50.14

    192.168.50.23

    192.168.50.24

    192.168.50.33

    192.168.50.34

    192.168.50.15

    192.168.50.16

    192.168.50.25

    192.168.50.26

    192.168.50.35

    192.168.50.36

    NMS Server
    192.168.50.250

    NMS Server
    192.168.50.254

    Confidential Information of Huawei. No Spreading without Permission

    Multicast Server
    192.168.50.37

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    2 MA5600T VOIP Service Configuration


    2.1 Objective
    1)
    2)
    3)
    4)

    Be familiar with POTS VOIP service of MA5600T


    Describe the working theory of the POTS VOIP service
    Be skilled at operation of the POTS VOIP service provisioning
    Obtain the ability for maintenance and provisioning of POTS VOIP service.

    2.2 Task
    1. MG Interface Configuration

    H.248 protocol
    MGCP protocol

    2. VoIP Service Configuration

    2.3 POTS VOIP Service Networking

    Confidential Information of Huawei. No Spreading without Permission

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    2.4 VOIP Service Configuration Flow


    START
    START
    Configure
    Configurethe
    theelectric
    electricswitch
    switch

    MG Interface
    configuration

    Configure the upstream port for


    Configure the
    upstream port for
    VOIP
    VOIP

    Configure
    ConfigureVOIP
    VOIPaddress
    addresspool
    pool
    Add
    AddMG
    MGinterface
    interface
    MG
    MGinterface
    interfacedata
    data
    configuration
    configuration
    Enable
    EnableMG
    MGinterface
    interface
    H.248
    H.248stack
    stack
    parameters
    parameters
    (Optional)
    (Optional)
    Protocol data
    configuration

    SPC
    SPC
    configuration
    configuration
    (Optional)
    (Optional)

    POTS
    POTS
    Customer
    Customerbasic
    basic
    data
    data
    configuration
    configuration

    POTS subscriber data


    configuration

    POTS
    POTScustomer
    customer
    common
    common
    attributes
    attributes
    (Optional)
    (Optional)

    MG
    MGinterface
    interface
    software
    software
    parameters
    parameters
    (Optional)
    (Optional)

    System
    System
    parameters
    parameters
    (Optional)
    (Optional)

    Software parameter
    configuration

    END
    END

    2.5 VOIP Service Configuration Step


    Step1

    Configure the upstream port for VOIP.

    Step2

    Configure VOIP address pool.

    Step3

    Add MG interface

    Step4

    MG interface attribute configuration

    Step5

    Enable MG interface

    Step6

    POTS subscriber user data configuration.

    2.6 MG Interface Configuration


    2.6.1 H.248 protocol MG interface configuration
    1. Data plan
    Data Type
    MG interface
    data

    IP addresses
    and

    Item

    Data

    mgid

    code

    text

    protocol

    UDP

    port number

    MG: 2944
    MGC: 2944

    Terminal ID

    0---31

    MG interface

    17.248.41.1/8

    Default gateway

    17.0.0.1/8

    Confidential Information of Huawei. No Spreading without Permission

    DSLAM Line Test Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    subnet masks

    MGC

    200.200.200.200

    Telephone
    numbers

    Phone 1Phone 32

    Shelf/Slot: 0/11
    Telephone numbers:
    4010010040100131

    VLAN

    vlan_tag

    172

    2. procedure
    Step 1 Configure vlan and uplink .
    huawei(config)#vlan 172 standard
    huawei(config)#port vlan 172 0/9 0

    Step 2 Configure the upstream VLAN interface for the media stream and the signaling
    flow.
    huawei(config)#interface vlanif 172
    huawei(config-if-vlanif172)#ip address 17.248.41.1 8

    Step 3 Configure the static route from the MG to the MGC.


    huawei(config)#ip route-static 200.200.200.200 24 17.0.0.1

    Step 4 Configure the address pools for the media stream and the signaling flow.
    huawei(config)#voip
    huawei(config-voip)#ip address media 17.248.41.1 17.0.0.1
    huawei(config-voip)#ip address signaling 17.248.41.1

    Step 5 Add an MG interface.


    huawei(config)#interface h248 0
    Are you sure to add MG interface? (y/n)[n]:y

    Step 6 Configure the MG interface attributes.


    huawei(config-if-h248-0)#if-h248 attribute mgip 17.248.41.1 mgport 2944
    code text
    transfer udp primary-mgc-ip1 200.200.200.200 primary-mgc-port 2944 mgmedia-ip1 17.248.41.1
    huawei(config-if-h248-0)#display if-h248 attribute
    ----------------------------------------------------------MGID 0
    MG Description MG DomainName Protocol H248
    Top H248 Version 3
    Profile 2833Encrypt Codetype Text
    Transmode UDP
    HeartBeatGenTimer(s) 60
    HeartBeatRetransTimes 3
    HeartBeatRetransTimer(s) 60
    MG signaling IP 17.248.41.1
    MG signaling Port 2944
    MG media IP 17.248.41.1
    MIDType IP4_ADDR
    DeviceName Active MGC MGC Port :2944 MGC IP:200.200.200.200
    Active MGC MGC Domain Name:Standby MGC MGC Port :- MGC IP:Standby MGC MGC Domain Name:-----------------------------------------------------------

    Step 7 Enable the MG Interface.


    4

    Confidential Information of Huawei. No Spreading without Permission

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    huawei(config-if-h248-0)#reset coldstart
    Are you sure to reset MG interface?(y/n)[n]:y

    3. Result
    The MG interface interconnects with the MGC successfully and the MG interface is in the
    normal state.
    huawei(config-if-h248-0)#quit
    huawei(config)#display if-h248 all
    ------------------------------------------------------------------------MGID TransMode State MGPort MGIP/DomainName MGCPort MGCIP/DomainName
    ------------------------------------------------------------------------0 UDP Normal 2944 17.248.41.1 2944 200.200.200.200

    4. Configure the VoIP user


    huawei(config)#board confirm 0/2
    huawei(config)#esl user
    huawei(config-esl-user)#mgpstnuser batadd 0/11/0 0/11/31 0 terminalid 0
    telno 40100100
    huawei(config-esl-user)#display mgpstnuser 0 0 32
    -----------------------------------------------------------------------F /S /P
    MGID
    TelNo
    Priority PotsLineType TerminalID
    -----------------------------------------------------------------------0 /2 /0
    0
    40100100
    Cat3
    DEL
    A0
    0 /2 /1
    0
    40100101
    Cat3
    DEL
    A1
    ......
    0 /2 /30
    0
    40100130
    Cat3
    DEL
    A30
    0 /2 /31
    0
    40100131
    Cat3
    DEL
    A31
    ------------------------------------------------------------------------

    2.6.2 MGCP protocol MG interface configuration


    1. Data plan
    Data Type
    MG interface
    data

    Item

    Data

    mgid

    code

    text

    protocol

    UDP

    port number

    MG: 2727
    MGC: 2727

    Terminal ID

    0---31

    IP addresses
    and
    subnet masks

    MG interface

    17.248.41.1/8

    Default gateway

    17.0.0.1/8

    MGC

    200.200.200.200

    Telephone
    numbers

    Phone 1Phone 32

    Shelf/Slot: 0/11
    Telephone numbers:
    4010010040100131

    VLAN

    vlan_tag

    172

    Confidential Information of Huawei. No Spreading without Permission

    DSLAM Line Test Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    2. Procedure
    Step 1 Configure vlan and uplink .
    huawei(config)#vlan 172 standard
    huawei(config)#port vlan 172 0/9 0

    Step 2 Configure the upstream VLAN interface for the media stream and the signaling
    flow.
    huawei(config)#interface vlanif 172
    huawei(config-if-vlanif2)#ip address 17.248.41.1 8
    huawei(config-if-vlanif2)#quit

    Step 3 Configure the address pools for the media stream and the signaling flow.
    huawei(config)#voip
    huawei(config-voip)#ip address media 17.248.41.1 17.0.0.1
    huawei(config-voip)#ip address signaling 17.248.41.1

    Step 4 Configure the supported MG control protocol as MGCP.


    huawei(config)#protocol support mgcp
    huawei(config)#save
    huawei(config)#reboot system

    Step 5 Add an MG interface.


    huawei(config)#interface mgcp 0
    Are you sure to add MG interface? (y/n)[n]:y

    Step 6 Configure the MG interface attributes.


    huawei(config-if-mgcp-0)#if-mgcp attribute mgip 17.248.41.1 primary-mgcip1
    200.200.200.200
    mgport
    2727
    primary-mgc-port
    2727
    domainName
    MA5600T.com
    huawei(config-if-mgcp-0)#display if-mgcp attribute
    -----------------------------------------------------MGID 0
    MG description MG DomainName MA5600T.com
    Protocol MGCP
    2833Encrypt Codetype Text
    Transmode UDP
    IP 17.248.41.1
    Port 2727
    HeartBeat Timer(s) 60
    MGC[1] MGC PORT :2727 MGC IP:200.200.200.200
    MGC[1] MGC Domain Name:MGC[2] MGC PORT :- MGC IP:MGC[2] MGC Domain Name:MGC[3] MGC PORT :- MGC IP:MGC[3] MGC Domain Name:-------------------------------------------------------

    Step 7 Enable the MG Interface.


    huawei(config-if-mgcp-0)#reset
    Are you sure to reset MG interface?(y/n)[n]:y

    3. Result
    The MG interface interconnects with the MGC successfully and the MG interface is in the
    normal state.
    huawei(config-if-mgcp-0)#quit
    huawei(config)#display if-mgcp all
    --------------------------------------------------------------------MGID State MGPort MGIP/DomainName MGCPort MGCIP/DomainName
    --------------------------------------------------------------------0 Normal 2727 17.248.41.1 2727 200.200.200.200

    Confidential Information of Huawei. No Spreading without Permission

    MA5600T VOIP Service Configuration Exercise Guide


    ISSUE 1.0

    Chapter 2 MA5600T VOIP Service


    Configuration

    ---------------------------------------------------------------------

    4. Configure the VoIP user


    huawei(config)#board confirm 0/2
    huawei(config)#esl user
    huawei(config-esl-user)#mgpstnuser batadd 0/11/0 0/11/31 0 terminalid 0
    telno 40100100
    huawei(config-esl-user)#display mgpstnuser 0 0 32
    -----------------------------------------------------------------------F /S /P
    MGID
    TelNo
    Priority PotsLineType TerminalID
    -----------------------------------------------------------------------0 /2 /0
    0
    40100100
    Cat3
    DEL
    A0
    0 /2 /1
    0
    40100101
    Cat3
    DEL
    A1
    ......
    0 /2 /30
    0
    40100130
    Cat3
    DEL
    A30
    0 /2 /31
    0
    40100131
    Cat3
    DEL
    A31
    ------------------------------------------------------------------------

    Confidential Information of Huawei. No Spreading without Permission

    You might also like