Scribd Logo
Upload

Welcome to Scribd!

  • 127 views

    RDM - HSB-3

    Uploaded by

    jeneveuxpas
    This document summarizes the HSE-3 Laboratory Heat Sealer. It is a precision heat sealer that produces repeatable, high-quality heat seals between 5-25mm wide and up to 300mm long. It features digital controllers for temperature, pressure, and dwell time. The user can easily change the sealing bar configuration and materials. The sealer provides accurate and consistent seals for testing flexible materials and blister packs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RDM - HSB-3

    Uploaded by

    jeneveuxpas
    127 views2 pages
    This document summarizes the HSE-3 Laboratory Heat Sealer. It is a precision heat sealer that produces repeatable, high-quality heat seals between 5-25mm wide and up to 300mm long. It features digital controllers for temperature, pressure, and dwell time. The user can easily change the sealing bar configuration and materials. The sealer provides accurate and consistent seals for testing flexible materials and blister packs.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the HSE-3 Laboratory Heat Sealer. It is a precision heat sealer that produces repeatable, high-quality heat seals between 5-25mm wide and up to 300mm long. It features digital controllers for temperature, pressure, and dwell time. The user can easily change the sealing bar configuration and materials. The sealer provides accurate and consistent seals for testing flexible materials and blister packs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    127 views2 pages

    RDM - HSB-3

    Uploaded by

    jeneveuxpas
    This document summarizes the HSE-3 Laboratory Heat Sealer. It is a precision heat sealer that produces repeatable, high-quality heat seals between 5-25mm wide and up to 300mm long. It features digital controllers for temperature, pressure, and dwell time. The user can easily change the sealing bar configuration and materials. The sealer provides accurate and consistent seals for testing flexible materials and blister packs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    HSE-3

    LABORATORY HEAT SEALER



    PRECISION LABORATORY HEAT SEALER FOR PRODUCTION OF REPEATABLE HIGH
    QUALITY HEAT SEALS AND DETERMINATION OF HEAT SEAL THRESHOLD.
    PRODUCES SEALS 5 TO 25MM WIDE AND UP TO 300MM LONG.


    Benefits:
    Choose heat sealing bar configuration, either single
    (upper) or dual (upper & lower, meets ASTM F2029)
    User can easily change sealing bar for various surface
    areas or surface finishes
    Accurate and repeatable seals due to precision ground
    sealing faces and jaw guidance system
    Versatile applications for flexible materials, blister
    packs and pots
    Low Maintenance - 12 months between calibrations

    Features:
    Precise pressure calibration of standard surface area
    jaw face
    Temperature, pressure and dwell time digital
    controllers
    Jaws constructed in aluminium and silicon with
    precision ground faces
    Range of jaw face surfaces including Matched Crimp
    and Teflon Coating
    Auto cycle feature for greater user convenience with
    multiple samples RDM Test Equipment
    Unit 39 Golds Nurseries Bus. Park
    Jenkins Drive, ELSENHAM
    Hertfordshire, CM22 6JX, UK

    Tel: +44(0)1279 817171
    Fax: +44(0)1279 815743
    E-mail: [email protected]
    Web: www.rdmtest.com
    Sealing Bars Flat
    Sealing Bars - Crimp
    ASSURED QUALITY
    TESTING SOLUTIONS
    Specification
    Seal Width 300 mm max. (Option to extend to 350mm)
    Temperature
    Control
    Range: Ambient to 300C, Accuracy: +/- 0.5%, Operating Accuracy:
    +/-2C. Single (Upper) sealing jaw temperature control, or Dual
    (Upper & Lower) sealing jaw temperature control
    Pressure Range: 0 to 100psi (6.8bar, 689Kpa), via precision regulator and
    digital display. Accuracy +/-5%, Repeatability +/- 0.02psi .
    Supply via clean and dry compressed airline or bottled air/nitrogen
    at 90 to 100psi
    Dwell Time Range: 0.1 to 99.9 sec., Resolution 0.01 sec
    Auto Cycle &
    Delay Time
    Delay Time Range: 0.1 to 99.9 sec
    For automatic cycling of sealing bars used in manual production
    environments. Assists with correct alignment of sample. Electronic
    processor controlled.
    Jaw Guidance
    System
    Dovetail slide on jaws with quick release mechanism.
    Sealing Jaws Standard flat jaws 25mm x 300mm, constructed in aluminium with
    precision ground face. Lower sealing jaw with precision ground
    silicone rubber face.
    (See options below)
    Environment: 5-50C ambient operating temperature,
    RH 75% max (non-condensing)
    Power 240V AC 50/60 Hz (110V AC voltage available
    on request)
    Options
    Single (Upper) sealing jaw temperature control or Dual (Upper & Lower) sealing
    jaw temperature control
    Sealing jaw dimension/profile as required (inc. Matched crimp 120 x 1.8mm pitch)
    Stainless Steel sealing jaws
    Teflon Coated Tape or Teflon Coated Jaws
    Blister Pack Simulator sealing jaw
    Additional Blister tray
    Footswitch
    PVC Dust Cover
    Alarm package for temperature High/Low, selectable
    Cold seal system
    Digital thermometer with s/s band probe to check jaw temperature (see image)
    RDM Test Equipment
    Unit 39 Golds Nurseries Bus. Park
    Jenkins Drive, ELSENHAM
    Hertfordshire, CM22 6JX, UK

    Tel: +44(0)1279 817171
    Fax: +44(0)1279 815743
    E-mail: [email protected]
    Web: www.rdmtest.com
    ASSURED QUALITY
    TESTING SOLUTIONS

    You might also like