Lutz Catalogue

Dear Reader
For many years Lutz has enjoyed the satisfaction of providing our worldwide
customers with products which have given years of service in many diverse industries
and markets.
As we cater responsibly for your many needs we would like to state clearly our
mission, which is to consistently provide you with products which not only meet
your specic requirements, but which are safe, reliable and cost-effective.
In this brochure, we would like to share with you, our Seasons which we believe
guratively sum up our ideal to be always innovative, producing new solutions to
meet your needs, whilst being constant in our endeavours to full our mission.
We would like to thank all of our existing customers for their loyalty and trust in
us which has given us a position of leadership, and those of you who would benet
from our products in the future.
Jrgen Lutz
3
Contents
Pump tube PP (polypropylene) for corrosive and neutral liquids ................................................ 6
Pump tube PVDF (polyvinylidene uoride) for highly corrosive chemicals and neutral liquids ....... 8
Pump tube SS (stainless steel) for corrosive and neutral liquids ................................................. 10
Pump tube Alu (aluminium) for neutral, non ammable liquids ................................................. 14
Pump tube HC (Hastelloy C) for highly corrosive chemicals ...................................................... 16
Container pump B50 .......................................................................................................... 18
Eccentric screw pump Lutz HD-E ......................................................................................... 22
Eccentric screw pump B70V-SR 12.1 and 25.1 .................................................................... 24
Eccentric screw pump B70V-SR 50.1 ................................................................................... 26
Eccentric screw pump B70V 12.1 and 25.1 .......................................................................... 28
Eccentric screw pump B70V 25.2 and 50.1 .......................................................................... 30
Eccentric screw pump B70V 75.1 ......................................................................................... 32
Eccentric screw pump B70V 120.1 ....................................................................................... 34
B70V-H-SR Sanitary 12.1, 25.1 and 50.1 ............................................................................ 36
B70V-H-D Sanitary 12.1, 25.1, 25.2 and 50.1 .................................................................... 38
B70V-H-D Sanitary 75.1 ..................................................................................................... 40
Drum pump Lutz B2 Vario (polypropylene or stainless steel) for the laboratory and research sector 44
Pump tube RE-PP (polypropylene) for complete drum drainage of corrosive and neutral liquids ...... 46
Pump tube RE-SS (stainless steel) for complete drum drainage of corrosive and neutral liquids ....... 48
Pump tube MP-PP (polypropylene) for mixing and pumping of corrosive and neutral liquids ........ 50
Pump tube MP-SS (stainless steel) for mixing and pumping of corrosive and neutral liquids ......... 52
Lutz pump sets .................................................................................................................... 54
Choice of motors ................................................................................................................. 56
Accessories ......................................................................................................................... 59
Pump tube SS (stainless steel) for highly inammable liquids ................................................... 62
Pump tube HC (Hastelloy C) for highly inammable chemicals ................................................. 64
Pump tube RE-SS (stainless steel) for complete drum drainage of highly inammable liquids ....... 66
Pump tube MP-SS (stainless steel) for mixing and pumping of highly inammable liquids ........... 68
Table of dimensions drum and container pumps ................................................................ 70
Dimensional drawing Lutz B2 Vario ................................................................................... 71
Dimensional drawing Lutz B2 MD-200/MD-200 ................................................................ 71
Dimensional drawing container pump B50 ........................................................................ 71
Dimensional drawing Eccentric screw pump HD-E ............................................................. 72
Dimensional drawing eccentric screw pump B70V-SR / B70V-H-SR Sanitary 12.1-50.1 ...... 72
Dimensional drawing Eccentric screw pump B70V-D / B70V-H-D Sanitary 12.1-75.1 ......... 73
Dimensional drawing Eccentric screw pump B70V 120.1 ................................................... 73
Dimensional drawing Eccentric screw pump B70V-SR 12.1-75.1 (compressed air) ............ 74
Dimensional drawing of anges for eccentric screw pump B70V ....................................... 74
Dimensions of compressed air motors for eccentric screw pump B70V .............................. 74
4
Transferring corrosive, flammable or toxic
liquids presents its own challenges to personal
safety and the environment.
At Lutz, we believe you will be able to nd your
optimum solution among the range of pro-
ducts which have been developed specically
to overcome the dangers and disadvantages of
decanting such liquids.
1954
The company is founded by Karl Lutz.
1963
Explosion-proof motor for drum pumps,
approved by the PTB*, Braunschweig.
1972
The product innovation a sealless pumping unit.
1987
The rst pumping unit worldwide for complete
drum drainage.
2001
Complete pump sets provide enhanced service
and a high degree of customer-friendliness.
2001
Centrifugal pumps easy circulation even in
heavy-duty applications.
2001
Certication of all the motors, pumping units and
ow meters for compliance with ATEX.
2004
Flow meter system HDO for thin bodied to highly
viscous liquids.
2006
Complete pump systems for the
transfer of alternative fuels and
additives from drums and containers.
1988
The new MA/ME generation of motors: Safety
standards that are state of the art even today.
1990
EMIGA emission-proof drum adapter for enhan-
ced safety and health protection at the work place.
1990
The rst compressed air motor worldwide in a
ameproof enclosure with an explosion-
protection classication of Ex d IIC T6.
1993
Modular ow meter system for efciency and
accurate measurement.
1994
Compressed-air-operated oil-free double dia-
phragm pumps extend the range of products.
2000
New development of a container pump for a safe
transfer of chemicals.
From the bucket to the pump
(*The Physikalisch-Technische Bundesanstalt (PTB), Braunschweig and Berlin, is the National Institute of natural and engineering
sciences and the highest technical authority for metrology and physical safety engineering in the Federal Republic of Germany)
2012
The new generation of ow meters. The rst
ow meter with a touch screen display and
background lighting display and usability,
multilingual interface and compact design.
2000
New development of a ameproof relay module
for ow meters.
2007
Lutz B2 Vario pump
for the laboratory and research sector.
2010
Battery powered laboratory pump Lutz B1
for convenient and safe transfer of small
liquid amounts.
2010
Compressed air motor MD-200/MD-300
for the Lutz B2 Vario family.
2011
Lutz B70V Sanitary pump, according to the
3-A Sanitary Standard. For optimal pumping
of thin-bodied to highly viscous media.
4
3
2
1
5
Environment
Getting started on any project demands a little
concentration, but once the focus is there life
becomes easier and with the right tools, the job
is quickly done. No more spillage and waste. No
claims against the environment, no unnecessary
accidents.
80% of the transfer jobs can be effected with our
basic materials which cover neutral, aggressive
and highly corrosive liquids. Our separate
corrosion guide provides a simple and quick
way to determine the right pump material for
your liquid.
6
Please remember that the delivery rate is reduced as the viscosity increases.
The density of the pumped liquid similarly affects the delivery rate, though to
a lesser extent.
Impeller R
Pump tube PP (polypropylene)
Lutz Drum and Container Pumps
Impeller L
Materials (coming into contact with the pumped medium)
PP-MS PP-SL
Housing: PP/PVDF PP/PVDF
Impeller: PP PP
Seals: Viton none
Mechanical seal: Carbon, SiC, Viton, none
HC-4 (2.4610)
Bearing: ETFE/PTFE ETFE/PTFE
Drive shaft: Stainless Steel (1.4571) Stainless Steel (1.4571)
or HC-4 (2.4610) or HC-4 (2.4610)
Viton is a registered trademark of DuPont Performance Elastomers.
H

(
m

w
c
)
Q (l/min.)
H

(
m

w
c
)
Q (l/min.)
4
3
2
1
7
Pump tube PP-MS PP-SL
Type of impeller R L R L
Category 1 / 2 (acc. to ATEX) no no no no
Immersion tube diameter: up to mm 41 41 41 41
Temperature of medium: up to C 50 50 50 50
Material: Pump tube PP PP PP PP
Impeller PP PP PP PP
Hose connection: Nominal diameter mm 19-32 19-32 19-32 19-32
Outer thread G 1 1/4 G 1 1/4 G 1 1/4 G 1 1/4
Length: 700 mm*** shaft SS Order No. 0103-500 0103-504 0110-300 0110-304
Length: 700 mm*** shaft HC Order No. 0103-400 0103-404 0110-200 0110-204
Length: 1400 mm*** shaft HC Order No. 0110-213 0110-208
MI-4 MI-4-E
Characteristic curve no. 100 101 100 101
- with speed Delivery rate* up to l/min. 160 87 160 87
controller Delivery head* up to m wc 8.5 19 8.5 19
Output 500 W 500 W Viscosity** up to mPas 150 500 150 500
Voltage: 230 V 230 V Density**** up to kg/dm 1.1 1.4 1.1 1.4
Order No. 0030-000 0030-001 Weight (kg) motor + pump tube 3.9 3.9 3.9 3.9
MA II 3
Output: 460 W 460 W Delivery rate* up to l/min. 155 78 155 78
Voltage: 230 V 230 V Delivery head* up to m wc 7.5 16 7.5 16
LVR: no yes Viscosity** up to mPas 150 500 150 500
Density**** up to kg/dm 1.2 1.6 1.2 1.6
MA II 5 MA II 5 MA II 5 S
Output: 575 W 575 W 575 W Delivery rate* up to l/min. 160 83 160 83
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 9 18 9 18
LVR: no yes no Viscosity** up to mPas 350 800 350 800
acid-proof Density**** up to kg/dm 1.3 1.8 1.3 1.8
Order No. 0060-001 0060-009 0060-091 Weight (kg) motor + pump tube 6.5 6.5 6.5 6.5
MA II 7 Characteristic curve no. 106 107 106 107
Voltage: 230 V 230 V Delivery head* up to m wc 12 25 12 25
MD-1 MD-2
Operating Delivery head* up to m wc 10 20 10 20
Pressure: 6 bar 6 bar Viscosity** up to mPas 600 850 600 850
* Determined with water at 20 C *** Special lengths **** Determined with 3 m hose 3/4 and open nozzle 3/4. Special voltages and
** Determined with oil 2002500 mm on request Higher densities possible for shorter operating periods. frequencies on request.
Choice of motors Operating data
Pump tube PP (polypropylene)
for corrosive and neutral liquids
Low-voltage release (LVR):
Prevents the pump from starting
up again without warning after a
power failure. Its recommended
when pumping hazardous liquids.
P r o d u c t d e t a i l
8
Impeller L
Pump tube PVDF (polyvinylidene uoride)
a lesser extent.
Impeller R
PVDF-MS PVDF-SL
Housing: PVDF PVDF
Impeller: ETFE ETFE
Seals: Viton none
Mechanical seal: Carbon/SiC, Viton, none
HC-4 (2.4610)
Drive shaft: HC-4 (2.4610) HC-4 (2.4610)

4
3
2
1
9
Pump tube PVDF (polyvinylidene uoride)
for highly corrosive chemicals and neutral liquids
Pump tube PVDF-MS PVDF-SL
Material: Pump tube PVDF PVDF PVDF PVDF
Impeller ETFE ETFE ETFE ETFE
Length: 700 mm*** Order No. 0123-400 0123-404 0122-200 0122-204
MI-4 MI-4-E
Output: 500 W 500 W Viscosity** up to mPas 150 500 150 500
MA II 3


MA II 7

Order No. 0060-002 0060-010
Weight (kg) motor + pump tube 8.3 8.3 8.3 8.3

MD-1 MD-2
Order No. 0004-087 0004-088
B4/GT
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 8.5 10 8.5 10
Protection Viscosity** up to mPas 400 400 400 400
switch: no yes Density**** up to kg/dm 2.0 2.2 2.0 2.2
Order No. 0004+019 0004+067

IE2
10
Impeller L
Impeller R
Pump tube SS (stainless steel)
a lesser extent.
SS-MS SS-SL
Housing: Stainless steel (1.4571) Stainless steel (1.4571)
Impeller: ETFE ETFE
Seals: Viton none
Mechanical seal: Carbon, ceramic, Viton, none
stainless steel
Bearing: Pure carbon Pure carbon
Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)
Pump tubes in physiologically
safe version (FDA)
All materials coming into contact
with the pumped medium
are FDA approved materials.
4
3
2
1
11
for corrosive and neutral liquids
Pump tube SS-MS SS-SL
Category 1 / 2 (acc. to ATEX) yes yes yes yes
Material: Pump tube 1.4571 1.4571 1.4571 1.4571
Length: 1400 mm*** Order No. 0150-113 0150-108
MI-4 MI-4-E
controller Delivery head* up to m wc 10 19 10 19
MA II 3
MA II 7
MD-1 MD-2
Order No. 0004-087 0004-088
B4/GT
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 13 12 13 12
Order No. 0004+019 0004+067 Weight (kg) motor + pump tube 13.7 13.7 13.7 13.7
IE2
12
Coupling

? Hand wheel

Bearing housing
Shaft
I Outrun piece
Outer tube
Inner tube
Cartridge bearing
T Impeller
1 Pump foot
The modular concept behind the construction of
the Lutz drum pump, provides not only for xed
installations, but also assures a great degree of
exibility in movement. The hand wheel makes
the pump easy to carry and provides a simple
but quick means of coupling and un-coupling
the motor.
Just ten parts in the construction allow the
pumps to be service and user friendly. Inter-
changeability of parts and no special tools re-
duce downtime to a bare minimum.
Dont be stuck in one place
?

T
1
4
3
2
1
13
Diversity
The heat is on. Different jobs may demand
different tools or a different approach to provide
a satisfactory solution to your transfer problem.
Here we provide exceptional materials and
exceptional pumps to cover those oily, greasy,
sticky, shear sensitive and highly viscous
liquids. From intermittent to round-the-clock
transfer, we have a uid management solution
at hand, never mind the industry you are in.
14
Impeller L
Impeller R
Pump tube Alu (aluminium)
a lesser extent.
Alu-MS Alu-SL
Housing: Alu, PVDF Alu, PVDF
Impeller: ETFE ETFE
Seals: Viton none
Mechanical seal: Carbon, SIC, Viton, none
HC-4 (2.4610)
Bearing: ETFE ETFE
Drive shaft: Stainless Steel (1.4571) Stainless Steel (1.4571)
4
3
2
1
15
Pump tube Alu (aluminium)
for neutral, non ammable liquids
Prevents the pump from
starting up again without
warning after a power failure.
Its recommended when
pumping hazardous liquids
Pump tube Alu-MS Alu-SL
Material: Pump tube Alu Alu Alu Alu
Length: 1500 mm*** Order No. 0132-309
MI-4 MI-4-E
Order No. 0030-000 0030-001
MA II 3
Order No. 0060-000 0060-008
Order No. 0060-001 0060-009 0060-091
MA II 7
Order No. 0060-002 0060-010
MD-1 MD-2
Order No. 0004-087 0004-088
B4/GT
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 8.5 10 8.5 10
Order No. 0004+019 0004+067
IE2
16
503
505
507
509
511
501
Impeller L
Measured values ( 10%) determined with water at 20 C and drive motors 230 V. Q (l/min.)
H

(
m

w
c
)
a lesser extent.
Pump tube HC (Hastelloy C)
HC-SL
Housing: HC-22 (2.4602)
Impeller: ETFE
Seals: Viton (FEP coated)
Bearing: ETFE, Carbon
Drive shaft: HC-4 (2.4610)
Note: The pump tube in HC is approved
for use with ammable liquids.
For the correct motor selection see page 56.
Which pump for which liquid?
See resistance table
chapter 06, page 181-197!
Tip
500
502
504
506
510
508
Impeller R
Measured values ( 10%) determined with water at 20 C and drive motors 230 V. Q (l/min.)
H

(
m

w
c
)
4
3
2
1
17
for highly corrosive chemicals
P r o d u c t d e t a i l Pump tube HC-SL
Type of impeller R L
Category 1 / 2 (acc. to ATEX) yes yes
Immersion tube diameter: up to mm 42 42
Temperature of medium: up to C 120 120
Material: Pump tube HC HC
Impeller ETFE ETFE
Hose connection: Nominal diameter mm 19-32 19-32
Outer thread G 1 1/4 G 1 1/4
MI-4 MI-4-E
Characteristic curve no. 500 501
- with speed Flow rate* up to l/min. 210 117
controller Delivery head* up to m ws 10 19
Output: 500 W 500 W Viscosity** up to mPas 350 500
Voltage: 230 V 230 V Density**** up to kg/dm 1.1 1.4
Order No. 0030-000 0030-001 Weight (kg) Motor + pump tube 7.2 7.2
MA II 3
Output: 460 W 460 W Flow rate* up to l/min. 178 95
Voltage: 230 V 230 V Delivery head* up to m ws 9 14
LVR.: no yes Viscosity** up to mPas 200 350
Density**** up to kg/dm 1.2 1.6
Output: 575 W 575 W 575 W Flow rate* up to l/min. 190 100
Voltage: 230 V 230 V 230 V Delivery head* up to m ws 10 16
LVR.: no yes no Viscosity** up to mPas 550 700
acid-proof Density**** up to kg/dm 1.3 1.8
Order No. 0060-001 0060-009 0060-091 Weight (kg) Motor + pump tube 9.8 9.8
MA II 7
LVR.: no yes Viscosity** up to mPas 400 500
MD-1 MD-2
Operating- Delivery head* up to m ws 12 20
pressure: 6 bar 6 bar Viscosity** up to mPas 400 500
Order No. 0004-087 0004-088
Weight (kg) Motor + pump tube 5.9 5.9
B4/GT Characteristic curve no. 510 511
Voltage: 230/400 V 230/400 V Delivery head* up to m ws 13 12
Protection Viscosity** up to mPas 400 500
switch: no yes Density**** up to kg/dm 2.0 2.2
Order No. 0004+019 0004+067
Weight (kg) Motor + pump tube 15.2 15.2
IE2
18
Container pump B50
Container pump B50 PP/HC B50 PP/SS
Pump tube: Polypropylene (PP) Polypropylene (PP)
Stator: PPO / PPE PPO / PPE
Mechanical seal: Carbon / SiC / HC Carbon / SiC / HC
Secondary seal: Viton (EPDM) Viton (EPDM)
Drive shaft: HC-4 (2.4610) Stainless steel (1.4571)
4
3
2
1
19
Container pump B50 PP/HC B50 PP/SS
Category 1 / 2 (acc. to ATEX) no no
Immersion tube diameter: max. mm 100 100
Temperature of medium: max. C 40 40
Material: Pump tube PP PP
Impeller/diffuser material PPO / PPE PPO / PPE
Drive shaft Hastelloy C (2.4610) Stainless steel (1.4571)
Outrun piece: G 1 1/2 G 1 1/2
Outer thread Outer thread
Length: 1100 mm Order No. 0180-001 0180-501
Simplicity and maximum
working safety
Bulk chemical transfer or lling is made light
work of with the B50 with ows up to 200 l/min.
and quick installation.
The B50 is constructed along the lines of a
drum pump in order to maintain the proven
features. These include: long life, reliability, low
main te n ance, reduced downtime, process and
transfer time savings and not least en hanced
safety and efciency.
The vertically mounted pump runs at low speed
with a direct coupled motor. The motor is secured
with the Lutz hand wheel for quick assembly and
disassembly, and with power to cover densities
from 1.0 to 1.9 kg/dm and viscosities up to
100 mPas without penalty. The pump is
positively mounted into the container with a
specially designed adaptor.
Single phase motor
Output: 0.55 kW 0.75 kW Delivery rate* up to l/min. 200 200
Density: up to 1.3 kg/dm up to 1.8 kg/dm Delivery head* up to m wc 22 22
Speed: 2800 1/min. 2700 1/min. Viscosity up to mPas 100 100
Prot. class: IP 54 IP 54 Weight (kg) Motor + pump tube 10.5 13.5 10.5 13.5
Order No. 0180-030 0180-031
* Determined with water at 20 C Motors in special voltages and frequencies on request.
For bulk transfer of chemicals
Container pump B50
20
Chemical
Beverage
Pharmaceutical
Food industry

Through thick and thin
Printing ink
Liquid soap
Liquid wax
Honey
Fruit pulp
Fruit juice
Glucose
Gear oil
Resin
Lacquer
Latex emulsion
Motor oil
Polyester resin
Shampoo
Tomato ketchup
Yoghurt
4
3
2
1
21
High viscosity pumps
Viscous liquids often present a challenge in
trying to transfer them. To share this task with
you, we have a range of progressive cavity
pumps which covers viscosities from 500 mPas
to 120,000 mPas.
Our pumps have been designed along with a
modular concept that provides a maximum of
exibility with a minimum of fuss. Simplicity
and ease of handling are inherent characteristics.
Choice of motors electric or pneumatic, shaft,
sealing method and stators provide the best for
user-friendliness.
Flows from 12 to 120 l/min. at pressures up
to 10 bar make easy work of emptying drums
and containers.
All pumps can be quickly disassembled and
cleaned, an essential requirement for the
food, beverage, cosmetic and pharmaceutical
industries.
Running at relatively low speeds, shear sensitive
liquids and liquids containing solids present
no problem. Likewise sticky liquids such as
molasse, glucose and honey.
22
Bearing head with mechanical seal
Compact unit for bearing and bearing shaft
Wide range of mechanical seals
Easy detachable pump tube
Easy cleaning
No tools for disassembling of pump
Free running drive shaft
Easy to clean
Rotor
Smooth pumping of liquids
High pressure
Constant volumetric ow
Drum and Container Pumps

Eccentric screw pump Lutz HD-E
HD-E
Pump tube: Stainless steel (1.4571)
Stator: PTFE
Mechanical seal: Carbon/CrMo-casting (bellows constr.)
Secondary seal: Viton
Drive shaft: Stainless steel (1.4571)
safe version (FDA)
4
3
2
1
23
Pump tube HD-E
Category 1 / 2 (acc. to ATEX) no
Immersion tube diameter: up to mm 41
Temperature of medium: up to C 100
Material: Pump tube Stainless steel (1.4571)
Stator PTFE
Hose connection: Nominal diameter mm 19-32
Outer thread G 1 1/4
Length: 1000 mm Order-No. 0155-010
Single phase motor
Output: 0.55 kW Delivery rate up to l/min. 20
Voltage: 230 V Delivery head up to bar 4
Speed: 1500 1/min. Viscosity up to mPas 500-4000
Protection class: IP 54 Weigth(kg) motor + pump tube 11.5
Order No. 0155-032
Motors in special voltages and frequencies on request.
light and compact
simple and easily dismantled
easy to clean
suitable for continuous operation
practical Lutz hand wheel for motor
separation and for carrying
smooth ow
for thin and thick liquids
constant volumetric ow
The intelligent solution
for the pumping of
medium viscous liquids
High efciency, handy, low weight and easily
disassembled for easy cleaning make the Lutz
HD-E a practical drum pump system especially
for medium viscous liquids.
It is suitable for pumping acid and basic liquids,
oils, used oil, waste disposal liquids, colours,
foodstuffs, cosmetics and creams.

for viscosities from 500 to 4000 mPas

Lutz Eccentric screw pump HD-E
24
Eccentric screw pump B70V-SR, B70V HD-SR 12.1 and 25.1
a lesser extent.
B70V-SR B70V HD-SR
12.1/25.1 12.1/25.1
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM (Viton) FPM (Viton)
Mechanical seal: Carbon/CrMo-Casting, Viton WC/WC/EPDM
Packing gland: PTFE Soft packing
safe for use with foodstuffs
Stator material: NBR light, Viton, PTFE PTFE
Wichtige Info!
When pumping in Zone O areas or pumping ammable liquids
only pumps with mechanical seal, universal joint shaft and PTFE
stator are approved.
Viscosity range from aqueous to uidity range.
Important Information!
4
3
2
1
25
Pump tube B70V-SR P r o d u c t d e t a i l
Lutz Eccentric screw pump B70V-SR 12.1 and 25.1
for viscosities from 1 - 40,000 mPas
Size 12.1 12.1 12.1 25.1 25.1 25.1
Seal Packing gland (St) MS MS St MS MS St
Mechanical seal (MS)
Drive shaft Torsion shaft (TS) TS UJ UJ TS UJ UJ
Universal joint shaft (UJ)
Delivery rate* up to l/min. 12 12 12 25 25 25
Delivery head* up to bar 6 6 6 8 8 8
Temp. of medium** up to C 140 140 140 140 140 140
Material pump tube 1.4571 1.4571 1.4571 1.4571 1.4571 1.4571
Immersion tube diameter mm 54 54 54 54 54 54
Pressure joint Outer thread G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2
Weight kg 7 7 7 7 7 7
Length*** mm 1000 1000 1000 1000 1000 1000
Stator NBR light Order No. 0174-131 0174-141 0174-121
(T max. 80 C)
Stator Viton Order No. 0174-132 0174-142 0174-122
(T max. 140 C)
Stator PTFE Order No. 0174-014 0174-024 0174-004 0174-134 0174-144 0174-124
(T max. 140 C)
B70V HD-SR Order No. 0174-026 0174-146
Stator PTFE (Tmax. 100 C)
* Determined with water at 20 C, three-phase motor (900 rpm) and elastomer stator Combination of packing gland and torsion shaft on request.
** with PTFE Stator with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100C)
*** Special length 500 - 2000 mm on request (version with joint shaft only)
Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)
for pumping inammable liquids of the explosion group IIA (B70V-SR) or IIB (B70V HD-SR) and temperature class T4
Choice of motors
Universal motors non-ex. proof MI-4 MI-4-E MA II 3 MA II 5 MA II 7
Type 500 W, 230 V 500 W, 230 V 460 W, 230 V 575 W, 230 V 795 W, 230 V
Protection class/Weight IP 24 2.8 kg IP 24 2.8 kg IP 54 4.6 kg IP 54 5.4 kg IP 54 6.6 kg
- with speed contr.
Order No. (without low-voltage release) 0030-000 0030-001 0060-000 0060-001 0060-002
Order No. (with low-voltage release) 0060-008 0060-009 0060-010
Compressed air motors MD-1 MD-2 MD-3
Type 400 W 400 W 400 W
Operating pressure: 6 bar 6 bar 6 bar
Weight 1.1 kg 1.5 kg 2.1 kg
Order No. 0004-087 0004-088 0004-090
Universal motors explosion proof ME II 3 ME II 5 ME II 7 ME II 8
Type 460 W, 230 V 580 W, 230 V 795 W, 230 V 930 W, 230 V
Protection class/Weight IP 54 5.5 kg IP 54 6.3 kg IP 54 7.5 kg IP 54 8 kg
Order No. (with low-voltage release) 0050-000 0050-001 0050-002 0050-042
Order No. (without low-voltage release) 0050-016 0050-017 0050-018 0050-041
Different voltages and frequencies see page 56-57.
26
Eccentric screw pump B70V-SR and B70V HD-SR 50.1
a lesser extent.
B70V-SR 50.1 B70V HD-SR 50.1
Wichtige Info!
4
3
2
1
27
Lutz Eccentric screw pump B70V-SR and B70V HD-SR 50.1
Pump tube B70V-SR
Size 50.1 50.1 50.1
Seal Packing gland (St) MS MS St
Drive shaft Torsion shaft (TS) TS UJ UJ
Delivery rate* up to l/min. 50 50 50
Delivery head* up to bar 8 8 8
Temp. of medium** up to C 140 140 140
Material pump tube 1.4571 1.4571 1.4571
Immersion tube diameter mm 54 54 54
Pressure joint Outer thread G 1 1/2 G 1 1/2 G 1 1/2
Weight kg 7 7 7
Length*** mm 1100 1100 1100
(T max. 80 C)
(T max. 140 C)
Stator PTFE Order No. 0174-514 0174-524 0174-504
(T max. 140 C)
B70V HD-SR Order No. 0174-526
** with PTFE Stator with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100C)
**** Mechanical seal: carbon/CrMo-casting, Viton and SIC/SIC
for pumping inammable liquids of the explosion group IIA (B70V-SR) or IIB (B70V HD-SR) and temperature class T4
Choice of motors
Type 500 W, 230 V 500 W, 230 V 460 W, 230 V 575 W, 230 V 795 W, 230 V
- with speed contr.
Type 400 W 400 W 400 W
Operating pressure 6 bar 6 bar 6 bar
Order No. 0004-087 0004-088 0004-090
Universal motors explosion proof ME II 3 ME II 5 ME II 7 ME II 8
Type 460 W, 230 V 580 W, 230 V 795 W, 230 V 930 W, 230 V
Protection class/Weight IP 54 5.5 kg IP 54 6.3 kg IP 54 7.5 kg IP 54 8 kg
Order No. (with low-voltage release) 0050-000 0050-001 0050-002 0050-042
Order No. (without voltage release) 0050-016 0050-017 0050-018 0050-041
Different voltages and frequencies see page 56-57.
28
Eccentric screw pump B70V 12.1 and 25.1
When pumping in Zone 0 areas or pumping ammable liquids only
pumps with mechanical seal, universal joint shaft and PTFE stator are
approved.
B70V 12.1/25.1 B70V 25.1 Steel B70V HD
12.1/25.1
Housing: Stainless steel (1.4571) galvanized steel Stainless steel (1.4571)
Rotor: Stainless steel (1.4571) soft-nitrided steel Stainless steel (1.4571)
Seals: FPM (Viton) FPM (Viton) FPM (Viton)
Mechanical seal: Carbon/CrMo-Casting, Carbon/CrMo-Casting, WC/WC/EPDM
Viton (optional Viton (optional
SIC/SIC, Viton) SIC/SIC, Viton)
Drive shaft: Stainless steel (1.4571) galvanized steel Stainless steel (1.4571)
Stator material: NBR light, Viton, PTFE NBR light, Viton, PTFE PTFE
Wichtige Info!
4
3
2
1
29
Lutz Eccentric screw pump B70V 12.1 and 25.1
Pump tube B70V
Size 12.1 12.1 12.1 25.1 25.1 25.1 25.1 Steel
Seal Packing gland (St) MS MS St MS MS St MS
Drive shaft Torsion shaft (TS) TS UJ UJ TS UJ UJ TS
Delivery rate* up to l/min. 12 12 12 25 25 25 25
Delivery head* up to bar 6 6 6 8 8 8 8
Temp. of medium** max. C 140 140 140 140 140 140 80
Material pump tube 1.4571 1.4571 1.4571 1.4571 1.4571 1.4571 galv. Steel
Immersion tube diameter mm 54 54 54 54 54 54 54
Pressure joint Outer thread G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2
Weight kg 7 7 7 7 7 7 7
Length*** mm 1000 1000 1000 1000 1000 1000 1000
Stator NBR light Order No. 0172-121 0173-131 0173-121 0171-121
(Tmax. 80 C)
Stator Viton Order No. 0172-122 0173-132 0173-122 0171-122
(Tmax. 140 C)
Stator PTFE Order No. 0172-004 0173-014 0173-004 0172-124 0173-134 0173-124 0171-124
(Tmax. 140 C)
B70V HD-D Order No. 0173-016 0173-136
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100C)
*** Special lengths 500 - 2000 mm on request (version with joint shaft only)
for pumping inammable liquids of the explosion group IIA (B70V) or IIB (B70V HD-D) and temperature class T4
Choice of motors
Motors with cable terminal box For B70V - 12.1 For B70V - 25.1
Type 0.37 kW, 700 1/min. 0.55 kW, 900 1/min. 0.55 kW, 700 1/min. 0.75 kW, 900 1/min.
Protection class/Weight IP 55 15.7 kg IP 55 11.3 kg IP 55 15.7 kg IP 55 17.3 kg
Order No. 0172+803 0172+806 0172+809 0172+812
Motors with protection switch For B70V - 12.1 For B70V - 25.1
Protection class/Weight IP 54 15.7 kg IP 54 11.3 kg IP 54 15.7 kg IP 54 17.3 kg
Order No. 0172+802 0172+805 0172+808 0172+811
Motors, explosion proof For B70V - 12.1 For B70V - 25.1
Protection class II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3
Protection class/Weight IP 54 16.4 kg IP 54 17.2 kg IP 54 18 kg IP 54 15.3 kg
Order No. 0172-801 0172-804 0172-807 0172-810
Compressed air motors For B70V - 12.1 For B70V - 25.1
Type 4 DA, 0.45 kW, 900 1/min., weight 5 kg, 6 DA, 1.0 kW, 900 1/min., weight 10 kg,
operating pressure at 6 bar, operating pressure at 6 bar,
air consumption 55 Nm/h, 87 dB (A) air consumption 80 Nm/h, 87 dB (A)
Air supply thread G 3/8 G 1/2
Order No. 0172-821 0172-822
Compressed air motors with mufer up to an operation pressure at 7 bar, recommended speed (200 - 900 1/min).
Motors with frequency converter For B70V - 12.1 For B70V - 25.1
Type 0.55 kW, 0-900 1/min. 0.55 kW, 0-900 1/min. 0.75 kW, 0-900 1/min.
Protection class/Weight IP 54 13.5 kg IP 54 13.5 kg IP 54 15 kg
Order No. 0172-769 0172-769 0172-768
Three-phase motor
230/400 V, 50 Hz
Efciency level IE 2
( 0.75 kW) according
to directive 2005/32/EC.
Special voltages,
frequencies, protection
classes as well as higher
explosion proof protection
classes on request.
IE2
30
Eccentric screw pump B70V 25.2 and 50.1
When pumping in Zone 0 areas or pumping ammable liquids only
pumps with mechanical seal, universal joint shaft and PTFE stator are
approved.
B70V 25.2/50.1 B70V HD-D25.2/50.1
Wichtige Info!
4
3
2
1
31
Lutz Eccentric screw pump B70V 25.2 and 50.1
P r o d u c t d e t a i l Pump tube B70V
Size 25.2 25.2 25.2 50.1 50.1 50.1
Seal Packing gland (St) MS MS St MS MS St
Drive shaft Torsion shaft (TS) TS UJ UJ TS UJ UJ
Delivery rate* up to l/min. 25 25 25 50 50 50
Delivery head* up to bar 10 10 10 8 8 8
Temp. of medium** max. C 140 140 140 140 140 140
Material pump tube 1.4571 1.4571 1.4571 1.4571 1.4571 1.4571
Immersion tube diameter mm 54 54 54 54 54 54
Pressure joint Outer thread G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2
Weight kg 7 7 7 7 7 7
Length*** mm 1100 1100 1100 1100 1100 1100
(Tmax. 80 C)
(Tmax. 140 C)
Stator PTFE Order No. 0172-254 0173-264 0173-254 0172-504 0173-514 0173-504
(Tmax. 140 C)
B70V HD-D Order No. 0173-266 0173-516
Explosion proof eccentric screw pump approved Category 1 / 2 (acc. to ATEX)
for pumping inammable liquids of the explosion group IIA (B70V) or IIB (B70V HD-D) and temperature class T4
Choice of motors
Motors with cable terminal box For B70V - 25.2 and B70V - 50.1
Type 0.75 kW, 700 1/min. 1.1 kW, 700 1/min. 1.1 kW, 900 1/min.
Protection class/Weight IP 55 17.3 kg IP 55 21 kg IP 55 21.1 kg
Order No. 0172+815 0172+826 0172+818
Motors with protection switch For B70V - 25.2 and B70V - 50.1
Protection class/Weight IP 54 17.3 kg IP 54 21 kg IP 54 21.1 kg
Order No. 0172+814 0172+825 0172+817
Motors, explosion proof For B70V - 25.2 and B70V - 50.1
Type 0,65 kW, 700 1/min. 1,0 kW, 900 1/min.
Protection class II 2 G EEx e II T3 II 2 G EEx e II T3
Protection class/Weight IP 54 20 kg IP 54 20 kg
Order No. 0172-813 0172-816
Compressed air motor For B70V - 25.2 / 50.1
Type 8 DA, 1.7 kW, 900 1/min., weight 14 kg
operating pressure at 6 bar, air consumption 130 Nm/h, 102 db (A)
Air supply thread G 1/2
Order No. 0172-823
Motors with frequency converter For B70V - 25.2 and B70V - 50.1
Type 0,75 kW, 0-900 1/min. 1,1 kW, 0-900 1/min.
Order No. 0172-768 0172-767
Three-phase motor
230/400 V, 50 Hz
Efciency level IE 2
Special voltages,
classes as well as higher
explosion proof protection
classes on request.
IE2
32
Eccentric screw pump B70V 75.1
B70V 75.1
Housing: Stainless steel (1.4571)
Rotor: Stainless steel (1.4571)
Seals: FPM (Viton)
Mechanical seal: Carbon/CrMo-Casting, Viton
Stator material: NBR light, Viton, PTFE
Wichtige Info!
75.1
N
e
w
4
3
2
1
33
Lutz Eccentric screw pump B70V 75.1
P r o d u c t d e t a i l Pump tube B70V
Size 75.1
Seal Mechanical seal (MS) MS
Drive shaft Universal joint shaft (UJ) UJ
Delivery rate* up to l/min. 75
Delivery head* up to bar 8
Temp. of medium** max. C 140
Material pump tube 1.4571
Immersion tube diameter mm 54
Pressure joint Outer thread G 1 1/2
Weight kg 7
Length*** mm 1100
Stator NBR light Order No. 0173-561
(Tmax. 80 C)
Stator Viton Order No. 0173-562
(Tmax. 140 C)
Stator PTFE Order No. 0173-564
(Tmax. 140 C)
* Determined with water at 20 C, three-phase motor (900 rpm) and elastomer stator
Choice of motors
Motors with frequency converter For B70V - 75.1
Type 1.5 kW, 0-900 1/min.
Protection class/Weight IP 54 34 kg
Order No. 0172-766
Compressed air motor For B70V - 75.1
Type 8 DA, 1.7 kW, 900 1/min., weight 14 kg
operating pressure at 6 bar, air consumption 130 Nm/h, 102 db (A)
Order No. 0172-823
Three-phase motor 230/400 V, 50 Hz,
efciency level IE 2 ( 0.75 kW) according to directive 2005/32/EC.
Special voltages, frequencies, protection classes as well as higher explosion proof protection classes on request.
Motors with cable terminal box For B70V - 75.1
Protection class/Weight IP 55 21 kg IP 55 33 kg IP 55 30 kg
Order No. 0172+826 0172-761 0172+829
Motors with protection switch For B70V - 75.1
Order No. 0172+825 0172-760 0172+828
IE2
34
Range 1:
Thin-bodied, lubricating uids such
as wine, milk, oils etc.
< 7000 mPas
Range 2:
Abrasive and viscous uids such
as pulps, adhesives, paints, inks, etc.
< 20,000 mPas
Range 3:
Very abrasive and highly viscous uids
such as honey, greases, syrups, etc.
> 20,000 mPas
Viscosity range:
Up to limit of owabilty
Eccentric screw pump B70V 120.1
B70V 120.1
Seals: FPM (Viton)
Mechanical seal: wc/wc, Viton
Stator material: NBR light, PTFE
* alternative mechanical seel pairing on request.
N
e
w
4
3
2
1
35
Lutz Eccentric screw pump B70V 120.1
Pump tube B70V
Size 120.1
Drive shaft Universal joint shaft (UJ) UJ
Temp. of medium** max. C 140
Immersion tube diameter*** max. mm 131
Pressure joint Outer thread Tri Clamp DN 50 (DIN 32676)
Weight kg 15
Length**** mm 1100
Stator NBR light Order No. 0175-201
(Tmax. 80 C)
(Tmax. 140 C)
* Determined with water at 20 C, three-phase motor (600 rpm and 700 rpm) and elastomer stator
** with PTFE Stator
*** required bung hole 133 mm
**** Special length 500 - 2500 mm on request
Choice of motors
Drive motors
Three-phase motors 230/400 V, 50 Hz, efciency level IE 2,
protection class IP 55 with cable terminal box, protection switch or
integrated frequency converter.
Special voltages, frequencies, protection class on request.
Connection dimensions
acc. IEC 34 part 7
size B14 type M100
36
02-10
EC 1935/2004
B70V-H-SR Sanitary
12.1/25.1/50.1
Seals: EPDM
Mechanical seal: Carbon/SiC/EPDM (optional SiC/SiC/EPDM)
Stator material: PTFE , EPDM (Size 50.1)
0
0 5 10
10
20
30
40
50
60
70
80
25 20 15 30 35 40 45 50
S
o
l
i
d

s
t
a
t
o
r
1
0
.
0
0
0

m
P
a
s
1

m
P
a
s
MD-2 motor with stator 50.1
B70V-H-SR Sanitary 12.1, 25.1 and 50.1
N
e
w
4
3
2
1
37
Pump tube B70V-H-SR Sanitary
Choice of motors
Type 500 W, 230 V 500 W, 230 V 460 W, 230 V 575 W, 230 V 795 W, 230 V
- with speed contr.
Size 12.1 25.1 50.1
Seal Mechanical seal (MS) MS MS MS
Delivery rate* up to l/min. 12 25 50
Delivery head* up to bar 6 6 8
Temp. of medium max. C 100 100 100
Material pump tube 1.4404 1.4404 1.4404
Immersion tube diameter mm 54 54 54
Pressure joint Tri-Clamp DN 50 DN 50 DN 50
Weight kg 7 7 7
Length** mm 1100 1100 1100
Stator EPDM Order No. 0174-516
Stator PTFE Order No. 0174-017 0174-137 0174-517
* Determined with water at 20 C, three-phase motor (900 rpm)
** Special length on request
Accessories Order No.
Hose connection DN 38 to Tri-Clamp DN 50 0172-746
Adaptertting Tri-Clamp DN 50 to thread DIN 11851
Rd 78 x 1/6 (DIN 405) 0172-747
Fastener bracket Tri-Clamp DN 50 (DIN 32676) 1.4401
with seal EPDM 0172-745
Discharge spout Tri-Clamp DN 50 0172-748
Pump foot for drum inliner 0172-771
Type 400 W 400 W 400 W
Operating pressure: 6 bar 6 bar 6 bar
Order No. 0004-087 0004-088 0004-090
Lutz Eccentric screw pump
B70V-H-SR Sanitary 12.1, 25.1 and 50.1 for viscosities up to 30,000 mPas
Motors in special voltages and frequencies on request.
38
/
B70V-H-D Sanitary
12.1/25.1/25.2/50.1
Seals: EPDM
Stator material: PTFE, EPDM (Size 50.1)
Equipped with mounting strap and
motor quick coupling as standard.
B70V-H-D Sanitary 12.1, 25.1, 25.2, 50.1

02-10
EC 1935/2004
N
e
w
4
3
2
1
39
Pump tube B70V-H-D Sanitary
Size 12.1 25.1 25.2 50.1
Seal Mechanical seal (MS) MS MS MS MS
Delivery rate* up to l/min. 12 25 25 50
Delivery head* up to bar 6 6 10 8
Temp. of medium max. C 100 100 100 100
Material pump tube 1.4404 1.4404 1.4404 1.4404
Immersion tube diameter mm 54 54 54 54
Pressure joint Tri-Clamp** DN 50 DN 50 DN 50 DN 50
Weight kg 7 7 7 7
Length** mm 1100 1100 1100 1100
Stator EPDM Order No. 0172-506
Stator PTFE Order No. 0172-007 0172-127 0172-257 0172-507
* Determined with water at 20 C, three-phase motor (900 rpm) ** Special length on request
Adaptertting Tri-Clamp DN 50 to thread DIN 11851, Rd 78 x 1/6 (DIN 405) 0172-747
Fastener bracket Tri-Clamp DN 50 (DIN 32676) 1.4401 with seal EPDM 0172-745
Compressed air motors For B70V - 12.1 For B70V - 25.1 For B70V - 25.2 / 50.1
Type 4 DA, 0.45 kW, 900 1/min., 6 DA, 1.0 kW, 900 1/min., 8 DA, 1.7 kW, 900 1/min.,
Weight 5 kg, Weight 10 kg, Weight 14 kg,
operating pressure at 6 bar, operating pressure at 6 bar, operating pressure at 6 bar,
air consumption 55 Nm/h, air consumption 80 Nm/h, air consumption 130 Nm/h,
87 dB (A) 87 dB (A) 102 dB (A)
Air supply thread G 3/8 G 1/2 G 1/2
Order No. 0172-821 0172-822 0172-823
Lutz Eccentric screw pumps
B70V-H-D Sanitary 12.1, 25.1, 25.2 and 50.1 for viscosities up to 100,000 mPas
Motors with protection switch For B70V-H-D Sanitary - 25.2 For B70V-H-D Sanitary - 50.1
Type 0.75 kW, 700 1/min. 1.1 kW, 900 1/min.
Protection class/Weight IP 54 17 kg IP 54 21.5 kg
Order No. 0172-751 0172-754
Motors with frequency converter For B70V-H-D Sanitary - 25.2 For B70V-H-D Sanitary - 50.1
Order No. 0172-756 0172-757 0172-757
Choice of motors
Motors with protection switch For B70V-H-D Sanitary - 12.1 For B70V-H-D Sanitary - 25.1
Protection class/Weight IP 54 16.5 kg IP 54 11 kg IP 54 16.5 kg IP 55 17 kg
Order No. 0172-750 0172-752 0172-750 0172-753
Motors with frequency converter For B70V-H-D Sanitary - 12.1 For B70V-H-D Sanitary - 25.1
Protection class/Weight IP 54 13.5 kg IP 54 13.5 kg IP 54 15 kg
Order No. 0172-755 0172-755 0172-756
IE2
Three-phase motor
230/400 V, 50 Hz,
RAL 9001,
Efciency level IE 2
Special voltages,
classes on request.
40
75.1
B70V-H-D Sanitary 75.1
Seals: EPDM
Stator material: PTFE
B70V-H-D Sanitary 75.1

02-10
EC 1935/2004
N
e
w
4
3
2
1
41
Adaptertting Tri-Clamp DN 50 to thread DIN 11851, Rd 78 x 1/6 (DIN 405) 0172-747
Fastener bracket Tri-Clamp DN 50 (DIN 32676) 1.4401 with seal EPDM 0172-745
Compressed air motors For B70V - 75.1
Type 8 DA, 1.7 kW, 900 1/min.,
Weight 14 kg,
operating pressure at 6 bar,
air consumption 130 Nm/h,
102 dB (A)
Order No. 0172-823
Lutz Eccentric screw pumps
B70V-H-D Sanitary 75.1 for viscosities up to 100,000 mPas
P r o d u c t d e t a i l Pump tube B70V-H-D Sanitary
Size 75.1
Temp. of medium max. C 100
Immersion tube diameter mm 54
Pressure joint Tri-Clamp DN 50
Weight kg 7
Length** mm 1100
* Determined with water at 20 C, three-phase motor (900 rpm)
** Special length on request
Choice of motors
Motors with cable terminal box For B70V-H-D Sanitary - 75.1
Type 1.5 kW, 700 1/min. 1.5 kW, 900 1/min.
Order No. 0172-763 0172-765
Motors with protection switch For B70V-H-D Sanitary - 75.1
Type 1.5 kW, 700 1/min. 1.5 kW, 900 1/min.
Order No. 0172-762 0172-764
Motors with frequency converter For B70V-H-D Sanitary - 75.1
Type 1.5 kW, 0-900 1/min.
Protection class/Weight IP 54 34 kg
Order No. 0172-758
IE2
Three-phase motor
230/400 V, 50 Hz,
RAL 9001,
Efciency level IE 2
Special voltages,
classes on request.
42
When it comes to handling emulsions or suspensions which tend to
settle out at the bottom of the containers, the MP, mixing and pumping
tube, is an invaluable aid in ensuring that your liquids are gently
re-mixed and homogenised.

From the laboratory to the production
The new Lutz B2 Vario Pump comes with more features and benets
to meet the needs of working in clean and quiet environments. The
speed-controllable motor and the new nozzle in the set version permits
small quantities of liquids to be transferred safely and quietly. The mo-
dular construction permits effortless servicing without special tools.
Ignoring waste and costs are things of the past. The RE pump provides
the solution for reducing waste and avoiding costs through product
loss and waste disposal. Use of the RE means less than 0.1 litre is
left in a standard 200 litre drum.
4
3
2
1
43
Economy
The days are shorter and maybe we should
pause for reection. Is there something we may
have overlooked? Costs perhaps? Our specia-
lised pumps economically take care of the light
tasks, as well as those involving expensive, toxic
or simply dangerous liquids. We do not leave
much to chance, including your budget.
Our sets provide a complete solution, no need to
hunt for the extra accessory. With our modular
system, all our motors are interchangeable with
our pump tubes.
The new Lutz Battery Pump B1 for convenient and safe transfer of small
liquid amounts with the battery-powered laboratory pump from Lutz.
The Pump is also available as a complete pump set with accessories
incorporates the reliable and tested drum pump technology.
44
B2 Vario (polypropylene or stainless steel)
Lutz B2 Vario PP-SL Lutz B2 Vario SS-SL

Housing: PP/PVDF Stainless steel (1.4571)
Impeller: PP ETFE
Seals: none none
Mechanical seals: none none
Drive shaft: Hastelloy C Stainless steel (1.4571)
Ultra quiet variable speed motor with

safety cut-out
Ergonomically designed handles
Direct coupled motor for easy servicing
Hanger for nozzle
Chemically resistant plain bearing
Modular design sealless pump tube with
improved hydraulics
Replaceable pump foot
IP 24
Measured values (10%) determined with water at 20 C. Q (l/min.)
H

(
m

w
c
)
0 10 20 30 40 50 60 70 80 90
MD-200 with PP-SL 32
MD-200 with SS-SL 28
B2-Vario with PP-SL 32
B2-Vario with SS-SL 28
B2-Vario
MD-200
5
10
Impeller R
Also available with
air driven motor MD-200
4
3
2
1
45
Lutz B2 Vario (polypropylene or stainless steel)
for the laboratory and research sector
P r o d u c t d e t a i l Pump Lutz B2 Vario PP-SL 32 Lutz MD-200 PP-SL 32
Drive motor Universal motor 200 W, 230 V, 50 Hz, Air driven motor 200 W,
on/off switch with variable speed operating pressure 6 bar,
controller, double insulated on operating mode S1 (continuous
protection class II, protection class operation), noise level 76 db/A
IP 24, with integrated motor protection
switch, 3 m connection cable
Material: Pump tube PP PP
Impeller PP PP
Type of Impeller R R
Hose connection: Nominal diameter mm 19 19
Outer thread G 1 G 1
Delivery rate* up to l/min. 75 65
Delivery head* up to m wc 7 7
Temperature of medium: up to C - 15 up to + 50 -15 up to + 50
Viscosity** up to mPas 300 300
Density up to kg/dm 1.3 1.3
Weight (kg) motor+pump tube 2.2 - 2.5 2.0 - 2.3
* Determined with water at 20 C ** Determined with oil Special lengths, other voltages and frequencies on request.
Pump Lutz B2 Vario SS-SL 28 Lutz MD-200 SS-SL 28
Drive motor Universal motor 200 W, 230 V, 50 Hz, Air driven motor 200 W,
on/off switch with variable speed operating pressure 6 bar,
controller, double insulated on operating mode S1 (continuous
protection class II, protection class operation), noise level 76 db/A
IP 24, with integrated motor protection
switch, 3 m connection cable
Material: Pump tube Stainless steel 1.4571 PP
Impeller ETFE PP
Type of Impeller R R
Hose connection: Nominal diameter mm 19 19
Outer thread G 1 G 1
Delivery rate* up to l/min. 68 60
Delivery head* up to m wc 6.5 6
Temperature of medium: up to C - 15 up to + 90 -15 up to + 90
Viscosity** up to mPas 300 350
Density up to kg/dm 1.3 1.3
Weight (kg) motor+pump tube 2.9 - 3.5 2.0 - 2.3
* Determined with water at 20 C ** Determined with oil Special lengths, other voltages and frequencies on request.
46
Pump tube RE-PP (polypropylene)
a lesser extent.
Impeller L
RE-PP-MS
Housing: PP
Impeller: PP
Sealing pot: PP
Seals: Viton
Mechanical seal: Carbon, ceramic, Viton
, HC-4 (2.4610)
Bearing: Pure carbon
The closed sealing pot prevents
a return ow when the pump is
removed.
The Sealing pot is open
the liquid is pumped out.
Function
4
3
2
1
47
Pump tube RE-PP (polypropylene)
for complete drum drainage of corrosive and neutral liquids
P r o d u c t d e t a i l Pump tube RE-PP MS
Type of impeller L
Material: Pump tube PP
Impeller PP

MI-4 MI-4-E
Characteristic curve no. 600
- with speed Delivery rate* up to l/min. 70
controller Delivery head* up to m wc 12
Output: 500 W 500 W Viscosity** up to mPas 1000
Voltage: 230 V 230 V Density**** up to kg/dm 1.6
Order No. 0030-000 0030-001 Weight (kg) motor + pump tube 4.0
MA II 3
Output: 460 W 460 W Delivery rate* up to l/min. 60
Voltage: 230 V 230 V Delivery head* up to m wc 11
LVR: no yes Viscosity** up to mPas 800
Density**** up to kg/dm 1.7
Output: 575 W 575 W 575 W Delivery rate* up to l/min. 60
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 11.5
LVR: no yes no Viscosity** up to mPas 1200
acid-proof Density**** up to kg/dm 2.0
Order No. 0060-001 0060-009 0060-091 Weight (kg) motor + pump tube 6.6
MA II 7 Characteristic curve no. 603
MD-1 MD-2
Operating Delivery head* up to m wc 12
Pressure: 6 bar 6 bar Viscosity** up to mPas 1000
48
Pump tube RE-SS (stainless steel)
a lesser extent.
Impeller L
RE-SS-MS
Impeller: ETFE
Sealing pot: ETFE/stainless steel (1.4571)
Seals: FEP coated
Mechanical seal: Carbon, ceramic, PTFE,
HC-4 (2.4610), stainless steel (1.4571)
Function
safe version (FDA)
removed.
4
3
2
1
49
for complete drum drainage of corrosive and neutral liquids
Prevents the pump from
starting up again without
warning after a power failure.
Its recommended when
pumping hazardous liquids.
Pump tube RE-SS MS
Type of impeller L
Category 1 / 2 (acc. to ATEX) yes
Material: Pump tube 1.4571
Impeller ETFE
MI-4 MI-4-E
controller Delivery head* up to m wc 17
MA II 3
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 14
MA II 7
MD-1 MD-2
B4/GT
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 8.5
Protection Viscosity** up to mPas 600
Switch: no yes Density**** up to kg/dm 2.2
Order No. 0004+019 0004+067 Weight (kg) motor + pump tube 14.0
IE2
50
Pump tube MP-PP (polypropylene)
a lesser extent.
MP-PP-MS
Housing: PP/PVDF
Impeller: PP
Seals: Viton
Mechanical seal: Carbon, SiC, Viton
, HC
Bearing: ETFE/PTFE
Mix/Pump
Pump
Function
Impeller L
Impeller R
4
3
2
1
51
Pump tube MP-PP (polypropylene)
Pump tube MP-PP MS MP-PP-SL
Material: Pump tube PP PP PP PP
Impeller PP PP PP PP

MI-4 MI-4-E Characteristic curve no. 801 802 801 802
- with Speed Delivery rate* up to l/min. 160 87 160 87
controller Delivery head* up to m wc 8,5 19 8,5 19
Order No. 0030-000 0030-001

Order No. 0060-000 0060-008
MA II 5 MA II 5 MA II 5 S Characteristic curve no. 805 806 805 806
Order No. 0060-001 0060-009 0060-091
Order No. 0060-002 0060-010

MD-1 MD-2 Characteristic curve no. 809 810 810 809
Order No. 0004-087 0004-088
52
Pump tube MP-SS (stainless steel)
a lesser extent.
Impeller R
MP-SS-MS
Impeller: ETFE
Seals: Viton

(FEP coated)
Stainless steel (1.4571), HC-4 (2.4610)
Mix/Pump
Pump
Function
safe version (FDA)
4
3
2
1
53
Pump tube MP-SS MS
Type of impeller R
Impeller ETFE

MI-4 MI-4-E
contoller Delivery head* up to m wc 10
Order No. 0030-000 0030-001
Weight (kg) motor + pump tube 6.0
MA II 3
Order No. 0060-000 0060-008
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 10

MA II 7

Order No. 0060-002 0060-010

MD-1 MD-2
Order No. 0004-087 0004-088
B4/GT
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 10.5
Protection Viscosity** up to mPas 400
Switch: no yes Density**** up to kg/dm 2.0
Order No. 0004+019 0004+067
for mixing and pumping of corrosive and neutral liquids
IE2
54
Set 3 Set 4
For thin-bodied alkalis For thin-bodied acids
Imm. depth: 1000 mm Order-No. 0205-101 0205-111
Consisting of:
Motor MI-4, pump tube PP 41-L-SL SS (Set 3), PP 41-L-SL HC (Set 4), 2 x hose connection
PP 3/4, 2 m PVC fabric hose 3/4, 2 x hose clips 3/4, nozzle PP with sealing FEP (Set 3),
nozzle PP (Set 4), drum adapter PP
Density: max. 1.4 kg/dm
Viscosity: max. 500 mPas
Delivery rate: max. 85 l/min. (50 l/min.)*
Delivery head: max. 19 m wc
Set 3
Set 5
Set 1
For aqueous uids Lutz B2 Vario Lutz MD-200 Lutz MD-300
PP-SL 32 PP-SL 32 PP-SL 32
Imm. depth: 500 mm Order-No. 0205-020 0205-065 on request

Consisting of:
Pump, Lutz-nozzle, 2 x hose clips 3/4, 1.5 m PVC hose 3/4, wall bracket
Density: max. 1.3 kg/dm max. 1.3 kg/dm max. 1.5 kg/dm
Viscosity: max. 300 mPas max. 300 mPas max. 500 mPas
Delivery rate: max. 75 l/min. max. 65 l/min. max. 85 l/min.
(22 l/min.)* (22 l/min.)* (22 l/min.)*
Delivery head: max. 7 m wc max. 7 m wc max. 7 m wc
Air driven motor MD-200/MD-300
also available with pump tube in aluminium
For aqueous uids Lutz B2 Vario Lutz MD-200 Lutz MD-300
SS-SL 28 SS-SL 28 SS-SL 28

Consisting of:
Pump, Lutz-nozzle, 2 x hose clips 3/4, 1.5 m PVC hose 3/4, wall bracket
Density: max. 1.3 kg/dm max. 1.3 kg/dm max. 1.5 kg/dm
Viscosity: max. 300 mPas max. 350 mPas max. 500 mPas
Delivery rate: max. 68 l/min. max. 60 l/min. max. 85 l/min.
(22 l/min.)* (22 l/min.)* (22 l/min.)*
Delivery head: max. 6.5 m wc max. 6 m wc max. 12 m wc
For highly aggressive acids and alkalis
Imm. depth: 1000 mm Order-No. 0205-201
Consisting of:
Motor MA II 5, pump tube PVDF 41-L-SL, hose connection PTFE 3/4, 2 m special chemical
hose 3/4, 2 x hose clips 3/4, nozzle PVDF, hose connection turnable, drum adapter PP
Set 4
Ready for action
Lutz Pump Sets
Set 2
* Specied values are maximum values determined with water at 20C, measured directly at the pressure joint. Viscosity determined with oil.
When using a nozzle the delivery rate is reduced to approximate values (see brackets). Customized sets available on request.
4
3
2
1
55
Set 7
For light viscous mineral oil products

Consisting of:
Motor MI-4, pump tube Alu 41-L-SL, hose connection Alu 1, 2 m PVC fabric hose 1,
2 x hose clips 1, nozzle aluminium, hose connection brass 1, drum adapter PP
Set 6
For easily ammable hydrocarbons

Consisting of:
Motor ME II 3, pump tube SS 41-L-SL, 2 x hose connection brass, 2 m solvent hose 3/4,
nozzle brass/PTFE, equipotential bonding cable, drum adapter PP (without ex plug)
For all hazardous uids

Consisting of:
Motor ME II 3, pump tube SS 41-L-SL, 2 x hose connection SS, 2 m universal chemical hose 3/4, nozzle SS
with sealing FEP, equipotential bonding cable, drum adapter PP (without ex plug)
Set 8
Lutz Pump Sets
Ready for action
Set 9 Set 10
Suitable for complete drum drainage Suitable for complete drum drainage
for easily ammable hydrocarbons for all hazardous uids
Set 10
Set 9
Consisting of:
Motor ME II 3, pump tube RE-SS 41-L-MS,
2 x hose connection brass, DN 19,
2 m solvent hose 3/4, nozzle brass/PTFE,
equipotential bonding cable,
drum adapter PP (without ex plug)
Consisting of:
Motor ME II 3, pump tube RE-SS 41-L-MS,
2 x hose connection SS, DN 19,
2 m universal chemical hose 3/4, nozzle
SS with sealing FEP, equipotential bonding cable,
drum adapter PP (without ex plug)
56
IP 55 available at additional cost. With or without low voltage-release
Electric driven
Choice of motors
IP 24
IP 54
IP 54/IP 55
Type Nominal
voltage
V
Frequency
Hz
Nominal
power
W
Weight
kg
Order-No.
(with Low
voltage-release)
Order-No.
(without Low
voltage-release)
MI-4-230 220-230 50 450-500 2.8 - 0030-000
MI-4-230 E 220-230 50 450-500 2.8 - 0030-001
MI-4-230 230 60 400 2.8 - 0030-015
MI-4-230 E 230 60 400 2.8 - 0030-016
MI-4-120 110-120 50-60 550-640 2.8 - 0030-003
MI-4-120 E 110-120 50-60 550-640 2.8 - 0030-006
MI-4-100 E 100 50-60 520-550 2.8 - 0030-008
Type Nominal
voltage
V
Frequency
Hz
Nominal
power
W
Weight
kg
Order-No.
(Cable terminal
box)
Order-No.
(Protection
switch)
B4/GT 230-400 50 750 10.0 0004+019 0004+067
Type Nominal
voltage
V
Frequency
Hz
Nominal
power
W
Weight
kg
Order-No.
(with Low
voltage-release)
Order-No.
(without Low
voltage-release)
MA II 3 220-230 50 430-460 4.6 0060-008 0060-000
100-120 50-60 430 4.6 0060-016 0060-044
MA II 5 220-230 50 540-575 5.4 0060-009 0060-001
220-230 60 450-490 5.4 0060-043 0060-042
100-120 50-60 510 5.4 0060-017 0060-045
42 50 520 5.4 0060-014 0060-006
24 = 400 5.4 0060-015 0060-007
MA II 5 S 220-230 50 540-575 5.4 - 0060-091
100-120 50-60 510 5.4 - 0060-094
MA II 7 220-230 50 790-795 6.6 0060-010 0060-002
100-120 50-60 700 6.6 0060-018 0060-046
With or without speed controller
For continuous operation
Type Nominal
voltage
V
Frequency
Hz
Nominal
power
W
Weight
kg
Order-No.
(with Low
voltage-release)
Order-No.
(without Low
voltage-release)
ME II 3 220-230 50 430-460 5.5 0050-000 0050-016
100-120 50 380-440 5.5 0050-003 -
110-120 60 400-460 5.5 0050-006 0050-009
ME II 5 220-230 50 540-580 6.3 0050-001 0050-017
220-230 60 475-515 6.3 0050-034 0050-035
110 50 510 6.3 - 0050-004
24 = 400 6.3 0050-013 0050-015
ME II 7 220-230 50 750-795 7.5 0050-002 0050-018
ME II 8 220-230 50 880-930 8.0 0050-042 0050-041
IP 54
4
3
2
1
57
Choice of motors
Air driven
Type Operating
pressure
bar
Nominal
power
W
Weight
kg
Order-No.
MD-1 6 400 1.1 0004-087
MD-2 6 400 1.5 0004-088
MD-3 6 400 2.1 0004-090
Type Operating
pressure
bar
Nominal
power
W
Weight
kg
Order-No.
MD-200 6 200 0.8 0004-160
MD-300 6 300 0.9 0004-170
MD-2
MD-3
MD-1
MD-200
(Internal mufer)
MD-300
(External mufer)
58
Getting started
In keeping with our philosophy of making life
safe and simple, we have a complete range of
accessories available for you.
From the humble wall bracket to protect your
pump, connectors to t your hose size, to bon-
ding and grounding wires to protect your em-
ployees, nothing has been overlooked.
To reduce the risk of spillage, we have nozzles
available in five different materials, poly-
propylene, PVDF, stainless steel, brass and
aluminium.
To avoid fumes or emissions from drums or
containers, we have specialised drum adapters,
and when it comes to accurate measurement
or process control, we have a full range of ow
meters to cater to your needs. The latter not only
cover thin and thick uids, but also ammable
and explosive liquids.
Prevents emissions of harmful gases and
vapours when lling and emptying.
Protects the operator as well as the environment from
noxious, toxic and/or severely oxidising emissions.
All that is needed is a single drum adapter with two
integrated valves.
For exible operation with nozzle or stationary
operation by xed union.
A check valve is integrated into the gas displacement pipe,
to prevents back-ow.
For xed installations the thread and diameter sizes can
be supplied to match the container opening.
For IBC containers suitable container caps are available.
Larger dimensioned air valves are available
for emptying of 1000 l vessels.
Concern about air pollution has never been so widespread as
it is today. Acting on its sense of environmental responsibility,
Lutz has further developed its emission proof drum adapter
as a complete gas displacement system. When pumping
or storing hazardous liquids in the container, any harmful
gases or vapours present remain in a closed system. The
pressures inside and outside of the vessel are compensated.
This means that the vessel does not collapse even when fast
emptying is required.
EMIGA: emission proof drum adapters
4
2
1
59
3
At a glance
Accessories
0 For the delivery of easy ammable liquids (e. g. ethanol, petrol) or in hazardous locations For more information please have a look into our accessories leaet.
0 Flow meter
Lifting device
0 Equipotential bonding cable
0 Explosion proof plug
0 Explosion proof socket
Check valve
Hoist
0 Nozzle
0 Turning knuckle
Hose connection
Hose connection, rotatable
Hose clamp
0 Hose connector
Reducing sleeve
Quick-action hose coupling
1
2
3.1
4
5
6
3
14
15
19
20
21
22
16
0 Hose
0 Emission proof drum adapter
Drum adapter
Installation ange
0 Foot strainer
0 Discharge spout
Wall bracket
0 Clamping device 7
8
10
11
12
13
9
23
24
4 4
7
4
3
8
8 4
10
12
15
14
3.1
3
6
0 5 0 5
0
8
2
1
13
22
20
11
9
0
0
0
0
0
0
0
16
0
0
19
24
23
21
0
60
If we were to go into the subject of explosion
protection with all its guidelines and speci-
cations and all the protective measures that
are derived from them, this would more than
exceed the scope of our catalogue. Nevertheless,
we would like to include a few explanations and
make a few statements with respect to the basics
of this subject.
The prerequisite for a potential explosion hazard
is the development of an explosive atmos-
phere. Such an atmosphere can arise wherever
ammable gases or liquids are manufactured,
processed, transported and stored. Particularly
in chemical factories, reneries, storage tank
installations, paint factories, lling stations, etc.,
it is possible for such hazardous locations to
exist. These are locations in which explosive
atmospheres with potentially dangerous levels
can arise due to the environmental and operatio-
nal conditions that prevail. Consequently, there
is an explosion hazard.
The term explosion is understood as being a
rapidly occurring combustion process for which
three essential conditions must be prevalent
simultaneously:
ammable gases, oxygen (air) and an ignition
source such as the ignition sparks of electrical
equipment (brush sparking).

When is necessary?
However, it is an unavoidable necessity at many
industrial locations to run electrical equipment
in an explosive atmosphere. The precautions
that have to be taken against an explosion oc-
curring are stipulated by the national or other
authorities responsible for safety. These autho-
rities lay down constructional requirements for
the electrical equipment and issue specications
with respect to their installation and operation.
In addition to the concepts of electrical equip-
ment, hazardous locations and explosive
atmosphere mentioned above, another impor-
tant factor is the ignition temperature of a com-
bustible substance. This is the lowest measured
temperature of a heated wall, located in a test
apparatus, at which the combustible substance
mixed with air is still capable of igniting itself.
The ammable gases and vapours of ammable
liquids are classied according to their ignition
temperature.
The term type of enclosure refers to measures
built into electrical equipment during manu-
facture to prevent this equipment from igniting
the explosive atmosphere in which it is located.
As a result, electrical equipment is categorised
into groups and classes in accordance with the
European norms. According to EN/IEC 60079-0,
electric drum and container pumps for use in
hazardous locations belong to Group II (Explo-
sion Group II).
Designation Euro Norm Explanation Area of
Application
Ex d EN/IEC Explosion proof enclosure: Zones 1 + 2
60079-1 Parts that are capable of igniting an explosive
atmosphere are enclosed in a special housing.
Should an explosion occur within, it is so designed
that it can withstand the resultant pressure.
Ex e EN/IEC Increased-safety enclosure: Zones 1 + 2
60079-7 Measures have been taken to provide a greater degree
of safety by preventing impermissibly high
temperatures and the generation of sparks or arcing.
Ex i EN/IEC Intrinsic safety: Zones 1 + 2,
60079-11 Circuit in which it is not possible for a spark Zone 0 after
or thermal effect to arise which could cause a special test
specic explosive atmosphere to ignite.
Ex m EN/IEC Encapsulation: The potential source Zones 1 + 2
60079-18 of a spark is encapsulated.
4
3
2
1
61
Safety
When it comes to keeping warm, we make sure
you are not in the re. Our pumps and motors
are certied to the latest ATEX standards and
offer protection against hazardous and highly
ammable liquids, or hazardous environments.
Your safety is our concern.
A subdivision of Group II into A, B and C is also
stipulated for a number of types of enclosure,
whereby the ammability of gases and vapours
belonging to Group IIA is the lowest and that
of gases and vapours in Group IIC the highest.
Consequently, we have had our explosion proof
drum and container pumps tested in this group.
The temperature class of a piece of electrical
equipment is dependent on the maximum
surface temperature measured at an ambient
temperature of 40 C. The classes range from
T1 to T6.
Of the various types of enclosure possible, only
explosion proof enclosure (EN/IEC 60079-1),
increased-safety enclosure (EN/IEC 60079-7)
and intrinsic safety (EN/IEC 60079-11) are of
relevance to Lutz electric drum pumps.
The Lutz ME II motors are explosion proof in
accordance with European standards EN/IEC
60079-0, EN/IEC 60079-1 and EN/IEC 60079-7
and approved for protection class Ex de IIC T6.
In addition to these safety features, the version
with double insulation also ensures additional
safety for equipotential bonding. Live compo-
nents are isolated from the accessible external
surfaces and from the pump tube.
62
a lesser extent.
Impeller L
Impeller R
SS-MS SS-SL
Impeller: ETFE ETFE
Seals: Viton
none
Mechanical seal: Carbon, ceramic, Viton
, none
Stainless steel
Bearing: Pure carbon Pure carbon
Q (l/min.)
H

(
m

w
c
)
Q (l/min.)
H

(
m

w
c
)
4
3
2
1
63
Pump tube SS-MS SS-SL
power failure. In the hazardous
location, motors with low-
voltage release are absolutely
prescribed.
Category 1 / 2 (acc. to ATEX) yes yes yes yes
Material: Pump tube 1.4571 1.4571 1.4571 1.4571
ME II 3
LVR: yes no Viscosity** up to mPas 200 350 200 350

ME II 5

ME II 7
ME II 8
MD-1 MD-2 MD-3
Pressure: 6 bar 6 bar 6 bar Viscosity** up to mPas 400 500 400 500
Order No. 0004-087 0004-088 0004-090
for highly inammable liquids
64
HC-SL
Housing: HC-22 (2.4602)
Impeller: ETFE
Seals: Viton (FEP coated)
Bearing: ETFE, Carbon
Drive shaft: HC-4 (2.4610)
Please remember that the ow rate is reduced as the viscosity increases. The
density of the pumped liquid similarly affects the ow rate, though to a lesser
extent.
553
555
561
559
557
Impeller L
Impeller R
Q (l/min.)
H

(
m

w
c
)
Q (l/min.)
H

(
m

w
c
)
Measured values ( 10%) determined with water at 20 C and drive motors 230 V.
Measured values ( 10%) determined with water at 20 C and drive motors 230 V.
4
3
2
1
65
Low-voltage release (LVR.):
location, motors with low-voltage
release are absolutely
predcribed.
for highly inammable chemicals
P r o d u c t d e t a i l Pump tube HC-SL
Type of impeller L R
Category 1 / 2 (acc. to ATEX) yes yes
Temperature of medium: up to C 120 120
Material: Pump tube HC HC
Impeller ETFE ETFE
Hose connection: Nominal diameter mm 19-32 19-32
Outer thread G 1 1/4 G 1 1/4
ME II 3
LVR.: yes no Viscosity** up to mPas 350 200
ME II 5
ME II 7
ME II 8

MD-1 MD-2 MD-3
Output: 400 W 400 W 400 W Flow rate* up to l/min. 110 210
Operating- Delivery head* up to m ws 20 12
pressure: 6 bar 6 bar 6 bar Viscosity** up to mPas 500 400
Order No. 0004-087 0004-088 0004-090 Weight (kg) Motor + pump tube 5.9 5.9
66
a lesser extent.
Impeller L
RE-SS-MS
Impeller: ETFE
Sealing pot: ETFE/stainless steel (1.4571)
Seals: FEP coated
HC-4 (2.4610), stainless steel (1.4571)
Function
removed.
4
3
2
1
67
prescribed.
Pump tube RE-SS MS
Type of impeller L
Impeller ETFE
ME II 3
LVR: yes no Viscosity** up to mPas 500
Order No. 0050-000 0050-016
ME II 5
ME II 7
ME II 8
MD-1 MD-2 MD-3
Pressure: 6 bar 6 bar 6 bar Viscosity** up to mPas 700
Order No. 0004-087 0004-088 0004-090
for complete drum drainage of highly inammable liquids
4
3
2
1
68
a lesser extent.
MP-SS-MS
Impeller: ETFE
Seals: Viton

(FEP coated)
Stainless steel (1.4571), HC-4 (2.4610)
Mix/Pump Pump
Function
Impeller R
4
3
2
1
69
prescribed.
for mixing and pumping of highly inammable liquids
P r o d u c t d e t a i l Pump tube MP-SS MS
Type of impeller R
Impeller ETFE
ME II 3
ME II 5
ME II 7
ME II 8
Voltage: 230 V 230 V Delivery head* up to m wc 14.5

MD-1 MD-2 MD-3
Pressure: 6 bar 6 bar 6 bar Viscosity** up to mPas 400
Order No. 0004-087 0004-088 0004-090
70
Table of dimensions drum and container pumps
Pump tubes C D E F H J K L M N P
Immersion
depth
700 1000 1200 700 1000 1200
PP 41 701 1001 1201 656 956 1156 22 41 56 110 G 1 1/4 58 140 110 4 x 14
PVDF 41 701 1001 1201 656 956 1156 22 41 56 110 G 1 1/4 58 140 110 4 x 14
Alu 41 701 1001 1201 656 956 1156 22 41 56 80 G 1 1/4 58 140 110 4 x 14
SS 41 700 1000 1200 660 960 1160 3 41 55 80 G 1 1/4 56 140 110 4 x 14
HC 42 1009 1209 960 1160 22 42 56 80 G 1 1/4 56 140 110 4 x 14
RE PP 714 1014 1214 598 898 1098 41 G 1 1/4 58
RE SS 680 980 1180 640 940 1140 41 G 1 1/4 56
MP PP 1001 1201 901 1101 50 G 1 1/4 58
MP SS 975 1200* 935 1160* 41 G 1 1/4 56
*Dimension is referred to Immersion depth 1225
Motors A B
PP 41 PVDF 41 Alu 41 SS 41 HC 42 RE PP RE SS MP PP MP SS
MI-4 162 316 316 316 322 322 314 346 316 346
MA II 3 179 357 357 357 363 363 355 387 357 387
MA II 5 179 372 372 372 378 378 370 402 372 402
MA II 5S 179 392 392 392 398 398 390 422 392 422
MA II 7 179 396 396 396 402 402 394 426 396 426
ME II 3 179 377 377 377 383 383 375 407 377 407
ME II 5 179 392 392 392 398 398 390 422 392 422
ME II 7/8 179 416 416 416 422 422 414 446 416 446
MD-1 (Ex) 100 211 211 211 217 217 209 241 211 241
MD-2 (Ex) 159 239 239 239 245 245 237 269 239 269
MD-3 (Ex) 180 245 245 245 251 251 243 275 245 275
B4/GT-750-IP54 205 392 392 392 398 398 390 422 392 422
B4/GT-750-IP54
with protection switch
265 392 392 392 398 398 390 422 392 422
A Width of motor
B Motor to discharge centre
C Foot of pump to discharge centre
H Foot strainer diameter
M Flange diameter
D Immersion length
J Flange bottom to centre of discharge
N Pitch circle diameter
E Base of pump foot to base of strainer
K Discharge outer thread
P Bolt centre ange diameter
F Pump tube diameter
L Pump centre to discharge end
Dimensions in mm
71
Dimensions in mm
B C D F L
500 700 1000 500 700 1000
Lutz B2 Vario
PP-SL 32
255 500 700 1000 460 660 960 32 98
Lutz B2 Vario
SS-SL 28
266 490 690 990 450 650 950 28 83
B C D F L R T
Lutz B2
MD-200 PP
133 1000 960 32 98 91
Lutz B2
MD-200 Alu
133 1000 960 32 98 91
Lutz B2
MD-200 SS
145 990 950 28 83 91
Lutz B2
MD-300 PP
125 1000 960 32 98 91 104
Lutz B2
MD-300 Alu
125 1000 960 32 98 91 104
Lutz B2
MD-300 SS
137 990 950 28 83 91 104
*utilisable immersion depth
Output Frame size A B
0.55 kW M 71 236 442
0.75 kW M 80 255 478
Dimensional drawing
Container pump B50
Dimensional drawing
Lutz B2 Vario
Dimensional drawing
Lutz B2 MD-200/MD-300
a
d
j
u
s
t
a
b
l
e
Adaptor to
suit diameter
72
Dimensions in mm
Dimensional drawing
Eccentric screw pump HD-E
U
t
i
l
i
s
a
b
l
e

i
m
m
e
r
s
i
o
n

d
e
p
t
h
Dimensional drawing
eccentric screw pump
B70V-SR 12.1-50.1
Condenser motor
A B
Frame size M 80 255 435
A B C D
1000 1100 1000 1100
MA II 3 179 301
MA II 5 179 316
MA II 5 S 179 336
MA II 7 179 340
ME II 3 179 321
ME II 5 179 336
ME II 7 179 360
ME II 8 179 360
MI-4 162 260
MD-1 (Ex) 100 155
MD-2 (Ex) 159 183
MD-3 (Ex) 180 189
12.1 1030 985
25.1 1030 985
50.1 1130 1085
Dimensional drawing
Eccentric screw pump
B70V-H-SR Sanitary 12.1-50.1
A B
MA II 3 179 301
MA II 5 179 316
MA II 5 S 179 336
MA II 7 179 340
MI-4 162 260
MD-1 (Ex) 100 155
MD-2 (Ex) 159 183
MD-3 (Ex) 180 189
Tri-Clamp DN 50
DIN 32676
73
Dimensional drawing
B70V-H-D Sanitary 12.1-75.1
Dimensions in mm
Dimensional drawing
B70V 120.1
*
**
utilisable immersion depth
dimension max. 350 with frequency converter
or protection switch
Tri-Clamp
DN 50
DIN 32676
depending on
motor size
Dimensional drawing
B70V-D 12.1-75.1
Size 12.1 25.1 25.2 50.1 75.1
Immersion
depth
1000 1000 1100 1100 1100
C 1035 1035 1135 1135 1135
D 990 990 1090 1090 1090
*
**
utilisable immersion depth
dimension max. 350 with requency converter
or protection switch
Tri-Clamp
DN 50
DIN 32676
74
Type 4 DA
Type 8 DA
Type 6 DA
Flange IEC #72
Dimensional drawing of anges for eccentric screw pump B70V
Dimensions of compressed air motors
for eccentric screw pump B70V
Dimensional drawing
B70V 12.1-75.1
(compressed air)
Motor
connecting
dimensions
Frame size V18
Standard construction
90 S
Adapter ange for
three-phase motors
Adapter ange for
compressed air motors
(6 DA and 8 DA)
Shaft diameter
14 mm, 19 mm, 24 mm 28 mm 19 mm, 24 mm
Shaft length
30 - 50 mm 60 mm 40 mm, 50 mm
Order No.
0172-850 0172-851
thick
thick
A B C D N
1000 1100 1000 1100
4 DA

160 117 G 3/8
6 DA

200 163 G 1/2
8 DA

200 199 G 1/2
12.1 1030 985
25.1 1030 985
25.2 1130 1085
50.1 1130 1085
75.1 1130 1085
thick
Flange IEC #72
Flange IEC #72
75
To ensure that you can operate and service your
Lutz pump or motor, where ever you are, or else
need some more information concerning your
purchase, we have available on the internet
under the title Service, test and CE Confor-
mity certicates, spare part lists, data sheets
and dimensional drawings, all of which may
be downloaded. If you have misplaced your
operating manual or need a second copy, we
would be pleased to send you another. In any
Test certicate
Operating instruction
Spare part list
Customer Service
case should you feel more comfortable calling
or writing to us directly for any advice, please
do so. We look forward to hearing from you.
Data sheet
76
Argentina
Aserbaidschan
Australia
Austria
Belarus
Belgium
Bosnia and
Herzegovina
Brazil
Bulgaria
Canada
Chile
China
Croatia
Cyprus
Czechia
Denmark
Egypt
Finland
France
Ghana
Great Britain
Greece
Hong Kong
Hungary
India
Indonesia
Iraq
Ireland
Iceland
Italy
Japan
Kasachstan
Korea
Lithuania
Luxembourg
Macedonia
Malaysia
Mexico
Montenegro
Netherlands
New Zealand
Norway
Peru
Philippines
Poland
Portugal
Rumania
Russia
Saudi Arabia
Serbia
Singapore
Slovakia
Slovenia
South Africa
Spain
Sri Lanka
Sweden
Switzerland
Syria
Taiwan
Thailand
Tunisia
Turkey
Turkmenistan
Ukraine
U.A.E.
USA
Usbekistan
Venezuela
Vietnam
Lutz representation world wide:
Order-No. 0699-208 Bo. 3.000/11.12
Professional Fluid Management
Founded in 1954 Lutz Pumpen has distinguished itself by producing quality products, and has built up a sound
reputation for safety in the pumping eld led by its expertise in the drum and container market. Successively, other
products have been added in order to cater to the needs of our customers. We are indebted to all our loyal custo-
mers who have often been the source of our many innovations, as we sought to provide them with the solutions
they required.
In this brochure, we would like to take this opportunity to give you an overview of our product range. Naturally, we
welcome any enquiries you may have, so please do not hesitate to contact us or one of our ofces or distributors
for further help or assistance.
Lutz is represented world wide in over sixty countries. Our distributors are trained by us and are ready to assist you.
To nd out more please see our web site www.lutz-pumpen.de
Lutz Pumpen GmbH
P.O. Box 14 62 D-97864 Wertheim
Tel.: (+49 93 42) 8 79-0 Fax: (+49 93 42) 87 94 04
e-mail: [email protected]
w w w . l u t z - p u m p e n . d e

Lutz Catalogue

Uploaded by

Copyright:

Available Formats

Lutz Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lutz Catalogue

Uploaded by

Copyright:

Available Formats

Dear Reader

Drum and Container Pumps

for viscosities from 500 to 4000 mPas

Ultra quiet variable speed motor with

Mechanical seal: Carbon, ceramic, Viton

Mechanical seal: Carbon, SiC, Viton

You might also like