Scribd Logo
Upload

Welcome to Scribd!

  • 150 views

    Alloy 7050 Tech Sheet Rev

    Uploaded by

    Doni N Rahman
    Alloy 7050 is an aluminum alloy that provides a combination of strength, stress corrosion cracking resistance, and toughness, making it well-suited for aircraft applications requiring thick plate. It exhibits better properties than alloy 7075 in thicker gauges. Alloy 7050 plate is available in tempers T7651 and T7451, while sheet is available as bare or Alclad in temper T76. Alcoa has been a major supplier of alloy 7050 since the 1970s.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Alloy 7050 Tech Sheet Rev

    Uploaded by

    Doni N Rahman
    150 views4 pages
    Alloy 7050 is an aluminum alloy that provides a combination of strength, stress corrosion cracking resistance, and toughness, making it well-suited for aircraft applications requiring thick plate. It exhibits better properties than alloy 7075 in thicker gauges. Alloy 7050 plate is available in tempers T7651 and T7451, while sheet is available as bare or Alclad in temper T76. Alcoa has been a major supplier of alloy 7050 since the 1970s.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Alloy 7050 is an aluminum alloy that provides a combination of strength, stress corrosion cracking resistance, and toughness, making it well-suited for aircraft applications requiring thick plate. It exhibits better properties than alloy 7075 in thicker gauges. Alloy 7050 plate is available in tempers T7651 and T7451, while sheet is available as bare or Alclad in temper T76. Alcoa has been a major supplier of alloy 7050 since the 1970s.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    150 views4 pages

    Alloy 7050 Tech Sheet Rev

    Uploaded by

    Doni N Rahman
    Alloy 7050 is an aluminum alloy that provides a combination of strength, stress corrosion cracking resistance, and toughness, making it well-suited for aircraft applications requiring thick plate. It exhibits better properties than alloy 7075 in thicker gauges. Alloy 7050 plate is available in tempers T7651 and T7451, while sheet is available as bare or Alclad in temper T76. Alcoa has been a major supplier of alloy 7050 since the 1970s.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    ALCOA MILL PRODUCTS

    ALLOY 7050 PLATE AND SHEET


    BEST COMBINATION OF PROPERTIES

    ALLOY 7050
    D E S C R I P T I O N Alloy 7050 is the premier choice for aerospace applications requiring the best combination of strength, stress corrosion cracking (SCC) resistance and toughness. It is particularly suited for plate applications in the 3 to 6 inch (76.20 to 152.40mm) thickness range. Alloy 7050 exhibits better toughness/corrosion resistance characteristics than alloy 7075. Because it is less quench sensitive than most aerospace aluminum alloys, 7050 retains its strength properties in thicker sections while maintaining good stress corrosion cracking resistance and fracture toughness levels. Alloy 7050 plate is available in two tempers: T7651 combines the highest strength with good exfoliation corrosion resistance and average SCC resistance; and T7451 (formerly T73651) provides better SCC resistance and excellent exfoliation resistance at slightly lower strength levels. Alloy 7050 sheet is available bare and Alclad in the T76 temper. Alcoa developed alloy 7050 and has been the major supplier of this alloy since the early 1970s. T H I C K P L A T E F A B R I C A T I O N I M P R O V E M E N T S

    Through the application of statistical process control techniques recently implemented at Alcoas Davenport, Iowa plant, additional quality improvements have been made to thick gauges of 7050 plate. The resulting reduction of microporosity significantly improves the short transverse properties. This makes Alcoa 7050 plate a good choice where ST loadings are a design factor. A P P L I C A T I O N S Typical applications for alloy 7050 plate include fuselage frames and bulkheads where section thicknesses are 2 to 6 inches (50.8 to 152.40mm). Typical applications for alloy 7050 sheet include wing skins. The major usage is in plate applications requiring thicknesses over 2 inches (50.8mm) where 7050 has superior properties. CHEMICAL COMPOSITION LIMITS (WT %) Si . . . . . . . 0.12 Zn . . . . . . . . . Fe . . . . . . . 0.15 Zr. . . . . . . . . . Cu . . . . . . . 2.0-2.6 Ti . . . . . . . . . . Mn . . . . . . 0.10 Others, each . . Mg . . . . . . 1.9-2.6 Others, total . . Cr . . . . . . . 0.04 Balance . . . . . Note: Value maximum if range not shown.

    . . . . . .

    5.7-6.7 0.08-0.115 0.06 0.5 0.15 Aluminum

    M E C H A N I C A L

    P R O P E R T I E S

    7050-T7651 PLATE (ALL GAUGE RANGES NOT SHOWN) GUARANTEED MINIMUM LONG TRANSVERSE MECHANICAL PROPERTIES. ALLOY 7075-7651 PROPERTIES SHOWN FOR COMPARISON. 7050-T7651 0.250-1.000 2.001-3.00 (6.35-25.40) (50.83-76.20) 76 (524) 66 (455) 8 76 (524) 66 (455) 7 7075-T651 2.500-3.000 (63.5-76.20) 72 (496) 61 (421) 5

    Thickness: in. (mm) Tensile Strength, ksi (MPa) Yield Strength, ksi (MPa) Elongation %

    7050-T7451 PLATE (ALL GAUGE RANGES NOT SHOWN) GUARANTEED MINIMUM LONG TRANSVERSE MECHANICAL PROPERTIES. ALLOY 7075-T7351 PROPERTIES SHOWN FOR COMPARISON. Thickness: in. (mm) Tensile Strength, ksi (MPa) Yield Strength, ksi (MPa) Elongation % 7050-T7451 0.250-2.000 5.001-6.00 (6.35-50.80) (127.03-152.40) 74 (510) 64 (441) 9 70 (483) 60 (414) 4 7075-T7351 3.501-4.000 (88.93-101.60) 61 (421) 48 (331) 6

    7050-T76 SHEET (ALL GAUGE RANGES NOT SHOWN) TENTATIVE GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES. Thickness: in (mm) Tensile Strength, ksi (MPa) Yield Strength, ksi (MPa) Elongation % Bare 0.063-0.187 (1.60-4.75) 77 (531) 67 (462) 7 Clad 0.063-0.187 (1.60-4.75) 73 (503) 62 ( 427) 7

    F R A C T U R E

    T O U G H N E S S

    Alloy 7050 is one of a group of controlled-toughness, high-strength alloys as defined by The Aluminum Associations Document T-5 (See References). 7050-T7651 PLATE (ALL GAUGE RANGES NOT SHOWN) GUARANTEED MINIMUM KIc FRACTURE TOUGHNESS VALUES: ksi!in. (MPa!m) Test Direction: Thickness Range 1.001-2.000 in. (25.42-50.80mm) 2.001-3.000 in. (50.83-76.20mm) L-T 26 (28.6) 24 (26.4) T-L 24 (26.4) 23 (25.3) S-L 20 (22)

    7050-T7451 PLATE (ALL GAUGE RANGES NOT SHOWN) GUARANTEED MINIMUM KIc FRACTURE TOUGHNESS VALUES: ksi!in. (MPa!m) Test Direction: Thickness Range 1.001-2.000 in (25.42-50.80mm) 5.001-6.000 in. (127.03-152.40mm) L-T 29 (31.9) 24 (26.4) T-L 25 (27.5) 22 (24.2) S-L 21 (23.1)

    F A T I G U E

    P R O P E R T I E S

    In general, the fatigue propertiesincluding fatigue crack propagationare similar to other highstrength 7XXX aluminum alloys. For complete data on the numerous tests conducted, refer to Alcoa Green Letter No. 220.

    ALLOY 7050
    C O R R O S I O N R E S I S T A N C E

    Long-term controlled and in-service evaluations have shown alloy 7050 plate and sheet products to maintain equal exfoliation and stress corrosion resistance at higher strength levels compared with other high strength alloys such as 7075. The T76 temper of alloy 7050 provides highest strength with excellent resistance to exfoliation corrosion. SCC resistance in this temper is adequate for most service applications where sustained tensile stresses in the short-transverse direction can be controlled to relatively low levels. The T74 temper (formerly T736) is intended for more demanding SCC applications, such as certain interference fits or other sustained short transverse loaded structures. T H E R M A L T R E A T M E N T S

    The recommended practices for heat-treating and aging 7050 plate and sheet are described in MIL-H6088, Heat Treatment of Aluminum Alloys. F I N I S H I N G Procedures used for cleaning, anodizing, conversion coating and painting alloy 7050 are generally similar to those used for alloy 7075. P R O C U R E M E N T Plate Temper Specification MIL-HDBK-5 Coverage Temper Specification MIL-HDBK-5 Coverage 7050-T7651 AMS-4201 Approved 7050-T7451 AMS 4050D Approved S P E C I F I C A T I O N S 7050-T76 Tentative specification and design allowables are available.

    Sheet Temper Specification MIL-HDBK-5 Coverage

    O T H E R

    P R O D U C T

    F O R M S

    Forgings, extrusions, and fasteners in Alloy 7050 are also available. REFERENCES: 1. Alcoa Green Letter No. 220 2. The Aluminum Association, Position on Fracture Toughness Requirements and Quality Control Testing T-5 3. MIL-H-6088, Heat Treatment of Aluminum Alloys The plate tempers shown in the following tables are guaranteed K I c minimum values. Kc values for sheet are available from your Alcoa sales representative.

    PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

    ALCOA MILL PRODUCTS, INC.


    P.O. BOX 8025 BETTENDORF, IOWA 52722 (800) 523-9596 www.millproducts-alcoa.com E22-14752

    You might also like