Pumps+Valves4 MudGateValves 081129

D E L I V E R I N G PERFORMANCE
DRILLING PRODUCTS
M U D L I N E G A T E V A L V E S
INTRODUCTION MUD LINE GATE VALVES INTRODUCTION
Baker SPD
MUD LINE GATE VALVES
Baker SPD Mud Line Gate Valves conform to API Flange dimensions and pressure ratings. They are designed for dependable service in high pressure systems and in pump and standpipe manifold systems. The seats are designed to provide a positive, tight shut off every closing cycle, even after long exposure to abrasion and scoring. Twin metal wear inserts, encapsulated in an elastomer, form a cylindrically shaped plug made up of a gate slot and two flowports. Once closed, line pressure forces the gate up against the downstream port seals which are tested up to 7,500 psi. The 4 in. 5000 Working Pressure (WP) thru 5 x 4 in. 7500 WP valve has a transparent stem cover which protects and reveals gate open/close position. Stem packing is self-adjusting on all sizes.
2 in. Screwed End 2000 - 5000 WP
5-1/8 in. Flanged End 7500 WP
6 x 5-1/8 in. Weld End 7500 WP
3 in. Flanged End 2000 - 5000 WP
3 in. Weld End 2000 - 5000 WP
GENERAL INFORMATION GENERAL INFORMATION

GENERAL APPLICATIONS
Water, oil, and gas lines Wellheads Pipelines and manifolds Abrasive drilling mud Sour gas and crude oil Up to 7,500 psi and temperature range of -40F to 400F
Baker SPD
STANDARD TRIM INCLUDES

A-487 Steel Body and Bonnet Stainless Steel (SS) Stem and Gate Steel Buna-N Seats 90 Durometer A Buna-N Seals Note: See Material Specification on pages 22 and 25 for optional trims.
SIZES
Full Port - 2 in., 3 in., 4 in., 4-1/16 in., and 5-1/8 in. Regular Port - 5 x 4 in., 6 x 4 in., and 6 x 5 in.
MATERIAL TRACEABILITY
Certification provided upon request at additional charge.
DNV Lloyds of London Type Approval PSL 1 and 2
CONNECTIONS
Screwed End Weld End Ring Type Joint (RTJ), Flanged End
.
TESTING AND PRESSURE RATINGS

All Mud Gate Valves are hydrostatically tested. Working Pressure (WP) 2000 WP 3000 WP 5000 WP 7500 WP Shell Test Pressure 4,000 psi Test 6,000 psi Test 10,000 psi Test 11,250 psi Test
Baker SPD
MATERIAL NUMBER SCHEME
BASE MATERIAL NUMBER

1st to 3rd Digits Full Port - 930 API 6A ID - 932 Regular Port - 934
SIZE
5th Digit (2 in. - 1) (3 in. -3) (4 in., 4-1/16 in. - 4) (5 x 4 in. - 4), (5-1/8 in., 6 x 4 in. - 5) (6 x 5-1/8 in. - 8)
GATE/STEM MATERIAL
7th Digit 316 SS/316 SS Stem - 3 316 SS with Tungsten Carbide Coating/316 SS Stem - 4 17-4 PH/316 SS Stem - 5 17-4 PH/410 SS Stem - 6
BODY MATERIAL
9th Digit No Coating - 0 Baker 10 - 1 Baker 12 - 3
I XXX
X I
I X
X I
I X
X I SEAT MATERIAL
8th Digit
I X
WORKING PRESSURE
4th Digit 2000 - 4 3000 - 5 5000 - 6 7500 - 8
END CONNECTION
6th Digit LP-0, NUE-1, EUE-2, Screwed: Short/Long Casing Thread-E Weld: XXH-4 , SCH 160-5 Flanged: RTJ-7 Buna-N Steel 316 SS 410 SS B M N/A
Viton N/A N N/A
90DPC N/A Z N/A
92D Buna-N J N/A P
7,500 WP only. 7,500 WP is available in SCHXXH only.
Digit
0 6
Code 10th Digit Description

Not Required Q.A and Testing to API 6D only (Same requirements as D certified) Statement of Compliance Hydrostatic Test Report Statement of Compliance Mill Certs Hydrostatic Test Report
Digit
0 1 2

Not Required PSL 1 Requirements PSL 2 Requirements PSL 3 Requirements - with Amendment PSL 2 Requirements - with PSL 1 Test PSL 1 Requirements - with M.P.I. PSL 1 Requirements - DYE Penetrant Standard Testing - PSL 1 Requirements MPI and DYE Penetrant Standard Testing - DYE Penetrant Standard Testing - Magnetic Particle Inspection (MPI) Standard Testing - DYE Penetrant and MPI Standard Testing - Radiograph Standard Testing - PSL 2 Requirements MPI, DYE Penetrant and Hardness
Digit
0 B

Not Required I.R.C. - Independent Design Review Certificate NACE MR0175 Documentation
3 4
5 6 7
S T U
I.R.C. and NACE MR0175 Documentation 3rd Party Inspection 3rd Party Inspection and I.R.C.
Statement of Compliance Mill Certs Hydrostatic Test Report Charpy Impacts-Pressure Containing Part
D M
V W
3rd Party Inspection and NACE 3rd Party Inspection/I.R.C./NACE MR0175 Documentation
Statement of Compliance Mill Certs Hydrostatic Test Report Charpy Impacts-Pressure Containing Part Hydrostatic Test Chart
P R T
Special
Note: For Non-Standard Assemblies, 7th through 12th digits will be assigned by Baker SPD.
.
12
MATERIAL NUMBER REPAIR KITS

MATERIAL NUMBER REPAIR KITS
Size Working Pressure Metal Repair Kit, (Standard) Rubber Repair Kit, (Standard) Rubber Repair Kit, (H2S) Major Repair Kit, (Standard) Major Repair Kit, (H2S) Minor Repair Kit, (Standard) Minor Repair Kit, (H2S) 2 3 2x3 3 in. 7500 WP 051965610 051965621 051965622 051965631 051965632 051965641 051965642 4 in. 2-3000 WP 051965310 051965321 051965322 051965331 051965332 052089941 052089942 4 5x4 6x4 in. 5000 WP 052092310 052092321 052092322 052092331 052092332 052089941 052089942 4 5x4 in. 7500 WP 051965510 051965521 051965522 051965531 051965532 051965541 051965542 4-1/16 in. 3000 WP 051965310 052137821 052137822 052136131 052136132 052137841 052137842
Baker SPD
5-1/8 6 x 5-1/8 in. 7500 WP 052137910 052137921 052137922 052137931 052137932 052137941 052137942
in. in. 2-5000 WP 051965410 051965421 051965422 051965431 051965432 051965441 051965442 052090010 052090021 052090022 052090031 052090032 052090041 052090042
in. 5000 WP 052092310 052150621 052150622 052137731 052137732 052137841 052137842
Standard/H2S Service Metal Repair Kit Includes:

2 in., 2 x 3 in., 3 in., 4 in., and 5 x 4 in. 2-7500 WP (1) Gate (1) Stem 5-1/8 in., and 6 x 5-1/8 in. 7500 WP (1) Gate (1) Stem (2) Wear Ring
Standard/H2S Service Rubber Repair Kit Includes:

2 in., 2 x 3 in., and 3 in. 2-7500 WP (1) Stem Screw Seal (1) Secondary Seal (1) Stem Seal Assembly (1) Bonnet Seal (1) Seat 4 in., 5 x 4 in. 2-7500 WP, and 6 x 4 in. 5000 WP (1) Stem Screw Seal (1) Secondary Seal (1) Stem Seal Assembly (1) Bonnet Seal (1) Seat (2) Bearing (5,000 and 7,500 psi only) 5-1/8 in., and 6 x 5-1/8 in. 7500 WP (1) Seat (2) Seat Seal (1) Bonnet Seal (1) Stem Seal Assembly (1) Packing Retainer Seal (1) Bonnet Cap Seal (1) Locking Cap Screw Seal
Major Standard/H2S Service Repair Kit Includes:

2 in., 2 x 3 in., and 3 in. 2-7500 WP (1) Gate (1) Stem (1) Seat (1) Bonnet Seal (1) Secondary Seal (1) Stem Screw Seal (1) Stem Seal Assembly 4 in., 5 x 4 in., 6 x 4 in. 2-5000 WP, and 4 in., 5 x 4 in. 7500 WP (1) Gate (1) Stem (1) Seat (1) Bonnet Seal (1) Secondary Seal (1) Stem Screw Seal (1) Stem Seal Assembly (2) Bearing (5,000 and 7,500 psi only) (1) Key 5-1/8 in., and 6 x 5-1/8 in. 7500 WP (2) Wear Ring (1) Gate (1) Stem (1) Seat (2) Seat Seal (1) Bonnet Seal (1) Stem Seal Assembly (1) Packing Retainer Seal (1) Bonnet Cap Seal (1) Locking Cap Screw Seal
Minor Standard/H2S Service Repair Kit Includes:

All Sizes (1) Bonnet Seal (1) Seat (1) Gate
13

Pumps+Valves4 MudGateValves 081129

Uploaded by

Copyright:

Available Formats

Pumps+Valves4 MudGateValves 081129

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pumps+Valves4 MudGateValves 081129

Uploaded by

Copyright:

Available Formats

D E L I V E R I N G PERFORMANCE

INTRODUCTION MUD LINE GATE VALVES INTRODUCTION

2 in. Screwed End 2000 - 5000 WP

5-1/8 in. Flanged End 7500 WP

6 x 5-1/8 in. Weld End 7500 WP

3 in. Flanged End 2000 - 5000 WP

3 in. Weld End 2000 - 5000 WP

GENERAL INFORMATION GENERAL INFORMATION

STANDARD TRIM INCLUDES

DNV Lloyds of London Type Approval PSL 1 and 2

TESTING AND PRESSURE RATINGS

MATERIAL NUMBER SCHEME

BASE MATERIAL NUMBER

Viton N/A N N/A

90DPC N/A Z N/A

92D Buna-N J N/A P

7,500 WP only. 7,500 WP is available in SCHXXH only.

Code 10th Digit Description

Code 11th Digit Description

Code 12th Digit Description

MATERIAL NUMBER REPAIR KITS

in. 5000 WP 052092310 052150621 052150622 052137731 052137732 052137841 052137842

Standard/H2S Service Metal Repair Kit Includes:

Standard/H2S Service Rubber Repair Kit Includes:

Major Standard/H2S Service Repair Kit Includes:

Minor Standard/H2S Service Repair Kit Includes:

You might also like