3gen 400-600

400W/600W Configurable Switch Mode Power Supply
4 slot package size

FEATURES
1 to 8 isolated outputs with full user configurability 1.45V to 28V standard output voltages Isolated Bias Supply Voltage 5V @ 50mA Class B Conducted Emissions 400 and 600 Watts of output power Series and parallel capability Zero load operation EN61000-3-2 compliant Universal input Fully floating outputs Individual control signals on each module Modular construction Industry standard footprint 3 Year warranty
3gen provides an instant, no compromise power solution for any power requirements where a unique set of voltage and current requirements is needed. Excelsys has coupled a 2 transistor forward converter front end with planar magnetic main transformer technology and modular magnetic amplifier output stages to provide a fast turn-around, production line built power solution that can be matched to meet your exact requirements for Volts and Amps. Configured units may be shipped within 48 hours to your exact set point requirements complete with CE and UL approval and fully compliant to EN61000-3-2. Designed as a cost effective solution for single piece or volume production runs, the 3G4B and 3G4C series provide up to 600Watts of output power in a 270 x 127 x 65mm rugged extruded aluminium package. Power connections are made using quality screw terminal connections and primary and secondary controls enable power channels to be individually margined, enabled, paralleled or stacked to provide literally millions of power solutions to match your needs. Design resources available from our web site www.coolpowersolutions.fi include safety certification, CB reports, CAD profile drawings, handbooks and configuration software tools. SINGLE OUTPUT MODULES Module 1 Module 2 1 Slot 1 Slot 1 Slot 1 Slot 2 Slots
NOMINAL RANGE Imax
5V 12V 18V 24V 5V

NOMINAL
(3 to 5.6V) (5 to 13V) (8 to 20V) (12 to 28V) (1.45 to 5.6V)

RANGE
30A 20A 15A 12A 80A

Imax
APPLICATIONS INCLUDE
Industrial equipment Test and measurement Telecommunications Peripherals Audio/broadcast Automation Linear and rotary motion
Module 3 Module 4 Module 70
DUAL OUTPUT MODULE Module 5 Module 6 1 Slot 1 Slot
24V 24V 5V 24V
(10 to 28V) (10 to 28V) (3 to 5.6V) (10 to 28V)
3A 3A 10A 3A
PRINCIPLE OF OPERATION
HIGH FREQUENCY MAGNETIC AMPLIFIER
385VDC BUS
L N E EMI FILTER
CURRENT SHAPING BOOST CONVERTER
TWO TRANSISTOR FORWARD CONVERTER
HIGH FREQUENCY MAGNETIC AMPLIFIER
HIGH FREQUENCY MAGNETIC AMPLIFIER EMI SHIELDING PLANAR TRANSFORMER
Cool Power Solutions Oy

Keskustie 6 FIN-01900 Nurmijrvi Finland Tel: +358-9-2906 1990 Fax: +358-9-2906 1991 Email: [email protected] Web : www.coolpowersolutions.fi
400W & 600W AC/DC Configurable Switch Mode Power Supplies

SPECIFICATION All specifications are typical at nominal input, full load at 25C unless otherwise stated
OUTPUT SPECIFICATIONS Maximum power (Note 1) Output adjustment Line regulation Load regulation Cross regulation Transient response Temperature coefficient Ripple and noise Overvoltage protection Overcurrent protection Thermal protection Mains failure signal Output isolation Margin Minimum load Turn-on delay Remote sense Single outputs only Option 03, 05, 06 or 07 (Note 6) (Note 5) (Note 4) (Note 3) 50% load change Input module B Input module C (Note 2) 400W 600W Multi-turn potentiometer 0.1% 0.2% 0.2% typ. <10%, <0.5ms 0.02%/C 1.0% or 100mV pk-pk Standard on all outputs Individual current limit Standard 5ms warning EMC CHARACTERISTICS Emissions: Conducted Immunity: Electrostatic discharge Radiated RFI Fast transients - burst Input line surges Conducted RFI Voltage dips EN55022, FCC EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-11 Level B Level 4 Level 3 Level 3 Class 3 Level 3 Compliant
GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Switching frequency Approvals and standards Leakage current Weight (Note 11) Input/output Input/chassis (Note 9) 20ms typ after loss of AC power 82% typ. 3000VAC 1500VAC 200kHz IEC60950, UL1950 CSA22.2 No. 950 1.25mA, 250VAC, 60Hz 2.5kg LxWxH See AN105 270 x 127 x 65 mm 400,000 hours
Each single and dual output fully floating
See AN105 for individual module margin capabilities (Note 7) Zero 500ms 0.5V drop
Size MTBF
ENVIRONMENTAL SPECIFICATION Operating temperature (See derating curve) See AN105 -20C to +50C Derate 2.5% per C up to +70C -40C to +85C Non-condensing 5% to 95% RH 10-200Hz, 1.5G 3000 bumps, 10G (16ms) half sine
INPUT SPECIFICATIONS Input voltage range Input frequency range Inrush current Harmonic distortion NOTES
1 2 3 4 5 For higher power applications please see 6 slot datasheet. Outputs are user adjustable or factory set to your requested voltage. 25% to 75% load change. Whichever is greater. 20MHz bandwidth. (See AN105 for specification below 0C). Straight line on all outputs. On Module 70 current limit adjustable from 50% to 110%. Optional foldback on Module 70. Contact Cool Power Solutions Oy for details and AN105. 100V isolation between each output and 500V to chassis. All outputs except Module 70, which has 5.0% minimum load for full specification. Contact factory for 400Hz operation. For nominal output voltages and full load. The specifications contained in this data sheet are believed to be correct at time of publication. Specifications are subject to change without notice. This product is not intended for use as a stand alone unit and must be installed by authorised personnel in order to maintain approvals.
Universal input (Note 8) 230VAC @ 25C (Power factor)
88 to 264VAC 125 to 370VDC 47Hz to 63Hz 50A max. EN61000-3-2
Storage temperature Relative humidity Shock Vibration

DERATING CURVE
Output Power (Watts) 100% % Rated Total Case Load
50%
6 7 8 9 10 11
-20C -10C 0C 10C 20C 30C 40C 50C 60C 70C
Ambient Temperature C
TYPICAL EMISSIONS TO EN55022 LEVEL B

dB uV 100 90 80 70 60 50 40 30 20 10 0 0.15 1 10 30 MHz
QP AV


MECHANICAL SPECIFICATIONS
1.38 (35.00) 7.87 (200.00) Third angle projection 1.28 (32.50) 2.56 (65.00) SIDE VIEW 1.38 (35.00)
Connectors: J1 Line Input Connector J2 Options See AN105 for Pin-out J3 Output Signals See AN105 for Pin-out J4 Output Connector
1.38 (35.00)
AIRFLOW
7.87 (200.00)
1.38 (35.00)
J4
J3
J2
SLOT A SLOT B TOP VIEW SLOT C SLOT D
1.36 (34.70)
2.36 (60.00)
5.00 (127.00)
Accessories: 61069 Parallel Link 61070 Series Link 362D010 U Link OPCONN4 Mating Connector for options + Module 1-6 signals OPCONN6 Mating Connector for Module 70 signals
1.27 (32.30)
J1
0.39 (10.00)
1.63 (41.5)
All Dimensions Inches (mm) Mounting Holes [M4] on Base and Side Max screw penetration is 4mm
3gen 4 SLOT STANDARD OPTIONS

03 05 06 07 Mains Mains Mains Mains Power Power Power Power Fail Fail Fail Fail + + + + Logic Logic Logic Logic Enable Inhibit Enable + Bias Supply Voltage Inhibit + Bias Supply Voltage
OUTPUT SIGNALS
Output control signals are available on all output modules. Modules 1 to 6 Power good signal Output inhibit signal Remote adjust (margin) Module 70 Additional Features (See AN105) Adjustable Current Limit Foldback or Straight Line Current limiting Bias Voltage Selectable Output Inhibit or Enable
Options: Mutually exclusive
(Dual output modules: output signals available on first [top] output only).
HOW TO ORDER
Replace (-) with K if production configuration is required
3G 4 C 1 2 2 5 - 05
Note: Calculate power requirements by summing output powers calculated at NOMINAL output voltages. Series Number of slots Power Slot A Slot B Slot D Slot C Option code
Use 0 for unfilled slots.
3
Specification of power supply detailed above:
4 slot series Maximum output power: 600W 5V @ 30A; 12V @ 20A; 12V @ 20A; 24V @ 3A; 24V @ 3A Mains Power Fail Signal + Logic Inhibit
Production configuration:
Units are shipped with nominal output voltages unless production configuration is specified. Excelsys can configure to your exact requirements, through use of appropriate parallel and series busbars and through voltage adjustment to specific set points. Please refer to configuration sheet for details (MD-3GCONFIG-05/00) and for part number assignment to our website at www.coolpowersolutions.fi

3gen FLEXIBILITY
Using Modules in Parallel
+S +V 0V -S
Using Modules in Series

+S +V 0V -S
+S +V 0V -S
+S +V 0V -S
Notes: Maximum current = (I1 + I2) x .9 Use two parallel links (P/N 61069)
Notes: Maximum voltage to chassis is 500V Use series link (P/N 61070) Reverse bias diodes may be required for certain applications, eg. large capacitive loads Notes: Where the sensing point is remote from the output of the power supply, to avoid spurious noise pick-up it may be necessary to: 1 2 Use twisted pair sense wires. Use R C as shown (R1 = 100) (R2 = 10) (C = 22F).
Remote Adjustment +Vout LOW Trim Margin HIGH Trim 0V
Remote Sensing
R1
+S +V 0V -S
C + R2 C +
Mains Power Fail Signal
Output Power Good Signal
Notes: See Application Note AN105, or visit our website www.coolpowersolutions.fi for full details.
Input Mains Power Fail Signal AC OK... Optocoupler Conducting (See AN105)
Module Output Voltage
Module Power Good (Module 1 to 6) Module Power Good (Module 70)
Global Inhibit (Reverse Logic for Global Enable)

Global Inhibit
Module Inhibit
Module Inhibit
All Output Voltages
Module Voltage
Doc. 40004 rev. 03 07/02


3gen 400-600

Uploaded by

Copyright:

Available Formats

3gen 400-600

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3gen 400-600

Uploaded by

Copyright:

Available Formats

400W/600W Configurable Switch Mode Power Supply

4 slot package size

5V 12V 18V 24V 5V

(3 to 5.6V) (5 to 13V) (8 to 20V) (12 to 28V) (1.45 to 5.6V)

30A 20A 15A 12A 80A

Module 3 Module 4 Module 70

DUAL OUTPUT MODULE Module 5 Module 6 1 Slot 1 Slot

24V 24V 5V 24V

(10 to 28V) (10 to 28V) (3 to 5.6V) (10 to 28V)

CURRENT SHAPING BOOST CONVERTER

TWO TRANSISTOR FORWARD CONVERTER

HIGH FREQUENCY MAGNETIC AMPLIFIER

HIGH FREQUENCY MAGNETIC AMPLIFIER EMI SHIELDING PLANAR TRANSFORMER

Cool Power Solutions Oy

400W & 600W AC/DC Configurable Switch Mode Power Supplies

Each single and dual output fully floating

Universal input (Note 8) 230VAC @ 25C (Power factor)

88 to 264VAC 125 to 370VDC 47Hz to 63Hz 50A max. EN61000-3-2

Storage temperature Relative humidity Shock Vibration

-20C -10C 0C 10C 20C 30C 40C 50C 60C 70C

TYPICAL EMISSIONS TO EN55022 LEVEL B

Cool Power Solutions Oy

400W & 600W AC/DC Configurable Switch Mode Power Supplies

SLOT A SLOT B TOP VIEW SLOT C SLOT D

3gen 4 SLOT STANDARD OPTIONS

Options: Mutually exclusive

Replace (-) with K if production configuration is required

Use 0 for unfilled slots.

Cool Power Solutions Oy

400W & 600W AC/DC Configurable Switch Mode Power Supplies

Using Modules in Series

Remote Adjustment +Vout LOW Trim Margin HIGH Trim 0V

Mains Power Fail Signal

Output Power Good Signal

Module Output Voltage

Module Power Good (Module 1 to 6) Module Power Good (Module 70)

Global Inhibit (Reverse Logic for Global Enable)

All Output Voltages

Doc. 40004 rev. 03 07/02

Cool Power Solutions Oy

You might also like