Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    B.Tech. (Sern. - 3'd) Theory of Machines - I Sub - Iect Code: Me-203 Paper ID: (AO8O2)

    Uploaded by

    draculagurdeep
    This document appears to be an exam for a Theory of Machines course. It contains three sections - Section A with 10 multiple choice questions, Section B with 4 short answer questions, and Section C with 2 long answer questions. The document provides instructions to candidates on which sections and questions to attempt. It gives details on the total number of questions, pages, possible marks, and asks candidates to fill in their subject code and paper ID on the answer sheet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    B.Tech. (Sern. - 3'd) Theory of Machines - I Sub - Iect Code: Me-203 Paper ID: (AO8O2)

    Uploaded by

    draculagurdeep
    26 views2 pages
    This document appears to be an exam for a Theory of Machines course. It contains three sections - Section A with 10 multiple choice questions, Section B with 4 short answer questions, and Section C with 2 long answer questions. The document provides instructions to candidates on which sections and questions to attempt. It gives details on the total number of questions, pages, possible marks, and asks candidates to fill in their subject code and paper ID on the answer sheet.

    Original Description:

    paper 2

    Original Title

    me3-tom1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document appears to be an exam for a Theory of Machines course. It contains three sections - Section A with 10 multiple choice questions, Section B with 4 short answer questions, and Section C with 2 long answer questions. The document provides instructions to candidates on which sections and questions to attempt. It gives details on the total number of questions, pages, possible marks, and asks candidates to fill in their subject code and paper ID on the answer sheet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views2 pages

    B.Tech. (Sern. - 3'd) Theory of Machines - I Sub - Iect Code: Me-203 Paper ID: (AO8O2)

    Uploaded by

    draculagurdeep
    This document appears to be an exam for a Theory of Machines course. It contains three sections - Section A with 10 multiple choice questions, Section B with 4 short answer questions, and Section C with 2 long answer questions. The document provides instructions to candidates on which sections and questions to attempt. It gives details on the total number of questions, pages, possible marks, and asks candidates to fill in their subject code and paper ID on the answer sheet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Roll n*o.

    dy ww.iitl
    5tl DJbuil/ry
    uLi' uut
    il
    Total No. of
    Questions
    : 091 tTotal
    No. of Pages : 02
    B. Tech.
    (Sern.
    -
    3' d)
    THEORY OF MACHINES
    -
    I
    SUB.IECT CODE : ME-203
    Paper I D :
    [ AO8O2]
    [Note:
    Please fill subject code and paper ID on OMR]
    Time : 03 Hours
    {&ttytvy
    outu?/eeti4dp4t,cerr"*uximum
    Marks : 60
    lnstruction
    to Candidates:
    l) Section
    -
    A is ComPulsorY.
    2) Attempt any Four questions from Section
    -
    B.
    3) Attempt any Two questions from Section
    -
    C.
    Section
    -
    A
    Ql )
    Q0x2=20)
    )
    What do you mean by kinematics pair?
    b) What are the functions of governors?
    c) What is the higher pair give suitable example?
    d) What do
    You
    mean bY inversion?
    e) What do you mean by coefficient of fluctuation of speed?
    0
    Explain the term hunting of governors.
    g) Expiain the conditions of correct steering.
    h) Explain briefly tangent cam profile.
    i) Give the types of cam and followers.
    j) What do you. mean by isochronisms?
    Section
    -
    B
    Q2)
    Discuss the functions of double slider crank chain.
    @
    x 5
    =
    20)
    Q3)
    Explain the effect of slip on velocity ratio during relativ-e motion between
    pul l ey and bel t .
    R-988
    PTO.
    I
    Q4)
    Derive the expression for torque in simple plate clutch assuming uniform
    wear Condition
    Q5)
    Briefly explain the belt transmission dynamometers.
    Q6)
    Two parallel shafts, connected by a crossed belt, are provided with pulleys
    460 mm and 620 mm in diameters. The distance between the centre lines
    of the shaft is 3 m. Find by how much the length of the belt should be
    changed if it is desired to alter the direction of rotation of the driven shaft?
    Section
    -
    C
    ( 2xI 0- 20)
    Q7)
    Each ball of a porter governor has a mass of 3 kg and the mass of the
    sleeve is 15 kg. the governor has equal anns each200 mm long and pivoted
    on the axis of rotation. When the radius of rotation of the balls is 120 mm,
    the sleeve begins to rise and 160 mm at the maximum speed. Determine
    (a) the range of speed
    (b)
    the lift of rhe sleeve
    (c) the effort of the governor
    (d) the power of the governor
    Q8)
    A cam with a minimum radius of 25 mm is to be designed of a knife edge
    '
    follower with the following data:
    -
    To. raise the follower through 35 mm during 60' rotation of the cam.
    -
    Dwell for next 40' of the cam rotation.
    -
    Descending of the follower during the next 90' of the cam rotation.
    -
    Dwell during the rest of the cam rotation.
    Draw the profile of the cam if the ascending and descending of the cam is
    with simple harmonic motion and the line of stroke of the follower is
    offset 10 mm from the axis of the cam shaft.
    What is the maximum velocity and acceleration of the follower during the
    ascent and the descent if the cam rotates at 150 rpm?
    Qq
    The centre to centre distance between the two sprockets of a chain drive is
    600 mm. The chain drive is used to reduce the speed from 180 rpm to
    90 rpm. The driving sprocket has 18 teeth and a pitch circle diameter of
    480 mm Determine
    (a)
    number of teeth on the driven sprocket
    (b) pitch and the length of the chain.
    wun*a[sut{ects4you.com
    trntr
    )
    R-988

    You might also like