Since 1964, the leader in effective, safe and reliable products for fisheries conservation.

Knowledgeable biologists depend upon Smith-Root equipment.

USER'S MANUAL

LR-20 Series

Includes models LR-20 (200w) and LR-20B (400W)

SMITH-ROOT, INC.
Products for Fisheries Conservation

WWW.SMITH-ROOT.COM

09441.03

USER'S MANUAL

LR-20 Series Backpack Electrosher

Operation and maintenance

COnTenTs
Introduction. ..................................................................... 1 Overview............................................................................ 2 Controls & Connectors. ................................................... 4 Packframe. ........................................................................ 6 Cable Strain Relief Clips. ................................................ 7 Operation. ......................................................................... 8 Safety Features.................................................................. 9 Electrofishing Safety....................................................... 11 Battery Care & Maintenance. ....................................... 13 Battery Maintenance & Diagnostic equipment. .......... 19 Electrode Pole Testing.................................................... 20 Cathode Testing. ............................................................. 21 Electrode/Cathode Tester............................................... 21 LR-20 Operation Hints. ................................................. 22 Cleaning & Maintenance............................................... 22 Model 12/15 Settings Chart. .......................................... 23 Specifications................................................................... 24

Items manufactured by companies other than Smith-Root carry the original manufacturers warranty. Please contact product manufacturer for return instructions.
All Smith-Root, Inc. manufactured products are covered by a one-year warranty. Credit & Refund Policy: Customers returning equipment, in new condition, will be given credit within five days from the date of the return. A return authorization must accompany returns. Valid equipment returns include, but are not limited to, ordering incorrect equipment, funding deficits, and defective equipment returned for reimbursement. All returns are subject to a restocking fee and applicable shipping charges. The restocking fee is figured at 10% of the purchase price but not less than $20.00. Customers receiving equipment in damaged condition will be referred to the shipping company for insurance reimbursement.
09441.03, 2009 Smith-Root, Inc. Vancouver, WA - USA

2009

LR-20 LR-20B BACKPACK ELECTROFISHER

&

INTRODUCTION

offers the safety and ruggedness of the LR-24 with the reliability of our classic Model 12, while using the accessories of our standard LR-24. Either the LR-20 or the higheroutput LR-20B is an ideal transitional unit from our classic Model 12; it shares many conventions as well as the safety and reliability and accessories of the LR-24. Use them for light-duty electroshing or in conjunction with LR-24 units for wider eld applications. The LR-20 Series is a good addition to your collection of Electroshers in order to cover all eld conditions.
The LR-20 series comes available in two different models; the 200 Watt LR-20 and the 400 Watt LR-20B. The controls and procedures for both units are virtually identical. This manual covers both models.

The LR-20 Series Backpack Electrosher

SAFETY FEAT EA URES: EAT

Emergency shut-down switch disables the unit Flashing red output warning light Audible output warning system Tilt sensor Water immersion turns output off Electrode out of water output off Pole mounted operator switch Non-conductive case Quick release shoulder harness and waist belt

THE LR-20B COMBO CONSISTS OF:

1 - Electrode Pole 6' 2PC...............................07575 1 - 11" Aluminum Electrode Ring..................03297 1 - Rattail Electrode.......................................06821 2 - 24V 7 Ah Battery.....................................06681 1 - BC-24ps Battery Charger (USA) ...............06815 1 - Case w/Wheels & Retractable Handle......09540

www.smith-root.com

OVERV ER IEW ERV

CONTROLS AND FEAT FEA URES
Take the time to familiarize yourself with the LR-20's features before beginning electrofishing.

USER'S MANUAL

Timer Reset Duty Cycle Output Frequency

Pack Frame

Cover Latch Emergency Shutdown Switch

Lcd Display

Voltage Range Switch

Audio Alarm Cover Latch Sensor

Warning Light

Immersion Sensor Cathode Connector

Harness

Anode Connector

24v Battery

Control Connector

Battery Connector

2009

LR-20 LR-20B BACKPACK ELECTROFISHER

& OVERVIEW (Cont.)

OUTPUT FREQUENCYUENCY controls the output frequency or UENCYpulses per second of the electrofisher.
V O L T S DUTY CYCLE

DUTY CYCLE- Controls the percentage of time the output pulse is on out of the time from the start of one output pulse to the start of the next output pulse. TIMER RESET- Resets the seconds counter display to zero. LCD DISPLAYDISPLAY Shows the number of seconds the output of the unit has been active since the last timer reset, the peak output voltage and current, the average battery voltage and current, a fuel gauge type display of the battery voltage, heatsink temperature and waveform settings. AUDIO ALARM- Provides loud audio warning whenever 30 volts or more are present between the anode and cathode and also when the unit is first switched on. W WARNIN G LIGHT- Flashes once per second whenever 30 volts or more are present between the anode and cathode and TIMER also when the unit is first switched on.
PUSH TO RESET

FREQUENCY

Duty cycle and Output Frequency

V O L T S DUTY CYCLE

PERIOD

OUTPUT CONTROL
40 35 30 25 20 45 50 60 35 40 45 70 50 30 80 25 60 90 20 70 100 15 80 2 PULSES 110 10 15 10 120 3 PULSES 5 DC GATED BURST

FREQUENCY

DUTY CYCLE

Clockwise: LCD display; Power/ Emergency Shutdown Switch; Output Frequency and Duty Cycle switches; Cover Latch.

LR-20 Electrofisher v.0.22 Smith-Root, Inc. www.smith-root.com

EMERGENCY SHUTDOWN SWITCH- Turns unit on when the red cover and switch are in the up position. Also serves as an emergency shutdown switch by means of red flipdown cover.

250

300

350 400

200

2 00

VOLT LTA LT TAGE RANGE SWITCH- Controls the output voltage of the VOLTAGE RANGE electrofisher. Voltages between 50 and 990 volts may be selected.
150 100 250 300 200

500

700 50 990

0 25

300 35 0

350

400

50 50

990 990

CATH ATHODE ODE POWER

ATTENTION: FRONT COVER MUST BE CLOSED FOR UNIT TO OPERATE

LR-20 ANODE CONNECTOR - Provides the high voltage connection for the anode electrode.
Backpack Electrofisher

CATHODE

CONTROL

ANODE CONTROL CONNECTOR- Provides the low voltage control connection to the pole switch.

CONTROL ANODE

Left to right: Cathode connector; power cord; control connector; anode connector.

CAT A HODE CONNECTOR- Provides the high voltage AT connection to the cathode electrode. BATT A ERY CONNECTOR- Provides power to the unit from ATT the battery. COVER LAT A CH AND SENSOR- Two over-center toggle AT latches secure the front cover. Cover must be closed and latched before the output of the unit can be activated.
www.smith-root.com

70 0

100

500

150

IMMERSION SENSOR - Automatically turns the output off when water bridges the sensing contacts.
500 700

400

150

0 10

CONTROLS & CONNECTORS

EXTERNAL CONTROLS, CONNECTORS AND SENSORS

USER'S MANUAL

On/Off Switch w/ Emergency off cover

Cover opened to provide access to controls

Connectors left to right: Cathode, Battery, Control, Anode

ON/OFF SWITCH: Located on the right side of the electrofisher under the red emergency off cover. To turn the unit on, raise the cover and push the switch up to the on position. To turn the unit off, press down on the red emergency off cover. ANODE CONNECTOR: Located on the bottom right corner of the electrofisher the large black 2 socket connector provides the high voltage connection for the anode electrode. This connector has a locating lug that assures the anode pole can only be connected one way. The proper connection for the anode pole is with the cable pointing away from the backpack. BA ERY POWER CONNECTOR: Located on the BATT bottom left center of the electrofisher this red and black color coded connector provides power to the unit from the battery*. To connect a battery to the electrofisher, match the colors on the battery connector to the colors on the battery's connector, red to red and black to black**. * C A U T I O N : Before connecting or disconnecting a battery to the unit, make sure the power switch is in the off position, failure to do so may cause damage to the battery and the electrosher. **WARNING: Reversing the connectors will damage the electrosher and may cause serious injury or death.

CA HODE CONNECTOR: Located on the bottom left CAT corner of the electrofisher the large black 2-socket connector provides the high voltage connection to the cathode electrode. This connector has a locating lug that assures the cathode can only be connected one way. The proper connection for the cathode is with the cable pointing away from the backpack. CONTROL CONNECTOR: Located on the bottom right center of the electrofisher the small black 4-socket connector provides the low voltage control connection to the pole switch. This connector has a locating lug that assures that the control connector can only be connected one way. The proper connection for the control connector is with the cable pointing away from the backpack. IMMERSION SENSOR: Located on the bottom left corner of the enclosure behind the cathode connector. The output of the electrofisher is automatically deactivated when these contacts come in contact with water. NOTE: Although the immersion sensor is located above the battery tray of the LR-20, do not submerge the battery; doing so will cause damage to the battery and the electrofisher. FRONT COVER: The clear window cover of the control panel allows easy observation of the controls and display. To open the cover, release the over-center latches at the top and bottom right corners of the electrofisher. NOTE: The front cover must be closed and latched before the output of the unit can be activated.

2009

LR-20 LR-20B BACKPACK ELECTROFISHER

& CONTROLS & CONNECTORS (Cont.)

FRONT TP PANEL CONTROLS AND INDICATO ICA RS ICATO

TIMER RESET: Located on the upper right corner of the front panel. This switch allows the user to reset the 6 digit seconds timer back to 0. DUTY CYCLE: Located on the upper left center of the front panel. This switch controls the percentage of time the output pulse is on out of the time from the start of one output pulse to the start of the next output pulse. When the duty cycle is set to DC, the electrofisher puts out a constant DC voltage determined by the voltage range switch. FREQUENCY: UENCY Located on the upper left of the front panel. UENCY: This switch controls the output frequency or pulses per second of the electrofisher. When the duty cycle switch is set to DC, Gated Burst 2 pulse or Gated Burst 3 pulse, this switch has no effect on the output of the electrofisher. DISPLAY Located in the top center of the front panel. The DISPLAY: display shows the number of seconds the output of the LR-20 has been active since the last timer reset, the output voltage and current and a fuel gauge type display of the battery voltage. The backlight of the LCD display is always on when the electrofisher is on; this allows easy viewing of the display even in deep shadows without the need to open the front cover and turn on another switch.
OUTPUT CONTROL
40 35 30 25 20 45 50 60 70 30 80 25 90 20 100 15 110 10 15 10 120 5 35 40 45 50 60 70 80 2 PULSES 3 PULSES
GATED BURST

TIMER
PUSH

TO RESET

DC

FREQUENCY

DUTY CYCLE

LR-20 Electrofisher v.0.22 Smith-Root, Inc. www.smith-root.com

VOLTAGE RANGE
250 300 350 2000 300 35 400 0 500 150 25 100 700 50 990

400

2 00

50

9 90

70 0

50 0

ATTENTION: FRONT COVER MUST BE CLOSED FOR UNIT TO OPERATE

CATHODE

PES FRONT PANEL - Top to bottom, left to right:

VOLT LTA LT TAGE RANGE SWITCH: Located on the left side of Alarm; Warning Light. the front panel. This 11-position switch controls the output voltage of the electrofisher. Voltages between 50 and 990 volts may be selected. W WARNIN G LIGHT: Located in the bottom center of the front panel. Wide viewing angle, high brightness red LED's flash once per second whenever 30 volts or more are present between the anode and cathode and also when the unit is first switched on. AUDIO ALARM: Located on the right side of the front panel. A high volume audio alarm with volume shutters provides additional warning whenever 30 volts or more are present between the anode and cathode. In addition, the beep rate gives an indication of the power being drawn by the unit. It also sounds when the unit is first switched on.

150

0 10

Backpack LR-20 Electrofisher

CONTROL

ANODE

www.smith-root.com

P PACK FRAME

USER'S MANUAL

P PACK FRAME
The packframe allows for various positions of the shoulder straps and waist belt to fit most people. The straps and belt all have quick release latches that allow the Electrofisher to be removed quickly if the operator falls into deep water or becomes injured*.

Shoulder Strap Adjustment Shoulder Strap

Chest Strap Quick Release

Padded Waist Belt

Pack Frame

Waist Belt Quick Release

*WARNING: Always unfasten the chest strap of the pack before crossing or entering the water. Should you fall into deep water, the chest strap may prevent you from removing the electrosher quickly.

2009

LR-20 LR-20B BACKPACK ELECTROFISHER

&

PACKFRAME QUICK RELEASE - STRAIN RELIEF

QUICK RELEASE SYSTEM

It may be necessary in some circumstances to remove the electrofisher backpack quickly. The LR-20 has an integral quick release pack frame. Just press the latch tabs on the waist belt (1) and shoulder straps (2) and the entire unit falls away. The following procedure illustrates how the quick release system is designed to work:

1. Squeeze the release tabs on hip belt buckle to remove hip belt.

2. Squeeze the release tabs on either shoulder strap. 3. With strap detached, shrug off opposite shoulder strap.

4. This will allow the pack to fall away from you very quickly! Move away from pack as it falls.

CABLE ST STRAIN RAIN R RELIE ELIEF ELIE F CLIPS CLIPS

Fig. 1 - Location of rings Fig. 2 - Right side Fig. 3 - Left side These clips are designed to prevent the anode and cathode cables from traveling beyond their recommended range of motion and to relieve undue strain on the connector plugs.

Make sure that the ring-mounted swivel clip on either side of the packframe is attached to the electrode cables as shown in Figs. 1-3. Using the rings and clips in the manner indicated will transfer the weight of the electrode cables to the packframe and offset the possibility of damaging either cable or their respective connectors. WARNING: Without Cable Strain Relief Clips, the anode and cathode connectors or their cords could become damaged.

www.smith-root.com

OPERA ION OPERAT

OPERA ION OPERAT
Make sure the Electrode ring is clean and shiny. A cloudy, dull-gray Electrode ring will reduce your catch per unit effort and will increase the injury rate of fish. Initial setup of voltage, frequency, and duty cycle should be done outside of your sample area to avoid influencing your statistics. 1.

USER'S MANUAL

Make sure the power switch on the side of the control unit is in the off position (pressed down). Attach the anode and cathode to their output connectors. Attach the smaller connector on the anode cable to the control connector of the unit. Be sure you know the location of the quick release buckles for the backpack, and unlatch the chest strap before entering or crossing the water. Check with each crew member to be sure they know you are ready to turn on the power. Connect the battery. Turn on the power. Do not press the anode switch. Check the operation of the tilt switch by bending forward until the tilt switch activates, (about 55 degrees), and the tilt message appears on the display. Straighten up and the status display should return. If the tilt message does not appear, do not use the electrofisher; send it to Smith-Root for repair. Place a dampened cloth on the immersion sensor contacts located on the lower left-hand corner of the control unit's box, behind the cathode connector. The display should show the immersion warning. When the cloth is removed and the power is turned off and back on, the display should return to the status screen. If the immersion message does not appear, do not use the electrofisher; send it to Smith-Root for repair.
2009

2. 3.

4.

5.

6. 7.

Battery Connector 8.

Immersion Sensor

LR-20 LR-20B BACKPACK ELECTROFISHER

& OPERATION (Cont.)

9.

Set the frequency, duty cycle, and voltage switches to the values you wish to use. If you don't know what values to use, set the switches as shown below and follow the procedure in the next step. NOTE: The front cover of the electrofisher must be closed to activate the output. Frequency 15 Hz. Voltage 50 volts. Duty cycle 10 percent.

OUTPUT CONTROL
40 35 30 25 20 45 50 60 35 40 45 70 50 30 80 25 60 90 20 70 100 15 80 2 PULSES 110 10 15 10 120 3 PULSES 5 DC GATED BURST

TIMER
PUSH

TO RESET

FREQUENCY

DUTY CYCLE

LR-20 Electrofisher v.0.22 Smith-Root, Inc. www.smith-root.com

VOLTAGE RANGE
250 300 350 2000 300 35 400 0 500 150 25 100 700 50 990

400

10. Duty cycle and frequency can have a huge impact on taxis. Do not be timid about changing these settings. In general, lower frequencies are safer for larger fish than higher frequencies. If you are not getting any response from fish at all, then change the settings as follows: a. Increase the voltage switch one position, and try again. Stop increasing voltage when you begin getting a forced response (twitch) from the fish when you press the anode pole switch. b. If fish are not showing taxis, then increase the duty cycle switch one position, and try again. If necessary, repeat this step until you elicit taxis in the fish. If you increase the duty cycle to maximum and still are not getting taxis, then reduce the duty cycle back to 10% and go to the next step. c. Increase the frequency switch one position, and try again. If necessary, go back to step a before increasing frequency again.

2 00

50

990

70 0

500

ATTENTION: FRONT COVER MUST BE CLOSED FOR UNIT TO OPERATE

CATHODE

Front Panel details

OFF

ON

Electrode Pole Safety Switch

150
0 10

Backpack LR-20 Electrofisher

CONTROL

ANODE

www.smith-root.com

USER'S MANUAL
SAFETY FEATURES EMERGENCY SHUTDOWN SWITCH
EMERGENCY

SAFETY

AUDIO ALARM

The audio alarm indicates 2 different operating conditions: 1. Presence of high voltage in the water: Whenever the anode and cathode are in the water and more than 30 volts is present while the unit is on, there will be an audible tone emitted by the alarm. 2. Average power output level:

ON

SHUT DOWN

OFF
09588

The red flip-down toggle switch located on the right side of the control unit is the Emergency Shutdown Switch. This switch is also the main on/off switch for the Electrofisher. To turn the 09588 Shutdown Switch 3.25 X 3.25 (1 ea.) power on, the user must lift the red cover upwards and manually flip the exposed toggle switch to the up position. Since the red cover must first be lifted, it helps to prevent accidentally powering up the unit. Flipping the red cover down will immediately turn the unit off.

From 0 to 49 watts the audio tone pulses once per second.

From 50 to 99 watts the audio tone pulses twice per second.

From 100 to 149 watts the audio tone pulses three times per second. From 150 to 200 watts the audio tone pulses four times per second.

P PACK FRAME QUICK RELEASE

The LR-20 and LR-20B have an integral quick release pack frame. Simply lift one of the two tabs on the shoulder straps while unlatching the waist belt and shrug the entire unit away. CAUTION!: Always unlatch the chest strap of the pack before entering or crossing water. If left latched, this strap may prevent the user from quickly removing the LR-20B in the event of an emergency, such as falling into deep water.

Audio Alarm FLASHING RED LIGHT Bright, long-life LED lamps flash whenever the unit is turned on and 30 volts or more is present between the anode and cathode.

2009

10

LR-20 LR-20B BACKPACK ELECTROFISHER

&

ELECTROFISHING SAFETY

SAFETY QUICK LIST

1. 2. 3. 4. 5. At least two members of the crew must have current first aid and CPR cards. Make sure every member of your crew knows where the nearest hospital is and how to get there or where to go to get help. All members of the crew should have completed an electrofishing course.

Before loading up equipment and heading into the field, make sure every member of the crew knows your evacuation routes in case of an accident. Check the equipment for damaged or missing parts and for proper operation. Never use an electrofisher that is in poor condition or not working correctly as it can present a severe shock hazard. Check the cathode cable for wear and burrs that may cause injury or tear holes in protective clothing. Check the insulation for damage. Replace the cathode as necessary.

6. 7. 8. 9.

Check the anode pole for cracks in the fiberglass and handle assembly. Replace as necessary. Check the curl cord for cracks and abrasion. Do not use a cracked pole or a pole with a damaged curl cord.

10. If you are using chest waders, you should use a wading belt.

Check your boots and high voltage gloves for holes. Boots and gloves must be watertight and without any holes. Repair or replace as necessary.

11. Check all batteries for damage. Never use a damaged battery, as the gelled electrolyte in these batteries is a strong acid and can cause severe chemical burns and damage clothing and the electrofisher. 12. Use only dip nets with non-conductive handles. Never use an anode as a net as it is extremely dangerous to other members of the crew and can cause severe injury to any fish caught with it. 13. Never electrofish alone. 14. Never electrofish when you are tired.

11

www.smith-root.com

USER'S MANUAL

SaFeTy

Electroshing Safety (Cont.)

SAFETY DO'S AND DON'T'S DOs:

1. Always be sure that all personnel are clear of the electrodes before turning on the power. 2. Know how to administer first aid treatment for electrical shock. 3. Wear flotation devices.

15. Never try to reach into deeper pools with the electrodes. If you cant safely wade in an area, it cannot be electrofished with a backpack electrofisher. 16. Only one person on a crew can order the power for the electrofisher to be turned on, and that person is the crew leader. The crew leader is responsible for the safety of everyone on the crew. 17. Any member of the crew can call for or turn off the power to the electrofisher.

4. Have electrical circuits checked only by qualified technicians. 5. Disconnect the power supply when the electrofisher is not in use.

18. If an accident occurs, stop electrofishing and turn off the power to the Electrofisher. The person wearing the backpack Electrofisher should leave the water and take the Electrofisher to shore. The remaining members of the crew should help or attend to the accident victim. Get help for the injured person if necessary. Evaluate what happened and make the necessary procedural or equipment changes before proceeding.

DOnTs:
1. Dont electrofish alone! 2. Dont continue to electrofish if your boots or gloves get wet inside.

19. Never electrofish with spectators on shore. Electric fields can travel large distances through buried pipes, metal culverts, and metal sheet piling. If spectators show up during electrofishing, stop the operation and explain what you are doing. Explain the risks to them being there and ask them to please leave for their own safety. If they refuse to leave, stop electrofishing, load your equipment, and leave the area. 20. WARNING: Operating this equipment in a manner not specified in this manual or with accessories not approved by Smith-Root, Inc. may impair the protection offered by the equipment

3. Dont operate an electrofisher if you have had any prior heart ailments. 4. Dont electrofish when you are tired.

2009

12

LR-20 LR-20B BACKPACK ELECTROFISHER

&

Electroshing Safety (Cont.)

It is the current that passes through the human body that does the damage. The voltage is relevant, because it is the force that pushes the current through the body. Experiments show that 20 to 500 Hz AC current is more dangerous than DC, or higher frequencies of AC. The voltages used by electrofishing gear cause can death by one of three means: Ventricular Fibrillation Ventricular fibrillation is uncoordinated contraction of the muscles of the heart. The heart quivers rather than beats. Electrical current through the chest can cause this condition. Once a person goes into ventricular fibrillation, the only way to stop the quivering is to use a defibrillator that applies a pulse shock to the chest to restore heart rhythm. Cardiopulmonary resuscitation may help to keep a victim alive until he can be defibrillated. Respiratory Arrest The respiratory center is at the base of the skull. Thus, shocks to the head can cause the breathing to stop. Artificial respiration by the mouth-to-mouth method should be used in this case. Asphyxia Asphyxia is caused by contraction of the chest muscles. When a current is above a certain level, a person cannot let go of an electrically hot wire. Currents above this level may not cause ventricular fibrillation but may be enough to cause contraction of the chest muscles. If the current is not stopped, or the victim is not removed from the point of electrical contact, asphyxia will result. Artificial respiration or cardiopulmonary resuscitation may be necessary.

ELECTRICAL SHOCK

PREVENTING ELECTRICAL SHOCK

Electricity needs to have a complete electrical circuit in order for current to flow. The only way that you can get shocked is if you become the electrical conductor to complete the circuit. The current flows from the cathode to the anode through the water. The water is the electrical conductor. If you touched both the anode and the cathode you would become an electrical conductor and complete the circuit path and get a severe electrical shock. If you touch only one of the electrodes, you would not complete the electrical circuit and not get shocked.

WARNING: Touching any electrode is not recommended. Unless all conductive objects you come into contact with are connected to the same electrode, you will be shocked to find a current path that is not obvious, e.g., the water, or the boat.

Preventing electrical shock means preventing electrical current from entering and flowing through parts of the body. The skin is a partial but variable barrier because it offers resistance to the passage of electrical current. Tough skin has more resistance than tender skin, and dry skin more than wet skin. But tough, dry skin alone does not offer enough protection for electrofishing. Rubber linemans gloves rated 1,000V minimum should always be worn. Even while wearing rubber gloves and waders, never touch an electrode while the circuit is energized.

Do not work on the electrical system while the generator is running. Do not enter the water while the current is on during boom shocking operations. A severe electrical shock from electrofishing gear may result in the need for artificial respiration; therefore, it is imperative that no one ever works alone.

To prevent electrical shock, all electrical equipment should be carefully inspected before each field operation. With all electrical equipment in good operating condition, and all insulation, junction boxes, bonding, and connections intact, there is much less danger of receiving an electrical shock.

13

www.smith-root.com

BaTTeries
BaTTery CharGer
The Smith-Root BC-24PS is a revolutionary concept in battery charger design. This high technology, compact device offers a number of benefits not found in conventional chargers. The BC-24PS is a truly automatic charger tailored for maintenancefree batteries as well as other types of lead acid batteries. The BC-24PS has a fully automatic, four-stage charge sequence with an electronically timed routine and a desulfation mode. STAGE 1 DESULFATION: encourages the breakdown of larger sulfate crystals which form during prolonged periods of deep discharge. STAGE 2 CONSTANT CURRENT: applied to achieve the fastest possible return of energy to the battery. STAGE 3 CONSTANT VOLTAGE: temperature compensated with adaptive timing to insure maximum charge for each battery, this stage provides the final 20% of the total charge. STaGe 4 STanDby FlOaT-charGe: this stage will replace standing losses and keep the battery in a full-charged state. Batteries may be left in this state indefinitely provided that they are in a well vented area and the AC input is not subject to frequent or periodic power outages (switched outlet or bad power). Damage to or failure of the battery may cause the charger to stay in high-rate mode with subsequent battery venting. For float-charging situations, consider using a MC-24 charger (not subject to these limitations) for long term battery storage. Time to recharge will vary depending on state of charge, condition of battery and battery size. The rule of thumb is 2 to 3 hours for lightweight, 2.5 to 4 hours for standard weight, and 3 to 6 hours for heavyweight batteries. These charge times are for a battery recently discharged to the low battery cutout on an electrofisher. A fully charged battery placed on a BC-24PS charger may not indicate that it is fully charged for as long as 1 1/2 hours due to the timed charger feature.

USER'S MANUAL

SpeciFicaTiOns
Input............ 120 Volts AC 60Hz, 200 VA Output.....................5 Amps DC 24 Volts Dimensions........6.5"W x 5.25"H x 6.0"D Weight......................................... 9.5 lbs.

2009

14

LR-20 LR-20B BACKPACK ELECTROFISHER

&

BATTERY CARE AND MAINTENANCE

CONNECTORS AND INDICATO ICA RS ICATO

OUTPUT CORD AND CONNECTOR: The connector on the end of the cord is wired to plug directly into the quickdisconnect connector on the battery pack. FRONT PANEL INDICATO ICA RS: The seven front panel ICATO indicator lamps are labeled to indicate the battery's state of charge. (see fig. 7.1) CHARGER OPERAT OPERA ING INSTRUCTIONS This charger is suitable for use with all types of lead acid batteries, including the new types of maintenance free and gelled electrolyte batteries. 1. Connect charger to battery. 2. Connect the charger to the AC power. The state of charge is shown by the LED indicators on the battery charger as follows. The red "Charge" LED will light to indicate that the battery is correctly connected and is charging. During charging, the current flowing into the battery is indicated by the LED Amp Meter. This is the vertical group of four red LEDs located directly above the "Charging" LED. At the start of charge, if the battery is in normal condition, all four red LEDs will be on and will gradually go out in sequence as the charge current drops and the battery approaches full charge. When the battery reaches an 80% level of recharge, the red "Charge" LED will go off and the yellow "80%" LED below it will come on. After a further time interval, the "80%" LED will go off and the green "Ready" LED will come on. The time interval for this final 20% of charge is automatically adjusted by the charger in proportion to the time taken to reach the 80% level. 3. The length of time needed for recharging will depend on the size and depth of discharge of the battery. A minimum of one hour is needed and full charging of a large battery may take up to 12 hours. INPUT POWER CORD: The input power plug is a standard 120VAC three-pin with ground.

BC-24PS Batt. Charger.....04954

4. IMPORTANT SAFETY NOTE: When disconnecting the battery from the charger, switch off or unplug the AC supply to the charger first. This precaution will eliminate any risk of gas explosion due to arcing.
www.smith-root.com

15

USER'S MANUAL

BA ERIES BATT

BATTERY CARE AND MAINTENANCE (CONT.)

STORAGE INSTRUCTIONS

Fully charge batteries before placing in storage. As these batteries will self discharge, we recommend that they be recharged after 3 or 4 months of storage at 20 degrees centigrade. More frequent charging is required at higher storage temperatures and less at lower temperatures (9 months at 0 degrees). Batteries removed from storage should be recharged for a least 48 hours prior to placing back in service. If batteries are stored on a maintenance charger (MC-24), they are always ready for use. 1. When not in use, store the charger indoors in a cool, dry place, preferably with its original packing and carton. 2. Place these instructions with the charger during storage.

24V - 12Ah

MAINTENANCE AND CLEANING

Very little maintenance is required other than protecting the charger from damage and weather. 1. Coil cord when not in use. 2. Clean case and cords with a slightly damp cloth. 3. Examine cords for damage periodically and replace if necessary with manufacturer approved parts.

24V - 7Ah

BATT A ERIES ATT

The electrofisher uses a 24 volt sealed deep cycle battery. Understanding the proper care of this battery will reduce problems in the field. Batteries should never be allowed to remain in a discharged state and should be recharged as soon as possible after use. Batteries should be charged until the green lamp on the charger comes on. Charging Problems: Some older batteries may not charge within 24 hours. If a battery has been left in a discharged condition for a while, it may not take a charge. If you suspect that the battery has been left discharged, charge it for 48 hours and then discharge it with the electrofisher. If the battery is not taking a charge, it will not operate the electrofisher for very long. Sometimes by cycling the battery a few times it will start taking a charge again. 24V - 2.2Ah

24V - 12Ah Battery...........06682 24V - 7Ah Battery..............06681 24V - 2.2Ah Battery...........07466

2009

16

LR-20 LR-20B BACKPACK ELECTROFISHER

& BATTERY CARE AND MAINTENANCE (CONT.)

1. Keep the battery charged! The most frequent cause of battery failure is not recharging after each use. 2. Heat kills batteries. Avoid storage in exceedingly warm areas. Recommended operating temperatures are between 5 and 35 degrees C (maximum - 15 to 50 degrees C). The energy available on a given discharge cycle decreases at low temperatures and increases at higher than normal temperatures. Increased temperatures increase the gradual processes of very slow corrosion which normally occur in all lead acid batteries. 3. Avoid heavy vibrations or shocks, which may cause internal damage. Foam packing is cheap insurance. 4. Avoid contact with oils or solvents which may attack the battery case (ABS plastic resin). Clean with soap and water only. 5. Do not crush, incinerate or dismantle the battery. The electrolyte contains sulfuric acid which can cause serious damage to eyes and skin. Dispose of old batteries at a battery recycler.

BaTTery Tips & PrecauTiOns

Note that all batteries should be charged after each use even if the battery was only slightly discharged (these batteries do not have a memory). Total number of charge/ discharge cycles possible varies inversely with depth of discharge on each cycle. Over-discharging or completely discharging the battery will greatly reduce the cycles possible, and a battery left in a discharged condition may be ruined. For this reason, batteries should never be allowed to remain in a discharged state. Recharge as soon as possible after each use. Service Life: Batteries which have been properly maintained should last 3 to 5 years depending on ambient temperature, depth of discharge (D.O.D.) and number of cycles (for Smith-Root batteries to maintain at least 80% of original capacity, they are rated 230 cycles for 100% D.O.D., 470 cycles for 50% D.O.D. or 1100 cycles for 30% D.O.D.). Batteries which have reached this end of life condition may still be useful where shorter operating times are appropriate. Shipping: These batteries conform to the UN2800 classification as "Batteries, wet, non-spillable, electric storage." They conform to the International Air Transport Association (I.A.T.A.) Special Provision A67, classifying them as non-dangerous goods and are therefore exempt from the subject regulations for dangerous goods and are acceptable for transport on both cargo and passenger aircraft.
Reference: I.A.T.A. Dangerous Goods Regulations, 35th Edition, Jan 1, 1994 Section 4.4, Special Provisions:

17

www.smith-root.com

USER'S MANUAL

BATTERIES

BATTERY CARE AND MAINTENANCE (CONT.)

BATTERY SPECIFICATIONS
RaTinG: Batteries are rated at the current which will reduce the voltage per cell to 1.67 volts in 20 hours. The heavyweight battery has a 12 amp hour rating. However, its life at 100 watt continuous would be only 120 minutes. As the discharge current is increased, the efficiency and relative capacity decrease.

Life 20 hr 10 hr 5 hr 1 hr 30 min 15 min

Load 0.60A 1.05A 1.95A 7.20A 12.00A 20.00A

Capacity 12.0Ah 10.5Ah 9.7Ah 7.2Ah 6.0Ah 5.0Ah

Fig. 1: Relative capacity of 12Ah deep cycle battery.

BaTTery LiFe: Each time you cycle a battery it loses some of its ability to take a charge. Deep cycle batteries are capable of being charged and discharged from 100 up to 1,000 times, depending on the depth of the discharge and the type of charger used. Service life and shelf life are both adversely affected by warmer temperatures.

Fig. 2: Discharge curves for 12Ah and 7Ah batteries.

BaTTery STOraGe: Batteries stored at room temperature will self- discharge at 3% to 6% per month. Storage temperature above 20C should be avoided. Shelf life can be increased by storing at lower temperatures, but store at above -30C to prevent freezing. Batteries should be fully charged before storing and should be recharged every four months.

Fig. 3: Effect of temperature on battery life.

EFFecTs OF TemperaTure: The temperature at which a battery is used also affects the relative capacity of the battery. Figures 3 and 4 show that in cold weather the shocking time will be less and the battery will have less capacity.

Fig. 4: Effect of temperature on capacity.

2009

18

LR-20 LR-20B BACKPACK ELECTROFISHER

&

BATTERY MAINTENANCE & DIAGNOSTIC EQUIPMENT

The Smith-Root MC-24 Maintenance Charger (sold separately) is specifically designed for proper battery maintenance and storage.

MC-24 MAINTENANCE CHARGER

MC-24 Maintenance Charger

Trickle charging optimizes battery shelf life by reducing cell deterioration. Keeping batteries fully charged can greatly increase battery life. The MC-24 eliminates the hassle of shuffling batteries from shelf to charger and keeps batteries properly charged and ready for service. With the built-in battery evaluation load test function and maximum charge indicators, you can see the state of charge and condition of each battery and identify low charged and worn-out batteries. Charging batteries using the MC-24 takes between two and four days. It is also an excellent, cost-effective alternative to purchasing multiple battery chargers because it can recharge four batteries at once.

BAT BAT T-01 -01 BA BATT TTERY ANALYSIS TOOL

BAT-01 Battery Analysis Tool

The Battery Analysis Tool (sold separately) operates in conjunction with the BC-24PS Battery Charger. It tests all models of 24V backpack batteries (adaptors included) and in a clear and concise manner gives the usable battery life remaining. This tool is not to be used during each charge / discharge cycle, but rather is intended to be used a few times a year, just prior to actually using the batteries. It may also be used to test accurately any Smith-Root 24 Volt battery where the battery condition is either unknown or is questionable. In practice, The Battery Analysis Tool is plugged into a standard Smith-Root BC-24PS and also the battery under test. The battery will begin to charge as soon as the charger is plugged in. (Do not use an MC-24 Maintenance Charger for this test.)

BAT-01 Battery Analysis Tool MC-24 Maintenance Charger ............................................ 06811 BAT 01 Battery Analysis Tool .................................................. 08041

19

www.smith-root.com

USER'S MANUAL
ELECTRODE POLE TESTING

ELECTRODES

ElecTrODe POle TesTinG

1. Connect an ohmmeter to the pins in the larger connector. The meter should read 0 ohms. 2. Leave one lead of the ohmmeter connected to one of the pins in the large connector and connect the other lead of the meter to the metal socket in the bottom end of the pole. The meter should read 0 ohms. 3. Refer to graphic on left. Connect one lead of the ohmmeter to pin 1 of the small connector. Connect the other lead of the meter to pin 2 of the small connector. The meter should read infinite ohms. 4. Press the operator switch down against the rubber handle of the pole. The meter should read 0 ohms. If the pole fails any of the tests above, the pole needs to be replaced. If the pole passes all of the tests above, then the problem is in the electrofisher and it should be returned to the factory for repair. CATHODE TESTING
Front view of Control Connector on end of Y-cord.

CaThODe TesTinG
1. Set your multi-meter to measure resistance and connect leads to the left and right pins of the connector on the end of the cathode cable. The meter should display close to 0 ohms between the 2 pins. 2. Move one of the leads to the bare metal cable. Again the meter should display close to 0 ohms between the pin in the connector and the bare cable. Flex the cable along its insulated length and watch the meter reading as you do. Be careful to keep the ohmmeter securely connected while flexing the cable. If the meter reading changes significantly or jumps, the cable should be replaced.

Front view of Cathode Connector on end of Y-cord.

2009

20

LR-20 LR-20B BACKPACK ELECTROFISHER

&

ELECTRODE POLE AND CATHODE TESTER

ElecTrODe POle & CaThODe TesTer

This test device allows customers using Smith-Root type LR-24, LR-20 and Model 12/15 backpack Electrofishers to test their anode poles and cathodes (rat-tails) in a simple, concise manner that requires minimal interpretation. The test device is designed to give a clear go no go test of both anode poles and cathodes, as well as some limited indication of what is likely wrong with the item being tested. The Electrode/Cathode Tester is simple to use, and negates the need for any other test equipment (such as a volt-meter or continuity tester). It is selfcontained and except for periodic replacement of the battery requires no service or calibrations. The tests can be performed Electrode Pole/Anode pole tester by one person with no assistance.

Electrode Pole & Cathode Pole Tester..............08115

21

www.smith-root.com

USER'S MANUAL

SETTINGS
LR-20 OPERATION HINTS

Make sure the Anode ring is kept clean. Anode rings are made from aluminum and will eventually develop an oxide coating that will give the ring a dull appearance. This coating impairs the transfer of electricity from the electrode to the water and can be removed with fine steel wool. To maximize battery life, always connect batteries to their charger as soon as possible after use. Resist the temptation to put a net on Anode rings. Nets have the following very undesirable characteristics: 1. They present a safety hazard since it can place the operator's hands unnecessarily close to the electrode when removing fish. 2. The intensity of the electric field increases as the fish to electrode distance decreases. Therefore, the risk of injury to the fish is greatly increased with the use of an Anode-ring net. 3. They make the Anode ring more difficult to clean. CLEANING AND MAINTENANCE The LR-20 enclosure and suspension system may both be cleaned with warm water and a mild soap solution. Spray the solution on the area to be cleaned and then wipe with a soft cloth. CAUTION: Do not use solvents on the case of the LR-20 as they may cause permanent damage to the LR-20. EXTenDeD MainTenance PrOGram The extended maintenance program is a service contract offered to customers who have purchased SRI electrofishing equipment directly from our factory. It can be purchased for equipment that is past its standard one-year warranty. Older equipment is subject to eligibility parameters such as hours/years in service. Our Smith-Root factory technicians will perform cleaning of internal component parts, electronic repairs and calibration once (1) per year. During this maintenance period, upgrades to current specifications will be performed to factory standards. The unit will be recertified and issued an SRI certification label. All labor and materials will be included in the yearly inspection. Contact Smith-Root, Inc. for additional information.

2009

22

LR-20 LR-20B BACKPACK ELECTROFISHER

&

MODEL 12-B/15-D SETTING CHART Use this chart to convert settings used with the 12-B or 15-D to settings on the LR-20. Example: If H2 were used with the model 12-B, the corresponding settings for the LR-20 would be 50Hz at 5% Duty cycle. Note that the LR-20 does not have pulse width settings.
PULSE WIDTH
Period Width

Standard Pulses Model 12-B and 15-D

Mode Switch A B C D E F G H I J
Burst = 3 pulses

V O L T S
Volts

1 1Hz 5Hz 10Hz 15Hz 20Hz 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz 90Hz 100Hz 110Hz 120Hz 2ms 1ms 500us 500us 500us 500us 500us 500us 500us 500us 500us 500us 100us 100us 100us

2 3ms 2ms 1ms 1ms 1ms 1ms 1ms 1ms 1ms 1ms 1ms 1ms 500us 500us 500us

3 4ms 3ms 2ms 2ms 2ms 2ms 2ms 2ms 2ms 2ms 2ms 2ms 1ms 1ms 1ms

4 6ms 4ms 4ms 4ms 4ms 4ms 4ms 4ms 4ms 4ms 4ms 4ms 2ms 2ms 2ms

5 7ms 6ms 6ms 6ms 6ms 6ms 6ms 6ms 6ms 6ms 6ms 6ms 4ms 4ms 3ms

6 8ms 8ms 8ms 8ms 8ms 8ms 8ms 8ms 8ms 8ms 8ms 8ms 6ms 6ms 4ms

Frequency FREQUENCY = 1 Period

Pulse width x Frequency x 100 = Duty Cycle in %

Duty cycle and Output Frequency

Time

Standard pulse
V O L T S
Volts

DUTY CYCLE
Period Width Between

PERIOD

K L M N O

Burst rate = 1 Period

Time

Gated Burst

Gated burst

See diagrams at left for an explanation of Duty Cycle, Output Frequency and Gated Bursts.. Duty Cycle Percent LR-20/LR-20B
Frequency 10 15 20 25 30 35 40 45 50 60 70 80 90 100 110 120 5 5ms 3.3ms 2.5ms 2ms 1.7ms 1.4ms 1.3ms 1.1ms 1ms 0.8ms 0.7ms 0.6ms 0.6ms 0.5ms 0.5ms 0.4ms 10 10ms 6.7ms 5ms 4ms 3.3ms 2.9ms 2.5ms 2.2ms 2ms 1.7ms 1.4ms 1.3ms 1.1ms 1ms 0.9ms 0.8ms 15 15ms 10ms 7.5ms 6ms 5ms 4.3ms 3.7ms 3.3ms 3ms 2.5ms 2.1ms 1.9ms 1.7ms 1.5ms 1.4ms 1.3ms 20 20ms 13.3ms 10ms 8ms 6.7ms 5.7ms 5ms 4.4ms 4ms 3.3ms 2.9ms 2.5ms 2.2ms 2ms 1.8ms 1.7ms 25 25ms 16.7ms 12.5ms 10ms 8.3ms 7.1ms 6.2ms 5.6ms 5ms 4.2ms 3.6ms 3.1ms 2.8ms 2.5ms 2.3ms 2.1ms 30 30ms 20ms 15ms 12ms 10ms 8.6ms 7.5ms 6.7ms 6ms 5ms 4.3ms 3.8ms 3.3ms 3ms 2.7ms 2.5ms 35 35ms 23.3ms 17.5ms 14ms 11.7ms 10ms 8.7ms 7.8ms 7ms 5.8ms 5ms 4.4ms 3.9ms 3.5ms 3.2ms 2.9ms 40 40ms 26.7ms 20ms 16ms 13.3ms 11.4ms 10ms 8.9ms 8ms 6.7ms 5.7ms 5ms 4.4ms 4ms 3.6ms 3.3ms 45 45ms 30ms 22.5ms 18ms 15ms 12.9ms 11.3ms 10ms 9ms 7.5ms 6.4ms 5.6ms 5ms 4.5ms 4.1ms 3.8ms 50 50ms 33.3ms 25ms 20ms 16.7ms 14.3ms 12.5ms 11.1ms 10ms 8.3ms 7.1ms 6.3ms 5.6ms 5ms 4.6ms 4.2ms 60 60ms 40ms 30ms 22ms 20ms 17.1ms 15ms 13.3ms 12ms 10ms 8.6ms 7.5ms 6.7ms 6ms 5.5ms 5ms 70 70ms 46.7ms 35ms 24ms 23.3ms 20ms 17.5ms 15.6ms 14ms 11.7ms 10ms 8.8ms 7.8ms 7ms 6.4ms 5.8ms 80 80ms 53.3ms 40ms 26ms 26.7ms 22.9ms 20ms 17.8ms 16ms 13.3ms 11.4ms 10ms 8.9ms 8ms 7.3ms 6.7ms GB 2 Pulse 4Hz 62.5ms @ 1Hz rate 125ms 12.50% Overall Duty Cycle GB 3 Pulse 4Hz 62.5ms @ 1Hz rate 187.5ms 18.75% Overall Duty Cycle

23

www.smith-root.com

USER'S MANUAL

SPECIFICAT ICA IONS ICAT

SPECIFICATIONS
Conductivity Range Battery Output Voltage Ranges Output Power Output Frequency Output Duty Cycle Overload Protection Electrodes Timer Metering 10 1500 microsiemens per centimeter 24 volt 12AH sealed gel type 50, 100, 150, 200, 250, 300, 350, 400, 500, 700, 990 200W (LR-20) or 400W (LR-20B) maximum continuous 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 110, 120 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, GB 2 pulse, GB 3 pulse, DC 15A (LR-20) or 25A (LR-20B) electronic breaker, and 40A safety fuse 6 2-piece pole, adjustable 11 inch ring, Stainless steel rattail cathode 6 digit computer controlled seconds counter Peak output current Peak output voltage Battery voltage with fuel gauge type display Battery current

Weight & Dimensions

33 lbs. 13" L X 13 3/4" W X 29 3/4" H

2009

24

SMITH-ROOT, INC.
14014 NE Salmon Creek Ave. Vancouver, WA 98686 USA 360.573.0202 Voice 360.573.2064 FAX [email protected]

www.smith-root.com