Nemo Analyser

NEMO ANALYZER
Prepared By:
Gaurav Tiwari
CONTENT
Introduction. Working on Nemo Analyzer. Workspace.

. What is Nemo analyzer. Nemo Analyze is a powerful post-processing and reporting tool for planning, optimizing, and maintaining cellular networks. Nemo Analyze serves many purposes from network overview to problem solving and report generation.
What is requirement of Nemo tool Nemo analyzer is basically a post processing tool used Drive test data(Logs) analyzing
WORKING NEMO ANALYZE Double-click the Nemo Analyze.exe icon in My Computer or select it from the Start menu When First Time program starts, the window below will open. In the Welcome to Nemo Analyze workbook, you will find useful information about Nemo Analyze, links to related documents, and shortcuts to loading measurement and BTS files.
Work space Work space area
Parameter Network
WORKSPACE The Workspace view consists of five pages: 1- Measurements. 2- Base Stations. 3- Maps. 4- Polygons. 5- Data Source Files. 6- Reports
MEASUREMENTS
The Measurements page in the Workspace is divided into three sections: Folders, Folder Contents, and the Parameter tree. The folders include the All Measurements folder, which shows all the files that are currently in the database, and other user-defined folders Folder Contents displays a list of all measurements in the folder selected in the Folders section. The name of the measurement device is also displayed when the mouse is hovered over a measurement
The Parameter Tree shows all available parameters and KPIs for the selected file, measurement, or folder, depending on the selections in the other two sections
Work space
BTS map
Data source file
Reports
WORKSPACE FILTERS Workspace filters enable the user to locate measurement files, parameters, maps, base stations, etc.
WORKSPACE FILTERS
Loading a log File to Nemo analyzer File | Measurement | Open [Measurement]. From the Open dialog box, select the Logs files you want to add to the database and click Open. Note that adding files to the database may take several minutes depending on the number and size of the files. Note that all the files need to have unique file names. Note that the file names of Nemo measurement files must follow the format file name i.e. *.nmf,*.dt,*.ft.
File tab
Database l
Open window
File format
You can check the number of files added to database by clicking the data loader tab .
Status bar
ORGANIZE MEASUREMENTS Added Logs files go into the All Measurements folder. If you have a lot of log files of different cities ,just make subfolders. By doing this you can conveniently handle and organize large sets of log files . Go to View , select Organize Measurements, and right-click on the All Measurements folder in the Organize Measurements and add folder option appear select it and put the name .
Put the file name
JOINED LOG FILES To join separate Log files into a joined file. click on sub-Folder(gaurav ) ,on left window, under the tool all log files in the sub folder appears /select all with the help of shift key/Right click on selected file/join option appears /click join/Put Right click to join logs Name
Put Name for joined logs
Joined Logs are identified with a symbol. As clear from below picture. Gaurav Techmahindra is the joined log file.
Joined log file
IEWING MEASUREMENT DATA Log data can be viewed in different kinds of data views, such as graphs, grids, numerical views, and maps. The fastest way to view Drive Log data is through the Parameter Tree. To open a parameter in its default view, select the relevant Log files in the Workspace and then double-click a parameter in the parameter tree. It gives you default values As clear in Below picture. If you want to open the parameter in some other type of view, right-click on a parameter in the parameter tree and select the view type from the popup menu. You can also drag and drop parameters in data views from the Parameter Tree. As clear in Below picture
Showing detail of selected parameter(in this case Desired parameter(double click here ) BCCH) Layer 3 message for this parameter (BCCH)
Selected file for desired parameter(Gaurav Techmahindra)
Default View of Parameter Window
Selected Log file
Option for Desired View
Window to get Desired View
For example If you want to open Specific parameter in Map view just go to option map and click
After doing the above you will get the Map View of desired parameter as clear from below picture.
FILTERING PARAMETER FOR DESIRED REGION With parameter filtering it is also possible to get Data on a user defined area, i.e. by area selection. For doing the same Right-click on the parameter and select Open With Filters In | Map. An empty workbook and the Analyze Wizard - Fill Parameters window Appears /Select a map in the Filename field
Map option
Open with filter
Now after clicking the Map option following window appears .
Now in select polygon area window /click file lookup(.)/find desired area (digital map )/divide it into Zones with help polygon select option
Select Map
Save the Area for desired Name
Selected area
Polygon select option
THANK YOU
Next is MapInfo 8.5

Nemo Analyser

Uploaded by

Copyright:

Available Formats

Nemo Analyser

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nemo Analyser

Uploaded by

Copyright:

Available Formats

NEMO ANALYZER

Work space Work space area

Put the file name

Put Name for joined logs

Joined log file

Selected file for desired parameter(Gaurav Techmahindra)

Default View of Parameter Window

Selected Log file

Option for Desired View

Window to get Desired View

Open with filter

Now after clicking the Map option following window appears .

Save the Area for desired Name

Polygon select option

You might also like